Lancia Delta 2011 Owner's Manual
Lancia Delta is a reliable car that is perfect for any driver. It comes with a variety of features that make it a pleasure to drive, including a comfortable interior, a powerful engine, and a sleek design. Whether you're commuting to work or taking a road trip, the Lancia Delta is sure to make your journey more enjoyable.
Advertisement
Advertisement
Owner Handbook
WHY CHOOSING
GENUINE PARTS
We really know your car because we invented, designed and built it: we really know every single detail. At
Lancia Service authorised workshops
you can find technicians directly trained by us, offering quality and professionalism for all service operations.
Lancia workshops are always close to you for the regular servicing operations, season checks and practical recommendations by our experts.
With Lancia Genuine Parts you keep the reliability, comfort and performance features of your new car unchanged in time: that's why you bought it for.
Always ask for Genuine Parts for the components used on our cars; we recommend them because they come from our steady commitment in research and development of highly innovative technologies.
For all these reasons:
rely on Genuine Parts, because they are the only ones designed by Lancia for your car.
SAFETY:
BRAKING SYSTEM
ENVIRONMENT: PARTICULATE FILTERS,
CLIMATE CONTROL MAINTENANCE
COMFORT: SUSPENSION
AND WINDSCREEN WIPERS
PERFORMANCE: SPARK PLUGS,
INJECTORS AND BATTERIES
LINEACCESSORI
ROOF RACK BARS, WHEEL RIMS
CHOOSING GENUINE PARTS IS
THE MOST NATURAL CHOICE
P E R F O R M A N C E
GENUINE PARTS
C O M F O R T
GENUINE PARTS
S A F E T Y
GENUINE PARTS
A M B I E N T
GENUINE PARTS
A C C E S S O R I E S
GENUINE PARTS
VALUES
GENUINE PARTS
HOW TO RECOGNISE
GENUINE PARTS
To recognise a Genuine Part , check that the component bears our brands , always clearly visible on Genuine Parts, from the braking system to windscreen wipers, from shock absorbers to air cleaner.
All Genuine Parts undergo strict controls , both during design and manufacturing stages, by specialists using vanguard materials , to test the component reliability .
This to guarantee performance and safety for you and your passengers on board, for a long time.
Always ask for and make sure a Genuine Part has been used.
Genuine
Parts
Genuine
Parts
Genuine
Parts
Air cleaner Shock absorber Brake pads
Dear Customer,
We would like to congratulate and thank you for choosing LANCIA.
We have written this handbook to help you get familiar with all the features of your car.
You should read it right through before taking to the road for the first time.
It contains important information, advice and instructions for the use of the car which will help you get the very best out of your LANCIA.
This booklet also provides a description of special features, essential information for the correct care and maintenance of your LANCIA as well as safe driving tips.
Read the warnings and indications, marked with the following symbols: personal safety; car safety; environmental protection.
The enclosed Warranty Booklet lists the services that LANCIA offers to its Customers:
– the Warranty Certificate with terms and conditions for maintaining its validity;
– the range of additional services available to LANCIA Customers.
We are sure that these will help you get in touch with your new car and further appreciate it and the care provided by the people at LANCIA.
Enjoy reading and happy motoring!
This Owner Handbook describes all versions of the LANCIA Delta; please consider only the information relevant to your version, engine and configuration.
READ THIS CAREFULLY!
REFUELLING
K
Petrol engines: exclusively refuel the car with unleaded petrol with a RON no lower than 95.
Diesel engines: refuel only with diesel fuel conforming to the European specification EN590.
The use of other products or mixtures may damage the engine beyond repair and consequently invalidate the warranty due to the damage caused.
STARTING THE ENGINE
Petrol engines: make sure that the handbrake is engaged, place the gear lever in neutral, fully depress the clutch without depressing the accelerator, then turn the ignition key to AVV and release it as soon as the engine has started.
Diesel engines: turn the ignition key to MAR and wait for the warning lights
Y and m to switch off; turn the ignition key
AVV and release it as soon as the engine starts.
PARKING ON FLAMMABLE MATERIAL
The catalytic converter develops high temperatures during operation. Do not park the car on grass, dry leaves, pine needles or other flammable material: fire hazard.
RESPECTING THE ENVIRONMENT
The car is fitted with a system that allows continuous diagnosis of the components correlated with emissions to ensure better respect for the environment.
ELECTRICAL ACCESSORIES
쇵 If, after buying the car, you decide to add electrical accessories (that may gradually drain the battery), visit a Lancia Dealership . They can calculate the overall electrical requirement and check that the car’s electric system can support the required load.
CODE CARD
Keep the card in a safe place, not in the car. We recommend that you always carry the electronic code provided on the CODE card with you, in case you need to perform an emergency start.
SCHEDULED SERVICING
Correct car maintenance is essential to ensure that the performance, safety features, environmental friendliness and low running costs are unchanged over the years.
THE OWNER HANDBOOK CONTAINS…
... important information and warnings on the correct use and maintenance of your car over time as well as safe driving tips. Pay special attention to the symbols
" (personal safety) # (environmental protection)
â (car safety).
Refer to the “Instrument panel warning lights” chapter in this handbook if the message “See Handbook” appears on the display.
SUMMARY
Knowing your car
1
Safety
2
Starting and driving
3
In an emergency
4
Servicing and maintenance
5
Technical specifications
6
List of contents
7
page intentionally left blank
KNOWING YOUR CAR
Instrument panel ........................................
Control panel and instruments ...................
Display ......................................................
23
Menu items ................................................
28
8
9
Trip Computer ...........................................
38
Symbols .....................................................
40
Lancia Code system ...................................
41
Keys ...........................................................
42
Alarm ........................................................
46
Ignition device ...........................................
49
Seats ..........................................................
50
Headrest ....................................................
53
Steering wheel ............................................
54
Rear view mirrors ......................................
54
Climatic comfort ........................................
56
Manual climate control system ...................
57
Automatic dual zone climate control system .
59
External lights ...........................................
65
Window washing ........................................
68
Cruise Control ............................................
71
Roof lights .................................................
73
Controls .....................................................
75
Fuel cut-off system ....................................
78
Interior fittings ...........................................
79
Sunroof ......................................................
84
Doors .........................................................
87
Power windows ..........................................
90
Boot ...........................................................
94
Bonnet .......................................................
100
Roof rack/ski rack .....................................
102
Headlights .................................................
103
DST system ................................................
105
SPORT function .........................................
105
Reactive Suspension System .......................
107
Driving Advisor ..........................................
108
Advanced ESP system ................................
114
Start&Stop system .....................................
121
EOBD system .............................................
126
“Dualdrive” electric power steering system ...
127
TPMS system .............................................
129
Parking sensors ..........................................
133
Magic Parking ............................................
136
Radio wiring system ...................................
150
Electrical/electronic devices installation .....
151
Refuelling the car .......................................
152
Protecting the environment ........................
154
7
1
8 KNOWING YOUR CAR
INSTRUMENT PANEL
The presence and position of the controls, instruments and gauges may vary depending on the version.
L0E0001m fig. 1
1. Diffuser for sending air to the side windows – 2. Adjustable and directable air diffuser – 3. Exterior lights control lever – 4. Instrument panel – 5. Windscreen wiper/rear window wiper/trip computer control lever – 6. Adjustable and directable air diffusers – 7. Hazard warning lights switch – 8. Front passenger air bag – 9. Glove compartment
10. Controls in the dashboard – 11. Climate control system controls – 12. Ignition key and starting device – 13. Driver’s air bag – 14. Driver’s knee bag (for versions/markets, where provided) – 15. Steering wheel locking lever
16. Fuse box access flap – 17. Bonnet release lever.
KNOWING YOUR CAR
CONTROL PANEL AND INSTRUMENTS
fig. 2
Versions with multifunction display
A Speedometer (speed indicator)
B Fuel gauge with reserve warning light
C Engine coolant temperature gauge with overheating warning light
D Rev counter
E Multifunction display m c Warning lights present on diesel versions only.
IMPORTANT The type and background colour of the instruments can vary between different versions.
L0E0002m
9
1
10 KNOWING YOUR CAR fig. 3
Versions with reconfigurable multifunction display
A Speedometer (speed indicator)
B Fuel gauge with reserve warning light
C Engine coolant temperature gauge with overheating warning light
D Rev counter
E Reconfigurable multifunction display.
m c Warning lights present on diesel versions only.
IMPORTANT The type and background colour of the instruments can vary between different versions.
L0E0003m
KNOWING YOUR CAR 11
SPEEDOMETER (SPEED INDICATOR) fig. 2-3
Indicator A shows the speed of the car.
REV COUNTER fig. 2-3
The indicator D shows the engine revs.
FUEL LEVEL GAUGE fig. 2-3
Indicator B shows the amount of fuel in the tank.
The K warning light will switch on (together with a message on the display) to indicate there are between 5 and
7 litres of fuel remaining.
Do not travel with the fuel tank almost empty: the gaps in fuel delivery could damage the catalytic converter.
ENGINE COOLANT TEMPERATURE GAUGE fig. 2-3
Gauge C shows the temperature of the engine coolant and indicates when the coolant temperature exceeds 50 °C.
The first reference remains on constantly to indicate that the system is operating correctly. The u warning light switches on (together with a message on the display) to indicate that the temperature of the engine coolant has increased significantly. In this event, stop the engine and go to a Lancia Dealership.
INSTRUMENT PANEL WARNING LIGHTS
General warnings
The warning lights switch on together with a dedicated message and/or a buzzer where appropriate. These indications are brief and precautionary and as such must not be considered as exhaustive and/or an alternative to the information contained in the Owner Handbook, which you are recommended to read carefully in all cases.
Always refer to the information in this chapter in the event of a failure indication.
Low brake fluid level (red) x
Turning the key to the MAR position the warning light switches on, but it will switch off after a few seconds. The warning light comes on when the level of the brake fluid in the reservoir falls below the minimum level due to a possible leak in the circuit.
The display shows the dedicated message.
Handbrake on (red)
When the key is turned to the MAR position the warning light comes on but should go out after a few seconds.
The warning light turns on when the handbrake is engaged. If the car is moving the buzzer will also sound.
IMPORTANT If the warning light turns on when travelling, make sure that the handbrake is not engaged.
1
12 KNOWING YOUR CAR
EBD failure (red) x
If warning lights x and
> are on at the same time with the engine running, this indicates an EBD system failure or that the system is not available. Early locking of the rear wheels > may occur in the event of sharp braking, possibly causing the car to swerve.
Drive very carefully to a Lancia Dealership to have the system inspected immediately. The display will show a dedicated message.
Airbag failure (red)
¬
When the key is turned to the MAR position the warning light comes on but should go out after a few seconds. The warning light stays on constantly if there is a failure in the air bag system.
The display will show a dedicated message.
If the x warning lightturns on when travelling (with the message on the display) stop the car immediately and contact a Lancia
Dealership.
If the ¬ warning light does not come on when the key is turned to MAR or if it stays on with the car in motion (together with the message on the display) there could be a fault in the restraint systems; under these circumstances, the air bags or pretensioners may not be deployed in the event of an impact or, more rarely, they could be deployed accidentally. Before continuing your journey, contact a Lancia Dealership to have the system checked immediately.
Brake pad wear (amber) d
The warning light (or symbol on the display) switches on when the front brake pads show signs of wear; under these circumstances have them replaced as soon as possible. The display shows the dedicated message.
IMPORTANT Because the car is equipped with a wear detection system only for the front brake pads, when these are replaced the rear brake pads should also be checked for wear.
The failure of warning light ¬ is indicated by warning light
“ flashing for longer than the usual four seconds, thus signalling that the front passenger airbag is deactivated. In addition, the air bag system automatically disables the air bags on the passenger side (both front and side air bags). In this case, the warning light ¬ may not indicate failures in the retaining system.
Contact a Lancia Dealership immediately to have the system checked.
KNOWING YOUR CAR
“ Passenger-side air bag/side bags deactivated (amber)
The
“ warning light switches on when the front passenger’s airbag and side bag are disabled. With the front passenger airbags enabled, when the ignition key is turned to MAR the
“ warning light comes on steadily for about four seconds, flashes for another four seconds and then should go out.
Low battery charge (red) w
The warning light switches on when the ignition key is turned to MAR, but it should switch off as soon as the engine has started (with the engine running at idle speed a brief delay before going out is acceptable).
If the warning light stays on, constantly or flashing, contact a Lancia Dealership immediately.
Failure of the warning light
“ is indicated by warning light ¬ coming on. In addition, the airbag system automatically disables the airbags on the passenger’s side (both front and side airbags for versions/markets where provided).
Contact a Lancia Dealership immediately to have the system checked.
< Seat belts unfastened (red)
This warning light comes on constantly when the car is not moving and the driver’s seat belt is not correctly fastened. The warning light will flash and a buzzer will sound if the vehicle is in motion and the front seat belts are not correctly fastened.
The S.B.R. (Seat Belt Reminder) system buzzer can only be permanently switched off by a Lancia Dealership.
The system can be reactivated using the Set-up Menu.
v
Continuously on: low engine oil pressure
(red)
Flashing: exhausted engine oil
(only Multijet versions with DPF – red)
When the key is turned to MAR the warning light comes on, but should go out as soon as the engine is started.
1. Low engine oil pressure
The warning light will turn on constantly together with the message on the display (for versions/markets where provided) when the system detects that the engine oil pressure is too low.
If the warning light v switches on when the car is travelling (on certain versions together with the message on the display) stop the engine immediately and contact a Lancia
Dealership.
13
1
14 KNOWING YOUR CAR
2. Degraded engine oil
(only Multijet versions with DPF)
The warning light will turn on flashing together with the message on the display (for versions/markets where provided). Depending on the versions, the warning light flashing modes are as follows:
– one minute every two hours;
– for three minute cycles with the warning light off for intervals of five seconds until oil is changed.
After the first indication, at each engine start up the warning light will continue flashing as above described until the oil is changed. For those versions/markets where provided, the display shows a dedicated message together with the warning light.
The flashing of the warning light should not be considered as fault, it simply informs the customer that the oil needs to be changed following normal car use.
Remember that the deterioration of the engine oil is accelerated by:
– mainly town use of the car which makes the DPF regeneration process more frequent
– use of the car for short journeys, preventing the engine from reaching operating temperature
– repeated interruption of the regeneration process, signalled by the DPF warning light coming on.
Degraded engine oil should be replaced as soon as possible after the warning light comes on, and never more than 500 km after it first comes on. Failure to observe the above may result in severe damage to the engine and invalidate the warranty. Please note also that the switching on of this warning light does not depend on the oil quantity in the engine; when the warning light flashes, never add oil.
g “Dualdrive” electric power steering failure (red)
This warning light switches on when the ignition key is turned to MAR, but it should switch off after a few seconds.
If the warning light (or symbol on the display) remains on, you will not have steering assistance and the effort required to operate the steering wheel will be increased; steering is, however, possible. In this case, go to a Lancia
Dealership. The display will show a dedicated message.
“Dualdrive” electric steering engagement
CITY
The warning light switches on (or the word
“CITY” appears on the display) when the
“Dual drive” electric power steering system is activated by pressing the relevant control button. Press the button again to turn the “CITY” wording off.
KNOWING YOUR CAR 15
U
Start&Stop SYSTEM
ACTIVATION/DEACTIVATION
(for versions/markets, where provided)
Start&Stop SYSTEM FAULT
Start&Stop system activation
A message and a symbol U will appear on the display when the Start&Stop system is activated. In this condition, the LED on the button T is off.
Turning the Start&Stop off
–Versions with reconfigurable multifunction display: the
T symbol will appear on the display when the Start&Stop system is off.
The LED on the T button will be on when the system is off.
Engine coolant overheating (red) u
Turning the key to the MAR position the warning light switches on, but it will switch off after a few seconds. The warning light turns on when the engine is overheated. If the warning light comes on when driving, proceed as follows:
❍ normal driving conditions: stop the car, switch off the engine and check that the water level in the reservoir is not below the MIN mark.
In this case, wait for a few minutes for the engine to cool down, then slowly and carefully open the cap, top-up with coolant and check that the level is between the MIN and
MAX reference on the reservoir itself. Also check for any fluid leaks. Go to a Lancia Dealership if the warning light should switch on when the engine is started again.
j Start&Stop SYSTEM FAILURE
(versions with reconfigurable multifunction display)
A message and the symbol j will appear on the display when the Start&Stop system is faulty. In this case, go to a Lancia Dealership.
1
16 KNOWING YOUR CAR
❍ if the vehicle is used under demanding conditions (e.g.
towing trailers uphill or fully loaded): slow down and, if the light stays on, stop the car. Wait for 2 or 3 minutes with the engine running and slightly accelerated to further accelerate the coolant circulation. Then stop the engine. Check the correct liquid level as described above.
IMPORTANT Over demanding routes, it is advisable to keep the engine on and slightly accelerated for a few minutes before switching it off.
The display will show a dedicated message.
Doors not closed correctly (red)
´
This warning light switches on when one or more doors are not properly shut. An acoustic signal is activated with the doors open and the car moving. The warning light in the multifunction display also switches on when the bonnet and/or tailgate are not properly shut. The display will show a dedicated message.
è
General failure indication (amber)
Fuel cut-off activated
This warning light (or symbol on the display) switches on when the fuel cut off system intervenes. The display shows the dedicated message.
Engine oil pressure sensor failure
This warning light (or symbol on the display) switches on when a failure is detected in the engine oil pressure sensor. The display shows the dedicated message.
Dusk sensor failure
This warning light (or symbol on the display) switches on when a failure is detected in the dusk sensor.
Speed limit exceeded
This warning light (amber), or symbol on the display
(red), switches on when the preset speed limit is exceeded
(for Arab countries the speed limit is set at 120 km/h).
The display shows the dedicated message.
Rain sensor fault
(for versions/markets, where provided)
This warning light (or symbol on the display) switches on when a fault is detected in the rain sensor. The display shows the dedicated message.
Start&Stop fault
(for versions/markets, where provided)
(versions with multifunction display)
The warning light comes on when a failure is detected in the Start&Stop system. The display will show a dedicated message.
KNOWING YOUR CAR 17
Parking sensor fault
( for versions/markets, where provided)
This warning light (or symbol on the display) switches on when a fault is detected in the parking sensors. The display shows the dedicated message.
Tyre pressure monitoring system (TPMS) failure
(for versions/markets, where provided)
This warning light (or symbol on the display) switches on when a failure is detected in the T.P.M.S. system (where provided). Should one or more wheels without a sensor be fitted, the instrument panel warning light will come on and stay on until the initial conditions are restored.
The display shows the dedicated message.
NOTE If one of the above mentioned faults occurs, contact a Lancia Dealership as soon as possible.
AFS system failure
This warning light (or symbol on the display) switches on when a failure is detected in the AFS system (see “Headlights” paragraph in this chapter). The display shows the dedicated message.
Steering corrector not available
This warning light (or symbol on the display) switches on when the steering corrector is not available. The display will show a dedicated message.
h
DPF (diesel particulate filter) cleaning in progress (only Multijet versions with DPF) (amber)
When the key is turned to the MAR–ON position the warning light comes on but should go out after a few seconds. The warning light turns on constantly when the
DPF system needs to eliminate the trapped pollutants through the regeneration process.
The warning light does not come on every time the DPF is being regenerated, rather only when the driving conditions are such that the driver needs to know it. To switch the warning light off, the car must be kept moving until the regeneration process is completed.
As an average, the process lasts fifteen minutes. The best conditions to complete the regeneration process are reached driving the car at about 60 km/h with engine speed over 2000 rpm. When this warning light switches on, it does not indicate a car failure and thus it should not be taken to a workshop. For versions/markets where provided, the display shows the dedicated message and the warning light comes on.
1
18 KNOWING YOUR CAR
Always drive at a speed appropriate to the traffic conditions, the weather and speed limits. The engine can also be switched off if the
DPF warning light is on; nevertheless, repeated interruptions of the regeneration process could cause an early decay of engine oil. For this reason, always wait until the warning light switches off before stopping the engine as described above. It is not a good idea to complete DPF regeneration with the vehicle stationary.
Fuel reserve (amber)
K
When the key is turned to the MAR position the warning light comes on but should go out after a few seconds. The warning light switches on when about 5 to 7 litres of fuel are left in the tank.
The display shows the dedicated message.
IMPORTANT The warning light will blink to indicate a system failure. Go to a Lancia Dealership to have the system checked.
EOBD/injection system failure (amber)
U
Under normal conditions, when the ignition key is turned to MAR, the warning light switches on, but should switch off as soon as the engine is started.
If the warning light remains on or switches on whilst driving, that means that the injection system is not working properly; in particular, if the warning light switches on constantly, this indicates a malfunction in the supply/ ignition system that could cause excessive exhaust emissions, a possible loss of performance, poor driveability and high fuel consumption. On some versions the display shows the dedicated message. Under these conditions, you may continue travelling at moderate speed without demanding excessive effort from the engine. Prolonged use of the car with the warning light on may cause damage. Go to a Lancia Dealership as soon as possible.
The warning light goes off if the failure disappears, but it is still stored by the system.
Petrol engines only
If the warning light is flashing, this indicates that the catalytic converter may be damaged.
If the warning light flashes, it is necessary to release the accelerator pedal to lower the speed of the engine until the warning light stops flashing; continue the journey at moderate speed, trying to avoid driving conditions that may cause further flashing and contact a Lancia Dealership as soon as possible.
If, turning the ignition key to MAR, the warning light
U does not turn on or if it turns on steadily or flashing when travelling (on certain versions together with the message on the display), contact a Lancia Dealership as soon as possible. The operation of the warning light
U may be checked by the traffic control authorities using specific devices. Always comply with the traffic regulations in force in the country where you are driving.
KNOWING YOUR CAR 19
Advanced ESP system (amber)
á
When the key is turned to the MAR position the warning light comes on but should go out after a few seconds. If the warning light does not switch off or stays on together with the LED on the ASR button when travelling, contact a Lancia Dealership. On some versions the display shows the dedicated message.
If the warning light flashes when driving, this indicates that the Advanced ESP system is activated.
If the battery is disconnected, the warning light
á will switch on (together with a message in the display) to indicate that the system must be realigned.
To switch the warning light off, carry out the following initialisation procedure:
❍ turn the ignition key to MAR:
❍ turn the steering wheel fully both clockwise and anticlockwise (to move from the position with the wheels straight);
❍ turn the ignition key to STOP and then to MAR.
If the warning light á does not go out after a few seconds, seek assistance from a Lancia Dealership.
á
*
Hill Holder failure (amber)
The
á warning light switches on to indicate a Hill holder system failure. In this case, go to a Lancia Dealership as soon as possible. Alternatively, on some versions the
* symbol switches on in the display.
The display will show a dedicated message.
Glow plugs m
This warning light switches on when the key is turned to MAR. It will switch off as soon as the heater plugs have reached a preset temperature. Start the engine as soon as the warning light switches off.
IMPORTANT In hot outside temperatures, the warning light may stay on for only a very short time.
Glow plug warming failure
The warning light flashes if there is a fault in the preheating system. Go to a Lancia Dealership as soon as possible.
The display will show a dedicated message.
1
20 KNOWING YOUR CAR c
Water in the diesel filter
(Multijet versions) (amber)
When the key is turned to the MAR position the warning light comes on but should go out after a few seconds. The warning light turns on when there is water in the diesel filter. The display will show a dedicated message.
The presence of water in the supply circuit may cause severe damage to the injection system and irregular engine operation. If warning light c lights up (on some versions with the message on the display), go to a Lancia Dealership as soon as possible to have the system bled.
Water may have entered the tank if this appears immediately after refuelling: if this happens, switch the engine off immediately and contact a Lancia
Dealership.
ABS system failure (amber)
>
When the key is turned to the MAR–ON position the warning light comes on but should go out after a few seconds. The warning light will light up when the system is either not working or not available. Under these circumstances the braking system will work as normal without the extra performance offered by the ABS system.
Drive carefully and go to a Lancia Dealership as soon as possible.The display will show a dedicated message.
Drive carefully and go to a Lancia Dealership as soon a
Lancia Code system failure (amber) Y
This warning light (or symbol on the display), when on constantly with the ignition key turned to MAR, indicates a possible failure (see
“Lancia Code system”).
If the
Y warning light (or symbol in the display) is flashing, this means that the vehicle is not protected by the engine immobilizer device (see “Lancia Code system”).
Contact a Lancia Dealership to have all the keys programmed.
Alarm failure
(for versions/markets, where provided)
A failure in the alarm system is signalled by this warning light (or symbol in the display) switching on. Contact a Lancia Dealership as soon as possible.
The display shows the dedicated message.
Break in attempt
(for versions/markets, where provided)
This warning light (or symbol in the display) switches on when a break in attempt is detected. Contact a Lancia
Dealership as soon as possible.
The display will show a dedicated message.
KNOWING YOUR CAR 21 n
Insufficient tyre pressure
(for versions/markets where provided)
This warning light switches on when the ignition key is turned to MAR, but it should switch off after a few seconds. The warning light (amber), or symbol in the display (red), switch on when the inflation pressure of one or more tyres falls below a preset level.
In this way the T.P.M.S. warns the driver and signals the possibility of the tyre being dangerously deflated and a probable puncture (see paragraph “T.P.M.S.” in this chapter).
IMPORTANT Do not continue driving with one or more flat tyres as handling may be compromised. Stop the car, avoiding harsh braking or steering manoeuvres. Replace the wheel immediately with the space-saver wheel (for versions/markets where provided) or carry out a repair using the dedicated kit (see “Changing a wheel” in the chapter “4”) and contact a Lancia Dealership as soon as possible.
Check tyre pressures
This warning light (for versions/markets where provided) switches on when the ignition key is turned to MAR, but it should switch off after a few seconds.
The warning light (or symbol in the display) switches on to show the flat tyre (see “T.P.M.S.” paragraph in this chapter).
Should two or more tyres be flat, the display will show the indications corresponding to each tyre in sequence.
Restore the correct inflation pressure values as soon as possible (see paragraph “Cold tyre pressures” in chapter “6”).
Tyre pressure unsuitable for speed
This warning light (for versions/markets where provided) switches on when the ignition key is turned to MAR, but it should switch off after a few seconds.
Should it be necessary to travel at a speed higher than
160 km/h, inflate the tyres more than the pressure value specified in paragraph “Cold tyre pressures” in chapter
“6”.
If the T.P.M.S. system (for versions/markets where provided) detects that the pressure of one or more tyres is unsuitable for the current speed, the warning light or symbol will switch on (together with the message on the display) (see “Tyre pressure low” in this chapter) and it will stay on until the car slows down to a speed below the preset threshold (see “T.P.M.S.” paragraph in this chapter).
IMPORTANT In this case, slow down immediately because tyre overheating could damage tyre performance and durability beyond repair, and may even make the tyre explode.
1
22 KNOWING YOUR CAR
Particularly strong radio frequency interference may cause the T.P.M.S. system to function incorrectly. This condition is indicated to the driver by a message (for versions/markets where provided).
The message will disappear automatically as soon as the interference ceases to disturb the system.
W Exterior lights failure (amber)
This warning light (or symbol on the display) switches on when a failure is detected in any of the following lights:
❍ side lights;
❍ brake lights (for versions/markets where provided);
❍ rear fog lamps;
❍ direction indicators;
❍ number plate lights;
❍ day lights.
The failure relating to these lights could be: one or more blown bulbs, a blown protection fuse or a break in the electrical connection.
The display shows the dedicated message.
4
Rear fog lamps (amber)
The warning light switches on activating the rear fog lamps.
5
Front fog lights (green)
The warning light comes on when the front fog lights are turned on.
F
D
Direction indicators
(green – intermittent)
The warning lights switch on when the direction indicator control lever is moved downwards, upwards or when the hazard warning light button is pressed.
3
Day lights/dipped beam headlights
(green)
This warning light switches on when the day lights or dipped beam headlights are activated.
Follow me home
This warning light comes on when this device is activated
(see “Follow me home”).
The display will show a dedicated message.
KNOWING YOUR CAR 23
1
Main beam headlights (blue)
The warning light switches on when the main beams are turned on.
Ü
Cruise Control (green)
(for versions/markets where provided)
When the key is turned to the MAR position the warning light comes on but should go out after a few seconds. The warning light is lit up on the display by rotating the Cruise Control ring nut to ON.
The display will show a dedicated message.
DISPLAY
The car may be provided with a multifunction/recon figurable multifunction display that shows useful information, according to the previous settings, when driving.
MULTIFUNCTION DISPLAY “STANDARD” SCREEN
Versions without Start&Stop fig. 4
The standard screen shows the following information:
A. Date
B. Dualdrive electric power steering indication
C. Sport driving mode indication (for versions/markets where provided)
D. Time
E. Odometer (display of distance travelled in kilometres/ miles)
F. Possible ice on the road indication
G. Outside temperature
H. Scheduled maintenance interval
I. Headlight alignment position (only with dipped beam headlights on).
1
L0E1000g fig. 4
24 KNOWING YOUR CAR
Versions with Start&Stop fig. 4a
(for versions/markets, where provided)
The standard screen shows the following information:
A Date
B Gear Shift Indicator (for versions/markets where provided)
C Start&Stop function indication
D Time
E Odometer (display of distance travelled in kilometres/ miles)
F Outside temperature
G Headlamp alignment position (only with dipped headlamps on)
H Dualdrive electric power steering indication fig. 4a
L0E1032g
KNOWING YOUR CAR 25
RECONFIGURABLE MULTIFUNCTION
“STANDARD” DISPLAY fig. 5
The standard screen shows the following information:
A. Time
B. Date
C. Sport driving mode indication (for versions/markets where provided)
D. Odometer (display of distance travelled in kilometres/ miles)
E. Car status indications (e.g. doors open, possible ice on road, etc.)/Start&Stop function indicator (for versions/ markets where provided)/Gear Shift Indicator (for versions/markets where provided)
F. Headlamp alignment position (only with dipped headlamps on)
G. Outside temperature
On some versions, when the “Engine info” menu item is selected, the display shows the turbine pressure when the ignition is turned to the MAR position, fig. 6.
1 fig. 5
L0E1033g fig. 6
L0E0004m
26 KNOWING YOUR CAR
GEAR SHIFT INDICATOR
The “GSI” system (Gear Shift Indicator) advises the driver to change gear via an indication on the instrument panel (see fig. 6a).
Shifting when indicated by GSI will help the driver save fuel.
When the SHIFT UP icon ( N SHIFT) is shown on the display, the GSI is advising the driver to select a higher gear, while the SHIFT DOWN ( O SHIFT) icon suggests that a lower gear should be engaged.
NOTE The indication on the instrument panel remains on until the driver changes gear or until the driving conditions return to a situation where a gear change is not required to reduce consumption.
CONTROL BUTTONS fig. 7
Õ : To scroll upwards through the displayed menu and the related options or to increase the displayed value.
SET : press to access the menu and/or go to the next screen or confirm your choice. Hold down to go back to the standard screen.
Ô : to scroll downwards through the displayed menu and the related options or to decrease the displayed value.
fig. 6a
L0E1025gm fig. 7
L0E0005m
KNOWING YOUR CAR 27
IMPORTANT Buttons Õ and Ô activate different functions according to the following situations:
– within the menu, they allow you to scroll up and down through the options;
– during setting operations they increase or decrease the value.
IMPORTANT When one of the front doors is opened, the display will switch on and show the clock and km or miles covered for a few seconds.
SETUP MENU
The menu comprises a series of items which can be selected using the Õ and Ô buttons to access the different selection and setting operations (set up) described in the following paragraphs. Some items also have a sub-menu. The Set up
Menu is activated by briefly pressing the SET button.
The menu includes the following items:
– MENU
– LIGHTING
– SPEED BEEP
– LIGHT SENSOR (for versions/markets where provided)
– CORNER LIGHTS
(for versions/markets where provided)
– TRIP B ACTIVATION/DATA
– SET TIME
– SET DATE
– FIRST PAGE (for versions/markets where provided)
– SEE RADIO
– AUTOCLOSE
– UNIT OF MEASUREMENT
– LANGUAGE
– WARNING VOLUME
– BUTTON VOLUME
– SEAT BELT BEEP/BUZZ.
– SERVICE
– AIR BAG/PASSENGER BAG
– DAYTIME RUNNING LIGHTS
– EXIT MENU
1
28 KNOWING YOUR CAR
Selection of an option from main menu without submenu:
– briefly press the SET button to select the main menu option to be set;
– press Õ or Ô (with single presses) to select the new setting;
– briefly press the SET button to store the new setting and to go back to the main menu option selected previously.
Selecting an option from the main menu with a submenu:
– briefly press the SET button to display the first submenu option;
– press Õ or Ô (with single presses) to scroll through all the submenu options;
– briefly press the SET button to select the displayed submenu option and to open the relevant set-up menu;
– press Õ or Ô to select the new setting for this submenu option;
– a short press on the button SET will store the setting and, at the same time, return to the same submenu option that was first selected.
MENU ITEMS
Lighting (Adjusting lighting inside the car)
This function is used to set the brightness of the instrument panel, sound system controls and automatic climate control system controls (for versions/markets where provided) to 8 levels.
Proceed as follows to adjust the brightness:
– press the SET button briefly to make the display flash the previously set level; press button Õ or Ô to adjust the brightness level;
– briefly press SET to go back to the menu screen or hold the button down to go back to the standard screen without saving.
Speed Beep (Speed limit)
This function allows the car speed limit to be set (km/h or mph) and the driver will be notified when it is exceeded (see “Warning lights in panel section” in chapter
1). To set the desired speed limit, proceed as follows:
– press the SET button briefly, the display will show the dedicated message;
– press the Õ or Ô button or to select speed limit On or
Off;
– when the function is activated (On), press the Õ or Ô button to select the desired speed limit and press SET to confirm the choice.
KNOWING YOUR CAR 29
IMPORTANT Setting is possible between 30 and
200 km/h, or 20 and 125 mph, according to the previously set unit. See the “Unit of measurement” paragraph described below. The setting will increase/decrease by five units each time Õ / Ô is pressed. Hold down button
Õ / Ô to increase/decrease the setting rapidly. Complete the setting by briefly pressing the button when you approach the required value.
– briefly press SET to go back to the menu screen or hold the button down to go back to the standard screen without saving.
To cancel the setting, proceed as follows:
– press the SET button briefly to make the display flash
(On);
– press the Ô button to make the display flash (Off); – press the SET button briefly to return to the menu screen or press the button for longer to return to the standard screen without memorising.
Headlight sensor (automatic/dusk sensor headlights sensitivity adjustment)
(for versions/markets where provided)
This function is used to adjust the dusk sensor sensitivity to three levels (level 1 = minimum, level 2 = medium, level 3 = maximum); the higher the sensitivity, the lower the amount of external light needed to switch the headlights on.
Proceed as follows to set:
– press the SET button briefly to make the display flash the previously set level;
– press Õ or Ô to make your choice;
– briefly press SET to go back to the menu screen or hold the button down to go back to the standard screen without saving.
1
30 KNOWING YOUR CAR
Cornering lights (activation/deactivation of cornering lights – fog lights with cornering function) (for versions/markets where provided)
This function activates/deactivates the cornering lights.
To activate/deactivate (ON/OFF) the lights, proceed as follows:
– press the SET button briefly, the display will show On or Off flashing depending on the previous setting; press Õ or Ô to make your choice;
– briefly press SET to go back to the menu screen or hold the button down to go back to the standard screen without saving.
Trip B data/activation (Trip B enablement)
This function can be used to activate (On) or deactivate
(Off) the Trip B display (partial trip).
For further information see “Trip computer”.
Proceed as follows to switch the function on and off:
– press the SET button briefly to make the display flash
On or Off according to what was previously set;
– press Õ or Ô to make your choice;
– briefly press SET to go back to the menu screen or hold the button down to go back to the standard screen without saving.
Time adjustment (Clock adjustment)
This function enables the clock to be set through two submenus: “Time” and “Format”.
To carry out the adjustment, proceed as follows:
– briefly press the SET button and two submenus (Time and Format) are displayed;
– press the Õ or Ô button to move between the two submenus;
– once you have selected a sub-menu, press SET briefly;
– when you select “Time”, pressing SET ESC makes the hours flash on the display;
– press Õ or Ô to adjust the value;
– briefly press the SET button, which makes the display flash the minutes;
– press Õ or Ô to adjust the value.
KNOWING YOUR CAR 31
IMPORTANT The setting increases or decreases by one unit each time button Õ or Ô is pressed. Hold the button pressed to increase/decrease the setting rapidly and automatically. Complete the setting by briefly pressing the button when you approach the required value.
– when you select “Mode”, pressing SET briefly makes the display mode flash on the display;
– press button Õ or Ô to select “24h” or “12h”.
When you have made the required settings, briefly press the SET button to go back to the submenu screen or hold the button down to go back to the main menu screen without storing the new settings.
– hold down the SET button again to return to the standard screen or to the main menu according to where you are in the menu.
Set date (Setting the date)
Using this function you can update the date (day – month
– year).
Proceed as follows to update:
– briefly press SET: the year starts flashing on the display;
– press Õ or Ô to adjust the value;
– briefly press SET: “month” will flash on the display;
– press Õ or Ô to adjust the value;
– briefly press SET: “day” will flash on the display;
– press Õ or Ô to adjust the value.
IMPORTANT The setting increases or decreases by one unit each time button Õ or Ô is pressed. Hold the button pressed to increase/decrease the setting rapidly and automatically. Complete the setting by briefly pressing the button when you approach the required value.
– briefly press SET to go back to the menu screen or hold the button down to go back to the standard screen without saving.
1
32 KNOWING YOUR CAR
Initial page
(display of information on the main screen)
(for versions/markets where provided)
This function allows you to choose the information you would like to see on the main screen. You can choose to display the date or the turbocharger boost pressure.
To make your choice, proceed as follows:
– briefly press SET: “Initial page” will appear on the display;
– press the SET button again briefly to display the date and engine info options;
– press Õ or Ô to select the information you wish to see on the main page of the display;
– briefly press SET to go back to the menu screen or hold the button down to go back to the standard screen without saving.
When the key is turned to MAR–ON and the initial check stage is over, the display will show the information selected via the “First page” menu function.
See radio (audio information display)
With this function the display shows information about the sound system.
– Radio: selected radio station frequency or RDS message, automatic tuning activation or AutoSTore;
– audio CD, MP3 CD: track number;
– CD Changer: CD number and track number;
To show the sound system information on the display
(On) or clear it (Off), proceed as follows:
– briefly press the SET button: the display flashes On or Off depending on the previous setting;
– press Õ or Ô to make your choice;
– briefly press SET to go back to the menu screen or hold the button down to go back to the standard screen without saving.
Autoclose
(Automatic door lock operation with car running)
When activated (On), this function locks the doors automatically when the vehicle speed exceeds 20 km/h.
Proceed as follows to activate or deactivate this function:
– press the SET button briefly to display a submenu;
– press the SET button briefly to make the display flash
On or Off according to what was previously set;
– press Õ or Ô to make your choice;
KNOWING YOUR CAR 33
– press the SET button briefly to return to the submenu screen or hold the button down to return to the main menu screen without saving;
– press the SET button again for a time to return to the standard screen or to the main menu according to where you are in the menu.
Unit of measurement
(Setting the unit of measurement)
With this function is possible to set the unit of measurement in three submenus: “Distance”, “Consumption” and “Temperature”. To set the required unit proceed as follows:
– briefly press SET to display the three sub-menus;
– press the Õ or Ô button to move between the three submenus;
– once the submenu to be modified has been selected, briefly press the SET button;
– if the submenu “Distances” is entered: by briefly pressing SET the display shows “km” or “mi” depending on the previous setting;
– press Õ or Ô to make your choice;
– when you select “Consumption”, pressing SET makes km/l, l/100km or mpg appear on the display depending on the previous setting;
If the distance unit is set to km, you can set the fuel consumption unit to km/l or l/100 km.
If the distance unit is set to mi, fuel consumption is displayed in mpg.
– press Õ or Ô to make your choice;
– when you select “Temperature”, pressing SET makes
°C or °F appear on the display depending on the previous setting;
– press Õ or Ô to make your choice;
When you have made the required settings, briefly press the SET button to go back to the submenu screen or hold the button down to go back to the main menu screen without storing the new settings.
– hold down the SET button again to return to the standard screen or to the main menu according to where you are in the menu.
1
34 KNOWING YOUR CAR
Language (Language selection)
Display messages can be shown in different languages:
Italian, German, English, Spanish, French, Portuguese and Dutch.
To set the desired language, proceed as follows:
– briefly press the button SET: the previously set language starts flashing on the display;
– press Õ or Ô to make your choice;
– briefly press SET to go back to the menu screen or hold the button down to go back to the standard screen without saving.
Warnings volume (Adjusting the alert/warning acoustic signal volume)
With this function the volume of the buzzer which accompanies the display of any failure/warning can be adjusted according to 8 levels.
To set the desired volume, proceed as follows:
– press the SET button briefly, making the display flash the previously set volume level;
– press Õ or Ô to adjust the value;
– briefly press SET to go back to the menu screen or hold the button down to go back to the standard screen without saving.
Button volume (Adjusting the button volume)
This function enables you to adjust the volume of the acoustic signal (8 settings) accompanying the activation of buttons SET, Õ and Ô .
To set the desired volume, proceed as follows:
– press the SET button briefly, making the display flash the previously set volume level;
– press Õ or Ô to adjust the value;
– briefly press SET to go back to the menu screen or hold the button down to go back to the standard screen without saving.
Belt reminder
(Buzzer/reactivation for S.B.R. indication)
This function is only displayed after a Lancia Dealership has deactivated the S.B.R. system (see “S.B.R. system” paragraph, chapter “2”).
KNOWING YOUR CAR 35
Service (Scheduled servicing)
Using this function you can display information about the mileage intervals for car servicing.
To consult this display, proceed as follows:
– briefly press the SET button, which makes the display show the service interval in km or mi according to the previous setting (see “Distance units of measurement” paragraph);
– briefly press SET to go back to the menu screen or hold the button down to go back to the standard screen.
IMPORTANT The “Scheduled Servicing Plan” ensures car servicing every 35,000 km (or the equivalent in miles). This is automatically displayed when the ignition key is in the MAR position, from 2,000 km (or the equivalent in miles) before the service and reappears every
200 km (or the equivalent in miles). Below 200 km servicing indications are more frequent. The display will be in kilometres or miles depending on the measurement unit settings. When the next scheduled service is approaching and the key is turned to MAR, the word Service will appear on the display, followed by the number of kilometres or miles left. Go to a Lancia Dealership, where the “Scheduled Servicing Plan” operations will be performed and the message will be reset.
Air Bag/Passenger Bag
This function is used to activate/deactivate the front passenger’s airbag.
Proceed as follows:
– press SET and, after the message Bag pass: Off (to deactivate) or Bag pass: On (to activate) is displayed by pressing buttons Õ and Ô , press SET again;
– the confirmation request message appears in the display;
– press Õ or Ô to select Yes (to confirm activation/ deactivation) or No (to cancel);
– press the SET button briefly, a message confirming the selection will be displayed and you will return to the menu screen or, pressing the button for longer, you will return to the standard screen without memorising.
1
36 KNOWING YOUR CAR
Daytime lights (D.R.L. – Daytime Running Lights)
With this function is possible to turn the day lights on and off.
Proceed as follows to activate or deactivate this function:
– press the SET button briefly to display a submenu;
– press the SET button briefly to make the display flash
On or Off according to what was previously set;
– press Õ or Ô to change the setting;
– press the SET button briefly to return to the submenu screen or hold the button down to return to the main menu screen without saving;
– press the SET button again for a time to return to the standard screen or to the main menu according to where you are in the menu.
Exit Menu
This is the last function that closes the cycle of settings listed in the menu screen. Pressing the SET button briefly will return the display to the standard screen without storing. Press Ô to return to the first menu option (Speed
Beep).
DISPLAY READINGS
IMPORTANT Failure indications displayed are divided into two categories: very serious and less serious failures.
Very serious failures prompt a prolonged cycle of signals.
Less serious failures prompt a shorter cycle of signals.
The displaying cycle of both failure categories can be stopped by pressing the button SET. The warning light
(or symbol) will stay on until the fault is eliminated.
R
Luggage compartment not properly shut
(red)
This symbol (for versions/markets where provided) switches on in the display when the luggage compartment is not properly shut. The display shows the dedicated message.
Bonnet not properly shut (red)
S
This symbol (for versions/markets where provided) switches on in the display when the bonnet is not properly shut. The display will show a dedicated message.
KNOWING YOUR CAR
Exterior lights failure (amber) W
The symbol switches on in the display when a fault is detected in the brake lights.
The display shows the dedicated message.
f Adaptive lights not available
The display shows the dedicated message when the adaptive lights system is not available.
Contact a Lancia Dealership.
❄ Possible presence of ice on the road
The outside temperature indicator starts flashing when the outside temperature reaches or falls below 3 °C and the
❄ symbol lights up on the display to warn the driver of the possible presence of ice on the road.
The display will show a dedicated message.
è
Steering corrector not available
(DST – Dynamic Steering Torque)
The display shows a dedicated message when the steering corrector is faulty. Contact a Lancia
Dealership.
e Driving advisor on
The display shows a dedicated message when the driving advisor function is switched on.
õ
Service deadline
The display shows a specific message to indicate the scheduled servicing deadline.
Speed limit exceeded
The display shows a dedicated message when the preset speed limit is exceeded (for Arab countries the speed limit is set at 120 km/h). The icon shown on the display represents the set speed limit.
37
1
38 KNOWING YOUR CAR
TRIP COMPUTER
GENERAL INFORMATION
The Trip computer is used to display information on car operation when the key is turned to MAR. This function is composed by separate trips, called “Trip A” and “Trip
B” which can monitor the entire mission (journey) in a reciprocally independent manner.
Both functions can be reset (reset means start of a new journey). “Trip A” is used to display the figures relating to:
– Range
– Trip distance
– Average consumption
– Current consumption
– Average speed
– Trip time (driving time)
– Trip A Reset
“Trip B” may be used to display the figures relating to:
– Trip distance B
– Average consumption B
– Average speed B
– Trip time B (driving time)
– Trip B Reset
N.B. “Trip B” may be disabled (see “Activating Trip B”).
“Range” and “Instant consumption” parameters cannot be reset.
Values displayed
Range
This indicates the approximate distance which can be travelled with the present amount of fuel in the tank. The display will show the reading ‘----’ when the following events take place:
– range value lower than 50 km (or 30 mi)
– car parked with engine running for long period.
IMPORTANT The range can be affected by several factors: driving style (see “Driving style” in the “Starting and driving” section), type of route (motorway, towns and cities, mountain roads, etc.), conditions of use (load, tyre pressures, etc.). Trip planning must therefore take the above into account.
Distance travelled
This indicates the approximate distance covered from the start of the new mission.
KNOWING YOUR CAR 39
Average consumption
This value shows the approximate average fuel consumption from the start of the new journey.
Current consumption
This indicates any change in fuel consumption. The value is constantly updated. The display will show ‘----’ if the car is parked with the engine running.
Average speed
This value shows the car’s average speed based on the overall time elapsed since the start of the new journey.
Journey time
Time elapsed since the start of the new journey.
Trip Reset
This resets the Trip computer settings
TRIP control button fig. 8
The TRIP button is located on the right hand lever. With the ignition key turned to MAR, this button allows you to view the previously described parameters and also zero them to begin a new mission:
– brief press to access the various parameter displays;
– long press to reset and then start a new mission.
1
L0E0007m fig. 8
40 KNOWING YOUR CAR
New mission
It begins after a reset:
– “manual” resetting by the user, by pressing the relevant button;
– “automatic” resetting, when the “Trip distance” reaches
9999.9 km or when the “Travel time” reaches 99.59
(99 hours and 59 minutes);
– disconnection/reconnection of the battery.
IMPORTANT The reset operation when “Trip A” details are being displayed resets the information associated with this function only.
IMPORTANT The reset operation when “Trip B” details are being displayed resets the information associated with this function only.
Start of journey procedure
With the ignition key in the MAR position, reset by pressing the TRIP button and keeping it pressed for more than
2 seconds.
Exit Trip
You can automatically exit the TRIP function once all the values have been displayed or by holding the SET button down for more than 1 second.
SYMBOLS
Special coloured labels have been attached near to or on some of the components of your car. These labels bear symbols that remind you of the precautions to be taken with regard to that particular component.
A plate summarising these symbols can be found under the bonnet.
KNOWING YOUR CAR 41
LANCIA CODE SYSTEM
This is an electronic engine locking system which increases protection against attempted thefts of the car. It is automatically activated when the ignition key is removed.
Each key contains an electronic device which modulates the signal emitted during ignition by an antenna built into the ignition device. The signal is the “password”, different every time the car is started, through which the control unit recognises the key and enables starting.
OPERATION
Each time the car is started by turning the ignition key to MAR, the Lancia CODE system control unit sends an acknowledgement code to the engine control unit to deactivate the immobilizer.
The code is sent only if the control unit of the Lancia
CODE system has acknowledged the code received from the key.
Each time the ignition key is turned to STOP, the Lancia CODE system deactivates the functions of the management engine control unit.
If the code is not recognised correctly during ignition, the
Y warning light (or symbol in the display) comes on.
In this case turn the key to STOP and then to MAR; if the immobilizer function persists, try again with the spare set of keys. Contact a Lancia Dealership if you still cannot start the engine.
IMPORTANT Each key has its own code which must be stored by the system control unit. To have new keys programmed (up to a maximum number of eight keys), contact a Lancia Dealership and be ready to present all the keys you have in your possession, the CODE card, a personal identity document and the car ownership documents. The key codes not presented during the programming procedure will be deleted to ensure that any keys that are lost or stolen cannot be used to start the engine.
Warning light Y (or symbol in the display) switching on whilst driving
❍ If the warning light Y (or symbol in the display) switches on, this means that the system is running a self-diagnosis test (caused, for example, by a voltage drop).
❍
If the warning light
Y
(or symbol in the display) remains on, contact a Lancia dealership.
The electronic components inside the key may be damaged if the key is submitted to strong shocks.
1
42 KNOWING YOUR CAR
KEYS
CODE CARD (for versions/markets where provided)
A CODE card fig. 9 is provided together with the vehicle keys. This should be presented to a Lancia Dealership should you require any duplicate keys.
IMPORTANT In order to ensure complete efficiency of the electronic devices inside the keys, they should never be exposed to direct sunlight.
KEY WITHOUT REMOTE CONTROL
(for versions/markets where provided)
The key is provided with a metal insert A-fig. 10, which operates:
❍ the ignition switch
❍ the door locks.
The ignition key and the CODE card must be handed over to the new owner when selling the car.
L0E0103m fig. 9
L0E0102m fig. 10
KNOWING YOUR CAR 43
KEY WITH REMOTE CONTROL fig. 11
The key is provided with a metal insert A, which operates:
❍ the ignition switch
❍ the door locks.
To open/close the metal insert, press button B.
Button
Ë remotely releases the doors locks.
In this case the timed lighting of interior courtesy lights and double flashing of direction indicators (for versions/ markets where provided) takes place.
Pressing button
Ë for longer than 2 seconds: window opening.
Button
Á is used to lock all the doors remotely.
In this case the interior roof lights switch off and the direction indicators flash once.
Pressing button
Á for longer than 2 seconds: window closing.
If one or more door are open, the doors will not be locked.
Button R is used to open the boot remotely.
The opening of the tailgate is signalled by the direction indicators flashing twice; when it is closed there is one flash (only with the alarm on, for versions/markets where provided).
Button B opens power-assisted opening of metal insert A.
To reinsert the metal insert into the grip, hold down button B and turn the insert in the direction shown by the arrow until you hear it click into place. Then release button B.
1 fig. 11
L0E0104m
44 KNOWING YOUR CAR
If the button for locking the doors
Á is accidentally pressed from the inside, only the doors opened for getting out of the car are released; the tailgate remains locked. To realign the system the locking/unlocking buttons
Á
/
Ë must be pressed again.
Only press button B-fig. 11 when the key is away from the body, particularly from your eyes and other objects that may be damaged
(e.g. clothing). Never leave the key unattended to make sure it is not touched by others, especially children, who may inadvertently press the button.
Replacing the battery of a key with remote control fig. 12
To replace the battery, proceed as follows:
❍ press button A and bring the metal insert B to the open position;
❍ turn the screw C to
: using a fine screwdriver;
❍ take out the battery case D and replace the battery
E, respecting its polarity;
❍ refit the battery case D inside the key and lock it by turning the screw C to
Á
.
Used batteries are harmful to the environment. They should be disposed of, as specified by law, in the special containers provided, otherwise take them to the Lancia Dealership, which will deal with their disposal.
Request for additional remote controls
The system can recognise up to 8 keys with incorporated remote control. Should a new remote control be necessary, contact a Lancia Dealership and be ready to present the CODE card, a personal identity document and the car’s ownership documents.
L0E0105m fig. 12
KNOWING YOUR CAR 45
Replacing the remote control cover fig. 13
Proceed as shown in the figure to replace the remote control cover.
SAFE LOCK DEVICE
(for versions/markets where provided)
This safety device prevents operation of the inside door handles and of the door locking/unlocking button. We recommend that you activate this device whenever you park your car.
Switching the device on
The device is enabled on all the doors by quickly double-pressing the
Á button on the key.
The engagement of the device is indicated by three flashes of the direction indicators and the flashing of a LED upon button A-fig. 13a. The device will not switch on if one or more doors are not closed correctly.
1 fig. 13
L0E0106m fig. 13a L0E0043m
46 KNOWING YOUR CAR
Switching the device off
The device disengages automatically by:
❍ opening the driver’s door using the metal insert;
❍ pressing the
Ë button on the remote control;
❍ turning the ignition key to the MAR position
Once the safe lock device is engaged it is impossible to open the doors from inside the car. Before engaging the device, check that there is no one left on board. If the remote control battery is flat, the device can only be disengaged by using the metal insert in either of the door locks.
ALARM
(for versions/markets where provided)
The alarm, in addition to all the remote control functions described previously, is controlled by the receiver located under the dashboard near the fuse box.
ALARM TRIPPING
The alarm intervenes in the following cases:
❍ when a door, the bonnet or the tailgate is opened illegally (perimeter protection);
❍ when the ignition system is operated (ignition key turned to MAR);
❍ cutting of the battery cables;
❍ movement inside the passenger compartment (volumetric protection);
❍ when the vehicle is lifted or tilted.
Depending on the market, the activation of the alarm causes the activation of the siren and the direction indicators (for about 26 seconds). Alarm tripping and the number of cycles depend on the sales market.
There is a maximum number of acoustic/visual cycles.
When this is reached the system returns to normal operation.
The volume sensing and anti-lift protection can be excluded by adjusting the dedicated control on the front roof light (see “Volumetric/anti-lift protection”).
KNOWING YOUR CAR 47
IMPORTANT The engine immobilizer function is guaranteed by the Lancia CODE, which is automatically activated when the ignition key is extracted from the starter device.
TURNING THE ALARM ON
With the doors and bonnet closed and the ignition key either turned to STOP or removed, point the key with the remote control towards the vehicle and press and release button
Á
.
Excluding some markets, the system produces an acoustic warning (beep) and enables door locking.
The switching on of the alarm is preceded by a self-diagnosis stage: if a fault is detected, the system emits a new acoustic signal together with the display of a message (see
“Panel warning lights” chapter).
In this case switch off the alarm by pressing
Ë
, check that all the doors, bonnet and tailgate are closed correctly; then switch the alarm back on by pressing
Á
.
If a door or the bonnet is not properly shut, it will be excluded from the testing by the alarm system.
If the alarm emits an acoustic signal even when the doors, bonnet and tailgate are correctly closed, a failure has occurred in system operation. Contact a Lancia Dealership.
IMPORTANT Centrally locking the doors using the metal insert on the key does not activate the alarm.
IMPORTANT The alarm is adapted to meet requirements in various countries.
TURNING THE ALARM OFF
Press button
Ë on the key with the remote control.
The following operations are performed (excluding some markets):
❍ the direction indicators flash briefly twice;
❍ two brief acoustic signals are emitted (“BEEP”);
❍ the doors are unlocked.
IMPORTANT Activating the central opening using the key’s metal insert does not turn the alarm off.
1
48 KNOWING YOUR CAR
VOLUMETRIC/ANTI-LIFT PROTECTION
To guarantee the correct operation of the protection system it is advisable to shut all the side windows and the sun roof (for versions/markets where provided).
If necessary, the function can be turned off (if, for example, you are leaving an animal in the car) by pressing button A-fig. 14, located in the front courtesy light, before activating the alarm itself.
When the function is disabled, this is indicated by the
LED on the button flashing for several seconds. Any disabling of the volume sensing/anti-lift protection must be repeated each time the instrument panel is switched off.
BREAK IN ATTEMPT INDICATION
Any break in attempt is indicated by the
Y warning light
(or symbol in the display) lighting up, together with a message shown in the display (see “Instrument panel warning lights” chapter).
DISABLING THE ALARM
To turn the alarm off completely (for example, if the vehicle is not being used for a long time) the vehicle must be closed by turning the metal insert in the key in the lock without using the remote control.
IMPORTANT If the battery of the key with the remote control runs out or the system fails, the alarm can be switched off by placing the key in the ignition switch and turning it to MAR.
L0E0153m fig. 14
KNOWING YOUR CAR 49
IGNITION DEVICE
The key can be turned to 3 different positions fig. 15:
❍ STOP: engine off, key can be removed, steering locked. Some electrical devices (e.g. sound system, central door locking system, etc.) can operate.
❍ MAR: driving position. All electrical devices can operate.
❍ AVV: engine starting.
The ignition switch is fitted with a safety system that requires the ignition key to be turned back to STOP if the engine does not start before the starting operation can be repeated.
STEERING LOCK
Engagement
When the key is at STOP, remove the key and turn the steering wheel until it locks.
Disengagement
Move the steering wheel slightly as you turn the ignition key to MAR.
IMPORTANT In some parking conditions (e.g.: wheels turned) the effort required to move the steering wheel and disengage the steering lock may be increased.
1
Never remove the key while the car is moving. The steering wheel would automatically lock as soon as you try to turn it. This also applies to when the car is towed. Under no circumstances should aftermarket operations be carried out involving steering system or steering column modifications (e.g. installation of anti-theft device). This could negatively affect performance and safety, invalidate the warranty, cause serious safety problems and also result in non-compliance of the car with type-approval requirements.
L0E0107m fig. 15
50 KNOWING YOUR CAR
SEATS
All adjustments on the front and rear seats must be made with the car stationary.
After releasing the adjustment levers always check that the seat is locked into place by trying to move it back and forth. Failure to lock the seat in place could result in the seat moving suddenly and the driver losing control of the car.
FRONT SEATS
Lengthwise direction adjustment fig. 16
Lift the lever A and push the seat forwards or backwards: in the driving position your arms should rest on the rim of the steering wheel.
Backrest angle adjustment fig. 16
Turn knob B.
fig. 16
L0E0008m
KNOWING YOUR CAR 51
Height adjustment fig. 16
Operate lever C to raise or lower the rear part of the seat cushion to improve comfort.
Lumbar adjustment (driver’s seat) fig. 16
The position of the back against the seat backrest is adjusted by turning knob D.
FRONT SEATS WITH ELECTRIC ADJUSTMENT fig. 17 (for versions/markets where provided
The adjustment is possible with the ignition ON or for up to 1 minute with the ignition key turned to OFF or extracted.
When the front doors are opened the seat on the side of the door that has been opened can be moved for about
3 minutes or until the door is closed.
The controls for seat adjustment are:
Multifunction control A:
❍ seat height adjustment;
❍ lengthwise seat movement.
Multifunction control B:
❍ backrest angle adjustment;
❍ backrest lumbar adjustment.
Seat heating fig. 17
(for versions/markets where provided)
With the key turned to MAR, press buttons
C to switch the function on/off.
When the function is enabled, the LED on the button turns on.
L0E0009m fig. 17
1
52 KNOWING YOUR CAR
REAR SEATS
Backrest angle adjustment
Lift lever A-fig. 18/a (one each side) for backrest angle adjustment, for the left or right part of the backrest (to aid this operation, slightly move the seat forwards using lever B).
Rear seat movement
(for versions/markets where provided)
The rear seats can be moved backwards and forwards (by
80 mm). To move the seats backwards or forwards operate the levers B (one on each side).
“Fixed” type rear seats
In some versions, rear seats are “fixed” type and the backrest angle adjustment is possible if the luggage compartment is extended. Use lever A-fig. 18/b (one each side) for backrest angle adjustment.
When repositioning the rear backrest during its movement, check that it has coupled correctly, grasping the backrest at the top and shaking it.
Before tilting the backrests, make sure that the seat belts are fully stretched, without any twisting.
L0E0231m fig. 18/a
L0E0010m fig. 18/b
KNOWING YOUR CAR 53
HEADREST
FRONT HEAD RESTRAINTS fig. 19
Head restraints are height adjustable; operate as follows.
❍ Upwards adjustment: lift the head restraint until it locks.
❍
Downward adjustment, press the button A and lower the head restraint.
To extract the rear head restraints press buttons B and
C simultaneously and release them upwards.
IMPORTANT If the rear seats are used, always set the head restraints in the “completely raised” position.
All adjustments must be carried out only with the vehicle stationary and engine off.
Head restraints must be adjusted so that the head, rather than the neck, rests on them. Only in this case they can protect your head correctly. To make the best use of the head restraint protection, adjust the seat back to keep a straight back, with the head as close as possible to its restraint.
REAR HEAD RESTRAINTS fig. 19
(for versions/markets where provided)
Depending on the versions, rear head restraints can be
“fixed” or height adjustable type.
Height-adjustable head restraints:
❍ Upwards adjustment: press the button B and lift the head restraint until it locks.
❍ Downward adjustment, press the button B and lower the head restraint.
fig. 19
L0E0011m
1
54 KNOWING YOUR CAR
STEERING WHEEL
It can be adjusted vertically (and axially).
To adjust the steering wheel, move the lever fig. 20 upwards to position 1. Adjust the steering wheel into the most suitable position and lock it in this position by moving the lever to position 2.
Any adjustments must be carried out only with the car stationary and engine off.
REAR VIEW MIRRORS
INTERIOR REAR VIEW MIRROR fig. 21
The mirror is fitted with a safety device that causes its release in the event of a violent impact with the passenger.
Lever A can be used to move the mirror to two different positions: normal or antiglare.
INTERIOR ELECTROCHROMIC
REAR VIEW MIRROR
(for versions/markets where provided)
Some versions have an electrochromic mirror with automatic antiglare function.
Engaging reverse gear, the mirror is automatically set for daytime use.
L0E0013m fig. 20
L0E0012m fig. 21
KNOWING YOUR CAR 55
DOOR MIRRORS
Rearview mirror electric folding fig. 22
(for versions/markets where provided)
Proceed as follows to adjust the position of the door mirrors:
❍ select the mirror using selector B;
❍ adjust the mirror using the controls A, in all four directions.
Manual rearview mirror folding fig. 23
When required (for example when the mirror causes difficulty in narrow spaces) it is possible to fold the mirror by moving it from position 1 (open), to position 2 (closed).
On some versions the door mirrors can be folded back electrically by operating a dedicated control.
When driving, the mirrors should always be in position 1. As the door mirrors are curved, they may slightly alter the perception of distance.
1 fig. 22
L0E0014m fig. 23
L0E0015m
56
CLIMATIC COMFORT
KNOWING YOUR CAR fig. 24 L0E0016m
VENTS fig. 24
1. Windscreen defrosting/demisting vents. – 2. Adjustable central vents – 3. Adjustable side vents – 4. Fixed vents for side windows – 5. Lower vents – 6. Rear adjustable vent.
KNOWING YOUR CAR
MANUAL CLIMATE CONTROL SYSTEM
57
1 fig. 25
CONTROLS fig. 25
A. Air temperature knob (red = hot/blue = cold)
B. Fan speed knob.
C. Air distribution knob
μ toward the body and the side windows
∑ toward the body, the side windows and the feet
∂ toward the feet only
∏ toward the feet and the windscreen
toward the windshield only.
L0E0017m
58 KNOWING YOUR CAR
IMPORTANT It is advisable to activate air recirculation in queues or in tunnels to prevent the introduction of polluted air. However, it is better not to use the function for long periods, particularly if there are many people on board, to prevent the windows from misting inside.
D. Air recirculation on/off button
(LED lit up when function is on).
E Manual climate control compressor on/off button
(LED lit up when function is on).
F Heated rear window activation/deactivation button.
When the function is active, an LED on the button is lit up. In order to maintain battery efficiency, the function is automatically deactivated after about
20 minutes.
FAST FRONT WINDOW AND FRONT SIDE
WINDOWS DEMISTING/DEFROSTING (MAX-DEF)
Proceed as follows:
❍ turn knob A to the red section;
❍ turn knob C to Ú ;
❍ turn knob D to ;
❍ turn knob B to 4 (maximum fan speed).
IMPORTANT The climate control system is very useful for fast demisting because it dries the air. Adjust the controls as described above and press knob B to switch the climate control system on: the LED on the knob will light up.
SYSTEM SERVICING
In winter, the climate control system must be turned on at least once a month for about 10 minutes. Have the system inspected at a Lancia Dealership before the summer.
KNOWING YOUR CAR
AUTOMATIC DUAL-ZONE CLIMATE CONTROL SYSTEM
(for versions/markets, where provided)
59
1 fig. 26 L0E0018m
The vehicle may be equipped with a dual zone automatic climate control system, fig. 26, which regulates the passenger side air temperature separately from the driver’s side.
The system is equipped with an AQS (Air Quality
System) function, which automatically switches on the air recirculation system if the outside air is polluted (e.g.
in traffic queues and tunnels).
60 KNOWING YOUR CAR
SWITCHING ON THE CLIMATE
CONTROL SYSTEM
The system can be activated by pressing any of the buttons; it is, however, advisable to set the desired temperatures on the display, then press the AUTO button.
The climate control system allows you to customise the temperatures (driver side and passenger side) with a maximum difference of 7 °C.
The climate control system compressor works only with the engine running and with an outside temperature of above 4 °C.
Automatic climate control operation
(AUTO function) A-fig. 26
Press the AUTO button; the system will automatically adjust:
❍ the amount of air introduced into the passenger compartment;
❍ the distribution of air inside the passenger compartment; cancelling any previous manual settings.
During climate control system automatic operation, the words FULL AUTO appear on the display.
During automatic operation it is still possible to adjust the set temperature and carry out the following operations manually:
❍ adjust fan speed;
❍ select air distribution;
❍ switch internal air recirculation and AQS function on/off;
❍ switch on the climate control system compressor.
It is advisable not to use the air recirculation function when the outside temperature is low to prevent the windows from rapidly misting up.
KNOWING YOUR CAR 61
Selecting air distribution B-fig. 26
Press one or more of buttons
䊱
/
䊲
/
˙
to manually select one of the 7 possible air distribution settings for the passenger compartment:
䊱
Air flow to the windscreen and front side window vents to demist/defrost them.
䊲
Air flow to the front and rear footwell vents. This air distribution allows the passenger compartment to be warmed up quickly.
䊱
Air flow distribution between the
˙
front and rear vents, centre/side dashboard vents,
䊲 rear vent and windscreen and front side window demisting/defrosting vents.
䊱
䊲
Air flow distribution between the footwell vents and the windscreen and front side window demisting/defrosting vents. This distribution setting allows the passenger compartment to be heated well and prevents the windows from misting up.
˙
Air flow distribution between footwell vents (hotter air) and centre/side dashboard vents and rear vent (cooler air).
Air flow distribution between centre/side dashboard vents, rear vent and windscreen and front side window demisting/defrosting vents. This distribution setting ventilates the passenger compartment and prevents the windows from misting up.
IMPORTANT For the climate control system to function, at least one of the following buttons must be on:
The system does not allow all the buttons switched off.
䊱
/
䊲
䊱
/
/
˙
䊲
/
˙
to be
.
IMPORTANT Push the OFF button to turn the climate control system back on: in this way, all previously saved operating conditions are restored before switching off.
To restore automatic control of the air distribution after a manual selection, press the AUTO button.
1
62 KNOWING YOUR CAR
Adjusting the fan speed fig. 26
Operate buttons C p to increase/decrease the speed of the fan.
The 12 possible speeds are indicated by bars lighting up on the display:
❍ max fan speed = all bars lit
❍ min. fan speed = one bar lit.
The fan can be disabled (no bars lit) only if the climate control compressor has been switched off by pressing button ❄ .
To restore automatic fan speed control after a manual adjustment, press AUTO.
Aligning the set temperatures (MONO function) fig. 26
Press button D (MONO) to align the temperature between the driver side and passenger side.
Then turn the AUTO or MONO knob to increase/decrease the temperature between the two areas by the same amount.
Press MONO again to deactivate the function.
Switching off the climate control system fig. 26
Press button E (OFF).
The following information is shown on the display:
❍ the word OFF;
❍ outside temperature reading;
❍ indication that air recirculation is switched on (LED on button T is lit).
KNOWING YOUR CAR 63
Heated rear window and door mirrors demisting/defrosting fig. 26
Press button F ( to activate; when this function is activated, the button LED lights up.
This function is timed and will turn off automatically after 20 minutes. Press the button ( again to switch the function off.
IMPORTANT Do not apply stickers on the inside of the rear window over the heating filaments to avoid damage that might cause it to stop working properly.
IMPORTANT Press T to introduce air from the outside (in this case the LED on the button is off).
Rapid front window demisting/defrosting
(MAX-DEF function) fig. 26
Press button G to automatically activate the timed operation of all the functions required to rapidly demist/ defrost the windscreen and front side windows.
The functions are:
❍ climate control compressor engagement (with an outside temperature of above 4 °C);
❍ switching off, if previously on, of the interior air recirculation (LED on button T off);
❍ switching on of heated rear window (LED on button
on) and door mirror heater coils;
❍ air temperature set to maximum;
❍ activation of air flow.
1
64 KNOWING YOUR CAR
Activation of air recirculation and enablement of AQS (Air Quality System) fig. 26
Press button T .
Internal air recirculation is carried out according to three possible operating modes:
❍ automatic control, signalled by the AQS sign on the display and the LED on button T being off;
❍ permanently off (air recirculation always off with introduction of external air), indicated by the LED on button T being off;
❍ permanently on (air recirculation always on), signalled by the LED on button T being lit up.
When OFF is pressed, the climate control system automatically activates air recirculation (the LED on button
T is on). It is still possible to activate outside air recirculation (LED on the button is off) and vice versa, by pressing button T .
With the OFF button pressed (LED on the button is lit up), it is not possible to enable the AQS (Air Quality System) function.
IMPORTANT The internal air recirculation system makes it possible to reach the required heating or cooling conditions faster. It is not advisable to switch the air recirculation on when it is rainy/cold or the windows might mist up, especially if the climate control is not turned on.
It is advisable to switch the internal air recirculation on while standing in queues or in tunnels to prevent the introduction of polluted air. Do not use the function for a long time, particularly if there are many passengers on board, to prevent the windows from misting up.
Enabling the AQS (Air Quality System) function
The AQS function (AQS appears on the display), automatically activates internal air recirculation when the outside air is polluted (e.g. in traffic queues and tunnels).
IMPORTANT With the AQS function active, after 15 consecutive minutes of the internal air recirculation system functioning, the climate control system enables the intake of outside air for approximately 1 minute to change the air in the passenger compartment. This takes place regardless of the pollution level of the outside air.
KNOWING YOUR CAR 65
Switching the climate control compressor on/off
I-fig. 26
Press button ❄ to switch on the climate control system compressor.
Compressor engagement
❍ the LED on button
❄ is lit up;
❍ symbol ❄ is shown on the display.
Compressor off
❍ the LED on button
❍ symbol
❄
❄ is off; off on the display;
❍ internal air recirculation is excluded;
❍ the AQS function is disabled.
With the climate control compressor switched off, air cannot be introduced into the passenger compartment at a lower temperature than the outside temperature; in this case the ❄ symbol on the display will flash.
The deactivation of the climate control compressor is memorised even after the engine has stopped. To turn the climate control compressor back on, press button ❄ again or press AUTO: if you press AUTO, the other manual settings will be cancelled.
EXTERNAL LIGHTS
The left-hand stalk operates most of the external lights.
The ignition key has to be in the MAR position for the exterior lights to come on. The instrument panel and the various dashboard controls will come on with the external lights.
DAYTIME RUNNING LIGHTS (DRL)
(for versions/markets where provided)
With the ignition key turned to MAR and the twist switch turned to position O the daytime running lights are automatically activated; the other lights and interior lighting remain off. The automatic operation of the day lights can be activated/deactivated via the display menu (see
“Display” paragraph in this chapter). If the daytime running lights are deactivated, no light comes on when the twist switch is turned to O .
1
L0E0019m fig. 27
66 KNOWING YOUR CAR
The daytime running lights are an alternative to the dipped beam headlights for driving during the daytime in countries where it is compulsory to have lights on during the day, and they are also permitted in those countries where this not obligatory.
Daytime running lights cannot replace dipped headlights when driving at night or through tunnels.
The use of daytime running lights is governed by the highway code of the country in which you are driving. Comply with legal requirements.
AUTOMATIC HEADLIGHT SENSOR
(dusk sensor) fig. 27
(for versions/markets, where provided)
It detects variations in brightness outside the vehicle depending on the light setting: the greater the sensitivity, the less outside light needed to activate the exterior lights being turned on. The sensitivity of the dusk sensor may be adjusted, using the “Set-up menu” on the instrument panel.
Activation
When the ring nut is turned to the AUTO position the external lights automatically switch on depending on the exterior brightness.
The headlights can only be flashed with the sensor on.
