User Guide
0
IMPORTANT SAFETY INSTRUCTIONS:
Please read User Guide before using this product.
Please keep User Guide for future reference.
Please read the cautions to prevent possible danger and loss of property.
FEATURES:
Capacitive touch screen
170° Wide viewing angles;
High resolution: 1280×800;
Wide voltage: DC 7-24V;
High contrast: 800:1;
POP-UP shortcut menu.
CAUTIONS:
1. Please do not place the display screen towards the ground.
2. Please avoid heavy impact or drop onto the ground.
3. Please do NOT use chemical solutions to clean this product. Please wipe with a clean soft cloth to maintain the brightness of the surface.
4.
Please do not block any vent hole.
5. Please follow the instructions and trouble-shootings to adjust the product. Other improper adjustment may result in damage. Any further adjustment must be performed or conducted by a qualified technician.
6.
Please unplug the power and remove the battery if long-term no-use, or thunder weather.
Contents
1. PRODUCT DESCRIPTION ...................................................................................................... 2
3. INSTALLATION OF SUNSHADE AND BATTERY PLATE ................................................. 4
4. DV BATTERY MOUNT PLATE ............................................................................................... 5
5. WIRING INSTRUCTIONS........................................................................................................ 6
6. MENU SETTING ........................................................................................................................ 7
7. ACCESSORIES ......................................................................................................................... 13
8. PARAMETERS ......................................................................................................................... 14
9. TROUBLE SHOOTING .......................................................................................................... 14
YP-01140313
1
1. PRODUCT DESCRIPTION
1 ． Dial: turn up and down to adjust the value of menu option; press to confirm.
2 ． INPUT: circularly switch among of VIDEO, HDMI, VGA and SDI.
3 ． F1-F3: User-definable buttons.
Default function:
F1: Waveform F2: Vector F3 ： Level Meter
（ function customized to meet your needs ）
2
1. VGA interface.
2. Battery power on/off switch: “O” is power off; “|” is power on.
3. DC 12V power input.
4. DC/TALLY connector.
5. HDMI input interface.
6. HDMI output interface (Optional) .
7. Video output interface.
8. A / V input interface.
9. Earphone jack.
10. SDI output interface (Optional) .
11. SDI input interface (Optional) .
12. Speaker
13. Slide to left to connect power cable (connecting with the battery plate).
14. VESA Mounting interface
3
3. INSTALLATION OF SUNSHADE AND BATTERY PLATE
Installation of sunshade:
interlocking.
④
4
4. DV BATTERY MOUNT PLATE
Standard mounts process
Following three types of battery plates are suitable for this device, model
F970, QM91D, DU21 & LP-E6 (choose 2 out of 4).
MODEL: F-970 MODEL: QM91D MODEL: DU21 MODEL: LP-E6
DV Battery Mount Plate:
DV Battery Mount Plate Specification:
Model DU21 for battery of Panasonic DV:
NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with
Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.
Model QM91D for battery of SONY DV:
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV
116/DCR-DVD/PS105K/300K/10P/1E series.
Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,
HVR-V1C, FX7E F330.
Model LP-E6 for battery of Canon DSLR:
5D Mark II/5D Mark III/EOS7D/EOS60D;
5
Plate Bracket
V-mount battery plate (optional): Please refer to GP-L130AB type battery specifications.
V-mount Battery Plate
Plate Bracket
Anton Bauer mount battery plate (optional):
Please refer to GP-L130B type battery specifications.
Anton Bauer Mount Battery Plate
5. WIRING INSTRUCTIONS
Composite cable
White: audio L
Red: audio R
Yellow: video
A/V signal input
6
6. MENU SETTING
Before setting the functions, please make sure the device is connected correctly.
6-1. Touch Control Gesture
Swipe up to activate the shortcut menu.
Swipe down to hide the shortcut menu. (Unable to hide the shortcut menu without signal input.)
6-2. F1-F3 3 user-definable function buttons:
Long press any F1-F3 key for 3-5 seconds to pop-up shortcut menu directly. As shown in Figure (default menu button in blue font).
Slide up and down to select the desired option.
Finally, press the slider to confirm the selected item as default.
Functions of FN button can also be customized: Center
Marker, Screen Marker, Check Field, Color Bar, Aspect Ratio,
Camera, PIP, Zoom, Pixel-to-Pixel, Freeze Input, Underscan,
H/V Delay, Peaking, False Color, Exposure, Histogram, Level
Meter, Waveform, Vector.
FN: user-definable function button.
Default function:
F1: Waveform F2: Vector F3: Level Meter
7
6-3.
Dial Operation
Turn down the dial to activate Brightness adjustment.
Turn up and down to adjust the value directly.
Press the dial to activate options switch among of “Brightness, Contrast,
Saturation, Sharpness, Hue, Volume and Exit
”. (Option adjusted currently will be default option when user press the dial next time.)
6-4. MENU Operation
6-4-1 、 Shortcut Menu Bar
Swipe up on the display screen to activate shortcut menu, select the option needs to adjust on the menu bar. (Top menu bar: option values all shown on screen when click; Bottom menu bar: option values shown individually on screen when click.)
8
6-4-2. Clock” ”, enter the menu options
“ ” is return,” ” is exit.
ITEMS
Brightness
Contrast
Saturation
Hue
Sharpness
Back light
Volume
0 – 100
0 – 100
0 – 100
0
– 100
0
– 100
0
– 100
0 – 100
9
OPTIONS
ITEMS
Auto
Phase
Clock
H-Position
V-Position
Image Flip
Color Bar
④
OFF, ON
0 – 63
0 – 100
0
– 100
0 – 100
OFF, ON
OFF, ON
OPTIONS
Options under VGA mode.
ITEMS
Color Temp
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
0 ~ 255
0 ~ 255
0 ~ 255
0 ~ 511
0 ~ 511
0 ~ 511
OPTIONS
6500K/ 7300K/ 9300K/ User
Note:
Only available under “User” mode to meet the color value you need.
10
⑤ Marker
ITEMS
Center Marker
Marker Color
Marker Mat
Thickness
⑥
OPTIONS
OFF, ON
Red, Green, Blue, White, Black
0 – 7
1 – 8
ITEMS
PIP Mode
PIP Source
PIP position
PIP Swap
OPTIONS
Small, Medium, Large, PBP, POP
Video, VGA , HDMI and SDI (SDI is optional)
Upper Left, Upper Right, Lower Left, Lower Right
Signal adjust & switch under PBP and POP modes.
11
⑦
ITEMS
Language
LOGO
Camera
Peaking Color
Peaking Lever
Exposure Lever
Reset
Upgrade
English, Chinese
OPTIONS
ON, OFF
480P
(5DII Mode)
/ 1080I
(5DIII Mode)
Red, Green, Blue, White, Black
0 – 100
0 – 100
12
7. ACCESSORIES
Standard Accessories:
1. Sun Shade Cover 1 Piece
2. Gimbal bracket 1 Piece
3. HDMI A/C cable 1 Piece
4. Mini XLR & TALLY cable 1 Piece
5. 12V DC adapter 1 Piece
6. Shoe Mount (for camera only) 1 Piece
7. Audio output cable 1 Piece
8. Composite cable 1 Piece
9. VESA Adaptor Panel 1 Piece
10. Battery Plate
(F-970/QM91D/DU21/LP-E6)
2 Pieces (Choose 2 out of 4)
11. Adaptor Panel 1 Piece
12. Suitcase 1 piece
13. Manual 1 Copy
Optional Accessories
1. VESA folding bracket 1 Piece
2. VGA cable 1 Piece
3. V-mount Battery Plate 1Piece
4. Anton Bauer Mount Battery Plate 1Piece
5. Li-ion Battery 1Piece
13
8. PARAMETERS
Panel
10.1” LED Back light
Physical Resolution 1280×800
Brightness 350cd/ ㎡
Contrast
Viewing Angle
Input Voltage
800: 1
170°/ 170°(H/V)
DC 7-24V
Input Signal AV, HDMI, VGA and SDI (SDI is optional)
Power Consumption
≤ 10W
Operating Temperature -0 ℃ ~50 ℃
Storage Temperature -20 ℃ ~60 ℃
Dimension (LWD)
Weight
250×170×29.6mm
735g
9. TROUBLE SHOOTING
1. Only black-and-white display:
Check whether the color saturation is properly setup or not.
2. Power on but no pictures:
Check whether the cables of AV, VGA, HDMI and SDI are correctly connected or not. Please use the standard power adapter coming with the product package. Improper power input may cause damage.
3. Wrong or abnormal colors:
Check whether the cables are correctly and properly connected or not.
Broken or loose pins of the cables may cause a bad connection.
4. When on the picture shows size error:
Swipe up to activate menu, Click
“Underscan” to zoom in/out pictures automatically when receiving HDMI signals
5. Other problems:
Swipe up to activate menu, Click “ →Setting→ Reset ”
6. According to the ISP, the machine can not function properly:
ISP for program upgrades, non-professionals do not use. Please reboot your device if press accidentally!
· It is normal to see some bright lines appear on the screen when turn off the device.
Note: due to constant effort to improve products and product features, specifications may change without notice.
14
15
