BC50I – Box PC for Industrial Applications

BC50I – Box PC for Industrial Applications
Embedded Solutions
for Transportation and Industry
www.men.de/products/09BC50I.html
BC50I – Box PC for Industrial Applications
n AMD Embedded G-Series Dual-Core APU
n 2 Gigabit Ethernet
n 2 USB 2.0
n 2 DisplayPort® outputs, full HD with each
display
n WLAN, UMTS, GPS, GSM, HSDPA, EDGE, LTE
via 1 PCI Express® Mini Card slot
n 2 Slots for IBIS, GPS, RS232, RS485, RS422
n 1 CAN Bus interface optional
n 24 VDC nom. (16 to 36 V)
n -40 to +70°C operating temperature
n Fanless and maintenance-free design
The BC50I is a maintenance-free box computer that
has been designed for independent use or as display
computer electronics for use in industrial applications,
e.g. for machine control, surveillance or commercial
vehicles or robotics.
The BC50I supports up to two DisplayPort® interfaces with a maximum
resolution of 2560x1600 each. The DisplayPort® interfaces and all other
I/O are available at the unit's front panel on standard connectors like
USB, 9-pin D-Sub (optional serial I/O), RJ45 (Gigabit Ethernet) and
DisplayPort®.
It is powered by an AMD Embedded G-Series APU
(Accelerated Processing Unit), the T48N, running at
1.4 GHz. The G-Series combines low-power CPUs and
advanced GPUs, in this case an AMD Radeon™ HD
6310, into a single embedded device.
On the inside, the system offers one PCI Express® Mini card slot with a
SIM card slot. The necessary antenna connectors can be made available
at the front panel.
The use of the Embedded G-Series makes for high
scalability in CPU (single/dual core) and graphics
performance (various Radeon™ GPUs or none at all).
The BC50I is equipped with 2 GB of DDR3 SDRAM and
offers SD card and mSATA slots. A SATA hard-disk/solidstate drive can be installed within the housing as an
option.
The BC50I comes with its own integrated 24 VDC nom. (16 to 36 V)
power supply. The power can be switched on and off using an ignition
signal on the power connector, and a run-down time after switching off
the power can be adjusted by software.
The combination of the various CPU/GPU options with the available
selection of external interfaces (realized via separate graphics and I/O
interface boards within the system) makes for an extremely flexible
system design that can quickly be tailored to a vast number of
applications.
The system is designed for fanless operation at
temperatures from -40 to +70°C, its special aluminum
housing with cooling fins serves as a heat sink for the
internal electronics and in this way provides conduction
cooling.
BC50I Data Sheet / 2013-02-06
Page 1
Embedded Solutions
for Transportation and Industry
www.men.de/products/09BC50I.html
Diagram
F
Power Supply
F
F
2 GB
DDR3 SDRAM
Front
connector
B
On-board connector
Options
SA
SA-Adapter
DisplayPort 1
F
T48N
AMD G-Series
CPU
DisplayPort 2
PCIe
PCI Express®
Mini Card Slot
SIM
Card Holder
F
F
USB
F
USB 2.0
F
USB 2.0
F
10/100/1000Base-T
Ethernet Controller
F
10/100/1000Base-T
Ethernet Controller
USB
SD Card Slot
SPI
Boot Flash
PCIe
PCIe
A55E
AMD G-Series
Controller Hub
CAN
GPIO
SGPIO
SATA Slot
SATA
FPGA
SATA
SA
F
B
SA
F
UART
UART
mSATA Slot
B
UART
UART
BC50I Data Sheet / 2013-02-06
Page 2
Embedded Solutions
for Transportation and Industry
www.men.de/products/09BC50I.html
Technical Data
CPU
n
AMD Embedded G-Series T48N
o Dual-Core
o 1.4 GHz processor core frequency
o 1066 MT/s DDR3 Speed
o Accelerated Processing Unit (APU), also includes GPU (see Graphics)
Controller Hub
n
AMD A55E
Memory
n
64 KB L1 and 512 KB L2 cache
2 GB DDR3 SDRAM system memory
o Soldered
n
Mass Storage
n
n
n
Graphics
n
n
n
Front I/O
n
n
n
n
n
1 PCI Express® Mini Card slot
n
n
n
Real-Time Clock
BC50I Data Sheet / 2013-02-06
n
One SD card slot
o Via USB
One mSATA slot
o SATA Revision 3.x support
o Transfer rates up to 600 MB/s (6 Gbit/s)
Serial ATA (SATA)
o One port for hard-disk/solid-state drive mounted within the unit's housing
o SATA Revision 3.x support
o Transfer rates up to 600 MB/s (6 Gbit/s)
AMD Radeon™ HD 6310
o Dual independent display support
®
o Dual DisplayPort
o Maximum resolution: 2560x1600
o Embedded in T48N APU
3D Graphics Acceleration
®
o Full DirectX 11 support, including full speed 32-bit floating point per component operations
o Shader Model 5
o OpenCL™ 1.1 support
®
o OpenGL 4.0 support
Motion Video Acceleration
o Dedicated hardware (UVD 3) for H.264, VC-1 and MPEG2 decoding
o HD HQV and SD HQV support: noise removal, detail enhancement, color enhancement, cadence
detection, sharpness, and advanced de-interlacing
o Super up-conversion for SD to HD resolutions
2 DisplayPort® 1.1a interfaces
o AUX channels and hot plug detection
2 Gigabit Ethernet
o Via RJ45 connectors
2 USB 2.0
o Via Series A connector
2 SA-Adapter™ slots for serial I/O
o RS232, RS485, RS422, IBIS or GPS possible on both slots
o SGPIO switchable by software on one slot
o CAN bus optional on one slot
8 LEDs
o 4 for Ethernet link and activity status
o 2 user LEDs
o 1 status LED
o 1 power OK LED
For functions like WIFI, WIMAX, GSM/GPRS, UMTS
1 SIM card slot
PCI Express® and USB interface
Buffered by Gold Cap for up to 12 h
o 72 h as an option
Page 3
Embedded Solutions
for Transportation and Industry
www.men.de/products/09BC50I.html
Technical Data
Electrical Specifications
n
n
Mechanical Specifications
n
n
n
Environmental Specifications
Supply voltage:
o 24 VDC nom. (16 to 36 V)
o Ignition pin for power on and off
o Run-down time after power-off
Power consumption: up to 35 W (with PCI Express® Mini Card)
Dimensions: approx. 250 mm x 220 mm x 44.1 mm
Weight: 1.8 kg
Front protected according to IP20
n
Temperature range (operation):
o -40°C to 70°C
o Fanless operation
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300 m to +3,000 m
Shock: 50 m/s², 30 ms
Vibration (function): 1 m/s², 5 Hz - 150 Hz
Vibration (lifetime): 7.9 m/s², 5 Hz - 150 Hz
Conformal coating of internal components on request
MTBF
n
tbd @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety
n
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
n
Conforming to EN 55022 (radio disturbance), IEC 61000-4-2 (ESD) and IEC 61000-4-4 (burst)
BIOS
n
InsydeH2O™ UEFI Framework
Software Support
n
Windows® 7
Windows® Embedded Standard 7
Windows® XP Embedded
Linux
For more information on supported operating system versions and drivers see Downloads.
n
n
n
n
n
n
n
n
n
n
n
n
BC50I Data Sheet / 2013-02-06
Page 4
Embedded Solutions
for Transportation and Industry
www.men.de/products/09BC50I.html
Configuration & Options
Standard Configurations
Article No.
APU
Graphics
Memory
Input Voltage
Antenna
Connectors
SATA HDD/SSD
09BC50I00
AMD T48N, 1.4
GHz Dual Core
(18W)
AMD Radeon HD
6310
2 GB DDR3-1066,
64KB L1 cache,
512kB L2 cache
24 VDC nom.
No
No
Options
APU
n
n
n
n
n
n
n
n
Memory
n
n
AMD T56N, 1.65 GHz Dual Core, 18W, AMD Radeon™ HD 6320
AMD T52R, 1.5 GHz Single Core, 18W, AMD Radeon™ HD 6310
AMD T48N, 1.4 GHz Dual Core, 18W, AMD Radeon™ HD 6310
AMD T40N, 1.0 GHz Dual Core, 9W, AMD Radeon™ HD 6290
AMD T44R, 1.2 GHz Single Core, 9W, AMD Radeon™ HD 6250
AMD T40E, 1.0 GHz Dual Core, 6.4W, AMD Radeon™ HD 6250
AMD T40R, 1.0 GHz Single Core, 5.5W, AMD Radeon™ HD 6250
AMD T16R, 615 MHz Single Core, 4.5W, AMD Radeon™ HD 6250
Up to 4 GB DDR3 SDRAM system memory
SATA hard-disk/solid state drive (mounted within housing)
Graphics
n
Maximum resolution depending on GPU
®
o 2560x1600 (all DisplayPort interfaces) with Radeon™ HD 6310 and 6320
®
o 1920x1200 (all DisplayPort interfaces) with Radeon™ HD 6250 and 6290
I/O
n
Antenna connectors
®
o For functions like WIFI, WIMAX, GSM/GPRS, UMTS, LTE in combination with PCI Express Mini Card
o Reverse SMA connector
Environmental Specifications
n
Temperature range (operation):
o -40°C to 85°C (screened) with wider housing with additional cooling fins
As the product concept is very flexible, there are many other configuration possibilities. Please contact our sales team if you do not find your
required function in the options. Please note that some of these options may only be available for large volumes.
BC50I Data Sheet / 2013-02-06
Page 5
Embedded Solutions
for Transportation and Industry
www.men.de/products/09BC50I.html
Ordering Information
Standard BC50I Models
09BC50I00
Industrial box computer with dual graphics connection, 24 VDC PSU, AMD Dual Core
T48N, 1.4 GHz, 2 GB RAM, SD card slot, mSATA slot, 2x DisplayPort®, 2x Gb Ethernet
RJ45, 2x USB, 2x SA-Adapter™ slot (UARTs, fieldbuses), 1x PCI Express® Mini card slot, 1x
SIM card slot, -40..+70°C screened
Memory
0751-0047
SD card, 4GB, -40..+85°C
0751-0051
SSD mSATA, 8 GB, -40..+85°C
0754-0007
SSD SATA 256 GB, 2.5" MLC, 0..+70°C
08SA01-06
RS232, not optically isolated, -40..+85°C screened
08SA02-07
RS422/485, full duplex, optically isolated, -40..+85°C screened
08SA03-01
RS232, optically isolated, -40..+85°C screened
08SA08-01
CAN ISO high-speed, optically isolated, -40..+85°C screened
08SA15-00
8 binary I/O channels, -40..+85°C with qualified components, no RoHS
08SA22-00
IBIS master SA-Adapter™, -40..+85°C screened
08SA22-01
IBIS slave SA-Adapter™, -40..+85°C screened
05BC01-00
Mechanics kit for BoxPC: 19'' mounting kit
0780-0005
DisplayPort® to DVI-D adapter, 20 cm
0780-0006
Active DisplayPort® (DP) to single link DVI-D adapter, 20cm, max. resolution 1920x1200,
AMD / ATI Eyefinity technology
0781-0002
HF antenna cable with U.FL connector to RP-SMA connector, 200 mm
0799-0003
UMTS PCIe® Mini Card GTM661W, half-size card with adapter for full-size slot, -10°
C..+55°C operating temperature, -40°C..+85°C storage temperature
Note: when using wireless modules the R&TTE Guide of the EU has to be observed. See
the R&TTE website
For the module's driver see Option's website
0799-0004
WLAN PCIe® MiniCard 6205, 802.11n 2x2 MIMO, 2.4 GHz and 5 GHz, half-size card
with adapter for full-size slot, operating temperature 0°C..+80°C, storage temperature
-40°..+85°C
Note: when using wireless modules the R&TTE Guide of the EU has to be observed. See
the R&TTE website
For the module's driver see Intel®'s website
08AE84-00
Carrier for 2.5" HDD/SSD SATA disk, -40°..+85°C with qualified components
SA-Adapters™
Miscellaneous Accessories
Software: Windows®
BC50I Data Sheet / 2013-02-06
This product is designed to work under Windows®. See below for potentially available separate software
packages from MEN.
10F014-78
Windows® XP Embedded BSP (MEN) for F11S, F14, F15, F17, F18, F19P, F21P, G20, XM1,
XM1L, XM2, MM1, MM2, SC21, SC24, DC1, DC2, RC1 and BC50M
10Y000-78
Windows® Embedded Standard 7 BSP for F11S, F19P, F21P, G20, XM1L, XM2, MM1,
MM2, SC21, SC24, BC50M, F206, F210, F215, F216, G215, P506, P507 and P511
13T025-70
Windows® XP GPU and chipset driver (AMD) for BC50M and SC24
13T026-70
Windows® Vista™ / Windows® 7 GPU and chipset driver (AMD) for BC50M, SC24 and
G214
Page 6
Embedded Solutions
for Transportation and Industry
www.men.de/products/09BC50I.html
Ordering Information
For operating systems not mentioned here contact MEN sales.
Documentation
Compare Chart Box and Panel PCs » Download
Contact Information
Germany
France
USA
MEN Mikro Elektronik GmbH
Neuwieder Straße 3-7
90411 Nuremberg
Phone +49-911-99 33 5-0
Fax +49-911-99 33 5-901
MEN Mikro Elektronik SA
18, rue René Cassin
ZA de la Châtelaine
74240 Gaillard
Phone +33 (0) 450-955-312
Fax +33 (0) 450-955-211
MEN Micro, Inc.
24 North Main Street
Ambler, PA 19002
Phone (215) 542-9575
Fax (215) 542-9577
[email protected]
www.men.de
[email protected]
www.men-france.fr
[email protected]
www.menmicro.com
The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are
trademarks or registered trademarks of their respective holders.
MEN is not responsible for the results of any actions taken on the basis of information in the publication, nor for any error in or omission from the publication.
MEN expressly disclaims all and any liability and responsibility to any person, whether a reader of the publication or not, in respect of anything, and of the consequences of anything,
done or omitted to be done by any such person in reliance, whether wholly or partially, on the whole or any part of the contents of the publication.
The correct function of MEN products in mission-critical and life-critical applications is limited to the environmental specification given for each product in the technical user manual.The
correct function of MEN products under extended environmental conditions is limited to the individual requirement specification and subsequent validation documents for each product
for the applicable use case and has to be agreed upon in writing by MEN and the customer.Should the customer purchase or use MEN products for any unintended or unauthorized
application, the customer shall indemnify and hold MEN and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses,
and reasonable attorney fees arising out of, directly or indirectly, any claim or personal injury or death associated with such unintended or unauthorized use, even if such claim alleges
that MEN was negligent regarding the design or manufacture of the part.
In no case is MEN liable for the correct function of the technical installation where MEN products are a part of.
Copyright © 2013 MEN Mikro Elektronik GmbH. All rights reserved.
BC50I Data Sheet / 2013-02-06
Page 7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement