Cleanmaxx CMBP-6 Vacuum Operating instructions

CLEANMAX
Model CMBP-6
SCBP-1
Backpack Vacuum
OPERATING INSTRUCTIONS
COMMERCIAL
COMMERCIAL
BACKPACKVACUUM
VACUUMCLEANERS
CLEANER
BACKPACK
CONGRATULATIONS
ACQUIRED A HIGH
YOU HAVE JUST ACQUIRED
HIGH QUALITY
QUALITY VACUUM
VACUUM
CLEANER.PLEASE
PLEASEREAD
READTHIS
THISMANUAL
MANUALCAREFULLY,
CAREFULLY,
CLEANER.
BEFOREOPERATING
OPERATINGYOUR
YOURNEW
NEWVACUUM
VACUUMCLEANER.
CLEANER.
BEFORE
KEEPMANUAL
MANUALON
ONHAND
HANDFOR
FORFUTURE
FUTUREREFERENCE.
REFERENCE.
KEEP
Save These Instructions
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
*When using an electrical backpack vacuum cleaner, basic precautions should be followed.
*Read all instructions before using vacuum cleaner.
WARNING
WARNING
To reduce
risk is
of not
fire,intended
electric for
shock,
This
machine
use or
byinjury:
persons (including children) with
• Do notphysical,
use outdoors
or on
wet surfaces.
reduced
sensory
or mental
capabilities, or lack of experience
and
unless they
haveunattended
been given when
supervision
or in.
instruction
• Doknowledge,
not leave vacuum
cleaner
plugged
Turn off
concerning
use
of unplug
the machine
by a person
their
safety.
the switch
and
the electrical
cordresponsible
when not infor
use
and
before
servicing.
To reduce risk of fire, electric shock, or injury:
Donot
notuse
allow
to be used
a surfaces.
toy. Close attention is necessary when
•• Do
outdoors
or onas
wet
or near
children.
• Dused
o not by
leave
vacuum
cleaner unattended when plugged in. Turn off
• the
Use
only and
as described
this manual.
manufacturer’s
switch
unplug theinelectrical
cordUse
when
not in use and before
servicing.
recommended attachments.
•• DDo
o not
to bedamaged
used as acord
toy. Keep
children
and unauthorized
notallow
use with
or plug.
If vacuum
cleaner is notpersons
away from the machine when in use.
working as it should, has been dropped, damaged, left outdoors, or
• Use only as described in this manual. Use manufacturer’s recommended
dropped into water, return it to a service center before using.
attachments.
notuse
pullwith
or carry
by cord,
cord Ifasvacuum
a handle,
closeisanot
door
on
•• DDo
o not
damaged
corduse
or plug.
cleaner
working
or pullhas
a cord
sharp
edges or
run into
ascord,
it should,
beenaround
dropped,
damaged,
leftcorners.
outdoors,Do
ornot
dropped
water,
return
it to aover
service
center
using.from heated surfaces.
vacuum
cleaner
cord.
Keepbefore
cord away
•• WDo
ARNING
replacement
or outlets
repair of
damaged
wiringcurrent
should only be
not use- The
extension
cords or
with
inadequate
performed
by a qualified electrician or service engineer from the original
carrying capacity.
distributor or authorized service agent.
• Turn off all controls before unplugging.
• Do not pull or carry by cord, use cord as a handle, close a door on cord,
• orDo
nota handle
plug or
vacuum
cleaner
with wet
hands.
pull
cord around
sharp
edges
or corners.
Do not
run vacuum cleaner
• over
Do not
put
any cord
objects
into
openings.
Do not use with any opening
cord.
Keep
away
from
heated surfaces.
• Dblocked,
o not usekeep
extension
outlets
current
free ofcords
dust,orlint,
hair, with
and inadequate
anything that
may carrying
capacity.
reduce airflow.
•• TThis
urn off
all controls
before
unplugging.
vacuum
cleaner
creates
suction. Keep hair, loose clothing,
• Do not handle plug or vacuum cleaner with wet hands.
fingers, and all parts of body away from openings.
• Do not put any objects into openings. Do not use with any opening
• blocked,
Do not pick
anything
burning
or smoking,
as cigarettes,
keepup
free
of dust,that
lint,ishair,
and anything
that such
may reduce
airflow.
matches
or cleaner
hot ashes.
Do not
use without
dustloose
bag in
place. Use
• This
vacuum
creates
suction.
Keep hair,
clothing,
fingers,
extra
cleaning
on stairs.
and
all care
partswhen
of body
away from
openings.
•• DDo
o not
that is burning
or smoking,liquids
such as
cigarettes,
notpick
useup
to anything
pick up flammable
or combustible
such
as gasomatches
or hot
ashes.where
Do notthey
use may
without
bag in place. Use extra
line, or use
in areas
be dust
present.
care when cleaning on stairs.
• Store your cleaner indoors in a cool, dry area.
• Do not use to pick up flammable or combustible liquids such as gasoline,
• orDo
notinunplug
by pulling
cord.
To unplug, grasp the plug,
use
areas where
theyon
may
be present.
NOT
THE
CORD.
• Store your cleaner indoors in a cool, dry area.
• Do not unplug by pulling on cord. To unplug, grasp the plug,
NOT THE CORD. THIS MODEL IS GROUNDED, CONNECT
TO A PROPERLY GROUNDED OUTLET ONLY THIS MODEL IS GROUNDED, CONNECT
SEE GROUNDING INSTRUCTIONS.
TO A PROPERLY GROUNDED OUTLET ONLY SEE GROUNDING INSTRUCTIONS.
GROUNDING INSTRUCTIONS
This appliance
must be grounded. If it should malfunction or breakdown,
GROUNDING
INSTRUCTIONS
This
appliance
must abepath
grounded.
it should malfunction
breakdown,
grounding
provides
of leastIfresistance
for electric or
current
to
grounding
a path This
of least
resistance
for electric
current
to having
reduce theprovides
risk of shock.
appliance
is equipped
with
a cord
reduce the risk of shock. This appliance is equipped with a cord having
an equipment-grounding conductor and grounding plug. The plug must
an equipment-grounding conductor and grounding plug. The plug must
be inserted
inserted into
intoan
anappropriate
appropriateoutlet
outletthat
thatisisproperly
properlyinstalled
installedand
and
be
grounded in
in accordance
accordancewith
withall
alllocal
localcodes
codesand
andordinances.
ordinances.
grounded
WARNING - Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. Check with a qualified electrician or
service person if you are in doubt as to whether the outlet is properly
grounded. Do not modify the plug provided with the appliance - if it will
not fit the outlet, have a proper outlet installed by a qualified electrician.
WARNING - Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. Check with a qualified electrician or
This appliance
for use
ondoubt
a normal
volt circuit,
andishas
a grounded
service
person ifisyou
are in
as to120
whether
the outlet
properly
plug that looks
like
the plug
in sketch
A. appliance
A temporary
grounded.
Do not
modify
the illustrated
plug provided
with the
- if itadapter
will
similar
to outlet,
that shown
fig B and
C may
be used
connectelectrician.
this plug to
not
fit the
have in
a proper
outlet
installed
by ato
qualified
This
appliance
is for as
useshown
on a normal
circuit,grounded
and has outlet
a grounded
a 2-pole
receptacle
in fig B120
if a volt
properly
is not
plug
that looks
the plugadapter
illustrated
in sketch
A. Aonly
temporary
adapter
available.
The like
temporary
should
be used
until a properly
similar to that shown in fig. B and C may be used to connect this plug to
grounded outlet (fig A) can be installed by a qualified electrician, The
a 2-pole receptacle as shown in fig. B if a properly grounded outlet is not
green colored
rigid ear, lug,
or the
like extending
for the
must be
available.
The temporary
adapter
should
be used only
untiladapter
a properly
connectedoutlet
to a permanent
suchbyasa aqualified
properlyelectrician,
grounded The
outlet box
grounded
(fig. A) can ground
be installed
cover. colored
Whenever
is used,
it must befor
held
place by
a metal
green
rigidthe
ear,adapter
lug, or the
like extending
thein
adapter
must
be
connected
to a permanent ground such as a properly grounded outlet box
screw.
cover. Whenever the adapter is used, it must be held in place by a metal
screw.
Note: In Canada, the use of a temporary adapter is not permitted by the
Canadian
Electrical
Note:
In Canada,
the Code.
use of a temporary adapter is not permitted by the
Canadian Electrical Code.
SAFETY PRECAUTIONS
• Do not vacuum water or liquids.
SAFETY PRECAUTIONS
• Do not vacuum up hard or sharp objects, as they may damage the
• Do
not
vacuum
water
or
liquids.
hose, vacuum bag or the
vacuum motor.
• Do not vacuum up hard or sharp objects, as they may damage the hose,
• vacuum
Do not drop
the
vacuum
the floor.
bag or the vacuumonmotor.
•• Do
Donot
notdrop
operate
the
vacuum
while
it is standing on high-pile carpet.
the vacuum on the floor.
the exhaust
is not restricted.
• DIto is
notessential
operate that
the vacuum
whileairflow
it is standing
on high-pile carpet. It is
that the
exhaustthe
airflow
not restricted.
• essential
Do not wash
or launder
clothisvacuum
bag, doing so will destroy
• Dthe
o not
wash or
launderofthe
vacuum bag, doing so will destroy the
filtration
capacity
thecloth
fabric.
filtration capacity of the fabric.
• Do not kink or twist the power cord.
• Do not kink or twist the power cord.
notattempt
attempttotoservice
servicethe
thevacuum
vacuumyourself.
yourself.
Repair
anyone
•• DDo
o not
Repair
byby
anyone
other
other
an authorized
repair service
center
the warranty.
than
anthan
authorized
repair service
center may
voidmay
the void
warranty.
MAINTENANCE
MAINTENANCE
• Clean the cloth vacuum bag regularly. After emptying the vacuum
• Clean the cloth vacuum bag regularly. After emptying the vacuum bag,
bag, turn it inside out and shake as much dust out of the fabric as
turn it inside out and shake as much dust out of the fabric as possible.
possible.performance
Optimum performance
by using
a paper
Optimum
is achievedisbyachieved
using a paper
vacuum
bag with the
vacuum
cloth
bag. bag with the cloth bag.
• Check
Always unwind the cable completely.
Checkthe
thepower
powercord
cordfor
fordamage.
damage.
• EAlways
nsure that
the vacuum
hose,
the extension wand and the vacuuming
unwind
the cable
completely.
blocked.
• accessories
Ensure thatare
thenot
vacuum
hose, the extension wand and the
• Ensure the electrical outlet and the plug are securely connected. Incorrect
vacuuming accessories are not blocked.
connections may cause sparking and damage to the cable socket.
that
the electrical
outlet
and the
plug
are securely
•• HEnsure
ave your
backpack
vacuum
serviced
by an
authorized
repair service
connected.
Incorrectany
connections
may cause sparking and damage
center
if you suspect
potential problems.
• Use
onlycable
approved
paper vacuum bags.
to the
socket.
•• EHave
nsureyour
that Backpack
the flexiblevacuum
vacuumserviced
bag ring by
provides
a properrepair
seal before
an authorized
service
vacuuming.
center if you suspect any potential problems.
• Use only approved paper vacuum bags.
• Ensure that the flexible vacuum bag ring provides a proper seal
before vacuuming.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects
or other reproductive harm.
OPERATION INSTRUCTIONS
How To Change the Bag
Pleaseread
readthe
thefollowing
following operating
operating instructions carefully. They
Please
They will
will help
help you
youtotoget
get
thebest
bestperformance
performance from
from this
this professional
professional quality vacuum
the
vacuum cleaner
cleaner and
and to
to
maintainititininoptimum
optimum condition.
condition.
maintain
Turn off main power
switch and unplug unit
from wall outlet.
Follow these
these simple
simple steps
steps for
Follow
for easy
easy and
and effective
effective
operation of
of the
the Backpack
backpack vacuum.
operation
vacuum.
Open the lid and ensure that the cloth bag is correctly located and the flexible
Open the lid and ensure that the cloth bag is correctly located and the flexible
ring provides a proper seal when the lid is closed. For optimum filtration, it is
ring provides a proper seal when the lid is closed. For optimum
advisable to use a paper vacuum bag in addition to the standard cloth bag.
filtration, it is advisable to use a paper vacuum bag in addition to the standard
cloth bag.
If you use a paper vacuum bag, simply insert it into the cloth bag, making sure
that the cardboard disk is centered on the flexible sealing ring. When you replace
Ifthe
youlid,
use
papernozzle
vacuum
bag,
simply
into
clothinto
bag,
theashort
in the
center
of insert
the liditwill
bethe
forced
themaking
centralsure
that
the
cardboard
disk
is
centered
on
the
flexible
sealing
ring.
When
you seal.
replace
hole of the cardboard disk of the paper vacuum bag thus providing a tight
the
lid, sure
the short
nozzle
in the bag
center
of the secured
lid will be
forced
into the
central
hole
Make
the paper
vacuum
is tightly
over
the short
nozzle
before
ofvacuuming.
the cardboard
disk
of
the
paper
vacuum
bag
thus
providing
a
tight
seal.
Make
Lock the lid down with the two latches. Always ensure that the
sure
the paper
bag isvacuuming.
tightly secured over the short nozzle before
vacuum
bag is vacuum
empty before
vacuuming.
Your backpack vacuum comes equipped with a manual reset thermal fuse
Lock
the lidThis
down
with the
two latches.
Always
vacuumvacuum
bag is
protector.
thermal
protector
is designed
to ensure
protect that
yourthe
backpack
from overheating
due to aYour
cutoff
in airflowvacuum
(i.e. clogged
hose).
Should
thisa Manual
empty
before vacuuming.
Backpack
comes
equipped
with
situation
occur,Fuse
the thermal
fuse
protector
willprotector
safely shut
off your backpack
Reset
Thermal
Protector.
This
thermal
is designed
to protect your
vacuum tovacuum
avoid any
potential
damage.
Backpack
from
overheating
due to a cutoff in airflow (i.e. clogged hose).
Should this situation occur, the thermal fuse protector will safely shut off your
How To reset the thermal fuse:
Backpack vacuum to avoid any potential damage.
1. Unplug the vacuum cleaner. Locate and correct the problem (over filled bag,
clog in hose, clogged filters,
etc.). the thermal fuse:
To reset
Turn off main power switch and
unplug unit from wall outlet.
Remove vacuum hose from top
of unit.
Remove vacuum hose
from top of unit.
Release the two latches and
lift off lid.
Separate lid from paper bag
insert and dispose of paper
Releasebag.
the two
latches and lift off lid.
1. Unplug the vacuum cleaner. Locate and correct the problem (over filled bag,
2.clog
Locate
"tripped"
fuse,filters,
the small
red button located on the bottom of the main
in hose,
clogged
etc.).
body.
2. Locate "tripped" fuse the small red button located on the bottom of the main
3.body.
Using a pencil, paper clip, or other pointy object, push the reset button.
3. Using a pencil, paper clip, or other pointy object, push the reset button.
4.4.Plug
PlugBackpack
backpack vacuum
vacuum in
in and begin using.
addition,your
yourBackpack
backpack vacuum
vacuum has
InInaddition,
has been
been fitted
fitted with
with aathermal
thermaloverload
overloadswitch
switch
protectthe
themotor
motor against
against damage
damage should
should the
totoprotect
the airflow
airflow be
be blocked
blocked for
forextended
extended
periods.This
Thismay
may occur
occur ifif the
the vacuum
vacuum bag
bag is
periods.
is overfull
overfull or
or ifif the
the vacuum
vacuumhose
hoseisis
blocked. The vacuum motor will stop before it can get too hot. If this happens,
blocked. The vacuum motor will stop before it can get too hot. If this happens,
empty and thoroughly clean the vacuum bag or free any blockage and ensure
empty and thoroughly clean the vacuum bag or free any blockage and ensure
that adequate airflow is restored. The motor will automatically restart after it has
that adequate airflow is restored. The motor will automatically restart after it has
cooled to a safe operating temperature.
cooled to a safe operating temperature.
1. The vacuum hose is fitted into the cuff in the lid. It should not be necessary to
1. The
vacuum
hoseinis normal
fitted into
the cuff in the lid. It should not
remove
the hose
operation.
be necessary to remove the hose in normal operation.
2. Place the backpack vacuum on your back, adjust the shoulder straps until
2. Place
thecomfortable
Backpack vacuum
your back,
adjust
the
shoulder
straps
you feel
and thenontighten
the waist
belt.
The
backpack
vacuum is
until
you feel
comfortable
then
tighten
the waistcomfort.
belt. The
designed
to ride
higher onand
your
back
for maximum
Backpack vacuum is designed to ride higher on your back for
comfort.
3.maximum
Plug the cord
into a 110 volt, grounded outlet. Always unwind the cord
completely before vacuuming. It is important to maintain the power cord in
goodthe
condition.
This
unitvolt,
shipsgrounded
with a 50'outlet.
16AWG
x 3 conductor
SJT
extension
3. Plug
cord into
a 110
Always
unwind the
cord
cord. Always
use avacuuming.
16x3 SJT extension
cord to
when
operating
this unit. Use care
completely
before
It is important
maintain
the power
when
the cord around
sharp
edges
cord
inpulling
good condition.
This unit
ships
with and
a 50'through
16AWGdoorways.
x 3 conductor
SJT extension cord. Always use a 16x3 SJT extension cord when
Never operate
theUse
backpack
vacuumpulling
if the power
cordaround
is damaged
operating
this unit.
care when
the cord
sharpin any way.
edges and through doorways
4. Attach the extension wand to the hose and fit the floor tool or any of the other
vacuuming accessories on the wand.
Never operate the Backpack vacuum if the power cord is damaged in any way.
5. Turn the vacuum on. The switch is located on the side of the machine.
4. Attach the extension wand to the hose and fit the floor tool or
any of the other vacuuming accessories on the wand.
5. Turn the vacuum on. The switch is located on the side of the machine.
Separate lid from paper
bag insert and dispose
Remove cloth filter of
bag,
clean,
paper
bag.
dust and replace.
Insert new paper bag making
sure to align lid nozzle with bag
hole and replace latches.
How To Replace the HEPA Media Filter
1. R
elease the two latches and lift off
the lid.
2. R
emove the cloth filter bag and paper
bag insert.
Remove cloth filter bag,
3. P
ull
theand
filterreplace.
cover up and out.
clean,
dust
4. R
emove the used HEPA Media filter
and replace.
5. S
nap the filter cover into place.
6. R
eplace the cloth filter bag and paper
bag insert.
How To Replace The Exhaust Filter
emove the filter cover on the bottom
Insert new paper bag1. R
of the vacuum.
making sure to align lid
emove the used filter and replace.
nozzle with bag hole and2. R
replace latches.3. R
eplace the filter cover.
Model
SCBP-1
Parts
Model
CMBP-6
ref #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
item #
54.110
54.112
A352-8100
A352-8200
A430-0205
A732-8300
54.100
06.011
06.415
CMBP-10
B352-3200
B352-6100
B352-6800
B352-6800-NUT
54.101
B352-0200
54.108
CMBP-FP
CMBP-BP
54.109
54.111
54.107
B352-0700
54.106
06.434
54.105
54.104
54.103
B352-1900
B352-4800
06.083
C352-2800
20.011
B113-0915
B352-5800
B352-6600
B352-6700
B352-1800
B352-5300
B352-5400
B352-5500
B352-5600
B352-5700
NOT ILLUSTRATED
05.160
05.161
10.308
10.310
10.309
19.452
26.125
14.206
description
THERMAL PROTECTION SWITCH
LATCH
#10 .750 TYPE B PHILIPS PAN HEAD SCREW
#6 X .375 HI-LO PHILIPS PAN HEAD SCREW
#8-16 X 2.500 PHILIPS PAN HEAD SCREW
#8 X .625 HI-LO PHILIPS PAN HEAD SCREW
BACK REST ASSEMBLY 32, 33, 34, 39, 40
POST FILTER
PAPER BAG - 10 PACK
POWER HARNESS
BAG COMPARTMENT SEAL
STRAIN RELIEF
STRAIN RELIEF NUT
MOTOR COMPARTMENT
BUMPER
FRONT PLATE
BACK PLATE
COVER
HOSE INLET
MOTOR COVER
SECONDARY FILTER PLATE
SECONDARY FILTER PLEATED
SECONDARY FILTER CAP
POST FILTER FRAME
BODY SEAL
BOTTOM MOTOR MOUNT
INLET SEAL
SHAKE OUT BAG
SWITCH HARNESS
5.1" SINGLE STAGE MOTOR
MOTOR SHROUD PC
SHOULDER HARNESS STRAP
WAIST BELT
SHOULDER STRAP BUCKLE
TOP MOTOR MOUNT
MOTOR SHROUD BOTTOM 5.1 - 1 STAGE
MOTOR SHROUD TOP 5.1 - 1 STAGE
MOTOR SEAL
RIGHT SHOULDER HARNESS
LEFT SHOULDER HARNESS
CREVICE TOOL
UPHOLSTRY TOOL
DUST BRUSH TOOL ASSEMBLY
CARPET TOOL ASSEMBLY
BARE FLOOR TOOL
HOSE ASSEMBLY
TELESCOPIC WAND
50' EXTENSION CORD 16-3 SJT YELLOW
CLEANMAX
BACKPACK
VACUUM
CARPET PRO
BACKPACK VACUUM
Themanufacturer
manufacturer warrants
purchaser
thatthat
the the
Carpet
Pro Backpack
Vacuum
is freeisfrom
providedprovided
it is
The
warrantstotothe
theoriginal
original
purchaser
CleanMax
Backpack
Vacuum
freedefects,
from defects,
it is
operated and
and maintained
with
written
manuals
or other
instructions
for a for
period
of 90 days
from
date
of purchase
operated
maintainedininaccordance
accordance
with
written
manuals
or other
instructions
a period
of one
year
from
date of on
workmanship,
motor, and parts.
If service
is required,
please
return to please
place ofreturn
purchase.
purchase
on workmanship,
motor,
and parts.
If service
is required,
to place of purchase.
Register your CleanMax vauum online at www.cleanmaxvacuums.com
CLEANMAX
866-785-1595
www.cleanmaxvacuums.com