Automatic
Pet Feeder
4L
User Manual
Specification
Programming: up to 5 meals per day, portionable in 5g increments, max. filling 200g.
Product Weight: 1.5kg (without batteries and food)
Product Size: L206mm x W341mm x H321mm
Capacity: 4L (dry food pellets between 2-15mm only )
Dual Power Supply: Output DC power adapter, 5V - 1A // 3 x D battery.
Setting Memory: After a power outage, only the clock needs to be reset, the feeding times have been saved automatically from before.
On battery supply only, the feeder works up to 3 months.
To prevent food jams, the grain size should not exceed 15mm.
Batteries are not included.
Product Features
Desiccant valve keeps kibble dry and fresh.
2 Top lid to protect kibble from pet access.
Transparent food canister to check filling status.
4 Intuitive touch panel.
5 Detachable body for easy maintenance
6 Separate 304 stainless steel food bowl
7 Dual power supply, always remain functional
2
4 5
6
7
1
Setting up the Feeder
1 ) Assemble the food bucket, lid and food trays as shown below pictures.
Insert the food bucket into the slot and rotate clockwise to lock.
Rotate clockwise to fix the lid.
Insert the feeding tray into the bottom slot.
2 ) Dual power mode: Connect the USB cable to the machine and plug in the power adapter. If you do not wish to use the power adapter for power supply, install 3 D-type batteries on the bottom of the machine. Dual power supply is recommended.
Ensure the battery poles are correctly directed.
3 ) Open the lid as shown below and lock after food is added.
Rotate counterclockwise to open Rotate clockwise to lock
2
Operating the Touch Panel
Time
Standby: Current time.
Setting mode: Set the current time first, then setting the feeding time for each meal.
Portion Increase
& Manual Feeding
Setting Mode
Standby : Long press--Enter setting mode.
Setting mode: Long press -- Increase the value quickly
Long press--Exit setting mode.
Standby: Short press -- Manual feeding.
Setting mode: Short press -- Increase value.
Lock Button
Standby:
Long press: Unlock (hear two beeps)
Locked (hear a long beep)
Setting mode:
Short press: Back to last step.
Portion Decrease
& Record and Playback
Standby:
Short press -- Play recording.
Long press -- Record voice or cancel recording.
Setting mode:
Short press -- Decrease value.
Long press -- Decrease the value quickly.
Number of meals
Setting mode: The digit flashing.
Feeding: number of meals indicated by dot .
Not feeding: no number is indicated.
Battery indicator
No Flashing:
Sufficient battery power.
Indicator light flashing:
No battery inserted.
Double flashing light:
Battery needs to be replaced.
Note:
To clear all settings, restore the factory settings:
While the screen is unlocked, press the “ ” and “ ” buttons at the same time for 2 seconds, after hearing the "beep".
The screen will be locked automatically after 3 minutes without operating.
The LED screen will light up but stay locked when you touch any button. Long press the “ ” to unlock buttons.
3
Quick Programming Guide
First, ensure the panel is unlocked -- press the “ ” until you hear two beeps.
( 1 ) Before use
Ensure the feeder is normally powered.
Short Press the " " , the feeder instantly release one portion. Repeat this step for 3 times to make sure the feeder work normally.
Standby: Short press -- Manual feeding.
Setting mode: Short press -- Increase value.
Long press -- Increase the value quickly
( 2 ) Setting time
Long press " " until the digits start flashing. Press " " or " " to set the correct hour and then short press " " to save. Repeat to set the minutes.
Example: set current time to 21:51.
( 3 ) Meal time setting
Once the time is set, the feeder will switch to meal time setting. When “1” starts flashing, press " " or " " to choose “ON” or “OFF”, “ON” means feeding; “OFF” means no feeding.
Once you set “ON” for 1st meal, short press set button and repeat step 2) above to set the feeding time.
ON = Feeding OFF = Not feeding
Set feeding time(hour)
4
Set feeding time(minute)
Once feeding time is set and saved, the feeder will switch to portion mode. The screen will display “F-XX” (XX for the number of 5g increments), ex. For a 50g portion, choose F-10. Then press " " and " " to set the portions and then press " " again to save.
Repeat for meals 2 through 5. Long press " " to save once you set all meals.
For a 50g portion, choose F-10 Second meal feeding setting
( 4 ) Voice recording and playback
:
Start recording
In standby, press and hold " " until you hear a "beep" and continue to hold while recording up to 30 seconds. Release the button when you hear a beep to finish recording. Your recorded message will play for review.
Play the recording
In standby, press " " to hear the recorded message.
Cancel recording
In standby, long press " " until you hear a "beep" sound and release immediately to cancel the recording.
Long press to record
( 5 ) Lock and unlock button
In standby, long press " " button, hear the long "beep" to lock the screen. Long press the " " button again and hear two "beeps" to unlock the screen.
Long press
(Unlocked/locked)
5
Important Notes
( 1 ) Cleaning and maintenance
Turn off the power and unplug the adapter before cleaning.
The food tray, food buckets, and lid can be removed for washing with a soft cloth.
Avoid submerging the main unit in water, simply clean with a damp cloth.
Warning Do not submerge the main unit in water as this will damage the electronic components and void the warranty.
Food bowl, stainless steel bowl, food bucket and lid can be washed in the sink.
( 2 ) FAQs
Battery indicator
Indicator permanently lit when no batteries are inserted.
Indicator flashing in intervals means low level battery.
Indicator flashing twice means batteries need replacing.
Warning: The main unit can not be submerged in water.
Abnormal conditions
The screen shows E-01: feeder is jammed and food outlet needs cleaning.
The screen shows E-02: the motor doesn’t work normally. Please check if the motor is running.
Automatic LED screen off
The screen will turn off automatically after 3 minutes without operating. The LED screen will light up but stay locked when you press any button. Long press " " to unlock the buttons.
Warning
Do not put your fingers into the food outlet or try to touch the rotor.
This product requires 3 D-type batteries.
Note:
Batteries should be removed from the device if it’s not used for an extended period of time to avoid damage through leakage.
This unit is made for dry food only.
In order to prevent food jams, the pellet size should not exceed 15mm.
If the device is powered by batteries only, the batteries will last up to 3 months under normal usage.
Batteries are not included in the package.
6