Owner’s Manual & Safety Instructions
Save This Manual
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 21j
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright © 2021 by Harbor Freight Tools ® . All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Specifications
Total Combined Weight Capacity
(Evenly distributed from bottom up.)
280 lb
Page 2 For technical questions, please call 1-888-866-5797.
End Locker
IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Mount only on side of Bottom Cabinet according to instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
Use Precautions
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply to properly and completely assembled product only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting loaded Cabinet.
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
2. This product is not a toy nor a toy chest.
Do not allow children to play with or near this item.
4. Do not move or lift while loaded.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damaged.
3. Do not exceed weight capacities, evenly distributed from bottom up.
Be aware of dynamic loading!
Sudden load movement may briefly create excess load causing product failure.
7. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
End Locker For technical questions, please call 1-888-866-5797.
Page 3
Assembly and Mounting Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
Assembly
Note: Door can be attached to either side of Cabinet.
1. Attach Handle (1) to door with Handle Screws (2).
3. Install four Shelf Brackets (8) into vertical rails in Locker’s interior for each shelf. Install them so that the Shelf will rest level.
Handle
Shelf
Bracket
Vertical
Rail
Handle
Screws
2. Place Hanging Rod (11) into Hanging Rod Supports.
4. Place Shelves on Shelf Brackets.
Shelf Shelf Bracket
Hanging
Rod
Hanging
Rod Support
Mounting
1. Remove handle from side of Bottom Cabinet.
2. Using an assistant, place EMPTY End Cabinet onto either side of Bottom Cabinet, making sure lips on
End Cabinet fit securely over edge of Bottom Cabinet.
3. Secure End Cabinet to Bottom Cabinet from the inside, using Mounting Bolts (9).
Bottom
Cabinet
Lips
Bolts
Page 4
End
Cabinet
For technical questions, please call 1-888-866-5797.
End Locker
4. Secure End Cabinet to Bottom Cabinet from underneath, using Mounting Bolts (10).
5. Insert Plugs (12) into holes on other side of Cabinet.
Bolts
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
Fill End Cabinet evenly, from bottom to top. Do not exceed weight capacities.
Maintenance and Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If any part becomes damaged, have the problem corrected before further use.
1. PERIODICALLY, inspect the general condition of the Cabinet. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• any other condition that may affect its safe operation.
2. Wipe external surfaces of the
Cabinet with clean cloth.
3. Lubricate Drawer Slides as needed.
End Locker For technical questions, please call 1-888-866-5797.
Page 5
Parts List and Diagram
Parts List
Part
1 Handle
Description
2 Handle Screw
3 Drawer
4 Drawer Liner (not shown)
5 Drawer Label (not shown)
6 Fixed Shelf
7 Adjustable Shelf
Qty
1
1
1
2
1
1
2
Part Description
8 Shelf Bracket (not shown)
9 Mounting Bolt (M6x20)
10 Mounting Bolt (M8x16)
11 Hanging Rod
12 Plug (not shown)
13 Key (not shown)
Qty
8
2
2
1
2
3
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Parts may not be interchangeable.
Specify UPC number when ordering parts:
Red: 193175452290
Black: 193175470690
Blue: 193175470676
Page 6 For technical questions, please call 1-888-866-5797.
End Locker
Assembly Diagram
End Locker For technical questions, please call 1-888-866-5797.
Page 7
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
