Precision Medical PM65 Series Easy Go Vac Aspirator User manual

Below you will find brief information for Easy Go Vac Aspirator PM65 Series. This manual provides operating instructions and maintenance information for the Easy Go Vac Aspirator PM65 Series, a portable, AC/DC powered medical vacuum source intended for use in the homecare / healthcare environments. This manual is intended for professional use, as the device requires setup and operation by trained medical professionals. The Easy Go Vac Aspirator PM65 Series comes with a range of features, including a built-in overfill protection device, a hydrophobic filter, and a vacuum control knob for adjusting suction levels. The device operates on internal battery power, which can be recharged using the provided charger, or via an AC power source.

PDF Download
Document
Easy Go Vac Aspirator PM65 Series User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Portable AC/DC powered medical vacuum source
  • Built-in overfill protection device
  • Inline hydrophobic filter
  • Vacuum control knob for adjusting suction
  • Internal battery power, rechargeable using the provided charger
  • Option to operate on AC power source
  • Carry bag included

Frequently asked questions

1. Insert the small plug on the cord from the Battery Charger/Power Supply into External Power Jack on the Easy Go Vac Aspirator. 2. Connect the female end of the AC Power Cord into the Battery Charger/Power Supply. 3. Plug the male end (3 prong plug) into a grounded receptacle.

1. Insert small plug on cord from the Battery Charger/Power Supply into External Power Jack on the Aspirator. 2. Connect the female end of AC Power Cord into the Battery Charger/Power Supply. 3. Plug male end (3 prong plug) into a grounded receptacle. Amber light on Battery Charger / Power Supply will come on. When amber light changes to green, battery is fully charged. Average charging time is 2-4 hours. (A new battery may take longer to fully charge the first time.) NOTE: No damage will occur if the charger is left connected.

Turn the Aspirator OFF and disconnect from any external power source before cleaning. DO NOT clean the Aspirator with Alcohol, Acetone or other solvents. Use a cloth or sponge dampened with soap and water to clean the exterior components, and wipe dry with a clean cloth or paper towel.
Preparing document for printing…
0%