ZIPABOX - KOTi.sk
ZIPABOX
USER
GUIDE
v1.4
How can I
manage all
security issues
with one
easy, intuitive
and efficient
solution?
CONNECT EVERYTHING
This guide
describes
how to install,
program and
operate Zipato
smart alarm
system.
02
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
COPYRIGHT
© 2012 Tri plus grupa d.o.o. All Rights Reserved. Copyright by Tri plus grupa d.o.o.
www.zipato.com
03
IMPORTANT SAFETY INFORMATION
To avoid contact with electrical current:
No part of this manual may be reproduced or transmitted in any form without the
Never
expressed, written permission of Tri plus grupa d.o.o.
specifically designed for wet locations.
Do
TRADEMARKS
ZIPABOX
QUICK INSTALLATION GUIDE
install an Ethernet connection in wet locations unless that connector is
not place Ethernet wiring or connections in any conduit, outlet or junction box
containing electrical wiring.
Zipato and the Zipato logo are registered Trademarks.
Installation of inside wire may bring you close to electrical wire, conduit, terminals
All other product names mentioned herein may be trademarks or registered
and other electrical facilities. Extreme caution must be used to avoid electrical
trademarks of their respective companies.
shock from such facilities. Avoid contact with all such facilities.
Ethernet wiring must be at least 2 m from bare power wiring or lightning rods and
NOTICE
associated wires, and at least 15 cm from other wire (antenna wires, doorbell
Although Zipato has attempted to ensure the accuracy of the content of this manual,
wires, wires from transformers to neon signs), steam or hot water pipes, and
it is possible that this document may contain technical inaccuracies, typographical,
heating ducts.
or other errors. Zipato assumes no liability for any error in this publication, and
for damages, whether direct, indirect, incidental, and consequential or otherwise,
ELECTROMAGNETIC COMPATIBILITY
that may result from such error, including, but not limited to loss of data or profits.
In proper state and when operated properly, the product complies with all the
Zipato provides this publication “as is” without warranty of any kind, either express
requirements in respect of interference radiation according to EN 301 489-17, EN
or implied, including, but not limited to implied warranties of merchantability or
301 489-1 and EN 300 328. The connections conducting HF signals must neither be
fitness for a particular purpose. The published information in the manual is subject
manipulated nor damaged.
to change without notice.
Zipato reserves the right to make changes in the product design, layout, and driver
revisions without notification to its users.
04
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
CONTENTS
INTRODUCTION www.zipato.com
ZIPABOX
QUICK INSTALLATION GUIDE
05
INTRODUCTION
05
THANK YOU for purchasing Zipabox smart home automation controller. This
guide describes how to install, program and operate your Zipabox. Zipabox makes
PACKAGE CONTENTS
12
CONNECT THE ZIPABOX
13
ACCOUNT CREATION AND REGISTRATION
15
to the cloud so that consumers can control them using tablets, smart phones,
INSTALLATION/MOUNTING ZIPABOX
18
of communication standards including Z-WAVE, ZIGBEE, KNX, ONVIF, and UPnP.
ADDING DEVICES
20
REMOVING DEVICES
20
TROUBLESHOOTING
21
SPECIFICATIONS
24
LIMITED PRODUCT WARRANTY
26
Once configured, the gateway works stand-alone, but also features cloud support
DECLARATION OF CONFORMITY
32
Intuitive graphical user interface allows customers to program their own home
every home smart by using advanced technology to hide the complexity of home
networking - delivering a simple smart home. It plugs into any outlet in the home
and automatically talks to all the connected devices in the house, connecting them
computers or TVs— at home or on the go. The Zipabox Gateway supports a variety
The Zipabox’s capabilities can easily be expanded using “snap-in” expansion
modules that will add support for new interfaces and functionalities, communication
standards and protocols, etc.
for advanced monitoring, messaging and programming services.
rules without any previous programming experience.
06
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
www.zipato.com
01
SECURITY
AND SAFETY
ZIPABOX
QUICK INSTALLATION GUIDE
02
LIGHTING
unlimited number of virtual alarms (partitions)
easy installation of wireless modules
up to 233 two-way, wireless zones
Z-Wave and ZigBee lighting modules pre-configured for even easier setup
trigger alarms in case of:
support remote dimming and on/off switching with any smartphone
intruder (motion sensors and door/window sensors),
automatically turn lights on at sunset and off at sunrise
fire (smoke sensors),
unlimited number of scenes supported
flood (water leakage sensors),
turn lights on during emergencies
gas (CO sensors)
advanced event based rules configuration
panic button,
auto-pilot lighting programs to discourage intruders while home is empty
duress (if someone force you to disarm your system)
health care (in case of missing actions during particular time e.g. motion, door
03
CLIMATE
opening, laying on bed...)
remote arm/disarm and status-info with any smartphone
v andal
07
proof - Zipabox is 24/7 monitored by central station which triggers alarm
in case of connection loss
multi-room heating and cooling control with any smartphone
include arm/disarm commands in automation scenes
advanced programming scheduler online, accessible over web browser
integration with existing alarm systems (DSC, Honeywell...)
easily create unlimited number of custom zones (thermostats)
easy online setup and configuration through web based interface
multi-zone humidity control by using standard humidifiers and dehumidifiers
use of same sensors for security and automation purposes
use Internet weather feeds to program your home climate conditions
create
advanced event based rules to automate home climate based on other
08
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
www.zipato.com
environmental and home events
integrate
include climate control in automation scenes together with alarm, lighting, etc.
scenarios
Notification
ZIPABOX
QUICK INSTALLATION GUIDE
09
your irrigation scheme together with your complete home automation
and automated actions in case of overtemperature events, power
outages, and other incidents…
04
SUN
SHADING
06
ACCESS
remotely lock/unlock your door with any smartphone
remotely open/close your garage door or gate over any smartphone
control blinds, roller-shutters, curtains and pergolas using any smartphone
get video notification when door is open
automate motors by using fun and easy programming
use RFID tags to open doors and get detailed statistics
add
automate doors/locks using scenarios and event based programming tool
your sun shading commands into home scenarios together with lights,
climate, alarms...
trigger automation events when door lock user codes are entered
automate your shades to react to outside weather conditions
automatically unlock doors in the event of an emergency
easy installation using pre-configured wireless modules
05
IRRIGATION
07
MULTIMEDIA
remotely control your audio/video equipment with any smartphone
control unlimited number of irrigation zones
automatically turn on favorite shows when they air and get alerts
use advanced programming options online to setup perfect irrigation process
automatically turn off A/V equipment at pre-set time or when room is unoccupied
automate irrigation system based on Internet weather forecast
automatically turn on equipment to discourage intruders
10
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
08
VIDEO
MONITORING
access live and recorded video via the web and from any smartphone
www.zipato.com
ZIPABOX
QUICK INSTALLATION GUIDE
11
10
TECHNICAL
SUPPORT
HAVING TROUBLE INSTALLING YOUR NEW PRODUCT?
support for most of the available IP cameras – ONVIF support
Zipato’s website contains the latest user documentation and software updates for
get email and SMS notifications with pictures and live video attached
Zipato products and services.
remotely adjust pan-tilt cameras
create advanced event based recording and video notification rules
09
ENERGY
METERING
www.zipato.com
CONTACT SUPPORT
E-MAIL: [email protected]
(Mon-Fri) 9.00am-05.00pm (CET)
real-time monitoring energy consumption and notification right on smartphone
compare energy usage and cost with others in the area
automatically turn on/off your appliances in accordance with electricity prices
see detailed analysis of your energy consumption
s ave energy by automating lights, thermostats, sun shades...
12
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
PACKAGE CONTENTS
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
13
CONNECT THE ZIPABOX
Your Serial number is located on the back of the Zipabox, make a note of it as it will
be required when registering your panel online.
CONNECT TO BROADBAND
USER
GUIDE
ZIPABOX
Connect your Zipabox to your broadband router via the Ethernet cable.
The Ethernet port is located on the top of the Zipabox.
Zipabox queries your DHCP server for an IP address. If you do not have a DHCP
server in your local network, after 60 seconds Zipabox will auto configure itself with
link-local IPv4 address (in 169.254.0.0/16 range).
01
POWER ADAPTER
230V AC TO
12V DC
ETHERNET
CABLE
868 MHZ ANTENNA
FOR Z-WAVE
NETWORK
01
Serial
number
02
ntenna
A
1
03
ntenna 2
A
(optional)
04
Reset
button
05
thernet
E
port
06
ower
P
input
02
03
04
05
06
14
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
MOUNT ANTENNA
Screw Z-wave antenna to Antenna 1 connector
POWER UP
Plug the power adaptor into mains supply wall socket and the other end into control
unit. You should see following LED sequence:
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
15
ACCOUNT CREATION
AND REGISTRATION
ACCOUNT CREATION
01 | PLUG IN POWER ADAPTOR: steady yellow light for approximately 60 sec.
To benefit from the Zipato monitoring and control service you will need to set up your
02 | STEADY BLUE LIGHT (after short purple and yellow light): Linux OS is loading
Zipato account and register your Zipabox. Upon registration you will automatically
03 | BLUE LIGHT BLINKING: Java application is loading
get the basic free level of monitoring service.
04 | ZIPABOX GETTING READY: slowly flashing green light
Open a browser window on your computer and go to the following URL: my.zipato.com
05 | ZIPABOX READY: steady green light
Click on “Sign Up!” button in the middle of the screen and fill out all required fields
01
01
Button
1
02
Button
2
03
LED
indicator
02
03
that will popup in the line below the “Sign Up!” button.
Fill out empty fields
Take note of your password
Click on “Register”
during this process.
16
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
www.zipato.com
ZIPABOX
QUICK INSTALLATION GUIDE
17
Once you input registration data and click on register, the following message will
pop up:
“Thank you for signing up!
Please check your e-mail for confirmation message.”
When this message appears check your email account. If there is no email please
check spam container.
Enter the serial number located at back of your Zipabox
Email should look like this:
S erial
“Hi, your email here, welcome to the Zipabox!
“Allowed registration time elapsed”. This is done because security precaution. If
To validate your email address please click on the following link verify.”
this happens restart Zipabox and reenter serial number.
number must be entered within 2 min. If not, message will appear saying
Once email is verified, login to Zipato by filing out credentials.
FINALIZE YOUR ACCOUNT
Your account is set up and you are able to use Zipato cloud system. Anyway, you
need to ensure that your account is fully set up so you get the most from your Zipato
account. THIS INCLUDES: Account Details
Make sure that you have fully completed your profile. Go to “General” options on the
left sidebar and select “User details”.
REGISTER YOUR ZIPABOX
USERS
When you first time log in to your account, you need to enter serial number of your
In the “General” options under the “Users” section is where you add your family
Zipabox. Serial number is located on back of your Zipabox.
members which will have the rights to use your system. Adding a new user
requires you to enter new user’s details and to give him/her certain rights. Rights
management allows you to permit some services for some users.
18
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
INSTALLATION/
MOUNTING ZIPABOX
www.zipato.com
ZIPABOX
QUICK INSTALLATION GUIDE
DIN RAIL MOUNTING
Make enough space for Zipabox on your Din-rail. Hook upper fitters on the back of
your Zipabox to the Din rail and press Zipabox slightly to snap lower fitters.
WALL MOUNTING
Drill holes in the wall surface and insert the wall plugs if fixing into plaster or brick
01
Upper
fitters
01
holes. Drill two holes, fix the screws and hook the Zipabox onto the screw’s heads.
Lower
02
fitters
02
Make sure swivel antenna is in vertical position.
19
01
TABLE TOP
You can place your Zipabox on any table top. Just make sure that swivel antenna is
in vertical position.
Holes
01
for fixing
Zipabox
on screw’s
heads
Button
1
01
Button
02
2
02
LED
03
indicator
03
01
20
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
ADDING DEVICES
ADDING NEW DEVICES Z-WAVE OR ZIGBEE
www.zipato.com
ZIPABOX
QUICK INSTALLATION GUIDE
21
TROUBLESHOOTING
Waiting for more than a five minutes and still there is no green LED light.
Before adding new device, it is recommended to bring device closer to Zipabox,
01 | Check your Internet connection
so that no obstacle can interfere with operating range of device. Recommended
02 | Check whether you connected your network cable correctly to your Internet router.
distance between sensors and Zipabox is less than one meter. Read device
instructions regarding inclusion/join mode. Device in inclusion/join mode is awake
I forgot my password
and ready for joining in to Zipato network. Always reset device before adding it to
01 | Go to my.zipato.com
the network. Reset deletes any information about prior controller that was stored in
02 | Click “Forgot password” and follow screen instruction.
device. At the end of joining or removing session it is recommended to synchronize
everything and refresh Zipato Control Center.
I cannot connect any Z-wave or ZigBee device to my box
01 | On Zipato dashboard, go to the “General” options and in “Device manager” click
Check whether your antenna supplied with Zipabox is correctly mounted on Antenna
“Add new device” button and follow wizard instructions.
1 connector.
02 | After you successfully add the device into your Zipato network go to “General”,
select “Device manager”, click on the Network protocol of this device (e.g. Z-Wave) and
set your device’s room name and type. This will help you to easier control your device.
LED indications on Zipabox
Zipabox can be in various states which can be determined by the following LED
indication:
REMOVING DEVICES
01 | No lights – Zipabox is not connected to the power supply
01 | Go to “General” options, select “Device manager”, Network protocol to which
02 | Steady blue light (after short purple and yellow light) - Linux OS is loading
this device belongs (e.g. Z-Wave) and find this device;.
03 | Blue light blinking - JAVA application is loading
02 | Click on the trash can beside the device and in the popup window confirm deleting
04 | Green light blinking - Zipabox initiates connecting to the Cloud Server and will
03 | Click on the Synchronize button and refresh the Internet browser.
stay in this state if the stable connection cannot be established
22
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
www.zipato.com
ZIPABOX
QUICK INSTALLATION GUIDE
23
05 | Steady green light - Zipabox has a stable connection to the Cloud Server
“Allowed registration time elapsed”. This is done because security precaution. Allowed
06 | Red light - alarm is armed, it will change back to steady green light when alarm
registration time starts ticking away after Zipabox establishes connection with the
is disarmed
07 | F
lashing red light - alarm has been tripped
cloud server after power up/reset. So just reset your Zipabox, wait for the light to turn
steady green, and the login into the cloud application and enter the serial number.
Note: If you do occasionally notice flashing/blinking green light for a few seconds
on the Zipabox during the stable connection to the Cloud Server, please ignore this.
I have added device to Zipabox, but is not working properly?
If your device is not working properly try to reinstall it again. Make sure when adding
I
have placed a device outside my house and it is not communicating with the
Zipabox. What’s happening?
new device that join procedure is completed. If join procedure is successful you will
get message “Device joined” and Close button will appear.
If you have a lot of metal in the exterior construction of your home, this could
significantly impede wireless communication. Metal is an insulator of radio signals. If
What happens when adding new device is interrupted?
your house has metal siding or a stucco finish over a metal mesh, you may have range
If device shows up in “Device manager”, in beloging Network protocol, delete it and
problems on devices outside your home communicating with the Zipabox inside.
then add this device again. If that device is not shown in “Device manager” window
just add this device again.
What should I do if I am having trouble installing my device?
If you are having difficulty with the physical installation of non-Zipato branded
Do not forget to synchronize
devices (Thermostats, GE switches, Blueline meter reader, etc.), please contact the
When doing changes with your device like changing endpoint name, configuration or
manufacturer directly for assistance.
any change regarding devices and their endpoints, remember to click on synchronize.
If you are having trouble pairing a device to the Zipabox, check the videos or other
content on Zipato website for assistance.
Does Zipato offer a warranty?
See the Limited Product Warranty for specifics of the Zipato service warranty.
Error “Validation time expired”
Serial number must be entered within 2 min. If not, message will appear saying
24
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
SPECIFICATIONS
SYSTEM
ACCESSORIES
www.zipato.com
Online remote control interface
CAT5e UTP patch LAN Cable
Safety: UL
64MB RAM
Antenna Z-wave
EMC: FCC, CE
128MB Flash
Optional antenna for Zipabox Duo:
RoHS
POWER
zbzwueg / zbzweuzbeeg - 868.42 MHz
Power input: 9-12VDC
zbzwus / zbzwuszbeeg - 908.42MHz
Power supply input: 110-230VAC,
zbzwru / zbzwruzbeeg - 869.02MHz
50/60Hz
zbzwis / zbzwiszbeeg - 916.02MHz
Power usage: Idle: 1.2W, Max: 2.4W
zbzwau / zbzwauzbeeg - 921.42MHz
zbzwin / zbzwinzbeeg - 865.20MHz
I/O & LEDS
2 programmable buttons
OPERATING SYSTEM
Linux 2.6 Kernel
2 programmable green LEDs
1 programmable RGB LEDs
Power, Status, Ethernet & Z-Wave
PHYSICAL DIMENSION
86 (L) x 86 (W) x 47 (H) millimeters
34(L)x 34 (W) x 19 (H) inches
AUTOMATION OPTION
Remote automation software
Operating: 0°C to 40°C (32°F to
Storage: -25°C to 70°C (-13°F to
158°F)
Humidity: 5% to 95% noncondensing
WARRANTY
1 year standard
ZigBee, 433MHz, EnOcean...
NETWORK
25
104°F)
EGULATORY COMPLIANCE
R
(PENDING)
ARM9 208MHz CPU
Ethernet / Z-Wave / ZigBee (option)
ZIPABOX
QUICK INSTALLATION GUIDE
ENVIRONMENTAL
Temperature Range:
Specifications are subject to change
without prior notice
26
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
LIMITED PRODUCT
WARRANTY
GENERAL TERMS
www.zipato.com
ZIPABOX
QUICK INSTALLATION GUIDE
27
INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR OTHER
DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE.
HOWEVER, NOTHING IN THIS AGREEMENT LIMITS ZIPATO’S LIABILITY TO YOU
(I) IN THE EVENT OF DEATH OR PERSONAL INJURY TO THE EXTENT RESULTING
FROM ANY FRAUDULENT MISREPRESENTATION ON THE PART OF ZIPATO, OR (III)
TO THE EXTENT ARISING UNDER PART 1 OF THE CONSUMER PROTECTION ACT
Nothing in this Limited Product Warranty affects your statutory rights as a consumer.
1987 OF THE UNITED KINGDOM. SOME STATES OR COUNTRIES DO NOT ALLOW:
The Limited Product Warranty set forth below is given by Tri plus grupa d.o.o.
(1) A DISCLAIMER OF IMPLIED WARRANTIES; (2) A LIMITATION ON HOW LONG AN
(Europe) (herein referred to as “ZIPATO”). This Limited Product Warranty is only
IMPLIED WARRANTY LASTS OR THE EXCLUSION; OR (3) LIMITATION OF INCIDENTAL
effective upon presentation of the proof of purchase. Upon further request by
OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS. IN SUCH STATES OR
ZIPATO, this warranty card has to be presented, too.
COUNTRIES, SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY MAY
NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
EXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED WARRANTY, ZIPATO MAKES
YOU MAY ALSO HAVE OTHER RIGHTS THAT MAY VARY FROM STATE TO STATE OR
NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
FROM COUNTRY TO COUNTRY. YOU ARE ADVISED TO CONSULT APPLICABLE STATE
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
OR COUNTRY LAWS FOR A FULL DETERMINATION OF YOUR RIGHTS.
ZIPATO EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED
WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE
This Limited Product Warranty applies to ZIPATO branded hardware products
LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD.
(collectively referred to as “ZIPATO Hardware Products”) sold by ZIPATO (Europe),
TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY
its European subsidiaries, affiliates, authorized resellers, or country distributors
STATEMENT ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES AGAINST
(collectively referred to as “ZIPATO Resellers”) with this Limited Product Warranty.
ZIPATO. THEY DO NOT, HOWEVER, AFFECT OR RESTRICT THE RIGHTS YOU
The term “ZIPATO Hardware Product” is limited to the hardware components and all
HAVE AGAINST THE BUSINESS YOU BOUGHT A ZIPATO PRODUCT FROM. IN NO
its internal components including firmware. The term “ZIPATO Hardware Product”
EVENT WILL ZIPATO BE LIABLE FOR LOSS OF DATA OR FOR INDIRECT, SPECIAL,
DOES NOT include any software applications or programs.
28
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
GEOGRAPHICAL SCOPE OF THE LIMITED PRODUCT WARRANTY
www.zipato.com
ZIPABOX
QUICK INSTALLATION GUIDE
29
improper use or storage; or (f) fire, water, acts of God or other catastrophic events.
This Limited Product Warranty is applicable to Hardware Products sold by Zipato
This warranty shall also not apply to any particular product if any ZIPATO serial
Resellers in all countries listed at the beginning of this document under the heading
number has been removed or defaced in any way.
“Countries in which this ZIPATO Limited Product Warranty applies”. The Limited
ZIPATO IS NOT RESPONSIBLE FOR DAMAGE THAT OCCURS AS A RESULT OF YOUR
Product Warranty will be honored in any country where ZIPATO or its authorized
FAILURE TO FOLLOW THE INSTRUCTIONS FOR THE ZIPATO HARDWARE PRODUCT.
service providers offer warranty service subject to the terms and conditions set
forth in this Limited Product Warranty. However, warranty service availability
LIMITED PRODUCT WARRANTY PERIOD
and response times may vary from country to country and may also be subject to
The Limited Product Warranty Period starts on the date of purchase from ZIPATO.
registration requirements.
Your dated sales or delivery receipt, showing the date of purchase of the product, is
your proof of the purchase date. You may be required to provide proof of purchase
LIMITATION OF PRODUCT WARRANTY
as a condition of receiving warranty service. You are entitled to warranty service
ZIPATO warrants that the products described below under normal use are free
according to the terms and conditions of this document if a repair to your ZIPATO
from material defects in materials and workmanship during the Limited Product
branded hardware is required within the Limited Product Warranty Period.
Warranty Period set forth below (“Limited Product Warranty Period”), if the product
[Other than in respect of products for domestic use (in particular those listed in
is used and serviced in accordance with the user manual and other documentation
the first and last boxes in the table below), this Limited Product Warranty extends
provided to the purchaser at the time of purchase (or as amended from time to time).
only to the original end user purchaser of this ZIPATO Hardware Product and is not
ZIPATO does not warrant that the products will operate uninterrupted or error-free
transferable to anyone who obtains ownership of the ZIPATO Hardware Product
or that all deficiencies, errors, defects or non-conformities will be corrected.
from the original end-user purchaser.
This warranty shall not apply to problems resulting from: (a) unauthorized
alterations or attachments; (b) negligence, abuse or misuse, including failure to
operate the product in accordance with specifications or interface requirements;
(c) improper handling; (d) failure of goods or services not obtained from ZIPATO
or not subject to a then-effective ZIPATO warranty or maintenance agreement; (e)
30
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
PRODUCT WARRANTY PERIOD TABLE
PRODUCT TYPE
Product Warranty Period
ZIPABOX CONTROLLER
One (1) year
www.zipato.com
ZIPABOX
QUICK INSTALLATION GUIDE
31
PERFORMANCE OF THE LIMITED PRODUCT WARRANTY
If a product defect occurs, ZIPATO’s sole obligation shall be to repair or replace
any defective Zipato Hardware Product free of charge provided it is returned to an
Authorized ZIPATO Service Centre during the Limited Warranty Period. Such repair
or replacement will be rendered by ZIPATO at an Authorized ZIPATO Service Centre.
IMPORTANT: The content of “Product Type” listed above is subject to change; please
All component parts or hardware products that are replaced under this Limited
refer to the www.zipato.com for latest update.
Product Warranty become the property of ZIPATO. The replacement part or product
takes on the remaining Limited Warranty Period of the replaced part or product.
The replacement product need not be new or of an identical make, model or part;
ZIPATO may in its discretion replace the defective product (or any part thereof) with
any reconditioned equivalent (or superior) product in all material respects to the
defective product.
WARRANTOR
Tri plus grupa d.o.o.
Banjavciceva 11
10 000 Zagreb
CROATIA
TEL +385 (0)1 4004 404
FAX +385 (0)1 4004 405
32
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
DECLARATION OF
CONFORMITY
www.zipato.com
ZIPABOX
QUICK INSTALLATION GUIDE
33
Changes or modifications not expressly approved Tri plus grupa d.o.o. for compliance
could void the user’s authority to operate the equipment.
The Manufacturer Tri plus grupa d.o.o. hereby declares that the product:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
Zipabox Smart home controller 1 (zbzweugv1)
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
In accordance with the following Directive(s): 2006/95/EC The Low Voltage
Directive, 89/336/EEC The Electromagnetic Compatibility Directive and 1999/5/
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
EC R&TT EC Directive is in conformity with the e applicable requirements of the
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
following documents:
suivantes :
EN 61326
EN 61000-3-3
EN 61000-4-4
EN 61000-4-11
(1) l’appareil ne doit pas produire de brouillage, et
IEC/EN 55011
EN 61000-6-2
EN 61000-4-5
EN 301 489-1-3
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
EN 300 220-2
EN 61000-4-2
EN 61000-4-6
AS/NZS/IEC 60335-2-97
même si le brouillage est susceptible d’en compromettre le fonctionnement.
EN 61000-3-2
EN 61000-4-3
EN 61000-4-8
EN 60335-1
I hereby declare that the equipment named above has been designed to comply with
NOTE: Changes or modifications not expressly approved by Zipato for compliance
the relevant sections of the above referenced specifications. The unit complies with
could void the user’s authority to operate the equipment. This equipment has been
all applicable Essential Requirements of the Directives.
tested and found to comply with the limits for a Class B digital device, pursuant
PERSON RESPONSIBLE FOR THIS DECLARATION:
to Part 15 of the FCC Rules. These limits are designed to provide reasonable
Dean Janacek, Certification Manager
protection against harmful interference in a residential installation. This equipment
34
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
generates, uses and can radiate radio frequency energy and, if not installed and
www.zipato.com
ZIPABOX
QUICK INSTALLATION GUIDE
35
DISPOSING AND RECYCLING YOUR PRODUCT
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in
a particular installation.
This symbol on the product or packaging means that according to local laws and
If this equipment does cause harmful interference to radio or television reception,
regulations needs to be disposed of separately from household waste and sent to
which can be determined by turning the equipment off and on, the user is encouraged
recycling because it contains electronic components. Once this product has reached
to try to correct the interference by one or more of the following measures:
the end of its life, please take it to a collection point (recycle facilites) designated
Reorient or relocate the receiving antenna.
by your local authorities, some will accept your product for free or simply drop
Increase the separation between the equipment and receiver.
it off at your Zipato re-seller store. By recycling the product and its packaging in
Connect the equipment into an outlet on a circuit different from that to which the
this manner you help to conserve the environment and protect human health. At
receiver is connected.
Zipato, we understand and are committed to reducing any impact our operations and
products may have on the environment. To minimize this impact Zipato designs and
builds its products to be as environmentally friendly as possible, by using recyclable,
low toxic materials in both products and packaging.
36
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.com
make your home smart
www.zipato.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement