Bluetooth Keyboard
Quick Start Guide
Bluetooth Keyboard
MODEL: PNDKBABT10
Product Features
This unique Bluetooth keyboard with a retractable stand is specially designed for the PendoPad,
Apple iPad, Apple iPhone, Android Tablets, Windows Tablets & Bluetooth enabled Smartphones.
It has a silent design, which will not affect other users around you.
The built-in Lithium ba ery allows up to 120 hours of use between charges.
Specifications
Bluetooth Standard
Bluetooth V 3.0
Working Distance
10 meters
Modula on System
FHSS 2.4G
Transmi ng Power
Class 2
Working Voltage
3.0V -5.0V
Working Current
<2.0 MA
Standby Current
2.5MA
Sleeping Current
<200UA
Charging Current
>200MA
Standby Time
90 days
Uninterrupted Working
120 hours
Charging Time
2.5-3 hours
Li-ion Ba ery Capacity
450mAh, 3.7V
Charging Cycles
5 million mes
Working Temperature
-20-+55°C
Storage Temperature
OS Support
-40-+70°C
Bluetooth Connection Indicator
Caps Lock Indicator
Charge Indicator
Android 3.0 and above
Apple IOS6(iPhone / iPad)
Windows XP
Windows Vista
Windows 7
Windows 8
Windows Mobile 6.5 and above
Note: Some func onality may not be supported by all opera ng systems
Boxed Contents
1. Bluetooth Keyboard
2. USB Charging Cable
3. User Manual
4. Warranty Card
Power and
Connect Bu on
Opening the Stand
1. Slide the stand out from under the keyboard as shown below.
2.
Lift the stand up from its support base by holding the end in the middle and gently lifting.
Note: the stand is secured by magnets, so there will be some initial resistance.
3.
Hold the stand at the desired angle, and then raise the inner support so that it can be inserted
into the desired slot to hold the stand in position.
4.
Once the stand is securely in place, your mobile device can be safely placed on the stand.
Note: Excess force should not be applied to the stand because this could cause damage to the
keyboard and any device being held up by the stand.
Connecting the Bluetooth Keyboard with a Device
Connecting to an Android Tablet
1.
Press the Power and Connect button for about 5 seconds until the power light has come on
and then started flashing blue, to indicate that the keyboard is advertising itself via
Bluetooth.
2.
Access Android Settings and touch on the “Bluetooth” setting and switch it On (see image
1).
3.
Once the tablet has finished finding all Bluetooth devices in the vicinity, select
“Bluetooth keyboard” by touching the entry in the list (see image 2).
Image1
Image2
4.
Type the number combination that is shown in the popup window on the keyboard and
press the Enter / Return key, in order to finish pairing with the keyboard (see image3).
5.
The keyboard will now show a status of “Connected” (see image4).
Image3
6.
Image4
The keyboard has now been successfully paired and whenever Bluetooth is enabled on the
tablet and the keyboard is turned on, it will automatically connect after a few seconds from
now on.
Connecting to an iPad or iPhone
1.
Press the Power and Connect button on the keyboard for about 5 seconds until the power
light has come on and then starts flashing blue, to indicate that the keyboard is advertising
itself via Bluetooth.
2.
On the iPad / iPhone, touch the “Settings” icon to enter the settings options.
3.
Touch on the “Bluetooth” option (see below).
Touch the “Settings” icon
Touch to access Bluetooth settings
4.
Set Bluetooth to On and the iPad / iPhone will search for all Bluetooth devices (see
below).
5.
Once the tablet has finished finding all Bluetooth devices in the vicinity, select
“Bluetooth keyboard” by touching the entry in the list (see below).
6.
Type the password that is shown in the popup window on the keyboard and press the Enter /
Return key, in order to finish pairing with the keyboard (see below).
The iPad / iPhone will search for all Bluetooth devices
Touch the Bluetooth keyboard and type the password shown on the keyboard
7.
The keyboard will now be successfully paired and whenever Bluetooth is enabled on the iPad
/ iPhone and the keyboard is turned on, it will automa cally connect a er a few seconds
from now on.
Note: To turn the keyboard on, hold down the Connect and Power bu on for a few seconds un l the
Bluetooth light appears. This light will disappear as soon as the keyboard has connected to an already
paired device, or if no device is found, it will automa cally turn off a er 5 seconds.
Function Switching
There are a number of user Func on keys, which can be enabled by pressing the FN key before
pressing them.
1.
Press FN+ (F1-F12) enables the func ons of F1-F12 within Windows;
2.
Press FN + ESC enables the func on of Web Searching on Windows;
3.
Entering Command + Space allows you to switch between different languages and input
methods.
Charging
When the keyboard is running low on power, the charge indicator will start flashing. This means that
it is me to charge the keyboard.
Charging Procedure
1.
Use the USB charging cable provided. Connect it to a USB charger, and then connect the
other end of the plug into the keyboard as follows.
Charge indicator
USB Port
2.
The charge indicator will glow red, indica ng it is charging. A er charging has finished, the
red indicator will turn off. Charging me is approximately 2.5 - 3 hours.
Storage
1.
When you have finished using your keyboard or are packing it away, please don't
forget to turn it off, in order to extend battery life.
2.
When the keyboard is not going to be used for an extended period of time, please don't
forget to charge your keyboard to about 50% of maximum before storage in order to
make your keyboard’s lithium battery last longer.
Safety Instructions
1.
Keep the keyboard away from sharp objects that could damage it.
2.
Do not put heavy objects on the keyboard.
3.
Do not place batteries or devices on or in heating devices, such as microwave ovens, cookers,
or radiators. Batteries may explode when overheated.
4.
Do not stretch, twist or apply force to the keyboard.
5.
The Standby Time of the batteries may vary due to different environmental influences.
6.
To clean the product, gently wipe the product using a moist cotton cloth; the use of other
chemical cleaning is prohibited unless they are specifically designed for this purpose. This
product should be kept away from water droplets splashes, so cups filled with liquids should
not be placed near the product. Do not use alcohol, thinners or petrol to clean the display.
7.
Do not handle a damaged or leaking Lithium Ion (Li-Ion) battery. For safe disposal of your LiIon batteries, contact your nearest authorised recycling centre.
Troubleshooting
If you are unable to connect the Bluetooth keyboard to a computer, or the keyboard is working
in an unconventional fashion. Please follow the steps below:
1.
Before you install your Bluetooth keyboard, make sure that you have gone through the
Bluetooth Dongle installation procedure on your computer, and that the Bluetooth facility
is turned on within the operating system.
2.
Press the Power and Connect button for about 5 seconds until the power light has come on
and then started flashing blue, to indicate that the keyboard is advertising itself via
Bluetooth.
3.
Make sure that the keyboard is within the effective operation distance of 10 meters.
4.
Make sure that there has been no change to the Bluetooth settings. If anything has
changed, try re-pairing the keyboard.
5.
If your Bluetooth is connecting to other Bluetooth products, please check that the speed
of the Bluetooth facility is enough to allow connection to multiple devices at the same
time.
6.
Check that the keyboard is fully charged.
7.
Please make sure that your Bluetooth Dongle is not damaged in any way.
Every time you turn off the keyboard and then turn on it again, or reboot the computer, it seems like
the keyboard isn’t responding.
1.
It can take up to 23 seconds, for the keyboard to connect to a PC because the correct drivers
need to be loaded.
Tips
When your battery is low, the charging light on the keyboard will begin flashing. In order to prevent
interruption to your work, you should connect the keyboard to a charging source in order to keep
working.
If you do not use the keyboard for 15 minutes, it will enter into a dormant state. It will reawaken as
soon as you press any key and after around 3 seconds, your keyboard will be ready to use again.
Support
For support on your product please email [email protected], providing
detailed information about the problem you are experiencing.
We also provide English-language Technical Support to its customers, which can be contacted by calling
+44 (0) 844 997 6556 (calls are charged at 5p per minute). This support line is available from 9:30am to
6:00pm GMT Monday to Friday.
If you experience difficulty during the installation or subsequent use of a product, you should
contact the Technical Support department prior to servicing your device.
Copyright
All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise,
without the prior written permission from the copyright holder. According to copyright law, no recorded
data may be used for purposes other than personal enjoyment without permission from the copyright
holder.
Trademarks
Apple, iPhone and iPad are registered trademarks of Apple, Inc.
Android is a registered trademark of Google, Inc.
Bluetooth® is a registered trademark of the Bluetooth SIG, Inc. worldwide.
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking on the product, accessories or literature indicates
that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other
household waste at the end of their working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote
the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
council office, for details of where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial
wastes for disposal.
This EEE is compliant with RoHS
Correct disposal of batteries
(Applicable in the European Union and other European
countries with separate battery return systems)
This marking on the battery, manual or packaging indicates
that the batteries in this product should not be disposed of
with other household waste at the end of their working life.
Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury,
cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly
disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of
waste and recycle them through your local, free battery return system.
The rechargeable battery built into this product is not user replaceable.
For information on its replacement, please contact support.
Pendo Industries Pty Ltd | PO Box 827, Mount Waverley VIC 3149
1300 275 645 | www.pendo.com.au
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement