multi-loop module type temperature controller

multi-loop module type temperature controller
User’s Manual
MULTI-LOOP MODULE TYPE
TEMPERATURE CONTROLLER
<Enhanced Communication Module
(Ethernet)>
TYPE: PUMCE
INP-TN5A2052a-E
2
INP-TN5A2052-E
Please Read First (Safety Warnings)
Please read this section thoroughly before using and
observe the mentioned safety warnings fully.
Safety warnings are categorized as "Warning", "Caution" or
"Risk of Electrical Shock".
Warning
Improper use of the equipment may result in death
or serious injuries.
Caution
Improper use of the equipment may cause injury or
property damage.
Risk of
Electrical
Shock
Indicates that a risk of electrical shock is present
and the associated warning should be observed.
Warranty
Period of warranty
Warranty period for this product including accessories is one
year after delivery.
Scope of warranty
(1) If any failure or malfunction attributable to Fuji Electric
occurs in the period of warranty, we will replace the
product or failed parts without charge. Please note that,
in the case where our engineer needs to visit your place
for replacement, we cannot provide commissioning and/
or readjustment for whole system including our product
at repair or replacement of failed parts.
Scope of application
●● This equipment must be used under the following
conditions:
- the use of the equipment incurs no risk of a serious
accident even if a failure or malfunction occurs on the
equipment, and
- in case of product failure or malfunction, safety
measures such as redundant design, prevention of
malfunction, fail safe system, foolproof mechanism are
provided outside of the equipment.
●● This product is designed and manufactured as a generalpurpose product for general industrial applications.
●● The warranty does not apply to the following cases:
- for the use not described in or beyond the conditions or
environment specified in the instruction manual or the
user manual,
- for the use which has large influence on publicity
including nuclear power and other power generation,
gas, and/or water,
- for the use in which safety is especially required,
because it may seriously affect railroads, vehicles,
combustion equipment, medical equipment,
entertainment devices, safety equipment, defense
equipment, and/or human lives and property.
However, we will study the possibility of application of the
equipment for the above use, if the user limits the usage of it
and agrees to require no special quality. Please consult us.
The warranty does not apply to failure or malfunction
resulting from:
a) Between the temperature sensor and the location
where the voltage reaches or generates the values
described below, secure clearance space and
creepage distance as shown in the table below.
b) other devices or software not originate in Fuji
Electric,
c) improper use, or an alteration or repair that is not
performed by Fuji Electric,
d) factors that do not originate in the purchased or
delivered product,
e) damages incurred during transportation or fall after
purchase,
f)
factors that were not foreseeable by the practical
application of science and technology at the time of
purchase or delivery,
g) any reason that Fuji Electric is not responsible for,
including a disaster or natural disaster such as
earthquake, thunder, storm and flood damage, or
inevitable accidents such as abnormal voltage.
(2) Regardless of the time period of the occurrence, Fuji
Electric is not liable for the damage caused by the
factors Fuji Electric is not responsible for, opportunity
loss of the purchaser caused by malfunction of Fuji
Electric product, passive damages, damage caused
due to special situations regardless of whether it was
foreseeable or not, and secondary damage, accident
compensation, damage to products that were not
manufactured by Fuji Electric, and compensation
towards other operations.
INP-TN5A2052-E
3
Period for repair and provision of spare parts after
product discontinuation (maintenance period)
The discontinued models (products) can be repaired for five
years from the date of discontinuation.
Also, most spare parts used for repair are provided for five
years from the date of discontinuation. However, some
electric parts may not be obtained due to their short life
cycle. In this case, repair or provision of the parts may be
difficult in the above period.
•• In cases where damage or problems with this equipment
may lead to serious accidents, install appropriate external
protective circuits.
•• To prevent damage and failure of the equipment, provide
the rated power voltage.
•• To prevent electric shock and equipment failure, do not
turn the power ON until all wiring is complete.
•• Before turning the power ON, confirm that clearance
space has been secured to prevent shock or fire.
•• Do not touch the terminal while the machine is ON. Doing
Please contact Fuji Electric or its service providers for further
information.
so risks shock or equipment errors.
•• Never disassemble, convert, modify or repair this
equipment.Doing so risks abnormal operation, shock or
fire.
Warnig
•• All of the wiring should be class 1 type wiring or the low
voltage wires are routed separately from the hazardous
Installation and Wiring
●● This equipment is intended to be used under the following
conditions.
voltage wires to ensure separation of circuits.
•• When using a AWG-16 cable, you should use the crimp
terminal that material thickness is 0.9mm or less.
Ambient temperature
-10 to 50 degree C
Ambient humidity
90% RH or below (with no
condensation)
Vibration
10 to 70Hz less than 9.8m/s² (1G)
Warm-up time
30 min. or more
Installation category
IEC61010-1: class II
Pollution level
IEC61010-1: degree 2
Maintenance
•• When installing or removing the equipment, turn the power
OFF. Otherwise, shock, operational errors or failures may
be caused.
•• Periodic maintenance is recommended for continuous and
●● Between the temperature sensor and the location where
the voltage reaches or generates the values described
below, secure clearance space and creepage distance as
shown in the table below.
If such space cannot be secured, the IEC61010-1 safety
safe use of this equipment.
•• Some parts installed on this equipment have a limited life
and/or may deteriorate with age.
•• The warranty period for this unit (including accessories) is
one year, if the product is used properly.
compliance may become invalid.
Voltage used or generated by
any assemblies
Clearance Space Creepage Space
[mm]
[mm]
Up to 50 Vrms or Vdc
0.2
1.2
Up to 100 Vrms or Vdc
0.2
1.4
Up to 150 Vrms or Vdc
0.5
1.6
Up to 300 Vrms or Vdc
1.5
3.0
Above 300 Vrms or Vdc
Please consult our distributor
●● For the above, if voltage exceeds 50Vdc (called danger
voltage), functional insulation is required between the
earth and all terminals of the equipment.
Note that the insulation class for this equipment is as
follows. Before installing, please confirm that the insulation
class for equipment meets usage requirements.
Power supply
Loader communication
Functional insulation
(AC 1000 V)
4
Ethernet
Functional insulation
(AC 500 V)
INP-TN5A2052-E
Service life
This product, excluding limited-life parts, is designed for a
service life of 10 years under general operating conditions.
Limited-life parts and consumable parts
•• Locations that build up heat from radiant heat sources,
etc.
•• A switch or circuit breaker shall be included in the building
installation. Please be it in close proximately to the
equipment and within easy reach of the operator, and
mark it as the disconnecting device for the equipment.
Warranty period for this product including accessories is one
year after delivery.
●● Aluminum electrolytic capacitor
- Designed service life: 10 years under general working
conditions
- Symptoms when a capacitor loses its capacity:
deterioration of power quality, malfunction
- Factors which affect capacitor life: temperature
The life is shortened by half when the temperature rises
by 10°C. (Arrhenius' law)
- Replacement: Estimate the lifetime of capacitor
according to your operating environment, and have the
capacitor replaced or overhauled at appropriate time, at
least once in 10 years.
Do not use capacitors beyond its lifetime. Otherwise,
electrolyte leakage or depletion may cause odor, smoke, or
fire. Please contact Fuji Electric or its service providers when
an overhaul is required.
Caution
Caution when Installing
For install in UL listed enclosure only.
Please avoid installing in the following locations.
•• Locations in which the ambient temperature falls outside
the range of 0 to 50 degrees C when equipment is in use.
•• Locations in which the ambient humidity falls outside the
range of 45 to 85% RH when equipment is in use.
•• Locations with rapid temperature changes, leading to dew
condensation.
•• Locations with corrosive gases (especially sulfide gas,
ammonia, etc.) or flammable gases.
•• Locations with vibration or shock directly.
Caution when Mounting to Cabinets/DIN Rails
•• In case of mounting the temperature controllers to DIN
rails, remember to push up the locking tabs to fasten the
controllers onto DIN rail.
•• To connect controllers, first release all locking tabs. Then,
connect controllers and push up all locking tabs. Make
sure that all locking tabs are fastened.
•• Never fail to turn the power OFF, before detaching the
terminal block or removing the main unit from the base
part.
•• In order to aid heat dissipation, do not block the top and
the bottom of the equipment.
•• When mounting/dismounting controllers to /from DIN
rails, 30mm of clearance above and under the controllers
should be provided.
Caution for Wiring
•• For wiring to the terminal block, apply crimp type terminals
size M3.
Use terminal screws in this product only.
Screw size: M3×7 (with square washer)
Screw tightening torque:0.78 N • m (8kgf • cm)
•• To avoid the influence of inductive noise, input signal wires
should be separated from electric power lines or load
lines.
•• To use the RS-232C communication, attach noise filters
to the AC power lines. (Not necessary, provided that the
noise suppression of the power line is thoroughgoing)
•• To comply with CE marking (EMC), we recommend to
attach ferrite core to communication cable and power
cable.
•• Locations in contact with water, oil, chemicals, steam or
hot water.
(If the equipment gets wet, there is a risk of electric shock
or fire, so have it inspected by Fuji distributor.)
•• Locations with high concentrations of atmospheric dust,
salt or iron particles.
Error Operation
•• The alarm function does not work properly when an error
occurs unless the settings are made correctly. Always
verify its setting before operation.
•• Locations with large inductive interference, resulting in
static electricity, magnetic fields or noise.
•• Locations in direct sunlight.
INP-TN5A2052-E
5
Others
•• Please do not wipe the equipment with organic solvents
such as alcohol or benzene, etc. If wiping is necessary,
use a neutral cleaning agent.
•• Do not use mobile phones near this equipment (within
50cm). Otherwise a malfunction may result.
•• Malfunctions may occur if the equipment is used near a
radio, TV, or wireless device.
•• This equipment requires approx. 5 to 30 seconds before it
starts to output.
•• Before installing and wiring, take necessary measures for
electrostatic discharge (ESD).
•• The power supply for this product is 24V DC. Please use
the power source of appropriate volume depending on the
number of units you connect.
Recommended power supply:
Cosel Electronics Co., Ltd. PBA Series
Omron Corporation S8VM Series
6
INP-TN5A2052-E
Contents
Please Read First (Safety Warnings)… ………………… 3
3 Installation… …………………………… 3-1
Scope of application… …………………………………… 3
3.1 Installation Procedure… …………………………………3-3
Warranty… ………………………………………………… 3
Installation procedure… ……………………………………3-3
Period of warranty… ……………………………………… 3
3.2 Dimensions… ……………………………………………3-4
Scope of warranty… ……………………………………… 3
External dimension… ………………………………………3-4
Period for repair and provision of spare parts after product
3.3 Mounting Modules… ……………………………………3-5
discontinuation (maintenance period)… ………………… 4
How to attach/detach the base part from the main unit…3-5
Warning… ……………………………………………… 4
Mounting to DIN rails… ……………………………………3-6
Installation and Wiring……………………………………… 4
Order of modules……………………………………………3-8
Maintenance………………………………………………… 4
3.4 Attaching Accessories (Optional)… ……………………3-9
Service life…………………………………………………… 5
Attaching side connecting terminal covers… ……………3-9
Limited-life parts and consumable parts… ……………… 5
Attaching endplates…………………………………………3-9
Caution… ……………………………………………… 5
3.5 Mounting with Screws… ……………………………… 3-10
Cautions when Installing…………………………………… 5
3.6 Connection……………………………………………… 3-11
Cautions when Mounting to Cabinets/DIN Rails………… 5
Ethernet connection……………………………………… 3-11
Cautions for Wiring… ……………………………………… 5
Connecting modules… ………………………………… 3-13
Error Operation……………………………………………… 5
Wiring for power supply… ……………………………… 3-13
Others……………………………………………………… 6
1 Overview… ……………………………… 1-1
4 System Configuration… …………… 4-1
4.1 Ethernet… …………………………………………………4-3
1.1 Overview… ………………………………………………1-3
Ethernet setting… …………………………………………4-3
1.2 Model Code… ……………………………………………1-4
4.2 Bridge Communication……………………………………4-6
Ethernet communication module… ………………………1-4
PUMCE setting………………………………………………4-9
Accessories (Optional)… …………………………………1-4
Operation of bridge communication… ……………………4-8
1.3 Part Names and Functions………………………………1-5
4.3 Mapping Communication…………………………………4-9
External view…………………………………………………1-5
PUMCE setting………………………………………………4-9
Front… ………………………………………………………1-6
Parameter setting………………………………………… 4-10
Main part (Back face)… ……………………………………1-7
Operation of mapping communication………………… 4-13
Base part… …………………………………………………1-8
4.4 Micrex-SX Programless Communication… ………… 4-14
2 System Configuration Example…… 2-1
2.1 System Configuration Example for
Modbus/TCP Communication……………………………2-3
2.2 System Configuration Example for
Micrex-SX Programless Communication… ……………2-5
PUMCE setting…………………………………………… 4-14
SX communication setting… …………………………… 4-14
SX device setting………………………………………… 4-19
Operation of programless communication… ………… 4-22
Operation of reading demand/response flag… ……… 4-26
Operation of setting demand/response flag…………… 4-31
Operation of command setting demand/response flag… 4-36
INP-TN5A2052-E
7
5 Communication………………………… 5-1
Setup parameters………………………………………… 5-79
5.1 Modbus/TCP………………………………………………5-3
System parameters……………………………………… 5-81
Message composition………………………………………5-3
Alarm parameter… ……………………………………… 5-84
5.2 Micrex-SX Loader Communication… …………………5-7
5.3 Status………………………………………………………5-8
Communication module status… …………………………5-8
Programless communication status… ……………………5-9
5.4 Address Map and Data Format… …………………… 5-10
Communication module status… ……………………… 5-10
Communication status with Micrex-SX………………… 5-10
Ethernet communication setting… …………………… 5-11
SX communication setting… …………………………… 5-11
SX device setting………………………………………… 5-12
Setting area registration………………………………… 5-13
Monitor area registration………………………………… 5-14
Temperature control module internal communication
6.1 Loader Communication Functions………………………6-3
Connection with PC…………………………………………6-3
6.2 Loader Communication Specifications…………………6-4
Loader interface… …………………………………………6-4
6.3 Loader Connection… ……………………………………6-5
Communication terminal……………………………………6-5
Connection with a loader communication port… ………6-5
6.4 Setting Loader Communication Parameters… ………6-6
Setting items for loader interface (The equipment)… …6-6
6.5 MODBUS Communication Protocol… …………………6-7
Message composition………………………………………6-9
statusn… ………………………………………………… 5-15
Error check code (CRC-16) calculation… …………… 6-12
Register number order… ……………………………… 5-17
Transmission control procedure… …………………… 6-13
5.5 Setting/Monitor Area Entry Numbers
6 Loader Communications… ………… 6-1
6.6 Command and Transmission Frame Details… …… 6-15
(Control module)… …………………………………… 5-52
Reading data……………………………………………… 6-15
Operation parameter… ………………………………… 5-52
Writing data… …………………………………………… 6-20
Control (PID) parameters… …………………………… 5-53
Setup parameters………………………………………… 5-54
System parameters……………………………………… 5-56
Ramp/soak… …………………………………………… 5-61
Valve control……………………………………………… 5-63
7 Trouble Shooting……………………… 7-1
7.1 Error Procedure…………………………………………7-3
Troubles during operation… ………………………………7-3
Troubles during loader connection… ……………………7-7
Alarm parameters………………………………………… 5-64
Communication parameters… ………………………… 5-66
Configuration parameters… …………………………… 5-69
Monitor Parameters……………………………………… 5-69
5.6 Setting/Monitor Area Entry Numbers
(Event module)………………………………………… 5-71
Operation parameters…………………………………… 5-71
Digital Input parameters………………………………… 5-71
Digital output parameters… …………………………… 5-73
Communication parameters… ………………………… 5-76
Configuration parameters… …………………………… 5-76
Monitor parameters……………………………………… 5-77
Internal DO data area…………………………………… 5-77
5.7 Setting/Monitor Area Entry Numbers
(Analog module)… …………………………………… 5-78
Operation parameters…………………………………… 5-78
8
INP-TN5A2052-E
1 Overview
1.2
Model Code…………………………………… 1-4
1.3
Part Names and Functions………………… 1-5
3 Installation
Overview… …………………………………… 1-3
2 System Configuration Example
1.1
4 System Configuration
5 Communications
6 Loader Communications
7 Trouble Shooting
1-1
INP-TN5A2052-E
Overview
1
1.1 Overview
1-2
INP-TN5A2052-E
1.1 Overview
1.1 Overview
An enhanced communication module, PUMCE enables multi-loop module type temperature controller, PUM series (hereinafter
referred to as PUM) to connect with MODBUS/TCP supporting control devices via Ethernet network. PUMCE also supports
programless communication with Micrex-SX, which is the PLC produced by Fuji Electric.
Point
•• MODBUS/TCP is a communication protocol that can be used in Ethernet communication.
•• Programless communication is the communication method that enables Micrex-SX to read and write PUM data without
composing communication program.
Using side connectors for the enhanced communication module, PUMCE, or the temperature control module(PUM series) are
connected enables a wiring to only one power terminal and a labor saving wiring.
Confirming Accessories
Before using the product, please confirm that all of following accessories are included.
Description
Quantity
Temperature Controller Enhanced Communication
Module (The equipment)
1 unit
Instruction Manual (Installation)
1 copy
INP-TN5A2052-E
1-3
1.2 Model Code
1.2 Model Code
Ethernet communication module
1
2
3
P
U M
4
5
6
7
8
9
Y
Y 1 - 0
10
C
M
A
B
Contents
Module type
Enhanced communication module
Communication functions
Mitsubishi's PLC programless communications
Instruction manual
Japanese
English
Accessories (Optional)
1
2
3
4
5
6
7
8
P U M Z *
A
A
A
L
1-4
0
0
0
0
2
3
4
1
Contents
DIN rail mounting endplate
Side connecting terminal covers (right & left 1set)
Front face screw terminal cover
Loader connecting cable (RS-232C)
INP-TN5A2052-E
1.3 Part Names and Functions
1.3 Part Names and Functions
External view
Main body
Base part
Ethernet
RJ45 connector
Ethernet RJ45 connector
The RJ45 connector is for connecting the Ethernet cable.
Main Body
It is the main body of a module containing circuits for Ethernet communications.
•• The main body is removable from the base part through one-touch operation.
Base Part
The base part consists of power terminals, module connectors for connecting modules and the structure of fixing a module to
DIN rails.
INP-TN5A2052
1-5
1.3 Part Names and Functions
Front
PUM-C
LOADER
Loader communication port
PWR
BUS
LINK
LED indicator lamps
TX/RX
Ethernet terminal
Ethernet
LED Indicator Lamps
LED lamps indicate the following operational conditions.
Bridge communication
LED
Green
Red
Orange
―
PWR
ON: Normal operation
―
BUS
ON: inter-module communication
(receiving)
―
LINK
ON: normal Ethernet
communication link
―
TX/RX
1-6
―
―
ON: inter-module communication
(transmitting)
―
ON: Ethernet communication data
receiving or transmitting
INP-TN5A2052-E
1.3 Part Names and Functions
Mapping communication
LED
Green
ON: Normal operation
Blinking (0.5-sec. intervals):
Performing initial polling with
PWR
PUM
Red
Blinking (1.0-sec. intervals):
No communication
established due to inter-device
communication fault
Blinking (0.5-sec. intervals):
Registered parameter is out of
range
Switch setting is out of range
EEPROM failure
Invalid MAC address
BUS
ON: inter-module communication
(receiving)
―
LINK
ON: normal Ethernet
communication link
―
TX/RX
―
―
Green
Red
Orange
―
ON: inter-module communication
(transmitting)
―
ON: Ethernet communication data
receiving or transmitting
Programless communication
LED
ON: Normal operation
Blinking (0.5-sec. intervals):
Performing initial polling with
PUM
PWR
ON: faulty communication with
Micrex-SX
Blinking (1.0-sec. intervals):
No communication
established due to inter-device
communication fault
Blinking (0.5-sec. intervals):
Registered parameter is out of
range
Switch setting is out of range
EEPROM failure
Invalid MAC address
BUS
ON: inter-module communication
(receiving)
―
LINK
ON: normal Ethernet
communication link
―
TX/RX
―
―
Orange
―
ON: inter-module communication
(transmitting)
―
ON: Ethernet communication data
receiving or transmitting
Loader communication port
Connecting the equipment to the PC that is installed PUM parameter loader software with a loader connecting cable (optional).
INP-TN5A2052
1-7
1.3 Part Names and Functions
Main part (Back face)
ON
1 2 3 4 5 6
Communication
behavior setting
Communication behavior configuration Switch
Communication behavior is set by DIP switch (SW1 to SW6) on the back face of the module.
Communication behavior
SW setting
1
Modbus/TCP bridge communication
Modbus/TCP mapping communication
Note 2
2(Note 1)
3(Note 1)
OFF
OFF
OFF
ON
ON
OFF
Micrex-SX programless communication
4
5
6
OFF
(Note 1):Turning SW2 and SW3 ON at the same time is not possible.
(Note 2):If turning the SW1 ON, Ethernet setting operates with the factory-set value.
The following table shows the items to be reset to factory default ant their values.
Parameter
Set value
Remarks column
IP address (1)
COA8h
IP address (2)
OO64h
Combining IP address (1) and IP address (2) forms
[192.168.0.100].
Subnet mask (1)
FFFFh
Subnet mask (2)
FFOOh
Default gateway (1)
OOOOh
Default gateway (2)
OOOOh
Combining default gateway (1) and default gateway (2)
forms [255.255.255.0].
Combining IP address (1) and IP address (2) forms
[0.0.0.0].
* If once you reset the IP addresses by turning SW1 ON, they remain factory default value even when you turns SW1 OFF again.
1-8
INP-TN5A2052-E
1.3 Part Names and Functions
Base part
Mounting screw hole
Module connector
Module connector
Power terminal block
Mounting screw hole
Locking tab
Module connector
These connectors are for connecting modules laterally.
Power terminal block
The power terminal block is for connecting the equipment to a module’s power supply.
Connection with the only one module enables all modules to be supplied power via module connectors.
Locking tab
The locking tab is for fastening a module to DIN rails and fastening each module connected laterally when mounting a module to
DIN rail.
INP-TN5A2052
1-9
1 Overview
System Configuration Example for
Modbus/TCP Communication…………… 2-3
2.2
System Configuration Example for
Micrex-SX Programless Communication… 2-5
3 Installation
2.1
2 System Configuration Example
2
System Configuration
Example
4 System Configuration
5 Communications
6 Loader Communications
7 Trouble Shooting
INP-TN5A2052-E
2-1
2.1 System Configuration Example for Modbus/TCP communication
2-2
INP-TN5A2052-E
2.1 System Configuration Example for Modbus/TCP communication
2.1 System Configuration Example
for Modbus/TCP Communication
The figure below shows an example of bridge communication and mapping communication using Modbus/TCP.
•• Bridge communication and mapping communication are methods for connecting PUM and Modbus/TCP supporting PLC or
POD via Ethernet network.
MELSEC-Q series connection example
Connect to a control module (the master of inter-module communications)/
Ethernet communication module
Windows PC
(PUM parameter loader)
Loader connecting cable
(Connect to a master module)
MODBUS/TCPunit
CPU unit
PUM-C
LOADER
PWR
BUS
LINK
TX/RX
MELSEC-Q series
Internal
communication
Ethernet
Ethernet
communication
module
Control module +
Analog I/O module
(Total max.: 16 units)
■
■
■
■
Ethernet
Event I/O module
(Total max.: 16 units)
Max. 8 systems
(Ethernet communication module: Max. 8 units)
PUM-C
LOADER
PWR
BUS
LINK
TX/RX
Internal
communication
Ethernet
Ethernet
communication
module
INP-TN5A2052-E
Control module +
Analog I/O module
(Total max.: 16 units)
Event I/O module
(Total max.: 16 units)
2-3
2.1 System Configuration Example for Modbus/TCP communication
Point
●● Distributed placement of module-type temperature controller system is possible by connecting several Ethernet
communication modules over Local Area Network (LAN).
●● Control or Analog I/O module station number (“1” to “16”)
For proper communication, station number configuration is required. Set the leftmost module to “1” and set the rest of
modules to “2” to “16” consecutively starting from the left. Make sure not to duplicate station numbers in the system.
●● Event I/O module station number (“17” to “32”)
Event I/O module station number always starts from “17” and be set to the rest of unit consecutively form “18” to “32”. Make
sure not to duplicate station numbers in the system.
●● To use a Ethernet communication module, “connection permission of enhanced communication module (PUMC)” parameter
should be set to “1: PUMC connected (RS-485:disable)” with the PUM parameter loader.
Note
●● Do not install any broadcast communication devices such as a PC or a server on the Ethernet environment for PUMCE.
●● Use hubs and LAN cables for industrial use on the Ethernet environment for PUMCE.
●● Only one host device can access to PUMCE.
●● Connection between PUMCE and a host device is released if a preset amount of time has passed without communication.
Reconnect if the connection is dropped.
●● Be sure not to duplicate IP address.
Basic Setting Items
With this configuration, the following settings are required.
•• Ethernet communication setting
•• Device size of setting area/ monitor area (when using mapping communication)
•• Registration of setting area 1 to 712/ monitor area 1 to 712 (when using mapping communication)
2-4
INP-TN5A2052-E
2.2 System Configuration Example for Micrex-SX programless communication
2.2 System Configuration Example for
Micrex-SX Programless Communication
The figure below shows an example of programless communication with Fuji Electric PLC, Micrex-SX.
•• Programless communication is the communication method that enables Micrex-SX to read and write PUM data without
composing communication program.
Micrex-SX series connection example
Connect to a control module (the master of inter-module communications)/
Ethernet communication module
Windows PC
(PUM parameter loader)
Loader connecting cable
(Connect to a master module)
MODBUS/TCP unit
CPU unit
PUM-C
LOADER
PWR
BUS
LINK
TX/RX
Micrex-SXseries
Internal
communication
Ethernet
Ethernet
communication
module
Control module +
Analog I/O module
(Total max.: 16 units)
■
■
■
■
Ethernet
Event I/O module
(Total max.: 16 units)
Max. 8 systems
(Ethernet communication module: Max. 8 units)
PUM-C
LOADER
PWR
BUS
LINK
TX/RX
Internal
communication
Ethernet
Ethernet
communication
module
INP-TN5A2052-E
Control module +
Analog I/O module
(Total max.: 16 units)
Event I/O module
(Total max.: 16 units)
2-5
2.2 System Configuration Example for Micrex-SX programless communication
Point
●● Distributed placement of module-type temperature control system is possible by connecting several Ethernet communication
modules.
●● Control or Analog I/O module station number (“1” to “16”)
For proper communication, station number configuration is required. Set the leftmost module to “1” and set the rest of
modules to “2” to “16” consecutively starting from the left. Make sure not to duplicate station numbers in the system.
●● Event I/O module station number (“17” to “32”)
Event I/O module station number always starts from “17” and be set to the rest of unit consecutively form “18” to “32”. Make
sure not to duplicate station numbers in the system.
●● To use an Ethernet communication module, “connection permission of enhanced communication module (PUMC)”
parameter should be set to “1: PUMC connected (RS-485:disable)” with the PUM parameter loader.
Note
●● Do not install any broadcast communication devices such as a PC or a server on the Ethernet environment for PUMCE.
●● Use hubs and LAN cables for industrial use on the Ethernet environment for PUMCE.
●● Only one host device can access to PUMCE.
●● Connection between PUMCE and a host device is released if a preset amount of time has passed without communication.
Reconnect if the connection is dropped.
●● Be sure not to duplicate IP address.
Basic Setting Items
With this configuration, the following settings are required.
•• Ethernet communication setting
•• SX communication setting
•• SX device setting
•• Registration of setting area 1 to 712/ monitor area 1 to 712
2-6
INP-TN5A2052-E
1 Overview
2 System Configuration Example
3
Installation
3.2
Dimensions…………………………………… 3-4
3.3
Mounting Modules…………………………… 3-5
3.4
Attaching Accessories (Optional)………… 3-9
3.5
Mounting with Screws……………………… 3-10
3.6
Connection… ………………………………… 3-11
4 System Configuration
Installation Procedure… …………………… 3-3
3 Installation
3.1
5 Communications
6 Loader Communications
7 Trouble Shooting
INP-TN5A2052-E
3-1
3.1 Installation Procedure
3-2
INP-TN5A2052-E
3.1 Installation Procedure
3.1 Installation Procedure
Installation procedure
The flowchart below shows the setting procedure for startup.
Ethernet environment configuration
Hardware configuration of PUMCE
• Configure the communication method
using DIP switch
Parameter setting of PUMCE
Setting for lower modules
• Communication condition
• Station numbers
Test operation
INP-TN5A2052-E
3-3
3.2 Dimensions
3.2 Dimensions
External dimension
Provide enough clearance space for installation referring to the diagram below.
Base part
(When detached from the main unit)
30
85
Mounting screw hole
PUM-C
LOADER
PWR
BUS
50
LINK
TX/RX
6
100
1.5
DIN rail
Terminal screw
(M3)
(30)
When mounting/
dismounting to DIN rail
(8)
5
Ethernet
Mounting screw hole
Main body
( When detached
from the base part)
Locking tab
Cautions when installing
In order to heat dissipation, provide clearance space of more than 30mm (50mm is recommended) above and under the
30 or more
30 or more
equipment.
Point
Clearance space more than 30mm above and under a module should be provided when mounting/dismounting it to/from DIN rails.
3-4
INP-TN5A2052-E
3.3 Mounting Modules
3.3 Mounting Modules
How to attach/detach the base part from the main unit
Each module of Module Type Temperature Controller, PUM series, has the configuration that the base part is detachable through
one-touch operation for easy installation and maintenance.
How to detach the bas part
1. Press the lock lever on the top of the main unit.
2. Pull down the mainunit.
3. Detach the cutout at the lower end of the main unit block from the projection on the base unit.
Lock lever
Main unit
Projection
INP-TN5A2052-E
3-5
3.3 Mounting Modules
Mounting to DIN rails
Mounting modules
1. Pull down the locking tab of the base part. Hook the back
part of the module onto the upper part of the DIN rails.
2. Push the module towards the direction of the arrow 2.
Hook
DIN rail
Locking tab
3. Pull up the locking tab of the base part to fasten the
module onto the DIN rails.
Point
When connecting the module after mounting it to the DIN rail,
pull the locking tab up after connecting modules each other.
3-6
INP-TN5A2052-E
3.3 Mounting Modules
Connecting modules
PUM-C
LOADER
PWR
PUM-A
COM
LOADER
OUT1
OUT4
STATION
F012
OUT3
LINK
TX/RX
345
7 8 9A
BUS
6
each other.
OUT2
E
2. Connect modules by connecting module connectors with
PWR
BCD
1. Check the locking tab is pulled down.
Module
connector
Ethernet
Locking tab
PUM-A
COM
LOADER
PWR
PUM-A
COM
LOADER
OUT2
OUT2
BUS
OUT3
LINK
OUT4
345
E
7 8 9A
F012
STATION
6
TX/RX
OUT3
OUT4
STATION
345
7 8 9A
PWR
6
OUT1
BCD
tabs up.
PWR
OUT1
F012
LOADER
E
PUM-C
BCD
3. After mounting modules to the DIN rails, pull the all locking
4. The power supplies are connected each other inside
connected modules.
Ethernet
INP-TN5A2052-E
3-7
3.3 Mounting Modules
Order of modules
Connecting a multi-loop module type temperature controller, PUM series, is shown as below.
Ethernet communication module
Control module + Analog I/O module
PWR
PUM-A
PWR
COM
LOADER
COM
OUT1
TX/RX
345
E
F012
STATION
BCD
OUT4
PUM-E
LOADER
STATION
345
7 8 9A
OUT3
LINK
Do1
Do2
Do3
Do4
Do5
Do6
Do7
Do8
6
BUS
7 8 9A
OUT2
6
PWR
Di1
Di2
Di3
Di4
Di5
Di6
Di7
Di8
F012
LOADER
E
PUM-C
Slave
BCD
Control module
(Master)
Event I/O module
Ethernet
“128”(fixed)
“1”(Master)
“2”
・
・
・
・
・
・
・
“16”(Max.)
“17”
“18”
・
・
・
・
・
・
・
“32”(Max.)
Station No.
Point
A Ethernet communication module is always placed on the extreme left.
●● An Ethernet communication module should be on the left of the master control module: it is always placed on the left.
Modules are basically placed in the order of station numbers starting from the left.
3-8
INP-TN5A2052-E
3.4 Attaching accessories (optional)
3.4 Attaching Accessories (Optional)
Attaching side connecting terminal covers
Side connectors on both ends of connected modules are
PWR
LOADER
COM
345
Di1
Di2
Di3
Di4
Di5
Di6
Di7
Di8
Do1
Do2
Do3
Do4
Do5
Do6
Do7
Do8
PUM-E
LOADER
STATION
F012
PUM-E
STATION
345
7 8 9A
Do1
Do2
Do3
Do4
Do5
Do6
Do7
Do8
6
Di1
Di2
Di3
Di4
Di5
Di6
Di7
Di8
E
COM
345
7 8 9A
F012
PWR
LOADER
6
E
PUM-E
STATION
7 8 9A
Do1
Do2
Do3
Do4
Do5
Do6
Do7
Do8
6
BCD
TX/RX
7 8 9A
OUT4
6
recommended.
OUT3
LINK
Di1
Di2
Di3
Di4
Di5
Di6
Di7
Di8
F012
COM
345
E
PWR
LOADER
STATION
F012
PUM-A
COM
OUT2
BUS
E
PWR
OUT1
PWR
BCD
LOADER
BCD
PUM-C
attaching side connecting terminal covers (PUMZ * A03) is
BCD
exposed. To prevent accidents and protect connectors,
Ethernet
Side connecting terminal cover
(right & left 1 set)
Attaching endplates
In order to fix the equipment to a DIN rail more tightly,
Do1
Do2
Do3
Do4
Do5
Do6
Do7
Do8
PUM-E
PWR
LOADER
COM
STATION
2
3456
Di1
Di2
Di3
Di4
Di5
Di6
Di7
Di8
Do1
Do2
Do3
Do4
Do5
Do6
Do7
Do8
PUM-E
LOADER
DIN rail mounting
endplate
STATION
2
3456
F01
Di1
Di2
Di3
Di4
Di5
Di6
Di7
Di8
F01
COM
3456
F01
F012
PWR
LOADER
2
BCDE
E
PUM-E
STATION
A
BCD
OUT4
Do1
Do2
Do3
Do4
Do5
Do6
Do7
Do8
789
LINK
Di1
Di2
Di3
Di4
Di5
Di6
Di7
Di8
789
INP-TN5A2052-E
COM
345
789
connecting terminal covers prior to them.
PWR
LOADER
STATION
7 8 9A
OUT3
6
When attaching endplates, make sure to attach side
PUM-A
COM
OUT2
BUS
TX/RX
Note
PWR
OUT1
PWR
BCDE
LOADER
A
PUM-C
BCDE
DIN rail mounting
endplate
A
optional endplates (PUMZ * A02) can be used.
Ethernet
Side connecting terminal cover
(right & left 1 set)
3-9
3.5 Mounting with screws
3.5 Mounting with Screws
When mounting modules with screws on the wall, check for the base parts of it beforehand.
Point
Mounting screws are not included the product. If necessary, prepare two screws (M3) per unit.
1. Refer to the right figure for mounting screw hole size and
the pitch, to decide the mounting position.
(30)
9±0.2
(3)
(100)
88.5 ±0.2
2-M3
+0.7
30 +0.2
Unit [mm]
2. Remove the module main unit from the base part.
[3.3Mounting modules]
3-5
3. Connect the base parts and push the all locking tabs up
to fix.
4. Fixate the base parts onto the mounting position with
screws.
5. Fixate the base parts onto the mounting position with
screws.
3-10
INP-TN5A2052-E
3.6 Connection
3.6 Connection
Ethernet connection
Connect a multi-loop module-type temperature controller PUM series to a control device via an Ethernet communication module.
MELSEC-Q series connection example
MELSEC-Q
Modbus/TCP
LAN connection
PUM-C
LOADER
PWR
BUS
LINK
TX/RX
Ethernet
PUMCE PUMA
MICREX-SX series connection example
Micrex-SX
ET1/ET2
LAN connection
PUM-C
LOADER
PWR
BUS
LINK
TX/RX
Ethernet
PUMCM PUMA
Warning
Connect/separate PUM series, Temperature control system to/from PLC after turning OFF the power of the equipment or
peripheral equipments to prevent electric shock and equipment failure.
INP-TN5A2052-E
3-11
3.6 Connection
Note
Use hubs and LAN cables for industrial use. Using hubs and LAN cables for data communication may impede communication.
Operability confirmed:
HUB: SIEMENS SCALANCE X208
LAN cable: Category 6, metal-shielded industrial LAN cables
Note
LAN cables and hubs are to be supplied by our customers.
Terminal
PUM-C
LOADER
PWR
BUS
LINK
TX/RX
Ethernet
RJ-45 connector
Ethernet
Point
The insulation between terminals is as follows.
Power supply
Loader communication
Functional insulation (AC1000V)
3-12
Ethernet communication
Functional insulation (AC500V)
INP-TN5A2052-E
3.6 Connection
Connecting modules
Connectable modules to the equipment are as follows.
•• PUMA/B (Control module), PUMV/N/T (Analog I/O module), PUME (Event I/O module)
Point
●● Max. 32 units are connectable to the equipment. The number of connectable modules varies according to module types.
Refer to user’s manual for each module for details.
●● When connected modules, power supplies are connected to other modules by connecting power supply lines to the one of
the modules.
Wiring for power supply
Terminal layout
Power terminals are on the base part of each module.
Wiring is same for the all modules.
The power supplies to all connected modules by connecting this terminal to the only one of them.
Power terminal
DC 24V (-)
DC 24V (+)
Note: Power cable more than one should not be connected to power terminals.
Note
●● Wiring to a terminal block, use crimp terminal (screw size: M3).
Use the screws in this product only.
Screw size on the terminal block: M3×7 (with square washer)
Clamp torque:
0.78N-m (8kgf-cm)
●● Apply power cable with allowable current capacity larger than total consumption current of all connected modules.
●● Power cable more than one should not be connected to power terminals.
INP-TN5A2052-E
3-13
3.6 Connection
●● When using AWG 16 cable, you should use the crimp terminal that material thickness is 0.9mm or less.
●● Use the power cables and crimp terminals indicated below for wiring.
Power cable size
Cable type
Size
0.25 – 1.25mm2 (AWG22 to 16)
Power cable, output, others
Crimp terminal size
Cable size
Clamp torque
φ3.2mm
Round-shaped crimp terminal
3-14
3.2mm
0.8Nm
6.0mm or less
6.0mm or less
0.25 – 1.25mm2 (AWG22 to 16)
* Material thickness
0.9mm or less
Y-shaped crimp terminal
INP-TN5A2052-E
1 Overview
2 System Configuration Example
4
System Configuration
Ethernet… …………………………………… 4-3
4.2
Bridge Communication… ………………… 4-6
4.3
Mapping Communication… ……………… 4-9
4.4
Micrex-SX Programless Communication…4-14
3 Installation
4.1
4 System Configuration
5 Communications
6 Loader Communications
7 Trouble Shooting
INP-TN5A2052-E
4-1
4.1 Ethernet
4-2
INP-TN5A2052-E
4.1 Ethernet
4.1 Ethernet
Explanation here is for establishing a LAN environment for the Ethernet communication module.
Ethernet setting
Refer to the parameters below.
Parameter
Setting range
Unit
Factory-set
value
Attribute MODBUS Register No.
(Relative address)
IP address (1)
0000h to FFFFh
None
C0A8h
R/W
40404(0193h)
IP address (2)
0000h to FFFFh
None
0064h
R/W
40405(0194h)
Subnet mask (1)
0000h to FFFFh
None
FFFFh
R/W
40406(0195h)
Subnet mask (2)
0000h to FFFFh
None
FF00h
R/W
40407(0196h)
Default gateway (1)
0000h to FFFFh
None
0000h
R/W
40408(0197h)
Default gateway (2)
0000h to FFFFh
None
0000h
R/W
40409(0198h)
Point
It is recommended to perform Ethernet setting before connecting the Ethernet communication module to a LAN environment.
Note
Be sure to restart PUMCE after changing Ethernet setting.
IP address setting
Configure the IP addresses for the Ethernet communication module.
Refer to the parameters below.
Parameter
Setting range
Unit
Factory-set
value
Attribute MODBUS Register No.
(Relative address)
IP address (1)
0000h to FFFFh
None
C0A8h
R/W
40404(0193h)
IP address (2)
0000h to FFFFh
None
0064h
R/W
40405(0194h)
IP address (1) indicates upper two addresses while IP address (2) indicate lower two addresses.
IP address (1) and IP address (2) are combined as one IP address.
INP-TN5A2052-E
4-3
4.1 Ethernet
The initial values are as follows:
Parameter
IP address (1)
IP address (2)
High byte
Low byte
High byte
Low byte
Set value (hexadecimal)
C0h
A8h
00h
64h
Actual address (decimal)
192
168
0
100
Actual IP address is [192.168.0.100].
IP address setting example
Assume that you want to change IP address to [10.22.74.12].
Parameter
IP address (1)
IP address (2)
High byte
Low byte
High byte
Low byte
Desired address (decimal)
10
22
74
12
Set value (decimal)
0Ah
16h
4Ah
0Ch
From the table above, the setting should be as follows: IP address (1): 0A16h, IP address (2): 4A0Ch.
Note
●● Do not duplicate an IP address already in use for other device.
●● Automatic IP address allocation using router etc. is not supported. Be sure to assign IP address manually.
●● If using a router, make sure not to assign automatically the same IP address as PUMCE to other device.
●● Do not set low byte of IP address (2) to FFh (255).
●● Consult your network administrator for available IP addresses.
●● IPv6 is not supported.
4-4
INP-TN5A2052-E
4.1 Ethernet
Subnet mask setting
Setup subnet masks for the Ethernet communication module.
Refer to the parameters below.
Parameter
Setting range
Unit
Factory-set
value
Attribute
MODBUS Register No.
(Relative address)
Subnet mask (1)
0000h to FFFFh
None
FFFFh
R/W
40406(0195h)
Subnet mask (2)
0000h to FFFFh
None
FF00h
R/W
40407(0196h)
Subnet mask (1) indicates upper two addresses while subnet mask (2) indicates lower two addresses. Subnet mask (1) and
subnet mask (2) are combined as one subnet mask.
Refer to the IP address setting example for setting procedure.
Point
●● A subnet mask is a numerical value to discriminate between network address and host address among IP addresses. Usually,
they do not need to be changed.
Note
●● Consult your network administrator before changing subnet mask setting.
Default gateway setting
Configure default gateways for the Ethernet communication module.
Refer to the parameters below.
Parameter
Factory-set
value
Attribute
MODBUS Register No.
(Relative address)
Setting range
Unit
Default gateway (1)
0000h to FFFFh
None
0000h
R/W
40408(0197h)
Default gateway (2)
0000h to FFFFh
None
0000h
R/W
40409(0198h)
Default gateway (1) indicate upper two addresses while default gateway (2) indicates lower two addresses. Default gateway (1)
and default gateway (2) are combined as one default gateway.
Refer to the IP address setting example for setting procedure.
Point
●● A default gateway is the device that passes traffic from the local network to devices on other network. Generally, IP address of
the router is the value for default gateway. Setup of default gateway is necessary when accessing other network beyond the
router.
●● PUMCE is capable of relaying 8 routers maximum.
INP-TN5A2052-E
4-5
4.2 Bridge Communication
4.2 Bridge Communication
In bridge communication, PUMCE bridges Modbus/TCP and Modbus/RTU.
PUMCE convert Modbus/TCP messages from a host device to Modbus/RTU and transmit them to PUMA/B, PUMV/N/T, and/
or PUME. Response massages from PUMA/B, PUMV/N/T, and/or PUME are converted to Modbus/TCP to transmit to the host
device. This function allows the host device to access most of the parameters of PUM series connected to PUMCE.
The figure below shows an overview of bridge communication.
Operation of bridge communication
PLC or POD
Local area network
Modbus/TCP
Ethernet
communication
module
PUM St 1
PUM St 32
Protocol
4-6
INP-TN5A2052-E
4.2 Bridge Communication
PUMCE setting
All the DIP switches on the back face should set to OFF. No other setting is required.
Note
●● Be sure to turn OFF the main unit before turning ON/OFF the DIP switches to change the communication method.
●● Note that all the Ethernet settings will be initialized if you set DIP switch 1 to ON.
●● Refer to Chapter # about Modbus/TCP message.
●● PUMCE parameters cannot be read or written through Modbus/TCP communication in Bridge communication.
INP-TN5A2052-E
4-7
4.2 Bridge Communication
Operation of bridge communication
PUMCE converts the communication data of Modbus/TCP transmitted by a host device (PLC, POD, etc.) into Modbus/RTU and
transmit it to PUM of the specified station. PUM receives Modbus/RTU data and reply PUMCE after executing the command.
PUMCE converts Modbus/RTU data send back from PUM into Modbus/TCP and transmit to the host device.
The figure below shows the overview of Bridge communication.
Operation of bridge communication
PLC or POD
PUMCE
Modbus/TCP
PUMA, etc.
Protocol conversion
Modbus/RTU
Modbus/RTU
Protocol conversion
Modbus/TCP
Note
●● Be sure to specify station numbers when using Modbus/TCP communication, since Modbus communication of PUM does
not support broadcast communication.communication.
4-8
INP-TN5A2052-E
4.3 Mapping Communication
4.3 Mapping Communication
The mapping communication allows PUMCE to periodically read and write preset parameters of other PUM series connected
to PUMCE. Through communication with PUMCE, a host device can read and write parameters of PUMA/B, PUMV/N/T, and/or
PUME connected to PUMCE.
The figure below shows an overview of mapping communication.
Operation of mapping communication
PLC or POD
Local area network
Modbus/TCP
Ethernet
communication
module
PUM St 1
PUM St 32
Periodical data reading/writing
Internal
memory
PUMCE setting
Set the DIP switch 3 on back face to ON, and the others to OFF.
Note
●● Be sure to turn PUMCE OFF before turning ON/OFF the DIP switches to change the communication method.
●● Note that all the Ethernet settings will be initialized if you set the DIP switch 1 to ON.
●● Refer to Chapter # regarding Modbus/TCP message.
INP-TN5A2052-E
4-9
4.3 Mapping Communication
Parameter setting
Register parameters for the mapping communication.
Refer to the parameters below.
Parameter
Setting range
Unit
0: unused
1 to 16: Control/analog module
17 to 32: Event module
128: Ethernet communication
module
None
0
R/W
None
0
R/W
None
0
R/W
Setting area entry register No.
0, 40000 to 49999*
the 1st to 712th word
None
0
R/W
Monitor area
device size
0 to 712
None
0
R/W
41067(042Ah)
Setting area
device size
0 to 712
None
0
R/W
41063(0426h)
Monitor area entry St. No.
1st to 712th word
Monitor area entry register No.
0, 30000 to 49999*
the 1st to 712th word
Setting area entry St. No.
1st to 712th word
0: unused
1 to 16: Control/analog module
17 to 32: Event module
Factory-set Attribute MODBUS Register No.
value
(Relative address)
43001(0BB8h) to
44424(1147h)
41201(04B0h) to
42624(0A3Fh)
Monitor area parameter entry
Configure parameters to readout data. The station number and Modbus register number of PUM that reads data are to be
configured.
Refer to the parameters below.
Parameter
Monitor area entry St. No.
the 1st word
Setting range
Unit
0: unused
1 to 16: Control/analog module
17 to 32: Event module
128: Ethernet communication
module
None
0
R/W
43001(0BB8h)
None
0
R/W
43002(0BB9h)
None
0
R/W
44423(1146h)
None
0
R/W
44424(1147h)
Monitor area entry register No.
0, 30000 to 49999*
the 1st word
Factory-set Attribute MODBUS Register No.
value
(Relative address)
Monitor area entry St. No.
the 712th word
0: unused
1 to 16: Control/analog module
17 to 32: Event module
Monitor area entry register No.
0, 40000 to 49999*
the 712th word
* You can setup only the addresses written in "Setting/Monitor area register number" (control module, event module, analog
module). However, the parameters marked “*” in the“Entry ban” column cannot be set. Register the readout parameters.
4-10
INP-TN5A2052-E
4.3 Mapping Communication
Read out set values from the temperature control module
Read out the temperature control module’s set values entered onto the setting area to the Setting area data fild or the monitor
area data field.
•• Monitor parameters registration example
Assume that you want to register PV of Ch.1 to Ch.4 for PUMA of the station number 1.
Parameter
Set value
Monitor area entry St. No. the 1st word
1
Monitor area entry register No. the 1st word
31001
Monitor area entry St. No. the 2nd word
1
Monitor area entry register No. the 2nd word
32001
Monitor area entry St. No. the 3rd word
1
Monitor area entry register No. the 4th word
33001
Monitor area entry St. No. the 4th word
1
Monitor area entry register No. the 4th word
34001
Note
●● Be sure to register the 1st word when using mapping communication.
●● Number of registerable parameters per reference station is limited. Also, please note that maximum number of registerable
parameters is depends on each module shown below.
Module type
Maximum No.
PUMA/B, PUMV/N/T, PUMCE
32 words
PUME
8 words
If you register parameters more than the maximum number, the PWR indicator will blink red, and then comes to be in the
communication fault status.
INP-TN5A2052-E
4-11
4.3 Mapping Communication
Setting area parameter entry
Configure data-writing parameters. The station number and Modbus register number of the data-writing module are to be
configured.
Refer to the parameters below.
Parameter
Setting area entry St. No.
the 1st word
Factory-set
MODBUS Register No.
Attribute
value
(Relative address)
Setting range
Unit
00: unused
1 to 16: Control/analog module
17 to 32: Event module
None
0
R/W
41201(04B0h)
None
0
R/W
41202(04B1h)
None
0
R/W
42623(0A3Eh)
None
0
R/W
42624(0A3Fh)
Setting area entry register No.
0, 40000 to 49999*
the 1st word
Setting area entry St. No.
the 712th word
0: unused
1 to 16: Control/analog module
17 to 32: Event module
Setting area entry register No. 0, 40000 to 49999*
* You can setup only the addresses written in "Setting/Monitor area register number" (control module, event module, analog
module). However, the parameters marked “*” in the“Entry ban” column cannot be set. Register the readout parameters.
•• Monitor parameters registration example
Assume that you want to register SV of Ch.1 to Ch.4 for PUMA of the station number 1.
Parameter
Set value
Setting area entry St. No. the 1st word
1
Setting area entry register No. the 1st word
40023
Setting area entry St. No. the 2nd word
1
Setting area entry register No. the 2nd word
40024
Setting area entry St. No. the 3rd word
1
Setting area entry register No. the 3rd word
40025
Setting area entry St. No. the 4th word
1
Setting area entry register No. the 4th word
40026
Note
●● Be sure to register the 1st word when using mapping communication.
●● Note that the numbers of parameters registrable for each station are limited depends on the type of module as follows.
Module type
Maximum No.
PUMA/B, PUMV/N/T
32 words
PUME
8 words
If you register parameters more than the maximum number, the PWR indicator will blink red, and then comes to be in the
communication fault status.
●● Parameters of Ethernet communication module cannot be registered in setting area.
4-12
INP-TN5A2052-E
4.3 Mapping Communication
Device size
Setup the device size of the parameter that performs mapping communication.
Refer to the parameters below.
Parameter
Factory-set
value
Attribute
MODBUS Register No.
(Relative address)
Setting range
Unit
Monitor area device size
0 to 712
None
0
R/W
41067(042Ah)
Setting area device size
0 to 712
None
0
R/W
41063(0426h)
Specify the number of parameters, i.e. the number of the last words, registered in monitor area and setting area.
Note
●● Be sure to set the value of 1 or above for device size of both monitor area and setting area when using mapping
communication.
●● If any skipped number exists in registration of monitor area or setting area, set the number of the last words you registered,
instead of the number of the words for mapping communication.
Operation of mapping communication
In mapping communication, PUMCE and other PUM series periodically read and write the values of specified parameters, and
store them in PUMCE memory. A host device can read/write specified parameters by accessing PUMCE memory.
The figure below shows an overview of mapping communication.
Operation of mapping communication
PLC or POD
PUMCE
Modbus/TCP
Internal
memory
PUMA, etc.
Periodical
communication
Note
●● The only station number available in mapping communication is 128 (80h). Note that no response can be made to other
station number than above.
INP-TN5A2052-E
4-13
4.4 Micrex-SX Programless Communication
4.4 Micrex-SX Programless Communication
Micrex-SX programless communication is the function that enables Micrex-SX, PLC produced by Fuji Electric, to establish
communication without programming.
PUMCE setting
Set the DIP switch 2 on back face to ON, and the others to OFF.
Note
Programless communication is active regardless of ON/OFF of the DIP switch 1 on back face.
●● Even if you perform mapping communication setting, programless communication remains active as long as the DIP switch
2 on back face is set to ON.
●● Be sure to turn PUMCE OFF before turning ON/OFF the DIP switches to change the communication method.
Programless communication is available only with Fuji Electric PLC, Micrex-SX.
SX communication setting
Configure the parameters that communicate with Micrex-SX.
Refer to the parameters below.
Parameter
setting range
Unit
Factory-set
value
Attribute
MODBUS Register No.
(Relative address)
SX communication inter-cycle time 0 to 5000
msec
100
R/W
41050(0419h)
SX communication starting time
1 to 255
sec
5
R/W
41051(041Ah)
SX response monitoring time
10 to 100000
msec
200
R/W
41052(041Bh)
Consecutive communication error
count
10
times
10
R/W
41053(041Ch)
Target SX IP address (Upper)
0000 to FFFFh
None
C0A8h
R/W
41054(041Dh)
Target SX IP address (Lower)
0000 to FFFFh
None
0001h
R/W
41055(041Eh)
Connection method
0: Direct connection
with loader
1: SX-bus connection
None
0: Direct
connection
with loader
R/W
41056(041Fh)
SX connection ID (L)
00h to FEh
None
00h
R/W
41057(0420h)
SX connection ID (H)
00h to 0Fh
None
00h
R/W
41058(0421h)
Operation at programless
communication fault
0: RUN
1: STOP
None
1: STOP
R/W
41059(0422h)
Note
●● SX communication starting time is the time when the communication with Micrex-SX starts after you turn on PUMCE.
4-14
INP-TN5A2052-E
4.4 Micrex-SXMicrex-SX Programless Communication
SX communication inter-cycle
Set the communication inter-cycle between the Ethernet communication module and Micrex-SX. This setting determines the
memory update cycle of Micrex-SX.
Refer to the parameters below.
Parameter
Setting range
SX communication inter-cycle time 0 to 5000
Unit
msec
Factory-set
value
100
Attribute
R/W
MODBUS Register No.
(Relative address)
41050(0419h)
Note
●● If you set the inter-cycle time shorter than necessary for one communication, communication cannot be performed at desired
interval. In that case, communication shall be performed at minimum interval.
●● Set the value with enough margins since the time required for one communication varies with communication load on an
Ethernet network.
SX communication starting time
Set the time that the Ethernet communication module and Micrex-SX start programless communication. This setting is necessary
when matching the operation starting time with other devices.
Refer to the parameters below.
Parameter
SX communication starting time
Setting range
Unit
1 to 255
sec
Factory-set
value
5
Attribute
R/W
MODBUS Register No.
(Relative address)
41051(041Ah)
Note
●● If you set the starting time less than the time necessary for Ethernet communication module to be ready for operation,
communication does not start until Ethernet communication module is ready.
●● Set a value in accordance with the situation, for the startup time of Ethernet communication module varies with registration
status of monitor area and setting area.
SX response monitoring time
Set the time to monitor communication between Ethernet communication module and Micrex-SX. Modify the monitoring time in
accordance with data volume to be transferred. This parameter can be set in 10msec.
Refer to the parameters below.
Parameter
SX communication starting time
Setting range
Unit
10 to 10000
msec
Factory-set
value
200
Attribute
R/W
MODBUS Register No.
(Relative address)
41052(041Bh)
Note
●● Although you can set shorter SX communication inter-cycle time by setting SX response monitoring time shorter, note that
communication cannot be established if you set them too short.
INP-TN5A2052-E
4-15
4.4 Micrex-SX Programless Communication
Consecutive communication error count
Set Consecutive communication error count when an error occurs in programless communication between the Ethernet
communication module and Micrex-SX.
Refer to the parameters below.
Parameter
Consecutive communication error
count
Setting range
Unit
0 to 10
times
Factory-set
value
10
Attribute
R/W
MODBUS Register No.
(Relative address)
41053(041Ch)
Note
●● When no response is made by Micrex-SX even if PUMCE has tried to communicate with it as many times as set in the
"Consecutive communication error count", PUMCE treats it as a communication fault and performs the operation configured
in "Operation at programless communication fault" parameter.
Target SX IP address
Set the IP address of Micrex-SX to which the Ethernet communication module accesses.
Refer to the parameters below.
Parameter
Setting range
Unit
Factory-set
value
Attribute
MODBUS Register No.
(Relative address)
Target SX IP address (Upper)
0000 to FFFFh
None
C0A8h
R/W
41054(041Dh)
Target SX IP address (Lower)
0000 to FFFFh
None
0001h
R/W
41055(041Eh)
Initial values are as follows:
Target SX IP address (1)
Target SX IP address (2)
High byte
Low byte
High byte
Low byte
Set value (hexadecimal)
C0h
A8h
00h
01h
Actual address (decimal)
192
168
0
1
Parameter
Actual IP address is [192.168.0.1].
Refer to "IP address setting" in “4.1 Ethernet setting” for detailed setting procedure.
Note
●● IP address of the target SX should be same as that of Micrex-SX to perform programless communication.
4-16
INP-TN5A2052-E
4.4 Micrex-SXMicrex-SX Programless Communication
Connection method and SX connection ID
Configure the interface and CPU ID for connection between the Ethernet communication module and Micrex-SX.
Refer to the parameters below.
Parameter
Factory-set
value
Attribute
MODBUS Register No.
(Relative address)
Setting range
Unit
Connection method
0: single CPU
1: multi CPU
None
0
R/W
41053(041Fh)
SX connection ID
00h to FEh
None
0
R/W
41057(0420h)
SX communication ID
Single-CPU configuration
00h
Multi-CPU configuration
CPU ID=0
FEh
CPU ID=1
FDh
CPU ID=7
F7h
Note
●● Refer to the Micrex-SX user's manual about ID setting on Micrex-SX side.
Operation setting when a programless communication fault occurs
Set the operation when communication between Ethernet communication module and Micrex-SX is failed and then restored.
Refer to the parameters below.
Parameter
Operation at programless
communication fault
Setting range
Unit
0: RUN
1: STOP
None
Factory-set
value
1
Attribute
R/W
MODBUS Register No.
(Relative address)
41059(0422h)
0:RUN
Programless communication will be automatically resumed when Ethernet communication is restored.
1:STOP (initial setting)
Programless communication is not resumed unless the designated procedures are not performed, even if Ethernet
communication is restored.
Refer to "Communication restoration demand (Command: FFFFh)" about the procedure to resume programless
communication.
INP-TN5A2052-E
4-17
4.4 Micrex-SX Programless Communication
SX device setting
Configure the device to be used with Micrex-SX.
Refer to the parameters below.
Parameter
Factory-set
value
Unit
2: Standard memory
4: Retain memory
None
2
R/W
41060(0423h)
Setting area start address (Lower) 0 to 65535
None
1000
R/W
41061(041Ah)
Setting area start address (Upper) 0 to 65535
None
0
R/W
41062(041Bh)
Setting area device size
0 to 712
None
0
R/W
41063(041Ch)
Monitor area device type
2: Standard memory
4: Retain memory
None
2
R/W
41064(041Dh)
Monitor area start address (Lower) 0 to 65535
None
0
R/W
41065(041Eh)
Monitor area start address (Upper) 0 to 65535
None
0
R/W
41066(041Fh)
Monitor area device size
None
0
R/W
41067(042Ah)
Setting area device type
0 to 712
Attribute
MODBUS Register No.
(Relative address)
Setting range
The following figure shows how the memory address of MICREX-SX matches the start address of setting/monitor area.
High order
Setting/monitor area start address
Low order
00*
Micrex-SX memory address
↑
↑
↑
H
M
L
* 00h fixed
Device type
Set the memory type of Micrex-SX that read/write from Ethernet communication module.
Refer to the parameters below.
Parameter
Factory-set
value
Attribute
MODBUS Register No.
(Relative address)
Setting range
Unit
Setting area device type
2: Standard memory
4: Retain memory
None
2
R/W
41060(0423h)
Monitor area device type
2: Standard memory
4: Retain memory
None
2
R/W
41064(041Dh)
2:Standard memory
A standard memory that is deleted when Micrex-SX is turned OFF.
4:Retain memory
A memory that is retained even after Micrex-SX is turned OFF. Note that the lifetime of Micrex-SX memory may be
affected by frequent data rewriting.
Note
●● Do not set the device type to other than 2 or 4.
●● Refer to the Micrex-SX user's manual about memory area reservation on Micrex-SX side.
●● Declare the data type as INT when reserving memory area on Micrex-SX.
4-18
INP-TN5A2052-E
4.4 Micrex-SXMicrex-SX Programless Communication
Setting/Monitor area start address
Specify the memory address of Micrex-SX in which parameters are to be read/written.
Refer to the parameters below.
Parameter
Setting range
Unit
Factory-set
value
Attribute
MODBUS Register No.
(Relative address)
Setting area start address (Lower) 0 to 65535
None
1000
R/W
41061(041Ah)
Setting area start address (Upper) 0 to 65535
None
0
R/W
41062(041Bh)
Monitor area start address (Lower) 0 to 65535
None
0
R/W
41065(041Eh)
Monitor area start address (Upper) 0 to 65535
None
0
R/W
41066(041Fh)
Memory of setting area
Setting area Field
Defined by “Setting area
device type” and “Setting area
start address”.
%WM1.100
Reading
demand flag
%WM1.100
%WM1.100
System field
(Each 1 word)
%WM1.100
Parameter setting
demand flag
Command setting
demand flag
System area 1
(Reserved)
%WM1.100
Data field
Depends on setting
parameter entry
(0 to 712)
Defined by “Setting
area device size”.
%WM1.171
Memory of monitor area
Monitor area Field
Defined by “Monitor area device
type” and “Monitor area start
address”.
%WM1.000
Reading response
flag
%WM1.000
%WM1.000
System field
(Each 1 word)
%WM1.000
Parameter setting
response flag
Command setting
response flag
System area 1
(Reserved)
%WM1.000
Data field
Depends on monitor
parameter entry
(0 to 712)
Defined by “Monitor area
device size”.
%WM1.071
INP-TN5A2052-E
4-19
4.4 Micrex-SX Programless Communication
Note
●● Set the address of setting area and that of monitor area such that they do not overlap.
●● The rewrite of the data in menory area of setting area/monitor area is performed by the Ethernet communication module. Do
not rewrite it on PLC.
●● Refer to the Micrex-SX user's manual about memory area reservation on Micrex-SX side.
Device size of setting/monitor area
Configure the memory size that each of the setting area and the monitor area uses.
The Ethernet communication module rewrites and read the memory in Micrex-SX according to the specified device size.
Refer to the parameters below.
Parameter
Setting range
Unit
Factory-set
value
Attribute
MODBUS Register No.
(Relative address)
Setting area device size
0 to 712
None
0
R/W
41063(041Ch)
Monitor area device size
0 to 712
None
0
R/W
41067(042Ah)
Note
●● Set the value of 1 or above for both setting area and monitor area.
●● Refer to the Micrex-SX user's manual about memory area reservation on Micrex-SX side.
Setting/Monitor area entry
Register parameters to be read and written in programless communication.
Regarding the registration procedure, refer to "Monitor area parameter entry"
4-20
4-12
in “4.3 Mapping communication.”
4-10
and "Setting area parameter entry"
INP-TN5A2052-E
4.4 Micrex-SXMicrex-SX Programless Communication
Operation of programless communication
In programless communication, the Ethernet communication module functions as a master of communication, and reads and
writes Micrex-SX memory. Micrex-SX can read and write parameters by accessing the memory that has been read and written
by the Ethernet communication module.
The figure below shows how parameters are read and written in programless communication.
PLC
Micrex-SX
Device memory
System field
Data field
Reading set/monitor value
Reading set value
Writing set value
Data field
Command response
Monitor area
System field
Command demand
Setting area
Ethernet
communication
module
Setting area
Temperature
control module
St.1
Temperature
control module
St.32
(Connectable max.
units)
Writing data to each temperature control module
Field
Set value
Set value
Monitor value
Monitor value
Monitor area
Field
INP-TN5A2052-E
Read out data from each temperature control module
4-21
4.4 Micrex-SX Programless Communication
System field of setting area
Setting a "demand flag" for system field enables PLC to request PUM to change configuration, readout data, etc.
Item
Reading demand flag
Value
Command
Operation required
0000h
Stop operation
Stop the temperature control module data reading
demand.
0001h
Read out once
Execute the process once: reading out data from
the temperature control module, and updating the
monitor area data field.
0002h
Continuous read out
Execute the process periodically: reading out
data from the temperature control module, and
updating the monitor area data field.
Refer to “SX communication inter-cycle setting”
about the fixed-cycle time.
4-15
0003h
Set value reading out to
the monitor area
Read out parameters’ present values entered
to the setting area form the temperature control
module, and update the monitor area data field.
0004h
Set value reading out to
the setting area
Read out parameters’ present values entered
to the setting area from the temperature control
module, and update the setting area data field.
0000h
Stop operation
Stop the temperature control module data writing
demand.
0001h
Set once
Execute the process once: writing the set
value set in the setting area data filed to the
temperature control module.
Parameter setting demand
flag
0002h
Continuous setting
Execute the process periodically: writing the
data set in the setting area data field to the
temperature control module.
Refer to “SX communication inter-cycle setting”
0000h
Stop operation
about the fixed-cycle time.
4-15
Stop the command execution demand to the
programless communication module.
When the operation select is set to “Stop” with the
programless communication module “Operation
Command setting demand
flag
setting when a programless communication
FFFFh
Communication restoration
demand
fault occurs”
4-18
demand to restart
operation for the programless communication
module stopped with some faults. In addition, set
“0000h” to the command setting demand flag,
the programless communication module starts
communication.
System area 1 (Reserved)
4-22
0000h
None
INP-TN5A2052-E
4.4 Micrex-SXMicrex-SX Programless Communication
Point
●● If you set the value of a demand flag to other than “0000h”, make sure to reset it to "0000h" before performing next demand. A
demand flag is valid only when its value is changed from "0000h".
Note
●● Do not use a command setting demand flag except for when communication restoration demand is necessary.
Data field of setting area
Set the data for writing to the temperature control parameter entered as setting parameters.
The data arrangement order is as set in "Setting area parameter entry".
Point
●● The current set value is read to setting area by performing the "reading demand flag [0004h]" before starting control. This
function saves your labor for setting the initial value on PLC.
Note
●● If you perform data writing with all the memory of setting area set to the initial value, i.e. "0", the device may not operate
properly depends on the contents of setting area entry.
INP-TN5A2052-E
4-23
4.4 Micrex-SX Programless Communication
System field of monitor area
The response result from the PLC to the temperature control module that is required in the setting area system field or the
temperature control module status can be confirmed.
Item
Reading response flag
Parameter setting response
flag
Command setting response
flag
System area 1 (Reserved)
4-24
Value
Response
Explanation
0000h
Stop data area update/
Complying with
demand status
Updating of the data field in the monitor area via the
programless communication is in the stopped state,
or the reading demand flag is in a complying with
demand status.
0001h
to
0004h
Normal response
That the response value is the same as the reading
demand flag means that response to each demand is
the normal response.
8001h
to
8004h
Demand's abnormal
response
Abnormal response to each demand. (The state
that communication errors are occurring between
temperature control modules. Such as, nonexistent
units)
Other
than those
above
Abnormal response
Abnormal status other than the programless
communications. (Such as, device memory setting
duplication, overwrite by PLC sequence program)
0000h
Stop data area update/
Complying with
demand status
Updating data field in the setting area via the
programless communication is in the stopped state or
the parameter setting demand flag is in the complying
with demand status.
0001h
to
0002h
Normal response
That the response value is the same as the reading
demand flag means that the response to each
demand is the normal response.
8001h
to
8002h
Demand's abnormal
response
Abnormal responses to each demand. (The state
that communication errors are occurring between
temperature control modules) The sources: such as,
nonexistent units, the data out of range was written.
Other
than those
above
Abnormal response
Abnormal status other than the programless
communication. (Such as, device memory setting
duplication, overwrite by PLC sequence program)
0000h
Stop data area update/
Complying with
demand status
In the status of complying with the command setting
demand flag.
EEEEh
Stopped state
The programless communication is in the “stopped
state”.
FFFFh
Restoration state
The response to “communication restoration demand”
is normal.
Other
than those
above
Abnormal response
Abnormal status other than the programless
communication. (Such as, device memory setting
duplication, overwrite by PLC sequence program)
0000h
None
INP-TN5A2052-E
4.4 Micrex-SXMicrex-SX Programless Communication
Data field of monitor area
The monitor parameter read from the temperature control module is stored in this field.
Note
●● The reading response flag and the setting response flag sometimes indicate abnormal status simultaneously, depends on
the status of PUM.
Operation of reading demand/response flag
Setting commands for the system field “reading demand flag” in the device memory setting area enables the temperature control
module parameters and the memory values entered as the monitor parameters to be read out to the device memory area data
field. The operation results are set for the “reading response flag” in the monitor area system field in the device memory.
Stop operation (Command: 0000h)
If setting “0000h” for the system field “reading demand flag” in the device memory setting area, the operation that the
temperature control module parameters and the memory values entered as the monitor parameters are read out to the device
memory area data field in the device memory comes to a stop.
PLC
Device memory
Setting area
Monitor area
System field
System field
Data field
Data field
(1) If “0000h” is set for the
reading demand flag, stop
reading command will be sent.
(3) If completed reading out,
“0000h” is set for the
reading response flag
Ethernet
communication
module
Temperature
control module
Temperature
control module
St.1
St.32
(When connected
max. units)
(2) Stop reading the monitor value
Monitor
value
Monitor area
field
Monitor
value
Reading data from each temperature control module
Note
●● If the reading demand flag is not set to “0000h”, the command for the reading demand flag is not complied. When modify the
reading demand flag value, reset the reading demand flag to “0000h”, and then set the value again.
INP-TN5A2052-E
4-25
4.4 Micrex-SX Programless Communication
Read out once (Command: 0001h)
Setting “0001h” for the system field “reading demand flag” in the device memory setting area enables the temperature control
module parameters and the memory values entered as the monitor parameters to be read out once to the device memory area
data field in the device memory.
PLC
Device memory
Setting area
Monitor area
System field
System field
Data field
Data field
(1) If “0001h” is set for the
reading demand flag, the reading
command will be sent once
(3) If completed reading out,
“0001h” will be set to
the reading response flag.
Ethernet
communication
module
Temperature
control module
Temperature
control module
St.1
St.32
(When connected
max. units)
(2) Read out the monitor
value once.
Monitor
value
Monitor area
field
Monitor
value
Reading data from each temperature control module
Point
●● You can save time for data reading at next demand, by performing "stop operation command (0000h)" after finish reading out,
which put programless communication into standby.
4-26
INP-TN5A2052-E
4.4 Micrex-SXMicrex-SX Programless Communication
Continuous reading out (Command: 0002h)
Setting “0002h” for the system field “reading demand flag” in the device memory setting area enables the temperature control
module parameters and the memory values entered as the monitor parameters to be read out periodically to the device memory
area data field in the device memory. (Refer to “SX communication inter-cycle time”
4-15
about the periodical time.)
PLC
Device memory
Setting area
Monitor area
System field
System field
Data field
Data field
(1) If “0002h” is set for the reading
demand flag, reading command
will be sent at a constant period.
(3) If completed reading out,
“0002h” will be set to the
reading response flag.
Ethernet
communication
module
Temperature
control module
Temperature
control module
St.1
St.32
(When connected
max. units)
(2) Reading monitor value
at a constant period.
Monitor
value
Monitor area
field
Monitor
value
Reading data from each temperature control module
If you want to stop continuous reading out, execute stop operation command (0000h) to put the programless communication
module reading demand into the standby state.
Point
●● Internal monitor value for the Ethernet communication module can also be entered to the monitor area. The station number for
the Ethernet communication module is “128”.
INP-TN5A2052-E
4-27
4.4 Micrex-SX Programless Communication
Reading out set values to the monitor area (Command: 0003h)
Setting “0003h” for the system field “reading demand flag”in the device memory setting area enables the present parameter
values entered to the setting area to be read out once from the temperature control module to the monitor area data field in the
device memory.
PLC
Device memory
Setting area
Monitor area
System field
System field
Data field
Data field
(1) If “0003h” is set to the reading
demand flag, command of the
reading set value to the monitor
area will be sent once.
(3) If completed reading out
to the monitor area,
“0003h” will be set for
the reading response flag
Ethernet
communication
module
Temperature
control module
Temperature
control module
St.1
St.32
(When connected
max. units)
Setting area
field
(2) Reading set value to
the monitor area once.
Set value
Set value
Reading data from each temperature control module
Point
●● You can save time for data reading at next demand, by performing "stop operation command (0000h)" after finish reading out,
which put programless communication into standby.
Note
●● With execution of this command, contents of the data field in the monitor area are discarded in order to read out the set
value in the format of the setting area data field to the monitor area data field. If the monitor value in the monitor area is
necessary after executing command, try to read out the monitor value by the reading out command again.
4-28
INP-TN5A2052-E
4.4 Micrex-SXMicrex-SX Programless Communication
Reading out set values to the setting area (Command: 0004h)
Setting “0004h” for the system field “reading demand flag” in the device memory setting area enables the present parameter
values entered to the setting area to be read out once from the temperature control module to the setting area data field in the
device memory.
PLC
Device memory
Setting area
Monitor area
System field
System field
Data field
Data field
(1) If “0004h” is set for the reading
demand flag, the command of
reading set value to the setting
area will be sent.
(3) When completed reading out to
the setting area, “0004h” is set for
the reading response flag
Ethernet
communication
module
Temperature
control module
Temperature
control module
St.1
St.32
(When connected
max. units)
Setting area
field
(2) Read out set value to the setting
area.
Set value
Set value
Reading data from each temperature control module
Point
●● You can save time for data reading at next demand, by performing "stop operation command (0000h)" after finish reading out,
which put programless communication into standby.
INP-TN5A2052-E
4-29
4.4 Micrex-SX Programless Communication
Operation of setting demand/response flag
Setting command for the system field “parameter setting demand flag” in the setting area enables the value of the data field
to be written to the temperature control module parameter entered as the set parameter. The operation results are set for
the“parameter setting response flag” of the system field in the monitor area.
Stop operation (Command: 0000h)
Setting "0000h" for the system field "parameter setting flag" in the device memory setting area enables the value of data field in
the setting area to stop being written to the temperature control module parameter entered as the setting parameter.
PLC
Device memory
Setting area
Monitor area
System field
System field
Data field
Data field
(1) If “0000h” is set for the parameter
setting demand flag, stop writing
command will be sent.
(2) Stop writing
set value
(3) When writing is completed,
“0000h” is set for the parameter
setting response flag
Ethernet
communication
module
Temperature
control module
Temperature
control module
St.1
St.32
(When connected
max. units)
Setting area
field
(2) Stop writing set value
Set value
Set value
The programless communication module comes to be standby for the parameter setting demand with executing this command.
Note
●● When the parameter setting demand flag is not “0000h” (Stopped state), command for the parameter setting demand flag
is not complied. If modify the value of the parameter setting demand flag, set the value after reset the parameter setting
demand flag to “0000h”.
4-30
INP-TN5A2052-E
4.4 Micrex-SXMicrex-SX Programless Communication
Write once (Command: 0001h)
Setting "0001h" for the system field "parameter setting flag" in the device memory setting area enables the value of data field in
the setting area to be written once to the temperature control module parameter entered as the setting parameter.
PLC
Device memory
Setting area
Monitor area
System field
System field
Data field
Data field
(1) If “0001h” is set for the parameter
setting demand flag, the writing
command will be sent once.
(3) When completed writing, “0001h”
is set for the parameter setting
response flag
Ethernet
communication
module
Temperature
control module
Temperature
control module
St.1
St.32
(When connected
max. units)
Setting area
field
Write set values to each temperature control module
(2) Writing set value to the temperature
control module once.
Set value
Set value
After writing, execute the stop operation command (0000h) to put the programless communication module’s parameter setting
demand into the standby status.
Note
●● The temperature control module judges whether the set value has changed, and only if has changed, the set value will be
updated.
●● The parameters of the temperature control module that be reset automatically after executing the command, such as the
temperature control module’s auto tuning parameters, are not reflected in the memory of PLC. Confirm by the reading
demand command, if the command has been executed.
INP-TN5A2052-E
4-31
4.4 Micrex-SX Programless Communication
Continuous writing (Command: 0002h)
Setting "0002h" for the system field "parameter setting flag" in the device memory setting area enables the value of data field in
the setting area to be written periodically to the temperature control module parameter entered as the setting parameter. (Refer
to "SX communication inter-cycle time"
4-15
about the periodical time).
PLC
Device memory
Setting area
Monitor area
System field
System field
Data field
Data field
(1) If “0002h” is set for the parameter setting
demand flag, the writing command
will be set continuously
(3) If completed the writing,
“0002h” will be set to the
parameter setting response flag.
Ethernet
communication
module
Temperature
control module
Temperature
control module
St.1
St.32
(When connected
max. units)
Setting area
field
Write set value to each temperature control module
(2) Write set value to the temperature
control module continuously
Set value
Set value
Execute the stop operation command (0000h) and put the programless communication module to the standby state in order to
stop continuous writing.
4-32
INP-TN5A2052-E
4.4 Micrex-SXMicrex-SX Programless Communication
Operation of command setting demand/response flag
Setting command for the system field “command setting demand flag” in the setting area enables to indicate the operation for the
programless communication module. The operation results are set in the system field “command setting response flag”of the
monitor area.
Stop operation (Command: 0000h)
Command setting demand status is cleared for the programless communication module by setting “0000h” for the “command
setting demand flag”.
PLC
Device memory
Setting area
Monitor area
System field
System field
Data field
Data field
(1) If “0000h” is set for the command setting
demand flag, the command setting
demand will be cleared.
(2) “0000h” is set for the command setting
response flag and showed the command setting
demand flag is in the complying with demand state.
Ethernet
communication
module
Temperature
control module
Temperature
control module
St.1
St.32
(When connected
max. units)
Executing this command puts the programless communication module into the standby status for the command setting demand.
Point
●● The command response flag is 0000h during normal communication.
Note
●● When the command setting demand flag is not set to “0000h” (Stop operation), the command for the command setting
demand flag is not complied with. Set the value after reset the command setting demand flag to “0000h” (Stop operation) to
modify the value of the command setting demand flag.
INP-TN5A2052-E
4-33
4.4 Micrex-SX Programless Communication
Communication restoration demand (Command: FFFFh)
4-18
When "Stop" is selected for "Operation at communication fault" , this command requests the Ethernet
communication module that has stopped operation due to communication fault to restart operation.
PLC
(1) After restoration from the line fault, “EEEEh” will be set
to the command setting response flag.
Device memory
Setting area
Monitor area
System field
System field
Data field
Data field
(2) “FFFFh” is set for the command setting
demand flag, the programless
communication behavior of the
programless communication module
restarts.
(3) After restoration of the communication,
if “FFFFh” is set to the command setting demand flag,
“FFFFh” will be set to the command setting response flag.
(5) After start communication, “0000h” will be set to
the command setting response flag.
Ethernet
communication
module
Temperature
control module
Temperature
control module
St.1
St.32
(When connected
max. units)
(4) The communication starts by changing
the command setting demand flag from
“FFFFh” to “0000h”.
After communication restoration, execute the stop operation command to put the programless communication module’s
command setting demand into the standby status.
Note
●● To execute the restoration procedure, the following two conditions should be satisfied:
- "EEEEh"(Stopped status) has been set for the PLC setting area command setting response flag; and
- the stop operation command of the reading demand flag and the stop operation command of the parameter setting
demand flag has sent the normal response.
●● When "Operation at communication fault" is set to "Stop", be sure to start Micrex-SX before starting PUMCE. If you start
PUMCE before Micrex-SX, command setting response flag of setting area will be set to "EEEEh" and communication
stopped.
4-34
INP-TN5A2052-E
1 Overview
2 System Configuration Example
5
Communication
5.2 Micrex-SX Loader Communication… …… 5-7
5.3 Status… ……………………………………… 5-8
5.4 Address Map and Data Format… ………… 5-10
5.5 Setting/Monitor Area Entry Numbers
(Control module)… ………………………… 5-52
5.6 Setting/Monitor Area Entry Numbers
(Event module)… …………………………… 5-71
5.7 Setting/Monitor Area Entry Numbers
(Analog module)……………………………… 5-78
4 System Configuration
Modbus/TCP… ……………………………… 5-3
3 Installation
5.1 5 Communications
6 Loader Communications
7 Trouble Shooting
INP-TN5A2052-E
5-1
5.1 Modbus/TCP
5-2
INP-TN5A2052-E
5.1 Modbus/TCP
5.1 Modbus/TCP
Modbus/TCP is a Modbus protocol that operates on Ethernet TCP/IP.
Conventional PUM series products have used Modbus/RTU on RS232C or RS485. PUMCE converts Modbus/RTU to Modbus/
TCP, thus allowing PUM series to operate on Ethernet network.
Same as Modbus/RTU, communication in Modbus/TCP is always carried out in a procedure that a master sends a command
message and a corresponding slave sends a response message back.
The following flow diagram shows the communication procedure.
The master sends a command message to
the slave.
The slave checks if the station number in
the received message is the same as its
own number.
When it is the same
The slave runs a command, and sends the
response message
When it is not the same
The slave throws out the message received,
and waits for the next message (No reply)
Message composition
A command message is composed of four parts; a station number, a function code, a data part, and an error check code. They
are sent in the order above.
Field Name
Number of Bytes
Ethernet information
6 bytes
Station Number
1 byte
Function code
1 byte
Data part
2 to 64 bytes
INP-TN5A2052-E
5-3
5.1 Modbus/TCP
Ethernet information
This is the information necessary for TCP/IP communication on Ethernet network.
The following items are to be set.
Field Name
Number of Bytes
Contents
Transmission ID
2 bytes
Specifies the ID for data transmission. Returns the copy of received ID.
Protocol ID
2 bytes
Specifies the protocol number to be used. It is fixed to "0" on PUMCE.
Data length
2 bytes
Specifies the length of data to be transmitted.
Station Number
This is the number allocated to a slave.
Bridge communication: 1 to 32
Mapping communication: 128
Function code
This code specifies the function for the slave to perform.
Data part
These data is required to run the function code. The composition of the data part varies according to function codes.
You need to specify the coil number or the register number allocated to the data in the temperature controller to read or write the
data through communication.
The coil number or the register number in messages uses relative addresses.
The relative address is calculated using the formula below.
Relative address = (The last 4 digits of a coil No. / register No.) -1
Ex.) When a function code specifies a register number "40003",
Relative address= (The last 4 digits of 40003) – 1
5-4
= 0002
is used in the message.
INP-TN5A2052-E
5.1 Modbus/TCP
Slave response
•• Normal slave response
A slave creates and replies the response message to each command message. A slave response message uses the same
format as the corresponding command message.
Contents inside the data part vary according to function codes.
•• Irregular slave response
If there is any problem (such as specification of a nonexistent function code) with the contents of command messages other
than transmission error, a slave creates and sends back an error response message without running the command.
The composition of an error response message is as follows. The function code uses the value that the function code of the
command message plus 80H.
Field Name
Number of Bytes
Ethernet information
6 bytes
Station Number
1 byte
Function code + 80H
1 byte
Error code
1 byte
The error codes are shown below.
Error code
Contents
Description
01H
Function code failure
A nonexistent function code is specified.
02H
Address failure for coil/register
The specified relative address for the coil No. /the register
No. cannot be used by the specified function code.
03H
Coil/register/limit failure
The specified number of words is too many and specifies
the range that does not contain the coil No. /register No.
The specified data is beyond the limit.
06H
Busy state
Under data writing in the register. Retry communication
after more than 100- sec interval.
•• No slave response
In the case that the station number specified by the command message is not the same as the station number specified for a
slave, the slave sends no response.
INP-TN5A2052-E
5-5
5.1 Modbus/TCP
Function code
With MODBUS protocol, the different coil number and register number are allocated for each function code, and each function
code reacts only to a certain coil number/register number.
The diagram below shows the correspondence between the function code and the coil number/register number.
Function code
Code
Coil / Register No.
Function
Target
No.
Contents
03H
Read out (continuous)
Hold register
3xxxx
Read out word data
04H
Read out (continuous)
Input register
4xxxx
Read out/Write word data
06H
Write
Hold register
10H
Write (continuous)
Hold register
The message length by each function is shown below.
Code
Contents
Number of
allocatable data
Command message
Response message
Minimum
Maximum
Minimum
Maximum
03H
Read word data
125 words*
8 bytes
8 bytes
7 bytes
69 bytes
04H
Read out word data (Read out
only)
125 words*
8 bytes
8 bytes
7 bytes
69 bytes
06H
Write word data
1 word
8 bytes
8 bytes
8 bytes
8 bytes
10H
Write series of word data
123 words*
11 bytes
73 bytes
8 bytes
8 bytes
*: “Number of allocatable data” above is limited by the number of data that the equipment allocates for the coil/address number.
(Excluding the function code 06H)
Note
●● Slave response may take some time depends on line condition of LAN when using Ethernet communication. Allow a master
enough time to judge that there is no response from a slave.
5-6
INP-TN5A2052-E
5.2 Micrex-SX Loader Communication
5.2 Micrex-SX Loader Communication
Micrex-SX loader communication is the communication method that uses the loader function of Fuji Electric PLC, Micrex-SX.
Micrex-SX loader communication allows the device that accesses data in a CPU module via the communication port of MicrexSX CPU or NP1L-ET1 to read and write data just by issuing a "demand command". It does not require programming for data
transmission/reception on the CPU module.
Refer to Micrex-SX user's manual for detailed explanation of Micrex-SX loader communication.
INP-TN5A2052-E
5-7
5.3 Communication Status
5.3 Status
The status display is the parameter to monitor the Ethernet module operation.
You can access the status display by reading out from the front face loader port, by mapping communication, or by registering to
the monitor area of Micrex-SX programless communication. (Set the "Monitor area entry St. No." parameter to “128” when entry
for the monitor area.)
Communication module status
The Ethernet communication module operation status can be referred.
Refer to the parameters below.
Parameter
Unit
Attribute
Modbus register No.
(Relative address)
Parameter setting error
None
R
30301(012Ch)
5-8
INP-TN5A2052-E
5.3 Communication Status
Programless communication status
The communication status between the Ethernet communication module and Micrex-SX can be confirmed.
Refer to the parameters below.
Parameter
Unit
Attribute
Modbus register
No.(Relative address)
PLC error counter
time
R
31001(03E8h)
PLC error code
None
R
31002(03E9h)
PLC sending counter
time
R
31003(03EAh)
PLC receiving counter
time
R
31004(03EBh)
PLC reading size
word
R
31005(03ECh)
PLC writing size
word
R
31006(03EDh)
PLC inter-cycle time monitor
msec
R
31007(03EEh)
PLC inter-cycle time over counter
time
R
31008(03EFh)
Description for each parameter
–– PLC error counter
This is the programless communication error counter. It adds a count value“1”-by-“1” on “0” till “65535”, and then back to “0”.
–– PLC error code
The error codes below are stored.
Error code
Description
100H
Command message timeout
101H
Response message timeout
102H
Sum check code error
103H
Header format error
110H
Hardware failure 1
111H
Hardware failure 2
7000H to 7FFFH
Micrex-SX error
–– PLC sending counter
This is the programless communication sending counter. It adds a count value “1”-by-“1” on “0” till “65535”, and then back to “0”.
–– PLC receiving counter
This is the programless communication receiving counter. It adds a count value “1”-by-“1” on “0” till “65535”, and then back to “0”.
–– PLC reading size
This parameter indicates the size of read data on programless communication.
–– PLC writing size
This parameter indicates the size of written data on programless communication.
–– PLC inter-cycle time monitor
This parameter indicates the present value of the inter-PLC communication cycle. It stores the value in msec. The value of
PLC inter-cycle time monitor changes depending on the state of a reading demand flag, a parameter setting demand flag, or a
command setting demand flag.
–– PLC inter-cycle time over counter
This parameter stores the number of times that the 1-cycle programless communication failed to complete within the time set
to "SX communication inter-cycle time".
INP-TN5A2052-E
5-9
5.4 Address Map and Data Format
5.4 Address Map and Data Format
Communication module status
Contents
Reading out/Writing data setting range
Factory-set value
Register No.
Parameter setting error
204h: PLC communication inter-cycle is invalid value
205h: PLC communication starting time is invalid value
206h: PLC response monitoring time is invalid value
207h: Number of PLC communication retry is invalid value
208h: Connection method is invalid value
20Ah: Operation at PLC communication fault is invalid value
210h: Setting area device type is invalid value
211h: Setting area device size is invalid value
212h: Monitor area device type is invalid value
213h: Monitor area device size is invalid value
214h: Setting area detail (The 1st word) is invalid value
215h: Monitor area detail (The 1st word) is invalid value
20Bh: Station bit error
221h: Modbus station response time-out period error
222h: Modbus station abnormal number of consecutive
communication error
22Ah: Bridge communication setting error
-
30301
Communication status with Micrex-SX
Contents
Reading out/Writing data setting range
Factory-set value
Register No.
PLC
error counter
0→1→…→65535→0→1→…times
-
31001
PLC
error code
100h: Command message timeout
101h: Response message timeout
103h: Header format error
7000h to 7FFFh: Micrex-SX error
-
31002
PLC sending counter
0→1→…→65535→0→1→…times
-
31003
PLC
sending counter
0→1→…→65535→0→1→…times
-
31004
PLC
reading size
0 to 712 bytes
-
31005
PLC
writing size
0 to 712 bytes
-
31006
PLC
inter-cycle time monitor
0 to 65535 msec
-
31007
PLC inter-cycle time over
counter
0→1→…→65535→0→1→…times
-
31008
5-10
INP-TN5A2052-E
5.4 Address Map and Data Format
Ethernet communication setting
Contents
Reading out/Writing data setting range
Factory-set value
Register No.
IP address (1)
0000h to FFFFh
C0A8h
40404
IP address (2)
0000h to FFFEh
0064h
40405
Subnet mask (1)
0000h to FFFFh
FFFFh
40406
Subnet mask (2)
0000h to FFFFh
FF00h
40407
Default gateway (1)
0000h to FFFFh
0000h
40408
Default gateway (2)
0000h to FFFFh
0000h
40409
SX communication setting
Contents
Reading out/Writing data setting range
Factory-set value
Register No.
SX communication inter-cycle
time
0 to 5000 msec
100
41050
SX communication starting
time
1 to 255sec
5
41051
SX response monitoring time
10 to 10000 msec
200
41052
Consecutive communication
error count
0 to 10 times
0
41053
Connection method
0: Direct connection with loader1: SX-bus
connection
0
41056
Target SX IP address (1)
0000h to FFFFh
C0A8h
41054
Target SX IP address (2)
0000h to FFFEh
0001h
41055
SX connection ID (H)
0000h to 000Fh
0000h
41058
SX connection ID (L)
0000h to 00FEh
0000h
41057
Operation at programless
communication fault
0: RUN
1: STOP
1
41059
Note
●● In some settings, SX communication inter-cycle cannot be maintained. In such a case, PUMCE reads/writes data as fast as
it can. "PLC inter-cycle time over counter" counts the number of such cases.
●● Configure "SX communication inter-cycle time" so as it is larger than "SX response monitoring time".
INP-TN5A2052-E
5-11
5.4 Address Map and Data Format
SX device setting
Contents
Reading out/Writing data setting range
Factory-set value
Register No.
Setting area device type
1: Setting prohibited
2: Standard memory
3: Setting prohibited
4: Retain memory
2
41060
Setting area start address
(Upper)
0 to 65535
1000
41061
Setting area start address
(Lower)
0 to 65535
0
41062
Setting area device size
0 to 712 words
0
41063
Monitor area device type
1: Setting prohibited
2: Standard memory
3: Setting prohibited
4: Retain memory
2
41064
Monitor area start address
(Upper)
0 to 65535
0
41065
Monitor area start address
(Lower)
0 to 65535
0
41066
Monitor area device size
0 to 712 words
0
41067
5-12
INP-TN5A2052-E
5.4 Address Map and Data Format
Setting area registration
Contents
Reading out/Writing data setting range
Factory-set value
Register No.
Setting area entry St. No.
(The 1st word)
0: Unused
1 to 16: Control/Analog module
17 to 32 : Event module
0
41201
Setting area entry register No.
(The 1st word)
0, 40000 to 49999 (Note1)
0
41202
Setting area entry St. No.
(The 2nd word)
0: Unused
1 to 16: Control/Analog module
17 to 32 : Event module\
0
41203
Setting area entry register No.
(The 2nd word)
0, 40000 to 49999 (Note1)
0
41204
Setting area entry St. No.
(The 711th word)
0: Unused
1 to 16: Control/Analog module
17 to 32 : Event module
0
42621
Setting area entry register No.
(The 711th word)
0, 40000 to 49999 (Note1)
0
42622
Setting area entry St. No.
(The 712th word)
0: Unused
1 to 16: Control/Analog module
17 to 32 : Event module
0
42623
Setting area entry register No.
(The 712th word)
0, 40000 to 49999 (Note1)
0
42624
5-52
Note1: Only the addresses written in “Setting/Monitor area register number” (Control module , Event module
5-71
5-78
, Analog module ) are settable. However, the parameters marked “*” in the “Entry ban”
column cannot be set.
INP-TN5A2052-E
5-13
5.4 Address Map and Data Format
Monitor area registration
Contents
Reading out/Writing data setting range
Factory-set value
Register No.
Monitor area entry St. No.
(The 1st word)
0: Unused
1 to 16: Control/Analog module
17 to 32 : Event module
0
43001
Monitor area entry
register No. (The 1st word)
0, 30000 to 49999 (Note 2)
0
43002
Monitor area entry St. No.
(The 2nd word)
0: Unused
1 to 16: Control/Analog module
17 to 32 : Event module
0
43003
Monitor area entry
register No. (The 2nd word)
0, 30000 to 49999 (Note 2)
0
43004
Monitor area entry St. No.
(The 711th word)
0: Unused
1 to 16: Control/Analog module
17 to 32 : Event module
0
44421
Monitor area entry
register No. (The 711th word)
0, 30000 to 49999 (Note 2)
0
44422
Monitor area entry St. No.
(The 712th word)
0: Unused
1 to 16: Control/Analog module
17 to 32 : Event module
0
44423
Monitor area entry
register No. (The 712th word)
0, 30000 to 49999 (Note 2)
0
44424
5-52
Note 2: Only the addresses written in “Setting/Monitor area register number” (Control module , Event module
5-71
5-78
, Analog module ) are settable. However, the parameters marked “*” in the “Entry ban”
column cannot be set.
5-14
INP-TN5A2052-E
5.4 Address Map and Data Format
Temperature control module internal communication statusn
Contents
Detail
Factory-set value
Register No.
Module operation status (1)
The corresponding bit of a connected
temperature module is turned ON. (ON: in
operation, OFF: stopped)
* Among PUMA/B or PUMV/N/T, the module
of which "Enhanced communication module
(PUMC) connection permission" is set to
"PUMC connected" is the one to be turned ON.
b0: station No.1 to b15: station No.16
0
31105
Module operation status (2)
The corresponding bit of a connected event
module is turned ON.
*Among PUMEs, the module of which
"Enhanced communication module (PUMC)
connection permission" is set to "PUMC
connected" is the one to be turned ON.
b0: station No.17 to b15: station No.32
0
31106
MODBUS communication
status (1)
The corresponding bit of a temperature
control module which is not under MODBUS
communication is turned ON.
* Among PUMA/B or PUMV/N/T, the module
of which "Enhanced communication module
(PUMC) connection permission" is set to
"PUMC connected" is the one to be turned ON.
b0: station No.1 to b15: station No.16
0
31108
MODBUS communication
status (2)
The corresponding bit of an event module
which is not under MODBUS communication is
turned ON.
* The PUME of which "Enhanced
communication module (PUMC) connection
permission" is set to "PUMC connected" is the
one to be turned ON.
b0: station No.17 to b15: station No.32
0
31109
MODBUS communication
error response (1)
If an error response message is received in
MODBUS communication, the corresponding
bit is turned ON.
In a normal response, the corresponding bit is
turned OFF.
* The PUME of which "Enhanced
communication module (PUMC) connection
permission" is set to "PUMC connected" is the
one to be turned ON.
b0: station No.1 to b15: station No.16
0
31111
MODBUS communication
error response (2)
If an error response message is received in
MODBUS communication, the corresponding
bit is turned ON.
In a normal response, the corresponding bit is
turned OFF.
* The PUME of which "Enhanced
communication module (PUMC) connection
permission" is set to "PUMC connected" is the
one to be turned ON.
b0: station No.17 to b15: station No.32
0
31112
INP-TN5A2052-E
5-15
5.4 Address Map and Data Format
Contents
Detail
Factory-set value
Register No.
No. 1 module status (1)
Error counter and error code of the station:
High-order 8 bits: error counter
(0→1→…→255→0→1→…)
Low-order 8 bits: error code
The details of error codes are as follows.
01h to 03h, 06h: the error code stored in the
response message
0Fh: invalid error codes (other than 01h to 03h,
06h) is stored in the response message
11h: Response timeout
12h: Oversized receipt (256 bytes or greater)
13h: Undersized receipt (under 4 bytes)
14h: Response message invalid station No.
15h: Response message CRC error
16h: Response message format error
20h: Invalid device information (during initial
polling)
30h: device size error
0
31114
No. 1 module status (2)
Sending counter of the station:
(0→1→…→65535→0→1→…)
0
31115
No. 1 module status (3)
Receiving counter of the station:
(0→1→…→65535→0→1→…)
0
31116
No. 2 module status (1)
Error counter and error code of a station:
High-order 8 bits: error counter
(0→1→…→255→0→1→…)
Low-order 8 bits: error code
0
31117
No. 2 module status (2)
Sending counter of the station:
(0→1→…→65535→0→1→…)
0
31118
No. 2 module status (3)
Receiving counter of the station:
(0→1→…→65535→0→1→…)
0
31119
No. 3 module status (1)
Error counter and error code of a station:
0
31120
⁞
⁞
⁞
⁞
No. 31 module status (3)
Receiving counter of the station:
0
31206
No. 32 module status (1)
Error counter and error code of a station:
High-order 8 bits: error counter
(0→1→…→255→0→1→…)
Low-order 8 bits: error code
0
31207
No. 32 module status (2)
Sending counter of the station:
(0→1→…→65535→0→1→…)
0
31208
No. 32 module status (3)
Receiving counter of the station:
(0→1→…→65535→0→1→…)
0
31209
Inaccessible
-
-
31213 to 35000
5-16
INP-TN5A2052-E
5.4 Address Map and Data Format
Register number order
Contents
Register
Relative
No.
address
IP address (1)
40404
0190h
IP address (2)
40405
Subnet mask (1)
Subnet mask (2)
Contents
Register
Relative
No.
address
Setting area detail (the 10th word) (1)
41219
04C2h
0191h
Setting area detail (the 10th word) (2)
41220
04C3h
40406
0192h
Setting area detail (the 11th word) (1)
41221
04C4h
40407
0193h
Setting area detail (the 11th word) (2)
41222
04C5h
Default gateway (1)
40408
0194h
Setting area detail (the 12th word) (1)
41223
04C6h
Default gateway (2)
40409
0195h
Setting area detail (the 12th word) (2)
41224
04C7h
SX communication inter-cycle time
41050
0419h
Setting area detail (the 13th word) (1)
41225
04C8h
SX communication starting time
41051
041Ah
Setting area detail (the 13th word) (2)
41226
04C9h
SX response monitoring time
41052
041Bh
Setting area detail (the 14th word) (1)
41227
04CAh
Consecutive communication error count
41053
041Ch
Setting area detail (the 14th word) (2)
41228
04CBh
Target SX IP address (1)
41054
041Dh
Setting area detail (the 15th word) (1)
41229
04CCh
Target SX IP address (2)
41055
041Eh
Setting area detail (the 15th word) (2)
41230
04CDh
SX Connection method
41056
041Fh
Setting area detail (the 16th word) (1)
41231
04CEh
SX connection ID (L)
41057
0420h
Setting area detail (the 16th word) (2)
41232
04CFh
SX connection ID(H)
Operation at programless communication
fault
41058
0421h
Setting area detail (the 17th word) (1)
41233
04D0h
41059
0422h
Setting area detail (the 17th word) (2)
41234
04D1h
Setting area device type
41060
0423h
Setting area detail (the 18th word) (1)
41235
04D2h
Setting area start address (Lower)
41061
0424h
Setting area detail (the 18th word) (2)
41236
04D3h
Setting area start address (Upper)
41062
0425h
Setting area detail (the 19th word) (1)
41237
04D4h
Setting area device size
41063
0426h
Setting area detail (the 19th word) (2)
41238
04D5h
Monitor area device type
41064
0427h
Setting area detail (the 20th word) (1)
41239
04D6h
Monitor area start address (Lower)
41065
0428h
Setting area detail (the 20th word) (2)
41240
04D7h
Monitor area start address (Upper)
41066
0429h
Setting area detail (the 21th word) (1)
41241
04D8h
Monitor area device size
41067
042Ah
Setting area detail (the 21th word) (2)
41242
04D9h
Setting area detail (the 1th word) (1)
41201
04B0h
Setting area detail (the 22th word) (1)
41243
04DAh
Setting area detail (the 1th word) (2)
41202
04B1h
Setting area detail (the 22th word) (2)
41244
04DBh
Setting area detail (the 2th word) (1)
41203
04B2h
Setting area detail (the 23th word) (1)
41245
04DCh
Setting area detail (the 2th word) (2)
41204
04B3h
Setting area detail (the 23th word) (2)
41246
04DDh
Setting area detail (the 3th word) (1)
41205
04B4h
Setting area detail (the 24th word) (1)
41247
04DEh
Setting area detail (the 3th word) (2)
41206
04B5h
Setting area detail (the 24th word) (2)
41248
04DFh
Setting area detail (the 4th word) (1)
41207
04B6h
Setting area detail (the 25th word) (1)
41249
04E0h
Setting area detail (the 4th word) (2)
41208
04B7h
Setting area detail (the 25th word) (2)
41250
04E1h
Setting area detail (the 5th word) (1)
41209
04B8h
Setting area detail (the 26th word) (1)
41251
04E2h
Setting area detail (the 5th word) (2)
41210
04B9h
Setting area detail (the 26th word) (2)
41252
04E3h
Setting area detail (the 6th word) (1)
41211
04BAh
Setting area detail (the 27th word) (1)
41253
04E4h
Setting area detail (the 6th word) (2)
41212
04BBh
Setting area detail (the 27th word) (2)
41254
04E5h
Setting area detail (the 7th word) (1)
41213
04BCh
Setting area detail (the 28th word) (1)
41255
04E6h
Setting area detail (the 7th word) (2)
41214
04BDh
Setting area detail (the 28th word) (2)
41256
04E7h
Setting area detail (the 8th word) (1)
41215
04BEh
Setting area detail (the 29th word) (1)
41257
04E8h
Setting area detail (the 8th word) (2)
41216
04BFh
Setting area detail (the 29th word) (2)
41258
04E9h
Setting area detail (the 9th word) (1)
41217
04C0h
Setting area detail (the 30th word) (1)
41259
04EAh
Setting area detail (the 9th word) (2)
41218
04C1h
Setting area detail (the 30th word) (2)
41260
04EBh
INP-TN5A2052-E
5-17
13
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 31th word) (1)
41261
04ECh
Setting area detail (the 31th word) (2)
41262
Setting area detail (the 32th word) (1)
Setting area detail (the 32th word) (2)
Register
Relative
No.
address
Setting area detail (the 52th word) (1)
41303
0516h
04EDh
Setting area detail (the 52th word) (2)
41304
0517h
41263
04EEh
Setting area detail (the 53th word) (1)
41305
0518h
41264
04EFh
Setting area detail (the 53th word) (2)
41306
0519h
Setting area detail (the 33th word) (1)
41265
04F0h
Setting area detail (the 54th word) (1)
41307
051Ah
Setting area detail (the 33th word) (2)
41266
04F1h
Setting area detail (the 54th word) (2)
41308
051Bh
Setting area detail (the 34th word) (1)
41267
04F2h
Setting area detail (the 55th word) (1)
41309
051Ch
Setting area detail (the 34th word) (2)
41268
04F3h
Setting area detail (the 55th word) (2)
41310
051Dh
Setting area detail (the 35th word) (1)
41269
04F4h
Setting area detail (the 56th word) (1)
41311
051Eh
Setting area detail (the 35th word) (2)
41270
04F5h
Setting area detail (the 56th word) (2)
41312
051Fh
Setting area detail (the 36th word) (1)
41271
04F6h
Setting area detail (the 57th word) (1)
41313
0520h
Setting area detail (the 36th word) (2)
41272
04F7h
Setting area detail (the 57th word) (2)
41314
0521h
Setting area detail (the 37th word) (1)
41273
04F8h
Setting area detail (the 58th word) (1)
41315
0522h
Setting area detail (the 37th word) (2)
41274
04F9h
Setting area detail (the 58th word) (2)
41316
0523h
Setting area detail (the 38th word) (1)
41275
04FAh
Setting area detail (the 59th word) (1)
41317
0524h
Setting area detail (the 38th word) (2)
41276
04FBh
Setting area detail (the 59th word) (2)
41318
0525h
Setting area detail (the 39th word) (1)
41277
04FCh
Setting area detail (the 60th word) (1)
41319
0526h
Setting area detail (the 39th word) (2)
41278
04FDh
Setting area detail (the 60th word) (2)
41320
0527h
Setting area detail (the 40th word) (1)
41279
04FEh
Setting area detail (the 61th word) (1)
41321
0528h
Setting area detail (the 40th word) (2)
41280
04FFh
Setting area detail (the 61th word) (2)
41322
0529h
Setting area detail (the 41th word) (1)
41281
0500h
Setting area detail (the 62th word) (1)
41323
052Ah
Setting area detail (the 41th word) (2)
41282
0501h
Setting area detail (the 62th word) (2)
41324
052Bh
Setting area detail (the 42th word) (1)
41283
0502h
Setting area detail (the 63th word) (1)
41325
052Ch
Setting area detail (the 42th word) (2)
41284
0503h
Setting area detail (the 63th word) (2)
41326
052Dh
Setting area detail (the 43th word) (1)
41285
0504h
Setting area detail (the 64th word) (1)
41327
052Eh
Setting area detail (the 43th word) (2)
41286
0505h
Setting area detail (the 64th word) (2)
41328
052Fh
Setting area detail (the 44th word) (1)
41287
0506h
Setting area detail (the 65th word) (1)
41329
0530h
Setting area detail (the 44th word) (2)
41288
0507h
Setting area detail (the 65th word) (2)
41330
0531h
Setting area detail (the 45th word) (1)
41289
0508h
Setting area detail (the 66th word) (1)
41331
0532h
Setting area detail (the 45th word) (2)
41290
0509h
Setting area detail (the 66th word) (2)
41332
0533h
Setting area detail (the 46th word) (1)
41291
050Ah
Setting area detail (the 67th word) (1)
41333
0534h
Setting area detail (the 46th word) (2)
41292
050Bh
Setting area detail (the 67th word) (2)
41334
0535h
Setting area detail (the 47th word) (1)
41293
050Ch
Setting area detail (the 68th word) (1)
41335
0536h
Setting area detail (the 47th word) (2)
41294
050Dh
Setting area detail (the 68th word) (2)
41336
0537h
Setting area detail (the 48th word) (1)
41295
050Eh
Setting area detail (the 69th word) (1)
41337
0538h
Setting area detail (the 48th word) (2)
41296
050Fh
Setting area detail (the 69th word) (2)
41338
0539h
Setting area detail (the 49th word) (1)
41297
0510h
Setting area detail (the 70th word) (1)
41339
053Ah
Setting area detail (the 49th word) (2)
41298
0511h
Setting area detail (the 70th word) (2)
41340
053Bh
Setting area detail (the 50th word) (1)
41299
0512h
Setting area detail (the 71th word) (1)
41341
053Ch
Setting area detail (the 50th word) (2)
41300
0513h
Setting area detail (the 71th word) (2)
41342
053Dh
Setting area detail (the 51th word) (1)
41301
0514h
Setting area detail (the 72th word) (1)
41343
053Eh
Setting area detail (the 51th word) (2)
41302
0515h
Setting area detail (the 72th word) (2)
41344
053Fh
5-18
14
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 73th word) (1)
41345
0540h
Setting area detail (the 73th word) (2)
41346
Setting area detail (the 74th word) (1)
Setting area detail (the 74th word) (2)
Register
Relative
No.
address
Setting area detail (the 94th word) (1)
41387
056Ah
0541h
Setting area detail (the 94th word) (2)
41388
056Bh
41347
0542h
Setting area detail (the 95th word) (1)
41389
056Ch
41348
0543h
Setting area detail (the 95th word) (2)
41390
056Dh
Setting area detail (the 75th word) (1)
41349
0544h
Setting area detail (the 96th word) (1)
41391
056Eh
Setting area detail (the 75th word) (2)
41350
0545h
Setting area detail (the 96th word) (2)
41392
056Fh
Setting area detail (the 76th word) (1)
41351
0546h
Setting area detail (the 97th word) (1)
41393
0570h
Setting area detail (the 76th word) (2)
41352
0547h
Setting area detail (the 97th word) (2)
41394
0571h
Setting area detail (the 77th word) (1)
41353
0548h
Setting area detail (the 98th word) (1)
41395
0572h
Setting area detail (the 77th word) (2)
41354
0549h
Setting area detail (the 98th word) (2)
41396
0573h
Setting area detail (the 78th word) (1)
41355
054Ah
Setting area detail (the 99th word) (1)
41397
0574h
Setting area detail (the 78th word) (2)
41356
054Bh
Setting area detail (the 99th word) (2)
41398
0575h
Setting area detail (the 79th word) (1)
41357
054Ch
Setting area detail (the 100th word) (1)
41399
0576h
Setting area detail (the 79th word) (2)
41358
054Dh
Setting area detail (the 100th word) (2)
41400
0577h
Setting area detail (the 80th word) (1)
41359
054Eh
Setting area detail (the 101th word) (1)
41401
0578h
Setting area detail (the 80th word) (2)
41360
054Fh
Setting area detail (the 101th word) (2)
41402
0579h
Setting area detail (the 81th word) (1)
41361
0550h
Setting area detail (the 102th word) (1)
41403
057Ah
Setting area detail (the 81th word) (2)
41362
0551h
Setting area detail (the 102th word) (2)
41404
057Bh
Setting area detail (the 82th word) (1)
41363
0552h
Setting area detail (the 103th word) (1)
41405
057Ch
Setting area detail (the 82th word) (2)
41364
0553h
Setting area detail (the 103th word) (2)
41406
057Dh
Setting area detail (the 83th word) (1)
41365
0554h
Setting area detail (the 104th word) (1)
41407
057Eh
Setting area detail (the 83th word) (2)
41366
0555h
Setting area detail (the 104th word) (2)
41408
057Fh
Setting area detail (the 84th word) (1)
41367
0556h
Setting area detail (the 105th word) (1)
41409
0580h
Setting area detail (the 84th word) (2)
41368
0557h
Setting area detail (the 105th word) (2)
41410
0581h
Setting area detail (the 85th word) (1)
41369
0558h
Setting area detail (the 106th word) (1)
41411
0582h
Setting area detail (the 85th word) (2)
41370
0559h
Setting area detail (the 106th word) (2)
41412
0583h
Setting area detail (the 86th word) (1)
41371
055Ah
Setting area detail (the 107th word) (1)
41413
0584h
Setting area detail (the 86th word) (2)
41372
055Bh
Setting area detail (the 107th word) (2)
41414
0585h
Setting area detail (the 87th word) (1)
41373
055Ch
Setting area detail (the 108th word) (1)
41415
0586h
Setting area detail (the 87th word) (2)
41374
055Dh
Setting area detail (the 108th word) (2)
41416
0587h
Setting area detail (the 88th word) (1)
41375
055Eh
Setting area detail (the 109th word) (1)
41417
0588h
Setting area detail (the 88th word) (2)
41376
055Fh
Setting area detail (the 109th word) (2)
41418
0589h
Setting area detail (the 89th word) (1)
41377
0560h
Setting area detail (the 110th word) (1)
41419
058Ah
Setting area detail (the 89th word) (2)
41378
0561h
Setting area detail (the 110th word) (2)
41420
058Bh
Setting area detail (the 90th word) (1)
41379
0562h
Setting area detail (the 111th word) (1)
41421
058Ch
Setting area detail (the 90th word) (2)
41380
0563h
Setting area detail (the 111th word) (2)
41422
058Dh
Setting area detail (the 91th word) (1)
41381
0564h
Setting area detail (the 112th word) (1)
41423
058Eh
Setting area detail (the 91th word) (2)
41382
0565h
Setting area detail (the 112th word) (2)
41424
058Fh
Setting area detail (the 92th word) (1)
41383
0566h
Setting area detail (the 113th word) (1)
41425
0590h
Setting area detail (the 92th word) (2)
41384
0567h
Setting area detail (the 113th word) (2)
41426
0591h
Setting area detail (the 93th word) (1)
41385
0568h
Setting area detail (the 114th word) (1)
41427
0592h
Setting area detail (the 93th word) (2)
41386
0569h
Setting area detail (the 114th word) (2)
41428
0593h
INP-TN5A2052-E
15
Contents
5-19
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 115th word) (1)
41429
0594h
Setting area detail (the 115th word) (2)
41430
Setting area detail (the 116th word) (1)
Setting area detail (the 116th word) (2)
Register
Relative
No.
address
Setting area detail (the 136th word) (1)
41471
05BEh
0595h
Setting area detail (the 136th word) (2)
41472
05BFh
41431
0596h
Setting area detail (the 137th word) (1)
41473
05C0h
41432
0597h
Setting area detail (the 137th word) (2)
41474
05C1h
Setting area detail (the 117th word) (1)
41433
0598h
Setting area detail (the 138th word) (1)
41475
05C2h
Setting area detail (the 117th word) (2)
41434
0599h
Setting area detail (the 138th word) (2)
41476
05C3h
Setting area detail (the 118th word) (1)
41435
059Ah
Setting area detail (the 139th word) (1)
41477
05C4h
Setting area detail (the 118th word) (2)
41436
059Bh
Setting area detail (the 139th word) (2)
41478
05C5h
Setting area detail (the 119th word) (1)
41437
059Ch
Setting area detail (the 140th word) (1)
41479
05C6h
Setting area detail (the 119th word) (2)
41438
059Dh
Setting area detail (the 140th word) (2)
41480
05C7h
Setting area detail (the 120th word) (1)
41439
059Eh
Setting area detail (the 141th word) (1)
41481
05C8h
Setting area detail (the 120th word) (2)
41440
059Fh
Setting area detail (the 141th word) (2)
41482
05C9h
Setting area detail (the 121th word) (1)
41441
05A0h
Setting area detail (the 142th word) (1)
41483
05CAh
Setting area detail (the 121th word) (2)
41442
05A1h
Setting area detail (the 142th word) (2)
41484
05CBh
Setting area detail (the 122th word) (1)
41443
05A2h
Setting area detail (the 143th word) (1)
41485
05CCh
Setting area detail (the 122th word) (2)
41444
05A3h
Setting area detail (the 143th word) (2)
41486
05CDh
Setting area detail (the 123th word) (1)
41445
05A4h
Setting area detail (the 144th word) (1)
41487
05CEh
Setting area detail (the 123th word) (2)
41446
05A5h
Setting area detail (the 144th word) (2)
41488
05CFh
Setting area detail (the 124th word) (1)
41447
05A6h
Setting area detail (the 145th word) (1)
41489
05D0h
Setting area detail (the 124th word) (2)
41448
05A7h
Setting area detail (the 145th word) (2)
41490
05D1h
Setting area detail (the 125th word) (1)
41449
05A8h
Setting area detail (the 146th word) (1)
41491
05D2h
Setting area detail (the 125th word) (2)
41450
05A9h
Setting area detail (the 146th word) (2)
41492
05D3h
Setting area detail (the 126th word) (1)
41451
05AAh
Setting area detail (the 147th word) (1)
41493
05D4h
Setting area detail (the 126th word) (2)
41452
05ABh
Setting area detail (the 147th word) (2)
41494
05D5h
Setting area detail (the 127th word) (1)
41453
05ACh
Setting area detail (the 148th word) (1)
41495
05D6h
Setting area detail (the 127th word) (2)
41454
05ADh
Setting area detail (the 148th word) (2)
41496
05D7h
Setting area detail (the 128th word) (1)
41455
05AEh
Setting area detail (the 149th word) (1)
41497
05D8h
Setting area detail (the 128th word) (2)
41456
05AFh
Setting area detail (the 149th word) (2)
41498
05D9h
Setting area detail (the 129th word) (1)
41457
05B0h
Setting area detail (the 150th word) (1)
41499
05DAh
Setting area detail (the 129th word) (2)
41458
05B1h
Setting area detail (the 150th word) (2)
41500
05DBh
Setting area detail (the 130th word) (1)
41459
05B2h
Setting area detail (the 151th word) (1)
41501
05DCh
Setting area detail (the 130th word) (2)
41460
05B3h
Setting area detail (the 151th word) (2)
41502
05DDh
Setting area detail (the 131th word) (1)
41461
05B4h
Setting area detail (the 152th word) (1)
41503
05DEh
Setting area detail (the 131th word) (2)
41462
05B5h
Setting area detail (the 152th word) (2)
41504
05DFh
Setting area detail (the 132th word) (1)
41463
05B6h
Setting area detail (the 153th word) (1)
41505
05E0h
Setting area detail (the 132th word) (2)
41464
05B7h
Setting area detail (the 153th word) (2)
41506
05E1h
Setting area detail (the 133th word) (1)
41465
05B8h
Setting area detail (the 154th word) (1)
41507
05E2h
Setting area detail (the 133th word) (2)
41466
05B9h
Setting area detail (the 154th word) (2)
41508
05E3h
Setting area detail (the 134th word) (1)
41467
05BAh
Setting area detail (the 155th word) (1)
41509
05E4h
Setting area detail (the 134th word) (2)
41468
05BBh
Setting area detail (the 155th word) (2)
41510
05E5h
Setting area detail (the 135th word) (1)
41469
05BCh
Setting area detail (the 156th word) (1)
41511
05E6h
Setting area detail (the 135th word) (2)
41470
05BDh
Setting area detail (the 156th word) (2)
41512
05E7h
5-20
16
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 157th word) (1)
41513
05E8h
Setting area detail (the 157th word) (2)
41514
Setting area detail (the 158th word) (1)
Setting area detail (the 158th word) (2)
Register
Relative
No.
address
Setting area detail (the 178th word) (1)
41555
0612h
05E9h
Setting area detail (the 178th word) (2)
41556
0613h
41515
05EAh
Setting area detail (the 179th word) (1)
41557
0614h
41516
05EBh
Setting area detail (the 179th word) (2)
41558
0615h
Setting area detail (the 159th word) (1)
41517
05ECh
Setting area detail (the 180th word) (1)
41559
0616h
Setting area detail (the 159th word) (2)
41518
05EDh
Setting area detail (the 180th word) (2)
41560
0617h
Setting area detail (the 160th word) (1)
41519
05EEh
Setting area detail (the 181th word) (1)
41561
0618h
Setting area detail (the 160th word) (2)
41520
05EFh
Setting area detail (the 181th word) (2)
41562
0619h
Setting area detail (the 161th word) (1)
41521
05F0h
Setting area detail (the 182th word) (1)
41563
061Ah
Setting area detail (the 161th word) (2)
41522
05F1h
Setting area detail (the 182th word) (2)
41564
061Bh
Setting area detail (the 162th word) (1)
41523
05F2h
Setting area detail (the 183th word) (1)
41565
061Ch
Setting area detail (the 162th word) (2)
41524
05F3h
Setting area detail (the 183th word) (2)
41566
061Dh
Setting area detail (the 163th word) (1)
41525
05F4h
Setting area detail (the 184th word) (1)
41567
061Eh
Setting area detail (the 163th word) (2)
41526
05F5h
Setting area detail (the 184th word) (2)
41568
061Fh
Setting area detail (the 164th word) (1)
41527
05F6h
Setting area detail (the 185th word) (1)
41569
0620h
Setting area detail (the 164th word) (2)
41528
05F7h
Setting area detail (the 185th word) (2)
41570
0621h
Setting area detail (the 165th word) (1)
41529
05F8h
Setting area detail (the 186th word) (1)
41571
0622h
Setting area detail (the 165th word) (2)
41530
05F9h
Setting area detail (the 186th word) (2)
41572
0623h
Setting area detail (the 166th word) (1)
41531
05FAh
Setting area detail (the 187th word) (1)
41573
0624h
Setting area detail (the 166th word) (2)
41532
05FBh
Setting area detail (the 187th word) (2)
41574
0625h
Setting area detail (the 167th word) (1)
41533
05FCh
Setting area detail (the 188th word) (1)
41575
0626h
Setting area detail (the 167th word) (2)
41534
05FDh
Setting area detail (the 188th word) (2)
41576
0627h
Setting area detail (the 168th word) (1)
41535
05FEh
Setting area detail (the 189th word) (1)
41577
0628h
Setting area detail (the 168th word) (2)
41536
05FFh
Setting area detail (the 189th word) (2)
41578
0629h
Setting area detail (the 169th word) (1)
41537
0600h
Setting area detail (the 190th word) (1)
41579
062Ah
Setting area detail (the 169th word) (2)
41538
0601h
Setting area detail (the 190th word) (2)
41580
062Bh
Setting area detail (the 170th word) (1)
41539
0602h
Setting area detail (the 191th word) (1)
41581
062Ch
Setting area detail (the 170th word) (2)
41540
0603h
Setting area detail (the 191th word) (2)
41582
062Dh
Setting area detail (the 171th word) (1)
41541
0604h
Setting area detail (the 192th word) (1)
41583
062Eh
Setting area detail (the 171th word) (2)
41542
0605h
Setting area detail (the 192th word) (2)
41584
062Fh
Setting area detail (the 172th word) (1)
41543
0606h
Setting area detail (the 193th word) (1)
41585
0630h
Setting area detail (the 172th word) (2)
41544
0607h
Setting area detail (the 193th word) (2)
41586
0631h
Setting area detail (the 173th word) (1)
41545
0608h
Setting area detail (the 194th word) (1)
41587
0632h
Setting area detail (the 173th word) (2)
41546
0609h
Setting area detail (the 194th word) (2)
41588
0633h
Setting area detail (the 174th word) (1)
41547
060Ah
Setting area detail (the 195th word) (1)
41589
0634h
Setting area detail (the 174th word) (2)
41548
060Bh
Setting area detail (the 195th word) (2)
41590
0635h
Setting area detail (the 175th word) (1)
41549
060Ch
Setting area detail (the 196th word) (1)
41591
0636h
Setting area detail (the 175th word) (2)
41550
060Dh
Setting area detail (the 196th word) (2)
41592
0637h
Setting area detail (the 176th word) (1)
41551
060Eh
Setting area detail (the 197th word) (1)
41593
0638h
Setting area detail (the 176th word) (2)
41552
060Fh
Setting area detail (the 197th word) (2)
41594
0639h
Setting area detail (the 177th word) (1)
41553
0610h
Setting area detail (the 198th word) (1)
41595
063Ah
Setting area detail (the 177th word) (2)
41554
0611h
Setting area detail (the 198th word) (2)
41596
063Bh
INP-TN5A2052-E
17
Contents
5-21
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 199th word) (1)
41597
063Ch
Setting area detail (the 199th word) (2)
41598
063Dh
Setting area detail (the 200th word) (1)
41599
Setting area detail (the 200th word) (2)
41600
Setting area detail (the 201th word) (1)
Register
Relative
No.
address
Setting area detail (the 220th word) (1)
41639
0666h
Setting area detail (the 220th word) (2)
41640
0667h
063Eh
Setting area detail (the 221th word) (1)
41641
0668h
063Fh
Setting area detail (the 221th word) (2)
41642
0669h
41601
0640h
Setting area detail (the 222th word) (1)
41643
066Ah
Setting area detail (the 201th word) (2)
41602
0641h
Setting area detail (the 222th word) (2)
41644
066Bh
Setting area detail (the 202th word) (1)
41603
0642h
Setting area detail (the 223th word) (1)
41645
066Ch
Setting area detail (the 202th word) (2)
41604
0643h
Setting area detail (the 223th word) (2)
41646
066Dh
Setting area detail (the 203th word) (1)
41605
0644h
Setting area detail (the 224th word) (1)
41647
066Eh
Setting area detail (the 203th word) (2)
41606
0645h
Setting area detail (the 224th word) (2)
41648
066Fh
Setting area detail (the 204th word) (1)
41607
0646h
Setting area detail (the 225th word) (1)
41649
0670h
Setting area detail (the 204th word) (2)
41608
0647h
Setting area detail (the 225th word) (2)
41650
0671h
Setting area detail (the 205th word) (1)
41609
0648h
Setting area detail (the 226th word) (1)
41651
0672h
Setting area detail (the 205th word) (2)
41610
0649h
Setting area detail (the 226th word) (2)
41652
0673h
Setting area detail (the 206th word) (1)
41611
064Ah
Setting area detail (the 227th word) (1)
41653
0674h
Setting area detail (the 206th word) (2)
41612
064Bh
Setting area detail (the 227th word) (2)
41654
0675h
Setting area detail (the 207th word) (1)
41613
064Ch
Setting area detail (the 228th word) (1)
41655
0676h
Setting area detail (the 207th word) (2)
41614
064Dh
Setting area detail (the 228th word) (2)
41656
0677h
Setting area detail (the 208th word) (1)
41615
064Eh
Setting area detail (the 229th word) (1)
41657
0678h
Setting area detail (the 208th word) (2)
41616
064Fh
Setting area detail (the 229th word) (2)
41658
0679h
Setting area detail (the 209th word) (1)
41617
0650h
Setting area detail (the 230th word) (1)
41659
067Ah
Setting area detail (the 209th word) (2)
41618
0651h
Setting area detail (the 230th word) (2)
41660
067Bh
Setting area detail (the 210th word) (1)
41619
0652h
Setting area detail (the 231th word) (1)
41661
067Ch
Setting area detail (the 210th word) (2)
41620
0653h
Setting area detail (the 231th word) (2)
41662
067Dh
Setting area detail (the 211th word) (1)
41621
0654h
Setting area detail (the 232th word) (1)
41663
067Eh
Setting area detail (the 211th word) (2)
41622
0655h
Setting area detail (the 232th word) (2)
41664
067Fh
Setting area detail (the 212th word) (1)
41623
0656h
Setting area detail (the 233th word) (1)
41665
0680h
Setting area detail (the 212th word) (2)
41624
0657h
Setting area detail (the 233th word) (2)
41666
0681h
Setting area detail (the 213th word) (1)
41625
0658h
Setting area detail (the 234th word) (1)
41667
0682h
Setting area detail (the 213th word) (2)
41626
0659h
Setting area detail (the 234th word) (2)
41668
0683h
Setting area detail (the 214th word) (1)
41627
065Ah
Setting area detail (the 235th word) (1)
41669
0684h
Setting area detail (the 214th word) (2)
41628
065Bh
Setting area detail (the 235th word) (2)
41670
0685h
Setting area detail (the 215th word) (1)
41629
065Ch
Setting area detail (the 236th word) (1)
41671
0686h
Setting area detail (the 215th word) (2)
41630
065Dh
Setting area detail (the 236th word) (2)
41672
0687h
Setting area detail (the 216th word) (1)
41631
065Eh
Setting area detail (the 237th word) (1)
41673
0688h
Setting area detail (the 216th word) (2)
41632
065Fh
Setting area detail (the 237th word) (2)
41674
0689h
Setting area detail (the 217th word) (1)
41633
0660h
Setting area detail (the 238th word) (1)
41675
068Ah
Setting area detail (the 217th word) (2)
41634
0661h
Setting area detail (the 238th word) (2)
41676
068Bh
Setting area detail (the 218th word) (1)
41635
0662h
Setting area detail (the 239th word) (1)
41677
068Ch
Setting area detail (the 218th word) (2)
41636
0663h
Setting area detail (the 239th word) (2)
41678
068Dh
Setting area detail (the 219th word) (1)
41637
0664h
Setting area detail (the 240th word) (1)
41679
068Eh
Setting area detail (the 219th word) (2)
41638
0665h
Setting area detail (the 240th word) (2)
41680
068Fh
5-22
18
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 241th word) (1)
41681
0690h
Setting area detail (the 241th word) (2)
41682
Setting area detail (the 242th word) (1)
Setting area detail (the 242th word) (2)
Register
Relative
No.
address
Setting area detail (the 262th word) (1)
41723
06BAh
0691h
Setting area detail (the 262th word) (2)
41724
06BBh
41683
0692h
Setting area detail (the 263th word) (1)
41725
06BCh
41684
0693h
Setting area detail (the 263th word) (2)
41726
06BDh
Setting area detail (the 243th word) (1)
41685
0694h
Setting area detail (the 264th word) (1)
41727
06BEh
Setting area detail (the 243th word) (2)
41686
0695h
Setting area detail (the 264th word) (2)
41728
06BFh
Setting area detail (the 244th word) (1)
41687
0696h
Setting area detail (the 265th word) (1)
41729
06C0h
Setting area detail (the 244th word) (2)
41688
0697h
Setting area detail (the 265th word) (2)
41730
06C1h
Setting area detail (the 245th word) (1)
41689
0698h
Setting area detail (the 266th word) (1)
41731
06C2h
Setting area detail (the 245th word) (2)
41690
0699h
Setting area detail (the 266th word) (2)
41732
06C3h
Setting area detail (the 246th word) (1)
41691
069Ah
Setting area detail (the 267th word) (1)
41733
06C4h
Setting area detail (the 246th word) (2)
41692
069Bh
Setting area detail (the 267th word) (2)
41734
06C5h
Setting area detail (the 247th word) (1)
41693
069Ch
Setting area detail (the 268th word) (1)
41735
06C6h
Setting area detail (the 247th word) (2)
41694
069Dh
Setting area detail (the 268th word) (2)
41736
06C7h
Setting area detail (the 248th word) (1)
41695
069Eh
Setting area detail (the 269th word) (1)
41737
06C8h
Setting area detail (the 248th word) (2)
41696
069Fh
Setting area detail (the 269th word) (2)
41738
06C9h
Setting area detail (the 249th word) (1)
41697
06A0h
Setting area detail (the 270th word) (1)
41739
06CAh
Setting area detail (the 249th word) (2)
41698
06A1h
Setting area detail (the 270th word) (2)
41740
06CBh
Setting area detail (the 250th word) (1)
41699
06A2h
Setting area detail (the 271th word) (1)
41741
06CCh
Setting area detail (the 250th word) (2)
41700
06A3h
Setting area detail (the 271th word) (2)
41742
06CDh
Setting area detail (the 251th word) (1)
41701
06A4h
Setting area detail (the 272th word) (1)
41743
06CEh
Setting area detail (the 251th word) (2)
41702
06A5h
Setting area detail (the 272th word) (2)
41744
06CFh
Setting area detail (the 252th word) (1)
41703
06A6h
Setting area detail (the 273th word) (1)
41745
06D0h
Setting area detail (the 252th word) (2)
41704
06A7h
Setting area detail (the 273th word) (2)
41746
06D1h
Setting area detail (the 253th word) (1)
41705
06A8h
Setting area detail (the 274th word) (1)
41747
06D2h
Setting area detail (the 253th word) (2)
41706
06A9h
Setting area detail (the 274th word) (2)
41748
06D3h
Setting area detail (the 254th word) (1)
41707
06AAh
Setting area detail (the 275th word) (1)
41749
06D4h
Setting area detail (the 254th word) (2)
41708
06ABh
Setting area detail (the 275th word) (2)
41750
06D5h
Setting area detail (the 255th word) (1)
41709
06ACh
Setting area detail (the 276th word) (1)
41751
06D6h
Setting area detail (the 255th word) (2)
41710
06ADh
Setting area detail (the 276th word) (2)
41752
06D7h
Setting area detail (the 256th word) (1)
41711
06AEh
Setting area detail (the 277th word) (1)
41753
06D8h
Setting area detail (the 256th word) (2)
41712
06AFh
Setting area detail (the 277th word) (2)
41754
06D9h
Setting area detail (the 257th word) (1)
41713
06B0h
Setting area detail (the 278th word) (1)
41755
06DAh
Setting area detail (the 257th word) (2)
41714
06B1h
Setting area detail (the 278th word) (2)
41756
06DBh
Setting area detail (the 258th word) (1)
41715
06B2h
Setting area detail (the 279th word) (1)
41757
06DCh
Setting area detail (the 258th word) (2)
41716
06B3h
Setting area detail (the 279th word) (2)
41758
06DDh
Setting area detail (the 259th word) (1)
41717
06B4h
Setting area detail (the 280th word) (1)
41759
06DEh
Setting area detail (the 259th word) (2)
41718
06B5h
Setting area detail (the 280th word) (2)
41760
06DFh
Setting area detail (the 260th word) (1)
41719
06B6h
Setting area detail (the 281th word) (1)
41761
06E0h
Setting area detail (the 260th word) (2)
41720
06B7h
Setting area detail (the 281th word) (2)
41762
06E1h
Setting area detail (the 261th word) (1)
41721
06B8h
Setting area detail (the 282th word) (1)
41763
06E2h
Setting area detail (the 261th word) (2)
41722
06B9h
Setting area detail (the 282th word) (2)
41764
06E3h
INP-TN5A2052-E
19
Contents
5-23
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 283th word) (1)
41765
06E4h
Setting area detail (the 283th word) (2)
41766
Setting area detail (the 284th word) (1)
Setting area detail (the 284th word) (2)
Register
Relative
No.
address
Setting area detail (the 304th word) (1)
41807
070Eh
06E5h
Setting area detail (the 304th word) (2)
41808
070Fh
41767
06E6h
Setting area detail (the 305th word) (1)
41809
0710h
41768
06E7h
Setting area detail (the 305th word) (2)
41810
0711h
Setting area detail (the 285th word) (1)
41769
06E8h
Setting area detail (the 306th word) (1)
41811
0712h
Setting area detail (the 285th word) (2)
41770
06E9h
Setting area detail (the 306th word) (2)
41812
0713h
Setting area detail (the 286th word) (1)
41771
06EAh
Setting area detail (the 307th word) (1)
41813
0714h
Setting area detail (the 286th word) (2)
41772
06EBh
Setting area detail (the 307th word) (2)
41814
0715h
Setting area detail (the 287th word) (1)
41773
06ECh
Setting area detail (the 308th word) (1)
41815
0716h
Setting area detail (the 287th word) (2)
41774
06EDh
Setting area detail (the 308th word) (2)
41816
0717h
Setting area detail (the 288th word) (1)
41775
06EEh
Setting area detail (the 309th word) (1)
41817
0718h
Setting area detail (the 288th word) (2)
41776
06EFh
Setting area detail (the 309th word) (2)
41818
0719h
Setting area detail (the 289th word) (1)
41777
06F0h
Setting area detail (the 310th word) (1)
41819
071Ah
Setting area detail (the 289th word) (2)
41778
06F1h
Setting area detail (the 310th word) (2)
41820
071Bh
Setting area detail (the 290th word) (1)
41779
06F2h
Setting area detail (the 311th word) (1)
41821
071Ch
Setting area detail (the 290th word) (2)
41780
06F3h
Setting area detail (the 311th word) (2)
41822
071Dh
Setting area detail (the 291th word) (1)
41781
06F4h
Setting area detail (the 312th word) (1)
41823
071Eh
Setting area detail (the 291th word) (2)
41782
06F5h
Setting area detail (the 312th word) (2)
41824
071Fh
Setting area detail (the 292th word) (1)
41783
06F6h
Setting area detail (the 313th word) (1)
41825
0720h
Setting area detail (the 292th word) (2)
41784
06F7h
Setting area detail (the 313th word) (2)
41826
0721h
Setting area detail (the 293th word) (1)
41785
06F8h
Setting area detail (the 314th word) (1)
41827
0722h
Setting area detail (the 293th word) (2)
41786
06F9h
Setting area detail (the 314th word) (2)
41828
0723h
Setting area detail (the 294th word) (1)
41787
06FAh
Setting area detail (the 315th word) (1)
41829
0724h
Setting area detail (the 294th word) (2)
41788
06FBh
Setting area detail (the 315th word) (2)
41830
0725h
Setting area detail (the 295th word) (1)
41789
06FCh
Setting area detail (the 316th word) (1)
41831
0726h
Setting area detail (the 295th word) (2)
41790
06FDh
Setting area detail (the 316th word) (2)
41832
0727h
Setting area detail (the 296th word) (1)
41791
06FEh
Setting area detail (the 317th word) (1)
41833
0728h
Setting area detail (the 296th word) (2)
41792
06FFh
Setting area detail (the 317th word) (2)
41834
0729h
Setting area detail (the 297th word) (1)
41793
0700h
Setting area detail (the 318th word) (1)
41835
072Ah
Setting area detail (the 297th word) (2)
41794
0701h
Setting area detail (the 318th word) (2)
41836
072Bh
Setting area detail (the 298th word) (1)
41795
0702h
Setting area detail (the 319th word) (1)
41837
072Ch
Setting area detail (the 298th word) (2)
41796
0703h
Setting area detail (the 319th word) (2)
41838
072Dh
Setting area detail (the 299th word) (1)
41797
0704h
Setting area detail (the 320th word) (1)
41839
072Eh
Setting area detail (the 299th word) (2)
41798
0705h
Setting area detail (the 320th word) (2)
41840
072Fh
Setting area detail (the 300th word) (1)
41799
0706h
Setting area detail (the 321th word) (1)
41841
0730h
Setting area detail (the 300th word) (2)
41800
0707h
Setting area detail (the 321th word) (2)
41842
0731h
Setting area detail (the 301th word) (1)
41801
0708h
Setting area detail (the 322th word) (1)
41843
0732h
Setting area detail (the 301th word) (2)
41802
0709h
Setting area detail (the 322th word) (2)
41844
0733h
Setting area detail (the 302th word) (1)
41803
070Ah
Setting area detail (the 323th word) (1)
41845
0734h
Setting area detail (the 302th word) (2)
41804
070Bh
Setting area detail (the 323th word) (2)
41846
0735h
Setting area detail (the 303th word) (1)
41805
070Ch
Setting area detail (the 324th word) (1)
41847
0736h
Setting area detail (the 303th word) (2)
41806
070Dh
Setting area detail (the 324th word) (2)
41848
0737h
5-24
20
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 325th word) (1)
41849
0738h
Setting area detail (the 325th word) (2)
41850
0739h
Setting area detail (the 326th word) (1)
41851
Setting area detail (the 326th word) (2)
41852
Setting area detail (the 327th word) (1)
Register
Relative
No.
address
Setting area detail (the 346th word) (1)
41891
0762h
Setting area detail (the 346th word) (2)
41892
0763h
073Ah
Setting area detail (the 347th word) (1)
41893
0764h
073Bh
Setting area detail (the 347th word) (2)
41894
0765h
41853
073Ch
Setting area detail (the 348th word) (1)
41895
0766h
Setting area detail (the 327th word) (2)
41854
073Dh
Setting area detail (the 348th word) (2)
41896
0767h
Setting area detail (the 328th word) (1)
41855
073Eh
Setting area detail (the 349th word) (1)
41897
0768h
Setting area detail (the 328th word) (2)
41856
073Fh
Setting area detail (the 349th word) (2)
41898
0769h
Setting area detail (the 329th word) (1)
41857
0740h
Setting area detail (the 350th word) (1)
41899
076Ah
Setting area detail (the 329th word) (2)
41858
0741h
Setting area detail (the 350th word) (2)
41900
076Bh
Setting area detail (the 330th word) (1)
41859
0742h
Setting area detail (the 351th word) (1)
41901
076Ch
Setting area detail (the 330th word) (2)
41860
0743h
Setting area detail (the 351th word) (2)
41902
076Dh
Setting area detail (the 331th word) (1)
41861
0744h
Setting area detail (the 352th word) (1)
41903
076Eh
Setting area detail (the 331th word) (2)
41862
0745h
Setting area detail (the 352th word) (2)
41904
076Fh
Setting area detail (the 332th word) (1)
41863
0746h
Setting area detail (the 353th word) (1)
41905
0770h
Setting area detail (the 332th word) (2)
41864
0747h
Setting area detail (the 353th word) (2)
41906
0771h
Setting area detail (the 333th word) (1)
41865
0748h
Setting area detail (the 354th word) (1)
41907
0772h
Setting area detail (the 333th word) (2)
41866
0749h
Setting area detail (the 354th word) (2)
41908
0773h
Setting area detail (the 334th word) (1)
41867
074Ah
Setting area detail (the 355th word) (1)
41909
0774h
Setting area detail (the 334th word) (2)
41868
074Bh
Setting area detail (the 355th word) (2)
41910
0775h
Setting area detail (the 335th word) (1)
41869
074Ch
Setting area detail (the 356th word) (1)
41911
0776h
Setting area detail (the 335th word) (2)
41870
074Dh
Setting area detail (the 356th word) (2)
41912
0777h
Setting area detail (the 336th word) (1)
41871
074Eh
Setting area detail (the 357th word) (1)
41913
0778h
Setting area detail (the 336th word) (2)
41872
074Fh
Setting area detail (the 357th word) (2)
41914
0779h
Setting area detail (the 337th word) (1)
41873
0750h
Setting area detail (the 358th word) (1)
41915
077Ah
Setting area detail (the 337th word) (2)
41874
0751h
Setting area detail (the 358th word) (2)
41916
077Bh
Setting area detail (the 338th word) (1)
41875
0752h
Setting area detail (the 359th word) (1)
41917
077Ch
Setting area detail (the 338th word) (2)
41876
0753h
Setting area detail (the 359th word) (2)
41918
077Dh
Setting area detail (the 339th word) (1)
41877
0754h
Setting area detail (the 360th word) (1)
41919
077Eh
Setting area detail (the 339th word) (2)
41878
0755h
Setting area detail (the 360th word) (2)
41920
077Fh
Setting area detail (the 340th word) (1)
41879
0756h
Setting area detail (the 361th word) (1)
41921
0780h
Setting area detail (the 340th word) (2)
41880
0757h
Setting area detail (the 361th word) (2)
41922
0781h
Setting area detail (the 341th word) (1)
41881
0758h
Setting area detail (the 362th word) (1)
41923
0782h
Setting area detail (the 341th word) (2)
41882
0759h
Setting area detail (the 362th word) (2)
41924
0783h
Setting area detail (the 342th word) (1)
41883
075Ah
Setting area detail (the 363th word) (1)
41925
0784h
Setting area detail (the 342th word) (2)
41884
075Bh
Setting area detail (the 363th word) (2)
41926
0785h
Setting area detail (the 343th word) (1)
41885
075Ch
Setting area detail (the 364th word) (1)
41927
0786h
Setting area detail (the 343th word) (2)
41886
075Dh
Setting area detail (the 364th word) (2)
41928
0787h
Setting area detail (the 344th word) (1)
41887
075Eh
Setting area detail (the 365th word) (1)
41929
0788h
Setting area detail (the 344th word) (2)
41888
075Fh
Setting area detail (the 365th word) (2)
41930
0789h
Setting area detail (the 345th word) (1)
41889
0760h
Setting area detail (the 366th word) (1)
41931
078Ah
Setting area detail (the 345th word) (2)
41890
0761h
Setting area detail (the 366th word) (2)
41932
078Bh
INP-TN5A2052-E
21
Contents
5-25
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 367th word) (1)
41933
078Ch
Setting area detail (the 367th word) (2)
41934
078Dh
Setting area detail (the 368th word) (1)
41935
Setting area detail (the 368th word) (2)
41936
Setting area detail (the 369th word) (1)
Register
Relative
No.
address
Setting area detail (the 388th word) (1)
41975
07B6h
Setting area detail (the 388th word) (2)
41976
07B7h
078Eh
Setting area detail (the 389th word) (1)
41977
07B8h
078Fh
Setting area detail (the 389th word) (2)
41978
07B9h
41937
0790h
Setting area detail (the 390th word) (1)
41979
07BAh
Setting area detail (the 369th word) (2)
41938
0791h
Setting area detail (the 390th word) (2)
41980
07BBh
Setting area detail (the 370th word) (1)
41939
0792h
Setting area detail (the 391th word) (1)
41981
07BCh
Setting area detail (the 370th word) (2)
41940
0793h
Setting area detail (the 391th word) (2)
41982
07BDh
Setting area detail (the 371th word) (1)
41941
0794h
Setting area detail (the 392th word) (1)
41983
07BEh
Setting area detail (the 371th word) (2)
41942
0795h
Setting area detail (the 392th word) (2)
41984
07BFh
Setting area detail (the 372th word) (1)
41943
0796h
Setting area detail (the 393th word) (1)
41985
07C0h
Setting area detail (the 372th word) (2)
41944
0797h
Setting area detail (the 393th word) (2)
41986
07C1h
Setting area detail (the 373th word) (1)
41945
0798h
Setting area detail (the 394th word) (1)
41987
07C2h
Setting area detail (the 373th word) (2)
41946
0799h
Setting area detail (the 394th word) (2)
41988
07C3h
Setting area detail (the 374th word) (1)
41947
079Ah
Setting area detail (the 395th word) (1)
41989
07C4h
Setting area detail (the 374th word) (2)
41948
079Bh
Setting area detail (the 395th word) (2)
41990
07C5h
Setting area detail (the 375th word) (1)
41949
079Ch
Setting area detail (the 396th word) (1)
41991
07C6h
Setting area detail (the 375th word) (2)
41950
079Dh
Setting area detail (the 396th word) (2)
41992
07C7h
Setting area detail (the 376th word) (1)
41951
079Eh
Setting area detail (the 397th word) (1)
41993
07C8h
Setting area detail (the 376th word) (2)
41952
079Fh
Setting area detail (the 397th word) (2)
41994
07C9h
Setting area detail (the 377th word) (1)
41953
07A0h
Setting area detail (the 398th word) (1)
41995
07CAh
Setting area detail (the 377th word) (2)
41954
07A1h
Setting area detail (the 398th word) (2)
41996
07CBh
Setting area detail (the 378th word) (1)
41955
07A2h
Setting area detail (the 399th word) (1)
41997
07CCh
Setting area detail (the 378th word) (2)
41956
07A3h
Setting area detail (the 399th word) (2)
41998
07CDh
Setting area detail (the 379th word) (1)
41957
07A4h
Setting area detail (the 400th word) (1)
41999
07CEh
Setting area detail (the 379th word) (2)
41958
07A5h
Setting area detail (the 400th word) (2)
42000
07CFh
Setting area detail (the 380th word) (1)
41959
07A6h
Setting area detail (the 401th word) (1)
42001
07D0h
Setting area detail (the 380th word) (2)
41960
07A7h
Setting area detail (the 401th word) (2)
42002
07D1h
Setting area detail (the 381th word) (1)
41961
07A8h
Setting area detail (the 402th word) (1)
42003
07D2h
Setting area detail (the 381th word) (2)
41962
07A9h
Setting area detail (the 402th word) (2)
42004
07D3h
Setting area detail (the 382th word) (1)
41963
07AAh
Setting area detail (the 403th word) (1)
42005
07D4h
Setting area detail (the 382th word) (2)
41964
07ABh
Setting area detail (the 403th word) (2)
42006
07D5h
Setting area detail (the 383th word) (1)
41965
07ACh
Setting area detail (the 404th word) (1)
42007
07D6h
Setting area detail (the 383th word) (2)
41966
07ADh
Setting area detail (the 404th word) (2)
42008
07D7h
Setting area detail (the 384th word) (1)
41967
07AEh
Setting area detail (the 405th word) (1)
42009
07D8h
Setting area detail (the 384th word) (2)
41968
07AFh
Setting area detail (the 405th word) (2)
42010
07D9h
Setting area detail (the 385th word) (1)
41969
07B0h
Setting area detail (the 406th word) (1)
42011
07DAh
Setting area detail (the 385th word) (2)
41970
07B1h
Setting area detail (the 406th word) (2)
42012
07DBh
Setting area detail (the 386th word) (1)
41971
07B2h
Setting area detail (the 407th word) (1)
42013
07DCh
Setting area detail (the 386th word) (2)
41972
07B3h
Setting area detail (the 407th word) (2)
42014
07DDh
Setting area detail (the 387th word) (1)
41973
07B4h
Setting area detail (the 408th word) (1)
42015
07DEh
Setting area detail (the 387th word) (2)
41974
07B5h
Setting area detail (the 408th word) (2)
42016
07DFh
5-26
22
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 409th word) (1)
42017
07E0h
Setting area detail (the 409th word) (2)
42018
Setting area detail (the 410th word) (1)
Setting area detail (the 410th word) (2)
Register
Relative
No.
address
Setting area detail (the 430th word) (1)
42059
080Ah
07E1h
Setting area detail (the 430th word) (2)
42060
080Bh
42019
07E2h
Setting area detail (the 431th word) (1)
42061
080Ch
42020
07E3h
Setting area detail (the 431th word) (2)
42062
080Dh
Setting area detail (the 411th word) (1)
42021
07E4h
Setting area detail (the 432th word) (1)
42063
080Eh
Setting area detail (the 411th word) (2)
42022
07E5h
Setting area detail (the 432th word) (2)
42064
080Fh
Setting area detail (the 412th word) (1)
42023
07E6h
Setting area detail (the 433th word) (1)
42065
0810h
Setting area detail (the 412th word) (2)
42024
07E7h
Setting area detail (the 433th word) (2)
42066
0811h
Setting area detail (the 413th word) (1)
42025
07E8h
Setting area detail (the 434th word) (1)
42067
0812h
Setting area detail (the 413th word) (2)
42026
07E9h
Setting area detail (the 434th word) (2)
42068
0813h
Setting area detail (the 414th word) (1)
42027
07EAh
Setting area detail (the 435th word) (1)
42069
0814h
Setting area detail (the 414th word) (2)
42028
07EBh
Setting area detail (the 435th word) (2)
42070
0815h
Setting area detail (the 415th word) (1)
42029
07ECh
Setting area detail (the 436th word) (1)
42071
0816h
Setting area detail (the 415th word) (2)
42030
07EDh
Setting area detail (the 436th word) (2)
42072
0817h
Setting area detail (the 416th word) (1)
42031
07EEh
Setting area detail (the 437th word) (1)
42073
0818h
Setting area detail (the 416th word) (2)
42032
07EFh
Setting area detail (the 437th word) (2)
42074
0819h
Setting area detail (the 417th word) (1)
42033
07F0h
Setting area detail (the 438th word) (1)
42075
081Ah
Setting area detail (the 417th word) (2)
42034
07F1h
Setting area detail (the 438th word) (2)
42076
081Bh
Setting area detail (the 418th word) (1)
42035
07F2h
Setting area detail (the 439th word) (1)
42077
081Ch
Setting area detail (the 418th word) (2)
42036
07F3h
Setting area detail (the 439th word) (2)
42078
081Dh
Setting area detail (the 419th word) (1)
42037
07F4h
Setting area detail (the 440th word) (1)
42079
081Eh
Setting area detail (the 419th word) (2)
42038
07F5h
Setting area detail (the 440th word) (2)
42080
081Fh
Setting area detail (the 420th word) (1)
42039
07F6h
Setting area detail (the 441th word) (1)
42081
0820h
Setting area detail (the 420th word) (2)
42040
07F7h
Setting area detail (the 441th word) (2)
42082
0821h
Setting area detail (the 421th word) (1)
42041
07F8h
Setting area detail (the 442th word) (1)
42083
0822h
Setting area detail (the 421th word) (2)
42042
07F9h
Setting area detail (the 442th word) (2)
42084
0823h
Setting area detail (the 422th word) (1)
42043
07FAh
Setting area detail (the 443th word) (1)
42085
0824h
Setting area detail (the 422th word) (2)
42044
07FBh
Setting area detail (the 443th word) (2)
42086
0825h
Setting area detail (the 423th word) (1)
42045
07FCh
Setting area detail (the 444th word) (1)
42087
0826h
Setting area detail (the 423th word) (2)
42046
07FDh
Setting area detail (the 444th word) (2)
42088
0827h
Setting area detail (the 424th word) (1)
42047
07FEh
Setting area detail (the 445th word) (1)
42089
0828h
Setting area detail (the 424th word) (2)
42048
07FFh
Setting area detail (the 445th word) (2)
42090
0829h
Setting area detail (the 425th word) (1)
42049
0800h
Setting area detail (the 446th word) (1)
42091
082Ah
Setting area detail (the 425th word) (2)
42050
0801h
Setting area detail (the 446th word) (2)
42092
082Bh
Setting area detail (the 426th word) (1)
42051
0802h
Setting area detail (the 447th word) (1)
42093
082Ch
Setting area detail (the 426th word) (2)
42052
0803h
Setting area detail (the 447th word) (2)
42094
082Dh
Setting area detail (the 427th word) (1)
42053
0804h
Setting area detail (the 448th word) (1)
42095
082Eh
Setting area detail (the 427th word) (2)
42054
0805h
Setting area detail (the 448th word) (2)
42096
082Fh
Setting area detail (the 428th word) (1)
42055
0806h
Setting area detail (the 449th word) (1)
42097
0830h
Setting area detail (the 428th word) (2)
42056
0807h
Setting area detail (the 449th word) (2)
42098
0831h
Setting area detail (the 429th word) (1)
42057
0808h
Setting area detail (the 450th word) (1)
42099
0832h
Setting area detail (the 429th word) (2)
42058
0809h
Setting area detail (the 450th word) (2)
42100
0833h
INP-TN5A2052-E
23
Contents
5-27
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 451th word) (1)
42101
0834h
Setting area detail (the 451th word) (2)
42102
Setting area detail (the 452th word) (1)
Setting area detail (the 452th word) (2)
Register
Relative
No.
address
Setting area detail (the 472th word) (1)
42143
085Eh
0835h
Setting area detail (the 472th word) (2)
42144
085Fh
42103
0836h
Setting area detail (the 473th word) (1)
42145
0860h
42104
0837h
Setting area detail (the 473th word) (2)
42146
0861h
Setting area detail (the 453th word) (1)
42105
0838h
Setting area detail (the 474th word) (1)
42147
0862h
Setting area detail (the 453th word) (2)
42106
0839h
Setting area detail (the 474th word) (2)
42148
0863h
Setting area detail (the 454th word) (1)
42107
083Ah
Setting area detail (the 475th word) (1)
42149
0864h
Setting area detail (the 454th word) (2)
42108
083Bh
Setting area detail (the 475th word) (2)
42150
0865h
Setting area detail (the 455th word) (1)
42109
083Ch
Setting area detail (the 476th word) (1)
42151
0866h
Setting area detail (the 455th word) (2)
42110
083Dh
Setting area detail (the 476th word) (2)
42152
0867h
Setting area detail (the 456th word) (1)
42111
083Eh
Setting area detail (the 477th word) (1)
42153
0868h
Setting area detail (the 456th word) (2)
42112
083Fh
Setting area detail (the 477th word) (2)
42154
0869h
Setting area detail (the 457th word) (1)
42113
0840h
Setting area detail (the 478th word) (1)
42155
086Ah
Setting area detail (the 457th word) (2)
42114
0841h
Setting area detail (the 478th word) (2)
42156
086Bh
Setting area detail (the 458th word) (1)
42115
0842h
Setting area detail (the 479th word) (1)
42157
086Ch
Setting area detail (the 458th word) (2)
42116
0843h
Setting area detail (the 479th word) (2)
42158
086Dh
Setting area detail (the 459th word) (1)
42117
0844h
Setting area detail (the 480th word) (1)
42159
086Eh
Setting area detail (the 459th word) (2)
42118
0845h
Setting area detail (the 480th word) (2)
42160
086Fh
Setting area detail (the 460th word) (1)
42119
0846h
Setting area detail (the 481th word) (1)
42161
0870h
Setting area detail (the 460th word) (2)
42120
0847h
Setting area detail (the 481th word) (2)
42162
0871h
Setting area detail (the 461th word) (1)
42121
0848h
Setting area detail (the 482th word) (1)
42163
0872h
Setting area detail (the 461th word) (2)
42122
0849h
Setting area detail (the 482th word) (2)
42164
0873h
Setting area detail (the 462th word) (1)
42123
084Ah
Setting area detail (the 483th word) (1)
42165
0874h
Setting area detail (the 462th word) (2)
42124
084Bh
Setting area detail (the 483th word) (2)
42166
0875h
Setting area detail (the 463th word) (1)
42125
084Ch
Setting area detail (the 484th word) (1)
42167
0876h
Setting area detail (the 463th word) (2)
42126
084Dh
Setting area detail (the 484th word) (2)
42168
0877h
Setting area detail (the 464th word) (1)
42127
084Eh
Setting area detail (the 485th word) (1)
42169
0878h
Setting area detail (the 464th word) (2)
42128
084Fh
Setting area detail (the 485th word) (2)
42170
0879h
Setting area detail (the 465th word) (1)
42129
0850h
Setting area detail (the 486th word) (1)
42171
087Ah
Setting area detail (the 465th word) (2)
42130
0851h
Setting area detail (the 486th word) (2)
42172
087Bh
Setting area detail (the 466th word) (1)
42131
0852h
Setting area detail (the 487th word) (1)
42173
087Ch
Setting area detail (the 466th word) (2)
42132
0853h
Setting area detail (the 487th word) (2)
42174
087Dh
Setting area detail (the 467th word) (1)
42133
0854h
Setting area detail (the 488th word) (1)
42175
087Eh
Setting area detail (the 467th word) (2)
42134
0855h
Setting area detail (the 488th word) (2)
42176
087Fh
Setting area detail (the 468th word) (1)
42135
0856h
Setting area detail (the 489th word) (1)
42177
0880h
Setting area detail (the 468th word) (2)
42136
0857h
Setting area detail (the 489th word) (2)
42178
0881h
Setting area detail (the 469th word) (1)
42137
0858h
Setting area detail (the 490th word) (1)
42179
0882h
Setting area detail (the 469th word) (2)
42138
0859h
Setting area detail (the 490th word) (2)
42180
0883h
Setting area detail (the 470th word) (1)
42139
085Ah
Setting area detail (the 491th word) (1)
42181
0884h
Setting area detail (the 470th word) (2)
42140
085Bh
Setting area detail (the 491th word) (2)
42182
0885h
Setting area detail (the 471th word) (1)
42141
085Ch
Setting area detail (the 492th word) (1)
42183
0886h
Setting area detail (the 471th word) (2)
42142
085Dh
Setting area detail (the 492th word) (2)
42184
0887h
5-28
24
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 493th word) (1)
42185
0888h
Setting area detail (the 493th word) (2)
42186
0889h
Setting area detail (the 494th word) (1)
42187
Setting area detail (the 494th word) (2)
42188
Setting area detail (the 495th word) (1)
Register
Relative
No.
address
Setting area detail (the 514th word) (1)
42227
08B2h
Setting area detail (the 514th word) (2)
42228
08B3h
088Ah
Setting area detail (the 515th word) (1)
42229
08B4h
088Bh
Setting area detail (the 515th word) (2)
42230
08B5h
42189
088Ch
Setting area detail (the 516th word) (1)
42231
08B6h
Setting area detail (the 495th word) (2)
42190
088Dh
Setting area detail (the 516th word) (2)
42232
08B7h
Setting area detail (the 496th word) (1)
42191
088Eh
Setting area detail (the 517th word) (1)
42233
08B8h
Setting area detail (the 496th word) (2)
42192
088Fh
Setting area detail (the 517th word) (2)
42234
08B9h
Setting area detail (the 497th word) (1)
42193
0890h
Setting area detail (the 518th word) (1)
42235
08BAh
Setting area detail (the 497th word) (2)
42194
0891h
Setting area detail (the 518th word) (2)
42236
08BBh
Setting area detail (the 498th word) (1)
42195
0892h
Setting area detail (the 519th word) (1)
42237
08BCh
Setting area detail (the 498th word) (2)
42196
0893h
Setting area detail (the 519th word) (2)
42238
08BDh
Setting area detail (the 499th word) (1)
42197
0894h
Setting area detail (the 520th word) (1)
42239
08BEh
Setting area detail (the 499th word) (2)
42198
0895h
Setting area detail (the 520th word) (2)
42240
08BFh
Setting area detail (the 500th word) (1)
42199
0896h
Setting area detail (the 521th word) (1)
42241
08C0h
Setting area detail (the 500th word) (2)
42200
0897h
Setting area detail (the 521th word) (2)
42242
08C1h
Setting area detail (the 501th word) (1)
42201
0898h
Setting area detail (the 522th word) (1)
42243
08C2h
Setting area detail (the 501th word) (2)
42202
0899h
Setting area detail (the 522th word) (2)
42244
08C3h
Setting area detail (the 502th word) (1)
42203
089Ah
Setting area detail (the 523th word) (1)
42245
08C4h
Setting area detail (the 502th word) (2)
42204
089Bh
Setting area detail (the 523th word) (2)
42246
08C5h
Setting area detail (the 503th word) (1)
42205
089Ch
Setting area detail (the 524th word) (1)
42247
08C6h
Setting area detail (the 503th word) (2)
42206
089Dh
Setting area detail (the 524th word) (2)
42248
08C7h
Setting area detail (the 504th word) (1)
42207
089Eh
Setting area detail (the 525th word) (1)
42249
08C8h
Setting area detail (the 504th word) (2)
42208
089Fh
Setting area detail (the 525th word) (2)
42250
08C9h
Setting area detail (the 505th word) (1)
42209
08A0h
Setting area detail (the 526th word) (1)
42251
08CAh
Setting area detail (the 505th word) (2)
42210
08A1h
Setting area detail (the 526th word) (2)
42252
08CBh
Setting area detail (the 506th word) (1)
42211
08A2h
Setting area detail (the 527th word) (1)
42253
08CCh
Setting area detail (the 506th word) (2)
42212
08A3h
Setting area detail (the 527th word) (2)
42254
08CDh
Setting area detail (the 507th word) (1)
42213
08A4h
Setting area detail (the 528th word) (1)
42255
08CEh
Setting area detail (the 507th word) (2)
42214
08A5h
Setting area detail (the 528th word) (2)
42256
08CFh
Setting area detail (the 508th word) (1)
42215
08A6h
Setting area detail (the 529th word) (1)
42257
08D0h
Setting area detail (the 508th word) (2)
42216
08A7h
Setting area detail (the 529th word) (2)
42258
08D1h
Setting area detail (the 509th word) (1)
42217
08A8h
Setting area detail (the 530th word) (1)
42259
08D2h
Setting area detail (the 509th word) (2)
42218
08A9h
Setting area detail (the 530th word) (2)
42260
08D3h
Setting area detail (the 510th word) (1)
42219
08AAh
Setting area detail (the 531th word) (1)
42261
08D4h
Setting area detail (the 510th word) (2)
42220
08ABh
Setting area detail (the 531th word) (2)
42262
08D5h
Setting area detail (the 511th word) (1)
42221
08ACh
Setting area detail (the 532th word) (1)
42263
08D6h
Setting area detail (the 511th word) (2)
42222
08ADh
Setting area detail (the 532th word) (2)
42264
08D7h
Setting area detail (the 512th word) (1)
42223
08AEh
Setting area detail (the 533th word) (1)
42265
08D8h
Setting area detail (the 512th word) (2)
42224
08AFh
Setting area detail (the 533th word) (2)
42266
08D9h
Setting area detail (the 513th word) (1)
42225
08B0h
Setting area detail (the 534th word) (1)
42267
08DAh
Setting area detail (the 513th word) (2)
42226
08B1h
Setting area detail (the 534th word) (2)
42268
08DBh
INP-TN5A2052-E
25
Contents
5-29
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 535th word) (1)
42269
08DCh
Setting area detail (the 535th word) (2)
42270
Setting area detail (the 536th word) (1)
Setting area detail (the 536th word) (2)
Register
Relative
No.
address
Setting area detail (the 556th word) (1)
42311
0906h
08DDh
Setting area detail (the 556th word) (2)
42312
0907h
42271
08DEh
Setting area detail (the 557th word) (1)
42313
0908h
42272
08DFh
Setting area detail (the 557th word) (2)
42314
0909h
Setting area detail (the 537th word) (1)
42273
08E0h
Setting area detail (the 558th word) (1)
42315
090Ah
Setting area detail (the 537th word) (2)
42274
08E1h
Setting area detail (the 558th word) (2)
42316
090Bh
Setting area detail (the 538th word) (1)
42275
08E2h
Setting area detail (the 559th word) (1)
42317
090Ch
Setting area detail (the 538th word) (2)
42276
08E3h
Setting area detail (the 559th word) (2)
42318
090Dh
Setting area detail (the 539th word) (1)
42277
08E4h
Setting area detail (the 560th word) (1)
42319
090Eh
Setting area detail (the 539th word) (2)
42278
08E5h
Setting area detail (the 560th word) (2)
42320
090Fh
Setting area detail (the 540th word) (1)
42279
08E6h
Setting area detail (the 561th word) (1)
42321
0910h
Setting area detail (the 540th word) (2)
42280
08E7h
Setting area detail (the 561th word) (2)
42322
0911h
Setting area detail (the 541th word) (1)
42281
08E8h
Setting area detail (the 562th word) (1)
42323
0912h
Setting area detail (the 541th word) (2)
42282
08E9h
Setting area detail (the 562th word) (2)
42324
0913h
Setting area detail (the 542th word) (1)
42283
08EAh
Setting area detail (the 563th word) (1)
42325
0914h
Setting area detail (the 542th word) (2)
42284
08EBh
Setting area detail (the 563th word) (2)
42326
0915h
Setting area detail (the 543th word) (1)
42285
08ECh
Setting area detail (the 564th word) (1)
42327
0916h
Setting area detail (the 543th word) (2)
42286
08EDh
Setting area detail (the 564th word) (2)
42328
0917h
Setting area detail (the 544th word) (1)
42287
08EEh
Setting area detail (the 565th word) (1)
42329
0918h
Setting area detail (the 544th word) (2)
42288
08EFh
Setting area detail (the 565th word) (2)
42330
0919h
Setting area detail (the 545th word) (1)
42289
08F0h
Setting area detail (the 566th word) (1)
42331
091Ah
Setting area detail (the 545th word) (2)
42290
08F1h
Setting area detail (the 566th word) (2)
42332
091Bh
Setting area detail (the 546th word) (1)
42291
08F2h
Setting area detail (the 567th word) (1)
42333
091Ch
Setting area detail (the 546th word) (2)
42292
08F3h
Setting area detail (the 567th word) (2)
42334
091Dh
Setting area detail (the 547th word) (1)
42293
08F4h
Setting area detail (the 568th word) (1)
42335
091Eh
Setting area detail (the 547th word) (2)
42294
08F5h
Setting area detail (the 568th word) (2)
42336
091Fh
Setting area detail (the 548th word) (1)
42295
08F6h
Setting area detail (the 569th word) (1)
42337
0920h
Setting area detail (the 548th word) (2)
42296
08F7h
Setting area detail (the 569th word) (2)
42338
0921h
Setting area detail (the 549th word) (1)
42297
08F8h
Setting area detail (the 570th word) (1)
42339
0922h
Setting area detail (the 549th word) (2)
42298
08F9h
Setting area detail (the 570th word) (2)
42340
0923h
Setting area detail (the 550th word) (1)
42299
08FAh
Setting area detail (the 571th word) (1)
42341
0924h
Setting area detail (the 550th word) (2)
42300
08FBh
Setting area detail (the 571th word) (2)
42342
0925h
Setting area detail (the 551th word) (1)
42301
08FCh
Setting area detail (the 572th word) (1)
42343
0926h
Setting area detail (the 551th word) (2)
42302
08FDh
Setting area detail (the 572th word) (2)
42344
0927h
Setting area detail (the 552th word) (1)
42303
08FEh
Setting area detail (the 573th word) (1)
42345
0928h
Setting area detail (the 552th word) (2)
42304
08FFh
Setting area detail (the 573th word) (2)
42346
0929h
Setting area detail (the 553th word) (1)
42305
0900h
Setting area detail (the 574th word) (1)
42347
092Ah
Setting area detail (the 553th word) (2)
42306
0901h
Setting area detail (the 574th word) (2)
42348
092Bh
Setting area detail (the 554th word) (1)
42307
0902h
Setting area detail (the 575th word) (1)
42349
092Ch
Setting area detail (the 554th word) (2)
42308
0903h
Setting area detail (the 575th word) (2)
42350
092Dh
Setting area detail (the 555th word) (1)
42309
0904h
Setting area detail (the 576th word) (1)
42351
092Eh
Setting area detail (the 555th word) (2)
42310
0905h
Setting area detail (the 576th word) (2)
42352
092Fh
5-30
26
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 577th word) (1)
42353
0930h
Setting area detail (the 577th word) (2)
42354
Setting area detail (the 578th word) (1)
Setting area detail (the 578th word) (2)
Register
Relative
No.
address
Setting area detail (the 598th word) (1)
42395
095Ah
0931h
Setting area detail (the 598th word) (2)
42396
095Bh
42355
0932h
Setting area detail (the 599th word) (1)
42397
095Ch
42356
0933h
Setting area detail (the 599th word) (2)
42398
095Dh
Setting area detail (the 579th word) (1)
42357
0934h
Setting area detail (the 600th word) (1)
42399
095Eh
Setting area detail (the 579th word) (2)
42358
0935h
Setting area detail (the 600th word) (2)
42400
095Fh
Setting area detail (the 580th word) (1)
42359
0936h
Setting area detail (the 601th word) (1)
42401
0960h
Setting area detail (the 580th word) (2)
42360
0937h
Setting area detail (the 601th word) (2)
42402
0961h
Setting area detail (the 581th word) (1)
42361
0938h
Setting area detail (the 602th word) (1)
42403
0962h
Setting area detail (the 581th word) (2)
42362
0939h
Setting area detail (the 602th word) (2)
42404
0963h
Setting area detail (the 582th word) (1)
42363
093Ah
Setting area detail (the 603th word) (1)
42405
0964h
Setting area detail (the 582th word) (2)
42364
093Bh
Setting area detail (the 603th word) (2)
42406
0965h
Setting area detail (the 583th word) (1)
42365
093Ch
Setting area detail (the 604th word) (1)
42407
0966h
Setting area detail (the 583th word) (2)
42366
093Dh
Setting area detail (the 604th word) (2)
42408
0967h
Setting area detail (the 584th word) (1)
42367
093Eh
Setting area detail (the 605th word) (1)
42409
0968h
Setting area detail (the 584th word) (2)
42368
093Fh
Setting area detail (the 605th word) (2)
42410
0969h
Setting area detail (the 585th word) (1)
42369
0940h
Setting area detail (the 606th word) (1)
42411
096Ah
Setting area detail (the 585th word) (2)
42370
0941h
Setting area detail (the 606th word) (2)
42412
096Bh
Setting area detail (the 586th word) (1)
42371
0942h
Setting area detail (the 607th word) (1)
42413
096Ch
Setting area detail (the 586th word) (2)
42372
0943h
Setting area detail (the 607th word) (2)
42414
096Dh
Setting area detail (the 587th word) (1)
42373
0944h
Setting area detail (the 608th word) (1)
42415
096Eh
Setting area detail (the 587th word) (2)
42374
0945h
Setting area detail (the 608th word) (2)
42416
096Fh
Setting area detail (the 588th word) (1)
42375
0946h
Setting area detail (the 609th word) (1)
42417
0970h
Setting area detail (the 588th word) (2)
42376
0947h
Setting area detail (the 609th word) (2)
42418
0971h
Setting area detail (the 589th word) (1)
42377
0948h
Setting area detail (the 610th word) (1)
42419
0972h
Setting area detail (the 589th word) (2)
42378
0949h
Setting area detail (the 610th word) (2)
42420
0973h
Setting area detail (the 590th word) (1)
42379
094Ah
Setting area detail (the 611th word) (1)
42421
0974h
Setting area detail (the 590th word) (2)
42380
094Bh
Setting area detail (the 611th word) (2)
42422
0975h
Setting area detail (the 591th word) (1)
42381
094Ch
Setting area detail (the 612th word) (1)
42423
0976h
Setting area detail (the 591th word) (2)
42382
094Dh
Setting area detail (the 612th word) (2)
42424
0977h
Setting area detail (the 592th word) (1)
42383
094Eh
Setting area detail (the 613th word) (1)
42425
0978h
Setting area detail (the 592th word) (2)
42384
094Fh
Setting area detail (the 613th word) (2)
42426
0979h
Setting area detail (the 593th word) (1)
42385
0950h
Setting area detail (the 614th word) (1)
42427
097Ah
Setting area detail (the 593th word) (2)
42386
0951h
Setting area detail (the 614th word) (2)
42428
097Bh
Setting area detail (the 594th word) (1)
42387
0952h
Setting area detail (the 615th word) (1)
42429
097Ch
Setting area detail (the 594th word) (2)
42388
0953h
Setting area detail (the 615th word) (2)
42430
097Dh
Setting area detail (the 595th word) (1)
42389
0954h
Setting area detail (the 616th word) (1)
42431
097Eh
Setting area detail (the 595th word) (2)
42390
0955h
Setting area detail (the 616th word) (2)
42432
097Fh
Setting area detail (the 596th word) (1)
42391
0956h
Setting area detail (the 617th word) (1)
42433
0980h
Setting area detail (the 596th word) (2)
42392
0957h
Setting area detail (the 617th word) (2)
42434
0981h
Setting area detail (the 597th word) (1)
42393
0958h
Setting area detail (the 618th word) (1)
42435
0982h
Setting area detail (the 597th word) (2)
42394
0959h
Setting area detail (the 618th word) (2)
42436
0983h
INP-TN5A2052-E
27
Contents
5-31
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 619th word) (1)
42437
0984h
Setting area detail (the 619th word) (2)
42438
Setting area detail (the 620th word) (1)
Setting area detail (the 620th word) (2)
Register
Relative
No.
address
Setting area detail (the 640th word) (1)
42479
09AEh
0985h
Setting area detail (the 640th word) (2)
42480
09AFh
42439
0986h
Setting area detail (the 641th word) (1)
42481
09B0h
42440
0987h
Setting area detail (the 641th word) (2)
42482
09B1h
Setting area detail (the 621th word) (1)
42441
0988h
Setting area detail (the 642th word) (1)
42483
09B2h
Setting area detail (the 621th word) (2)
42442
0989h
Setting area detail (the 642th word) (2)
42484
09B3h
Setting area detail (the 622th word) (1)
42443
098Ah
Setting area detail (the 643th word) (1)
42485
09B4h
Setting area detail (the 622th word) (2)
42444
098Bh
Setting area detail (the 643th word) (2)
42486
09B5h
Setting area detail (the 623th word) (1)
42445
098Ch
Setting area detail (the 644th word) (1)
42487
09B6h
Setting area detail (the 623th word) (2)
42446
098Dh
Setting area detail (the 644th word) (2)
42488
09B7h
Setting area detail (the 624th word) (1)
42447
098Eh
Setting area detail (the 645th word) (1)
42489
09B8h
Setting area detail (the 624th word) (2)
42448
098Fh
Setting area detail (the 645th word) (2)
42490
09B9h
Setting area detail (the 625th word) (1)
42449
0990h
Setting area detail (the 646th word) (1)
42491
09BAh
Setting area detail (the 625th word) (2)
42450
0991h
Setting area detail (the 646th word) (2)
42492
09BBh
Setting area detail (the 626th word) (1)
42451
0992h
Setting area detail (the 647th word) (1)
42493
09BCh
Setting area detail (the 626th word) (2)
42452
0993h
Setting area detail (the 647th word) (2)
42494
09BDh
Setting area detail (the 627th word) (1)
42453
0994h
Setting area detail (the 648th word) (1)
42495
09BEh
Setting area detail (the 627th word) (2)
42454
0995h
Setting area detail (the 648th word) (2)
42496
09BFh
Setting area detail (the 628th word) (1)
42455
0996h
Setting area detail (the 649th word) (1)
42497
09C0h
Setting area detail (the 628th word) (2)
42456
0997h
Setting area detail (the 649th word) (2)
42498
09C1h
Setting area detail (the 629th word) (1)
42457
0998h
Setting area detail (the 650th word) (1)
42499
09C2h
Setting area detail (the 629th word) (2)
42458
0999h
Setting area detail (the 650th word) (2)
42500
09C3h
Setting area detail (the 630th word) (1)
42459
099Ah
Setting area detail (the 651th word) (1)
42501
09C4h
Setting area detail (the 630th word) (2)
42460
099Bh
Setting area detail (the 651th word) (2)
42502
09C5h
Setting area detail (the 631th word) (1)
42461
099Ch
Setting area detail (the 652th word) (1)
42503
09C6h
Setting area detail (the 631th word) (2)
42462
099Dh
Setting area detail (the 652th word) (2)
42504
09C7h
Setting area detail (the 632th word) (1)
42463
099Eh
Setting area detail (the 653th word) (1)
42505
09C8h
Setting area detail (the 632th word) (2)
42464
099Fh
Setting area detail (the 653th word) (2)
42506
09C9h
Setting area detail (the 633th word) (1)
42465
09A0h
Setting area detail (the 654th word) (1)
42507
09CAh
Setting area detail (the 633th word) (2)
42466
09A1h
Setting area detail (the 654th word) (2)
42508
09CBh
Setting area detail (the 634th word) (1)
42467
09A2h
Setting area detail (the 655th word) (1)
42509
09CCh
Setting area detail (the 634th word) (2)
42468
09A3h
Setting area detail (the 655th word) (2)
42510
09CDh
Setting area detail (the 635th word) (1)
42469
09A4h
Setting area detail (the 656th word) (1)
42511
09CEh
Setting area detail (the 635th word) (2)
42470
09A5h
Setting area detail (the 656th word) (2)
42512
09CFh
Setting area detail (the 636th word) (1)
42471
09A6h
Setting area detail (the 657th word) (1)
42513
09D0h
Setting area detail (the 636th word) (2)
42472
09A7h
Setting area detail (the 657th word) (2)
42514
09D1h
Setting area detail (the 637th word) (1)
42473
09A8h
Setting area detail (the 658th word) (1)
42515
09D2h
Setting area detail (the 637th word) (2)
42474
09A9h
Setting area detail (the 658th word) (2)
42516
09D3h
Setting area detail (the 638th word) (1)
42475
09AAh
Setting area detail (the 659th word) (1)
42517
09D4h
Setting area detail (the 638th word) (2)
42476
09ABh
Setting area detail (the 659th word) (2)
42518
09D5h
Setting area detail (the 639th word) (1)
42477
09ACh
Setting area detail (the 660th word) (1)
42519
09D6h
Setting area detail (the 639th word) (2)
42478
09ADh
Setting area detail (the 660th word) (2)
42520
09D7h
5-32
28
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 661th word) (1)
42521
09D8h
Setting area detail (the 661th word) (2)
42522
Setting area detail (the 662th word) (1)
Setting area detail (the 662th word) (2)
Register
Relative
No.
address
Setting area detail (the 682th word) (1)
42563
0A02h
09D9h
Setting area detail (the 682th word) (2)
42564
0A03h
42523
09DAh
Setting area detail (the 683th word) (1)
42565
0A04h
42524
09DBh
Setting area detail (the 683th word) (2)
42566
0A05h
Setting area detail (the 663th word) (1)
42525
09DCh
Setting area detail (the 684th word) (1)
42567
0A06h
Setting area detail (the 663th word) (2)
42526
09DDh
Setting area detail (the 684th word) (2)
42568
0A07h
Setting area detail (the 664th word) (1)
42527
09DEh
Setting area detail (the 685th word) (1)
42569
0A08h
Setting area detail (the 664th word) (2)
42528
09DFh
Setting area detail (the 685th word) (2)
42570
0A09h
Setting area detail (the 665th word) (1)
42529
09E0h
Setting area detail (the 686th word) (1)
42571
0A0Ah
Setting area detail (the 665th word) (2)
42530
09E1h
Setting area detail (the 686th word) (2)
42572
0A0Bh
Setting area detail (the 666th word) (1)
42531
09E2h
Setting area detail (the 687th word) (1)
42573
0A0Ch
Setting area detail (the 666th word) (2)
42532
09E3h
Setting area detail (the 687th word) (2)
42574
0A0Dh
Setting area detail (the 667th word) (1)
42533
09E4h
Setting area detail (the 688th word) (1)
42575
0A0Eh
Setting area detail (the 667th word) (2)
42534
09E5h
Setting area detail (the 688th word) (2)
42576
0A0Fh
Setting area detail (the 668th word) (1)
42535
09E6h
Setting area detail (the 689th word) (1)
42577
0A10h
Setting area detail (the 668th word) (2)
42536
09E7h
Setting area detail (the 689th word) (2)
42578
0A11h
Setting area detail (the 669th word) (1)
42537
09E8h
Setting area detail (the 690th word) (1)
42579
0A12h
Setting area detail (the 669th word) (2)
42538
09E9h
Setting area detail (the 690th word) (2)
42580
0A13h
Setting area detail (the 670th word) (1)
42539
09EAh
Setting area detail (the 691th word) (1)
42581
0A14h
Setting area detail (the 670th word) (2)
42540
09EBh
Setting area detail (the 691th word) (2)
42582
0A15h
Setting area detail (the 671th word) (1)
42541
09ECh
Setting area detail (the 692th word) (1)
42583
0A16h
Setting area detail (the 671th word) (2)
42542
09EDh
Setting area detail (the 692th word) (2)
42584
0A17h
Setting area detail (the 672th word) (1)
42543
09EEh
Setting area detail (the 693th word) (1)
42585
0A18h
Setting area detail (the 672th word) (2)
42544
09EFh
Setting area detail (the 693th word) (2)
42586
0A19h
Setting area detail (the 673th word) (1)
42545
09F0h
Setting area detail (the 694th word) (1)
42587
0A1Ah
Setting area detail (the 673th word) (2)
42546
09F1h
Setting area detail (the 694th word) (2)
42588
0A1Bh
Setting area detail (the 674th word) (1)
42547
09F2h
Setting area detail (the 695th word) (1)
42589
0A1Ch
Setting area detail (the 674th word) (2)
42548
09F3h
Setting area detail (the 695th word) (2)
42590
0A1Dh
Setting area detail (the 675th word) (1)
42549
09F4h
Setting area detail (the 696th word) (1)
42591
0A1Eh
Setting area detail (the 675th word) (2)
42550
09F5h
Setting area detail (the 696th word) (2)
42592
0A1Fh
Setting area detail (the 676th word) (1)
42551
09F6h
Setting area detail (the 697th word) (1)
42593
0A20h
Setting area detail (the 676th word) (2)
42552
09F7h
Setting area detail (the 697th word) (2)
42594
0A21h
Setting area detail (the 677th word) (1)
42553
09F8h
Setting area detail (the 698th word) (1)
42595
0A22h
Setting area detail (the 677th word) (2)
42554
09F9h
Setting area detail (the 698th word) (2)
42596
0A23h
Setting area detail (the 678th word) (1)
42555
09FAh
Setting area detail (the 699th word) (1)
42597
0A24h
Setting area detail (the 678th word) (2)
42556
09FBh
Setting area detail (the 699th word) (2)
42598
0A25h
Setting area detail (the 679th word) (1)
42557
09FCh
Setting area detail (the 700th word) (1)
42599
0A26h
Setting area detail (the 679th word) (2)
42558
09FDh
Setting area detail (the 700th word) (2)
42600
0A27h
Setting area detail (the 680th word) (1)
42559
09FEh
Setting area detail (the 701th word) (1)
42601
0A28h
Setting area detail (the 680th word) (2)
42560
09FFh
Setting area detail (the 701th word) (2)
42602
0A29h
Setting area detail (the 681th word) (1)
42561
0A00h
Setting area detail (the 702th word) (1)
42603
0A2Ah
Setting area detail (the 681th word) (2)
42562
0A01h
Setting area detail (the 702th word) (2)
42604
0A2Bh
INP-TN5A2052-E
29
Contents
5-33
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Setting area detail (the 703th word) (1)
42605
0A2Ch
Setting area detail (the 703th word) (2)
42606
Setting area detail (the 704th word) (1)
Setting area detail (the 704th word) (2)
Contents
Register
Relative
No.
address
Monitor area detail (the 12th word) (1)
43023
0BCEh
0A2Dh
Monitor area detail (the 12th word) (2)
43024
0BCFh
42607
0A2Eh
Monitor area detail (the 13th word) (1)
43025
0BD0h
42608
0A2Fh
Monitor area detail (the 13th word) (2)
43026
0BD1h
Setting area detail (the 705th word) (1)
42609
0A30h
Monitor area detail (the 14th word) (1)
43027
0BD2h
Setting area detail (the 705th word) (2)
42610
0A31h
Monitor area detail (the 14th word) (2)
43028
0BD3h
Setting area detail (the 706th word) (1)
42611
0A32h
Monitor area detail (the 15th word) (1)
43029
0BD4h
Setting area detail (the 706th word) (2)
42612
0A33h
Monitor area detail (the 15th word) (2)
43030
0BD5h
Setting area detail (the 707th word) (1)
42613
0A34h
Monitor area detail (the 16th word) (1)
43031
0BD6h
Setting area detail (the 707th word) (2)
42614
0A35h
Monitor area detail (the 16th word) (2)
43032
0BD7h
Setting area detail (the 708th word) (1)
42615
0A36h
Monitor area detail (the 17th word) (1)
43033
0BD8h
Setting area detail (the 708th word) (2)
42616
0A37h
Monitor area detail (the 17th word) (2)
43034
0BD9h
Setting area detail (the 709th word) (1)
42617
0A38h
Monitor area detail (the 18th word) (1)
43035
0BDAh
Setting area detail (the 709th word) (2)
42618
0A39h
Monitor area detail (the 18th word) (2)
43036
0BDBh
Setting area detail (the 710th word) (1)
42619
0A3Ah
Monitor area detail (the 19th word) (1)
43037
0BDCh
Setting area detail (the 710th word) (2)
42620
0A3Bh
Monitor area detail (the 19th word) (2)
43038
0BDDh
Setting area detail (the 711th word) (1)
42621
0A3Ch
Monitor area detail (the 20th word) (1)
43039
0BDEh
Setting area detail (the 711th word) (2)
42622
0A3Dh
Monitor area detail (the 20th word) (2)
43040
0BDFh
Setting area detail (the 712th word) (1)
42623
0A3Eh
Monitor area detail (the 21th word) (1)
43041
0BE0h
Setting area detail (the 712th word) (2)
42624
0A3Fh
Monitor area detail (the 21th word) (2)
43042
0BE1h
Monitor area detail (the1st word) (1)
43001
0BB8h
Monitor area detail (the 22th word) (1)
43043
0BE2h
Monitor area detail (the 1st word) (2)
43002
0BB9h
Monitor area detail (the 22th word) (2)
43044
0BE3h
Monitor area detail (the 2nd word) (1)
43003
0BBAh
Monitor area detail (the 23th word) (1)
43045
0BE4h
Monitor area detail (the 2nd word) (2)
43004
0BBBh
Monitor area detail (the 23th word) (2)
43046
0BE5h
Monitor area detail (the 3rd word) (1)
43005
0BBCh
Monitor area detail (the 24th word) (1)
43047
0BE6h
Monitor area detail (the 3rd word) (2)
43006
0BBDh
Monitor area detail (the 24th word) (2)
43048
0BE7h
Monitor area detail (the 4th word) (1)
43007
0BBEh
Monitor area detail (the 25th word) (1)
43049
0BE8h
Monitor area detail (the 4th word) (2)
43008
0BBFh
Monitor area detail (the 25th word) (2)
43050
0BE9h
Monitor area detail (the 5th word) (1)
43009
0BC0h
Monitor area detail (the 26th word) (1)
43051
0BEAh
Monitor area detail (the 5th word) (2)
43010
0BC1h
Monitor area detail (the 26th word) (2)
43052
0BEBh
Monitor area detail (the 6th word) (1)
43011
0BC2h
Monitor area detail (the 27th word) (1)
43053
0BECh
Monitor area detail (the 6th word) (2)
43012
0BC3h
Monitor area detail (the 27th word) (2)
43054
0BEDh
Monitor area detail (the 7th word) (1)
43013
0BC4h
Monitor area detail (the 28th word) (1)
43055
0BEEh
Monitor area detail (the 7th word) (2)
43014
0BC5h
Monitor area detail (the 28th word) (2)
43056
0BEFh
Monitor area detail (the 8th word) (1)
43015
0BC6h
Monitor area detail (the 29th word) (1)
43057
0BF0h
Monitor area detail (the 8th word) (2)
43016
0BC7h
Monitor area detail (the 29th word) (2)
43058
0BF1h
Monitor area detail (the 9th word) (1)
43017
0BC8h
Monitor area detail (the 30th word) (1)
43059
0BF2h
Monitor area detail (the 9th word) (2)
43018
0BC9h
Monitor area detail (the 30th word) (2)
43060
0BF3h
Monitor area detail (the 10th word) (1)
43019
0BCAh
Monitor area detail (the 31th word) (1)
43061
0BF4h
Monitor area detail (the 10th word) (2)
43020
0BCBh
Monitor area detail (the 31th word) (2)
43062
0BF5h
Monitor area detail (the 11th word) (1)
43021
0BCCh
Monitor area detail (the 32th word) (1)
43063
0BF6h
Monitor area detail (the 11th word) (2)
43022
0BCDh
Monitor area detail (the 32th word) (2)
43064
0BF7h
5-34
30
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 33th word) (1)
43065
0BF8h
Monitor area detail (the 33th word) (2)
43066
Monitor area detail (the 34th word) (1)
Monitor area detail (the 34th word) (2)
Register
Relative
No.
address
Monitor area detail (the 54th word) (1)
43107
0C22h
0BF9h
Monitor area detail (the 54th word) (2)
43108
0C23h
43067
0BFAh
Monitor area detail (the 55th word) (1)
43109
0C24h
43068
0BFBh
Monitor area detail (the 55th word) (2)
43110
0C25h
Monitor area detail (the 35th word) (1)
43069
0BFCh
Monitor area detail (the 56th word) (1)
43111
0C26h
Monitor area detail (the 35th word) (2)
43070
0BFDh
Monitor area detail (the 56th word) (2)
43112
0C27h
Monitor area detail (the 36th word) (1)
43071
0BFEh
Monitor area detail (the 57th word) (1)
43113
0C28h
Monitor area detail (the 36th word) (2)
43072
0BFFh
Monitor area detail (the 57th word) (2)
43114
0C29h
Monitor area detail (the 37th word) (1)
43073
0C00h
Monitor area detail (the 58th word) (1)
43115
0C2Ah
Monitor area detail (the 37th word) (2)
43074
0C01h
Monitor area detail (the 58th word) (2)
43116
0C2Bh
Monitor area detail (the 38th word) (1)
43075
0C02h
Monitor area detail (the 59th word) (1)
43117
0C2Ch
Monitor area detail (the 38th word) (2)
43076
0C03h
Monitor area detail (the 59th word) (2)
43118
0C2Dh
Monitor area detail (the 39th word) (1)
43077
0C04h
Monitor area detail (the 60th word) (1)
43119
0C2Eh
Monitor area detail (the 39th word) (2)
43078
0C05h
Monitor area detail (the 60th word) (2)
43120
0C2Fh
Monitor area detail (the 40th word) (1)
43079
0C06h
Monitor area detail (the 61th word) (1)
43121
0C30h
Monitor area detail (the 40th word) (2)
43080
0C07h
Monitor area detail (the 61th word) (2)
43122
0C31h
Monitor area detail (the 41th word) (1)
43081
0C08h
Monitor area detail (the 62th word) (1)
43123
0C32h
Monitor area detail (the 41th word) (2)
43082
0C09h
Monitor area detail (the 62th word) (2)
43124
0C33h
Monitor area detail (the 42th word) (1)
43083
0C0Ah
Monitor area detail (the 63th word) (1)
43125
0C34h
Monitor area detail (the 42th word) (2)
43084
0C0Bh
Monitor area detail (the 63th word) (2)
43126
0C35h
Monitor area detail (the 43th word) (1)
43085
0C0Ch
Monitor area detail (the 64th word) (1)
43127
0C36h
Monitor area detail (the 43th word) (2)
43086
0C0Dh
Monitor area detail (the 64th word) (2)
43128
0C37h
Monitor area detail (the 44th word) (1)
43087
0C0Eh
Monitor area detail (the 65th word) (1)
43129
0C38h
Monitor area detail (the 44th word) (2)
43088
0C0Fh
Monitor area detail (the 65th word) (2)
43130
0C39h
Monitor area detail (the 45th word) (1)
43089
0C10h
Monitor area detail (the 66th word) (1)
43131
0C3Ah
Monitor area detail (the 45th word) (2)
43090
0C11h
Monitor area detail (the 66th word) (2)
43132
0C3Bh
Monitor area detail (the 46th word) (1)
43091
0C12h
Monitor area detail (the 67th word) (1)
43133
0C3Ch
Monitor area detail (the 46th word) (2)
43092
0C13h
Monitor area detail (the 67th word) (2)
43134
0C3Dh
Monitor area detail (the 47th word) (1)
43093
0C14h
Monitor area detail (the 68th word) (1)
43135
0C3Eh
Monitor area detail (the 47th word) (2)
43094
0C15h
Monitor area detail (the 68th word) (2)
43136
0C3Fh
Monitor area detail (the 48th word) (1)
43095
0C16h
Monitor area detail (the 69th word) (1)
43137
0C40h
Monitor area detail (the 48th word) (2)
43096
0C17h
Monitor area detail (the 69th word) (2)
43138
0C41h
Monitor area detail (the 49th word) (1)
43097
0C18h
Monitor area detail (the 70th word) (1)
43139
0C42h
Monitor area detail (the 49th word) (2)
43098
0C19h
Monitor area detail (the 70th word) (2)
43140
0C43h
Monitor area detail (the 50th word) (1)
43099
0C1Ah
Monitor area detail (the 71th word) (1)
43141
0C44h
Monitor area detail (the 50th word) (2)
43100
0C1Bh
Monitor area detail (the 71th word) (2)
43142
0C45h
Monitor area detail (the 51th word) (1)
43101
0C1Ch
Monitor area detail (the 72th word) (1)
43143
0C46h
Monitor area detail (the 51th word) (2)
43102
0C1Dh
Monitor area detail (the 72th word) (2)
43144
0C47h
Monitor area detail (the 52th word) (1)
43103
0C1Eh
Monitor area detail (the 73th word) (1)
43145
0C48h
Monitor area detail (the 52th word) (2)
43104
0C1Fh
Monitor area detail (the 73th word) (2)
43146
0C49h
Monitor area detail (the 53th word) (1)
43105
0C20h
Monitor area detail (the 74th word) (1)
43147
0C4Ah
Monitor area detail (the 53th word) (2)
43106
0C21h
Monitor area detail (the 74th word) (2)
43148
0C4Bh
INP-TN5A2052-E
31
Contents
5-35
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 75th word) (1)
43149
0C4Ch
Monitor area detail (the 75th word) (2)
43150
Monitor area detail (the 76th word) (1)
Monitor area detail (the 76th word) (2)
Register
Relative
No.
address
Monitor area detail (the 96th word) (1)
43191
0C76h
0C4Dh
Monitor area detail (the 96th word) (2)
43192
0C77h
43151
0C4Eh
Monitor area detail (the 97th word) (1)
43193
0C78h
43152
0C4Fh
Monitor area detail (the 97th word) (2)
43194
0C79h
Monitor area detail (the 77th word) (1)
43153
0C50h
Monitor area detail (the 98th word) (1)
43195
0C7Ah
Monitor area detail (the 77th word) (2)
43154
0C51h
Monitor area detail (the 98th word) (2)
43196
0C7Bh
Monitor area detail (the 78th word) (1)
43155
0C52h
Monitor area detail (the 99th word) (1)
43197
0C7Ch
Monitor area detail (the 78th word) (2)
43156
0C53h
Monitor area detail (the 99th word) (2)
43198
0C7Dh
Monitor area detail (the 79th word) (1)
43157
0C54h
Monitor area detail (the 100th word) (1)
43199
0C7Eh
Monitor area detail (the 79th word) (2)
43158
0C55h
Monitor area detail (the 100th word) (2)
43200
0C7Fh
Monitor area detail (the 80th word) (1)
43159
0C56h
Monitor area detail (the 101th word) (1)
43201
0C80h
Monitor area detail (the 80th word) (2)
43160
0C57h
Monitor area detail (the 101th word) (2)
43202
0C81h
Monitor area detail (the 81th word) (1)
43161
0C58h
Monitor area detail (the 102th word) (1)
43203
0C82h
Monitor area detail (the 81th word) (2)
43162
0C59h
Monitor area detail (the 102th word) (2)
43204
0C83h
Monitor area detail (the 82th word) (1)
43163
0C5Ah
Monitor area detail (the 103th word) (1)
43205
0C84h
Monitor area detail (the 82th word) (2)
43164
0C5Bh
Monitor area detail (the 103th word) (2)
43206
0C85h
Monitor area detail (the 83th word) (1)
43165
0C5Ch
Monitor area detail (the 104th word) (1)
43207
0C86h
Monitor area detail (the 83th word) (2)
43166
0C5Dh
Monitor area detail (the 104th word) (2)
43208
0C87h
Monitor area detail (the 84th word) (1)
43167
0C5Eh
Monitor area detail (the 105th word) (1)
43209
0C88h
Monitor area detail (the 84th word) (2)
43168
0C5Fh
Monitor area detail (the 105th word) (2)
43210
0C89h
Monitor area detail (the 85th word) (1)
43169
0C60h
Monitor area detail (the 106th word) (1)
43211
0C8Ah
Monitor area detail (the 85th word) (2)
43170
0C61h
Monitor area detail (the 106th word) (2)
43212
0C8Bh
Monitor area detail (the 86th word) (1)
43171
0C62h
Monitor area detail (the 107th word) (1)
43213
0C8Ch
Monitor area detail (the 86th word) (2)
43172
0C63h
Monitor area detail (the 107th word) (2)
43214
0C8Dh
Monitor area detail (the 87th word) (1)
43173
0C64h
Monitor area detail (the 108th word) (1)
43215
0C8Eh
Monitor area detail (the 87th word) (2)
43174
0C65h
Monitor area detail (the 108th word) (2)
43216
0C8Fh
Monitor area detail (the 88th word) (1)
43175
0C66h
Monitor area detail (the 109th word) (1)
43217
0C90h
Monitor area detail (the 88th word) (2)
43176
0C67h
Monitor area detail (the 109th word) (2)
43218
0C91h
Monitor area detail (the 89th word) (1)
43177
0C68h
Monitor area detail (the 110th word) (1)
43219
0C92h
Monitor area detail (the 89th word) (2)
43178
0C69h
Monitor area detail (the 110th word) (2)
43220
0C93h
Monitor area detail (the 90th word) (1)
43179
0C6Ah
Monitor area detail (the 111th word) (1)
43221
0C94h
Monitor area detail (the 90th word) (2)
43180
0C6Bh
Monitor area detail (the 111th word) (2)
43222
0C95h
Monitor area detail (the 91th word) (1)
43181
0C6Ch
Monitor area detail (the 112th word) (1)
43223
0C96h
Monitor area detail (the 91th word) (2)
43182
0C6Dh
Monitor area detail (the 112th word) (2)
43224
0C97h
Monitor area detail (the 92th word) (1)
43183
0C6Eh
Monitor area detail (the 113th word) (1)
43225
0C98h
Monitor area detail (the 92th word) (2)
43184
0C6Fh
Monitor area detail (the 113th word) (2)
43226
0C99h
Monitor area detail (the 93th word) (1)
43185
0C70h
Monitor area detail (the 114th word) (1)
43227
0C9Ah
Monitor area detail (the 93th word) (2)
43186
0C71h
Monitor area detail (the 114th word) (2)
43228
0C9Bh
Monitor area detail (the 94th word) (1)
43187
0C72h
Monitor area detail (the 115th word) (1)
43229
0C9Ch
Monitor area detail (the 94th word) (2)
43188
0C73h
Monitor area detail (the 115th word) (2)
43230
0C9Dh
Monitor area detail (the 95th word) (1)
43189
0C74h
Monitor area detail (the 116th word) (1)
43231
0C9Eh
Monitor area detail (the 95th word) (2)
43190
0C75h
Monitor area detail (the 116th word) (2)
43232
0C9Fh
5-36
32
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 117th word) (1)
43233
0CA0h
Monitor area detail (the 117th word) (2)
43234
Monitor area detail (the 118th word) (1)
Monitor area detail (the 118th word) (2)
Register
Relative
No.
address
Monitor area detail (the 138th word) (1)
43275
0CCAh
0CA1h
Monitor area detail (the 138th word) (2)
43276
0CCBh
43235
0CA2h
Monitor area detail (the 139th word) (1)
43277
0CCCh
43236
0CA3h
Monitor area detail (the 139th word) (2)
43278
0CCDh
Monitor area detail (the 119th word) (1)
43237
0CA4h
Monitor area detail (the 140th word) (1)
43279
0CCEh
Monitor area detail (the 119th word) (2)
43238
0CA5h
Monitor area detail (the 140th word) (2)
43280
0CCFh
Monitor area detail (the 120th word) (1)
43239
0CA6h
Monitor area detail (the 141th word) (1)
43281
0CD0h
Monitor area detail (the 120th word) (2)
43240
0CA7h
Monitor area detail (the 141th word) (2)
43282
0CD1h
Monitor area detail (the 121th word) (1)
43241
0CA8h
Monitor area detail (the 142th word) (1)
43283
0CD2h
Monitor area detail (the 121th word) (2)
43242
0CA9h
Monitor area detail (the 142th word) (2)
43284
0CD3h
Monitor area detail (the 122th word) (1)
43243
0CAAh
Monitor area detail (the 143th word) (1)
43285
0CD4h
Monitor area detail (the 122th word) (2)
43244
0CABh
Monitor area detail (the 143th word) (2)
43286
0CD5h
Monitor area detail (the 123th word) (1)
43245
0CACh
Monitor area detail (the 144th word) (1)
43287
0CD6h
Monitor area detail (the 123th word) (2)
43246
0CADh
Monitor area detail (the 144th word) (2)
43288
0CD7h
Monitor area detail (the 124th word) (1)
43247
0CAEh
Monitor area detail (the 145th word) (1)
43289
0CD8h
Monitor area detail (the 124th word) (2)
43248
0CAFh
Monitor area detail (the 145th word) (2)
43290
0CD9h
Monitor area detail (the 125th word) (1)
43249
0CB0h
Monitor area detail (the 146th word) (1)
43291
0CDAh
Monitor area detail (the 125th word) (2)
43250
0CB1h
Monitor area detail (the 146th word) (2)
43292
0CDBh
Monitor area detail (the 126th word) (1)
43251
0CB2h
Monitor area detail (the 147th word) (1)
43293
0CDCh
Monitor area detail (the 126th word) (2)
43252
0CB3h
Monitor area detail (the 147th word) (2)
43294
0CDDh
Monitor area detail (the 127th word) (1)
43253
0CB4h
Monitor area detail (the 148th word) (1)
43295
0CDEh
Monitor area detail (the 127th word) (2)
43254
0CB5h
Monitor area detail (the 148th word) (2)
43296
0CDFh
Monitor area detail (the 128th word) (1)
43255
0CB6h
Monitor area detail (the 149th word) (1)
43297
0CE0h
Monitor area detail (the 128th word) (2)
43256
0CB7h
Monitor area detail (the 149th word) (2)
43298
0CE1h
Monitor area detail (the 129th word) (1)
43257
0CB8h
Monitor area detail (the 150th word) (1)
43299
0CE2h
Monitor area detail (the 129th word) (2)
43258
0CB9h
Monitor area detail (the 150th word) (2)
43300
0CE3h
Monitor area detail (the 130th word) (1)
43259
0CBAh
Monitor area detail (the 151th word) (1)
43301
0CE4h
Monitor area detail (the 130th word) (2)
43260
0CBBh
Monitor area detail (the 151th word) (2)
43302
0CE5h
Monitor area detail (the 131th word) (1)
43261
0CBCh
Monitor area detail (the 152th word) (1)
43303
0CE6h
Monitor area detail (the 131th word) (2)
43262
0CBDh
Monitor area detail (the 152th word) (2)
43304
0CE7h
Monitor area detail (the 132th word) (1)
43263
0CBEh
Monitor area detail (the 153th word) (1)
43305
0CE8h
Monitor area detail (the 132th word) (2)
43264
0CBFh
Monitor area detail (the 153th word) (2)
43306
0CE9h
Monitor area detail (the 133th word) (1)
43265
0CC0h
Monitor area detail (the 154th word) (1)
43307
0CEAh
Monitor area detail (the 133th word) (2)
43266
0CC1h
Monitor area detail (the 154th word) (2)
43308
0CEBh
Monitor area detail (the 134th word) (1)
43267
0CC2h
Monitor area detail (the 155th word) (1)
43309
0CECh
Monitor area detail (the 134th word) (2)
43268
0CC3h
Monitor area detail (the 155th word) (2)
43310
0CEDh
Monitor area detail (the 135th word) (1)
43269
0CC4h
Monitor area detail (the 156th word) (1)
43311
0CEEh
Monitor area detail (the 135th word) (2)
43270
0CC5h
Monitor area detail (the 156th word) (2)
43312
0CEFh
Monitor area detail (the 136th word) (1)
43271
0CC6h
Monitor area detail (the 157th word) (1)
43313
0CF0h
Monitor area detail (the 136th word) (2)
43272
0CC7h
Monitor area detail (the 157th word) (2)
43314
0CF1h
Monitor area detail (the 137th word) (1)
43273
0CC8h
Monitor area detail (the 158th word) (1)
43315
0CF2h
Monitor area detail (the 137th word) (2)
43274
0CC9h
Monitor area detail (the 158th word) (2)
43316
0CF3h
INP-TN5A2052-E
33
Contents
5-37
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 159th word) (1)
43317
0CF4h
Monitor area detail (the 159th word) (2)
43318
Monitor area detail (the 160th word) (1)
Monitor area detail (the 160th word) (2)
Register
Relative
No.
address
Monitor area detail (the 180th word) (1)
43359
0D1Eh
0CF5h
Monitor area detail (the 180th word) (2)
43360
0D1Fh
43319
0CF6h
Monitor area detail (the 181th word) (1)
43361
0D20h
43320
0CF7h
Monitor area detail (the 181th word) (2)
43362
0D21h
Monitor area detail (the 161th word) (1)
43321
0CF8h
Monitor area detail (the 182th word) (1)
43363
0D22h
Monitor area detail (the 161th word) (2)
43322
0CF9h
Monitor area detail (the 182th word) (2)
43364
0D23h
Monitor area detail (the 162th word) (1)
43323
0CFAh
Monitor area detail (the 183th word) (1)
43365
0D24h
Monitor area detail (the 162th word) (2)
43324
0CFBh
Monitor area detail (the 183th word) (2)
43366
0D25h
Monitor area detail (the 163th word) (1)
43325
0CFCh
Monitor area detail (the 184th word) (1)
43367
0D26h
Monitor area detail (the 163th word) (2)
43326
0CFDh
Monitor area detail (the 184th word) (2)
43368
0D27h
Monitor area detail (the 164th word) (1)
43327
0CFEh
Monitor area detail (the 185th word) (1)
43369
0D28h
Monitor area detail (the 164th word) (2)
43328
0CFFh
Monitor area detail (the 185th word) (2)
43370
0D29h
Monitor area detail (the 165th word) (1)
43329
0D00h
Monitor area detail (the 186th word) (1)
43371
0D2Ah
Monitor area detail (the 165th word) (2)
43330
0D01h
Monitor area detail (the 186th word) (2)
43372
0D2Bh
Monitor area detail (the 166th word) (1)
43331
0D02h
Monitor area detail (the 187th word) (1)
43373
0D2Ch
Monitor area detail (the 166th word) (2)
43332
0D03h
Monitor area detail (the 187th word) (2)
43374
0D2Dh
Monitor area detail (the 167th word) (1)
43333
0D04h
Monitor area detail (the 188th word) (1)
43375
0D2Eh
Monitor area detail (the 167th word) (2)
43334
0D05h
Monitor area detail (the 188th word) (2)
43376
0D2Fh
Monitor area detail (the 168th word) (1)
43335
0D06h
Monitor area detail (the 189th word) (1)
43377
0D30h
Monitor area detail (the 168th word) (2)
43336
0D07h
Monitor area detail (the 189th word) (2)
43378
0D31h
Monitor area detail (the 169th word) (1)
43337
0D08h
Monitor area detail (the 190th word) (1)
43379
0D32h
Monitor area detail (the 169th word) (2)
43338
0D09h
Monitor area detail (the 190th word) (2)
43380
0D33h
Monitor area detail (the 170th word) (1)
43339
0D0Ah
Monitor area detail (the 191th word) (1)
43381
0D34h
Monitor area detail (the 170th word) (2)
43340
0D0Bh
Monitor area detail (the 191th word) (2)
43382
0D35h
Monitor area detail (the 171th word) (1)
43341
0D0Ch
Monitor area detail (the 192th word) (1)
43383
0D36h
Monitor area detail (the 171th word) (2)
43342
0D0Dh
Monitor area detail (the 192th word) (2)
43384
0D37h
Monitor area detail (the 172th word) (1)
43343
0D0Eh
Monitor area detail (the 193th word) (1)
43385
0D38h
Monitor area detail (the 172th word) (2)
43344
0D0Fh
Monitor area detail (the 193th word) (2)
43386
0D39h
Monitor area detail (the 173th word) (1)
43345
0D10h
Monitor area detail (the 194th word) (1)
43387
0D3Ah
Monitor area detail (the 173th word) (2)
43346
0D11h
Monitor area detail (the 194th word) (2)
43388
0D3Bh
Monitor area detail (the 174th word) (1)
43347
0D12h
Monitor area detail (the 195th word) (1)
43389
0D3Ch
Monitor area detail (the 174th word) (2)
43348
0D13h
Monitor area detail (the 195th word) (2)
43390
0D3Dh
Monitor area detail (the 175th word) (1)
43349
0D14h
Monitor area detail (the 196th word) (1)
43391
0D3Eh
Monitor area detail (the 175th word) (2)
43350
0D15h
Monitor area detail (the 196th word) (2)
43392
0D3Fh
Monitor area detail (the 176th word) (1)
43351
0D16h
Monitor area detail (the 197th word) (1)
43393
0D40h
Monitor area detail (the 176th word) (2)
43352
0D17h
Monitor area detail (the 197th word) (2)
43394
0D41h
Monitor area detail (the 177th word) (1)
43353
0D18h
Monitor area detail (the 198th word) (1)
43395
0D42h
Monitor area detail (the 177th word) (2)
43354
0D19h
Monitor area detail (the 198th word) (2)
43396
0D43h
Monitor area detail (the 178th word) (1)
43355
0D1Ah
Monitor area detail (the 199th word) (1)
43397
0D44h
Monitor area detail (the 178th word) (2)
43356
0D1Bh
Monitor area detail (the 199th word) (2)
43398
0D45h
Monitor area detail (the 179th word) (1)
43357
0D1Ch
Monitor area detail (the 200th word) (1)
43399
0D46h
Monitor area detail (the 179th word) (2)
43358
0D1Dh
Monitor area detail (the 200th word) (2)
43400
0D47h
5-38
34
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 201th word) (1)
43401
0D48h
Monitor area detail (the 201th word) (2)
43402
Monitor area detail (the 202th word) (1)
Monitor area detail (the 202th word) (2)
Register
Relative
No.
address
Monitor area detail (the 222th word) (1)
43443
0D72h
0D49h
Monitor area detail (the 222th word) (2)
43444
0D73h
43403
0D4Ah
Monitor area detail (the 223th word) (1)
43445
0D74h
43404
0D4Bh
Monitor area detail (the 223th word) (2)
43446
0D75h
Monitor area detail (the 203th word) (1)
43405
0D4Ch
Monitor area detail (the 224th word) (1)
43447
0D76h
Monitor area detail (the 203th word) (2)
43406
0D4Dh
Monitor area detail (the 224th word) (2)
43448
0D77h
Monitor area detail (the 204th word) (1)
43407
0D4Eh
Monitor area detail (the 225th word) (1)
43449
0D78h
Monitor area detail (the 204th word) (2)
43408
0D4Fh
Monitor area detail (the 225th word) (2)
43450
0D79h
Monitor area detail (the 205th word) (1)
43409
0D50h
Monitor area detail (the 226th word) (1)
43451
0D7Ah
Monitor area detail (the 205th word) (2)
43410
0D51h
Monitor area detail (the 226th word) (2)
43452
0D7Bh
Monitor area detail (the 206th word) (1)
43411
0D52h
Monitor area detail (the 227th word) (1)
43453
0D7Ch
Monitor area detail (the 206th word) (2)
43412
0D53h
Monitor area detail (the 227th word) (2)
43454
0D7Dh
Monitor area detail (the 207th word) (1)
43413
0D54h
Monitor area detail (the 228th word) (1)
43455
0D7Eh
Monitor area detail (the 207th word) (2)
43414
0D55h
Monitor area detail (the 228th word) (2)
43456
0D7Fh
Monitor area detail (the 208th word) (1)
43415
0D56h
Monitor area detail (the 229th word) (1)
43457
0D80h
Monitor area detail (the 208th word) (2)
43416
0D57h
Monitor area detail (the 229th word) (2)
43458
0D81h
Monitor area detail (the 209th word) (1)
43417
0D58h
Monitor area detail (the 230th word) (1)
43459
0D82h
Monitor area detail (the 209th word) (2)
43418
0D59h
Monitor area detail (the 230th word) (2)
43460
0D83h
Monitor area detail (the 210th word) (1)
43419
0D5Ah
Monitor area detail (the 231th word) (1)
43461
0D84h
Monitor area detail (the 210th word) (2)
43420
0D5Bh
Monitor area detail (the 231th word) (2)
43462
0D85h
Monitor area detail (the 211th word) (1)
43421
0D5Ch
Monitor area detail (the 232th word) (1)
43463
0D86h
Monitor area detail (the 211th word) (2)
43422
0D5Dh
Monitor area detail (the 232th word) (2)
43464
0D87h
Monitor area detail (the 212th word) (1)
43423
0D5Eh
Monitor area detail (the 233th word) (1)
43465
0D88h
Monitor area detail (the 212th word) (2)
43424
0D5Fh
Monitor area detail (the 233th word) (2)
43466
0D89h
Monitor area detail (the 213th word) (1)
43425
0D60h
Monitor area detail (the 234th word) (1)
43467
0D8Ah
Monitor area detail (the 213th word) (2)
43426
0D61h
Monitor area detail (the 234th word) (2)
43468
0D8Bh
Monitor area detail (the 214th word) (1)
43427
0D62h
Monitor area detail (the 235th word) (1)
43469
0D8Ch
Monitor area detail (the 214th word) (2)
43428
0D63h
Monitor area detail (the 235th word) (2)
43470
0D8Dh
Monitor area detail (the 215th word) (1)
43429
0D64h
Monitor area detail (the 236th word) (1)
43471
0D8Eh
Monitor area detail (the 215th word) (2)
43430
0D65h
Monitor area detail (the 236th word) (2)
43472
0D8Fh
Monitor area detail (the 216th word) (1)
43431
0D66h
Monitor area detail (the 237th word) (1)
43473
0D90h
Monitor area detail (the 216th word) (2)
43432
0D67h
Monitor area detail (the 237th word) (2)
43474
0D91h
Monitor area detail (the 217th word) (1)
43433
0D68h
Monitor area detail (the 238th word) (1)
43475
0D92h
Monitor area detail (the 217th word) (2)
43434
0D69h
Monitor area detail (the 238th word) (2)
43476
0D93h
Monitor area detail (the 218th word) (1)
43435
0D6Ah
Monitor area detail (the 239th word) (1)
43477
0D94h
Monitor area detail (the 218th word) (2)
43436
0D6Bh
Monitor area detail (the 239th word) (2)
43478
0D95h
Monitor area detail (the 219th word) (1)
43437
0D6Ch
Monitor area detail (the 240th word) (1)
43479
0D96h
Monitor area detail (the 219th word) (2)
43438
0D6Dh
Monitor area detail (the 240th word) (2)
43480
0D97h
Monitor area detail (the 220th word) (1)
43439
0D6Eh
Monitor area detail (the 241th word) (1)
43481
0D98h
Monitor area detail (the 220th word) (2)
43440
0D6Fh
Monitor area detail (the 241th word) (2)
43482
0D99h
Monitor area detail (the 221th word) (1)
43441
0D70h
Monitor area detail (the 242th word) (1)
43483
0D9Ah
Monitor area detail (the 221th word) (2)
43442
0D71h
Monitor area detail (the 242th word) (2)
43484
0D9Bh
INP-TN5A2052-E
35
Contents
5-39
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 243th word) (1)
43485
0D9Ch
Monitor area detail (the 243th word) (2)
43486
Monitor area detail (the 244th word) (1)
Monitor area detail (the 244th word) (2)
Register
Relative
No.
address
Monitor area detail (the 264th word) (1)
43527
0DC6h
0D9Dh
Monitor area detail (the 264th word) (2)
43528
0DC7h
43487
0D9Eh
Monitor area detail (the 265th word) (1)
43529
0DC8h
43488
0D9Fh
Monitor area detail (the 265th word) (2)
43530
0DC9h
Monitor area detail (the 245th word) (1)
43489
0DA0h
Monitor area detail (the 266th word) (1)
43531
0DCAh
Monitor area detail (the 245th word) (2)
43490
0DA1h
Monitor area detail (the 266th word) (2)
43532
0DCBh
Monitor area detail (the 246th word) (1)
43491
0DA2h
Monitor area detail (the 267th word) (1)
43533
0DCCh
Monitor area detail (the 246th word) (2)
43492
0DA3h
Monitor area detail (the 267th word) (2)
43534
0DCDh
Monitor area detail (the 247th word) (1)
43493
0DA4h
Monitor area detail (the 268th word) (1)
43535
0DCEh
Monitor area detail (the 247th word) (2)
43494
0DA5h
Monitor area detail (the 268th word) (2)
43536
0DCFh
Monitor area detail (the 248th word) (1)
43495
0DA6h
Monitor area detail (the 269th word) (1)
43537
0DD0h
Monitor area detail (the 248th word) (2)
43496
0DA7h
Monitor area detail (the 269th word) (2)
43538
0DD1h
Monitor area detail (the 249th word) (1)
43497
0DA8h
Monitor area detail (the 270th word) (1)
43539
0DD2h
Monitor area detail (the 249th word) (2)
43498
0DA9h
Monitor area detail (the 270th word) (2)
43540
0DD3h
Monitor area detail (the 250th word) (1)
43499
0DAAh
Monitor area detail (the 271th word) (1)
43541
0DD4h
Monitor area detail (the 250th word) (2)
43500
0DABh
Monitor area detail (the 271th word) (2)
43542
0DD5h
Monitor area detail (the 251th word) (1)
43501
0DACh
Monitor area detail (the 272th word) (1)
43543
0DD6h
Monitor area detail (the 251th word) (2)
43502
0DADh
Monitor area detail (the 272th word) (2)
43544
0DD7h
Monitor area detail (the 252th word) (1)
43503
0DAEh
Monitor area detail (the 273th word) (1)
43545
0DD8h
Monitor area detail (the 252th word) (2)
43504
0DAFh
Monitor area detail (the 273th word) (2)
43546
0DD9h
Monitor area detail (the 253th word) (1)
43505
0DB0h
Monitor area detail (the 274th word) (1)
43547
0DDAh
Monitor area detail (the 253th word) (2)
43506
0DB1h
Monitor area detail (the 274th word) (2)
43548
0DDBh
Monitor area detail (the 254th word) (1)
43507
0DB2h
Monitor area detail (the 275th word) (1)
43549
0DDCh
Monitor area detail (the 254th word) (2)
43508
0DB3h
Monitor area detail (the 275th word) (2)
43550
0DDDh
Monitor area detail (the 255th word) (1)
43509
0DB4h
Monitor area detail (the 276th word) (1)
43551
0DDEh
Monitor area detail (the 255th word) (2)
43510
0DB5h
Monitor area detail (the 276th word) (2)
43552
0DDFh
Monitor area detail (the 256th word) (1)
43511
0DB6h
Monitor area detail (the 277th word) (1)
43553
0DE0h
Monitor area detail (the 256th word) (2)
43512
0DB7h
Monitor area detail (the 277th word) (2)
43554
0DE1h
Monitor area detail (the 257th word) (1)
43513
0DB8h
Monitor area detail (the 278th word) (1)
43555
0DE2h
Monitor area detail (the 257th word) (2)
43514
0DB9h
Monitor area detail (the 278th word) (2)
43556
0DE3h
Monitor area detail (the 258th word) (1)
43515
0DBAh
Monitor area detail (the 279th word) (1)
43557
0DE4h
Monitor area detail (the 258th word) (2)
43516
0DBBh
Monitor area detail (the 279th word) (2)
43558
0DE5h
Monitor area detail (the 259th word) (1)
43517
0DBCh
Monitor area detail (the 280th word) (1)
43559
0DE6h
Monitor area detail (the 259th word) (2)
43518
0DBDh
Monitor area detail (the 280th word) (2)
43560
0DE7h
Monitor area detail (the 260th word) (1)
43519
0DBEh
Monitor area detail (the 281th word) (1)
43561
0DE8h
Monitor area detail (the 260th word) (2)
43520
0DBFh
Monitor area detail (the 281th word) (2)
43562
0DE9h
Monitor area detail (the 261th word) (1)
43521
0DC0h
Monitor area detail (the 282th word) (1)
43563
0DEAh
Monitor area detail (the 261th word) (2)
43522
0DC1h
Monitor area detail (the 282th word) (2)
43564
0DEBh
Monitor area detail (the 262th word) (1)
43523
0DC2h
Monitor area detail (the 283th word) (1)
43565
0DECh
Monitor area detail (the 262th word) (2)
43524
0DC3h
Monitor area detail (the 283th word) (2)
43566
0DEDh
Monitor area detail (the 263th word) (1)
43525
0DC4h
Monitor area detail (the 284th word) (1)
43567
0DEEh
Monitor area detail (the 263th word) (2)
43526
0DC5h
Monitor area detail (the 284th word) (2)
43568
0DEFh
5-40
36
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 285th word) (1)
43569
0DF0h
Monitor area detail (the 285th word) (2)
43570
Monitor area detail (the 286th word) (1)
Monitor area detail (the 286th word) (2)
Register
Relative
No.
address
Monitor area detail (the 306th word) (1)
43611
0E1Ah
0DF1h
Monitor area detail (the 306th word) (2)
43612
0E1Bh
43571
0DF2h
Monitor area detail (the 307th word) (1)
43613
0E1Ch
43572
0DF3h
Monitor area detail (the 307th word) (2)
43614
0E1Dh
Monitor area detail (the 287th word) (1)
43573
0DF4h
Monitor area detail (the 308th word) (1)
43615
0E1Eh
Monitor area detail (the 287th word) (2)
43574
0DF5h
Monitor area detail (the 308th word) (2)
43616
0E1Fh
Monitor area detail (the 288th word) (1)
43575
0DF6h
Monitor area detail (the 309th word) (1)
43617
0E20h
Monitor area detail (the 288th word) (2)
43576
0DF7h
Monitor area detail (the 309th word) (2)
43618
0E21h
Monitor area detail (the 289th word) (1)
43577
0DF8h
Monitor area detail (the 310th word) (1)
43619
0E22h
Monitor area detail (the 289th word) (2)
43578
0DF9h
Monitor area detail (the 310th word) (2)
43620
0E23h
Monitor area detail (the 290th word) (1)
43579
0DFAh
Monitor area detail (the 311th word) (1)
43621
0E24h
Monitor area detail (the 290th word) (2)
43580
0DFBh
Monitor area detail (the 311th word) (2)
43622
0E25h
Monitor area detail (the 291th word) (1)
43581
0DFCh
Monitor area detail (the 312th word) (1)
43623
0E26h
Monitor area detail (the 291th word) (2)
43582
0DFDh
Monitor area detail (the 312th word) (2)
43624
0E27h
Monitor area detail (the 292th word) (1)
43583
0DFEh
Monitor area detail (the 313th word) (1)
43625
0E28h
Monitor area detail (the 292th word) (2)
43584
0DFFh
Monitor area detail (the 313th word) (2)
43626
0E29h
Monitor area detail (the 293th word) (1)
43585
0E00h
Monitor area detail (the 314th word) (1)
43627
0E2Ah
Monitor area detail (the 293th word) (2)
43586
0E01h
Monitor area detail (the 314th word) (2)
43628
0E2Bh
Monitor area detail (the 294th word) (1)
43587
0E02h
Monitor area detail (the 315th word) (1)
43629
0E2Ch
Monitor area detail (the 294th word) (2)
43588
0E03h
Monitor area detail (the 315th word) (2)
43630
0E2Dh
Monitor area detail (the 295th word) (1)
43589
0E04h
Monitor area detail (the 316th word) (1)
43631
0E2Eh
Monitor area detail (the 295th word) (2)
43590
0E05h
Monitor area detail (the 316th word) (2)
43632
0E2Fh
Monitor area detail (the 296th word) (1)
43591
0E06h
Monitor area detail (the 317th word) (1)
43633
0E30h
Monitor area detail (the 296th word) (2)
43592
0E07h
Monitor area detail (the 317th word) (2)
43634
0E31h
Monitor area detail (the 297th word) (1)
43593
0E08h
Monitor area detail (the 318th word) (1)
43635
0E32h
Monitor area detail (the 297th word) (2)
43594
0E09h
Monitor area detail (the 318th word) (2)
43636
0E33h
Monitor area detail (the 298th word) (1)
43595
0E0Ah
Monitor area detail (the 319th word) (1)
43637
0E34h
Monitor area detail (the 298th word) (2)
43596
0E0Bh
Monitor area detail (the 319th word) (2)
43638
0E35h
Monitor area detail (the 299th word) (1)
43597
0E0Ch
Monitor area detail (the 320th word) (1)
43639
0E36h
Monitor area detail (the 299th word) (2)
43598
0E0Dh
Monitor area detail (the 320th word) (2)
43640
0E37h
Monitor area detail (the 300th word) (1)
43599
0E0Eh
Monitor area detail (the 321th word) (1)
43641
0E38h
Monitor area detail (the 300th word) (2)
43600
0E0Fh
Monitor area detail (the 321th word) (2)
43642
0E39h
Monitor area detail (the 301th word) (1)
43601
0E10h
Monitor area detail (the 322th word) (1)
43643
0E3Ah
Monitor area detail (the 301th word) (2)
43602
0E11h
Monitor area detail (the 322th word) (2)
43644
0E3Bh
Monitor area detail (the 302th word) (1)
43603
0E12h
Monitor area detail (the 323th word) (1)
43645
0E3Ch
Monitor area detail (the 302th word) (2)
43604
0E13h
Monitor area detail (the 323th word) (2)
43646
0E3Dh
Monitor area detail (the 303th word) (1)
43605
0E14h
Monitor area detail (the 324th word) (1)
43647
0E3Eh
Monitor area detail (the 303th word) (2)
43606
0E15h
Monitor area detail (the 324th word) (2)
43648
0E3Fh
Monitor area detail (the 304th word) (1)
43607
0E16h
Monitor area detail (the 325th word) (1)
43649
0E40h
Monitor area detail (the 304th word) (2)
43608
0E17h
Monitor area detail (the 325th word) (2)
43650
0E41h
Monitor area detail (the 305th word) (1)
43609
0E18h
Monitor area detail (the 326th word) (1)
43651
0E42h
Monitor area detail (the 305th word) (2)
43610
0E19h
Monitor area detail (the 326th word) (2)
43652
0E43h
INP-TN5A2052-E
37
Contents
5-41
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 327th word) (1)
43653
0E44h
Monitor area detail (the 327th word) (2)
43654
Monitor area detail (the 328th word) (1)
Monitor area detail (the 328th word) (2)
Register
Relative
No.
address
Monitor area detail (the 348th word) (1)
43695
0E6Eh
0E45h
Monitor area detail (the 348th word) (2)
43696
0E6Fh
43655
0E46h
Monitor area detail (the 349th word) (1)
43697
0E70h
43656
0E47h
Monitor area detail (the 349th word) (2)
43698
0E71h
Monitor area detail (the 329th word) (1)
43657
0E48h
Monitor area detail (the 350th word) (1)
43699
0E72h
Monitor area detail (the 329th word) (2)
43658
0E49h
Monitor area detail (the 350th word) (2)
43700
0E73h
Monitor area detail (the 330th word) (1)
43659
0E4Ah
Monitor area detail (the 351th word) (1)
43701
0E74h
Monitor area detail (the 330th word) (2)
43660
0E4Bh
Monitor area detail (the 351th word) (2)
43702
0E75h
Monitor area detail (the 331th word) (1)
43661
0E4Ch
Monitor area detail (the 352th word) (1)
43703
0E76h
Monitor area detail (the 331th word) (2)
43662
0E4Dh
Monitor area detail (the 352th word) (2)
43704
0E77h
Monitor area detail (the 332th word) (1)
43663
0E4Eh
Monitor area detail (the 353th word) (1)
43705
0E78h
Monitor area detail (the 332th word) (2)
43664
0E4Fh
Monitor area detail (the 353th word) (2)
43706
0E79h
Monitor area detail (the 333th word) (1)
43665
0E50h
Monitor area detail (the 354th word) (1)
43707
0E7Ah
Monitor area detail (the 333th word) (2)
43666
0E51h
Monitor area detail (the 354th word) (2)
43708
0E7Bh
Monitor area detail (the 334th word) (1)
43667
0E52h
Monitor area detail (the 355th word) (1)
43709
0E7Ch
Monitor area detail (the 334th word) (2)
43668
0E53h
Monitor area detail (the 355th word) (2)
43710
0E7Dh
Monitor area detail (the 335th word) (1)
43669
0E54h
Monitor area detail (the 356th word) (1)
43711
0E7Eh
Monitor area detail (the 335th word) (2)
43670
0E55h
Monitor area detail (the 356th word) (2)
43712
0E7Fh
Monitor area detail (the 336th word) (1)
43671
0E56h
Monitor area detail (the 357th word) (1)
43713
0E80h
Monitor area detail (the 336th word) (2)
43672
0E57h
Monitor area detail (the 357th word) (2)
43714
0E81h
Monitor area detail (the 337th word) (1)
43673
0E58h
Monitor area detail (the 358th word) (1)
43715
0E82h
Monitor area detail (the 337th word) (2)
43674
0E59h
Monitor area detail (the 358th word) (2)
43716
0E83h
Monitor area detail (the 338th word) (1)
43675
0E5Ah
Monitor area detail (the 359th word) (1)
43717
0E84h
Monitor area detail (the 338th word) (2)
43676
0E5Bh
Monitor area detail (the 359th word) (2)
43718
0E85h
Monitor area detail (the 339th word) (1)
43677
0E5Ch
Monitor area detail (the 360th word) (1)
43719
0E86h
Monitor area detail (the 339th word) (2)
43678
0E5Dh
Monitor area detail (the 360th word) (2)
43720
0E87h
Monitor area detail (the 340th word) (1)
43679
0E5Eh
Monitor area detail (the 361th word) (1)
43721
0E88h
Monitor area detail (the 340th word) (2)
43680
0E5Fh
Monitor area detail (the 361th word) (2)
43722
0E89h
Monitor area detail (the 341th word) (1)
43681
0E60h
Monitor area detail (the 362th word) (1)
43723
0E8Ah
Monitor area detail (the 341th word) (2)
43682
0E61h
Monitor area detail (the 362th word) (2)
43724
0E8Bh
Monitor area detail (the 342th word) (1)
43683
0E62h
Monitor area detail (the 363th word) (1)
43725
0E8Ch
Monitor area detail (the 342th word) (2)
43684
0E63h
Monitor area detail (the 363th word) (2)
43726
0E8Dh
Monitor area detail (the 343th word) (1)
43685
0E64h
Monitor area detail (the 364th word) (1)
43727
0E8Eh
Monitor area detail (the 343th word) (2)
43686
0E65h
Monitor area detail (the 364th word) (2)
43728
0E8Fh
Monitor area detail (the 344th word) (1)
43687
0E66h
Monitor area detail (the 365th word) (1)
43729
0E90h
Monitor area detail (the 344th word) (2)
43688
0E67h
Monitor area detail (the 365th word) (2)
43730
0E91h
Monitor area detail (the 345th word) (1)
43689
0E68h
Monitor area detail (the 366th word) (1)
43731
0E92h
Monitor area detail (the 345th word) (2)
43690
0E69h
Monitor area detail (the 366th word) (2)
43732
0E93h
Monitor area detail (the 346th word) (1)
43691
0E6Ah
Monitor area detail (the 367th word) (1)
43733
0E94h
Monitor area detail (the 346th word) (2)
43692
0E6Bh
Monitor area detail (the 367th word) (2)
43734
0E95h
Monitor area detail (the 347th word) (1)
43693
0E6Ch
Monitor area detail (the 368th word) (1)
43735
0E96h
Monitor area detail (the 347th word) (2)
43694
0E6Dh
Monitor area detail (the 368th word) (2)
43736
0E97h
5-42
38
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 369th word) (1)
43737
0E98h
Monitor area detail (the 369th word) (2)
43738
Monitor area detail (the 370th word) (1)
Monitor area detail (the 370th word) (2)
Register
Relative
No.
address
Monitor area detail (the 390th word) (1)
43779
0EC2h
0E99h
Monitor area detail (the 390th word) (2)
43780
0EC3h
43739
0E9Ah
Monitor area detail (the 391th word) (1)
43781
0EC4h
43740
0E9Bh
Monitor area detail (the 391th word) (2)
43782
0EC5h
Monitor area detail (the 371th word) (1)
43741
0E9Ch
Monitor area detail (the 392th word) (1)
43783
0EC6h
Monitor area detail (the 371th word) (2)
43742
0E9Dh
Monitor area detail (the 392th word) (2)
43784
0EC7h
Monitor area detail (the 372th word) (1)
43743
0E9Eh
Monitor area detail (the 393th word) (1)
43785
0EC8h
Monitor area detail (the 372th word) (2)
43744
0E9Fh
Monitor area detail (the 393th word) (2)
43786
0EC9h
Monitor area detail (the 373th word) (1)
43745
0EA0h
Monitor area detail (the 394th word) (1)
43787
0ECAh
Monitor area detail (the 373th word) (2)
43746
0EA1h
Monitor area detail (the 394th word) (2)
43788
0ECBh
Monitor area detail (the 374th word) (1)
43747
0EA2h
Monitor area detail (the 395th word) (1)
43789
0ECCh
Monitor area detail (the 374th word) (2)
43748
0EA3h
Monitor area detail (the 395th word) (2)
43790
0ECDh
Monitor area detail (the 375th word) (1)
43749
0EA4h
Monitor area detail (the 396th word) (1)
43791
0ECEh
Monitor area detail (the 375th word) (2)
43750
0EA5h
Monitor area detail (the 396th word) (2)
43792
0ECFh
Monitor area detail (the 376th word) (1)
43751
0EA6h
Monitor area detail (the 397th word) (1)
43793
0ED0h
Monitor area detail (the 376th word) (2)
43752
0EA7h
Monitor area detail (the 397th word) (2)
43794
0ED1h
Monitor area detail (the 377th word) (1)
43753
0EA8h
Monitor area detail (the 398th word) (1)
43795
0ED2h
Monitor area detail (the 377th word) (2)
43754
0EA9h
Monitor area detail (the 398th word) (2)
43796
0ED3h
Monitor area detail (the 378th word) (1)
43755
0EAAh
Monitor area detail (the 399th word) (1)
43797
0ED4h
Monitor area detail (the 378th word) (2)
43756
0EABh
Monitor area detail (the 399th word) (2)
43798
0ED5h
Monitor area detail (the 379th word) (1)
43757
0EACh
Monitor area detail (the 400th word) (1)
43799
0ED6h
Monitor area detail (the 379th word) (2)
43758
0EADh
Monitor area detail (the 400th word) (2)
43800
0ED7h
Monitor area detail (the 380th word) (1)
43759
0EAEh
Monitor area detail (the 401th word) (1)
43801
0ED8h
Monitor area detail (the 380th word) (2)
43760
0EAFh
Monitor area detail (the 401th word) (2)
43802
0ED9h
Monitor area detail (the 381th word) (1)
43761
0EB0h
Monitor area detail (the 402th word) (1)
43803
0EDAh
Monitor area detail (the 381th word) (2)
43762
0EB1h
Monitor area detail (the 402th word) (2)
43804
0EDBh
Monitor area detail (the 382th word) (1)
43763
0EB2h
Monitor area detail (the 403th word) (1)
43805
0EDCh
Monitor area detail (the 382th word) (2)
43764
0EB3h
Monitor area detail (the 403th word) (2)
43806
0EDDh
Monitor area detail (the 383th word) (1)
43765
0EB4h
Monitor area detail (the 404th word) (1)
43807
0EDEh
Monitor area detail (the 383th word) (2)
43766
0EB5h
Monitor area detail (the 404th word) (2)
43808
0EDFh
Monitor area detail (the 384th word) (1)
43767
0EB6h
Monitor area detail (the 405th word) (1)
43809
0EE0h
Monitor area detail (the 384th word) (2)
43768
0EB7h
Monitor area detail (the 405th word) (2)
43810
0EE1h
Monitor area detail (the 385th word) (1)
43769
0EB8h
Monitor area detail (the 406th word) (1)
43811
0EE2h
Monitor area detail (the 385th word) (2)
43770
0EB9h
Monitor area detail (the 406th word) (2)
43812
0EE3h
Monitor area detail (the 386th word) (1)
43771
0EBAh
Monitor area detail (the 407th word) (1)
43813
0EE4h
Monitor area detail (the 386th word) (2)
43772
0EBBh
Monitor area detail (the 407th word) (2)
43814
0EE5h
Monitor area detail (the 387th word) (1)
43773
0EBCh
Monitor area detail (the 408th word) (1)
43815
0EE6h
Monitor area detail (the 387th word) (2)
43774
0EBDh
Monitor area detail (the 408th word) (2)
43816
0EE7h
Monitor area detail (the 388th word) (1)
43775
0EBEh
Monitor area detail (the 409th word) (1)
43817
0EE8h
Monitor area detail (the 388th word) (2)
43776
0EBFh
Monitor area detail (the 409th word) (2)
43818
0EE9h
Monitor area detail (the 389th word) (1)
43777
0EC0h
Monitor area detail (the 410th word) (1)
43819
0EEAh
Monitor area detail (the 389th word) (2)
43778
0EC1h
Monitor area detail (the 410th word) (2)
43820
0EEBh
INP-TN5A2052-E
39
Contents
5-43
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 411th word) (1)
43821
0EECh
Monitor area detail (the 411th word) (2)
43822
Monitor area detail (the 412th word) (1)
Monitor area detail (the 412th word) (2)
Register
Relative
No.
address
Monitor area detail (the 432th word) (1)
43863
0F16h
0EEDh
Monitor area detail (the 432th word) (2)
43864
0F17h
43823
0EEEh
Monitor area detail (the 433th word) (1)
43865
0F18h
43824
0EEFh
Monitor area detail (the 433th word) (2)
43866
0F19h
Monitor area detail (the 413th word) (1)
43825
0EF0h
Monitor area detail (the 434th word) (1)
43867
0F1Ah
Monitor area detail (the 413th word) (2)
43826
0EF1h
Monitor area detail (the 434th word) (2)
43868
0F1Bh
Monitor area detail (the 414th word) (1)
43827
0EF2h
Monitor area detail (the 435th word) (1)
43869
0F1Ch
Monitor area detail (the 414th word) (2)
43828
0EF3h
Monitor area detail (the 435th word) (2)
43870
0F1Dh
Monitor area detail (the 415th word) (1)
43829
0EF4h
Monitor area detail (the 436th word) (1)
43871
0F1Eh
Monitor area detail (the 415th word) (2)
43830
0EF5h
Monitor area detail (the 436th word) (2)
43872
0F1Fh
Monitor area detail (the 416th word) (1)
43831
0EF6h
Monitor area detail (the 437th word) (1)
43873
0F20h
Monitor area detail (the 416th word) (2)
43832
0EF7h
Monitor area detail (the 437th word) (2)
43874
0F21h
Monitor area detail (the 417th word) (1)
43833
0EF8h
Monitor area detail (the 438th word) (1)
43875
0F22h
Monitor area detail (the 417th word) (2)
43834
0EF9h
Monitor area detail (the 438th word) (2)
43876
0F23h
Monitor area detail (the 418th word) (1)
43835
0EFAh
Monitor area detail (the 439th word) (1)
43877
0F24h
Monitor area detail (the 418th word) (2)
43836
0EFBh
Monitor area detail (the 439th word) (2)
43878
0F25h
Monitor area detail (the 419th word) (1)
43837
0EFCh
Monitor area detail (the 440th word) (1)
43879
0F26h
Monitor area detail (the 419th word) (2)
43838
0EFDh
Monitor area detail (the 440th word) (2)
43880
0F27h
Monitor area detail (the 420th word) (1)
43839
0EFEh
Monitor area detail (the 441th word) (1)
43881
0F28h
Monitor area detail (the 420th word) (2)
43840
0EFFh
Monitor area detail (the 441th word) (2)
43882
0F29h
Monitor area detail (the 421th word) (1)
43841
0F00h
Monitor area detail (the 442th word) (1)
43883
0F2Ah
Monitor area detail (the 421th word) (2)
43842
0F01h
Monitor area detail (the 442th word) (2)
43884
0F2Bh
Monitor area detail (the 422th word) (1)
43843
0F02h
Monitor area detail (the 443th word) (1)
43885
0F2Ch
Monitor area detail (the 422th word) (2)
43844
0F03h
Monitor area detail (the 443th word) (2)
43886
0F2Dh
Monitor area detail (the 423th word) (1)
43845
0F04h
Monitor area detail (the 444th word) (1)
43887
0F2Eh
Monitor area detail (the 423th word) (2)
43846
0F05h
Monitor area detail (the 444th word) (2)
43888
0F2Fh
Monitor area detail (the 424th word) (1)
43847
0F06h
Monitor area detail (the 445th word) (1)
43889
0F30h
Monitor area detail (the 424th word) (2)
43848
0F07h
Monitor area detail (the 445th word) (2)
43890
0F31h
Monitor area detail (the 425th word) (1)
43849
0F08h
Monitor area detail (the 446th word) (1)
43891
0F32h
Monitor area detail (the 425th word) (2)
43850
0F09h
Monitor area detail (the 446th word) (2)
43892
0F33h
Monitor area detail (the 426th word) (1)
43851
0F0Ah
Monitor area detail (the 447th word) (1)
43893
0F34h
Monitor area detail (the 426th word) (2)
43852
0F0Bh
Monitor area detail (the 447th word) (2)
43894
0F35h
Monitor area detail (the 427th word) (1)
43853
0F0Ch
Monitor area detail (the 448th word) (1)
43895
0F36h
Monitor area detail (the 427th word) (2)
43854
0F0Dh
Monitor area detail (the 448th word) (2)
43896
0F37h
Monitor area detail (the 428th word) (1)
43855
0F0Eh
Monitor area detail (the 449th word) (1)
43897
0F38h
Monitor area detail (the 428th word) (2)
43856
0F0Fh
Monitor area detail (the 449th word) (2)
43898
0F39h
Monitor area detail (the 429th word) (1)
43857
0F10h
Monitor area detail (the 450th word) (1)
43899
0F3Ah
Monitor area detail (the 429th word) (2)
43858
0F11h
Monitor area detail (the 450th word) (2)
43900
0F3Bh
Monitor area detail (the 430th word) (1)
43859
0F12h
Monitor area detail (the 451th word) (1)
43901
0F3Ch
Monitor area detail (the 430th word) (2)
43860
0F13h
Monitor area detail (the 451th word) (2)
43902
0F3Dh
Monitor area detail (the 431th word) (1)
43861
0F14h
Monitor area detail (the 452th word) (1)
43903
0F3Eh
Monitor area detail (the 431th word) (2)
43862
0F15h
Monitor area detail (the 452th word) (2)
43904
0F3Fh
5-44
40
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 453th word) (1)
43905
0F40h
Monitor area detail (the 453th word) (2)
43906
Monitor area detail (the 454th word) (1)
Monitor area detail (the 454th word) (2)
Register
Relative
No.
address
Monitor area detail (the 474th word) (1)
43947
0F6Ah
0F41h
Monitor area detail (the 474th word) (2)
43948
0F6Bh
43907
0F42h
Monitor area detail (the 475th word) (1)
43949
0F6Ch
43908
0F43h
Monitor area detail (the 475th word) (2)
43950
0F6Dh
Monitor area detail (the 455th word) (1)
43909
0F44h
Monitor area detail (the 476th word) (1)
43951
0F6Eh
Monitor area detail (the 455th word) (2)
43910
0F45h
Monitor area detail (the 476th word) (2)
43952
0F6Fh
Monitor area detail (the 456th word) (1)
43911
0F46h
Monitor area detail (the 477th word) (1)
43953
0F70h
Monitor area detail (the 456th word) (2)
43912
0F47h
Monitor area detail (the 477th word) (2)
43954
0F71h
Monitor area detail (the 457th word) (1)
43913
0F48h
Monitor area detail (the 478th word) (1)
43955
0F72h
Monitor area detail (the 457th word) (2)
43914
0F49h
Monitor area detail (the 478th word) (2)
43956
0F73h
Monitor area detail (the 458th word) (1)
43915
0F4Ah
Monitor area detail (the 479th word) (1)
43957
0F74h
Monitor area detail (the 458th word) (2)
43916
0F4Bh
Monitor area detail (the 479th word) (2)
43958
0F75h
Monitor area detail (the 459th word) (1)
43917
0F4Ch
Monitor area detail (the 480th word) (1)
43959
0F76h
Monitor area detail (the 459th word) (2)
43918
0F4Dh
Monitor area detail (the 480th word) (2)
43960
0F77h
Monitor area detail (the 460th word) (1)
43919
0F4Eh
Monitor area detail (the 481th word) (1)
43961
0F78h
Monitor area detail (the 460th word) (2)
43920
0F4Fh
Monitor area detail (the 481th word) (2)
43962
0F79h
Monitor area detail (the 461th word) (1)
43921
0F50h
Monitor area detail (the 482th word) (1)
43963
0F7Ah
Monitor area detail (the 461th word) (2)
43922
0F51h
Monitor area detail (the 482th word) (2)
43964
0F7Bh
Monitor area detail (the 462th word) (1)
43923
0F52h
Monitor area detail (the 483th word) (1)
43965
0F7Ch
Monitor area detail (the 462th word) (2)
43924
0F53h
Monitor area detail (the 483th word) (2)
43966
0F7Dh
Monitor area detail (the 463th word) (1)
43925
0F54h
Monitor area detail (the 484th word) (1)
43967
0F7Eh
Monitor area detail (the 463th word) (2)
43926
0F55h
Monitor area detail (the 484th word) (2)
43968
0F7Fh
Monitor area detail (the 464th word) (1)
43927
0F56h
Monitor area detail (the 485th word) (1)
43969
0F80h
Monitor area detail (the 464th word) (2)
43928
0F57h
Monitor area detail (the 485th word) (2)
43970
0F81h
Monitor area detail (the 465th word) (1)
43929
0F58h
Monitor area detail (the 486th word) (1)
43971
0F82h
Monitor area detail (the 465th word) (2)
43930
0F59h
Monitor area detail (the 486th word) (2)
43972
0F83h
Monitor area detail (the 466th word) (1)
43931
0F5Ah
Monitor area detail (the 487th word) (1)
43973
0F84h
Monitor area detail (the 466th word) (2)
43932
0F5Bh
Monitor area detail (the 487th word) (2)
43974
0F85h
Monitor area detail (the 467th word) (1)
43933
0F5Ch
Monitor area detail (the 488th word) (1)
43975
0F86h
Monitor area detail (the 467th word) (2)
43934
0F5Dh
Monitor area detail (the 488th word) (2)
43976
0F87h
Monitor area detail (the 468th word) (1)
43935
0F5Eh
Monitor area detail (the 489th word) (1)
43977
0F88h
Monitor area detail (the 468th word) (2)
43936
0F5Fh
Monitor area detail (the 489th word) (2)
43978
0F89h
Monitor area detail (the 469th word) (1)
43937
0F60h
Monitor area detail (the 490th word) (1)
43979
0F8Ah
Monitor area detail (the 469th word) (2)
43938
0F61h
Monitor area detail (the 490th word) (2)
43980
0F8Bh
Monitor area detail (the 470th word) (1)
43939
0F62h
Monitor area detail (the 491th word) (1)
43981
0F8Ch
Monitor area detail (the 470th word) (2)
43940
0F63h
Monitor area detail (the 491th word) (2)
43982
0F8Dh
Monitor area detail (the 471th word) (1)
43941
0F64h
Monitor area detail (the 492th word) (1)
43983
0F8Eh
Monitor area detail (the 471th word) (2)
43942
0F65h
Monitor area detail (the 492th word) (2)
43984
0F8Fh
Monitor area detail (the 472th word) (1)
43943
0F66h
Monitor area detail (the 493th word) (1)
43985
0F90h
Monitor area detail (the 472th word) (2)
43944
0F67h
Monitor area detail (the 493th word) (2)
43986
0F91h
Monitor area detail (the 473th word) (1)
43945
0F68h
Monitor area detail (the 494th word) (1)
43987
0F92h
Monitor area detail (the 473th word) (2)
43946
0F69h
Monitor area detail (the 494th word) (2)
43988
0F93h
INP-TN5A2052-E
41
Contents
5-45
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 495th word) (1)
43989
0F94h
Monitor area detail (the 495th word) (2)
43990
Monitor area detail (the 496th word) (1)
Monitor area detail (the 496th word) (2)
Register
Relative
No.
address
Monitor area detail (the 516th word) (1)
44031
0FBEh
0F95h
Monitor area detail (the 516th word) (2)
44032
0FBFh
43991
0F96h
Monitor area detail (the 517th word) (1)
44033
0FC0h
43992
0F97h
Monitor area detail (the 517th word) (2)
44034
0FC1h
Monitor area detail (the 497th word) (1)
43993
0F98h
Monitor area detail (the 518th word) (1)
44035
0FC2h
Monitor area detail (the 497th word) (2)
43994
0F99h
Monitor area detail (the 518th word) (2)
44036
0FC3h
Monitor area detail (the 498th word) (1)
43995
0F9Ah
Monitor area detail (the 519th word) (1)
44037
0FC4h
Monitor area detail (the 498th word) (2)
43996
0F9Bh
Monitor area detail (the 519th word) (2)
44038
0FC5h
Monitor area detail (the 499th word) (1)
43997
0F9Ch
Monitor area detail (the 520th word) (1)
44039
0FC6h
Monitor area detail (the 499th word) (2)
43998
0F9Dh
Monitor area detail (the 520th word) (2)
44040
0FC7h
Monitor area detail (the 500th word) (1)
43999
0F9Eh
Monitor area detail (the 521th word) (1)
44041
0FC8h
Monitor area detail (the 500th word) (2)
44000
0F9Fh
Monitor area detail (the 521th word) (2)
44042
0FC9h
Monitor area detail (the 501th word) (1)
44001
0FA0h
Monitor area detail (the 522th word) (1)
44043
0FCAh
Monitor area detail (the 501th word) (2)
44002
0FA1h
Monitor area detail (the 522th word) (2)
44044
0FCBh
Monitor area detail (the 502th word) (1)
44003
0FA2h
Monitor area detail (the 523th word) (1)
44045
0FCCh
Monitor area detail (the 502th word) (2)
44004
0FA3h
Monitor area detail (the 523th word) (2)
44046
0FCDh
Monitor area detail (the 503th word) (1)
44005
0FA4h
Monitor area detail (the 524th word) (1)
44047
0FCEh
Monitor area detail (the 503th word) (2)
44006
0FA5h
Monitor area detail (the 524th word) (2)
44048
0FCFh
Monitor area detail (the 504th word) (1)
44007
0FA6h
Monitor area detail (the 525th word) (1)
44049
0FD0h
Monitor area detail (the 504th word) (2)
44008
0FA7h
Monitor area detail (the 525th word) (2)
44050
0FD1h
Monitor area detail (the 505th word) (1)
44009
0FA8h
Monitor area detail (the 526th word) (1)
44051
0FD2h
Monitor area detail (the 505th word) (2)
44010
0FA9h
Monitor area detail (the 526th word) (2)
44052
0FD3h
Monitor area detail (the 506th word) (1)
44011
0FAAh
Monitor area detail (the 527th word) (1)
44053
0FD4h
Monitor area detail (the 506th word) (2)
44012
0FABh
Monitor area detail (the 527th word) (2)
44054
0FD5h
Monitor area detail (the 507th word) (1)
44013
0FACh
Monitor area detail (the 528th word) (1)
44055
0FD6h
Monitor area detail (the 507th word) (2)
44014
0FADh
Monitor area detail (the 528th word) (2)
44056
0FD7h
Monitor area detail (the 508th word) (1)
44015
0FAEh
Monitor area detail (the 529th word) (1)
44057
0FD8h
Monitor area detail (the 508th word) (2)
44016
0FAFh
Monitor area detail (the 529th word) (2)
44058
0FD9h
Monitor area detail (the 509th word) (1)
44017
0FB0h
Monitor area detail (the 530th word) (1)
44059
0FDAh
Monitor area detail (the 509th word) (2)
44018
0FB1h
Monitor area detail (the 530th word) (2)
44060
0FDBh
Monitor area detail (the 510th word) (1)
44019
0FB2h
Monitor area detail (the 531th word) (1)
44061
0FDCh
Monitor area detail (the 510th word) (2)
44020
0FB3h
Monitor area detail (the 531th word) (2)
44062
0FDDh
Monitor area detail (the 511th word) (1)
44021
0FB4h
Monitor area detail (the 532th word) (1)
44063
0FDEh
Monitor area detail (the 511th word) (2)
44022
0FB5h
Monitor area detail (the 532th word) (2)
44064
0FDFh
Monitor area detail (the 512th word) (1)
44023
0FB6h
Monitor area detail (the 533th word) (1)
44065
0FE0h
Monitor area detail (the 512th word) (2)
44024
0FB7h
Monitor area detail (the 533th word) (2)
44066
0FE1h
Monitor area detail (the 513th word) (1)
44025
0FB8h
Monitor area detail (the 534th word) (1)
44067
0FE2h
Monitor area detail (the 513th word) (2)
44026
0FB9h
Monitor area detail (the 534th word) (2)
44068
0FE3h
Monitor area detail (the 514th word) (1)
44027
0FBAh
Monitor area detail (the 535th word) (1)
44069
0FE4h
Monitor area detail (the 514th word) (2)
44028
0FBBh
Monitor area detail (the 535th word) (2)
44070
0FE5h
Monitor area detail (the 515th word) (1)
44029
0FBCh
Monitor area detail (the 536th word) (1)
44071
0FE6h
Monitor area detail (the 515th word) (2)
44030
0FBDh
Monitor area detail (the 536th word) (2)
44072
0FE7h
5-46
42
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 537th word) (1)
44073
0FE8h
Monitor area detail (the 537th word) (2)
44074
Monitor area detail (the 538th word) (1)
Monitor area detail (the 538th word) (2)
Register
Relative
No.
address
Monitor area detail (the 558th word) (1)
44115
1012h
0FE9h
Monitor area detail (the 558th word) (2)
44116
1013h
44075
0FEAh
Monitor area detail (the 559th word) (1)
44117
1014h
44076
0FEBh
Monitor area detail (the 559th word) (2)
44118
1015h
Monitor area detail (the 539th word) (1)
44077
0FECh
Monitor area detail (the 560th word) (1)
44119
1016h
Monitor area detail (the 539th word) (2)
44078
0FEDh
Monitor area detail (the 560th word) (2)
44120
1017h
Monitor area detail (the 540th word) (1)
44079
0FEEh
Monitor area detail (the 561th word) (1)
44121
1018h
Monitor area detail (the 540th word) (2)
44080
0FEFh
Monitor area detail (the 561th word) (2)
44122
1019h
Monitor area detail (the 541th word) (1)
44081
0FF0h
Monitor area detail (the 562th word) (1)
44123
101Ah
Monitor area detail (the 541th word) (2)
44082
0FF1h
Monitor area detail (the 562th word) (2)
44124
101Bh
Monitor area detail (the 542th word) (1)
44083
0FF2h
Monitor area detail (the 563th word) (1)
44125
101Ch
Monitor area detail (the 542th word) (2)
44084
0FF3h
Monitor area detail (the 563th word) (2)
44126
101Dh
Monitor area detail (the 543th word) (1)
44085
0FF4h
Monitor area detail (the 564th word) (1)
44127
101Eh
Monitor area detail (the 543th word) (2)
44086
0FF5h
Monitor area detail (the 564th word) (2)
44128
101Fh
Monitor area detail (the 544th word) (1)
44087
0FF6h
Monitor area detail (the 565th word) (1)
44129
1020h
Monitor area detail (the 544th word) (2)
44088
0FF7h
Monitor area detail (the 565th word) (2)
44130
1021h
Monitor area detail (the 545th word) (1)
44089
0FF8h
Monitor area detail (the 566th word) (1)
44131
1022h
Monitor area detail (the 545th word) (2)
44090
0FF9h
Monitor area detail (the 566th word) (2)
44132
1023h
Monitor area detail (the 546th word) (1)
44091
0FFAh
Monitor area detail (the 567th word) (1)
44133
1024h
Monitor area detail (the 546th word) (2)
44092
0FFBh
Monitor area detail (the 567th word) (2)
44134
1025h
Monitor area detail (the 547th word) (1)
44093
0FFCh
Monitor area detail (the 568th word) (1)
44135
1026h
Monitor area detail (the 547th word) (2)
44094
0FFDh
Monitor area detail (the 568th word) (2)
44136
1027h
Monitor area detail (the 548th word) (1)
44095
0FFEh
Monitor area detail (the 569th word) (1)
44137
1028h
Monitor area detail (the 548th word) (2)
44096
0FFFh
Monitor area detail (the 569th word) (2)
44138
1029h
Monitor area detail (the 549th word) (1)
44097
1000h
Monitor area detail (the 570th word) (1)
44139
102Ah
Monitor area detail (the 549th word) (2)
44098
1001h
Monitor area detail (the 570th word) (2)
44140
102Bh
Monitor area detail (the 550th word) (1)
44099
1002h
Monitor area detail (the 571th word) (1)
44141
102Ch
Monitor area detail (the 550th word) (2)
44100
1003h
Monitor area detail (the 571th word) (2)
44142
102Dh
Monitor area detail (the 551th word) (1)
44101
1004h
Monitor area detail (the 572th word) (1)
44143
102Eh
Monitor area detail (the 551th word) (2)
44102
1005h
Monitor area detail (the 572th word) (2)
44144
102Fh
Monitor area detail (the 552th word) (1)
44103
1006h
Monitor area detail (the 573th word) (1)
44145
1030h
Monitor area detail (the 552th word) (2)
44104
1007h
Monitor area detail (the 573th word) (2)
44146
1031h
Monitor area detail (the 553th word) (1)
44105
1008h
Monitor area detail (the 574th word) (1)
44147
1032h
Monitor area detail (the 553th word) (2)
44106
1009h
Monitor area detail (the 574th word) (2)
44148
1033h
Monitor area detail (the 554th word) (1)
44107
100Ah
Monitor area detail (the 575th word) (1)
44149
1034h
Monitor area detail (the 554th word) (2)
44108
100Bh
Monitor area detail (the 575th word) (2)
44150
1035h
Monitor area detail (the 555th word) (1)
44109
100Ch
Monitor area detail (the 576th word) (1)
44151
1036h
Monitor area detail (the 555th word) (2)
44110
100Dh
Monitor area detail (the 576th word) (2)
44152
1037h
Monitor area detail (the 556th word) (1)
44111
100Eh
Monitor area detail (the 577th word) (1)
44153
1038h
Monitor area detail (the 556th word) (2)
44112
100Fh
Monitor area detail (the 577th word) (2)
44154
1039h
Monitor area detail (the 557th word) (1)
44113
1010h
Monitor area detail (the 578th word) (1)
44155
103Ah
Monitor area detail (the 557th word) (2)
44114
1011h
Monitor area detail (the 578th word) (2)
44156
103Bh
INP-TN5A2052-E
43
Contents
5-47
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 579th word) (1)
44157
103Ch
Monitor area detail (the 579th word) (2)
44158
Monitor area detail (the 580th word) (1)
Monitor area detail (the 580th word) (2)
Register
Relative
No.
address
Monitor area detail (the 600th word) (1)
44199
1066h
103Dh
Monitor area detail (the 600th word) (2)
44200
1067h
44159
103Eh
Monitor area detail (the 601th word) (1)
44201
1068h
44160
103Fh
Monitor area detail (the 601th word) (2)
44202
1069h
Monitor area detail (the 581th word) (1)
44161
1040h
Monitor area detail (the 602th word) (1)
44203
106Ah
Monitor area detail (the 581th word) (2)
44162
1041h
Monitor area detail (the 602th word) (2)
44204
106Bh
Monitor area detail (the 582th word) (1)
44163
1042h
Monitor area detail (the 603th word) (1)
44205
106Ch
Monitor area detail (the 582th word) (2)
44164
1043h
Monitor area detail (the 603th word) (2)
44206
106Dh
Monitor area detail (the 583th word) (1)
44165
1044h
Monitor area detail (the 604th word) (1)
44207
106Eh
Monitor area detail (the 583th word) (2)
44166
1045h
Monitor area detail (the 604th word) (2)
44208
106Fh
Monitor area detail (the 584th word) (1)
44167
1046h
Monitor area detail (the 605th word) (1)
44209
1070h
Monitor area detail (the 584th word) (2)
44168
1047h
Monitor area detail (the 605th word) (2)
44210
1071h
Monitor area detail (the 585th word) (1)
44169
1048h
Monitor area detail (the 606th word) (1)
44211
1072h
Monitor area detail (the 585th word) (2)
44170
1049h
Monitor area detail (the 606th word) (2)
44212
1073h
Monitor area detail (the 586th word) (1)
44171
104Ah
Monitor area detail (the 607th word) (1)
44213
1074h
Monitor area detail (the 586th word) (2)
44172
104Bh
Monitor area detail (the 607th word) (2)
44214
1075h
Monitor area detail (the 587th word) (1)
44173
104Ch
Monitor area detail (the 608th word) (1)
44215
1076h
Monitor area detail (the 587th word) (2)
44174
104Dh
Monitor area detail (the 608th word) (2)
44216
1077h
Monitor area detail (the 588th word) (1)
44175
104Eh
Monitor area detail (the 609th word) (1)
44217
1078h
Monitor area detail (the 588th word) (2)
44176
104Fh
Monitor area detail (the 609th word) (2)
44218
1079h
Monitor area detail (the 589th word) (1)
44177
1050h
Monitor area detail (the 610th word) (1)
44219
107Ah
Monitor area detail (the 589th word) (2)
44178
1051h
Monitor area detail (the 610th word) (2)
44220
107Bh
Monitor area detail (the 590th word) (1)
44179
1052h
Monitor area detail (the 611th word) (1)
44221
107Ch
Monitor area detail (the 590th word) (2)
44180
1053h
Monitor area detail (the 611th word) (2)
44222
108Dh
Monitor area detail (the 591th word) (1)
44181
1054h
Monitor area detail (the 612th word) (1)
44223
107Eh
Monitor area detail (the 591th word) (2)
44182
1055h
Monitor area detail (the 612th word) (2)
44224
107Fh
Monitor area detail (the 592th word) (1)
44183
1056h
Monitor area detail (the 613th word) (1)
44225
1080h
Monitor area detail (the 592th word) (2)
44184
1057h
Monitor area detail (the 613th word) (2)
44226
1081h
Monitor area detail (the 593th word) (1)
44185
1058h
Monitor area detail (the 614th word) (1)
44227
1082h
Monitor area detail (the 593th word) (2)
44186
1059h
Monitor area detail (the 614th word) (2)
44228
1083h
Monitor area detail (the 594th word) (1)
44187
105Ah
Monitor area detail (the 615th word) (1)
44229
1084h
Monitor area detail (the 594th word) (2)
44188
105Bh
Monitor area detail (the 615th word) (2)
44230
1085h
Monitor area detail (the 595th word) (1)
44189
105Ch
Monitor area detail (the 616th word) (1)
44231
1086h
Monitor area detail (the 595th word) (2)
44190
105Dh
Monitor area detail (the 616th word) (2)
44232
1087h
Monitor area detail (the 596th word) (1)
44191
105Eh
Monitor area detail (the 617th word) (1)
44233
1088h
Monitor area detail (the 596th word) (2)
44192
105Fh
Monitor area detail (the 617th word) (2)
44234
1089h
Monitor area detail (the 597th word) (1)
44193
1060h
Monitor area detail (the 618th word) (1)
44235
108Ah
Monitor area detail (the 597th word) (2)
44194
1061h
Monitor area detail (the 618th word) (2)
44236
108Bh
Monitor area detail (the 598th word) (1)
44195
1062h
Monitor area detail (the 619th word) (1)
44237
108Ch
Monitor area detail (the 598th word) (2)
44196
1063h
Monitor area detail (the 619th word) (2)
44238
108Dh
Monitor area detail (the 599th word) (1)
44197
1064h
Monitor area detail (the 620th word) (1)
44239
108Eh
Monitor area detail (the 599th word) (2)
44198
1065h
Monitor area detail (the 620th word) (2)
44240
108Fh
5-48
44
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 621th word) (1)
44241
1090h
Monitor area detail (the 621th word) (2)
44242
Monitor area detail (the 622th word) (1)
Monitor area detail (the 622th word) (2)
Register
Relative
No.
address
Monitor area detail (the 642th word) (1)
44283
10BAh
1091h
Monitor area detail (the 642th word) (2)
44284
10BBh
44243
1092h
Monitor area detail (the 643th word) (1)
44285
10BCh
44244
1093h
Monitor area detail (the 643th word) (2)
44286
10BDh
Monitor area detail (the 623th word) (1)
44245
1094h
Monitor area detail (the 644th word) (1)
44287
10BEh
Monitor area detail (the 623th word) (2)
44246
1095h
Monitor area detail (the 644th word) (2)
44288
10BFh
Monitor area detail (the 624th word) (1)
44247
1096h
Monitor area detail (the 645th word) (1)
44289
10C0h
Monitor area detail (the 624th word) (2)
44248
1097h
Monitor area detail (the 645th word) (2)
44290
10C1h
Monitor area detail (the 625th word) (1)
44249
1098h
Monitor area detail (the 646th word) (1)
44291
10C2h
Monitor area detail (the 625th word) (2)
44250
1099h
Monitor area detail (the 646th word) (2)
44292
10C3h
Monitor area detail (the 626th word) (1)
44251
109Ah
Monitor area detail (the 647th word) (1)
44293
10C4h
Monitor area detail (the 626th word) (2)
44252
109Bh
Monitor area detail (the 647th word) (2)
44294
10C5h
Monitor area detail (the 627th word) (1)
44253
109Ch
Monitor area detail (the 648th word) (1)
44295
10C6h
Monitor area detail (the 627th word) (2)
44254
109Dh
Monitor area detail (the 648th word) (2)
44296
10C7h
Monitor area detail (the 628th word) (1)
44255
109Eh
Monitor area detail (the 649th word) (1)
44297
10C8h
Monitor area detail (the 628th word) (2)
44256
109Fh
Monitor area detail (the 649th word) (2)
44298
10C9h
Monitor area detail (the 629th word) (1)
44257
10A0h
Monitor area detail (the 650th word) (1)
44299
10CAh
Monitor area detail (the 629th word) (2)
44258
10A1h
Monitor area detail (the 650th word) (2)
44300
10CBh
Monitor area detail (the 630th word) (1)
44259
10A2h
Monitor area detail (the 651th word) (1)
44301
10CCh
Monitor area detail (the 630th word) (2)
44260
10A3h
Monitor area detail (the 651th word) (2)
44302
10CDh
Monitor area detail (the 631th word) (1)
44261
10A4h
Monitor area detail (the 652th word) (1)
44303
10CEh
Monitor area detail (the 631th word) (2)
44262
10A5h
Monitor area detail (the 652th word) (2)
44304
10CFh
Monitor area detail (the 632th word) (1)
44263
10A6h
Monitor area detail (the 653th word) (1)
44305
10D0h
Monitor area detail (the 632th word) (2)
44264
10A7h
Monitor area detail (the 653th word) (2)
44306
10D1h
Monitor area detail (the 633th word) (1)
44265
10A8h
Monitor area detail (the 654th word) (1)
44307
10D2h
Monitor area detail (the 633th word) (2)
44266
10A9h
Monitor area detail (the 654th word) (2)
44308
10D3h
Monitor area detail (the 634th word) (1)
44267
10AAh
Monitor area detail (the 655th word) (1)
44309
10D4h
Monitor area detail (the 634th word) (2)
44268
10ABh
Monitor area detail (the 655th word) (2)
44310
10D5h
Monitor area detail (the 635th word) (1)
44269
10ACh
Monitor area detail (the 656th word) (1)
44311
10D6h
Monitor area detail (the 635th word) (2)
44270
10ADh
Monitor area detail (the 656th word) (2)
44312
10D7h
Monitor area detail (the 636th word) (1)
44271
10AEh
Monitor area detail (the 657th word) (1)
44313
10D8h
Monitor area detail (the 636th word) (2)
44272
10AFh
Monitor area detail (the 657th word) (2)
44314
10D9h
Monitor area detail (the 637th word) (1)
44273
10B0h
Monitor area detail (the 658th word) (1)
44315
10DAh
Monitor area detail (the 637th word) (2)
44274
10B1h
Monitor area detail (the 658th word) (2)
44316
10DBh
Monitor area detail (the 638th word) (1)
44275
10B2h
Monitor area detail (the 659th word) (1)
44317
10DCh
Monitor area detail (the 638th word) (2)
44276
10B3h
Monitor area detail (the 659th word) (2)
44318
10DDh
Monitor area detail (the 639th word) (1)
44277
10B4h
Monitor area detail (the 660th word) (1)
44319
10DEh
Monitor area detail (the 639th word) (2)
44278
10B5h
Monitor area detail (the 660th word) (2)
44320
10DFh
Monitor area detail (the 640th word) (1)
44279
10B6h
Monitor area detail (the 661th word) (1)
44321
10E0h
Monitor area detail (the 640th word) (2)
44280
10B7h
Monitor area detail (the 661th word) (2)
44322
10E1h
Monitor area detail (the 641th word) (1)
44281
10B8h
Monitor area detail (the 662th word) (1)
44323
10E2h
Monitor area detail (the 641th word) (2)
44282
10B9h
Monitor area detail (the 662th word) (2)
44324
10E3h
INP-TN5A2052-E
45
Contents
5-49
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 663th word) (1)
44325
10E4h
Monitor area detail (the 663th word) (2)
44326
Monitor area detail (the 664th word) (1)
Monitor area detail (the 664th word) (2)
Register
Relative
No.
address
Monitor area detail (the 684th word) (1)
44367
110Eh
10E5h
Monitor area detail (the 684th word) (2)
44368
110Fh
44327
10E6h
Monitor area detail (the 685th word) (1)
44369
1110h
44328
10E7h
Monitor area detail (the 685th word) (2)
44370
1111h
Monitor area detail (the 665th word) (1)
44329
10E8h
Monitor area detail (the 686th word) (1)
44371
1112h
Monitor area detail (the 665th word) (2)
44330
10E9h
Monitor area detail (the 686th word) (2)
44372
1113h
Monitor area detail (the 666th word) (1)
44331
10EAh
Monitor area detail (the 687th word) (1)
44373
1114h
Monitor area detail (the 666th word) (2)
44332
10EBh
Monitor area detail (the 687th word) (2)
44374
1115h
Monitor area detail (the 667th word) (1)
44333
10ECh
Monitor area detail (the 688th word) (1)
44375
1116h
Monitor area detail (the 667th word) (2)
44334
10EDh
Monitor area detail (the 688th word) (2)
44376
1117h
Monitor area detail (the 668th word) (1)
44335
10EEh
Monitor area detail (the 689th word) (1)
44377
1118h
Monitor area detail (the 668th word) (2)
44336
10EFh
Monitor area detail (the 689th word) (2)
44378
1119h
Monitor area detail (the 669th word) (1)
44337
10F0h
Monitor area detail (the 690th word) (1)
44379
111Ah
Monitor area detail (the 669th word) (2)
44338
10F1h
Monitor area detail (the 690th word) (2)
44380
111Bh
Monitor area detail (the 670th word) (1)
44339
10F2h
Monitor area detail (the 691th word) (1)
44381
111Ch
Monitor area detail (the 670th word) (2)
44340
10F3h
Monitor area detail (the 691th word) (2)
44382
111Dh
Monitor area detail (the 671th word) (1)
44341
10F4h
Monitor area detail (the 692th word) (1)
44383
111Eh
Monitor area detail (the 671th word) (2)
44342
10F5h
Monitor area detail (the 692th word) (2)
44384
111Fh
Monitor area detail (the 672th word) (1)
44343
10F6h
Monitor area detail (the 693th word) (1)
44385
1120h
Monitor area detail (the 672th word) (2)
44344
10F7h
Monitor area detail (the 693th word) (2)
44386
1121h
Monitor area detail (the 673th word) (1)
44345
10F8h
Monitor area detail (the 694th word) (1)
44387
1122h
Monitor area detail (the 673th word) (2)
44346
10F9h
Monitor area detail (the 694th word) (2)
44388
1123h
Monitor area detail (the 674th word) (1)
44347
10FAh
Monitor area detail (the 695th word) (1)
44389
1124h
Monitor area detail (the 674th word) (2)
44348
10FBh
Monitor area detail (the 695th word) (2)
44390
1125h
Monitor area detail (the 675th word) (1)
44349
10FCh
Monitor area detail (the 696th word) (1)
44391
1126h
Monitor area detail (the 675th word) (2)
44350
10FDh
Monitor area detail (the 696th word) (2)
44392
1127h
Monitor area detail (the 676th word) (1)
44351
10FEh
Monitor area detail (the 697th word) (1)
44393
1128h
Monitor area detail (the 676th word) (2)
44352
10FFh
Monitor area detail (the 697th word) (2)
44394
1129h
Monitor area detail (the 677th word) (1)
44353
1100h
Monitor area detail (the 698th word) (1)
44395
112Ah
Monitor area detail (the 677th word) (2)
44354
1101h
Monitor area detail (the 698th word) (2)
44396
112Bh
Monitor area detail (the 678th word) (1)
44355
1102h
Monitor area detail (the 699th word) (1)
44397
112Ch
Monitor area detail (the 678th word) (2)
44356
1103h
Monitor area detail (the 699th word) (2)
44398
112Dh
Monitor area detail (the 679th word) (1)
44357
1104h
Monitor area detail (the 700th word) (1)
44399
112Eh
Monitor area detail (the 679th word) (2)
44358
1105h
Monitor area detail (the 700th word) (2)
44400
112Fh
Monitor area detail (the 680th word) (1)
44359
1106h
Monitor area detail (the 701th word) (1)
44401
1130h
Monitor area detail (the 680th word) (2)
44360
1107h
Monitor area detail (the 701th word) (2)
44402
1131h
Monitor area detail (the 681th word) (1)
44361
1108h
Monitor area detail (the 702th word) (1)
44403
1132h
Monitor area detail (the 681th word) (2)
44362
1109h
Monitor area detail (the 702th word) (2)
44404
1133h
Monitor area detail (the 682th word) (1)
44363
110Ah
Monitor area detail (the 703th word) (1)
44405
1134h
Monitor area detail (the 682th word) (2)
44364
110Bh
Monitor area detail (the 703th word) (2)
44406
1135h
Monitor area detail (the 683th word) (1)
44365
110Ch
Monitor area detail (the 704th word) (1)
44407
1136h
Monitor area detail (the 683th word) (2)
44366
110Dh
Monitor area detail (the 704th word) (2)
44408
1137h
5-50
46
Contents
INP-TN5A2052-E
5.4 Address Map and Data Format
Contents
Register
Relative
No.
address
Monitor area detail (the 705th word) (1)
44409
1138h
Monitor area detail (the 705th word) (2)
44410
1139h
Monitor area detail (the 706th word) (1)
44411
113Ah
Monitor area detail (the 706th word) (2)
44412
113Bh
Monitor area detail (the 707th word) (1)
44413
113Ch
Monitor area detail (the 707th word) (2)
44414
113Dh
Monitor area detail (the 708th word) (1)
44415
113Eh
Monitor area detail (the 708th word) (2)
44416
113Fh
Monitor area detail (the 709th word) (1)
44417
1140h
Monitor area detail (the 709th word) (2)
44418
1141h
Monitor area detail (the 710th word) (1)
44419
1142h
Monitor area detail (the 710th word) (2)
44420
1143h
Monitor area detail (the 711th word) (1)
44421
1144h
Monitor area detail (the 711th word) (2)
44422
1145h
Monitor area detail (the 712th word) (1)
44423
1146h
Monitor area detail (the 712th word) (2)
44424
1147h
Parameter setting error
30301
012Ch
MAC address (1)
30401
0190h
MAC address (2)
30402
0191h
MAC address (3)
30403
0192h
IP address (1)
30404
0193h
IP address (2)
30405
0194h
Subnet mask (1)
30406
0195h
Subnet mask (2)
30407
0196h
Default gateway (1)
30408
0197h
Default gateway (2)
30409
0198h
PLC error counter
31001
03E8h
PLC error code
31002
03E9h
PLC sending counter
31003
03EAh
PLC receiving counter
31004
03EBh
PLC reading size
31005
03ECh
PLC writing size
31006
03EDh
PLC inter-cycle time monitor
31007
03EEh
PLC inter-cycle time over counter
31008
03EFh
INP-TN5A2052-E
47
5-51
5.5 Setting/Monitor Area Entry Numbers (Control module)
5.5 Setting/Monitor Area Entry
Numbers (Control module)
The table below shows the register numbers of a control module, which are settable to each parameter of "Setting/Monitor area
entry St. No." and "Setting/Monitor area entry register No." of a programless communication module.
Note
Parameters marked "*" in the "Entry ban" column in the table can not be changed via programless communication modules.
Do not set them to each parameter of "Setting/Monitor area entry St. No." and "Setting/Monitor area entry register No."
Operation parameter
Register Register
Depends
FactoryReading out/Writing data
No.2
No.1
on Input
set value
setting range
(Ch2)
(Ch1)
range
Local SV value
0 to 100% FS
0
40001
40002

41001
42001
Communication SV value 0 to 100% FS
0
40023
40024

41100
42100
MV value
-3.0 to 103.0%
40005
40006
41002
42002
Manual mode switch
0: Auto
0 (Auto)
40013
40014
1: Manual
41003
42003
RUN/Standby switch
0: RUN
0 (RUN)
40017
40018
1: Standby
41004
42004
Remote mode switch
0: Local
0 (Local)
40009
40010
1: Remote
41007
42007
0
41005
42005
Auto-tuning RUN
0: Stop/End
command
1: Normal type
2: Low PV type
DO output
0: OFF
0
41031
42031
unlatch command
1: Unlatch
ALM1 set value 1
-100 to 100% FS
2.5% FS
41033
42033

ALM1 set value 2
-100 to 100% FS
2.5% FS
41034
42034

ALM2 set value 1
-100 to 100% FS
2.5% FS
41041
42041

ALM2 set value 2
-100 to 100% FS
2.5% FS
41042
42042

ALM3 set value 1
-100 to 100% FS
2.5% FS
41049
42049

ALM3 set value 2
-100 to 100% FS
2.5% FS
41050
42050

ALM4 set value 1
-100 to 100% FS
2.5% FS
41057
42057

ALM4 set value 2
-100 to 100% FS
2.5% FS
41058
42058

ALM5 set value 1
-100 to 100% FS
2.5% FS
41065
42065

ALM5 set value 2
-100 to 100% FS
2.5% FS
41066
42066

Contents
5-52
Register
No.3
(Ch3)
40003
43001
40025
43100
40007
43002
40015
43003
40019
43004
40011
43007
43005
Register
No.4
(Ch4)
40004
44001
40026
44100
40008
44002
40016
44003
40020
44004
40012
44007
44005
43031
44031
43033
43034
43041
43042
43049
43050
43057
43058
43065
43066
44033
44034
44041
44042
44049
44050
44057
44058
44065
44066
Entry
ban
*
INP-TN5A2052-E
5.5 Setting/Monitor Area Entry Numbers (Control module)
Control (PID) parameters
Contents
Reading out/Writing
data setting range
Proportional band [P]
Integration time [I]
0.0 to 999.9%
0 to 3200sec
Derivation time [D]
ON/OFF control hysteresis
Cooling proportional band coefficient [cool]
Dead band
Output convergence value
Anti-reset windup [ARW]
Direct/Reverse action setting
[MV1/MV2]
0.0 to 999.9sec
0 to 50% FS
0.0 to 100.0
-50.0 to 50.0%
-100.0 to 100.0%
0 to 100% FS
0: Reverse/None
1: Direct/None
2: Reverse/Direct
3: Direct/Reverse
4: Reverse/Reverse
5: Direct/Direct
0 to 100% FS
0 to 100% FS
-3.0 to 103.0%
-3.0 to 103.0%
-3.0 to 103.0%
-3.0 to 103.0%
0: MV1 -3.0%/103.0%
MV2 -3.0%/103.0%
1: MV1 Limit/103.0%
MV2 -3.0%/103.0%
2: MV1 -3.0%/Limit
MV2 -3.0%/103.0%
3: MV1 Limit/ Limit
MV2 -3.0%/103.0%
4: MV1 -3.0%/103.0%
MV2 Limit/103.0%
5: MV1 Limit/103.0%
MV2 Limit/103.0%
6: MV1 -3.0%/Limit
MV2 Limit/103.0%
7: MV1 Limit/Limit
MV2 Limit/103.0%
8: MV1 -3.0%/103.0%
MV2 -3.0%/Limit
9: MV1 Limit/103.0%
MV2 -3.0%/Limit
10: MV1 -3.0%/Limit
MV2 -3.0%/Limit
11: MV1 Limit/Limit
MV2 -3.0%/Limit
12: MV1 -3.0%/103.0%
MV2 Limit/Limit
13: MV1 Limit/103.0%
MV2 Limit/Limit
14: MV1 -3.0%/Limit
MV2 Limit/Limit
15: MV1 Limit/Limit
MV2 Limit/Limit
SV Lower Limit
SV Upper Limit
MV1 Lower Limit
MV1 Upper Limit
MV2 Lower Limit
MV2 Upper Limit
Output limiter type setting
INP-TN5A2052-E
Depends
Register Register Register Register
FactoryNo.4
No.3
No.2
on Input
No.1
set value
(Ch4)
(Ch3)
(Ch2)
range
(Ch1)
5.0
41102 42102 43102 44102
240
41103 42103 43103 44103




60.0
0.25% FS
1.0
0
0
100% FS
0
41104
41105
41106
41107
41108
41109
41110
42104
42105
42106
42107
42108
42109
42110
43104
43105
43106
43107
43108
43109
43110
44104
44105
44106
44107
44108
44109
44110
0% FS
100% FS
-3.0
103.0
-3.0
103.0
0
41218
41219
41255
41256
41257
41258
41259
42218
42219
42255
42256
42257
42258
42259
43218
43219
43255
43256
43257
43258
43259
44218
44219
44255
44256
44257
44258
44259
Entry
ban
5-53
5.5 Setting/Monitor Area Entry Numbers (Control module)
Setup parameters
Contents
PV input type
Register Register Register Register
Depends
Factory-set
Reading out/Writing
No.4
No.3
No.2
No.1
on Input
value
data setting range
(Ch4)
(Ch3)
(Ch2)
(Ch1)
range
7(TC/Pt)
40151
40152
40153
40154
0: JPt100
22(VI)
41029
42029
43029
44029
(0 to 150°C)
1: JPt100
(-150 to 600°C)
2: Pt100
(0 to 150°C)
3: Pt100
(-150 to 300°C)
4: Pt100
(-150 to 850°C)
5: J (0 to 400°C)
6: J (0 to 800°C)
7: K (0 to 400°C)
8: K (0 to 800°C)
9: K (0 to 1200°C)
10: R
(0 to 1600°C)
11: B
(0 to 1800°C)
12: S
(0 to 1600°C)
13: T
(-199 to 400°C)
14: E
(-199 to 800°C)
18: N
(0 to 1300°C)
19: PL-2
(0 to 1300°C)
21: Voltage (0 to 5V)
22: Voltage (1 to 5V)
23: Voltage (0 to 10V)
24: Voltage (2 to 10V)
25: Voltage(±5V)
26: Voltage(±10V)
30: Non
31: Pt100
(-200 to 850°C)
32: Pt100
(-200 to 800°C)
35: J
(-200 to 850°C)
36: J
(-150 to 850°C)
Entry
ban
*
37: J
(-200 to 800°C)
38: K
(-200 to 850°C)
39: K
(-150 to 850°C)
40: K
(-200 to 800°C)
5-54
INP-TN5A2052-E
5.5 Setting/Monitor Area Entry Numbers (Control module)
Contents
PV input scale lower
Register Register Register Register
Depends
Factory-set
Reading out/Writing
No.4
No.3
No.2
No.1
on Input
value
data setting range
(Ch4)
(Ch3)
(Ch2)
(Ch1)
range
-1999 to 9999
0% FS
41212
42212
43212
44212
PV input scale upper
Input master Ch
Decimal place
-1999 to 9999
0 to 4Ch
0: No decimal point
1: One decimal place
2: Two decimal places
PV input
0: PV
1: MV1
2: PV: (PV Change)
Temperature unit
0: °C
1: Not selectable
PV input shift
-10 to 10% FS
SV set value shift
-50 to 50% FS
PV input filter
0.0 to 120.0sec
PV display zero adjustment -50 to 50% FS
PV display span adjustment -50 to 50% FS
Cold junction compensation 0: OFF
1: ON
RSV zero adjustment
-50 to 50% FS
RSV span adjustment
-50 to 50% FS
SV unite
0:PV
1:MV
Remote input master St.
0 to 16
No.
Remote input master Ch. No. 0/1 to 4
FAULT MV1 set value
-3.0 to 103.0%
FAULT MV2 set value
-3.0 to 103.0%
SoftStart MV1 value
-3.0 to 103.0%
SoftStart MV2 value
-3.0 to 103.0%
SoftStart time
0 to 99min. 59sec.
Standby MV1 value
-3.0 to 103.0%
Standby MV2 value
-3.0 to 103.0%
Standby mode setting
0: ALM=OFF
1: ALM=ON
Linkage operation master 0 to 16
St. No. setting
Linkage operation master 1 to 4
Ch. No. setting
INP-TN5A2052-E






Entry
ban
*
*
100% FS
0
0
41213
41535
41214
42213
42535
42214
43213
43535
43214
44213
44535
44214
0(PV)
41539
42539
43539
44539
°C
41215
42215
43215
44215
0
0
2.0
0
0
1 (ON)
41216
41217
41220
41221
41222
41223
42216
42217
42220
42221
42222
42223
43216
43217
43220
43221
43222
43223
44216
44217
44220
44221
44222
44223
0
0
0(PV)
41225
41226
41531
42225
42226
42531
43225
43226
43531
44225
44226
44531
0
41532
42532
43532
44532
*
Each Ch.
-3.0
-3.0
103.0
103.0
0
-3.0
-3.0
0
41533
41260
41261
41262
41263
41264
41268
41269
41270
42533
42260
42261
42262
42263
42264
42268
42269
42270
43533
43260
43261
43262
43263
43264
43268
43269
43270
44533
44260
44261
44262
44263
44264
44268
44269
44270
*
0
41536
42536
43536
44536
*
Each Ch.
41537
42537
43537
44537
*
*
*
*
*
*
*
5-55
5.5 Setting/Monitor Area Entry Numbers (Control module)
System parameters
Proportional cycle
Depends
Reading out/Writing
on Input
data setting range
range
4: 0 to 20mA
5: 4 to 20mA
0: Own St. PV
1: Own St. SV
2: Own St. DV
3: Own St. MV 1
4: Own St. MV 2
5: Other St. PV
6: Other St. SV
7: Other St. MV
8: Own St. DO1
9: Own St. DO2
10: Own St. DO3
11: Own St. DO4
12: Own St. DO5
13: Non
1 to 120sec.
Output master St.
0 to 16 St.
Output master Ch.
1 to 4Ch
Output scaling base
-100.0 to 100.0%
Output scaling span
-100.0 to 100.0%
Output shutdown
0000 to 1111
bit0: Output 1
shutdown
bit1: Output 2
shutdown
bit2: Output 3
shutdown
bit3: Output 4
shutdown
Contents
Current output range
Output type
5-56
Factory-set
value
5 (4-20mA)
3 (Own St.
MV1)
Register
No.1
(Ch1)
40166
41801
40171
41803
2 (SSR drive) 40176
/30 (relay)
0
40172
41804
Each Ch.
40173
41805
0.0
40175
41807
100.0
40174
41806
0000
Register
No.2
(Ch2)
40167
42801
40177
42803
Register
No.3
(Ch3)
40168
43801
40183
43803
Register
No.4
(Ch4)
40169
44801
40189
44803
40182
40188
40194
40178
42804
40179
42805
40181
42807
40180
42806
40184
43804
40185
43805
40187
43807
40186
43806
40201
40190
44804
40191
44805
40193
44807
40192
44806
Entry
ban
*
*
INP-TN5A2052-E
5.5 Setting/Monitor Area Entry Numbers (Control module)
Contents
DI-1 function select
INP-TN5A2052-E
Register Register Register Register
Depends
Factory-set
Reading out/Writing
No.4
No.3
No.2
No.1
on Input
value
data setting range
(Ch4)
(Ch3)
(Ch2)
(Ch1)
range
0
41013
42013
43013
44013
0: No function
1: RUN
/Standby switch
2: Auto/Manual switch
3: Local
/Remote switch
4: No function
5: No function
6: Start AT
(Normal type)
7: Start AT
(Low voltage PV)
8: No function
9: No function
10: Ramp SV ON/OFF
11: Ramp SV Hold
12: Ramp soak OFF
13: Ramp soak
LUN/HOLD switch
14: No function
15: No function
16: No function
17: Unlatch (All)
18: Unlatch (DO1)
19: Unlatch (DO2)
20: Unlatch (DO3)
21: Unlatch (DO4)
22: Unlatch (DO5)
23: No function
24: No function
25: No function
26: Start timer (DO1)
27: Start timer (DO2)
28: Start timer (DO3)
29: Start timer (DO4)
30: Start timer (DO5)
31: No function
32: No function
33: No function
34: No function
35: No function
Entry
ban
5-57
5.5 Setting/Monitor Area Entry Numbers (Control module)
Depends
Reading out/Writing
on Input
data setting range
range
DI-1 function select
36: No function
37: No function
38: Ramp soak
pattern NO.1
39: Ramp soak
pattern NO.2
40: Ramp soak
pattern NO.4
41: Ramp soak
RUN
42: Ramp soak
HOLD
43: DO1:Ramp soak
RUN start
44: DO2:Ramp soak
RUN start
45: DO3:Ramp soak
RUN start
46:DO4:Ramp soak
RUN start
47: DO4:Ramp soak
RUN start
48: No function
49: Output1 shutdown
50: Output2 shutdown
51: Output3 shutdown
52: Output4 shutdown
53: No function
54: Valve OPEN
55: Valve CLOSE
56: Input CH.switch 1
57: Input CH.switch 1
DI-2 function select
0 to 57
DI-3 function select
0 to 57
DI-4 function select
0 to 57
DI-5 function select
0 to 57
DI-6 function select
0 to 57
DI-7 function select
0 to 57
DI-8 function select
0 to 57
DI-9 function select
0 to 57
DI-10 function select
0 to 57
DI-11 function select
0 to 57
DI-12 function select
0 to 57
DI-13 function select
0 to 57
DI-14 function select
0 to 57
DI-15 function select
0 to 57
DI-16 function select
0 to 57
DI master St. setting
0 to 32
DO1 output event type setting 0 to 218
Contents
5-58
Factory-set
value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register Register Register Register
No.4
No.3
No.2
No.1
(Ch4)
(Ch3)
(Ch2)
(Ch1)
41014
41015
41016
41017
41018
41019
41020
41021
41022
41023
41024
41025
41026
41027
41028
41011
41032
42014
42015
42016
42017
42018
42019
42020
42021
42022
42023
42024
42025
42026
42027
42028
42011
42032
43014
43015
43016
43017
43018
43019
43020
43021
43022
43023
43024
43025
43026
43027
43028
43011
43032
44014
44015
44016
44017
44018
44019
44020
44021
44022
44023
44024
44025
44026
44027
44028
44011
44032
Entry
ban
*
*
INP-TN5A2052-E
5.5 Setting/Monitor Area Entry Numbers (Control module)
Contents
DO1 option function setting
DO2 output event type setting
DO2 option function setting
DO3 output event type setting
DO3 option function setting
DO4 output event type setting
DO4 option function setting
DO5 output event type setting
DO5 option function setting
Ramp SV ON/OFF
Ramp SV-decline
Ramp SV-incline
INP-TN5A2052-E
Depends
Reading out/Writing
on Input
data setting range
range
0000 to 1111
bit0: Alarm latch
function
bit1: Error input alarm
function
bit2: Non-excitation
output function
bit3: Hold reset
function
0 to 218
0000 to 1111
bit0: Alarm latch
function
bit1: Error input alarm
function
bit2: Non-excitation
output function
bit3: Hold reset
function
0 to 218
0000 to 1111
bit0: Alarm latch
function
bit1: Error input alarm
function
bit2: Non-excitation
output function
bit3: Hold reset
function
0 to 218
0000 to 1111
bit0: Alarm latch
function
bit1: Error input alarm
function
bit2: Non-excitation
output function
bit3: Hold reset
function
0 to 218
0000 to 1111
bit0: Alarm latch
function
bit1: Error input alarm
function
bit2: Non-excitation
output function
bit3: Hold reset
function
0: OFF
1: ON
0 to 100% FS

0 to 100% FS

0000
Register Register Register Register
No.4
No.3
No.2
No.1
(Ch4)
(Ch3)
(Ch2)
(Ch1)
41036
42036
43036
44036
0
0000
41040
41044
42040
42044
43040
43044
44040
44044
*
0
0000
41048
41052
42048
42052
43048
43052
44048
44052
*
0
0000
41056
41060
42056
42060
43056
43060
44056
44060
*
0
0000
41064
41068
42064
42068
43064
43068
44064
44068
*
1 (ON)
41299
42299
43299
44299
0
0
41300
41301
42300
42301
43300
43301
44300
44301
Factory-set
value
Entry
ban
5-59
5.5 Setting/Monitor Area Entry Numbers (Control module)
Depends
Reading out/Writing
on Input
data setting range
range
Ramp SV slope time units 0: Slope deg/hr.
1: Slope deg/min.
Control method
0: PID
1: FUSSY PID
2: PID against
open-loop
ON/OFF hysteresis setting 0: OFF
1: ON
Mode at startup
0: Auto
1: Manual
2: Remote
3: Standby
MV communication
0: MV1
1: MV2
Process
0: 200 msec
1: 100 msec
Contents
5-60
Register Register Register Register
No.4
No.3
No.2
No.1
(Ch4)
(Ch3)
(Ch2)
(Ch1)
0 (Slope deg/ 41302
42302
43302
44302
hr.)
0 (PID)
41291
42291
43291
44291
Factory-set
value
Entry
ban
1 (ON)
41292
42292
43292
44292
0 (Auto)
41304
42304
43304
44304
*
0(MV1)
40195
41810
41294
40196
42810
42294
40197
43810
43294
40198
44810
44294
*
0(200 msec)
*
INP-TN5A2052-E
5.5 Setting/Monitor Area Entry Numbers (Control module)
Ramp/soak
Contents
Ramp/soak command
Pattern arrangement
Ramp/soak
Activation pattern
(STEP No.)
Time
SV-1
Step 1
Ramp time
Step 1
Soak time
SV-2
Step 2
Ramp time
Step 2
Soak time
SV-3
Step 3
Ramp time
Step 3
Soak time
SV-4
Step 4
Ramp time
Step 4
Soak time
SV-5
Step 5
Ramp time
Step 5
Soak time
SV-6
Step 6
Ramp time
Step 6
Soak time
SV-7
Step 7
Ramp time
Step 7
Soak time
SV-8
Step 8
Ramp time
Step 8
Soak time
INP-TN5A2052-E
Depends
FactoryReading out/Writing data
on Input
set value
setting range
range
0(stop)
0: off
1: on
2: holde
0: Normal
0: Normal pattern
pattern
1: Special pattern
2: 64 STEP
0 to 7
6
Register Register Register Register
No.4
No.3
No.2
No.1
(Ch4)
(Ch3)
(Ch2)
(Ch1)
41006
42006
43006
44006
0: hr.min.
1: min.sec.
0 to 100%FS
0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 100%FS
0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 100%FS
0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 100%FS
0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 100%FS
0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 100%FS
0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 100%FS
0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 100%FS
0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.








41408
42408
43408
44408
41431
42431
43431
44431
0:hr.min.
41432
42432
43432
44432
0%FS
0
41451
41452
42451
42452
43451
43452
44451
44452
0
41453
42453
43453
44453
0%FS
0
41454
41455
42454
42455
43454
43455
44454
44455
0
41456
42456
43456
44456
0%FS
0
41457
41458
42457
42458
43457
43458
44457
44458
0
41459
42459
43459
44459
0%FS
0
41460
41461
42460
42461
43460
43461
44460
44461
0
41462
42462
43462
44462
0%FS
0
41463
41464
42463
42464
43463
43464
44463
44464
0
41465
42465
43465
44465
0%FS
0
41466
41467
42467
42468
43466
43467
44466
44467
0
41468
42469
43468
44468
0%FS
0
41469
41470
42469
42470
43469
43470
44469
44470
0
41471
42471
43471
44471
0%FS
0
41472
41473
42472
42473
43472
43473
44472
44473
0
41474
42474
43474
44474
Entry
ban
5-61
5.5 Setting/Monitor Area Entry Numbers (Control module)
Contents
SV-9
Step 9
Ramp time
Step 9
Soak time
SV-10
Step 10
Ramp time
Step 10
Soak time
SV-11
Step 11
Ramp time
Step 11
Soak time
SV-12
Step 12
Ramp time
Step 12
Soak time
SV-13
Step 13
Ramp time
Step 13
Soak time
SV-14
Step 14
Ramp time
Step 14
Soak time
SV-15
Step 15
Ramp time
Step 15
Soak time
SV-16
Step 16
Ramp time
Step 16
Soak time
Ramp/soak mode
Guarantee soak
on/off
Guarantee soak
band(Upper)
Guarantee soak
band(Lower)
PV start
Continue mode
5-62
Depends
Reading out/Writing data
on Input
setting range
range
0 to 100%FS

0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 100%FS

0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 100%FS

0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 100%FS

0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 100%FS

0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 100%FS

0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 100%FS

0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 100%FS

0 to 99min.59sec.
/0 to 99hr59min.
0 to 99min.59sec.
/0 to 99hr59min.
0 to 15
0: off
1: on
0 to 50

0 to 50
0: off
1: on
0: RSE
1: Con
2: ini

0%FS
0
Register Register Register Register
No.4
No.3
No.2
No.1
(Ch4)
(Ch3)
(Ch2)
(Ch1)
41475
42475
43475
44475
41476
42476
43476
44476
0
41477
42477
43477
44477
0%FS
0
41478
41479
42478
42479
43478
43479
44478
44479
0
41480
42480
43480
44480
0%FS
0
41481
41482
42481
42482
43481
43482
44481
44482
0
41483
42483
43483
44483
0%FS
0
41484
41485
42484
42485
43484
43485
44484
44485
0
41486
42486
43486
44486
0%FS
0
41487
41488
42487
42488
43487
43488
44487
44488
0
41489
42489
43489
44489
0%FS
0
41490
41491
42490
42491
43490
43491
44490
44491
0
41492
42492
43492
44492
0%FS
0
41493
41494
42493
42494
43493
43494
44493
44494
0
41495
42495
43495
44495
0%FS
0
41496
41497
42496
42497
43496
43497
44496
44497
0
41498
42498
43498
44498
0
0: off
41433
41441
42433
42441
43433
43441
44433
44441
1.25%FS
41443
42443
43443
44443
1.25%FS
41442
42442
43442
44442
0(off)
41444
42444
43444
44444
0(RSE)
41445
42445
43445
44445
Factoryset value
Entry
ban
INP-TN5A2052-E
5.5 Setting/Monitor Area Entry Numbers (Control module)
Valve control
Contents
Valve control
Dead band setting of
PFB
Valve stroke time
INP-TN5A2052-E
Register Register Register Register
Depends
FactoryReading out/Writing data
No.4
No.3
No.2
No.1
on Input
set value
setting range
(Ch4)
(Ch3)
(Ch2)
(Ch1)
range
0(PID
41312
42312
43312
44312
0: PID control
control)
1: SRV1
2: SRV2
0.01 to 100.0
50.0
41295
42295
43295
44295

5 to 180sec
5.0
41296
42296
43296
Entry
ban
44296
5-63
5.5 Setting/Monitor Area Entry Numbers (Control module)
Alarm parameters
Contents
ALM1 hysteresis
ALM1 delay time
ALM1 delay time units
ALM2 hysteresis
ALM2 delay time
ALM2 delay time units
ALM3 hysteresis
ALM3 delay time
ALM3 delay time units
ALM4 hysteresis
ALM4 delay time
ALM4 delay time units
ALM5 hysteresis
ALM5 delay time
ALM5 delay time units
Object Ch. No.
for interchannel ALM1
Object Ch. No.
for interchannel ALM2
Object Ch. No.
for interchannel ALM3
Object Ch. No.
for interchannel ALM4
Object Ch. No.
for interchannel ALM5
Changeover the
arrangement of CT input
terminal
CT[A]HB alarm set value
CT[A]HB alarm hysteresis
CT[A]HB load short-circuit
alarm set value
CT[A]HB load short-circuit
alarm hysteresis
CT B monitor
1°C
0
Register Register Register Register
No.4
No.3
No.2
No.1
(Ch4)
(Ch3)
(Ch2)
(Ch1)
41035
42035
43035
44035
41037
42037
43037
44037
0 (sec.)
41038
42038
43038
44038
1°C
0
41043
41045
42043
42045
43043
43045
44043
44045
0 (sec.)
41046
42046
43046
44046
1°C
0
41051
41053
42051
42053
43051
43053
44051
44053
0 (sec.)
41054
42054
43054
44054
1°C
0
41059
41061
42059
42061
43059
43061
44059
44061
0 (sec.)
41062
42062
43062
44062
1°C
0
41067
41069
42067
42069
43067
43069
44067
44069
0 (sec.)
41070
42070
43070
44070
1
41039
42039
43039
44039
1 to 4
1
41047
42047
43047
44047
1 to 4
1
41055
42055
43055
44055
1 to 4
1
41063
42063
43063
44063
1 to 4
1
41071
42071
43071
44071
0: AB arrangement
1: AA arrangement
40202
0.0 to 50.0(A)
0.0 to 50.0(A)
0.0 to 50.0(A)
0
(AB
arrangement)
0
0.5
0
41072
41073
41074
42072
42073
42074
43072
43073
43074
44072
44073
44074
0.0 to 50.0(A)
0.5
41075
42075
43075
44075
0(off)
41083
42083
43083
44083
0
0.5
0
41076
41077
41078
42076
42077
42078
43076
43077
43078
44076
44077
44078
Depends
Reading out/Writing
on Input
data setting range
range
0 to 50% FS

0 to 99min.59sec.
/ 0 to 99hr.59min.
0: sec.
1: min.
0 to 50% FS

0 to 99min.59sec.
/ 0 to 99hr.59min.
0: sec.
1: min.
0 to 50% FS

0 to 99min.59sec.
/ 0 to 99hr.59min.
0: sec.
1: min.
0 to 50% FS

0 to 99min.59sec.
/ 0 to 99hr.59min.
0: sec.
1: min.
0 to 50% FS

0 to 99min.59sec.
/ 0 to 99hr.59min.
0: sec.
1: min.
1 to 4
0:off
1:on
CT[B]HB alarm set value 0.0 to 50.0(A)
CT[B]HB alarm hysteresis 0.0 to 50.0(A)
CT[B]HB load short-circuit 0.0 to 50.0(A)
alarm set value
5-64
Factory-set
value
Entry
ban
*
INP-TN5A2052-E
5.5 Setting/Monitor Area Entry Numbers (Control module)
Depends
Factory-set
Reading out/Writing
on Input
value
data setting range
range
CT[B]HB load short-circuit 0.0 to 50.0(A)
0.5
alarm hysteresis
Loop break detection time 0 to 9999sec
0 (Off)
Loop break detection band 0 to 100% FS
2.5% FS

Contents
INP-TN5A2052-E
Register Register Register Register
No.4
No.3
No.2
No.1
(Ch4)
(Ch3)
(Ch2)
(Ch1)
41079
42079
43079
44079
41080
41081
42080
42081
43080
43081
Entry
ban
44080
44081
5-65
5.5 Setting/Monitor Area Entry Numbers (Control module)
Communication parameters
Contents
RS-485 Parity setting
Reading out/Writing
data setting range
0: None
1: Odd
2: Even
RS-485 Communication
0: 9.6kbps
speed
1: 19.2kbps
2: 38.4kbps
3: Forbidden
4: 115.2kbps
RS-485 Communication
0: Ready only
permission
1: Read/Write
RS-485 Response interval 0 to 25 (20ms/1digit)
time
Enhanced communication 0: PUMC not connected
module (PUMC)
(RS-485 Enable)
connection permission
1: PUMC connected (RS485 Disable)
Master/slave setting in
0: Master
connected modules
1: Slave
User address 01 :
30000 to 49999
Register No. specification
User address 02 :
30000 to 49999
Register No. specification
User address 03 :
30000 to 49999
Register No. specification
User address 04 :
30000 to 49999
Register No. specification
User address 05 :
30000 to 49999
Register No. specification
User address 06 :
30000 to 49999
Register No. specification
User address 07 :
30000 to 49999
Register No. specification
User address 08 :
30000 to 49999
Register No. specification
User address 09 :
30000 to 49999
Register No. specification
User address 10 :
30000 to 49999
Register No. specification
User address 11 :
30000 to 49999
Register No. specification
User address 12 :
30000 to 49999
Register No. specification
User address 13 :
30000 to 49999
Register No. specification
User address 14 :
30000 to 49999
Register No. specification
User address 15 :
30000 to 49999
Register No. specification
User address 16 :
30000 to 49999
Register No. specification
User address 17 :
30000 to 49999
Register No. specification
5-66
Depends
Register Register Register Register
Factory-set
No.4
No.3
No.2
on Input
No.1
value
(Ch4)
(Ch3)
(Ch2)
range
(Ch1)
0
40111
Entry
ban
*
1
40115
*
1 (R/W)
40114
*
0
40113
*
0 (RS-485
Enable)
40116
*
1 (Slave)
40117
*
30002(PV1)
40301
*
30002(PV1)
40302
*
30002(PV1)
40303
*
30002(PV1)
40304
*
30002(PV1)
40305
*
30002(PV1)
40306
*
30002(PV1)
40307
*
30002(PV1)
40308
*
30002(PV1)
40309
*
30002(PV1)
40310
*
30002(PV1)
40311
*
30002(PV1)
40312
*
30002(PV1)
40313
*
30002(PV1)
40314
*
30002(PV1)
40315
*
30002(PV1)
40316
*
30002(PV1)
40317
*
INP-TN5A2052-E
5.5 Setting/Monitor Area Entry Numbers (Control module)
Contents
User address 18 :
Register No. specification
User address 19 :
Register No. specification
User address 20 :
Register No. specification
User address 21 :
Register No. specification
User address 22 :
Register No. specification
User address 23 :
Register No. specification
User address 24 :
Register No. specification
User address 25 :
Register No. specification
User address 26 :
Register No. specification
User address 27 :
Register No. specification
User address 28 :
Register No. specification
User address 29 :
Register No. specification
User address 30 :
Register No. specification
User address 31 :
Register No. specification
User address 32 :
Register No. specification
User address 01 :
R/W field
User address 02 :
R/W field
User address 03 :
R/W field
User address 04 :
R/W field
User address 05 :
R/W field
User address 06 :
R/W field
User address 07 :
R/W field
User address 08 :
R/W field
User address 09 :
R/W field
User address 10 :
R/W field
User address 11 :
R/W field
User address 12 :
R/W field
INP-TN5A2052-E
Reading out/Writing
data setting range
30000 to 49999
Depends
Register Register Register Register
Factory-set
No.4
No.3
No.2
on Input
No.1
value
(Ch4)
(Ch3)
(Ch2)
range
(Ch1)
30002(PV1)
40318
Entry
ban
*
30000 to 49999
30002(PV1)
40319
*
30000 to 49999
30002(PV1)
40320
*
30000 to 49999
30002(PV1)
40321
*
30000 to 49999
30002(PV1)
40322
*
30000 to 49999
30002(PV1)
40323
*
30000 to 49999
30002(PV1)
40324
*
30000 to 49999
30002(PV1)
40325
*
30000 to 49999
30002(PV1)
40326
*
30000 to 49999
30002(PV1)
40327
*
30000 to 49999
30002(PV1)
40328
*
30000 to 49999
30002(PV1)
40329
*
30000 to 49999
30002(PV1)
40330
*
30000 to 49999
30002(PV1)
40331
*
30000 to 49999
30002(PV1)
40332
*
Depends on
"User address 01"
Depends on
"User address 02"
Depends on
"User address 03"
Depends on
"User address 04"
Depends on
"User address 05"
Depends on
"User address 06"
Depends on
"User address 07"
Depends on
"User address 08"
Depends on
"User address 09"
Depends on
"User address 10"
Depends on
"User address 11"
Depends on
"User address 12"
-
45001
*
-
45002
*
-
45003
*
-
45004
*
-
45005
*
-
45006
*
-
45007
*
-
45008
*
-
45009
*
-
45010
*
-
45011
*
-
45012
*
5-67
5.5 Setting/Monitor Area Entry Numbers (Control module)
Contents
User address 13 :
R/W field
User address 14 :
R/W field
User address 15 :
R/W field
User address 16 :
R/W field
User address 17 :
R/W field
User address 18 :
R/W field
User address 19 :
R/W field
User address 20 :
R/W field
User address 21 :
R/W field
User address 22 :
R/W field
User address 23 :
R/W field
User address 24 :
R/W field
User address 25 :
R/W field
User address 26 :
R/W field
User address 27 :
R/W field
User address 28 :
R/W field
User address 29 :
R/W field
User address 30 :
R/W field
User address 31 :
R/W field
User address 32 :
R/W field
5-68
Reading out/Writing
data setting range
Depends on
"User address 13"
Depends on
"User address 14"
Depends on
"User address 15"
Depends on
"User address 16"
Depends on
"User address 17"
Depends on
"User address 18"
Depends on
"User address 19"
Depends on
"User address 20"
Depends on
"User address 21"
Depends on
"User address 22"
Depends on
"User address 23"
Depends on
"User address 24"
Depends on
"User address 25"
Depends on
"User address 26"
Depends on
"User address 27"
Depends on
"User address 28"
Depends on
"User address 29"
Depends on
"User address 30"
Depends on
"User address 31"
Depends on
"User address 32"
Depends
Register Register Register Register
Factory-set
No.4
No.3
No.2
on Input
No.1
value
(Ch4)
(Ch3)
(Ch2)
range
(Ch1)
45013
Entry
ban
*
-
45014
*
-
45015
*
-
45016
*
-
45017
*
-
45018
*
-
45019
*
-
45020
*
-
45021
*
-
45022
*
-
45023
*
-
45024
*
-
45025
*
-
45026
*
-
45027
*
-
45028
*
-
45029
*
-
45030
*
-
45031
*
-
45032
*
INP-TN5A2052-E
5.5 Setting/Monitor Area Entry Numbers (Control module)
Configuration parameters
Register Register Register Register
Depends
Factory-set
Reading out/Writing
No.4
No.3
No.2
No.1
on Input
value
data setting range
(Ch4)
(Ch3)
(Ch2)
(Ch1)
range
Control when burnout is
0: Stop control
0 (Stop control) 41407
42407
43407
44407
detected
1: Continue control
LED2 Lamp Configuration 0 to 255
1
40222
Contents
LED3 Lamp Configuration
LED4 Lamp Configuration
LED5 Lamp Configuration
LED6 Lamp Configuration
Reset main unit
0 to 255
0 to 255
0 to 255
0 to 255
0: Do nothing
1: Reset main unit
12
13
14
15
0
40223
40224
40225
40226
40101
Entry
ban
*
*
*
*
*
*
Monitor parameters
Note
Monitor parameter can be entered to the monitor area only. Do not enter it to the setting area.
Contents
SV value
Remote mode switch
Reading out/Writing
data setting range
System time
Measurement value (PV)
0 to 100% FS
0: Local
1: Remote
0 to 65535
-5 to 105% FS
Measurement value (SV)
0 to 100% FS
DV
-105 to 105% FS
Output value (MV1)
-3.0 to 103.0%
Output value (MV2)
-3.0 to 103.0%
Remote SV (RSV)
0.0 to 100.0% FS
RCJtemp
Heater current [A]
-3276.7 to
3276.7°C
0.0 to 50.0A
Heater current [B]
0.0 to 50.0A
Leak current [A]
0.0 to 50.0A
Leak current [B]
0.0 to 50.0A
Error source display
Alarm 1 to 5 status
0 to FFFF
0 to 001F
INP-TN5A2052-E
Register
Depends
Factory-set
No.1
on Input
value
(Ch1)
range

30905
30030
31037
30002
31001
30006
31002
30010
31003
30014
31004
30015
31005
30022
31045
30110
31016
30071
31046
30072
31047
30081
31048
30082
31049
31008
31007
Register Register
No.3
No.2
(Ch3)
(Ch2)
30906
30907
30031
30032
32037
33037
30001
30003
30004
32001
33001
30007
30008
32002
33002
30011
30012
32003
33003
30016
30018
32004
33004
30017
30019
32005
33005
30023
30024
32045
33045
30111
30112
32016
33016
30073
30075
32046
33046
30074
30076
32047
33047
30083
30085
32048
33048
30084
30086
32049
33049
32008
33008
32007
33007
Register
No.4
(Ch4)
30908
30033
34037
Entry
ban
30005
34001
30009
34002
30013
34003
30020
34004
30021
34005
30025
34045
30113
34016
30077
34046
30078
34047
30087
34048
30088
34049
34008
34007
5-69
5.5 Setting/Monitor Area Entry Numbers (Control module)
Contents
Reading out/Writing
data setting range
Event input status
0 to FFFF
Remaining time on timer 1 0 to 99min.59sec.
/ 0 to 99hr. 59min.
Remaining time on timer 2 0 to 99min.59sec.
/ 0 to 99hr. 59min.
Remaining time on timer 3 0 to 99min.59sec.
/ 0 to 99hr. 59min.
Remaining time on timer 4 0 to 99min.59sec.
/ 0 to 99hr. 59min.
Remaining time on timer 5 0 to 99min.59sec.
/ 0 to 99hr. 59min.
Output value
-3.0 to 103.0%
RS-485 communication
0: Read only
permission
1: Read/ Write
PWM Output status
0 to 15
monitor (ALL)
PWM Output status
0 to 15
monitor (each Ch)
Estimated MV value
0.0 to 100.0%
Register Register Register Register
Depends
Factory-set
No.4
No.3
No.2
No.1
on Input
value
(Ch4)
(Ch3)
(Ch2)
(Ch1)
range
31061
32061
33061
34061
31011
32011
33011
34011
-
31012
32012
33012
34012
-
31013
32013
33013
34013
-
31014
32014
33014
34014
-
31015
32015
33015
34015
-
30120
30121
30122
30062
30123
31906
32906
33906
34906
-
30931
31907
30034
31009
30038
31010
30932
32907
30035
32009
30039
32010
30933
33907
30036
33009
30040
33010
30067
30934
34907
30037
34009
30041
34010
0 to 129
-
Ramp/Soak elapsed time
0 to 99min59sec
/0 to 99hr59min
0 to FFFF
-
RS485 communication error
alarm monitor
5-70
30066
-
Ramp/Soak progress
Entry
ban
INP-TN5A2052-E
5.6 Setting/Monitor Area Entry Numbers (Event module)
5.6 Setting/Monitor Area Entry
Numbers (Event I/O module)
The table below shows the register numbers of an event I/O module, which are settable to each parameter of "Setting/Monitor
area entry St. No." and "Setting/Monitor area entry register No." of a programless communication module.
Note
Parameters marked "*" in the "Entry ban" column in the table can not be changed via programless communication modules.
Do not set them to each parameter of "Setting/Monitor area entry St. No." and "Setting/Monitor area entry register No."
Operation parameters
Reading out/Writing data setting
range
Contents
Factory-set
value
Register No.
RUN/Standby Switch
0: RUN
1: Standby
0
40021
DI output unlatch command
0: OFF
1: Unlatch
0
40022
DO output unlatch command
0: OFF
1: Unlatch
0
40023
Entry
ban
Digital input parameters
Contents
Reading out/Writing data setting
range
Factory-set
value
Register No.
DI1 input option
Bit 0 : LATCH
Bit 1 : NOT
Bit 2 : AND
Bit 3 : OR
0
40701
DI1 input logic operation AND
0-00FF
0
40703
DI1 input logic operation OR
0-00FF
0
40704
DI2 input option
0-15
0
40705
DI2 input logic operation AND
0-00FF
0
40707
DI2 input logic operation OR
0-00FF
0
40708
DI3 input option
0-15
0
40709
DI3 input logic operation AND
0-00FF
0
40711
DI3 input logic operation OR
0-00FF
0
40712
DI4 input option
0-15
0
40713
INP-TN5A2052-E
Entry
ban
5-71
5.6 Setting/Monitor Area Entry Numbers (Event module)
Contents
Reading out/Writing data setting
range
Factory-set
value
Register No.
DI4 input logic operation AND
0-00FF
0
40715
DI4 input logic operation OR
0-00FF
0
40716
DI5 input option
0-15
0
40717
DI5 input logic operation AND
0-00FF
0
40719
DI5 input logic operation OR
0-00FF
0
40720
DI6 input option
0-15
0
40721
DI6 input logic operation AND
0-00FF
0
40723
DI6 input logic operation OR
0-00FF
0
40724
DI7 input option
0-15
0
40725
DI7 input logic operation AND
0-00FF
0
40727
DI7 input logic operation OR
0-00FF
0
40728
DI8 input option
0-15
0
40729
DI8 input logic operation AND
0-00FF
0
40731
DI8 input logic operation OR
0-00FF
0
40732
5-72
Entry
ban
INP-TN5A2052-E
5.6 Setting/Monitor Area Entry Numbers (Event module)
Digital output parameters
Contents
Reading out/Writing data setting
range
Factory-set
value
Register No.
Entry
ban
DO1 output type
0: Event output
1: Control output
0
40401
*
DO1 master St. No.
0-255
0
40402
DO1 master Ch. No.
1-4
1
40403
*
*
DO1 BIT position
0-FFFF
1
40404
DO1 output option
Bit 0 : LATCH
Bit 1 : NOT
Bit 2 : AND
Bit 3 : OR
0
40405
DO1 output logic operation AND
0-00FF
0
40407
DO1 output logic operation OR
0-00FF
0
40408
DO1 scaling base
-100.0 - +100.0
0
40409
DO1 scaling span
-100.0 - +100.0
1000
40410
DO1 proportion cycle
1-120
30
40411
DO1 output limit (lower)
0.0 - 100.0
0
40412
DO1 output limit (upper)
0.0 - 100.0
1000
40413
DO1 limit type
0: Lower limit -3%, Upper limit 103%
1: Lower limit, Upper limit 103%
2: Lower limit -3%, Upper limit
3: Lower limit, Upper limit
0
40414
DO2 output type
0: Event output
1: Control output
0
40415
*
DO2 master St. No.
0-255
0
40416
DO2 master Ch. No.
1-4
1
40417
*
*
DO2 BIT position
0-FFFF
2
40418
DO2 output option
0-15
0
40419
DO2 output logic operation AND
0-00FF
0
40421
DO2 output logic operation OR
0-00FF
0
40422
DO2 scaling base
-100.0 - +100.0
0
40423
DO2 scaling span
-100.0 - +100.0
1000
40424
DO2 proportion cycle
1-120
30
40425
DO2 output limit (lower)
0.0 - 100.0
0
40426
DO2 output limit (upper)
0.0 - 100.0
1000
40427
DO2 limit type
0-3
0
40428
DO3 output type
0: Event output
1: Control output
0
40429
*
DO3 master St. No.
0-255
0
40430
DO3 master Ch. No.
1-4
1
40431
*
*
DO3 BIT position
0-FFFF
4
40432
INP-TN5A2052-E
5-73
5.6 Setting/Monitor Area Entry Numbers (Event module)
Contents
Reading out/Writing data setting
range
Factory-set
value
Register No.
Entry
ban
DO3 output option
0-15
0
40433
DO3 output logic operation AND
0-00FF
0
40435
DO3 output logic operation OR
0-00FF
0
40436
DO3 scaling base
-100.0 - +100.0
0
40437
DO3 scaling span
-100.0 - +100.0
1000
40438
DO3 proportion cycle
1-120
30
40439
DO3 output limit (lower)
0.0 - 100.0
0
40440
DO3 output limit (upper)
0.0 - 100.0
1000
40441
DO3 limit type
0-3
0
40442
DO4 output type
0: Event output
1: Control output
0
40443
*
DO4 master St. No.
0-255
0
40444
DO4 master Ch. No.
1-4
1
40445
*
*
DO4 BIT position
0-FFFF
8
40446
DO4 output option
0-15
0
40447
DO4 output logic operation AND
0-00FF
0
40449
DO4 output logic operation OR
0-00FF
0
40450
DO4 scaling base
-100.0 - +100.0
0
40451
DO4 scaling span
-100.0 - +100.0
1000
40452
DO4 proportion cycle
1-120
30
40453
DO4 output limit (lower)
0.0 - 100.0
0
40454
DO4 output limit (upper)
0.0 - 100.0
1000
40455
DO4 limit type
0-3
0
40456
DO5 output type
0: Event output
1: Control output
0
40457
*
DO5 master St. No.
0-255
0
40458
DO5 master Ch. No.
1-4
1
40459
*
*
DO5 BIT position
0-FFFF
16
40460
DO5 output option
0-15
0
40461
DO5 output logic operation AND
0-00FF
0
40463
DO5 output logic operation OR
0-00FF
0
40464
DO5 scaling base
-100.0 - +100.0
0
40465
DO5 scaling span
-100.0 - +100.0
1000
40466
DO5 proportion cycle
1-120
30
40467
DO5 output limit (lower)
0.0 - 100.0
0
40468
DO5 output limit (upper)
0.0 - 100.0
1000
40469
DO5 limit type
0-3
0
40470
5-74
INP-TN5A2052-E
5.6 Setting/Monitor Area Entry Numbers (Event module)
Contents
Reading out/Writing data setting
range
Factory-set
value
Register No.
Entry
ban
DO6 output type
0: Event output
1: Control output
0
40471
*
DO6 master St. No.
0-255
0
40472
DO6 master Ch. No.
1-4
1
40473
*
*
DO6 BIT position
0-FFFF
0
40474
DO6 output option
0-15
0
40475
DO6 output logic operation AND
0-00FF
0
40477
DO6 output logic operation OR
0-00FF
0
40478
DO6 scaling base
-100.0 - +100.0
0
40479
DO6 scaling span
-100.0 - +100.0
1000
40480
DO6 proportion cycle
1-120
30
40481
DO6 output limit (lower)
0.0 - 100.0
0
40482
DO6 output limit (upper)
0.0 - 100.0
1000
40483
DO6 limit type
0-3
0
40484
DO7 output type
0: Event output
1: Control output
0
40485
*
DO7 master St. No.
0-255
0
40486
DO7 master Ch. No.
1-4
1
40487
*
*
DO7 BIT position
0-FFFF
0
40488
DO7 output option
0-15
0
40489
DO7 output logic operation AND
0-00FF
0
40491
DO7 output logic operation OR
0-00FF
0
40492
DO7 scaling base
-100.0 - +100.0
0
40493
DO7 scaling span
-100.0 - +100.0
1000
40494
DO7 proportion cycle
1-120
30
40495
DO7 output limit (lower)
0.0 - 100.0
0
40496
DO7 output limit (upper)
0.0 - 100.0
1000
40497
DO7 limit type
0-3
0
40498
DO8 output type
0: Event output
1: Control output
0
40499
*
DO8 master St. No.
0-255
0
40500
DO8 master Ch. No.
1-4
1
40501
*
*
DO8 BIT position
0-FFFF
0
40502
DO8 output option
0-15
0
40503
DO8 output logic operation AND
0-00FF
0
40505
DO8 output logic operation OR
0-00FF
0
40506
DO8 scaling base
-100.0 - +100.0
0
40507
DO8 scaling span
-100.0 - +100.0
1000
40508
DO8 proportion cycle
1-120
1
40509
INP-TN5A2052-E
5-75
5.6 Setting/Monitor Area Entry Numbers (Event module)
Contents
Reading out/Writing data setting
range
Factory-set
value
Register No.
DO8 output limit (lower)
0.0 - 100.0
0
40510
DO8 output limit (upper)
0.0 - 100.0
1000
40511
DO8 limit type
0-3
0
40512
Entry
ban
Communication parameters
Contents
Reading out/Writing data setting
range
Factory-set
value
Register No.
Entry
ban
RS-485 parity setting
0: None
1: Odd
2: Even
0
40111
*
RS-485 response interval time
0 to 25 (1digit/20ms)
1
40113
RS-485 communication permission
0: Ready only
1: Read/Write
1
40114
*
*
RS-485 communication speed
0: 9.6kbps
1: 19.2kbps
2: 38.4kbps
3: Forbidden
4: 115.2kbps
1
40115
*
Enhanced communication module (PUMC)
connection permission
0
0: PUMC not connected
(RS-485 Enable)
1: PUMC connected (RS-485 Disable)
40116
*
Configuration parameters
Contents
Reading out/Writing data setting
range
Factory-set
Register No.
value
FAULT output 1 set value
0: HOLD
1: OFF
0
40260
Standby output set value
0000-FFFF
0
40268
Standby mode setting
0: DI=input value
DO= Standby output set value
1: DI=All OFF
DO=Standby output set value
0
40270
LED2 Lamp configuration
0-2
1
40222
5-76
Entry
ban
*
INP-TN5A2052-E
5.6 Setting/Monitor Area Entry Numbers (Event module)
Monitor parameters
Note
Monitor parameter can be entered to the monitor area only. Do not enter it to the setting area.
Contents
Reading out/Writing data setting
range
Factory-set
value
Register No.
Digital output calculated result monitor
0000 - FFFF
-
31002
Digital input calculated result monitor
0000 - FFFF
-
31001
Digital input terminal monitor
0000 - FFFF
-
31003
Entry
ban
Internal DO data area
Contents
Reading out/Writing data setting
range
Factory-set
Register No.
value
0
41001
0
41002
0
41003
0
41004
Internal DO data area 5
0
41005
Internal DO data area 6
0
41006
Internal DO data area 7
0
41007
Internal DO data area 8
0
41008
Internal DO data area 9
0
41009
Internal DO data area 10
0
41010
Internal DO data area 11
0
41011
Internal DO data area 12
0
41012
Internal DO data area 13
0
41013
Internal DO data area 14
0
41014
Internal DO data area 15
0
41015
Internal DO data area 16
0
41016
Internal DO data area 1
Internal DO data area 2
Internal DO data area 3
Internal DO data area 4
INP-TN5A2052-E
Event output
1: ON
2: OFF
Control output
0.00 to 100.00
Entry
ban
5-77
5.7 Setting/Monitor Area Entry Numbers (Analog module)
5.7 Setting/Monitor Area Entry
Numbers (Analog module)
The table below shows the register numbers of an analog module, which are settable to each parameter of "Setting/Monitor
area entry St. No." and "Setting/Monitor area entry register No." of a programless communication module.
Note
Parameters marked "*" in the "Entry ban" column in the table can not be changed via programless communication modules.
Do not set them to each parameter of "Setting/Monitor area entry St. No." and "Setting/Monitor area entry register No."
Operation parameters
Contents
Readout/Write data
setting range
Depends
on input
range
Factoryset
value
Register Register Register Register
No. 1
No. 2
No. 3
No. 4
(Ch1)
(Ch2)
(Ch3)
(Ch4)
Entry
ban
Aio Ai Ao
RUN/Standby SW
0: RUN
1: Standby
0 (RUN)
40017
41004
40018
42004
40019
43004
40020
44004
  
Internal analog
output field
-327.6 to 327.6%
0
40251
40252
40253
40254
 Í 
Digital output latch
release command
0: OFF
1: Release latch
0 (OFF)
41031
42031
43031
44031
  Í
ALM1 set value 1
-100 to 100% FS

2.5% FS
41033
42033
43033
44033
ALM1 set value 2
-100 to 100% FS

2.5% FS
41034
42034
43034
44034
ALM2 set value 1
-100 to 100% FS

2.5% FS
41041
42041
43041
44041
ALM2 set value 2
-100 to 100% FS

2.5% FS
41042
42042
43042
44042
ALM3 set value 1
-100 to 100% FS

2.5% FS
41049
42049
43049
44049
ALM3 set value 2
-100 to 100% FS

2.5% FS
41050
42050
43050
44050
ALM4 set value 1
-100 to 100% FS

2.5% FS
41057
42057
43057
44057
ALM4 set value 2
-100 to 100% FS

2.5% FS
41058
42058
43058
44058
ALM5 set value 1
-100 to 100% FS

2.5% FS
41065
42065
43065
44065
ALM5 set value 2
-100 to 100% FS

2.5% FS
41066
42066
43066
44066
5-78
INP-TN5A2052-E
5.7 Setting/Monitor Area Entry Numbers (Analog module)
Setup parameters
Contents
Readout/Write data
setting range
Depends
on input
range
Factoryset
value
Register Register Register Register
No. 1
No. 2
No. 3
No. 4
(Ch1)
(Ch2)
(Ch3)
(Ch4)
Entry
ban
Aio Ai Ao
  Í
Analog input type
0: JPt100(0 to 150°C)
1: JPt100(-150 to 600°C)
2: Pt100(0 to 150°C)
3: Pt100(-150 to 300°C)
4: Pt100(-150 to 850°C)
5: J(0 to 400°C)
6: J(0 to 800°C)
7: K(0 to 400°C)
8: K(0 to 800°C)
9: K(0 to 1200°C)
10: R(0 to 1600°C)
11: B(0 to 1800°C)
12: S(0 to 1600°C)
13: T(-199 to 400°C)
14: E(-199 to 800°C)
18: N(0 to 1300°C)
19: PL-2(0 to 1300°C)
21: Voltage (0 to 5V)
22: Voltage (1 to 5V)
23: Voltage (0 to 10V)
24: Voltage (2 to 10V)
7(TC/Pt)
22(VI)
40151
41029
40152
42029
40153
43029
40154
44029
*
Analog input scale
lower
-1999 to 9999
0% FS
41212
42212
43212
44212
*
Analog input scale
upper
-1999 to 9999
100% FS
41213
42213
43213
44213
*
Decimal place
0: No decimal point
1: One decimal place
2: Two decimal places
0 (TC/Pt)
1 (VI)
41214
42214
43214
44214
*
Temperature unit
0: Degree C
1: Not selectable
0 (°C)
41215
42215
43215
44215
*
Analog input shift
-10 to 10% FS
0
41216
42216
43216
44216
Analog input filter
0.0 to 120.0sec
2.0
41220
42220
43220
44220
Analog input
display
zero adjustment
-50 to 50% FS

0
41221
42221
43221
44221
Analog input
display
span adjustment
-50 to 50% FS

0
41222
42222
43222
44222
Cold junction
compensation
0: OFF
1: ON
1 (ON)
41223
42223
43223
44223
Analog output lower -25.0 to 125.0%
limit
-3.0
41255
42255
43255
44255
Analog output
upper limit
-25.0 to 125.0%
103.0
41256
42256
43256
44256
Standby analog
output set value
-3.0 to 103.0%
-3.0
41268
42268
43268
44268
INP-TN5A2052-E

 Í 
5-79
5.7 Setting/Monitor Area Entry Numbers (Analog module)
Contents
Readout/Write data
setting range
Depends
on input
range
Factoryset
value
Register Register Register Register
No. 1
No. 2
No. 3
No. 4
(Ch1)
(Ch2)
(Ch3)
(Ch4)
Entry
ban
Standby mode
setting
0: ALM=OFF
1: ALM=ON
0
41270
42270
43270
44270
Linkage operation
master St. No.
0 to 255
0
41536
42536
43536
44536
*
Linkage operation
master Ch. No
1 to 4
Each Ch.
41537
42537
43537
44537
*
5-80
Aio Ai Ao
  Í
  
INP-TN5A2052-E
5.7 Setting/Monitor Area Entry Numbers (Analog module)
System parameters
Contents
Readout/Write data
setting range
Depends
on input
range
Factoryset
value
Register Register Register Register
Entry
No. 1
No. 2
No. 3
No. 4
Aio Ai Ao
ban
(Ch1)
(Ch2)
(Ch3)
(Ch4)
Current output range 4: 0 to 20mA
5: 4 to 20mA
5
(4-20mA)
40166
41801
40167
42801
40168
43801
40169
44801
Output type
0: Ai of own station
1: Output 0%
2: Output 0%
3: Output 0%
4: Internal analog output
field
5: PV of other St.
6: SV of other St.
7: MV of other St.
3
(output
0%)
40171
41803
40177
42803
40183
43803
40189
44803
Output master St.
0 to 255 stations
0
40172
41804
40178
42804
40184
43804
40190
44804
*
Output master Ch.
1 to 4Ch
Each Ch.
40173
41805
40179
42805
40185
43805
40191
44805
*
Output scaling base
-100.0 to 100.0%
0.0
40175
41807
40181
42807
40187
43807
40193
44807
Output scaling span
-100.0 to 1000.0
100.0
40174
41806
40180
42806
40186
43806
40192
44806
Output shutdown
0000 to 1111
bit 0 : Output 1 shutdown
bit 1 : Output 2 shutdown
bit 2 : Output 3 shutdown
bit 3 : Output 4 shutdown
0000
DI-1 function select
0: No function
1: RUN/Standby SW
2: No function
3: No function
4: No function
5: No function
6: No function
7: No function
8: No function
9: No function
10: No function
11: No function
12: No function
13: No function
14: No function
15: No function
16: No function
17: Latch release (all)
18: Latch release (DO1)
19: Latch release (DO2)
20: Latch release (DO3)
21: Latch release (DO4)
22: Latch release (DO5)
23: No function
0
INP-TN5A2052-E
 Í 
40201
41013
42013
43013
44013
  
5-81
5.7 Setting/Monitor Area Entry Numbers (Analog module)
Contents
Readout/Write data
setting range
Depends
on input
range
Factoryset
value
Register Register Register Register
Entry
No. 1
No. 2
No. 3
No. 4
Aio Ai Ao
ban
(Ch1)
(Ch2)
(Ch3)
(Ch4)
DI-1 function select
24: No function
25: No function
26: Start timer(DO1)
27: Start timer(DO2)
28: Start timer(DO3)
29: Start timer(DO4)
30: Start timer(DO5)
31: No function
32: No function
33: No function
34: No function
35: No function
36: No function
37: No function
38: No function
39: No function
40: No function
41: No function
42: No function
43: No function
44: No function
45: No function
46: No function
47: No function
48: No function
49: Output 1 shutdown
50: Output 2 shutdown
51: Output 3 shutdown
52: Output 4 shutdown
0
41013
42013
43013
44013
DI-2 function select
0 to 52
0
41014
42014
43014
44014
DI-3 function select
0 to 52
0
41015
42015
43015
44015
DI-4 function select
0 to 52
0
41016
42016
43016
44016
DI-5 function select
0 to 52
0
41017
42017
43017
44017
DI-6 function select
0 to 52
0
41018
42018
43018
44018
DI-7 function select
0 to 52
0
41019
42019
43019
44019
DI-8 function select
0 to 52
0
41020
42020
43020
44020
DI-9 function select
0 to 52
0
41021
42021
43021
44021
DI-10 function select 0 to 52
0
41022
42022
43022
44022
DI-11 function select
0 to 52
0
41023
42023
43023
44023
DI-12 function select 0 to 52
0
41024
42024
43024
44024
DI-13 function select 0 to 52
0
41025
42025
43025
44025
DI-14 function select 0 to 52
0
41026
42026
43026
44026
DI-15 function select 0 to 52
0
41027
42027
43027
44027
DI-16 function select 0 to 52
0
41028
42028
43028
44028
DI master St. setting
0
41011
42011
43011
44011
5-82
0 to 255
  
*
INP-TN5A2052-E
5.7 Setting/Monitor Area Entry Numbers (Analog module)
Contents
Readout/Write data
setting range
Depends
on input
range
Factoryset
value
Register Register Register Register
Entry
No. 1
No. 2
No. 3
No. 4
Aio Ai Ao
ban
(Ch1)
(Ch2)
(Ch3)
(Ch4)
DO 1 output event
type setting
0-102
0
41032
42032
43032
44032
DO1 option function
setting
0000 to 1111
bit 0 :Alarm latch function
bit 1 :Error input alarm
function
bit 2 :Non-excitation
output function
bit 3 :Hold reset function
0000
41036
42036
43036
44036
DO2 output event
type setting
0-102
0
41040
42040
43040
44040
DO2 option function
setting
0000 to 1111
bit 0 :Alarm latch function
bit 1 :Error input alarm
function
bit 2 :Non-excitation
output function
bit 3 :Hold reset function
0000
41044
42044
43044
44044
DO3 output event
type setting
0-102
0
41048
42048
43048
44048
DO3 option function
setting
0000 to 1111
bit 0 :Alarm latch function
bit 1 :Error input alarm
function
bit 2 :Non-excitation
output function
bit 3 :Hold reset function
0000
41052
42052
43052
44052
DO4 output event
type setting
0-102
0
41056
42056
43056
44056
DO4 option function
setting
0000 to 1111
bit 0 :Alarm latch function
bit 1 :Error input alarm
function
bit 2 :Non-excitation
output function
bit 3 :Hold reset function
0000
41060
42060
43060
44060
DO5 output event
type setting
0-102
0
41064
42064
43064
44064
DO5 option function
setting
0000 to 1111
bit 0 :Alarm latch function
bit 1 :Error input alarm
function
bit 2 :Non-excitation
output function
bit 3 :Hold reset function
0000
41068
42068
43068
44068
Mode at startup
0: Auto mode
1: Standby
2: Standby
3: Standby
0 (Auto)
41304
42304
43304
44304
INP-TN5A2052-E
*
  Í
*
*
*
*
*
  
5-83
5.7 Setting/Monitor Area Entry Numbers (Analog module)
Alarm parameter
Contents
Readout/Write data
setting range
ALM1 hysteresis
0 to 50% FS
ALM1 delay time
Depends
on input
range
Factoryset
value
Register Register Register Register
No. 1
No. 2
No. 3
No. 4
(Ch1)
(Ch2)
(Ch3)
(Ch4)
0.25% FS 41035
42035
43035
44035
0 to 99 min. 59sec.
/0 to 99hr. 59min.
0
41037
42037
43037
44037
ALM1 delay time units
0: sec.
1: min.
0
(Second)
41038
42038
43038
44038
ALM2 hysteresis
0 to 50% FS
0.25% FS 41043
42043
43043
44043
ALM2 delay time
0 to 99 min. 59sec.
/0 to 99hr. 59min.
0
41045
42045
43045
44045
ALM2 delay time units
0: sec.
1: min.
0
(Second)
41046
42046
43046
44046
ALM3 hysteresis
0 to 50% FS
0.25% FS 41051
42051
43051
44051
ALM3 delay time
0 to 99 min. 59sec.
/0 to 99hr. 59min.
0
41053
42053
43053
44053
ALM3 delay time units
0: sec.
1: min.
0
(Second)
41054
42054
43054
44054
ALM4 hysteresis
0 to 50% FS
0.25% FS 41059
42059
43059
44059
ALM4 delay time
0 to 99 min. 59sec.
/0 to 99hr. 59min.
0
41061
42061
43061
44061
ALM4 delay time units
0: sec.
1: min.
0
(Second)
41062
42062
43062
44062
ALM5 hysteresis
0 to 50% FS
0.25% FS 41067
42067
43067
44067
ALM5 delay time
0 to 99 min. 59sec.
/0 to 99hr. 59min.
0
41069
42069
43069
44069
ALM5 delay time units
0: sec.
1: min.
0
(Second)
41070
42070
43070
44070
Object Ch. No. for
interchannel ALM1
1 to 4
1
41039
42039
43039
44039
Object Ch. No. for
interchannel ALM2
1 to 4
1
41047
42047
43047
44047
Object Ch. No. for
interchannel ALM3
1 to 4
1
41055
42055
43055
44055
Object Ch. No. for
interchannel ALM4
1 to 4
1
41063
42063
43063
44063
Object Ch. No. for
interchannel ALM5
1 to 4
1
41071
42071
43071
44071
5-84





Entry
ban
Aio Ai Ao
  Í
INP-TN5A2052-E
1 Overview
Loader Communication Functions… …… 6-3
6.2
Loader Communication Specifications…
6.3
Loader Connection… ……………………… 6-5
6.4
Setting Loader Communication Parameters…… 6-6
6.5
MODBUS Communication Protocol……… 6-7
6.6
Command and Transmission Frame Details…… 6-15
3 Installation
6.1
2 System Configuration Example
6
Loader
Communications
6-4
4 System Configuration
5 Communications
6 Loader Communications
7 Trouble Shooting
INP-TN5A2052-E
6-1
6.1 Loader Communication Functions
6-2
INP-TN5A2052-E
6.1 Loader Communication Functions
6.1 Loader Communication Functions
The equipment equipped with communication functions via the loader interface, which enables data exchange to such devices
as PC.
The communication system composed of the one to one communication between a master (such as, personal computer) and a
slave (the equipment).
Note
●● The system constructed with the equipment as slaves do not respond to messages issued by the master with broadcast queries
are where the station number is “0”.
●● Communications with a loader interface should not be performed during production operation.
●● The equipment can not perform communication to a programless communication module with it connected to a loader port on the
control module.
The sending/receiving data format should be same to perform communication between a master and a slave. The
communication data format by the MODBUS protocol is explained in this manual.
When performing the loader communication, connect an optional loader connecting cable (RS-232C, Type: PUMZ*L01) to the
front face loader communication port of the main unit in order to perform RS-232 communication to the personal computer.
Connection with PC
Personal Computer
RS-232C
PUM-C
LOADER
PWR
BUS
LINK
TX/RX
PUM series
Ethernet
INP-TN5A2052-E
6-3
6.1 Loader Communication Functions
6.2 Loader Communication Specifications
Loader interface
Item
Specifications
Electrical specifications
EIA RS232C
Transmission method
3-wire system, half duplex serial
Synchronous method
Asynchronous
Connection mode
1:1
Station number
128
Communication speed
19.2kbps (fixed)
Data format
Data length
8 bits
Stop bit
1 bits
Parity
None (fixed)
Transmission code
HEX value (MODBUS RTU mode)
Error detection
CRC-16
Insulation
No insulation with the internal circuit
6-4
INP-TN5A2052-E
6.3 Loader Connection
6.3 Loader Connection
Warning
DO NOT TURN THE POWER ON UNTIL ALL OF THE WIRING IS COMPLETED.
THERE IS A RISK OF ELECTRICAL SHOCK OR DAMAGE.
Communication terminal
Loader communication port
Loader connecting cable
PUM-C
LOADER
PWR
BUS
LINK
TX/RX
Connection with a loader communication port
•• Use an optional loader connecting cable (RS-232C).
Loader connecting cable
(RS-232C)
PUMZ*L01
Master
RS-232C
PUM-C
LOADER
PC etc.
PWR
BUS
LINK
D-Sub 9-pin
INP-TN5A2052-E
TX/RX
6-5
6.4 Setting Loader Communication Parameters
6.4 Setting Loader Communication
Parameters
In order to perform communication between the master and the equipment properly, the setting below is necessary.
•• All communication conditions settings for both of the master and the equipment should be the same.
Setting items for loader interface (The equipment)
Items
Setting range
Factory-set value
The value is fixed regardless of the
setting of St. No. configuration SW.
Station No.
128
Communication speed setting
19.2kbps (Fixed)
―
Not changeable
Data length
8 bits
―
Not changeable
Parity
None
―
Not changeable
6-6
128
Remarks column
INP-TN5A2052-E
6.5 MODBUS Communication Protocol
6.5 MODBUS Communication Protocol
The communication system with MODBUS protocol always performs communication by using the procedure that “the master
sends a command message first, and the applicable slave sends a response message back”.
Communication procedure is shown in the flow chart below.
The master sends a command message to
the slave.
The slave checks if the station number in
the received message is the same as its
own number.
When it is the same
The slave runs a command, and sends the
response message.
INP-TN5A2052-E
When it is not the same
The slave throws out the message received,
and waits for the next message (No reply).
6-7
6.5 MODBUS Communication Protocol
When the station number in the command massage received
is the same as its own number.
Master
Slave
Command message
When the station No.
is the same
Response message
When the station number in the command message received
is not the same as its own number.
Master
Slave
Command message
When the station No.
is not the same
6-8
INP-TN5A2052-E
6.5 MODBUS Communication Protocol
Message composition
Command messages are composed of four parts; a station number, a function code, a data part, and an error check code, and
sent them in the order above.
Field Name
Number of Bytes
Station No.
1 byte
Function code
1 byte
Data part
2 to 64 bytes
Error check code (CRC-16)
2 bytes
Station No.
This is the number allocated to a slave. It is fixed to “128”.
Function code
This code specifies the function for the slave to perform.
Data part
These data is required to run the function code. The composition of the data part varies according to function codes. Coil number
or register number is allocated to the data in the temperature controller, and specify those numbers to read out/write through
communications.
The coil number or the register number in messages uses relative addresses.
The relative address is calculated using the formula below.
Relative address = (The last 4 digits of a coil No. / register No.) -1
Ex.) When a function code specifies a register number “40003”
Relative address= (The last 4 digits of 40003) – 1
= 0002
is used in the message.
Error check code
This code is for detecting the message error (changes in the bits) during the signal transmission process. MODBUS protocol
mode (RTU mode) uses CRC-16 (Cyclic Redundancy Check).
INP-TN5A2052-E
6-9
6.5 MODBUS Communication Protocol
Slave response
•• Normal slave response
A slave creates and replies the response message to each command message. The slave response message uses the same
format as the command message. Contents inside the data part vary according to function codes.
•• Irregular slave response
If there are problems (such as specification of a nonexistent function code) with the contents of command messages other
than transmission error, a slave creates and sends back an error response message without running the command.
The composition of an error response message is as follows. The function code uses the value that the function code of the
command message plus 80H.
Field Name
Number of Bytes
Station No.
1 byte
Function Code + 80H
1 byte
Error Code
1 byte
Error Check Code (CRC-16)
2 bytes
The error codes are shown below.
Error Code
Contents
Explanation
01H
Function code failure
A nonexistent function code was specified. Check the
function code.
02H
Address failure for coil/register
The specified relative address for the coil No. /the register
No. cannot be used by the specified function code.
03H
Coil/register/limit failure
The specified number of words is too many and specifies
the range that does not contain the coil No./register No.
The specified data is specified beyond the limit.
06H
Busy state
Data is been writing in the register. Retrying
communication after more than 100- sec interval.
•• No slave response
In the following cases, a slave ignores the command message, and send the response message back neither.
•• In the case that the station number specified by the command message is not the same as the station number specified for
a slave.
•• In the case that the error check code does not correspond or the transmission error (such as parity error) is detected.
•• In the case that the interval between the message composing data is 24 bit time or more.
6-10
INP-TN5A2052-E
6.5 MODBUS Communication Protocol
Function code
With MODBUS protocol, the different coil number/register number is allocated depends on the function code, and each function
code is only available for a certain coil number/register number.
The diagram below is shown the correspondence between the function code and the coil number/register number.
Function code
Code
Coil / Register No.
Function
Target
No.
Contents
03H
Read out (continuous)
Hold register
3xxxx
Read out word data
04H
Read out (continuous)
Input register
4xxxx
Read out/Write word data
06H
Write
Hold register
10H
Write (continuous)
Hold register
The message length on the each function is shown below.
Code
Contents
Number of
allocatable data
Command message
Response message
Minimum
Maximum
Minimum
Maximum
03H
Read word data
125 words*
8 bytes
8 bytes
7 bytes
69 bytes
04H
Read out word data (Read out
only)
125 words*
8 bytes
8 bytes
7 bytes
69 bytes
06H
Write word data
1 word
8 bytes
8 bytes
8 bytes
8 bytes
10H
Write series of word data
123 words*
11 bytes
73 bytes
8 bytes
8 bytes
*: “Number of allocatable data” above is limited by the number of data that the equipment allocates for the coil/address number.
(Excluding the function code 06H)
INP-TN5A2052-E
6-11
6.5 MODBUS Communication Protocol
Error check code (CRC-16) calculation
CRC-16 is 2-byte (16-bit) error check code. The calculating range is the starting position of the message (station number) to the
end of the data part.
A slave calculates the CRC of the message received, and does not send the response message back, if the result is not the
same as the CRC code received.
The flow for CRC-16 calculation is as below.
Start
Set FFFFH (hexadecimal) to CR
Set J=1
Variables
CR: CRC error check data (2 bytes)
J: command message calculation
character digit
K: The number of times to check
CR calculation
Exclusive OR (XDR) is run on each character of J (1 byte)
an in specified message and CR, and that result is set to CR.
Set K=1
Is the bit at
the right end of
the CR 1?
NO
YES
After CR has been justified 1 bit to right, A001H and
exclusive OR (XDR) are run, and that result is set to CR.
Justify CR 1 bit
to right
Add 1 to K
NO
Have 8-time
calculations
completed?
YES
Add 1 to J
NO
Has the all characters’
calculation complete?
YES
Completed
6-12
(Calculate in order of command
message station No., function code
and data.)
CR calculation result is added to
at the end of command message
in order of LOW, HIGH.
INP-TN5A2052-E
6.5 MODBUS Communication Protocol
Transmission control procedure
Master communication method
Master should start communication following the rules below.
1. Provide more than 48-bit time blank state before sending the command message.
2. The interval between the sent messages should be less than 24 bit times.
3. The master will be in the receiving standby mode within 24 bit time after sending the command message.
4. Provide blank state more than 48 bit time prior to sending the next message after receiving the response message. (the
same as the 1st rule)
5. For safety, create the framework where the master checks the response message, and if there is no response or errors
occur, retry at least 3 times.
Note
The definition above is the minimum required value. For safety, creating the master side program with providing margins 2 to 3
times as large is recommended. For a concrete example, creating the blank state (the 1st rule above) more than 10ms, the interval
between bytes (the 2nd rule above) and switching from sending to receiving (the 3rd rule) within 1ms for 19.2kbps is recommended.
Frame detection
There are 2 states with the circuit as below.
•• Blank state (no data on the circuit)
•• Communication state (data running on the circuit)
The equipment connected on the circuit is in the receiving state first and monitors the circuit. When the blank state more than 24
bit time appears, it detects the end of the previous frame and will be in the receiving standby mode within the next 24 bit time.
When data appears on the circuit, it begins receiving and when the blank state more than 24 bit appears again, it detects the
end of the frame. In other words, the data appears on the circuit during appearance of the first blank state more than 24 bit time
to the next blank state more than 24 bit time is loaded as one frame (a bundle of data). Therefore, one frame should be sent
following the rules below.
•• Provide the blank state more than 48 bit time before sending the command message.
•• The interval between bytes of the message sent should be less than 24 bit time.
INP-TN5A2052-E
6-13
6.5 MODBUS Communication Protocol
The equipment response
The equipment, after detected the frame (detection of the blank state more than 24 bit time), runs that frame as the command
message. In the case the frame message is for the own station, the equipment send the response message back; it takes about
1 to 30 ms for this operation. (How long it takes is depends on the contents of the command message.) Therefore, the master,
after sending the command message, should follow the rules shown below
•• After sending the command message, the master will be in the receiving standby mode within 24 bit time.
Master
Slave
POL1
1 to 30 mms
More than 5ms interval
Is necessary
(More than 10ms is
recommended)
POL1 response data
POL2
1 to 30 mms
POL2 response data
6-14
INP-TN5A2052-E
6.6 Command and Transmission Frame Details
6.6 Command and Transmission
Frame Details
Reading data
Reading Word Data (Function Code: 03H)
The unit reads word data continuously for the specified number of words from the first number to start reading from.
The slave forwards the read word data from the upper number of bytes to the lower number.
Note
●● When reading out word data continuously, specification beyond the range of the relative address will result in no response.
●● Do not write data to the number not listed on the MODBUS register numbers. (It might cause the equipment's abnormal
operation.)
Function code
03H
Number of readable words in one message
125
INP-TN5A2052-E
6-15
6.6 Command and Transmission Frame Details
•• Message composition
Master
Slave
Command composition (Byte)
Response message composition (Byte)
Station No.
Station No.
Function code
Function code
Number to start reading Upper
out (Relative address)
Lower
Number of bytes to read out
(Number of words to read out ×2)
Upper
Number of words to
read out (1 to 32 words) Lower
First word data
contents
Upper
Lower
Next word data
contents
Upper
Last word data
contents
Upper
CRC data
Upper
CRC data
The meaning of read out word
MSB
Lower
Lower
Lower
Lower
Upper
LSB
First word data contents upper byte
First word data contents lower byte
Next word data contents upper byte
Next word data contents lower byte
Last word data contents upper byte
Last word data contents lower byte
6-16
INP-TN5A2052-E
6.6 Command and Transmission Frame Details
•• Example of message transmission
When reading out the set value of “Device Type of Setting Area” from a programless communication module, the message
composition is as follows.
•• “Device type of the setting area” relative address: 000Ah
Master
Slave
Command message (Byte)
Station No.
80H
Response Message (Byte)
Function code
03H
Station No.
80H
Number to start
reading out
(Relative address)
Upper
00H
Function code
03H
Lower
0AH
Number of bytes to read out
02H
Number of words
to read out
Upper
00H
First word data
contents
CRC data
Lower
01H
Lower
BAH
Upper
19H
CRC data
Upper
00H
Lower
A8H
Lower
85H
Upper
E4H
The meaning of read out data
Device type of the setting area= 00A8h (Data register)
INP-TN5A2052-E
6-17
6.6 Command and Transmission Frame Details
Reading out read-only word data (Function code: 04H)
The equipment reads out the word data specified by the number of words to read out continuously from the number to start
reading out.
A slave sends the read out data in order of the upper bytes, the lower bytes.
Function code
04H
Max. number of readable words in one message
125
Relative address
0000H to OFDCH
Register No.
30001 to 34061
•• Message composition
Master
Slave
Command composition (Byte)
Response message composition (Byte)
Station No.
Station No.
Function code
Function code
Number to start reading Upper
out (Relative address)
Lower
Number of bytes to read out
(Number of word to read out ×2)
Upper
Number of words to
read out (1 to 15 words) Lower
First word data
contents
Upper
Lower
Next word data
contents
Upper
Last word data
contents
Upper
CRC data
Upper
CRC data
The meaning of reading out word data
MSB
Lower
Lower
Lower
Lower
Upper
LSB
First word data contents upper byte
First word data contents lower byte
Next word data contents upper byte
Next word data contents lower byte
Last word data contents upper byte
Last word data contents lower byte
6-18
INP-TN5A2052-E
6.6 Command and Transmission Frame Details
•• Example of message transmission
When reading out “PLC inter-cycle time monitor” from the programless communication module, the message composition is
as follows.
•• “PLC inter-cycle time monitor” relative address: 03EEh
Master
Slave
Command message (Byte)
Station No.
80H
Function code
Response message (Byte)
04H
Station No.
80H
Number to start
reading out
(Relative address)
Upper
03H
Function code
04H
Lower
EEH
Number of bytes to read out
02H
Number of words
to read out
Upper
00H
Lower
01H
First word data
contents
CRC data
Lower
4FH
Upper
AAH
CRC data
Upper
00H
Lower
32H
Lower
04H
Upper
FBH
The meaning of read out data
PLC inter-cycle time monitor = 50ms
INP-TN5A2052-E
6-19
6.6 Command and Transmission Frame Details
Writing data
Writing word Data (1 word, function code: 06H)
This writes the specified data to the specified number for word data. The master sends the data to be written from the upper
number of bytes to the lower number.
Function code
06H
Max. number of readable words in one message
1
•• Message composition
Master
Slave
Command message composition (Byte)
Station No.
Response message composition (Byte)
Function code
Station No.
Number to specify writing
(Relative address)
Write word data
CRC data
6-20
Upper
Function code
Lower
Number to specify writing
(Relative address)
Upper
Lower
Lower
Upper
Write word data
CRC data
Upper
Lower
Upper
Lower
Lower
Upper
INP-TN5A2052-E
6.6 Command and Transmission Frame Details
•• Example of message transmission
This example shows when setting “Setting Area Device Size” for the programless communication module to 500 (01F4h).
•• “Setting Area Device Size” relative address: 000Dh
Master
Slave
Command message (Byte)
Station No.
Function code
Number to specify writing
(Relative address)
Write word data
CRC data
INP-TN5A2052-E
80H
Response message (Byte)
06H
Station No.
80H
Upper
00H
Function code
06H
Lower
0DH
Number to specify writing
(Relative address)
Upper
01H
Lower
F4H
Lower
06H
Upper
0FH
Write word data
CRC data
Upper
00H
Lower
0DH
Upper
01H
Lower
F4H
Lower
06H
Upper
0FH
6-21
6.6 Command and Transmission Frame Details
Write series of words (Function code: 10H)
Write how long it takes to write words and the series of word information beginning from the start writing number.
The master sent the writing word data in order of the upper, the lower.
Function code
10H
Max. number of readable words in one message
123
•• Message composition
Master
Slave
Command message composition (Byte)
Station No.
Function code
Response message composition (Byte)
Number to start write
(Relative address)
Upper
Station No.
Lower
Function code
Number of word to
write
Upper
Lower
Number of byte to write
First write word data
Next write word data
Last write word data
CRC data
}
}
1 to 32
Number to start write
(Relative address)
Upper
Number of word
to write ×2
Number of word to
write
Upper
Upper
CRC data
Lower
Lower
Lower
Lower
Upper
Upper
Lower
Upper
Lower
Lower
Upper
Meaning of write word data
MSB
LSB
First word data contents upper byte
First word data contents lower byte
Next word data contents upper byte
Next word data contents lower byte
Last word data contents upper byte
Last word data contents lower byte
6-22
INP-TN5A2052-E
6.6 Command and Transmission Frame Details
•• Example of message transmission
This example shows when setting 1000 (03E8h) to "Setting Area Start Address (Lower, Upper)" of the programless
communication module.
•• Setting area start address (Lower) = 1000 (=03EBh)
•• Setting area start address (Upper) = 0 (=0000h)
•• “Setting area start address (Lower)” relative address: 000Ch
Master
Slave
Command message composition (Byte)
Station No.
80H
Response message composition
(Byte)
Function code
10H
Station No.
80H
Function code
10H
Number to specify
writing
(Relative address)
Write word data
Upper
Lower
0BH
Upper
00H
Lower
02H
Number of byte to write
First write word data
Last write word data
CRC data
INP-TN5A2052-E
00H
04H
Upper
03H
Lower
E8H
Upper
00H
Lower
00H
Lower
9FH
Upper
52H
Number to specify
writing
(Relative address)
Number of word to write
CRC data
Upper
00H
Lower
0BH
Upper
00H
Lower
02H
Lower
2EH
Upper
1BH
6-23
1 Overview
2 System Configuration Example
3 Installation
Error Procedure……………………………… 7-3
7.1
4 System Configuration
5 Communications
6 Loader Communications
7 Trouble Shooting
7-1
INP-TN5A2052-E
Trouble Shooting
7
7.1 Error Procedure
7-2
INP-TN5A2052-E
7.1 Error Procedure
7.1 Error Procedure
Troubles during operation
If troubles occur during operation, check the type of your module, its connection and parameter setting for any abnormalities.
Refer to the user’s manual for Micrex-SX on the problem related to Micrex-SX.
The dialog below shows the typical troubles and the solutions for them.
Troubles
PWR indicator: No light
(even if turning the power ON)
PWR indicator: RED light
PWR indicator: RED blinking
(1-sec interval)
PWR indicator: RED blinking
(0.5-sec interval)
INP-TN5A2052-E
Causes
Solutions
No power supply to the main unit
Check the power supply wiring is installed.
Supply voltage is out of the allowable
range.
Use the power supply conforming to the
main unit specifications.
Main unit failure
Replace the module.
No corresponding Micrex-SX exist
on LAN, despite programless
communication is selected as
connection method.
Install Micrex-SX in LAN.
Wrong IP address for Micrex-SX.
Check the set value for the target SX IP
address (1) and (2).
Wrong set value for connection
method between LAN and SX.
Check the set value for SX connection
method.
Wrong ID for target Micrex-SX.
Set the value for SX connection ID (L)/(H)
to match Micrex-SX.
Invalid value for parameter registered
with PLC module.
Check the error code of “parameter
setting error”. Correct the set value for the
parameter using PUM parameter loader,
and then restart.
Invalid switch setting.
Check the error code of “parameter setting
error”. Correct the setting, and then restart.
Communication with other PUM
series connected to PUMCE
interrupted.
Check that all the PUM series are properly
connected with connectors.
One or some of the PUM series
connected to PUMCE restarted.
Restart PUMCE.
7-3
7.1 Error Procedure
Troubles
PWR indicator: GREEN blinking
(1-sec interval)
Causes
Solutions
None of the PUM series connected to
PUMCE recognized.
Change the set value for “connection
permission of enhanced communication
module” parameter of the PUM series to
“PUMC connected”, and then restart.
Check that all the PUM series are properly
connected with connectors.
PWR indicator: GREEN blinking
(0.5-sec interval)
Under the process of initial polling.
Please wait until the process is complete.
Duplicate IP address with other
device.
Modify the IP address setting not to be
duplicated with other device.
Wrong target IP address.
Check the IP address of PUMCE.
Ethernet cable disconnected.
Connect the Ethernet cable.
Too large communication load for
LAN
Avoid installing the devices on LAN that
always use a large amount of data.
Communication failure with PUMCE
installed across a router.
Default gateway not configured.
Set the IP addresses for default gateway
(1) and (2) to that of the router to which
PUMCE is connected.
Communication failure with the
station No. 128 (PUMCE) during
bridge communication.
PUMCE parameters cannot be read
or written in bridge communication.
Be sure not to read or write PUMCE
parameters in bridge communication.
No response from PUM series other
than station No. 128 during mapping
communication.
Only PUMCE (station No.128) among
PUM series can be accessed in
mapping communication.
Be sure not to access any PUM series
except PUMCE in mapping communication.
Monitor area response flag shows
abnormal response status (in the
8000hs) during programless
communication.
Invalid value was written to the
control/analog/event module.
Correct the value set for the setting area
data field.
Programless communication is
in a stop state (Command setting
response flag "EEEEh" or "FFFFh").
Demand the communication restoration by
using the Command setting demand flag in
Micrex-SX setting area.
Inter-module connection failure.
Check the inter-module connection.
The unit failure
Replace the module.
Communication failure with PUMCE
Data in the all modules cannot be
readout during programless
communication
(Even if set the Reading demand
flag and Parameter setting demand
flag for PLC setting area, data
cannot be readout).
7-4
INP-TN5A2052-E
7.1 Error Procedure
Troubles during loader connection
The diagram below shows the list of the cases frequently occurs and their solution.
Refer to the parameter loader user's manual as well.
Troubles
Causes
Solutions
Connection error to the parameter
loader for PUM
Check the connection status of the
parameter loader connecting cable for
PUM. Check if there is any connecting
cable break.
Check if the assembly of the parameter
loader connecting cable for PUM correct.
No connection to the PUM
parameter loader is possible.
Parameter change is not possible.
INP-TN5A2052-E
Communication conditions mismatch
Check such as communication speed set
value, parity set value.
Wrong host
Check that the parameter loader connecting
cable for PUM is connected to the loader
port of the Ethernet communication module.
Attempting the parameter input value
writes the value out of the setting
range.
Modify and write the input value within the
setting range.
7-5
Grobal Sales Section
Instrumentation & Sensors Planning Dept.
1, Fuji-machi, Hino-city, Tokyo 191-8502, Japan
http://www.fujielectric.com
Phone: +81-42-514-8930 Fax: +81-42-583-8275
http://www.fujielectric.com/products/instruments/
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement