Kohler 2952-0 Persuade® Vessel Sink Specification

Features

• Fireclay

• With or without overflow

• Countertop installation or to K-2392 vanity

• 25-1/16 ″ (637 mm) x 18-1/16 ″ (459 mm)

Codes/Standards Applicable

Specified model meets or exceeds the following:

• ADA

• ASME A112.19.2/CSA B45.1

• ICC/ANSI A117.1

STRELA

TM

COUNTERTOP BATHROOM SINK

K-2952

Specified Model

Model

K-2952

K-2952-N

Description

Countertop bathroom sink with overflow (shown)

Countertop bathroom sink without overflow

Colors/Finishes

• 0: White

• Other: Refer to Price Book for additional colors/finishes

Accessories

• CP: Polished Chrome

• Other: Refer to Price Book for additional colors/finishes

Colors/Finishes

❑ 0 ❑ Other_____

❑ 0 ❑ Other_____

Included Accessories

K-4062 Overflow cap for K-2952

Recommended Accessories

K-7107 Decorative grid drain

K-7108

K-7710

K-9018

Decorative grid drain

Metal stopper

P-Trap

❑ CP

❑ CP

❑ CP

❑ CP

❑ CP

❑ Other_____

❑ Other_____

❑ Other_____

❑ Other_____

❑ Other_____

Product Specification

The fireclay bathroom sink shall be 25-1/16 ″ (637 mm) in length and 18-1/16 ″ (459 mm) in width. Bathroom sink shall be for countertop installation or for installation on the K-2392 vanity. Bathroom sink shall be available with or without overflow.

Bathroom sink shall be Kohler Model K-2952-____.

Page 1 of 2

1115038-4B

USA/Canada: 1-800-4KOHLER

(1-800-456-4537) www.kohler.com

STRELA

TM

Technical Information

Fixture*:

Basin area

Water depth

Drain hole

24-1/2 ″ (622 mm) x 17-1/2 ″ (445 mm)

3-11/16

″

(94 mm) without overflow

1-13/16

″

(46 mm) with overflow

Ø 1-3/4

″

(44 mm)

* Approximate measurements for comparison only.

Included component:

Cut-out template

Overflow cap for K-2952

1115039-7

K-4062-CP

Installation Notes

Install this product according to the installation guide.

To install this product on the K-2392 vanity, refer to installation instructions for the vanity.

IMPORTANT!

Product rests on a countertop. Consider height of product when designing installation.

Choose a faucet that will provide adequate clearance and will direct the water stream to the center of the bathroom sink.

When installing a pop-up drain to this bathroom sink, it may be necessary to bend the drain linkage to allow proper reach to the faucet lift rod.

NOTICE: The countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by the Kohler Co. (Call 1-800-4KOHLER.) Kohler

Co. is not responsible for cut-out errors when the incorrect cut-out template is used.

5-7/8"

(149 mm)

14"

(356 mm)

1-3/8"

(35 mm)

24" (610 mm)

25-1/16" (637 mm)

9-1/16"

(230 mm)

1-1/4" OD

11-1/2"

(292 mm)

34"

(864 mm)

27"

(686 mm)

Min

8" (203 mm)

Min

9" (229 mm)

Min

11"

(279 mm)

Recommended ADA Installation

18-1/16" (459 mm)

3-1/2"

(89 mm)

3/8" Hot 3/8" Cold

4" (102 mm)

Product Diagram

STRELA

TM

COUNTERTOP BATHROOM SINK

Page 2 of 2

1115038-4B