ORDER FORM - Web51 - HW
Order form
Order No.
900221
900225
900224
900176
900188
900189
900208
900222
900168
900201
900234
900235
900182
900216
900213
##
#
HW Server
Product
RTL 8019 CHIP SET
Web51 HW KIT
Web51 SW & licence only
Web51 Design KIT
Web51 Design KIT + D. Supp.
Web51 Designer support
RS 232 ETHERNET converter
ETHERNET I/O Controller
PonyProg – programmer kit
PAtmel – programmer kit
Charon - Web51 ver. 6.x module
Charon Motherboard
MU Alpha
M631/E AWG
M621/E DSO
Address:
Rumunska 26, Prague 2,120 00
Czech Republic EUROPE
Qty
Total
Subtotal:
Shipping *):
Total USD:
DATE
Phone : +420 222 511 918
email:
[email protected]
USD
$35
$170
$220
$280
$315
$60
$250
$280
$60
$60
$80
$35
$298
$798
$798
All the prices are in the USD. Prices are subject to change without notice.
*) Shipping depends on the destination country and total weight. Let us know where
are you from and which products are you going to order. We will promptly notify you of
the shipping charge.
Approximate shipping: Europe - $40, USA - $45, Asia - $50, Other countries - $55
(0,5 kg package)
Please fax this form to:
+420 222 513 833
Payment Method (please tick)
Prepaid (check enclosed, add please 20 USD-servicecharge)
Personal check (we ship after the check has cleared-takes 4-6 wks)
Wire tranfer instructions :
Jan Rehak, eBanka, a.s. - 1424 6028 / 2400
Na Prikope 19, Praha 1-CZECH REPUBLIC
ZIP: 117 19, SWIFT CODE: CEKOCZPP
Wire transfer (ask for instructions please)
Please confirm your payement by email
Credit Card:
VISA
Eurocard/MasterCard
Deliver to:
Card number
Security ID
We will ship to this address
last three digits on the signature panel on the
Company
back of the card, printed after the card number
Exp. Date: Month
Year
Name
Title
Name on card:
Number of another ID document for closer identification
Driver’s license
Passport
Phone - required
Social security No.
Fax
Number:
E-mail - required
Billing address:
City / State / Zip:
Street address / PO BOX
Charge the following amount to my account :
Authorized signature :
Order form
USD
City
State
ZIP
www.HW-Server.com
+:VHUYHU
www.HW-server.com
HW pricelist
HW server – Who are we
We are a production and development company. We also operate a local
Internet portal concentrating on development and production of electronics,
microcontroller technology and automatization. Our Czech WWW pages are
visited by about 1,800 unique IP's daily and about 25,000 unique readers
monthly, in a country populated by just 10 million people.
Our main products include Ethernet applications and development tools for
electronics. We also represent several foreign companies in the Czech
Republic and Slovakia regions.
Summary of our products:
RTL 8019 CHIP SET
Realtek RTL8019 and transformer 20F001N + unique MAC address from the Web51 address space
Web51 HW KIT
Simplified hardware with the features of small Web server
Web51 SW & licence only
Software of the Web51 system under a commercial license
Web51 Design KIT
HW and SW development KIT based on Web51 technology
Web51 Design KIT + D. Supp.
HW and SW development KIT based on Web51 technology. Designer support is a service that ensures
updates for 18 months for no extra cost, training and literature discounts, and other advantages.
Web51 Designer support
Designer support ensures updates for 18 months for no extra cost, training and literature discounts..
RS 232 ETHERNET converter
Ethernet to RS232/RS485 converter based on Web51 project
ETHERNET I/O Controller
Allows remote control and monitoring of up to 24 inputs and outputs, temperature measurement, and
much more
PonyProg – programmer kit
Simple programmer kit for Atmel, Microchip MCUs, Serial EEPROMs, Flashs
PAtmel – programmer kit
Atmel programmer kit
MU Alpha
Full hardware emulator of PIC16F84[A], 12C508A[509A], 16C54C..56A up to 20MHz
MU Beta
Hardware emulator of PIC12C508 – 16F628 up to 20MHz
PICQUICK
Programmer for all PICs and Serial EEPROMs with device upgrades available on Internet
M631/E AWG
The Arbitrary Waveform Generator
M621/E DSO
150 MHz Digital Storage Oscilloscope
www.HW.cz / www.HW-server.com
- HW server
+:VHUYHU
www.HW-server.com
Web51 - Ethernet in x51 MCU – free sources
Web51 is originally an open-source project that connected Ethernet to an 8052 microcontroller. This international project
has started from a network board connected to a microcontroller. Development versions can be found in China, Korea,
Australia or in the South Africa.
Web51 development system can be used under almost any OS. Most utilities needed for compiling and other tasks are
available in most operating systems. The development system directly supports DOS32 (MS-DOS with 32-bit support,
Windows) and Linux (x86 platform).
The Web51 project is written entirely in assembly. There is not enough RAM space for a higher-level language in the
basic version. If the RAM is extended and the full version libraries are used, a C compiler such as SDCC can of course be
used.
•
•
The project is interesting for its open source code, extensive libraries, number of supported peripherals etc..
The x51 microcontrollers don't offer much processing power and are rather expensive; however, they are very
common so are the development tools and the general knowledge about them.
•
•
•
Hardware fully documented include all datasheets, development boards..
•
•
Web51 is currently available in ASM version (SDCC version will be released in October 2002).
Due to design complexity and limited MCU power, Web51 is not intended for complicated applications. It is ideal
for instance for telemetry systems where a single chip is used (the x51 MCU) and the Ethernet interface needs to
be added.
The whole project has licensed an unique range of MAC addresses from IEEE.
Besides the development series, we also offer turn-key applications based on Web51 with open HW designs.
Licensing strategy
We, the authors of the Web51 system, offer the following two versions:
•
Free version – Covered by GNU GPL, available for download free of charge from http://web51.hwserver.com including source codes. However, some subroutines (such as RTL8019 control) are inside a library
that is distributed in binary form only. Available are several versions of the library, differing by the configured
number of simultaneous TCP connections supported.
•
Commercial version – Includes all source codes of the project. It is not limited by GNU GPL. It is distributed
together with our development system (our own assembler and linker). Available for purchase with the HW kit or
separately. Please e-mail us for details.
Web51 GNU project
The entire solution of a small WWW server at port 80 and a TELNET server at port 23 is an open project available under
the GNU General Public License. Its source code can be downloaded free of charge from our project page. Available is
the source code for the project except the communication library, which is available in binary form only.
A package of free GNU software also contains development tools including assembler and linker.
www.HW.cz / www.HW-server.com
- HW server
+:VHUYHU
www.HW-server.com
RTL 8019 CHIP SET
The Web51 project is open in terms of SW as well as HW. If you want to create
your own project with a similar hardware, you may find it difficult to purchase the
RTL8019AS Ethernet controller in small quantities.
Therefore, we offer a separate set of components that can bring Ethernet to your
microcontroller.
•
•
•
Transformer 20F001N
RTL8019AS
Unique MAC address from the Web51 Project address space
3ULFH
Web51 HW KIT
Simplified hardware designed for initial familiarization with the features of a small
Web server. Complete documentation is available on the project web pages. In
this simplified kit, the Ethernet controller RTL8019AS is connected to 16 pins of a
x51 compatible controller in DIL package. A fully functional WWW server that
responds to Echo requests and serves HTML pages with simple scripting
support manages with only 256 B of internal memory and 8 kB of FLASH in the
micro.
All published examples work with this hardware and can be loaded and run right
away (such as I/O control, simple temperature measurement, LCD interface,
TELNET access to serial port over a TCP/IP network, and more).
3ULFH
Design KIT
HW and SW development KIT based on Web51 technology. Contains Web51 KIT
with AT89S8252 and T89C51RD2 controllers and a CD ROM containing
everything from our Ethernet CD as well as library source code. The library is
subject to the commercial license and can be redistributed in binary form only. The
KIT also includes our development environment for Windows and Linux, unique
MAC address and a printed manual.
The Design KIT further includes a pre-paid royalty and a commercial license for
the use of the Web51 system.
Designer support
Designer support is a service that ensures updates for 18 months for no extra
cost, training and literature discounts, and other advantages. If requested, we can also grant you another batch of MAC
addresses and waived royalties with purchase.
:HE'HVLJQHU.,73ULFH
:HE'HVLJQHU.,7'6XSS3ULFH
www.HW.cz / www.HW-server.com
- HW server
+:VHUYHU
www.HW-server.com
LPT ISP KIT
Certain microcontrollers by ATMEL, such as the AVR family, ATmega, and several x51 compatibles
(AT89LS8252) can be serially in-system programmed with this kit.
Features
•
•
•
•
•
Connected to LPT Port
PonyProg Software for Windows 95,98 i Windows NT/2000
Bus driver ensures fast SCK edges, avoiding problems described in ATMEL Errata
docs
Software is friendly to the user and developer
Indication of programming progress and power status
3ULFH
Web51 - SW & License
Software of the Web51 system under a commercial license.
•
•
•
•
CD with complete docs, source codes, PDF and HTML manuals
Commercial license that does not contain GPL limitations
Assembler, linker, programming utilities, development environment
Firmware supports sending e-mails (starting from version 1.14)
To speed up the delivery, you can request to have the basic sources delivered by e-mail. This
way, you don't have to wait for the CD and printed license.
3ULFH
RS 232/485 ETHERNET converter
Converts a serial line to a TCP/IP or UDP/IP connection running on top of
Ethernet.
Allows communication between two devices or between a device and a computer
(server or workstation). It can be used as a buffer for data from a serial port, for
remote control of a manufacturing process, or to connect a peripheral remotely.
Application support includes subroutines for device control in various programming
languages and operating systems. The converter can be built into a custom peripheral.
Hardware is fully documented.
Features
•
•
•
•
•
•
•
•
•
•
•
Makes a RS232 serial port accessible over an Ethernet network
Interfaces: RJ45 - 10BaseT, RS232
Converter parameters configurable locally over RS232
Simple usage and set-up
Supports TCP/IP for data transfer (Telnet-like client)
Optional UDP transfer activation with RS485 support
RS485 protocol properties configurable, reducing response time to about 10ms per 10-char packet
Start and end delimiters of a transferred block of data
Support for passive and active mode (converter can establish connection upon activity on the serial port)
Two converters can effectively extend a serial port over the Ethernet
Security accomplished by specifying IP address and netmask for communication with the other side; support for
128-bit TEA-encrypted authorization in TCP/IP communication
3ULFH
www.HW.cz / www.HW-server.com
- HW server
+:VHUYHU
www.HW-server.com
ETHERNET I/O Controller
Allows remote control and monitoring of up to 24 inputs and outputs, temperature measurement, and much more. Control
and monitoring is accomplished by an authorized WWW interface, Telnet with support for establishing connection upon
changes, or by e-mail.
Typical applications include an intelligent watchdog controlled over the network that can buffer and send out reports about
performed operations or changes on inputs. A library adding support to certain visualization and control software
packages is available.
For example, the device can Ethernet-enable a security panel or a PBX, turn appliances on or off, or send you an e-mail
saying "A mouse is in the mousetrap, remove it and add cheese" -without a need for any PC.
•
•
•
Controlled over WWW pages and TELNET
Able to send e-mail upon defined events
Support for "watchdog"-type applications
3ULFH
www.HW.cz / www.HW-server.com
- HW server
+:VHUYHU
www.HW-server.com
IrAMP – Remote IR PC Controll
This interface allows to control a PC remotely using an infrared remote control.
Supported by more than ten programs from all over the world due to compatibility with
the existing UIR standard. In a small box (3 x 1.5 x 4 cm), IrAMP has its own
microcontroller that recognizes encoding used by standard remotes and converts the
received sequence to 6 bytes that are then sent to the PC over RS232. Each 6-byte
sequence uniquely identifies its key on the remote.
The control software allows you to turn off your PC, run applications such as
WINAMP and control them remotely, etc. For example, you can set the
program to run WINAMP with a classics playlist whenever a certain button is
pressed on the remote, to switch to modern music playlist with another
button, control MUTE, fast forward, and close WINAMP. If WINAMP is not
active, the same buttons can be used to control your PowerPoint
presentation, TV card or sound card, insert characters, etc...
Product specification
•
•
•
•
•
•
•
•
No supply adapter necessary
Connects to RS232
Communicates at 9600Bd, 8N1
Fully compatible with RC5
Adaptive algorithm for other standards
Not compatible with IrDA.
WINAMP plugin is available
The GIRDER program allows remote control of the entire PC
3ULFH
PAtmel3 - KIT
Cheap programmer for AT89C5x, AT89Sxxxx, AT90Sxxx, AT89Cx051, AT24Cxx
with ISP support.
The PAtmel programmer version 3 supports most 51 and AVR series
microcontrollers by Atmel. The hardware supports all operations with the devices,
that is reading, writing, erasing and verification of the program and data
memories and setting of lock and fuse bits.
The component side of the board contains just 3 precision sockets for the
programmed devices in DIP8, DIP20 and DIP40 packages. Most devices can be
auto-detected by their signature bytes. The programmer also contains an ISP
connector for programming AVR's and certain x51 compatibles by Atmel in the
target system.
Features
•
Software:
- Windows95, 98
- Windows 2000, NT
- Windows XP
•
Actually supports:
- I2C Bus EEPROM
- x51 (AT89C5x, AT89Sxxxx)
- AVR
- MCUs with ISP support
•
Dimensions: 86 x 60 / height
15 [mm]
This speeds up debugging and development of applications. The programmed
device can be reset by clicking a button in the software toolbar.
The core of the programmer is an AT89C51 microcontroller that performs all
operations with the device being programmed. The target device is inserted into
one of the precision sockets. Power is supplied by an external 12V/300mA supply
with a coaxial connector, positive pole is inside. Power is indicated by the green
LED, operation in progress is indicated by the red LED. The programmer
connects to the computer via the serial port. All timing is controlled by the
microcontroller inside the programmer. This solution ensures the best support
possible in all operating systems. We can supply a complete KIT (populated and
tested PCB) or just the PCB and the microcontroller.
www.HW.cz / www.HW-server.com
3ULFH
- HW server
+:VHUYHU
www.HW-server.com
PonyProg KIT
PonyProg is a powerful programmer kit that supports a wide range of devices, is
controlled by simple software, and is available for a friendly price. The low price
comes at the cost of direct access to PC port hardware. External circuitry is
minimal, causing some problems in certain operating systems.
The main board contains sockets for most common devices. The PonyProg
software can control other devices (e.g. Siemens EEPROM-SDE2516,
SDE2526, and more), connected through external adapters, with the same user
interface.
The PonyProg software is mature, supports Windows NT. Contains a nice buffer
editor, fill functions, serial number generator, and supports even the standard
hardware interface of the STK 200/300 and other kits.
The hardware looks simple at a first glance; however, it is a result of complex
tradeoffs. It is adjusted to various interpretations of the RS232 standard by PC
manufacturers; for example, some notebooks output only 5V on their RS232
ports. Therefore, PonyProg implements a special low-drop 5V stabilizer that
operates at 50mA with just 0.2V drop. The programmer therefore works well in
"off-site" conditions; the RS232 serial port usually provides enough power to
program FLASH devices. For simpler operation and lower cost, we have used a
single-board solution with individual sections being switched using a ribbon cable
with PFL connectors.
Features
•
Connects to RS232.
•
Powered by RS232 currents or
external AC/DC adapter 5-30V
(more then 14V is necessary
for pragramming OTP PIC
MCUs).
•
User friendly software with
grafical interfaces and support
for scripts
•
Drivers:
- Windows95, 98
- Windows 2000, NT
- Intel Linux
- Win XP drivers is not
available yet
•
Actually supports:
- I2C Bus EEPROM
- Microwire EEPROM
- SPI EEPROM
- Atmel AVR & 51 (s ISP)
- Microchip PIC micro
Complete shipment contains a tested Hardware KIT, CD with software and
datasheets, and a printed manual.
Supports
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C64, 24C65, 24C128,
24C256, 24C512 I2C Bus EEPROM
24C325 and 24C645 I2C Bus EEPROM
Siemens SDE2516, SDE2526, SDA2546, SDA2586, SDA3546,
SDA3586 EEPROM (as 24XX Auto)
• Dimensions:
AT17C65, AT17C128, AT17C256, AT17C512, AT17C010 I2C Bus
140 x 74 / height 18 [mm]
EEPROM
Siemens SDE2506 EEPROM
AT90S1200, AT90S2313, AT90S2323, AT90S2343, AT90S4414,
AT90S4434, AT90S8515, AT90S8535 Flash micro
AT90S2323, AT90S2343, AT90S2333, AT90S4433, AT90S4434, AT90S8535, AT90S8534
AVR microcontroller ATmega103, ATmega161, ATmega163, ATmega 323, ATmega128, ATmega8, ATmega16,
AVR ATtiny microcontroller ATtiny12, ATtiny15 - read ATtiny12 and ATtiny15 Oscillator Calibration Byte, Write lock
bits to protect the AVR micro from reading
the AT89S8252 and AT89S53 micro
93C06, 93C46, 93C56, 93C57, 93C66, 93C76, 93C86, 93C13, 93C14
PIC 16F873/874/876/877, PIC 16F84A, PIC 12C508/509 micro
PIC 12C671/672 micro (untested)
25010, 25020, 25040 SPI EEPROM
25080, 25160, 25320, 25640, 25128, 25256, 25642 and 95640 Big SPI EEPROM
NVM3060 eeprom
MDA2061/MDA2062 eeprom
X2444/X2445 eeprom
3ULFH
www.HW.cz / www.HW-server.com
- HW server
+:VHUYHU
www.HW-server.com
PICQUICK
PICQUICK is very fast, reliable and cost effective development programmer for all
Microchip PIC microcontrollers and Microchip serial E2PROMs.
One of many great advantages of PICQUICK is its support for all PIC families and
device types - from the oldest to the latest ones. The user can choose the PIC
most appropriate for the given application and can be sure that he/she has the
equipment capable of programming the device at his/her desk.
Moreover - the most popular Microchip E2PROMs are also supported: the I2C
and MicroWire devices which are often used to extend the PIC-based system
memory capacity.
PICQUICK was developed as a very flexible equipment, with support for future
devices support mind. Since its introduction, all new device types were added using
software upgrade only! No firmware upgrades were necessary (which is another
cost advantage of PICQUICK in comparison to other programmers).
Software upgrades are freely available on the Internet. They contain support for
new devices, new functions, algorithm updates if required by Microchip and bug
fixes.
In-Circuit Serial Programming (ICSP) is a very useful and even more often used
PIC feature. PICQUICK directly supports this function using dedicated on-board
connector and cable. This is NOT a special option which must be purchased
separately - with PICQUICK it is the standard feature!
Overcurrent limitation of supply and programming voltage remarkably reduces risk
of damage of programmed part due to user mistakes.
The zero insertion force (ZIF) 40-pin programming socket allows easy device
handling. For non-DIP devices there are the special adaptors and pin converters
available.
The software allows easy editing of program memory, internal E2PROM and fuses.
Many options can be easily activated, such as the production mode.
Shipment contents
•
•
•
•
•
•
PICQUICK programmer unit
ICSP cable
Power supply adaptor
PC connection cable
Software (floppy or CD-ROM)
User's Manual
Supported devices
•
•
•
All available PICs
Microchip I2C E2PROMs
(24xxx)
Microchip MicroWire
E2PROMs (93xxx)
Features
•
•
•
•
•
•
•
•
•
•
•
Unlimited support of all PIC
families
New devices are added as
they appear on the market
Latest programming
algorithms maintained for all
devices
Free upgrade via Internet
ICSP support
Overcurrent limitation of
supply and programming
voltage
Zero insertion force
programming socket
Wide range of programming
adaptors for non-DIP devices
)DVWDQGFRPIRUWDEOH
RSHUDWLRQ
3URGXFWLRQPRGHDYDLODEOH
)DVW3&FRQQHFWLRQXVLQJ
WKHSDUDOOHOSRUW
3ULFH
www.HW.cz / www.HW-server.com
- HW server
+:VHUYHU
www.HW-server.com
MU Alpha
MU Alpha is a Real-Time In-Circuit Hardware Emulator for the most popular Microchip PIC® microcontrollers. It offers
many professional level features for extremely low price. It is designed to multiply your productivity and comfort of PIC
application development.
The emulator is based on the state-of-the-art programmable gate arrays,
which allows for the unique flexibility and functionality in comparison to
systems using the emulation chips.
The target device type, clock options and many other parameters are
simply software selectable - no confusing jumper settings, no
interchangeable oscillator modules are necessary. The user only has to
connect the target probe for 18-pin or 8-pin devices.
All device resources are available for user's application. Nothing is
blocked by emulator hardware or software. Moreover - Alpha offers the
excellent device resource accessibility even when running at full
application speed. You do not have to stop the real-time run to watch and
modify device registers.
Low voltage applications? No problem with MU Alpha. Target application
supply voltage can be as low as 2 V and your emulator still works fine. No
obvious 5 V only limitations.
Internal clock frequency synthesizer provides the clock in the range from
25 kHz to 20 MHz (full speed of emulated devices). The user can select
the crystal mode or RC mode with CLKOUT equal to Fosc/4. The
external clock up to 10 MHz and the external RC oscillator are the other
clock options.
Supported devices
•
•
•
•
•
PIC16F84/84A (20 MHz)
PIC12C508A
PIC12C509A
PIC16C54C
PIC16C56A
•
Coming soon:
PIC12C518/519
Target application independent functionality: Emulator can be used with
or without target system (which allows to test internal routines
independently of application - like a "real-time software simulator").
Extensive break logic possibilities: Unlimited number of breakpoints
anywhere in the code memory (activated BEFORE instruction execution).
Many other break conditions: file register breaks in data memory, Timer0
overflow, Trace buffer overflow, Watchdog timer overflow, Stack
overflow/underflow, Break on external probe (Trigger In).
32-bit instruction cycle counter - stopwatch - with overflow detection
accurately counts active cycles both in Run or Step modes. The time is
displayed in cycles and in microseconds. The second - differential counter is available.
Flexibility of emulator circuitry allows software upgrades (e.g. via Internet)
of the emulator hardware and even individual modifications with respect
to individual user's needs.
Trace memory with 256 instructions depth, tracing is fully user selectable
for arbitrary (even discontinuous) locations and areas.
Default device socket is DIP, SMD headers can be ordered as an option.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Non-compromised background debugging, all
device resources are user available
Target application power supply from 2 to 5.5V
Software selectable oscillator frequency and
other flexible clock frequency options
Target application independent functionality
(hardware simulator mode)
Extensive break logic possibilities
Flexible reset options
True HALT state
Trigger In and Trigger Out
32-bit instruction stopwatch
Flexible watchdog setting
Off-line mode
Well-arranged LED mode indication
Reconfigurable hardware
Trace memory, conditional trace
Compact mechanical construction
Fast PC interface via parallel port
Delivery contents
Software
•
•
Features
Console (DOS) version 1.41
Windows version: (incl. Hi-Tech PIC C Lite support)
•
•
•
•
•
•
•
Emulator
Power supply
PC connection cable
Target probe for 18-pin devices
Target probe for 8-pin devices
Software (floppy or CD-ROM)
User's Manual
3ULFH
www.HW.cz / www.HW-server.com
- HW server
+:VHUYHU
www.HW-server.com
MU Beta
MU Beta is a Real-Time In-Circuit Hardware Emulator for the most popular 18-pin and 8-pin Microchip PIC®
microcontrollers. It offers many professional level features for very low price. It is designed to multiply your productivity
and comfort of PIC application development.
The emulator is based on the state-of-the-art programmable gate arrays,
which allows for the unique flexibility and functionality in comparison to
systems using the emulation chips. The analogue peripherals are
designed to have the parameters very close to the original PIC MCUs.
The target device type, clock options and many other parameters are
simply software selectable - no confusing jumper settings, no
interchangeable oscillator modules are necessary. The user only has to
connect the target probe for 18-pin or 8-pin devices.
All device resources are available for user's application. Nothing is
blocked by emulator hardware or software. Moreover - MU Beta offers
the excellent device resource accessibility even when running at full
application speed. You do not have to stop the real-time run to watch and
modify device registers.
Low voltage applications? No problem with MU Beta. Target application
supply voltage can be as low as 2 V and your emulator still works fine. No
obvious 5 V only limitations.
Supported devices
•
•
•
•
•
•
•
•
PIC12C508A/509A
PIC16C54C/56A/58B
PIC16C710/711
PIC16C715
PIC16F84/84A
PIC16C554/558
PIC16C620A/621A/622A
PIC16F627*
Under development:
•
•
•
•
•
•
•
•
•
Internal clock frequency synthesizer provides the clock in the range from
25 kHz to 20 MHz (full speed of emulated devices). The user can select
the crystal mode or RC mode with CLKOUT equal to Fosc/4. The
external clock up to 10 MHz and the external RC oscillator are the other
clock options.
Target application independent functionality: Emulator can be used with
or without target system (which allows to test internal routines
independently of application - like a "real-time software simulator").
Extensive break logic possibilities: Unlimited number of breakpoints
anywhere in the code memory (activated BEFORE instruction execution).
Many other break conditions: file register breaks in data memory, Timer0
overflow, Trace buffer overflow, Watchdog timer overflow, Stack
overflow/underflow, Break on external probe (Trigger In).
32-bit instruction cycle counter - stopwatch - with overflow detection
accurately counts active cycles both in Run or Step modes. The time is
displayed in cycles and in microseconds. The second - differential counter is available.
Flexibility of emulator circuitry allows software upgrades (e.g. via Internet)
of the emulator hardware and even individual modifications with respect
to individual user's needs.
Trace memory with 256 instructions depth, tracing is fully user selectable
for arbitrary (even discontinuous) locations and areas.
Default device socket is DIP, SMD headers can be ordered as an option.
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Non-compromised background debugging, all
device resources are user available
Target application power supply from 2.5 to
5.5V
Software selectable oscillator frequency and
other flexible clock frequency options
Target application independent functionality
(hardware simulator mode)
Extensive break logic possibilities
Flexible reset options
True HALT state
Trigger In and Trigger Out
32-bit instruction stopwatch
Flexible watchdog setting
Off-line mode
Well-arranged LED mode indication
Reconfigurable hardware
Trace memory, conditional trace
Compact mechanical construction
Fast PC interface via parallel port Delivery contents
Software
•
•
PIC12CE518/519
PIC12C671/672
PIC12F629
PIC12F675 (10-bit?)
PIC16CE623/624/625
PIC16C712/716
PIC16C505*
rfPIC509 *
PIC16C432/433*
Console (DOS) version 1.41
Windows version: (incl. Hi-Tech PIC C Lite support)
•
•
•
•
•
•
•
Emulator
Power supply
PC connection cable
Target probe for 18-pin devices
Target probe for 8-pin devices
Software (floppy or CD-ROM)
User's Manual
3ULFH
www.HW.cz / www.HW-server.com
- HW server
+:VHUYHU
www.HW-server.com
M621 150 MHz Digital Storage Oscilloscope
Oscilloscope M621/I DSO occupies one 5¼" floppy disk drive slot or external version is available. All BNC connectors
are easy-to-access on a front panel. All you have to do is to slide the M621/I box into an empty floppy disk drive slot or
put the external version M621/E near the PC or notebook, plug in the power and parallel port data cable. Then install the
enclosed software and your new oscilloscope is ready to run. You can use standardized probes with the M621 DSO. The
on-board memory (32 KB per channel) is used as a storage for fast data acquisition, or as a circular buffer when
oscilloscope runs in ROLL MODE. In this mode, memory or hard-drive storage capacity limits the data record length.
The Scope software, which is enclosed in the package, creates very friendly and
easy-to-use environment, where you can control all oscilloscope function using
the mouse. The oscilloscope screen has all standard and some top notch
capabilities: horizontal and vertical cursors, reference cursors, adjustable trigger
level mark. The M621 DSO offers all standard functions that you can find in any
DSO. Therefore a user who knows how to work with standard DSO, will master
the M621 DSO in a very short period of time.
The fact that the M621 DSO need a computer to run has some great advantages.
It provides you with capabilities of storing and restoring the measured data,
saving and loading the control panel setup. It also allows you to process
measured data using various functions (FFT – Fast Fourier Transformation, for
example).
The M621 DSO has four different trigger modes: Auto, Normal, Single, Manual,
and can be triggered for the following sources: ChA, ChB and Ext. Trigger level
and slope can be selected using the Scope-621 software. The M621 DSO also
contains secondary trigger circuits, which allow you to specify the trigger event
even more detailed.
The package also includes a very detailed User’s Guide. Besides the User’s
Guide, the user can also use a context sensitive help, where he can find every
information about the oscilloscope controls. The Scope software also provides the
user with so-called "comics-text". This feature shows user the meaning of a
control element over which the mouse is positioned.
Features
•
Occupies one 5¼" floppy disk
drive slot or external version
•
Connected via LPT port
•
Two channels, 150 MHz
Bandwidth
•
50 MS/s real time and 5 GS/s
repetitive
•
10 mV/div to 5V/div in Nine
Vertical Voltage Range
•
150 MHz spectrum analyzer with
FFT using
•
ETC Scope software for
Windows 3.x, 95, 98, ME, NT,
2000 & Linux included
•
ETC M621 Development Kit
optionally available
•
Remote Oscilloscope
Technology
The Scope software is available in English for Windows 3.x, 95, 98, ME, NT &
2000 operating systems.
3ULFH
www.HW.cz / www.HW-server.com
- HW server
+:VHUYHU
www.HW-server.com
M631 Arbitrary Waveform Generator
The Arbitrary Waveform Generator ETC M631 is a hardware and software package that turns your PC to a dual channel
generator featuring a generation of analog signals and also digital events defined maximally by 262 144 points. The
resolution of a voltage waveform is 8 bit and a width of a digital word is 16 bit. The feature of the digital event generation
is available only with the use of the A631 digital adapter, which is not contained the basic package.
Software
The software, included in the package, changes your PC screen into a control
panel of a virtual generator and allows an easy access to all its functions by a
mouse. It is possible to generate standard waveforms such as sinus, saw,
triangle, rectangular and noise that are predefined. There is also an option for a
user-defined waveform generation. There are several editors that you can use to
define a continuous waveform. The graphical editor, where you can simply draw a
signal waveform; the harmonic editor, which synthesizes a signal from harmonic
components and the mathematical editor, where you can define a signal as a time
function, are parts of a basic package. It is possible to set the signal waveform,
level and magnitude of a superponated voltage (an one-directional shift) for each
channel independently. An external voltage using external modulation inputs can
set amplitude of the output signal. The frequency of a periodical signal of the B
channel can be set as an integer multiplication of the channel A frequency. A
phase shift between an output voltage of channel A and B can be set too. The
editor of digital signals, which is a part of the basic package, defines the
sequences of digital words.
The analog and digital signals can be generated in one of the following
modes:
1. periodical –output signals are generated periodically and they are not
influenced by a synchronization input
2. synchronized –output signals are synchronizes with a leading or trailing
edge of an external synchronization input
Features
•
16384 pixels / period up to 1,5
kHz. Increasing frequency
decreasing pixels / period.
•
Output signal may be externally
filtered by downpass filter (not
included, but you can order)
•
16 bit wide output word.
•
Generator output - D/A
converter 8bit.
•
Development Kit.
•
Connects to parallel (EPP) port.
3. triggered – generates a single period of a defined waveform after a
trigger event (a defined part of a synchronization input) occurs
4. single – generates a single period after a manual click on a control button on the PC screen
There is an option to buy the development kit M631 DK which allows users to write own applications for the generator
hardware.
Connecting to PC
The ETC M631 Generator belongs to the ETC Measuring Lab II (EML II) family. It is connected to PC via parallel port
(LPT) working in EPP mode (ver. 1.9) or EPP+ECP. It is possible to connect up to 15 devices of the EML II family while a
possibility to connect a printer persists. The M631 is available in two modifications. The internal modification (M631/I) is
mounted into PC as if 5¼" disk mechanics. The power supply is gained using the same connector as for disk mechanics.
The external modification (M631/E) is a stand-alone device connected to PC via standard parallel cable with its own
power adaptor. Minimum recommended computer requirements are PC486, EPP (V 1.9) or EPP+ECP, 8MB RAM, HD,
CD ROM, VGA 800x600, mouse or other pointing device, MS Windows 95/98/ME or NT/2000/XP.
3ULFH
www.HW.cz / www.HW-server.com
- HW server
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement