New Era Pump Systems, Inc. The NE-1000 Family of Syringe Pumps

New Era Pump Systems, Inc.

2012 Catalog

Table of Contents

Syringe & Peristaltic Pumps

• NE-9000 Peristaltic Dispensing Pump 3

• NE-300 Just Infusion™ Single Syringe Pump 4

• NE-1000 Single Syringe Pump Models 5

• NE-4000 Double Syringe Pump Models 6

• Multi Syringe Pumps Models 7

• NE-1002X Microfluidics Single Syringe Pump Models 8

• OEM Syringe Pump Models & Design Services 9

• Continuous Infusion Pump Systems 10

• Continuous NE-1000X: Next Generation Continuous Infusion Syringe Pump System 11

Upgrades & Accessories

• Upgrade Options 12

• Syringe Heater Kit 13

• Anabox Analog Sensor Interface & Foot Switch 14

• Valve Control Boxes 15

• Pump Cables & Accessories 16

• Syringe Pump Control Software Syringe Pump Pro 17

• Disposable Syringes & Kits 18

• Glass Syringes 19

• Stainless Steel Syringes 20

NE-1000 Fully Programmable Family of Syringe Pumps

2

NE-1000 NE-500 NE-4000 NE-1600 NE-1800

NE-1002X NE-4500 NE-4002X NE-1200 Dual-NE-1000

New Era Pump Systems, Inc. Phone: 631-249-1392

SyringePump.com

NE-9000 Peristaltic

Dispensing Pump $500

Featuring

Learn & Repeat™

for

Fantastic Productivity!













Pump from a reservoir through replaceable continuous tubing.

Pump never comes into contact with fluid.

Continuous Pumping. Up to 900 mL/min.

Measured dispenses for production filling of bottles.

Learn and Repeat™ for quick setup of production dispenses.

Computer and foot switch interface.

Description:

Have a need to accurately fill multiple bottles, vials, or other containers with a liquid? The Learn and Repeat™ mode of the NE-9000 Peristaltic Pump from New Era Pump Systems Inc. makes even the smallest of businesses highly productive right from day one. The NE-9000 is equipped to be used in many settings from the small home based businesses to the large factory floor. The pump can be integrated into existing production lines or simply used stand alone. The NE-9000 comes fully programmable and can be operated manually or with a PC through a RS-232 communication port. Even the most novice of technology users can easily operate the pump stand alone or through the PC. The pump's specialty is in small scale production dispensing. It will fill numerous bottles, vials, etc. with fluids of all types. Equipped for mass production dispensing at a price affordable for the home based business, this pump is a great deal no matter what your purchasing power is. The flow rates vary from a minimum of 0.041 mL/min to a maximum of 904.4 mL/min with 3/16” ID. tubing.

Space Saving Chassis: Foot print size of only 7 3/4” x 5 1/4”. Won't take up unnecessary space on your laboratory or production bench. Easy-to-use keypad interface.

Features:

Dispense or withdrawal pumping

• Learn and Repeat™

• Foot Switch control available.

• Slow down mode to improve accuracy of dispenses.

• Anti-Drip mode to stop oozing after dispenses.

• Calibration mode to improve accuracy.

• Programmable dispense volumes. Store and select from up to 40 dispenses.

• Non-volatile memory of all operating parameters and pumping program.

• Programmable Phases allowing complex pumping applications and interaction with external devices.

• RS-232 bi-directional control for complete control from a PC. Network up to 100 pumps and other devices.

• Digital logic input: TTL I/O with software filtered control inputs to eliminate glitches and ringing on the control inputs.

• Configurable TTL operational trigger for foot switches and other devices.

• Power Failure Mode: Restarts the Pumping Program after a power interruption.

• Audible Alarm

• Two year warranty

• Includes all the advanced functions and programming features of the NE-1000 family.

• Worldwide power supplies available.

• Comes with 5ft of Norprene Industrial Grade Tubing, other tubing available.

**Not For Clinical Use On Humans**

3


SyringePump.com

NE300 Just Infusion™ Syringe Pump

4

Infuses Only!

Just the features that you want and none that you don’t want to pay for

-Does not withdraw, volume target, have computer interface or have programmability

3 Easy Steps!

1. Set the syringe diameter

2. Set the infusion rate

3. Start the pump

• Holds small or big syringes up to 60 mL

• Pumps continuously until you stop the pump

• Variable infusion rate can be changed while pumping

• Remembers previous settings on power up

• Power failure mode allows pump to continue pumping after a reset

• Syringe purge mode

• Displays total volume dispensed in mL or µL units

• Maximum pumping rate of 1568 mL/hr with a 60 mL syringe

• Precise reproducible flow rates

• Selectable infusion rates units: mL/hr, µL/hr, mL/min, µL/min



SyringePump.com

NE-1000 Single Syringe Pump - $750

High Pressure Syringe Pump

NE-1010: $830

Continuous Infusion

Syringe Pump System

Dual-NE-1000: $1510

Microfluidics Double

Syringe Pump

NE-1002X: $1500

NE-1000 Features:

Accepts 1 syringe from the smallest size available up to 60 mL. A 140 mL syringe can be filled up to 120 mL. NE-1000 & Dual-NE-1000 pumping rate as low as 0.73 µL/hr with a 1 mL syringe or as high as 35.33 mL/min with a 60 mL syringe. NE-1010 pumping rate as low as 1.459 µL/hr with a 1 mL syringe or as high as 127.2 mL/min with a 60 mL syringe. NE-

1002X pumping rate as low as .008 nL/hr with a 0.5 µL syringe or as high as 1555 µL/min with a 60 mL syringe.

The NE-1000 Family of Syringe Pumps Features

Built for Automation

Operates stand-alone or from a computer

Infuses and withdraws

Applications range from simple infusions to complex pumping programs

Programmable preset protocols

Program up to 41 pumping phases: change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer.

RS-232 and TTL logic control interfaces

Two pumps connected with a dual cable create a Dual Pump System allowing for continuous infusion or emulsification. Network, control, and monitor up to 100 pumps with one computer.

Worldwide power supplies available. Motor stall detection. Non-volatile memory of all parameters and programming. Upgradeable to the X and X2 advanced firmware versions for gradient pumping and increased program memory. Dispensing accuracy of +/-1%. Unlimited lifetime technical support. Two year warranty. Plus many, many more features!


5


SyringePump.com

NE-4000 Double Syringe Pump - $975

Continuous Infusion

Double Syringe Pump System

DUAL-NE-4000: $1960

Microfluidics Double

Syringe Pump

NE-4002X: $1950

BUILT FOR AUTOMATION

NE-4000 Features:

Accepts 2 different syringes from the smallest size available up to 60 mL. A 140 mL syringe can be filled up to 120mL. 2 different sized syringes can be used for proportional infusion. NE-4000 & Dual-NE-4000 pumping rate as low as 1.459 µL/hr with a 1 mL syringe or as high as 127.2 mL/min with a 60 mL syringe.

NE-4002X pumping rate as low as .008 nL/hr with a 0.5 µL syringe or as high as 1555 µL/min with a 60 mL syringe.











6



SyringePump.com

Multi Syringe Pumps - $1500

7

NE-1200: $1500

DUAL-NE-1200: $3010

Holds 2, 4, 6, 8, 10 or 12 syringes of up to 3 cc each

Infusion rates from 0.454 µL/hr (1 cc syringe) to 121.2 mL/hr (3 cc syringe)

Higher flow rate models available

Easy-to-use keypad interface

NE-1600: $1500

DUAL-NE-1600: $3010

Holds 2, 4 or 6 syringes of up to 60 cc each or 2 or 4 syringes up to 140 cc each

Infusion rates from 0.454 µL/hr (1 cc syringe) to 2376 mL/hr (140 cc syringe)



NE-1800: $1500

DUAL-NE-1800: $3010

Holds 2, 4, 6 or 8 syringes of up to 10 cc each

Infusion rates from 0.454 µL/hr (1 cc syringe) to 342.6 mL/hr (10 cc syringe)















SyringePump.com

NE-1002X Microfluidics Syringe Pump - $1500

8

Continuous Infusion Microfluidics

Syringe Pump System

DUAL-NE-1002X: $3010

OEM Microfluidics Syringe Pump

NE-502X: $1100

NE-1002X Features:

Advance Per Step: 4.252232 Nanometers

Smooth pumping at ultra low flow rates. Accepts syringes from the smallest size available up to 60 mL.

A 140 mL syringe can be filled up to 120mL. Pumping rate as low as 0.008 nL/hr with a .5 µL syringe or as high as 1246 µL/min with a 60 mL syringe. Includes the X Upgrade Smooth Linear/Gradient increasing and decreasing pumping feature.









Two pumps connected with a dual cable create a Dual Pump System allowing for continuous infusion or emulsification. Network, control, and monitor up to 100 pumps with one computer. Worldwide power supplies available. Motor stall detection. Non-volatile memory of all parameters and programming. Upgradeable to the X and X2 advanced firmware versions for gradient pumping and increased program memory. Dispensing accuracy of +/-1%. Unlimited lifetime technical support.

Two year warranty. Plus many, many more features!



SyringePump.com

OEM Syringe Pumps NE-500 Starting at $495

OEM Syringe Pump

NE-500: $495

OEM Syringe Pump with Stall Detection

NE-501: $550

High Pressure OEM Syringe Pump

NE-510: $535

High Pressure OEM Syringe Pump with Stall Detection

NE-511: $535

Double OEM Syringe Pump

NE-4500: $625

Double OEM Syringe Pump with Stall Detection

NE-4501: $680

Computer controllable: networkable up to 100 pumps

Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump from an attached Foot Switch, button, or I/O controller

Add the OEM Starter Kit to run as a fully functional, stand-alone pump.

Designed for OEM applications, this pump has the same mechanisms and electronics as the NE-1000 aside from the front panel controls.

Operates from a computer or a foot switch

Infusion and withdrawal

Set a single pumping rate and/or dispensing volume

Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer

Network, control, and monitor up to 100 pumps with one computer

Motor stall detection available in NE-501 model ($550)

Dispensing accuracy of ± 1%

For Custom Designed OEM Syringe

Pumps please call or e-mail for a quote.

Custom Chassis, Firmware and Mechanical Design. You want it, we'll make it, no matter how

simple or complex. When others say it can't be done, we say of course it can be done. The limits are endless to what we can create for you.

We here at New Era have been designing pumps for over ten years for all types of OEM applications.

9

OEM Syringe Pump Accessories

OEM Starter & Net Kits

Model: OEM-STARTER

Price: $25

Allows user to interactively communicate to the pump with a computer

Includes: power supply, Pump-to-PC network cable and user manual

Foot Switch

Model: OEM-NET

Price: $15

Power supply and secondary cable only. For use when networking two or more OEM NE-500 syringe pumps together. Must use the secondary cable in order to complete this application.

Model: ADPT-FOOTSW-2

Price: $25

Start, stop, or send a signal to a pumping program

Attach to any of the NE-1000 family pumps to allow remote operation

Utilizes the TTL logic port on the pump

Quick and simple setup



SyringePump.com

Continuous Infusion/Dual NE-1000

Syringe Pump - $1510

Description:

Two NE-1000 Family of Syringe Pumps connected together are often used in dual-pump setups, possibly with check valves for continuous pumping or mixing so that one syringe dispenses while the other reloads. Gives customer flexibility to separate pumps for individual use.

• Dual NE-1010: $1670

• Dual NE-4000: $1960

• Dual NE-1600/1800: $3010

• Dual NE-1002X: $3010

10

Includes all of the features of the NE-1000 family of pumps

Dual Pump Plumbing Kit

Description:

For use with our continuous infusion system or dual infusion system

Provides a dual check valve for two syringes, withdraw will pull fluid from a reservoir and infusion will output into a separate line

The kit is pre-assembled, all you need to do is plug in the syringes

Each dual check valve uses 6" of 1/8" tubing to connect to a Y connector, one for reservoir and one for output; each Y-connector has

5' of tubing to make connections to your application.

Two 60 cc Terumo syringes are included.

Individual parts are also available.

Model: P-DKIT

Price: $20/USA



SyringePump.com

Continuous NE-1000X- $1720

(Model: Dual-NE-1000X)

The Next Generation

Continuous Infusion Syringe Pump System

Eliminates Flow Rate Pauses & Drop-Offs!

Eliminates the problem of flow rate drop-off found in "Push-Pull" syringe pumps. In these "Push-Pull" systems, one pump is refilling while the other infuses and then they switch directions. That switch of directions causes a pause or drop in flow. The Continuous NE-1000X's continuous pumping mode eliminates the flow rate drop offs and pauses.

How it Works:

Refilling pump refills the syringe at a faster rate than the infusing pump, giving it time to prime the syringe.

Refilling pump pauses and waits for the infusing pump to empty.

When the pumps switch directions, the refilled pump is primed and starts infusing at the set rate immediately.

Features:

Two NE-1000X Family of Syringe Pumps connected together via a Dual Pump Sync Cable.

Continuous Pumping Mode provides a precise continuous flow without any drop-offs of pauses.

Programmable infusion, refill and prime rates and syringe overlap and prime volumes.

Flexibility for the pumps to perform either continuous flow, emulsification, or independently at any time.

NE-1000X Family of Syringe Pumps Features






Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer


Network, control, and monitor up to 100 pumps with one computer

Gradient ramping of flow rates

Worldwide power supplies available

Motor stall detection

Non-volatile memory of all parameters and programming

Upgradeable to 340 pumping phases program memory with the X2 Upgrade

Dispensing accuracy of +/-1%

Unlimited lifetime technical support

Two year warranty

Plus many, many more features!

Dual Pump Plumbing Kit - Model: P-DKIT

For use with our continuous infusion system or dual infusion system.

Provides a dual check valve for two syringes, withdraw will pull fluid from a reservoir and infusion will output into a separate line.

The kit is pre-assembled, all you need to do is plug in the syringes.

Each dual check valve uses 6" of 1/8" tubing to connect to a Y connector, one for reservoir and one for output; each Y-connector has 5' of tubing to make connections to your application.

Two 60cc Terumo syringes are included.

Individual parts are also available.


11


SyringePump.com

Upgrade Options

Higher Pressure, Speed & Power Upgrade Options

X Version Upgrade

Upgraded Features to the standard NE-1000 firmware:

- Linear/Gradient Program Function

- Dual Pump Next Generation Continuous Pumping Mode

- Dual Pump Constant Flow Rate Gradient Pumping Mode

- Additional programming functions for more complex pumping programs

- Syringe Pumps, Syringes & Plumbing Supplies sold separately

- Any syringe pump can be field upgraded except for the NE-300

MODEL: FW-1-X is only available for the NE-1000 series models

MODEL: FW-5-X is only available for the NE-500 series models

(NE-1000 series models included are the NE-1000, NE-4000 and the Multi-Pumps)

MODEL: CBL-DUAL-3 is required to connect 2 pumps for use with dual pump modes

Price: $105

Price: $55

Price: $20

X2 Version Upgrade: Increases the maximum number of programmable pumping phases from 41 to 340.

MODEL: FW-1-X2 is only available for the NE-1000 series models

(NE-1000 series models included are the NE-1000, NE-4000 and the Multi-Pumps)

Price: $205

MODEL: FW-5-X2 Price: $110

FW-1-X2 is only available for the NE-500 series models

Linear/Gradient Function Pump Features:

- Smooth linear increasing or decreasing gradient pumping

- Set the start pumping rate, end pumping rate and the time

- Pre-program multiple gradients including any other NE-1000 programming feature

Requirements for Dual Pump Modes:

- Any combination of 2 syringe pumps with X firmware upgrades

- Dual pump communications cable Model # CBL-DUAL-3

Linear Gradient

The Next Generation Continuous Infusion System eliminates the problem of flow rate drop offs and pauses caused by push-pull syringe pumps. Please visit our Continuous NE-1000X page and learn how the system works.

Constant Flow Rate

Constant Flow Rate Gradient Pumping Mode:

- Set pump 1 linear function

- Pump 2 automatically pumps inversely to pump 1

- Sum of pump 1 and pump 2 flow rates remains a constant rate

12



SyringePump.com

Syringe Heater Kit - $399

13

Model: HEATER-KIT-1LG

Price: $399

Model: HEATER-PAD2-1LG

Price: $100

Description for HEATER-KIT-1LG:

Heating device for syringes that requires temperature-controlled dispensing. Heats up to 185°C.

Compatibility Notes:

Please contact us at 631-249-1392 or [email protected]

about pump compatibility when heating syringes above

100°C. Customization may be required.

If you are in a country where the voltage is above 120V, you must purchase a step-down transformer with the Heater Kit.

Digitally set the heater set point

Temperature sensor in heating pad

Set point and other parameters retained in memory

Controller will heat the syringe and hold the set temperature using an on/off or Thermo-kinetic control algorithm.

Multiple syringe heater pads can be attached to the control unit, under restricted conditions.

Heated syringe can be mounted on a syringe pump. Please call 631-249-1392 for compatibility.

Dual temperature sensors in primary heating pad.

Heater Kit includes Control-Unit power cable and Primary-Syringe-Heater-Pad.

Description for HEATER-PAD2-1LG:

For attaching a second heating pad to HEATER-KIT-1LG. Temperature is sensed in primary heating pad only.

Compatibility Notes:

Heater pad measures 75 mm x 75 mm

Each syringe heater control unit uses only the primary heating pad to sense temperature. All secondary heater pads connected to that control unit function according to temperature at the primary heater pad. Careful consideration should be taken when using secondary/slave heater pads. For different temperatures or variable environments, use separate control units with primary heater pads.

Plugging more than 12 Syringe-Heater-Pads onto one Controller is not recommended

Model: HEATER-PAD3-1LG

Price: $100

Description for HEATER-PAD3-1LG:

For attaching additional, up to 12 total, heating pads to HEATER-KIT-1LG with HEATER-PAD2-1LG

Temperature sensed in primary heating pad only


New Era Pump Systems, Inc.

Featured Accessory: Anabox Analog Sensor Interface

Sample Anabox Operational Modes:

Ramping (gradient) with Voltage

Phone: 631-249-1392

SyringePump.com

Start Pump at Voltage Trigger

14

Stop Pump at Voltage Trigger

Start Pump within Voltage

Model: ADPT-ANABOX-11

Price: $99

Pressure Controlled Infusion

Automatically varies the pumping rate to maintain a pressure by utilizing your pressure sensor with a voltage output.

ANABOX CLOSED LOOP ANALOG SENSOR INTERFACE

Vary the pumping rate in proportion to a variable voltage input

Start or stop pump at set voltages

Vary the pumping rate to maintain a voltage window

(i.e. maintain a pressure or pH level)

Attaches to any pump in the NE-1000 Family

Operates stand alone. Does not need a computer to operate.

Optionally outputs event data to a computer for data logging

Stop Pump within Voltage

Foot Switch

Description:

Start, stop, or send a signal to a pumping program.

Compatible with any New Era pump excluding the NE-300 Just Infusion

Utilizes the TTL logic port on the pump


20 ft. length cable

Model: ADPT-FOOTSW-2

Price: US $25



SyringePump.com

Valve Control Boxes

Single Valve Control Box

Description:

Attach your 12V DC valve and the control box will open or close your valve according to the pumping direction

Utilizes the TTL logic port on syringe pump

Includes power supply for valve

Model: ADPT-VALVE-INTERFACE-1

Price: US $85

15

Dual Valve Control Box

Description:

Attach your two 12V DC valves and the control box will open or close your valves according to the pumping directions of your two pumps

Includes CBL-TTL-1 cable to allow synchronized pumping between two pumps

Utilizes the TTL logic ports on both syringe pumps

Includes power supply for valves

Model: ADPT-VALVE-INTERFACE-2

Price: US $100



SyringePump.com

Pump Cables & Accessories

Pump-to-PC Primary Network Cable Description:

Allows full control over syringe pumps through your computer

DB-9 adapter connects to 9-pin serial port

(25-pin adapters available upon request)

Utilizes the RS-232 communications port of syringe pump

Available in 7' and 25' length cable


Model: CBL-PC-PUMP-25

Price: $17 (25 ft. cable)

Model: CBL-PC-PUMP-7

Price: $15 (7ft. cable)

16

Pump-to-Pump Secondary Network Cable

Model: CBL-NET-25

Price: $4 (25 ft. cable)

Model: CBL-NET-7

Price: $2 (7ft. cable)

Description:

Allows networking of two or more syringe pumps to a single computer


Utilizes the RS-232 communications port of syringe pump

Available in 7' and 25' length cable

Requires first pump to be connected with primary network cable

RS-232 to USB Converter

Description:

Adapter to add a DB-9 RS-232 serial port to your computer by using an USB port

Includes software driver CD

Model: CBL-USB232

Price: US $10

Lockout Disable Key

Description:

For use with the syringe pump's Lockout Mode

Prevent unauthorized or accidental changes to the settings by locking the keypad

Unlocks the keypad and allows settings to be changed

Utilizes the TTL logic port on syringe pump

Quick and easy setup

Model: ADPT-LOCKOUT

Price: US $10

Pump Synchronization Cable

Description:

Used for creating a continuous or dual infusion system

Establishes a communications link between two pumps to duplicate the exact or inverse commands issued to one pump.

Utilizes the RS-232 logic port on syringe pump


This is the new replacement cable for CBL-TTL-1 unless the use of the TTL ports for synchronization is preferred

Model: CBL-DUAL-3

Price: US $20



SyringePump.com

17

Syringe Pump Control Software

Control programmable infusion syringe pumps including Microfluidic, Peristaltic and OEM models.

SyringePumpPro is an easy to use computer interface for programmable syringe pumps. It permits faster programming and operation of one or more pumps.

You can create pump programs and upload them to your pumps.

Experience friendly effective software support like never before.

Synchronously start and stop multiple pumps

Configure and control multi-pump protocols

Eliminates hours of manual pump operation

Monitor pump parameters

Upload pump programs

End front panel button mashing

OEM Pump? No Keypad?

Send commands to one or many pumps

No more re-typing of commands in terminal software

Quick and easy to use interface for communicating with your pumps

Compatible with following brands



SyringePump.com

Disposable Syringes & Kits

New Era supplies an assortment of disposable plastic syringes between

1mL to 140mL from Monoject, NormJect, Terumo & Excel. You can receive discounts in box quantities.

Note: Inert syringes are non-reactive syringes made from polypropylene and polyethylene. Inert syringes do not contain any latex, rubber, silicone oil, styrene or DEHP.

Description (mL=CC) Part #

140 mL Luer Lock Non-Inert SYR-MJ140LL

60 mL Luer Lock Non-Inert SYR-TER60LL

50 mL Luer Lock Inert SYR-NJ50LL

30 mL Luer Lock Inert





1 mL Luer-Lock Non-Inert

1 mL Tuberculin Inert

SYR-NJ30LL

SYR-NJ20LL

SYR-NJ10LL

SYR-NJ5LL

SYR-NJ3LL

SYR-EX1LL

SYR-TB1

Large Syringe Kit

Model: P-SYRKIT-LG

(2) 20mL Luer Lock Inert


(2) 60mL Terumo Luer Lock Non-

Inert

(6) Female Luer Barbs

(3) Male Luer Barbs

(20 ft) Tubing .125" ID, .188" OD,

PVC

Price

Each

Box Part #

$4.95 SYR-MJ140LLBX

$1.25 SYR-TER60LLBX

$1.75 SYR-NJ50LLBX

$1.25 SYR-NJ30LLBX

$0.75 SYR-NJ20LLBX

$0.50 SYR-NJ10LLBX

$0.40 SYR-NJ5LLBX

$0.35 SYR-NJ3LLBX

$0.40 SYR-EX1LLBX

$0.25 SYR-EX1LLBX

Box Price

$85.00 (20 per Box)

$18.75 (25 per Box)

$37.50 (30 per Box)

$40.00 (50 per Box)

$55.00 (100 per Box)

$40.00 (100 per Box)

$30.00 (100 per Box)

$25.00 (100 per Box)

$30.00 (100 per Box)

$20.00 (100 per Box)

Small Syringe Kit

Model: P-SYRKIT-SM





(6) Female Luer Barbs

(3) Male Luer Barbs

(20 ft) Tubing .125" ID, .188" OD, PVC

Dual Pump Plumbing Kit

Model: P-DKIT

For use with our continuous infusion system or dual infusion system (Dual-NE-1000). Provides a dual check valve for two syringes, withdraw will pull fluid from a reservoir and infusion will output into a separate line.

The kit is pre-assembled, all you need to do is plug in the syringes.

Each dual check valve uses 6" of 1/8" tubing to connect to a Y connector, one for reservoir and one for output; each Y-connector has 5' of tubing to make connections to your application.

Two 60cc Terumo syringes are included.

18



SyringePump.com

Glass Syringes: Standard & Gas Tight

New Era supplies a full range of glass syringes from 50µL to 100mL in gas tight quality and 1mL to

100mL in standard quality. Standard glass can handle between 22 to 43psi while the gas tight can handle from 100psi to upwards of 400psi depending on the syringe.

Standard Glass Syringes

Part #

SYR-GL1LL

SYR-GL2LL

Size

1mL

2mL

PSI/KPA Limits Temp

Limits

43.5 / 300

43.5 / 300

200°C

200°C

Price Each

$30.00

$20.00

SYR-GL3LL

SYR-GL5LL

3mL

5mL

43.5 / 300

43.5 / 300

SYR-GL10LL 10mL 29 / 200

SYR-GL20LL 20mL 29 / 200

SYR-GL30LL 30mL 29 / 200

200°C

200°C

200°C

200°C

200°C

$20.00

$20.00

$28.00

$30.00

$54.00

SYR-GL50LL 50mL 21.8 / 150

SYR-GL100LL 100mL 21.8 / 150

200°C $75.00

200°C $275.00

Tips are Metal Luer Lock

Barrel and plunger are made from Borosilicate Glass and are interchangeable

Manufactured in Germany

Chemically compatible for a wide range of applications

Good basic reusable syringe

SGE Gas Tight Glass Syringes

Part # Size

SYR-GL50MCLL-S 50uL

SYR-GL100MCLL-S 100uL



SYR-GL1LL-S

SYR-GL2.5LL-S

SYR-GL5LL-S

SYR-GL10LL-S

1mL

2.5mL

5mL

10mL

400 / 2758

400 / 2758

400 / 2758

400 / 2758

400 / 2758

400 / 2758

400 / 2758

200 / 1379

SYR-GL25LL-S

SYR-GL50LL-S

25mL

50mL

100 / 689

100 / 689

SYR-GL100LL-S 100mL 100 / 689

PSI/KPA Limits Temp

Limits

70°C

70°C

70°C

70°C

70°C

70°C

70°C

70°C

70°C

120°C

120°C

Price Each

$59.00

$59.00

$57.00

$54.50

$56.50

$54.00

$51.90

$71.50

$162.50

$205.00

$303.00

Longest working life in the industry

All SGE syringes come with metal Fixed

Luer Lock Tips except for the 50 & 100 mL which are removable.

Suitable for chromatography applications

Barrel made from Borosilicate Glass

PTFE tipped plunger

Able to replace the plunger

Nickel plated brass barrel flange

Manufactured in Australia

Chemically compatible for a wide range of applications.

19



SyringePump.com

Stainless Steel Syringes

New Era supplies a full range of stainless syringes from 1mL to 200mL. The syringes can handle 750psi (1500psi for the 8ml), high temperatures and highly corrosive chemicals. Highly corrosive chemicals may require an upgrade in O’Ring.

Part #

SYR-SS1

SYR-SS1SL8

SYR-SS1SL16

SYR-SS1LL

SYR-SS3

Size

1 mL

1 mL

1 mL

1 mL

3mL

PSI Included Fitting Price each

750 None, 1/4-28 Thread $325.00

750 1/8 SwageLok $385.00

750 1/16 SwageLok $385.00

750 Luer-Lok $385.00

750 None, 1/4-28 Thread $365.00

SYR-SS3SL8

SYR-SS3SL16

SYR-SS3LL

SYR-SS5

SYR-SS5SL8

SYR-SS5SL16

SYR-SS5LL

SYR-SS8

SYR-SS8SL8

SYR-SS8SL16

SYR-SS8LL

SYR-SS20

SYR-SS20SL4

3mL

3mL

3mL

5 mL

750 1/8 SwageLok

750 1/16 SwageLok

$425.00

$425.00

750 Luer-Lok $425.00

750 None, 1/4-28 Thread $400.00

5 mL

5 mL

750

750

1/8 SwageLok

1/16 SwageLok

$475.00

$475.00

5 mL 750 Luer-Lok $475.00

8mL 1500 None, 1/4-28 Thread $400.00

8mL 1500 1/8 SwageLok


$475.00

$475.00

8mL 1500 Luer-Lok $475.00

20mL 750 None, 3/8-24 Thread $510.00

20mL 750 1/4 SwageLok $575.00

SYR-SS20SL8

SYR-SS20SL16

SYR-SS20LL

SYR-SS50

SYR-SS50SL4

SYR-SS50SL8

SYR-SS50SL16



20mL 750 Luer-Lok




$575.00

$575.00

$575.00

50mL 750 None, 3/8-24 Thread $595.00

$650.00

$650.00

$650.00

SYR-SS50LL

SYR-SS100

50mL 750 Luer-Lok

SYR-SS100SL4 100mL 750 1/4 SwageLok

$650.00

100mL 750 None, 3/8-24 Thread $685.00

$750.00



SYR-SS100LL 100mL 750 Luer-Lok

$750.00

$750.00

$750.00

Part # Size PSI Included Fitting Price each

SYR-SS200 200mL 750 None, 3/8-24 Thread $750.00

SYR-SS200SL4 200mL 750 1/4 SwageLok $825.00

SYR-SS200SL8 200mL 750 1/8 SwageLok $825.00


SYR-SS200LL 200mL 750 Luer-Lok

$825.00

$825.00

Stainless Steel Syringe O-Rings

Stainless steel syringes come standard with a Viton O-Ring. Chemraz® O-Rings are ordered separately and are for applications requiring higher chemical resistance.

Part # Description

SYRP-SSORV5 Viton, 5mL Replacement O'Rings

SYRP-SSORK5 Chemraz® 5mL O'Rings

Price each

$25.00

$250.00

SYRP-SSORV8 Viton 1, 3 & 8mL Replacement O'Rings $25.00

SYRP-SSORK8 Chemraz® 1, 3 & 8mL O'Rings

SYRP-SSORV20 Viton, 20mL Replacement O'Rings


SYRP-SSORV50 Viton 50mL Replacement O'Rings






Stainless Steel Syringe Fittings

You can buy stainless steel syringes with or without fittings. They are also available to be purchased separately if needed. All fittings are pressure rated for all syringes they connect to.

Need to heat your syringe?

$250.00

$25.00

$270.00

$25.00

$420.00

$25.00

$420.00

$25.00

$460.00

The Syringe Heater Kit, you can find in the accessory section will heat all sizes of syringes up to 220°C.


20

New Era Pump Systems Inc.

Phone: 631-249-1392

SyringePump.com

21

New Era Pump Systems, Inc.

138 Toledo St

Farmingdale, NY 11735-6625

Phone: 631-249-1392

Fax: 707-248-2089

Email: [email protected] www.syringepump.com


New Era Pump Systems, Inc. The NE-1000 Family of Syringe Pumps

New Era Pump Systems, Inc.

2012 Catalog

Table of Contents

Syringe & Peristaltic Pumps

Upgrades & Accessories

NE-1000 Fully Programmable Family of Syringe Pumps

NE-1000 NE-500 NE-4000 NE-1600 NE-1800

NE-1002X NE-4500 NE-4002X NE-1200 Dual-NE-1000

NE-9000 Peristaltic

Dispensing Pump $500

Featuring

Learn & Repeat™

for

Fantastic Productivity!

Description:

Features:

NE300 Just Infusion™ Syringe Pump

Infuses Only!

Just the features that you want and none that you don’t want to pay for

-Does not withdraw, volume target, have computer interface or have programmability

3 Easy Steps!

1. Set the syringe diameter

2. Set the infusion rate

3. Start the pump

NE-1000 Single Syringe Pump - $750

High Pressure Syringe Pump

Continuous Infusion

Syringe Pump System

Microfluidics Double

Syringe Pump

NE-1000 Features:

The NE-1000 Family of Syringe Pumps Features

NE-4000 Double Syringe Pump - $975

Continuous Infusion

Double Syringe Pump System

Microfluidics Double

Syringe Pump

BUILT FOR AUTOMATION

NE-4000 Features:

The NE-1000 Family of Syringe Pumps Features

Multi Syringe Pumps - $1500

NE-1200: $1500

DUAL-NE-1200: $3010

NE-1600: $1500

DUAL-NE-1600: $3010

NE-1800: $1500

DUAL-NE-1800: $3010

The NE-1000 Family of Syringe Pumps Features

NE-1002X Microfluidics Syringe Pump - $1500

Continuous Infusion Microfluidics

Syringe Pump System

OEM Microfluidics Syringe Pump

NE-1002X Features:

Advance Per Step: 4.252232 Nanometers

The NE-1000 Family of Syringe Pumps Features

OEM Syringe Pumps NE-500 Starting at $495

OEM Syringe Pump Accessories

OEM Starter & Net Kits

Foot Switch

Continuous Infusion/Dual NE-1000

Syringe Pump - $1510

Includes all of the features of the NE-1000 family of pumps

Dual Pump Plumbing Kit

Continuous NE-1000X- $1720

The Next Generation

Continuous Infusion Syringe Pump System

Upgrade Options

Higher Pressure, Speed & Power Upgrade Options

X Version Upgrade

Syringe Heater Kit - $399

Foot Switch

Valve Control Boxes

Single Valve Control Box

Dual Valve Control Box

Pump Cables & Accessories

Syringe Pump Control Software

Disposable Syringes & Kits

Glass Syringes: Standard & Gas Tight

Standard Glass Syringes