Toshiba 1800 Notebook User Manual

Add to my manuals
12 Pages

advertisement

Toshiba 1800 Notebook User Manual | Manualzz

Satellite TM

Tools Required for Proper

Disassembly and Reassembly:

1. Phillips Screwdriver (Size 1)

2.

5mm

Flat head Screwdriver

3. Case Separator

4. ESD Wrist Strap

5. ESD mats

6. Tweezers

Before attempting any of the following procedures, make sure that the main battery and AC adaptor is

not connected to the unit and the environment in which you are working on is protected from

Electro-Static Discharge(ESD).

FIELD REPLACEABLE UNIT DOCUMENTATION

Satellite TM

1800 Series

TABLE OF CONTENTS:

1. BATTERY PACK REMOVAL

2. OPTIONAL PC CARD REMOVAL

3. HDD REMOVAL

4. MEMORY MODULE REMOVAL

5. MINI PCI CARD REMOVAL

6. MODEM BOARD REMOVAL

7. KEYBOARD REMOVAL

8. IPS SWITCH REMOVAL

9. COOLING MODULE REMOVAL

10. CPU REMOVAL

11. DVD-ROM/CD-ROM DRIVE REMOVAL

12. TOP COVER REMOVAL

13. HDD/BATTERY BOARD REMOVAL

14. RTC BATTERY REMOVAL

15. VOLUME CONTROL BOARD REMOVAL

16. SPEAKERS REMOVAL

17. FDD REMOVAL

18. LED BOARD REMOVAL

19. SYSTEM BOARD REMOVAL

20. 13.3’ DISPLAY MASK REMOVAL

21. FL INVERTER AND 13.3’ LCD REMOVAL

22. 14’’ DISPLAY MASK REMOVAL

23. FL INVERTER AND 14’’ LCD REMOVAL

TOSHIBA

Tough Enough for Today’s World

FIELD REPLACEABLE UNIT DOCUMENTATION

Satellite TM

1800 Series

BATTERY PACK REMOVAL OPTIONAL PC CARD REMOVAL

PC card

Battery pack

Battery release lever

1. Turn the computer upside down as shown.

2. Slide the battery release lever in the direction of the

arrow.

3. Slide the battery pack to the right and lift it out.

PC card lock

Eject button

1. Slide the PC Card lock to unlock position

2. P ress the eject button to pop it out.

3. Press the eject button and remove the PC card .

NOTE : Before removing any PCCARD device, make sure

it is “STOPPED” in the PC Card Manager.

HDD REMOVAL

M2.5x4 black flat head screw

HDD slot cover

.

1. Turn the computer upside down.

2. Remove one M2.5x4 black flat head screw securing

HDD slot cover and pull out the cover .

HDD assembly

HDD bracket handle

M2.5x4 black flat head screw

3. Remove one M2.5x4 black flat head screw

securing the HDD assembly.

4 Grasp the HDD bracket handle and pull to

disconnect the HDD assembly.

5. Lift the HDD assembly out of the HDD bay.

TOSHIBA

Tough Enough for Today’s World

FIELD REPLACEABLE UNIT DOCUMENTATION

Satellite TM

1800 Series

HDD REMOVAL MEMORY MODULE REMOVAL

M2.5x4 black flat head screws

Memory module

Memory cover

M3x4 Flat head screws

HDD bracket

6. Remove four M3x4 flat head screws securing the

HDD bracket to the drive.

MINI PCI CARD REMOVAL

Memory clips

1. Turn the computer upside down.

2. Remove two M2.5x4 black flat head screws and

remove the memory cover .

3. Push the memory clips outward and pull the memory module out of the connector on a

30 degree angle.

PCI clips

M2.5x4 black torx screws

Mini PCI slot cover

1. Turn the computer upside down.

2. Remove two M2.5x4 black torx screws securing the mini

PCI slot cover.

Mini PCI card

3. Push the mini PCI slot clips outward and pull the

mini PCI card out of the connector on a 45 degree

angle.

TOSHIBA

Tough Enough for Today’s World

FIELD REPLACEABLE UNIT DOCUMENTATION

Satellite TM

1800 Series

MODEM REMOVAL

M2x4 brass screws

RJ11 Jack

Modem slot cover M2.5x4 black flat head screw

1. Remove one M2.5x4 black flat head screw securing

the modem slot cover.

2. Insert the case separator into the notched side of the

cover and lift up to release the two latches securing

the left side of the modem slot cover .

KEYBOARD REMOVAL

Latch

Modem

3. Remove the glass tape securing the RJ-11 jack cable.

4. Remove two M2x4 brass screws securing the

modem board.

5. Lift up the modem board to disconnect it from the

system board.

6. Remove the RJ-11 jack from the modem board.

Keyboard holder

1. Open the display panel.

2. Remove the Keyboard holder at the top of the

keyboard.

M2.5x2.6 black screws

3. Remove two M2.5x2.6 black screws securing the

keyboard.

TOSHIBA

Tough Enough for Today’s World

FIELD REPLACEABLE UNIT DOCUMENTATION

Satellite TM

1800 Series

KEYBOARD REMOVAL IPS SWITCH REMOVAL

PJ333

Keyboard cable

Keyboard

4. Lift out the keyboard and set it on the palm rest.

5. Disconnect the keyboard cable from PJ333 on the

system board and lift out the keyboard .

IPS SWITCH REMOVAL

M2.5x4 black flat head screw IPS switch cover

1. Remove one M2.5x4 black flat head screw securing

the IPS switch cover(touchpad) from the battery

compartment.

2. Remove the IPS switch(touchpad) cover from the

palm rest.

COOLING MODULE REMOVAL

PJ339

IPS switch cable

Membrane switch assy

3. Disconnect the IPS switch cable from PJ339 on the

system board and lift out the membrane switch assembly .

M2.5x6 black flat head screws Heat sink plate

1. Remove four M2.5x6 black flat head screws

securing the heat sink plate.

2. Lift out the heat sink plate .

TOSHIBA

Tough Enough for Today’s World

FIELD REPLACEABLE UNIT DOCUMENTATION

Satellite TM

1800 Series

COOLING MODULE REMOVAL CPU REMOVAL

Cooling

module

Fan cable

Flat head screwdriver

M2x16 brass screws

3. Remove four M2x16 brass screws securing the

cooling module.

4. Disconnect the fan cable from PJ770 from the

system board and lift out the Fan module.

PJ770

CPU lock

CPU

Silicone grease

5. Slide the CPU lock in the direction of the arrow.

6. Insert a 5mm flat head screwdriver on the top side

of the CPU socket and push the socket in the

direction of the arrow and lift out the CPU.

NOTE: When installing the CPU make sure that a silicone

grease is applied before attaching the cooling

module. Please refer to FSB-200112 for the complete

procedures on how to apply the silicone grease.

.

CD-ROM/DVD ROM DRIVE REMOVAL

CD/DVD-ROM drive

Brass washers

CD/DVD-ROM drive bracket

M2x2 silver screws

M2x5.5 silver screws

1. Remove two M2x5.5 silver screws securing the CD-ROM/

DVD ROM drive.

2. Slide the CD/DVD-ROM drive to the right to disconnect

it from PJ321 on the system board.

3. Remove two M2x2 silver screws and two brass

washers securing the CD/DVD- ROM drive bracket .

TOSHIBA

Tough Enough for Today’s World

FIELD REPLACEABLE UNIT DOCUMENTATION

Satellite TM

1800 Series

TOP COVER REMOVAL

M2.5x4 black screws M2.5x25 black screws

M2.5x6

black screws

Top cover assembly

M2.5x20

black screws

M2.5x6

black screws

M2.5x25

black screws

M2.5x4 black screws

1. Turn the computer upside down and remove the

following seventeen screws:

- 5 M2.5x4 black flat head screws

- 4 M2.5x6 black flat head screws

- 5 M2.5x20 black screws

- 3 M2.5x25 black screws

HDD/BATTERY BOARD REMOVAL

HDD/Battery board cable

Flexible cable PJ426 PJ34 LCD/FL cable

2. Turn the computer right side up and open the LCD

panel.

3. Remove one M2.5x6 black screws and two 2.5x25

black screws securing the top cover assembly.

4. Disconnect the LCD/FL cable from PJ34 and the

CD-ROM controller flexible cable from PJ426 .

5. Remove the top cover assembly by lifting up the

back side of the cover.

RTC REMOVAL

PJ752

PJ4

HDD/Battery board

Glass tape

PJ2 Right speaker cable

1. Disconnect the HDD/Battery board cable from PJ4

on the HDD/Battery board.

2. Disconnect the right speaker cable from PJ2 on the

HDD/Battery board.

3. Disconnect the HDD/Battery board from PJ320 on

the system board.

RTC battery cable RTC battery

1. Remove the glass tape securing the RTC battery.

2. Disconnect the RTC battery cable from PJ752 on

the system board.

3. Lift out the RTC battery .

TOSHIBA

Tough Enough for Today’s World

FIELD REPLACEABLE UNIT DOCUMENTATION

Satellite TM

1800 Series

VOLUME CONTROL BOARD REMOVAL SPEAKERS REMOVAL

Volume control cable

M2.5x4 black flat head screws Left speaker

Volume control board Speaker cable

1. Remove two M2.5x4 black flat head screws securing

the volume control board.

2. Disconnect the volume control cable from PJ61 and

the left speaker cable from PJ60 on the volume control

board.

FDD REMOVAL

PJ344

FDD cable

Right speaker

M2.5x6 Silver screws

1. Remove four M2.5x6 silver screws securing both

the left and right speakers.

2. Lift out both speakers .

FDD cable

FDD assy

M2.5x6 silver screws

1. Disconnect the FDD cable from PJ344 on the

system board.

2. Remove two M2.5x6 silver screws securing the

FDD assembly.

3. Lift out the FDD assembly .

M2x3 silver screws

4. Remove three M2.5x3 black screws securing the

FDD to the FDD case and separate the FDD from

the case.

5. Disconnect the FDD cable from the FDD.

TOSHIBA

Tough Enough for Today’s World

FIELD REPLACEABLE UNIT DOCUMENTATION

Satellite TM

1800 Series

LED BOARD REMOVAL SYSTEM BOARD REMOVAL

CD-ROM insulator

LED board

1. Lift up the LED board to disconnect it from PJ310

on the system board.

Conn holder M2.5x6 silver screws

1. Remove two M2.5x6 silver screws securing the

conn holder.

2. Lift out the conn holder .

SYSTEM BOARD REMOVAL

DC-jack harness

PJ800

Hex screws

System board

Battery harness

PJ810

3. Disconnect the

system board.

4. Remove

DC-jack harness two hex screws and from PJ800

M2.5x4

black flat head screws three M2.5x4 black

flat ehad screws securing the system board.

on the

PJ3

Flexible cable

5. Remove the system board by lifting up from the front

side as shown above.

6. Disconnect the flexible cable and battery harness

from PJ3 and PJ810 on the system board.

TOSHIBA

Tough Enough for Today’s World

FIELD REPLACEABLE UNIT DOCUMENTATION

Satellite TM

1800 Series

13.3” DISPLAY MASK REMOVAL FL INVERTER AND 13.3” LCD REMOVAL

LCD module

Latch

Display mask

LCD

M2x3 silver screws

M2x5 silver screws

Mask seals

1. Remove two mask seals at the bottom corners of the

display assembly to expose two screws securing the

display mask.

2. Remove two M2.5x6 black screws securing the display

mask.

3. There are 23 latches securing the display mask .

Carefully insert your fingers between the display mask

and the LCD module and pry open the latches starting

from the seven bottom latches , to the five latches on

the right and left sides , ending with the six top latches .

FL cable

LCD/FL cable M2x5 brass screw

Glass tape

FL inverter board

1. Peel off the glass tape securing the FL cable.

2. Remove one M2x5 brass screw securing FL inverter

board.

3. Carefully lift up the FL inverter board and disconnect

the LCD/FL cable from CN1 and the FL cable from CN2 .

4. Remove four mask seals to expose four screws securing the left and right LCD brackets .

5 Remove four M2X5 silver screws securing both

brackets.

6. Carefully rotate out the top of the LCD module

enough to access the display cable.

7. Peel off the tape securing the LCD/FL cable and

disconnect the cable.

8. Remove four M2x3 silver screws securing the left

and right LCD brackets.

TOSHIBA

Tough Enough for Today’s World

FIELD REPLACEABLE UNIT DOCUMENTATION

Satellite TM

1800 Series

14” DISPLAY MASK REMOVAL

Display mask

LCD

Latch

M2x5.5 silver screws

FL INVERTER AND 14” LCD REMOVAL

LCD module

M2x5.5

silver screws

Mask seals

1. Remove two mask seals at the bottom corners of the

display assembly to expose two screws securing the

display mask.

2. Remove two M2.5x6 black screws securing the display

mask.

3. There are 23 latches securing the display mask .

Carefully insert your fingers between the display mask

and the LCD module and pry open the latches starting

from the bottom seven latches , to the five latches on

the right

and left sides , ending with the six top latches .

Mask seals

Mask seals

LCD/

FL cable

M2x5 brass screw FL inverter board

FL cable

Glass tape

1. Peel off the glass tape securing the FL cable.

2. Remove one M2x5 brass screw securing FL inverter

board.

3. Carefully lift up the FL inverter board and disconnect

the LCD/FL cable from CN1 and the FL cable from CN2 .

4. Remove four mask seals to expose four screws

securing the LCD module

5. Remove four M2x5.5 silver screws securing the

LCD module.

6. Carefully rotate out the top of the LCD module enough to access the display cable.

.

7. Peel off the tape securing the LCD/FL cable from the

LCD module and disconnect the cable.

TOSHIBA

Tough Enough for Today’s World

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement