Advertisement
Advertisement
© LaView INDOOR SECURITY CAMERA USER MANUAL O LaView’ Status light Microphone SD card slot Speaker Reset Power DC 5V + 10% Status light + Red light solids оп: the device or network is abnormal * Blinking red light: awaiting WiFi connecting ° Blue light solids on: camera running correctly » Blinking blue light: currently connecting Microphone Capture sound for your video SD card slot Support local SD Card storage ( Max.128G ) Reset Press and hold the 'RESET' for 5 seconds with pin to reset the device(Camera will return to factory default settings) O) LaView’ / APP SET UP /h For step-by-step Mobile APP set up instruction, please read the Quick Start Guide included in the package or check out our Youtube tutorials © DOWNLOAD AND INSTALL APP LaView App is available for both iOS and Android OS. Search the name ‘LaView; in App Store or Google Play. ( The other LaView apps, such as LaView Connect, LaView ONE, LaView Life do NOT support R3 camera ) GET IT ON O) ” Google Play Lien App Store Please download the LaView App from the App Store or Scan the QR Code below O LaView’ Use the camera to scan the OR code on the phone ( keep the camera 6-8 inches away from the phone) 9 6-8 inches Press '| Heard a Prompt' after the camera receives the OR code and beeps. The camera will start pairing When connecting, you should make sure your router, mobile phone, and camera are as close as possible Wait until the camera is connected online Customize the camera name to differentiate cameras in different locations and finish and paring process If the pairing is not successful, press the Reset button for 5 seconds until you hear a beep and start again. Or check the FAQ section for more troubleshooting steps O) LaView PRODUCT WARRANTY CARD Your LaView product is protected by a 1-year warranty from the purchase date. For more information on repairs, exchange, and other policies, please visit www. laviewusa.com Please send all inquiries through the Contact Form on our website, or email us at [email protected]. And our technicians would be glad to assist you. O) LaView’ / CUSTOMER SERVICE /4 (=) LIVE CHAT: In LaView APP or on laviewusa.com хо ооо оо ооо ооо оо ооо ооо ооо ооо ооо оо ооо ооо ооо оо ооо Email: [email protected] Our professional techinicians are commited to reply all your requests within 24 hours If you purchased from Amazon, you can also contact our professional customer service team in your Amazon account O) LaView’ ° NIGHT VISION The camera is equipped with infrared LED technology to capture black and white night vision image in detail at night. However, the night vision image quality may be affected by the following factor. There are high contrast light sources such as car headlight pointing to the camera Daytime O LaView’ Check if WIFI password or router is changed. If so please reset the camera Ensure router in powered on and online Ensure camera has power Ensure the phone has decent network bandwidth Check the app is on latest version /h MOTION DETECTION у ° HOWTOTURN ON AND OFF MOTION DETECTION? To turn on or off motion detection setting, go to the camera menu and click on Detection Alarm Settings + WHATCAN | DO IF I CANNOT RECEIVE NOTIFICATIONS? Ensure your phone notification setting is enabled for LaView APP Ensure the phone has decent network bandwidth Ensure the camera is online O LaView’ CATALOGUE WHAT'S IN THE BOX APP SET UP INSTALLATION TROUBLESHOOTING MOTION DETECTION OTHERS FCC COMPLIANCE CUSTOMER SERVICE PARAMETER back cover PRODUCT WARRANTY CARD O) LaView’ ¥/ WHAT'S IN THE BOX /4 e PLEASE CONSULT THIS CHECKLIST FOR ALL PARTS. Power Adapter USB Cable YD fF L/ Adhesive tape Reset Button Pin 4 Bracket Screws a O) LaView’ © MAKE SURE YOUR PHONE IS CONNECTED TO A 2.4GHZ WIFI NETWORK © COMPLETE THE APP REGISTRATION PROCESS © FOLLOWTHE IN-APP INSTRUCTION TO PAIR THE CAMERA Click on the ‘+ sign to add the camera. Continue to click "Video Surveillance" >> "Smart Camera" Connect the camera to power via included power adapter and USB cable. (If you are not setting up the camera for the very first time, press the reset button instead for 5 seconds until you hear a beep.) SD card slot Reset \ | 7 Living Room Wait until the LED indicator is flashing red rapidly, which means the camera is ready for pairing. Enter the WiFi Password to generate a QR code that carries your WiFi information’ O) LaView’ y/ INSTALLATION /h + FIND A GOOD MOUNTING SPOT Use the WiFi Signal Indicator 3 in the APP live view screen to test the WiFi signal strength. Move the camera as close to the router as possible if the WiFi signal is poor O LaView’ y/ PARAMETER /h Camera Image sensor 1/2. 9" Processive Scan CMOS IR Distance Lens Day & night Angle Adjustment | Tilt:-10°~75°; Pan:0~355° | System Wireless Built-in 2.4G Wi-Fi Audio Built-in Omni-direction microphone Output Video 1~25fps adaptive frame rate of network Frame Rate transmission WDR DWDR Interface Cloud Storage Laview Cloud Storage Interface Local Storage Micro SD Card ( Max. 128G General AE. o of” _ o ‘a: O, 4°F ~ 131% (-20°C ~ 55°C ) humidity 90% or less (non-condensing) SV DC.1A | Power Consumption | Max.4.5W | Dimensions | 2.48"х 2.28'х 3.78'(63 x 58 x 96mm 0.34 lbs (1559) O) LaView’ »/ FCC COMPLIANCE /4 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1- this device may not cause harmful interference, 2- this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the игзег5 authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to. which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. RF warning statement: To maintain compliance with FCCs RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to. which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. RF waming statement: To maintain compliance with FCCs RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 an between the radiator and your body. O) LaView’ + WHAT CAN! DOIFI RECEIVE TOO MANY NOTIFICATIONS? If the camera is placed at location with heavy traffic, we recommend to relocate it to a place with less traffic to receive less alerts. + WHAT CAN! DO IF THE IMAGE IS NOT CLEAR? The camera is equipped with 1080p Full HD lens and sensor to produce superior image, however the image quality may be affected by the lighting condition Ensure the camera is NOT facing to environment with poor lighting condition or with extreme high contrast. Ensure it is NOT facing directly to bright lighting sources such as sun light. Ensure your phone and your router has enough bandwidth to stream HD video. A minimum of 2MBps is required to stream each 1080p camera. If the network does not meet this requirement, the live view stream will be downgraded to SD automatically O) LaView’ ¥/ TROUBLESHOOTING / ° IF YOU CANNOT CONNECT THE CAMERA TO THE INTERNET, CHECK THE FOLLOWING STEPS Ensure you are connecting to a 2.4GHz WIFI not 5GHz 2.4GHz 5GHz Y X Ensure WiFi password or SSID is correct Ensure the camera is placed as close to the router as possbile Ensure camera is powered on and the indicator is blinking rapidly before scanning the QR code Ensure you are using the correct APP ( LaView ) Ensure the camera is scanning the QR code on the phone in the correct way If the above steps doesn't help, reset the camera and start pairing again + WHAT CAN | DO IF THE CAMERA STOPPED WORKING? Close the APP and Restart the APP again ">

Public link updated
The public link to your chat has been updated.
Advertisement