Sony DCR-DVD710 Guide

3-285-366-11(1)
Digital Video Camera Recorder
Enjoying with Your
Camcorder
12
Getting Started
20
Recording/Playback 34
Operating Guide
DCR-DVD610/DVD710/
DVD810
Editing
50
Utilizing Media
66
Customizing Your
Camcorder
78
Performing with Your
Computer
97
US
Troubleshooting 101
Additional
114
Information
Quick
129
Reference
Spanish Quick Guide/
140
Guía rápida en español
Additional information on this product and answers
to frequently asked questions can be found at our
Customer Support Website.
http://www.sony.net/
Printed on 70% or more recycled paper
using VOC (Volatile Organic Compound)free vegetable oil based ink.
Printed in China
© 2008 Sony Corporation
DCR-DVD610/DVD710/DVD810
3-285-366-11(1)
DCR-DVD610/DVD710/DVD810
3-285-366-11(1)
IMPORTANT
SAFEGUARDS
WARNING
To reduce fire or shock hazard, do
not expose the unit to rain or
moisture.
For your protection, please read these safety
instructions completely before operating
the appliance, and keep this manual for
future reference.
Carefully observe all warnings, precautions
and instructions on the appliance, or the one
described in the operating instructions and
adhere to them.
Use
Power Sources
This symbol is intended to alert
the user to the presence of
uninsulated “dangerous
voltage” within the product’s
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
This symbol is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
This set should be operated only from the type of
power source indicated on the marking label. If
you are not sure of the type of electrical power
supplied to your home, consult your dealer or
local power company. For those sets designed to
operate from battery power, or other sources, refer
to the operating instructions.
Polarization
This set may be equipped with a polarized ac
power cord plug (a plug having one blade wider
than the other).
This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact
your electrician to have a suitable outlet installed.
Do not defeat the safety purpose of the polarized
plug by forcing it in.
Overloading
Do not overload wall outlets, extension cords or
convenience receptacles beyond their capacity,
since this can result in fire or electric shock.
Object and Liquid Entry
Never push objects of any kind into the set
through openings as they may touch dangerous
voltage points or short out parts that could result
in a fire or electric shock. Never spill liquid of any
kind on the set.
Attachments
Do not use attachments not recommended by the
manufacturer, as they may cause hazards.
2
Cleaning
Unplug the set from the wall outlet before
cleaning or polishing it. Do not use liquid cleaners
or aerosol cleaners. Use a cloth lightly dampened
with water for cleaning the exterior of the set.
Installation
Water and Moisture
Do not use power-line operated sets near water –
for example, near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool, etc.
Power-Cord Protection
Route the power cord so that it is not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to the
plugs, receptacles, and the point where the cord
exits from the appliance.
Accessories
Do not place the set on an unstable cart, stand,
tripod, bracket, or table. The set may fall, causing
serious injury to a child or an adult, and serious
damage to the set. Use only a cart, stand, tripod,
bracket, or table recommended by the
manufacturer.
Ventilation
The slots and openings in the cabinet are provided
for necessary ventilation. To ensure reliable
operation of the set, and to protect it from
overheating, these slots and openings must never
be blocked or covered.
– Never cover the slots and openings with a cloth
or other materials.
– Never block the slots and openings by placing
the set on a bed, sofa, rug, or other similar
surface.
– Never place the set in a confined space, such as
a bookcase, or built-in cabinet, unless proper
ventilation is provided.
– Do not place the set near or over a radiator or
heat register, or where it is exposed to direct
sunlight.
Lightning
outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to
lightning and power-line surges.
Service
Damage Requiring Service
Unplug the set from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
– When the power cord or plug is damaged or
frayed.
– If liquid has been spilled or objects have fallen
into the set.
– If the set has been exposed to rain or water.
– If the set has been subject to excessive shock by
being dropped, or the cabinet has been
damaged.
– If the set does not operate normally when
following the operating instructions. Adjust
only those controls that are specified in the
operating instructions. Improper adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the set to normal operation.
– When the set exhibits a distinct change in
performance – this indicates a need for service.
Servicing
Do not attempt to service the set yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
Replacement parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer that have the same
characteristics as the original parts.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
Safety Check
Upon completion of any service or repairs to the
set, ask the service technician to perform routine
safety checks (as specified by the manufacturer)
to determine that the set is in safe operating
condition.
For added protection for this set during a lightning
storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall
3
Read this before operating your camcorder
Before operating the unit, please read this
manual thoroughly, and retain it for future
reference.
WARNING
Do not expose the batteries to
excessive heat such as sunshine,
fire or the like.
CAUTION
The use of optical instruments with this product
will increase eye hazard. Use of controls or
adjustments or performance of procedures other
than those specified herein may result in
hazardous radiation exposure.
Replace the battery with the
specified type only. Otherwise, fire
or injury may result.
Owner’s Record
The model and serial numbers are located on the
bottom. Record the serial number in the space
provided below. Refer to these numbers whenever
you call upon your Sony dealer regarding this
product.
Model No. DCRSerial No.
Model No. ACSerial No.
For customers in the U.S.A. and
CANADA
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are
recyclable. You can help preserve
our environment by returning
your used rechargeable batteries
to the collection and recycling
location nearest you.
For more information regarding recycling of
rechargeable batteries, call toll free 1-800-8228837, or visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking
Lithium-Ion batteries.
4
For customers in the U.S.A.
If you have any questions about this product, you
may call:
Sony Customer Information Center
1-800-222-SONY (7669).
The number below is for the FCC related matters
only.
Regulatory Information
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-DVD610
Responsible Party:Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego, CA
92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-DVD710
Responsible Party:Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego, CA
92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-DVD810
Responsible Party:Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego, CA
92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
Note
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
The supplied interface cable must be used with the
equipment in order to comply with the limits for a
digital device pursuant to Subpart B of Part 15 of
FCC Rules.
Battery pack
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This Class B digital apparatus complies with
Canadian ICES-003.
For the State of California, USA only
Perchlorate Material - special handling may
apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains
perchlorate.
Notes on use
Your camcorder is supplied with two
kinds of operations guides.
– “Operating Guide” (This manual)
– “PMB Guide” for using your camcorder
with a computer connected (stored on the
supplied CD-ROM) (p. 97)
Types of the disc you can use in your
camcorder
You can use the following discs only.
– 8cm DVD-RW
– 8cm DVD+RW
– 8cm DVD-R
– 8cm DVD+R DL
Use the discs with marks listed below. See
page 13 for details.
For reliability and durability of recording/
playback, we recommend that you use Sony
Continued ,
5
Read this before operating your camcorder (Continued)
discs or discs with a
*(for VIDEO
CAMERA) mark for your camcorder.
* Depending on the place you purchase, the disc
has
mark.
b Note
• Using a disc other than the above may cause the
unsatisfactory recording/playback or you may
not be able to remove the disc from your
camcorder.
Types of “Memory Stick” you can use
in your camcorder
• Do not attach a label or the like on a
“Memory Stick PRO Duo” or a Memory
Stick Duo adaptor.
• When using a “Memory Stick PRO Duo”
with “Memory Stick” compatible
equipment, be sure to insert the “Memory
Stick PRO Duo” into the Memory Stick
Duo adaptor.
Using the camcorder
• Do not hold the camcorder by the
following parts.
• For recording movies, it is recommended
that you use a “Memory Stick PRO Duo”
of 512 MB or larger marked with:
–
(“Memory Stick
PRO Duo”)*
–
(“Memory Stick
PRO-HG Duo”)
* You can use a “Memory Stick PRO Duo”
marked either with “Mark2” or without.
Viewfinder
LCD screen
• See page 33 for the recordable time of a
“Memory Stick PRO Duo.”
“Memory Stick PRO Duo”/“Memory Stick
PRO-HG Duo”
(This size can be used with your
camcorder.)
“Memory Stick”
(You cannot use it in your camcorder.)
• “Memory Stick PRO Duo” and “Memory
Stick PRO-HG Duo” are both referred to
as “Memory Stick PRO Duo” in this
manual.
• You cannot use any type of memory card
other than those mentioned above.
• “Memory Stick PRO Duo” can be used
only with “Memory Stick PRO”
compatible equipment.
6
Battery
• The camcorder is not dustproofed,
dripproofed or waterproofed. See “About
handling of your camcorder” (p. 121).
• To prevent media from being broken or
recorded images from being lost, do not
do the following when either of the
(Movie)/
(Still) lamps (p. 25) or the
ACCESS/access lamps (p. 30, 32) are on:
– to remove the battery pack or AC
Adaptor from the camcorder
– to apply mechanical shock or vibration to
the camcorder
– to remove the “Memory Stick PRO Duo”
from the camcorder
• When connecting your camcorder to
another device with a cable, be sure to
insert the connector plug in the correct
way. Pushing the plug forcibly into the
terminal will damage the terminal and
may result in a malfunction of your
camcorder.
About menu items, LCD panel,
viewfinder, and lens
• A menu item that is grayed out is not
available under the current recording or
playback conditions.
• The LCD screen and the viewfinder are
manufactured using extremely highprecision technology, so over 99.99% of
the pixels are effective. However, there
may be some tiny black points and/or
bright points (white, red, blue, or green in
color) that appear constantly on the LCD
screen and the viewfinder. These points
are normal results of the manufacturing
process and do not affect the recording in
any way.
to a malfunction of the camcorder,
recording media, etc.
• TV color systems differ depending on the
countries/regions. To view your
recordings on a TV, you need an NTSC
system-based TV.
• Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the copyright laws.
• If you repeat recording/deleting images
for a long time, fragmentation of data
occurs on the internal memory (DCRDVD810) or a “Memory Stick PRO
Duo.” Images cannot be saved or
recorded. In such a case, save your images
on another type of media first (p. 55, 62),
and then format the media (p. 72).
About language setting
Black point
White, red, blue or
green point
• Exposing the LCD screen, the viewfinder,
or the lens to direct sunlight for long
periods of time may cause malfunctions.
• Do not aim at the sun. Doing so might
cause your camcorder to malfunction.
Take images of the sun only in low light
conditions, such as at dusk.
On recording
• Before starting to record, test the
recording function to make sure the image
and sound are recorded without any
problems.
– DCR-DVD610/DVD710
Use a DVD-RW/DVD+RW for trial
recording.
– DCR-DVD810
Make trial recording on the internal memory.
• Compensation for the contents of
recordings cannot be provided, even if
recording or playback is not possible due
The on-screen displays in each local
language are used for illustrating the
operating procedures. Change the screen
language before using your camcorder if
necessary (p. 26).
About disposal/transfer (DCRDVD810)
Even if you format the internal memory on
your camcorder (p. 72), data may not be
completely deleted from the internal
memory. When you give or sell your
camcorder to somebody, it is recommended
that you perform [ EMPTY] (p. 77) to
prevent the recovery of your data. In
addition to the above, when you dispose of
the camcorder, it is recommended that you
destroy the actual body of the camcorder.
About the Carl Zeiss lens
Your camcorder is equipped with a Carl
Zeiss lens, which was developed jointly by
Carl Zeiss, in Germany, and Sony
Corporation, and produces superior images.
It adopts the MTF measurement system for
video cameras and offers a quality typical
of a Carl Zeiss lens.
Continued ,
7
Read this before operating your camcorder (Continued)
MTF = Modulation Transfer Function. The
number value indicates the amount of light
from a subject coming into the lens.
About this manual
• The LCD screens and the viewfinder
images and indicators shown in this
manual were taken with a digital still
camera, and may look different from what
you actually see.
• Discs in this manual refers to 8cm DVD
discs.
• In this manual, the internal memory
(DCR-DVD810), a disc and a “Memory
Stick PRO Duo” are called the media.
• Unless otherwise specifically indicated,
illustrations in this manual are based on
DCR-DVD810.
• Design and specifications of media and
other accessories are subject to change
without notice.
About the marks used in this manual
• The operations available depend on the
media used. The following marks are
used to indicate the type of media you
can use for a particular operation.
Internal Memory
Disc
“Memory Stick PRO Duo”
8
Table of Contents
Read this before operating your
camcorder ..................................... 4
Table of Contents ........................... 9
Subject examples and solutions ... 11
Recording in dark places (NightShot
plus) .......................................... 41
Adjusting the exposure for backlit
subjects .................................... 41
Recording in mirror mode ........... 41
Playback .......................................43
Enjoying with Your Camcorder
Enjoy using various “Media”
according to your needs ............. 12
Media for your camcorder ............. 13
Using your camcorder .................. 15
“ HOME” and “ OPTION”
- Taking advantage of two types of
menus ......................................... 17
Getting Started
Step 1: Checking supplied items .. 20
Step 2: Charging the battery pack 21
Step 3: Turning the power on, and
setting the date and time ............ 25
Changing the language setting .. 26
Step 4: Making adjustments before
recording ..................................... 26
Step 5: Selecting media ................ 28
Step 6: Inserting a disc or a “Memory
Stick PRO Duo” .......................... 30
Recording/Playback
Recording and playing back with ease
(Easy Handycam operation) ....... 34
Recording ..................................... 38
Zooming ...................................... 40
Recording sound with more
presence (5.1ch surround
recording) (DCR-DVD710/
DVD810) ................................... 40
Starting to record quickly (QUICK
ON) ........................................... 41
Searching for scenes with pinpoint
accuracy (Film Roll Index) ........ 45
Searching for desired scenes by a
face (Face Index) ..................... 45
Searching for desired images by
date (Date Index) ...................... 46
Using PB zoom ........................... 46
Playing back a series of still images
(Slide show) .............................. 47
Playing the images on a TV ..........48
Editing
(OTHERS) category ................50
Deleting images ............................51
Capturing a still image from a movie
.....................................................53
Dubbing/copying images to media
within your camcorder .................55
Dividing movies .............................58
Creating the Playlist ......................59
Dubbing movies to VCR or DVD/HDD
recorders .....................................62
Printing still images (PictBridge
compliant printer) ........................64
Utilizing Media
(MANAGE MEDIA) category .66
Making the disc compatible with
playback on other devices
(Finalizing) ..................................67
Playing a disc on other devices ....70
Checking media information .........71
Formatting media ..........................72
Continued ,
9
Table of Contents (Continued)
Recording additional movies after
finalizing .................................... 74
Finding the right disc (DISC SELECT
GUIDE) ....................................... 75
Repairing the image database file
.................................................... 76
Preventing data on the internal
memory from being recovered
(DCR-DVD810) .......................... 77
Customizing Your Camcorder
What you can do with the
(SETTINGS) category of the
HOME MENU ........................ 78
Using the HOME MENU .............. 78
List of the
(SETTINGS) category
items ......................................... 79
MOVIE SETTINGS ....................... 80
(Items for recording movies)
PHOTO SETTINGS ..................... 82
(Items for recording still images)
VIEW IMAGES SET ..................... 84
(Items to customize the display)
SOUND/DISP SET ....................... 86
(Items to adjust sound and the screen)
OUTPUT SETTINGS ................... 87
(Items for when connecting other devices)
CLOCK/
LANG ......................... 88
(Items to set clock and language)
GENERAL SET ............................ 88
(Other setup items)
Activating functions using the
OPTION MENU ..................... 90
Using the OPTION MENU ........... 90
Recording items on the OPTION
MENU ....................................... 91
Viewing items on the OPTION
MENU ....................................... 91
Functions set in the
OPTION
MENU ......................................... 92
10
Performing with Your Computer
What you can do with Windows
computer ..................................... 97
Troubleshooting
Troubleshooting .......................... 101
Warning indicators and messages
................................................... 110
Additional Information
Using your camcorder abroad .... 114
File/folder structure on the internal
memory (DCR-DVD810) and a
“Memory Stick PRO Duo” ......... 116
Maintenance and precautions .... 117
About the disc ........................... 117
About the “Memory Stick” ......... 118
About the “InfoLITHIUM” battery
pack ........................................ 119
About handling of your camcorder
................................................. 121
Specifications ............................. 125
Quick Reference
Identifying parts and controls ..... 129
Indicators displayed during recording/
playback ................................... 133
Glossary ..................................... 135
Index ........................................... 136
Subject examples and solutions
Shooting
Flowers in close-up
B PORTRAIT ...................................... 94
B FOCUS............................................ 92
B TELE MACRO ................................. 92
Focusing on the
dog on the left side
of the screen
B FOCUS............................................ 92
B SPOT FOCUS.................................. 92
Getting a good shot
of a ski slope or
beach
B BACK LIGHT ................................... 41
B BEACH............................................ 94
B SNOW ............................................ 94
A child on the stage
under a spot light
B SPOTLIGHT.....................................94
Fireworks with all
its splendor
B FIREWORKS....................................93
B FOCUS ............................................92
A sleeping child
under dim light
B NightShot plus ................................41
B COLOR SLOW SHTR .......................95
Checking your golf
swing
B SPORTS ......................................... 94
11
Enjoying with Your Camcorder
Enjoy using various “Media” according to your
needs
Selecting media
You can select desired media for recording/playback/editing from the internal memory (DCRDVD810), a disc or a “Memory Stick PRO Duo” (p. 28). To set the media for movies or still
images, you can select either [MOVIE MEDIA SET] or [PHOTO MEDIA SET] (DCRDVD810) according to your needs.
Dubbing from one type of media to another
Using the [MOVIE DUB] function on the camcorder, you can dub movies recorded on the
internal memory (DCR-DVD810) or a “Memory Stick PRO Duo” to a disc without
connecting another device (p. 55).
b Notes
• You may not be able to dub movie contents depending on the type of your camcorder. For details on the
compatibility of types, see page 55.
12
Media for your camcorder
With your camcorder, you can record images on either the internal memory (DCR-DVD810),
an 8cm DVD-RW, DVD+RW, DVD-R or DVD+R DL disc, or a “Memory Stick PRO Duo.”
See page 6 for the types of “Memory Stick” you can use in your camcorder.
When you use a DVD-RW, you can choose the recording format from VIDEO mode or VR
mode.
In this manual, VIDEO mode is indicated as
and VR mode as
.
A recording format that is compatible with most DVD devices, especially after
finalizing.
In VIDEO mode, only the most recent movie can be deleted.
A recording format that enables editing with your camcorder (deleting and rearranging
the order of images).
A finalized disc can be played back in DVD devices that support VR mode.
Refer to the instruction manual of your DVD device to see whether it supports the VR
mode of DVD-RW.
VIDEO mode and VR mode
Enjoying with Your Camcorder
Recording format for DVD-RW
Glossary (p. 135)
Disc features
Figures in parentheses ( ) indicate reference pages.
DVD-RW
DVD+RW
DVD-R
DVD+R DL
Disc types and symbols
Symbols used in this manual
Both 16:9 (wide) and 4:3 movie can be recorded
on the same disc (30)
z
z
–
z
z
Deleting the most recent movie (52)
z
z
z
–
–
Deleting or editing movie on your camcorder (51)
–
z
–
–
–
Using a disc repeatedly by formatting, even if the
disc becomes full* (72)
z
z
z
–
–
z
z
–
z
Finalizing required to play on other devices (67)
z
z
*1–**
Making longer recordings on a side of a disc
–
–
–
* Formatting deletes all images and returns the recording media to its original empty state (p. 72). Even
when using a new disc, format it with your camcorder (p. 30).
** Finalizing is required to play the disc in a DVD drive on a computer. A DVD+RW that is not finalized
may cause the computer to malfunction.
Continued ,
13
Media for your camcorder (Continued)
Recording time of movies
Figures in the table are the approximate recording time in minutes using the internal memory
(DCR-DVD810) and on one side of a disc.
The recordable time on the acceptable media varies depending on media type and the [REC
MODE] (p. 80) setting.
Figures in ( ) are the minimum recording time.
Media type
*
9M (HQ) (high quality)
115 (100)
20 (18)
35 (32)
6M (SP) (standard quality)
170 (100)
30 (18)
55 (32)
3M (LP) (long play)
325 (215)
60 (44)
110 (80)
* DCR-DVD810
z Tips
•
•
•
•
Figures such as 9M and 6M in the table show the average bit rate. M stands for Mbps.
You can check the recordable time with [MEDIA INFO] (p. 71).
When you use a double-sided disc, you can record images on both sides (p. 117).
See page 33 for the recordable time on a “Memory Stick PRO Duo.”
Your camcorder uses the VBR (Variable Bit Rate) format to automatically adjust image quality to suit the
recording scene. This technology causes fluctuations in the recording time of media. Movies containing
quickly moving and complex images are recorded at a higher bit rate, and this reduces the overall recording
time.
14
Using your camcorder
1Selecting media (p. 28)
You can select media separately for movies and still images.
In the case of recording on a disc, select the disc that best suits your needs.
Yes
No
Do you want to delete images and reuse
the disc?
Yes
No
Enjoying with Your Camcorder
Do you want to delete or edit images on your
camcorder?
For long recording
* Select the recording format and format the disc on your camcorder (p. 30).
zTips
• You can select the disc from [DISC SELECT GUIDE] (p. 75).
2Recording images (p. 38)
3Editing/Saving images
The available functions depend on the selected media.
x Dubbing/copying images to another type of media within your camcorder (p. 55)
x Dubbing movies to other devices (p. 62)
x Editing on a computer (p. 97)
Using the supplied application software “Picture Motion Browser,” you can import
images to a computer, and save them on a disc.
Continued ,
15
Using your camcorder (Continued)
4Viewing on other devices
x Viewing images on a TV (p. 48)
You can view the images recorded and edited on your camcorder on the connected TV.
x Playing the disc on other devices (p. 70)
To play a disc recorded on your camcorder on other devices, you need to finalize the
disc first.
bNotes
• The less the recording volume of the disc is, the more it takes time to finalize the disc.
The features of a finalized disc depend on disc type.
Like commercially sold DVD,
this disc can be played back in
most DVD devices after
finalizing.
Recordings cannot be added
even if there is free space left.
Unfinalizing allows you to add
movies (p. 74).
The disc can be played back in
a device compatible with the
DVD-RW VR mode.
Movies can be added without
unfinalizing.
The disc can be played back without finalizing.
But finalizing is required in some cases.
For details, see page 67.
Playback compatibility
Playback compatibility with all DVD devices is not guaranteed. Refer to the instruction manual
supplied with your DVD device or consult your dealer.
16
“
HOME” and “
OPTION”
- Taking advantage of two types of menus
“ HOME MENU” - the starting point for operations with your
camcorder
Category
Enjoying with Your Camcorder
(HELP)
Displays a description of the item (p. 18)
B Categories and items of the HOME MENU
(CAMERA) category
(MANAGE MEDIA) category
Items
Page
Items
Page
MOVIE*1
39
MOVIE MEDIA SET*1
28
PHOTO*1
39
PHOTO MEDIA SET*1*3
28
FINALIZE*1
67
(VIEW IMAGES) category
MEDIA INFO
71
Items
Page
MEDIA FORMAT*1
72
VISUAL INDEX*1
43
UNFINALIZE
74
INDEX*1
45
DISC SELECT GUIDE
75
INDEX*1
45
REPAIR IMG.DB F.
76
PLAYLIST
59
(OTHERS) category
Items
Page
2
51
PHOTO CAPTURE*3
53
MOVIE DUB*3
55
PHOTO COPY*3
56
DELETE*
(SETTINGS) category*1
To customize your camcorder (p. 78).
EDIT
58
PLAYLIST EDIT
59
PRINT
64
USB CONNECT
97
*1 You can also set these items during Easy
Handycam operation (p. 34). For items
available in the
(SETTINGS) category,
see page 79.
*2 The item is available during Easy Handycam
operation (p. 34) when you select [INT.
MEMORY] (DCR-DVD810) or [MEMORY
STICK] on [MOVIE MEDIA SET] (p. 28).
*3 You may not be able to use this item depending
on your camcorder model.
Continued ,
17
“ HOME” and “
(Continued)
OPTION” - Taking advantage of two types of menus
Using the HOME MENU
1 While pressing the green button,
4 Touch the desired item.
Example: [EDIT]
turn the POWER switch in the
direction of the arrow to turn on
your camcorder.
5 Follow the guide on the screen for
further operation.
To hide the HOME MENU screen
2 Press
Touch
(HOME) A (or B).
(HOME) A
.
When you want to know something
about the function of each item on the
HOME MENU - HELP
1 Press
(HOME).
The HOME MENU appears.
(HOME) B
3 Touch the desired category.
Example:
18
(OTHERS) category
2 Touch
(HELP).
The bottom of
(HELP) turns orange.
3 Touch the item you want to know
the content.
To apply the option, touch [YES],
otherwise, touch [NO].
Enjoying with Your Camcorder
When you touch an item, its explanation
appears on the screen.
To deactivate the HELP
Touch
(HELP) again in step 2.
Using the OPTION MENU
Just a touch on the screen during shooting
or playback displays the functions available
at that moment. You will find it easy to
make various settings. See page 90 for
further details.
(OPTION)
19
Getting Started
Step 1: Checking supplied items
Make sure that you have the following
items supplied with your camcorder.
The number in the parentheses indicates the
number of that item supplied.
Rechargeable battery pack NP-FH40 (1)
(p. 21)
AC Adaptor (1) (p. 21)
CD-ROM “Handycam Application
Software” (1) (p. 97)
– Picture Motion Browser (Software)
– PMB Guide
Power cord (mains lead) (1) (p. 21)
A/V connecting cable (1) (p. 48, 62)
USB cable (1) (p. 64)
Wireless Remote Commander (DCRDVD710/DVD810) (1) (p. 132)
A button-type lithium battery is already installed.
20
Operating Guide (This manual) (1)
Step 2: Charging the battery pack
POWER switch
DC IN jack
Getting Started
Battery
CHG (charge) lamp
Jack cover
To the wall outlet
(wall socket)
AC Adaptor
DC plug
You can charge the “InfoLITHIUM”
battery pack (H series) (p. 119) after
attaching it to your camcorder.
b Notes
• Your camcorder operates only with
“InfoLITHIUM” battery pack (H series).
1 Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
2 Attach the battery pack by sliding
Power cord (mains lead)
Match the v mark on the DC plug with
the v mark on your camcorder.
4 Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
The CHG (charge) lamp lights up and
charging starts.
5 The CHG (charge) lamp turns off
when the battery is fully charged.
Disconnect the AC Adaptor from
the DC IN jack.
it in the direction of the arrow
until it clicks.
b Notes
3 Connect the AC Adaptor to the
DC IN jack of your camcorder.
• Disconnect the AC Adaptor from the DC IN
jack holding both the camcorder and the DC
plug.
Open the jack cover, and connect the
DC plug of the AC Adaptor.
Continued ,
21
Step 2: Charging the battery pack (Continued)
To remove the battery pack
Remaining battery (approx.)
1 Turn the POWER switch to OFF
(CHG).
2 Slide the BATT (battery) release lever
(1) and remove the battery pack (2).
Recording capacity (approx.)
BATT (battery)
release lever
b Notes
• When you remove the battery pack or the AC
Adaptor, make sure that the
(Movie) lamp/
(Still) lamp (p. 25)/ACCESS lamp (p. 30)/
access lamp (p. 32) are turned off.
• When you store the battery pack, fully discharge
the battery before storing it for an extended
period (p. 119).
To use a power source from a wall
outlet (wall socket)
Make the same connections as you do when
charging the battery pack. The battery pack
will not lose its charge in this case.
To check the remaining battery
(Battery Info)
Set the POWER switch to OFF (CHG), then
press DISP/BATT INFO.
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Battery pack
125
NP-FH50
135
NP-FH70
170
NP-FH100
390
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
When recording on the internal
memory (DCR-DVD810) or a
“Memory Stick PRO Duo”
DCR-DVD610
Battery pack
After a while, the approximate recordable
time and battery information appear for
about 7 seconds. You can view the battery
information for up to 20 seconds by
pressing DISP/BATT INFO again while the
information is displayed.
22
Charging time
NP-FH40
(supplied)
Continuous
recording
time
Typical
recording
time*
NP-FH40
(supplied)
110
120
50
55
NP-FH50
130
60
140
65
NP-FH70
280
130
300
140
NP-FH100
625
300
680
325
DCR-DVD710/DVD810
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH40
(supplied)
95
45
110
50
NP-FH50
110
50
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
b Notes
130
60
NP-FH70
235
110
280
130
Playing time
NP-FH100
535
255
625
300
Approximate time (min.) available when
you use a fully charged battery pack.
When playing the internal memory
(DCR-DVD810) or a “Memory Stick
PRO Duo”
When recording on a disc
DCR-DVD610
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH40
(supplied)
100
45
NP-FH50
110
45
120
50
NP-FH70
NP-FH100
95
235
40
105
255
110
535
240
580
260
DCR-DVD610
Battery pack
Battery pack
LCD panel
opened*
LCD panel
closed
NP-FH40
(supplied)
150
170
NP-FH50
170
195
NP-FH70
370
415
NP-FH100
830
925
DCR-DVD710/DVD810
Battery pack
DCR-DVD710/DVD810
Continuous
recording
time
Getting Started
• See page 28 for selecting the media.
• All times measured with recording mode [SP]
under the following conditions:
Top: When the LCD backlight turns on.
Bottom: When recording with the viewfinder
while the LCD panel is closed.
LCD panel
opened*
LCD panel
closed
NP-FH40
(supplied)
140
170
NP-FH50
165
195
35
NP-FH70
350
415
NP-FH100
785
925
Typical
recording
time*
NP-FH40
(supplied)
80
95
40
NP-FH50
95
40
110
45
NP-FH70
205
90
235
105
NP-FH100
470
210
535
240
Continued ,
23
Step 2: Charging the battery pack (Continued)
When playing a disc
• We do not recommend using an NP-FH30,
which only allows short recording and playback
times, with your camcorder.
DCR-DVD610
Battery pack
LCD panel
opened*
LCD panel
closed
NP-FH40
(supplied)
120
135
NP-FH50
140
155
NP-FH70
300
330
NP-FH100
680
745
DCR-DVD710/DVD810
Battery pack
LCD panel
opened*
LCD panel
closed
NP-FH40
(supplied)
115
135
NP-FH50
135
155
NP-FH70
290
330
NP-FH100
650
745
* When the LCD backlight is on.
b Notes
• See page 28 for selecting the media.
On the battery pack
• Before changing the battery pack, turn the
POWER switch to OFF (CHG) and turn off the
(Movie) lamp/
(Still) lamp (p. 25)/
ACCESS lamp (p. 30)/access lamp (p. 32).
• The CHG (charge) lamp flashes during
charging, or Battery Info (p. 22) will not be
correctly displayed under the following
conditions:
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out (for Battery Info
only).
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the
power cord (mains lead) is disconnected from
the wall outlet (wall socket).
• When attaching an optional video light, it is
recommended that you use an NP-FH70/NPFH100 battery pack (DCR-DVD710/DVD810).
24
On the charging/recording/playback time
• Times measured when using the camcorder at
25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is
recommended).
• The available recording and playback time will
be shorter when you use your camcorder in low
temperatures.
• The available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
On the AC Adaptor
• Use the nearby wall outlet (wall socket) when
using the AC Adaptor. Disconnect the AC
Adaptor from the wall outlet (wall socket)
immediately if any malfunction occurs while
using your camcorder.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
• Even if your camcorder is turned off, AC power
source (mains) is still supplied to it while
connected to the wall outlet (wall socket) via the
AC Adaptor.
Step 3: Turning the power on, and setting the
date and time
Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, the [CLOCK SET]
screen appears every time you turn on your
camcorder or change the POWER switch
position.
Touch the button on the LCD screen.
3 Select the desired geographical
area with
[NEXT].
/
, then touch
4 Set [DST SET] or [SUMMERTIME],
then touch [NEXT].
POWER switch
6 Select [M] with
the month with
1 While pressing the green button,
turn the POWER switch
repeatedly in the direction of the
arrow until the respective lamp
lights up.
(Movie): To record movies
(Still): To record still images
Go to step 3 when you turn on your
camcorder for the first time.
2 Touch
(HOME) t
(SETTINGS) t [CLOCK/
LANG] t [CLOCK SET].
The [CLOCK SET] screen appears.
/
/
/
Getting Started
5 Set [Y] (year) with
.
, then set
.
7 Set [D] (day), hour and minute in
the same way, then touch [NEXT].
8 Make sure that the clock is
correctly set, then touch
.
The clock starts.
You can set any year up to the year
2037.
For midnight, set it to 12:00 AM.
For midday, set it to 12:00 PM.
To turn off the power
Turn the POWER switch to OFF (CHG).
Continued ,
25
Step 3: Turning the power on, and
setting the date and time (Continued)
b Notes
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the built-in rechargeable battery and then
set the date and time again (p. 124).
• It takes a few seconds for your camcorder to be
ready to shoot after the power is turned on. You
cannot operate your camcorder during this time.
• In the default setting, the power turns off
automatically if you leave your camcorder
unoperated for approximately 5 minutes, to save
battery power ([A.SHUT OFF], p. 89).
Step 4: Making
adjustments before
recording
Opening the lens cover
Slide the LENS COVER switch to OPEN.
z Tips
• The date and time does not appear during
recording, but they are automatically recorded
on the media, and can be displayed during
playback ([DATA CODE], p. 84).
• See page 115 for information concerning
“World time difference.”
• If the buttons on the touch panel do not work
correctly, adjust the touch panel
([CALIBRATION], p. 122).
After recording, set the LENS COVER
switch to CLOSE to close the lens cover.
Adjusting the LCD panel
Open the LCD panel 90 degrees to the
camcorder (1), then rotate it to the best
angle to record or play (2).
Changing the language setting
You can change the on-screen displays to
show messages in a specified language.
(SETTINGS)
Touch
(HOME) t
t [CLOCK/
LANG] t
[ LANGUAGE SET], then select the
desired language.
190 degrees to the
camcorder
290 degrees
(max.)
2180 degrees
(max.)
DISP/BATT INFO
To turn off the LCD backlight to make
the battery last longer
(DCR-DVD710/DVD810)
Press and hold DISP/BATT INFO for a few
seconds until
appears.
This setting is practical when you use your
camcorder in bright conditions or you want
26
to save battery power. The recorded image
will not be affected by the setting. To turn
on the LCD backlight, press and hold DISP/
BATT INFO for a few seconds until
disappears.
z Tips
• You can adjust the brightness of the viewfinder
backlight by touching
(HOME)
t
(SETTINGS) t [SOUND/DISP SET]
t [VF B.LIGHT] (p. 86).
Fastening the grip belt
b Notes
z Tips
• If you open the LCD panel 90 degrees to the
camcorder, then rotate it 180 degrees to the lens
side, you can close the LCD panel with the LCD
screen facing out. This is convenient during
playback operations.
• Touch
(HOME) t
(SETTINGS) t
[SOUND/DISP SET] t [LCD BRIGHT]
(p. 86), and adjust the brightness of the LCD
screen.
• The information is displayed or hidden (display
y no display) each time you press DISP
BATT/INFO.
Adjust and fasten the grip belt as illustrated,
and hold your camcorder properly.
Getting Started
• Do not press the buttons on the LCD frame
accidentally when you open or adjust the LCD
panel.
Adjusting the viewfinder
You can view images using the viewfinder
to avoid wearing down the battery, or when
the image seen on the LCD screen is poor.
Pull out and look into the viewfinder.
Adjust the viewfinder to your eyesight.
Viewfinder
Viewfinder lens
adjustment lever
Move it until the
image becomes clear.
27
Step 5: Selecting media
You can set the media to be used for movies and still images separately.
For movies, you can select the internal memory*, a disc, or a “Memory Stick PRO Duo.” For
still images, you can select the internal memory*, or a “Memory Stick PRO Duo.”
DCR-DVD610/DVD710
In the default setting, movies are recorded on a disc. Still images are recorded on a “Memory
Stick PRO Duo” only.
DCR-DVD810
In the default setting, both movies and still images are recorded on the internal memory.
*
Internal memory
Disc
Movie
Still image
“Memory Stick PRO Duo”
* DCR-DVD810
b Notes
• You can record, play back, or edit images on the selected media. When you record, play back, or edit
images on other media, select media again.
Selecting media for movies
4 When [Completed.] appears,
touch
1 Touch
(HOME) t
(MANAGE MEDIA) t [MOVIE
MEDIA SET].
The movie media setting screen
appears.
2 Touch the desired media.
3 Touch [YES].
28
.
The movie media is changed.
Selecting media for still images
(DCR-DVD810)
1 Touch
(HOME) t
(MANAGE MEDIA) t [PHOTO
MEDIA SET].
To confirm the selected media
1 Slide the POWER switch to turn on the
lamp of the mode (
(Movie)/
(Still)) that you want to check the
media.
2 Confirm the media icon displayed at the
upper right corner of the screen.
2 Touch the desired media.
b Notes
• You cannot select a disc for the still image
media.
3 Touch [YES].
Media icon
Getting Started
The still image media setting screen
appears.
Internal memory*
Disc (The icon differs
depending on the disc type
(p. 13).)
“Memory Stick PRO Duo”
* DCR-DVD810
4 When [Completed.] appears,
touch
.
The still image media is changed.
29
Step 6: Inserting a disc or a “Memory Stick PRO
Duo”
When you select [INT. MEMORY] in
“Step 5,” this “Step 6” operation is
unnecessary (DCR-DVD810).
Inserting a disc
3 Set the disc with the recording
side facing your camcorder, then
press the center of the disc until it
clicks.
When you select [DISC] in “Step 5,” a new
8 cm DVD-RW, DVD+RW, DVD-R, or
DVD+R DL is required (p. 13).
b Notes
• Remove dust or fingerprints from the disc
beforehand, using a soft cloth (p. 118).
1 Check that the power of your
camcorder is on.
2 Slide the disc cover OPEN switch
Set the disc with the label side facing out when
using a single-sided disc.
in the direction of the arrow
(OPEN l).
[PREPARING TO OPEN] appears on
the screen. The disc cover slightly opens
automatically.
ACCESS lamp (Disc)
Disc cover OPEN
switch
Pickup lens
4 Close the disc cover.
[DISC ACCESS] appears on the screen.
It may take some time for the camcorder
to recognize the disc.
x DVD-RW/DVD+RW
A screen appears to ask whether you
will use [DISC SELECT GUIDE].
Using [DISC SELECT GUIDE] lets you
format the disc by following the
guidance on the screen. If you do not
want to use it, proceed to step 5.
x DVD-R/DVD+R DL
You can start recording immediately
after [DISC ACCESS] disappears from
the screen. You do not need to proceed
to steps after step 5.
When the disc cover opens slightly, open it
further.
30
5 Touch the option that is right for
you on the screen.
x DVD-RW
Select the recording format, [VIDEO]
.
or [VR] (p. 13), then touch
Select the aspect ratio of the movie,
.
[16:9 WIDE] or [4:3], then touch
6 Touch [YES].
7 When [Completed.] is displayed,
touch
.
When the formatting is completed, you
can start recording on the disc.
z Tips
• When you use a DVD-RW while the Easy
Handycam operation (p. 34) is set, the
recording format is fixed to VIDEO
mode.
• Be careful not to obstruct the operation with
your hand or other objects, when opening or
closing the disc cover. Move the grip belt to the
bottom of the camcorder, then open or close the
disc cover.
• If you catch the grip belt when closing the disc
cover, it may cause your camcorder to
malfunction.
• Do not touch the disc with the recording side or
pickup lens (p. 123).
When using a double-sided disc, take care not to
smudge the surface with fingerprints.
• If you close the disc cover with the disc set
incorrectly, it may cause your camcorder to
malfunction.
• Do not disconnect the power sources while
formatting a disc.
• Do not apply shock or vibration to your
camcorder since your camcorder is reading/
writing on the disc:
– while the ACCESS lamp is on
– while the ACCESS lamp is flashing
– while [DISC ACCESS] or [PREPARING TO
OPEN] is displayed on the LCD screen
• It may take some time to remove the disc
depending on the recorded contents.
• It may take about 10 minutes to remove a disc if
the disc has scratches or is dirty with
fingerprints, etc. In that case, the disc might be
damaged.
To remove the disc
z Tips
1 Perform steps 1 and 2 to open the disc
cover.
2 Press the disc holder in the center of the
disc compartment, and remove the disc by
holding the edge.
• You can insert or remove the disc when a power
source is connected to your camcorder even
when your camcorder is turned off. However,
the disc recognition process (step 4) does not
start.
• To delete all of the previously recorded images
from a DVD-RW/DVD+RW, then to use it
again to record new images, see “Formatting
media” (p. 72).
• You can check the right disc using [DISC
SELECT GUIDE] on the HOME MENU
(p. 75).
Continued ,
Getting Started
x DVD+RW
b Notes
31
Step 6: Inserting a disc or a “Memory Stick PRO Duo” (Continued)
Inserting a “Memory Stick PRO
Duo”
This operation is necessary only when you
select [MEMORY STICK] in “Step 5.”
See page 6 on the “Memory Stick” you can
use with your camcorder.
z Tips
• If you record only still images on the “Memory
Stick PRO Duo,” operations after step 3 are
unnecessary.
3 If you select [MEMORY STICK] in
“Step 5” for movie recording,
slide the POWER switch
repeatedly until the
(Movie)
lamp lights up.
If the POWER switch is set to OFF
(CHG), turn it on while pressing the
green button.
1 Open the LCD panel.
2 Insert the “Memory Stick PRO
Duo.”
1 Open the Memory Stick Duo cover in
the direction of the arrow.
2 Insert the “Memory Stick PRO Duo”
into the Memory Stick Duo slot in the
right direction until it clicks.
3 Close the Memory Stick Duo cover.
The [Create a new Image Database
File.] screen appears on the screen when
you insert a new “Memory Stick PRO
Duo.”
4 Touch [YES].
Access lamp
Face the b mark towards the
LCD screen.
32
To remove the “Memory Stick PRO
Duo”
Open the LCD panel and Memory Stick
Duo cover. Lightly push the “Memory Stick
PRO Duo” in once, then slide it out of the
slot.
b Notes
• Numbers in the table are of when using a
“Memory Stick PRO Duo” made by Sony
Corporation. The recordable time varies
depending on the recording conditions, the type
of “Memory Stick,” or the [REC MODE] setting
(p. 80).
• When the recordable time is less than 5 minutes,
appears.
z Tips
• See page 83 for the recordable numbers of still
images.
Getting Started
• To prevent media from being broken or
recorded images from being lost, do not do the
following when the access lamp ( p. 32) is on:
– to remove the battery pack or AC Adaptor
from the camcorder
– to apply mechanical shock or vibration to the
camcorder
– to remove the “Memory Stick PRO Duo”
from the camcorder
• Do not open the Memory Stick Duo cover
during recording.
• Inserting a “Memory Stick PRO Duo” forcibly
in the wrong direction may cause a malfunction
to the “Memory Stick PRO Duo,” Memory
Stick Duo slot, or image data.
• If [Failed to create a new Image Database File.
It may be possible that there is not enough free
space.] is displayed in step 4, format the
“Memory Stick PRO Duo” (p. 72). All recorded
data on the “Memory Stick PRO Duo” will be
deleted when you format.
• Do not pinch and remove the “Memory Stick
PRO Duo” forcibly. It may cause a malfunction.
b Notes
Recording time of movies on a
“Memory Stick PRO Duo”
Figures in the table are approximate
recording time in minutes of “Memory
Stick PRO Duo.”
Figures in ( ) are minimum recording time.
Recording
mode
512MB
1GB
2GB
4GB
8GB
9M (HQ)
(high
quality)
6 (5)
10 (10)
25 (25)
55 (50)
115 (100)
6M (SP)
3M (LP)
(standard
(long play)
quality)
9 (5)
15 (10)
20 (10)
35 (25)
40 (25)
80 (50)
80 (50)
160 (105)
170 (100) 325 (215)
33
Recording/Playback
Recording and playing back with ease (Easy
Handycam operation)
Easy Handycam operation makes nearly all settings automatic so that you can perform
recording or playing back operation without detailed settings. It also makes the screen font
size larger for easy viewing. The images are recorded on the selected media (p. 28).
If the POWER switch
is set to OFF (CHG),
turn it while pressing
the green button.
R
Movies
Still Images
1 Turn the POWER switch
1 Turn the POWER switch
G until the
(Movie)
lamp lights up.
2 Press EASY A.
,
G until the
(Still)
lamp lights up.
2 Press EASY A.
appears on the
screen.
3 Press START/STOP H (or E) to
,
appears on the
screen.
3 Press PHOTO F lightly to adjust
start recording*.
the focus A (a beep sounds), then
press it fully B (a shutter click
sounds).
[STBY] t [REC]
To stop recording, press START/STOP
again.
* Movies are recorded in the [SP] recording mode.
34
Flashing t Lights up
Playing back recorded movies/still images
1 Turn the POWER switch G to turn on your camcorder.
2 Press
(VIEW IMAGES) I (or D).
The VISUAL INDEX screen appears on the screen. (It may take some time to display the
thumbnails.)
Film Roll Index (p. 45)
Face Index (p. 45)
Previous 6 images
Appears with the image on
each of the tab that was lastly
played back/recorded (B for
the still image recorded on
“Memory Stick PRO Duo”).
Next 6 images
Returns to the recording
screen.
Displays movies.
Recording/Playback
Searches for images by
recording date (p. 46).*
Displays still images.
* When you select [DISC] on [MOVIE MEDIA SET] (p. 28), a disc type appears. You cannot search
for movies by recording date.
3 Start playback.
Movies:
Touch the
tab and the movie to be played back.
Returns to the VISUAL
INDEX screen.
Beginning of the scene/
previous scene
Stop (goes to the
VISUAL INDEX screen.)
Toggles Play or Pause as
you touch.
Next scene
Recording date/time*
Reverse/Forward
* The setting of [DATA CODE] is fixed to [DATE/TIME] (p. 84).
Continued ,
35
Recording and playing back with ease (Easy Handycam operation)
(Continued)
zTips
• When playback from the selected movie reaches the last movie, the screen returns to the VISUAL
INDEX screen.
• You can slow down the playback speed by touching
/
during pause.
• You can adjust the volume by touching
(HOME) t
(SETTINGS) t [SOUND
SETTINGS] t [VOLUME], then with
/
.
• You can change the movie media with [MOVIE MEDIA SET] (p. 28).
Still images:
Touch the
tab and the still image to be played back.
Returns to the VISUAL
INDEX screen.
Side show (p. 47)
Recording date/time*
Goes to the VISUAL
INDEX screen.
Previous/Next
* The setting of [DATA CODE] is fixed to [DATE/TIME] (p. 84).
zTips
• You can switch the still image media with [PHOTO MEDIA SET] (DCR-DVD810) (p. 28).
36
To cancel Easy Handycam operation
Press EASY A again.
from the screen.
disappears
Menu settings during Easy Handycam
operation
Touch
(HOME) C (or B) to display
the menu items available for setup changes
(p.17, 78).
b Notes
Invalid buttons during Easy Handycam
operation
Recording/Playback
• Most of the menu items automatically return to
the default settings. The settings of some menu
items are fixed. For details, see page 79.
• DVD-RW is formatted with VIDEO mode (p.
13).
• You cannot use the
(OPTION) menu.
• Cancel Easy Handycam operation if you want to
add effects to images or change settings.
You cannot use some buttons/functions
during Easy Handycam operation since
they are automatically set (p. 79). If you set
an invalid operation, [Invalid during Easy
Handycam operation] appears.
To view movies on a disc on other
devices (Finalize)
To view movies stored on a disc on other
devices or a computer, you need to
“finalize” the disc. For details on finalizing
operation, see page 67.
b Notes
• For DVD-R, DVD+R DL, you cannot reuse the
disc or record additional movies onto the disc
once you finalize the disc even if the disc has
free space.
• You cannot record additional movies on a
finalized disc during Easy Handycam operation
(p. 74).
37
Recording
The images are recorded on the media selected on the media setting (p. 28).
DCR-DVD610/DVD710
In the default setting, movies are recorded on a disc. Still images are recorded on a “Memory
Stick PRO Duo” only.
DCR-DVD810
In the default setting, both movies and still images are recorded on the internal memory.
Open the lens cover
(p. 26).
PHOTO F
START/STOP B
(HOME) E
(HOME) D
POWER switch A
If the POWER switch is
set to OFF (CHG), turn it
while pressing the green
button.
(Movie) lamp
START/STOP C
(Still) lamp
b Notes
• If the ACCESS/access lamps (p. 30, 32) are lit or flashing after recording is finished, it means data is still
being written onto the media. Do not apply shock or vibration to your camcorder, and do not remove the
battery pack or the AC Adaptor.
• In the case that [INT. MEMORY] (DCR-DVD810) or [MEMORY STICK] is selected on [MOVIE
MEDIA SET] (p. 28), when a movie file exceeds 2 GB, the next movie file is created automatically.
z Tips
• See page 6 for the “Memory Stick PRO Duo” you can use in your camcorder.
• You can check the free media space for movies by touching
(HOME) t
t [MEDIA INFO] (p. 71).
38
(MANAGE MEDIA)
Movies
Still Images
1 Turn the POWER switch A until
the
(Movie) lamp lights up.
2 Press START/STOP B (or C).
1 Turn the POWER switch A until
the
(Still) lamp lights up.
2 Press PHOTO F lightly to adjust
the focus A (a beep sounds), then
press it fully B (a shutter click
sounds).
To stop recording, press START/STOP
again.
Flashing t Lights up
Recording/Playback
[STBY] t [REC]
appears next to
or
. When
disappears, the image has been
recorded.
b Notes
• You cannot record still images on a disc.
z Tips
• See page 14 for the recordable time of movies, and page 83 for the number of recordable still images.
•
appears when [ INDEX SET] is set to [ON] (the default setting) during movie recording (p. 82).
• You can switch recording between movies and still images by touching
(HOME) D (or E) t
(CAMERA) t [MOVIE] or [PHOTO].
• You can create still images from recorded movies (p. 53).
Continued ,
39
Recording (Continued)
Zooming
You can zoom in up to the magnifications
shown in the following table.
(optical zoom)
DCR-DVD610
40 ×
DCR-DVD710/DVD810
25 ×
You can adjust the magnification with the
power zoom lever or the zoom button on
the LCD frame.
focus is about 1 cm (about 13/32 in.) for wide
angle and about 80 cm (about 2 5/8 feet) for
telephoto.
z Tips
• Using [DIGITAL ZOOM] (p. 81), you can
zoom in further than the magnification shown in
the table when recording movies.
Recording sound with more
presence (5.1ch surround
recording) (DCR-DVD710/
DVD810)
Sound picked up by the built-in microphone
is converted to 5.1ch surround sound and
recorded.
Enjoy realistic sound when playing the
movies on devices that support 5.1ch
surround sound.
Built-in microphone
Wider range of view:
(Wide angle)
Close view: (Telephoto)
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
b Notes
• [STEADYSHOT] may not reduce image
blurring as desired when the power zoom lever
is set to the T (Telephoto) side.
• Be sure to keep your finger on the power zoom
lever. If you move your finger off the power
zoom lever, the operation sound of the lever
may also be recorded.
• You cannot change the zoom speed with the
zoom buttons on the LCD frame.
• The minimum possible distance between
camcorder and subject while maintaining sharp
40
Dolby Digital 5.1 Creator, 5.1ch surround sound
Glossary (p. 135)
b Notes
• 5.1ch sound is converted to 2ch when played back
on your camcorder.
z Tips
• You can select the recording sound, [5.1ch
SURROUND] or [2ch STEREO] ([AUDIO
MODE], p. 80).
Starting to record quickly
(QUICK ON)
To record in dark places, set the
NIGHTSHOT PLUS switch to ON to
display
.
b Notes
QUICK ON
lamp
b Notes
• While the camcorder is in sleep mode, the
power consumption will be about half that used
during recording. You can save the battery
power.
• If you do not operate your camcorder and leave
it in sleep mode for a while, your camcorder
automatically turns off. With [QUICK ON
STBY], you can set the time after which the
camcorder turns off in sleep mode (p. 89).
• If you press QUICK ON during recording, your
camcorder stops recording and becomes sleep
mode.
Recording in dark places
(NightShot plus)
z Tips
• To record an image brighter, use Super
NightShot plus function (p. 95). To record a
movie more faithfully to the original colors, use
Color Slow Shutter function (p. 95).
Recording/Playback
If you press QUICK ON instead of turning
off the POWER switch, the power
consumption will be reduced (sleep mode).
In sleep mode, the QUICK ON lamp
flashes. If you press QUICK ON again
when you want to start next recording, your
camcorder will be ready for recording after
about 1 second.
• The NightShot plus and Super NightShot plus
functions use infrared light. Therefore, do not
cover the infrared port with your fingers or other
objects.
• Remove the conversion lens (optional).
• Adjust the focus manually ([FOCUS], p. 92)
when it is hard to focus automatically.
• Do not use the NightShot plus and Super
NightShot plus functions in bright places. This
may cause a malfunction.
Adjusting the exposure for
backlit subjects
To adjust the exposure for backlit subjects,
press . (BACK LIGHT) to display .. To
cancel the back light function, press
. (BACK LIGHT) again.
Recording in mirror mode
Infrared port
Continued ,
41
Recording (Continued)
Open the LCD panel 90 degrees to the
camcorder (1), then rotate it 180 degrees
to the lens side (2).
z Tips
• A mirror-image of the subject appears on the
LCD screen, but the image will be normal when
recorded.
• When recording in mirror mode, the images are
not displayed in the viewfinder.
42
Playback
You can play back images recorded on the media selected in the media setting (p. 28).
DCR-DVD610/DVD710
In the default setting, movies on a disc are played. Still images are recorded and played on a
“Memory Stick PRO Duo” only.
DCR-DVD810
In the default setting, images in the internal memory are played.
Power zoom lever F
POWER switch A
Recording/Playback
(HOME) D
(HOME) E
(VIEW IMAGES) B
(VIEW IMAGES) C
1 Turn the POWER switch A to turn on your camcorder.
2 Press
(VIEW IMAGES) B (or C).
The VISUAL INDEX screen appears on the screen. (It may take some time to display the
thumbnails.)
Film Roll Index (p. 45)
Face Index (p. 45)
Searches for images by
recording date (p. 46).*
Previous 6 images
Appears with the image on
each of the tab that was lastly
played back/recorded (B for
the still image recorded on
“Memory Stick PRO Duo”).
Next 6 images
Returns to the recording
screen.
Displays movies.
(OPTION)
Displays still images.
* When you select [DISC] on [MOVIE MEDIA SET] (p. 28), a disc type appears. You cannot
search for movies by recording date.
Continued ,
43
Playback (Continued)
z Tips
• The number of the images on the VISUAL INDEX screen can be changed 6 y 12 by moving the power
zoom lever F. To fix this number, touch
(HOME) D (or E) t
(SETTINGS) t [VIEW
IMAGES SET] t [
DISPLAY] (p. 85).
3 Start playback.
Movies
Touch the
tab and the movie to be played back.
When playback from the selected movie reaches the last movie, the screen returns to the
VISUAL INDEX screen.
Returns to the VISUAL
INDEX screen.
Beginning of the movie/
previous movie
Stop (goes to the VISUAL
INDEX screen.)
Toggles Play or Pause as
you touch.
Next movie
(OPTION)
Reverse/ Forward
z Tips
• Touch
/
during pause to play back movie slowly.
• When playing movies from the internal memory (DCR-DVD810) or from a “Memory Stick PRO Duo,”
one touch of
/
makes the movie reverse/fast forward about 5 times faster than normal, 2
touches about 10 times, 3 touches about 30 times, and 4 touches about 60 times faster.
• When playing the movies on a disc, one touch of
/
makes the movie reverse/fast forward
about 5 times faster than normal, 2 touches about 10 times faster (about 8 times faster for a DVD+RW).
Still Images
Touch the
tab and the still image to be played back.
Returns to the VISUAL
INDEX screen.
Slide show (p. 47)
Goes to the VISUAL
INDEX screen.
(OPTION)
Previous/Next
44
To adjust the sound volume of movies
While playing back movies, touch
(OPTION) t
tab t [VOLUME],
then adjust the volume with
/
.
4 Touch
/
to search for the
desired scene.
Playback starts from the selected scene.
z Tips
• You can switch screen to the VISUAL INDEX
screen by touching
(HOME) D (or E) t
(VIEW IMAGES) t [VISUAL INDEX].
Movies can be divided by a set time, and
the first scene of each division is displayed
on the INDEX screen. You can start playing
back a movie from the selected scene.
Select beforehand media which contains the
movie you want to play back (p. 28).
1 Press
(VIEW IMAGES) on your
camcorder.
The VISUAL INDEX screen appears.
• You can display the Film Roll Index screen by
touching
(HOME) t
(VIEW
IMAGES) t [ INDEX].
Searching for desired scenes by
a face (Face Index)
The detected face images during recording
are displayed on the INDEX screen.
You can play back the movie from the
selected face image.
Select beforehand media which contains the
movie you want to play back (p. 28).
Recording/Playback
Searching for scenes with
pinpoint accuracy (Film Roll
Index)
z Tips
1 Press
(VIEW IMAGES) on your
camcorder.
The VISUAL INDEX screen appears.
2 Touch
(Film Roll Index).
Previous/Next movie
Previous scene
2 Touch
(Face Index).
Previous/Next movie
Next scene
Previous/Next face image
Changes the interval of scenes.
3 Touch
3 Touch
/
to select the desired
/
to select the desired
movie.
movie.
Continued ,
45
Playback (Continued)
4 Touch
/
to search for the
desired face image, then select
the face image of the scene you
want to play back.
Playback starts from the selected scene.
2 To search for movies, touch the
tab. To search for still
images, touch the
tab.
3 Touch the date button at the
upper right corner of the screen.
b Notes
• Faces may not be detected depending on
recording conditions.
Example: People wearing glasses or hats, or not
facing towards the camera.
• Set [ INDEX SET] to [ON] (the default
setting) before recording to play back movies
from [ INDEX] (p. 82). Face Index may not
appear properly if no face was detected.
z Tips
• You can display the Face Index screen by
touching
(HOME) t
(VIEW
IMAGES) t [ INDEX].
Searching for desired images by
date (Date Index)
You can efficiently search for desired
images by date.
Select beforehand media which contains the
movie you want to play back (p. 28).
b Notes
• You cannot use the Date Index with the disc,
and still images on the “Memory Stick PRO
Duo.”
1 Press
(VIEW IMAGES) on your
camcorder.
The VISUAL INDEX screen appears.
46
The recording dates of images are
displayed on the screen.
Previous/Next date
4 Touch
/
to select the
recording date of the desired
images, then touch
.
The images recorded on the selected
date are displayed on the screen.
z Tips
• On the Film Roll Index screen or the Face Index
screen, you can display the Date Index function
by following the steps 3 to 4.
Using PB zoom
You can magnify still images from about
1.1 to 5 times the original size.
Magnification can be adjusted with the
power zoom lever or the zoom buttons on
the LCD frame.
b Notes
• You cannot operate playback zoom during slide
show.
z Tips
1 Play back the still image you want to
magnify.
3 Touch the screen at the point you want
to display in the center of the displayed
frame.
4 Adjust the magnification with W (Wide
angle)/T (Telephoto).
To cancel, touch
Recording/Playback
2 Magnify the still image with T
(Telephoto).
The screen is framed.
• You can also play back the slide show by
touching
(OPTION) t
tab t [SLIDE
SHOW] on the VISUAL INDEX screen.
• While playing back still images, you can set
continuous slide show playback by touching
(OPTION) t
tab t [SLIDE SHOW
SET]. As the default setting is [ON],
is
displayed on the LCD screen and your
camcorder repeats a slide show of still images.
If you set [SLIDE SHOW SET] to [OFF], your
camcorder plays the still images in slide show
mode once, starting from the selected still
image.
.
Playing back a series of still
images (Slide show)
Touch
on the still image playback
screen.
The slide show begins from the selected
still image.
Touch
to stop the slide show. To
restart, touch
again.
47
Playing the images on a TV
Connect your camcorder to the input jack of a TV or VCR using the A/V connecting cable 1
or an A/V connecting cable with S VIDEO 2. Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this operation (p. 21). Refer also to the instruction
manuals supplied with the devices to be connected.
Device without
S VIDEO jack
Device with
S VIDEO jack
IN
IN
S VIDEO
VIDEO
VIDEO
(Yellow)
(White)
(White)
A/V Remote
Connector
(Red)
: Signal flow
1 A/V connecting cable (supplied)
Connect to the input jack of the other device.
2 A/V connecting cable with S VIDEO
(optional)
When connecting to the other device via the S
VIDEO jack, by using an A/V connecting cable
with S VIDEO (optional), higher quality
images can be produced than with an A/V
connecting cable. Connect the white and red
plugs (left/right audio) and the S VIDEO plug
(S VIDEO channel) of the A/V connecting
cable with S VIDEO (optional). The yellow
plug connection is not necessary. Connecting
only the S VIDEO plug will not output audio.
48
AUDIO
AUDIO
(Red)
VCRs or TVs
When your TV is connected to a VCR
Connect your camcorder to the LINE IN
input on the VCR. Set the input selector on
the VCR to LINE (VIDEO 1, VIDEO 2, etc.),
if the VCR has an input selector.
To set the aspect ratio according to
the connected TV (16:9/4:3)
Change the setting according to the screen
aspect ratio of the TV you will view images
on.
1 Turn on your camcorder.
2 Touch
(HOME) t
(SETTINGS)
t [OUTPUT SETTINGS] t [TV TYPE]
t [16:9] or [4:3] t
.
b Notes
• When you connect your camcorder to a TV
compatible with the ID-1/ID-2 system, set [TV
TYPE] to [16:9]. The TV switches to full mode
automatically. Refer also to the instruction
manuals supplied with your TV.
• When you set [TV TYPE] to [4:3], the image
quality may deteriorate. Also, when the recorded
image’s aspect ratio switches between 16:9
(wide) and 4:3, the image may jitter.
• When you play back an image recorded in 16:9
(wide) aspect ratio on a 4:3 TV not compatible
with the 16:9 (wide) signal, set [TV TYPE] to
[4:3].
Recording/Playback
When your TV is monaural (When your
TV has only one audio input jack)
Connect the yellow plug of the A/V
connecting cable to the video input jack and
connect the white (left channel) or the red
(right channel) plug to the audio input jack
of your TV or VCR.
z Tips
• You can display the counter on the TV screen by
setting [DISP OUTPUT] to [V-OUT/PANEL]
(p. 87).
49
Editing
(OTHERS) category
This category enables you to edit or print
images on the media, or copy them onto
your computer for viewing, editing or
creating an original DVD.
PLAYLIST EDIT
You can create and edit a Playlist (p. 59).
PRINT
You can print still images on a connected
PictBridge printer (p. 64).
USB CONNECT
(OTHERS) category
b Notes
• You can select the media of the image to be
edited by touching
(HOME) t
(MANAGE MEDIA) t [MOVIE
MEDIA SET]/[PHOTO MEDIA SET] (p. 28).
Item list
DELETE
You can delete images on the media (p. 51).
PHOTO CAPTURE
You can capture a selected scene from a
recorded movie as a still image (p. 53).
MOVIE DUB
You can dub movies recorded on the
internal memory (DCR-DVD810) or a
“Memory Stick PRO Duo” to a disc (p. 55).
PHOTO COPY (DCR-DVD810)
You can copy still images recorded on the
internal memory to a “Memory Stick PRO
Duo” (p. 56).
EDIT
You can edit the images on the media
(p. 58).
50
You can connect your camcorder to a
computer or another device using the USB
cable (p. 97).
Deleting images
b Notes
5 Touch
• You cannot restore images once they are
deleted.
z Tips
t [YES].
6 When [Completed.] appears,
• You can select up to 100 images at one time.
touch
.
Deleting movies
To delete all movies at one time
Select beforehand the media which contains
the movie you want to delete (p. 28).
1 In step 3, touch [
b Notes
2 Touch [YES] t [YES].
• When you select [DISC] on [MOVIE MEDIA
SET] (p. 28), you cannot delete movies during
Easy Handycam operation (p. 34). Cancel Easy
Handycam operation first.
3 When [Completed.] appears, touch
DELETE ALL].
To delete all the movies recorded on
the same day at one time
Editing
.
1 Touch
(HOME) t
(OTHERS) t [DELETE].
2 Touch [
DELETE].
3 Touch [
DELETE].
1 In step 3, touch [
DELETE by date].
Previous/Next date
4 Touch the movie to be deleted.
2 Touch
/
to select the recording
date of the desired movies, then touch
.
The movies recorded on the selected
date are displayed on the screen.
Touch the movie on the screen to
confirm.
.
Touch
screen.
Press and hold the movie on the screen
to confirm.
3 Touch
The selected movie is marked with
Touch
screen.
to return to the previous
to return to the previous
t [YES].
4 When [Completed.] appears, touch
.
Continued ,
51
Deleting images (Continued)
To delete the most recently recorded
movie
1 Touch
1 In step 3, touch [
DEL].
2 Touch [
DELETE].
3 Touch [
DELETE].
2 Touch
(HOME) t
(OTHERS) t [DELETE].
LAST SCENE
t [YES].
3 When [Completed.] appears, touch
.
You cannot delete the most recently
recorded movie:
– if you remove the disc from your
camcorder after recording.
– if you turn off your camcorder after
recording.
4 Touch the still image to be
deleted.
b Notes
• Do not remove the battery pack or the AC
Adaptor from your camcorder while deleting
movies.
• Do not remove the “Memory Stick PRO Duo”
while deleting movies from the “Memory Stick
PRO Duo.”
• If the deleted movie is included in a Playlist
(p. 59), the movie is deleted also from the
Playlist.
• You cannot delete movies from the “Memory
Stick PRO Duo” if the movies are protected by
another device.
• Even if you delete unnecessary movies from the
disc, the remaining disc capacity may not
increase as much as you can make additional
recording.
z Tips
• To delete all images recorded on the media and
recover all the recordable space of the media,
format the media (p. 72).
• You can delete a movie when viewing it by
touching
(OPTION).
The selected still image is marked with
.
Press and hold the still image on the
screen to confirm.
Touch
screen.
to return to the previous
5 Touch
t [YES].
6 When [Completed.] appears,
touch
.
To delete all still images at one time
Deleting still images
1 In step 3, touch [
DELETE ALL].
2 Touch [YES] t [YES].
Select beforehand the media which contains
the still image you want to delete (p. 28).
52
3 When [Completed.] appears, touch
.
Capturing a still
image from a movie
To delete all the still images recorded
on the same day at one time
1 In step 3, touch [
You can capture a still image at any point
during movie playback.
Select the media which contains the movies
beforehand, and the media where you want
to save the still images (p. 28).
When you select [MEMORY STICK] to
save the still images, insert a “Memory
Stick PRO Duo” beforehand.
The media you can select depends on your
camcorder model. See the table below.
DELETE by date].
Model
Previous/Next date
t
DCRDVD810
t
3 Touch
t
t
t
t
Touch the still image on the screen to
confirm.
Touch
screen.
Still images in
Editing
2 Touch
/
to select the recording
date of the desired still images, then
touch
.
The still images recorded on the
selected date are displayed on the
screen.
Movies in
DCRDVD610/
DVD710
t
to return to the previous
t
t [YES].
b Notes
b Notes
• Using the AC Adaptor as the power source is
recommended to prevent the power from being
turned off during operation.
• You cannot delete still images from the
“Memory Stick PRO Duo” if the still images are
protected by another device.
1 Touch
4 When [Completed.] appears, touch
.
z Tips
• To delete all images recorded in the internal
memory (DCR-DVD810) or a “Memory Stick
PRO Duo,” and recover all the recordable space
of the media, format the media (p. 72).
• You can delete a still image when viewing it by
touching
(OPTION).
(HOME) t
(OTHERS) t [PHOTO
CAPTURE].
The [PHOTO CAPTURE] screen
appears.
Continued ,
53
Capturing a still image from a movie (Continued)
2 Touch the movie that you want to
play back and capture an image
from.
The selected movie is played back.
3 Touch
to pause at the point
where you want to capture.
The movie pauses.
Play and pause toggles as you press
.
Adjusts the capturing point with more
precision after the capturing point has
been selected with
.
Returns to the beginning of the
selected movie.
4 Touch
.
appears while the still image is
captured and stored on the media you
selected.
To capture another still image, touch
and repeat from step 2.
To finish the operation, touch
.
54
t
b Notes
• The media where you want to save still images
has to have enough free space.
• Recording date and time of created still images
are the same as the recording date and time of
the movies.
• If the movies do not have data code, recording
date and time of still images are saved as the
time you create them from the movies.
Dubbing/copying images to media within your
camcorder
The [MOVIE DUB] screen appears.
Dubbing movies
You can dub movies from the internal
memory (DCR-DVD810)
or a “Memory Stick PRO Duo” to a disc.
Insert a disc in your camcorder beforehand.
The media you can select depends on your
camcorder model. See the table below.
Model
DCRDVD610/
DVD710
DCRDVD810
From
To
t
2 DCR-DVD810:
Touch media which contains the
movie to be dubbed.
t
Editing
t
b Notes
• Using the AC Adaptor as the power source is
recommended to prevent the power from being
turned off during operation.
z Tips
• To check dubbed movies on the disc, select
[DISC] on [MOVIE MEDIA SET] (p. 28).
1 Touch
(HOME) t
(OTHERS) t [MOVIE DUB].
Or, press DUBBING on your
camcorder (DCR-DVD810).
DCR-DVD610/DVD710:
Step 2 is unnecessary. Go to step 3.
3 Touch [DUB by select].
4 Touch the movie to be dubbed.
Remaining disc space*
* x: Used
x (green): To be used to save the selected
movie
s: Free space
The selected movie is marked with
.
Press and hold the movie on the screen
to confirm.
Touch
screen.
to return to the previous
Continued ,
55
Dubbing/copying images to media within your camcorder (Continued)
If the disc space is not sufficient to
record the entire movie, [Not enough
memory space.] appears.
5 Touch
2 Touch [YES].
3 When [Completed.] appears, touch
To back up movies that have not been
backed up yet
t [YES].
1 In step 3, touch [BACKUP].
2 Touch [Backs up unbacked up movies.]
t [YES].
6 When [Completed.] appears,
touch
.
.
To dub all the movies recorded on the
same day at one time
3 When [Completed.] appears, touch
.
If the disc space is not sufficient to
record the entire movie, [Disc is full.]
appears, and the number of one-sided
discs required will be displayed. Prepare
discs, and repeat from step 1.
1 In step 3, touch [DUB by date].
b Notes
• If movies are backed up on 2 or more discs, the
movie recorded at the end of each disc is
divided automatically to fit in the full disc
capacity.
z Tips
• In step 3, by touching [BACKUP] t [Backup
starts from the first movie. Previous backup
history will be deleted.], you can back up all
movies, including movies that have been backed
up previously. Your camcorder will keep a
backup history of movies only when they are
saved with the [BACKUP] function.
Previous/Next date
2 Touch
/
to select the recording
date of the desired movies, then touch
.
The movies recorded on the selected
date are displayed on the screen.
Copying still images (DCRDVD810)
Touch the movie on the screen to
confirm.
Touch
screen.
to return to the previous
You can copy still images from the internal
memory to a “Memory Stick PRO Duo.”
3 Touch
t [YES].
If the disc space is not sufficient to
record the entire movie, [Not enough
memory space.] appears.
4 When [Completed.] appears, touch
To dub all movies in a Playlist (p. 59)
1 In step 3, touch [ DUB ALL].
If the disc space is not sufficient to
record the entire movie, [Not enough
memory space.] appears.
56
From
To
t
.
Insert a “Memory Stick PRO Duo” into
your camcorder beforehand.
b Notes
• Using the AC Adaptor as the power source is
recommended to prevent the power from being
turned off during operation.
z Tips
• To check the copied still images, select
[MEMORY STICK] on [PHOTO MEDIA SET]
(p. 28).
To copy all the still images recorded
on the same day at one time
1 In step 2, touch [COPY by date].
1 Touch
(HOME) t
(OTHERS) t [PHOTO COPY].
The [PHOTO COPY] screen appears.
Previous/Next date
3 Touch the still image to be
copied.
Editing
2 Touch [COPY by select].
2 Touch
/
to select the recording
date of the desired still images, then
touch
.
The still images recorded on the
selected date are displayed on the
screen.
Touch the still image on the screen to
confirm.
Touch
screen.
3 Touch
to return to the previous
t [YES].
4 When [Completed.] appears, touch
.
The selected still image is marked with
.
Press and hold the still image on the
screen to confirm.
Touch
screen.
to return to the previous
4 Touch
t [YES].
5 When [Completed.] appears,
touch
.
57
Dividing movies
b Notes
Select beforehand the media which contains
the movie you want to divide (p. 28).
1 Touch
(HOME) t
(OTHERS) t [EDIT].
2 Touch [DIVIDE].
3 Touch the movie that you want to
divide.
The selected movie is played back.
z Tips
4 Touch
at the point where
you want to divide.
The movie pauses.
Play and pause toggles as you press
.
Adjusts the dividing point with more
precision after the dividing point has
been selected with
.
Returns to the beginning of the
selected movie.
5 Touch
t [YES].
6 When [Completed.] appears,
touch
58
• You cannot restore movies once they are
divided.
• Do not remove the battery pack or the AC
Adaptor from your camcorder while dividing
movies.
• Do not remove the “Memory Stick PRO Duo”
while dividing movies in the “Memory Stick
PRO Duo.”
• When you select [INT. MEMORY] (DCRDVD810) or [MEMORY STICK] on [MOVIE
MEDIA SET] (p. 28), and the divided original
movie is included in a Playlist, the movie in the
Playlist will also be divided. When you select
[DISC] on [MOVIE MEDIA SET] (p. 28), the
movie in a Playlist is not divided.
• A slight difference may occur from the point
where you touch
and the actual dividing
point, as your camcorder selects the dividing
point based on about half-second increments.
.
• You can divide a movie when viewing it by
touching
(OPTION).
• The images recorded on your camcorder are
called “original.”
Creating the Playlist
4 Touch
A Playlist is a list showing thumbnails of
the movies that you have selected. The
original scenes are not changed even
though you edit or delete the movies in the
Playlist.
Select beforehand the media to use to
create, play, or edit a Playlist (p. 28).
t [YES].
5 When [Completed.] appears,
touch
.
To add all the movies to the Playlist
z Tips
1 In step 2, touch [
3 When [Completed.] appears, touch
.
To add all the movies recorded on the
same day at one time
1 Touch
(HOME) t
(OTHERS) t [PLAYLIST
EDIT].
1 In step 2, touch [
2 Touch [
ADD ALL].
2 Touch [YES] t [YES].
Editing
• To a Playlist, you can add a maximum of 99
movies on the internal memory (DCR-DVD810)
or a “Memory Stick PRO Duo,” or 999 movies
on a disc.
• The images recorded on your camcorder are
called “original.”
ADD by date].
ADD].
3 Touch the movie to be added to
the Playlist.
Previous/Next date
.
2 Touch
/
to select the recording
date of the desired movies, then touch
.
The movies recorded on the selected
date are displayed on the screen.
The selected movie is marked with
.
Press and hold the movie on the screen
to confirm.
Touch
screen.
to return to the previous
Touch the movie on the screen to
confirm.
Touch
screen.
3 Touch
to return to the previous
t [YES].
4 When [Completed.] appears, touch
.
Continued ,
59
Creating the Playlist (Continued)
b Notes
• Do not remove the battery pack or the AC
Adaptor from your camcorder while adding the
movies.
• Do not remove the “Memory Stick PRO Duo”
while adding movies in the “Memory Stick PRO
Duo.”
• You cannot add still images to a Playlist.
z Tips
• You can add a movie when viewing it by
touching
(OPTION).
• You can copy the Playlist to a disc as it is, by
using the supplied software.
Playing the Playlist
To erase unnecessary movies from
the Playlist
1 Touch
(HOME) t
t [PLAYLIST EDIT].
(OTHERS)
2 Touch [ ERASE].
To erase all the movies from the
Playlist, touch [ ERASE ALL] t
[YES] t [YES]. Then, when
[Completed.] appears, touch
.
3 Touch the movie to be erased from the
Playlist.
Select beforehand the media to use to
create, play or edit a Playlist (p. 28).
The selected movie is marked with
1 Touch
(HOME) t
(VIEW
IMAGES) t [PLAYLIST].
The movies in the Playlist screen
appear.
.
Press and hold the movie on the screen
to confirm.
Touch
screen.
4 Touch
to return to the previous
t [YES].
5 When [Completed.] appears, touch
z Tips
• The original movies are not erased even if you
erase movies from the Playlist.
2 Touch the movie from which you
want to play back.
The Playlist is played back from the
selected movie to the end, then the
screen returns to the Playlist screen.
60
.
To change the order within the Playlist
To divide a movie in the Playlist
1 Touch
(HOME) t
t [PLAYLIST EDIT].
1 Touch
(HOME) t
t [PLAYLIST EDIT].
2 Touch [
(OTHERS)
MOVE].
(OTHERS)
2 Touch [DIVIDE].
3 Select the movie that you want to move.
3 Touch the movie that you want to
divide.
The selected movie is played back.
4 Touch
at the point where you
want to divide.
The movie pauses.
Play and pause toggles as you press
.
.
Press and hold the movie on the screen
to confirm.
Touch
screen.
4 Touch
Editing
The selected movie is marked with
Adjusts the dividing point with more
precision after the dividing point has
been selected with
.
to return to the previous
.
5 Select the destination with
/
.
Returns to the beginning of the
selected movie.
5 Touch
Destination bar
t [YES].
6 When [Completed.] appears, touch
6 Touch
t [YES].
7 When [Completed.] appears, touch
z Tips
• When you select multiple movies, the movies
are moved following the order appeared in the
Playlist.
.
.
b Notes
• A slight difference may occur from the point
where you touch
and the actual dividing
point, as your camcorder selects the dividing
point based on about half-second increments.
z Tips
• The original movies are not divided even if you
divide the movie in the Playlist.
61
Dubbing movies to VCR or DVD/HDD recorders
Connecting a device with the A/V connecting cable
You can dub movies played back on your camcorder to other recording devices, such as VCRs
or DVD/HDD recorders. Connect the device in either of the following ways.
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for
this operation (p. 21). Refer also to the instruction manuals supplied with the devices to be
connected.
b Notes
• Since dubbing is performed via analog data transfer, the image quality may deteriorate.
Device without
S VIDEO jack
Device with
S VIDEO jack
IN
IN
S VIDEO
VIDEO
VIDEO
(Yellow)
(White)
(White)
A/V Remote
Connector
(Red)
: Video/Signal flow
A A/V connecting cable (supplied)
Connect to the input jack of the other
device.
B A/V connecting cable with S
VIDEO (optional)
When connecting to the other device via
the S VIDEO jack, by using an A/V
connecting cable with S VIDEO
(optional), higher quality movies can be
produced than with an A/V connecting
62
AUDIO
AUDIO
(Red)
VCRs or DVD/HDD recorders
cable. Connect the white and red plugs
(left/right audio) and the S VIDEO plug
(S VIDEO channel) of the A/V
connecting cable with S VIDEO
(optional). The yellow plug connection
is not necessary. Connecting only the S
VIDEO plug will not output audio.
b Notes
• To hide the screen indicators, such as a counter
on the screen of the monitor device connected,
touch
(HOME) t
(SETTINGS) t
[OUTPUT SETTINGS] t [DISP OUTPUT]
t [LCD PANEL] (the default setting) (p. 87).
• To record the date/time and camera settings
data, display them on the screen (p. 84).
• When you are connecting your camcorder to a
monaural device, connect the yellow plug of the
A/V connecting cable to the video input jack,
and the red (right channel) or the white (left
channel) plug to the audio input jack on the
device.
1 Turn on your camcorder.
the movie you want to dub (p. 28).
3 Press
(VIEW IMAGES).
Set [TV TYPE] according to the display
device (p. 48).
7 When dubbing is finished, stop
the recording device, and then
your camcorder.
Connecting a device with the
USB cable
By connecting a DVD writer, etc. that is
capable of movie dubbing via USB
connection to your camcorder, you can dub
movies without the declination of their
image quality.
Connect your camcorder to the wall outlet
(wall socket) using the supplied AC
Adaptor for this operation (p. 22). Refer
also to the instruction manuals supplied
with the devices to be connected.
Editing
2 Select the media which contains
Refer to the instruction manuals
supplied with your recording device for
details.
4 Insert the recording media in the
recording device.
If your recording device has an input
selector, set it to the input mode.
5 Connect your camcorder to the
recording device (VCR or DVD/
HDD recorder) with the A/V
connecting cable (supplied) 1 or
an A/V connecting cable with S
VIDEO (optional) 2.
Connect your camcorder to the input
jacks of the recording device.
1 Turn on your camcorder.
6 Start playback on your
camcorder, and record it on the
recording device.
Continued ,
63
Dubbing movies to VCR or DVD/
HDD recorders (Continued)
2 Connect the
(USB) jack of your
camcorder to a DVD writer, etc.
using the supplied USB cable (p.
129).
The [USB SELECT] screen appears on
the screen.
3 Touch media which contains the
movie to be dubbed.
4 Start recording on the connected
Printing still images
(PictBridge compliant
printer)
You can print out still images using a
PictBridge compliant printer, without
connecting the camcorder to a computer.
Connect your camcorder to the AC Adaptor
to obtain power from the wall outlet (wall
socket) (p. 21).
Select beforehand the media which contains
the still image you want to print (p. 28).
Also, turn on the printer.
To print still images on a “Memory Stick
PRO Duo,” insert the “Memory Stick PRO
Duo” containing them into your camcorder.
1 Turn on your camcorder.
device.
Refer to the instruction manuals
supplied with the connected device for
details.
5 When dubbing is finished, touch
[END] t [YES] and disconnect
the USB cable.
2 Connect the
(USB) jack of your
camcorder to the printer using
the supplied USB cable (p. 129).
The [USB SELECT] screen appears on
the screen.
3 Touch [PRINT].
When connection is complete,
(PictBridge connecting) appears on the
screen.
64
4 Touch the still image to be
printed.
To finish printing
On the INDEX screen of still images, touch
.
b Notes
The selected still image is marked with
.
Press and hold the still image on the
screen to confirm.
to return to the previous
5 Touch
(OPTION), set the
following options, then touch
.
[COPIES]: Set number of copies of a
still image to be printed. You can set up
to 20 copies.
[DATE/TIME]: Select [DATE],
[DAY&TIME], or [OFF] (no date/time
printed).
[SIZE]: Select the paper size.
If you do not change the setting, go to
step 6.
6 Touch [EXEC] t [YES].
Editing
Touch
screen.
• We can guarantee the operation of only models
that are PictBridge compatible.
• Refer also to the instruction manual of the
printer to be used.
• Do not attempt the following operations when
is on the screen. The operations may not be
performed properly.
– To operate the POWER switch
– To press
(VIEW IMAGES)
– To disconnect the USB cable from your
camcorder or the printer
– To remove the “Memory Stick PRO Duo”
from your camcorder
• If the printer stops working, disconnect the USB
cable, turn the printer off and on again, and
restart the operation from the beginning.
• You can select only the paper sizes that the
printer can print.
• On some printer models, the top, bottom, right,
and left edges of still images may be trimmed. If
you print a still image recorded in a 16:9 (wide)
ratio, the left and right ends of the image may be
trimmed widely.
• Some printer models may not support the date
printing function. Refer to your printer’s
instruction manual for details.
• You may not be able to print the following:
– still images edited by a computer
– still images recorded by other devices
– still images of 4MB or more
– still images with a pixel size larger than
3,680 × 2,760
z Tips
7 When [Completed.] appears,
touch
.
The still image selection screen appears
again.
• PictBridge is an industry standard established
by the Camera & Imaging Products Association
(CIPA). You can print still images without using
a computer by connecting a printer directly to a
digital video camera or digital still camera,
regardless of model or manufacturer.
• You can print a still image when viewing it by
touching
(OPTION).
65
Utilizing Media
(MANAGE MEDIA) category
This category enables you to use the media
for various purposes.
(MANAGE MEDIA) category
Item list
MOVIE MEDIA SET
You can select the media for movies
(p. 28).
PHOTO MEDIA SET (DCR-DVD810)
You can select the media for still images
(p. 28).
FINALIZE
You can enable discs to be played on other
devices by finalizing them (p. 67).
MEDIA INFO
You can display the media information,
such as recordable time (p. 71).
MEDIA FORMAT
You can format the media and recover the
recordable free space (p. 72).
UNFINALIZE
You can unfinalize a disc and record more
images on the disc (p. 74).
DISC SELECT GUIDE
Your camcorder advises you of the right
disc for your purpose (p. 75).
REPAIR IMG.DB F.
You can repair the image database file of
the internal memory (DCR-DVD810) or
“Memory Stick PRO Duo” (p. 76).
66
Making the disc compatible with playback on
other devices (Finalizing)
Finalizing makes the recorded disc compatible for playback with other devices and DVD
drives of computers.
Before finalizing, you can select the style of the DVD menu which displays the movie list
(p. 69).
Finalizing is required depending on the type of disc.
• DVD-RW/DVD-R/DVD+R DL: Finalizing is required.
• DVD+RW: Finalizing is not required, except in the following cases:
1 To create a DVD menu
2 To play back on a computer DVD drive
3 If the disc has a short total recording time (less than 5 min. in HQ mode, 8 min. in SP mode,
or 15 min. in LP mode)
b Notes
• Playback compatibility with all devices is not guaranteed.
• No DVD menu is created for DVD-RW (VR mode).
To play back a disc in other devices for the first time (p.69)
Playback on
other devices
Utilizing Media
Operation flow
Finalize
Make desired settings
for the DVD menu.
In case 1, 2
or 3
Continued ,
67
Making the disc compatible with playback on other devices (Finalizing)
(Continued)
To add movies to a finalized disc (p.74)
Movies cannot be
added.
Make a new
recording
Unfinalize the disc.
Movies can be added as usual.
When the DVD menu has been created, a
confirmation screen prompts you to confirm
that you wish to add movies.
b Notes
• During Easy Handycam operation (p. 34), even when you are using a DVD-RW or DVD+RW, you cannot
record additional movies onto the disc after finalizing the disc. Cancel Easy Handycam operation.
To play back a disc in other devices after adding movies (p.69)
Playback on
other devices
Finalize
Only in case 1
68
Make desired settings
for the DVD menu.
Finalizing a disc
b Notes
• It takes from a minute to a maximum of several
hours to finalize a disc. The shorter the amount
of material recorded on the disc, the longer it
takes for finalizing.
5 Touch [YES] t [YES].
Finalizing starts.
6 When finalizing is completed,
touch
.
1 Place your camcorder in a stable
place, and connect the AC
Adaptor to the DC IN jack on your
camcorder.
2 Turn on your camcorder.
4 Touch
(HOME) t
(MANAGE MEDIA) t
[FINALIZE].
• When you finalize a double-sided disc, you
must finalize each side of the disc individually.
• Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
Adaptor during finalizing.
When you need to disconnect the AC Adaptor,
make sure that the power of your camcorder is
set to off and disconnect the AC Adaptor after
the
(Movie) or
(Still) lamp goes off.
Finalizing restarts when you connect the AC
Adaptor and turn on your camcorder again.
z Tips
• When you set to create a DVD menu and
finalize the disc, the DVD menu appears for a
few seconds while finalizing the disc.
• After the disc is finalized, “
” is attached
at the bottom of the disc indicator, such as
“
” in the case of DVD-RW (VIDEO
mode).
Utilizing Media
3 Insert the disc to be finalized.
b Notes
To select a DVD menu style
To select a DVD menu style, touch
(OPTION) t [DVD MENU]
(p. 69).
Go to step 5 if you want to finalize the
disc using [STYLE1] (the default
setting).
1 In step 4, touch
[DVD MENU].
(OPTION) t
2 Select the desired style from 4 types of
pattern with
/
.
Select [NO MENU] if you do not create
a DVD menu.
3 Touch
.
Continued ,
69
Making the disc compatible with playback
on other devices (Finalizing) (Continued)
b Notes
• During Easy Handycam operation (p. 34), the
DVD menu style is fixed to [STYLE1].
• You cannot create a DVD menu for a DVD-RW
(VR mode).
Playing a disc on
other devices
Playing a disc on other devices
Finalizing a disc (p. 67) allows you to view
movies recorded by your camcorder on
other DVD devices. However, we do not
guarantee proper playback on all devices.
You can play back DVD+RW on other
devices without finalizing the disc.
b Notes
• Do not use an 8 cm CD adaptor with an 8 cm
DVD as it may cause a malfunction.
• Make sure that a vertically installed device is
placed in a position such as that the disc can be
placed horizontally.
• On some devices, some discs may not be played
back, movies may freeze for an instant between
scenes, or some functions may be disabled.
z Tips
• Devices that support subtitles can display the
recording date and time where the subtitles
normally appear (p. 82). Refer to the instruction
manual of your device.
• If you have created a DVD menu (p. 69), you
can select the desired scene in the menu.
Playing a disc on a computer
If you finalize the disc (p. 67) that was
recorded on your camcorder, you can play
back the disc on a computer that DVD
playback application is installed.
b Notes
• Even when you use a DVD+RW, you must
finalize the disc (p. 67). Otherwise, a
malfunction may occur.
• Make sure that the DVD drive of the computer
can play an 8 cm DVD.
• Do not use an 8 cm CD adaptor with an 8 cm
DVD as it may cause a malfunction.
• The disc may not be played back, or the movies
may not be played smoothly on some
computers.
• Movies stored on a disc cannot be copied
directly onto a computer to be played back or
edited.
70
Checking media
information
z Tips
• For details on operations and procedures, see the
“PMB Guide” on the supplied CD-ROM (p. 97).
You can check the remaining recordable
time or space of the media selected on
[MOVIE MEDIA SET] (p. 28).