Deactivation
When the lights are switched off by the sensor, the dipped beam headlights and side lights are switched off and the day lights are switched on (if activated).
The sensor is not capable of detecting the presence of fog therefore, in these circumstances, the lights have to be turned on manually.
FRONT FOG LIGHTS WITH CORNERING LIGHTS
FUNCTION
When the dipped headlamps are on and the speed is below 40 km/h, if the steering wheel rotation angle is large or the direction indicators are on, a light (incorporated in the fog light) will come on on the relevant side to improve visibility at nightime. The function can be activated/deactivated via the display menu (see “Display” paragraph in this chapter).
KNOWING YOUR CAR 67
DIPPED HEADLIGHTS/SIDE LIGHTS
With the ignition key turned to MAR, turn the twist switch to 2 . If the dipped beam headlights are activated, the day lights are switched off and the side lights, dipped headlights and number plate lights are switched on. The warning light 3 on the instrument panel comes on.
When the ignition key is turned to STOP or removed and the twist switch is turned from O to 2 , all the side lights and taillights and number plate lights come on. The warning light 3 in the instrument panel comes on.
Parking function
With the side lights on and the ignition key in the STOP position or extracted, it is possible to select the lighting on the desired side by operating the lights lever downwards (left side) or upwards (right side). In this case the warning light 3 in the instrument panel will go out.
MAIN BEAM HEADLIGHTS
With ring nut in position 2 , push the stalk forward toward the dashboard (stable position). The warning light 1 on the instrument panel will come on. They are switched off by pulling the lever towards the steering wheel.
Flashing the headlights
You can flash the beams by pulling the stalk toward the steering wheel (unstable position). The warning light 1 on the instrument panel will come on.
DIRECTION INDICATORS fig. 28
Place the lever in the (stable) position:
– up (position a ): activates the right direction indicator;
– down (position b ): activates the left direction indicator.
The warning light ¥ or Î stars flashing on the instrument panel. The indicators switch off automatically when the steering wheel is straightened.
L0E0020m fig. 28
1
68 KNOWING YOUR CAR
LANE CHANGE FUNCTION
If you wish to signal a lane change, place the left lever in the unstable position for less than half a second. The direction indicator on the side selected will flash five times and then switch off automatically.
“FOLLOW ME HOME” DEVICE
This allows the space surrounding the car to be lit up for a certain period of time.
Activation
With the ignition key in the STOP position or extracted, pull the stalk towards the steering wheel and move it within 2 minutes of the engine switching off. At each single movement of the stalk, the lights will remain on for an extra 30 seconds up to a maximum of 210 seconds; then the lights are switched off automatically. Each time the lever is operated, the warning light 3 on the instrument panel comes on and the display shows how long the function will remain active. The warning light comes on when the stalk is pulled for the first time and stays lit until the function switches itself off automatically. Each time the stalk is activated the time will extend the time that the lights remain on.
Deactivation
Keep the stalk pulled towards the steering wheel for more than 2 seconds.
WINDOW WASHING
The right-hand lever fig. 29 controls windscreen wiper/ washer and heated rear window wiper/washer operation.
WINDSCREEN WIPER/WASHER fig. 29
This operates only with the ignition key turned to MAR.
The right hand lever can take up five different positions:
A: windscreen wiper off.
With the lever in position B, turn control F to select one of four different speeds for the intermittent operation mode:
, = very slow intermittent operation
■ = slow intermittent operation.
■■
■■■
= normal intermittent operation
= fast intermittent operation.
C: continuous slow operation;
D: continuous fast operation;
E: temporary fast operation (unstable position).
KNOWING YOUR CAR 69
“Smart washing” function
Pull the stalk towards the steering wheel (unstable position) to operate the windscreen washer. Keep the lever pulled to activate both the windscreen washer jet and the windscreen wiper with a single movement; the latter turns on automatically if you keep the lever pulled for over half a second. The windscreen wiper stops operating a few strokes after releasing the stalk; a further
“cleaning stroke”, after a few seconds, completes the wiping operation.
REAR WINDOW WASHER/ WIPER
This operates only with the ignition key turned to MAR.
Turn the ring nut to ' to operate the rear window wiper.
With the windscreen wiper on, turn the ring nut to ' to turn on the rear window wiper. In this case the wiper works (in the different positions) timed with the windscreen wiper, but at half speed. With the windscreen wiper on, engaging reverse gear will automatically turn the rear window wiper on, in continuous slow operation.
Operation stops when reverse is disengaged.
Do not use the windscreen or rear window wiper to remove layers of snow or ice from the windscreen. In these conditions, the windscreen wipers may be submitted to excessive effort resulting in motor protection cutting in and wiper operation inhibition for a few seconds. If the issue persists, contact a Lancia Dealership.
1
“Smart washing” function
Pushing the stalk towards the dashboard (unstable position) will activate the rear window washer.
Keep the stalk pressed, with just one movement, to operate the rear window washer jet and the rear window wiper itself; the latter automatically turns on if you keep the stalk pressed for more than half a second.
L0E0021m fig. 29
70 KNOWING YOUR CAR
The rear window wiper stops operating a few strokes after releasing the stalk; a further “cleaning stroke”, after a few seconds, completes the wiping operation.
RAIN SENSOR
(for versions/markets where provided)
The rain sensor A-fig. 30 is located behind the interior rear-view mirror in contact with the windscreen and automatically adjusts the frequency of the windscreen wiper strokes according to the rain intensity during intermittent operation.
The sensor has an adjustment range that varies progressively from wiper still (no stroke) when the windscreen is dry, to wiper at first continuous speed (slow continuous operation) with intense rain.
Activation
Move the right lever down by one click.
The activation of the sensor is signalled by a “stroke” to show the command has been acquired.
IMPORTANT Keep the glass in the sensor area clean.
By turning ring nut F-fig. 29 is it possible to increase the sensitivity of the rain sensor to obtain a more rapid variation between wiper still (no stroke) when the windscreen is dry, to wiper at first continuous speed (slow continuous operation).
The increasing of the rain sensor sensitivity is signalled by a “stroke” to show the command has been acquired.
When the windscreen washer is operated with the rain sensor activated, the normal washing cycle is performed, at the end of which the rain sensor resumes its normal automatic function.
L0E0023m fig. 30
KNOWING YOUR CAR 71
Deactivation
Turn the ignition key to STOP.
The next time the vehicle is started (ignition key turned to MAR), the sensor is not reactivated even if the lever is still in position B-fig. 29. To activate the sensor, move the lever to position A or C and then back to position B.
Rain sensor activation will be indicated by at least one wiper “stroke” even if the windscreen is dry.
Do not activate the rain sensor when washing the car in an automatic car wash.
CRUISE CONTROL
(constant speed regulator)
(for versions/markets, where provided)
This is an electronically controlled driving assistance device which allows the vehicle to be driven at a chosen speed above 30 km/h on long stretches of dry, straight roads with few variations (e.g. motorways), without having to depress the accelerator pedal.
It is therefore not recommended to use this device on country roads with traffic. Do not use it in town.
TURNING THE DEVICE ON
Turn the ring nut A-fig. 31 to ON.
The device must only be switched on in gears higher than
4t h .
Make sure the device is switched off if there is ice on the windscreen.
1
Make sure the device is switched off whenever the windscreen is being cleaned.
L0E0022m fig. 31
72 KNOWING YOUR CAR
When travelling downhill with the device engaged, the vehicle speed may slightly exceed the preset one.
The engagement of the device is signalled by the
Ü warning light coming on in the instrument panel (together with a message shown on the display) (see “Instrument panel warning lights” paragraph in this chapter).
STORING THE SPEED
Proceed as follows:
❍ turn the ring nut A-fig. 31 to ON and press the accelerator until the vehicle reaches the desired speed;
❍ turn the ring nut to (+) for at least three seconds, then release it. The vehicle speed is now memorised and you can therefore release the accelerator pedal.
If needed (when overtaking for instance), you can accelerate simply by pressing the accelerator pedal; when you come off the pedal, the car will return to the speed memorised previously.
RESTORING THE MEMORISED SPEED
If the device has been switched off, for example by depressing the brake or clutch pedal, the memorised speed can be restored as follows:
❍ accelerate gradually until reaching a speed approaching the memorised speed;
❍ engage the gear selected at the time of speed memorising (fourth, fifth or sixth gear);
❍ press button C-fig. 31.
INCREASING THE MEMORISED SPEED
This can be done in two ways:
❍ by pressing the accelerator and then memorising the new speed reached; or
❍ by temporarily turning ring nut B-fig. 31 to (+).
Each movement of the selector wheel will correspond to a slight increase in speed (about 1 km/h), while keeping the selector wheel turned will correspond to a continuous speed increase.
REDUCING THE MEMORISED SPEED
This can be done in two ways:
❍ by disengaging the device and then memorising the new speed; or
❍ by keeping ring nut B-fig. 31 turned to (–) until the new speed is reached; it will then be memorised automatically.
Each movement of the ring nut will corresponds to a slight reduction in speed (about 1 km/h), while keeping the ring nut turned will correspond to a continuous reduction in speed.
KNOWING YOUR CAR 73
TURNING THE DEVICE OFF
Turn the ring nut A-fig. 31 to OFF or turn the ignition key to STOP. The device is automatically turned off in one of the following cases:
❍ when the brake or clutch pedal is pressed;
❍ if the ASR or Advanced ESP system cuts in (for versions/markets where provided).
While travelling with the device engaged, do not place the gear lever in neutral.
ROOF LIGHTS
FRONT ROOF LIGHT WITH SPOT LIGHTS fig. 32
Switch A is used to switch on/off roof lights.
With the switch A in the middle position, the lights C and
D go on/off when front doors are opened/closed.
With switch A pressed to the left, the lights C and D are always off. With switch A pressed to the right, the lights
C and D are always on.
Lights switch on/off progressively.
Switch B controls the spot light function; when the roof light is off, it switches on individually:
❍ the light C when pressed to the left;
❍ the light D when pressed to the right.
In case of malfunction or if the device is faulty, turn the control A-fig. 31 to OFF and contact a Lancia Dealership, after checking that the protective fuse has not blown.
1
L0E0024m fig. 32
74 KNOWING YOUR CAR
On the roof light, some bulbs light the car interior when the main beam headlamps or dipped headlamps are on.
IMPORTANT The roof light in fig. 32, for some versions, may also be in a rear central position (electric sun roof version).
IMPORTANT Before getting out of the car, make sure that both switches are in the middle position; when the doors are closed, the lights switch off preventing a possible battery discharging. In any case, if the switch is left in on position, the roof light switches off automatically
15 minutes after the engine switching off.
Courtesy light timing
To make getting in and out the vehicle easier, especially at nighttime or in poorly lit areas, two timing logics are available.
Timing while getting into the vehicle
The roof lights switch on according to the following modes:
❍ for around 10 seconds when the front doors are unlocked;
❍ for about 3 minutes when one of the side doors is opened;
❍ for about 10 seconds when the doors are closed.
The timed period is interrupted when the ignition is turned to “MAR”.
Timing while getting out of the vehicle
After removing the key from the ignition, the courtesy lights switch on according to the following modes:
❍ within 2 minutes of the engine being switched off for a period of about 10 seconds;
❍ when one of the side doors is opened for a period of about 3 minutes;
❍ when one of the doors is closed for a period of about
10 seconds;
❍ if the fuel cut off switch operates, they remain on for about 15 minutes, then they switch off automatically.
Door locking switches the lights off immediately (unless the fuel cut off switch is operating).
L0E0025m fig. 33
KNOWING YOUR CAR 75
REAR ROOF LIGHT fig. 33
Press the point indicated by the arrow to switch the lights on/off (+ sign on the roof light lens cover).
The rear roof lights also come on in conjunction with events that cause the front roof light to come on.
LUGGAGE COMPARTMENT LIGHT fig. 34
This light comes on automatically when the luggage compartment is opened and switches off when it is closed.
CONTROLS
DUALDRIVE ELECTRIC POWER STEERING
SYSTEM fig. 35
Press button A to turn the CITY function on (see “electric power steering” paragraph). When this function is on, the wording CITY on the instrument panel will turn on. Press the button again to turn the function off.
SPORT FUNCTION CONTROL fig. 35
(for versions/markets where available)
Press button B to activate the sports driving setting. This features more responsive acceleration and increased force required at the steering wheel to produce a more sporty feel.
1
L0E0027m fig. 34
L0E0026m fig. 35
76 KNOWING YOUR CAR
When this function is on (see “SPORT function”), the word SPORT is lit up in the display. Press the button again to turn the function off and restore the normal driving setting.
On some versions, with the CITY function activated, the SPORT function is not available. To activate the SPORT function, deactivate the CITY function and vice versa, because they are reciprocally incompatible.
HAZARD WARNING LIGHTS fig. 36
These lights are switched on by pressing button A, regardless of the position of the ignition key. With the device on, warning lights
Î
and
¥
light up in the instrument panel. To switch off the lights, press button A again.
The use of hazard warning lights is governed by the highway code of the country you are in. Comply with legal requirements.
Emergency braking
During emergency braking, the hazard warning lights come on automatically and lights
Î
and
¥
on the panel come on at the same time. The function switches off automatically when the nature of the braking changes. This function complies with the relevant legislations currently in force.
FOG LIGHTS (for versions/markets where provided)
(versions without Start&Stop) fig. 37
Press button A to activate the front fog lights. When the front fog lights are activated the 5 warning light is lit up in the instrument panel. The front fog lights are activated when the dipped headlights are on.
L0E0029m fig. 36
L0E0028m fig. 37
KNOWING YOUR CAR 77
REAR FOG LAMPS
(versions without Start&Stop) fig. 37
To turn the lamps on press the button B with the dipped beam lights on. With lights on, the warning light 4 on the instrument panel will switch on. Press the button again to turn the lights off.
FOG LIGHTS (for versions/markets where provided) /
REAR FOG LIGHTS
(versions with Start&Stop) fig. 37a
Press button A to activate the front fog lights. When the front fog lights are activated the 5 warning light is lit up in the instrument panel; when the rear fog lamps are on, the warning light 4 turns on in the instrument panel
AFS ADAPTIVE LIGHTS
(Adaptive Xenon Lights) fig. 38
The adaptive lights (see “Headlights” paragraph in this chapter) are activated automatically when the car is started up. In this situation the LED (amber) on button
A will remain off.
Press button A to deactivate the adaptive lights (if activated); they will be deactivated and the LED on button
A will come on constantly. Press AFS button again to turn the adaptive lights on (LED off on the button).
In the event of a system failure, an indication is provided on the instrument panel by the flashing of warning light f or the symbol f appearing on the display along with a dedicated message (for versions/markets where provided).
1 fig. 37a
L0E0198m fig. 38
L0E0030m
78 KNOWING YOUR CAR
FUEL CUT-OFF SYSTEM
This intervenes in the case of an impact causing:
❍ cut off of fuel supply with resultant engine shut down;
❍ automatic door lock release;
❍ activation of all lights inside the car.
When the system has been triggered, the message “Fuel cut off, see handbook” is displayed.
Carefully check the car for fuel leaks, for instance in the engine compartment, under the car or near the tank area.
Following a collision, turn the ignition key to STOP to avoid draining the battery.
To restore correct car operation, follow this procedure:
❍ turn the ignition key to MAR;
❍ activate the right hand indicator;
❍ deactivate the right hand indicator;
❍ activate the left hand indicator;
❍ deactivate the left hand indicator;
❍ activate the right hand indicator;
❍ deactivate the right hand indicator;
❍ activate the left hand indicator;
❍ deactivate the left hand indicator;
❍ turn the key to STOP.
If, after a crash, you smell fuel or notice leaks from the fuel system, do not reactivate the system to avoid the risk of fire.
KNOWING YOUR CAR 79
INTERIOR FITTINGS
SUN VISORS fig. 39
They are located at the sides of the internal rear view mirror.
They can be adjusted forwards and sideways.
A mirror is provided on the back of the sun visors. This is illuminated by roof light A. The driver and passengerside sun visors also feature a document holder.
FRONT ARMREST WITH STORAGE
COMPARTMENT
This is located between the front seats. A storage compartment and cooled drinks compartment is located inside the armrest (for versions/markets, where provided)
(see following sections). The armrest can be moved backwards and forwards by operating the cover A-fig. 40.
Glove compartment
Lift up cover A-fig. 40: you can thus access the storage compartment B-fig. 40.
1 fig. 39
L0E0032m fig. 40
L0E0033m
80 KNOWING YOUR CAR
Cooled drinks compartment
(for versions/markets, where provided)
Press button A-fig. 41 and lift up armrest B: you can then access the cooled drinks compartment fig. 41.
IMPORTANT The function of the compartment is to maintain the temperature of the drinks that are put in which should be heated or cooled beforehand. The drinks will remain hot if the heater is switched on or cool if the compressor is switched on. fig. 41
L0E0034m
KNOWING YOUR CAR
REAR ARM REST
(for versions/markets where provided)
To use the arm rest A-fig. 42 lower it as shown in the figure (for this operation the central head rest must be “all up”).
There are two compartments B in the armrest for housing glasses and/or cans.
To use these, pull C tab in the direction shown by the arrow.
These is also an storage compartment provided in the armrest; this can be accessed by raising the flap.
81
1 fig. 42
L0E0035m
82 KNOWING YOUR CAR
GLOVE COMPARTMENT
To open the glove compartment, operate handle A-fig.
43.
When the compartment is opened a courtesy light comes on inside which remains on for about 15 minutes with the ignition in the STOP position.
If, during this period, a door or the tailgate is opened, the
15 minute timing is reset.
CUP/BOTTLE HOLDERS fig. 45
The centre tunnel has two cup/can holders.
Never travel with the glove box open: it could injure the passenger in the event of a crash.
fig. 43
L0E0037m fig. 45
L0E0038m
KNOWING YOUR CAR 83
POWER SOCKET (12 V)
(for versions/markets where provided)
Power socket A-fig. 46 is located on the centre tunnel and is only operational when the ignition key is turned to
MAR. If a smokers kit is requested, the socket is replaced by a cigar lighter.
On some versions an additional power socket B-fig. 46 is provided in the luggage compartment.
Only accessories with a maximum power of
180 W (maximum absorption 15 A) can be connected to the socket.
CIGAR LIGHTER
(for versions/markets where provided)
This is located on the central tunnel.
To turn the cigar lighter on, press button A-fig.47 with the ignition in the MAR position.
After a few seconds the button goes back to its initial position and the cigar lighter is ready for use.
IMPORTANT Always make sure the cigar lighter is switched off.
IMPORTANT The cigar lighter gets very hot. Handle it carefully and make sure children don’t touch it: risk of fire and/or burning.
1 fig. 46
L0E0039m fig. 47
L0E0040m
84 KNOWING YOUR CAR
ASHTRAY
This is a plastic container fig. 48 that can be extracted with a spring action and placed in the cup/can holder in the centre tunnel.
IMPORTANT Do not use the ashtray as a waste paper basket: it might catch fire in contact with cigarette stubs.
SUNROOF
(for versions/markets where available)
The large electric sun roof comprises two glass panels; the front one is mobile and the rear one fixed. These are equipped with two sun blinds (front and rear) that can be moved manually. With the sun roof closed, the blinds can be placed in any position. To open the blinds: grip handle C-fig. 49, and move the blind to the required position by following the direction of movement shown by the arrow. To close them, carry out the procedure in reverse. The sun roof can be operated only with the ignition key turned to MAR. The controls A-B fig. 49 on the front courtesy light trim operate the roof opening/closing functions.
Opening
Press and hold down button B-fig. 49. The front glass panel will move into the spoiler position; press button B once again and hold down for more than half a second to automatically move the sun roof to an intermediate position (“Comfort” position). If the opening control is pressed again for more than half a second, the roof will automatically continue until it reaches the end of travel position; the roof glass can be stopped in an intermediate position by operating the button again.
IMPORTANT During the sun roof opening operation, the blind will follow the movement of the sun roof.
L0E0041m fig. 48
KNOWING YOUR CAR 85
Closing
With the roof in the fully open position, press button
A-fig. 49 and, if the button is operated for more than half a second, the front roof glass will automatically assume the intermediate position (comfort position).
If the button is operated again for about half a second the roof will assume the spoiler position. Lastly, if the closing button is pressed again, the roof will assume the fully closed position.
IMPORTANT The blind will remain in the fully open position when closing the sun roof. If you would like to close it, this must be done manually.
Use the sunroof only at “spoiler” position if cross roof racks are fitted. Never open the roof in presence of snow or ice to prevent damage.
1
When leaving the vehicle, always remove the key from the ignition to avoid the risk of injury to those still inside the car due to accidental operation of the sunroof. Improper use of the roof can be dangerous. Before operation, always check that no-one is at risk of being injured by the moving sunroof or by objects getting caught and dragged by it.
Anti-pinch device
The sun roof has an anti-pinch safety system capable of detecting the presence of an obstacle whilst the roof is closing; when this happens, the system stops and the movement of the glass is immediately reversed.
L0E0108m fig. 49
86 KNOWING YOUR CAR
INITIALISATION PROCEDURE
After the battery has been disconnected or a fuse has blown, the operation of the sun roof must be initialised again.
Proceed as follows:
❍ press button A-fig. 49 until the sun roof is completely closed. Release the button;
❍ press and hold down button A for at least 10 seconds and/or until the glass panel moves forwards by one click. Release the button at this point;
❍ press button A within 5 seconds of this operation and keep it pressed: the glass panel will complete a full opening and closing cycle. Release the button only at the end of this cycle.
EMERGENCY OPERATION
If the switch does not work, the sunroof can be operated manually as follows:
❍ remove protective cap A-fig. 50 on the rear part of the internal cover;
❍ take the Allen key provided from the container with the on-board documentation or from the luggage compartment (versions with Fix&Go automatic);
❍ fit the key into seat B and turn it:
– clockwise to open the roof;
– anticlockwise to close the roof.
fig. 50
L0E0109m
KNOWING YOUR CAR 87
DOORS
LOCK/RELEASE FROM OUTSIDE fig. 51
Door release
To release all doors: turn the key to position 1. Pull up the associated handle to open the door. Press button
Ë on the remote control to unlock the doors.
Door lock
To lock all doors: turn the key to position 2 with doors fully closed.
Press button
Á on the remote control to lock the doors.
If one of the doors is not shut properly, simultaneous locking is disabled.
IMPORTANT If one of the doors is not properly closed or if there is a fault in the system, the central locking will not engage. If the operation is repeated 10/11 times in quick succession, the device is excluded for approximately 30 seconds.
Before opening a door, ensure that you can do it in conditions of safety. Open the doors only when the car is stationary.
1 fig. 51
L0E0042m
88 KNOWING YOUR CAR
LOCK/RELEASE FROM INSIDE fig. 52
Press the door lock/release button A, located in the dashboard, from inside the car (with the doors shut). If the electrical system has failed, it is still possible to lock the doors manually.
CHILD LOCK SYSTEM B-fig. 53
To prevent opening the rear doors from the inside.
This device can only be engaged with the doors open:
❍ position 1 – device engaged (door locked);
❍ position 2 – disengaged (door can be opened from inside).
The device remains engaged even if the doors are unlocked remotely.
IMPORTANT The rear doors cannot be opened from the inside when the child-lock system is engaged.
Always use this device when carrying children.
After engaging the child lock on both rear doors, check for proper engagement by trying to open a rear door with the internal handle.
L0E0043m fig. 52
KNOWING YOUR CAR 89
EMERGENCY LOCKING DEVICE PASSENGER
SIDE FRONT DOOR AND REAR DOORS
The passenger side front door and the rear doors have a device to lock them when there is no power.
Proceed as follows:
❍ engage the metal insert of the starting key in position
A - fig. 53 (rear doors) or A - fig. 53a (front passenger side door);
❍ turn the key counter-clockwise and then remove it from position A - fig. 53 or A - fig. 53a.
The door lock knob can be realigned (only when the battery charge has been restored) as follows:
❍ press button
Ë on the key;
❍ press door lock/release button ≈ in the dashboard;
❍ open a front door by inserting the key into the key pawl;
❍ operate the internal door handle.
1 fig. 53 L0E0291m fig. 53a L0E0290m
90 KNOWING YOUR CAR
If the child lock was engaged and the previously described locking procedure carried out, operating the internal handle will not open the door but will only realign the door lock knobs. To open the door, the outside handle must be used. The door central locking/unlocking button is not disabled by the engagement of the emergency lock ≈ .
IMPORTANT If the battery is disconnected or the protection fuse blows, the luggage compartment opening/ closing mechanism must be initialised as follows:
❍ shut all the doors;
❍ press button
Á on the key or door lock/release button ≈ in the dashboard;
❍ press button
Ë on the key or door lock/release button ≈ in the dashboard.
POWER WINDOWS
These operate when the ignition key is turned to MAR and for about 2 minutes after turning the key to STOP or removing it.
The control buttons are located in the door panels (the driver side door panel can be used to operate all the windows).
An anti-pinch device is operated when the front windows are lifted.
CONTROLS fig. 54
A. opening/closing left hand front window; “continuous automatic” operation during window opening/closing stage;
B. opening/closing right hand front window; “continuous automatic” operation during window opening/ closing stage;
C. enabling/disabling of rear door electric window controls;
D. opening/closing left hand rear window (for versions/ markets, where provided); “continuous automatic” operation during window opening/closing stage;
E.opening/closing right hand rear window (where provided); “continuous automatic” operation during window opening/closing stage.
KNOWING YOUR CAR 91
Press the buttons to open/close the required window.
When one of the two buttons is pressed briefly, the window moves in stages; if the button is held down, “continuous automatic” operation is activated both for closing and opening. If the button is pressed again the window will stop in its current position. Holding the button pressed for a few seconds will automatically raise or lower the window (only with key on MAR).
Passenger side front door/rear doors
On the passenger side front door control panel, and on some versions also on the rear doors, buttons F-fig. 54 are provided to control the associated windows.
1
Incorrect use of the power windows may be dangerous. Before and during operation ensure that passengers are not at risk from the moving glass, either directly or through personal objects getting caught in the mechanism.
Always remove the ignition key when leaving the car to prevent the electric windows being operated accidentally and constituting a danger to the passengers in the car.
L0E0045m fig. 54
92 KNOWING YOUR CAR
Anti-crush safety device
The vehicle is equipped with an anti-pinch safety device for the raising of the front windows.
This safety system detects the presence of an obstacle during the window closing travel and cuts in by stopping and reversing the window travel, depending on its position. This device is also useful if the windows are activated accidentally by children on board the vehicle.
The anti-pinch function is active both during manual and automatic operation of the electric windows. Following the intervention of the anti-pinch system, the window travel is immediately interrupted and subsequently reversed until the lower end of travel is reached. The window cannot be operated in any way during this time.
IMPORTANT If the anti-pinch protection intervenes 5 consecutive times within a minute or is faulty, the automatic closing operation of the window is inhibited, only allowing it in steps of half a second; the button is released for the subsequent manoeuvre.
In order to restore the correct operation of the system, one of the following manoeuvres must be performed:
❍ switch off and restart the engine;
❍ fully lower the window concerned.
IMPORTANT With ignition key at STOP or removed, the electric windows remain active for about 3 minutes and are deactivated when a door is opened.
KNOWING YOUR CAR 93
Electric window system initialisation
The system must be re-initialised after disconnecting the battery or if the relevant protection fuse is blown.
Initialisation procedure:
❍ fully close the window to be initialised manually;
❍ once fully closed, keep holding down the closing control for at least 1 second.
IMPORTANT Where provided, after there has been no power supply for the control units (battery replaced or disconnected or protective fuses for the electric window control units replaced), the automatic operation of the windows must be restored.
The restoration procedure must be performed as follows with the doors closed:
1. completely open the driver’s door window keeping the operating button pressed for at least three seconds after the (lower) end of travel position;
2. completely raise the driver’s side window and keep the button pressed for at least three seconds once the end of travel position (upper end stop) has been reached;
3. repeat stages 1 and 2 for the passenger-side window
4. make sure that the initialisation is correct by checking that the windows work automatically.
IMPORTANT With central locking on, operating the internal handle of one of the doors will unlock all the doors.
If there is no electric power supply (fuse blown, battery disconnected, etc.) it is still possible to operate the door locking manually; in this case the automatic lowering function for the windows is not available and to open or close the door with the window closed it is necessary to exert pressure on the window towards the inside of the vehicle to facilitate the movement of the window on the moulding.
1
94 KNOWING YOUR CAR
BOOT
OPENING THE TAILGATE
When unlocked, the luggage compartment can be opened from the outside using the handle fig. 55.
The tailgate can be opened at any time, if the doors are unlocked.
The key with remote control should be used to open the tailgate.
If the luggage compartment is not closed correctly, this is indicated by the warning light ´ coming on in the instrument panel or the icon R appearing in the display together with a dedicated message (see “Instrument panel warning lights” paragraph in this chapter).
Opening the tailgate will switch the boot light on: the light will go off automatically when closing the tailgate.
The light will stay on for about 15 minutes after turning the key to STOP: if during this time, a door or the tailgate is opened, the light will switch on again for 15 minutes.
Opening the tailgate using the key with remote control
To release the tailgate lock press R . Luggage compartment opening is indicated by the double flashing of the direction indicators; tailgate closing is indicated by single flashing (only with the alarm switched on, where provided).
L0E0046m fig. 55
KNOWING YOUR CAR
CLOSING THE TAILGATE fig. 56
To close, lower the tailgate pressing near the lock until you hear it click. There are handles B provided inside the tailgate to allow it to be closed more easily.
Never exceed the maximum allowed load in the luggage compartment; see chapter 6.
Make sure that the objects are well arranged in the boot so that they will not be projected forwards following sudden braking. Never travel with the tailgate open: exhaust gases may get into the passenger’s compartment.
95
1
If you travel in areas with few filling stations and you want to transport fuel in a spare tank, comply with the regulations in force and use only an approved, suitably secured tank. In the event of a collision the fire risk is increased all the same.
Take care not to knock objects on the roof rack when opening the tailgate.
L0E0047m fig. 56
96 KNOWING YOUR CAR
OPENING THE TAILGATE IN AN EMERGENCY fig. 57
To open the tailgate from the passenger compartment if the car battery is flat or the electric tailgate lock is faulty, proceed as follows (see “Extending the boot”).
❍ remove the rear head restraints;
❍ fold over the backrests;
❍ operate lever A to unlock the tailgate mechanically from inside the luggage compartment.
EXTENDING THE BOOT
IMPORTANT If the rear seat backrest is folded down, releasing the rear curtains of the parcel shelf is strictly compulsory (follow the specific indications in the “Parcel shelf” paragraph).
The luggage compartment can be partially (1/3 or 2/3) or totally extended by splitting the rear seat fig. 58.
fig. 57
L0E0048m
KNOWING YOUR CAR
Proceed as follows to extend the luggage compartment:
❍ completely lower the rear seat head restraints;
❍ move the seat belt to the side, making sure that it is fully extended and not twisted;
❍ release the parcel shelf curtain (for versions/markets, where provided) from the backrests (see the paragraph “Parcel shelf” on the next pages);
❍ operate one of the levers A-fig. 59 to tilt the desired seat (to aid this operation, slightly move the seat forward using lever B);
97
1 fig. 59
L0E0110m fig. 59
L0E0049m
98 KNOWING YOUR CAR
To extend the luggage compartment further, the rear seats can be pushed forwards by operating handle B-fig. 59
(for versions/markets where provided).
IMPORTANT In order to achieve a uniformly flat load platform, the head restraints should be placed in the fully extended position before the seats are folded back.
REPOSITIONING THE REAR SEAT
To facilitate the backrest repositioning manoeuvre, it is helpful to bring the seat cushion completely forward before folding back the seats.
Move the seat belts to the side, making sure that they are correctly extended and not twisted.
Press levers A-fig. 59, lift up the backrests and push them backwards until you hear a click from both attachment mechanisms. Use handle B-fig. 59 (for versions/markets where provided) to move the seats back until you hear a click.
Make sure the backrest is properly secured at both sides to prevent it moving forward in the event of sharp braking that may cause injuries to passengers.
KNOWING YOUR CAR 99
PARCEL SHELF
To take out the parcel shelf, proceed as follows:
❍ release the curtains of the parcel shelf A - fig. 60 from the attachments B on the rear seat backrests;
❍ grasp the tangs C and guide the curtains in the reel;
❍ release attachments A-fig. 61 (one on each side);
❍ release attachments B-fig. 61, rotate the parcel shelf through 90° and slide it out.
To refit the parcel shelf, reverse the removal instructions.
1 fig. 60
L0E0284m fig. 61
L0E0051m
100 KNOWING YOUR CAR
BONNET
OPENING fig. 62
Proceed as follows:
❍ pull lever A in the direction indicated by the arrow;
❍ agire sulla levetta B come indicato in figura;
❍ lift the bonnet and, at the same time, release stay rod
C from its catch, then insert the end of the rod into housing D in the bonnet (larger hole) and push to safety position (smaller hole), as shown in the diagram.
Incorrect positioning of the stay rod may cause the bonnet to drop suddenly. This should only be done when the car is stationary.
Before opening the bonnet, check that windscreen wiper arm is not lifted from the windscreen.
fig. 62
L0E0295m
KNOWING YOUR CAR
With hot engine, proceed with the utmost care inside the engine compartment to avoid burns. Do not place your hands close to the fan: it might start working even with the ignition key removed. Wait for the engine to cool.
Pay attention to scarves, ties and other loose fitting garments. If they accidentally touch moving parts, they may easily get caught up with serious risks for those who wear them.
101
CLOSING fig. 62
Proceed as follows:
❍ Hold the bonnet up with one hand and with the other remove rod C from housing D and put it back into its catch;
❍ Lower the bonnet to approximately 20 centimetres from the engine compartment and let it drop. Make sure that the bonnet is completely closed and not only fastened by the safety catch by trying to open it. In this case, do not press the bonnet down, rather lift it again and repeat the procedure.
For safety reasons, the bonnet must always be properly closed while the car is travelling. Make sure that the bonnet is properly closed and that the lock is engaged. Should you notice that the bonnet is not properly secured while travelling, stop the car immediately and close the bonnet safely.
1
102 KNOWING YOUR CAR
ROOF RACK/SKI RACK
FASTENERS
The attachments are located in the areas illustrated in fig. 63 and can only be reached with the doors open.
Lineaccessori provides a specific roof rack/ski rack for the tailgate.
IMPORTANT Follow the instructions contained in the assembly kit carefully. Assembly must be performed by qualified personnel.
Comply with applicable laws concerning maximum overall dimensions.
Evenly distribute the load and take into account, when driving, the increased responsiveness of the car to side wind.
Never exceed the maximum permitted loads; see chapter “6”.
fig. 63
L0E0111m
KNOWING YOUR CAR 103
HEADLIGHTS
HEADLIGHT BEAM AIMING
The correct aiming of the headlights is important for the comfort and safety of not only the driver but all other road users. This is also covered by a specific rule of the highway code.
The headlights must be correctly aimed to guarantee the best visibility conditions for all drivers while travelling with headlights on.
Contact a Lancia Dealership to have the headlights properly adjusted.
Check beam alignment every time the load or its distribution changes.
ANGLE COMPENSATION fig. 64
The car is fitted with an electric headlight alignment system. This system is operational with the ignition key turned to MAR and the dipped beam headlights on.
When the car is loaded, it slopes backwards. This means the headlight beam rises.
In this case, it is necessary to adjust the beams using buttons A and B.
The display provides a visual indication of the positions during adjustment.
Correct positions depending on the load
Position 0 – one or two people in the front seats.
Position 1 – five passengers.
Position 2 – five people + load in the boot.
Position 3 – driver + maximum permitted load stowed in the luggage compartment.
FRONT FOG LIGHTS ALIGNMENT
(for versions/markets where provided)
Contact a Lancia Dealership to have the lights properly adjusted.
1
L0E0054m fig. 64
104 KNOWING YOUR CAR
ADJUSTING THE HEADLIGHTS WHEN ABROAD
Dipped headlights are adjusted to drive in the country where the vehicle was originally purchased. When travelling in countries with opposite driving direction, to avoid blinding the drivers on the other side of the road, you need to cover the headlight areas depending on the
Highway code of the country you are travelling in.
ADAPTIVE LIGHTS (AFS – Adaptive Xenon Light)
This is a system combined with Xenon headlamps which directs the main light beam and continuously and automatically adapts it to the driving conditions round bends/when cornering. The system directs the light beam to light up the road in the best way, taking into account the speed of the vehicle, the bend/corner angle and the speed of steering.
Activating/deactivating the system fig. 65
The adaptive lights are automatically activated when the vehicle is started. In this situation the LED (amber) on button A will remain off.
Press button A to deactivate the adaptive lights (if activated); they will be deactivated and the LED on button
A will come on constantly. Press AFS button again to turn the adaptive lights on (LED off on the button).
In the event of a system failure, an indication is provided on the instrument panel by the flashing of warning light f or the symbol f appearing on the display along with a dedicated message (for versions/markets where provided).
L0E0055m fig. 65
KNOWING YOUR CAR 105
DST SYSTEM
(Dynamic Steering Torque)
This system is incorporated with the ESP control unit and suggests steering corrections whilst driving via the electric power steering. The system applies a torque to the steering wheel which increases the safety perception of the vehicle, maintaining control of the steering and making the intervention of the Advanced ESP system less intrusive.
IMPORTANT The function is activated about 5 seconds after the SPORT button is pressed.
IMPORTANT The steering may become stiffer during parking manoeuvres including a great deal of steering.
This is normal and caused by the system preventing the electric control motor overheating. No repairs are needed.
The power steering system will start working normally again the next time the car is used.
SPORT FUNCTION
(for versions/markets where provided)
The vehicle may be equipped with a system that allows a choice between two styles of driving, normal and sports.
Pressing the SPORT button fig. 66 produces sporty driving featuring higher acceleration response and more effort required on the steering wheel to produce this effect.
When the function is active, “S” is lit up in the instrument panel. Press the button again to turn the function off and restore the normal driving setting.
1
L0E0058m fig. 66
106 KNOWING YOUR CAR
On some versions, with the CITY function activated, the SPORT function is not available. To activate the SPORT function, deactivate the CITY function and vice versa, because they are reciprocally incompatible.
Under no circumstances should aftermarket operations be carried out involving steering system or steering column modifications
(e.g. installation of anti-theft device). This could negatively affect performance and safety, invalidate the warranty, cause serious safety problems and also result in vehicle non-compliance with type-approval requirements.
REACTIVE SUSPENSION
SYSTEM (active shock absorber system)
This system interacts with the Sport function (see “Sport function” paragraph).
The SPORT button, fig. 67, allows you to choose between two different driving settings depending on the route type and on the road surface:
– with the button released: “normal” mode
– with the button pressed: “SPORT” mode.
Before servicing the car, switch off the engine and remove the key from the ignition device to activate the steering lock. This is especially important when the car wheels are not touching the ground. If this is not possible (e.g. if the key must be kept in the MAR position or the engine must be kept running), remove the electric power steering system main fuse.
L0E0058m fig. 67
KNOWING YOUR CAR 107
In “normal” operating mode, active shock absorbers adjust car suspensions, adapting them to the type of road and to the driving stresses, improving driving comfort in particular on rough terrain.
In “SPORT” operating mode, the letter “S” is lit up on the instrument panel display. This function produces a sports driving setting featuring greater responsiveness during acceleration and a sports driving feeling with the steering, as well as the regulation and distribution of the damping at the shock absorbers guaranteeing greater vehicle precision and reaction, whilst maintaining a good level of comfort. The driver will notice that the vehicle is more precise when cornering and quicker in changing direction.
This function is particularly useful whenever maximum performance is required for a short time (e.g. when overtaking).
IMPORTANT During acceleration, when the SPORT function is used the steering may shudder which is typical of a sports setting.
IMPORTANT The function is activated about 5 seconds after the SPORT button is pressed.
System failure
In the event of a malfunction, the system notifies the driver of the fault via a dedicated message in the reconfigurable multifunction display instrument panel and the amber i symbol coming on. In this case, go to a Lancia
Dealership.
1
108 KNOWING YOUR CAR
DRIVING ADVISOR
(Lane crossing warning )
(for versions/markets, where provided)
The Driving Advisor is a warning system that notifies the driver if he/she crosses the lane because he/she has been distracted.
A video sensor, fitted on the windscreen near the interior rear view mirror, detects the lane demarcation lines and the position of the car in relation to them.
IMPORTANT If the windscreen needs replacing on cars fitted with a Driving Advisor system, it is advisable to go to a Lancia Dealership. If the repair is being carried out at a specialist window replacement centre, it is still necessary to go to a Lancia Dealership to have the TV camera calibrated.
OPERATION
The system is not active when the vehicle is started. It is only activated when button A-fig. 68 in the dashboard is pressed. The LED in the button lights up to confirm that the system has been switched on plus a dedicated warning message in the instrument panel display. Once it is turned on the system will recognise the operating conditions and this is signalled to the driver by the LED located in the button flashing and the symbol ing conditions, it becomes active. Therefore: the remains on constantly. e in the amber coloured panel in the instrument panel display flashing too. Once the system has recognised the operate icon in the display switches off and the LED on the button
IMPORTANT If the operating conditions are no longer present then the system will deactivate. This is signalled to the driver by the LED on the button flashing and the amber e icon on the display flashing.
KNOWING YOUR CAR 109
OPERATING CONDITIONS FOR ACTIVATION
Once switched on, the system becomes active only if the following conditions are present:
❍ always keep at least one hand on the steering wheel;
❍ vehicle speed between 65 km/h and 180 km/h;
❍ presence of lane demarcation lines not deteriorated and visible on both sides;
❍ suitable visibility conditions;
❍ straight line or wide radius bends;
❍ visual field condition sufficient (safe distance from vehicle in front).
ACTIVATING/DEACTIVATING THE SYSTEM
With the system on, if the vehicle approaches one of the lines defining the side of the lane, a torque is applied to the steering wheel to let the driver know which direction to steer in order to stay within the lane. If the driver turns on the direction indicator in order to change lanes or for overtaking, then the system will switch off momentarily.
If the driver wishes to change lanes without turning the direction indicator on, then there will be a warning from the steering wheel that they are about to cross the line.
If the driver continues with the manoeuvre to change lanes, the system will be temporarily deactivated and then switch back on again once it has recognised the new driving lane. This temporary deactivation will be signalled to the driver by the LED in the button flashing and by the e symbol in the amber coloured panel in the instrument panel display also flashing.
IMPORTANT The force applied to the steering wheel by the system is sufficient for the driver to notice it but they can easily override it and maintain control of the vehicle.
1
110 KNOWING YOUR CAR
DEACTIVATING THE SYSTEM
Manual mode
The system can be deactivated by pressing button
A-fig. 68 in the dashboard. Confirmation that the system has been switched off is given by the LED in the button and the message 1-fig. 69 in the instrument panel display going out.
Automatic mode
The system can be switched off in automatic mode (therefore it must be activated again to use it). The driver is advised that the system has been turned off automatically by three consecutive acoustic signals and the message
1 – fig. 69 in the instrument panel display after the following situations:
❍ the driver does not keep their hands on the steering wheel (indication 2-fig. 69 is shown on the instrument panel and a buzzer sounds until the driver places their hands back on the wheel. This is considered a dangerous condition and the system is automatically deactivated);
❍ intervention of the vehicle safety systems (ABS, ESP,
ASR, DST and TTC);
❍ the driver activates the sports driving setting pressing the SPORT button (for versions/markets where provided).
IMPORTANT The system cannot be activated if the driver has previously selected the sports driving mode. The impossibility of using the system will be communicated to the driver by three consecutive beeps and by the displayed message 1 in fig. 69.
KNOWING YOUR CAR 111
SYSTEM FAILURE
In the case of a malfunction, the system notifies the driver of the fault with message 3-fig. 69 in the instrument panel display plus a buzzer.
IMPORTANT NOTES
The driving advisor is not capable of operation following a malfunction of the following safety systems – ABS,
ESP, ASR, DST and TTC.
The operation of the driving advisor can be adversely affected by poor visibility conditions (fog, rain, snow), extreme light conditions (glare of the sun, darkness), lack of cleanliness or damage, even partial, to the windscreen in the area behind the TV camera.
The area of the windscreen by the TV camera must not be partly or totally obscured by objects (e.g. stickers, protective film, etc.).
1
The driving advisor is not an automatic driving system and does not replace the driver in controlling the trajectory of the vehicle.
The driver is personally responsible for maintaining a suitable level of attention to the traffic and road conditions and for controlling the trajectory of the vehicle safely.
When the lane demarcation lines are not sufficiently visible, covered or non-existent, the driving advisor cannot help the driver and the system will not be activated.
112 KNOWING YOUR CAR fig. 68
1 fig. 69
2 3
L0E1009g
L0E1010g
KNOWING YOUR CAR 113
TABLE SUMMARIZING SIGNALS DURING THE USE OF THE DRIVING ADVISOR
Status of the LED Message on the display on the button (fig. 68 and 69)
Status of icon on display
Acoustic signal
Off
On flashing
–
Driving Advisor on
– e flashing
–
–
On flashing
On constantly
On constantly
Off
Off
On constantly
Off
Off
–
–
Driving Advisor on
Driving Advisor off
Driving Advisor off
Keep your hands on the steering wheel
Driving Advisor not available see Handbook
Driving Advisor off e !
e flashing
–
–
–
– e
Constantly on
Constantly on
–
–
–
–
–
3 signals
Single prolonged warning
Single warning
3 signals
Meaning
System not activated
The system has been engaged and it is not activated
The system is searching for the operating conditions
The system is activated and the operating conditions have been recognised
The system has been engaged and is immediately activated
The system has been turned off manually
The system has been turned off automatically
The system warns the driver to place his/her hands on the steering wheel
The system is faulty: go to a Lancia Dealership
The system was not engaged due to the activation of sports driving mode
1
114 KNOWING YOUR CAR
ADVANCED ESP SYSTEM
(ELECTRONIC STABILITY PROGRAM)
This is an electronic car stability control system in the event of tyre grip loss, helping to maintain directional control.
The Advanced ESP system is therefore particularly useful when road surface grip conditions change.
With the Advanced ESP system as well as the ASR (traction control with intervention on the brakes and the engine) plus the HILL HOLDER (device for hill starts without using the brakes) and also MSR (adjustment of engine braking force with gear downshift), HBA (automatic increase in braking pressure during emergency braking),
ABS (preventing the wheels from locking and slipping on all road surfaces during sharp braking and DST (application of force on the steering wheel for steering correction) functions are all available.
SYSTEM INTERVENTION
It is signalled by the blinking of the warning light
á on the instrument panel, to inform the driver that the car is in critical stability and grip conditions.
Switching the system on
The Advanced ESP system comes on automatically when the vehicle is started and cannot be turned off.
Failure indications
In the event of a failure, the Advanced ESP system will be automatically switched off and warning light
á will appear constantly in the instrument panel along with a message on the reconfigurable multifunction display.
The LED on the ASR OFF button will also light up (see
“Instrument panel warning lights” chapter). In this case, go to a Lancia Dealership.
The performance of the Advanced ESP system should not encourage the driver to take unnecessary risks. Your driving style must always be suited to the road conditions, visibility and traffic. The driver is ultimately responsible for road safety.
KNOWING YOUR CAR 115
HILL HOLDER SYSTEM
This is an integral part of the Advanced ESP system and automatically cuts in in the following conditions:
❍ uphill: car at a standstill on a road with a gradient higher than 5%, engine running, clutch and brake pedal pressed, gearbox in neutral or engaged gear other than reverse.
❍ downhill: car at a standstill on a road with a gradient higher than 5%, engine running, clutch and brake pedal pressed and reverse gear engaged.
When setting off, the Advanced ESP system control unit will keep braking pressure on the wheels until reaching the required power for starting or, in any case, for a maximum of 2 seconds in order to move the right foot from the brake pedal to the accelerator pedal easily.
When two seconds have elapsed, without starting, the system is automatically deactivated, gradually releasing the braking pressure. During this release stage, the typical mechanical brake release noise can be heard, indicating that the car is about to move.
Failure indications
System failure is indicated by warning light
á lighting up in the instrument panel together with a dedicated message appearing in the reconfigurable multifunction display; see “Instrument panel warning lights” chapter.
IMPORTANT The Hill Holder system is not a parking brake; therefore, never leave the car without having engaged the handbrake, turned the engine off and engaged first gear.
The Advanced ESP system continues to operate if the space-saver wheel is fitted. Always remember that the space-saver wheel, being smaller than the original wheel provides less grip.
For the correct operation of the Advanced ESP and
ASR systems, the tyres must absolutely be the same make and type on all wheels, in perfect conditions and, above all, of the type, make and size specified.
1
116 KNOWING YOUR CAR
ASR SYSTEM (Antislip Regulation)
It is an integral part to the ESP system and automatically intervenes in the event of slip of one or both drive wheels, helping the driver to control the car. The action of the
ASR system is particularly helpful in the following circumstances:
❍ slipping of the inner wheel when cornering due to the effect of dynamic load changes or excessive acceleration;
❍ too much power transmitted to the wheels. also in relation to road surface conditions;
❍ acceleration on slippery, snowy or frozen road surfaces;
❍ in the event of loss of grip on a wet surface (aquaplaning).
MSR system (engine drive regulation)
The MSR system is an integral part of the ASR, that intervenes, if there is a sudden change to a lower gear, restoring torque to the engine, thereby preventing excessive drive at the drive wheels which, especially in poor grip conditions, could lead to a loss in stability of the vehicle.
KNOWING YOUR CAR 117
Switching the ASR system on/off fig. 73
The ASR system switches on automatically each time the engine is started. Whilst driving, the ASR can be switched off and subsequently switched on again by pressing the
ASR OFF button.
When the system is active, a message on the reconfigurable multifunction display is displayed.
When the system is deactivated, the LED on the ASR
OFF button turns on and a message appears in the reconfigurable multifunction display. When the ASR is switched off whilst driving, the next time the car is started up the ASR is automatically switched on by the system.
When travelling on snowy roads with snow chains, it may be helpful to turn the ASR off: in fact, in these conditions, the driving wheels skidding when moving off gives you better traction.
1 fig. 73
L0E0056m
118 KNOWING YOUR CAR
TTC system (Electronic self-locking differential)
THIS IS a system, which is an integral part of the ASR, that intervenes on entering bends giving drive torque to the outer wheel and braking the inner wheel.
In this way the effect of a self-locking differential is simulated, increasing the sportiness of the car and improving cornering.
ABS SYSTEM
This system, which is an integral part of the braking system, prevents one or more wheels from locking and slipping in all road surface conditions, irrespective of the intensity of the braking action, ensuring that the vehicle can be controlled even during emergency braking.
The EBD system (Electronic Braking Force Distribution) completes the system allowing the brake force to be distributed between the front and rear wheels.
IMPORTANT To get the maximum efficiency of the braking system, a bedding-in period of about 500 km is needed: during this period it is better to avoid sharp, repeated and prolonged braking.
KNOWING YOUR CAR
System intervention
The driver can tell the ABS system has come into action because the brake pedal pulsates slightly and the system gets noisier: it means that the vehicle speed should be altered to suit the type of road surface.
119
If the ABS system cuts in, it means that the grip between the tyre and the road surface is close to its limit: you must slow down to match the speed to the road grip available. The
ABS make the best use of the available grip but cannot increase it.
When the ABS cuts in and you feel the brake pedal pulsating, do not release the pressure, but keep it pressed; in doing so you will stop in the shortest amount of space possible depending on the current road conditions.
You should always drive carefully on slippery surfaces and avoid any unnecessary risks.
1
120 KNOWING YOUR CAR
FAILURE INDICATIONS
ABS failure
This is signalled by the
> warning light in the instrument panel coming on together with a message in the reconfigurable multifunction display. In this case, the braking system will still be effective, although without the extra capacity offered by the ABS system. Drive carefully to the nearest Lancia Dealership to have the system checked.
EBD failure
This is signalled by the
> and x warning lights on the instrument panel coming on, together with a message on the reconfigurable multifunction display. In this case, the rear wheels may suddenly lock and the vehicle may swerve when braking sharply. Drive very carefully to the nearest Lancia Dealership to have the system checked.
If only warning light x on the instrument panel comes on, with a message in the reconfigurable multifunction display, stop the car immediately and contact the nearest Lancia
Dealership. Leakage of hydraulic fluid from the braking system will compromise the operation of the braking system, whether it is of the conventional type or with ABS.
KNOWING YOUR CAR 121
START&STOP SYSTEM
(for versions/markets where provided)
The Start&Stop system automatically stops the engine each time the vehicle is stationary and starts it again when the driver wants to move off. In this way, the vehicle efficiency is increased, by reducing consumption, dangerous gas emissions and sound pollution.
The system is active every time the engine is started.
OPERATING MODES
Engine stopping mode
With the car stopped, the engine stops with gearbox in neutral and clutch pedal released.
NOTE The engine can only be stopped automatically over about 10 km/h, to prevent the engine from being repeatedly stopped when driving at walking pace.
Symbol
U fig. 74 appears on the display when the engine stops.
Engine restarting mode
To restart the engine, press the clutch pedal.
SYSTEM MANUAL ACTIVATION/DEACTIVATION
To activate/deactivate the system manually, press the button T fig. 75 on the dashboard control trim.
fig. 74
L0E1024g
1
L0E0207m fig. 75
122 KNOWING YOUR CAR
Start&Stop system activation
A message and a symbol will be displayed when the
Start&Stop system is on. In this condition, the LED
A-fig. 75 on the button T is off.
Turning the Start&Stop off
Versions with reconfigurable multifunction display: the
T symbol will appear on the display when the Start&Stop system is off.
When the system is deactivated, the LED A-fig. 75 is on.
ENGINE STOPPING FAILURE CONDITIONS
When the system is operating, due to comfort, emission control and safety reasons, the engine does not stop in some conditions, among which:
❍ engine still cold;
❍ especially cold outside temperature;
❍ battery not sufficiently charged;
❍ heated rear window activated;
❍ driver’s door not shut;
❍ driver’s seat belt not fastened;
❍ reverse gear engaged (for example, during parking manoeuvres);
❍ for versions equipped with dual zone automatic climate control (for versions/markets, where provided), if an adequate level of thermal comfort has not been reached or MAX-DEF function activation;
❍ during the first period of use, to initialise the system.
In these cases, the display shows a message and – for those versions/markets where provide – the symbol U on the instrument panel display flashes.
If the climate comfort is to be favoured, the
Start&Stop system can be deactivated, for a continuous operation of the climate control system.
KNOWING YOUR CAR 123
ENGINE RESTARTING CONDITIONS
For reasons of comfort, limiting harmful emissions and safety purposes, the power unit can restart automatically without any action on behalf of the driver if certain conditions are met, including:
❍ battery not sufficiently charged;
❍ reduced braking system pressure, e.g. following the brake pedal being pressed repeatedly;
❍ car moving (e.g. when driving on roads with a gradient);
❍ engine stopping by Start&Stop system for over 3 minutes;
❍ for versions equipped with dual zone automatic climate control (for versions/markets where provided), to enable suitable thermal comfort or MAX-DEF function activation.
With gear engaged, automatic engine restarting is possible only by fully pressing the clutch pedal.
The driver is informed by the displaying of a message and
– for versions/markets where provided – by the flashing of the symbol U .
Notes
If the clutch is not pressed, after 3 minutes from the engine stopping, the engine can be restarted only using the ignition key.
In cases when the engine stops and this is not desired, due for example to the clutch pedal being released sharply with a gear engaged, if the Start&Stop system is activated, the engine can be restarted by fully depressing the clutch pedal or by placing the gear lever in neutral
SAFETY FUNCTIONS
When the engine is stopped by the Start&Stop system, if the driver releases his/her seat belt and opens the driver’s or passenger’s door, the engine can be restarted only using the ignition key.
The driver is informed by a buzzer and by the flashing of the symbol U on the display; on some versions, a message is displayed as well.
1
124 KNOWING YOUR CAR
ENERGY SAVING FUNCTION
(for versions/markets where provided)
If, as a result of the automatic engine restarting, the driver does not carry out any action on the vehicle for over
3 minutes, the Start&Stop system stops the engine once and for all, to prevent fuel consumption. In these cases, the engine can be restarted only by using the ignition key.
NOTE In any case, it is possible to keep the engine running by deactivating the Start&Stop system.
OPERATING IRREGULARITIES
In the event of malfunction, the Start&Stop system is deactivated. The driver is informed about the failure through the switching-on of the symbol U on the instrument panel and – for some versions – through the displaying of a message. In this case, go to a Lancia
Dealership.
CAR INACTIVITY
In cases of car inactivity, special attention must be paid due to the disconnection of the battery power supply.
Proceed as follows: detach the connector A-fig. 76 (by pressing button B) from sensor C for monitoring the status of the battery installed on the negative battery pole
D. This sensor should never be disconnected from the pole except if the battery is replaced.
When replacing the battery, always contact a Lancia Dealership. Replace the battery using a new one of the same type (HEAVY
DUTY) and with the same specifications.
L0E0191m fig. 76
KNOWING YOUR CAR
EMERGENCY STARTING
When jump starting, never connect the negative lead (−) of the auxiliary battery to the negative pole A-fig. 77 of the car battery, but rather to an engine/gearbox earth point.
125
Before opening the bonnet, make sure the engine is off and the ignition key is in the
STOP position. Follow the instructions on the dedicated label on the front crossmember (fig. 78).
It is advisable to extract the key when there are other people in the vehicle. Exit from the vehicle only after having removed the ignition key or having rotated it to the STOP position. During refuelling, make sure the vehicle has been stopped and the key is in STOP position.
1 fig. 77
L0E0190m fig. 78
L0E0195m
126 KNOWING YOUR CAR
EOBD SYSTEM
The EOBD system (European On Board Diagnosis) carries out a continuous diagnosis of the components of the car related to emissions. It also alerts the driver, by turning on the U warning light in the instrument panel together with a message in the reconfigurable multifunction display, when these components are no longer in peak condition (see “Instrument panel warning lights” paragraph).
The goal of the system is to:
❍ to keep system efficiency under control;
❍ to signal a fault which causes emission levels to increase;
❍ to signal the need to replace deteriorated components.
The system also has a diagnosis connector that can be interfaced to suitable instruments, to read the error codes stored in the control unit together with a series of specific parameters for engine operation and diagnosis.
This check can also be carried out by traffic control authorities.
IMPORTANT After eliminating the problem, to check the system completely, Lancia Dealerships run a bench test and, if necessary, road tests which may also call for a long journey.
Go to a Lancia Dealership as soon as possible if warning light U either does not light up when the key is turned to MAR or if, while travelling, the warning light comes on either steadily or flashing (along with a message in the reconfigurable multifunction display). The operation of the warning light U may be checked by the traffic control authorities using specific devices.
Always comply with the traffic regulations in force in the country where you are driving.
KNOWING YOUR CAR 127
“DUALDRIVE” ELECTRIC POWER
STEERING SYSTEM
THIS is an electrically controlled power steering system called “Dualdrive”. It is only operational with the ignition key turned to MAR and the engine running; it can be customised by the driver according to the driving conditions.
IMPORTANT When turning the ignition key quickly, complete power steering functionality may be achieved after 1-2 seconds.
CITY FUNCTION ACTIVATION/DEACTIVATION
Press button A-fig.79 to activate/deactivate the function.
When the function is active, the CITY warning light on the instrument panel turns on. When the CITY function is on, the effort required at steering wheel is lighter, making parking easier: therefore, this function is particularly useful for driving in city centres.
1 fig. 79
L0E0057m
128 KNOWING YOUR CAR
On some versions, with the CITY function activated, the SPORT function is not available. To activate the SPORT function, deactivate the CITY function and vice versa, because they are reciprocally incompatible.
Under no circumstances should aftermarket operations be carried out involving steering system or steering column modifications
(e.g. installation of anti-theft device). This could negatively affect performance and safety, invalidate the warranty, cause serious safety problems and also result in non-compliance of the car with type-approval requirements.
FAILURE INDICATIONS
Any failure of the electric power steering is indicated by instrument panel warning light g coming on together with a message in the reconfigurable multifunction display. In the event of electric power steering system failure, the car can be driven with mechanical steering.
IMPORTANT In some circumstances, factors independent of the electric power steering could cause the warning light g on the instrument panel to come on. In this case, stop the car immediately, switch off the engine for about
20 seconds and then restart the engine. If the g warning light remains on, together with the message on the reconfigurable multifunction display, contact a Lancia
Dealership as soon as possible.
KNOWING YOUR CAR 129
IMPORTANT The steering may become slightly stiff following parking manoeuvres involving a lot of steering.
This is normal and is caused by a system to prevent the motor from overheating. No servicing is required. The power steering system will start working normally again the next time the car is used.
Before starting any servicing operation, stop the engine and remove the key from the ignition switch to operate the steering lock, particularly when the wheels do not touch the ground.
If this is not possible (e.g. if the key must be kept in the MAR position or the engine must be kept running), remove the electric power steering system main fuse.
T.P.M.S. SYSTEM
(Tyre Pressure Monitoring System)
(for versions/markets, where provided)
The car may be equipped with a tyre pressure monitoring system. This system comprises a radio frequency transmitter fitted to each wheel (on the wheel rim inside the tyre), which is able to send information on the tyre inflation pressure of each wheel to the control unit.
IMPORTANT NOTES ABOUT THE TPMS SYSTEM
The fault indications are not stored and will therefore not be displayed after the engine has been switched off and then on again. If the fault conditions persist, the control unit will send the relative indications to the instrument panel only after the vehicle has been in motion for a short time.
1
130 KNOWING YOUR CAR
The TPMS is not able to warn you of sudden tyre pressure losses (for example when a tyre bursts). In this case stop the car, braking with care and avoiding sharp steering actions.
The T.P.M.S. requires the use of specific equipment. Contact a Lancia Dealership to find out which accessories are compatible with the system (wheels, hub caps etc.). The use of other accessories may affect the normal operation of the system.
Replacing the normal tyres with winter tyres and vice versa requires the inspection of the
T.P.M.S., which should only be carried out by a Lancia Dealership.
Tyre inflation pressure may vary according to outdoor temperature. The TPMS system may temporarily indicate insufficient pressure. In this case, check the tyre pressures with the tyres cold and, if necessary, pump them up.
KNOWING YOUR CAR
If the vehicle is fitted with TPMS, when a tyre is removed, it is advisable to replace the rubber gasket for the valve. Contact a Lancia Dealership.
131
Particularly strong radiofrequency interference may cause the T.P.M.S. to function incorrectly. This condition is indicated to the driver by a warning light n or symbol lighting up on the display together with a dedicated message.
The message will disappear automatically as soon as the interference ceases to disturb the system.
If the vehicle is fitted with a T.P.M.S., tyre and wheel fitting/removal operations require specific precautions. To avoid damaging or fitting the sensors incorrectly, tyre and wheel fitting/removal operations should only be carried out by specialists. Contact a Lancia Dealership.
1
132 KNOWING YOUR CAR
In order to use the system properly, refer to the following table when you have to change wheels/tyres:
Operation Sensor Fault indication Lancia Authorized
Services intervention
–
Replacing a wheel with the spare wheel
Replacing the wheels with winter tyres
Replacing the wheels with winter tyres
Replacing wheels with others of a different size (*)
Switching wheels
(front/rear) (**)
–
NO
NO
YES
YES
YES
YES
YES
YES
NO
NO
NO
Contact a Lancia Dealership
Repair the damaged wheel
Contact a Lancia Dealership
–
Contact a Lancia Dealership
–
(*) Given as an alternative in the Owner Handbook and available at Lineaccessori Lancia.
(**) Not cross-swapped (tyres must stay on the same side).
KNOWING YOUR CAR 133
PARKING SENSORS
(for versions/markets where provided)
The parking sensors are located on the rear bumper fig.
80 and their function is to inform the driver, through an intermittent beeping, of the presence of obstacles behind the car.
ACTIVATION/DEACTIVATION
The sensors are automatically activated when the reverse gear is engaged. As the obstacle behind the vehicle gets closer to the car, the buzzer becomes more frequent.
BUZZER WARNING
When reverse gear is engaged and there is an obstacle behind the car a buzzer is activated and the signal varies as the distance of the obstacle from the bumper varies.
The beep frequency:
❍ increases as the distance between the car and the obstacle decreases;
❍ becomes continuous when the distance between the car and the obstacle is less than around 30 cm and stops immediately if the distance increases;
❍ is constant if the distance is unchanged.
Detection distances
Centre operating radius 140 cm
Side operating radius 60 cm
If several obstacles are detected by the sensors, only the nearest one is considered.
1
L0E0059m fig. 80
134 KNOWING YOUR CAR
FAILURE INDICATIONS
Any faults in the parking sensor system are indicated, when reverse gear is engaged, by the
è warning light on the instrument panel lighting up and a dedicated message appearing in the multifunction display.
OPERATION WITH TRAILER
Sensor operation is automatically deactivated when the trailer’s electric cable plug is fitted in the car’s tow hook socket.
The sensors are automatically reactivated when the trailer’s cable plug is removed.
GENERAL WARNINGS
❍ When parking, watch out for obstacles that may be above or under the sensors.
❍ Sometimes, objects placed close to the car are not detected and could therefore cause damage to the car or be damaged themselves.
The following conditions may influence the performance of the parking sensor system:
❍ Reduced sensor sensitivity and a reduction in the parking assistance system performance could be due to the presence on the surface of the sensor of: ice, snow, mud, thick paint.
❍ The sensor may detect a non-existent obstacle (echo interference) due to mechanical interferences, for example when washing the vehicle, rain (strong wind), hail.
For correct operation, sensors must always be clean from mud, dirt, snow or ice. Be careful not to scratch or damage the sensors while cleaning them. Avoid using dry, rough or hard cloths. The sensors should be washed using clean water with the addition of car shampoo if necessary. When using special washing equipment such as high pressure jets or steam cleaning, clean the sensors very quickly keeping the jet more than
10 cm away.
KNOWING YOUR CAR
❍ The indications sent by the sensor can also be altered by the presence of ultrasonic devices (e.g. pneumatic brake systems or pneumatic drills) near the car.
❍ Parking sensor system performance can also be influenced by the position of the sensors, for example due to a change in the ride setting (caused by wear to the shock absorbers, suspension), or by overloading the vehicle and carrying out specific tuning operations that require the vehicle to be lowered.
135
Parking manoeuvres however are always the driver’s responsibility. While manoeuvring, always make sure that no-one is in the area concerned (especially children) or animals. The parking sensors are designed to assist drivers: in any case, you must always pay the utmost attention during potentially dangerous manoeuvres, even when carried out at low speed.
1
136 KNOWING YOUR CAR
MAGIC PARKING
(for versions/markets where it provided)
The Magic Parking system notifies the driver of a free parallel parking space that is a suitable length for the vehicle; it helps the driver when manoeuvring by automatically managing the movement of the steering wheel.
During the manoeuvre the driver is also assisted by information from the parking sensors (4 front and 4 rear) which provide further distance information when approaching obstacles in front of and behind the vehicle.
When looking for a parking space it is helpful if the front and rear sensors are not activated, whilst during the manoeuvre, the front and rear sensors will be automatically activated when reverse gear is engaged.
The ultimate responsibility when parking, however, always rests with the driver. During the entire manoeuvre it it always necessary to make sure that there are no people or animals in the space.
Parking sensors are a driving aid for the driver, who should continuously pay attention to all potentially dangerous manoeuvres, even at low speed: the Magic Parking system
DOES NOT adjust the vehicle speed in manoeuvres; the control of the acceleration speed and braking remain the responsibility of the driver.
KNOWING YOUR CAR 137
SENSORS
While searching for a parking place, the system uses side sensors (see fig. 81).
These sensors are automatically activated below around
30 km/h; during this stage if the driver has just passed a space that might be useful for a manoeuvre, the function can be requested using the special button; at this point the instructions for carrying out the manoeuvre will be shown on the display. If the function is not requested by the driver using the special button, no information will be displayed on the instrument panel.
OPERATION
The assisted parking manoeuvre can only be activated with the instrument panel on and at speeds below about
30 km/h and is divided into the following stages:
❍ Activation : pressing the button fig. 82 activates the search stage.
❍
Search : through side sensors, the system continuously searches for a free parking space, suitable to the vehicle dimensions. The driver determines on which side of the road they intend to park using the direction indicators (if no information is available from the direction indicators or hazard warning lights, the search takes place on the passenger side).
IMPORTANT The SEARCH stage in the system logic is deactivated after about 10 mins if a suitable parking space is not identified.
1
L0E0241m fig. 81
L0E0296m fig. 82
138 KNOWING YOUR CAR
❍ Identification : if the system identifies a free parking space that is a suitable size for the vehicle, it signals its presence and indicates the actions required for starting the manoeuvre.
❍ Manoeuvre : the driver is asked to engage reverse gear and release the steering wheel and manage the accelerator, brake and clutch (in the case of manual gearbox) or accelerator and brake (in the case of automatic gearbox).
During the reverse parking manoeuvre, the system manages the steering wheel automatically.
It suggests that the manoeuvre be concluded in reverse gear (if the conditions permit) when the continuous sound of the buzzer for the rear sensors is heard.
IMPORTANT The MANOEUVRE stage in the system logic is deactivated after about 3 mins if the parking manoeuvre has not been completed.
❍
Manoeuvre end : if the parking space is sufficient, the parking manoeuvre is completed by the system is a single movement; the further intervention of the driver is not required to position the vehicle. If further corrective manoeuvres are required, the system gives back control to the driver who must complete parking manually.
IMPORTANT Steering will be realigned after reversing when reverse gear is disengaged. The driver must complete the manoeuvre manually.
The operation of the parking assistance is based on different components:
❍ front and rear parking sensors;
❍ side sensors;
❍ steering;
❍ wheels and braking system;
❍ instrument panel.
It is necessary to bear in mind that a malfunction in one of these systems could compromise the operation of the Magic Parking system.
KNOWING YOUR CAR 139
DESCRIPTION OF MANOEUVRING STAGES
Activation
The system is activated by pressing the button fig. 82 and, as soon as it is activated, the system starts the search stage. The LED in the button coming on indicates that the system is activated. Since the system recognises parking spaces even when it is deactivated, the system can be activated straight away after having driven past an adjacent parking space that is deemed suitable. If the system has effectively identified a parking space, the search stage will not be performed and the system will notify the driver of the operations required to carry out the manoeuvre.
Search for a parking place
During the search stage fig. 83 the vehicle should continue following its route at a speed of below around 30 km/h and at a distance of around 50 cm to 130 cm from parked cars. A parking space is considered suitable if it is about
130 cm longer than the dimensions of the vehicle.
There are two possible types of parking:
❍ parking space longer than 160 cm compared to the vehicle dimensions: parking in a single manoeuvre
1
L0E1015g fig. 83
140 KNOWING YOUR CAR
❍ parking space longer than 130 cm compared to the vehicle dimensions: parking in more than one manoeuvre, where only the first one can be carried out by automatic steering management (the subsequent manoeuvres are entirely the responsibility of the driver).
To select the search and manoeuvring side, the driver must:
1) D Choose to carry out the search for the space and the manoeuvre on the passenger side with:
❍ the direction indicator in the middle position;
❍ the hazard warning lights on;
❍ the hazard warning lights on and the direction indicator in the passenger side position;
❍ the direction indicator pointing towards the passenger side.
2) F Choose to carry out the search for the space and the manoeuvre on the driver’s side with:
❍ the direction indicator in the driver’s side position;
❍ the hazard warning lights on and the direction indicator in the driver side position;
The system will notify the driver, on the side in which the search and the manoeuvre are taking place by means of dedicated messages in the instrument panel display and the symbol ( F and D ) different on the right and left sides.
The search will, however, take place on both sides, therefore it is possible to make the selection using the direction indicators even when having just driven past a parking space that is deemed suitable.
During the search step, speed should not exceed 30 km/h; when 25 km/h have been reached, the driver is asked to decrease the speed; if the speed of 30 km/h is exceeded, the system is disabled; in this case, the system must be restarted by pressing the button A-fig. 82.
If the Lane crossing function is activated (see “Exterior lights” paragraph) the search for the parking space always takes place on the passenger side.
If the parking sensors are activated during the search for a parking space (see “Front and rear parking sensors” paragraph), the operation of the Magic Parking system is deactivated.
The search for the parking space and the parking manoeuvres must be made in compliance with the regulations in force of the
Highway Code.
KNOWING YOUR CAR 141
Identifying a parking space fig. 84
If the system identifies a suitable parking space between two stationary vehicles or between other obstacles (e.g.
objects with an extensive side surface such as vehicles, boxes, etc.) it will signal that it has found a parking space that can be entered. If the position reached is already suitable at the beginning of the manoeuvre, the system will advise the driver to engage reverse gear, otherwise it will request moving further forward.
On the request to engage reverse gear the driver should stop the vehicle and engage reverse in order to confirm the wish to start the manoeuvre; if the driver continues driving, after about 10 metres the system will no longer consider the parking space identified and will start the search for new suitable space.
Manoeuvre
The driver will have control over the movements of the vehicle using the accelerator, brake and clutch (only on versions with manual gearbox) whilst the system will automatically manage the steering to enter the parking space identified in the best possible way.
During the manoeuvre it will be possible to take advantage of the information coming from the parking sensors
(when reversing it is advisable to reach the area where the rear sensors provide a continuous tone signal), but it is always advisable to keep an eye on the surrounding area.
The vehicle can be stopped during the manoeuvre and, whilst remaining stationary, reverse gear can temporarily be released (for example, to allow a pedestrian to go by in the area of the manoeuvre).
The speed should be less than about 7 km/h during the manoeuvre, otherwise the parking manoeuvre will be interrupted.
1
L0E1016g fig. 84
142 KNOWING YOUR CAR
If the driver carries out a voluntary or involuntary action on the steering during the parking manoeuvre (touching it or preventing its movement), the manoeuvre will be interrupted.
If the road surface is very uneven or there are obstacles under the wheels affecting the movement of the vehicle, preventing it from continuing along the correct trajectory, the manoeuvre may be interrupted.
Manoeuvre end
If the size of parking space permits, the parking manoeuvre may be performed in one go; when reverse gear is released the wheels will be realigned and the manoeuvre will be considered completed; the system will consequently be deactivated. If the size of the parking space is smaller, it may take several manoeuvres, the driver will be advised to complete the parking manoeuvre manually via a dedicated messages in the instrument panel display.
If you wish to stop the steering wheel with your hands during a manoeuvre, it is advisable to handle it firmly on the outer rim. Do not try and keep your hands on the inside or hold the spokes.
General warnings
❍
The ultimate responsibility when parking, however, always rests with the driver. During these manoeuvres, always make sure that no people, animals or objects are within the manoeuvring area. The Magic Parking system (like parking sensors) is designed to assist drivers: in all cases, you must always pay the utmost attention during potentially dangerous manoeuvres, even when these are carried out a low speed:
❍ If the sensors undergo shocks influencing their position, the system operation could be strongly degraded.
❍ If the sensors are dirty, covered by snow, ice or mud or are repainted compared to the original conditions, the system operation could be strongly degraded.
❍ It is extremely important, for the correct operation of the system, that the sensors are always kept clean. During cleaning make sure not to scratch or damage them; avoid using dry or rough cloths. The sensors should be washed using clean water with the addition of car shampoo if necessary. When using special washing equipment such as high pressure jets or steam cleaning, clean the sensors very quickly keeping the jet more than 10 cm away.
KNOWING YOUR CAR 143
❍ Ultrasound source (e.g. pneumatic brakes of trucks or air drills) nearby could negatively influence the sensor performance.
❍ Sensors may detect a non-existent obstacle (echo interference) due to mechanical interference, for example while washing the car, rain, strong wind, hail.
❍ The sensors might not detect objects of a particular shape or made from particular materials (very thin poles, trailer beams, panels, nets, bushes, parking deterrents, rubbish bins, motor vehicles, etc.). Always take great care to check that the vehicle and its path are effectively compatible with the parking area identified by the system.
❍ The use of (one or more) tyres or wheels of a different size to those present when the vehicle was purchased could affect the operation of the system.
❍
If the battery is disconnected or very run down, before the Magic Parking system is available it is necessary to drive a few hundred metres, not in a straight line, to initialise the system.
❍ If a trailer is fitted (with the plug correctly inserted) the Magic Parking system will automatically be disabled.
❍
If the Magic Parking system is in “search in progress” mode, the system could incorrectly identify a parking space and carry out the manoeuvre (e.g. by a junction, carriage track, roads crossing the direction of travel, etc.).
❍
In the case of parking manoeuvres on roads on a gradient, the performance of the system could be inferior and it may deactivate.
❍
If a parking manoeuvre is being carried out between two vehicles parked on the pavement, the Magic Parking system may cause the vehicle to mount the pavement.
❍
Some manoeuvres at very tight bends may not be carried out.
❍ Take great care to ensure that conditions do not change during the parking manoeuvre (e.g. if there are persons and/or animals in the parking area, moving vehicles, etc.) and intervene immediately if necessary.
❍ During parking manoeuvres, pay special attention to vehicles approaching from the opposite direction. Always follow the Highway Code.
1
144 KNOWING YOUR CAR
SYSTEM MESSAGES ON THE INSTRUMENT PANEL
The Magic Parking system is searching for a suitable parking space.
The Magic Parking system is searching for a suitable parking space.
The Magic Parking system is searching for a suitable parking space.
A suitable parking space has been identified and the position is correct for starting the parking manoeuvre. It is necessary to stop and engage reverse gear.
Release reverse gear
When the Magic Parking activation button is pressed, reverse gear must be released for the system to be switched on.
Do not touch the steering wheel!
The manoeuvre is about to commence, the driver is invited to let go of the steering wheel.
Do not touch the steering wheel!
Carry out the manoeuvre
The manoeuvre has started, the driver can accelerate and release the clutch (in the case of a manual gearbox) to enter the parking space; the
Magic Parking system will manage the steering automatically.
Speed too high The speed of the vehicle is about to exceed the maximum speed permitted by the system (the message will be displayed at about 25 km/h for the search stage), if the driver increases the speed further, the system will automatically be deactivated.
IMPORTANT Some text messages displayed by the instrument panel are accompanied by acoustic warnings.
KNOWING YOUR CAR 145
Magic Parking not available
A problem has been detected in the
Magic Parking system. Go to an authorised service centre.
Try again later The Magic Parking system has detected a problem in one of the systems required for its operation. If the problem persists, go to an authorised service centre.
Action on the steering wheel
The driver voluntarily or involuntarily grasped the steering wheel.
The system is disabled and the manoeuvre is controlled by the driver again.
Magic Parking
OFF
The Magic Parking system is deactivated for one of the following conditions: manoeuvre concluded, speed limits exceeded, presence of a trailer, search stage too long, manoeuvre stage too long, use of parking sensors requested during the search stage, incorrect vehicle trajectory as a result of obstacles at the wheels.
End Manually ❍ The stage managed by the Magic
Parking is over, but the parking manoeuvre still needs to be completed by the driver.
❍ The steering wheel has been grasped during the manoeuvre.
❍ The reverse has been disengaged during the manoeuvre and the vehicles has moved off.
❍ Due to obstacles to the wheel movement, the path followed by the vehicle is different from the one required for the parking.
Presence of a Trailer
Magic Parking off
The activation of the Magic Parking system was requested, but there is a trailer present (the trailer plug is correctly inserted).
The Magic Parking system has been switched off following a request to activate the parking sensors during the search stage with the vehicle speed below 15 km/h.
1
IMPORTANT Some text messages displayed by the instrument panel are accompanied by acoustic warnings.
146 KNOWING YOUR CAR
FRONT AND REAR PARKING SENSORS
(combined with Magic Parking)
( for versions/markets where provided)
The parking sensors provide the driver with distance information when approaching obstacles in front of and behind the vehicle (versions with 4 front and 4 rear sensors) always combined with the Magic Parking function. The system therefore provides a further aid during parking manoeuvres because it allows the identification of obstacles outside of the driver’s field of vision.
The driver is notified of the presence and distance of the obstacle from the vehicle by an acoustic signal which varies depending on the distance from the obstacle (as the distance from the obstacle decreases the frequency of the acoustic signal increases).
SENSORS
In order to measure the distance of obstacles, the system uses 4 sensors located in the front bumper (where provided) fig. 85 and 4 sensors located in the rear bumper fig. 86.
fig. 85
L0E0059m fig. 86
L0E0298m
KNOWING YOUR CAR 147
Version with 8 sensors
On the version with 4 front sensors and 4 rear sensors, the system is activated when reverse gear is engaged or by pressing the button fig. 87. If there has been a request to activate the Magic Parking function, the front and rear sensors are not automatically activated during the search for a parking space, but can be activated by pressing the special button (fig. 87) or by engaging reverse gear when the speed is below around 15 km/h.
When reverse gear is released, the front and rear sensors remain activated until a speed of around 15 km/h is exceeded to allow the parking manoeuvre to be completed.
The system can also be activated by pressing the button fig. 87 in the central panel: a warning light in the button comes on when the system is activated.
The sensors are deactivated by pressing the button again fig. 87 or when a speed of 15 km/h is exceeded: the warning light in the button is off when the system is not active.
When the sensors are activated, the system starts to produce acoustic signals from the front or rear buzzers as soon as an obstacle is detected with the frequency increasing as the obstacle gets closer.
When the obstacle is less than about 30 cm away, the sound becomes continuous. Depending on the position of the obstacle (in front or behind) the sound is produced by the corresponding buzzers (front or rear). The obstacle closest to the vehicle is signalled.
The acoustic signal stops immediately if the distance of the obstacle increases. The sound cycle remains constant if the distance measured by the centre sensors remains unchanged, whilst if this situation occurs for the side sensors, the signal is interrupted after about 3 seconds (for example, to prevent signals in the case of manoeuvres alongside walls).
The responsibility for parking and other dangerous manoeuvres always and in every case lies with the driver. While manoeuvring, always make sure that no-one is in the area concerned (especially children) or animals. The parking sensors are designed to assist drivers: in any case, you must always pay the utmost attention during potentially dangerous manoeuvres, even when carried out at low speed.
L0E0249m fig. 87
1
148 KNOWING YOUR CAR
ACOUSTIC SIGNAL
The information concerning the presence and distance of an obstacle from the vehicle is transmitted by means of acoustic signals from 2 buzzers installed in the passenger compartment:
❍ a front buzzer warns of the presence of obstacles at the front and a buzzer located at the rear warns of the presence of obstacles at the rear. This notifies the driver of the direction (front/rear) of the obstacles.
Operation is automatically activated when reverse gear is engaged.
The acoustic signal:
❍ increases as the distance between the car and the obstacle decreases;
❍ becomes continuous when the distance between the car and the obstacle is less than around 30 cm and stops immediately if the distance increases;
❍ is constant if the distance is unvaried; if this situation occurs for the side sensors, the indication will stop after about 3 seconds to avoid, for example, warning indications in the event of manoeuvres alongside walls.
The sensor must be clean of mud, dirt, snow or ice in order for the system to operate correctly. Be careful not to scratch or damage the sensors while cleaning them. Avoid using dry, rough or hard cloths. The sensors should be washed using clean water with the addition of car shampoo if necessary. When using special washing equipment such as high pressure jets or steam cleaning, clean the sensors very quickly keeping the jet more than
10 cm away.
Only have the bumpers repainted or any retouches to the paintwork in the area of the sensors carried out by a Lancia Dealership.
If the paint is incorrectly applied this could adversely affect the operation of the parking sensors.
SENSOR OPERATING RANGE
The sensors allow the system to check the front part (version with 8 sensors) and rear part of the vehicle.
Their position covers the middle and side areas of the front and rear of the vehicle. If an obstacle is located in a middle area, it is detected when the distance is less than about 0.9 m (front) and 1.30 m (rear).
If the obstacle is located at the side, it is detected at distances of less than 0.6 m.
KNOWING YOUR CAR 149
OPERATION WITH TRAILER
The operation of the sensors is automatically deactivated when the trailer’s electric plug is inserted in the car’s tow hook socket. The sensors are automatically enabled again when the trailer’s cable plug is removed.
IMPORTANT If you wish to leave the tow hook fitted when there is no trailer, it is advisable to go to a Lancia Dealership to have the system updated because the tow hook could be detected as an obstacle by the centre sensors.
FAILURE INDICATIONS
Either symbol S (if the Magic Parking system is fitted), or symbol t (if the Magic Parking is not fitted) will light up on the display in combination with a message or with instrument panel warning light è if parking sensor faults are detected while reverse is engaged.
GENERAL WARNINGS
During parking manoeuvres, pay the utmost attention to any obstacles that could be located above or below the sensors.
Under certain circumstances close objects located in front of or behind the vehicle may not be detected and could therefore cause damage to the vehicle or be damaged themselves.
The following conditions may influence the performance of the parking sensor system:
❍ Reduced sensor sensitivity and a reduction in the parking assistance system performance could be due to the presence on the surface of the sensors of: ice, snow, mud, thick paint.
❍ The sensors detect a non-existent obstacle (echo interference) due to mechanical interference, for example when washing the vehicle, rain (strong wind), hail.
❍ The indications sent by the sensors can also be altered by the presence of ultrasonic devices (e.g. pneumatic brake systems or pneumatic drills) near the car.
❍
The performance of the parking assistance system may also be affected by the position of the sensors. For example, if the geometry is altered (as a result of wear of the shock absorbers, suspension) or the tyres are changed, the vehicle is too heavily laden, specific tuning is carried out that lowers the vehicle.
❍ The detection of obstacles to the upper part of the vehicle is not guaranteed as the system is designed to detect obstacles that could impact the lower part of the vehicle.
1
150 KNOWING YOUR CAR
RADIO WIRING SYSTEM
( for versions/markets where provided)
If no car radio was requested at the time of purchase, the vehicle is provided with a compartment on the dashboard fig. 87a.
The radio set-up is composed of:
❍ car radio power supply cables, front and rear loudspeakers and an aerial;
❍ radio compartment;
❍ aerial on the roof.
Fit the car radio in the compartment A-fig. 87a which can be reached by pressing the two tabs B located in the compartment itself: the power wires are located in the compartment.
When connecting a car radio to the radio wiring contact Lancia Dealership to prevent any faults from occurring that might compromise the safety of your car.
fig. 87a L0E0286m
KNOWING YOUR CAR 151
ELECTRICAL/ELECTRONIC
DEVICE INSTALLATION
The electric/electronic devices installed subsequent to the purchase of the car and included in the after-sales service must be marked:
FIAT S.p.A. authorises the installation of transceiver devices on condition that such installations are carried out in a workmanlike fashion, following the manufacturer’s instructions, at a specialised centre.
IMPORTANT Traffic authorities may not allow the vehicle on the road if devices are fitted that modify vehicle specifications. This may also invalidate the warranty in relation to faults caused by the change or either directly or indirectly related to it. FIAT S.p.A. shall not be liable for damage caused by the installation of accessories either not supplied or recommended by FIAT S.p.A. and/or not installed in compliance with the provided instructions.
RADIO TRANSMITTERS AND CELLULAR PHONES
Radio transmitter equipment (vehicle mobile phones, CB radios, amateur radio etc.) cannot be used inside the car unless a separate aerial is mounted on the roof.
IMPORTANT The use of such devices inside the passenger compartment (without a separate aerial), may cause the car’s electronic systems to malfunction. This could compromise safety in addition to constituting a potential hazard for passengers.
In addition, transmission and reception of these devices may be affected by the shielding effect of the vehicle body. As far as the use of EC-approved mobile phones is concerned (GSM, GPRS, UMTS), follow the instructions for use provided by the mobile phone manufacturer.
1
152 KNOWING YOUR CAR
REFUELLING THE CAR
PETROL ENGINES
Use unleaded petrol only, with an octane number (R.O.N.) not lower than 95.
IMPORTANT An inefficient catalytic converter leads to harmful exhaust emissions, thus contributing to air pollution.
IMPORTANT Never use leaded petrol, even in small amounts or in an emergency, as this would damage the catalytic converter beyond repair.
DIESEL ENGINES
Operation at low temperatures
If the outside temperature is very low, diesel thickens due to the formation of paraffin clots with consequent defective operation of the fuel supply system.
In order to avoid these problems, different types of diesel are distributed according to the season: summer type, winter type and arctic type (cold/mountain areas). If refuelling with diesel fuel whose specifications are not suitable for the current temperature, it is advisable to mix
TUTELA DIESEL ART additive in the proportions shown on the container with the fuel. Pour the additive into the tank before the diesel fuel.
When using or parking the vehicle for a long time in the mountains or cold areas, it is advisable to refuel using locally available diesel fuel.
In this case, it is also advisable to keep the tank over 50% full.
For diesel engines, use only diesel fuel for motor vehicles in accordance with EN590
European specifications. The use of other products or mixtures may damage the engine beyond repair and consequently invalidate the warranty, due to the damage caused. If you accidentally introduce other types of fuel into the tank, do not start the engine and empty the tank. If the engine has run, even for a very short time, you will need to have the entire fuel system emptied in addition to the tank.
REFUELLING CAPACITY
To fill the tank completely, top-up twice after the first click of the fuel delivery gun. Further top ups could cause faults in the fuel supply system.
KNOWING YOUR CAR 153
FUEL TANK CAP fig. 88
To refuel, press flap A to release it and access the fuel tank cap. The flap is locked with the central locking on.
Undo cap B which has a device C retaining it to the flap so it cannot be lost. The sealing may cause a slight pressure increase in the tank. A little breathing off, while slackening the cap is absolutely normal.
When refuelling, fasten the cap to the device inside the flap as shown in the figure.
Do not bring naked flames or lit cigarettes near to the fuel tank opening: fire risk. Keep your face away from the fuel filler to avoid breathing in harmful vapours.
OPENING THE FUEL CAP IN AN EMERGENCY
In case of emergency, pull the cord A-fig. 89. Remove the cover to access the cord.
1
A fig. 88
L0E0060m fig. 89
L0E0184m
154 KNOWING YOUR CAR
PROTECTING THE ENVIRONMENT
The following devices are used for reducing petrol fuel engine emissions:
❍ three-way catalytic converter;
❍ oxygen sensors;
❍ fuel evaporation control system.
In addition, do not let the engine run, even for a test, with one or more spark plugs disconnected.
The following devices are used for reducing diesel fuel engine emissions:
❍ oxidizing catalytic converter;
❍ exhaust gas recirculation system (E.G.R.)
❍ diesel particulate filter (DPF) (for versions/markets where provided).
The catalytic converter develops high temperature during operation. Do not park the car on grass, dry leaves, pine needles or other flammable material: fire hazard.
DIESEL PARTICULATE FILTER (DPF)
(for versions/markets where provided)
The Diesel Particulate Filter is a mechanical filter, integral with the exhaust system, that physically traps particulates present in the exhaust gases of diesel engines. The diesel particulate filter has been adopted to eliminate almost all particulates in compliance with current/future legal regulations. During normal use of the vehicle, the engine control unit records a set of data (e.g.: travel time, type of route, temperatures, etc.) and it will then calculate how much particulate has been trapped by the filter.
Since this filter physically traps particulate, it should be regenerated (cleaned) at regular intervals by burning carbon particles. The regeneration procedure is controlled automatically by the engine management control unit according to the filter conditions and vehicle use conditions.
There may be a limited increase in the engine idle speed during the regeneration, a limited increase in fumes and high temperatures at the exhaust. These are not faults; they do not impair vehicle performance or damage the environment. If the dedicated message is displayed, refer to the “Panel warning lights” paragraph in this chapter.
SAFETY
155
Seat belts ...................................................................... 156
S.B.R. system ................................................................ 157
Pretensioners ................................................................ 158
Carrying children safely ................................................ 161
“Isofix” child restraint assembly setup .......................... 166
Front air bags ............................................................... 169
Side air bags (Side bag – Window bag) ......................... 172
2
156 SAFETY
SEAT BELTS
USING THE SEAT BELTS fig. 1
The belt should be worn keeping the torso straight and rested against the backrest.
To fasten the seat belts, hold the tongue A and insert it into the buckle B, until the locking click is heard. On removal, if it jams, let it rewind for a short stretch, then pull it out again without jerking.
To unfasten the seat belts, press button C. Guide the seat belt with your hand while it is rewinding, to prevent it from twisting. Through the reel, the belt automatically adapts to the body of the passenger wearing it, allowing freedom of movement.
Never press button C when travelling.
The reel may lock when the car is parked on a steep slope: this is perfectly normal. Furthermore, the reel mechanism locks the belt if it is pulled and in the event of sudden braking, collisions and on high speed bends. The rear seat is fitted with inertia seat belts with three anchor points and a reel.
Remember that, in the event of a violent collision, back-seat passengers not wearing seat belts represent a serious danger to the front-seat passengers as well as to themselves.
L0E0061m fig. 1
SAFETY 157
The rear seat belts must be used as shown in the diagram in fig. 2.
IMPORTANT After putting the seats back to their travelling position, restore the seat belt position to make them ready for use.
IMPORTANT If the rear seat is being moved and this causes the middle seat belt to lock temporarily, normal conditions can be restored by simply moving the seat towards the back of the car.
S.B.R. SYSTEM
The car is provided with the S.B.R. (Seat Belt Reminder) system, which warns the driver and the front passenger if the seat belt is not fastened, as follows:
❍ warning light < turns on constantly and continuous activation of the beeper for the first 6 seconds;
❍ warning light < flashes and the buzzer sounds intermittently for the next 96 seconds.
For permanent deactivation, contact a Lancia Dealership.
S.B.R. system can also be reactivated through the set-up menu.
2 fig. 2 L0E0062m
158 SAFETY
PRETENSIONERS
To increase the efficiency of seat belts, the car is fitted with pretensioners which, in the event of a violent frontal impact, rewind the belt a few centimetres ensuring that it adheres perfectly to the occupant before the restraining action begins. The seat belt locks to indicate that the device has intervened; the seat belt cannot be drawn back up even when is guided it manually.
This car is equipped with a second pretensioner (in the kick plate area). Its activation is signalled by the shortening of the metal cable.
IMPORTANT To obtain the highest degree of protection from the action of the pretensioning device, wear the seat belt keeping it tight to the chest and pelvis.
A slight discharge of smoke may be produced during the activation of the pretensioner which is not in harmful and does not involve any fire hazard. The pretensioner does not require any maintenance or lubrication. Anything that modifies its original conditions invalidates its efficiency. If unusual natural events (e.g. floods, sea storms, etc.) have caused the device to be contaminated by water and mud, it must be replaced.
The pretensioner can only be used once. Go to a Lancia Dealership to have it replaced after it has been deployed. The device expiry date is shown on the label on the edge of the door panel: contact a Lancia Dealership when this date approaches.
Operations which lead to knocks, vibrations or localised heating (over 100 °C for a maximum of 6 hours) in the area around the pretensioners may cause damage or trigger them.
These devices are not affected by vibrations caused by irregularities of the road surface or low obstacles such as kerbs, etc. Contact a Lancia Dealership for any assistance.
LOAD LIMITERS
To increase passenger safety, the front seat belt reels contain a load limiter which allows controlled sag in such a way as to dose the force acting on the chest and shoulders during the belt restraining action in the event of front collisions.
SAFETY
GENERAL INSTRUCTIONS FOR USING
THE SEAT BELTS
The driver must comply with (and have all car passengers follow) any local regulations in force concerning the use of seat belts. Always fasten the seat belts before starting.
Seat belts are also to be worn by expectant mothers: the risk of injury in the case of accident is greatly reduced for them and the unborn child if they are wearing a seat belt.
Pregnant women must position the lower part of the belt very low down so that it passes over the pelvis and under the abdomen (see fig. 3).
For maximum safety, keep the back of your seat upright, lean back into it and make sure the seat belt fits closely across your chest and pelvis. Always fasten the seat belts on both the front and the rear seats. Travelling without wearing seat belts will increase the risk of serious injury and even death in the event of an accident.
Under no circumstances should the components of the seat belts and pretensioners be tampered with or removed. Any operations must be carried out by qualified and authorised personnel only. Always go to a Lancia Dealership.
fig. 3 L0E0063m
159
2
160 SAFETY
IMPORTANT The belt must not be twisted. The upper part must pass over the shoulder and cross the chest diagonally. The lower part must adhere to the pelvis (as shown in fig. 3) rather than the abdomen of the passenger. Never use devices (clips, pegs, etc.) to hold the seat belt away from the body.
IMPORTANT Each seat belt must be used by only one person. Never travel with a child sitting on the passenger’s lap and a single belt to protect them both. Do not fasten other objects to the body.
If the belt has been subjected to heavy stress, for example after an accident, it should be changed completely together with the anchors, anchor fastening screws and the pretensioner. In fact, even if the belt has no visible defects, it could have lost its resilience.
SEAT BELTS MAINTENANCE
For keeping the seat belts in efficient conditions, observe the following:
❍ always make sure the belt is well stretched and never twisted; make sure that it is free to run without obstructions;
❍ replace the belt after an accident of a certain severity even if it does not appear to be damaged. Always replace the belt if the pretensioners were deployed;
❍ to clean the belt, wash by hand with water and mild soap, rinse and leave to dry in the shade. Never use strong detergents, bleach, paints or any other substance which could damage the belt fibres;
❍ prevent the reels from getting wet: their correct operation is only guaranteed if water does not get inside;
❍ replace the seat belt when it demonstrates significant wear or cuts.
SAFETY
CARRYING CHILDREN SAFELY
For optimal protection in the event of a collision, all passengers must be seated and wearing adequate restraint systems.
This is even more important for children.
This prescription is compulsory in all EC countries according to EC Directive 2003/20/EC.
Compared with adults, a child’s head is proportionally larger and heavier than the rest of the body, while muscles and bone structure are not fully developed.
Therefore, correct restraint systems are necessary which are different from adult seat belts.
The results of research on the best child restraint system are contained in the European Standard ECE-R44, which enforces the use of restraint systems classified into five groups:
Group 0 0-10 kg in weight
Group 0+
Group 1
Group 2
Group 3
0-13 kg in weight
9-18 kg in weight
15-25 kg in weight
22-36 kg in weight
161
DANGER: Do not put cradle seats facing backwards on the front seat if the front passenger airbag is enabled. Deployment of the airbag in an accident could cause fatal injuries to the baby. It is advisable always to carry children on the rear seat which is the most protected position in the event of an accident. Never fit child seats systems on the front seat if the car is provided with passenger’s air bag: as the airbag could even cause fatal injury regardless of the severity of the collision which caused its deployment. If necessary, children can stay on the front seat, but only if the passenger’s airbag can be disabled. In this case be sure to verify that the air bag is actually deactivated, observing the
“ warning light on the dashboard (see “Front air bag – passenger side” in paragraph “Front air bags”). Move the passenger’s seat as far back as possible to avoid contact between the child seat and the dashboard.
2
162 SAFETY
All child restraint devices must bear the certification data, together with the control mark, on a label solidly fixed to the seat which must never be removed.
Over 1.50 m in height, from the point of view of restraint systems, children are considered as adults and wear the seat belts normally. Lineaccessori Lancia includes child seats for each weight group.
These devices are recommended and have been specifically designed for Lancia cars.
GROUP 0 and 0+
Babies up to 13 kg must be carried facing backwards on a cradle seat, which, supporting the head, does not induce stress on the neck in the event of sharp decelerations.
The cradle is restrained by the car seat belts, as shown in fig. 4 and, in turn, it must restrain the child with its own belts.
GROUP 1
From 9 kg to 18 kg of weight, children may be carried facing forwards.
fig. 4
L0E0272m
SAFETY 163
The figures are only examples for fitting purposes. To install the child restraint, refer to the instructions supplied with the same. Child seats with Isofix attachments are available for a safe anchoring to the seat without using the car seat belts.
GROUP 2
Children from 15 to 25 kg may use the car seat belts directly fig. 4.
The child seat is needed only to position the child correctly with respect to the belts so that the diagonal section crosses the child’s chest and never the neck, and the lower part is snug on the pelvis not the abdomen.
GROUP 3
For children from 22 kg up to 36 kg suitable risers make fastening the seat belt easier.
Figure 4 shows correct child seat positioning on the rear seat. Children over 1.50 m in height can wear seat belts like adults.
Below is a summary of the safety rules to be followed when carrying children:
1) The recommended position for installing child seats is on the rear seat, as it is the most protected area in the event of a crash.
2) If the passenger air bag is deactivated always check that the warning light
“ is lit on the instrument panel to make sure that it has actually been deactivated.
3) Carefully follow the instructions supplied with the child restraint system which the manufacturer must provide. Keep the instructions in the car along with the other documents and this handbook. Do not use second-hand child seats without instructions.
4) Always check the seat belt is well fastened by pulling the strap.
5) Only one child is to be strapped into each retaining system; never carry two children using one child seat.
6) Always check that the seat belts do not rest on the child’s neck.
7) While travelling, do not let the child sit incorrectly or release the belts.
8) Never carry children on your lap, even newborns. Noone, however strong, can restrain a child in the event of an accident.
9) In the event of an accident, replace the child’s seat with a new one.
2
164 SAFETY
SUITABILITY OF PASSENGER SEATS FOR CHILD SEAT USE
The car complies with the new European Directive 2000/3/EC which governs the arrangement possibilities for child seats on the various seats of the car as shown in the following table:
Versions with fixed rear seat excluded
Group
Groups 0, 0+
Group 1
Group 2
Group 3
Weight groups up to 13 kg
9-18 kg
15-25 kg
22-36 kg
Front passenger
U
U
U
U
Rear side passenger
U (*)
U (*)
U (*)
U (*)
Rear central passenger
X
X
X
X
Key:
U = suitable for child restraint systems of the “Universal” category, according to European Standard EEC-R44 for the specified
“Groups”.
X = no child seats may be fitted in the middle rear seat.
(*) The rear seat backrest must be in the vertical position.
SAFETY 165
Versions with fixed rear seat only
Group Weight groups Front passenger
Groups 0, 0+
Group 1
Group 2
Group 3 up to 13 kg
9-18 kg
15-25 kg
22-36 kg
U
U
U
U
Passenger
(passenger side)
U
U
U
U
Rear central passenger
(driver side)
U
U
U
U
Rear side passenger
X
X
X
X
Key:
U = suitable for child restraint systems of the “Universal” category, according to European Standard EEC-R44 for the specified
Groups”.
X = no child seats may be fitted in the rear side seat (driver side).
2
166 SAFETY
“ISOFIX” CHILD RESTRAINT
ASSEMBLY SETUP
The car can be fitted with a Universal Isofix child restraint, a new European standardised system for carrying children safely.
Isofix systems can be fitted alongside a traditional restraint system. An example of a child seat is shown in fig.
5. The Universal Isofix child seat covers weight group 1.
Specific Isofix child seats cover the other weight groups.
These seats must be designed, tested and type-approved specifically for this car (refer to the list of cars attached to the child seat).
Due to its different anchoring system, the child seat must be anchored to the dedicated lower metal rings A-fig. 6, set between rear seat backrest and rear cushion. After removing the rear parcel shelf, secure the upper belt (provided with the child’s seat) to ring (after having opened the associated covering zip B-fig. 6) located in the rear seat backrest.
Remember that, in the case of Universal Isofix child seats, you can use all those seats bearing the marking ECE
R44/03 Universal Isofix.
L0E0065m fig. 5
SAFETY
The Universal Isofix “Duo Plus” child seat and the special
“G 0/1” seat are available from Lineaccessori Lancia.
For any further details on installation/use, refer to the instruction manual for the child seat.
167
Fit the child seat when the car is stationary.
The child seat is correctly anchored to the brackets when you hear the click. Follow the instructions for assembly, disassembly and positioning that the manufacturer must supply with the child restraint system seat.
2 fig. 6 L0E0233m
168 SAFETY
PASSENGER SEAT COMPLIANCE WITH REGULATIONS ON ISOFIX CHILD SEAT USE
The table below shows the different installation possibilities of Isofix restraint systems on seats fitted with Isofix fasteners in compliance with European standard ECE 16.
Weight group Child seat position Class Isofix size Rear side Isofix position
Portable cradle
Group 0 up to 10 kg
Group 0+ up to 13 kg
Group 1: 9 to 18 kg
Side
Facing backwards
Facing backwards
Facing backwards
Facing backwards
Facing backwards
Facing backwards
Facing forwards
Facing forwards
Facing forwards
F-G
E
E
D
C
D
C
B
B1
A
IL
IL
IL
IL
IL
IL
IL
IUF
IUF
IUF
IUF: suitable for Isofix child restraint systems which face forwards, universal class (fitted with third upper fastener), approved for the weight group.
IL: suitable for special child restraint systems. Isofix type suitable and tested for this type of car.
X: Isofix position not suitable for Isofix child seats in this group of weight and/or class.
SAFETY 169
FRONT AIR BAGS
The car is provided with front air bags for the driver and the passenger, driver’s knee air bag (for versions/markets where provided) and front side bags (side bags – window bags).
The front air bags (driver, passenger driver’s knee bag) protect the occupants of the front seats in the event of moderate to serious front impacts by positioning the bag between the occupant and the steering wheel or the dashboard.
Therefore non-activation in other types of collisions (side collisions, rear shunts, roll-overs, etc.) is not a system malfunction.
An electronic control unit will make the bag inflate in the event of a frontal impact.
The bag will inflate instantaneously placing itself between the front occupants body and the structures which could cause injury. It will deflate immediately afterwards.
The front airbags (driver’s, passenger’s, driver’s knee air bags) do not replace but rather complement the seat belts, which you are always recommended to wear, as specified by law in Europe and most non-European countries.
In the event of an impact, someone not wearing a seat belt could move forward and come into contact with a bag which is still in the opening phase. The protection offered by the bag is reduced in such a case.
The front air bags may not be activated in the following situations:
❍ front collisions against highly deformable objects not affecting the front surface of the car (e.g. bumper collision against guard rail, etc.);
❍ car wedging under other vehicles or protective barriers (e.g. trucks or guard rails); they may not provide any additional protection compared with seat belts, so their activation would be inappropriate. Therefore, failure to come into action in the above circumstances does not mean that the system is not working properly.
Do not apply stickers or other objects on the steering wheel, on the dashboard in the passenger side airbag area, on side upholstery on roof and on the seats. Never put objects (e.g. mobile phones) on the passenger’s side dashboard since they could interfere with proper air bag inflation and also cause serious injury to the passengers.
2
170 SAFETY
The front air bags (driver, passenger, driver’s knee bags) are designed and calibrated to protect front seat passengers wearing seat belts.
Their volume at the moment of maximum inflation fills most space between the steering wheel and the driver, between the lower post guard and the knees on passenger side and between the dashboard and the passenger.
The airbags are not deployed in the event of minor front collisions (for which the restraining action of the seat belts is sufficient). Safety belts must always be worn. In the event of frontal impact they guarantee correct positioning of the passenger.
FRONT AIR BAG ON DRIVER’S SIDE fig. 7
It consists of an instantly inflating bag contained in a special recess in the centre of the steering wheel.
FRONT AIR BAG ON PASSENGER SIDE fig. 8
This consists of an instantly inflating bag contained in a special recess in the dashboard: this bag has a larger volume than that of the driver’s.
fig. 7
L0E0067m fig. 8
L0E0068m
SERIOUS DANGER: never place cradle child seats facing backwards on the front passenger’s seat of cars with active passenger’s air bag. Deployment of the airbag in an accident could cause fatal injuries to the child. Always deactivate the passenger air bag when placing a child seat on the front seat. Move the passenger’s seat as far back as possible to avoid contact between the child seat and the dashboard.
Even when this is not mandatory by law, the air bag should be immediately reactivated when children are no longer carried to ensure better protection for the adults.
SAFETY 171
MANUAL DEACTIVATION OF PASSENGER FRONT
AIR BAG AND SIDE BAG
Should it be absolutely necessary to carry a child on the front seat, the passenger front and side airbags can be deactivated.
The instrument panel warning light
“ will stay on constantly until the passenger front air bag and the Side Bag are reactivated.
IMPORTANT To deactivate the passenger’s front air bag and the Side Bag (for versions/markets where provided), refer to paragraphs “Multifunction display” and “Reconfigurable multifunction display” in chapter “1”.
2
KNEE BAG ON DRIVER’S SIDE fig. 9
(for versions/markets where provided)
It consists of an instantly cushion housed into a special compartment provided for the purpose under the lower post guard at driver’s knee level, designed to give further protection in the event of frontal impact.
L0E0069m fig. 9
172 SAFETY
SIDE AIR BAGS
(Side bag – Window bag)
SIDE BAG fig. 10
It consists of an instantly-inflating bag housed in the front seat backrest. It protects the chest and the pelvis of the passengers in the event of side impacts of medium-high severity.
WINDOW BAG fig. 11
This is formed by two “curtain” window bags located behind the side roof cover and are covered by special trim.
They are designed to protect the head of front and rear passengers in the event of side collisions, thanks to the wide cushion inflation surface.
IMPORTANT In the event of a side impact, the system provides best protection if the passenger sits on the seat in a correct position, thus allowing correct window bag deployment.
fig. 10
L0E0070m fig. 11
L0E0071m
SAFETY 173
IMPORTANT The front and /or side air bags may activate in the event of sharp knocks to the underbody of the vehicle (e.g. impact with steps, pavements, potholes or road bumps etc.).
IMPORTANT A small amount of dust will be released when the air bags are deployed. The dust is harmless and does not indicate the beginning of a fire. Furthermore, the surface of the deployed bag and the interior of the car may be covered with dusty residue. This dust can irritate skin and eyes. Wash with mild soap and water in the event of exposure. The expiration date of the explosive charge and the coil contact wire are shown on a specific label on the door edge. When these expiry dates are getting close, they should be replaced at a Lancia Dealership.
IMPORTANT Pretensioners, front airbags and front side bags are deployed according to different logics on the basis of the type of collision. Non-deployment of one of the devices does not necessarily indicate a system malfunction.
Do not rest your head, arms or elbows on the door, on the windows and on the window bag area to avoid injuries during inflation. Never lean your head, arms or elbows out of the window.
IMPORTANT Should an accident occur activating any of the safety devices, take the car to a Lancia Dealership to have the activated devices replaced and the system checked.
Airbag checking, repair and replacement must only be carried out at a Lancia Dealership. If you are having the car scrapped, have the air bag system deactivated at a
Lancia Dealership first. If the car changes ownership, the new owner must be informed of the method of using air bags and the above warnings and also be given this
“Owner Handbook”.
2
174 SAFETY
GENERAL WARNINGS
If when turning the key to MAR the warning light ¬ does not turn on or if it stays on when travelling, there could be a failure in the safety systems; in this event air bags or pretensioners may not be deployed in case of impact or, in a lower number of cases, they deploy accidentally. Contact a Lancia Dealership immediately to have the system checked.
Do not cover the front seat backrests with covers if side bags are fitted.
Never travel with objects on your lap, in front of your chest or with something between your lips like a pipe or pencil, etc. In the event of an impact where the air bags are deployed this could cause serious injury.
Always keep your hands in the correct position on the steering wheel whilst driving so that if the air bags are activated they can inflate properly. Do not drive with your body bent forward. Keep the backrest in an upright position, resting your back on it correctly.
If someone has tried to steal or damage your car, and in the event of floods, have the air bag system checked by a Lancia Dealership.
With ignition key inserted, on MAR, even if the engine is off, the air bags can activate with the car stopped, if it is hit by another vehicle. For this reason, children must never sit on the front seat, even if the car is not moving. We remind you that if the key is inserted and turned to
STOP, no safety device (air bag or pretensioner) is activated following a collision; non-deployment in such cases is consequently not the sign of a fault.
SAFETY 175
The front air bags deploy in the event of more severe collisions than those required for deploying the pretensioners. For collisions in the range between the two activation thresholds, pretensioner activation alone is normal.
Do not hook rigid objects to clothes hangers and support handles.
When the key is turned to MAR, the warning light
“ turns on, flashing for a few seconds, to remind you that the passenger air bag will activate in the event of a collision, then it turns off.
The airbag does not replace seat belts; it increases their effectiveness. Furthermore, since front air bags are not deployed in low speed collisions, side collisions, rear-end shunts or roll-overs, the passengers are only protected by the seat belts which must be fastened at all times.
Do not wash the seats with pressurized water jets or steam (manually or at automatic washing stations).
2
176 SAFETY page intentionally left blank
STARTING AND DRIVING
177
Engine starting ............................................................................178
Handbrake ..................................................................................181
Using the manual gearbox ...........................................................182
Fuel savings ................................................................................183
Towing trailers ............................................................................185
Snow tyres ..................................................................................186
Snow chains ................................................................................187
Car inactivity ..............................................................................187
3
178 STARTING AND DRIVING
ENGINE STARTING
The car is fitted with an electronic engine lock device: if the engine fails to start, see the paragraph on “Lancia
CODE system” in chapter “1”.
The engine may be noisier during the first few seconds of operation, especially after a long period of inactivity. This characteristic feature of the hydraulic tappet system does not compromise functionality or reliability: the system devised for your car was designed to limit maintenance interventions.
It is dangerous to let the engine run in enclosed spaces. The engine consumes oxygen and engine exhaust contains carbon dioxide, carbon monoxide and other toxic gasses. has been started, therefore much effort than usual is required on the brake pedal and steering wheel.
Remember that the brake servo and power steering are not operational until the engine
In the first period of use, we recommend avoiding excessive stress for the car (for instance excessive accelerations, extended travel at maximum speed, sudden braking etc.).
With engine off, do not leave the key in the ignition switch on MAR–ON to prevent draining the battery.
STARTING PROCEDURE FOR PETROL VERSIONS
Proceed as follows:
❍ engage the handbrake;
❍ put the gear lever into neutral;
❍ fully depress the clutch pedal without operating the accelerator;
❍ turn the ignition key to AVV and release it as soon as the engine starts.
STARTING AND DRIVING 179
If the engine does not start at the first attempt, return the ignition key to STOP before repeating the procedure.
If, when the ignition key is turned to MAR, the instrument panel warning light warning light
U
Y remains on together with
, turn the key to STOP and then back to
MAR; if the warning light remains on, try the other keys provided with the vehicle.
Contact a Lancia Dealership if you still cannot start the engine.
STARTING PROCEDURE FOR DIESEL VERSIONS
Proceed as follows:
❍ engage the handbrake;
❍ put the gear lever into neutral;
❍ turn the ignition key to MAR: the warning lights m and Y on the instrument panel will turn on;
❍ wait for the warning lights Y and m to turn off.
The hotter the engine is, the quicker this will happen;
❍ fully depress the clutch pedal without operating the accelerator;
❍ turn the ignition key to AVV as soon as warning light m goes out. Waiting too long will waste the work done by the glow plugs.
Release the key as soon as the engine starts.
IMPORTANT With the engine cold, the accelerator pedal must be fully released when you turn the ignition key to
AVV.
If the engine does not start at the first attempt, return the ignition key to STOP before repeating the procedure. If instrument panel warning light
Y remains lit when the ignition key is turned to MAR, turn the key to STOP and then back to MAR; if the warning light remains lit, try the other keys provided with the vehicle. Contact a Lancia
Dealership if you still cannot start the engine.
Warning light m will flash for 60 seconds after starting or during prolonged cranking to indicate a fault with the glow plug heating system. You can use the car as usual if the engine starts but you should contact a Lancia Dealership as soon as possible.
3
180 STARTING AND DRIVING
HOW TO WARM UP THE ENGINE
AFTER IT HAS JUST STARTED
Proceed as follows:
❍ drive off slowly, letting the engine turn at medium speed. Do not accelerate abruptly;
❍ do not demand maximum performance for the first few kilometres. Wait until the engine coolant gauge starts moving.
STOPPING THE ENGINE
Turn the ignition key to STOP while the engine is idling.
IMPORTANT After a taxing drive, you should allow the engine to “catch its breath” before turning it off by letting it idle to allow the temperature in the engine compartment to fall.
Never bump start the engine by pushing, towing or coasting downhill. This could cause a flow of fuel into the catalytic converter and damage it beyond repair.
A quick burst on the accelerator before turning off the engine serves absolutely no practical purpose, it wastes fuel and is damaging especially to turbocharged engines.
STARTING AND DRIVING 181
HANDBRAKE
The handbrake lever is located between the two front seats.
Pull the lever upwards to operate the handbrake, until the vehicle is braked.
The car should be braked after a few clicks of the lever; if it is not, contact a Lancia
Dealership to have it adjusted.
When the handbrake is on and the ignition key is at MAR, the instrument panel warning light x will come on.
Proceed as follows to release the handbrake:
❍ slightly lift the handbrake and press release button
A-fig. 1;
❍ keep button A pressed and lower the lever. The warning light x on the instrument panel will turn off.
Press the brake pedal when carrying out this operation to prevent the car from moving accidentally.
PARKING THE VEHICLE
Proceed as follows:
❍ stop the engine and engage the handbrake;
❍ engage a gear (on a slope, engage first gear if the car is facing uphill or reverse if it is facing downhill) and leave the wheels steered.
If the car is parked on a steep slope, it is also advisable to block the wheels with a wedge or stone.
Do not leave the ignition key turned to MAR to prevent draining the battery. Always remove the key when you leave the car.
Never leave children in the unattended car. Always remove the ignition key when leaving the car and take it out with you.
3
L0E0072m fig. 1
182 STARTING AND DRIVING
USING THE MANUAL GEARBOX
To engage the gears, press the clutch pedal fully and shift the gear lever into the required position (the gear diagram varies according to the different versions and is shown on the knob or on the plate below the lever fig. 2).
To engage 6t h gear, operate the lever by pressing it towards the right in order to avoid engaging 4t h gear by mistake. The same goes for changing from 6t h to 5t h .
IMPORTANT The car can only be put into reverse gear when it has stopped moving completely. With the engine running, wait at least 2 seconds before engaging reverse gear with the clutch pressed down to the floor in order to avoid damaging or grinding the gears.
To engage reverse gear R from neutral, raise ring A under the knob and at the same time move the gear lever to the left and then forwards.
In 1.6 Multijet version: to engage reverse R from neutral, lift the sliding ring A under the knob and shift the lever to the right and back.
IMPORTANT The clutch pedal should be used only to change gear. Do not drive with your foot resting on the clutch pedal, however lightly. For versions/markets where provided, the electronic clutch control could cut in, interpreting the incorrect driving style as a fault.
Press the clutch pedal fully to change gears correctly. For this reason, there must be no obstacles on the floor under the pedals: ensure that rubber mats (if any) are lying flat and do not interfere with the pedals.
Do not drive with your hand resting on the gear lever, because this pressure, even if light, over time can wear out the internal gearbox components.
L0E0073m fig. 2
STARTING AND DRIVING 183
FUEL SAVINGS
Here are some useful tips to save fuel and minimise harmful emissions of CO
2 and other pollutants (nitric oxides, unburnt hydrocarbons, fine dusts etc…).
GENERAL CONSIDERATIONS
Car maintenance
Have checks and adjustments carried out in accordance with the “Scheduled Servicing Plan”.
Tyres
Check the pressure of the tyres routinely at an interval of no more than 4 weeks: if the pressure is too low, consumption levels increase as resistance to rolling is higher.
Unnecessary loads
Do not travel with an overloaded boot. The weight of the car (especially when driving in town) and its ride greatly affects consumption and stability.
Accessories installed on longitudinal bars
Remove accessories like: roof racks, ski racks, luggage container, etc. from the roof if they are no longer used.
These accessories lower air penetration and adversely affect consumption levels. When transporting particularly large objects, use a trailer if possible.
Electric devices
Use electric devices only for the amount of time needed.
The heated rear window, additional headlights, windscreen wipers and heater fan need a considerable amount of energy, therefore a higher requirement of current involves an increase of fuel consumption (up to +25% in the urban cycle).
Climate control system
Air conditioning leads to higher fuel consumption (on average up to +20%). If the temperature outside permits, try and use the air vents.
Devices for aerodynamic control
The use of non-certified aerodynamic items may adversely affect air drag and fuel consumption levels.
3
184 STARTING AND DRIVING
DRIVING STYLE
Starting
Do not warm the engine with the car at a standstill or at idle or high speed: under these conditions the engine warms up much more slowly, increasing electrical consumption and emissions. It is therefore advisable to move off immediately, slowly, avoiding high speeds: in this way the engine will warm faster.
Unnecessary actions
Avoid revving up when at traffic lights or before stopping the engine. The latter action, like double-declutching, is completely unnecessary and causes increased fuel consumption and pollution.
Gear selection
As soon as the conditions of the traffic and road allow, use a higher gear. Using a low gear for faster acceleration will increase consumption.
In the same way improper use of a high gear increases consumption, emissions and engine wear.
Max. speed
Fuel consumption considerably increases with speed.
Avoiding unnecessary braking and acceleration, which cost in terms of both fuel and emissions.
Acceleration
Accelerating violently will greatly affect consumption and emissions: acceleration should be gradual.
CONDITIONS OF USE
Cold starting
Short journeys and frequent cold starts do not allow the engine to reach optimum operating temperature. This results in a significant increase in consumption levels (from
+15 to +30% on the urban cycle) and emissions.
Traffic and road conditions
Rather high fuel consumption is caused by heavy traffic, for instance when travelling in a queue with frequent use of low gears or in large towns with many traffic lights.
Mountain and rough roads also have a negative effect on fuel consumption.
Traffic hold-ups
During prolonged hold-ups (e.g. level crossings) the engine should be switched off.
STARTING AND DRIVING
TOWING TRAILERS
IMPORTANT NOTES
For towing caravans or trailers the car must be fitted with a certified tow hook and an adequate electric system. Installation should be carried out by specialised personnel who will issue the required papers for travelling on roads.
Install any specific and/or additional rear view mirrors as specified by the Highway Code.
Remember that when towing a trailer, steep hills are harder to climb, braking spaces increase and overtaking takes longer depending on the overall weight.
Engage a low gear when driving downhill, rather than constantly using the brake.
The weight the trailer exerts on the car tow hook reduces the car’s loading capacity by the same amount. To make sure the maximum towable weight is not exceeded (given in the car registration document) account should be taken of the fully laden trailer, including accessories and luggage.
Do not exceed the speed limits specific to each country you are driving in, in the case of vehicles towing trailers.
In any case, the top speed must not exceed 100 km/h.
185
The ABS system with which the vehicle may be equipped does not control the braking system of the trailer. Take special care when travelling on slippery surfaces.
Under no circumstances should the car braking system be modified to control the trailer brake. The trailer braking system must be fully independent of the car’s hydraulic system.
3
186 STARTING AND DRIVING
SNOW TYRES
Use snow tyres of the same size as the normal tyres provided with the car.
A Lancia Dealership will be happy to provide advice concerning the most suitable type of tyre for your requirements.
For the type of snow tyre to fit, the inflation pressures and specifications, follow the instructions in the “Wheels” paragraph in chapter “6” very carefully. The winter features of these tyres are reduced considerably when the tread depth is below 4 mm. Replace them in this case.
Due to snow tyre features, under normal conditions of use or on long motorway journeys, the performance of these tyres is much lower than that of standard tyres. Their usage should therefore be restricted in accordance with to their type approval.
IMPORTANT When snow tyres are used with a maximum speed index below the one that can be reached by the car (increased by 5%), place a notice in the passenger compartment, plainly in view, which states the maximum permissible speed of the snow tyres (as per an EC
Directive).
All four tyres should be the same (brand and track) to ensure greater safety when driving and braking and better driveability.
Remember that it is inappropriate to change the rotation direction of tyres.
The max. speed of snow tyres with “Q” marking is 160 km/h. The Highway Code speed limits must however be always complied with.
STARTING AND DRIVING 187
SNOW CHAINS
The use of snow chains should be in compliance with local regulations.
The snow chains may be applied only onto the front wheel tyres (drive wheels).
Check the tension of the snow chains after the first few metres have been driven.
IMPORTANT Snow chains cannot be fitted to the spacesaver spare wheel. So, if a front (drive) wheel is punctured and chains are needed, a rear wheel should be fitted to the front of the car and the space-saving spare wheel should be fitted to the rear. This way with two normal drive wheels, snow chains can be fitted to them to solve an emergency.
Keep your speed down when snow chains are fitted. Do not exceed 50 km/h. Avoid potholes, steps and pavements and also avoid driving long distances on roads not covered with snow in order to prevent damaging the car and the roadbed.
CAR INACTIVITY
If the car is to be left inactive for longer than a month, the following precautions should be followed:
❍ park the car in a covered, dry and, if possible, wellventilated place;
❍ engage a gear;
❍ check that the handbrake is not engaged;
❍ disconnect the negative battery terminal (for versions with Start&Stop system refer to the paragraph
“Start&Stop system” in chapter “1”);
❍ clean and protect the painted parts of the vehicle with protective wax;
❍ clean and protect the shiny metal parts using special compounds commercially available;
❍ sprinkle talcum powder on the rubber windscreen and rear window wiper blades and lift them off the glass;
❍ open the windows slightly;
❍ cover the car with a fabric or perforated plastic sheet.
Do not use sheets of non-perforated plastic as they do not allow moisture on the car body to evaporate;
❍ inflate tyres to a pressure of +0.5 bar above the normal specified pressure and check regularly;
❍ do not drain the engine cooling system.
3
188 STARTING AND DRIVING page intentionally left blank
IN AN EMERGENCY
In an emergency we recommend that you call the freephone number found in the Warranty Booklet. It is also possible to go to the www.lancia.com website to find the closest Lancia Dealership.
189
Engine starting ....................................................................... 190
Quick tyre repair kit Fix&Go Automatic ................................. 192
Replacing a wheel ................................................................... 199
Changing a bulb ..................................................................... 206
Replacing exterior bulbs .......................................................... 210
Replacing an interior bulb ....................................................... 215
Replacing fuses ....................................................................... 219
Battery recharging .................................................................. 226
Jacking the car ........................................................................ 227
Towing the car ........................................................................ 227
4
190 IN AN EMERGENCY
ENGINE STARTING
Go to a Lancia Dealership immediately if instrument panel warning light Y remains on constantly.
JUMP STARTING fig. 1
If the battery is flat, the engine may be started using an auxiliary battery with the same capacity or a little higher than the flat one.
Strictly avoid using a rapid battery charger for jump starting: this could damage the electronic systems and the engine fuel supply and ignition control units.
This starting procedure must be carried out by expert personnel as incorrect manoeuvres can cause electrical discharges of considerable intensity. Furthermore, battery fluid is poisonous and corrosive: avoid contact with your skin and eyes. Keep naked flames away from the battery. No smoking. Do not cause sparks.
fig. 1
L0E0074m
IN AN EMERGENCY 191
Proceed as follows to start the car:
❍ connect the positive terminals (+ sign close to the terminal) of both batteries using a lead;
❍ with a second lead, connect the negative terminal (–) of the auxiliary battery to an earthing point
E on the engine or the gearbox of the car to be started;
❍ start the engine;
❍ when the engine has been started, follow the sequence above in reverse order to remove the leads.
For versions with Start&Stop system, in case of starting by booster battery, refer to the paragraph “Start&Stop system” in the chapter “1”.
If after a few attempts the engine does not start, do not persist but contact a Lancia Dealership.
IMPORTANT Do not directly connect the negative terminals of the two batteries: any sparks may ignite the explosive gas which could come out of the battery. If the auxiliary battery is installed on another car, prevent any contact between metal parts of the cars and the flat battery.
BUMP STARTING
Never bump start the engine by pushing, towing or driving downhill.
This could cause a flow of fuel into the catalytic converter and damage it beyond repair.
IMPORTANT Remember that the brake servo and electrical power steering system (where provided) are not operational until the engine is started, a greater effort will therefore be required to press the brake pedal or turn the steering wheel.
4
192 IN AN EMERGENCY
QUICK TYRE REPAIR KIT
FIX & GO AUTOMATIC
The quick tyre repair kit Fix & Go automatic is located in the luggage compartment.
The kit fig. 2 includes:
❍ a canister A containing sealant liquid and fitted with:
– filler tube B;
– an adhesive label C with the message “max. 80 km/h” to be applied in a position clearly visible by the driver (on the dashboard) after repairing the tyre;
❍ informative leaflet (see fig. 3), used to ensure the correct use of the quick tyre repair kit and then given to the personnel who will handle the treated tyre;
❍ a compressor D-fig. 2 including a pressure gauge and connections, found in the compartment;
❍ a pair of protective gloves located in the side compartment of the compressor;
❍ adapters for inflating different elements.
The quick repair kit also contains a screwdriver and a tow ring.
fig. 2 L0E0075m fig. 3 L0E0076m
IN AN EMERGENCY
Give the instruction booklet to the personnel charged with handling the treated tyre.
193
IMPORTANT INFORMATION:
The sealing fluid of the quick tyre repair kit is effective with external temperatures between −20 °C and +50 °C.
The sealing fluid will expire.
In the event of a puncture caused by foreign bodies, the kit may be used to repair tyres showing damages on the track or shoulder up to max. 4 mm diameter.
Do not operate the compressor for longer than 20 consecutive minutes. Risk of overheating. The quick repair kit is not suitable for definitive repairs. Tyres may only be repaired temporarily.
The kit cannot be used to repair damage to the tyre sidewall. Do not use the quick repair kit if the tyre is damaged as the vehicle has run on a flat tyre.
4
If the wheel rim is damaged (bad groove distortion causing air leakage) it cannot be repaired. Do not remove the foreign body
(screw or nail) from the tyre.
194 IN AN EMERGENCY
The cylinder contains ethylene glycol. Contains latex: may cause an allergic reaction.
Harmful if swallowed. Eye irritant. May cause sensitisation on inhalation or contact. Avoid contact with eyes, skin and clothes. In the event of contact, wash immediately with plenty of water. Do not induce vomiting if swallowed. Rinse your mouth and drink plenty of water. Call a doctor immediately. Keep away from children. The product must not be used by asthmatics. Do not breathe in the vapours during insertion and suction. Call a doctor immediately if allergic reactions are noted. Store the bottle in the specific compartment, away from sources of heat. The sealant fluid has a limited life.
INFLATION PROCEDURE
Put on the protective gloves provided together with quick tyre repair kit.
❍ Engage the handbrake. Unscrew the tyre valve cap, take out the flexible filler pipe A-fig. 4 and tighten the ring nut B on the tyre valve;
Replace the bottle containing out of date sealant fluid. Dispose of the bottle and the sealant liquid properly. Dispose according to the national and local regulations in force.
L0E0077m fig. 4
IN AN EMERGENCY 195
❍ make sure that switch C-fig. 5 of the compressor is in position 0 (off), start the engine, insert plug E-fig.
5a into the power socket and switch on the compressor by placing switch D-fig. 5 in position 1 (on);
❍ Inflate the tyre to the pressure specified in the “Cold tyre pressures” paragraph, in chapter “6”. For a more accurate reading, check pressure gauge D-fig. 5 with the compressor off;
❍ if after five minutes it is still impossible to reach at least
1.5 bar, disengage the compressor from the valve and power socket, then move the car forwards for approx.
ten metres in order to distribute the sealing fluid inside the tyre evenly, then repeat the inflation operation;
4 fig. 5 L0E0078m fig. 5a L0E0288m
196 IN AN EMERGENCY
❍ if after this operation it is still not possible to reach at least 1.8 bar after five minutes, do not start driving since the tyre is excessively damaged and the fast tyre repair kit cannot guarantee suitable sealing. Contact a Lancia Dealership;
❍ if the tyre reaches the pressure specified in “Cold tyre pressures” pressure in chapter “6”, start driving immediately;
❍ after driving for about 10 minutes stop and check the tyre pressure again; pull up the handbrake;
If the pressure falls below 1.8 bar, do not drive any further: the quick tyre repair kit
Fix & Go automatic cannot guarantee sufficient hold because the tyre is too damaged. Go to a Lancia Dealership.
Apply the adhesive label in a position clearly visible by the driver as a reminder that the tyre has been treated with the quick repair kit. Drive carefully, particularly on bends.
Do not exceed 80 km/h. Do not accelerate and brake suddenly.
❍
❍ if you get a pressure reading of at least 1.8 bar, restore the correct pressure (with engine running and handbrake on) and continue your journey; drive with the utmost care to the nearest Lancia Dealership.
IN AN EMERGENCY
You must inform the dealership that the tyre has been repaired using the quick tyre repair kit. Hand the instruction brochure over to the personnel charged with treating the tyre repaired with the kit.
197
CHECKING AND RESTORING PRESSURE
The compressor can be also used solely for restoring pressure. Release the quick coupling and connect directly to the tyre valve fig. 6; in this way, the cylinder will not be connected to the compressor and no sealing fluid will be injected.
4
L0E0287m fig. 6
198 IN AN EMERGENCY
CYLINDER REPLACEMENT PROCEDURE
To replace the cylinder, proceed as follows:
❍ disconnect connection A-fig. 7;
❍ turn the cylinder to be replaced anticlockwise and raise it;
❍ fit the new cylinder and turn it clockwise;
❍ connect connection A to the cylinder and fit the transparent tube B in the dedicated space.
fig. 7
L0E0289m
IN AN EMERGENCY
REPLACING A WHEEL
GENERAL INSTRUCTIONS
The car may be originally fitted with a space-saver wheel
(for versions/markets, where provided).
Wheel changing and correct use of the jack and spare wheel call for some precautions as listed below.
199
Never remove or cover the label. Never apply a hub cup on a space-saver wheel. The following information is provided in four languages on the label: IMPORTANT! FOR TEM-
PORARY USE ONLY! 80 KM/H MAX.! REPLACE
WITH STANDARD WHEEL AS SOON AS POS-
SIBLE. DO NOT COVER THIS LABEL.
If you change the type of wheel (alloy rims instead of steel rims) you will have to change the entire set of fastening bolts with another set of suitably sized bolts.
The space-saver wheel (for versions/mar kets where provided) is specific to your car, do not use it on other models, or use the spare wheel of other models on your car. The space-saver wheel must only be used in case of emergency. Never use it for more than strictly necessary and never exceed
80 km/h. On the space-saver wheel there is an orange label, summarising the main warnings regarding space-saver wheel usage restrictions.
Alert other drivers that the car is stationary in compliance with local regulations: hazard warning lights, warning triangle, etc.
Any passengers on board should leave the car, especially if it is heavily laden. Passengers should stay away from on-coming traffic while the wheel is being changed. If parked on a slope or rough surface, chock the wheels with wedges or other suitable devices.
4
200 IN AN EMERGENCY
The jack can only be used for changing wheels on the car with which it is provided or on cars of the same model Never use the jack for other purposes, such as lifting other car models.
In no case should it be used for repairs under the car. Incorrect positioning of the jack may cause the jacked car to fall. Do not use the jack for loads higher than those shown on the label. Snow chains cannot be fitted to the space-saver wheel. So, if a front (drive) wheel is punctured and chains are needed, a rear wheel should be fitted to the front of the car and the space-saver wheel should be fitted to the rear. This way, with two normal front driving wheels, you can install the snow chains on them, thus resolving the emergency.
The driving characteristics of the car may change when a space-saver wheel is fitted.
Avoid sudden acceleration and braking, sudden steering and fast cornering. The total life of a space-saver wheel is approximately 3000 km, after which it must be replaced by another wheel of the same type. Never attempt to fit a conventional tyre on a rim designed for use as a space-saver wheel. Have the punctured wheel repaired and replaced as soon as possible. Two or more spacesaver wheels should never be used together. Do not apply grease to the bolt threads before assembly: they might spontaneously unscrew.
If the hub cap is not installed properly, it may detach when the vehicle is running.
Never tamper with the inflation valve. Never introduce tools of any kind between rim and tyre.
Regularly check tyre and space-saver wheel pressure, complying with the data in the chapter “6”.
Tool box (versions with Bose HI-FI)
There is a tool box located in the luggage compartment for versions with Bose HI-FI.
This box contains:
❍ screwdriver;
❍ tow hook;
❍ wheel bolt spanner;
❍ wheel bolt access spanner;
❍ alloy wheel centring device;
❍ jack.
IN AN EMERGENCY 201
REMOVING THE SUBWOOFER
(versions with Bose HI-FI)
(for versions/markets, where provided)
IMPORTANT The following procedure only applies to cars equipped with Bose HI-FI systems with subwoofer
(for versions/markets, where provided).
SUBWOOFER AND SPACE-SAVER WHEEL
Proceed as follows to remove the Subwoofer:
❍ open the luggage compartment, pull tab A-fig. 10 and lift up the mat;
❍ undo locking device A-fig. 8 and lift up the Subwoofer. Then remove connection cable B from velcro attachment C;
❍ rest the Subwoofer to one side in the luggage compartment, remove the container and take out the space-saver wheel;
❍ change the wheel as described in this chapter.
After tyre replacement:
❍ reposition the container and place the Subwoofer on top of it, taking care to position it according to the instructions on the container (fig. 9) so that the arrow on the spacer is pointing in the direction of travel;
❍ rest cable B-fig. 8 on velcro attachment C to avoid pinching it. Then tighten locking device A-fig. 8.
Lower the luggage compartment mat.
4
L0E0177m fig. 8 L0E0176m fig. 9
202 IN AN EMERGENCY
TAKING OUT THE SPACE-SAVER WHEEL
Please note that:
❍ the jack weight is 1.76 kg;
❍ the jack requires no adjustment;
❍ the jack cannot be repaired; if it breaks, it must be replaced with a new one of the same type;
❍ no tool other than its cranking device may be fitted on the jack.
To change a wheel proceed as follows:
❍ stop the car where it is not a danger to other road users and you can replace the wheel safely. The ground must be flat and sufficiently compact;
❍ turn the engine off and engage the handbrake;
❍ engage first gear or reverse;
❍ lift up the luggage compartment mat using handle Afig. 10 (in the presence of a double load platform, first lift the upper cover and then the luggage compartment mat);
❍ unscrew the locking device B-fig. 10;
❍ take out the tool box C and place it next to the wheel to be changed;
❍ remove the space saver wheel D-fig. 10;
❍ use the provided screwdriver to remove the hub cap, levering the dedicated opening on the outer edge; fig. 10 L0E0081m
IN AN EMERGENCY
❍ in the presence of a double load compartment, lift the double compartment mat and attach it to the luggage compartment mat as shown in fig. 10;
❍ for cars fitted with alloy wheels, remove the press-fitted hub cap using the screwdriver provided;
❍ loosen the fixing bolts for the wheel to be changed by about one turn using the spanner provided E-fig. 11;
❍ turn the jack handle to partially open it;
❍ position the jack near the wheel to be replaced at the reference point O on the side member;
❍ make sure that the splines F-fig. 12 on the jack are firmly fitted to tab G on the side member;
203
4 fig. 11 L0E0082m fig. 12
L0E0083m
204 IN AN EMERGENCY
❍ warn anybody nearby that the car is about to be lifted.
They must stay clear and not touch the car until it is back on the ground;
❍ fit the handle H-fig. 12 into device I of the jack and lift the car until the wheel is several centimetres off the ground. When turning the jack handle make sure that it can turn freely without scraping your hand against the ground. The moving components of the jack (screws and joints) can also cause injuries: avoid touching them. If you become soiled with the lubricating grease, wash it off thoroughly;
❍ make sure the contact surfaces on the space-saver wheel are clean so that the retaining bolts will not come loose;
❍ fit the space-saver wheel, aligning pins T-fig. 13 with one of the openings A on the wheel;
❍ tighten the 4 retaining bolts;
❍ turn the jack handle to lower the car and remove the jack;
❍ fully tighten the bolts, passing alternately from one bolt to the opposite one, following the order illustrated in fig. 13.
fig. 13
L0E0113m
IN AN EMERGENCY 205
REFITTING THE STANDARD WHEEL
Following the procedure described previously, raise the car and remove the space saver spare wheel.
Versions with steel rims
Proceed as follows:
❍ make sure the contact surfaces between standard wheel and hub are clean so that the fastening bolts will not come loose;
❍ fit the standard wheel inserting the 4 bolts into the holes;
❍ using the wrench provided, tighten the fastening bolts;
❍ press-fit the hub cap, aligning the special splining (on the cap) with the inflation valve;
❍ lower the car and remove the jack;
❍ using the wrench provided, fully tighten the bolts in the sequence shown previously.
Versions with alloy wheels
❍ Place the wheel onto the hub and tighten the bolts using the wrench provided;
❍ lower the car and remove the jack;
❍ using the spanner provided, fully tighten the bolts in the sequence shown in fig. 8;
❍ refit the press-fitted hub cap, making sure that the reference hole on the wheel is aligned with the reference pin on the cap.
IMPORTANT If it is not fitted properly, the hub cap may detach when the vehicle is running.
4
206 IN AN EMERGENCY
After tyre replacement
❍
Stow the space saver wheel D-fig. 10 in the space provided in the luggage compartment;
❍ fit the partially open jack in its box forcing it lightly to prevent it from vibrating when travelling;
❍ put the tools back into place in the container;
❍ stow the container, complete with tools, in the spare wheel and tighten the locking device B-fig. 10;
❍ reposition the boot mat correctly.
IMPORTANT Do not use inner tubes with tubeless tyres.
Check the inflation pressure of the tyres and the spacesaving wheel periodically.
CHANGING A BULB
GENERAL INSTRUCTIONS
❍ Before changing a bulb, check the contacts for rusting;
❍ burnt-out bulbs must be replaced by others of the same type and wattage;
❍ always check the alignment of the beam after changing a headlight bulb;
❍ when a light is not working, check that the corresponding fuse is intact before changing a bulb. For the location of fuses, refer to the paragraph “Replacing fuses” in this chapter.
Various fastening bolts and space-saver wheels, specific and differing in structural characteristics, are used depending on the wheel rim type (alloy or steel). Fastening bolts for alloy rims can be identified by the presence of a permanent washer and a hollow side on the bolt head.
Therefore, you will need to go to a Lancia Dealership to get the correct type of fastening bolts and space saver wheel if you change the type of wheels fitted (alloy rims instead of steel rims, or vice versa). Keep the bolts fitted as standard in case of re-use of the wheels originally mounted on the car.
Modifications or repairs to the electric system that are not carried out properly or do not take the system technical specifications into account can cause malfunctions leading to the risk of fire.
IN AN EMERGENCY
Halogen bulbs contain gas under pressure; if they break, glass fragments may be dispersed.
When handling halogen bulbs, only touch the metal part. If the transparent bulb is touched with the fingers, its lighting intensity is reduced and life of the bulb may be compromised. In the event of accidental contact, wipe the bulb with a cloth moistened with alcohol and leave it to dry.
207
IMPORTANT The headlight inner surface might be slightly misted: this should not be considered irregular rather a natural phenomenon due to low temperature and the air humidity level. Misting will disappear as soon as the headlights are turned on. The presence of drops inside the headlights indicates infiltration of water. Contact a Lancia Dealership.
IMPORTANT When the weather is cold or damp or after heavy rain or after washing, the surface of headlights or rear lights, may steam up and/or form drops of condensation on the inside. This is a natural phenomenon due to the difference in temperature and humidity between the inside and the outside of the glass which does not indicate a fault and does not compromise the normal operation of lighting devices. The mist disappears quickly when the lights are turned on, starting from the centre of the diffuser, extending progressively towards the edges.
Where possible, it is advisable to have bulbs changed at a Lancia Dealership. Proper operation and orientation of the external lights are essential for driving safety and complying with the law.
4
208 IN AN EMERGENCY
TYPES OF BULBS fig. 14
Various types of bulbs are fitted to your car:
A. Glass bulbs: clipped into position. Pull to remove.
B. Bayonet type bulbs: to remove this type of bulb from its holder, press the bulb and turn it anticlockwise.
C. Tubular bulbs: release them from their contacts to remove.
D. Halogen bulbs: to remove the bulb, release the clip holding the bulb in place.
E. Halogen bulbs: to remove the bulb, release the clip holding the bulb in place.
fig. 14 L0E0084m
Bulbs
Front side lights/Day lights
Rear side lights
Dipped headlamps
Main beam headlamps
Front direction indicator
Rear direction indicator
Side direction indicator
Stop
3 rd brake light
Number plate
Fog lights
Rear fog lamp
Reverse gear
Front courtesy light (white LEDs)
Rear roof light
Glove compartment/luggage compartment courtesy light
Puddle light
(*) Xenon gas discharge bulb
IN AN EMERGENCY
Type
LEDs
LEDs
D1S(*)/H7
H1(*)/H7
PY 24W
LEDs
WY5W
LEDs
LEDs
W5W
H11
W16W
W16W
5L/5K
12V 5W
12V 5W
W5W
–
–
5 W
55 W
16 W
16 W
–
5 W
5 W
–
–
55 W
55 W
24 W
–
5 W
5 W
209
–
C
B
B
C
C
E
–
–
–
A
D
B
–
–
D
A
4
210 IN AN EMERGENCY
REPLACING EXTERIOR BULBS
FRONT LIGHT CLUSTERS fig. 15
These contain the bulbs for the dipped beams, main beams and direction indicators. The bulbs are arranged as follows:
A. Main beam headlights:
B. Dipped beam headlights;
C. Direction indicators
DIPPED BEAM HEADLIGHTS
With incandescent bulbs
To change the bulb, proceed as follows:
❍ remove the protective cover B-fig. 15;
❍ release the bulb holder clip A-fig. 16;
❍ disconnect the electrical connector B;
❍ remove the bulb C and replace it;
❍ fit the new bulb, ensuring that the outline of the metal part coincides with the splining on the curve of the headlight. Then reconnect the electrical connector B and reattach the bulb holding clip A;
❍ refit the protective cover B-fig. 15.
fig. 15 L0E0154m fig. 16 L0E0155m
IN AN EMERGENCY
With gas discharge bulbs (Xenon)
(for versions/markets where provided)
Due to the high power supply voltage, gas discharge bulbs (Xenon) should only be replaced by specialised personnel: danger of death! Go to a Lancia Dealership.
211
With gas discharge bulbs (Xenon)
(for versions/markets where provided)
Due to the high power supply voltage, gas discharge bulbs (Xenon) should only be replaced by specialised personnel: danger of death! Go to a Lancia Dealership.
MAIN BEAM HEADLIGHTS
With incandescent bulbs
To change the bulb, proceed as follows:
❍ remove the protective cover A-fig. 15;
❍ release the bulb holder clip A-fig. 17;
❍ disconnect the electrical connector B;
❍ remove the bulb C and replace it;
❍ fit the new bulb, ensuring that the outline of the metal part coincides with the splining on the curve of the headlight. Then reconnect the electrical connector B and reattach the bulb holding clip A;
❍ refit the protective cover A-fig. 15.
4
L0E0156m fig. 17
212 IN AN EMERGENCY
SIDE LIGHTS/DAY LIGHTS
The side lights/day lights are LED-based.
Contact a Lancia dealership to have these lights replaced.
DIRECTION INDICATORS
Front
To change the bulb, proceed as follows:
❍ remove the protective cover C-fig. 15;
❍ press down near the bulb holder locking tabs (shown in fig. 18 by the arrows) and simultaneously pull the unit;
❍ remove the bulb A and replace it;
❍ refit the protective cover C.
Side
To change the bulb, proceed as follows:
❍ work on the lens cover A-fig. 19 to compress catch B, then pull the unit outwards;
❍ turn the bulb holder C, anticlockwise, extract the press-fitted bulb D and replace it;
❍ refit the bulb holder C in the lens cover and turn it clockwise;
❍ refit the unit making sure that the internal clip B clicks into place.
L0E0158m fig. 18 L0E0157m fig. 19
IN AN EMERGENCY 213
FOG LIGHTS fig. 20
(for versions/markets where provided)
To replace the bulbs in the front fog lights you must contact a Lancia Dealership.
REAR LIGHT CLUSTERS
Contact a Lancia Dealership to replace the LED lights in the rear light clusters.
REVERSING LIGHTS fig. 21
To replace the bulbs in the reversing lights you must contact a Lancia Dealership.
REAR FOG LIGHTS fig. 22
To replace the bulbs in the rear fog lights you must contact a Lancia Dealership.
L0E0160m fig. 21
4
L0E0161m fig. 20 L0E0159m fig. 22
214 IN AN EMERGENCY
THIRD BRAKE LIGHT fig. 23
Contact a Lancia Dealership to replace the LED lights in the third brake light.
NUMBER PLATE LIGHTS
To change the bulb proceed as follows:
❍ remove the lens units A-fig. 24 by acting on the points shown by the arrows;
❍ remove the bulb B and replace it.
fig. 24 fig. 23 L0E0162m fig. 25
L0E0163m
L0E0282m
IN AN EMERGENCY 215
REPLACING AN INTERIOR BULB
For the type of bulb and power rating, see the “Types of bulbs” paragraph.
FRONT ROOF LIGHT
Proceed as follows to replace the bulbs:
❍ remove the roof light A-fig. 26 by acting on the points shown by the arrows;
❍ open the protective flap B-fig. 27;
❍ replace the bulbs C releasing them from the side contacts and making sure that the new bulbs are correctly secured between the contacts;
❍ close the lid B-fig. 27 and fasten the roof light A-fig.
26 in its housing, making sure it is locked correctly.
IMPORTANT In some versions, the roof light in fig. 26 is at the back (electric sun roof version). To replace the relevant bulbs, refer to the procedure described in paragraph “Front roof light” in this chapter.
L0E0165m fig. 26
4
L0E0166m fig. 27
216 IN AN EMERGENCY
REAR ROOF LIGHT
Versions without sun roof
Proceed as follows to replace the bulbs:
❍ work at the point shown by the arrow and remove roof light A-fig. 28;
❍ replace bulb B-fig. 29 releasing it from the side contacts and making sure the new bulb is correctly fastened between the contacts.
Versions with sun roof
To change the bulb, proceed as follows:
❍ work at the point shown by the arrow and remove light A-fig. 30;
❍ replace bulb B-fig. 29 releasing it from the side contacts and making sure the new bulb is correctly fastened between the contacts.
L0E0168m fig. 29
L0E0169m fig. 28 L0E0167m fig. 30
IN AN EMERGENCY 217
LUGGAGE COMPARTMENT LIGHT
To change the bulb, proceed as follows:
❍ open the luggage compartment;
❍ remove the light A-fig. 32 using leverage at the point shown by the arrow;
❍ open protection B-fig. 33 and replace the press-fitted bulb;
❍ close protection B onto the lens cover;
❍ refit the light A by inserting it in its correct position firstly on one side and then on the other until it clicks into place.
4 fig. 32 L0E0171m fig. 33 L0E0172m
218 IN AN EMERGENCY
GLOVE COMPARTMENT LIGHT
To change the bulb, proceed as follows:
❍ open the glove compartment, and remove the light
A-fig. 34;
❍ replace bulb B releasing it from the side contacts and making sure the new bulb is correctly fastened between the contacts.
COURTESY MIRROR LIGHT
(for versions/markets, where provided)
To change the bulb, proceed as follows:
❍ open the cover A-fig. 35 on the mirror;
❍ using leverage at the points shown by the arrows, remove light B;
❍ replace bulb C-fig. 36 releasing it from the side contacts and making sure the new bulb is correctly fastened between the contacts.
L0E0174m fig. 35
L0E0175m fig. 34 L0E0173m fig. 36
IN AN EMERGENCY
REPLACING FUSES
GENERAL INFORMATION
Fuses protect the electric system: they cut in (i.e. they blow) in the event of a failure or improper action on the system. Check the state of the corresponding fuse when a device does not work: the filament A-fig. 37 must be intact. If it is not, replace the blown fuse with another with the same amperage (same colour).
B intact fuse
C fuse with damaged filament.
To replace a fuse, use the pliers D-fig. 37 attached to the dashboard control unit.
Refer to the tables on the following pages to identify the protection fuse.
219
If the fuse blows again contact a Lancia
Dealership.
Never replace a blown fuse with anything other than a new fuse.
Never replace a fuse with another with a higher amp rating; FIRE RISK.
If a general protective fuse (MEGA-FUSE,
MIDI-FUSE, MAXI-FUSE) blows, contact a Lancia Dealership.
Before changing a fuse, check that the ignition key has been removed and that all the other electric devices have been turned off/disabled.
If a general protection fuse for safety systems
(air bag system, braking system), power unit systems (engine system, gearbox system) or steering system blows, contact a Lancia Dealership.
L0E0085m fig. 37
4
220 IN AN EMERGENCY
FUSE LOCATION
Dashboard fuse box
To access the fuses you must remove the press-fitted cover A. The fuse box shown in fig. 38 is located in the lower area next to the pedal unit.
fig. 38 L0E0209m
IN AN EMERGENCY 221
Additional fuses (1.4 Turbo Multi Air versions)
On the 1.4 Turbo Multi Air versions there are four additional fuses (fig. 38a) next to the dashboard junction unit.
Engine compartment fuse box fig. 39 and 40
A second fuse box is located on the right side of the engine compartment, next to the battery. To access this fuse box release the side tabs and remove cover L. The ID number of the electrical component corresponding to each fuse can be found on the back of the cover.
If you need to wash the engine compartment, take care not to directly hit the engine compartment fuse box with the jet of water.
4 fig. 38a L0E0211m fig. 39 L0E0088m
222 IN AN EMERGENCY
Luggage compartment fuse box fig. 41 and 42
To gain access to the fuse box located on the left side of luggage compartment open the relevant inspection lid fig. 41.
fig. 41 L0E0114m fig. 40
L0E0210m fig. 42 L0E0115m
IN AN EMERGENCY
FUSE SUMMARY TABLE
USERS
Right dipped beam headlight
Right dipped beam headlight (Xenon gas discharge bulb)
Left dipped beam headlight, headlight alignment corrector
Left dipped beam headlight (Xenon gas discharge bulb)
Climate control system fan relay coil, body computer
Left rear window winder
Right rear window winder
Reversing lights, engine compartment junction unit relay coils, brake light pedal control (normally closed contact), water in diesel sensor, air flow meter/control on clutch pedal and brake servo pressure sensor (1.4 Turbo Multi Air versions)
Central locking system control unit, fuel flap, dead lock, tailgate release
Third brake light, instrument panel, Adaptive Headlights Node
(1.4 Turbo Multi Air versions excluded), control unit on left hand gas discharge headlight (1.4 Turbo Multi Air versions excluded)
Front roof lights, rear central roof light, driver side and passenger side sun visor lights, luggage compartment roof light, glove compartment courtesy light (Platinum trim level with optional sun roof - excluding MultiAir version)
Radio wiring/Radio/Radio Navigator (excluding MultiAir versions),
Blue&Me TM Node, alarm siren, alarm system on roof light, climate control unit, tyre pressure monitoring system control unit, diagnosis socket connector, rear roof lights, voltage stabiliser (MultiAir versions without optional HI-FI)
Heated rear window
Electric door mirror demisters, demisters on windscreen jets
FUSE
F31
F33
F34
F35
F12
F12
F13
F13
F40
F41
F36
F37
F38
F39
223
20
7.5
10
10
30
7.5
AMPS
5
20
20
5
7.5
15
7.5
15
38
38
38
38
38
38
FIGURE
38
38
38
38
38
38
38
38
4
224 IN AN EMERGENCY
USERS
Windscreen wiper system on steering column stalk, bi-directional windscreen/rear window washer pump system on steering column stalk
Cigar lighter/power socket on tunnel, luggage compartment power socket
Sunroof motor
Driver’s front electric window
Passenger side front electric window
Hazard, right, left and central control panels (lighting), steering wheel controls (lighting), controls on front roof light (lighting), volumetric alarm system control unit, electric sun roof system
(control unit, control lighting), rain/dusk sensor, electro-chromic mirror, front seat heating controls, AUX socket (lighting)
Cigar lighter (lighting), radio wiring, Cruise Control system control,
Blue&Me TM node, Parking sensor node, AQS sensor, climate control system, electric door mirror adjustment, tyre pressure monitoring system control unit, Lane assistance node, Controlled damping suspension node, Eco button (versions with automatic gearbox), automatic gearbox control light guide, control unit on right hand gas discharge headlight (excluding MultiAir versions), voltage stabilizer (MultiAir versions) (*)
Rear wiper system on steering column stalk
Instrument panel, rear direction indicators
(*) Version with gas discharge headlamps.
F51
F52
F53
FUSE
F43
F44
F46
F47
F48
F49
AMPS
30
15
20
20
20
5
5/7.5 (*)
FIGURE
38
38
38
38
38
38
38
15
7.5
38
38
IN AN EMERGENCY
USERS FUSE
Car Radio / Radio Navigator
DRLs/Left side light
DRLs/Right side light
Adaptive Headlamps Node/Control units on right and left hand gas discharge headlights
Climate control fan
Headlight washer pump
Horns
Main beam headlights
PTC1 additional heater
Air conditioning compressor
Fog/cornering lights
Fuel pump
Battery charge status sensor (1.4 Turbo Multi Air version)
Right front seat adjustment node
Left front seat adjustment node
Left front seat heating
Right front seat heating
Audio Hi-Fi control unit (1.4 Turbo Multi Air version excluded)
Voltage stabiliser (1.4 Turbo Multi Air version with HI-FI option)
BASSBOX speaker
(HI-FI system, 1.4 Turbo Multi Air version excluded)
(P038)
(P036)
(P037)
(P039)
F1
F2
F3
F6
F4
F4
F5
F19
F30
F85
F87
F08
F09
F10
F14
F15
AMPS
30
30
10
10
15
20
10
7.5
15
15
5
40
30
15
15
30
10
5
5
5
FIGURE
2
42
42
42
42
42
42
40
40
40
40
40
40
40
40
40
38a
38a
38a
38a
225
4
226 IN AN EMERGENCY
BATTERY RECHARGING
IMPORTANT The battery recharging procedure is given as information only. You are advised to go to a Lancia
Dealership to have this operation performed.
Charging should be slow at a low ampere rating for approximately 24 hours. Charging for a longer time may damage the battery.
VERSIONS WITHOUT Start&Stop SYSTEM
(for versions/markets, where provided)
Charge the battery as follows:
❍ disconnect the negative battery terminal;
❍ connect the charger leads to the battery terminals, observing the polarity;
❍ turn on the charger;
❍ when you have finished, turn the charger off before disconnecting the battery;
❍ reconnect the negative battery terminal.
VERSIONS WITH Start&Stop SYSTEM fig. 43
(for versions/markets, where provided)
To charge, proceed as follows:
❍ detach the connector A (by pressing button B) from sensor C for monitoring the status of the battery installed on the negative battery pole D;
L0E0199m fig. 43
IN AN EMERGENCY 227
❍ connect the positive cable to the positive battery terminal E and the negative terminal to the sensor D as shown in the figure;
❍ turn on the charger. Turn the device off after recharging;
❍ after having disconnected the recharging device, reconnect the connector A to the sensor C as shown in the figure.
Battery fluid is poisonous and corrosive: avoid contact with your skin and eyes. The battery recharging operation must be performed in a ventilated place, away from naked flames or possible sources of sparks to avoid the risk of explosion and fire.
JACKING THE CAR
If the car is to be lifted, go to a Lancia Dealership which is equipped with the arm hoist or workshop lift.
TOWING THE CAR
The tow ring, which is provided with the car, is housed in the tool box, under the boot mat.
FASTENING THE TOW RING fig. 44-45
Proceed as follows:
❍ release cap A;
❍ take the tow ring B from its housing in the tool support;
❍ screw the ring onto the rear or front threaded pin.
4
Don’t try to recharge a frozen battery: If the battery was frozen, have it inspected by skilled personnel before recharging to check that the internal elements are not damaged and that the casing is not cracked, which causes the risk of leakage of poisonous, corrosive acid.
L0E0297m fig. 44
228 IN AN EMERGENCY
Before towing, turn the ignition key to MAR and then to STOP without removing it. The steering column will automatically lock when the key is removed and the wheels cannot be steered.
When towing, remember that without the help of the brake servo and electric power steering, a greater effort is required on the pedal and steering wheel. Do not use flexible cables when towing and avoid jerky movements.
While towing, make sure not to damage parts in contact with the car. When towing the vehicle, it is compulsory to respect specific highway code regulations relating to the tow hook and procedures for towing on the road. Do not start the engine while towing the car. Before tightening the ring clean the threaded housing thoroughly. Make sure that the ring is securely fastened before towing the car.
L0E0091m
The front and rear tow hooks must only be used for emergency situations on the road.
The car may be towed for short distances when a dedicated device is used in compliance with the Highway Code (rigid bar), and in order to move the vehicle on the road in preparation for towing by a tow truck. Tow hooks MUST NOT be used to tow vehicles off the road or where there are obstacles and/or for towing operations using cables or other non-rigid devices. Respecting the above conditions, towing must take place with two vehicles (one towing, the other towed) aligned as much as possible along the same centre line.
fig. 45
SERVICING AND MAINTENANCE
229
Scheduled servicing .................................................................
230
Scheduled Servicing Plan .........................................................
231
Regular checks .........................................................................
235
Heavy-duty use of the car ........................................................
235
Checking fluid levels ................................................................
237
Air filter/Pollen filter ...............................................................
244
Battery .....................................................................................
245
Wheels and tyres ......................................................................
248
Rubber hoses ...........................................................................
250
Windscreen/rear window wiper ................................................
250
Bodywork ................................................................................
253
Interiors ...................................................................................
256
5
230 SERVICING AND MAINTENANCE
SCHEDULED SERVICING
Correct servicing is essential in guaranteeing a long life for the car under the best conditions.
Lancia has prepared a series of checks and service operations to be carried out every 30,000 kilometres (for petrol versions) or every 35,000 kilometres (for diesel versions).
It is, however, important to remember that scheduled servicing does not completely cover all the car’s requirements: even in the initial period before 30,000/35,000 km, and then subsequently between one service and another, ordinary care is always required such as routine checks involving topping up fluid levels, checking tyre pressures etc...
IMPORTANT Scheduled Servicing Coupons are required by the manufacturer. Failure to carry them out may invalidate the warranty.
Scheduled Services are offered by all Lancia Dealerships according to a set time schedule.
If during each operation, in addition to the ones scheduled operations, the need arises for further replacements or repairs, these may only be carried out with the express agreement of the Customer.
IMPORTANT You are advised to contact a Lancia Dealership in the event of any minor operating faults, without waiting for the next service coupon.
If the car is used frequently for towing a trailer, the interval between services should be reduced.
SERVICING AND MAINTENANCE 231
SCHEDULED SERVICING PLAN
Petrol versions
Thousands of miles
Thousands of km
Months
Check tyre condition/wear and adjust pressure if required
Check operation of lighting system (headlights, direction indicators, hazard warning lights, luggage compartment, passenger compartment, instrument panel warning lights, etc.)
Check windscreen wiper/washer operation
Check the position/wear of the windscreen/rear window wiper blades
Check condition and wear of front disc brake pads and operation of pad wear indicator
Check rear disc brake pad condition and wear
Condition visual check: bodywork exterior, underbody protection, pipes and hoses (exhaust – fuel supply system – braking system), rubber elements (boots – sleeves – bushes – etc...)
Check cleanliness of bonnet and boot locks, as well as cleanliness and lubrication of linkages
Check and top up, if required, fluid levels (engine coolant, brake/hydraulic clutch fluid, windscreen washer fluid, battery fluid, etc)
Check handbrake lever travel and adjust if necessary
Visually inspect the condition of accessory drive belt(s)
Visually inspect the conditions of toothed timing belt
●
●
●
●
●
●
●
●
●
18
30
24
●
36
60
48
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
54
90
72
●
72 90 108
120 150 180
96
●
120
●
144
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
5
232 SERVICING AND MAINTENANCE
Replace spark plugs
Replace air filter cartridge
(1)
Change engine oil and oil filter (or every 24 months)
Change brake fluid (or every 24 months)
Change pollen filter (or every 15 months)
Thousands of miles
Thousands of km
(2)
Months
Check exhaust emissions
Check evaporation control system
Check engine management system operation (through the diagnosis socket)
Check battery charge status and possibly recharge
Replace accessory drive belt(s)
Replace toothed timing drive belt (*)
18
30
24
●
●
●
●
●
●
●
36
60
48
●
●
●
●
●
●
●
●
54
90
72
●
●
●
●
●
●
●
●
72 90 108
120 150 180
96
●
●
●
●
●
●
●
●
●
●
120 144
●
●
●
●
●
●
●
●
●
●
●
(*) Regardless of the distance covered, the timing belt must be changed every 4 years for particularly demanding use (cold climates, city driving, long periods of idling) or at least every 5 years.
(1) For 1.4 Turbo Jet and 1.4 Turbo Multi Air versions, in order to guarantee correct operation and prevent serious damage to the engine, it is essential to observe the following:
– only use spark plugs specifically certified for Turbo Jet and Turbo Multi Air engines; all spark plugs should be of the same type and brand (see the “Engine” paragraph);
– strictly comply with the replacement interval recommended in the Scheduled Servicing Plan;
– it is advisable to have this performed at a Lancia Dealership.
(2) If the car is mainly used in cities or travels less than 10,000 km a year, change the engine oil and oil filter every 12 months.
●
●
●
●
●
SERVICING AND MAINTENANCE 233
Diesel versions
Thousands of miles
Thousands of km
Months
Check tyre condition/wear and adjust pressure if required
Check operation of lighting system
(headlights, direction indicators, hazard warning lights, luggage compartment, passenger compartment, instrument panel warning lights, etc.)
Check windscreen wiper/washer operation
Check the position/wear of the windscreen/rear window wiper blades
Check condition and wear of front disc brake pads and operation of pad wear indicator
Check rear disc brake pad liner condition and wear
Condition visual check: bodywork exterior, underbody protection, pipes and hoses (exhaust – fuel supply system – braking system), rubber elements (boots – sleeves – bushes – etc...)
Check cleanliness of bonnet and boot locks, as well as cleanliness and lubrication of linkages
Check and top up, if required, fluid levels
(engine coolant, brake/hydraulic clutch fluid, windscreen washer fluid, battery fluid, etc)
Check handbrake lever travel and adjust if necessary
Check tension and conditions of various accessory drive belts
Check exhaust fumes/emissions
21
35
24
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
42
70
48
●
63
105
72
●
84 105
140 175
96
●
120
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
5
234 SERVICING AND MAINTENANCE
Thousands of miles
Thousands of km
Months
Check engine control system operation (using diagnosis socket)
Check battery charge status and possibly recharge
Replace accessory drive belt(s)
Replace toothed timing drive belt (*)
Replace fuel filter
Replace air filter cartridge
Change engine oil and oil filter (versions without DPF) (or every 24 months)
Change engine oil and oil filter (versions with DPF) (**)
Change brake fluid (or every 24 months)
Change pollen filter (or every 15 months)
21
35
24
●
●
●
42
70
48
●
●
●
●
●
63
105
72
●
●
●
●
84
140
96
●
●
●
●
●
●
105
175
120
●
●
●
●
●
●
●
●
●
●
●
●
●
(*) Regardless of the distance covered, the timing belt must be changed every 4 years for particularly demanding use (cold climates, city driving, long periods of idling) or at least every 5 years.
(**) The engine oil and oil filter should be changed when the warning light on the dashboard comes on, or every 24 months.
If the car is mainly used in towns and cities, change the engine oil and filter every 12 months.
SERVICING AND MAINTENANCE 235
REGULAR CHECKS
Every 1,000 km or before long journeys, check and, if necessary, top-up the following:
❍ engine coolant fluid level;
❍ brake fluid level;
❍ windscreen washer fluid level;
❍ tyre pressure and condition;
❍ operation of lighting system (headlights, direction indicators, hazard lights, etc.);
❍ operation of the windscreen wiper/washer system, position and wear of windscreen/rear window wiper blades.
Every 3,000 km check and top up if required: engine oil level.
HEAVY-DUTY USE OF THE CAR
Should the prevailing use of the car be under one of the following specially demanding conditions:
❍ trailer or caravan towing;
❍ dusty roads;
❍ short (less than 7-8 km) and repeated journeys in subzero temperatures;
❍ frequently idling engine or long-distance, low-speed driving, or in the event of long-term inactivity.
5
236 SERVICING AND MAINTENANCE
Perform the following inspections more frequently than indicated in the Scheduled Servicing Plan:
❍ check front disc brake pad condition and wear;
❍ check cleanliness of bonnet and boot locks, as well as cleanliness and lubrication of linkages;
❍ visually inspect the condition of engine, gearbox, transmission, pipes and hoses (exhaust – fuel supply
– brakes) rubber elements (boots – sleeves – bushes etc.);
❍ check battery charge and fluid level (electrolyte);
❍ visually inspect the condition of auxiliary drive belts;
❍ check air filter and replace, if required.
SERVICING AND MAINTENANCE
CHECK FLUID LEVELS –
1.4 Turbo Jet version
237
L0E0092m
5 fig. 1
238
1.4 Turbo Multi Air version
SERVICING AND MAINTENANCE fig. 2 L0E0204m
1.6 Multijet/2.0 Multijet version
SERVICING AND MAINTENANCE 239
L0E0254m
5 fig. 3
240
1.9 Twin Turbo Multijet version
SERVICING AND MAINTENANCE fig. 4 L0E0254m
SERVICING AND MAINTENANCE
ENGINE OIL A-fig.1-2-3-4
Check the oil level a few minutes (about five) after the engine has stopped, with the car parked on level ground.
The oil level should be between the MIN and MAX marks on the dipstick. The range between the MIN. and MAX.
marks corresponds to about 1 litre of oil.
If the level of the oil is close to or below the MIN. mark, add oil via the filler fitting until the MAX. mark is reached.
The oil level should never exceed the MAX line.
Engine oil consumption
The maximum engine oil consumption is usually
400 grams every 1000 km. When the car is new, the engine needs to run in, therefore the engine oil consumption can only be considered stabilised after the first
5,000–6,000 km.
IMPORTANT The oil consumption depends on driving style and the car usage conditions.
IMPORTANT After adding or changing the oil, let the engine run for a few seconds and wait a few minutes after switching it off before checking the level.
241
When the engine is hot, take care when working inside the engine compartment to avoid burns. Remember that when the engine is hot, the fan may cut in: danger of injury. Pay attention to scarves, ties and other loose fitting garments: they might get caught by moving components.
Do not add any oil with different specifications to those of the existing engine oil.
The used engine oil and the replaced oil filter contain substances that may be dangerous for the environment. It is advisable to have oil and filters changed by a Lancia Dealership, where they will be disposed of properly and in accordance with the law.
5
242 SERVICING AND MAINTENANCE
ENGINE COOLANT B-fig. 1-2-3-4
The coolant level must be checked when the engine is cold and must range between the MIN. and MAX. marks on the reservoir. If the level is low, slowly pour a mixture of 50% demineralised water and 50% PARAFLU UP of
PETRONAS LUBRICANTS through the filler neck until the level reaches MAX.
The mixture of 50% PARAFLU UP and 50% distilled water protects against freezing down to temperatures of
−35 °C. For particularly harsh climate conditions, we recommended using a mixture of 60% PARAFLU UP and
40% distilled water.
PARAFLU UP anti-freeze is used in the engine cooling system. Use the same fluid as in the cooling system when topping up.
PARAFLU UP may not be mixed with any other types of fluids. If this accidentally occurs, do not start the engine and contact a Lancia Dealership.
The engine cooling system is pressurised. If necessary, only replace the cap with another genuine one or the operation of the system may be adversely affected. Do not remove the cap from the reservoir when the engine is hot: danger of scalding.
SERVICING AND MAINTENANCE 243
WINDSCREEN/REAR WINDOW WASHER FLUID
C-fig. 1-2-3-4
Remove the cap, using the special tab, to add fluid.
Use a mixture of water and TUTELA PROFESSIONAL
SC 35, in the following concentrations:
❍ 30% TUTELA PROFESSIONAL SC 35 and 70% water in summer.
❍ 50% TUTELA PROFESSIONAL SC 35 and 50% water in winter.
At temperatures below −20 °C, use undiluted TUTELA
PROFESSIONAL SC 35 fluid.
Check level through the reservoir.
Close the cap by pressing the centre section.
BRAKE FLUID D-fig. 1-2-3-4
Undo the cap and check that the liquid contained in the reservoir is at the maximum level. The fluid level in the reservoir must not exceed the MAX mark. If you need to top up, you should use the brake fluid shown in the “Fluids and lubricants” table (see chapter “6”).
NOTE Carefully clean the cap of the reservoir and the surrounding surface.
Take great care to ensure that impurities do not enter the reservoir when the cap is opened.
For topping-up, always use a funnel with integrated filter with mesh equal to or lower than 0.12 mm.
IMPORTANT Brake fluid is hygroscopic (i.e. it absorbs moisture). For this reason, if the car is mainly used in areas with a high degree of atmospheric humidity, the fluid should be replaced at more frequent intervals than specified in the “Scheduled Servicing Programme”.
Do not travel if the windscreen washer reservoir is empty: using the windscreen washer is essential for improving visibility.
Some commercial windscreen washer additives are flammable. The engine compartment contains hot parts which could start a fire if they come into contact.
5
244 SERVICING AND MAINTENANCE
Prevent brake fluid which is highly corrosive from coming into contact with painted parts. Should this occur, immediately wash with water.
AIR FILTER/POLLEN FILTER
Have the air filter or pollen filter replaced by a Lancia
Dealership.
Brake fluid is poisonous and highly corrosive. In the event of accidental contact, immediately wash the affected parts with water and neutral soap. Then rinse thoroughly.
If swallowed call a doctor straight away.
The symbol π on the container indicates a synthetic brake fluid, which is different from a mineral fluid. Use of mineral type fluids will damage the special rubber seals of the braking system beyond repair.
SERVICING AND MAINTENANCE 245
BATTERY
The car is fitted with a low-maintenance battery, F-fig.
1-2-3-4: no top-ups with distilled water are needed in standard conditions of use.
It does need to be checked regularly at a Lancia Dealership or by specialist personnel to make sure that it is working properly.
Battery liquid is poisonous and corrosive.
Avoid contact with the skin and eyes. Keep naked flames or possible sources of sparks away from the battery: risk of explosion or fire.
Using the battery when the fluid is too low can damage it irreparably and generate a risk of explosion.
CHANGING THE BATTERY
If required, replace the battery with a genuine spare part with the same specifications.
If a battery with different specifications is fitted, the service intervals given in the “Scheduled Servicing Programme” in this chapter will no longer be valid.
Follow the battery manufacturer’s instructions for maintenance.
Advanced ESP system
If the battery is disconnected, the warning light
á will switch on (together with a message in the display) to indicate that the system must be realigned. To switch the warning light off, carry out the following initialisation procedure:
❍ turn the ignition key to MAR:
❍ turn the steering wheel fully both clockwise and anticlockwise (to move from the position with the wheels straight);
❍ turn the ignition key to STOP and then to MAR.
If the warning light
á does not go out after a few seconds, seek assistance from a Lancia Dealership.
5
246 SERVICING AND MAINTENANCE
Incorrect assembly of electric and electronic devices may cause severe damage to your car. Contact a Lancia Dealership if you want to install accessories (alarms, mobile phone, etc.): they will suggest the most suitable devices and advise you if a higher capacity battery needs to be installed.
If the car must remain unused for a long time at very low temperature, remove the battery and bring it to a warm place, to avoid freezing.
When you must perform any operation on the battery or near it, always protect your eyes with special goggles.
Batteries contain substances that can be very dangerous for the environment. It is advisable to have the battery replaced by a Lancia Dealership where it will be disposed of with respect for the environment and according to legal regulation.
SERVICING AND MAINTENANCE 247
USEFUL ADVICE FOR EXTENDING
THE LIFE OF YOUR BATTERY
To avoid draining your battery and make it last longer, observe the following instructions:
❍ when you park the car, ensure the doors, tailgate and bonnet are closed properly, to prevent any light from remaining on inside the passenger’s compartment;
❍ turn off the roof lights, although the car does have an automatic system for switching off internal lights;
❍ do not leave devices (e.g. car radio, hazard lights, etc.) switched on for a long time when the engine is not running;
❍ before performing any operation on the electrical system, disconnect the negative battery cable;
❍ battery terminals should always be perfectly tightened.
IMPORTANT If the charge level remains under 50% for a long time, the battery is damaged by sulphation, reducing its capacity and starting attitude.
The battery will also be more at risk of freezing (this can happen as early as −10 °C). In the case of prolonged idleness, refer to the paragraph “Car inactivity”, in chapter
“3”.
If you decide to install electrical accessories after the car has been purchased which require a permanent electric power supply (alarm, etc.) or accessories which have a serious impact on the electrical balance, seek assistance from a Lancia Dealership because their qualified staff will suggest the most suitable Lancia Lineaccessori devices and assess the overall electric consumption, checking whether the car’s electrical system can cope or whether a more powerful battery is required.
Since these devices continue to consume energy even when the engine is off, they gradually run down the battery.
5
248 SERVICING AND MAINTENANCE
WHEELS AND TYRES
Check the pressure of each tyre, including the space-saver wheel, approximately every two weeks and before long journeys: the pressure should be checked with the tyre rested and cold.
It is normal for the pressure to increase as the car is used; see the “Wheels” paragraph in chapter “6” for the correct tyre inflation pressure.
Incorrect pressure causes abnormal tyre wear fig. 5:
A normal pressure: tread evenly worn.
B low pressure: tread particularly worn at the edges.
C high pressure: tread particularly worn in the centre.
The tyres must be replaced when the tread is less than
1.6 mm thick. In all cases, follow the laws in force in the country where you are driving.
IMPORTANT NOTES
❍ Where possible, avoid braking suddenly, wheel-spinning and crashing into curbs, potholes or other obstacles. Driving for long stretches over bumpy roads can damage the tyres;
❍ check the tyres regularly for cuts on the sides, swelling or irregular tread wear. Go to a Lancia Dealership if required.
❍ avoid overloading the car when travelling: this may cause serious damage to the wheels and tyres;
❍ if a tyre is punctured, stop immediately and change it to avoid damage to the tyre, wheel rim, suspension and steering system;
❍ the tyre ages even if rarely used. Cracks in the tread and on the sidewalls are a sign of ageing. Have the tyres checked by skilled personnel if they have been fitted for longer than six years. Remember to check the space-saver wheel very carefully;
L0E0096m fig. 5
SERVICING AND MAINTENANCE
❍ when replacing the tyres, always fit new tyres, avoiding those of dubious origin;
❍ If a tyre is replaced, you should also change the inflation valve;
❍ to allow even wear between the front and rear tyres, it is advisable to switch them every 10-15 thousand kilometres, keeping them on the same side of the car so as not to reverse the direction of rotation.
249
Avoid moving the tyres from the right side of the vehicle to the left side and vice versa.
Do not repaint alloy wheel rims at temperatures higher than 150 °C. The mechanical specifications of the wheels might be adversely affected.
Remember that the road holding qualities of your car also depend on the correct inflation pressure of the tyres.
If the pressure is too low the tyre will get overheated, with the risk of serious damage to the tyre.
5
250 SERVICING AND MAINTENANCE
RUBBER HOSES
As far as the brake system and fuel rubber hoses are concerned, follow the “Scheduled Servicing Programme” in this chapter carefully.
Ozone, high temperatures and prolonged lack of fluid in the system may cause hardening and cracking of the hoses, with possible leaks. Careful checking is therefore necessary.
WINDSCREEN/REAR WINDOW
WIPER
BLADES
Periodically clean the rubber part using special products;
TUTELA PROFESSIONAL SC 35 is recommended.
Replace the blades if the rubber edge is deformed or worn.
In any case, it is advisable to replace them approximately once a year.
A few simple precautions can reduce the possibility of damage to the blades:
❍ make sure that the rubber part is not frozen to the windscreen in sub-zero temperatures. Use an antifreeze product to release it if required;
❍ remove any snow from the glass: in addition to protecting the blades, this prevents effort from the motor and overheating;
❍ do not operate the windscreen and the rear screen wipers on dry glass.
Driving with worn wiper blades is a serious hazard, because visibility is reduced in bad weather.
SERVICING AND MAINTENANCE 251
Changing the windscreen wiper blades fig. 6
Proceed as follows:
❍ lift the windscreen wiper arm and position the blade so that it forms an angle of 90° with the arm;
❍ press tab A and remove the blade from the arm;
❍ insert the new blade making sure it is locked into place.
Changing the rear window wiper blade fig. 7
Proceed as follows:
❍ raise the cover A and remove the arm from the car, slackening the nut B that fastens it to the pivot pin;
❍ fit the new arm, positioning it correctly, and fully tighten the nut;
❍ lower the cover.
5 fig. 6 L0E0097m fig. 7 L0E0098m
252 SERVICING AND MAINTENANCE
SPRAY NOZZLES
Windscreen washer fig. 8
If the jet of fluid is inadequate, firstly check that there is fluid in the reservoir (see “Checking fluid levels” in this chapter).
Then check that the nozzle holes are not clogged, if necessary clean them using a needle.
The windscreen jets are directed by adjusting the nozzle angle.
The jets should be directed at about a third of the height from the top edge of the windscreen.
IMPORTANT In versions with a sun roof, make sure that the sun roof is closed before operating the front jets.
Rear window washer fig. 9
The rear window washer jets are fixed. The nozzle holder is on the rear window.
fig. 8 L0E0099m fig. 9 L0E0100m
SERVICING AND MAINTENANCE 253
BODYWORK
PROTECTION FROM ATMOSPHERIC AGENTS
The main causes of corrosion are the following:
❍ atmospheric pollution;
❍ salty air and humidity (coastal areas, or hot humid climates);
❍ seasonal environmental conditions.
The abrasive action of wind-borne atmospheric dust and sand, as well as mud and gravel raised by other cars is also not to be underestimated.
On your car, Lancia has implemented the best manufacturing technologies to effectively protect the bodywork against corrosion.
These include:
❍ paint products and systems which give the car a special resistance to corrosion and abrasion;
❍ use of galvanised (or pre-treated) steel sheets with high resistance to corrosion;
❍ spraying the underbody, engine compartment, wheel arch internal parts and other elements with highly protective wax-based products;
❍ spraying protective plastic materials in the most exposed areas: underdoor, inner wing parts, edges, etc.;
❍ using “open” boxed sections to prevent condensation and pockets of moisture from causing rust inside.
BODY AND UNDERBODY WARRANTY
Your car is covered by warranty against perforation due to rust of any original element of the structure or body.
For the general terms of this warranty, refer to the Warranty Booklet.
5
254 SERVICING AND MAINTENANCE
ADVICE FOR PRESERVING THE BODYWORK
Paint
Paintwork does not only serve an aesthetic purpose, but also protects the underlying sheet metal.
Touch up abrasions and scratches immediately to prevent rust formation. Use only original paint products for touch-ups (see “Bodywork paint identification plate” in the “Technical specifications” section).
Normal maintenance of paintwork consists in washing the car: the frequency depends on the conditions and environment where the car is used. For example, in highly polluted areas, or if the roads are sprayed with salt, it is wise to wash the car more frequently.
To correctly wash the vehicle, proceed as follows:
❍ if taking your car through an automatic car wash, remove the aerial from the roof to avoid damaging it;
❍ in washing stations keep the steam jet/high pressure washing nozzles at least 40 cm away from the bodywork to prevent damage. It should be remembered that the build up of water can damage the car over a period of time;
❍ wash the body using a low pressure jet of water;
❍ wipe a sponge with a slightly soapy solution over the bodywork, frequently rinsing the sponge;
❍ rinse well with water and dry with a jet of air or a chamois leather.
Dry the less visible parts particularly carefully, such as the door frames, bonnet and the headlight frames, where water may stagnate more easily. The car should not be taken to a closed area immediately, but left outside so that residual water can evaporate.
Do not wash the car after it has been left in the sun or with the bonnet hot: this may alter the shine of the paintwork.
Exterior plastic parts must be cleaned in the same way as the rest of the car.
Where possible, do not park under trees; the resinous substance that many species release give the paint a dull appearance and increase the possibility of triggering rusting processes.
SERVICING AND MAINTENANCE 255
Hard Black versions
It is recommended to avoid washing with rollers and/or brushes in car wash stations.
Thus, wash the car only by hands using neutral pH detergents; dry it with a wet chamois leather.
Abrasive products and/or polishes should not be used for cleaning the car. Bird droppings must be washed off immediately and thoroughly as the acid they contain is particularly aggressive. Avoid (if possible) to park your car under trees; remove immediately vegetable resins as, when dried, they could only be removed with abrasive products and/or polishes that are not recommended as they could possibly alter the typical paint opacity. Do not use pure windscreen washer fluid for cleaning the front windscreen and rear screen; dilute it min. 50% with water.
IMPORTANT Bird droppings must be washed off immediately and carefully as the acid they contain is particularly aggressive.
Detergents pollute the environment. Only wash the car in areas equipped for the collection and purification of the fluids used in the washing process.
In order to preserve the aesthetic appearance of the paintwork abrasive products and/or polishes should not be used for cleaning the car.
Glasses
To clean glasses, use specific window cleaner products.
Also use clean cloths to avoid scratching the glass or damaging the transparency.
IMPORTANT Wipe the rear window inside gently with a cloth in the direction of the filaments to avoid damaging the heating device.
Engine compartment
At the end of each winter, thoroughly wash the engine compartment, taking care to avoid spraying the water jet directly onto the electronic control units and the relay/fuse control unit on the left side of the engine compartment (as you look from behind the wheel). Have this operation performed at a specialised workshop.
IMPORTANT The washing should take place with the engine cold and the ignition key in the STOP position. After the washing operation, make sure that the various protections (e.g. rubber caps and guards) have not been removed or damaged.
Front headlights
IMPORTANT Never use aromatic substances (e.g.: petrol) or ketones (e.g.: acetone) for cleaning the front headlight plastic lenses.
5
256 SERVICING AND MAINTENANCE
INTERIORS
Periodically check that water is not trapped under the mats (due to water dripping off shoes, umbrellas, etc.) which could cause oxidisation of the sheet metal.
Never use flammable products, such as petrol ether or rectified petrol to clean the inside of the car. The electrostatic charges which are generated by rubbing during the cleaning operation may cause a fire.
SEATS AND FABRIC PARTS
Remove dust with a soft brush or a vacuum cleaner. It is advisable to use a moist brush on velvet upholstery.
Rub the seats with a sponge moistened with a solution of water and neutral detergent.
INTERIOR PLASTIC PARTS
It is advisable to clean interior parts with a moist cloth and a solution of water and mild soap. Use specific products for cleaning plastic, without solvents and specifically designed to prevent damage to the appearance and colour of the treated parts to remove grease and tough stains.
IMPORTANT Never use alcohol or petroleum to clean the instrument panel.
Do not keep aerosol cylinders in the vehicle: risk of explosion. Aerosol cylinders must not be exposed to a temperature exceeding 50 °C.
When the car is exposed to sunlight, the internal temperature can greatly exceed this value.
TECHNICAL SPECIFICATIONS
257
Identification data .......................................................... 258
Engine codes – bodywork versions .................................. 260
Engine ............................................................................ 261
Fuel supply system ......................................................... 263
Transmission .................................................................. 264
Brakes ............................................................................. 264
Suspensions .................................................................... 265
Steering ........................................................................... 265
Wheels ............................................................................ 266
Dimensions ..................................................................... 271
Performance ................................................................... 272
Weights ........................................................................... 273
Capacities ....................................................................... 275
Fluids and lubricants ...................................................... 277
Fuel consumption ........................................................... 279
CO
2 emissions ................................................................ 280
6
258 TECHNICAL SPECIFICATIONS
IDENTIFICATION DATA
The vehicle identification details are, fig. 1:
1 V.I.N. plate (located in the right side of the front cross member);
2 Bodyshell marking (located on the passenger compartment floor, next to the passenger side front seat);
3 Bodywork paint identification plate (located in the left side of the front crossmember);
4 Engine marking (located on the left rear section, gearbox side).
V.I.N. PLATE fig. 2
This plate is fitted to the engine compartment front crossmember and contains the following data:
B Type-approval number.
C Vehicle type identification code.
D Chassis number.
E Maximum authorised weight of vehicle fully laden.
F Maximum authorised weight of vehicle fully laden plus trailer.
G Maximum authorised weight on first axle (front).
H Maximum permitted weight on second (rear) axle.
I Engine type.
L Bodywork version code.
M Spares number.
N Correct value of smoke coefficient (for diesel engines).
fig. 1
L0E0116m fig. 2 L0E0117m
TECHNICAL SPECIFICATIONS 259
CHASSIS MARKING fig. 3
This is printed on the passenger compartment floor, near the right front seat. Slide the flap A forward to access.
The marking includes:
❍ vehicle type (ZAR 844000)
❍ chassis number
BODYWORK PAINT IDENTIFICATION PLATE fig. 4
This plate is applied inside the bonnet and shows the following data:
A Paint manufacturer.
C Lancia colour code.
D Respray and touch-up colour code.
ENGINE MARKING
The engine marking is stamped on the cylinder block and includes the model and the chassis progressive number.
L0E0119m
6 fig. 3 L0E0118m fig. 4
260 TECHNICAL SPECIFICATIONS
ENGINE CODES – BODYWORK VERSIONS
1.4 Turbo Jet 120 HP
1.4 Turbo Multi Air
1.6 Multijet 105 HP
1.6 Multijet 115 HP ( ▲ )
1.6 Multijet 120 HP
1.9 Twin Turbo Multijet
2.0 Multijet 163 HP ( ▲ )
2.0 Multijet 165 HP
ENGINE CODE
198A4000
198A7000
844A3000
955A4000
198A2000
844A1000
198A9000
198A8000
BODYWORK VERSIONS
844AXA1A 00E ( )
844AXA1A 00F (*) ( )
844AXL1A 10 ( )
844AXL1A 10B (*) ( )
844AXP1A 13 ( )
844AXP1A 13B (*) ( )
844AXF1A 06G ( )
844AXF1A 06H (*) ( )
844AXC1A 02G ( )
844AXC1A 02H (*) ( )
844AXE1A 04C ( )
844AXE1A 04D (*) ( )
844AXN1A 12C ( )
844AXN1A 12B (*) ( )
844AXM1A 11 ( )
844AXM1A 11B (*) ( )
(*) Versions with option of 18” tyres
( ) EURO 5 version
( ▲ ) For versions/markets where provided
TECHNICAL SPECIFICATIONS
ENGINE
GENERAL INFORMATION
Type code
Cycle
Number and arrangement of cylinders
Piston bore and stroke
Total displacement
Compression ratio
Max power (EEC) corresponding speed
Max. torque (EEC) corresponding speed
Spark plugs
Fuel mm cm 3 kW
HP rpm
Nm kgm rpm
1.4 Turbo Jet 120 HP
198A4000
Otto
4 in line
72 x 84
1368
9.8 ± 0.2
88
120
5000
206
21
1750
NGK IKR9F8
Unleaded petrol 95 RON
(EN 228 specification)
1.4 Turbo Multi Air
198A7000
Otto
4 in line
72 x 84
1368
9.8
103
140
5000
230
23.4
1750
NGK IKR9F8
Unleaded petrol 95 RON
(EN 228 specification)
261
6
262 TECHNICAL SPECIFICATIONS
GENERAL INFORMATION
Engine code
Cycle
Number and arrangement of cylinders
Piston bore and stroke mm
Total displacement
Compression ratio cm 3
Max power (EEC) corresponding speed
Max. torque (EEC) corresponding speed
Fuel kW
HP rpm
Nm kgm rpm
1.6 Multijet
844A3000
198A2000
955A4000 ( ▲ )
Diesel
4 in line
79.5 x 80.5
1598
16.5 ± 0.4
77/85 ( ▲ )/88
105/115 ( ▲ )/120
4000
300
31
1500
Automotive diesel fuel
(EN590 specifications)
1.9 Twin Turbo Multijet
844A1000
Diesel
4 in line
82 x 90.4
1910
16.5 ± 0.4
139,5
190
4000
400
41
2000
Automotive diesel fuel
(EN590 specifications)
2.0 Multijet
198A9000 ( ▲ )
198A8000
Diesel
4 in line
83 x 90.4
1956
16.5 ± 0.4
120 ( ▲ )/121
163 ( ▲ )/165
4000
350
35.6
1750
Automotive diesel fuel
(EN590 specifications)
( ▲ ) For versions/markets where provided
FUEL SUPPLY SYSTEM
TECHNICAL SPECIFICATIONS
Fuel supply system
1.4 Turbo Jet – 1.4 Turbo Multi Air
Electronically controlled phased sequential Multipoint electronic injection with turbocharger and intercooler
Fuel supply system
1.6 Multijet – 1.9 Twin Turbo Multijet – 2.0 Multijet
Common Rail Multijet direct injection electronically controlled with turbo and intercooler
Modifications or repairs to the fuel supply system that are not carried out properly or do not take the technical specifications of the system into account can cause malfunctions leading to the risk of fire.
263
6
264
TRANSMISSION
TECHNICAL SPECIFICATIONS
Gearbox
Clutch
Drive
BRAKES
Six forward speed plus reverse with synchronisers for the engagement of the forward speeds
Self-adjusting pedal without idle stroke
Front
Service brakes:
– front
– rear
Parking brake
Self-ventilated discs
Disc
Controlled by hand lever, acting on rear brakes
IMPORTANT Water, ice and salt spread on the roads may deposit on the brake disks reducing braking efficiency the first time the brakes are applied.
SUSPENSIONS
Gearbox
Parking brake
STEERING
Type
Steering circle
(kerb to kerb)
(*) With 18" tyres m
TECHNICAL SPECIFICATIONS
Mac Pherson independent wheels
Interconnected wheels with torsion beam
Rack and pinion with electric power steering
10.6/11.2 (*)
265
6
266 TECHNICAL SPECIFICATIONS
WHEELS
RIMS AND TYRES
Pressed steel or alloy rims. Tubeless radial carcass tyres.
All approved tyres are listed in the Vehicle Registration
Document.
IMPORTANT In the event of discrepancies between the information provided in this “Owner’s handbook” and the “Registration Document”, consider the specifications shown in the log book only.
For safe driving, the car must be fitted with tyres of the same make and type on all wheels.
IMPORTANT Do not use inner tubes with Tubeless tyres.
SPACE-SAVER WHEEL
Pressed steel wheel. Tubeless tyre.
WHEEL GEOMETRY
Total front toe in:
Total rear toe in:
–1 ±1 mm
2 ± 2 mm
The figures refer to the car in running order.
UNDERSTANDING TYRE MARKING fig. 5
Example: 195/55 R 16 91 V
195 = Nominal width (S, distance in mm between sidewalls).
55 = Height/width ratio (H/S) as a percentage.
16 = Rim diameter in inches (Ø).
91 = Load rating (capacity).
V = Maximum speed index.
L0E0120m fig. 5
Load rating (capacity)
60 = 250 kg 84 = 500 kg
61 = 257 kg 85 = 515 kg
62 = 265 kg 86 = 530 kg
63 = 272 kg 87 = 545 kg
64 = 280 kg 88 = 560 kg
65 = 290 kg 89 = 580 kg
66 = 300 kg 90 = 600 kg
67 = 307 kg 91 = 615 kg
68 = 315 kg 92 = 630 kg
69 = 325 kg 93 = 650 kg
70 = 335 kg 94 = 670 kg
71 = 345 kg 95 = 690 kg
72 = 355 kg 96 = 710 kg
73 = 365 kg 97 = 730 kg
74 = 375 kg 98 = 750 kg
75 = 387 kg 99 = 775 kg
76 = 400 kg 100 = 800 kg
77 = 412 kg 101 = 825 kg
78 = 425 kg 102 = 850 kg
79 = 437 kg 103 = 875 kg
80 = 450 kg 104 = 900 kg
81 = 462 kg 105 = 925 kg
82 = 475 kg 106 = 950 kg
83 = 487 kg
TECHNICAL SPECIFICATIONS
Maximum speed index
Q = up to 160 km/h.
R = up to 170 km/h.
S = up to 180 km/h.
T = up to 190 km/h.
U = up to 200 km/h.
H = up to 210 km/h.
V = up to 240 km/h.
W= up to 270 km/h.
Y = up to 300 km/h.
Maximum speed rating for snow tyres
QM + S = up to 160 km/h.
TM + S = up to 190 km/h.
HM + S = up to 210 km/h.
267
6
268 TECHNICAL SPECIFICATIONS
UNDERSTANDING RIM MARKING fig. 5
Example: 6J x 15 H2 ET 31.5
6 = rim diameter in inches (1).
J = rim drop centre outline (side projection where the tyre bead rests) (2).
15 = rim nominal diameter in inches (corresponds to diameter of the tyre to be mounted) (3 = Ø).
H2= shape and number of humps (contour used for withholding tubeless tyre beads on the rim).
ET 31.5 = wheel camber angle (distance between the disc/rim supporting plane and the wheel rim centre line).
RIM PROTECTORS fig. 5a
Do not fit wheel caps when using caps fixed
(with springs) to the steel rim and tyres other than factory-fitted tyres provided with Rim
Protector (fig. 5a). The use of unsuitable tyres and wheel hub caps could cause a sudden pressure loss in the tyre.
fig. 5a
L0E0193m
TECHNICAL SPECIFICATIONS 269
Versions Rims Tyres Snow tyres Space-saver
(for versions/markets, where provided)
Rim Tyre
1.4 Turbo Jet
1.4 Turbo
Multi Air
1.6 Multijet
1.9 Twin
Turbo Multijet
2.0 Multijet
7Jx16”- ET31
7Jx16”- ET31
7Jx17”- ET31
7,5Jx18”- ET35 (**)
195/155R16-91V ( ■ )
205/55 R16-91V
225/45 R17-91W
225/40 R18-92W ( ❏ ) (**)
195/55R16-91T (
■
) (M+S)
205/55 R16-91T (M+S)
225/45 R17-91T (M+S)
225/40 R18-92T (M+S)
4Bx15" H-ET 35 (*) 125/90 R15-96M (*)
(*) Depending on the trim level, the space-saver for the 1.9 Twin Turbo Multijet and the 2.0 Multijet has a 205/55 R16-91V tyre and a 7Jx16"-ET31 rim. In this case the 205/55 R16 91V tyre has the same specifications as the space-saver: the information in “Replacing a wheel” therefore refers to the 205/55 R16 91V tyre.
(**) For versions/markets, where provided.
( ❏ ) Tyre to which chains cannot be fitted.
( ■ ) 1.6 Multijet 115HP, 1.6 Multijet 120HP and 2.0 Multijet versions.
On 205/55 R16-91V tyres, use reduced size snow chains with a maximum projection of 9 mm beyond the tyre profile. On 225/45 R17-91W tyres, use reduced size snow chains with a maximum projection of 7 mm beyond the tyre profile.
IMPORTANT Special techniques need to be adopted for 225/40 R18 92W tyres. For this reason, this tyre can only be ordered when the car is purchased. Do not fit this tyre after the vehicle has been purchased!
6
270 TECHNICAL SPECIFICATIONS
COLD TYRE PRESSURES (bar)
Size
Front
Medium load
Rear
STANDARD TYRES
Front
195/55 R16-91VXL
205/55 R16-91V
225/45 R17-91W
225/40 R18-92W
2.4
2.4
2.4
2.6
2.2
2.2
2.2
2.4
2.7
2.7
2.7/2.8 (*)
2.9/3.1 (*)
Full load
Rear
2.5
2.5
2.5
2.7
(*) 1.9 Twin Turbo Multijet and 2.0 Multijet versions
SPACE-SAVER/SPARE WHEEL
Size
205/55 R16-91V
125/90 R15-96
Inflation pressure
2.2
4.2
Add +0.3 bar to the prescribed pressure when the tyres are warm. Check correct pressure on a cold tyre.
With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.
When travelling at speeds over 160 km/h, inflate the tyres to the values specified for fully laden conditions.
The TPMS is not fitted with 195/55 R16 91V tyres.
DIMENSIONS
TECHNICAL SPECIFICATIONS 271 fig. 6
Boot capacity
Capacity with vehicle unladen (VDA standards) ............................. 380 dm 3
Maximum capacity ...........................................................................465 dm 3
Dimensions are expressed in mm and refer to the car equipped with its the tyres supplied. Height is measured with car unladen.
A
4520
B
1017
C
2700
D
803
E
1499 (*)
(*) Small variations in size are possible depending on the dimensions of the rims
F
1538
G
1797
H
1531
L0E0299m
6
272 TECHNICAL SPECIFICATIONS
PERFORMANCE
Maximum speeds after initial car use, in km/h.
1.4 Turbo Jet
120 HP
195
1.4 Turbo
Multi Air
203
1.6 Multijet
105 HP
186
1.6 Multijet
115 HP/120 HP
194
1.9 Twin Turbo
Multijet
222
2.0 Multijet
214
TECHNICAL SPECIFICATIONS
WEIGHTS
Weights (kg)
Unladen weight (with all fluids, fuel tank filled to 90% and without optional equipment):
Payload (*) including the driver:
Maximum allowed loads (**)
– front axle:
– rear axle:
– total:
Towable loads
– trailer with brakes:
– trailer without brakes:
Maximum load on roof:
Maximum load on the ball joint (braked trailer):
1.4 Turbo Jet
1.4 Turbo Multi Air
1320
570
1090
950
1890
1300/600( ꔼ )
600
80
60
1.6 Multijet
1410
570
1090
950
1980
1300
600
80
60
273
(*) If special equipment is fitted (sun roof, tow hook, etc.) the unladen weight increases and consequently the payload will decrease, still complying with the maximum allowed loads.
(**) Loads not be exceeded. The driver is responsible for arranging goods in the luggage compartment and/or on the load carrying platform within the maximum permitted loads.
( ꔼ ) 1.4 Turbo Multi Air version
6
274 TECHNICAL SPECIFICATIONS
Weights (kg)
Unladen weight (with all fluids, fuel tank filled to 90% and without optional equipment):
Payload (*) including the driver:
Maximum allowed loads (**)
– front axle:
– rear axle:
– total:
Towable loads
– trailer with brakes:
– trailer without brakes:
Maximum load on roof:
Maximum load on the ball joint (braked trailer):
1.9 Twin Turbo Multijet
1430
570
1150
950
2000
1300
500
80
60
2.0 Multijet
1430
570
1150
950
2000
1300
500
80
60
(*) If special equipment is fitted (sun roof, tow hook, etc.) the unladen weight increases and consequently the payload will decrease, still complying with the maximum allowed loads.
(**) Loads not be exceeded. The driver is responsible for arranging goods in the luggage compartment and/or on the load carrying platform within the maximum permitted loads.
TECHNICAL SPECIFICATIONS 275
CAPACITIES
Fuel tank: including a reserve of:
Engine cooling system:
Engine sump:
Engine sump and filter:
Gearbox/differential casing:
Hydraulic brake circuit with ABS:
Windscreen/rear window washer fluid reservoir:
1.4 Turbo Jet litres
57
8/10
5,9
2.75
2.9
2.4
–
6 kg
–
–
–
2.4
2.55
2.0
0.8
–
1.4 Turbo MultiAir litres
57
8/10
6.0
3.1
3.5
1.99
–
6 kg
–
–
–
2.65
3.0
1.8
0.8
–
Recommended fuels and original lubricants
Unleaded petrol not less than
95 R.O.N (EN228 specifications)
Mixture of demineralised water and PARAFLU UP in 50-50 proportion ( ▲ )
SELENIA K P.E.
SELENIA WR P.E. ( ❍ )
TUTELA CAR MATRYX ( ꔼ )
TUTELA TRANSMISSION
GEARFORCE ( ❍ )
TUTELA TOP 4
Water and liquid mixture
TUTELA PROFESSIONAL SC 35
( ▲ ) When the vehicle is used in particularly harsh climate conditions, we recommend using a mixture of 60% PARAFLU UP and 40% distilled water.
( ꔼ ) 1.4 Turbo Jet 150 HP version
( ❍ ) 1.4 Turbo Jet 120 HP and 1.4 Turbo Multi Air versions
6
276 TECHNICAL SPECIFICATIONS
Fuel tank: including a reserve of:
Engine cooling system:
Engine sump:
Engine sump and filter:
Gearbox/differential casing:
Hydraulic brake circuit with ABS:
Windscreen/rear window washer fluid reservoir:
1.6 Multijet litres
57
8/10
7.1
kg
–
–
–
4.3
4.9
3.6
4.1
1.87 ( ❍ ) 1.7 ( ❍ )
–
6
0.8
–
1.9 Twin Turbo Multijet
2.0 Multijet litres kg
57
8/10
–
–
7.1
–
Recommended fuels and original lubricants
Diesel fuel for motor vehicles
(Specification EN590)
Mixture of 50% demineralised water and
50% PARAFLU UP ( ▲ )
SELENIA WR P.E.
4.3
4.9
3.6
4.1
1.87 ( ❍ ) 1.7 ( ❍ )
3.1 ( ) 2.7 ( )
TUTELA TRANSMISSION GEARFORCE (
TUTELA CAR MATRYX (
TUTELA TOP 4
)
❍ )
– 0.8
6 –
Water and liquid mixture
TUTELA PROFESSIONAL SC 35
( ▲ ) When the vehicle is used in particularly harsh climate conditions, we recommend using a mixture of 60% PARAFLU UP and
40% distilled water.
( ❍ ) 1.6 Multijet and 2.0 Multijet versions
( ) 1.9 Twin Turbo Multijet version
TECHNICAL SPECIFICATIONS
FLUIDS AND LUBRICANTS
RECOMMENDED PRODUCTS AND SPECIFICATIONS
Use Fluid and lubricant features for correct use of the car
Petrol engine lubricant
Lubricant for diesel engines
(1.6 Multijet and 2.0 Multijet)
Lubricant for diesel engines
(1.9 Twin
Turbo Multijet)
Synthetic based lubricant grade
SAE 5W-40 ACEA C3
FIAT 9.55535-S2 certification.
Synthetic based lubricant grade
SAE 5W-30.
FIAT 9.55535-S1 cerification.
Synthetic based lubricant grade
SAE 5W-40
FIAT 9.55535-Z2 certification.
Genuine fluids and lubricants
SELENIA K P.E.
Contractual Technical
Reference No. F603.C07
SELENIA WR P.E.
Contractual Technical
Reference No. F510.D07
SELENIA SPORT 5W-40
Contractual Technical
Reference No. F716.B08
277
Replacement interval
As per the Scheduled
Servicing Plan
As per the Scheduled
Servicing Plan
As per the Scheduled
Servicing Plan
For 1.6 Multijet and 2.0 Multijet diesel engines, in the event of an emergency in which the original products are not available, lubricants with at least ACEA C2 performance are acceptable; however, in this case optimum engine performance is not guaranteed and the lubricants should be replaced with recommended products as soon as possible at a Lancia Dealership.
The use of products with specifications below ACEA C3 standards for petrol engines and ACEA C2 standards for 1.6 Multijet and
2.0 Multijet diesel engines could cause damage to the engine not covered under the warranty.
For the 1.9 Twin Turbo Multijet engine, only use lubricants with FIAT Classification 9.55535-Z2; the use of lower specification products could cause engine damage not covered by the warranty.
For petrol versions with Multi Air system, the use of lubricants with specifications below ACEA C3 and SAE grade other than
5W-40 could cause damage to the engine not covered by the warranty.
6
278 TECHNICAL SPECIFICATIONS
Use
Petrol engine lubricants
Brake fluid
Protective agent for radiators
Additive for diesel fuel
Windscreen/ rear window washer fluid
Fluid and lubricant features for correct use of the car Genuine fluids and lubricants
SAE 75W grade synthetic base lubricant.
Classification 9.55550-MZ6
Synthetic based lubricant, grade SAE 75W-85.
Exceeds API GL-4 specifications.
Classification 9.55550-MZ1
Grease for constant-velocity joints with low friction coefficient. NL.GI. 0-1 consistency
Classification 9.55580
Molybdenum disulphide grease for high temperatures. NL.GI. 1-2 consistency
Classification 9.55580
Synthetic fluid for brake and clutch systems.
It exceedes the specifications: FMVSS no. 116 DOT 4,
ISO 4925, SAE J 1704. Classification 9.55597
Red protective with antifreeze action, based on inhibited monoethyl glycol with organic formula.
Exceeding CUNA NC 956-16,
ASTM D 3306 specifications.
Additive for diesel fuel, protecting Diesel engines
Mixture of spirits and surfactants.
Exceeds CUNA NC 956-11 specifications.
Classification 9.55522
TUTELA TRANSMISSION
GEARFORCE
Contractual Technical
Reference No. F002.F10
TUTELA CAR MATRYX
Contractual Technical
Reference No. F108.F02
TUTELA STAR 700
Contractual Technical
Reference No. F701.C07
TUTELA ALL STAR
Contractual Technical
Reference No. F702.G07
TUTELA TOP 4
Contractual Technical
Reference No.F001.A93
PARAFLU UP ( ● )
Contractual Technical
Reference No. F101.M01
TUTELA DIESEL ART
Contractual Technical
Reference No. F601.L06
TUTELA
PROFESSIONAL SC 35
Contractual Technical
Reference No. F201.D02
Applications
Gearboxes and manual mechanical (1.4 Turbo Jet
120 HP, 1.4 Turbo Multi Air,
1.6 Multijet and 2.0 Multijet versions)
Gearboxes and manual differentials
(1.9 Multijet versions)
CV joints differential side
CV joints wheel side
Hydraulic brakes and hydraulically operated clutch windscreen/rear window washer/wiper
Cooling circuits.
Percentage of use:
50% water
50% PARAFLU UP ( ❑ )
To be mixed with diesel
(25 cc per 10 litres)
To be used diluted or undiluted in windscreen/rear window washer/wiper systems
( ● ) IMPORTANT Do not use fluids with different specifications for topping up or mixing.
( ❑ ) When the vehicle is used in particularly harsh climate conditions, we recommend using a 60-40 mixture of PARAFLU UP and distilled water.
TECHNICAL SPECIFICATIONS 279
FUEL CONSUMPTION
The fuel consumption figures given in the table below are determined on the basis of the type-approval tests laid down by specific European Directives.
The procedures below are followed for measuring consumption:
❍ urban cycle: cold starting followed by driving that simulates urban use of the car;
❍ extra-urban cycle: frequent accelerations in all gears, simulating extra-urban use of the vehicle: speed varies between 0 and 120 km/h;
❍ combined consumption: calculated with a weighting of about 37% of urban cycle consumption and about
63% of extra-urban consumption.
IMPORTANT The type of route, traffic situations, weather conditions, driving style, general conditions of the car, trim level/equipment/accessories, load, climate control system, roof rack, other situations that affect air drag may lead to different fuel consumption levels than those measured.
FUEL CONSUMPTION ACCORDING TO THE CURRENT EUROPEAN DIRECTIVE (litres/100 km)
Urban
Extra-urban
Combined
1.4 Turbo Jet
120 HP
8.1
5.2
6.3
1.4 Turbo
Multi Air
7.3
4.8
5.7
1.6 Multijet
105 HP
5.7
1.6 Multijet
115 HP/120 HP
5.8
1.9 Twin Turbo
Multijet
7.3
3.9
4.0
4.7
4.6
4.7
5.7
2.0 Multijet
6.7
4.2
5.1
6
280 TECHNICAL SPECIFICATIONS
CO
2
EMISSIONS
The CO
2 emission levels given in the following table refer to combined consumption.
CO
2
EMISSIONS ACCORDING TO THE CURRENT EUROPEAN DIRECTIVE (g/km)
1.4 Turbo Jet
120 HP
146
1.4 Turbo
Multi Air
132
1.6 Multijet
105 HP
120
1.6 Multijet
115 HP/120 HP
122
1.9 Twin Turbo
Multijet
149
2.0 Multijet
135
PRESCRIPTIONS FOR HANDLING THE VEHICLE
AT THE END OF ITS LIFE
Lancia has been committed for many years to safeguarding the environment through the constant improvement of its production processes and manufacturing products that are increasingly compatible with the ecosystem. To assure customers of the best possible service in terms of respecting environmental laws and in response to European Directive 2000/53/EC governing vehicles at the end of their life, Lancia is offering their customers the opportunity of handing over their vehicle* at the end of its life without incurring any additional costs.
The European Directive sets out that when the vehicle is handed over the last keeper or owner should not incur any expenses as a result of its market value. In particular, in almost all European Union countries, until 1 st January 2007, vehicles registered after 1 st July 2002 will be collected free of charge, whilst from 2007 collection will be free of charge irrespective of the year of registration as long as the vehicle contains its basic components (in particular, the engine and bodywork) and has no additional waste.
To hand your vehicle over at the end of its life without extra cost, go to one of our Lancia dealerships or authorized collection and scrapping centres. These centres have been carefully chosen to offer high quality service for the collection, treatment and recycling of vehicles at their end of life, respecting the surrounding environment.
You can find further information on these collection and scrapping centres either from a Lancia Dealership or by calling the freephone number 00800 526242 00 or on the Lancia website.
*Vehicle for transporting passengers with a maximum of nine seats with a total permitted weight of 3.5 t
®
In the heart of your engine.
Always ask your mechanic for
®
Oil change? The experts recommend Selenia
The engine of your car is factory filled with Selenia .
This is an engine oil range which satisfies the most advanced international specifications. Its superior technical characteristics allow Selenia to guarantee the highest performance and protection of your engine.
The Selenia range includes a number of technologically advanced products:
SELENIA K PURE ENERGY
Synthetic lubricant designed for latest generation, low emission, petrol engines. Its specific formulation warrants the utmost protection also for high performance turbocharged engines with high thermal stress.
Its low ash content helps to maintain the total cleanliness of modern catalysts.
SELENIA MULTIPOWER
Particularly ideal for the protection of new generation petrol engines, very effective even in the most severe weather conditions. It guarantees a reduction in fuel consumption
(Energy conserving) and it is also ideal for alternative engines.
SELENIA WR PURE ENERGY
Fully synthetic lubricant that can meet the requirements of the latest diesel engines. Low ash content to protect the particulate filter from the residual products of combustion.
High Fuel Economy System that allows considerable fuel saving.
It reduces the danger of dirtying the turbine to ensure the protection of increasingly high performance diesel engines
SELENIA SPORT
Fully synthetic lubricant capable of meeting the needs of high performance engines.
Studied to protect the engine also in high thermal stress conditions, it prevents deposits on the turbine to achieve the utmost performance in total safety.
The range also includes Selenia StAR Pure Energy, Selenia
Racing, Selenia K, Selenia WR, Selenia 20K, Selenia 20K AR.
For further information on Selenia products visit the web site www.selenia.com.
page intentionally left blank
NOTES
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
..................................................................................................................................................................
LIST OF CONTENTS
287
A BS ....................................118
Adaptive lights ..............77-104
Advanced ESP system .........114
AFS (adaptive lights) ....77-107
Air bag
– front ...............................169
– side ................................172
Air filter/Pollen filter ..........244
Alarm ................................. 46
Ashtray ............................... 84
ASR system .........................116
Assisted parking
(Magic Parking) ................136
Automatic dual zone climate system ................... 59
Automatic headlight sensor
(dusk sensor) .................... 66
B attery
– jump starting ..................190
– recharging ......................226
– replacing ........................245
Bodywork ...........................253
– bodywork versions ..........260
Bonnet ................................100
Boot .................................... 94
Boot light
(bulb replacement) ............217
Brakes .................................264
Bulb (replacement) .............206
– bulb types ......................208
C apacities ...........................275
Car inactivity ......................187
Carrying children safely ......161
Central locking ................... 89
Changing a bulb .................206
– changing an exterior bulb ..210
– changing an interior bulb ..215
Changing a wheel ................199
Checking fluid levels ...........237
Child safety lock ................. 88
Child seats
(suitability for use) ............168
Cigar lighter ........................ 83
Climatic comfort ................. 56
CO
2 emissions .....................280
Code Card ..................... 41-42
Controls .............................. 75
Cornering lights .................. 66
Courtesy mirror lights
(bulb replacement) ............218
7
288 LIST OF CONTENTS
Cruise Control ..................... 71
Cup holder/oddment compartments ................... 82
D ashboard ..........................
8
Dimensions .........................271
Dipped headlamps (control) .. 67
– bulb replacement ............210
Direction indicators
– bulb replacement ............212
– control ............................ 67
Display ............................... 23
– display readings ............. 36
– menu items ..................... 28
Display readings ................. 36
Door locking ....................... 89
Doors .................................. 87
– child safety lock ............. 88
– emergency rear door locking device ................. 90
DPF (particulate filter) .......154
Driving Advisor ...................108
DST (Dynamic Steering
Torque) .............................105
“Dualdrive” electric power steering ...................127
E lectric windows ................. 90
Engine codes/ bodywork versions ............260
Engine compartment
(washing) ..........................255
Engine
– identification code ..........260
– specifications ..................261
EOBD system ......................127
Exterior lights ..................... 65
F ix&Go Automatic
(device) .............................192
Flashing .............................. 67
Fluids and lubricants ..........277
Fog lights ...................... 66-77
– bulb replacement ............213
– Cornering function ......... 66
Follow Me Home (device) ... 68
Food compartment .............. 80
Front/rear armrest ......... 79-81
Fuel cap ..............................153
Fuel consumption ...............279
Fuel cut-off ......................... 78
Fuses (if a fuse blows) .........219
G etting to know your car ....
7
Glove box light
(bulb replacement) ............218
LIST OF CONTENTS 289
Glove compartment ....... 79-82
GSI (Gear Shift Indicator) ... 26
H andbrake .........................181
Hazard lights ...................... 77
Headlights ..........................103
Headrests ............................ 53
Hill Holder (system) ...........115
I dentification data ..............258
Ignition switch .................... 49
In an emergency ..................189
Instrument panel and instruments .......................
9
Interior fittings .................... 79
Interiors ..............................256
K eys ................................... 42
L ancia CODE (system) ....... 41
Lane maintenance assistance system (Driving Advisor) ...108
M agic Parking ....................136
Main beam headlights
(control) ............................ 67
– bulb replacement ............211
Manual climate control system ................... 57
Manual gearbox (use) .........182
Mirrors ................................ 54
MSR system ........................116
N umber plate lights
(bulb replacement) ............214
O n-board instruments .........
9
P aint ..................................254
Parking sensors ...................133
– Assisted parking
(Magic Parking) .............136
Performance .......................272
Power socket ....................... 83
Preparation for Isofix child seat ...........................166
Pretensioners ......................158
Protecting the environment ..154
R adio transmitters and mobile phones ............151
Radio wiring system ............150
Rain sensor ......................... 70
Raising the car ....................227
7
290 LIST OF CONTENTS
Reactive Suspension
System ..............................107
Rear fog lamps .................... 77
Rear fog light ...................... 77
– bulb replacement ............213
Rear window washer ........... 69
Rear window wiper
– blades .............................251
– control ............................ 68
– nozzles ...........................252
Refuelling ...........................152
Remote control (key) .......... 43
Reversing light
(bulb replacement) ............213
Rim Protector (tyres) ..........268
Roof lights .......................... 73
Roof rack/ski rack ..............102
Rubber tubes ......................250
S afety .................................155
Safe lock (device) ................ 45
SBR system .........................157
Seat belts ............................156
Seats ................................... 50
– cleaning ..........................256
– front with electric lumbar adjustment ......... 51
– front with manual adjustment ..................... 50
– with electric heating ....... 51
Servicing and care ...............229
– heavy-duty use of the car ........................235
– regular checks ................235
– scheduled servicing .........230
– Scheduled Servicing
Plan ...............................231
Side lights ........................... 67
Snow chains ........................187
Spark plugs .........................261
SPORT function ..................105
Start&Stop (system) ...........121
Starting the engine ..... 178-190
Starting up and driving .......177
Steering ..............................265
Steering wheel ..................... 54
Steering wheel lock ............. 49
Sun visors ........................... 79
Sunroof ............................... 84
LIST OF CONTENTS 291
Supply ................................263
Suspension ..........................265
– Reactive Suspension
System ...........................107
Symbols .............................. 40
Tyres
– inflation pressure ............270
– provided as standard ......268
– reading tyre markings ....266
– replacement ....................199
– Rim Protector .................268
– snow tyres ......................268
Window cleaning washer .... 68
Windows (cleaning) ............249
Windscreen wipers
– blades .............................245
– control ............................ 68
– nozzles ...........................246
T .P.M.S. system ..................129
Technical specifications .......257
Third brake lights
(bulb replacement) ............214
Top speeds ..........................272
Towing the car ....................227
Towing trailers ....................185
Transmission .......................264
Trip Computer .................... 38
TTC system ........................118
U sing the manual gearbox .............................182
W arning lights on panel ..... 11
Weights ...............................273
Wheel (changing) ................199
Wheel rims
– reading rim markings .....268
Wheels ................................266
When parked ......................181
7
FIAT S.p.A. – Customer Services – Technical Services – Service Engineering
Largo Senatore G. Agnelli, 5 – 10040 Volvera – Torino (Italia)
Print no. 603.81.895 – 02/2011 – 1 edition
The data contained in this publication is intended merely as a guide. Lancia reserves the right to modify the models and versions described in this booklet at any time for technical and commercial reasons. If you have any further questions please consult your Lancia dealer.
Printed in recycled paper without chlorine.
ENGLISH

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Comfortable interior
- Powerful engine
- Sleek design
- Easy to drive
- Fuel-efficient
- Safe and reliable