Velleman WS9611 Owner Manual

Add to my manuals
46 Pages

advertisement

Velleman WS9611 Owner Manual | Manualzz

WIRELESS 868 MHz WEATHER CLOCK

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this fancy Weather Clock with wireless 868MHz transmission of outdoor temperature and display of indoor temperature and humidity. It is further acting as a DCF-77 radio controlled clock with calendar display and alarm clock function. In addition, sunrise/ sunset/ sun duration time as well as the moon phase are shown. With the totally 15 different weather forecast icons featured by "Weather man", users can easily observe the forecast weather condition and will no longer worry the sudden weather change. This innovative product is ideal for use in the home or office.

« Instant Transmission+» is the up and coming state-of-the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE

TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor data measured from the transmitters: follow your climatic variations in real-time!

49

FEATURES:

The Weather Clock

LCD Display

Battery compartment cover

Function

Keys

DCF-77 Radio controlled time with manual setting options

DCF Time reception ON/OFF

12/24 hour display

Calendar (weekday, date, month and year)

Time zone option ±12 hours

Function

Keys

Hour, minute and second time display

Foldout

Stand

Hanging hole

50

Alarm with snooze function

Snooze setting

Weather forecasting with 15 easy-to-read weather forecast signs featured by "Weather man"

Weather forecasting icon sensitivity setting

Temperature display in degrees Celsius (°C) or Fahrenheit (°F) selectable

Indoor and outdoor temperature display with MIN/MAX recording

Indoor humidity reading displayed as RH% with MIN/MAX recordings

All MIN/MAX temperature recordings show date and time received

All MIN/MAX recordings can be reset

Display of sunrise time, sunset time and sun duration in 39 cities

12 Moon phases display throughout the year

Can take up to three outdoor transmitters

LCD contrast setting

Low battery indicator

LED backlight

Table standing/ Wall mounting

51

The Outdoor Temperature Transmitter

Remote transmission of outdoor temperature to Weather

Clock by 868 MHz

Shower proof casing

Wall mounting case (Mounting at a sheltered place. Avoid direct rain and sunshine)

SETTING UP :

When one transmitter is used

1. First, insert the batteries into the Temperature transmitter. (see “Install and replace

batteries in the Temperature transmitter“).

2. Immediately after and within 45 seconds, insert the batteries into Weather Clock

(see “Install and replace batteries in the Weather Clock”). Once the batteries are in place, all segments of the LCD will light up briefly. Following the time as 0:00 and the "Weather man" icon will be displayed. If these are not displayed after 60 seconds, remove the batteries and wait for at least 10 seconds before reinserting them.

52

3.

4.

After inserting the batteries, the Weather Clock will start receiving data from the transmitter. The outdoor temperature and the signal reception icon should then be displayed on the Weather Clock. If this does not happen after 3 minutes, the batteries will need to be removed from both units and reset from step 1.

In order to ensure sufficient 868 MHz transmission however, this should under good conditions be a distance no more than 100 meters between the final position of the

Weather Clock and the transmitter (see notes on “Positioning” and “868 MHz

5.

Reception”).

Once the remote temperature has been received and displayed on the Weather

Clock, the DCF time (radio controlled time) code reception is automatically started.

This takes typically between 3-5 minutes in good conditions. If after 10 minutes, the

DCF time has not been received, press the SET key to manually enter a time initially.

When more than one transmitter is used

1. User shall remove all the batteries from the Weather Clock and transmitters and wait

2. for 60 seconds if setting has been done with one transmitter before.

Insert the batteries to the first transmitter.

3. Within 25 seconds of powering up the first transmitter, insert the batteries to the

Weather Clock. Once the batteries are in place, all segments of the LCD will light up briefly. Following time as 0:00 and the Weather man icon will be displayed. If they are not shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them.

53

4. The outdoor temperature from the first transmitter (channel 1) should then be displayed on the Weather Clock. Also, the signal reception icon will be displayed. If

5. Insert the batteries to the second transmitter as soon as the outdoor temperature readings from the first transmitter are displayed on the Weather Clock. this does not happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1.

Note: User shall insert the batteries into the second transmitter within 10 seconds of reception of the first transmitter.

6. The outdoor data from the second transmitter and the "channel 2" icon should then be

7. displayed on the Weather Clock. If this does not happen after 2 minute, the batteries will need to be removed from all the units and reset from step 1.

Insert the batteries to the third transmitter as soon as the "channel 2" icon and outdoor data are displayed on the Weather Clock. Then within 2 minutes, the channel 3 outdoor data from the third transmitter will be displayed and the channel icon will shift back to "1" once the third transmitter is successfully received. If this is not happen, user shall restart the setting up from step 1.

Note:

• User shall insert the batteries into the third transmitter within 10 seconds of reception of the second transmitter.

• And user may require to check the displayed readings on the Weather Clock against

54

those shown on the transmitters in order to recognise the Channel No. of each transmitter.

8. In order to ensure sufficient 868 MHz transmission however, this should under good conditions be a distance no more than 100 meters between the final position of the

Weather Clock and the transmitter (see notes on “Positioning” and “868 MHz

Reception”).

IMPORTANT:

Transmission problems will arise if the setting for additional sensors is not followed as described above. Should transmission problems occur, it is necessary to remove the batteries from all units and start again the set-up from step 1.

9. Once the remote temperature has been received and displayed on the Weather

Clock, the DCF time (radio controlled time) code reception is automatically started.

This takes typically between 3-5 minutes in good conditions.

If after 10 minutes, the DCF time has not been received, press the SET key to manually enter a time initially.

Note:

Daily DCF reception is done at 02:00 and 03:00 every day. If the reception at 03:00 is not successful, then at 04:00 and 05:00 and 06:00 there are other tries, until one is successful. If

55

the reception at 06:00 is still not successful, then the next try takes place at 02:00 next day.

If reception is successful, the received time will override the manually set time. The date is also updated with the received time. (Please refer also to notes on “DCF-77 Radio

Controlled time” and “Manual Time Setting”)

INSTALL AND REPLACE BATTERIES IN THE WEATHER CLOCK

The Weather Clock uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the batteries, please follow the steps below:

1. Remove the cover at the back of the

Weather Clock.

2. Insert batteries observing the correct polarity (see marking).

56

INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER

The Temperature Transmitter uses 2 x AA, IEC LR6, 1.5V battery. To install and replace the batteries, please follow the steps below:

1. Remove the battery compartment cover at the back of the transmitter.

2. Insert the batteries, observing the correct polarity (see marking).

Replace the battery compartment cover on the unit. 3.

Note:

In the event of changing batteries in any of the units, all units need to be reset by following the setting up procedures. This is because a random security code is assigned by the transmitter at start-up and this code must be received and stored by the Weather Clock in the first 3 minutes of power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units (Battery life See Specifications below).

Please participate in the preservation of the environment. Return used batteries to an authorised depot.

57

FUNCTION KEYS:

Weather Clock:

The Weather Clock has five easy to use function keys.

SET key

MIN/ MAX key

SNOOZE/ SUN key

58

ALM key

CH/ + key

SET key (Setting):

To enter the set mode for the following functions: LCD contrast, Time zone, Time

Reception ON/OFF, 12/24 hour display, Manual time, Year, Date, Sunrise/ sunset city location, Snooze time duration, °C/°F, and Weather forecast sensitivity settings.

To toggle between the display of "Weekday + date + month", "Second", "Alarm time", and "Date + month + year"

To press and hold for 3 seconds to reset at the same time the maximum/ minimum

• temperature and humidity records of indoor and the currently selected outdoor channel

(will reset all records to current level)

To stop the alarm

To switch on the backlight

MIN/ MAX

To toggle between the maximum/ minimum outdoor temperature and maximum/ minimum indoor temperature and humidity data

Note: The Time/date shown is corresponding to MIN/MAX temperature data.

To stop the alarm

To switch on the backlight

ALM key (alarm)

Press for about 3 seconds to enter the Alarm setting mode

To activate/ deactivate the alarm

59

To stop the alarm

To switch on the backlight

CH/ + key

To toggle between the Outdoor transmitters 1, 2 and 3 (if more than 1 transmitter is

• used)

To adjust LCD contrast, time zone, Time Reception ON/OFF, 12/24 hour display, hour,

• minute, year, month, day, snooze time duration, °C/ °F and weather forecasting icon sensitivity in setting modes

To adjust the alarm time in alarm setting mode

To stop the alarm

To switch on the backlight

SNOOZE/ SUN key

To activate the snooze function for the alarm

To toggle between the sunrise time, sunset time, sun duration in the Sun display

To exit manual setting mode and alarm setting mode

To switch on the backlight

60

LCD SCREEN AND SETTINGS:

Alarm icon

DCF Tower

Icon (for time reception)

Time

Calendar

Moon phase display

Sunrise/ sunset display

Weather

Tendency icon

Weather Clock low battery icon

Indoor

Temperature

Indoor Relative

Humidity %

Transmitter low battery icon

Outdoor

Temperature

Weather Forecast icon (Weather man)

Number showing

Outdoor

Reception

Transmitter unit

Signal*

61

*When the signal from the transmitter is successfully received by the Temperature Station, this icon will be switched on. (If not successful, the icon will not be shown on the LCD). User can therefore easily see whether the last reception was successful (“ON” icon) or not (“OFF” icon). On the other hand, the short blinking of the icon shows that a reception is being done at that time.

For better distinctness the LCD screen is split into 5 .

Section 1 - TIME AND CALENDAR

In normal mode display of radio controlled time.

A reception tower symbol will be shown indicating that the DCF-77 time signal is scanned for (flashing) or received (steady).

Note: The symbol will not be shown when radio time reception is not successful or when time reception function is turned off.

Display of "Weekday + date + month", "Second", "Alarm time" or "Date + month +

• year"

In normal display, the alarm icon will be shown when the alarm is turned on. Or when the snooze function is activated, the alarm icon will be flashing.

Section 2 - Moon phase and Sunrise / Sunset

Display the sunrise, sunset, and sun duration time

Display the 12 different moon phase

62

Section 3 - WEATHER ICON (FEATURED BY WEATHER MAN)

Display of the weather to be expected in form of 15 fancy weather symbols (featured by Weather man) which change their appearance depending on the air pressure

• development and the current outdoor temperature.

Format of the weather man icons refers to the "

WEATHER FORECAST AND

TENDENCY

"

Section 4 - INDOOR TEMPERATURE AND HUMIDITY

Display of the current indoor temperature and humidity.

By pressing the MIN/ MAX key, display of the stored MIN/MAX indoor temperature and humidity, with simultaneous display of MIN/ MAX symbol in Section 5.

Section 5 - OUTDOOR TEMPERATURE

Display of the current outdoor temperature.

By pressing the MIN/ MAX key, display of the stored MIN/MAX outdoor temperature

• with simultaneous display of a MIN or MAX symbol.

By pressing the CH/ + key, display of outdoor sensors (up to three outdoor transmitters). The number 1, 2 or 3 will be shown.

A signal reception symbol will be shown indicating that receiver is receiving outdoor temperature.

DCF-77 RADIO CONTROLLED TIME:

The time base for the radio controlled time is a Cesium Atomic Clock operated by the

63

Physikalisch Technische Bundesanstalt Braunschweig which has a time deviation of less than one second in one million years. The time is coded and transmitted from Mainflingen near Frankfurt via frequency signal DCF-77 (77.5 kHz) and has a transmitting range of approximately 1,500 km. Your radio-controlled Weather Clock receives this signal and converts it to show the precise time in summer or wintertime. The quality of the reception depends greatly on the geographic location. In normal cases, there should be no reception problems within a 1,500 km radius around Frankfurt.

Once the outdoor temperature is displayed on the Weather Clock after initial set-up, the DCF tower icon in the clock display will start flashing in the upper left corner. This indicates that the clock has detected that there is a radio signal present and is trying to receive it. When the time code is received, the DCF tower becomes permanently lit and the time will be displayed.

If the tower icon flashes, but does not set the time or the DCF tower does not appear at all, then please take note of the following :

Recommended distance to any interfering sources like computer monitors or TV sets

• is a minimum of 1.5 - 2 meters.

Within ferro-concrete rooms (basements, superstructures), the received signal is naturally weakened. In extreme cases, please place the unit close to a window and/or point its front or back towards the Frankfurt transmitter.

MANUAL SETTINGS:

The following manual settings can be done in the setting mode:

64

LCD contrast setting

Time zone setting

Time reception ON/OFF setting

12/24-Hour setting

Manual time setting

Calendar setting

Sunrise/ Sunset city location

Snooze setting

°C/ °F setting

Weather forecasting icon sensitivity setting

Press and hold the SET key for about 3 second to advance to the setting mode:

LCD CONTRAST SETTING

flashing

The LCD contrast can be set to 8 different levels to suit the users needs (default LCD contrast setting is LCD 5). To set the desired contrast level:

65

1. The above display will be seen. Press the CH/ + key to select the level of contrast desired.

2. Press the SET key to confirm and enter the “Time Zone setting” or exit the setting mode by pressing the SNOOZE/ SUN key

TIME ZONE SETTING:

flashing

The time zone default of the Weather Clock is 0. To change to another time zone:

1. Press the SET key after completing the LCD contrast setting in order to enter the time

2. zone setting (flashing).

Using the CH/ + key, set the time zone. The range runs from 0 to +12 and then runs from -12 back to 0 in consecutive 1hour intervals.

3. Press the SET key to confirm and enter the “Time Reception ON/OFF setting” or exit the setting mode by pressing the SNOOZE/ SUN key

66

TIME RECEPTION ON/OFF SETTING

Flashing (time reception icon)

Digit flashing

In area where reception of the DCF-77 time is not possible, the DCF-77 time reception function can be turned OFF. The clock will then work as a normal Quartz clock (Default setting is ON).

1.

2.

The digit “ON” and the time reception icon will start flashing on the LCD.

Use the CH/ + key to turn OFF the time reception function.

3. Confirm with the SET key and enter the “12/24-Hour Display setting” or exit the setting mode by pressing the SNOOZE/ SUN key.

Note:

If the Time Reception function is turned OFF manually, the clock will not attempt any

67

reception of the DCF time as long as the Time Reception OFF function is activated.

The Time Reception icon will not be displayed on the LCD.

12/24 HOUR TIME DISPLAY SETTING

flashing

1. After setting time reception ON/OFF, press the SET key, “12h” or “24h” flashes in the

LCD. (default 24 h)

2. Press the CH/ + key to select the “12h” or “24h” display mode.

3. Press the SET again to confirm and to enter the “Manual Time setting” or exit the setting mode by pressing the SNOOZE/ SUN key.

Note: When 24h mode display is selected, the calendar format will be date and month display. When 12h mode display is selected, the calendar format will be month and date display.

68

MANUAL TIME SETTING

In case the Weather Clock is not able to detect the DCF-signal (disturbances, transmitting distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock.

Hours (flashing)

Minutes (flashing)

To set the clock :

1. The hour and minute digits start flashing in the time display section.

2. Use the CH/ + key to adjust the hours and then press SET key to go to the minute setting.

3.

4.

The minute will be flashing. Press the CH/ + key to just the minutes.

Confirm with the SET key and enter the “Calendar Setting” or exit the setting mode

Note:

by pressing the SNOOZE/ SUN key

The unit will still try to receive the signal at each full hour despite it being manually set.

When it does receive the signal, it will change the manually set time into the received time.

69

During reception attempts the DCF tower icon will flash. If reception has been unsuccessful, then the DCF tower icon will not appear but reception will still be attempted the following hour.

CALENDAR SETTING

Year

"Date. Month." (for 24h time display)

"Month. Date." (for 12h time display)

The date default of the Weather Clock is 1. 1. of the year 2005 after initial set-up. Once the radio-controlled time signals are received, the date is automatically updated. However, if the signals are not received, the date can also be set manually. To do this:

70

1.

2.

3.

4.

5.

Using the CH/ + key, set the year required. The range runs from 2005 to 2029 (default is 2005).

Press the SET key to enter the month setting mode.

The month digit will be flashing. Press the CH/ + key to set the month and then press the SET key to go to the date setting.

The date digit will be flashing. Press the CH/ + key to set the date.

Confirm with the SET key and enter the “Sunrise, sunset and sun duration” or exit the setting mode by pressing the SNOOZE / SUN key.

SUNRISE, SUNSET AND SUN DURATION

The Sun Clock will automatically calculate the sunrise, sunset and sun duration time based on the city location and the set date. (see “Sun setting“)

1. The short form of city name will start flashing (default “F“). Using the CH/ + key, select the city location:

Short form of City location

(flashing)

71

39 cities can be chosen from and every city is displayed in short-form

(e.g.: AMS --> Amsterdam).

The cities are displayed as follows:

F- Frankfurt

FL - Flensburg

LYO - Lyon

M - München

PAR - Paris

ROM - Roma

H - Hannover

HB - Bremen

HEL - Helsinki

HH - Hamburg

HRO - Rostock

MAD - Madrid

MAR - Marseille

MD - Magdeburg

MIL - Milano

MZ - Mainz

BAI - Bari

BAR - Barcelona

S - Stuttgart

SB - Saarbrücken

SEV - Sevilla

STO - Stockholm

BOL - Bologna

BOR - Bordeaux

BRU - Brüssel

CPH - Copenhagen

VIE - Vienna (Wien) D - Düsseldorf

INS - Insbruck

LDN - London

LUX - Luxemburg

2.

N - Nürnberg

NAN - Nantes

OSL - Oslo

ZRH - Zürich

AMS - Amsterdam

B - Berlin

DD - Dresden

EF- Erfurt

Confirm with the SET key and enter the “Snooze setting" or exit the setting mode by pressing the SNOOZE / SUN key.

72

SNOOZE SETTING:

flashing

The snooze time can be set OFF or to a maximum time of 30 minutes (default is 10 minutes):

1. The snooze time (in minute) digit will be flashing. Use the CH/ + key to set the snooze

2. time (in minute). Each pressing of the key will increase the snooze time by 5 minutes.

The snooze can also be set OFF when the “OFF” digit is being displayed.

Confirm with the SET key and enter the “ºC / ºF temperature unit setting” or exit the

Note:

manual setting mode by pressing the SNOOZE/ SUN key.

If the snooze time has been set “OFF”, the snooze function will not be activated.

73

°C/°F TEMPERATURE UNIT SETTING

flashing

The default temperature reading is set to °C (degree Celsius). To select °F (degree

Fahrenheit):

1. The “°C” will be flashing, use the CH/ + key to toggle between “°C” and “°F”.

2. Once the desired temperature unit has been chosen, confirm with the SET key and enter the “Weather Forecast Icon Sensitivity setting” or exit the setting mode by pressing the SNOOZE/ SUN key.

WEATHER FORECASTING ICON SENSITIVITY SETTING

For locations with rapid changes of weather conditions, the threshold can be set to a different level for faster display of changing weather conditions.

Using the CH/ + key to set the weather sensitivity level. There are 3 levels of setting: 1, 2 and 3; level 1 is the most sensitive setting, level 3 is the least sensitive setting (default setting is "2").

74

flashing flashing

Confirm with the SET key and exit the Manual settings.

75

ALARM SETTING:

Alarm icon flashing flashing

To set alarm:

1. Press and hold ALM for about 3 seconds until the alarm time display flashes.

2. The hour digit and the alarm icon will be flashing. Press the CH/ + key to adjust the

3.

4.

5. hour.

Press ALM button once and minute digit will be flashing. User shall then press CH/ + button to set the minute.

Press ALM button once to confirm the setting.

To activate/ deactivate the alarm function, press the ALM button once. The display of the alarm icon represents that the alarm is "ON".

76

Note: The duration of alarm sounding is 120 seconds

SNOOZE SETTING AND STOPPING THE ALARM:

1. When the alarm is sounding, press the SNOOZE/ SUN key to activate the snooze function. The alarm will stop and re-activate after the time interval of the snooze time

2. pre-set by user.

To stop the alarm completely, press any keys other than the SNOOZE/ SUN key.

77

WEATHER FORECAST AND TENDENCY:

The weather forecast icons (Weather man):

One of the 15 different weather icons (featured by Weather man with different clothing) is displayed in the centre of LCD, which indicates the different forecast weather condition due to air pressure level (Sunny, Sunny + Cloudy or Cloudy + Rainy) and the current outdoor temperature (Temperature value detected by Channel 1):

26°C

19 – 25.9

°C 10 – 18.9°C

0 – 9.9

°C <

Sunny

78

Sunny +

Cloudy

Cloudy +

Rainy

26°C

19 – 25.9

°C 10 – 18.9°C

0 – 9.9

°C <

26°C

19 – 25.9

°C 10 – 18.9°C

0 – 9.9

°C <

79

For every sudden or significant change in the air pressure, the weather icons will update accordingly to represent the change in weather. If the icons do not change, then it means either the air pressure has not changed or the change has been too slow for the Weather

Projection Station to register. However, if the icon displayed is a sun or raining cloud, there will be no change of icon if the weather gets any better (with sunny icon) or worse (with rainy icon) since the icons are already at their extremes.

The icons displayed forecasts the weather in terms of getting better or worse and not necessarily sunny or rainy as each icon indicates. For example, if the current weather is cloudy and the rainy icon is displayed, it does not mean that the product is faulty because it is not raining. It simply means that the air pressure has dropped and the weather is expected to get worse but not necessarily rainy.

Note:

After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours. This will allow sufficient time for the Weather Clock to collect air pressure data at a constant altitude and therefore result in a more accurate forecast.

Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather forecasting feature is estimated to have an accuracy level of about 75% due to the varying areas the Weather Clock has been designed for use in. In areas that experience sudden changes in weather (for example from sunny to rain), the Weather Clock will be more accurate compared to use in areas where the weather is stagnant most of the time (for example mostly sunny).

80

If the Weather Clock is moved to another location significantly higher or lower than its initial standing point (for example from the ground floor to the upper floors of a house), remove the batteries and re-insert them after about 30 seconds. By doing this, the Weather Clock will not mistake the new location as being a possible change in air-pressure when really it is due to the slight change of altitude. Again, disregard weather forecasts for the next 12 to 24 hours as this will allow time for operation at a constant altitude.

THE WEATHER TENDENCY INDICATOR

Working together with the weather icons are the weather tendency indicators (the upward and downward arrow located near the Weather man). When the indicator points upwards, it means that the air-pressure is increasing and the weather is expected to improve, but when indicator points downwards, the air-pressure is dropping and the weather is expected to become worse.

Therefore, user may see how the weather has changed and is expected to change. For example, if the indicator is pointing downwards together with cloudy icons, it means that the last noticeable change in the weather was when it was sunny (the sunny icon only).

Therefore, the next change in the weather will be the cloudy icons since the indicator is pointing downwards.

Note:

Once the weather tendency indicator has registered a change in air pressure, it will remain permanently visualized on the LCD.

81

DISPLAY OF INDOOR TEMPERATURE AND HUMIDITY READING:

The indoor temperature and humidity are measured automatically and displayed on the fourth section of the LCD.

Indoor Relative

Humidity %

Indoor

Temperature

in °C

Minimum icon

82

DISPLAY OF OUTDOOR TEMPERATURE:

Outdoor Reception

Symbol

Outdoor temperature in

°C

Maximum icon

Transmitter identification

No. (only shown when more than one transmitter is used)

The last LCD section shows the outdoor temperature, a reception symbol and a channel number under the temperature will also show if more than one transmitter has been used.

DISPLAY OF INDOOR MAXIMUM AND MINIMUM RECORDS:

1. In normal display mode, press the MIN/ MAX button three times. The maximum indoor temperature and humidity will be shown. Also the date and time of recording this temperature will be displayed.

83

2. Press the MIN/ MAX button once more to display the minimum indoor temperature and humidity. Also the date and time of recording this temperature will be displayed.

RESETTING THE INDOOR MAXIMUM/ MINIMUM RECORDS

1.

2.

In normal display mode, press the MIN/ MAX button to advance to the MIN/ MAX display.

Press and hold the SET key for about 3 seconds, this will reset all indoor minimum and maximum data recorded to the current time, date, temperature and humidity.

The max/ min temperature of the currently selected outdoor channel will also be rest at the same time

DISPLAY OF OUTDOOR MAXIMUM AND MINIMUM RECORDS:

1. In normal display mode, press the CH/ + button to select the desired channel. The

2.

3. channel ID will be displayed above the outdoor temperature reading.

Press the MIN/MAX button, the max temperature of the selected channel will be displayed. Also the date and time of recording this temperature will be displayed.

Press the MIN/MAX button once more, the min temperature of the selected channel will be shown. Press the ALM button to go back to the normal display mode.

RESETTING THE OUTDOOR MAXIMUM/ MINIMUM RECORDS

Note: It is required to reset The outdoor max min temperature records of different channels separately.

84

1. In normal display mode, press the CH/ + button to select a channel. The channel ID will be displayed above the outdoor temperature reading.

Note: The transmitter number will only be displayed if more than one transmitter is

applied.

2. Press the MIN/ MAX button once. The max icon will be displayed.

3. Press and hold the SET button for about 3 seconds, this will reset all outdoor minimum and maximum temperature recorded to the current time, date and temperature.

Note: The max/ min temperature records of the indoor channel will also be reset at the same time.

SUNSET/ SUNRISE/ SUN DURATION TIME:

Sunrise/ sunset display

Sunrise time/ Sunset time/ Sun duration time

Shortform of City name

Press the SNOOZE/ SUN key to toggle between the sunrise, sunset, and sun duration time:

85

Sunrise time

Sunrise icon

Sunset time

Sunset icon

86

Sunrise time

Sunset time

Sun duration time (total number of hours of sunlight on the day)

Sun duration time icon

Sun duration time

(hh:mm)

THE MOON PHASE

The Moon icon of the Weather Clock will also display 12 different Moon phases according to the set calendar.

Note: In the southern hemisphere, the phases of the moon are same but the shape of the moon is mirror inverted.

Full Moon Large Waning

Gibbous

Small Waning

Gibbous

Last Quarter Large Waning

Crescent

Small Waning

Crescent

New Moon

Small Waxing

Crescent

Large Waxing

Crescent

First Quarter

Small W axing

Gibbous

Large Waxing

Gibbous

87

LED BACK-LIGHT

The LED back-light will be automatically switched ON when any key is pressed. The LED back-light will be switched on for approximately 9 seconds before automatically switching

OFF.

TEMPERATURE TRANSMITTER:

The range of the Temperature transmitter may be affected by the temperature. At cold temperatures the transmitting distance may be decreased. Please bear this in mind when placing the transmitter.

868 MHz RECEPTION

The Weather Clock should receive the temperature data within 5 minutes after set-up. If the temperature data is not received 5 minutes after setting up (not successfully 3 times continuously, the outdoor display shows “- - -” ), please check the following points:

1.

2.

3.

4.

The distance of the Weather Clock or transmitter should be at least 1.5 to 2 meters away from any interfering sources such as computer monitors or TV sets.

Avoid positioning the Weather Clock onto or in the immediate proximity of metal window frames.

Using other electrical products such as headphones or speakers operating on the same signal frequency (868MHz) may prevent correct signal transmission and reception.

Neighbors using electrical devices operating on the 868MHz signal frequency can also cause interference.

88

Note:

When the 868MHz signal is received correctly, do not re-open the battery cover of either the transmitter or Weather Clock, as the batteries may spring free from the contacts and force a false reset. Should this happen accidentally then reset all units (see Setting up above) otherwise transmission problems may occur.

The transmission range is about 100 m from the transmitter to the Weather Clock (in open space). However, this depends on the surrounding environment and interference levels. If no reception is possible despite the observation of these factors, all system units have to be reset (see Setting up).

POSITIONING

WEATHER CLOCK:

The Weather Clock comes complete with a foldout stand that gives the option of table standing or wall mounting.

To wall mount:

1. Fix a screw into the desired wall, leaving the head extended out the by about 5mm.

2. Using the Weather Clock’s hanging hole, carefully hang it onto the screw.

Note: Always ensures that the unit locks onto the screw head before releasing.

89

POSITIONING THE TEMPERATURE TRANSMITTER:

The Transmitter is supplied with a holder that may be attached to a wall with the two screws supplied. The Transmitter can also be position on a flat surface by securing the stand to the bottom to the

Transmitter.

To wall mount:

1. Secure the bracket onto a desired wall using the screws and plastic anchors.

2. Clip the remote temperature sensor onto the bracket.

90

Note:

Before permanently fixing the transmitter wall base, place all units in the desired locations to check that the outdoor temperature reading is receivable. In event that the signal is not received, relocate the transmitters or move them slightly as this may help the signal reception.

CARE AND MAINTENANCE :

Extreme temperatures, vibration and shock should be avoided as these may cause

• damage to the unit and give inaccurate forecasts and readings.

When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the LCD and casings.

Do not submerge the unit in water.

Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of the recommended type.

Do not make any repair attempts to the unit. Return them to their original point of purchase for repair by a qualified engineer. Opening and tampering with the unit may invalidate their guarantee.

Do not expose the units to extreme and sudden temperature changes, this may lead to rapid changes in forecasts and readings and thereby reduce their accuracy.

SPECIFICATIONS:

Temperature measuring range:

Indoor : -9.9ºC to +59.9ºC with 0.1ºC resolution

91

(14.1°F to +139.8°F with 0.2°F resolution, “OF.L” displayed if outside this range)

Outdoor : -39.9ºC to +59.9ºC with 0.1ºC resolution

(-39.8°F to +139.8°F with 0.2°F resolution, “OF.L” displayed if outside this range)

Relative humidity measuring range:

Indoor : 1% to 99% with 1% resolution (displays “- -” when lower than

1 %; displays "99" % if higher than 99 %)

Indoor temperature checking interval : every 15 seconds

Indoor humidity checking interval : every 20 seconds

Outdoor temperature reception : every 4 seconds

Power supply:

Weather Clock

Temperature transmitter

: 2 x AA, IEC, LR6, 1.5V

: 2 x AA, IEC, LR6, 1.5V

Battery life cycle (Alkaline batteries recommended)

Approximately 24 months

Approximately 24 months

Weather Clock

Temperature transmitter

Dimensions (L x W x H)

Weather Clock :

Temperature transmitter :

:

:

124.3 x 28.4 x 92.5 mm

38.2 x 21.2 x 128.3 mm

92

LIABILITY DISCLAIMER :

The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in wild country and/or in unauthorized grounds strongly damages the

• environment.

Please contact your local or/and regional authorities to retrieve the addresses of legal dumping grounds with selective collection.

All electronic instruments must from now on be recycled. User shall take an active part in the reuse, recycling and recovery of the electrical and electronic waste.

The unrestricted disposal of electronic waste may do harm on public health and the quality of environment.

As stated on the gift box and labeled on the product, reading the “User manual” is highly recommended for the benefit of the user. This product must however not be thrown in general rubbish collection points.

The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should an inaccurate reading take place.

This product is designed for use in the home only as indication of the temperature.

This product is not to be used for medical purposes or for public information.

The specifications of this product may change without prior notice.

This product is not a toy. Keep out of the reach of children.

No part of this manual may be reproduced without written authorization of the manufacturer.

93

R&TTE Directive 1999/5/EC

Summary of the Declaration of Conformity : We hereby declare that this wireless transmission device does comply with the essential requirements of R&TTE Directive

1999/5/EC.

94

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals