Philips HTL2140B/F7 User manual

Always there to help you

Register your product and get support at www.philips.com/support

Question?

Contact

HTL2140B

User manual

For further assistance, call the customer support service in your country.

• To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact Philips

Customer Care Center at 1 (866) 226-6074

• To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 839 1989

For Product recycling information, please visit - www.recycle.philips.com

Contents

1 Important

Help and support

Important safety instructions

Care for your product

Care of the environment

2 Your product

Main unit

Remote control

Connectors 6

Wireless subwoofer

4

4

5

6

3 Connect

7

Placement 7

Pair up with the subwoofer 7

Connect audio from TV and other devices 7

2

4

2

2

4

4 Use your product

Adjust the volume

Choose your sound

MP3 player

USB storage devices

Play music via Bluetooth

Auto standby

Apply factory settings

5 Wall mount

6 Product specifications

7 Troubleshooting

8 Notice

12

13

14

15

10

11

12

12

9

10

9

9

EN

1

1 Important

Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply.

Help and support

For extensive online support, visit www.philips.com/support to:

• download the user manual and the quick start guide

• watch video tutorials (available only for selected models)

• find answers to frequently answered questions (FAQs)

• email us a question

• chat with our support representative.

Follow the instructions on the website to select your language, and then enter your product model number.

Alternatively, you can contact Consumer Care in your country. Before you contact, note down the model number and serial number of your product. You can find this information on the back or bottom of your product.

Important safety instructions

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings.

Install in accordance with the manufacturer's instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storm or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Battery usage CAUTION - To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit:

2

EN

• Install all batteries correctly, + and - as marked on the unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.).

• Remove batteries when the unit is not used for a long time.

• The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate.

• The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death.

Severe internal burns can occur within two hours of ingestion.

• If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.

• When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery.

• If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer.

• Apparatus shall not be exposed to dripping or splashing.

• Do not place any sources of danger on the apparatus (for example. liquid filled objects, lighted candles).

• This apparatus may contain lead and mercury. Dispose according to local,

State or Federal laws. For disposal or recycling information, please contact your local authorities. For additional assistance on recycling options, please contact www.mygreenelectronics.com or www.eiae.org or www.recycle.philips.com.

• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

• Do not place this apparatus on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling apparatus can cause serious injury or even death.

• This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.

Make sure to leave a space of 7.8 inches

(20cm) or more around this apparatus.

Class II equipment symbol

This symbol indicates that the unit has a double insulation system.

Know these safety symbols

This 'bolt of lightning' indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

The 'exclamation point' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.

WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.

EN

3

4

EN

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Care for your product

Use only microfiber cloth to clean the product.

Care of the environment

Disposal of your old product and battery

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

This product may contain lead and mercury.

Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or visit www.recycle.philips.com.

This product contains batteries:

• Dispose of batteries properly. Do not incinerate. Batteries may explode if overheated.

• Do not wrap in metal or aluminum foil.

Wrap in newspaper before discarding.

• It is suggested that you contact your local town or city to determine proper battery redemption site(s) in your area.

• Please visit www.call2recycle.org for additional information on a recycling center in your area for rechargeable batteries.

2 Your product

Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Main unit

This section includes an overview of the main unit.

a b c d e a

STANDBY

• Lights up when this product is in standby.

• Blinks three times when Dolby Digital audio is input.

b

COAX / AUX

• Lights up when you switch to coaxial or AUX (red/white jacks) input source.

• Blinks continuously when unsupported digital audio format is detected. c

OPT / AUDIO IN

• Lights up when you switch to optical or AUDIO IN (3.5mm jack) input source.

• Blinks continuously when unsupported digital audio format is detected.

d

USB

Lights up you switch to USB source.

e

Remote control

• Lights up when you switch to

Bluetooth mode and Bluetooth devices are paired.

• Blinks when Bluetooth devices are not paired.

This section includes an overview of the remote control.

a b c d e f g h i j a

• Switch this product on or to standby.

k

• When this product is switched on, all the LED indicators light up one by one, then only the current source indicator stays on.

• When this product is switched to standby, all the LED indicators light up, then light off one by one, finally the standby indicator stays on.

b

Source buttons

• COAX: Switch your audio source to the coaxial connection.

• OPTICAL: Switch your audio source to the optical connection.

• AUDIO IN: Switch your audio source to the AUDIO IN/MP3 connection

(3.5mm jack).

• USB: Switch your audio source to the

USB connection.

• : Switch to Bluetooth mode.

• AUX: Switch your audio source to the

AUX connection. c

/

Skip to the previous or next track in USB mode and Bluetooth mode (only for

AVRCP-supported Bluetooth devices).

d

Start, pause or resume play in USB mode and Bluetooth mode ( only for AVRCPsupported Bluetooth devices).

e

BASS +/-

Increase or decrease bass.

f

Volume control

• +/-: Increase or decrease volume.

• : Mute or restore volume.

g

SOUND

Select a predefined sound option.

h

SURROUND ON/OFF

Select surround or stereo sound i

AUDIO SYNC +/-

Increase or decrease audio delay.

j

NIGHT ON/OFF

Turn night mode on or off.

EN

5

6

EN k

TREBLE +/-

Increase or decrease treble.

Connectors

This section includes an overview of the connectors available on this product.

a a b c f e d

Connect to a USB storage device for audio media play.

b

AUDIO IN

Connect to an audio output (3.5mm jack) on an external device (such as MP3).

c

AC MAINS~

Connect to the power supply.

d

OPTICAL

Connect to an optical audio output on the

TV or a digital device. e

AUX

Connect to an analog audio output on the

TV or an analog device. f

COAXIAL

Connect to a coaxial audio output on the

TV or a digital device. a b c

Wireless subwoofer

This product comes with a wireless subwoofer.

a

CONNECT (connect)

Press to enter the pairing mode for the subwoofer.

b

Subwoofer indicator

• When the power is turned on, the indicator lights up.

• During wireless pairing between the subwoofer and the main unit, the indicator blinks white quickly.

• When the pairing succeeds, the indicator lights up white.

• When the pairing fails, the indicator blinks white slowly.

• When wireless connection is disconnected for 4 minutes, the indicator turns off.

c

AC MAINS~

Connect to the power supply.

3 Connect

This section helps you connect this product to a

TV and other devices.

For information about the basic connections of this product and accessories, see the quick start guide.

Note

•

For identification and supply ratings, see the type plate at the back or bottom of the product.

•

Before you make or change any connections, make sure that all devices are disconnected from the power outlet.

Placement

Place the subwoofer at least 1 meter (3 feet) away from this product, and ten centimeters away from the wall.

For best results, place your subwoofer as shown below.

Pair up with the subwoofer

The wireless subwoofer automatically pair up with the main unit for wireless connection when you turn on the main unit, and the subwoofer.

If no audio from the wireless subwoofer can be heard, do the following for pairing.

1

Turn on the main unit, and the subwoofer.

»

If the connection to the main unit is lost, the white LED on the subwoofer blinks slowly.

2

Press the CONNECT (connect) button on the subwoofer to enter the pairing mode.

» The white LED on the subwoofer blinks quickly.

3

In Bluetooth mode (press ) , within six seconds, on the remote control, press twice then BASS + once, and then hold down SURROUND ON.

»

If the pairing succeeds, the white LED on the subwoofer lights up.

» If the pairing fails, the white LED on the subwoofer blinks slowly.

4

If the pairing fails, repeat the steps above.

Connect audio from TV and other devices

Play audio from TV or other devices through this product.

Use the best quality connection available on your TV and other devices.

EN

7

8

EN

Option 1: Connect audio through a digital optical cable

Best quality audio

1

Using an optical cable, connect the

OPTICAL connector on this product to the OPTICAL OUT connector on the TV or other device.

• The digital optical connector might be labeled SPDIF or SPDIF OUT.

TV

Option 2: Connect audio through a digital coaxial cable

Best quality audio

1

Using a coaxial cable, connect the

COAXIAL connector on this product to the COAXIAL/DIGITAL OUT connector on the TV or other device.

• The digital coaxial connector might be labeled DIGITAL AUDIO OUT.

Option 3: Connect audio through analog audio cables

Basic quality audio

1

Using an analog cable, connect the AUX connectors on this product to the AUDIO

OUT connectors on the TV or other device.

DVD

4 Use your product

This section helps you use this product to play audio from connected devices.

Before you start

• Make the necessary connections described in the Quick Start Guide or download the User Manual from www.philips.com/support.

• Switch this product to the correct source for other devices.

Adjust the volume

1

Press Volume +/- to increase or decrease a volume level.

• To mute sound, press .

• To restore the sound, press again or press Volume +/-.

Volume indicator

• The higher volume level you change to, the more LED indicators light up. If you do not press the volume button for three seconds, the volume indicators light off.

• All the LED indicators blink three times when a volume level is set to the maximum or minimum.

• When sound is muted, the current source indicator blinks.

Choose your sound

This section helps you choose the ideal sound for your video or music.

Sound mode

Select predefined sound modes to suit your video or music.

1

Press SOUND to toggle the following predefined sound settings.

• Powerful: If selected, STANDBY LED lights up for three seconds. Enjoy thrilling arcade sounds, ideal for actionpacked videos and loud parties.

• Bright: If selected, COAX/AUX LED lights up for three seconds. Spice up your dull movies and music with added sound effects.

• Clear: If selected, OPT/AUDIO IN

LED lights up for three seconds. Hear every detail in your music and clear voices in your movies.

• Personal: If selected, USB LED lights up for three seconds. Personalize the sound based on your preferences.

• Balanced: If selected, LED lights up for three seconds. Experience the original sound of your movies and music, without added sound effects.

Surround sound mode

Experience an immersive audio experience with surround sound modes.

1

Press SURROUND ON/OFF to turn surround mode on or off.

• On: Create virtual surround sound.

Ideal for watching movie.

• Off: Create stereo sound. Ideal for listening to music.

Surround mode indicator

• If surround mode is turned on, all the LED indicators light up one by one, then only the current source indicator stays on.

• If surround mode is turned off, all the

LED indicators light up, then light off one by one. Finally only the current source indicator stays on.

EN

9

Equalizer

Change the high frequency (treble) and low frequency (bass) settings of this product.

1

Press TREBLE +/- or BASS +/- to change the treble or bass.

Treble/bass indicator

• The more treble/bass you change to, the more LED indicators light up. If you do not press the treble/bass button for three seconds, the treble/bass indicators light off.

• All the LED indicators blink three times when treble or bass is set to the maximum or minimum value.

Synchronize video and sound

If the audio and video are not synchronized, delay the audio to match the video.

1

Press AUDIO SYNC +/- to synchronize the audio with the video.

• AUDIO SYNC + increases the sound delay, and AUDIO SYNC - decreases the sound delay.

Sound delay indicator

• The more delay you change to, the more

LED indicators light up. If you do not press the sound delay button for three seconds, the sound delay indicators light off.

Note

•

This feature is only applicable to COAXIAL (COAX) and OPTICAL (OPT) sources.

Night mode

For quiet listening, night mode decreases the volume of loud sounds when audio is played.

Night mode is only available for Dolby Digital soundtracks.

1

Press NIGHT ON/OFF to turn night mode on or off.

10 EN

Night mode indicator

• If night mode is turned on, all the LED indicators light up one by one, then only the current source indicator stays on.

• If night mode is turned off, all the LED indicators light up, then light off one by one. Finally the current source indicator stays on.

MP3 player

Connect your MP3 player to play your audio files or music.

What you need

• An MP3 player.

• A 3.5mm stereo audio cable.

1

Using the 3.5mm stereo audio cable, connect the MP3 player to the AUDIO IN connector on this product.

2

Press AUDIO IN.

3

Press the buttons on the MP3 player to select and play audio files or music.

• On the MP3 player, it is recommended to set the volume in the range of 80% maximum volume.

USB storage devices

Enjoy audio on a USB storage device, such as an

MP3 player and USB flash memory, etc.

What you need

• A USB storage device that is formatted for

FAT or NTFS file systems, and complies with the Mass Storage Class.

• An MP3 file on a USB storage device

1

Connect a USB storage device to this product.

2

Press USB on the remote control.

3

Use the remote control to control play.

Button Action

/

USB

Start or pause or resume play.

Skip to the previous or next track.

During play, press to toggle: repeat one track and repeat off.

Repeat play indicator

• If repeat mode is turned on, all the

LED indicators light up for one second, then the current source indicator stays on.

• If repeat mode is turned off, all the

LED indicators light up, then light off one by one. Finally the current source indicator stays on.

Note

•

This product may not be compatible with certain types of USB storage device.

•

If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized.

•

Digital camera PTP and MTP protocols are not supported.

•

Do not remove the USB storage device while it is being read.

•

DRM-protected music files (MP3) are not supported.

•

Support a USB port: 5V , 1A.

Play music via Bluetooth

Through Bluetooth, connect your product with a Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through the speakers of this product.

What you need

• A Bluetooth device which supports

Bluetooth profile A2DP, and with Bluetooth version as 4.1.

• The operational range between the main unit and a Bluetooth device is approximately 10 meters (30 feet).

1

Press on the remote control to switch this product to Bluetooth mode.

»

The indicator blinks.

2

On the Bluetooth device, switch on

Bluetooth, search for and select PHILIPS

HTL2140 to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth).

• When prompted for a password, enter

"0000".

» During connection, the indicator blinks.

3

Wait until the indicator lights up.

» If the connection fails, the indicator blinks continually.

4

Select and play audio files or music on your Bluetooth device.

• During play, if a call is coming, music play is paused. Play resumes when the call ends (this feature is dependent on the connected mobile phone).

• If your Bluetooth device supports

AVRCP profile, on the remote control you can press / to skip to a track, or press to pause/resume play.

5

To exit Bluetooth, select other source.

• When your switch back to Bluetooth mode, Bluetooth connection remains active.

Note

•

The music streaming may be interrupted by obstacles between the device and this product, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency.

•

If you want to connect this product with another

Bluetooth device, press and hold on the remote control to break the current Bluetooth connection.

EN

11

12 EN

Auto standby

When playing media from a connected device, this product automatically switches to standby after 15 minutes of button inactivity and no audio play from a connected device.

Apply factory settings

You can reset this product to the default settings programmed at the factory.

1

In AUDIO IN mode, on the remote control press Volume -, BASS -, and

TREBLE - in sequence within three seconds.

» When the factory settings restore is complete, the product automatically switches off and restarts.

5 Wall mount

Note

•

Before wall mounting, make sure the wall can support the weight of this product.

•

For wall mounting, this product must be securely attached to the wall in accordance with the installation instructions. Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country.

Screw length/diameter

Depending on the type of wall mounting this product, make sure that you use screws of a suitable length and diameter.

≤7.9 mm/

0.3”

3.2-3.6 mm/0.13”-0.14”

>25 mm/0.98”

See the illustration in the quick start guide on how to wall mount this product.

1) Drill two holes on the wall.

2) Secure the dowels and screws in the holes.

3) Hang this product on the fastening screws.

3.5-4 mm/

0.14”-0.16”

6 Product specifications

Note

•

Specifications and design are subject to change without notice.

Amplifier

• FTC total output power 34W

• Left + Right :

18W (1%THD, 8ohm, 400Hz-20kHz)

• Subwoofer:

16W (1%THD, 8ohm, 40Hz-100Hz)

• RMS total output power: 60W RMS

• Left +Right 30W

(10% THD 8 ohm +/- 0.5dB)

• Subwoofer 30W

(10% THD 8 ohm +/- 0.5dB)

• Frequency response:

20 Hz-20 kHz / +/-3 dB

• Signal-to-noise ratio:

> 65 dB (CCIR) / (A-weighted)

• Input sensitivity:

• AUX: 800mV

• AUDIO IN: 400mV

Audio

• S/PDIF Digital audio input:

• Coaxial: IEC 60958-3

• Optical: TOSLINK

• Sampling frequency:

• MP3: 32 kHz, 44.1 kHz, 48 kHz

• Constant bit rate:

• MP3: 112 kbps-320 kbps

USB

• Compatibility: Hi-Speed USB (2.0)

• Class support: USB Mass Storage Class

(MSC)

• File system: FAT16, FAT32, NTFS

• Supports MP3 file formats

Bluetooth

• Bluetooth profiles: A2DP

• Bluetooth version: 4.1

Main unit

• Power supply: 110-240 V~, 50/60 Hz

• Power consumption: 25 W

• Standby power consumption: ≤ 0.5 W

• Dimensions (W x H x D):

708 x 47 x 65 mm / 27.9" x 1.85" x 2.6"

• Weight: 1.0 kg

• Built-in speakers:

• 2 x racetrack midrange (122 mm/4.8" x 35 mm/1.4", 8 ohm)

• 2 x Mylar tweeter (25.4 mm/1", 8 ohm)

Subwoofer

• Power supply: 110-240 V~, 50-60 Hz

• Power consumption: 15 W

• Standby power consumption: ≤ 0.5 W

• Impedance: 8 ohm

• Speaker drivers:

1 x 133 mm (5.25") woofer

• Dimensions (W x H x D):

165 x 240 x 295 mm / 6.5" x 9.5" x 11.6"

• Weight: 2.6 kg

Remote control batteries

• 1 x AAA-R03-1.5 V

EN

13

7 Troubleshooting

Warning

•

Risk of electric shock. Never remove the casing of the product.

To keep the warranty valid, never try to repair the product yourself.

If you have problems using this product, check the following points before you request service.

If you still have a problem, get support at www.philips.com/support.

Sound

No sound from the speakers of this product.

• Connect the audio cable from this product to your TV or other devices.

• Make sure that you connect the audio input on this product to the audio output on your TV or other devices.

• Reset this product to its factory settings.

• On the remote control, select the correct audio input.

• Make sure that this product is not muted.

No sound from the wireless subwoofer.

• Wirelessly connect the subwoofer to the main unit.

Distorted sound or echo.

• If you play audio from the TV through this product, make sure that the TV is muted.

Audio and video are not synchronized.

• Press AUDIO SYNC +/- to synchronize the audio with the video.

Bluetooth

A device cannot connect with this product.

• The device does not support the compatible profiles required for this product.

• You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function.

• The device is not correctly connected.

Connect the device correctly.

• This product is already connected with another Bluetooth device. Disconnect the connected device, then try again.

Quality of audio play from a connected

Bluetooth device is poor.

• The Bluetooth reception is poor. Move the device closer to this product, or remove any obstacle between the device and this product.

The connected Bluetooth device connects and disconnects constantly.

• The Bluetooth reception is poor. Move the device closer to this product, or remove any obstacle between the device and this product.

• Turn off Wi-Fi function on the Bluetooth device to avoid interference.

• For some Bluetooth, the Bluetooth connection can be deactivated automatically to save power. This does not indicate any malfunction of this product.

14 EN

8 Notice

This section contains the legal and trademark notices.

Notice of compliance

The device complies with the FCC rules, Part

15. Operation is subject to the following two conditions: a

This device may not cause harmful interference, and b

This device must accept any interference received, including interference that may cause undesired operation.

FCC rules

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Relocate the receiving antenna.

• Increase the separation between equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of

20cm between the radiator and your body.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Warning: Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment.

Model number: HTL2140B/F7

Trade Name: Philips

Responsible Party:P&F USA, Inc. PO Box

2248 Alpharetta, GA 30023-2248; 1-866-226-

6074

Canada:

CAN ICES-3(B)/NMB-3(B)

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and

(2) This device must accept any interference, including interference that may cause undesired operation.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS

102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

EN

15

16

Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

The Bluetooth

®

word mark and logos are registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by Gibson is under license. Other trademarks and trade names are those of their respective owners.

ONE (1) YEAR LIMITED WARRANTY

WARRANTY COVERAGE:

This warranty obligation is limited to the terms set forth below.

WHO IS COVERED:

This product is warranted to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase

(“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.

WHAT IS COVERED:

This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warranty Period. At its option, the company will either (1) repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most comparable to the original product in current inventory, or (3) refund the original purchase price of the product.

The company warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the original product’s warranty, whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes the company property. When a refund is given, your product becomes the company property.

Note: Any product sold and identified as refurbished or renewed carries a ninety (90) day limited warranty.

Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay.

WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-

TATIONS:

This Limited Warranty applies only to the new products that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any non-Philips hardware product or any software, even if packaged or sold with the product. Non-Philips manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product.

The company is not liable for any damage to or loss of any , programs data, or other information stored on any media contained within the product, or any non-Philips product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this

Limited Warranty.

This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-Philips product, (b) to damage caused by service performed by anyone other than an Authorized Service Location, (c) to a product or a part that has been modified without written permission, or (d) if any serial number has been removed or defaced, or (e) product, accessories or consumables sold “AS IS” without warranty of any kind by including refurbished Philips product sold “AS IS” by some retailers.

This Limited Warranty does not cover:

• Shipping charges to return defective product.

• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna/signal source systems outside of the product.

• Product repair and/or part replacement because of improper installation or maintenance, connections to improper voltage supply, power line surge, lightning damage, retained images or screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other cause not within the control of the company.

• Damage or claims for products not being available for use, or for lost data or lost software.

• Damage from mishandled shipments or transit accidents when returning product.

• A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications.

• A product used for commercial or institutional purposes

(including but not limited to rental purposes).

• Product lost in shipment and no signature verification receipt can be provided.

• Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,

PUERTO RICO, OR U.S. VIRGIN ISLANDS…

Contact Customer Care Center at:

1 (866) 226-6074

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS

WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-

SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-

TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF

ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-

UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE

LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT

IS LIMITED IN DURATION TO THE DURATION OF THIS

WARRANTY.

Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

P&F USA Inc. PO Box 2248 Alpharetta, GA 30023-2248

17

P&F USA, Inc.

PO Box 2248 Alpharetta, GA 30023-2248

Specifications are subject to change without notice

2015 © Gibson Innovations Limited. All rights reserved.

This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson

Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.

HTL2140B_F7_UM_V1.0