Ladda ner | Manualzz

Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/02G051-.html
G51 – 3U CompactPCI® Serial QorIQ™
Communications CPU Board
n Single-board computer with up to 4 Gb
Ethernet
n P3041 Freescale™ QorIQ™ quad-core
PowerPC® processor
n 4 HP system master and peripheral slot
n PICMG CPCI-S.0 CompactPCI® Serial
n Up to 8 GB DDR3 SDRAM soldered, ECC
n Standard front I/O: 3 Gb Ethernet, 2 USB
2.0
n Standard rear I/O: 3 PCIe®, 4 Gb Ethernet, 6
USB 2.0, 2 SATA (3 Gb)
n -40 to +85°C with qualified components
n Compliant to EN 50155 (railways)
The G51 single-board computer unites the benefits of
CompactPCI® Serial and the interface capabilities and
calculation power of a QorIQ™ CPU. Being based on a
Freescale™ quad-core QorIQ™ P3041 processor, the
3U, 4 HP SBC provides a large number of high-speed
serial interfaces both at the front and at the CPCI-S.0
rear connectors.
Three Gigabit Ethernet channels at the front and
another standard port at the rear provide solid
connectivity. The three front ports can also be routed
to the rear, so that a maximum of four Ethernet
channels are available on the backplane. This routing
option is a standard feature, and can be set in the UBoot boot loader.
In a similar way, the G51 single-board computer comes
with two SATA 2.x channels, where one can either be
used for an onboard mSATA 2.x disk, or as a second
port at the rear - also switchable via U-Boot. SGPIO is
available, too.
The G51 comes with six standard rear USB 2.0 ports,
and the standard front USB interface can be led to the
rear as a hardware option, for a total of seven
G51 Data Sheet / 2015-07-07
backplane channels. Three PCI Express® links (two x2 and one x4) add
another important column of CompactPCI® Serial features to the G51's
rear I/O.
Its abundant connectivity, flexible configuration options and multi-core
computing performance make the G51 a universal off-the-shelf platform
for all kinds of communication and processing tasks. Data acquisition,
data encryption, simulation and process control systems are only a few
examples. Suitable CompactPCI® Serial peripheral cards are available to
add specialized functions in a modular system where necessary.
Apart from its connectivity, the card comes with fast DDR3 RAM, a
microSD™ card slot, a number of board management functions and
Linux BSP support. All components are soldered for protection against
shock and vibration and withstand an extended operating temperature
of -40°C to +85°C. As an option, the board can be equipped with M12
Ethernet front connectors. The G51 is also ready for coating so that it
can be used in humid and dusty environments.
All this makes the G51 a perfect choice for railway, avionics or marine
applications, but also for fields like automation or power & energy,
where computers face harsh environments.
Page 1
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/02G051-.html
Diagram
F
3 Gigabit Ethernet
3 Gigabit Ethernet
MUX
F
1 Gigabit Ethernet
F
CPCI-S.0
P6
R
F
F
USB 2.0 host connector
6 or 7 USB 2.0
Configuration port (USB)
ECC DDR3
SDRAM
SATA (3 Gb)
Boot Flash
Freescale™ QorIQ™
P3041
Processor
FRAM
F Front
R Rear I/O
B Onboard
Options
G51 Data Sheet / 2015-07-07
SATA (3 Gb)
mSATA
slot B
SGPIO
eMMC
card B
SDHC
microSD™
slot B
USB
2 PCIe x2 (2.0)
I2C
1 PCIe x4 (2.0)
BMC
CPCI-S.0
P5 to P1
R
Page 2
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/02G051-.html
Technical Data
CPU
n
The following CPU types are available:
o Freescale™ QorIQ™ P3041, quad core, 1.2 GHz, 600 MHz memory bus, with encryption
o Freescale™ QorIQ™ P3041, quad core, 1.2 GHz, 600 MHz memory bus, without encryption
o Freescale™ QorIQ™ P3041, quad core, 1.33 GHz, 667 MHz memory bus, with encryption
o Freescale™ QorIQ™ P3041, quad core, 1.33 GHz, 667 MHz memory bus, without encryption
Memory
n
System Memory
o Soldered DDR3
o With or without ECC support
o 2 GB, 4 GB, or 8 GB
Boot Flash
o 64 MB, 128 MB or 256 MB
FRAM, non-volatile
o 0 KB or 8 KB
Please see Ordering Information for available standard versions.
n
n
n
Mass Storage
n
The following mass storage devices can be assembled:
o microSD™ card
o mSATA disk
o eMMC device, soldered; different sizes available
Front Interfaces
n
n
USB
o One Series A connectors, USB 2.0 (480 Mbit/s), host interface, switchable to the rear connector
o One configuration port implemented as a USB 2.0 (480 Mbit/s) device interface
Ethernet
o Three RJ45 connectors, 1000BASE-T (1 Gbit/s), or
o Three M12 connectors, 1000BASE-T (1 Gbit/s)
o All front ports can be switched to the rear using U-Boot for a total of four rear channels
o Two link and activity LEDs per channel
o IEEE 1588 support (PTP, Precision Time Protocol) for 3 front/rear ports and 1 additional rear port
Front-panel LED for board status
Blue front LED for hot plug
Reset button
Onboard Interfaces
n
Two onboard user LEDs
Rear Interfaces
n
Compatible with CompactPCI® Serial PICMG CPCI-S.0 Specification
SATA
o Two channels, SATA Revision 2.x (3 Gbit/s) (reduces to one port if the link to the mSATA disk is
required, can be switched in U-Boot)
Serial GPIO (SGPIO)
o One channel, compliant with SFF 8485 specification
USB
o Six channels, USB 2.0 (480 Mbit/s), host
o Option: One additional host port via CPCI-S.0 rear connector instead of front connection
Ethernet
o One channel, 1000BASE-T (1 Gbit/s)
o All front ports can be switched to the rear using U-Boot for a total of four rear channels
PCI Express®
®
o Two x2 links (1000 MB/s per link), PCIe 2.x (5 Gbit/s per lane)
®
o One x4 link (2 GB/s per link), PCIe 2.x (5 Gbit/s per lane)
n
n
n
n
n
n
n
n
Supervision and Control
n
n
n
n
n
G51 Data Sheet / 2015-07-07
Board controller
Watchdog timer
Temperature measurement
Real-time clock with supercapacitor or onboard battery backup
o Data retention of supercapacitor: 72 hours
Hot-plug capability
o Hot-pluggable when used as a peripheral board
Page 3
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/02G051-.html
Technical Data
Backplane Standard
n
CompactPCI® Serial PICMG CPCI-S.0 Specification
System or peripheral slot
Electrical Specifications
n
Supply voltage: +12 V (-5%/+5%)
Mechanical Specifications
n
Dimensions: 3U, 4 HP
Environmental Specifications
n
Temperature range (operation):
o -40..+85°C (qualified components)
o Airflow: min. 1.5 m/s
Temperature range (storage): -40..+85°C
Cooling concept
o Air-cooled, or
o Conduction-cooled in MEN CCA frame
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300 m to +3000 m
Shock: 50 m/s², 30 ms (EN 61373)
Vibration (function): 1 m/s², 5 Hz - 150 Hz (EN 61373)
Vibration (lifetime): 5.72 m/s², 5 Hz - 150 Hz (EN 61373)
Conformal coating on request
n
n
n
n
n
n
n
n
n
n
Reliability
n
MTBF
o 13 981 h @ 40°C according to IEC/TR 62380 (RDF 2000) (model 02G051-00 with supercapacitor)
o 480 063 h @ 40°C according to IEC/TR 62380 (RDF 2000) (calculated for model 02G051-00 without
supercapacitor)
Safety
n
Flammability
o UL 94V-0
Electrical Safety
o Insulation measurement test according to EN 50155 (12.2.9.1)
o Voltage withstand test according to EN 50155 (12.2.9.2)
o Information technology equipment test according to EN 60950
n
EMC Conformity
n
n
n
n
n
n
Software Support
BIOS
G51 Data Sheet / 2015-07-07
EN 55022, IEC 61000-6-4 (radio disturbance)
IEC 61000-4-2 (ESD)
IEC 61000-4-3 (electromagnetic field immunity)
IEC 61000-4-4 (burst)
IEC 61000-4-5 (surge)
IEC 61000-4-6 (conducted disturbances)
n
Linux (in preparation)
For more information on supported operating system versions and drivers see Software.
n
U-Boot Universal Boot Loader
n
Page 4
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/02G051-.html
Configuration & Options
Standard Configurations
Article No.
CPU Type /
Clock
Encryption
System RAM
FRAM
eMMC
USB
Ethernet
Conn.
Operating
Temperature
02G051-00
P3041, 1.2
GHz
No
2 GB
0 KB
0 GB
2 front, 6
rear
RJ45
-40..+85°C
Ordering Information
Standard G51 Models
02G051-00
3U CompactPCI® Serial communications SBC, Freescale™ QorIQ™ P3041, 1.2 GHz, 2 GB
RAM with ECC, RJ45 Ethernet at front, -40..+85°C
Memory
0751-0046
MicroSD card, 2 GB, -40..+85°C
0751-0051
SSD mSATA, 8 GB, -40..+85°C
0751-0052
MicroSD card, 4 GB, -40..+85°C
0701-0058
CompactPCI® Serial 19" 4U/84 HP rack-mount enclosure for 3U cards (vertical), 9-slot
backplane, system slot left, full mesh, 460 W ATX PSU 90..264VAC, 1U fan tray with 2x
12 VDC fans, 0..+45°C
Systems & Card Cages
MEN delivers turn-key systems completely installed (hardware, operating system, accessories), wired and
tested. Different rack sizes, power supplies and backplanes on request.
For details please contact your local sales representative.
Contact Information
Germany
France
USA
MEN Mikro Elektronik GmbH
Neuwieder Straße 3-7
90411 Nuremberg
Phone +49-911-99 33 5-0
Fax +49-911-99 33 5-901
MEN Mikro Elektronik SAS
18, rue René Cassin
ZA de la Châtelaine
74240 Gaillard
Phone +33 (0) 450-955-312
Fax +33 (0) 450-955-211
MEN Micro Inc.
860 Penllyn Blue Bell Pike
Blue Bell, PA 19422
Phone (215) 542-9575
Fax (215) 542-9577
[email protected]
www.men.de
[email protected]
www.men-france.fr
[email protected]
www.menmicro.com
The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are
trademarks or registered trademarks of their respective holders.
MEN is not responsible for the results of any actions taken on the basis of information in the publication, nor for any error in or omission from the publication.
MEN expressly disclaims all and any liability and responsibility to any person, whether a reader of the publication or not, in respect of anything, and of the consequences of anything,
done or omitted to be done by any such person in reliance, whether wholly or partially, on the whole or any part of the contents of the publication.
The correct function of MEN products in mission-critical and life-critical applications is limited to the environmental specification given for each product in the technical user manual.The
correct function of MEN products under extended environmental conditions is limited to the individual requirement specification and subsequent validation documents for each product
for the applicable use case and has to be agreed upon in writing by MEN and the customer.Should the customer purchase or use MEN products for any unintended or unauthorized
application, the customer shall indemnify and hold MEN and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses,
and reasonable attorney fees arising out of, directly or indirectly, any claim or personal injury or death associated with such unintended or unauthorized use, even if such claim alleges
that MEN was negligent regarding the design or manufacture of the part.
In no case is MEN liable for the correct function of the technical installation where MEN products are a part of.
Copyright © 2015 MEN Mikro Elektronik GmbH. All rights reserved.
G51 Data Sheet / 2015-07-07
Page 5