Yes ZIS480NPII 48 Inch Smart Counter Depth Side by Side Refrigerator Spec Sheet

Add to My manuals
12 Pages

advertisement

Yes ZIS480NPII 48 Inch Smart Counter Depth Side by Side Refrigerator Spec Sheet | Manualzz

MONOGRAM 48" BUILT-IN

SIDE-BY-SIDE REFRIGERATOR

ZIS480NP

FLUSH INSET INSTALLATION

Allows the refrigerator to be installed flush with adjacent cabinetry

ADVANCED TEMPERATURE MANAGEMENT

SYSTEM WITH MULTI-SHELF AIR TOWER

Provides even distribution of air throughout the refrigerator

CLIMATE-CONTROL DRAWER

Allows you to express-chill beverages, express-thaw meats and select specific temperatures for perishable foods

WIFI CONNECT

Enjoy the convenience and freedom of wirelessly controlling functions from your smartphone

LED LIGHTING

Light columns in the freezer and fresh food compartments extend the full length of the interior and LED lighting located inside the vegetable and climate-control drawers illuminate contents without compromising space

GE® WATER FILTER

Has been moved from the fresh food compartment to the overhead cabinet, where it is discreetly out of sight

For questions about your appliance, please call 1-800-626-2000.

PAGE 1 OF 12

DELI DRAWER ON FULL-EXTENSION SLIDES

Keeps meats, cheeses and other everyday foods within easy reach

SEALED VEGETABLE DRAWER

Helps preserve the freshness of foods

ADJUSTABLE GLASS SHELVES

Easily accommodate party trays and platters

GALLON-SIZE DOOR BIN

Holds milk containers, two-liter bottles and pitchers

ADJUSTABLE DOOR BINS

Can be moved to one of two positions in seven locations

DAIRY BIN WITH CENTER DIVIDER

Has a unique magnetic seal that locks in freshness

FILTER-CHANGE INDICATOR LIGHT

Located on the upfront control panel, provides a visual reminder when it's time to replace the filter for the water dispenser

SABBATH MODE

Designed to disable functions in accordance with

Sabbath-observing practice

Product Specification Revised 8/21

SECTION 1

STANDARD INSTALLATION

1/4" FRAMED PANELS 3/4" OVERLAY PANELS

SECTION 2

FLUSH INSET INSTALLATION

For questions about your appliance, please call 1-800-626-2000.

PAGE 2 OF 12 Product Specification Revised 8/21

OVERALL DIMENSIONS STANDARD INSTALLATION

48"

(121.9)

25 3/4"

(65.4)

23 1/2"

(59.7)

SPECIFICATIONS

Overall Width

Overall Height

Overall Depth

Door Clearance

Cutout Width

Cutout Height

Cutout Depth

Plumbing Requirements

Shipping Weight

48" (121.92 cm)

84" (213.36 cm)

25 3/4"(65.4 cm)

28 5/8" (72.1 cm)

47 1/2" (120.7 cm)

84± .

500

(212.1 - 214.6 cm)

24" (61 cm)

1/4" OD copper tubing or

GE SmartConnect kit

775 lb

ATTENTION ELECTRICIAN:

A 115 volt 60Hz., 15 or 20 amp power supply is required. An individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall.

For questions about your appliance, please call 1-800-626-2000.

FRONT VIEW

* Shipping height. Use leveling legs and wheels for maximum

1" height adjustment from shipping height.

47"

(119.4)

Case width

Allow **

15"

(38.1) min clearance for 130˚ door swing

Allow **

20"

(50.8) min clearance for 130˚ door swing

SIDE VIEW

TOP VIEW

** Allow

4 9/16"

(11.6) min

clearance to a wall for 90˚

door swing

** Allow

4 9/16"

(11.6) min

clearance to a wall for 90˚

door swing

** These refrigerators are equipped with a 3-position door stop. The factory-set 115° door swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted.

Allow full 130° door swings for pan removal. If the 90° door stop position is used, pan access is maintained, but pan removal is restricted. Dimensions based on custom handle height of 2 9/16” (6.5).

ZIS480NX

Dimensions in parentheses are in centimeters unless otherwise noted.

Actual product dimensions may vary due to manufacturing tolerances.

PAGE 3 OF 12 Product Specification Revised 8/21

STANDARD INSTALLATION

(212.1-214.6)

*Trim will overlap additional 7/16"

24"

(61)

(120.7)

20"

(50.8)

Trim overlap

6"

(15.2)

E

5"

(12.7)

*84 +- .500

75"

From floor of electrical area

TOP VIEW

24"

(61.0)

47 1/2"

(120.7)

A 20"

(50.8)

7/16"

(1.1)

Trim overlap

E

75"

From floor to bottom of electrical area

W

B

WATER

FRONT VIEW

W

SIDE VIEW

ANTI-TIP BRACKET

C

SOFFIT

D

STANDARD INSTALLATION

ZISB480DH studs

*84"

(213.4)

*Or installation height from floor

E

3/4"

Min.

Top Case Trim

Side View Top

Case Trim

SIDE VIEW INSTALLED

UNDER SOFFIT

SIDE VIEW INSTALLED

WITH WOODEN WALL STUDS

AND NO SOFFIT

ZISB480DX

For questions about your appliance, please call 1-800-626-2000.

Install Screws

Through Trim and Into

3/4" Min. Wood Brace

FRONT VIEW INSTALLED

WITH METAL WALL STUDS

AND NO SOFFIT

PAGE 4 OF 12

STANDARD INSTALLATION

HELPFUL TIPS

A Mounting the junction box in this location will also allow for front accessibility through access panel.

B Water supply area.

WARNING:

The refrigerator is top heavy and must be secured to prevent the possibility of tipping forward.

Failure to do so may result in death or serious injury.

The information below is for cabinet design only. When installing the anti-tip system you must use the product installation instructions.

Determine your installation construction and required anti-tip configuration:

C Installed Under Soffit

After installing unit into installation opening, raise grille panel and screw metal case sides to adjacent cabinet. When installed under a soffit, the soffit cannot exceed 24" deep. The top case trim overlaps the bottom of the soffit.

D Wooden Wall Studs and No Soffit

• Cut a 2" x 4" block and secure to brackets provided.

• Secure brackets to back wall of opening at 84" or your installation height from the floor.

E Metal Wall Studs and No Soffit

This method requires securely fastened cabinets on both sides and a 3/4" minimum wood brace above unit, with it’s front surface 24" from back wall.

• After installing unit into opening, raise grille panel and attach metal case top trim to 3/4" minimum wood brace.

• The brace spanning the enclosure must be securely fastened to cabinets on both sides.

See Installation Instructions for detailed instructions.

Product Specification Revised 8/21

CUSTOM SIDE PANELS

F

24"

(61.0)

1 7/8"

(4.8)

*84"

*Depending on installation height

*3"- 4"

(7.6 - 10.2)

*Depending on installation height

STANDARD INSTALLATION

HELPFUL TIPS

F Side panels must be used whenever the sides of the refrigerator will be exposed.

The 1/4" side panels will slip into the side case trim. Secure the panels to the refrigerator with stick-on hook and lo op fastener strips. Order the side panels from the cabinet manufacturer.

ZIF360NXLH_ZIF360NXRH _ZIFP360NXLH_ZIFP360NXRH_ ZIFS360NXLH_ZIFS360NXRH

ZIR360NXLH_ZIR360NXRH_ZIRP360NXLH_ZIRP360NXRH_ZIRS360NXLH_ZIRS360NXRH

For questions about your appliance, please call 1-800-626-2000.

PAGE 5 OF 12 Product Specification Revised 8/21

1/4" FRAMED PANEL DIMENSIONS

A

D

Grille Panel

E

B

PANEL ASSEMBLY CROSS SECTION

Trim

Door

1/4" Framed Panel

Optional ZKLN kit handles

Freezer

Panel

Fresh

Food

Panel

C

PANEL DIMENSIONS

A B C D E

1/4" Framed Panel 45 7/8" 9 1/2" 68 3/8" 18 9/16" 26 9/16"

STANDARD INSTALLATION

HELPFUL TIPS

Trimmed refrigerators are designed to be customized with decorative panels. Field-installed custom door and grille panels are required.

1/4" FRAMED PANELS:

For 1/4" thick custom panels ordered from your cabinet maker; the decorative panels slide into the trim.

MAXIMUM TOTAL PANEL

WEIGHT:

• Fresh food door panel – 75 lbs.

• Freezer drawer panel – 53 lbs.

• Grille panel – 18 lbs

3/4" OVERLAY PANEL DIMENSIONS

A

D

Grille Panel

E

B

PANEL ASSEMBLY CROSS SECTION

Trim

1/4" Backer Panel

Door

.10" Spacer Panel 3/4" Overlay Panel

Optional ZKLN kit handles

Freezer

Panel

Fresh

Food

Panel

C

PANEL DIMENSIONS

A B C D E

1/4" Backer Panel 45 7/8" 9 1/2" 68 3/8" 18 9/16" 26 9/16"

.10" Spacer Panel 45" 8 5/8" 67" 17 1/4" 25 1/4"

3/4" Overlay Panel 46 1/8" 9 3/4" 68 5/8" 18 13/16" 26 13/16"

.25" + .10" + .75" = 1.10" Total Panel Thickness

For questions about your appliance, please call 1-800-626-2000.

PAGE 6 OF 12

3/4" OVERLAY PANELS:

For 3/4" thick custom panels ordered from your cabinet maker; the decorative panels slide into the trim.

The overlay panel must be secured to a 1/4"-thick backer panel which slides into the trim.

A spacer panel 0.10" thick must be placed between the overlay and backer panels.

Center each panel over the other.

Assemble the panels with glue and screws. Screws must be countersunk into the backer panel.

NOTE: Left-to-right offset is not always equal to top-to-bottom offset.

MAXIMUM TOTAL PANEL

WEIGHT:

• Fresh food door panel – 75 lbs.

• Freezer drawer panel – 53 lbs.

• Grille panel – 18 lbs

Door handles not included. Custom handles supplied by your cabinet maker may be used. Optional visor handle kit ZKLN is available for ordering. Kit includes two handles.

Product Specification Revised 8/21

OVERALL DIMENSIONS

AFTER PANEL INSTALL

50"

(127.0)

FLUSH INSET

INSTALLATION

26"

(66.0)

20 5/8"

(52.4)

72 5/16"

(183.7)

68 5/8"

(174.3)

* 83 1/2"

( 212.1)

SPECIFICATIONS

Overall Width

Overall Height

Overall Depth

Door Clearance

Cutout Width

Cutout Height

Cutout Depth

Plumbing Requirements

Shipping Weight

50" (127.0 cm)†

84 1/2" (214.6 cm) †

26" (66.0 cm) †

28 5/8" (72.1 cm)

51" (129.5 cm)

85" (215.9 cm)

26 3/16" (66.5 cm)

1/4" OD copper tubing or

GE SmartConnect kit

775 lb (351.5 kg)

† Dimensions include 3/4" custom cabinet panel

ATTENTION ELECTRICIAN:

A 115 volt 60Hz., 15 or 20 amp power supply is required. An individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall.

FRONT VIEW

Use leveling legs and wheels for maximum 1" height adjustment from shipping height. Nominal installation height is 84".

