Advertisement
Advertisement
HAI Omni Quick Reference Guide
Arming your system:
Pressing any of the arming buttons twice, or pressing any of the arming buttons once followed by your code will arm the system in the desired mode.
Arming Buttons:
Adding or changing codes:
Press 9 + your code + 1 (Code). You are now at “Code 1” this is the Master code slot. Enter the code you would like (4 digits) and press #. To add an additional user code scroll down to “Code 2” and enter a new code (4 digits) and press #.
Bypassing a zone:
Press 2 + 8 + Scroll down to the desired zone and press # then your code.
(To un-bypass press 2 + 9 + 0 + # + your code)
Panic Buttons:
Press & hold as shows below to activate panic alarms (Note: Immediate Dispatch)
Hold buttons 1 & 3 for POLICE
Hold buttons 4 & 6 for FIRE
Hold buttons 7 & 9 for MEDICAL
Resetting System & Clearing Troubles:
If you have any “trouble” type messages always try pressing * to clear the system
If the system is beeping and you are unsure why try pressing * to clear the system
If you have a fire alarm you must arm and disarm the system to reset your system
To cancel false alarms or test your system call – (913) 432-4545
For sales or service for you Atronic alarm call -- (913) 362-0000
YOU MAY CALL EITHER OF THESE NUMBERS AFTER HOURS TO REACH OUR 24 hr
EMERGENCY TECHNICAL SUPPORT TECHNICIAN
WWW.ATRONICALARMS.COM

Public link updated
The public link to your chat has been updated.
Advertisement