Untitled - Customs
6
327
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
POWER COMMANDER V
•Full fuel and ignition timing control for each cylinder with a new smaller enclosure
•The REV Xtend feature increases stock rev limiter
•Switch betwen two maps “on the fly” and maps can be adjusted on a
“per gear” basis (one map per cylinder, per gear if required)
•Adjustment of fuel and timing based on engine temp is provided by the “Cold Start” feature
•Will power up with USB cable only for programming
NOTE: Not legal for sale or use on pollution controlled vehicles.
PART #
1020-0842
1020-0839
1020-0840
DESCRIPTION
For 09 FXST/FLST
For 09 XL 883
For 09 XL 1200
SUG. RETAIL
$369.95
369.95
369.95
PART #
1020-0841
1020-0843
1020-0844
DESCRIPTION
For 09 FLHT, FLHX, FLHR, FLTR
For 09 Dyna Glide
For 09 V-Rod
SUG. RETAIL
$379.95
369.95
369.95
1020-0839
EXHAUST
FUEL/AIR
SYSTEMS
66116002
ENGINE
TRANSMISSION
& DRIVELINE
53409060
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
328
DS-189152
POWER COMMANDER III USB
•USB (Universal Serial Bus) port provides an instant, problem-free
1020-0014
way to connect your Power Commander to a computer
•Provides precise information for fine-tuning a fuel-injected
43811130
motorcycle when changing an air filter, installing a new exhaust
system or doing additional engine performance modifications
•Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock;
Dynojet continuously maps new calibrations for each bike, which are available for downloading at their website (www.powercommander.com)
•If you do not have a computer, you can change the settings with three touch buttons on the faceplate
•OEM-style wiring connectors with improved harness protection are supplied; no wiring modifications required
•Includes easy-to-follow instructions
•Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment
•Features an expansion port for future add-on modules from Dynojet
•Software is compatible with Windows 98se/ME/2000/XP; opens all maps with .djm extension
•USB special cable and 9V battery power adapter are included
•Made in the U.S.A.
•Adapters allow you to activate a Power Commander for changing or altering maps while disconnected from the bike
•Professional adapter is ideal for service/parts department applications, consumer adapter is for limited use
NOTE: Not legal for sale or use on pollution controlled vehicles.
POWER COMMANDER III USB
PART #
DESCRIPTION
1020-0533
For 08 Twin Cam Touring models
1020-0286
For 07 Twin Cam Touring models
(w/ O2 eliminators)
1020-0001
For 02-06 Twin Cam Touring models
1020-0002
For 99-01 Twin Cam Touring models
1020-0005
For 97-98 Evolution Touring models
1020-0287
For 07-08 FXST/FLST (w/ O2 eliminators)
1020-0003
For 01-06 FXST/FLST
SUG. RETAIL
$379.95
369.95
359.95
359.95
359.95
369.95
359.95
PART #
1020-0534
1020-0291
1020-0004
1020-0288
1020-0218
1020-0006
1020-0290
1020-0289
DESCRIPTION
For 08 V-Rod™
For 07 V-Rod™
For 02-06 V-Rod™
For 07-08 Dyna Glide (w/ O2 eliminators)
For 06 Dyna Glide w/ O2 eliminators
For 04-05 Dyna Glide
For 07-08 XL883 (w/ O2 eliminators)
For 07-08 XL1200 (w/ O2 eliminators)
SUG. RETAIL
$369.95
369.95
359.95
369.95
369.95
359.95
369.95
369.95
POWER ADAPTERS/ CABLE
PART #
66116002
53409060
DS-189152
DESCRIPTION
Repl. USB consumer 9V battery power adapter
USB dual volt 110V/220V
professional power adapter
Serial port 9V adaptor (not for USB P.C.’s)
SUG. RETAIL
$14.95
PART #
43811130
1020-0014
DESCRIPTION
International plug adapter kit
Repl. USB special cable
SUG. RETAIL
$12.95
39.95
69.95
11.95
PALM ADAPTER
•In order to send maps from Palm Pilots to a Power Commander, a special adapter from Dynojet is required
•Adapter has been modified for use with the Palm Cradle or a Palm Hot Sync serial cable
•Dynojet Palm Software Map List is now available for download; Version 1 is freeware
•Maps can be sent to a Palm device from the Control Center software; the number of maps stored
is limited only by your Palm memory
PART #
DESCRIPTION
SUG. RETAIL
•Maps can also be sent from the Palm
DS-189146
Palm adapter
$9.95
to any PCII, PCIII and PCIIIr unit
NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information.
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
WINDSHIELDS
CALIFORNIA A.R.B. APPROVED POWER COMMANDER III USB-EX
•Provides virtually the same tuning functionality as the original Power Commander III USB
•Compatible with Tuning Link software
•Creates full fuel adjustability, fuel and ignition mapping and custom maps
•A built-in ignition module and ignition timing changes of up to +/- 10° are also incorporated
•Rev X-tend feature allows you to increase the stock rev limiter to 6200 rpm
•Maps created for Power Commander III USB can be loaded and will
automatically be converted to the proper format
•Will work with any exhaust system
•Increases torque and horsepower
PART #
DESCRIPTION
POWER COMMANDER USB-EX
1020-0751
For 08 Twin Cam Touring models
1020-0366
For 07 Twin Cam Touring models
1020-0372
For 02-06 Twin Cam Touring models
1020-0375
For 99-01 Twin Cam Touring models
1020-0378
For 97-98 Evolution models
1020-0367
For 07-08 FXST/FLST
1020-0373
For 01-06 FXST/FLST
1020-0752
For 08 V-Rod
1020-0371
For 07 V-Rod
1020-0376
For 02-06 V-Rod
1020-0368
For 07-08 Dyna Glide
SUG. RETAIL
$369.95
369.95
369.95
369.95
369.95
369.95
369.95
369.95
369.95
369.95
369.95
PART #
DESCRIPTION
POWER COMMANDER USB-EX (CONT)
1020-0374
For 06 Dyna Glide (w/ O2 eliminators)
1020-0377
For 04-05 Dyna Glide
1020-0370
For 07-08 XL883
1020-0369
For 07-08 XL1200
POWER ADAPTERS/CABLE
66116002
Repl. USB consumer 9V battery power adapter
53409060
USB dual volt 110V/220V
professional power adapter
43811130
International plug adapter kit
DS-189152
Serial 9V consumer battery power adapter
1020-0014
Repl. USB special cable
TOURING
LUGGAGE
SUG. RETAIL
$369.95
369.95
369.95
369.95
14.95
69.95
12.95
11.95
39.95
•Connects to any Power Commander USB via a “quick-disconnect” cable
•Designed to remain on the bike at all times, even in harsh weather
•Displays all available data from the Power Commander when connected
•Stores and switches between multiple maps in the on-board memory;
maps can be sent to the Power Commander “on the fly”
•Adjust maps using the controls on the display screen
•Logs data for later analysis
•Increase data storage for maps and logging by adding an SD Memory
Without multi function hub
With multi function hub
card; sold separately
•Can be easily removed from the bike to be programmed with a desktop computer
PART
#
DESCRIPTION
SUG. RETAIL
•USB programmable and upgradable
1020-0325
LCD display for Power Commander
$299.95
•Uses an active matrix TFT LCD 240 x 320 16-bit screen
EXHAUST
FUEL/AIR
SYSTEMS
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
1020-0326
•The Multi-Function Hub allows access to advanced expansion
features of the Power Commander USB
•Compatible with the LCD display,
but the display is not required
•Four separate functions can be
accessed with the Multi-Function Hub
•The Map Selection Switch (7/8” bar mount) allows the rider to
switch between two different maps in the Power
Commander. This allows a map for economy
and a separate map for performance
•The Gear Position/Speed function allows fuel and timing adjustments to be made depending on the
gear selected and the position of the throttle, up to +/-50% fuel and +/-10 degrees of timing
•Pressure input allows the fuel to be increased along with the boost level on turbocharged installations.
The change of boost level does not require a re-mapping of the Power Commander
•Relay outputs allow up to two warning lights or relays to be triggered independently to activate items
such as shift lights, nitrous systems, or air shifter. The trigger can be by throttle percent, rpm, or both
•Comes complete with installation instructions, wiring diagrams and CD with the required software updates
PART #
1020-0326
1020-0327
SEATS &
SISSY BARS
ENGINE
LCD DISPLAY ACCESSORY FOR
POWER COMMANDER III USB/USB-EX
MULTI-FUNCTION HUB ACCESSORY
FOR POWER COMMANDER USB/USB-EX
6
DESCRIPTION
Multi-Function Hub and wiring harness for Map Selection Switch only
Multi-Function Hub and wiring harness for Map Selection, Gear Position, Speed sensor, Pressure Input and two relay outputs
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
1020-0327
CABLES
BRAKES
SUG. RETAIL
$159.95
189.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
WIDE BAND COMMANDER
AIR/FUEL RATIO MONITOR
•Unlike current narrow band air/fuel ratio systems,
Dynojet’s Wide Band Commander module uses a Bosch 5-wire
LSU 4 wide band sensor that can read ratios from 10.0:1 to 18.0:1
•When installed, the Wide Band Commander provides
a 21/16” black- or white-faced 270° sweep electric air/fuel
ratio gauge with programmable warning light and
mounting hardware, plus data recording that can be
1020-0085
1020-0086
retrieved and analyzed with the supplied software package
•Software package requires Windows® SE/ME/2000/XP computer
•Onboard memory allows data to be logged, without using a laptop/PC, for download at a later time
•Log file data can be played back in the software, or exported as text
•Modular programmable for nitrous, water injection, timing retard and many other engine management options
•Single wire tach hookup; no tach adapter required
•Includes all required sensors, cables, software, 9V power adaptor and all installation materials; the most complete kit on the market
•Requires drilling hole in exhaust system to mount oxygen sensor
•18mm x 1.5mm oxygen sensor weld boss and plug included; when not powered,
PART #
DESCRIPTION
sensor must be removed and plug attached in mounting hole in exhaust system
1020-0085
Black w/ silver bezel gauge
•Dynolink compatible – allows Wide Band Commander to communicate with WinPEP7
1020-0086
White w/ black bezel gauge
•Exclusive website for software updates and technical tips: www.widebandcommander.com
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
SUG. RETAIL
$529.95
529.95
NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information.
All part numbers in BOLD MAGENTA are new for 2009.
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
329
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
1020-0538
FUELPAK
•Available in original version which is not legal for sale
in CA or new California A.R.B approved version
with all the same features as the original
•Throttle position sensor-based system simplifies
the process of fuel-injection tuning
•Enables you to fine-tune the fuel mixture throughout
the entire rpm range with the touch of a button
•Increases power and improves throttle response
•Very user friendly; plugs into the existing harness on the bike
•No computer or software is required, simply punch in the values supplied
with the Fuelpak
•Values supplied are for use with Vance & Hines exhaust systems
•Fuelpak will also work with other exhaust systems (contact V&H tech
support for tuning information)
•Includes all necessary mounting hardware
NOTE: Not legal for sale or use on pollution controlled vehicles.
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
NOTE: Requires the use of a high-performance air filter.
PART #
DESCRIPTION
ORIGINAL FUELPAK FOR 49 STATE USE
1020-0750
For 08 FXCW/C, 08 FLSTSB
1020-0360
For 01-06 FXST, 01-08 FLST
(except 07-08 FLSTF, 08 FLSTSB)
1020-0362
For 04-08 Dyna and 02-08 V-Rod models
1020-0568
08 FLHT, FLHR, FLHX, FLTR models
1020-0361
For 02-07 FLHT, FLHR, FLHX, FLTR models
1020-0538
For 07-08 XL, 07-08 FXST/B/C, SSE, 07-08 FLSTF
SUG. RETAIL
PART #
DESCRIPTION
CALIFORNIA A.R.B. APPROVED
1020-0823
For 08 FXCW/C, 08 FLSTSB
1020-0818
For 01-06 FXST, 01-08 FLST
(except 07-08 FLSTF, 08 FLSTSB)
1020-0820
For 04-08 Dyna and 02-08 V-Rod models
1020-0822
08 FLHT, FLHR, FLHX, FLTR models
1020-0819
For 02-07 FLHT, FLHR, FLHX, FLTR models
1020-0821
For 07-08 XL, 07-08 FXST/B/C, SSE, 07-08 FLSTF
SUG. RETAIL
$279.95
1020-0192
FI CONTROLLER
•Plug-in module offers three
user-selectable base fuel curves designed
to improve engine operation on fuel-injected models
•Can be configured to suit a wide variety of modifications
•Adjustments are made via three potentiometers that adjust the fuel
curve in the proper ranges for the application
•Fuel mixture can be enriched or leaned as required
•Uses factory connectors for easy installation – there is no PC required
for tuning or adjusting the fuel curves
•No modifications to the stock ECU
•Removing the FI controller returns vehicle to factory configuration
NOTE: Not legal for sale or use on pollution controlled vehicles.
279.95
279.95
279.95
279.95
279.95
$279.95
279.95
279.95
279.95
279.95
279.95
PART #
1020-0190
1020-0191
1020-0192
1020-0539
1020-0503
1020-0193
1020-0540
1020-0504
1020-0541
1020-0505
1020-0194
1020-0542
1020-0543
DESCRIPTION
For 97-98 FLHT, FLHR, FLTR models
For 99-01 FLHT, FLHR, FLTR models
For 02-05 FLHT, FLHR, FLTR models
For 07 FLHT, FLHR, FLHX, FLTR models
For 06 FLHT, FLHR, FLHX, FLTR models
For 01-05 FXST/FLST, 04-05 Dyna Glide
For 07 FXST/FLST
For 06 FXST/FLST
For 07 Dyna
For 06 Dyna
For 02-07 V-Rod models
For 07 XL 883
For 07 XL 1200
SUG. RETAIL
$248.95
248.95
248.95
259.95
248.95
248.95
259.95
248.95
259.95
258.95
248.95
259.95
259.95
CABLES
BRAKES
1020-0828
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
330
BIG SHOT™
ADJUSTABLE
FUEL INJECTION TUNER
1020-0309
•A load-based fuel injection module; does not require splicing
or modifications to motorcycle during installation
•Comes pre-loaded with base maps for different models which can then
be fine tuned to individual riding style and bike
•Laptops and dyno machines are not required during tuning
to maximize performance
•Utilizes the latest in load-based technology in fuel injection performance
•Detects the exact amount of load on the engine at any RPM and any
road speed; delivers the perfect amount of fuel to the engine for
optimum performance
•A superior design over fuel injection modules that work off
throttle position
NOTE: Not for
PART #
1020-0310
1020-0770
1020-0531
1020-0309
1020-0311
1020-0771
1020-0312
1020-0530
sale in California.
DESCRIPTION
For 06 FXST/FLST/FLT models
For 08-09 FLT models
For 07 Big Twin and 08 FXST/FLST/FXD models
For 95-05 Big Twin models
For 06 Dyna models
For 08 V-Rod models
For 02-07 V-Rod models
For 07-08 XL models
SUG. RETAIL
$251.95
300.95
300.95
251.95
300.95
300.95
251.95
300.95
“CHEAP SHOT” FUEL TUNER
•An economical solution to add needed fuel after
installing exhaust and air cleaner performance upgrades
•Simple splice-in design saves money by eliminating
costly plug-and-play connectors
•Load-based technology senses load on the engine in
any riding situation to provide optimal fuel to the engine
•Adjusts like a carburetor
•Installation instructions included
NOTE: Not for sale in California.
PART #
1020-0829
1020-0828
1020-0831
1020-0830
DESCRIPTION
For 06-09 Dyna, 07-09 Big Twin
For 95-06 Big Twin (except 06 Dyna)
For 08 V-Rod
For 02-07 V-Rod
SUG. RETAIL
$151.95
151.95
151.95
151.95
NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information.
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FI2000R PLUG-IN FUEL PROCESSOR
•Proven Fi2000R comes with leads that snap directly into the bike’s injector bodies
•Standard open-loop design for 06 Dyna and all 07-08 models can use exhaust systems that do or do not have O2 sensor bungs
•More advanced tuning for modified bikes
•Think of third tuning pot as an electronic main jet while thinking of the entire Fi2000R as a digital jet kit
•Full range of fuel adjustment (0-10 settings) across all rpm ranges
•Three easy identifiable lights: green – Fi2000 is adding more fuel to the air/fuel ratio approx. 14:1; Green and yellow lights – these lights will be on in
unison when throttle is open more quickly and air/fuel mixture is approx. 12.5:1; Red – light comes on and stays on as long as the Fi200 follows the fuel
curve while adjusting to approx. 12.8:1 air/fuel ratio, which is where the engine will produce its best full-throttle power
•Step-by-step instructions
•Improves rideability by smoothing out the powerband and giving the bike more throttle response
•Corrects lean air/fuel mixture problems; eliminates overheating, backfiring on deceleration, hesitation on acceleration or an uneven cruising rpm
•Waterproof circuit board
•No fuel map adjustments or computer downloads required
NOTE: Standard models not legal for operation on public highways in the state of California.
PART #
STANDARD
1020-0301
1020-0544
1020-0206
1020-0095
1020-0561
1020-0304
1020-0204
1020-0093
1020-0306
DESCRIPTION
For
For
For
For
For
For
For
For
For
SUG. RETAIL
07-08 FXST/FLST and 06-08 Dyna Glide
08-09 FXCW/FXCWC
06 FXST/FLST
01-05 FXST/FLST and 04-05 Dyna Glide
08-09 FLHT, FLHR, FLTR, FLHX
07 FLHT, FLHR, FLTR, FLHX
06 FLHT, FLHR, FLTR, FLHX
95-05 FLHT, FLHR, FLTR, FLHX
07-09 XL
$249.95
249.95
249.95
249.95
249.95
249.95
249.95
249.95
249.95
PART #
DESCRIPTION
STANDARD (CONT)
1020-0626
For 08-09 V-Rod
1020-0094
For 02-07 V-Rod
1020-0341
Repl. O2 Sensor Eliminator kit
CALIFORNIA
1020-0549
For 06 FXST/FLST
1020-0550
For 01-05 FXST/FLST and 04-05 Dyna Glide
1020-0548
For 06 FLHT, FLHR, FLTR, FLHX
1020-0546
For 95-05 FLHT, FLHR, FLTR, FLHX
1020-0547
For 02-07 V-Rod
SUG. RETAIL
$249.95
249.95
35.95
249.95
249.95
249.95
249.95
249.95
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
FI2000R O2
FUEL PROCESSOR
TANKS &
OIL FILTERS
•The Fi2000 O2 digital fuel processor is
designed to work with all H-D exhaust
systems (stock or aftermarket) equipped with
oxygen sensors in place (closed-loop design)
•Works much like a carburetor jet kit with adjustments similar to the
air-mixture screw, the needle and clip positions and the main jet
•The Fi2000 increases horsepower and torque by optimizing stock lean air/
fuel mixtures (helps cool the engine temps as well)
•Quick and simple installation with plug-and-ride technology with OEM-style connectors
•No confusing computer downloads to install
•No expensive dyno testing required
•Pre-configured from the factory for your make and model,
but easy to adjust should your specific application need it
•Improves overall rideability
•Virtually eliminates backfiring on deceleration
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
NOTE: Standard models not legal for operation on public highways in the state of California.
STD. PART #
STANDARD
1020-0303
1020-0545
1020-0302
1020-0314
1020-0562
1020-0305
1020-0307
1020-0628
DESCRIPTION
For
For
For
For
For
For
For
For
SUG. RETAIL
07-09 FXST/FLST
08-09 FXCW/FXCWC
07-09 Dyna Glide
06 Dyna Glide
08-09 FLHT, FLHR, FLTR, FLHX
07 FLHT, FLHR, FLTR, FLHX
07-09 XL
08-09 VSCR V-Rod
$279.95
279.95
279.95
279.95
279.95
279.95
279.95
279.95
STD. PART #
CALIFORNIA
1020-0553
1020-0558
1020-0552
1020-0556
1020-0564
1020-0555
1020-0560
1020-0629
DESCRIPTION
For
For
For
For
For
For
For
For
07-09 FXST/FLST
08-09 FXCW/FXCWC
07-09 Dyna Glide
06 Dyna Glide
08 FLHT, FLHR, FLTR, FLHX
07 FLHT, FLHR, FLTR, FLHX
07-09 XL
08-09 VSCRA/B/R V-Rod
SUG. RETAIL
$279.95
279.95
279.95
279.95
279.95
279.95
279.95
279.95
NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information.
All part numbers in BOLD MAGENTA are new for 2009.
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
331
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
TCFI3
AUTO-TUNE FUELINJECTION SYSTEM
•Simultaneously auto-tunes
fuel curves for front and
rear cylinders under actual
riding conditions with new
WEGO IIID dual-channel wideband oxygen sensor interface
•Fully programmable
plug-in replacement
for Delphi® controller
•Robust alpha-N (throttle position
and rpm-based) fuel control
eliminates problems with long
duration/high overlap camshafts
•Full support for SAE J1850 data bus
used on 04-08 models (except 08 touring
models with electronic throttle control) for
communications between the engine control
1021-0006
module, instrument cluster, turn signal/security
module and diagnostic scan tools
•Support for sixth gear indicator on 07-08 models
•TCFI also has built-in data logging that stores data for the last 60
minutes of operation at 10 samples per second
•PC communications is by means of a USB interface that plugs directly into the
existing H-D diagnostic connector
•Powerful Windows software for custom
programming and extended data logging and diagnostics
•User programs a table with the desired air/fuel
ratio and the system does the rest – no dyno tuning required
•Idle air control including idle rpm and cold start characteristics are fully programmable,
which facilitates use of aftermarket throttle bodies with higher airflow
•Kit includes TCFI fuel-injection controller, WEGO IIID dual-channel wide-band oxygen sensor interface,
two Bosch LSU 4.2 wide-band sensors for front and rear cylinders, USB interface for PC Link, software and two 18 x 1.5mm weld nuts for exhaust pipe
NOTE: Not legal for sale or use on pollution-controlled vehicles.
PART #
DESCRIPTION
TFCI3 AUTO-TUNE FUEL-INJECTION SYSTEM
1021-0006
For 01-08 Twin Cam w/ Delphi® EFI system (exept 08 Touring models w/ electronic throttle body)
REPLACEMENT COMPONENTS FOR TCFI II FUEL-INJECTION CONTROLLER
1022-0008
Repl. WEGO II oxygen sensor
7806-1563
18 x 1.5mm weld nut (for mounting sensor to exhaust pipe) (ea.)
7806-1564
18 x 1.5mm hex socket plug (for plugging 18 x 1.5 hole after tuning) (ea.)
SUG. RETAIL
$874.95
112.95
5.95
5.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
332
TWIN TUNER
FUEL-INJECTION CONTROLLER
•Allows easy adjustments to OEM Delphi
fuel-injection systems to improve performance
and match the requirements of performance parts
•Mode and up/down pushbutton switches
make fuel trim adjustments in the RPM and
throttle position ranges required by most
applications; fuel trim value is displayed on
a bright daylight-readable LED display
•Advanced mode (using optional USB Interface
PART #2101-0075 and PC Link Tuner software)
1020-0358
allows precise fuel adjustments and independent
adjustments to the front and rear cylinders
•Can use DynoJet Power Commander maps
•Easy plug-in installation and setup
•Compact size – only 4” L x 2” W x 1/2” H
•Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and
ride the bike, then copy the air/fuel ratio corrections calculated by the
Twin Scan II+ into the PC Link Tuner software
NOTE: Not legal for sale on use on pollution-controlled vehicles.
PART #
DESCRIPTION
1020-0358 For 01-09 Big Twin w/ 36-pin Delphi EFI
(except 08-09 Touring models w/ electronic
throttle control) and 08-09 Buell XB,
1125R w/ DDFI fuel-injection system
1020-0834 For 99-07 Buell w/ DDFI fuel-injection system
SUG. RETAIL
$217.95
217.95
NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information.
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
6
WINDSHIELDS
TWIN TUNER EX
•Allows easy adjustments to OEM Delphi fuel-injection systems to
improve performance and match the requirements of
performance parts
•50-state street legal (ARB E.O. D-641) – fuel adjustments with the
Twin Tuner EX are only allowed above 60% throttle position
or 5000 rpm
•Mode and up/down pushbutton switches make fuel trim
adjustments in the RPM and throttle position ranges required by
most applications; fuel trim value is displayed on a bright
daylight-readable LED display
•Advanced mode (using optional USB Interface PART #2101-0075
and PC Link Tuner software) allows precise fuel adjustments and
independent adjustments to the front and rear cylinders
•Can use DynoJet Power Commander maps
•Easy plug-in installation and setup
•Compact size – only 4” L x 2” W x 1/2” H
•Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin
Scan II+ into the PC Link Tuner software
PART #
1020-0835
DESCRIPTION
For 01-08 Big Twin w/ 36-pin Delphi EFI (except 08 Touring models w/ electronic throttle control)
and 08-09 XB, 1125R Buell w/ DDFI fuel-injection system
SUG. RETAIL
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
$217.95
ENGINE
USB INTERFACE
TRANSMISSION
& DRIVELINE
•Interfaces all Daytona Twin Tec engine controls (ignition and fuel injection
systems) to USB port on newer laptops
•Includes all required adapters for PART #s DS-242372, DS-242374,
DS-242375, DS-242377 and 2101-0034 ignitions and 1021-0001, 1021-0002,
1021-0004, 1021-0005 and 2101-0076 fuel injection systems
•Compatible with all Daytona Twin Tec software and Windows 98/MN/XP
(updated software drivers included on CD-ROM)
•Includes 6’ USB cable
•USB interface allows you to connect to laptops with no serial port,
and to multiple engine controls; no need for multiple cables or separate
USB adapters
•A switch activates operation, with one position for TC88 and the second
position for all other engine control products
•Includes a connector that mates with the four-terminal Deutsch data link
connector on 99-up Twin Cam 88 models, as well as adapters for earlier Shovelhead and Evolution applications
GASKETS
& SEALS
ELECTRICAL
LIGHTING
NOTE: Not compatible with Twin Scan 88 and WEGO II systems, which require a separate adapter.