47"

(119.4)

Case width

SIDE VIEW

Allow **

15"

(38.1) min clearance for 130˚ door swing

Allow **

20"

(50.8) min clearance for 130˚ door swing

*115° Door swing

Doors can be adjusted to

90° door swing

28 5/8"

(72.7)

TOP VIEW

** Allow 4 9/16" (11.6) min clearance to a wall for 90˚ door swing

** Allow 4 9/16" (11.6) min clearance to a wall for 90˚ door swing

** These refrigerators are equipped with a 3-position door stop. The factory-set 115° door swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted.

Allow a 15" minimum clearance to wall for pan removal. If the 90° door stop position is used, pan access is maintained, but pan removal is restricted. A 130° door swing option is available for standard installation only. Dimensions based on custom handle height of 2 9/16” (6.5).

ZIS480NH

For questions about your appliance, please call 1-800-626-2000.

Dimensions in parentheses are in centimeters unless otherwise noted.

Actual product dimensions may vary due to manufacturing tolerances.

PAGE 7 OF 12 Product Specification Revised 8/21

FLUSH INSET INSTALLATION 3/4" PANELS

FLUSH INSET KIT ZKFN REQUIRED

26 3/16"

(66.5)

Flush inset depth

20 15/16"

(53.2)

Depth to cleat

(212.1-214.6)

*Trim will overlap additional 7/16"

5 1/4"

(13.3)

TOP VIEW

Finished cleats

Case

Case Trim

47 1/2"

E

(120.7)

20"

(50.8)

3/4"

(1.9)

Width of side cleats

3 1/4"

(8.3)

24"

(61.0)

3/4" Panel

1 1/2"

(3.8)

51"

(129.5) Flush inset width

49 1/2"

(125.7)

Width between cleats

1/2"

(1.3) (1.1)

Trim overlap

A E

6 3/4"

(17.1)

22 1/4"

(56.5)

85"

(215.9)

Finished cleats

85"

(215.9)

75"

From floor to bottom of electrical area

75"

From floor of electrical area

5"

(12.7)

SIDE VIEW

W

WATER

FRONT VIEW

5"

(12.7)

ANTI-TIP BRACKET

C

SOFFIT

D

B

7"

(17.8)

WATER

FRONT VIEW SIDE VIEW

W

3 1/2"

(8.9)

2" x 4"

Cut to 35" Length

FLUSH INSTALLATION

ZISB480DH

Screws mounted into vertical wall studs

*84"

(213.4)

*Or installation height from floor

FLUSH INSET INSTALLATION

HELPFUL TIPS

A Mounting the junction box in this location will also allow for front accessibility through access panel.

B Water supply area.

WARNING:

The refrigerator is top heavy and must be secured to prevent the possibility of tipping forward.

Failure to do so may result in death or serious injury.

The information below is for cabinet design only. When installing the anti-tip system you must use the product installation instructions.

Determine your installation construction and required anti-tip configuration:

C Cut a 1" x 4" block 35" long.

Measure and mark under the soffit, 5 1/4" from the front edge of the cabinet. Secure the wood block under the soffit. From the bottom of the block to the finished floor should measure 84".

D Wooden Wall Studs and No

Soffit

• Cut a 2" x 4" block and secure to brackets provided.

• Secure brackets to back wall of opening at 84" or your installation height from the floor.

See Installation Instructions for detailed instructions.

SIDE VIEW INSTALLED

UNDER SOFFIT

SIDE VIEW INSTALLED

WITH WOODEN WALL STUDS

AND NO SOFFIT

ZISB480DX

For questions about your appliance, please call 1-800-626-2000.

PAGE 8 OF 12 Product Specification Revised 8/21

FLUSH INSET INSTALLATION 1/2" PANELS

FLUSH INSET KIT ZKFN REQUIRED

26 3/16"

(66.5)

Flush inset depth

20 13/16"

(52.9) E

5"

(12.7)

5 3/8"

(13.7)

47 1/2"

(120.7)

20"

(50.8)

3/4"

(1.9)

Width of side cleats

TOP VIEW

Finished cleats

Case

Case Trim

1/2" Panel

3 1/4"

(8.3)

Door 24"

(61.0)

1 1/2"

(3.8)

51"

(129.5) Flush inset width

49 1/2"

(125.7)

Width between cleats

E

22 1/4"

(56.5)

(212.1-214.6)

*Trim will overlap additional 7/16"

Finished cleats

75"

From floor to bottom

1/2"

(1.3)

(1.1)

Trim overlap

75"

From floor to bottom

A

ANTI-TIP BRACKET

5"

(12.7)

WATER

SIDE VIEW FRONT VIEW

C

SOFFIT

5"

(12.7)

3 1/2"

(8.9)

7"

(17.8)

D

FLUSH INSTALLATION

ZISB480DH

Screws mounted into vertical wall studs

*84"

(213.4)

*Or installation height from floor

7"

(17.8)

B

WATER

SIDE VIEW

W

2" x 4"

Cut to 35" Length

3 1/2"

(8.9)

FLUSH INSET INSTALLATION

HELPFUL TIPS

A Mounting the junction box in this location will also allow for front accessibility through access panel.

B Water supply area.

WARNING:

The refrigerator is top heavy and must be secured to prevent the possibility of tipping forward.

Failure to do so may result in death or serious injury.

The information below is for cabinet design only. When installing the anti-tip system you must use the product installation instructions.

Determine your installation construction and required anti-tip configuration:

C Cut a 1" x 4" block 35" long.

Measure and mark under the soffit, 5 3/8" from the front edge of the cabinet. Secure the wood block under the soffit. From the bottom of the block to the finished floor should measure

84".

D Wooden Wall Studs and No

Soffit

• Cut a 2" x 4" block and secure to brackets provided.

• Secure brackets to back wall of opening at 84" or your installation height from the floor.

See Installation Instructions for detailed instructions.

SIDE VIEW INSTALLED

UNDER SOFFIT

SIDE VIEW INSTALLED

WITH WOODEN WALL STUDS

AND NO SOFFIT

ZISB480DX

For questions about your appliance, please call 1-800-626-2000.

PAGE 9 OF 12 Product Specification Revised 8/21

FLUSH INSET 3/4" PANEL DIMENSIONS

A

D

Grille Panel

E

B

PANEL DIMENSIONS

A

50"

B C D E

11 3/16" 68 5/8" 20 7/8" 28 7/8"

C

Freezer

Panel

Fresh

Food

Panel

3/4" RAISED DOOR PANEL ROUTING

11/32"

1/4"

DETAIL TOP

3/4"

1/4" 11/32"

NOTE: Routed areas should be finished as they may be visible when assembled.

Front

TOP

Back

Back Front

3/32"

DETAIL BOTTOM

DETAIL HINGE

SIDE

ROUTER DEPTH 1/4"

2 1/16"

Front

CORNER VIEW SHOWING

“PICTURE FRAME” ROUTING

3/16"

DETAIL HANDLE

SIDE

HINGE

SIDE

HANDLE

SIDE

BOTTOM

3/4" PANEL SIDE VIEW

(AFTER ROUTING)

Back

3/4" PANEL BOTTOM VIEW

(AFTER ROUTING)

For questions about your appliance, please call 1-800-626-2000.

PAGE 10 OF 12

FLUSH INSET INSTALLATION

HELPFUL TIPS

Trimmed refrigerators are designed to be customized with decorative panels. Field-installed 1/2" or 3/4" custom door and grille panels are required. For 3/4" raised door and grille panels, routing is required.

The router depth is 1/4" all the way around the panel’s backs. Additional panel width reductions are required per the diagrams shown. This will create “picture frame” routing allowing the panels to slide into the attached door and grille trims.

MAXIMUM TOTAL PANEL

WEIGHT:

• Fresh food door panels – 75 lbs.

• Freezer drawer panel – 53 lbs.

• Grille panel – 18 lbs.

DOOR HANDLES

Door handle not included.  A custom handle supplied by your cabinet maker may be used.

WARNING:

Door Trim Pinch Point

Hazard Improper installation can lead to a finger pinch point hazard between the side door trim and the cabinets when operating the door, especially with children.

To minimize this risk you must follow the installation instructions for cabinet dimensions, trim assembly and door stop angle.

Product Specification Revised 8/21

3/4" RAISED GRILLE PANEL ROUTING

NOTE: Routed areas should be finished as they may be visible when assembled.

Front

DETAIL TOP

Back

CORNER VIEW SHOWING

“PICTURE FRAME” ROUTING

LEFT

SIDE

DETAIL

LEFT SIDE

ROUTER DEPTH 1/4"

2 1/16"

2"

TOP

Back Front

3/16"

DETAIL BOTTOM

BOTTOM

3/4" PANEL SIDE VIEW

(AFTER ROUTING)

Front

Back

3/4" PANEL BOTTOM VIEW

(AFTER ROUTING)

DETAIL RIGHT

SIDE

ROUTER DEPTH 1/4"

2 1/16"

RIGHT

SIDE

FLUSH INSET INSTALLATION

HELPFUL TIPS

Trimmed refrigerators are designed to be customized with decorative panels. Field-installed 1/2" or 3/4" custom door and grille panels are required. For 3/4" raised door and grille panels, routing is required.

The router depth is 1/4" all the way around the panel’s backs. Additional panel width reductions are required per the diagrams shown. This will create “picture frame” routing allowing the panels to slide into the attached door and grille trims.

MAXIMUM TOTAL PANEL

WEIGHT:

• Fresh food door panels – 75 lbs.

• Freezer drawer panel – 53 lbs.

• Grille panel – 18 lbs.

DOOR HANDLES

Door handle not included.  A custom handle supplied by your cabinet maker may be used.

For questions about your appliance, please call 1-800-626-2000.

PAGE 11 OF 12 Product Specification Revised 8/21

FLUSH INSET 1/2" PANEL DIMENSIONS

A

D

Grille Panel

E

B

Freezer

Panel

Fresh

Food

Panel

C

PANEL DIMENSIONS

1/4" Backer Panel

.10" Space Panel

1/2" Overlay Panel

A B C D E

45 7/8" 9 1/2" 68 3/8" 18 9/16" 29 9/16"

45"

50"

8 5/8" 67" 17 9/16" 25 9/16"

11 3/16" 68 5/8" 20 7/8" 28 7/8"

FLUSH INSET INSTALLATION

HELPFUL TIPS

The 1/2" overlay panel must be secured to a .10" spacer panel and a 1/4" thick backer panel, which slides into the trim.

ASSEMBLE THE PANELS

WITH GLUE AND SCREWS:

• Center the spacer panel on the backer panel, left to right and top to bottom. Secure the panels with glue.

• Refer to the chart for locating the backer panel to the overlay panel. Secure the overlay panel to the backer panel with glue and screws. Screws must be countersunk into the backer panel.

MAXIMUM TOTAL PANEL

WEIGHT:

• Fresh food door panel – 75 lbs.

• Freezer drawer panel – 53 lbs.

• Grille panel – 18 lbs.

1/4" BACKER ASSEMBLY ROUTING DIMENSIONS

Hinge Side

C C Door

1/2"

Overlay

Panel

B

D

Freezer

Back

Backer with

Overlay Panel

Assembly

Fresh Food

Back

1/4"

Backer

Panel

.10"

Spacer

A A

D

B A

C

Grille Back

D

B

PANEL DIMENSIONS

A

Fresh Food Panel 2 1/16"

Freezer Panel

Grille Panel

2 1/16"

B

1/16"

1/16"

C

1/8"

1/8"

D

1/8"

1/8"

2 1/16" 2 1/16" 1 15/32" 7/32"

For questions about your appliance, please call 1-800-626-2000.

PAGE 12 OF 12 Product Specification Revised 8/21

advertisement

Related manuals

advertisement