HI-604X Easy Manual
Easy Manual
HI-604X GPS Tracking Device with 3-years
Standby Battery/IP56 waterproof
This is a multi-function state-of-the-art GPS tracking solution offering you all in one solution
GPS/GSM/GPRS/SMS all in real time - the most flexible tracking device in the world - a great
marriage of the latest technology and affordability.
With HI-604X multi function tracker, one can track, remote control, tapping any object
globally in real time on the map. User can check the real time location from the GPRS
tracking web site or using the Haicom Tracking software installed on the PC and check the
real time position on the map via the regular dial tone transmission.
HI-604X tracking Device is the best tracking solution for use in the widest range of
applications, from motor homes to mobile home, from cars to caravans, from agricultural
machinery to construction equipment, from containers to golf carts – all the assets that you
feel could be at risk, especially if they do not have their own source of power.
Just place the tracker where there is no metal material on above, user can see his valuable
anytime, anywhere from any computer. The waterproof case allows the tracker still
functioning even though under tough and harsh environment. The build in big battery
provide the independent power supply even if there is no external power supply. The moving
sensor will let the tracker totally switch off (only the microchip standby: 2 mAh) and the
tracker can operate very long, could be years, if there is not much movements. With the
moving sensor, the tracker will not drain the car battery when the tracker connected to
external battery power.
Haicom Asset Tracking Solution offers you a lot of advantages
Quad band 850/900/1800/1900 MHz GSM system
External SiRF Star III high performance GPS receiver
Internal GSM active antennas
Advanced communication via SMS/TCP/UDP/HTTP
Program, control and update firmware the tracker from the OTA (Over the Air) web
tracking platform and also USB configurations
Build in motion sensor for power saving
Support emergency/ over speed/ motion/ power lost alarm
Real time location report on preferred interval and vehicle status monitoring
Premium functions: Fast GPS Fixed/ A-GPS/ Geo-Fencing/ Hands free Kit/ Anti-Theft/ Data
Logger function with 8MB memory size with 100,000 records or more
Low battery alarm and battery voltage status
• Our GPRS tracking software Platform and server is free; if you have your own server we
can program our tracker with your server protocol
• Worldwide coverage with NO additional programs to buy or install - no additional or hidden
Built-in moving sensor with deep sleeping mode (2mA)
Built in 5,500 mAh battery for independent power
Stand-by deep sleeping time up to 180Days (depending on tracking frequency)
Very high sensitivity GPS fixed
Multi-ways tracking software plate form available
Waterproof case for harsh condition environment
• Customizations for different tracking applications
• Comes with strong Magnetic mounting for easy attachment
Stand alone (Internal Antenna - Self Contained Unit)
Worldwide coverage using GSM/GPRS/SMS
allow you to monitor both on demand or at regular intervals
Ultra low power GPS.
• All-in-one design.
• Provides you 24/7 access to the location of all your assets.
• LIVE real-time tracking, configurable from every 20 second to 72hour GPRS updates!
• Give complete supervision into your operations by seeing how long
assets are sitting around in one place, when they start moving / stop moving etc.
• Establish how long the assets are being used (actual operations time).
• Warns when unauthorized/unwanted movement happens.
• Provides security and accountability.
• Enable the recovery of any stolen assets.
• View asset's history online from any computer
Police Force and law enforcement Sector
Private Investigations Sector
GPS Asset Tracking
GPS Cargo Tracking
• Surveillance Work
• Anti theft – both domestic and commercial
• Asset recovery
HI-604X Characteristics
Power Supply
Backup Battery
Normal power consumption
90.8mm x 52.3mm x 38.9mm
Operating temperature
-20℃ to 55℃
5% to 95% Non-condensing
GSM 850/900/1800/1900Mhz
GPS Chipset
latest GPS SIRF-Star III chipset
GPS Sensitivity
GPS Frequency
L1,1575.42 MHz
C/A Code
1.023MHz chip rate
20 channel all-in-view tracking
Position Accuracy
10 meters, 2D RMS
Velocity Accuracy
0.1 m/s
Time Accuracy
1 us synchronized to GPS time
Default datum
0.1 sec. , average
Hot start
1 sec. , average
Warm start
38sec. , average
Cold start
42 sec. , average
Altitude Limit
18,000 meters (60,000 feet) max.
Velocity Limit
515 meters / second (1000 knots ) max
One input and one output
How The HI-604X GPS Tracker Works:
Once fully charged, the HI-604 battery can last up to 180 Days, depending on usage
frequency, it has a built-in movement sensor that can be configured directly to alert you on
your mobile phone and our server automatically when the object is moved or touched. The
owner can locate the asset at any time using our free of charge GPRS web tracking
platform or from your smart phone or real time SMS address hyperlink solutions. The
HI-604X can also be programmed to automatically report its position at regular pre-set
time intervals, which could be from every 30 seconds to every 72 hours. Also, set up to
weak up and send location back during the long sleep mode.
Getting Started:
1. Take out the waterproof side rubber seal and connect the 18 pin cable to HI-604 and plug
another end to the USB port from computer or to the AC power outlet with the AC
adaptor for power charging.
2. Place the SIM card on the SIM card tray and slid in the SIM card tray in. When the SIM
card tray inserted in place, the HI-604X power will switch on.
3. To switch off HI-604 power, simply push in the yellow dot with any pen.
LED Indicator:
Standard Packing:
1. HI-604X main unit
2. SIM card tray
18 pin to USB set up cable
AC power adaptor
DC cigarette lighter
mini CD with user manual
The in-build self contained battery:
As mentioned, we can not tell you how long the HI-604 battery can last because it is really
depend on how frequent the tracker used and the sleeping mode time.
Anyway, here are the figures:
GSM connected (GPS on) 90 mA
Connect HI-604 to vehicle battery:
With the optional car battery cable, user can also connect HI-604 to the vehicle battery for
permanent power supply.
Car battery cable:
The car battery cable can be connected directly to the vehicle battery (12V or 24V) and
transfer into 5V for the HI-604X. Very important: don’t connect HI-604 pintail cable directly
to the vehicle battery because the pintail cable takes only 5V.
GPRS Tracking:
Set up the APN, IP and Port:
1. Connect HI-604X to computer USB port with the set up cable
Setting up
For the initial set up from the retail box, you will need to use the set up program from the
inclusive small CD and perform the set up from your computer. Please make sure the SIM
card tray is pull off from the holder (User can only program the HI-604X while the HI-604X
on power off status)
1. Connect the 18 pins to USB set up cable from the tracker to your computer USB port:
2. Open the tracker set up program:
3. Click the “ Get Parameter “
4. Message will shown: “ GET FINISH “ and all the tracker current set up will appeared:
Please double check with your local telecomm service provider to make sure the SIM card
APN (Access Point Name) and fill in and program to the tracker.
Initial computer set up reminder:
On factory defaults, the basic set up was done.
As soon as you plug in the computer and get parameter, the computer will
automatically get and show the tracker imei# on the program.
You will double check with your SIM card telecomm service provider for the
correspondent APN (Access Point Name) and key in to the APN section (like the
below blue block). The APN could be for instances, “ internet “, “ web.Vodafone
“ or any name.
Also, please double check if the IP and port settings (the below red block) was
correctly set up. (for use with Haicom GPRS web tracking:
http://www.tracking.haicom.com.tw:8090/Default.aspx )
The above settings are the must to make the tracker to start sending data back
to our server and show on the platform. The rest of selections will be set up
depend on individual user’s preferences.
Terms Explanations
System Config:
1. IMEI: Tracker ( International Mobile Equipment Identity number,IMEI# )
2. Version: Tracker firmware version
3. SMS intervals[s]: Interval of tracker send real time position with Google map
hyperlink via SMS
4. GPRS interval[s]: Interval of tracker send real time position to the server via GPRS
5. LOG interval[s]: Interval of tracker data logging
6. Geofence [m]: Send warning when tracker out of the Geofencing range
7. Alarm Reset[s]: Time of all the security functions temporary disabled
8. Ringing of Call[Times]: Tracker ringing time when user call
1. Security:
2. SOS: Send SMS when user press the SOS button
GEO Fencing: Send SMS when the tracker out of the GeoFencing range
Power Cut: Send SMS when the external power cut off
Low Battery: Send SMS when the tracker internal battery low
Vibration Alarm: Send SMS when vibration sensor triggered
7. GPS fix Alarm: Send SMS when GPS in 3D fixed
8. Over Speed Alarm: Send SMS when over the speed limit
APN, USER, PASS: Please fill in the SIM card APN, User name and Pass word (check
your telecomm. Service provider), Example: internet
IP/DOMAIN NAME: Please fill in the server IP or Domain name. For example: IP: or Domain name: http://www.tracking.haicom.com.tw:8090
TCP Port: Please fill in the TCP port
UDP Port: Please fill in the UDP port
CONFIG PORT: Please fill in the port for the tracker configuration software from the
web tracking plate form to program from the air.
Reply!!: Server response “ !! “ back when receive the tracker data
SCU PHONE [ex.***** ;***** ;]
Please fill in the telephone numbers for the tracker to call back when the motion sensor,
relay, etc. functions are triggered. Please put a “ ; “ mark after each phone number.
Maximum 10 phone numbers to be keyed in.
SOS PHONE [ex.***** ;***** ;]
Please fill in the telephone numbers for the tracker to call back when the SOS button is
triggered. Please put a “ ; “ mark after each phone number. Maximum 10 phone
numbers to be keyed in.
SMS PHONE [ex.***** ;***** ;]
Please fill in the telephone numbers for the tracker to call back when the request by the
SMS command. Maximum 10 phone numbers to be keyed in.
SMS Command for X seris
SMS command
Get All setting value back
Security Phone Set (10 Max.)
SOS Phone Set (10 Max.)
SMS Phone Set (10 Max.)
Get Security Phone setting
Get SOS Phone setting
Get SMS Phone setting
Set GSM/SPRS config
Get APN setting
#0000,210,IP or Domain,TCP port,UDP,port,Web port,port select
Set Server config
Get IP and Port value
Set System config
Get Interval setting
Get Event setting
Set Buzzer ON/OFF
Get Buzzer setting
Set Power Saving Mode
Get Power Saving Mode
Set Sensor Alarm
Bugging Ringing Setting (time)
Set Pin Code
Chang Password
GPS Data
Talking Permitted
#0000,12,1 or 0
( 1 is cutting )
Relay #1 On/Off
#0000,13,1 or 0
( 1 is cuttind )
Relay #2 On/Off
System Reset
Inform Tracker call back to server
( 1 is activated, 0 is deactivated )
Set GEO Fencing activate
( 1 is activated, 0 is deactivated )
Set GPS FIX alarm activate
( 1 is activated, 0 is deactivated )
Set Sensor (Moving) Alarm
( 1 is activated, 0 is deactivated )
Set Over speed alarm activate
( 1 is activated, 0 is deactivated )
Set GPS On/Off
1. ON : 1 , OFF : 0
2. * consult the web set up platform ( Device Setting )
* Update new firmware
1. Decompress the files.
2. Run the TRACKER program
3. Plug the tracker to the computer USB port
4. Press the GET PARAMETER and see the current settings
5. Press the UPDATE
6. Open the firmware (2 files)
7. Show the below message and click OK
8. The firmware start loading
9. The below message shown and press OK
1. Initial registration from the GPRS web tracking platform:
2. New user; please register before login.
3. The tracker idea # is shown on the bottom of the sticker:
4. After login, select the “ Manage “ for Add New Tracker
* Program tracker from Haicom GPRS web tracking web site
1. Make sure the tracker connected to the GSM network and start sending back
the data
2. On the Manage/Device Settings section, select the tracker and press Load
3. Change the prefer settings
4. Press Setup and will show: Device information update successfully
How to generate the detail report print out with address
1. Select the preferred from and to date and click “Search “
2. Click “Download “ and the csv file will be saved as Excel file
3. Click “Address Transfer.zip “ for the transfer program
1. Click “Address Transfer program icon to run the program “
2. Select the csv Excel file
3. Click “Transfer Address (3) “
4. After the translate program running, the “Translate successful ! “ message
will appeared. In the mean time, there will extra Excel file with (Address) saved
on your desktop. Open the file, you will see the retail reports, with
Date/time/long./lat./detail address data like below example shown.
The example of the detail report printout:
How to calculate the historical total travel distance:
1. Click the preferred start point
2. Click the start point icon
3. Click the preferred end point
4. Click the end point icon
5. Click the Distance icon to get the total traveled distance
How to send command from the GPRS tracking platform:
1. Click Manage -> Command Send:
2. Click to send commands from the platform:
Open (0) means the relay is stay connection.
To cut the relay (cut off the ignition, oil pump, power, etc.), select Close (1)
3. Click the Select to see the command sending status:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF