PROLED PROLED DMX PWM DIMMER Montageanleitung
Advertisement
Advertisement
Montageanleitung / Installation manual
PROLED DMX PWM DIMMER 24-KANAL
PROLED DMX PWM DIMMER 24-KANAL ist ausgelegt um das universelle DMX512 Signal in ein PWM Signal umzuwandeln. Der Dimmer kann mit einer DMX512 Konsole, mit 256
Grauschattierungen als Ausgang pro Kanal arbeiten. Realisieren Sie 0-100% Dimmung und verschiedene Übergangseffekte. Ausgestattet mit DMX Standard XRL-3- und grünen Interface-
Buchsen, ist er einfach zu bedienen. PROLED DMX PWM DIMMER 24-KANAL kann einfarbige, zweifarbige und RGB LED Lichter steuern.
1. Technische Daten:
PROLED DMX PWM DIMMER 4-KANAL
Signal Eingang
Eingangs spannung
Max. Laststrom
Max. Leistungsausgang
Ausgang Grauabstufungen
Temperaturbereich
Produktabmessungen
Verpackungsgrösse
Gewicht (Brutto)
DMX 512
DC 5 V ~ DC 24 V
3A/Ch x 24 CH, Max 72 A
360 W / 864 W / 1728 W (5 V / 12 V / 24 V)
256 Level/Ch (8bit/Ch)
-30°C ~ 65°C
260 x 120 x 40 mm (LxBxH)
290 x 130 x 46 mm (LxBxH)
860 g
MBN GmbH Balthasar-Schaller-Str. 3 86316 Friedberg Germany www.proled.com
2. Abmessungen:
Montageanleitung / Installation manual
3. DMX-Adresse einstellen
Akzeptiert DMX512 Signal nur, wenn DIP-Schalter FUN=OFF ist, wie in Bild 1
DIP 1
WERT 001
2
002
3
004
4
008
5
016
ANMERKUNG
6
032
7
064
8
128
9
256
DMX512 Startadresse ergibt sich aus den Einstellungen der DIP-Schalter 1-9, die nach unten in die
ON-Position gesetzt sind. DIP-Schalter nach Oben in OFF-Position bedeutet Wert 0.
Beispiel: Startadresse auf Wert 37 einstellen
Schieben Sie den ersten, dritten und sechsten DIP-Schalter nach unten auf Wert „1“ und den Rest auf „0“ (wie in Bild 2). Die Summe der Schalter 1-9 ist 1+4+32, so dass die
Startadresse auf Wert 37 eingestellt ist.
Bild 1 Bild 2
MBN GmbH Balthasar-Schaller-Str. 3 86316 Friedberg Germany www.proled.com
4. Test Funktionen
1. Automatische Funktionen
Montageanleitung / Installation manual
Wie im Bild, FUN=ON: Testfunktion; DIP-Schalter 1-9=OFF: SCHWARZ
DIP 1
ROT
DIP 2
GRÜN
DIP 3
BLAU
DIP 4
GELB
DIP 5 DIP 6 DIP 7 DIP 8
LILA TÜRKIS WEISS SCAN
DIP 9
Farbe
Schrittweise
DIP8/DIP9 in „ON“ definiert den Farbwechselmodus. 1-7 für 8 verschiedene Geschwindigkeiten. 7 ist die schnellste, während bei DIP-Schalter 1-7=OFF: die Geschwindigkeit 0 ist.
DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6 DIP 7
Geschw. 1 Geschw. 2 Geschw. 3 Geschw. 4 Geschw. 5 Geschw. 6 Geschw. 7
Wie im Bild: wenn verschiedene DIP-Schalter an sind, gilt die schnellste Geschwindigkeit. Wenn alle
DIP-Schalter=ON, ist Farbwechsel im Test-Mode sowie Geschwindigkeit 7 eingestellt
5. Anschluß Diagramm
Der PROLED DMX PWM DIMMER 24-KANAL kann mit jeder DMX-Steuerung zusammenarbeiten. Dieses
Anschlußdiagramm ist als Beispiel für DMX PC Steuerung,
DMX- Steuerung sowie DMX-Steuerpult gedacht.
PROLED DMX PWM DIMMER 24-KANAL ist mit 2 verschiedenen Anschlußvarianten ausgestattet. Das
Anschlußdiagramm stellt beispielhaft den XRL-3 Anschluß dar. Alternativ kann der Benutzer auch die grünen Buchsen verwenden.
MBN GmbH Balthasar-Schaller-Str. 3 86316 Friedberg Germany www.proled.com
Montageanleitung / Installation manual
6. Netzteilanschluß
Bitte beachten Sie, dass der PROLED DMX PWM DIMMER 24-Kanal mit 4 Anschlußklemmen für die Zuleitung 5 - 24 V DC ausgestattet ist. Diese sind in Kanal 1-12 und Kanal 13-24 unterteilt. Pro Eingang dürfen max. 36 A Stromlast angeschlossen werden. Falls alle 24 Kanäle benutzt werden, aber nur ein Netzteil verwendet werden soll, müssen die Klemmen gebrückt werden.
7. Achtung:
1. Anschluss und Wartung muss durch qualifiziertes Personal erfolgen.
2. Das Gerät ist nicht Wasserdicht. Bitte vor direkter Sonneneinstrahlung sowie Regen schützen. Bei Montage im Freien bitte in einem wasserdichten Gehäuse schützen.
3. Gute Wärmeabführung verlängert die Lebensdauer. Bitte für ausreichende Luftzirkulation sorgen.
4. Bitte prüfen Sie vor Einbau, ob der Spannungsausgang des verwendeten LED-Netzteiles mit der Arbeitsspannung des Dimmers übereinstimmt.
5. Bitte stellen Sie sicher, dass die verwendeten Kabelquerschnitte zwischen Dimmer und LED-
Licht für den auftretenden Strom ausreichend dimensioniert sind. Bitte auch sicher stellen, dass die Kabel fest in den Anschlüssen sitzen, um Überhitzung oder unzureichenden
Kontakt zu vermeiden.
6. Sicherstellen, dass Verbindungen und Polaritäten richtig eingehalten sind, um
Beschädigungen an der LED zu verhindern.
7. Falls ein Fehler auftritt, schicken Sie bitte das Produkt an ihren Lieferanten zurück. Bitte selber keine Fehlerbehebung vornehmen.
8. Gewährleistungsbestimmungen:
1. Wir bieten eine lebenslange technische Unterstützung für das Produkt an:
Wir gewähren eine 2-jährige Gewährleistung ab Kaufdatum. Die Gewährleistung umfasst eine kostenlose Reparatur oder Ersatz nach Wahl des Herstellers.
Für Fehler nach der Gewährleistung behalten wir uns das Recht vor, Arbeitszeit und
Ersatzteile zu verrechnen.
2. Gewährleistungsausschluß:
Jegliche vorsätzliche Beschädigung durch falsche Bedienung oder Spannungs- und
Lastüberladung.
Das Bauteil weist schwere Beschädigungen auf.
Beschädigungen durch Naturkatastrophen oder höhere Gewalt.
Beschädigungen am Garantie-, Zerbrechlich- oder Barcodeaufkleber.
Das Bauteil durch eine neue Version ersetzt wurde.
3. Reparatur oder Ersatz, wie in dieser Anleitung beschrieben, ist nur für den Käufer verfügbar.
PROLED ist nicht verantwortlich für zufällige oder nachfolgende Beschädigungen bei nicht
Einhaltung der Vorgaben aus dieser Bedienungsanleitung.
4. Jegliche Änderungen oder Erweiterungen der Gewährleistung bedürfen der schriftlichen
Zustimmung durch den Hersteller.
★ Diese Anleitung bezieht sich nur auf das Produkt. PROLED behält sich das Recht zu technischen
Änderungen ohne vorherige Ankündigung vor.
07.19 Technische Änderungen vorbehalten
MBN GmbH Balthasar-Schaller-Str. 3 86316 Friedberg Germany www.proled.com
Montageanleitung / Installation manual
PROLED DMX PWM DIMMING 24-CHANNEL
PROLED DMX PWM DIMMING 24-CHANNEL Decoder is designed via advanced microelectronic control technology to convert universal DMX512 signal into PWM signal. This compact decoder work with DMX512 Console, with 256 levels gray scale output per channel.
Realize 0-100% brightness and various changing effect. Equipped with DMX standard XRL-3 and green terminal interface, it’s easy to operate. PROLED DMX PWM DIMMER 24-CHANNEL can handle single color, two color and RGB LED light.
