Quoizel CKCF2822RK Confetti 100W 4-Light Pendant Installation manual
Advertisement
Advertisement
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Assembly Instruction Sheet #IS-CKCF2822
For Styles CKCF2822OS and CKCF2822RK
Please go to selection.
www.quoizel.com
for product cleaning tips. Go to the Care + Maintenance
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Bulb Recommended: (4) Medium Base 100W Maximum,
Estimated Assembly Time: 20-30 minutes
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result.
L
M
N
O
J
K
H
I
P
Part
A
B
E
F
C
D
G
Package Contents
Description
Crossbar
Mounting Screw
Lock Washer
Hex Nut
Mounting Ball
Ceiling Canopy
6” Rod
12” Rod
12” Rod with Nipple
Shade Assembly
Hex Nut (1/8 IP)
Small Plastic Washer
Big Plastic Washer
Diffuser
Big Flat Washer
Finial
Quantity
1 pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1 pc.
2 pcs.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
B
A
C
D
E
K
L
M
O
G
F
H
I
N
P
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2014 QuoizelInc.
December2014
1of6
J
CKCF2822OS/CKCF2822RK
FINISH: OLD SILVER
RUSTIC BLACK
2.4mm
13Ga
GND
QUOIZEL
R
1”
5.5” Dia.
TOP VIEW
6”
49”
OVERALL HEIGHT
INCLUDES
(2) 6” AND 12” RODS
3
10”
2
12”
22” Dia.
1
(4)100W Medium
Base Bulbs
(Not Supplied)
NO.
PART NUMBER REPLACEMENT
1 G147DI DIFFUSER
2
3
2
3
9012EXOS 12”L ROD
9006EXOS 6”L ROD
9012EXRK 12”L ROD
9006EXRK 6”L ROD
REQ.
1
2
STYLE NUMBER
CKCF2822OS
CKCF2822RK
CKCF2822OS
2
2
2
CKCF2822OS
CKCF2822RK
CKCF2822RK
2of6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-CKCF2822
For Styles CKCF2822OS and CKCF2822RK
STEP 1
-
Assemble Rods
A. Determine the Rods (G/H/I) to be assembled to the Shade
Assembly (J) according to your hanging height.
B. Pass Supply Wires and Ground Wire through the chosen
Rods (G/H/I) and then thread the chosen Rods (G/H/I) and the Shade Assembly (J) together. Hand tighten until snug.
6” Rod
6” Rod
12” Rod with Nipple
12” Rod
Shade
Assembly
Supply Wire and
Ground Wire
Figure 1
STEP 2
-
Assemble Ceiling Canopy to Upper
Rod
A. Pass Supply Wires and Ground Wire through the Ceiling
Canopy (F) and then thread the Ceiling Canopy (F) and the Upper Rod together. Hand tighten until snug.
Figure 2
Ceiling
Canopy
Supply Wire and
Ground Wire
Upper Rod
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2014 QuoizelInc.
December2014
3of6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-CKCF2822
For Styles CKCF2822OS and CKCF2822RK
STEP 3
-
Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on the Ceiling Canopy (F).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex Nut
(D) onto the Mounting Screws (B). Hand tighten until snug.
Mounting Screw
Lock Washer
Crossbar
Hex Nut
Ceiling
Canopy
Figure 3
STEP 4
-
Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Figure 4
Mounting
Hole
STEP 5
-
Attach Lanyard
A. The purpose of the lanyard is to provide the installer a means to support the fixture from the junction box while connecting the electrical wires. This enables the fixture to hang from the junction box and your hands are free to make the wire connections.
B. Turn the Button Stop so it may be inserted into the crossbar slot. Make sure the Button Stop is completely inside the crossbar. Slowly release the fixture to make sure it is supported by the Button Stop. Proceed to the wiring steps. Once you are complete with the wiring there is nothing to do with Lanyard. The Lanyard will push into the junction box when the fixture is placed for final mounting.
Crossbar
Outlet
Box
Crossbar
Outlet Box
Screw
Figure 5
Slot
Button Stop
Lanyard
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2014 QuoizelInc.
December2014
4of6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-CKCF2822
For Styles CKCF2822OS and CKCF2822RK
STEP 6
-
Make Wire Connections
A. Use standard wire connectors to make all wire connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully stuff all the connected wires into the Outlet Box.
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Ground wire from supply
Black wire from fixture
Ground wire from fixture
Figure 6
STEP 7
-
Attach Ceiling Canopy to Mounting
Screw
A. Place the Ceiling Canopy (F) over the Mounting Screws
(B) and secure with Mounting Balls (E). Hand tighten until snug.
Mounting Screw
Figure 7
Figure 8
Ceiling Canopy
Mounting Ball
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2014 QuoizelInc.
December2014
5of6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-CKCF2822
For Styles CKCF2822OS and CKCF2822RK
STEP 8
-
Assemble Diffuser
A. Pass the Small Plastic Washer (L), the Diffuser (N), the
Big Plastic Washer (M) and the Big Flat Washer (M) over the end of the Center Stem as shown. Secure by threading the Hex Nut (1/8 IP) (K) onto the Center
Stem. Hand tighten until snug.
Figure 9
STEP 9
-
Assemble Finial
A. Thread the Finial (P) onto the Center Stem and hand tighten until snug.
Small Plastic
Washer
Big Plastic Washer
Big Flat Washer
Hex Nut (1/8 IP)
Center Stem
Diffuser
STEP 10
-
Install Bulb
A. This fixture uses standard bulb with a standard screw base. Maximum 100 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use. Enjoy!
Figure 10
Socket
Bulb
Center Stem
Finial
Figure 11
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2014 QuoizelInc.
December2014
6of6

Public link updated
The public link to your chat has been updated.
Advertisement