The volume label of the disc
The date when the disc was first used is
recorded.
Touch
(HOME) t
(MANAGE
MEDIA) t [MEDIA INFO].
<e.g.>
When the disc was first used at 0:00 am on
January 1st 2008:
2008_01_01_00H00M_AM
You can check other information by
touching
.
To turn off the display, touch
.
b Notes
Volume
label
• Movies on discs are stored in the following
folders:
– DVD-RW (VR mode)
DVD_RTAV folder
– Other discs and modes
VIDEO_TS folder
Utilizing Media
z Tips
• The calculation for the space of the internal
memory (DCR-DVD810) and “Memory Stick
PRO Duo” is 1MB = 1,048,576 bytes. The
fractions less than 1 MB are discarded when the
media space is displayed. Therefore, the total
amount of available and unavailable space
appears slightly smaller.
• Since there is an image database file area, the
used space is not displayed as 0 MB even if you
perform [MEDIA FORMAT] (p. 72).
z Tips
• Only the information for the media selected on
[MOVIE MEDIA SET] is displayed. Change
the media setting as necessary (p. 28).
71
Formatting media
Formatting deletes all images and returns
the recording media to its original empty
state.
To avoid the loss of important images, dub
or copy them on other media (p. 55, 62)
before performing [MEDIA FORMAT].
6 When [Completed.] appears,
touch
.
b Notes
Formatting the internal memory
(DCR-DVD810) or “Memory
Stick PRO Duo”
1 Connect the AC Adaptor to the
DC IN jack on your camcorder,
then connect the power cord
(mains lead) to the wall outlet
(wall socket).
• Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
Adaptor during formatting.
• Even the images protected with another device
against accidental deletion are also deleted.
• Do not attempt the following operations when
[Executing...] is on the screen:
– To operate the POWER switch or buttons
– To remove the “Memory Stick PRO Duo”
when formatting the “Memory Stick PRO
Duo”
Formatting the disc
2 Turn on your camcorder.
3 When formatting a “Memory Stick
PRO Duo,” insert the “Memory
Stick PRO Duo” to be formatted
into your camcorder.
A DVD-R/DVD+R DL cannot be
formatted. Replace it with a new
disc.
If you format a finalized disc
4 Touch
(HOME) t
(MANAGE MEDIA) t [MEDIA
FORMAT] t [INT. MEMORY]
(DCR-DVD810) or [MEMORY
STICK].
• A DVD-RW (VIDEO mode) returns to
the unfinalized state. The disc must be
finalized again to view its contents on
other devices.
• In the case of a DVD-RW (VR mode)/
DVD+RW, formatting deletes all movies
on a finalized disc. Even after formatting,
or
will appear on the screen.
You do not need to finalize the disc again
before playing the disc on other devices.*
* To create the DVD menu on a DVD+RW,
finalize the disc again (p. 69).
5 Touch [YES] t [YES].
72
1 Connect the AC Adaptor to the
DC IN jack on your camcorder,
then connect the power cord
(mains lead) to the wall outlet
(wall socket).
• You cannot format a disc that has been
protected on other devices. Cancel the
protection with the original device, and then
format it.
z Tips
• When you format a DVD-RW during Easy
Handycam operation (p. 34), the recording
format is fixed to VIDEO mode.
2 Turn on your camcorder.
3 Insert the disc to be formatted
into your camcorder.
4 Touch
x DVD-RW
Select the recording format, [VIDEO]
.
or [VR] (p. 13), then touch
Utilizing Media
(HOME) t
(MANAGE MEDIA) t [MEDIA
FORMAT] t [DISC].
x DVD+RW
Select the aspect ratio of the movie,
[16:9 WIDE] or [4:3], then touch
.
5 Touch [YES].
6 When [Completed.] appears,
touch
.
b Notes
• Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
Adaptor during formatting.
• When you use a double-sided disc, formatting is
required on each side. You can format each side
in the different recording format.
• In the case of DVD+RW, you cannot change the
movie aspect ratio midway. Format the disc
again to change the aspect ratio.
73
Recording additional movies after finalizing
6 When [Completed.] appears,
You can record additional movies on the
finalized DVD-RW (VIDEO mode)/
DVD+RW discs after the following steps, if
the disc has free space.
When using the finalized DVD-RW (VR
mode), you can record additional movies on
the disc without any additional steps.
b Notes
• You cannot record additional movies on
the DVD-R/DVD+R DL after finalizing.
Use a new disc.
When using a DVD-RW (VIDEO
mode) (Unfinalizing)
1 Connect the AC Adaptor to the
DC IN jack on your camcorder,
then connect the power cord
(mains lead) to the wall outlet
(wall socket).
2 Turn on your camcorder.
3 Insert the finalized disc into your
touch
.
When using a DVD+RW
If you have created a DVD menu (p. 69)
during finalizing, you must perform the
following steps prior to recording
additional movies.
1 Connect the AC Adaptor to the
DC IN jack on your camcorder,
then connect the power cord
(mains lead) to the wall outlet
(wall socket).
2 Turn the POWER switch to turn
on the
(Movie) lamp.
3 Insert the finalized disc into your
camcorder.
A confirmation screen appears to
prompt you to confirm that you wish to
record additional movies.
camcorder.
4 Touch
(HOME) t
(MANAGE MEDIA) t
[UNFINALIZE].
5 Touch [YES] t [YES].
4 Touch [YES] t [YES].
5 When [Completed.] appears,
touch
74
.
Finding the right disc
(DISC SELECT GUIDE)
b Notes
• Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
Adaptor during the operation.
• A DVD menu created during finalizing is
deleted.
• For a double-sided disc, perform these steps for
each side of the disc.
Select the option that is right for you on the
screen, then you will be informed of the
appropriate disc for your purposes.
1 Touch
(HOME) t
(MANAGE MEDIA) t [DISC
SELECT GUIDE].
2 Touch the option that is right for
you on the screen.
If you insert the same type of disc as
indicated in [DISC SELECT GUIDE],
you can format it with your selected
settings (p. 72).
Utilizing Media
75
Repairing the image database file
b Notes
This function checks the image database
file and the consistency of movies and still
images on the internal memory (DCRDVD810), or movies in the “Memory Stick
PRO Duo,” and repairs any inconsistencies
found.
1 Touch
(HOME) t
(MANAGE MEDIA) t
[REPAIR IMG.DB F.] t [INT.
MEMORY] (DCR-DVD810) or
[MEMORY STICK].
2 Touch [YES].
Your camcorder will check the image
database file.
When mismatching is not found, touch
to finish the operation.
3 Touch [YES].
4 When [Completed.] appears,
touch
76
.
• Do not apply mechanical shock or vibration to
the camcorder during this operation.
• Do not disconnect the AC Adaptor or remove
the battery pack.
• While the image database file on the “Memory
Stick PRO Duo” are being repaired, do not
remove the “Memory Stick PRO Duo.”
• Repairing for the internal memory (DCRDVD810) and a “Memory Stick PRO Duo” are
performed separately.
Preventing data on the internal memory from
being recovered (DCR-DVD810)
[ EMPTY] allows you to write
unintelligible data onto the internal
memory. In this way, it may become more
difficult to recover any original data. When
you dispose of or give the camcorder to
somebody, it is recommended that you
perform [ EMPTY].
4 Press and hold the . (BACK
LIGHT) button down (p. 129).
The [
EMPTY] screen appears.
b Notes
• If you perform [
EMPTY], all the images are
deleted. To avoid the loss of important images,
dub or copy them on other media (p. 55, 62)
before performing [
EMPTY].
• You cannot perform [
EMPTY] unless you
connect the AC Adaptor to the wall outlet (wall
socket).
• Disconnect all cables except the AC Adaptor.
• While performing [
EMPTY], do not apply
any vibrations or shocks to the camcorder.
DC IN jack on your camcorder,
then connect the power cord
(mains lead) to the wall outlet
(wall socket).
6 When [Completed.] appears,
touch
.
b Notes
• If you stop performing [
EMPTY] while
[Executing...] is displayed, be sure to complete
the operation by performing [
EMPTY]
again before you use the camcorder the next
time.
Utilizing Media
1 Connect the AC Adaptor to the
5 Touch [YES] t [YES].
2 Turn on your camcorder.
3 Touch
(HOME) t
(MANAGE MEDIA) t [MEDIA
FORMAT] t [INT. MEMORY].
The screen of formatting the internal
memory appears.
77
Customizing Your Camcorder
What you can do with the
(SETTINGS)
category of the HOME MENU
You can change the recording functions and
the operating settings for your convenience.
Using the HOME MENU
3 Touch the desired setup item.
If the item is not on the screen, touch
/
to change the page.
1 Turn on your camcorder, then
press
(HOME).
(HOME)
4 Touch the desired item.
If the item is not on the screen, touch
/
to change the page.
(HOME)
5 Change the setting, then touch
(SETTINGS) category
2 Touch
78
(SETTINGS).
.
List of the
(SETTINGS)
category items
MOVIE SETTINGS (p. 80)
SOUND/DISP SET*3 (p. 86)
Items
Page
VOLUME*2
86
BEEP*2
86
Items
Page
LCD BRIGHT
86
REC MODE
80
LCD BL LEVEL
86
AUDIO MODE*1
80
LCD COLOR
86
NIGHTSHOT LIGHT
80
VF B.LIGHT
86
WIDE SELECT
80
DIGITAL ZOOM
81
STEADYSHOT
81
Items
Page
AUTO SLW SHUTTR
81
TV TYPE
87
GUIDEFRAME
81
DISP OUTPUT
87
REMAINING SET
SUB-T DATE
INDEX SET*2
81
82
82
Items
IMAGE SIZE*2
Page
82
CLOCK/
LANG (p. 88)
Items
Page
CLOCK SET*2
25
AREA SET
88
DST SET/SUMMERTIME
88
LANGUAGE SET*2
88
FILE NO.
83
NIGHTSHOT LIGHT
80
GUIDEFRAME
81
Items
Page
FLASH MODE*1*2
83
DEMO MODE
88
FLASH LEVEL*1
83
CALIBRATION
122
REDEYE REDUC*1
84
A.SHUT OFF
89
QUICK ON STBY
89
REMOTE CTRL*1
89
VIEW IMAGES SET (p. 84)
Items
Page
DATA CODE
84
DISPLAY
85
GENERAL SET (p. 88)
Customizing Your Camcorder
PHOTO SETTINGS (p. 82)
OUTPUT SETTINGS (p. 87)
*1 DCR-DVD710/DVD810
*2 You can set these items also during Easy
Handycam operation (p. 34).
*3 [SOUND SETTINGS] during Easy Handycam
operation (p. 34)
79
MOVIE SETTINGS
(Items for recording movies)
AUDIO MODE (DCRDVD710/DVD810)
You can select audio recording format.
B 5.1ch SURROUND (
)
Records 5.1ch surround sound.
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
/
(HOME MENU) t page 78
(OPTION MENU) t page 90
The default settings are marked with B.
REC MODE (Recording
mode)
You can select a recording mode to record a
movie with the image quality from 3 levels.
)
Records in high quality mode.
(9M (HQ))
B SP (
)
Records in standard quality mode.
(6M (SP))
LP (
)
Records stereo sound.
NIGHTSHOT LIGHT
How to set
HQ (
2ch STEREO (
)
Increases the recording time (Long Play).
(3M (LP))
b Notes
• If you record in LP mode, the quality of scenes
may be degraded, or scenes with quick
movements may appear with block noise when
you play back the movie.
When using either the NightShot plus
(p. 41) or the [S. NIGHTSHOT PLS]
(p. 95) function to record, you can record
clearer images by setting [NIGHTSHOT
LIGHT], which emits infrared light
(invisible). The default setting is [ON].
b Notes
• Do not cover the infrared port with your fingers
or other objects (p. 131).
• Remove the conversion lens (optional).
• The maximum shooting distance using
[NIGHTSHOT LIGHT] is about 3 m (10 feet).
WIDE SELECT
When recording images, you can select the
aspect ratio according to the TV connected.
Refer also to the instruction manuals
supplied with your TV.
B 16:9 WIDE
Records images to the full screen on a 16:9
(wide) TV screen.
4:3 (
)
Records images to the full screen on a 4:3
TV screen.
z Tips
• See page 14, 33 on the expected recording time
of each recording mode.
• You can set the recording mode separately for
each media (p. 28).
80
b Notes
• Set [TV TYPE] correctly according to the TV
connected for playback (p. 48).
DIGITAL ZOOM
You can select the maximum zoom level in
case you want to zoom greater than optical
zoom magnification. Note that the image
quality decreases when you use the digital
zoom.
STEADYSHOT
You can compensate for camera shake. Set
[STEADYSHOT] to [OFF] ( ) when
using a tripod (optional), then the image
becomes natural. The default setting is
[ON].
AUTO SLW SHUTTR
(Auto slow shutter)
The right side of the bar shows the digital
zooming factor. The zooming zone appears
when you select the zooming level.
DCR-DVD610
B OFF
Up to 40 × zoom is performed optically.
Up to 40 × zoom is performed optically, and
after that, up to 80 × zoom is performed
digitally.
2000×
Up to 40 × zoom is performed optically, and
after that, up to 2,000 × zoom is performed
digitally.
DCR-DVD710/DVD810
B OFF
Up to 25 × zoom is performed optically.
50×
Up to 25 × zoom is performed optically, and
after that, up to 50 × zoom is performed
digitally.
2000×
Up to 25 × zoom is performed optically, and
after that, up to 2,000 × zoom is performed
digitally.
GUIDEFRAME
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP/
BATT INFO to make the frame disappear.
The default setting is [OFF].
z Tips
• Positioning the subject at the cross point of the
guide frame makes a balanced composition.
REMAINING SET
B ON
Always displays the remaining media
capacity indicator.
Customizing Your Camcorder
80×
When recording in dark places, the shutter
speed is automatically reduced to 1/30
second. The default setting is [ON].
AUTO
Displays the remaining recording time of
movie for about 8 seconds in the following
situations.
– When your camcorder recognizes the
remaining media capacity when the
POWER switch is set to
(Movie).
– When you press DISP/BATT INFO to
switch the indicator from off to on when
the POWER switch is set to
(Movie).
– When you select the movie recording
mode on the HOME MENU.
Continued ,
81
MOVIE SETTINGS (Continued)
PHOTO SETTINGS
(Items for recording still images)
b Notes
• When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.
SUB-T DATE
You can display the recording date and time
when playing back a disc on a device with a
subtitle display function. The default setting
is [ON].
Also refer to the instruction manual of the
playback device.
b Notes
• You cannot set [SUB-T DATE] for the internal
memory (DCR-DVD810) or a “Memory Stick
PRO Duo.”
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
How to set
(HOME MENU) t page 78
(OPTION MENU) t page 90
The default settings are marked with B.
IMAGE SIZE
S
INDEX SET
The camcorder detects faces automatically
during movie recording. The default setting
is [ON].
Face icons and their meanings
: This icon appears when the setting is
[ON].
: This icon flashes when your camcorder
detects a face. The icon stops flashing when
the face is recorded in Face Index.
: This icon appears when faces cannot
be recored in Face Index.
To play back scenes using Face Index, see
page 45.
DCR-DVD610
B VGA (0.3M) (
640 × 480)
Records the still images of aspect ratio 4:3
clearly.
640 × 360)
0.2M (
Records still images clearly in the 16:9
(wide) ratio.
DCR-DVD710/DVD810
B 1.0M (
1152 × 864)
Records still images of aspect ratio 4:3
clearly.
0.7M (
1152 × 648)
b Notes
Records still images clearly in the 16:9
(wide) ratio.
• The number of faces detected in a movie is
limited.
VGA (0.3M) (
640 × 480)
Records the maximum number of still
images of aspect ratio 4:3.
82
/
Number of still images recordable on
the internal memory (DCR-DVD810)
You can record up to 9,999 still images on
the internal memory. The recordable
number of still images varies depending on
the recording condition.
Number of still images recordable on
a “Memory Stick PRO Duo” (approx.)
512MB
1GB
2GB
4GB
8GB
1.0M
1152 × 864
VGA (0.3M)
640 × 480
880
1800
3700
7200
14500
2800
5800
11500
23000
47000
b Notes
z Tips
• You can use a “Memory Stick PRO Duo” with a
capacity of 256MB or smaller for recording still
images.
• The numbers in the table are of the recordable
number of still images of the maximum image
size that can be recorded with your camcorder.
Check the actual recordable number on the
screen when you are recording still images
(p. 133).
FILE NO. (File number)
B SERIES
Assigns file numbers in sequence, even if
the “Memory Stick PRO Duo” is replaced
with another one.
See page 80.
GUIDEFRAME
See page 81.
FLASH MODE (DCRDVD710/DVD810)
You can set this function when you use an
external flash (optional) that is compatible
with your camcorder.
B ON ( )
Flashes every time.
AUTO
Flashes automatically.
b Notes
• Remove any dust from the surface of the flash
before using it. Flash effect may be impaired if
heat discoloration or dust obscures the lamp.
• If you use the flash in bright places such as
when shooting a backlit subject, the flash may
not be effective.
FLASH LEVEL (DCRDVD710/DVD810)
You can set this function when you use an
external flash (optional) that is compatible
with your camcorder.
HIGH(
Customizing Your Camcorder
• Numbers in the table are of when using a
“Memory Stick PRO Duo” made by Sony
Corporation. The recordable number of still
images varies depending on the recording
conditions or the type of “Memory Stick.”
NIGHTSHOT LIGHT
)
Makes the flash level higher.
B NORMAL( )
LOW(
)
Makes the flash level lower.
RESET
Assigns individual file numbers for each
“Memory Stick PRO Duo.”
Continued ,
83
PHOTO SETTINGS (Continued)
VIEW IMAGES SET
(Items to customize the display)
REDEYE REDUC
(Redeye reduction)
(DCR-DVD710/DVD810)
You can set this function when you record
still images using an external flash
(optional) that is compatible with your
camcorder. If you set [FLASH MODE]
(p. 83) to [AUTO] or [ON] when
[REDEYE REDUC] is set to [ON],
appears on the screen. You can prevent
redeye by activating the pre-flash before
recording.
b Notes
• The redeye reduction may not produce the
desired effect due to individual differences and
other conditions.
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
/
How to set
(HOME MENU) t page 78
(OPTION MENU) t page 90
The default settings are marked with B.
DATA CODE
During playback, your camcorder displays
the information (data code) recorded
automatically at the time of recording.
B OFF
Data code is not displayed.
DATE/TIME
Displays the date and time.
CAMERA DATA
Displays camera setting data.
DATE/TIME
A Date
B Time
84
CAMERA DATA
DISPLAY
Movie
You can select the number of thumbnails that
appear on the VISUAL INDEX or Playlist
screen.
Thumbnail
Glossary (p. 135)
B ZOOM LINK
Changes the number of thumbnails (6 or 12)
with the power zoom lever on your
camcorder.*
Still image
6IMAGES
Displays thumbnails of 6 images.
12IMAGES
Displays thumbnails of 12 images.
z Tips
•
appears in the following cases.
– Still images recorded on your camcorder
using an optional flash (DCR-DVD710/
DVD810)
– Still images recorded on other cameras using
a flash
• The data code is displayed on the TV screen if
you connect your camcorder to a TV.
• The indicator toggles through the following
sequences as you press DATA CODE on the
Remote Commander: [DATE/TIME] t
[CAMERA DATA] t [OFF] (no indication)
(DCR-DVD710/DVD810).
• Depending on the media condition, bars [--:--:--]
appear.
Customizing Your Camcorder
C SteadyShot off
D Brightness
E White balance
F Gain
G Shutter speed
H Aperture value
I Exposure
* You can operate with the zoom buttons on the
LCD frame or on the Remote Commander
(DCR-DVD710/DVD810).
85
SOUND/DISP SET
(Items to adjust sound and the screen)
LCD BL LEVEL (LCD
backlight level)
You can adjust the brightness of the LCD
screen’s backlight.
B NORMAL
Standard brightness.
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
/
Brightens the LCD screen.
How to set
b Notes
(HOME MENU) t page 78
(OPTION MENU) t page 90
The default settings are marked with B.
VOLUME
Touch
(p. 45).
BRIGHT
/
to adjust the volume
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is
slightly reduced during recording.
• If you open the LCD panel 180 degrees to face
the screen outside and close the LCD panel to
the camcorder body, the setting becomes
[NORMAL] automatically.
z Tips
BEEP
• This adjustment does not affect the recorded
images in any way.
B ON
A melody sounds when you start/stop
recording, or operate the touch panel.
LCD COLOR
OFF
Cancels the melody and shutter sound.
LCD BRIGHT
Low intensity
You can adjust the brightness of the LCD
screen.
1 Adjust the brightness with
2 Touch
.
You can adjust the color of the LCD screen
with
/
.
/
.
z Tips
• This adjustment does not affect the recorded
images in any way.
High intensity
z Tips
• This adjustment does not affect the recorded
images in any way.
VF B.LIGHT (Viewfinder
backlight)
You can adjust the brightness of the
viewfinder.
B NORMAL
Standard brightness.
BRIGHT
Brightens the viewfinder screen.
86
OUTPUT SETTINGS
(Items for when connecting other devices)
b Notes
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is
slightly reduced during recording.
z Tips
• This adjustment does not affect the recorded
images in any way.
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
/
How to set
(HOME MENU) t page 78
The default settings are marked with B.
TV TYPE
See page 48.
B LCD PANEL
Shows displays such as the time code on
the LCD screen and in the viewfinder.
V-OUT/PANEL
Shows displays such as the time code on
the TV screen, LCD screen, and in the
viewfinder.
Customizing Your Camcorder
DISP OUTPUT
87
CLOCK/ LANG
GENERAL SET
(Items to set clock and language)
(Other setup items)
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
/
How to set
(HOME MENU) t page 78
CLOCK SET
See page 25.
AREA SET
You can adjust a time difference without
stopping the clock.
Set your local area using
/
when
using your camcorder in other time zones.
Refer to the world time difference on page
115.
DST SET/SUMMERTIME
You can change this setting without
stopping the clock.
Set this to [ON] to move the time forward
1 hour.
LANGUAGE SET
You can select the language to be used on
the LCD screen.
z Tips
• Your camcorder offers [ENG[SIMP]]
(simplified English) for when you cannot find
your native tongue among the options.
88
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
/
How to set
(HOME MENU) t page 78
The default settings are marked with B.
DEMO MODE
You can view the demonstration in about
10 minutes, after you turn the POWER
switch to
(Movie). The default setting
is [ON].
z Tips
• The demonstration will be suspended in the
following situations.
– When you press START/STOP.
– When you press DUBBING (DCR-DVD810)
– When you touch the screen during the
demonstration (The demonstration starts
again after about 10 minutes).
– When you slide the disc cover OPEN switch.
– When you move the POWER switch to still
image recording.
– When you press
(HOME)/
(VIEW
IMAGES).
CALIBRATION
See page 122.
A.SHUT OFF (Auto shut
off)
B 5min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.
b Notes
• When you connect your camcorder to a wall
outlet (wall socket), [A.SHUT OFF] is
automatically set to [NEVER].
QUICK ON STBY
b Notes
• [A.SHUT OFF] does not work in sleep mode (p.
41).
REMOTE CTRL (Remote
control) (DCR-DVD710/
DVD810)
You can use the supplied Remote
Commander (p. 132). The default setting is
[ON].
Customizing Your Camcorder
You can set the time after which the
camcorder turns off automatically in sleep
mode. The default setting is [10min].
z Tips
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
89
Activating functions using the
The OPTION MENU appears just like the
pop-up window that appears when you
right-click the mouse on a computer.
Various functions are displayed.
Using the OPTION MENU
1 While using your camcorder,
touch
(OPTION) on the screen.
(OPTION)
Tab
2 Touch the desired item.
If you cannot find the desired item,
touch another tab to change the page.
If you cannot find the item anywhere,
the function does not work under the
current situation.
90
OPTION MENU
3 Change the setting, then touch
.
b Notes
• The tabs and items that appear on the screen
depend on the recording/playback status of your
camcorder at the time.
• Some items appear without a tab.
• The OPTION MENU cannot be used during
Easy Handycam operation (p. 34).
Recording items on the OPTION
MENU
*
Items
Page
tab
Viewing items on the OPTION
MENU
Items
*
Page
tab
FOCUS
-
92
DELETE**
a
51
SPOT FOCUS
-
92
DELETE by date**
a
51
TELE MACRO
-
92
DELETE ALL**
a
51
EXPOSURE
-
93
SPOT METER
-
93
SCENE SELECTION
-
93
DIVIDE
a
58
WHITE BAL.
-
94
ERASE**
a
60
COLOR SLOW SHTR
-
95
ERASE ALL**
a
60
S. NIGHTSHOT PLS
-
95
MOVE**
a
61
FADER
-
95
ADD**
a
59
D.EFFECT
-
96
ADD by date**
a
59
PICT.EFFECT
-
96
ADD ALL**
a
59
PRINT
a
64
SLIDE SHOW
-
47
tab
tab
-- (A tab depends on the situation/No tab)
REC MODE
a
80
VOLUME
a
86
BLT-IN ZOOM MIC
-
96
DATA CODE
a
84
MICREF LEVEL
-
96
SLIDE SHOW SET
-
47
a
82
COPIES
-
64
SELF-TIMER
-
96
DATE/TIME
-
64
FLASH MODE**
a
83
SIZE
-
64
DVD MENU
-
69
IMAGE SIZE
* Items that are included also in the HOME
MENU
** DCR-DVD710/DVD810
Customizing Your Camcorder
tab
* Items that are included also in the HOME
MENU
** These items are also available in the HOME
MENU, but with different item names.
91
Functions set in the
OPTION MENU
Items you can set only on the OPTION
MENU will be described below.
SPOT FOCUS
The default settings are marked with B.
You can select and adjust the focal point to
aim it at a subject not located at the center
of the screen.
FOCUS
You can adjust the focus manually. You can
select this function also when you want to
focus on a certain subject intentionally.
1 Touch [MANUAL].
9 appears.
2 Touch
(focusing on close subjects)/
(focusing on distant subjects) to
sharpen the focus.
appears when the
focus cannot be adjusted any closer, and
appears when the focus cannot be adjusted
farther away.
3 Touch
.
To adjust the focus automatically, touch
[AUTO] t
in step 1.
b Notes
• The minimum possible distance between the
camcorder and the subject while maintaining
sharp focus is about 1 cm (about 13/32 in.) for
wide angle and about 80 cm (about 2 5/8 feet)
for telephoto.
z Tips
• It is easier to focus on the subject by moving the
power zoom lever towards T (telephoto) to
adjust the focus, then towards W (wide angle) to
adjust the zoom for recording. When you want
to record a subject at close range, move the
power zoom lever to W (wide angle), then
adjust the focus.
• The focal distance information (the distance at
which the subject is focused on, for when it is
dark and hard to adjust focus) appears for a few
seconds in the following cases. (It will not be
displayed correctly if you are using a conversion
lens (optional).)
– When the focus mode is switched from
automatic to manual.
– When you set focus manually.
92
1 Touch the subject on the screen.
9 appears.
2 Touch [END].
To adjust the focus automatically, touch
[AUTO] t [END] in step 1.
b Notes
• If you set [SPOT FOCUS], [FOCUS] is
automatically set to [MANUAL].
TELE MACRO
This is useful to record small subjects, such
as flowers or insects. You can blur out
backgrounds and the subject stands out
clearer.
When you set [TELE MACRO] to [ON]
( ), the zoom (p. 40) moves to the top of
the T (telephoto) side automatically and
allows recording subjects at a close
distance.
– DCR-DVD610
Down to about 43 cm (17 in.)
– DCR-DVD710/DVD810
Down to about 38 cm (15 in.)
To cancel, touch [OFF], or zoom to wide
angle (W side).
b Notes
• When recording a distant subject, focusing may
be difficult and can take some time.
• Adjust the focus manually ([FOCUS], p. 92)
when it is hard to focus automatically.
b Notes
• If you set [SPOT METER], [EXPOSURE] is
automatically set to [MANUAL].
EXPOSURE
You can fix the brightness of an image
manually. Adjust the brightness when the
subject is too bright or too dark relative to
the background.
SCENE SELECTION
You can record images effectively in
various situations with the [SCENE
SELECTION] function.
B AUTO
Select this to automatically record images
effectively without the [SCENE
SELECTION] function.
TWILIGHT* (
1 Touch [MANUAL].
appears.
2 Adjust the exposure by touching
.
3 Touch
.
)
Select this to take night view without
losing the mood.
/
CANDLE ( )
Select this to take scene without losing
candle mood.
SPOT METER (Flexible
spot meter)
You can adjust and fix the exposure to the
subject, so that it is recorded in suitable
brightness even when there is strong
contrast between the subject and the
background, such as subjects in the
spotlight on stage.
SUNRISE&SUNSET* (
)
Select this to reproduce the atmosphere of
scenes such as sunsets or sunrises.
FIREWORKS* (
Customizing Your Camcorder
To return the setting to automatic exposure,
touch [AUTO] t
in step 1.
)
Select this to take spectacular shots of
fireworks.
1 Touch the point where you want to fix and
adjust the exposure on the screen.
appears.
2 Touch [END].
To return the setting to automatic exposure,
touch [AUTO] t [END] in step 1.
Continued ,
93
Functions set in the
LANDSCAPE* (
OPTION MENU (Continued)
)
Select this to record distant subjects
clearly. This setting also prevents your
camcorder from focusing on glass or metal
mesh in windows that comes in between
the camcorder and the subject.
PORTRAIT (
* Your camcorder is set to focus only on distant
subjects.
** Your camcorder is set not to focus on nearby
subjects.
b Notes
• The [WHITE BAL.] setting is cleared when you
set [SCENE SELECTION].
WHITE BAL. (White
balance)
)
Select this to bring out the subject such as
people or flowers while creating a soft
background.
You can adjust the color balance to the
brightness of the recording environment.
B AUTO
The white balance is adjusted
automatically.
SPOTLIGHT** (
OUTDOOR (
)
Select this to prevent people’s faces from
appearing excessively white when subjects
are lit by strong light.
)
The white balance is adjusted to be
appropriate for the following recording
conditions:
– Outdoors
– Night views, neon signs and fireworks
– Sunrise or sunset
– Under daylight fluorescent lamps
SPORTS** (Sports lesson) (
)
Select this to minimize shake when
recording fast moving subjects.
BEACH** (
)
Select this to take the vivid blue of the
ocean or a lake.
INDOOR (n)
The white balance is adjusted to be
appropriate for the following recording
conditions:
– Indoors
– At party scenes or studios where the lighting
conditions change quickly
– Under video lamps in a studio, or under
sodium lamps or incandescent-like color
lamps
ONE PUSH (
SNOW** (
)
Select this to take bright pictures of a white
landscape.
94
)
The white balance will be adjusted
according to the ambient light.
1 Touch [ONE PUSH].
2 Frame a white object such as a piece of
paper, to fill the screen under the same
lighting conditions as you will record
the subject.
3 Touch [
].
flashes quickly. When the white
balance is adjusted and stored in the
memory, the indicator stops flashing.
b Notes
• Set [WHITE BAL.] to [AUTO] or adjust the
color in [ONE PUSH] under white or cool white
fluorescent lamps.
• When you select [ONE PUSH], keep framing
white object while
is flashing quickly.
•
flashes slowly if [ONE PUSH] could not
be set.
• When [ONE PUSH] was selected, if
keeps
flashing after touching
, set [WHITE
BAL.] to [AUTO].
• If you set [WHITE BAL.], [SCENE
SELECTION] is automatically set to [AUTO].
z Tips
COLOR SLOW SHTR
(Color Slow Shutter)
When you set [COLOR SLOW SHTR] to
[ON], you can record an image brighter in
color even in dark places.
appears on the screen.
To cancel [COLOR SLOW SHTR], touch
[OFF].
To return to the normal setting, set [S.
NIGHTSHOT PLS] to [OFF].
b Notes
• Do not use [S. NIGHTSHOT PLS] in bright
places. This may cause a malfunction.
• Do not cover the infrared port with your fingers
or other objects (p. 131).
• Remove the conversion lens (optional).
• Adjust the focus manually ([FOCUS], p. 92)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
FADER
You can record a transition with the
following effects adding to the interval
between scenes.
1 Select the desired effect in [STBY] (during
fading in) or [REC] (during fading out)
mode, then touch
.
2 Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the fader before starting the
operation, touch [OFF] in step 1.
If you press START/STOP, the setting is
cleared.
Customizing Your Camcorder
• If you changed the battery pack, or moved your
camcorder to or from outdoors when [AUTO]
was selected, aim your camcorder at a nearby
white object with [AUTO] for about 10 seconds
for better color balance adjustment.
• If you changed the [SCENE SELECTION]
setting or moved your camcorder to or from
outdoors during white balance setting with
[ONE PUSH], you need to repeat the [ONE
PUSH] operation.
to [ON] while the NIGHTSHOT PLUS
switch (p. 41) is also set to ON.
appears on the screen.
b Notes
• Adjust the focus manually ([FOCUS], p. 92)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
S. NIGHTSHOT PLS
(Super NightShot plus)
STBY
Fading out
REC
Fading in
WHITE FADER
BLACK FADER
The image will be recorded at a maximum
of 16 times the sensitivity of NightShot plus
recording if you set [S. NIGHTSHOT PLS]
Continued ,
95
Functions set in the
OPTION MENU (Continued)
D.EFFECT (Digital effect)
When you set [OLD MOVIE],
appears
and you can add an old movie effect to
images.
To cancel [D.EFFECT], touch [OFF].
PICT.EFFECT (Picture
effect)
You can add special effects to an image
during recording.
appears.
B OFF
)
Records surround sound faithfully. This
setting is not suitable for recording
conversations.
SELF-TIMER
When you set [SELF-TIMER] to [ON],
appears on the screen.
When you press PHOTO, your camcorder
starts counting down, and records a still
image after about 10 seconds.
To cancel recording, touch [RESET].
To cancel the self-timer, select [OFF].
Does not use [PICT.EFFECT] setting.
z Tips
SEPIA
• You can also operate by pressing PHOTO on
the Remote Commander (DCR-DVD710/
DVD810) (p. 132).
Images appear in sepia.
B&W
Images appear in black and white.
PASTEL
Images appear as a pale pastel drawing.
BLT-IN ZOOM MIC
When you set [BLT-IN ZOOM MIC] to
[ON] (
), you can record sound with
directivity as you move the power zoom
lever. The default setting is [OFF].
MICREF LEVEL
You can select the microphone level for
recording sound.
Select [LOW] when you want to record
exciting and powerful sound in a concert
hall, etc.
B NORMAL
Records various surround sounds,
converting them into the certain level.
96
LOW (
Performing with Your Computer
What you can do with Windows computer
When you install the “Picture Motion
Browser” on a Windows computer from the
supplied CD-ROM, you can enjoy the
following operations.
x Environment for using “Picture Motion
Browser”
x Importing images taken with your
camcorder to a computer
OS: Microsoft Windows 2000 Professional
SP4/Windows XP SP2*/Windows Vista*
x Viewing imported images on a
computer
* 64-bit editions and Starter (Edition) are not
supported.
• Standard installation is required.
• Operation is not assured if the above OS has
been upgraded or in a multi-boot environment.
x Creating a DVD
Installing the software
x Copying a disc
t Video Disc Copier
CPU: Intel Pentium III 1 GHz or faster
For details on the functions of “Picture
Motion Browser,” see “PMB Guide”
(p. 99).
Application: DirectX 9.0c or later (This
product is based on DirectX technology. It
is necessary to have DirectX installed.)
Sound system: Direct Sound compatible
sound card
Memory: 256 MB or more
Hard disk: Disk volume required for
installation: Approximately 500 MB (5 GB
or more may be necessary when creating a
DVD.)
Display: Minimum 1,024 × 768 dots
Others: USB port (this must be
provided as standard), Hi-Speed USB (USB
2.0 compatible is recommended), DVD
burner (CD-ROM drive is necessary for
installation.)
b Notes
• Your computer must meet hardware
requirements other than those described above
for each OS.
• Even in a computer environment where the
operations are guaranteed, frames may be
dropped from movies, resulting in uneven
playback. However, imported images and
images on discs created subsequently will not be
affected.
• Operations are not guaranteed on all the
recommended environments. For example, other
open or background applications running on
currently may limit product performance.
• “Picture Motion Browser” does not support
5.1ch surround sound reproduction. The sound
is reproduced in 2ch sound.
Continued ,
Performing with Your Computer
x Using a Macintosh computer
The supplied software “Picture Motion
Browser” does not support a Macintosh
computer.
On the advanced use of images on your
camcorder connected to your Macintosh
computer, see the following URL:
http://guide.d-imaging.sony.co.jp/mac/
ms/us/
97
What you can do with Windows computer (Continued)
• Depending on your computer, 8 cm media
(DVD+R DL, etc.) cannot be used.
• If you use a Notebook PC, connect it to the AC
Adaptor as the power source. Otherwise, the
software will not work properly due to the
power saving function of the PC.
• You can read images recorded on a “Memory
Stick PRO Duo” in a Memory Stick slot of a
computer. However, in the following cases, do
not use the Memory Stick slot of the computer,
but connect your camcorder to the computer
with the USB cable:
– The computer is not compatible with a
“Memory Stick PRO Duo.”
– A Memory Stick Duo adaptor is required.
– A “Memory Stick PRO Duo” cannot be read
in the Memory Stick slot.
– Reading data from the Memory Stick slot is
slow.
x Installation procedure
You need to install the software to your
Windows computer before connecting
your camcorder to the computer. The
installation is required only for the first
time.
Contents to be installed and procedures
may differ depending on your OS.
If the screen does not appear
1 Click [Start], then click [My Computer].
(For Windows 2000, double-click [My
Computer].)
2 Double-click [SONYPICTUTIL (E:)]
(CD-ROM) (disc drive).*
* Drive names (such as (E:)) may vary
depending on the computer.
4 Click [Install].
5 Select the language for the application to
be installed, then click [Next].
6 As the screen to confirm the connection
appears, connect your camcorder to the
computer following the steps below.
1 Connect the AC Adaptor to a wall outlet
(wall socket).
2 Turn on your camcorder.
3 Connect the (USB) jack (p. 129) of your
camcorder to the computer using the
supplied USB cable.
4 Touch [ USB CONNECT] on the
screen of your camcorder.
1 Confirm that your camcorder is not
connected to the computer.
2 Turn on the computer.
b Notes
• Log on as an Administrator for installation.
• Close all applications running on the
computer before installing the software.
3 Place the supplied CD-ROM in the disc
drive of your computer.
The installation screen appears.
7 Click [Continue].
8 Read [License Agreement], select [I accept
the terms of the license agreement] if you
agree, then click [Next].
9 Confirm the installation settings, then click
[Install].
b Notes
• Even if a screen prompting you to restart
your computer appears, you do not need to
restart it at this time. Restart your computer
after completing the installation.
• It may take some time for the
authentication.
0 Follow the on-screen instructions to install
the software.
98
One of the following installation screens
appears, depending on the computer
environment. Check the screen and follow
the instructions displayed to install the
required software.
– Sonic UDF Reader*
Software required to recognize a DVD-RW
(VR mode) disc
– Windows Media Format 9 Series Runtime
(Windows 2000 only)
Software required to create a DVD
– Microsoft DirectX 9.0c*
Software required to handle movies
* Windows 2000, Windows XP only
qa Restart the computer if required to
complete the installation.
The [USB SELECT] screen appears on
your camcorder. Touch the item you want
to operate on the screen.
z Tips
• If the [USB SELECT] screen does not appear,
touch
(HOME) t
(OTHERS) t
[USB CONNECT].
Recommended USB cable connection
To assure the proper functioning of your
camcorder, connect your camcorder to a
computer as below.
• Connect only the camcorder to the USB port of
your computer. Do not connect anything else to
other USB ports of a computer.
• When connecting to a computer with a USB
keyboard and USB mouse connected as standard
equipment, connect the camcorder to another
USB port using the USB cable.
b Notes
x Operating the Picture Motion Browser
• To start “Picture Motion Browser,” click
[Start] - [All Programs] - [Sony Picture
Utility] - [PMB - Picture Motion
Browser].
• The basic operation of “Picture Motion
Browser” is described on “PMB Guide.”
To view “PMB Guide,” click [Start] - [All
Programs] - [Sony Picture Utility] [Help] - [PMB Guide].
x Connecting your camcorder to a
computer
To connect your camcorder to a computer,
follow the steps below.
1 Connect the AC Adaptor to your camcorder
and a wall outlet (wall socket).
2 Turn on your camcorder.
3 Connect the (USB) jack (p. 129) of your
camcorder to a computer using the supplied
USB cable.
To disconnect the USB cable
1 Click the [Unplug or eject hardware] icon
on the task tray on the bottom right of the
desk top.
Performing with Your Computer
qs Remove the CD-ROM from the disc drive
of your computer.
• Operations are not guaranteed when multiple
USB devices are connected to a computer.
• Be sure to connect the USB cable to a USB port.
If the USB cable is connected to a computer via
a USB keyboard or USB hub, operations are not
guaranteed.
2 Click [Safely remove USB Mass Storage
Device].
3 Click [OK] (Windows 2000 only).
4 Touch [END] on the screen of your
camcorder.
5 Touch [YES] on the screen of your
camcorder.
Continued ,
99
What you can do with Windows computer (Continued)
6 Disconnect the USB cable from the
camcorder and the computer.
b Notes
• Do not disconnect the USB cable while the
ACCESS/access lamp is lit.
• Before turning off your camcorder, disconnect
the USB cable following the proper procedures
described above.
• Disconnect the USB cable using the proper
procedures described above. Otherwise, files
stored on the media may not be updated
correctly. Also, disconnecting the USB cable
improperly may cause a malfunction of the
media.
100
Troubleshooting
Troubleshooting
If you run into any problems using your
camcorder, use the following table to
troubleshoot the problem. If the problem
persists, disconnect the power source and
contact your Sony dealer.
• Overall operations/Easy Handycam operation/
Remote Commander ................................... 101
• Batteries/Power sources ............................. 102
• LCD screen/Viewfinder.............................. 103
• Media ......................................................... 103
• Recording ................................................... 104
• Playing back images on your camcorder ... 106
• Playing back a disc on other devices .......... 106
• Playing back a “Memory Stick PRO Duo” on
other devices ............................................... 107
• Editing images on your camcorder ............ 107
• Connecting/Dubbing to other devices ....... 108
• Connecting to a computer ........................... 108
• Functions that cannot be used simultaneously
.................................................................... 109
Overall operations/Easy
Handycam operation/Remote
Commander
The power does not turn on.
The camcorder does not operate
even when the power is set to on.
• It takes a few seconds for your camcorder to
be ready to record after the power is turned
on. This is not a malfunction.
• Disconnect the AC Adaptor from the wall
outlet (wall socket) or remove the battery
pack, then reconnect it after about 1 minute.
If the functions still do not work, press the
RESET button (p. 129) using a sharp-pointed
object. (If you press the RESET button, all
settings, including the clock setting, are
reset.)
• The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
• During Easy Handycam operation (p. 34),
the following buttons/functions are not
available.
– Turning the LCD backlight on and off
(pressing and holding the DISP BATT/
INFO button for a few seconds) (p. 26)
– . (BACK LIGHT) button (p. 41)
– Playback zoom (p. 46)
– DUBBING button (DCR-DVD810) (p. 55)
The
(OPTION) button is not
displayed.
• The OPTION MENU cannot be used during
Easy Handycam operation (p. 34).
The menu settings have been
changed automatically.
• Most menu items automatically return to
their default settings during Easy Handycam
operation (p. 34).
• The following menu items are fixed during
Easy Handycam operation:
– Movie recording mode: [SP]
– [DATA CODE]: [DATE/TIME]
– Recording format for DVD-RW: [VIDEO]
• The following menu items return to the
default settings if the POWER switch is set
to OFF (CHG) for more than 12 hours:
– [DVD MENU]
– [FOCUS]
– [SPOT FOCUS]
– [EXPOSURE]
– [SPOT METER]
– [SCENE SELECTION]
– [WHITE BAL.]
– [COLOR SLOW SHTR]
– [S. NIGHTSHOT PLS],
– [BLT-IN ZOOM MIC]
– [MICREF LEVEL]
Continued ,
Troubleshooting
• Attach a charged battery pack to the
camcorder (p. 21).
• Connect the plug of the AC Adaptor to the
wall outlet (wall socket) (p. 21).
Buttons do not work.
101
Troubleshooting (Continued)
Even if you press EASY, menu
settings do not switch to their
defaults automatically.
• Following menu settings remain as they were
set even during Easy Handycam operation
(p. 34).
– [MOVIE MEDIA SET]
– [PHOTO MEDIA SET]*
– [AUDIO MODE]**
– [WIDE SELECT]
– [SUB-T DATE]
– [ INDEX SET]
– [ IMAGE SIZE]
– [FILE NO.]
– [FLASH MODE]**
–[
DISPLAY]
– [VOLUME]
– [BEEP]
– [TV TYPE]
– [CLOCK SET]
– [AREA SET]
– [DST SET]/[SUMMERTIME]
– [ LANGUAGE SET]
– [DEMO MODE]
* DCR-DVD810
**DCR-DVD710/DVD810
The supplied Remote Commander
does not function (DCR-DVD710/
DVD810).
• Set [REMOTE CTRL] to [ON] (p. 89).
• Insert a battery into the battery case with the
+/– polarities correctly matching the +/–
marks (p. 132).
• Remove any obstructions between the
Remote Commander and the remote sensor.
• Point the remote sensor away from strong
light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote
Commander may not function properly.
Another DVD device malfunctions
when you use the supplied Remote
Commander (DCR-DVD710/DVD810).
• Select a commander mode other than DVD 2
for your DVD device, or cover the sensor of
your DVD device with black paper.
Batteries/Power sources
Your camcorder vibrates.
The power abruptly turns off.
• Vibration occurs depending on the condition
of the disc. This is not a malfunction.
• When approximately 5 minutes have elapsed
while you do not operate your camcorder, the
camcorder is automatically turned off
(A.SHUT OFF). Change the setting of
[A.SHUT OFF] (p. 89), or turn on the power
again, or use the AC Adaptor.
• If the time set with [QUICK ON STBY]
(p. 89) has elapsed in sleep mode, your
camcorder turns off automatically. Turn on
your camcorder again.
• Charge the battery pack (p. 21).
A vibration is felt in your hand or a
faint sound is heard during
operation.
• This is not a malfunction.
A motor sound is heard in the
camcorder when the disc cover is
closed without a disc.
• Your camcorder is trying to recognize the
disc. This is not a malfunction.
The CHG (charge) lamp does not
light while the battery pack is being
charged.
Your camcorder gets warm.
• Turn the POWER switch to OFF (CHG)
(p. 21).
• Attach the battery pack to the camcorder
correctly (p. 21).
• This is because the power has been turned on
for a long time. This is not a malfunction.
102
Turn off your camcorder and leave it for a
while in a cool place.
• Connect the power cord (mains lead) to the
wall outlet (wall socket) properly.
• The battery charge is completed (p. 21).
The CHG (charge) lamp flashes while
the battery pack is being charged.
• Attach the battery pack to the camcorder
correctly (p. 21). If the problem persists,
disconnect the AC Adaptor from the wall
outlet (wall socket) and contact your Sony
dealer. The battery pack may be damaged.
The remaining battery time indicator
does not indicate the correct time.
• The ambient temperature is too high or too
low. This is not a malfunction.
• The battery pack has not been charged
enough. Fully charge the battery pack again.
If the problem persists, replace the battery
pack with a new one (p. 21).
• The indicated time may not be correct
depending on the environment of use.
The battery pack is quickly
discharged.
LCD screen/Viewfinder
Menu items are grayed out.
• You cannot select grayed items in the current
recording/playback situation.
• There are some functions you cannot activate
simultaneously (p. 109).
The buttons do not appear on the
touch panel.
• Touch the LCD screen lightly.
• Press DISP/BATT INFO on your camcorder,
or DISPLAY on the Remote Commander
(DCR-DVD710/DVD810) (p. 26, 132).
• Adjust the touch panel ([CALIBRATION],
p. 122).
The image in the viewfinder is not
clear.
• Pull out the viewfinder, then move the
viewfinder lens adjustment lever until the
image appears clearly (p. 27).
The image in the viewfinder has
disappeared.
• Close the LCD panel. No image is displayed
in the viewfinder when the LCD panel is
open (p. 27).
Media
The disc cannot be removed.
• Make sure the power source (battery pack or
AC Adaptor) is connected correctly (p. 21).
• The disc is damaged or is dirty with
fingerprints, etc. In this case, it may take up
to 10 minutes to remove the disc.
• The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
• You turned off your camcorder during
finalizing the disc. Turn on your camcorder
and complete finalizing the disc (p. 67).
Troubleshooting
• The ambient temperature is too high or low.
This is not a malfunction.
• The battery pack has not been charged
enough. Fully charge the battery pack again.
If the problem persists, replace the battery
pack with a new one (p. 21).
The buttons on the touch panel do
not work correctly or do not work at
all.
Images recorded on a disc cannot be
deleted.
• The maximum number of images that you
can delete on the INDEX screen at one time
is 100.
• You cannot delete following movies (p. 51).
– Movies recorded on DVD-R/DVD+R DL
– Movies recorded on DVD-RW (VIDEO
mode) except the last recorded movie
– Movies recorded on DVD+RW except the
last recorded movie
Continued ,
103
Troubleshooting (Continued)
The indicators of the disc type and
the recording format on the LCD
screen are grayed out.
• The disc may have been created on another
device. You can play back the disc with your
camcorder, but you cannot record additional
movies on the disc.
• You inserted a disc that cannot be used with
your camcorder.
• Your camcorder could not recognize the
disc.
You cannot operate functions using
the “Memory Stick PRO Duo.”
• If you use a “Memory Stick PRO Duo”
formatted on a computer, format it again on
your camcorder (p. 72).
You cannot delete images on the
“Memory Stick PRO Duo.”
• The maximum number of images that you
can delete on the INDEX screen at one time
is 100.
• You cannot delete images from the “Memory
Stick PRO Duo” if images are protected by
another device.
The data file name is not indicated
correctly or flashes.
• The file is corrupted.
• The file format is not supported by your
camcorder. Use the supported file format
(p. 118).
Recording
• Your camcorder is recording the image you
have just shot on the media.
• The media has run out of space. Format the
media (internal memory (DCR-DVD810)/
DVD-RW/DVD+RW/“Memory Stick PRO
Duo”) (p. 72). Delete unnecessary images
(p. 51), or use a new disc or “Memory Stick
PRO Duo.”
• When you are using one of the following
discs after finalizing it, make the disc to be
able to record additional movies (p. 74). Or
use a new disc.
– DVD-RW (VIDEO mode)
– DVD+RW
• The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
• Moisture condensation has occurred. Turn
off your camcorder and leave it for about 1
hour (p. 121).
• The number of still images exceeds the
capacity of your camcorder (p. 83, 83).
Delete unnecessary images (p. 51).
You cannot record a still image.
• You cannot record a still image on a disc on
your camcorder.
The ACCESS/access lamp lights up
even when you stop recording.
• Your camcorder is recording the image you
have just record on the media.
The imaging field looks different.
• The imaging field may look different
depending on the condition of your
camcorder. This is not a malfunction.
Refer also to “Media” (p. 103).
Pressing START/STOP or PHOTO
does not record images.
• The playback screen is displayed. Set your
camcorder to recording standby (p. 39).
• You cannot record images in sleep mode.
Cancel sleep mode by pressing QUICK ON
(p. 41).
104
The actual recording time for movie
is less than the expected recording
time of the media.
• Depending on the conditions when recording
a fast moving object or so, the time available
for recording may shorten.
The recording stops.
• The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
• Moisture condensation has occurred. Turn
off your camcorder and leave it about 1 hour
(p. 121).
There is a time difference between
the point where you press START/
STOP and the point that movie
recording starts/stops.
• On your camcorder, there may be a slight
time difference between the point where you
press START/STOP and the actual point that
movie recording starts/stops. This is not a
malfunction.
The movie aspect ratio (16:9/4:3)
cannot be changed.
The auto focus does not function.
• Set [FOCUS] to [AUTO] (p. 92).
• The recording conditions are not suitable for
auto focus. Adjust the focus manually
(p. 92).
[STEADYSHOT] does not function.
• Set [STEADYSHOT] to [ON] (p. 81).
• [STEADYSHOT] may not be able to
compensate for excessive vibrations.
Tiny spots in white, red, blue, or
green appear on the screen.
• The spots appear when you are recording
with [S. NIGHTSHOT PLS] or [COLOR
SLOW SHTR]. This is not a malfunction.
• Set the NIGHTSHOT PLUS switch to OFF
(p. 41).
The screen image is bright, and the
subject does not appear on the
screen.
• Set the NIGHTSHOT PLUS switch to OFF
(p. 41).
The screen image is dark, and the
subject does not appear on the
screen (DCR-DVD710/DVD810).
• Press and hold DISP/BATT INFO for a few
seconds to turn on the backlight (p. 26).
Undesirable flicker occurs.
• This occurs when recording images under a
fluorescent lamp, sodium lamp, or mercury
lamp. This is not a malfunction.
A vertical band appears when
recording candlelight or electric light
in the dark.
• This occurs when the contrast between the
subject and the background is too high.
This is not a malfunction.
Troubleshooting
• You cannot change the movie aspect ratio in
the following cases.
– When [DISC] is selected on [MOVIE
MEDIA SET], you inserted a DVD+RW,
or no disc is inserted.
– When [MEMORY STICK] is selected on
[MOVIE MEDIA SET], no “Memory
Stick PRO Duo” is inserted.
The color of the image is not
correctly displayed.
A vertical white line appears on an
image taken in bright light.
• This phenomenon is called the smear effect.
This is not a malfunction.
Black bands appear when you
record a TV screen or computer
screen.
• Set [STEADYSHOT] to [OFF] (p. 81).
[S. NIGHTSHOT PLS] cannot be
operated.
• Set the NIGHTSHOT PLUS switch to ON
(p. 41).
Continued ,
105
Troubleshooting (Continued)
[COLOR SLOW SHTR] does not
operate correctly.
• [COLOR SLOW SHTR] may not operate
correctly in total darkness. Use NightShot
plus or [S. NIGHTSHOT PLS].
You cannot adjust [LCD BL LEVEL].
• You cannot adjust [LCD BL LEVEL] when:
– The LCD panel is closed on your
camcorder with the LCD screen facing out.
– The power is supplied from the AC
Adaptor.
Playing back images on your
camcorder
You cannot find the images to be
played back.
• Select the media to be played back by
touching
(HOME) t
(MANAGE
MEDIA) t [MOVIE MEDIA SET] or
[PHOTO MEDIA SET] (p. 28).
• Images recorded on other devices may
neither be played back, nor displayed in
actual size. This is not a malfunction
(p. 119).
“
” is indicated on an image in the
VISUAL INDEX screen.
• Loading of the data may have failed. It may
be indicated correctly when you turn off the
power and then turn it on again, or repeat
removing and inserting the “Memory Stick
PRO Duo” a couple of times.
• You removed the battery pack or the AC
Adaptor while the access lamp is flashing.
This operation may damage the image data,
which will be marked with
.
• This may appear on still images recorded on
other devices, edited on a computer, etc.
“
” is indicated on an image in the
VISUAL INDEX screen.
• Perform [REPAIR IMG.DB F.] (p. 76). If it
still appears, delete the image marked with
(p. 51).
You cannot play back a disc.
• Check out the disc compatibility (p. 13).
• Insert a disc with the recording side facing
your camcorder (p. 30).
• The disc that was recorded, formatted, or
finalized on other devices may not be played
back on your camcorder.
• The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The playback image is distorted.
• Clean the disc using a soft cloth (p. 118).
Images stored on a “Memory Stick
PRO Duo” cannot be played back.
• Images cannot be played back if you have
modified files or folders, or have edited the
data on a computer. (The file name flashes
when viewing the still image.) This is not a
malfunction (p. 119).
106
No sound or only a quiet sound is
heard during playback.
• Turn up the volume (p. 45).
• Sound is not output when the LCD screen is
closed. Open the LCD screen.
• When you record sound with [MICREF
LEVEL] set to [LOW] (p. 96), the recorded
sound may be difficult to hear.
Playing back a disc on other
devices
You cannot play back the disc, or the
disc is not recognized.
• Clean the disc using a soft cloth (p. 118).
• Finalize the disc (p. 67).
• A disc recorded in VR mode cannot be
played back on a device that does not support
VR mode. Check the compatibility in the
instruction manual of the playback device.
The playback image is distorted.
• Clean the disc using a soft cloth (p. 118).
“
” is indicated on an image in the
DVD menu.
• Loading of the data may have failed while
finalizing the disc. For the following discs,
make the disc capable of additional
recording (p. 74), then remake the DVD
menu by finalizing the disc again (p. 67).
The DVD menu may be displayed correctly.
– DVD-RW (VIDEO mode)
– DVD+RW
Playback freezes for an instant
between the scenes.
• The image may freeze for an instant between
scenes depending on the device being used.
This is not a malfunction.
• In the case of a DVD+R DL, the image may
freeze for an instant when the recording layer
changes. This is not a malfunction.
• If playback crosses 2 titles made
automatically by your camcorder when .
is pressed, playback may not move to the
previous scene. Select the desired scene from
the menu screen. Refer to the instruction
manual of the playback device for further
information.
When you play the disc on a
computer or another playback
device, the left and right sounds are
heard out of balance (DCR-DVD710/
DVD810).
• This may happen when sound recorded with
5.1ch surround is converted to 2ch (normal
stereo sound) on a computer or another
playback device (p. 40). This is not a
malfunction.
• If the playback device is a 2ch stereo system,
change the audio conversion system
Playing back a “Memory Stick
PRO Duo” on other devices
You cannot play back the “Memory
Stick PRO Duo,” or the “Memory
Stick PRO Duo” is not recognized.
• The device may not support a “Memory
Stick PRO Duo.”
Editing images on your
camcorder
Unable to edit.
• Select a media to be edited by touching
(HOME) t
(MANAGE MEDIA)
t [MOVIE MEDIA SET] or [PHOTO
MEDIA SET] (p. 28).
• You cannot edit movies recorded on DVDR/DVD+R DL (p. 13).
• There are no images recorded.
• Unable to edit because of the condition of the
image.
• You cannot edit an image protected on
another device.
• You cannot dub movies from a disc to the
internal memory (DCR-DVD810) or a
“Memory Stick PRO Duo.”
Troubleshooting
Playback does not move to the
previous scene when you press
..
(downmix system). For details, refer to the
instruction manuals of the playback device.
• When you create a disc using the supplied
“Picture Motion Browser” software, select
2ch for the audio setting.
• Record movies with [AUDIO MODE] set to
[2ch STEREO] on your camcorder (p. 80).
Movies cannot be added in the
Playlist.
• The media is full.
• To a Playlist, you can add 99 movies on the
internal memory (DCR-DVD810) or a
“Memory Stick PRO Duo,” or 999 movies
on a disc (p. 59). Delete unnecessary images
(p. 51).
• You cannot add still images in the Playlist.
Continued ,
107
Troubleshooting (Continued)
Movies cannot be divided.
• A movie that is too short cannot be divided.
• A movie protected on another device cannot
be divided.
Images cannot be deleted.
• You cannot delete following movies (p. 51).
– Movies recorded on DVD-R/DVD+R DL
– Movies recorded on DVD-RW (VIDEO
mode) except the last recorded movie
– Movies recorded on DVD+RW except the
last recorded movie
• In the case of disc, you cannot delete movies
during Easy Handycam operation (p. 34).
• Images protected on another device cannot
be deleted.
Unable to capture a still image from
a movie.
• There is not enough free space on the media
for saving still images (p. 53).
Unable to finalize.
• Use the AC Adaptor for finalizing operation.
Do not use the battery pack.
• The disc has already been finalized. In the
case of following discs, follow the required
procedure to record additional movies
(p. 74):
– DVD-RW (VIDEO mode)
– DVD+RW
You cannot edit or record additional
images on a disc using other
devices.
• You may not be able to edit or record
additional images on a disc recorded on your
camcorder using other devices.
Connecting/Dubbing to other
devices
You cannot hear the sound on the TV
connected to your camcorder.
• This is because only the S VIDEO plug is
connected. Make sure that you connect also
the red and white plugs of the A/V
connecting cable with S VIDEO (optional)
(p. 62).
The aspect ratio of the image is not
correct on the 4:3 TV connected to
your camcorder.
• Set [TV TYPE] depending on your TV
(p. 48).
You cannot dub.
• The A/V connecting cable is not connected
properly. Make sure that the A/V connecting
cable is connected to the proper jack, i.e. to
the input jack of another device for dubbing
a movie from your camcorder (p. 55).
Connecting to a computer
Unable to [UNFINALIZE].
• [UNFINALIZE] is not available for the
following discs:
– DVD-RW (VR mode)
– DVD+RW
– DVD-R
– DVD+R DL
You cannot install “Picture Motion
Browser.”
• Check the computer environment required to
install “Picture Motion Browser.”
• Install “Picture Motion Browser” in an
orderly manner (p. 98).
“Picture Motion Browser” does not
work correctly.
• Finish “Picture Motion Browser” and restart
your computer.
108
Your camcorder is not recognized by
the computer.
• Install “Picture Motion Browser” (p. 98).
• Disconnect devices from the USB jack of the
computer other than the keyboard, mouse,
and your camcorder.
• Disconnect the USB cable from the
computer and your camcorder, and restart the
computer, then connect the computer and
your camcorder again in an orderly manner
(p. 99).
• Make sure the media check tool of the
computer activates. For details on the media
check tool, see “PMB Guide.”
Functions that cannot be used
simultaneously
Cannot use
[SCENE
SELECTION]
NightShot plus,
[S. NIGHTSHOT PLS],
[COLOR SLOW
SHTR], [OLD MOVIE],
[TELE MACRO],
[FADER]
[WHITE BAL.]
NightShot plus,
[S. NIGHTSHOT PLS]
[COLOR SLOW
SHTR]
NightShot plus,
[D.EFFECT], [SCENE
SELECTION],
[FADER]
[S. NIGHTSHOT [D.EFFECT], [FADER]
PLS]
[D.EFFECT], [S.
NIGHTSHOT PLS],
[COLOR SLOW
SHTR], [CANDLE]/
[FIREWORKS] in
[SCENE SELECTION]
Because of following
settings
BACK LIGHT
[SPOT METER],
[FIREWORKS],
[MANUAL] in
[EXPOSURE]
[D.EFFECT]
[S. NIGHTSHOT PLS],
[COLOR SLOW
SHTR], [FADER],
[SCENE SELECTION],
[PICT.EFFECT]
[WIDE
SELECT]
[OLD MOVIE]
[PICT.EFFECT]
[OLD MOVIE]
[MICREF
LEVEL]
[AUTO SLW
SHUTTR]
[S. NIGHTSHOT PLS],
[SCENE SELECTION],
[COLOR SLOW
SHTR], [D.EFFECT],
[FADER]
[BLT-IN ZOOM MIC]
[SPOT FOCUS]
[SCENE SELECTION]
Troubleshooting
[FADER]
The following list shows examples of
unworkable combinations of functions and
menu items.
Cannot use
Because of following
settings
[TELE MACRO] [SCENE SELECTION]
[EXPOSURE]
NightShot plus,
[S. NIGHTSHOT PLS]
[SPOT METER]
NightShot plus,
[S. NIGHTSHOT PLS]
109
Warning indicators and messages
Self-diagnosis display/Warning
indicators
If indicators appear on the LCD screen or in
the viewfinder, check the following.
Some symptoms you can fix by yourself. If
the problem persists even after you have tried
a couple of times, contact your Sony dealer
or local authorized Sony service facility.
C:04:00
E:20:ss / E:31:ss / E:61:ss /
E:62:ss / E:91:ss / E:94:ss
• A malfunction that you cannot service
has occurred. Contact your Sony dealer
or local authorized Sony service
facility. Inform them of the 5-digit
code, which starts from “E.”
101-0001 (Warning indicator
pertaining to files)
Slow flashing
• The file is damaged.
• The file is unreadable.
C: (or E:) ss:ss (Self-diagnosis
display)
C:04:ss
• The battery pack is not an
“InfoLITHIUM” H series battery pack.
Use an “InfoLITHIUM” H series
battery pack (p. 119).
• Connect the DC plug of the AC
Adaptor to the DC IN jack of your
camcorder securely (p. 21).
C:13:ss
• The disc is faulty. Use a compatible
disc with your camcorder (p. 13).
• The disc is dirty or has scratches on it.
Clean the disc with a cleaning cloth
(p. 118).
(Warning indicator pertaining to
discs)
Slow flashing
• A disc is not inserted.*
• Less than 5 minutes remains for
recording movies.
• A disc that cannot be read or written is
inserted, such as the single-sided disc
inserted inside out.
Fast flashing
• Your camcorder cannot recognize the
disc.*
• A finalized disc is inserted into your
camcorder during recording standby.
• The disc is fully recorded.*
• The disc recorded in the different TV
color system from your camcorder is
inserted when
(Movie) is selected.*
C:32:ss
• Symptoms that are not described above
have occurred. Remove the disc and
insert it again, then operate your
camcorder again.
• Remove the power source. Reconnect it
again and operate your camcorder
again.
110
Z (You need to remove the disc)*
Fast flashing
• Your camcorder cannot recognize the
disc.
• The disc is fully recorded.
• An error might have occurred with the
disc drive in your camcorder.
• A finalized disc is inserted during
recording standby (p. 74).
E (Battery level warning)
Slow flashing
• The battery pack is nearly used up.
• Depending on the operating,
environment, or battery conditions, E
may flash, even if there are
approximately 20 minutes remaining.
(High temperature warning)
Slow flashing
• The temperature of your camcorder is
getting higher. Turn off your camcorder
and leave it for a while in a cool place.
Fast flashing*
• The temperature of your camcorder is
extremely high. Turn off your
camcorder and leave it for a while in a
cool place.
(Warning indicator pertaining to
“Memory Stick PRO Duo”)
Slow flashing
Fast flashing*
• There is no free space for recording.
Delete unnecessary images (p. 51), or
format the “Memory Stick PRO Duo”
(p. 72) after dubbing/copying images
(p. 55, 62, 97).
• The image database file is broken (p.
76).
• An incompatible “Memory Stick PRO
Duo” is inserted (p. 118).
- (Warning indicator pertaining
to the write-protect of the “Memory
Stick PRO Duo”)*
• Access to the “Memory Stick PRO
Duo” was restricted on another device.
(Warning indicator pertaining to
camera-shake warning)
• The camcorder is unsteady, so camerashake easily occurs. Hold the
camcorder steady with both hands and
shoot the image. However, note that the
camera-shake warning indicator does
not disappear.
(Warning indicator pertaining to
still image recording)
• The camcorder cannot record a still
image at the moment, because the
camcorder is processing the still image
just recorded. Wait until the camcorder
is ready for recording.
* You hear a melody when the warning indicators
appear on the screen (p. 86).
Troubleshooting
• There is not enough free space for
recording. See page 6 for the type of
“Memory Stick PRO Duo” you can use
in your camcorder.
• No “Memory Stick PRO Duo” is
inserted (p. 32).
(Warning indicator pertaining to
incompatible “Memory Stick PRO
Duo”)*
(Warning indicators pertaining to
“Memory Stick PRO Duo”
formatting)*
• The “Memory Stick PRO Duo” is
damaged.
• The “Memory Stick PRO Duo” is not
formatted correctly (p. 72, 118).
Continued ,
111
Warning indicators and messages (Continued)
Description of warning
messages
If messages appear on the screen, follow the
instructions.
x Media
Internal memory format error.
• The format of the internal memory of
your camcorder has been changed from
the default format. You may be able to
use the internal memory again after
formatting it (p. 72). All the data in the
internal memory will be deleted.
ZRecording on disc disabled.
• A malfunction has occurred with the
disc and the disc cannot be used.
Playback prohibited.
• You are trying to play back an
incompatible disc with your camcorder.
• You are trying to play back an image
recorded with a copyright protection
signal.
Z Need to unfinalize disc.
• To record on the finalized DVD-RW
(VIDEO mode), unfinalize it (p. 74).
Disc error. Remove disc.
• Your camcorder cannot recognize the
disc, because the disc is incompatible
or has scratches.
Z Disc error. Unsupported
format.
• The disc is recorded in the different
format code from your camcorder.
Formatting the disc may enable you to
use the disc on your camcorder (DVDRW/DVD+RW only) (p. 72).
112
Reinsert the Memory Stick.
• Reinsert the “Memory Stick PRO Duo”
a few times. If even then the indicator
flashes, the “Memory Stick PRO Duo”
could be damaged. Try with another
“Memory Stick PRO Duo.”
This Memory Stick is not
formatted correctly.
• Check the format, then format the
“Memory Stick PRO Duo” with your
camcorder if necessary (p. 72).
Memory Stick folders are full.
• You cannot create folders exceeding
999MSDCF. You cannot create or
delete created folders using your
camcorder.
• Format the “Memory Stick PRO Duo”
(p. 72), or delete unnecessary folders
using your computer.
This Memory Stick may not be able
to record or play movies.
• Use the recommended “Memory Stick”
(p. 6).
This Memory Stick may not be able
to record or play images correctly.
• There may be something wrong with
the “Memory Stick PRO Duo.” Insert
the “Memory Stick PRO Duo” again.
Do not eject the Memory Stick during
writing. Data may be damaged.
• Insert the “Memory Stick PRO Duo”
again, and follow the instructions on
the screen.
The Image Database File is
damaged. Do you want to create a
new file?
• The image database file is damaged.
When you touch [YES], a new image
database file is created. The old
recorded images on the “Memory Stick
PRO Duo” cannot be played back
(Image files are not damaged). If you
perform [REPAIR IMG.DB F.] (p. 76)
after creating new image database file,
playing back the old recorded images
may become possible. If it does not
work, copy the image to a computer
using the supplied software.
Inconsistencies found in Image
Database File. Movies cannot be
recorded or played. Do you want to
repair the Image Database File?
• The image database file is damaged.
Touch [YES] to repair.
x PictBridge compliant printer
Not connected to PictBridge
compatible printer.
Data protected.
• The image has been protected with
another device. Cancel the protection
on the device.
Cannot divide.
• You cannot divide a movie that is
extremely short.
Cannot recover data.
• Writing data to the media has failed.
Attempts were made to recover the
data, but they were unsuccessful.
Please wait.
• This is displayed if the disc removal
process takes time. Turn on the
camcorder and leave it for about 10
minutes, preventing vibration.
• Switch off the printer and switch it on
again, then disconnect the USB cable
and reconnect it.
• Switch off the printer and switch it on
again, then disconnect the USB cable
and reconnect it.
x Others
Troubleshooting
Cannot print. Check the printer.
No further selection is possible.
• To a Playlist, you can add 99 movies on
the internal memory (DCR-DVD810)
or a “Memory Stick PRO Duo,” or 999
movies on a disc (p. 59).
• The maximum number of images that
you can select on the INDEX screen at
one time is 100 when:
– deleting images
– dubbing movies
– copying still images
– editing a Playlist
– printing still images
113
Additional Information
Using your camcorder abroad
Power supply
System
You can use your camcorder in any
countries/regions using the AC Adaptor
supplied with your camcorder within the
AC 100 V to 240 V, 50/60 Hz range.
Use a commercially available AC plug
adaptor [a], if necessary, depending on the
design of the wall outlet [b].
AC-L200/L200B
[a]
NTSC
PAL
Australia, Austria, Belgium,
China, Czech Republic,
Denmark, Finland, Germany,
Holland, Hong Kong, Hungary,
Italy, Kuwait, Malaysia, New
Zealand, Norway, Poland,
Portugal, Singapore, Slovak
Republic, Spain, Sweden,
Switzerland, Thailand, United
Kingdom, etc.
[b]
On TV color systems
Your camcorder is an NTSC-system-based
camcorder. If you want to view the
playback image on a TV, it must be an
NTSC-system-based TV with an AUDIO/
VIDEO input jack.
114
Used in
Bahama Islands, Bolivia,
Canada, Central America,
Chile, Colombia, Ecuador,
Guyana, Jamaica, Japan, Korea,
Mexico, Peru, Surinam, Taiwan,
the Philippines, the U.S.A.,
Venezuela, etc.
PAL - M
Brazil
PAL - N
Argentina, Paraguay, Uruguay
SECAM
Bulgaria, France, Guiana, Iran,
Iraq, Monaco, Russia, Ukraine,
etc.
Setting to the local time
You can easily set the clock to the local time by setting a time difference when using your
camcorder abroad. Touch
(HOME) t
(SETTINGS) t [CLOCK/ LANG] t
[AREA SET] and [DST SET] or [SUMMERTIME] (p. 88).
World time difference
Time-zone
differences
Area setting
Time-zone
differences
GMT
Lisbon, London
+11:00
Solomon Is.
+01:00
Berlin, Paris
+12:00
Fiji, Wellington
+02:00
Helsinki, Cairo, Istanbul
–12:00
Eniwetok, Kwajalein
+03:00
Moscow, Nairobi
–11:00
Midway Is., Samoa
+03:30
Tehran
–10:00
Hawaii
+04:00
Abu Dhabi, Baku
–09:00
Alaska
+04:30
Kabul
–08:00
Los Angeles, Tijuana
+05:00
Karachi, Islamabad
–07:00
Denver, Arizona
+05:30
Calcutta, New Delhi
–06:00
Chicago, Mexico City
+06:00
Almaty, Dhaka
–05:00
New York, Bogota
+06:30
Rangoon
–04:00
Santiago
+07:00
Bangkok, Jakarta
–03:30
St. John’s
+08:00
Hong Kong, Singapore, Beijing
–03:00
Brasilia, Montevideo
+09:00
Seoul, Tokyo
–02:00
Fernando de Noronha
+09:30
Adelaide, Darwin
–01:00
Azores, Cape Verde Is.
+10:00
Melbourne, Sydney
Area setting
Additional Information
115
File/folder structure on the internal memory
(DCR-DVD810) and a “Memory Stick PRO Duo”
The file/folder structure is shown below. You do not usually need to acknowledge the file/
folder structure, when recording/playing back images on the camcorder. To enjoy still images
or movies by connecting to a computer, see “PMB Guide” on the supplied CD-ROM, then use
the supplied application.
* Internal memory only (DCR-DVD810)
A Image database files
When you delete the files, you cannot
record/play back the images correctly.
The files are defaulted as hidden files
and not usually displayed.
B Movie files (MPEG2 files)
The extension of the files is “.MPG”.
The maximum size is 2 GB. When the
capacity of a file exceeds 2 GB, the file
becomes divided.
The file numbers go up automatically.
When the capacity of a file number
exceeds 9,999, another folder is created
to record new movie files.
The folder name goes up: [101PNV01]
t [102PNV01]
C Still image files (JPEG files)
The extension of the files is “.JPG”. The
file numbers go up automatically. When
the capacity of a file number exceeds
9,999, another folder is created to store
new image files.
The folder name goes up: [101MSDCF]
t [102MSDCF]
116
• You can access the media in the camcorder from
a computer connected by the USB cable (p. 99).
• Do not modify the files or folders in the
camcorder from a computer. The image files
may be destroyed or may not be played back.
• We (Sony) will not be responsible for the results
of operating the data on the media in the
camcorder from a computer.
• When you delete image files, follow the steps on
page 51. Do not delete the image files on the
media in the camcorder directly from a
computer.
• Do not format the media in the camcorder using
a computer. The camcorder may not operate
correctly.
• Do not copy the files on a “Memory Stick PRO
Duo” in the camcorder from a computer. We
(Sony) will not be responsible for the results of
this kind of operation.
Maintenance and precautions
About the disc
See page 13 for the details of discs
which you can use with your
camcorder.
x Recording on the A side
Place the disc in your camcorder with the
side with the
symbol at the center facing
outwards until it clicks.
symbol
Notes on use
• Hold the disc by its edge while supporting the
center hole lightly. Do not touch the recording
side (the opposite of the printed side when using
a single-sided disc).
• Before shooting, be sure to remove dust and
fingerprints from the disc with a soft cloth.
Otherwise you may not be able to record or play
normally in some situations using that disc.
• When you set the disc in your camcorder, press
firmly until it clicks. When the message
[C:13:ss] appears on the LCD screen, open
the disc cover and set the disc again.
• Do not attach any adhesive material such as a
sticker on the surface of a disc. If you do so, the
disc may become unbalanced, and this may
cause a malfunction of the disc or your
camcorder.
Use of double-sided discs
Double-sided discs allow you to record both sides
of a disc.
• When using a double-sided disc, take care not to
smudge the surface with fingerprints.
• When a double-sided disc is used in your
camcorder, recording/playback are performed
on that side only. You cannot switch to record
on or play back the other side with the disc set to
the camcorder. When recording/playback of one
side is complete, remove the disc and turn it
over to access the other side.
• Perform the following operations on each side
of a double-sided disc:
– Finalizing (p. 67)
– Formatting (p. 72)
– Unfinalizing (p. 74)
Continued ,
Additional Information
Place the
symbol facing outwards.
Recording is made on the rear side.
117
Maintenance and precautions (Continued)
Care and storage of the discs
• Keep the disc clean, or the image quality of the
audio and video output may deteriorate.
• Clean the disc with a soft cloth.
Wipe the disc from the center out. For dirt, clean
the disc with a soft cloth slightly moistened in
water, then remove the moisture with a soft, dry
cloth. Do not use solvents such as benzine,
cleaners intended for vinyl LPs or antistatic
spray, as they may cause a malfunction to the
disc.
• Do not expose the disc to direct sunlight or
leave it in a humid place.
• When you carry or store the disc, put it in its
case.
• When you want to write letters or marks, etc. on
a single-sided disc, write only on the printed
side using an oil-based marker with a felt-tip,
and do not touch the ink until it dries. Do not
heat the disc or use a sharp-pointed tool, such as
ball point pen. Do not dry the surface by
heating. You cannot write, or mark, on doublesided discs.
About the “Memory Stick”
A “Memory Stick” is a compact, portable
IC recording medium with a large data
capacity.
You can use only a “Memory Stick Duo,”
which is about the half size of a standard
“Memory Stick,” with your camcorder.
However, we do not guarantee the
operation of all types of “Memory Stick
Duo” on your camcorder.
Types of “Memory Stick”
118
Recording/
Playback
“Memory Stick Duo”
(with MagicGate)
-
“Memory Stick PRO Duo”
a
“Memory Stick PRO-HG Duo”
a*
* Your camcorder is not compatible with 8-bit
parallel data transfer, but performs 4-bit parallel
data transfer, which is used by a “Memory Stick
PRO Duo.”
• This product cannot record or play data that uses
“MagicGate” technology. “MagicGate” is a
copyright protection technology that records and
transfers the contents in an encrypted format.
• This product is compatible with “Memory Stick
Micro” (“M2”). “M2” is the abbreviation for the
“Memory Stick Micro.”
• A “Memory Stick PRO Duo” formatted by a
computer (Windows OS/Mac OS) does not have
guaranteed compatibility with your camcorder.
• Data read/write speed may vary depending on
the combination of the “Memory Stick PRO
Duo” and the “Memory Stick PRO Duo”
compliant product you use.
• Damaged or lost data may occur in the
following cases (the data will not be
compensated for):
– If you eject the “Memory Stick PRO Duo,” or
turn off your camcorder while your camcorder
is reading or writing image files on the
“Memory Stick PRO Duo” (while the access
lamp is lit or flashing).
– If you use the “Memory Stick PRO Duo” near
magnets or magnetic fields.
• It is recommended you make a back-up of
important data on the hard disk of a computer.
• Be careful not to apply excessive force when
writing on a memo area on a “Memory Stick
PRO Duo.”
• Do not attach a label or the like on a “Memory
Stick PRO Duo” or a Memory Stick Duo
adaptor.
• When you carry or store a “Memory Stick PRO
Duo,” put it in its case.
• Do not touch, or allow metallic objects to come
into contact with the terminals.
• Do not bend, drop or apply strong force to the
“Memory Stick PRO Duo.”
• Do not disassemble or modify the “Memory
Stick PRO Duo.”
• Do not let the “Memory Stick PRO Duo” get
wet.
• Keep the “Memory Stick PRO Duo” out of the
reach of small children. They might accidentally
swallow it.
• Do not insert anything other than a “Memory
Stick PRO Duo” into the Memory Stick Duo
slot. Doing so may cause a malfunction.
• Do not use or keep the “Memory Stick PRO
Duo” in the following locations:
– Places subject to extremely high temperature,
such as a car parked outside in the summer
– Places under direct sunlight
– Places with extremely high humidity or
subject to corrosive gases
x On the Memory Stick Duo adaptor
• When using a “Memory Stick PRO Duo” with a
“Memory Stick” compliant device, be sure to
insert the “Memory Stick PRO Duo” into a
Memory Stick Duo adaptor.
• When inserting a “Memory Stick PRO Duo”
into a Memory Stick Duo adaptor, make sure the
“Memory Stick PRO Duo” is inserted facing in
the correct direction, then insert it all the way in.
Note that improper use may cause a
malfunction. Also, if you force the “Memory
Stick PRO Duo” into the Memory Stick Duo
adaptor in the wrong direction, the “Memory
Stick PRO Duo” may be damaged.
• Do not insert a Memory Stick Duo adaptor
without a “Memory Stick PRO Duo” attached
into a “Memory Stick” compliant device. Doing
so may result in malfunctions of the device.
x On a “Memory Stick PRO Duo”
Notes on using “Memory Stick Micro”
• To use a “Memory Stick Micro” with your
camcorder, you need a Duo-sized M2 Adaptor.
Insert the “Memory Stick Micro” into the Duosized M2 Adaptor, and then insert the adaptor
into the Memory Stick Duo slot. If you insert a
“Memory Stick Micro” into your camcorder
without using a Duo-sized M2 Adaptor, you
might not be able to remove it from your
camcorder.
• Keep the “Memory Stick Micro” out of the
reach of small children. They might accidentally
swallow it.
About the “InfoLITHIUM”
battery pack
Your camcorder operates only with an
“InfoLITHIUM” battery pack (H series).
“InfoLITHIUM” H series battery packs
have the
mark.
What is an “InfoLITHIUM” battery
pack?
An “InfoLITHIUM” battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your
camcorder and an optional AC Adaptor/
charger.
The “InfoLITHIUM” battery pack
calculates the power consumption
according to the operating conditions of
your camcorder, and displays the remaining
battery time in minutes.
With an AC Adaptor/charger, the remaining
battery time and charging time appear.
Additional Information
• Up to 8 GB of “Memory Stick PRO Duo” and
“Memory Stick PRO-HG Duo” are confirmed to
be able to be used with your camcorder.
“Design rule for Camera File system” universal
standard established by the JEITA (Japan
Electronics and Information Technology
Industries Association).
• On your camcorder, you cannot play back still
images recorded on other devices (DCRTRV900 or DSC-D700/D770) that do not
conform to the universal standard. (These
models are not sold in some regions.)
• If you cannot use a “Memory Stick PRO Duo”
that has been used with another device, format it
with your camcorder (p. 72). Note that
formatting erases all information on the
“Memory Stick PRO Duo.”
• You may not be able to play back images with
your camcorder:
– if image data are modified on a computer.
– if image data are recorded with other devices.
On image data compatibility
• Image data files recorded on a “Memory Stick
PRO Duo” by your camcorder conform to the
Continued ,
119
Maintenance and precautions (Continued)
To charge the battery pack
• Be sure to charge the battery pack before you
start using your camcorder.
• We recommend charging the battery pack in an
ambient temperature of between 10 °C to 30 °C
(50 °F to 86 °F) until the CHG (charge) lamp
turns off. If you charge the battery pack outside
of this temperature range, you may not be able
to charge it efficiently.
• After charging is complete, disconnect the AC
Adaptor from the DC IN jack on your
camcorder or remove the battery pack.
To use the battery pack effectively
• Battery pack performance decreases when the
ambient temperature is 10 °C (50 °F) or below,
and the length of time you can use the battery
pack becomes shorter. In that case, do one of the
followings to use the battery pack for a longer
time.
– Put the battery pack in a pocket to warm it up,
and insert it in your camcorder right before
you start taking shots.
– Use a large capacity battery pack: NP-FH70/
NP-FH100 (optional).
• Frequent use of the LCD screen or a frequent
playback, fast forward or reverse operation
wears out the battery pack faster.
We recommend using a large capacity battery
pack: NP-FH70/NP-FH100 (optional).
• Be sure to set the POWER switch to OFF
(CHG) when not recording or playing back on
your camcorder. The battery pack is also
consumed when your camcorder is in recording
standby or playback pause.
• Have spare battery packs ready for 2 or 3 times
the expected recording time, and make trial
recordings.
• Do not expose the battery pack to water. The
battery pack is not water resistant.
About the remaining battery time
indicator
• When the power goes off even though the
remaining battery time indicator indicates that
the battery pack has enough power to operate,
charge the battery pack fully again. Remaining
battery time will be indicated correctly. Note,
however, that the battery indication will not be
restored if it is used in high temperatures for a
long time, or if left in a fully charged state, or
120
when the battery pack is frequently used. Use
the remaining battery time indication as a rough
guide only.
• The E mark that indicates low battery flashes
even if there are still 20 minutes of battery time
remaining, depending on the operating
conditions or ambient temperature.
About storage of the battery pack
• If the battery pack is not used for a long time,
fully charge the battery pack and use it up on
your camcorder once a year to maintain proper
function. To store the battery pack, remove it
from your camcorder and put it in a dry, cool
place.
• To discharge the battery pack on your
camcorder completely, touch
(HOME) t
(SETTINGS) t [GENERAL SET] t
[A.SHUT OFF] t [NEVER] and leave your
camcorder in recording standby until the power
goes off (p. 89).
About battery life
• Battery capacity decreases over time and
through repeated use. If decreased usage time
between charges becomes significant, it is
probably time to replace it with a new one.
• Each battery’s life is governed by storage,
operating and environmental conditions.
About handling of your
camcorder
On use and care
x When not using your camcorder for a
long time
• Periodically turn it on and let it run such as by
playing back or recording images for about 3
minutes.
• Remove a disc from your camcorder.
• Use up the battery pack completely before
storing it.
Moisture condensation
If your camcorder is brought directly from a
cold place to a warm place, moisture may
condense inside your camcorder, on the
surface of the disc, or on the pickup lens.
This may cause a malfunction to your
camcorder.
x If moisture condensation has occurred
Leave your camcorder for about 1 hour
without turning it on.
x Note on moisture condensation
Moisture may condense when you bring
your camcorder from a cold place into a
warm place (or vice versa) or when you use
your camcorder in a humid place as
follows:
Additional Information
• Do not use or store the camcorder and
accessories in the following locations:
– Anywhere extremely hot, cold, or humid.
Never leave them exposed to temperatures
above 60 °C (140 °F), such as under direct
sunlight, near heaters or in a car parked in the
sun. They may malfunction or become
deformed.
– Near strong magnetic fields or mechanical
vibration. The camcorder may malfunction.
– Near strong radio waves or radiation.
The camcorder may not be able to record
properly.
– Near AM receivers and video equipment.
Noise may occur.
– On a sandy beach or anywhere dusty. If sand
or dust gets in your camcorder, it may
malfunction. Sometimes this malfunction
cannot be repaired.
– Near windows or outdoors, where the LCD
screen, the viewfinder, or the lens may be
exposed to direct sunlight. This damages the
inside of the viewfinder or the LCD screen.
• Operate your camcorder on DC 6.8 V/7.2 V
(battery pack) or DC 8.4 V (AC Adaptor).
• For DC or AC operation, use the accessories
recommended in these operating instructions.
• Do not let your camcorder get wet, for example,
from rain or sea water. If your camcorder gets
wet, it may malfunction. Sometimes this
malfunction cannot be repaired.
• If any solid object or liquid gets inside the
casing, unplug your camcorder and have it
checked by a Sony dealer before operating it
any further.
• Avoid rough handling, disassembling,
modifying, physical shock, or impact such as
hammering, dropping or stepping on the
product. Be particularly careful of the lens.
• Keep the POWER switch setting to OFF (CHG)
when you are not using your camcorder.
• Do not wrap your camcorder with a towel, for
example, and operate it. Doing so might cause
heat to build up inside.
• When disconnecting the power cord (mains
lead), pull it by the plug and not the cord.
• Do not damage the power cord (mains lead)
such as by placing anything heavy on it.
• Keep metal contacts clean.
• Keep the Remote Commander and button-type
battery out of children’s reach. If the battery is
accidentally swallowed, consult a doctor
immediately (DCR-DVD710/DVD810).
• If the battery electrolytic liquid has leaked:
– consult your local authorized Sony service
facility.
– wash off any liquid that may have contacted
your skin.
– if any liquid gets in your eyes, wash with
plenty of water and consult a doctor.
• You bring your camcorder from a ski slope into
a place warmed up by a heating device.
• You bring your camcorder from an air
conditioned car or room into a hot place outside.
• You use your camcorder after a squall or a
shower.
• You use your camcorder in a hot and humid
place.
Continued ,
121
Maintenance and precautions (Continued)
x How to prevent moisture condensation
When you bring your camcorder from a
cold place into a warm place, put your
camcorder in a plastic bag and seal it
tightly. Remove the bag when the air
temperature inside the plastic bag has
reached the ambient temperature after about
1 hour.
LCD screen
• Do not exert excessive pressure on the LCD
screen, as it may cause damage.
• If your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
This is not a malfunction.
• While using your camcorder, the back of the
LCD screen may heat up. This is not a
malfunction.
x To clean the LCD screen
If fingerprints or dust make the LCD screen
dirty, it is recommended you use a soft
cloth to clean it. When you use the LCD
Cleaning Kit (optional), do not apply the
cleaning liquid directly to the LCD screen.
Use cleaning paper moistened with the
liquid.
x On adjustment of the touch panel
(CALIBRATION)
The buttons on the touch panel may not
work correctly. If this happens, follow the
procedure below. It is recommended that
you connect your camcorder to the wall
outlet (wall socket) using the supplied AC
Adaptor during the operation.
1 Turn on your camcorder.
2 Touch
(HOME) t
t [GENERAL SET] t
[CALIBRATION].
(SETTINGS)
3 Touch “×” displayed on the screen 3 times
with the corner of a “Memory Stick PRO
122
Duo” or the like. The position of “×”
changes.
Touch [CANCEL] to cancel.
If you did not press the right spot, try the
calibration again.
b Notes
• Do not use a sharp-pointed object for
calibration. Doing so may damage the LCD
screen.
• You cannot calibrate the LCD screen if it is
rotated, or closed with the screen facing out.
On handling the casing
• If the casing is soiled, clean the camcorder body
with a soft cloth lightly moistened with water,
and then wipe the casing with a dry soft cloth.
• Avoid the following to avoid damage to the
finish:
– Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent, insecticide
and sunscreen
– Handling the camcorder with above
substances on your hands
– Leaving the casing in contact with rubber or
vinyl objects for a long period of time
On the pickup lens
• Do not touch the lens inside the disc cover.
Keep the disc cover closed except when
inserting and removing the disc, to keep dust
out.
• When your camcorder does not work because
the pickup lens is dirty, clean it with a camera
blower (optional). Do not touch the pickup lens
directly during cleaning, because this may cause
the camcorder to malfunction.
Pickup lens
About care and storage of the lens
4 Press the viewfinder onto the body of the
camcorder.
5 Remove dust from the inside area where
the eyecup block was attached with a
camera blower, etc.
6 Attach the eyecup block to the viewfinder,
pushing it straight on until it clicks.
Cleaning inside the viewfinder
Remove any dust from inside the
viewfinder by following the steps below.
1 Pull out the viewfinder.
2 While pushing in the tab on the bottom of
the viewfinder with a fine-tipped object
such as a ball point pen, pull the eyecup
block in the direction of the arrow to
remove.
Additional Information
• Wipe the surface of the lens clean with a soft
cloth in the following instances:
– When there are fingerprints on the lens
surface.
– In hot or humid locations
– When the lens is exposed to salty air such as
at the seaside.
• Store in a well-ventilated location subject to
little dirt or dust.
• To prevent mold, periodically clean the lens as
described above. It is recommended that you
operate your camcorder about once a month to
keep it in optimum state for a long time.
3 Remove dust from the eyecup block with a
camera blower, etc.
b Notes
• The eyecup block is a precision part. Do not
disassemble it further.
• Do not touch the lens of the eyecup block.
Continued ,
123
Maintenance and precautions (Continued)
On charging the pre-installed
rechargeable battery
Your camcorder has a pre-installed
rechargeable battery to retain the date, time,
and other settings even when the POWER
switch is set to OFF (CHG). The preinstalled rechargeable battery is always
charged while your camcorder is connected
to the wall outlet (wall socket) via the AC
Adaptor or while the battery pack is
attached. The pre-installed rechargeable
battery will be fully discharged in about 3
months if you do not use your camcorder
at all. Use your camcorder after charging
the pre-installed rechargeable battery.
However, even if the pre-installed
rechargeable battery is not charged, the
camcorder operation will not be affected as
long as you are not recording the date.
x Procedures
Connect your camcorder to a wall outlet
(wall socket) using the supplied AC
Adaptor, and leave it with the POWER
switch set to OFF (CHG) for more than 24
hours.
124
Specifications
System
Video compression format
MPEG2/JPEG (Still images)
Audio compression format
DCR-DVD610
Dolby Digital 2ch
Dolby Digital Stereo Creator
DCR-DVD710/DVD810
Dolby Digital 2/5.1ch
Dolby Digital 5.1 Creator
Video signal
NTSC color, EIA standards
Internal memory (DCR-DVD810)
8 GB
When measuring media capacity, 1 GB equals
1 billion bytes, a portion of which is used for
data management.
Usable discs
8 cm DVD-RW/DVD+RW/DVD-R/
DVD+R DL
Movie recording format
Internal memory (DCR-DVD810)
MPEG2-PS
Disc
DVD-RW: DVD-VIDEO (VIDEO mode),
DVD-Video Recording (VR mode)
DVD+RW: DVD+RW Video
DVD-R/DVD+R DL: DVD-VIDEO
Still image recording format
Exif Ver.2.2*
Viewfinder
Electric viewfinder (color)
Image device
DCR-DVD610
2.25 mm (1/8 type) CCD (Charge Coupled
Device)
Gross:
Approx. 680 000 pixels
Effective (Movie, 16:9)
Approx. 410 000 pixels
Effective (Still, 16:9)
Approx. 250 000 pixels
Effective (Still, 4:3)
Approx. 340 000 pixels
Lens
Carl Zeiss Vario-Tessar
DCR-DVD610
Optical: 40×, Digital: 80×, 2 000×
DCR-DVD710/DVD810
Optical: 25×, Digital: 50×, 2 000×
Filter diameter: 30 mm (1 3/16 in.)
Focal length
DCR-DVD610
F 1.8 - 4.1
f = 1.9 - 76 mm (3/32 - 3 in.)
When converted to a 35 mm still camera
For movies:
41 - 1 640 mm (1 5/8 - 64 5/8 in.) (16:9)
For still images:
48 - 1 920 mm (1 15/16 - 75 5/8 in.) (4:3)
DCR-DVD710/DVD810
F 1.8 - 3.2
f = 2.5 - 62.5 mm (1/8 - 2 1/2 in.)
When converted to a 35 mm still camera
For movies:
41 - 1 189 mm (1 5/8 - 46 7/8 in.) (16:9)**
For still images:
36 - 900 mm (1 7/16 - 35 1/2 in.) (4:3)
Color temperature
[AUTO], [ONE PUSH], [INDOOR]
(3 200 K), [OUTDOOR] (5 800 K)
Continued ,
Additional Information
“Memory Stick PRO Duo”
MPEG2-PS
DCR-DVD710/DVD810
3 mm (1/6 type) CCD (Charge Coupled
Device)
Gross:
Approx. 1 070 000 pixels
Effective (Movie, 16:9)
Approx. 670 000 pixels
Effective (Still, 16:9)
Approx. 750 000 pixels
Effective (Still, 4:3)
Approx. 1 000 000 pixels
125
Specifications (Continued)
Minimum illumination
DCR-DVD610
6 lx (lux) (AUTO SLW SHUTTR ON, Shutter
speed 1/30 second)
0 lx (lux) (during NightShot plus function)
DCR-DVD710/DVD810
8 lx (lux) (AUTO SLW SHUTTR ON, Shutter
speed 1/30 second)
0 lx (lux) (during NightShot plus function)
* “Exif” is a file format for still images,
established by the JEITA (Japan Electronics and
Information Technology Industries
Association). Files in this format can have
additional information such as your camcorder’s
setting information at the time of recording.
**The focal length figures are actual figures
resulting from wide angle pixel readout.
• Manufactured under license from Dolby
Laboratories.
Input/Output connectors
A/V Remote Connector
Video/audio output jack
USB jack
mini-B
LCD screen
Picture
6.7 cm (2.7 type, aspect ratio 16:9)
Total number of pixels
123 200 (560 × 220)
General
Power requirements
DC 6.8 V/7.2 V (battery pack)
DC 8.4 V (AC Adaptor)
Average power consumption
Using the LCD screen or the viewfinder with
normal brightness
DCR-DVD610
LCD: 2.9 W
Viewfinder: 2.7 W
DCR-DVD710
LCD: 3.3 W
Viewfinder: 2.9 W
DCR-DVD810
LCD: 2.9 W
Viewfinder: 2.5 W
Operating temperature
0 °C to +40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (Approx.)
55 × 89 × 130 mm (2 1/4 × 3 5/8 × 5 1/8 in.)
(w×h×d) including the projecting parts
55 × 89 × 130 mm (2 1/4 × 3 5/8 × 5 1/8 in.)
(w×h×d) including the projecting parts with
the rechargeable battery pack NP-FH40
attached
Mass (Approx.)
DCR-DVD610
390 g (13 oz) main unit only
440 g (15 oz) including the rechargeable
battery pack NP-FH40 and a disc
DCR-DVD710
400 g (14 oz) main unit only
450 g (15 oz) including the rechargeable
battery pack NP-FH40 and a disc
DCR-DVD810
400 g (14 oz)main unit only
445 g (15 oz) including the rechargeable
battery pack NP-FH40
Supplied accessories
See page 20.
126
On trademarks
Power requirements
• “Handycam” and
are registered trademarks of Sony Corporation.
• “Memory Stick,”
, “Memory Stick
Duo,” “
,” “Memory Stick
PRO Duo,” “
,”
“Memory Stick PRO-HG Duo,”
“
,” “Memory Stick
Micro,” “MagicGate,” “
,”
“MagicGate Memory Stick” and “MagicGate
Memory Stick Duo” are trademarks or
registered trademarks of Sony Corporation.
• “InfoLITHIUM” is a trademark of Sony
Corporation.
• DVD-RW, DVD+RW, DVD-R, and DVD+R
DL logo are trademarks.
• Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
• Dolby Digital Stereo Creator and Dolby Digital
5.1 Creator are trademarks of Dolby
Laboratories.
• Microsoft, Windows, Windows Media,
Windows Vista and DirectX are either
registered trademarks or trademarks of
Microsoft Corporation in the United States and/
or other countries.
• Macintosh and Mac OS are registered
trademarks of Apple Inc. in the U.S. and other
countries.
• Intel, Intel Core, and Pentium are trademarks or
registered trademarks of Intel Corporation or its
subsidiaries in the United States and other
countries.
• Adobe, the Adobe logo, and Adobe Acrobat are
either registered trademarks or trademarks of
Adobe Systems Incorporated in the United
States and/or other countries.
AC 100 V - 240 V, 50/60 Hz
Current consumption
0.35 A - 0.18 A
Power consumption
18 W
Output voltage
DC 8.4 V*
Operating temperature
0 °C to +40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (Approx.)
48 × 29 × 81 mm (1 15/16 × 1 3/16 × 3 1/4 in.)
(w×h×d) excluding the projecting parts
Mass (Approx.)
170 g (6 oz) excluding the power cord (mains
lead)
* See at the label of the AC Adaptor for other
specifications.
Rechargeable battery pack NP-FH40
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
4.9 Wh (680 mAh)
Type
Li-ion
Design and specifications are subject to change
without notice.
All other product names mentioned herein may be
the trademarks or registered trademarks of their
respective companies. Furthermore, ™ and ® are
not mentioned in each case in this manual.
Continued ,
Additional Information
AC Adaptor AC-L200/L200B
127
Specifications (Continued)
Notes on the License
ANY USE OF THIS PRODUCT OTHER THAN
CONSUMER PERSONAL USE IN ANY
MANNER THAT COMPLIES WITH THE
MPEG-2 STANDARD FOR ENCODING
VIDEO INFORMATION FOR PACKAGED
MEDIA IS EXPRESSLY PROHIBITED
WITHOUT A LICENSE UNDER APPLICABLE
PATENTS IN THE MPEG-2 PATENT
PORTFOLIO, WHICH LICENSE IS
AVAILABLE FROM MPEG LA, L.L.C., 250
STEELE STREET, SUITE 300, DENVER,
COLORADO 80206.
“C Library,” “Expat,” “zlib,” and “libjpeg”
software are provided in your camcorder. We
provide this software based on license agreements
with their owners of copyright. Based on requests
by the owners of copyright of these software
applications, we have an obligation to inform you
of the following. Please read the following
sections.
Read “license1.pdf” in the “License” folder on the
CD-ROM. You will find licenses (in English) of
“C Library,” “Expat,” “zlib,” and “libjpeg”
software.
On GNU GPL/LGPL applied software
The software that is eligible for the following
GNU General Public License (hereinafter referred
to as “GPL”) or GNU Lesser General Public
License (hereinafter referred to as “LGPL”) are
included in the camcorder.
This informs you that you have a right to have
access to, modify, and redistribute source code for
these software programs under the conditions of
the supplied GPL/LGPL.
Source code is provided on the web. To
download, go to the following website and select
DCR-DVD810.
http://www.sony.net/Products/Linux/
We would prefer you do not contact us about the
contents of source code.
Read “license2.pdf” in the “License” folder on the
CD-ROM. You will find licenses (in English) of
“GPL,” and “LGPL” software.
To view the PDF, Adobe Reader is needed. If it is
not installed on your computer, you can download
it from the Adobe Systems web page:
http://www.adobe.com/
128
Quick Reference
Identifying parts and controls
The numbers in ( ) are reference pages.
A NIGHTSHOT PLUS switch (41)
B Memory Stick Duo slot/cover and
access lamp (32)
The access lamp lights for both the
internal memory* and a “Memory Stick
PRO Duo.”
P DISP/BATT INFO button (22)
* DCR-DVD810
C LCD screen/touch panel (17, 26)
D
(HOME) button (18, 78)
E Zoom buttons (40, 46)
F START/STOP button (34, 39)
Quick Reference
G RESET button
Initializes all the settings, including the
setting of the date and time.
H QUICK ON button and lamp (41)
I EASY button (34)
J Viewfinder lens adjustment lever (27)
K . (BACK LIGHT) button (41)
L Speaker
Playback sounds come out from the
speaker. For how to adjust the volume,
see page 45.
M
N
(USB) jack (64)
(VIEW IMAGES) button (35, 43)
O DUBBING button* (55)
Continued ,
129
Identifying parts and controls (Continued)
A POWER switch (25)
B Viewfinder (27)
C CHG (charge) lamp (21)
D
(Movie)/
(Still) mode lamps (25)
E Battery pack (21)
F Built-in microphone (40)
An Active Interface Shoe* compatible
microphone (optional) will take
precedence when connected.
G Power zoom lever (40, 46)
H PHOTO button (34, 39)
I DC IN jack (21)
J START/STOP button (34, 39)
K Tripod receptacle
Attach the tripod (optional: the length of
the screw must be less than 5.5 mm
(7/32 in.)) to the tripod receptacle using
a tripod screw.
L BATT (battery) release lever (22)
* DCR-DVD710/DVD810
130
A Active Interface Shoe
*
The Active Interface Shoe supplies
power to optional accessories such as a
video light, a flash, or a microphone.
The accessory can be turned on or off as
you operate the POWER switch on your
camcorder. Refer to the operating
instructions supplied with your
accessory for details.
G Infrared port/Remote sensor*
Point the Remote Commander* (p. 132)
towards the remote sensor to operate
your camcorder.
H LENS COVER switch (26)
I A/V Remote Connector (48, 62)
Connect other optional accessories.
* DCR-DVD710/DVD810
Quick Reference
The Active Interface Shoe has a safety
device for fixing the installed accessory
securely. To connect an accessory, press
down and push it to the end, and then
tighten the screw. To remove an
accessory, loosen the screw, and then
press down and pull out the accessory.
F Lens (Carl Zeiss Lens) (7)
• When you are recording movies with an
external flash (optional) connected to the
accessory shoe, turn off the power of the
external flash to prevent charging noise
being recorded.
• When an external microphone (optional) is
connected, it takes precedence over the
built-in microphone (p. 40).
B Disc cover (30)
C Hook for a shoulder belt
Attach a shoulder belt (optional).
D Grip belt (27)
E Disc cover OPEN switch and ACCESS
lamp (30)
Continued ,
131
Identifying parts and controls (Continued)
Remote Commander (DCR-DVD710/
DVD810)
screen. Select a desired button or an item with
b / B / v / V, then press ENTER to enter.
b Notes
• Remove the insulation sheet before using the
Remote Commander.
Insulation sheet
• Point the Remote Commander towards the remote
sensor to operate your camcorder (p. 131).
• When no commands have been sent from the
Remote Commander in a certain period, the
orange frame disappears. When you press any of
b / B / v / V, or ENTER again, the frame appears
at the position where it was displayed last.
• You cannot select some buttons on the LCD
screen using b / B / v / V.
A DATA CODE button (84)
Displays the date and time or camera setting
data of the recorded images when you press this
during playback.
B PHOTO button (34, 39)
The on-screen image when you press this
button will be recorded as a still image.
C SCAN/SLOW buttons (35, 44)
D . > (Previous/Next) buttons (35,
44)
To change the battery of the Remote
Commander
1 While pressing on the tab, inset your
fingernail into the slit to pull out the battery
case.
2 Place a new battery with the + side facing
up.
3 Insert the battery case back into the Remote
Commander until it clicks.
E PLAY button (35, 44)
F STOP button (35, 44)
Tab
G DISPLAY button (22)
H Transmitter
WARNING
I START/STOP button (34, 39)
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in
fire.
J Power zoom buttons (40, 46)
K PAUSE button (35, 44)
L VISUAL INDEX button (35, 43)
Displays a VISUAL INDEX screen when you
press this during playback.
M b / B / v / V / ENTER buttons
When you press any button on the VISUAL
INDEX/Face Index/Film Roll Index/Playlist
screen, the orange frame appears on the LCD
132
• When the lithium battery becomes weak, the
operating distance of the Remote Commander
may shorten, or the Remote Commander may
not function properly. In this case, replace the
battery with a Sony CR2025 lithium battery.
Use of another battery may present a risk of fire
or explosion.
Indicators displayed during recording/playback
Recording movies
A HOME button (18, 78)
B Remaining battery (approx.) (22)
C Recording status ([STBY] (standby) or
[REC] (recording))
D Recording mode (HQ/SP/LP) (80)
E Media type (13)
F Counter (hour/minute/second)
G OPTION button (19, 90)
Recording still images
H Remaining recordable time of movies
I Audio mode (80) (DCR-DVD710/
DVD810)
J Face Index set (82)
K VIEW IMAGES button (35, 43)
L Image size (82)
M Remaining recordable number of still
images (83, 83)
Viewing movies
N Recording folder
When [PHOTO MEDIA SET] is
[MEMORY STICK]
O Return button
P Playback mode
Q Current movie number/Total number of
recorded movies
When [MOVIE MEDIA SET] is [INT.
MEMORY] (DCR-DVD810) or
[MEMORY STICK]
Viewing still images
S Video operation buttons (35, 44)
T Data file name/Scene number
U Current still image number/Total
number of recorded still images
Quick Reference
R Previous/Next button (35, 44)
V Playback folder
When [PHOTO MEDIA SET] is
[MEMORY STICK]
W Slide show button (47)
X VISUAL INDEX button (35, 43)
Continued ,
133
Indicators displayed during recording/playback (Continued)
Indicators when you made
changes
Indicator
Meaning
E
Warning (110)
Following indicators appear during
recording/playback to indicate the settings
of your camcorder.
Upper left
Upper right
PictBridge connecting
(64)
Bottom
Indicator
Meaning
Face Index set (82)
Manual focus (92)
9
Bottom
Upper left
Indicator
White balance (94)
Audio mode (80)
SteadyShot off (81)
Digital effect (96)
WIDE SELECT (80)
Tele macro (92)
Flash (83, 84)
EXPOSURE (93)/
SPOT METER (93)
Upper right
Picture effect (96)
z Tips
• The contents and positions of the indicators
illustrated here may differ from the actual
indicators on the screen of your camcorder.
Some indicators do not appear depending on the
model.
Meaning
LCD backlight off (26)
Fader (95)
Center
Meaning
NightShot plus (41)
Color Slow Shutter (95)
Super NightShot plus
(95)
134
n
MICREF LEVEL low
(96)
BLT-IN ZOOM MIC
(96)
Indicator
Backlight (41)
.
Meaning
Self-timer recording (96)
Indicator
SCENE SELECTION
(93)
Center
Data code during recording
The recording date, time, and camera
setting data are recorded automatically on
the media. They are not displayed while
recording. However, you can check them as
[DATA CODE] during playback (p. 84).
You can view the recording date and time
on another device, etc. ([SUB-T DATE],
p. 82).
Glossary
x 5.1ch surround sound
x VIDEO mode
A system that plays back sound on 6 speakers, 3 at
the front (left, right and center) and 2 at the rear
(right and left) with an additional low-pass
subwoofer counted as a 0.1 channel for
frequencies of 120 Hz or lower.
One of the recording formats you can select when
using a DVD-RW. VIDEO mode provides
excellent compatibility with other DVD devices.
x Dolby Digital
One of the recording formats you can select when
using a DVD-RW. VR mode enables editing
(deleting or sequence rearrangement) with your
camcorder. Finalizing the disc lets you play it
back on a VR mode compatible DVD device.
An audio encoding (compression) system
developed by Dolby Laboratories Inc.
x VR mode
x Dolby Digital 5.1 Creator
Sound compression technology developed by
Dolby Laboratories Inc. which compresses audio
efficiently while preserving high sound quality. It
enables recording of 5.1ch surround sound while
using disc space more efficiently. Discs created
by Dolby Digital 5.1 Creator can be played back
on a device compatible with the disc created on
your camcorder.
x JPEG
JPEG stands for Joint Photographic Experts
Group, a still image data compression (data
capacity reduction) standard. Your camcorder
records still images in JPEG format.
x MPEG
MPEG stands for Moving Picture Experts Group,
the group of standards for the coding (image
compression) of video (movie) and audio. There
are MPEG1 and MPEG2 formats. Your
camcorder records movies in MPEG2 format.
Reduced-size images which enable you to view
many images at the same time. [VISUAL
INDEX], [
INDEX], [
INDEX], etc. are
thumbnail display system.
Quick Reference
x Thumbnail
x VBR
VBR stands for Variable Bit Rate, the recording
format for automatically controlling the bit rate
(the volume of recording data in a given time
segment) according to the scene being recorded.
For fast-moving video, a lot of media space is
used to produce a clear image, so the recording
time to the media shortens.
135
Index
Numeric
CLOCK/LANG.................... 88
E
12IMAGES...........................85
COLOR SLOW SHTR (Color
Slow Shutter) ............... 95, 109
Easy Handycam operation....34
16:9.......................................48
16:9 WIDE ...........................31
4:3...................................31, 48
Computer ............................. 97
Connecting
Printer ........................... 64
5.1ch surround recording......40
TV................................. 48
5.1ch surround sound ...........40
Editing ..................................50
EXPOSURE .................93, 109
F
Face Index ......................45, 82
6IMAGES.............................85
VCR or DVD/HDD
recorders ....................... 62
8cm DVD .............................13
Copying still images ............ 56
A
D
Finalize ......................... 67, 108
AC Adaptor ..........................21
DATA CODE ...................... 84
FIREWORKS....................... 93
Additional recording.............74
Date Index............................ 46
FLASH LEVEL....................83
AREA SET ...........................88
DATE/TIME.......... 26, 84, 134
FLASH MODE ....................83
Aspect ratio...........................48
DC IN jack ........................... 21
FOCUS ......................... 92, 105
AUDIO MODE ....................80
DC plug................................ 21
FORMAT
AUTO SLW SHUTTR (Auto
slow shutter) .................81, 109
DELETE
FADER......................... 95, 109
FILE NO. (File number)....... 83
Film Roll Index ....................45
A.SHUT OFF (Auto shut off)
..............................................89
A/V connecting cable .....48, 62
Disc ............................... 72
Movies .......................... 51
Internal memory............ 72
Still images ................... 52
“Memory Stick PRO Duo”
....................................... 72
DEMO MODE..................... 88
DIGITAL ZOOM ................ 81
B
Disc ...................................... 30
BACK LIGHT..............41, 109
DISC SELECT GUIDE ....... 75
Battery ..........................21, 132
DISP OUTPUT .................... 87
Battery Info...........................22
DISPLAY............................. 85
BEACH ................................94
DIVIDE
BEEP ....................................86
Original......................... 58
BLACK FADER ..................95
Playlist .......................... 61
BLT-IN ZOOM MIC............96
Dolby Digital 5.1 Creator .. 135
Button-type lithium battery
............................................132
Double-sided disc .............. 117
B&W ....................................96
Dubbing movies............. 55, 62
G
GENERAL SET ................... 88
Grip belt................................ 27
GUIDEFRAME....................81
H
HOME MENU ...............17, 78
CLOCK/LANG.............88
GENERAL SET............ 88
MOVIE SETTINGS...... 80
DST SET.............................. 88
OUTPUT SETTINGS... 87
PHOTO SETTINGS ..... 82
DVD drive............................ 70
C
DVD menu ........................... 69
CALIBRATION.................122
DVD-R................................. 13
CAMERA DATA.................84
DVD-RW ............................. 13
CANDLE..............................93
DVD+R DL.......................... 13
CD-ROM ..............................97
DVD+RW ............................ 13
Charging time .......................22
D.EFFECT (Digital effect)
..................................... 96, 109
CLOCK SET ........................25
136
SOUND/DISP SET....... 86
VIEW IMAGES SET....84
HQ ........................................ 80
I
ID-1/ID-2.............................. 49
IMAGE SIZE ....................... 82
INDEX SET (Face Index set)
..............................................82
NightShot plus...................... 41
Indicators ............................134
Number of still images
recordable............................. 83
INDOOR...............................94
NTSC ................................. 114
InfoLITHIUM.....................119
QUICK ON...........................41
QUICK ON STBY ...............89
R
Install (software)...................97
O
Insulation sheet ...................132
OLD MOVIE ....................... 96
ONE PUSH .......................... 94
J
OPTION MENU .................. 90
JPEG ...................................135
Original
DELETE ....................... 51
L
Q
DIVIDE......................... 58
REC MODE (Recording mode)
..............................................80
Recording .......................34, 38
Recording format..................13
Recording time .........14, 22, 33
REDEYE REDUC................84
Remaining battery ................22
LANDSCAPE.......................94
OTHERS category ............... 50
LANGUAGE SET ................88
OUTDOOR .......................... 94
REMAINING SET (Remaining
media display setting)...........81
LAST SCENE DEL (delete)
..............................................52
OUTPUT SETTINGS .......... 87
Remote Commander ...102, 132
LCD backlight ......................27
P
LCD BL LEVEL (LCD back
light level).....................86, 106
PAL .................................... 114
LCD BRIGHT ......................86
LCD COLOR........................86
LCD panel.............................26
Lens cover.............................26
REMOTE CTRL ..................89
REPAIR IMG.DB F. ............76
PASTEL ............................... 96
S
PHOTO COPY..................... 56
S video cable...................48, 62
PHOTO SETTINGS ............ 82
SCENE SELECTION
......................................93, 109
PictBridge............................. 64
PICT.EFFECT (Picture effect)
...................................... 96, 109
Self-diagnosis display.........110
Playback ......................... 35, 43
SEPIA ...................................96
Playback zoom ..................... 46
SETTINGS category ............78
Maintenance........................117
Playing time ......................... 23
Slide show ............................47
MANAGE MEDIA category
..............................................66
Playlist
SNOW ..................................94
LP..........................................80
M
SELF-TIMER .......................96
SOUND SETTINGS ............79
Divide............................ 61
SOUND/DISP SET ..............86
Erase.............................. 60
SP..........................................80
MICREF LEVEL..........96, 109
Move ............................. 61
Specifications .....................125
Mirror mode..........................41
Playback........................ 60
SPORTS (Sports lesson).......94
Moisture condensation........121
PORTRAIT .......................... 94
SPOT FOCUS ..............92, 109
MOVIE DUB........................55
Power cord (mains lead) ...... 21
MOVIE SETTINGS .............80
Precautions ......................... 117
SPOT METER (Flexible spot
meter)............................93, 109
Movies ............................34, 39
Preparation ........................... 21
SPOTLIGHT ........................94
MPEG .................................135
Print ...................................... 64
STEADYSHOT ....................81
Protect ................................ 113
Still Images .....................34, 39
“Memory Stick”..............6, 118
“Memory Stick PRO Duo”
..................................6, 32, 118
N
NIGHTSHOT LIGHT ..........80
Quick Reference
Creating......................... 59
SUB-T DATE .......................82
SUMMERTIME ...................88
Continued ,
137
Index (Continued)
SUNRISE&SUNSET ...........93
S.NIGHTSHOT PLS (Super
NightShot plus).............95, 109
T
TELE MACRO.............92, 109
Tripod .................................130
TV color system .................114
TV TYPE........................48, 87
TWILIGHT ..........................93
U
UNFINALIZE ..............74, 108
USB 2.0 ................................97
USB cable.......................64, 98
Using abroad.......................114
V
VBR......................................14
VF B.LIGHT (Viewfinder
backlight)..............................86
VIDEO mode........................13
VIEW IMAGES SET ...........84
VISUAL INDEX ............35, 43
VOLUME.......................45, 86
VR mode...............................13
W
Warning indicators .............110
Warning messages..............112
WHITE BAL. (White balance)
......................................94, 109
WHITE FADER ...................95
WIDE SELECT............80, 109
Windows...............................97
World time difference ........115
Z
Zoom ....................................40
ZOOM LINK........................85
138
Spanish Quick Guide/Guía rápida en español
Paso 1: Comprobación de los componentes
incluidos
Asegúrese de que dispone de los siguientes
componentes incluidos con su videocámara.
El número entre paréntesis indica el número
de componentes incluidos de cada artículo.
Batería recargable NP-FH40 (1)
Adaptador de ca (1)
CD-ROM “Handycam Application
Software” (1)
– Picture Motion Browser (software)
– Guía de PMB
Cable de alimentación (1)
Cable de conexión de A/V (1)
Cable USB (1)
Control remoto inalámbrico (DCRDVD710/DVD810) (1)
La pila de litio tipo botón ya viene instalada.
140
Guía de operaciones (este manual) (1)
Paso 2: Recarga de la batería
Interruptor POWER
Toma DC
IN
Batería
Indicador CHG
(carga)
Adaptador de ca
Clavija de cc
Cable de alimentación
Puede recargar la batería
“InfoLITHIUM” (serie H) después de
colocarla en la videocámara.
b Notas
• La videocámara funciona sólo con una
batería “InfoLITHIUM” (serie H).
1 Deslice el interruptor POWER en
el sentido de la flecha hasta la
posición OFF (CHG) (ajuste
predeterminado).
2 Instale la batería deslizándola en
el sentido de la flecha hasta que
haga clic.
3 Conecte el adaptador de ca a la
toma DC IN de la videocámara.
Al tomacorriente de
pared
Haga coincidir la marca v de la clavija
de cc con la marca v de la videocámara.
4 Conecte el cable de alimentación
al adaptador de ca y al
tomacorriente de pared.
El indicador CHG (carga) se enciende y
se inicia el proceso de recarga.
Spanish Quick Guide/Guía rápida en español
Tapa de la toma
5 El indicador CHG (carga) se
apaga cuando la batería está
completamente cargada.
Desconecte el adaptador de ca de
la toma DC IN.
b Notas
• Desconecte el adaptador de ca de la toma DC IN
mientras sujeta la videocámara y la clavija de cc
Abra la tapa de la toma y conecte la
clavija de cc en el adaptador de ca
Continúa ,
141
Paso 2: Recarga de la batería (Continuación)
Para extraer la batería
1 Deslice el interruptor POWER hacia la
posición OFF (CHG).
nuevo DISP/BATT INFO mientras aparece
dicha información.
Energía restante de la batería (aprox.)
2 Deslice la palanca de liberación BATT
(batería) (1) y extraiga la batería (2).
Palanca de
liberación BATT
(batería)
b Notas
• Antes de extraer la batería o el adaptador de ca
compruebe que el indicador
(Película)/
(Imagen fija)/ indicador ACCESS/indicador de
acceso estén apagados.
• Descargue la batería completamente antes de
guardarla por un periodo extenso.
Para usar un tomacorriente de pared
como fuente de alimentación
Realice las mismas conexiones que cuando
recarga la batería. La batería no se
descargará en ese caso.
Comprobación de la energía restante
de la batería (Battery Info)
Ajuste el interruptor POWER en la posición
OFF (CHG) y, a continuación, presione
DISP/BATT INFO.
Capacidad de grabación (aprox.)
Tiempo de recarga
Tiempo aproximado (min) necesario para
recargar por completo una batería
totalmente descargada.
Tiempo de
recarga
Batería
NP-FH40 (incluida)
125
NP-FH50
135
NP-FH70
170
NP-FH100
390
Tiempo de grabación
Tiempo aproximado (min) disponible
cuando utiliza una batería completamente
cargada.
Al grabar en la memoria interna
(DCR-DVD810) o en un “Memory
Stick PRO Duo”
DCR-DVD610
Batería
Tras un momento, se mostrarán el tiempo
de grabación aproximado y la información
de la batería durante 7 segundo. Puede ver
la información sobre la batería durante un
máximo de 20 segundo si presiona de
142
Tiempo de
grabación
continua
Tiempo de
grabación
normal
(típico)*
NP-FH40
(incluida)
110
120
50
55
NP-FH50
130
60
140
65
NP-FH70
280
130
300
140
Batería
NP-FH100
Tiempo de
grabación
continua
Tiempo de
grabación
normal
(típico)*
625
300
680
325
DCR-DVD710/DVD810
Batería
Tiempo de
grabación
continua
95
Tiempo de
grabación
normal
(típico)*
45
DCR-DVD710/DVD810
Batería
Tiempo de
grabación
continua
Tiempo de
grabación
normal
(típico)*
NP-FH40
(incluida)
80
95
35
40
NP-FH50
95
40
110
45
NP-FH70
205
90
235
105
NP-FH100
470
210
535
240
110
50
NP-FH50
110
50
130
60
NP-FH70
235
110
280
130
NP-FH100
535
255
b Notas
625
300
• Todas las mediciones corresponden al modo de
grabación [SP] bajo las siguientes condiciones:
Valor superior: Con la luz de fondo de la
pantalla LCD encendida.
Valor inferior: Al grabar con el visor mientras el
panel de LCD se mantiene cerrado.
Al grabar en un disco
DCR-DVD610
Batería
Tiempo de
grabación
continua
95
Tiempo de
grabación
normal
(típico)*
NP-FH40
(incluida)
40
100
45
NP-FH50
110
45
120
50
NP-FH70
235
105
255
110
NP-FH100
535
240
580
260
* El tiempo de grabación normal indica el tiempo
de grabación al repetir las operaciones de inicio/
parada, encendido/apagado de la alimentación y
utilización del zoom.
Tiempo de reproducción
Tiempo aproximado (min) disponible
cuando utiliza una batería completamente
cargada.
Spanish Quick Guide/Guía rápida en español
NP-FH40
(incluida)
Al reproducir en la memoria interna
(DCR-DVD810) o en un “Memory
Stick PRO Duo”
DCR-DVD610
Batería
Panel de
Panel de LCD
LCD
abierto*
cerrado
NP-FH40
(incluida)
150
170
NP-FH50
170
195
NP-FH70
370
415
NP-FH100
830
925
Continúa ,
143
Paso 2: Recarga de la batería (Continuación)
DCR-DVD710/DVD810
Batería
Panel de
Panel de LCD
LCD
abierto*
cerrado
NP-FH40
(incluida)
140
170
NP-FH50
165
195
NP-FH70
350
415
NP-FH100
785
925
Al reproducir un disco
– La batería está completamente gastada (sólo
para la información sobre la batería).
• No se suministrará energía de la batería
mientras el adaptador de ca se encuentre
conectado a la toma DC IN de la videocámara,
aunque el cable de alimentación esté
desconectado del tomacorriente de pared.
• Si conecta una luz de video opcional, se
recomienda que utilice una batería NP-FH70/
NP-FH100 (DCR-DVD710/DVD810).
• No es recomendable utilizar una batería NPFH30, que sólo permite realizar grabaciones y
reproducciones de corta duración con la
videocámara.
DCR-DVD610
Batería
Panel de
Panel de LCD
LCD
abierto*
cerrado
NP-FH40
(incluida)
120
135
NP-FH50
140
155
NP-FH70
300
330
NP-FH100
680
745
DCR-DVD710/DVD810
Batería
Panel de
Panel de LCD
LCD
abierto*
cerrado
NP-FH40
(incluida)
115
135
NP-FH50
135
155
NP-FH70
290
330
NP-FH100
650
745
* Con la luz de fondo de la pantalla LCD
encendida.
Acerca de la batería
• Antes de cambiar la batería, deslice el
interruptor POWER a la posición OFF (CHG) y
apague el indicador
(Película)/indicador
(Imagen fija)/indicador ACCESS/indicador
de acceso.
• El indicador CHG (carga) parpadeará durante la
recarga o Battery Info no se mostrará
correctamente en las siguientes situaciones:
– La batería no está correctamente colocada.
– La batería está dañada.
144
Acerca del tiempo de recarga / grabación /
reproducción
• Tiempos calculados utilizando la videocámara a
una temperatura de 25 °C (se recomienda una
temperatura de 10 °C a 30 °C).
• El tiempo de grabación y de reproducción
disponible será más corto cuando utilice la
videocámara a bajas temperaturas.
• En función de las condiciones en las que utilice
la videocámara, es posible que el tiempo de
grabación y reproducción disponible se vea
reducido.
Acerca del adaptador de ca
• Si utiliza el adaptador de alimentación de ca
conéctelo a un tomacorriente de pared cercano.
Si se produce alguna falla de funcionamiento al
utilizar la videocámara, desconecte el adaptador
de alimentación de ca del tomacorriente de
inmediato.
• No utilice el adaptador de alimentación de ca
colocado en un espacio angosto, tal como entre
una pared y los muebles.
• No provoque un cortocircuito en la clavija de cc
del adaptador de ca ni en el terminal de la
batería con ningún objeto metálico, ya que
podría ocasionar un funcionamiento
inadecuado.
• Aunque la videocámara esté apagada, seguirá
recibiendo adapoador de alimentación de ca
(corriente doméstica) mientras esté conectada a
la toma de pared mediante el adaptador de
alimentación de ca
Paso 3: Conexión de la alimentación y ajuste de
la fecha y la hora
Ajuste la fecha y la hora cuando utilice la
videocámara por primera vez. Si no ajusta
la fecha y la hora, aparecerá la pantalla
[AJUS.RELOJ] cada vez que encienda la
videocámara o cambie la posición del
interruptor POWER.
Toque el botón que aparece en la pantalla
LCD.
3 Seleccione la zona geográfica
deseada con
[SIGUIENTE].
/
y luego toque
4 Ajuste el valor de [HORA
5 Ajuste [A] (año) mediante
/
.
Interruptor POWER
1 Mientras mantiene presionado el
botón verde, deslice el interruptor
POWER varias veces en la
dirección de la flecha hasta que
se encienda el indicador
correspondiente.
(Película): para grabar películas
(Imagen fija): para tomar
imágenes fijas
Vaya al paso 3 la primera vez que
encienda la videocámara.
2 Toque
(HOME) t
(AJUSTES) t [AJ.REL./
IDIOM. ] t [AJUS.RELOJ].
Aparecerá la pantalla [AJUS.RELOJ].
6 Seleccione [M] con
ajuste el mes con
/
/
, luego
.
Spanish Quick Guide/Guía rápida en español
VERANO] y luego toque
[SIGUIENTE].
7 Ajuste [D] (día), hora y minuto del
mismo modo, y luego toque
[SIGUIENTE].
8 Compruebe que el reloj esté
correctamente ajustado y luego
toque
.
El reloj se pone en funcionamiento.
Puede seleccionar cualquier año hasta el
2037.
Para la medianoche, ajuste el reloj en
12:00 am.
Continúa ,
145
Paso 3: Conexión de la alimentación y
ajuste de la fecha y la hora (continuación)
Para el mediodía, ajuste el reloj en
12:00 pm.
Paso 4: Realización
de ajustes antes de la
grabación
Apertura de la tapa del objetivo
Para apagar la videocámara
Deslice el interruptor POWER hacia la
posición OFF (CHG).
Deslice el interruptor LENS COVER hacia
la posición OPEN.
b Notas
• Si no usa la videocámara durante
aproximadamente 3 meses, la batería
recargable integrada se descarga y es posible
que los ajustes de la fecha y la hora se borren de
la memoria. En este caso, cargue la batería
recargable incorporada y ajuste la fecha y la
hora de nuevo.
• Después de encender la videocámara, tarda unos
cuantos segundos en estar lista para tomar
imágenes. No es posible utilizar la videocámara
durante este periodo.
• En el ajuste predeterminado, la videocámara se
apaga automáticamente si no la utiliza durante
aproximadamente 5 minuto, para conservar la
energía de la batería ([APAGADO AUTO]).
z Sugerencias
• La fecha y la hora no aparecen durante la
grabación, aunque se graban automáticamente
en el medio y se pueden mostrar durante la
reproducción ([CÓDIGO DATOS]).
• Si los botones del panel táctil no funcionan
correctamente, ajuste el panel táctil
([CALIBRACIÓN]).
Luego de grabar, deslice el interruptor
LENS COVER a la posición CLOSE para
cerrar la tapa del objetivo.
Ajuste del panel de LCD
Abra el panel de LCD 90 grados con
respecto a la videocámara (1) y, a
continuación, gírelo en el ángulo que le
resulte más adecuado para grabar o
reproducir (2).
290 grados
(máx.)
190 grados con
respecto a la
videocámara
Cambio del ajuste de idioma
Puede modificar las indicaciones en
pantalla para que se muestren los mensajes
en un idioma determinado.
(AJUSTES)
Toque
(HOME) t
t[AJ.REL./IDIOM.
] t[AJUSTE
IDIOMA ] y luego seleccione el idioma
deseado.
146
2180 grados
(máx.)
DISP/BATT INFO
Para desactivar la luz de fondo de la
pantalla LCD y conseguir que la
batería dure más tiempo
(DCR-DVD710/DVD810)
Visor
Mantenga presionado DISP/BATT INFO
durante unos segundos hasta que aparezca
.
Este ajuste resulta práctico cuando utiliza la
videocámara en condiciones de mucho
brillo o si desea ahorrar energía de la
batería. Este ajuste no afectará a la imagen
grabada. Para encender la luz de fondo de la
pantalla LCD, mantenga presionado DISP/
BATT INFO durante unos segundos hasta
que
desaparezca.
Palanca de ajuste del
objetivo del visor
Muévala hasta que la
imagen sea clara.
• Tenga cuidado de no presionar los botones del
marco de la pantalla LCD cuando abra o ajuste
el panel de LCD.
z Sugerencias
• Si abre el panel de LCD a 90 grados respecto de
la videocámara y lo gira 180 grados hacia el
objetivo, podrá cerrarlo con la pantalla de LCD
mirando hacia fuera. Esto resulta conveniente
durante operaciones de reproducción.
• Toque
(HOME) t
(AJUSTES) t
[AJUS.SON./PANT.] t [BRILLO LCD] y
ajuste el brillo de la pantalla LCD.
• La información se muestra o se oculta (se
muestra y se oculta) cada vez que presiona
DISP BATT/INFO.
• Puede ajustar el brillo de la luz de fondo del
visor al tocar
(HOME) t
(AJUSTES)
t [AJUS.SON./PANT.] t [LUZ F.VISOR].
Ajuste de la correa de sujeción
Ajuste y asegure la correa de sujeción como
se muestra en la ilustración y sostenga
correctamente la videocámara.
Spanish Quick Guide/Guía rápida en español
z Sugerencias
b Notas
Ajuste del visor
Puede usar el visor para ver las imágenes a
fin de evitar el desgaste de la batería o
cuando la imagen en la pantalla LCD sea de
baja calidad.
Extraiga el visor y mire a través de él.
Ajuste el visor a su alcance visual.
147
Paso 5: Selección de un medio
Puede definir en forma separada el medio que usará para películas y el que usará para
imágenes fijas.
Para películas, puede seleccionar la memoria interna*, un disco o un “Memory Stick PRO
Duo”. Para imágenes fijas, puede seleccionar la memoria interna*, o un “Memory Stick PRO
Duo”.
DCR-DVD610/DVD710
En el ajuste predeterminado, las películas se graban en un disco. Las imágenes fijas se graban
sólo en un “Memory Stick PRO Duo”.
DCR-DVD810
En el ajuste predeterminado, tanto las películas como las imágenes fijas se graban en la
memoria interna.
*
Memoria interna
Disco
Película
Imagen fija
“Memory Stick PRO Duo”
* DCR-DVD810
b Notas
• Puede grabar, reproducir o editar imágenes en el medio seleccionado. Al grabar, reproducir o editar
imágenes en otro medio, seleccione el medio nuevamente.
Selección de un medio para
películas
1 Toque
(HOME) t
(GESTIONAR SOPORTE) t
[AJ.SOPORTE PEL.].
Aparece la pantalla de ajuste de medio
para películas.
148
2 Toque el medio deseado.
3 Toque [SÍ].
4 Cuando aparezca [Finalizado.],
toque
.
Cambió el medio para películas.
Selección de un medio para
imágenes fijas (DCR-DVD810)
1 Toque
(HOME) t
(GESTIONAR SOPORTE) t
[AJ.SOPORTE FOTO].
Aparece la pantalla de ajuste de medio
para imágenes fijas.
b Notas
• No es posible seleccionar un disco como medio
para imágenes fijas.
3 Toque [SÍ].
4 Cuando aparezca [Finalizado.],
toque
.
Cambió el medio para imágenes fijas.
1 Deslice el interruptor POWER para
encender el indicador del modo
(
(Película)/
(Imagen fija)) en que
desea comprobar el medio.
2 Verifique el icono de medio que aparece
en la esquina superior izquierda de la
pantalla.
Icono de medio
Memoria interna*
Disco (el icono difiere según
el tipo de disco.)
“Memory Stick PRO Duo”
* DCR-DVD810
Spanish Quick Guide/Guía rápida en español
2 Toque el medio deseado.
Para confirmar el medio seleccionado
149
Paso 6: Inserción de un disco o un “Memory
Stick PRO Duo”
Si selecciona [MEMORIA INTERNA] en
el “Paso 5”, la operación de este paso es
innecesaria (DCR-DVD810).
Inserción de un disco
3 Coloque el disco con la cara de
grabación hacia la videocámara y
presione el centro del disco hasta
que haga clic.
Si selecciona [DISCO] en el “Paso 5”, se
necesita un nuevo DVD-RW, DVD+RW,
DVD-R o DVD+R DL de 8 cm
b Notas
• Antes de utilizarlo, elimine el polvo y las
huellas dactilares del disco con un paño suave.
1 Verifique que la videocámara esté
encendida.
2 Deslice el interruptor OPEN de la
cubierta del disco en la dirección
que indica la flecha (OPEN l).
[ABRIENDO…] aparece en la pantalla.
La cubierta del disco se abre levemente
en forma automática.
Indicador ACCESS (Disco)
Interruptor OPEN de la
cubierta del disco
Lente de captación
Si usa un disco de una sola cara, colóquelo con
la etiqueta orientada hacia afuera.
4 Cierre la cubierta del disco.
[ACCESO A DISCO] aparece en la
pantalla.
Es posible que la videocámara tarde un
momento en reconocer el disco.
x DVD-RW/DVD+RW
Aparece una pantalla que pregunta si
desea utilizar [GUÍA SELEC.DISCO].
Usar [GUÍA SELEC.DISCO] le permite
formatear el disco siguiendo las
instrucciones en pantalla. Si no desea
usarla, avance al paso 5.
x DVD-R/DVD+R DL
Cuando la cubierta del disco se abra
levemente, ábrala más.
150
Puede comenzar a grabar
inmediatamente después de que
[ACCESO A DISCO] desaparece de la
pantalla. No es necesario que avance a
los pasos posteriores al paso 5.
5 Toque la opción que desee en la
pantalla.
x DVD-RW
Seleccione el formato de grabación,
.
[VIDEO] o [VR], y luego toque
x DVD+RW
Seleccione la relación de aspecto de la
película, [PANORÁM.16:9] o [4:3],
.
luego toque
6 Toque [SÍ].
toque
.
Cuando el proceso de formateo finalice,
puede comenzar a grabar en disco.
z Sugerencias
• Si usa un DVD-RW mientras está
ajustado el funcionamiento en modo Easy
Handycam, el formato de grabación se fija
en el modo VIDEO.
Para extraer el disco
1 Realice los pasos 1 y 2 para abrir la
cubierta del disco.
2 Presione el soporte del disco en el centro
del compartimento del disco y retire el
disco sosteniéndolo por el borde.
• Asegúrese de no obstruir la operación con su
mano u otros objetos al abrir o cerrar la cubierta
del disco. Mueva la correa hacia la parte inferior
de la videocámara y luego abra o cierre la
cubierta del disco.
• Si la correa queda atrapada al cerrar la cubierta
del disco, podría causar una falla en el
funcionamiento de la videocámara.
• No toque el lado de grabación del disco ni el
lente de captación.
Si usa un disco de dos caras, tenga cuidado de
no ensuciar la superficie con huellas dactilares.
• Si éste no está colocado correctamente al cerrar
la cubierta del disco, es posible que cause una
falla de funcionamiento en la videocámara.
• No desconecte las fuentes de alimentación
mientras formatea el disco.
• No golpee ni sacuda la videocámara puesto que
está leyendo y escribiendo en el disco:
– mientras el indicador ACCESS está
encendido
– mientras el indicador ACCESS está
parpadeando
– mientras [ACCESO A DISCO] o
[ABRIENDO…] aparecen en la pantalla LCD
• Puede transcurrir cierto tiempo hasta que se
extraiga el disco, dependiendo del contenido
grabado.
• Si un disco está rayado o sucio con huellas
dactilares, pueden transcurrir hasta 10 minuto
antes de extraerlo. Si eso sucede, es posible que
el disco esté dañado.
z Sugerencias
Spanish Quick Guide/Guía rápida en español
7 Cuando aparezca [Finalizado.],
b Notas
• Puede insertar o extraer el disco cuando la
videocámara esté conectada a una fuente de
alimentación, incluso si está apagada. Sin
embargo, no se inicia el proceso de
reconocimiento del disco (paso 4).
• Puede comprobar si está usando el disco
correcto al usar la [GUÍA SELEC.DISCO] en el
HOME MENU.
Continúa ,
151
Paso 6: Inserción de un disco o un “Memory Stick PRO Duo”
(Continuación)
Inserción de un “Memory Stick
PRO Duo”
Esta operación es necesaria sólo si
selecciona [MEMORY STICK] en el “Paso
5”.
z Sugerencias
• Si sólo graba imágenes fijas en el “Memory
Stick PRO Duo”, no son necesarias las
operaciones posteriores al paso 3.
3 Si selecciona [MEMORY STICK]
en el “Paso 5” para la grabación
de películas, deslice el interruptor
POWER varias veces hasta que
se encienda el indicador
(Película).
Si el interruptor POWER está ajustado
en OFF (CHG), deslícelo mientras
mantiene presionado el botón verde.
1 Abra el panel de LCD.
2 Inserte el “Memory Stick PRO
Duo”.
1 Abra la cubierta del Memory Stick Duo
hacia la dirección de la flecha.
2 Coloque el “Memory Stick PRO Duo”
en la ranura para Memory Stick Duo en
la orientación correcta hasta que haga
clic.
3 Cierre la cubierta del Memory Stick
Duo.
Aparece la pantalla [Crear nuevo
arch.base de datos de imágenes.] al
insertar un nuevo “Memory Stick PRO
Duo”.
4 Toque [SÍ].
Indicador de acceso
Coloque la marca b hacia el
lado de la pantalla LCD.
152
Para extraer el “Memory Stick PRO
Duo”
Tiempo de grabación de películas en
un “Memory Stick PRO Duo”
Abra el panel de LCD y la cubierta del
Memory Stick Duo. Empuje levemente el
“Memory Stick PRO Duo” una vez y luego
deslícelo hacia fuera de la ranura.
Las cifras de la tabla indican el tiempo de
grabación aproximado en minuto del
“Memory Stick PRO Duo”.
Las cifras en ( ) indican el tiempo de
grabación mínimo.
b Notas
Modo de
grabación
512MB
1GB
2GB
4GB
8GB
9M (HQ)
(calidad
alta)
6 (5)
10 (10)
25 (25)
55 (50)
115 (100)
6M (SP)
(calidad
estándar)
9 (5)
20 (10)
40 (25)
80 (50)
170 (100)
3M (LP)
(larga
duración)
15 (10)
35 (25)
80 (50)
160 (105)
325 (215)
b Notas
• Los números de la tabla corresponden a la
utilización de un “Memory Stick PRO Duo”
fabricado por Sony Corporation. El tiempo de
grabación varía según las condiciones de
grabación, el tipo de “Memory Stick” o el ajuste
de [MODO GRAB.].
• Cuando el tiempo de grabación es menor a 5
minuto, aparece
.
Spanish Quick Guide/Guía rápida en español
• Para evitar daños en los medios o la pérdida de
imágenes grabadas, no realice ninguna de las
siguientes acciones mientras el indicador de
acceso está encendido:
– extraer la batería o el adaptador de ca de la
videocámara
– someter la videocámara a golpes o a
vibraciones
– extraer el “Memory Stick PRO Duo” de la
videocámara
• No abra la cubierta del Memory Stick Duo
mientras realiza una grabación.
• Insertar “Memory Stick PRO Duo” a la fuerza
en la dirección incorrecta puede causar un mal
funcionamiento del “Memory Stick PRO Duo”,
de la ranura para Memory Stick Duo o de los
datos de imagen.
• Si [Error al crear un nuevo archivo de base de
datos de imágenes. Es posible que no exista
suficiente espacio libre.] aparece en el paso 4,
formatee el “Memory Stick PRO Duo”. Todos
los datos grabados en el “Memory Stick PRO
Duo” se eliminarán al formatearlo.
• No presione ni extraiga el “Memory Stick PRO
Duo” por la fuerza, ya que podría ocasionar un
funcionamiento inadecuado.
153
Spanish Quick Guide/Guía rápida en español
Grabación
Las imágenes se graban en el medio seleccionado en el ajuste de medio.
DCR-DVD610/DVD710
En el ajuste predeterminado, las películas se graban en un disco. Las imágenes fijas se graban
sólo en un “Memory Stick PRO Duo”.
DCR-DVD810
En el ajuste predeterminado, tanto las películas como las imágenes fijas se graban en la
memoria interna.
PHOTO F
Abra la tapa del objetivo.
START/STOP B
(HOME) E
(HOME) D
START/STOP C
Interruptor POWER A
Si el interruptor POWER
está ajustado en OFF
(CHG), deslícelo mientras
mantiene presionado el
botón verde.
Indicador
(Película)
Indicador
(Imagen fija)
b Notas
• Si los indicadores de ACCESS/acceso están encendidos o parpadean después de finalizada la grabación,
significa que todavía se están escribiendo datos en el medio. No golpee ni sacuda la videocámara y no
desconecte la batería o el adaptador de ca
• Si [MEMORIA INTERNA] (DCR-DVD810) o [MEMORY STICK] está seleccionado en [AJ.SOPORTE
PEL.], cuando un archivo de película supera los 2 GB, el siguiente archivo de película se crea
automáticamente.
154
z Sugerencias
• Puede consultar el espacio libre para películas en el medio al tocar
SOPORTE) t [INFO SOPORTE].
Películas
(HOME) t
(GESTIONAR
Imágenes fijas
1 Deslice el interruptor POWER A
hasta que se encienda el
indicador
(Película).
2 Presione START/STOP B (o C).
1 Deslice el interruptor POWER A
hasta que se encienda el
indicador
(Imagen fija).
2 Presione PHOTO F ligeramente
[ESPERA] t [GRAB.]
Para detener la grabación, presione
START/STOP de nuevo.
Parpadea t Se enciende
aparece junto a
o
. Cuando
desaparece, significa que se ha
grabado la imagen.
b Notas
• No puede grabar imágenes fijas en un disco.
Spanish Quick Guide/Guía rápida en español
para enfocar A (se oye un pitido),
luego presione completamente B
(se oye el clic del obturador).
z Sugerencias
•
aparece cuando [ AJUSTE INDEX] está ajustado en [ACTIVADO] (el ajuste predeterminado)
durante la grabación de películas.
• Puede cambiar la grabación entre película e imagen fija al tocar
(HOME) D (o E) t
(TOMA
DE IMÁGENES) t [PELÍCULA] o [FOTO].
• Puede crear imágenes fijas a partir de las películas grabadas.
155
Reproducción
Puede reproducir imágenes grabadas en el medio seleccionado en el ajuste de medio.
DCR-DVD610/DVD710
En el ajuste predeterminado, se reproducen las películas de un disco. Las imágenes fijas se
graban y se reproducen sólo en un “Memory Stick PRO Duo”.
DCR-DVD810
En el ajuste predeterminado, se reproducen las imágenes de la memoria interna.
Palanca de zoom
motorizado F
Interruptor POWER
A
(HOME) D
(HOME) E
(VISUALIZAR IMÁGENES) C
(VISUALIZAR IMÁGENES) B
1 Deslice el interruptor POWER A para encender la videocámara.
2 Presione
(VISUALIZAR IMÁGENES) B (o C).
La pantalla VISUAL INDEX aparece en la pantalla LCD. (Puede que las miniaturas tarden
un momento en aparecer.)
Índice de rollos de película
Índice de caras
Busca imágenes por fecha de
grabación.*
6 imágenes anteriores
Aparece con la imagen en la
última ficha reproducida o
grabada (B de la imagen fija
grabada en el “Memory Stick
PRO Duo”).
6 imágenes siguientes
Permite volver a la
pantalla de grabación.
Muestra películas.
(OPTION)
Muestra imágenes fijas.
* Al seleccionar [DISCO] en [AJ.SOPORTE PEL.], aparece un tipo de disco. No puede buscar
películas por fecha de grabación.
156
z Sugerencias
• El número de imágenes que aparece en la pantalla VISUAL INDEX se puede cambiar entre 6 y 12 al
mover la palanca del zoom motorizado F. Para fijar este número, toque
(HOME) D (o E) t
(AJUSTES) t [VIEW IMAGES SET]t [DISPLAY
].
3 Iniciar reproducción.
Películas
Toque la ficha
y la película que desea reproducir.
Cuando la reproducción desde la película seleccionada llega a la última película, la pantalla
regresa a la pantalla VISUAL INDEX.
Vuelve a la pantalla
VISUAL INDEX.
Película siguiente
Detener (muestra la
pantalla VISUAL INDEX).
(OPTION)
Rebobinado / Avance rápido
z Sugerencias
• Toque
/
durante la pausa para reproducir la película a cámara lenta.
• Al reproducir películas desde la memoria interna (DCR-DVD810) o desde un “Memory Stick PRO Duo”,
un toque de
/
hace que la película retroceda o avance 5 veces más rápido que lo normal, 2
toques aumenta la velocidad 10 veces, 3 toques aumenta la velocidad 30 veces y 4 toques aumenta la
velocidad aproximadamente 60 veces.
• Al reproducir las películas de un disco, un toque de
/
hace que la película retroceda o avance
5 veces más rápido que lo normal, 2 toques aumenta la velocidad 10 veces (alrededor de 8 veces más
rápido en el caso de un DVD+RW).
Spanish Quick Guide/Guía rápida en español
Principio de la película /
Película anterior
Alterna el modo de
reproducción y de pausa
cada vez que se toca.
Imágenes fijas
Toque la ficha
y la imagen fija que desee reproducir.
Vuelve a la pantalla
VISUAL INDEX.
Presentación de
diapositivas
Pasa a la pantalla VISUAL
INDEX.
(OPTION)
Anterior / Siguiente
157
Reproducción (Continuación)
Ajustar el volumen del sonido de las películas
Al reproducir películas, toque
con
/
.
(OPTION) t ficha
t [VOL.] y luego ajuste el volumen
z Sugerencias
• Puede cambiar la pantalla a VISUAL INDEX al tocar
IMÁGENES) t [VISUAL INDEX].
158
(HOME) D (o E) t
(VISUALIZAR