1. Product Parameter:
PROLED DMX PWM DIMMING 4-CHANNEL
Signal Input
Input Voltage
Max. current load
Max. output power
Output grey scale
Working temperature
Dimensions
Package size
Weight (G.W.)
DMX 512
DC 5 V ~ DC 24 V
3A/Ch x 24 CH, Max 72 A
360 W / 864 W / 1728 W (5 V / 12 V / 24 V)
256 Level/Ch (8bit/Ch)
-30°C ~ 65°C
260 x 120 x 40 mm (LxWxH)
290 x 130 x 46 mm (LxWxH)
860 g
MBN GmbH Balthasar-Schaller-Str. 3 86316 Friedberg Germany www.proled.com
2. Configuration Diagram:
Montageanleitung / Installation manual
3. Set initial DMX-Address
Accept DMX512 signal only when the DIP switch FUN=OFF, as figure 1
DIP 1
VALUE 001
2
002
3
004
4
008
5
016
REMARK
6
032
7
064
8
128
9
256
DMX512 initial address is the total amount of the Dip switch 19, down dip switch to “ON” position,
User can get its place value, Up dip switch to “OFF” position, Its place value is 0.
Example: Set initial address to 37
Set the 1st , 3rd, 6th, bit of the DIP switch downward to “1”the rest to “0” (like figure 2), the summation from 1 to 9 is 1+4+ 32, so the DMX512 initial address code is 37.
Figure 1 Figure 2
MBN GmbH Balthasar-Schaller-Str. 3 86316 Friedberg Germany www.proled.com
4. Testing Functions
1. Automatic Funktions
Montageanleitung / Installation manual
As diagram, FUN=ON: test function; 1-9DIP switch=OFF: BLACK
DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6 DIP 7 DIP 8
RED GREEN BLUE YELLOW PURPURE CYAN WHITE SCAN
DIP 9
Color gradual
DIP8/DIP9 at “ON” is changing mode. 1-7 is to realize 8 speed levels. 7 is the fastest levels while dip switch 1-7=OFF: the speed is 0.
DIP 1 DIP 2 DIP 3
Speed 1 Speed 2 Speed 3
DIP 4
Speed 4
DIP 5
Speed 5
DIP 6
Speed 6
DIP 7
Speed 7
As diagram, when several dip switches are on, subjected to the highest switch value, when all the dip switches=ON, it's the color gradual in the test mode, 7 speed level
5. Conjuction Diagramm
The PROLED DMX PWM DIMMER 24-CHANNEL can be worked with any brand of DMX console.
This connection diagram is an example of the
DMX PC console, DMX controller, the DMX manual console and the DMX decoder.
PROLED DMX PWM DIMMER 24-CHANNEL is equipped with two types DMX terminal for the user’s selection. This connection diagram is the example of the XRL-3 terminal, and user can also use green terminal.
MBN GmbH Balthasar-Schaller-Str. 3 86316 Friedberg Germany www.proled.com
Montageanleitung / Installation manual
6. Power supply connection
Please pay attention, that the PROLED DMX PWM DIMMER 24-CHANNEL is equipped with 4 junctions for 5 – 24 V DC power supply. They are divided into channel 1-12 and 13-24. A single input can handle max. 36 A current load. If all 24-Channels must be used, but only one power supply will be connected, the junctions must be bridged.
7. Attention:
1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof enclosure.
3. Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
4. Please check if the output voltage of any LED power supplies used comply with the working voltage of the product.
5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please also ensure that the cable is secured tightly in the connector to void the accidents due to overheat and poor contact on the wire.
6. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.
7. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
8. Warrenty Agreement:
1. We provide lifelong technical assistance with this product:
A 2-year warranty is given from the date of purchase. The warranty is for free repair or replacement depending on manufacturers decision.
For faults beyond the 2-year warranty we reserve the right to charge for time and parts.
2. Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
3. Repair or replacement as provided under this warranty is the exclusive remedy to the customer. PROLED shall not be liable for any incidental or consequential damages for breach of any stipulation in this warranty.
Any amendment or adjustment to this warranty must be approved in writing by manufacturer only.
★ This manual only applies to this model. PROLED reserves the right to make changes without prior notice
07.19 Technical amendments reserved
MBN GmbH Balthasar-Schaller-Str. 3 86316 Friedberg Germany www.proled.com

Public link updated
The public link to your chat has been updated.
Advertisement