IP Power 9255 Power Control User Manual

Below you will find brief information for Power Control 9255. The IP Power 9255 is an industrial-grade single-port relay that you can use to manage power through an Ethernet connection. It can easily integrate with other devices, allowing you to control power with your integrated system. The 9255's robust design and high-quality components make it suitable for a wide range of applications.

PDF Download
Document
IP Power 9255 User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Industrial single port relay design
  • Web browser access
  • Supports up to 8 Amp current
  • Power surge protection
  • High voltage and current safety standards
  • Network protocols: Http, DDNS, DHCP, Virtual and Dynamic IP
  • Smartphone and IOS supported
  • Embedded web server

Frequently asked questions

We recommend using the following email providers for the 9255: lavabit.com, inbox.com, gawab.com, gmx.com.

Please make sure to turn off any antivirus, firewall, and messaging software that may be blocking the device. Then re-open IP Edit and hit the rescan button.

1. In the login field enter the “super user”: do not enter the quotation marks and there is a space between super and user. 2. Then make sure to power off the device within 60 seconds, by unplugging the device and then plugging it back in. 3. Then login to the device with the default login and password - Default Login: admin, Default Password: 12345678

Hold the reset button for at least 5-7 seconds and you will hear two long beeping sound. Then use IP Edit to re-setup the device. Default IP: 192.168.1.100 (When no DHCP is apparent), Default Login: admin, Default Password: 12345678
Preparing document for printing…
0%