CSU-200809-SurFin Cat FINAL - Categories On CS Unitec, Inc.

CSU-200809-SurFin Cat FINAL - Categories On CS Unitec, Inc.
C S U N I T E C S U R FA C E F I N I S H I N G T O O L S , A B R A S I V E S & A C C E S S O R I E S
Surface Finishing Tools & Accessories
CS Unitec offers professional power tools and abrasive accessories for surface finishing on
STEEL, STAINLESS STEEL, ALUMINUM and other metals, as well as rigid plastics and wood.
Innovation is the engine of efficiency!™
Innovations in machine design, abrasive materials and production methods have led the way to:
Hollow-core abrasives
for linear grinding
The PTX Eco Smart is a surface finishing
machine with a finned shaft for quick
abrasive changing – simply slide on the
abrasives and they secure automatically.
This saves time and the abrasive wheels
cost less. (Patented!)
5/8”-11 SPEED NUT changeover
The EASY-LOCK SPEED NUT allows
you to change flap discs in seconds,
without tools. It is easily hand
tightened and eliminates the need
for wrenches or expensive hubs.
Belts with buttonhole fastening system
for grinding and polishing closed
pipe constructions. (Patented!)
(Patented!)
Important advancements in flap disc technology
• PLANTEX ® high-tech hemp fiber compound (Patented!)
• TRIMTEX ® for grinding inside corners; shown at left (Patented!)
• POLY-MAGIC-WHEEL for dry polishing inside corners
• MAGNUM ® FLEECE TOP for surface conditioning, fine finishing
and polishing
Safer and more efficient!
CS Unitec is the source for flap discs and abrasives that are
free of fiberglass, mineral fibers and epoxy resin. They offer
superior material removal, longer service life and smoother
ergonomic handling.
Better for the environment!
Hemp fiber is an almost ideal base material
for backing plates of flap discs... and it is a
renewable resource!
The fiber in the high-tech PLANTEX®/TRIMTEX® compound is derived from the hemp plant – a sustainable raw
material which counteracts greenhouse emissions as it grows. The PTX hollow-core abrasives not only improve
production efficiencies, but also minimize pollution from production to waste disposal... no plastic insert!
Better for your bottom line!
In addition to their time-saving features and high quality, flap discs and abrasives from CS Unitec can save you
money – their cost of production is lower, their quality is among the best and they offer superior service life.
Hollow-core abrasive wheels from CS Unitec are more affordable than traditional solid-core abrasives since they
can be produced from less raw material. These new hollow-core abrasive wheels can also be used on traditional
finishing machines with the aid of a simple core adapter (see page 6).
View product demonstrations at www.csunitec.com.
2
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Surface Finishing Tools and Abrasives Index:
p. 4-11
PTX Eco Smart – electric
p. 4-5
LP 1503 AIR – pneumatic
p. 6
Brushes, Grinding Wheels, Belts, Abrasives, etc.
p. 6-11
Speed-controlled Angle Grinders
p. 12-13
VARILEX Speed-controlled Angle Grinder – 4” to 7” diameter
p. 12-13
Flap Discs
p. 14-27
PLANTEX ® – for grinding steel and stainless steel
p. 16-18
PLANTEX ® COOL TOP – for grinding stainless steel
p. 18
TRIMTEX ® – for grinding weld seams and in corners
p. 19
POLY-MAGIC-WHEEL – for dry polishing in corners
p. 20
TIGER SHARK-PLANTEX ® – for grinding aluminum
p. 21
MAGNUM ® FLEECE – for conditioning, finishing and polishing
p. 22
MAGNUM ® CLEAN – for pore-deep cleaning of metals
p. 23
FIX HOOK & LOOP SYSTEM – elastic backing disc for finishing
p. 24-25
EP Diamond Discs – for grinding fiberglass and hard plastics
p. 26
EB Diamond Grinding Discs – for reduced sparking when grinding steel
p. 27
®
PTX ECO SMART
PLANTEX®
PRODUCT INDEX
Surface Finishers
POLY-MAGIC-WHEEL
FIX HOOK & LOOP
Pipe Sanders
p. 28-30
LBR 1506 – weld seam grinder and pipe sander; electric or pneumatic
p. 28
BOA LRP 1503 – for polishing handrails, pipe and tubing; electric or pneumatic p. 29
LBS 1105 VE – finger belt sander for angles, corners, pipes and curves
p. 30
More Angle Grinders, Sanders and Polishers
p. 31-35
L 1509 AIR Pneumatic Angle Grinder – 1 HP, 4-1/2” to 5” dia.
p. 31
Dust Extraction Angle Grinders/Sanders – electric and pneumatic
p. 32
Variable-speed Grinders, Sanders and Polishers
p. 33-35
Deburring, Beveling and Faceting Machines
p. 35-39
Sheet Metal Deburring, Beveling and Faceting Machines
p. 35-38
Portable Beveling Machines
p. 39
BOA PIPE SANDER
ANGLE GRINDERS WITH
DUST EXTRACTION
DEBURRING/BEVELING
Safety Guidelines
Use all products according to the safety regulations of OSHA and directives by ANSI (American National Safety Institute) B7.1,
European DIN EN 13743 and all other applicable international safety standards.
Warranty
Products of CS Unitec, Inc. are warranted to be free from defects in material and workmanship for one year from date of purchase.
This warranty does not apply to normal wear or products which have been abused, misused, modified or repaired by someone other
than CS Unitec, Inc. or its Authorized Service Representatives.
If a product proves defective in material or workmanship within one year after purchase, return it to CS Unitec, Inc. or an Authorized
Service Center, transportation prepaid. CS Unitec, Inc. will, at its option, repair or replace defective products free of charge.
CS Unitec, Inc.’s sole liability and your exclusive remedy under this warranty is limited to repair or replacement of the defective
product. There are no other warranties expressed or implied and CS Unitec, Inc. shall not be liable for incidental, consequential or
special damages, or expenses excepting only the cost or expense of repair or replacement as described above.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
3
PTX
ECO SMART
The professional
surface finisher for
hard, continuous use.
A revolution in linear grinding!
Simply slide on the abrasives
and they secure themselves
automatically when the
machine turns. Fast and easy!
SUBSTANTIAL
COST SAVINGS
ON ABRASIVES
Press the spindle lock and simply slide on
the abrasive wheels or brushes, turning
in the correct direction onto the finned
shaft. They will be secured automatically.
Even narrow abrasive wheels can
be used on the PTX Eco Smart and
positioned freely on the finned shaft
(no spacer rings required).
Grinding in corners is easy –
simply slide the abrasive
wheel on the finned shaft a little
towards the outside.
Ergonomic design with anti-vibration handle
for comfortable, fatigue-free operation
Grind closed pipe constructions
using patented fleece belt with
the buttonhole system.
Variable-speed
dial adjustment
during operation
PATENT
PENDING!
Ergonomically
positioned
lockable
ON/OFF switch
Satin finishing using interleaf
fleece wheel.
* Note: Shaft
supplied with
keyway and
finned shaft
adapter.
4
Service cover
for fast
carbon brush
replacement
QUICK-LOCK cord for fast,
easy attachment and
replacement – for example, if
the power cord is damaged
Finned
shaft*
(see accessories in our price list)
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
www.csunitec.com
New abrasive mounting system saves time,
reduces cost and eliminates vibration.
PTX Eco Smart is a multi-functional grinding and polishing
system for flat surfaces and open or closed pipe
constructions. It grinds from coarse to very fine finishes and
burnishes to a high-gloss finish. It enhances stainless steel,
steel and nonferrous metals including aluminum, brass,
bronze and copper, as well as wood and rigid plastic.
Balanced straight-line handling, high torque and electronic
speed control enable the PTX to easily produce matte, satin
and other decorative surfaces up to a mirror finish. Besides
fine finishing, the PTX is ideal for coarse grinding to remove
welds, deep scratches, oxidation, rust and paint.
PTX Eco Smart features a newly developed abrasive
mounting system. This unique system allows grinding and
polishing wheels to be changed in seconds, without tools
or hardware. Simply slide the wheels and accessories onto
the finned, rigid rubber shaft. They secure themselves
automatically when the machine turns.
Slide-on grinding belt roller (Part Number 47006) is ideal for
open and closed pipe constructions.
PTX Eco Smart Case Set
(below, Part Number 47003a)
and PTX Eco Smart Professional
Kit (inset right, Part Number
47004a) are available.
LINEAR GRINDING SYSTEM
Perfect finishes on
large surfaces, with
no shadows or streaks
The finned shaft design ensures absolutely no vibrations
during operation and 100% concentricity. The main savings
compared to other linear grinders comes from the cost of
abrasives. The elimination of an internal core means the
abrasives wheels can be produced less expensively, while
delivering the same high-quality results.
CS Unitec can provide you with an extensive range of
abrasive tools (patent pending) and accessories to cover
almost every conceivable surface finishing application.
PTX Eco Smart Specifications
Power
12.27 Amp (1350 Watts)
110 Volt / 60 Hz
(Also available: 230 Volt / 50 Hz)
Variable speed
Speed control dial
Wheel width
Wheel diameter
Weight
Variable speed control from 950 to
3700 RPM with tachogenerator for
constant speed, even under load
With fine adjustment for using abrasives
at optimum efficiency
up to 4” (or 6” wide abrasives)
up to 4-1/2”
7.25 lbs. (3.3 Kg)
NOTE: We do continue to carry abrasives with core
insert adapters for older LP 1503 VR model grinders
and other machines. See our Price List for details.
•
1-800-700-5919
A wide selection of hollow-core abrasives is available for the
PTX Eco Smart. The lack of a core insert means that the
abrasives are lighter, easier to use and less expensive.
•
Visit our Web site at www.csunitec.com
5
Pneumatic Surface Finisher
P N E U M AT I C S U R FA C E F I N I S H E R / A C C E S S O R I E S / S P E C I A L B R U S H E S
Save time sanding and polishing. 4” wide face is ideal for
finishing stainless steel, metals, wood and synthetics.
The powerful LP 1503 AIR grinding and polishing machine
produces a uniform finish fast and easy without leaving visible
transitions and shadows. It is compact, lightweight and heavy duty.
Ideal for graining, polishing, brushing, blending, deburring,
cleaning welds, roughing and more. Easily achieve a #3, #4 or #8
finish. A wide speed range, high torque and a comprehensive line
of accessories make this an essential tool for continuous-duty
surface finishing.
Pneumatic LP 1503 AIR Specifications
Load speed
Motor
Air consumption
Weight
Standard Equipment*
2500 RPM
4” Interleaf wheel – P/N 47312*
1 HP (1/2” Air Connection)
Finned shaft – P/N 42004*
1 HP air motor at 90 PSI
20 CFM @ 90 PSI
* Standard equipment for both PTX Eco Smart and LP 1503 AIR surface finishers.
8 lbs.
Accessories
PTX Professional
Case (empty)
Strong, impact-resistant
design with rigid foam
internal compartments.
Hollow-core Shaft Adapter
Allows user to utilize more economical
hollow-core abrasives on traditional
surface finishers. Fits 3/4” dia. x
4” long shaft and 1/4” keyway(s).
Lockable Case
Part Number: 80002
Part Number: 42004
Special Brushes for Metals, Wood and Hard Plastics
PTX Stranded Wire Wheels
Sturdy steel wire brush. For
deburring, rust removal, roughing
and cleaning metal. For brushing
out soft annual rings on timber,
leaving a rough rustic effect.
PTX Bristle Wheel
Elastic nylon brush impregnated
with abrasive grit. For roughing and
deburring metal, as well as creating
a rustic effect with even annual ring
transitions on timber.
4” dia. x 2-7/8” wide – Part Number: 47701
4” dia. x 2-7/8” wide – Part Number: 47711
4” dia. x 1” wide – Part Number: 47702
4” dia. x 1” wide – Part Number: 47712
PTX Stainless Steel Wire Wheels
Elastic stainless steel wire brush. For
cleaning welds, deburring, removing
rust, roughing and removing coatings.
4” dia. x 2-7/8” wide – Part Number: 47721
Stranded wire wheel for creating a rustic effect on wood
4” dia. x 1” wide – Part Number: 47722
PTX Fiber Wheel
Elastic fiber brush. For polishing stained
wood, satin finishing, pore-deep dust
removal and cleaning applications.
4” dia. x 4” wide – Part Number: 47731
6
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
PTX Grinding Wheels for Coarse and Fine Finishing
PTX FLEECE (Nonwoven) Wheels
PTX FLEECE (Nonwoven) Wheel
Elastic nylon fleece impregnated with abrasives for a
first-class finish. Produces shadow-free matte, satin and
polished finishes. For removing oxidation on stainless
steel and nonferrous metals and also suitable for
smoothing wooden surfaces. Very high fleece
content by fleece compression.
Part No.
Diameter: 4”
Width: 2”, 4” or 6”
Grit: 60, 80, 180, 280, 400, 600, 900
PTX Interleaf (Combi) Wheel
Nylon fleece combined with abrasive flaps for matte
finishing, burnishing and removing light scratches,
oxidation and handling marks on stainless steel and all
metals. For removing old paint on wood while smoothing
at the same time.
Diameter: 4”
Width: 2”, 4” or 6”
Grit: 60, 80, 180
Grit
Size
47411
47412
47413
47414
47415
47416
47417
60 grit
80 grit
180 grit
280 grit
400 grit
600 grit
900 grit
4”
4”
4”
4”
4”
4”
4”
dia.
dia.
dia.
dia.
dia.
dia.
dia.
x
x
x
x
x
x
x
4”
4”
4”
4”
4”
4”
4”
wide
wide
wide
wide
wide
wide
wide
47401
47402
47403
47404
47405
47406
60 grit
80 grit
180 grit
280 grit
400 grit
600 grit
4”
4”
4”
4”
4”
4”
dia.
dia.
dia.
dia.
dia.
dia.
x
x
x
x
x
x
2”
2”
2”
2”
2”
2”
wide
wide
wide
wide
wide
wide
47422
47423
80 grit
180 grit
4” dia. x 6” extra wide
4” dia. x 6” extra wide
PTX Interleaf (Combi) Wheels
Part No.
PTX Flap Wheel
With radial abrasive cloth flaps in various grit sizes
for removing rust, oxidation layers, minor scratches
and for the regraining and burnishing of metals.
Diameter: 4”
Width: 2” or 4”
Grit: 24, 40, 50, 60, 80, 120, 180, 240
Grit
Size
47311
47312
47313
60 grit
80 grit
180 grit
4” dia. x 4” wide
4” dia. x 4” wide
4” dia. x 4” wide
47301
47302
47303
60 grit
80 grit
180 grit
4” dia. x 2” wide
4” dia. x 2” wide
4” dia. x 2” wide
47322
47323
80 grit
180 grit
4” dia. x 6” extra wide
4” dia. x 6” extra wide
LINEAR GRINDING SYSTEM WHEELS
PTX abrasives from CS Unitec are made according to high quality standards. A unique production process
guarantees high concentricity and thus vibration-free grinding – a prerequisite for fatigue-free working and
perfect surface finishes with no transitions or shadows. Simply try it! You will be surprised how much smoother
a PTX grinding wheel or brush wheel is.
PTX Flap Wheels
PTX CLEAN Wheel
Made of hard-textured, nonwoven fleece for cleaning and
descaling welds, pore-deep removal of rust, oxidation and
coatings, cleaning beams, bricks, etc. Produces an
effective linear finish on stainless steel. A new production
process guarantees 100% concentricity.
Diameter: 4”
Width: 2” or 4”
Grit: Medium
PTX GUM Wheel
Soft rubber impregnated with abrasive grit for the
removal of minor scratches. Ideal for a bright,
decorative linear finish on stainless steel and
nonferrous metals and for smoothing wooden fibers.
Diameter: 4”
Width: 2” or 4”
Grit: 60, 180
Part No.
Grit
Size
47211
47212
47213
47214
47215
47216
40
60
80
120
180
240
grit
grit
grit
grit
grit
grit
4”
4”
4”
4”
4”
4”
dia.
dia.
dia.
dia.
dia.
dia.
x
x
x
x
x
x
4”
4”
4”
4”
4”
4”
wide
wide
wide
wide
wide
wide
47201
47202
47203
47204
47205
47206
47207
47208
24
40
50
60
80
120
180
240
grit
grit
grit
grit
grit
grit
grit
grit
4”
4”
4”
4”
4”
4”
4”
4”
dia.
dia.
dia.
dia.
dia.
dia.
dia.
dia.
x
x
x
x
x
x
x
x
2”
2”
2”
2”
2”
2”
2”
2”
wide
wide
wide
wide
wide
wide
wide
wide
PTX CLEAN Wheels
Part No.
HOLLOW-CORE ABRASIVES HAVE MANY ADVANTAGES:
• Easy to mount – simply slide on and off
47511
47501
Grit
Medium (black)
Medium (black)
PTX GUM Wheels
• 100% concentricity – no vibration
Part No.
• Lower cost!
We continue to carry abrasives with core inserts.
See our Price List.
•
1-800-700-5919
Size
4” dia. x 4” wide
4” dia. x 2” wide
•
Grit
Size
47611
47612
60 grit
180 grit
4” dia. x 4” wide
4” dia. x 4” wide
47601
47602
60 grit
180 grit
4” dia. x 2” wide
4” dia. x 2” wide
Visit our Web site at www.csunitec.com
7
Expansion Roller
➔
L I N E A R G R I N D I N G S Y S T E M – E X PA N S I O N R O L L E R & B E LT S L E E V E S
Use with sanding belts, fleece and felt sleeves. The sleeves are simply pushed over the expansion roller and held securely
in place by the centrifugal force. 3-1/2” dia. x 4” wide – Part Number: 47005
TIPS & TRICKS
Expansion Roller – Hard Rubber
Internal expansion slots now allow easier sleeve
replacement and improved adjustment to the workpiece,
as well as vibration absorption and concentricity.
Part Number: 47005
Belt Sleeves for Expansion Roller
PTX Zirconium Grinding Belt Sleeves
PTX Zirconium Grinding Belt Sleeve
Made of zirconium. Removes deep
scratches and grinds weld seams on
metals. Far less rework is required as a
result of using the time-saving linear
grinding technique.
Part No.
42040
42060
42080
42120
42150
42180
3-1/2” dia. x 4” wide
Grit: 40, 60, 80, 120, 150, 180
Grit
40
60
80
120
150
180
Size (dia. x width)
grit
grit
grit
grit
grit
grit
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
x
x
x
x
x
x
Quantity
4”
4”
4”
4”
4”
4”
10
10
10
10
10
10
per
per
per
per
per
per
pack
pack
pack
pack
pack
pack
PTX “TZ” Pyramid Sleeves
PTX “TZ” Pyramid Sleeve
New abrasive cloth with pyramid-shaped
grit structure. Allows high material removal
while producing a very fine finish, reducing
the amount of work required when
compared to grinding belt sleeves and
fleece sleeves. Pyramid sleeves are ideal
for pre-polishing for fine mirror finishes and
for removing scratches and spot welds.
Even roller scale can be removed easily.
Part No.
42265
42245
42230
42216
42206
Grit
A65/320
A45/400
A30/600
A16/1200
A06/2000
Size (dia. x width)
grit
grit
grit
grit
grit
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
x
x
x
x
x
4”
4”
4”
4”
4”
Quantity
10
10
10
10
10
per
per
per
per
per
pack
pack
pack
pack
pack
“TZ” PYRAMID GRIT COMPARISON TABLE
3-1/2” dia. x 4” wide
Corresponds
to grit size
Grit: A65/320, A45/400, A30/600, A16/1200, A06/2000
A65
A45
A30
A16
A06
320
400
600
1200
2000
PTX Fleece “Nonwoven” Sleeves
PTX Fleece “Nonwoven” Sleeve
Nylon impregnated with abrasive grit for
removing minor to medium scratch marks
and oxidation coatings, matte and satin
finishing and deburring applications.
3-1/2” dia. x 4” wide
Grit: Coarse, Medium, Fine, Superfine
Part No.
Grit
42010
42011
42012
42009
coarse (brown)
medium (red)
fine (blue)
superfine (grey)
Size (dia. x width)
3-1/2”
3-1/2”
3-1/2”
3-1/2”
x
x
x
x
4”
4”
4”
4”
Quantity
5
5
5
5
per
per
per
per
pack
pack
pack
pack
FLEECE COMPARISON TABLE
Corresponds
to grit size
Coarse
(brown)
Medium
(red)
Fine
(blue)
Superfine
(grey)
80
180
280
400
The expansion roller is helpful when grinding large
areas and removing large welds.
➔
TIPS & TRICKS
To remove the grinding sleeve,
place the expansion roller on a round object
that is slightly smaller than the roller. Then push
the sleeve down slightly using both hands.
8
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Abrasives for Polishing to High-gloss and Mirror Finish
PTX SuperPolish Sleeve
Revolutionary special fleece produces perfect
brilliant, shadow-free mirror finishes on stainless
steel and nonferrous metal surfaces using polishing
compounds (white and blue) and pink polishing
cream. SuperPolish fleece is absorbent, does not
smear and saves significant work time. Must be
used with the expansion roller.
3-1/2” dia. x 4” wide
Part Number: 42013
3-1/2” dia. x 4” wide – Part Number: 42013N
Polishing and Maintenance Products
PTX Pre-grinding &
Polishing Compound
Essential for polishing all metals,
including stainless steel, aluminum, etc.
PTX Polishing Cream, Pink
For finishing. Produces a perfect mirror finish on
stainless steel and nonferrous metals when used
with the SuperPolish Sleeve.
PTX® WHITE pre-polishing compound (23 oz.)
Part Number: 40013
PTX® BLUE finishing compound (23 oz.)
Can, 2.2 lbs. – Part Number: 40015
Miniature tube, 2 oz. (approx.) – Part Number: 40015T
Part Number: 40014
Cardboard dispenser contains 23 oz. (approx.)
Microfiber Cloths
For pore-deep cleaning and even
distribution of maintenance products and
polishes. Our microfiber cloths produce a
top finish on all materials.
PTX Lime (noncaustic)
For removing cream and compound
residues. Scatter on the surface, and
wipe off with a microfiber cloth.
Can, 2.2 lbs. – Part Number: 40016
Aluminum scatter container – P/N: 4002A
Size: 13” x 14” – Part Number: 40030
Brilliance-Clean
For streak- and residue-free cleaning of all
surfaces, including stainless steel, steel, aluminum,
brass and copper. Brilliance-Clean is not harmful
to plastics, wood or coated surfaces. It removes
fingerprints, dust, compound residue, minor oil
and grease marks and adhesive residue
effortlessly. Evaporates quickly without leaving
any residue on the surface.
POLY Protection (oil film)
For cleaning and preserving finished and
polished stainless steel and nonferrous metal
surfaces. Protects against shadows and finger
and water marks for a long time. Spray on and
rub off with a microfiber cloth. Produces a
darker effect on finished surfaces. Also suitable
for food-grade and outdoor use.
Canister (including spray bottle), 1.3 gal. – P/N: 40012
Spray bottle, 17 oz. – Part Number: 40011
Canister (including spray bottle), 1.3 gal. – P/N: 40051
Spray bottle, 17 oz. – Part Number: 40050
INOX-Protect (hard sealant)
Protects finished and polished metal surfaces
(stainless steel, steel, aluminum, brass, copper,
etc.) with a clear, dry adhesive film. Removes
fingerprints and other dirt.
Canister (including spray bottle), 1.3 gal. – P/N: 40041
Spray bottle, 17 oz. – Part Number: 40040
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
LINEAR GRINDING SYSTEM – POLISHING & MAINTENANCE ACCESSORIES
PTX Felt Sleeve
Made of soft merino (endless) for
polishing large stainless steel and nonferrous
surfaces quickly to a mirror finish. Also
suitable for hard plastics. Must be used with
the expansion roller.
9
➔
TIPS & TRICKS
S U R FA C E F I N I S H I N G T I P S & T R I C K S
A perfect mirror finish on stainless steel and nonferrous metals.
The newly developed grinding and polishing system, featuring special “TZ” Pyramid and SuperPolish fabrics from CS Unitec, produces
a perfect mirror finish quickly and in just a few steps.
Step 1
Prepare with “TZ” Pyramid
sleeve A 45 (Gr 400) or A 65
(Gr 320) to remove roller scale,
scratches and minor
unevenness. Then rework with
“TZ” Pyramid A 30 (Gr 600)
and finish with A 16 (Gr 1200).
We recommend that you
prepare lower-quality stainless
steel (with minor imperfections,
etc.) or very hard material with
A 06 (Gr 2000).
1.
Tip:
When grinding with
“TZ” Pyramid
abrasives, you must
also move longitudinal
and diagonally to the
working direction to
ensure that the material
is removed evenly.
Important:
After each step, remove the
compound residue from the
workpiece with PTX Lime and a
microfiber cloth.
Step 3
Finally, use the yellow
SuperPolish sleeve together
with the finish polishing cream.
This time, only polish in a
single direction.
3.
The result...
a brilliant mirror finish!
Step 2
Use the yellow SuperPolish
sleeve for the main polishing
process in conjunction with
preparation and finishing
compound.
Tip:
With the pre-polishing compound you should also
work longitudinal and diagonally to the working
direction. This is not necessary for working with the
finish compound and polishing cream.
2.
Maintain
and protect
finished or
polished stainless
steel surfaces.
Compound and cream residues can be
removed using PTX Lime. Simply scatter on the
lime and wipe it off using a microfiber cloth.
Compound residues, fingerprints, dust, minor oil and grease
marks and adhesive residue can
be removed effortlessly with
Brilliance-Clean. Any residue will
evaporate immediately.
To protect finished or polished metal surfaces, spray
INOX-Protect on the surface, rub off with a microfiber
cloth, wipe the surface dry and then polish briefly. The
surface will be protected by a dry, invisible film for several
weeks. Polished finishes will not be darkened by this product.
10
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Abrasives for Pipe Constructions – Open or Closed
Diameter: 3.5” x 2.8” Part Number: 47006
PTX Grinding Belt in high-quality
aluminum oxide (closed)
For coarse and initial grinding, rust removal and
smoothing round metal pipes. For use with grinding
belt rollers. For use on closed pipe constructions,
see TIPS & TRICKS below. Dimensions: 1.2” x 24”
Grit: 40, 60, 80, 120, 150, 180, 240
See ordering information at right.
PTX “TZ” Pyramid Belt (closed)
New abrasive fabric with pyramid-shaped grit
structure for removing scratches, roller scale and
spot welds. “TZ” Pyramid belts allow high material
removal while producing a very fine finish. They are
ideal for the initial grinding before polishing to a
mirror finish. Because the grit fineness is increased
slowly, it is possible to omit several operations. For
use with grinding belt rollers. For use on closed pipe constructions, see TIPS &
TRICKS below. Dimensions: 1.2” x 24”; Grit: A65, A45, A30, A16, A06
PTX Grinding Belts (Aluminum Oxide)
Part No.
49040
49060
49080
49120
49150
49180
49240
Grit
40
60
80
120
150
180
240
Size (width x length)
grit
grit
grit
grit
grit
grit
grit
1.2”
1.2”
1.2”
1.2”
1.2”
1.2”
1.2”
x
x
x
x
x
x
x
Quantity
24”
24”
24”
24”
24”
24”
24”
10
10
10
10
10
10
10
per
per
per
per
per
per
per
pack
pack
pack
pack
pack
pack
pack
PTX “TZ” Pyramid Belts
Part No.
49365
49345
49330
49316
49306
Grit
A65/320
A45/400
A30/600
A16/1200
A06/2000
Size (width x length)
grit
grit
grit
grit
grit
1.2”
1.2”
1.2”
1.2”
1.2”
x
x
x
x
x
24”
24”
24”
24”
24”
Quantity
10
10
10
10
10
per
per
per
per
per
pack
pack
pack
pack
pack
PTX Fleece Nonwoven Belts (open)*
Part No.
49001
49002
49003
49007
Grit
coarse (brown)
medium (red)
fine (blue)
superfine (grey)
Size (width x length)
1.2”
1.2”
1.2”
1.2”
x
x
x
x
26”
26”
26”
26”
* Feature buttonhole fastening system
➔
See ordering information at right.
With buttonhole –
PATENTED!
PTX Fleece Nonwoven Belt (open)
Buttonhole fastening system for fine
grinding and pre-polishing on open and
closed pipe constructions and handrails.
The fleece belt can be opened and
closed as often as necessary. For use
with grinding belt rollers. International
patent and design protected.
PTX Special Adhesive Tape
Dimensions: 1.2” x 26”
Grit: coarse, medium, fine, superfine
See ordering information at right.
Dimensions: 1” x 165’ Part Number: 49000
With glass fabric insert for joining grinding
belts. Strong, heat-resistant adhesive force.
For joining PTX grinding and “TZ” Pyramid
belts for use on closed pipe constructions.
Affix the adhesive tape over the entire
length of the grinding belt, overlapping
approximately 370˚.
➔
PTX Felt Belt (open)
Made of merino felt with buttonhole
fastening system for polishing work on
open and closed pipe constructions and
handrails. The polishing belt can be
opened and closed as often as
necessary. For use with grinding belt
rollers and our polishing compounds and
creams. Use a separate felt belt for each compound and cream grit.
Do not use compounds with different grits on felt. International patent
and design protected.
Dimensions: 1.2” x 26”; Part Number: 49004
PTX SuperPolish Belt (closed)
For a perfect mirror finish on pipe
constructions and handrails. SuperPolish is
a new, special micro fleece that produces
a perfect, brilliant mirror finish on
stainless steel and nonferrous metals.
Smears and shadows are eliminated
when used with our polishing compounds (white and blue) and pink
cream. SuperPolish is absorbent and saves lots of work time. For use
with grinding belt rollers.
Dimensions: 1.2” x 26” (not available with buttonhole fastening system)
Part Number: 49004N
➔
TIPS & TRICKS
Grinding and polishing closed pipe constructions
Fleece and felt belts with the patented buttonhole fastening system are ideal for
working on closed pipe constructions and handrails. The grinding belt can be
placed over the pipe and closed or opened again in a twist using the
buttonhole system. Changing a belt is quick and easy. The belt can be
opened and closed as often as required.
LINEAR GRINDING SYSTEM – ABRASIVES FOR PIPE CONSTRUCTIONS
PTX Grinding Belt Roller with stainless steel flanges
For grinding, fleece, SuperPolish and felt belts. The belt
roller is made of wear-resistant soft Vulculan with stainless
steel discs on the sides. The surface is grooved to ensure
that the abrasive belt does not slip.
Closed belts such as the high-quality aluminum oxide belt or the “TZ”
Pyramid belt must be cut open to work on closed pipe constructions.
Place the belt over the pipe and join using our special adhesive
tape (P/N 49000) over the entire length (approx. 370˚).
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
11
VARILEX ®
WSF 1600
Professional
The most powerful
speed-controlled angle
grinder in its class.
Variable speed from 2000 to 7300 RPM, 12.27 Amp
(1350 W) power, disc change in seconds without tools.
For disc diameters of 4”, 4-1/2”, 5”, 6” and 7”.
VARILEX® is the ideal angle grinder for flap, grinding and
cutting discs and the Hook & Loop system.
The carbon brushes
are under the
service cover for
easy inspection and
quick changing
QUICK-LOCK cord for fast,
easy attachment and
replacement – for
example, if the power
cord is damaged
Long-life magnetic field
(see accessories in our price list)
Dust-tight
field coil
with special
coating to
protect
against
metal dust
SPEED NUT Changeover
Hand tighten discs in
seconds without tools
using the 5/8”-11
EASY-LOCK SPEED
NUT (Patented!)
Easy speed
control
during
operation
Very powerful and
infinitely adjustable
New ergonomic design
for comfortable,
fatigue-free
working
5/8”-11 UNC
spindle thread
12
•
1-800-700-5919
•
Much lower electromagnetic
interference for the user due to the
separation of the armature/field
package and handle in the design
Safety Notice: Always use the
protective wheel guard and
follow all applicable safety
instructions and regulations.
Visit our Web site at www.csunitec.com
The most powerful singlehanded angle grinder in its class
Kit sets for VARILEX® WSF 1600
Professional angle grinders
Sensitive variable-speed control makes the VARILEX® ideal
for use with both flap discs and grinding and cutting wheels.
This feature:
• Doubles the service life of a flap disc
• Prevents glazing of the disc and heat deformation on
the workpiece
• Drastically reduces the noise level
Basic Starter Kit in a case, includes: VARILEX® angle grinder,
PLANTEX® discs and TRIMTEX® discs. Part Number: 80053
The VARILEX® differs from a conventional angle grinder in
its ability to change discs in seconds, without tools, using
the patented EASY-LOCK clamping nut and spindle lock. It
also offers:
• Optimal speed setting for a range of grinding and polishing
tools, yielding perfect results every time
• A balanced handle that ensures fatigue-free grinding
VARILEX® WSF 1600 Professional Specifications
Order Number: 6500A
Power 12.27 Amp (1350 Watts)
110 Volt / 60 Hz
FIX Test Kit
FIX Hook & Loop backing disc with PUR foam, FIX fleece discs,
FIX SuperPolish discs, FIX TZ Pyramid disc, mini polishing
compounds and lime powder in a practical dispenser.
(Also available: 230 Volt / 50 Hz)
Variable speed Infinitely adjustable from 2000 to 7300 RPM
SPEED-CONTROLLED ANGLE GRINDERS
The VARILEX® boasts a powerful motor up to 12.27 Amp,
1350 W that has been designed and developed for heavy
industrial use. The speed is infinitely adjustable between
2000 and 7300 RPM. A tachogenerator keeps the speed
constant, even when the grinder is operating at full load.
Part Number: 80051u
Diameters 4” to 7”
Spindle thread 5/8”-11 UNC
The VARILEX® is not designed for continuous use at low
speed for polishing paint in the automotive trade.
Arbor size 7/8”
Weight 5.2 lbs.
➔
Use with various discs and safety guards
Available with safety guards (5”, 6” and 7”) for use with
various-size grinding discs from 4” to 7” diameter (typical
disc diameters are 4”, 4-1/2”, 5”, 6” and 7”).
5/8"-11 EASY-LOCK SPEED NUT Clamping System
(2) Main polish with SuperPolish disc
and white polishing compound, then with
blue polishing compound. Important: Use
a separate disc for each compound grit.
Easy hand tightening
eliminates the need for
wrenches and expensive
5/8"-11 hubs. See
page 31 for details.
1-800-700-5919
Polish stainless
steel to a mirror
finish with the
VARILEX® WSF 1600
Professional
(1) Initial grinding (remove
scratches and roller scale,
level welds) with TZ Pyramid
disc A45 (grit 400) or A65
(grit 320). Finish with TZ
Pyramid disc A30 (grit 600)
and A16 (grit 1200) (➔ page 25)
Using the EASY-LOCK
SPEED NUT, you can
change the abrasive
disc on an angle grinder
in a matter of seconds –
without tools!
•
TIPS & TRICKS
(3) Mirror finish with SuperPolish disc and
pink polishing cream (➔ page 9)
•
Visit our Web site at www.csunitec.com
13
FLAP DISCS
Longer, faster
and better grinding
Unbeatable technology and performance
The first flap discs for high-speed angle grinders were developed at the end
of the 1970s. More than 30 years of experience and unbeatable technology
go into the manufacture of every CS Unitec flap disc. In terms of material
removal capacity, service life and grinding quality, the flap discs that bear
the brands TRIMTEX® and TIGER SHARK-PLANTEX® – plus the newest
development, PLANTEX®, made of hemp fiber high-tech compound – are
among the best in the world.
Top of the class in material removal, service life and quality
The performance and service life of a flap disc are not only dependent on
the abrasive fabric used, but above all on the correct combination of elastic
backing material; grit mixtures on the flaps; the angle at which the flap is
held against the material; hard pressing; gluing system; and more. These
considerations are part of what sets CS Unitec apart from the rest – not all
flap discs are the same!
Good for the environment and better for your health
Great care is taken to select raw materials that are environmentally sound
and user friendly. Commonly used materials such as fiberglass, mineral
fibers and epoxy resins are avoided in favor of sustainable raw materials
such as hemp for the discs’ backing plates. A patented, revolutionary elastic
adhesive mounting system for the abrasive fabric flaps further contributes to
the safety, performance, service life and user friendliness of CS Unitec flap
discs. Our discs also considerably reduce vibration and noise while grinding.
Unique patented production process
Completely new production technologies have been developed to
manufacture our high-quality flap discs. The adhesion of the flaps to the
backing disc is achieved using a patented, revolutionary adhesive system. In
contrast to many rival products, the flaps of CS Unitec’s discs are pressed
on to the backing disc over their full area – throughout the entire hardening
process – to produce a solid, compact and vibration-stable abrasive. This
also gives added support to the grits and holds them firmly in their
mounting, considerably extending the service life of the grinding discs.
14
•
1-800-700-5919
•
Standard and endurance
tests ensure quality and
play an essential role in
progressive new
developments.
Speed test
Grinding discs are tested on a
centrifugal test machine to ensure
that they can withstand the sort
of speeds that are required for
grinding work. The test system
can test discs at speeds of up to
30,000 RPM.
Endurance grinding test
Endurance tests are conducted to
measure the material removal
and service life of flap discs.
New fabrics are tested to ensure
their suitability and their grinding
properties on various materials.
Compliant with American
and German standards set by
ANSI B7.1 and DIN 13743.
Visit our Web site at www.csunitec.com
➔
TIPS & TRICKS
CS Unitec Flap Disc
Standard Flap Disc
A clear difference
These pictures show the clear difference between
a CS Unitec flap disc with hard-pressed flaps (top)
and a standard flap disc with fiberglass backing
and unpressed flaps (bottom). The poorly pressed
disc tends to “chatter” during the grinding process,
generating vibrations and resulting in the grit pulling
away from the mounting prematurely. This results in
irregular grinding, poor grinding capacity, short
service life and potential flap tearing.
Recommended speeds for maximum flap disc
service life and economy:
Grinding & Polishing Discs
4” diameter:
4-1/2” diameter:
5” diameter:
6” diameter:
7” diameter:
PLANTEX®
Flap discs for grinding
steel and stainless steel,
with hemp/polypropylene
backing.
See page 16
–
–
–
–
–
11,000 RPM
9000 RPM
8000 RPM
7000 RPM
6000 RPM
MAGNUM® FLEECE
For surface conditioning, fine
finishing and polishing.
See page 22
MAGNUM® CLEAN
PLANTEX® COOL TOP
Provides additional cooling to improve
grinding performance and service life for
stainless steel. See page 18
TRIMTEX
9000
7000
6000
5000
4000
®
For pore-deep cleaning of
metals. See page 23
FIX HOOK & LOOP
SYSTEM
For weld seams and spots in
corners, flanges and on flat
surfaces. See page 19
Highly elastic backing disc for
outstanding finish quality.
See page 24
POLY-MAGIC-WHEEL
EP DIAMOND DISCS
Ideal for dry polishing in corners.
See page 20
For fiberglass and plastics.
See page 26
TIGER SHARK-PLANTEX®
REDUCED SPARKING
Specially designed for grinding aluminum.
See page 21
•
1-800-700-5919
GRINDING AND POLISHING DISCS
Check the speed
The right speed increases the service life of flap discs
by up to 100% – a major factor in ensuring a low-cost
workflow. Operating flap discs between 5000 and
8000 RPM sets the table for optimal grinding capacity and
service life. Powerful, speed-controlled angle grinders such
as the VARILEX® WSF 1600 Professional (see page 12) are
ideal for working with flap discs.
•
EB diamond wheels reduce
sparking. See page 27
Visit our Web site at www.csunitec.com
15
Steel/Stainless Steel/Aluminum
PLANTEX ®
High-tech Compound
A quantum leap in
flap disc technology
PLANTEX® offers important advances in
grinding performance, service life, protection
for the environment and personal safety.
The development of the new PLANTEX®
high-tech compound has resulted in the
production of the first flap discs in the world
with a backing plate made of natural hemp,
with polypropylene used to bind it. In
addition to excellent material abrasion and a
long service life, the discs offer maximum
operator safety, protection of natural resources
and environmental friendliness.
This new composite material (hemp and polypropylene)
minimizes pollution from production to waste disposal.
Even the polypropylene binding material combusts to
approximately 1% carbon when disposed of by thermal
methods, producing almost zero residue. Polypropylene
is physiologically safe and is used in automotive
engineering (interior) and medical technology for
common items such as syringes, cannulae and infusion
bottles. As a result of its fiber structure, the hemp fiber
offers excellent tearing strength values. The superior
strength values of this high-tech compound are achieved
through a patented new treatment (“impact method”) for
hemp fibers.
Hemp fiber high-tech compound is an almost ideal
base material for flap disc backing plates – it is elastic,
heat-absorbent (for low grinding temperatures), very easy
to trim, safe to use and easy to dispose of. The cavities
of the hemp fiber structure, in conjunction with
polypropylene, have a highly insulating, damping and
noise-reducing effect, thus enhancing the safety features
of the discs.
16
•
1-800-700-5919
•
Made
in Germany
PATENTED!
www.csunitec.com
Safer working conditions
– No fiberglass, no mineral fibers, no epoxy resin
– Easy to trim, safe to use, easy to dispose of
Earth friendly
– Minimizes pollution, from production to disposal
– Hemp plant counteracts greenhouse effect
Competitively priced
– Lower cost of production
– Superior service life; 100% utilization
Visit our Web site at www.csunitec.com
®
• Self-trimming and very easy to cut – the backing plate reduces
in size automatically during the grinding process.
• Adjusts better to the surface of the workpiece during grinding.
• Absorbs vibration and noise due to its high fiber content.
• Heat-absorbent high-tech compound (with hollow fiber
insulation) reduces the temperature during grinding.
Trimming with cutting tools produces soft, harmless chips that can be
disposed of as domestic waste (smell is similar to wood chips).
• High strength, yet lightweight.
• High shape stability while maintaining elasticity.
Grinding down to the
last fraction of an inch
• High-tech compound is resistant to most chemicals.
• Made of a sustainable raw material – protects valuable
natural resources.
The backing plate used on
PLANTEX® flap discs reduces in
diameter automatically during
grinding. It can also be trimmed
with cutting tools, a process that
is simple and straightforward. The
PLANTEX® flap disc can be used
down to the last flap of the
abrading fabric – and saves you
money in the process!
• The backing plate can be disposed of safely and easily
(polypropylene binding combusts to approx. 1% carbon).
• Hemp provides good energy and CO2 balance.
• Outstanding value: PLANTEX® costs no more than a mediumquality conventional flap disc.
The clever ones give way!
100%
Service
Life!
Use down to the last abrasive flap by automatic trimming during
grinding or trimming using cutting tools on a sharp steel edge.
PLANTEX® Specifications
Diameter: 4”, 4-1/2”, 5”, 7”
Max. speed
13,300 RPM for 4-1/2” diameter
Ideal speed
5000 to 8000 RPM
Complies with
Grits
Arbor size
The fiber substrate of the PLANTEX® high-tech compound gives it
absorbent, spring-like properties that enhance grinding
performance. This elasticity provides a greater contact surface
area with the workpiece (more grit is used) that results in more
material being abraded. The material removal capacity is
therefore higher. The larger contact surface area also dissipates
more heat, making the grinding work cooler – the workpiece does
not suffer smearing and the abrasive fabric does not burn.
Grinding area with an
elastic backing plate
FLAP DISCS FOR STEEL / STAINLESS STEEL
• Superior material abrasion and service life due to the discs’
springy elasticity and 100% pure zirconium.
Dimensions
PLANTEX
PLANTEX® – features
to convince everybody!
The high-tech compound material used for the PLANTEX®
flap disc is perfectly safe. The backing plate is trimmed
automatically during the grinding process or can be
trimmed manually using cutting tools. The CO2 and
energy balance are also impressive. During its growth,
1 ton of hemp converts approximately 2 tons of carbon
dioxide into oxygen by means of photosynthesis. Hemp
therefore plays a beneficial role in counteracting the
greenhouse effect.
Grinding area with a
rigid backing plate
ANSI B7.1, 260 ft./sec. DIN EN 13743
40, 60, 80, 120
5/8” or 7/8”
Ordering information follows on page 18.
•
1-800-700-5919
elastic
•
backing plate
rigid
Visit our Web site at www.csunitec.com
17
PLANTEX
18
Flap disc with cool performance for
grinding stainless steel
The PLANTEX® high-tech compound is becoming
the standard flap disc for many companies. It is
fiberglass free and provides excellent performance
and service life. PLANTEX® also protects the
environment and precious resources.
The result:
The PLANTEX® COOL TOP ® high-tech compound has
been specifically developed for grinding stainless steel.
A new abrasive fabric with additional top-size coating
improves grinding performance and service life and also
provides additional cooling.
PLANTEX® COOL TOP® Specifications
Strength & safety with FEM
The backing plate for the PLANTEX®
high-tech compound is calculated
using the finite element method
(FEM). That ensures that it provides
the optimal strength and safety
properties, while minimizing material
use. Like all flap discs from CS Unitec, PLANTEX® flap
discs are approved for 260 ft./sec. to DIN EN 13743 and
have been approved by the MPA (Material Testing
Institute) in Hanover and by the BGIA (Professional
Association Institute for Industrial Safety). PLANTEX®
additionally complies with ANSI standard B7.1.
Dimensions
Diameter: 4”, 4-1/2”, 5”, 7”
Max. speed
13,300 RPM for 4-1/2” diameter
Ideal speed
5000 to 8000 RPM
Complies with
Grits
Arbor size
ANSI B7.1, 260 ft./sec. DIN EN 13743
40, 60 (for finer grits, use PLANTEX 80 and 120)
5/8” or 7/8”
Easy Disc Changeover - No Wrenches or Hubs Required!
Grinding discs can be changed in seconds,
without tools, using the 5/8"-11 EASY-LOCK
SPEED NUT. It is easily tightened by hand
and eliminates the need for wrenches or
expensive hubs. See page 31 for details.
PLANTEX® Disc Ordering Information
PLANTEX® Ordering Information
®
COOL TOP
®
GRINDING DISCS FOR STAINLESS STEEL
STAINLESS STEEL
PLANTEX® COOL TOP ®
PLANTEX® COOL TOP® Ordering Information
Part No.
Size (dia. x width x arbor)
Grit
Max. Speed
Quantity
Part No.
Size (dia. x width x arbor)
Grit
Max. Speed
Quantity
93514
93516
93518
93519
4”
4”
4”
4”
40
60
80
120
15,000
15,000
15,000
15,000
RPM
RPM
RPM
RPM
10
10
10
10
pack
pack
pack
pack
93614
93616
4” x 0.63” x 5/8”
4” x 0.63” x 5/8”
40
60
15,000 RPM
15,000 RPM
10 pack
10 pack
93624
93626
4-1/2” x 0.87” x 7/8”
4-1/2” x 0.87” x 7/8”
40
60
13,300 RPM
13,300 RPM
10 pack
10 pack
93524
93526
93528
93529
4-1/2”
4-1/2”
4-1/2”
4-1/2”
40
60
80
120
13,300
13,300
13,300
13,300
RPM
RPM
RPM
RPM
10
10
10
10
pack
pack
pack
pack
93634
93636
5” x 0.87” x 7/8”
5” x 0.87” x 7/8”
40
60
12,200 RPM
12,200 RPM
10 pack
10 pack
93534
93536
93538
93539
5”
5”
5”
5”
x
x
x
x
0.87”
0.87”
0.87”
0.87”
x
x
x
x
7/8”
7/8”
7/8
7/8”
40
60
80
120
12,200
12,200
12,200
12,200
RPM
RPM
RPM
RPM
10
10
10
10
pack
pack
pack
pack
93644
93646
7” x 0.87” x 7/8”
7” x 0.87” x 7/8”
40
60
8600 RPM
8600 RPM
10 pack
10 pack
93544
93546
93548
93549
7”
7”
7”
7”
x
x
x
x
0.87”
0.87”
0.87”
0.87”
x
x
x
x
7/8”
7/8”
7/8”
7/8”
40
60
80
120
8600
8600
8600
8600
10
10
10
10
pack
pack
pack
pack
•
1-800-700-5919
x
x
x
x
0.63”
0.63”
0.63”
0.63”
x
x
x
x
x
x
x
x
5/8”
5/8”
5/8”
5/8”
0.87”
0.87”
0.87”
0.87”
x
x
x
x
7/8”
7/8”
7/8”
7/8”
RPM
RPM
RPM
RPM
•
Visit our Web site at www.csunitec.com
TRIMTEX®
MULTIFUNCTIONAL
FLAP DISC
www.csunitec.com
TRIMTEX
The solution for grinding weld seams and
spot welds in corners. A self-trimming hemp
backing plate saves time and money.
®
Ideal for grinding in corners and on flanges, as well as on
flat surfaces. A large number of perpendicular grinding flaps
(approximately twice as many as on conventional flap discs) with
small gaps between them make it possible to combine different
operations, drastically cutting working time and tool costs.
FLAP DISCS – GREAT FOR GRINDING IN CORNERS
Benefits:
• Extremely high number of flaps provide very long service life.
• Ideal for smoothing welds in corners and on flanges (produces
clean, “soft” transitions for a perfect look).
• Multifunction discs – by increasing the contact pressure,
the flaps compress to form an aggressive package for
heavy-duty grinding and high material removal. By
decreasing pressure, the flaps fan out, making it perfect
for finish grinding and deburring.
• Hemp backing plate is trimmed automatically while grinding.
• Open construction creates a high cooling effect that drastically
reduces the grinding temperature on both the workpiece and
the grinding disc.
• The new active agent composition in the abrasive fabric further
reduces the surface temperature of the workpiece.
• 100% pure zirconium ensures perfect results on steel and
stainless steel.
• The flat design of the backing plate allows the user to reach
into awkward places.
• The spring-effect arrangement of the flaps actively prevents
grinding damage on the workpiece.
• Automatically adjusts to corner shapes.
Ideal for use on speed-controlled angle grinders.
TRIMTEX® Specifications
Dimensions
Diameter: 4-1/2”, 5”
Max. speed
12,000 RPM for 4-1/2” dia.
Ideal speed
6000 to 8000 RPM
Complies with
Grits
Arbor size
ANSI B7.1, 207 ft./sec.
40, 60, 80
7/8”
TRIMTEX® Ordering Information
Part No.
Size (dia. x arbor)
Grit
Max. Speed
Quantity
93704
93706
93708
4-1/2” x 7/8”
4-1/2” x 7/8”
4-1/2” x 7/8”
40
60
80
12,000 RPM
12,000 RPM
12,000 RPM
5 pack
5 pack
5 pack
93714
93716
93718
5” x 7/8”
5” x 7/8”
5” x 7/8”
40
60
80
11,000 RPM
11,000 RPM
11,000 RPM
5 pack
5 pack
5 pack
•
1-800-700-5919
Ideal for corners and grooves
(e.g. at shipyards)
Grind STEEL and
STAINLESS STEEL!
•
Visit our Web site at www.csunitec.com
19
Dry polish stainless steel in corners
up to a mirror finish!
The POLY-MAGIC-WHEEL is designed for finishing and dry
polishing in corners, producing up to a perfect mirror finish in
just two steps. These discs are made of highly compressed
fleece material and are made in a sophisticated production
process using compressed single flaps that are strengthened
by being impregnated with foam. This special process allows
considerably more abrasive material to be used than on
conventionally wound “unitized wheels and discs.”
The POLY-MAGIC-WHEEL is ideal for grinding and polishing
bead and corner welds. It may only be used frontally.
POLY-MAGIC-WHEEL Specifications
Dimensions
6-1/2” dia. x 1/2” material thickness
x 7/8” arbor
Max. speed
5000 RPM
Ideal speed
3000 to 4000 RPM
Grits
A/80, B/900
Ideal for speed-controlled angle grinders
Ideal for
polishing
in corners
POLY-MAGIC-WHEEL Ordering Information
Part No.
Grit
Usage
Qty.
96720 Grit A (80 grit) Initial grinding & leveling welds (red)
5 pk.
96721 Grit B (900 grit) Polishing to a perfect mirror finish (gray) 5 pk.
➔
MIRROR FINISHING AND CORNER POLISHING DISCS
POLY-MAGIC-WHEEL
TIPS & TRICKS
Polishing corner welds with the POLY-MAGIC-WHEEL
Obtaining good polish quality when finishing corner welds is difficult, especially for the
fabrication of railings. The POLY-MAGIC-WHEEL was designed to help you more easily
produce a truly perfect finish in these applications. This highly compacted fleece disc was
designed specifically for grinding and polishing bead and corner welds. The POLY-MAGICWHEEL disc can reduce the time required for this work to a minimum, and the result can
only be described as a minor miracle.
Mirror finish in 3 steps:
1.
Carry out the initial grinding and leveling of
welds with the red disc, grit A (80 grit). If
the weld is very coarse it is a good idea to
use the TRIMTEX® disc first.
Then polish to a mirror finish using
the POLY-MAGIC gray disc, grit B
(900 grit). These discs are very
aggressive; they save a lot of
working time and the result is
sensational. No polishing
compounds or creams are
required for polishing
with the POLY-MAGICWHEEL (dry polish).
TRIMTEX® for coarse welds
2.
POLY-MAGIC-WHEEL A (80 grit)
3.
POLY-MAGIC-WHEEL B (900 grit)
20
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
TIGER SHARK-PLANTEX®
Aluminum
& KANGAROO ALU-FIX OIL
TIGER SHARK-PLANTEX® elastic discs are unbeatable for the
difficult grinding of aluminum. High material removal, reduced
grinding temperature and no glazing with aluminum particles
make the TIGER SHARK® the first choice for these
applications. This flap disc, with its ceramic/corundum cotton
abrasive fabric, also offers high grinding capacity and low tool
costs for steel and nonferrous metals. The backing plate is
elastic PLANTEX® earth-friendly compound and adjusts well to
the shape of the workpiece. TIGER SHARK® is ideal for
grinding curved surfaces and shapes, and it is often used in
car body shops, car workshops and for tool making.
The excellent features of the TIGER SHARK® can be enhanced
even further with the newly developed Kangaroo ALU-FIX ®
OIL. A quick spray on the workpiece will solve many of the
problems you may have encountered while grinding aluminum
in the past. Glazing is no longer necessary, the material
removal rate is up to 300% higher, the finish is visibly better –
and the flap disc will last around three times longer.
TIGER SHARK-PLANTEX® Specifications
Dimensions
Diameter: 4”, 4-1/2”, 5”, 7”
Max. speed
13,300 RPM for 4-1/2” diameter
Ideal speed
5000 to 8000 RPM
Compliant with
Grits
Unique flap discs with a PLANTEX® elastic backing disc.
ANSI B7.1, 240 ft./sec. DIN EN 13743
FLAP DISCS FOR GRINDING ALUMINUM
The new dimension for grinding aluminum
40, 60, 80, 120
TIGER SHARK-PLANTEX® Ordering Information
Order No.
Size (dia. x arbor)
Grit
Max. Speed
Quantity
93814
93816
93818
93819
4”
4”
4”
4”
40
60
80
120
15,000
15,000
15,000
15,000
RPM
RPM
RPM
RPM
10
10
10
10
pack
pack
pack
pack
93824
93826
93828
93829
4-1/2”
4-1/2”
4-1/2”
4-1/2”
40
60
80
120
13,300
13,300
13,300
13,300
RPM
RPM
RPM
RPM
10
10
10
10
pack
pack
pack
pack
93834
93836
93838
93839
5”
5”
5”
5”
x
x
x
x
7/8”
7/8
7/8”
7/8
40
60
80
120
12,200
12,200
12,200
12,200
RPM
RPM
RPM
RPM
10
10
10
10
pack
pack
pack
pack
93844
93846
93848
93849
7”
7”
7”
7”
x
x
x
x
7/8”
7/8”
7/8
7/8
40
60
80
120
8600
8600
8600
8600
10
10
10
10
pack
pack
pack
pack
x
x
x
x
5/8”
5/8”
5/8”
5/8”
x
x
x
x
7/8”
7/8”
7/8
7/8”
RPM
RPM
RPM
RPM
Kangaroo ALU-FIX® OIL
Spray on aluminum workpiece to improve the
removal rate and increase abrasive life.
Available in a 1 pint spray bottle or a 1.3 gal.
canister with a spray bottle.
Part Numbers: 1-pint spray bottle – 40010
1.3 gal. canister and spray bottle – 40010k
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
21
MAGNUM® TOPMIX
FLEECE DISCS
Increased material removal,
longer service life
The MAGNUM® TOPMIX was developed to increase material
removal during finishing while also improving service life. The
80 combination grit is much more aggressive than our
MAGNUM® FLEECE TOP 80 grit (see below). Individual flaps
with foamed and compressed fleece offer a much higher
removal capacity, making it ideal for removing spot welds and
deep scratches on stainless steel, steel and nonferrous
metals. The coordinated fleece combination additionally
ensures that a good finish is achieved. The MAGNUM®
TOPMIX also offers excellent service life, making deburring
and cleaning of cast parts and welds a breeze.
MAGNUM® TOPMIX Specifications
MAGNUM® TOPMIX Ordering Information
Part No.
Size (dia. x thick x arbor)
Grit
Max. Speed
Qty.
96705
5” x 5/8” x 7/8”
80
6000 RPM
5 pk.
Dimensions
5” dia. x 5/8” fleece thickness x
7/8” arbor
Ideal speed
2000 to 4500 RPM
Max. speed
6000 RPM
Grit
80
Ideal for speed-controlled angle grinders
MAGNUM® FLEECE TOP
Made of foamed, compressed-grit,
interspersed nonwoven fleece
The MAGNUM® FLEECE TOP is a versatile fleece disc for
surface conditioning, fine finishing and polishing, offering up
to eight times the service life of traditional fleece and SC
discs. Its range of uses is impressive. The FLEECE TOP is
an ideal disc for metalworking that requires fine grinding and
pre-polishing to a uniform clean finish, and it is effective at
descaling and removing oxidation, scratches, rust, burrs and
paint. It replaces a wire brush, abrasive paper and grinding
rubbers and is self cleaning, with a special mixture that
prevents glazing and loading. The foamed fleece ring is
approx. 5/8” thick. This highly compressed quantity of fleece
material ensures an extra-long service life.
MAGNUM® FLEECE TOP Specifications
MAGNUM® FLEECE TOP Ordering Information
22
Part No.
Size (dia. x thick x arbor)
Grit
Max. Speed
Qty.
96710
96711
96712
96713
96714
96715
4-1/2” x 5/8” x 7/8”
4-1/2” x 5/8” x 7/8”
4-1/2” x 5/8” x 7/8”
4-1/2” x 5/8” x 7/8”
4-1/2” x 5/8” x 7/8”
4-1/2” x 5/8” x 7/8
80
180
280
400
600
900
8000 RPM
8000 RPM
8000 RPM
8000 RPM
8000 RPM
8000 RPM
5 pk.
5 pk.
5 pk.
5 pk.
5 pk.
5 pk.
•
1-800-700-5919
Dimensions
4-1/2” dia. x 5/8” fleece thickness x
7/8” arbor
Ideal speed
2000 to 4500 RPM
Max. speed
8000 RPM
Grits
80, 180, 280, 400, 600, 900
Ideal for speed-controlled angle grinders
•
Visit our Web site at www.csunitec.com
MAGNUM® CLEAN &
MAGNUM® CLEAN PLUS
CLEANING DISCS
For pore-deep cleaning of metals
(sand-blasting effect)
MAGNUM CLEAN® is an elastic cleaning disc for the poredeep cleaning of metals. This elastic coarse fleece disc is
interspersed with silicon carbide grit and cleans without
harming the base material. The disc itself is iron-free, which
means that there is no risk of corrosion. The coarse fleece
material will not glaze or load, even if exposed to heavy
contamination. MAGNUM CLEAN® is the ideal cleaning disc
for pore-deep removal of paint, rust, scale and oil smears, as
well as for cleaning and exposing without material removal. It
is ideal for use in body shops (cleans thin sheet metal with no
material removal) and in the automotive industry, and it is
also suitable for underseal, renovating, painting and building
work. MAGNUM CLEAN® is particularly good for removing
paint and other coatings on wood, stone and metal (including
window frames, doors and frames, furniture, house facades,
graffiti, railings, fences, supports and machines).
MAGNUM® CLEAN Specifications
Dimensions
5” dia. x 5/8” material thickness x
7/8” arbor
Ideal speed
2000 to 4500 RPM
Max. speed
5000 RPM
Grits
MAGNUM® CLEAN
Medium/standard (black), extra hard (red)
Ideal for speed-controlled angle grinders
Hardness: Standard (black)
MAGNUM® CLEAN (BLACK)
Elastic cleaning disc for removing color, rust,
oil stains and more
For pore-deep removal of paint, rust, scale and
dirt on metals (similar effect to sandblasting),
without removing the basic material. Perfect for
cleaning welds on stainless steel and wood, or
for removing paint and old material.
MAGNUM® CLEAN PLUS
Hardness: Extra-hard (red)
MAGNUM® CLEAN PLUS (RED)
Elastic cleaning disc for the hardest dirt
For pore-deep removal of paint, rust, scale and
dirt on metals (similar effect to sandblasting),
without removing the basic material. These
discs are complete without any metal, so there
is no danger of corrosion. Perfect for cleaning
welds on stainless steel.
MAGNUM® CLEAN Ordering Information
Part No.
Size (dia. x thick x arbor)
Grit
96700
5” x 5/8” x 7/8”
standard (black) 5000 RPM 10 pk.
Max. Speed
96701
5” x 5/8” x 7/8”
extra hard (red) 5000 RPM 10 pk.
•
Qty.
1-800-700-5919
Standard hardness for
rust and paint.
•
Extra-hard for stubborn dirt.
Visit our Web site at www.csunitec.com
23
F I X H O O K & L O O P S U R FA C E F I N I S H I N G & P O L I S H I N G S Y S T E M
PATENTED!
FIX HOOK &
LOOP SYSTEM
Highly elastic backing disc for
previously impossible finish quality;
ideal for surface conditioning and
polishing up to a mirror finish
The FIX Hook & Loop system takes advantage of a flexible
backing pad and allows a disc to be changed in seconds
without tools.
The FIX Hook & Loop system is a good fit wherever disc
flexibility and frequent changeover are important. It will save
time in industrial metalworking applications such as car
body shops and repair shops.
The system requires a speed-controlled angle grinder, such
as the VARILEX WSF 1600 Professional. A wide range of
abrasives are available for all steps leading from rough
grinding up to a mirror finish.
The FIX Hook & Loop system is an
essential surface finishing and polishing
system for all sheet metal applications.
The FIX Hook & Loop’s “green” backing disc is made of
natural materials. The flexibility of the abrasives allows you
to achieve results similar to stationary grinding machines.
The FIX family
of abrasives must
be used with the
FIX original
backing disc.
FIX Test Kit
FIX Hook & Loop backing disc with PUR foam, FIX
fleece discs, FIX SuperPolish discs, FIX TZ Pyramid
disc, mini polishing compounds and lime powder in
a practical dispenser. Part Number: 80051u
Special FIX Backing Disc with PUR Foam Absorption Coating
For use with the FIX Zirconium disc, FIX TZ Pyramid disc and FIX SuperPolish
disc. The backing disc is made of elastic PUR with a special 1/4” absorption
coating. Diameter: 4-1/2” with 5/8”-11 thread – Part Number: 80115u
FIX Zirconium Disc
Abrasive disc with Hook & Loop fastening and an
outstanding grinding capacity. Ideal for body shops
and car workshops.
Diameter: 4-1/2”; Grits: 40, 60, 80, 120
FIX Zirconium Disc Ordering Information
FIX starter kit in a case, includes: VARILEX® angle
grinder, FIX backing disc, FIX fleece discs, FIX
SuperPolish discs, FIX zirconium pad, mini polishing
compounds and lime in a practical dispenser.
Part No.
Diameter
Grit
Quantity
80904
80906
80908
80909
4-1/2”
4-1/2”
4-1/2”
4-1/2”
40
60
80
120
50
50
50
50
Part Number: 80050u
24
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
pack
pack
pack
pack
More Abrasives for the FIX Hook & Loop System
Diameter: 4-1/2”
Grits: coarse, medium, fine, superfine
FIX Fleece (Nonwoven) Disc Ordering Information
Diameter: 4-1/2”; Grits: A65, A45, A30, A16, A06 (see grit equivalents below)
FIX TZ Pyramid Disc Ordering Information
Part No.
Diameter
Grit
Quantity
80932
80940
80960
80970
80980
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
A65/320
A45/400
A30/600
A16/1200
A06/2000
10 pack
10 pack
10 pack
10 pack
10 pack
Part No.
Diameter
Grit
Quantity
80615
80616
80617
80618
4-1/2”
4-1/2”
4-1/2”
4-1/2”
coarse (brown)
medium (red)
fine (blue)
superfine (gray)
10 pack
10 pack
10 pack
10 pack
FIX SuperPolish Disc
SuperPolish is a new, special needle
fleece that produces a perfect,
brilliant mirror finish on stainless steel
and nonferrous metals. Used with our
polishing compounds (white and blue)
and pink cream to avoid smears and
shadows. SuperPolish is absorbent,
does not smear and saves lots of work time. A separate
SuperPolish disc must be used for each compound or cream so as
not to mix different compound grits.
FIX HOOK & LOOP ABRASIVES
FIX Fleece (Nonwoven) Disc
Versatile disc for fine surface
conditioning and pre-polishing.
FIX TZ Pyramid Disc
New abrasive fabric with pyramidshaped grit structure. Allows high
material removal while producing a
very fine finish. FIX TZ Pyramid discs
reduce the amount of work required
compared to grinding belt sleeves
and fleece sleeves and are ideal for
pre-polishing for later mirror finishes
and for removing scratches and spot
welds. An additional absorption coating drastically reduces the
grinding temperature and protects the Hook & Loop components
and the workpiece.
Diameter: 4-1/2”; Thickness: 1/4”
Part Number: 80715n (10 pack)
➔
TIPS & TRICKS
Perfect mirror finish on stainless steel and nonferrous metals
The new TZ Pyramid and SuperPolish discs for the FIX Hook & Loop system can be used with an angle grinder to create perfectly
polished finishes on stainless steel and non-ferrous metals.
Pre-grinding to remove scratches and level welds using TZ Pyramid discs with grit A30.
Fine grinding using TZ Pyramid discs with grit A16.
These two stages prepare the surface for polishing. TZ Pyramid is an aggressive abrasive, so there is no need to slowly increase the
grit fineness. Use only contact pressure to grind – the weight of the grinder is generally sufficient.
Pre-polish with SuperPolish disc and white polishing compound.
Main polish with SuperPolish disc and blue polishing compound.
Perfect mirror finish with SuperPolish disc and pink cream.
Use a separate SuperPolish disc
for each compound and cream –
the different compound grits must
not be mixed. Remove compound
and cream residues after each
stage using POLY-PTX® lime and a
microfiber cloth.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
25
ABRASIVES FOR FIBERGLASS & HARD PLASTICS
ABRASIVE DISCS
FOR FIBERGLASS
EP diamond discs are very aggressive and
perform well when sanding/grinding
fiberglass and hard plastics
Electro-plated (EP) diamond discs from CS Unitec are for
grinding and sanding fiberglass and hard plastics. Fast
working and long service life.
EP DIAMOND DISC Specifications
EP diamond
disc shown in
L1506 VV angle
grinder with
dust extraction
(see page 32).
Dimensions
Diameter: 4-1/2”
Max. speed
10,000 RPM
Ideal speed
2000 to 4000 RPM
Grits
Arbor size
30, 60, 100
5/8”-11 (7/8” optional)
EP DIAMOND DISC Ordering Information
Order No.
Size (dia. x arbor)
Grit
DKGF5811530
DKGF5811580
DKGF58115100
4-1/2” x 5/8”-11 30
4-1/2” x 5/8”-11 60
4-1/2” x 5/8”-11 100
Max. Speed
Qty.
10,000 RPM
10,000 RPM
10,000 RPM
1 disc
1 disc
1 disc
Note: Also available with 7/8” arbor.
Safety Notice: Follow all appropriate OSHA and international
safety regulations for grinding fiberglass and hard plastics.
Grinders / Angle Grinders / Sanders with Dust Extraction
CS Unitec offers a variety of electric and pneumatic grinders and sanders that
may be used in conjunction with our dust extraction vacuums. See page 32
for specifications on our L 1506 VV and VV AIR angle grinders / sanders
and our CS 1500 and CS 1225 vacuums. Contact us or
visit our Web site for more information
on the concrete grinders
shown below.
CS 1500
Dust Extraction
Vacuum
LD 1509 FR
5” Angle Grinder
L 1506 VV
Electric
(2200 to 6800 RPM)
(10,000 RPM)
Perfect for spot jobs
and edging on concrete
surfaces.
L 1506 VV AIR
Pneumatic
(6000 RPM)
EBS 125 Concrete Grinder
(10,000 RPM)
Perfect for concrete surface
preparation and smoothing.
26
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
REDUCED SPARKING
GRINDING DISCS
Eco Brazing (EB) diamond grinding discs from CS Unitec
reduce sparking to 1% of that produced by resinoid wheels,
making EB diamond a better choice than resinoid for use in
some hazardous environments.
• Diamond grit protrudes higher off the EB diamond disc
than traditional diamond wheels, providing greater durability,
longer service life and cutting freeness
• High-tensile steel backing disc reduces plate thickness for a
lightweight wheel that allows for high-rotation grinding
Benefits of reduced sparking:
• High yield strength makes the steel backing disc elastic,
helping to ensure that operators do not grind the material
by over-removal
• Workpiece visibility is improved,
allowing more accurate grinding
• Reduced sparking increases the visibility of the workpiece
• The EB diamond wheel wears approximately 1% as much as
a resinoid wheel, therefore significantly reducing the amount
of abrasive dust emitted
• Reduced fire hazard from sparks
• Ideal for grinding steel and stainless steel, as well as
natural stone, granite, marble, fiberglass and other materials
Resinoid Grinding
Disc at
10,000 RPM
EB DIAMOND DISC Specifications
Dimensions
Diameter: 4”, 7”
Max. speed
13,000 RPM (4”) or 8500 RPM (7”)
Ideal speed
6000 RPM (4”) or 3300 RPM (7”)
Grits
Arbor size
R E D U C E D S PA R K I N G G R I N D I N G D I S C S
Designed for grinding steel, stainless steel and
other materials in nuclear plants, oil and gas
industries and applications where spark
reduction is an important feature
EB Diamond
Disc at
10,000 RPM
30, 40, 50, 60, 80
7/8”
EB diamond grinding discs reduce sparking up to 1/100 of
that produced by resinoid grinding wheels (inset left).
EB DIAMOND DISC Ordering Information
Order No.
Size (dia. x arbor)
Grit
Max. Speed
Quantity
EB4007830
EB4007840
EB4007850
EB4007860
EB4007880
4”
4”
4”
4”
4”
x
x
x
x
x
7/8”
7/8”
7/8”
7/8”
7/8”
30
40
50
60
80
13,000
13,000
13,000
13,000
13,000
1
1
1
1
1
disc
disc
disc
disc
disc
EB7007830
EB7007840
EB7007850
EB7007860
EB7007880
7”
7”
7”
7”
7”
x
x
x
x
x
7/8”
7/8”
7/8”
7/8”
7/8”
30
40
50
60
80
8500
8500
8500
8500
8500
1
1
1
1
1
disc
disc
disc
disc
disc
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
Resinoid Grinding
Disc at
6000 RPM
EB Diamond
Disc at
6000 RPM
Though EB diamond discs have been shown to reduce sparking,
we make no claim that sparking will be eliminated. Follow all
appropriate safety regulations (ATEX, OSHA, ANSI) for all grinding
applications, including those for working in hazardous environments.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
27
WELD SEAM
GRINDER &
PIPE SANDER
Electric or Air
Removes welds and
polishes pipe
LBR 1506 with
grinding belt
The LBR 1506 is a combination grinder and pipe belt sander. The front hard
rubber contact roller drives the abrasive belt to grind flat surfaces. It removes
weld seams in a straight line, without leaving edges or a wavy finish.
For sanding pipes or handrails, it is a flexible tool. The sanding belt follows
every contour to grind and polish up to a high-gloss finish. The belt wraps
around the pipe and requires only a few steps to polish the entire
circumference. It is ideal for stainless steel, aluminum and highquality metals.
• For sanding pipes from 3/8” to 10” diameter
• Grinds weld seams on flat surfaces – leaves no edges
Electric
or Pneumatic
• Powerful 11 Amp motor and variable-speed control from
33 to 100 ft./sec.
• Quick and easy tool-free changing of sanding belts
LBR 1506 Accessories
• Ideal for stainless steel and aluminum
Abrasive Grinding Belt (10/pack)
For grinding and surface structuring –
Aluminum Zirconia
223.670
• 24” x 1-5/8”, 36 grit
• 24” x 1-5/8”, 60 grit
223.689
• 24” x 1-5/8”, 120 grit
266.132
• 24” x 1-5/8”, 240 grit
250.610
LBR 1506 Specifications
Electric
Pneumatic
(LBR 1506 VR)
(LBR 1506 AIR)
24-1/3” x 1-5/8”*
Belt size (L x W)
33 - 100 ft./sec.
Belt speed
Power 11 Amp/1200 Watts
Abrasive Polishing Belt (3/pack)
For polishing and cleaning –
Nonwoven abrasive
250.586
• 24” x 1-5/8”, Coarse
• 24” x 1-5/8”, Medium
250.587
• 24” x 1-5/8”, Fine
250.588
Pipe ø max. 10”
33 CFM @ 90 PSI
10”
Weight 11.25 lbs.
9 lbs.
* Note: Exact belt size is 618mm x 40mm
Standard Equipment
1 side handle – Part No. 252.721
1 spade-grip handle – 259.290
1 sanding belt set, grits
60/120/240 – 1 set
1 polishing fleece 1-5/8” x 24”
(medium) – 250.587
1 hex head wrench 5mm –
115.460
1 hex head wrench 6mm –
104.167
28
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
BOA
PIPE SANDER
Electric or Pneumatic
All-around polishing
solution for handrails,
pipe and tubing.
The LRP 1503 Boa Pipe Sander is the perfect solution for sanding and polishing
pipe constructions. The sanding arm snakes up to 270˚ around the radius of the
pipe. The operator simply rotates the BOA slightly to achieve a full 360˚ finish.
Spring resistance between the deflection rollers ensures that the sanding
arm and belt are always uniformly tensioned. The BOA saves time
finishing stainless steel and other ferrous and nonferrous pipe.
LRP 1503 VRA
with sanding belt
• Variable-speed control; 12 to 40 ft./sec. belt speed
• Maximum pipe Ø : 5” diameter
• Quick, tool-free replacement of sanding belt
• High-quality 270˚ sanding arm is made of light alloy with
two deflection rollers for quick progress, perfect finish and
simple operation
Electric
or Pneumatic
• Additional side handle can be rotated 180˚ in narrow spaces
Accessories
Electric LRP 1503 VRA
Power
Belt speed
Belt dimensions
Weight
Standard Equipment
11 Amp
1 carrying case with padding
12 - 40 ft./sec.
1 sanding belt, continuous, grit 80, 30” x 1-1/2”
30” x 1-1/2” or 3/4”*
1 sanding belt, continuous, grit 120, 30” x 3/4”
8.2 lbs.
1 sanding belt, continuous, grit 220, 30” x 3/4”
1 sanding fleece, continuous, fine, 30” x 1-1/2”
Pneumatic LRP 1503 AIR
Power
Belt speed
Air consumption
Weight
1 sanding fleece, continuous, medium,
30” x 1-1/2”
1 sanding-polishing belt, continuous, grit 600,
30” x 1-1/2”
1 HP
28 ft./sec.
20 CFM @ 90 PSI
8 lbs.
1 sanding-polishing belt, continuous, grit 1500,
30” x 1-1/2”
* Note: Exact belt size is 760mm x 40mm or 20mm
•
1-800-700-5919
•
Sanding belt, continuous (10/pkg.)
For polishing pipes and tubes
• 30” x 1-1/2”, grit 80 P/N 326.739
• 30” x 1-1/2”, grit 120
326.755
• 30” x 1-1/2”, grit 220
326.771
• 30” x 3/4”, grit 120
326.801
• 30” x 3/4”, grit 220
326.836
Sanding fleece, continuous
For polishing pipes and tubes
• 30” x 1-1/2”, fine
• 30” x 1-1/2”, medium
• 30” x 1-1/2”, coarse
(3/pkg.)
326.852
326.879
326.895
Sanding-polishing belt, continuous
For high-gloss polishing, without
polishing agents, in two steps
326.917
• 30” x 1-1/2”, grit 600
• 30” x 1-1/2”, grit 1500
326.933
Visit our Web site at www.csunitec.com
29
FINGER BELT SANDER Variable-speed
FINGER BELT SANDER
Ideal for angles and tight spaces, as well as pipes and
curves. The swivel-mounted arm, with 140˚ flexibility,
reaches into corners, grooves and folds.
The LBS 1105 VE finger belt sander saves time grinding in confined and
difficult areas. It uses belt sizes 3/16” to 1-1/8” wide by 21” long. The
sanding arm rotates up to 140˚ for reaching into corners, grooves and
folds, including pipes and curves.
The finger sander is ideal for grinding, blending, polishing and
deburring ferrous and nonferrous metal. It also works on
wood, plastic, fiberglass and other material. Speed is
adjustable from 13 to 39 ft./sec.
LBS 1105 VE with
3/8” sanding arm.
Interchangeable 1-1/8”
arm shown at right.
LBS 1105 VE Accessories
Sanding Belts (10/pack)
• 3/16”, 60 grit
• 3/16”, 120 grit
303.615
303.623
•
•
•
•
3/8”,
3/8”,
3/8”,
3/8”,
257.101
257.105
257.102
257.103
•
•
•
•
1-1/8”,
1-1/8”,
1-1/8”,
1-1/8”,
40 grit
60 grit
120 grit
220 grit
40 grit
60 grit
120 grit
220 grit
256.538
255.328
255.329
255.330
Narrow filing arm and 140˚
adjustability allow sanding
and grinding in confined
and difficult areas.
Sanding Fleece (3/pack)
318.663
• 3/8”, 240 grit
• 3/8”, 400 grit
318.671
• 1-1/8”, 240 grit
• 1-1/8”, 400 grit
318.647
318.655
LBS 1105 VE Specifications
Dry Sand/Polish Belts (1/pack)
318.132
• 1-1/8”, 600 grit
• 1-1/8”, 1500 grit
318.140
Belt speeds
13 to 39 ft./sec.
Motor
6.1 AMP
Weight
5.5 lbs.
Standard Equipment
(1) 3/8” sanding arm (pointed) –
Part No. 256.525
(1) sanding belt kit, grits
40/120/220 – 1 set
(1) side handle – 194.034
Optional Equipment
(1) hexagon socket screw key –
115.460
(1) 3/8” sanding arm (curved) –
Part No. 256.532
(1) 1-1/8” sanding arm (small roller) –
Part No. 255.282
Standard equipment includes
a metal carrying case.
(1) 1-1/8” sanding arm (large roller) –
Part No. 258.888
30
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
➔
TIPS & TRICKS
EASY-LOCK SPEED NUT SAVES TIME, WEIGHT AND MONEY!
The secret behind it – the self-clamping EASY-LOCK SPEED NUT
P/N 65008-1 (5/8”-11 UNC)
The EASY-LOCK SPEED NUT allows abrasive discs
to be changed in seconds without tools. The SPEED
NUT works with any abrasive with a hemp or ABS
backing plate and a 7/8” arbor. That means you can
change abrasives on an angle grinder in a matter of
seconds. It easily hand tightens and eliminates the
need for wrenches or heavy, expensive 5/8”-11 hubs.
The clamping collar shape on
the top of the EASY-LOCK
SPEED NUT can secure flap
discs and abrasives with a “thicker” backing disc as
well as centering them. “Thin” abrasives such as cutting
discs, etc. can simply be secured using the reverse of
the EASY-LOCK SPEED NUT clamping nut.
1. Secure the disc loosely by
hand using the SPEED NUT.
2. Press the spindle lock and tighten
the disc by turning it clockwise
by hand. That’s all there is to it!
2.
1.
3. To release the disc, press the
spindle lock and turn the disc
counter-clockwise by hand.
3.
PNEUMATIC ANGLE GRINDER
Never has changing a grinding disc been so quick and efficient
Angle Grinders, Sanders & Polishers
Electric and pneumatic
CS Unitec offers a variety of angle grinders, sanders and polishers to satisfy your most demanding needs. High
torque output, variable speed and powerful motors make them ideal for use in metal fabrication, construction,
shipyards, refineries, power plants and other heavy industries. Integrated dust extraction guard and vacuum systems
are available for some models.
Pneumatic Angle Grinder,
4-1/2” and 5”
1 HP mini grinder with 5/8” spindle
The L 1509 AIR is a powerful, lightweight pneumatic angle grinder
for grinding, cleaning, deburring, blending and smoothing. This
lightweight, versatile angle grinder is ideal for use in the most
demanding grinding and sanding applications.
L 1509 AIR
(6500 RPM)
L 1509 AIR Specifications
Power
1 HP
Speed
6500 RPM
Max. diameter
Air consumption
Air connection
Weight
• Heavy-duty pneumatic motor (1 HP / 6500 RPM) stands up to
continuous use
• Accepts both 4-1/2” and 5” grinding discs
5”
33 CFM @ 90 PSI
1/4”
• Spindle size: 5/8”-11 UNC
• Arbor size: 7/8”
• Removable side handle can be mounted on either side of the tool
4.25 lbs.
• Spindle lock
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
31
ANGLE GRINDERS / SANDERS WITH DUST EXTRACTION
Angle Grinders / Sanders
with Dust Extraction
L 1506 VV 4” and 4-1/2”, Electric
Extremely powerful 11 Amp angle grinder and sander
with variable-speed electronic motor. Vacuum port:
1-1/4”. Ideal for use with our CS 1225 or CS 1500 Dust
Extraction Vacuum (see below).
L 1506 VV with
dust extraction
L 1506 VV AIR 4” and 4-1/2”, Pneumatic
Extremely powerful 1 HP angle grinder and sander with
1 HP pneumatic motor. Vacuum port: 1-1/4”. Ideal for use
with our CS 1225 or CS 1500 Dust Extraction Vacuum
(see below).
(2200 to 6800 RPM)
5/8” Spindle
7/8” Arbor
Vacuum Port: 1-1/4”
L 1506 VV AIR
L 1506 VV Specifications
L 1506 VV
(6000 RPM)
(Hose not
included)
L 1506 VV AIR
Max. diameter 4-1/2”
4-1/2”
Speed 2200 - 6800 RPM
6000 RPM
Power 11 Amp
1 HP
Spindle 5/8”-11
5/8”-11
Weight 4 lbs.
4 lbs.
Air consumption –
Stepped Adapter
(optional) adapts
vacuum port to a
1-1/4” dia. hose
33 CFM @ 90 PSI
Air connection –
5/8” Spindle
7/8” Arbor
Part Number: 5.453-016
1/4”
Dust Extraction Vacuums for Tools
CS Unitec’s dust extraction vacuums offer strong 130 CFM air flow and an
automatic filter cleaning system to maximize vacuum power and dust collection.
The “Power Take-off” outlet activates the ON/OFF mode from the tool switch,
making these vacuums ideal for use with power tools. Manual ON/OFF is necessary
for pneumatic tools.
“Power
Take-off”
Outlet
• Ideal for use with power tools
• 99.93% filtration efficiency of particles 3.0 microns
is standard. HEPA filters are optional.
• Can also be used as a regular wet/dry vacuum
Stepped adapter and
15’ hose included as
standard equipment
with CS 1225 and
CS 1500
Vacuum Specifications
Power
Air flow
Tank capacity
Weight
32
•
1-800-700-5919
CS 1500
11 Amp
11 Amp
130 CFM
130 CFM
6.6 gal.
13 gal.
24.3 lbs.
35.2 lbs.
We make no claim that use of a vacuum will eliminate
contaminants. Wear an approved respirator mask and
follow all appropriate OSHA safety regulations for proper
ventilation, dust handling, eye protection, etc. when using
a dust extraction grinder and vacuum.
CS 1225
CS 1500
CS 1225
•
Visit our Web site at www.csunitec.com
Electric Grinders, Sanders & Polishers
This powerful 11 Amp, full-wave electronic grinder/sander has infinitely adjustable
variable speeds (2200 to 6800 RPM) and overload protection. It is a versatile tool
that is ideal for grinding, roughing, cutting, deburring and rust removal. This is
a popular choice among the metal, automotive and natural stone industries.
L 1509 FR is a single-speed (10,000 RPM), high-performance, 4-1/2” or
5” angle grinder.
L 3410 VR 4-1/2” and 5”
Compact, high-performance, variable-speed grinder/sander
L 1506 VR
(2200 to 6800 RPM)
The L 3410 VR is a small, agile grinder with a powerful 11 Amp, variable-speed motor
(3000 to 11,000 RPM). A flat aluminum die-cast gear head allows the tool to reach into the tightest
areas. No matter what the task and workspace, the slim, saddle-shaped motor housing and easilyaccessible side switch allow this grinder to sit perfectly in your hand for comfortable operation.
L 1509 FR
(10,000 RPM)
Specifications
L 1506 VR
Max. diameter 5”
L 1509 FR
L 3410 VR
5"
5"
Speed 2200 - 6800 RPM
10,000 RPM
3000 - 11,000 RPM
Power 11 Amp
11 Amp
11 Amp
Spindle thread 5/8”-11
5/8”-11
5/8”-11
Weight 4.2 lbs.
4.2 lbs.
4.1 lbs.
L 3410 VR
(3000 to 11,000 RPM)
Low-speed Polishers
For metal, stone, concrete, plastic, glass and more
CS Unitec offers several polishing tools for both dry and wet applications. These tools feature either double or triple
gear reduction for maximum torque with minimum motor load and a longer service life.
ELP 1300 Dry Polisher
ANGLE GRINDERS / SANDERS / POLISHERS
L 1506 VR 4-1/2” and 5”
Compact, high-torque, variable-speed grinder/sander
Removable handle
Triple gear reduction, 650 to 1150 RPM
CS Unitec’s ELP 1300 polisher is the ideal tool for low-speed dry
polishing, especially under heavy load. In combination with various
accessories, the ELP 1300 can be used for automotive, wood and
ELP 1300 (650 to 1150 RPM)
metalworking applications such as polishing, fine brushing, matte
finishing and sanding. This polisher is particularly suited for materials such as acrylic lacquer, glass, plastics and corian.
• Triple transmission reduction for
maximum torque with minimum motor
load and a long lifetime
• Compact, nonslip handle balances weight
distribution and minimizes vibrations
• Cover sheet for ventilation on the motor
housing provides added dust protection
Powerful 12 Amp motor is ideal for slowspeed polishing in the automotive and
furniture industries.
•
ELP 1300 Specifications
Power input
12 Amp (1300 W)
110 V / 60 Hz
(Also avail.: 230 V / 50 Hz)
Speed
650 - 1150 RPM
• Spindle stop for fast retooling
Max. diameter
9”
• Slim design for use in narrow spaces
Spindle thread
5/8”-11
Weight
6.4 lbs.
• Ergonomic on/off switch with
locking button
1-800-700-5919
•
Visit our Web site at www.csunitec.com
33
EPO 1301 Dry Polisher
Removable handle
POLISHING TOOLS
Double gear reduction, 1300 - 3050 RPM
The EPO 1301 is a powerful polisher for dry applications such as
sanding and polishing metal, stone, concrete and other materials.
When used with diamond sanding discs and velcro fastener, it is
effective for sanding edges and stone polishing within the workshop
or at the construction site.
EPO 1301
(1300 to 3050 RPM)
EPO 1301 Specifications
• Double gear reduction for maximum performance with minimum motor
load and a long service life
• Low wearing thanks to dust-protected gear bearings
Power input
12 Amp (1300 W)
110 V / 60 Hz
(Also avail.: 230 V / 50 Hz)
• Flat gearbox
Speed
• Compact, nonslip handle (removable)
• Cover sheet for ventilation on the motor
housing provides added dust protection
1300 - 3050 RPM
Max. diameter
5”
Spindle thread
5/8”-11
• Spindle stop for fast retooling
Weight
5 lbs.
• Slim design for use in narrow spaces
• Ergonomic on/off switch with locking button
CS Unitec...
Powered by Eibenstock
Removable handle
EPN 1301 P Wet Polisher
Double gear reduction, 3 speeds
The EPN 1301 P wet polisher for natural stone and concrete
applications is particularly suited for grinding and polishing edges
and curvatures. It also excels at removing scratches from granite,
marble and concrete. This polisher is ideal for stone cutters, natural
stone processing companies and concrete fabricators.
EPN 1301 P
(1300/2175/3075 RPM)
• Double gear reduction for maximum performance with minimum motor load and a long
service life; high torque output
• External water supply below the motor provides protection for the gearbox and easy
gear head guiding; no water flows across the motor or gearbox
• GFCI protective switch for isolating transformer helps ensure electrical safety
• Ventilation slots on the motor housing are covered, protecting against water seepage
• Three-speed switch with splash guard; water-protected electronic components
• Spindle stop for fast tool change
• Motor with special sealing
provides rust protection
Powerful 12 Amp motor is ideal
for wet polishing and grinding of
granite, marble and concrete.
EPN 1301 P Specifications
Power input
CS Unitec...
Powered by Eibenstock
(Also avail.: 230 V / 50 Hz)
3 speeds
34
•
1-800-700-5919
12 Amp (1300 W)
110 V / 60 Hz
•
1300 / 2175 / 3075 RPM
Max. diameter
5”
Spindle thread
5/8”-11
Weight
6.4 lbs.
Visit our Web site at www.csunitec.com
DS 301 Planetary Sander/Polisher
Sands, grinds, hones and polishes
DS 301, wet operation
This is a true planetary-driven
tool. The 12” platform turns at a
lower rate than the higher
rotational speed of the 5”
platens. This combination of
RPM provides the optimal speed
for polishing, producing a perfect
finish five times faster than a
single-head polisher. A center
coolant feed, precision bearings
and sturdy construction make
this the ultimate tool for perfect
finishes and superior polish.
DS 301 Specifications
Power
10 Amp
110 V / 60 Hz
12” platform speed
150 - 450 RPM
5” platen speed
3 platens
DS 301 with optional cowl for dry operation
Weight
750 - 2200 RPM
5” (with 5/8”-11 thread)
47 lbs.
Deburring, Beveling and Faceting Machines
(pages 36-39)
CS Unitec offers a line of deburring equipment for grinding, deburring, chamfering and
faceting. Fast and efficient, these machines are available in hand-held and table-top
models. See pages 36-39 for features and specifications on our full line of Deburring
and Beveling Machines.
SANDING / POLISHING / HONING MACHINE
The DS 301 planetary polisher produces a flat, swirl-free
finish on counter tops, floors, walls and steps. The unit will
grind, hone, polish and clean concrete, terrazzo, marble,
granite and corian surfaces using coated abrasives,
diamond polishing systems and lightweight diamond
wheels. The system operates wet by default, or dry with
an optional dust cowl.
Above: LKF450
Multipurpose Beveling
Machine. Bevel 30˚ or 45˚
and R2.5 radius
Above: EF 115 Deburring
and Faceting Machine. Ideal
for awkward, heavy parts,
frame constructions or large
sheets of metal.
Above Left: LKF200 Portable
Beveling Machine. Fast, easy
preparation of weld seams.
Bevels 15˚ to 60˚ angles on
plate or pipe.
Left: PEF 500 Faceting
and Deburring
Machine.
Adjustable 30˚to 60˚
facet angle and 0 to
3/8” facet width.
Above: BE 5 Sheet Metal Deburring
Machine. Double-sided deburring of
metal sheets from 0 to 0.2” thick.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
35
SHEET METAL DEBURRING MACHINE
ROLEI® BE 5 Sheet
Metal Deburring
Machine – 2 Speeds
Double-sided deburring of sheet metal up to 0.2”
thick can be achieved in a single operation with no
additional treatment. The machine’s flap wheels can
be easily adjusted as they wear. One set of wheels
lasts for approximately 6500 feet of stainless steel
sheet. Supplied standard with two 80 grit flap wheels,
the ROLEI® BE 5 can be used with other optional
grits to suit the facet width and materials of your
particular application.
Features two-speed operation:
Speed 1: fine deburring, 600 RPM
Speed 2: standard deburring, 1200 RPM
Optional accessories:
• Spare flap wheels (40, 60, 80, and 120 grit)
• Machine stand, made from strong steel
• Port for industrial dust extractor
• 440 V / 3-phase – Order No. 30310
220 V / 3-phase – Order No. 30310A
ROLEI BE 5 Specifications
3-phase motor
Can also be used on its side with
roller tables for large thin sheets.
(optional voltage)
Dimensions
Weight
Options
400 - 440 V 3-phase / 2 speeds
220 - 240 V 3-phase / 2 speeds
19.7” x 12.8” x 7.9”
64 lbs.
Machine stand, dust extractor
connection port, teflon tape
ROLEI BE 5 Flap Wheels
Deburring on
both sides of
the sheet edges
Sheet with burr
after cutting
Spare flap wheels for sheet
metal deburring machine BE 5
Grit 40, 60, 80, 120, 150
Machine stand - P/N: 30320
Strong steel machine stand with
black powder coating
Part No.
Grit
Qty.
37040
37060
37080
37120
30
60
80
120
2
2
2
2
Extension rail - standard, from
20” to 28” (included)
discs
discs
discs
discs
per
per
per
per
pack
pack
pack
pack
Teflon tape – self-adhesive
P/N: 30340 (20” length)
For extension rail to protect it
from scratching the workpiece
Width 3/4”; length 20” + 28”
36
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
This handy deburring machine is designed for awkward, heavy
parts, such as machine tables, frame constructions or large
sheets of metal. Easy to handle, with good edge control. The
EF 115 is also ideal for chamfering welds. Fixed beveling angle
of 45˚, infinitely adjustable facet width from 0” to 3/8”.
The handy ROLEI® EF 115 can
deburr and facet large, heavy
parts with ease. The precise
edge control guarantees clean
bevels at an angle of 45˚.
Rolei EF 115
110 V / 60 Hz
Variable speed: 2,000 to 7,600 RPM
Part No. 30116
QUICK-LOCK cable for
fast, easy replacement, e.g.
if the cable is damaged
ROLEI® EF 115 Specifications
H A N D - H E L D D E B U R R I N G A N D FA C E T I N G M A C H I N E
ROLEI® EF 115
Hand-held Deburring
and Faceting Machine
Available in 12 ft. and 33 ft. lengths
(accessories)
Universal motor
Speed
Weight
Options
Part no. 30116
12.27 Amp (1350 W) 110 V / 60 Hz
(230 V / 50 Hz, 1600 W also
available)
Simple disc changing
Infinitely adjustable
from 2,000 to 7,600 rpm
9 lbs.
Sliding guide rail, plastic
(P/N 30117, 2-piece set)
ROLEI EF 115 Flap Discs
Part No.
Grit
Qty.
21050A
21060A
21080A
21120A
50
60
80
120
10
10
10
10
discs
discs
discs
discs
•
per
per
per
per
pack
pack
pack
pack
1-800-700-5919
•
Visit our Web site at www.csunitec.com
37
D E B U R R I N G A N D FA C E T I N G M A C H I N E S
ROLEI® EF 165
Beveling and deburring machine with a fixed beveling angle of
45˚ and an infinitely adjustable beveling width from 0” to 3/8” for
all metals from stainless steel to aluminum. Precise adjustment
of the facet width using a hand wheel.
Optional accessories:
• Table extension (P/N 30110, 2 pieces, 5” x 13” each)
• Machine stand (P/N 30120)
• Extraction port for industrial dust extractor (P/N 30101)
• Spare flap discs (50, 60, 80, 120 grit)
ROLEI® EF 165 Specifications
Three-phase motor
Support table
Dimensions
Weight
Options
Part no. 30100
220 - 240 V, 400 - 440 V, 3-phase
5” x 13”
14” x 13” x 12”
40 lbs.
Table extension, machine stand,
extraction port for dust extractor
connection
Rolei EF 165
Speed: 2800 RPM
Supplied as standard with 80 grit disc. Other grits can
also be used to suit the facet width and materials.
ROLEI® PEF 500
Rolei PEF 500
Speed: 2800 RPM
Precision beveling and faceting machine for all metals from
stainless steel to aluminum. Infinitely adjustable beveling
angle from 30˚ to 60˚ and infinitely adjustable facet width
from 0” to 3/8” (precise adjustment using knob)
Optional accessories:
• Table extension (guide rail) from 20” to 28” (P/N 30240)
• Extraction port for dust (P/N 30230)
• Sliding feed plate, plastic (P/N 30240)
• Spare flap discs (grit 50, 60, 80, 120)
ROLEI® PEF 500 Specifications
Three-phase motor
Dimensions
Weight
Options
Part no. 30200
220 - 240 V, 400 - 440 V, 3-phase
20” x 14” x 14”
88 lbs.
Table extension, machine stand,
extraction port for dust extractor
connection
Parts are beveled
with perfect crossgrinding – absolutely
no opposite burr.
Supplied as standard with 80 grit disc. Other grits can
also be used to suit the facet width and materials.
38
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Multipurpose Beveling Machine
Bevel, deburr and chamfer edges of steel plate fast
• Fine adjustment feature for slight chamfers when deburring for the
preparation of weld seams
• Three milling heads – 30˚, 45˚ and radius R2.5 – are available
LKF450
• Ideal for the following applications: Moldmaking (straighten edges, internal and
external radii and countersink holes from 7/8” dia.); Boiler and process plant
construction (prepare weld seams on heat exchangers); Mechanical
engineering (deburr machine parts, chamfer edges to protect against
paint peeling and create visible edges); Sheet metal (deburr cut edges)
30˚
45˚
LKF1202
milling head
LKF1201
milling head
LKF1203 milling head
R2.5 radius (only insert shown)
Portable Beveler Specifications
LKF450-2A*
LKF450-2*
LKF200
Beveling angle*
30˚
45˚
15˚ - 60˚
Bevel width (max.)**
1/4”
1/4”
5/8”
10 Amp
10 Amp
14 Amp
Motor power
Voltage
3000 SFPM
3000 SFPM
1800 SFPM
Cutting inserts
2
2
12
Weight
LKF200 (below) standard equipment includes two
milling heads, each with six sintered carbide reversible
cutting inserts, tools for assembly, LKF pipe roller
guide, steel carrying case and user’s manual. Please
see our Price List for available accessories.
All machines: 110 V (220 V / 50 Hz also available)
Cutting speed
Dimensions (L x W x H)
LKF450 (above) standard equipment includes
milling head and two inserts, SW22 key, carrying case
and user’s manual. Please see our Price List for
available accessories.
12-1/2” x 5-1/2” x 11-5/8”
10.5 lbs.
10.5 lbs.
POR TABLE BEVELING MACHINES
The LKF450 is designed to bevel 30˚ or 45˚ weld seams on steel, stainless steel,
nonferrous metals, brass and plastics. It can also be used to deburr and chamfer;
straighten edges, internal and external radii; and countersink holes from
7/8” diameter.
16-1/2” x 13” (L x H)
42 lbs.
* LKF450 milling heads are interchangeable.
** Max. bevel width may require several passes, depending on material hardness
LKF200
Portable Beveling Machine
Bevel angles from 15˚ to 60˚ on plate and pipes
CS Unitec’s LKF200 Beveling Machine provides fast and easy preparation
of weld seams and bevels 15˚ to 60˚ angles on plate or pipe. It is ideal for
use on steel, stainless steel, aluminum and nonferrous metals and offers
high-quality performance that allows for superior weld connections.
• Continuously adjustable angle (15˚ to 60˚) and land width up to 5/8”
• Robust design, single operator control and easy handling; designed for
continuous operation with smooth roller guides
• Includes two milling heads and 12 total indexable inserts for fast metal
removal and extended tool life
• Work on welding angles and weld preparation on pipes/tubes with a
minimum OD of 6-1/4” (160mm) with included pipe roller guide; also
ideal for beveling pipe 6-1/4” OD and larger
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
39
Also available from
:
CS Unitec, Inc. specializes in electric, pneumatic and hydraulic power tools for construction and industry.
Innovation and high quality are synonymous with CS Unitec's power tools. In 1991, the company invented
the first pneumatic portable band saw. CS Unitec has added to its list of industry firsts with the widest
range of portable magnetic drills and hand-held concrete core drills. The line also includes electric,
pneumatic and hydraulic portable band saws, reciprocating saws, hack saws, nut runners, rotary hammer
drills, rolling motors, non-sparking tools, portable mixers, dust extraction tools and vacuum systems.
… the power of innovation! ®
For more information, please visit our Web site at www.csunitec.com.
View product demonstrations at www.csunitec.com.
Electric, Pneumatic and Hydraulic Tools
Slow-speed Drive Units
for high-torque turning
Air Reciprocating Saws
Annular Cutters for fast,
accurate hole cutting
Electric
Magnetic
Drills for
cutting up
to 5” holes
in metal
Non-sparking Safety Tools
Portable
Hacksaws for
pipe cutting up
to 24”
Electric,
hydraulic and
pneumatic Handheld and Rigmounted Core Drills for
concrete; Water-recycling
Vacuum also available
CS UNITEC, Inc.
22 Harbor Avenue, Norwalk, CT 06850
Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921
Email [email protected] • www.csunitec.com
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE
© Copyright 2008, CS Unitec, Inc., 09-08-10M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement