CYP DS-47A Video Wall Operation Manual
Below you will find brief information for Video Wall DS-47A. The DS-47A video wall is a high-performance display system that is perfect for a variety of applications. It features a 47-inch screen with a 1366*768 resolution and a 1400:1 contrast ratio. The DS-47A can be used to display a variety of content, including images, video, and text, and can be configured to display a single image or multiple images. The DS-47A also features a variety of input and output options, including HDMI, VGA, and SDI.
Advertisement
Advertisement
DS-47A
Video Wall
OPERATION MANUAL
Operation Instructions
Thank you for purchasing this product. For optimal performance and safety, read these instructions carefully. Please keep this manual for future reference.
Table of Contents
1. Specifications ...................................................................1
2. Remote Control ................................................................2
3. Signal Input / Output Terminals ........................................2
4. Using Your LED Display ...................................................3
5. Using the OSD menu........................................................4
6.3 Setup Menu ................................................................5
6. RS-232 Protocol ...............................................................6
6.1 Pin Definition ..............................................................6
6.2 Command ..................................................................6
7. Connection and Installation .............................................. 7
4
Important Information Warning
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrow-head within a triangle is intended to tell the use that parts inside the product are a risk of electric shock to persons.
The lightning flash with arrow-head within a triangle is intended to tell the use that parts inside the product are a risk of electric shock to persons.
Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set
(including on shelves above, etc.).
1. Mains Supply
Operate this product only from the type of power supply from the package. If you are not sure of the type of power supplied to your home, consult your local power company.
Disconnect the product from the mains before your start any maintenance or installation procedures.
2. Overloading
Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.
3. Liquids
The product should not be exposed to any liquids such as dripping or splashing. In addition, no objects filled with liquids, such as vases, should be placed on the apparatus.
4. Cleaning
Disconnect the product from the wall outlet before cleaning. Please wipe the screen gently with soft cloth. Do not using chemical solvents to cleaning the product, e.g. methylbenzene, resin or alcohol, will damage the exterior case, tinted glass and the remote controller. Do not apply them to clean this machine.
5. Place
Do not place the product on an unstable, fluctuating or tilt table stand. The dropped display may endanger the personnel safety or product functions.
6. Cable
Do not intertwine, pull or compress the power cable when placing the product, otherwise the power cable or plug may be worn out and damaged. And do not presses the power cable beneath the product, otherwise electric shocks, short circuits or flash over may occur.
WWW.CYPRESS.COM.TW
1. Specifications
Model. No
SPECIFICATION
Screen Size (inches)
Aspect Ratio
Contrast Ratio
Viewing angle range
Panel Resolution
Response Time (ms)
VIDEO
HDMI Compatibility
HDTV Compatibility
PC Resolotion
Progressive Scan
Video Noise Reduction
3D-Y/C Digital Comb Filter
Color Purity Optimizer
(3D Color Management)
Motion Pattern Noise Reduction
INPUT/OUTPUT
HDMI Interface
PC Input (for PC)
SDI
GENERAL
Power Supply
Power Consumption (W)
On Screen Display Languages
Dimension (H x V x D) mm
Package Dimension (H x V x D)mm
Net Weight (KG)
Gross Weight (KG)
Accessory
Power Cord
Remote Control with Batteries
User Manual
Warranty Card
CVWDS-47A
47”
16:9
1400:1
178°
1366*768
12
480p/720p/1080i/1080p
Up to 1080P
Up to 1920x1080@60
Yes
Yes
Yes
Yes
Yes
2 rear
1 rear
2 rear (1 in, 1 out)
100V~240V
150
Chinese, English
1046 x 591 x 115
1185 x 745 x 215
20.4
21
1
Yes
Yes
Yes
1
⑤
⑦
⑧
⑩
2. Remote Control
①
③
⑨
⑫
⑮
②
④
⑥
①
POWER: Turn on the power of the monitor.
②
POWER OFF: Turn off the power of the monitor.
③
SINGLE: Press this button to switch the output image to single display per monitor.
④
2x2/3x3/4x4/5x5:Press thess buttons to switch the output image to 2x2/3x3/4x/3x2/4x3 or 5x5 displays per image.
⑤
▲/▼: Adjust or select OSD menu up and down.
⑥
◄/►: Adjust or select OSD menu left and right.
⑦
⑧
RETURN: Exit the OSD menu or the selection.
⑨
MENU: Display the OSD (On Screen Display) menu.
⑩
HDMI1/2: Press this hot key to switch the input to HDMI I/2.
⑪
VGA: Press this hot key to switch the input to VGA.
⑫
U/OVER: Press this key to adjust the screen when the image is underscan or overscan.
⑬
SDI: Press this hot key to switch the input to SDI.
⑭
OPTION: Press this key to switch to the special setting of the display image set by the factory design.
⑮
FAC:Press this key to enter into the factory mode. This is not a normal entry therefore, do not press this key unless it is adviced and guide by the special technician.
2
3. Signal Input/Output Terminals
⑦
① ② ③ ④ ⑤ ⑥
① AC IN: Connect the power cord with the power adaptor included in the package and plug it into the wall outlet for the power supply.
② HDMI IN 1/2: Connect the HDMI cable from DVD/Blu-ray player for signal input.
③ VGA IN: Connect the D-Sub 15pin cable from the PC/NB device or with RGB to D-Sub adaptor from the AV device for video signal input.
④ RS-232 IN: Connect the D-Sub 9pin cable from PC/NB device for RS-232 control.
⑤ RS-232 OUT: Connect the D-Sub 9pin cable to the next video/TV wall panel's(suggest using the same family type) RS-232 IN for unit signal distribution and displaying.
⑥ IR in: Connect the IR blaster included in the package for receiving control's signal of the device.
remote
⑦ SDI OUT: Connect the SDI cable to the next video/TV wall panel's(suggest using the same family type) SDI IN for unit signal distribution and displaying.
⑧ SDI IN: Connect the SDI cable from the SDI source equipment for signal input.
⑧
4. Using Your LED Display
Refer to the owner's manual of any external equipment to be connected. When connecting any external equipment, do not connect any AC power cord to wall outlets until all other connections are completed.
1. Connect all AC power sources.
+
-
-
+
2. Installing the AAA size batteries in your remote control.
Step 1. Slide the back cover up to open the battery compartment of the remote control.
Step 2. Insert two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and (-) ends indicated in the battery compartment.
Step 3. Slide the cover back into place.
Do not use caustic cleaners (Porcelain, stainless steel, toilet, or oven cleaner etc.) on the remote, as it may suffer damage.
3. Press the [POWER] button on the remote to turn on the LED Display.
Monitor
7M
30°
3M
30°
3M
Monitor
3
5. Using the OSD menu
Press [MENU].
Press [▲ / ▼] to highlight an option.
Press [◄ / ►] to adjust.
5.1 Picture Menu
Press [▲ / ▼] to highlight an option.
Press [◄ / ►] to adjust.
Press [EXIT] to exit menu.
4
Option
Picture Mode
Standard
Colour
Tint
Sharpness
Contrast
Brightness
Description
To adjust picture mode to: Vivid / Normal / Cinema / User
ON/OFF, when slelct to ON the system will go back to initial setup
To adjust the color saturation.
To adjust picture hue (NTSC only).
Sharpen of soften the picture.
To increase or decrease picture contrast.
To adjust for brighten or darken the picture.
5.2 Setup Menu
Press [▲ / ▼] to highlight an option.
Press [◄ / ►] to adjust.
Press [EXIT] to exit menu.
Option
Language
Description
S e l e c t t h e O S D d i s p l a y l a n g u a g e ( E n g il s h , T r a d i it o n a l C h i n e s e a n d S i m p l fi y C h i n e s e ) .
Input Selection
Standard
Select the input from HDMI 1/2, VGA or SDI
Set it to ON will allow system to set the setup menu into the default value as indicated in the in the above diagram.
H POSITION START To set the total value of the horizontal value of the video/TV wall. This function is made to adjust for the standard monitor screen.
V POSITON START To set the total value of the vertical value of the video/TV wall. This function is made to adjust for the wide monitor screen.
H ZOOM SIZE
V ZOOM SIZE
To set the total value of the horizontal zoom in and zoo out size of the video/TV wall.
This function is made to enlarge the image or to shrink the image.
To set the total value of the vertical zoom in and zoo out size of the video/TV wall.
This function is made to enlarge the image or to shrink the image.
H BLANKING EDIT This function is to set the total value of the horizontal value of the banking area of the video/TV wall. This function is made to adjust the image according to display's frame.
V BLANKING EDIT This function is to set the total value of the vertical value of the banking area of the video/TV wall. This function is made to adjust the image according to display's frame.
5
6
6. RS-232 Protocol
RS-232 IN
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
NC
TxD
RxD
NC
GND
NC
Pin 7
Pin 8
Pin 9 NC
Baud Rate: 19200bps
Data bit: 8 bits
Parity: None
Stop Bit: 1 bit
Flow Control: None
RS-232 OUT
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
NC
RxD
TxD
NC
GND
NC
Pin 7
Pin 8
Pin 9 NC
6.2 Command
COMMAND
0x23 0x53 0x30 0x30 0x31 0x23
0x23 0x53 0x30 0x30 0x30 0x23
0x23 0x43 0x30 0x30 0x30 0x23
0x23 0x43 0x30 0x30 0x31 0x23
POWER ON
POWER OFF
UNDER SCAN
OVER SCAN
0xEF 0x06 0xD2 0xC0 0x20 0x00 0x04 0xEE
0xEF 0x06 0xD3 0xC0 0x20 0x01 0x04 0xEE
SINGLE
2x2
0xEF 0x06 0xD8 0xC0 0x20 0x01 0x09 0xEE 3x3
0xEF 0x06 0xDF 0xC0 0x20 0x01 0x10 0xEE 4x4
0xEF 0x06 0xDF 0xC0 0x20 0x01 0x19 0xEE 5x5
0xEF 0x06 0xD7 0xC0 0x20 0x01 0x08 0xEE 3x2
0xEF 0x06 0xE0 0xC0 0x20 0x01 0x11 0xEE
0xEF 0x05 0xD7 0xC0 0x22 0x07 0xEE
4x3
Change to HDMI
0xEF 0x05 0xD0 0xC0 0x22 0x00 0xEE Change to PC
0xEF 0x06 0x8A 0xC0 0x20 0x01 0xBB 0xEE Option
ACTION
7. Connection and Installation
①
④
FULL
②
③
2
①
④
SINGLE
②
③
SDI OUT
SDI IN
3
HDMI 1
HDMI 2
HDMI
SDI OUT
SDI IN
HDMI 1
HDMI 2
HDMI
1
4
HDMI 1
HDMI 2
HDMI
HDMI 1
HDMI 2
HDMI
PS3
CHDMI-4M
SDI SECURITY CAMERA
SDI OUT
SDI IN
SDI OUT
SDI IN
IR
POWER POWER OFF
2X2
3X2
SINGLE
3X3 4X4
4x3 5x5
FULL
OK
RETURN MENU
HDMI1/2 VGA U/OVER
SDI OPTION FAC
CR-107
7
www.cypeurope.com

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- 47-inch screen
- 1366*768 resolution
- 1400:1 contrast ratio
- HDMI, VGA, and SDI input and output options
- Single image or multiple image display
- RS-232 control
- On-screen display menu