PART #
2101-0075
DESCRIPTION
For all Daytona Twin Tec engine controls
SUG. RETAIL
$99.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
TERMINAL VELOCITY III
FUEL MANAGEMENT SYSTEMS
1020-0773
•Maximizes performance while decreasing emissions
and fuel consumption
•Horsepower and torque increases
•Automatically re-calibrates for modifications made to the
motorcycle such as aftermarket exhaust, air cleaner, etc.
•Adjusts as you ride, compensates for changes in engine load conditions
•Available for Delphi, Magneti-Marelli ECU systems and 08-09
throttle-by-wire models
•Works in conjunction with the factory closed-loop system; some
applications use factory O2 sensors (see chart), other applications include
O2 sensor
•Quick-connect plugs for easy installation
•Works with factory and race tuner downloads
NOTE: Not for sale or use on California emission-equipped motorcycles.
PART #
DESCRIPTION
SUG. RETAIL
1020-0773 For 01 FXST, all 02-04 EFI models, 02-07 V-Rod;
flat plug/TPS and includes one O2 sensor
$499.95
1020-0774 For 05-06 FXST, 05-06 FLHT/FLHR/FLTR;
499.95
round plug/TPS and includes one O2 sensor
1020-0775 For 95-01 models w/ Magnetti-Marelli EFI;
499.95
flat plug/TPS and includes one O2 sensor
1020-0776 For 07-09 FXST, 06-09 Dyna, 07 FLHT/FLHR/FLTR/
499.95
FLHX; round plug/TPS and uses factory O2 sensors
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
PART #
1020-0777
1020-0778
1020-0779
2130-0009
2404-0059
DESCRIPTION
SUG. RETAIL
For 08-09 FLHT/FLHR/FLTR/FLHX; 6-pin oval plug/
TPS and uses factory O2 sensors
$499.95
For 07-09 XL; flat plug/TPS and uses
499.95
factory O2 sensors
For 08-09 V-Rod (all), flat plug/TPS and uses
499.95
factory O2 sensors
Repl. O2 sensor (ea.)
104.95
Repl. O2 bung (ea.)
15.95
NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information.
All part numbers in BOLD MAGENTA are new for 2009.
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
333
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
EZFI TUNER
•Add-on module is perfect for tuning situations that require
just a little tweaking: only affects fuel delivery (not stock
ECM/TSSM functions such as ignition timing, turn signals,
safety, instruments, etc.)
•Connects to stock ECM for most stock engines
•Includes software and instructions
•Optional diagnostic cable available
1020-0570
1020-0569
NOTE: Since the EZFI module does not control ignition timing, it is not
recommended for engines over 96” cubic inches with higher than stock
compression ratios.
NOTE: Not legal for sale or use on pollution controlled vehicles.
SEATS &
SISSY BARS
PART #
DESCRIPTION
FOR ALL 01-07 DELPHI EFI-EQUIPPED BIG TWIN MODELS
1020-0569
EZFI module kit
SUG. RETAIL
$229.95
PART #
DESCRIPTION
SUG. RETAIL
FOR ALL 01-07 DELPHI EFI-EQUIPPED BIG TWIN MODELS (CONT)
1020-0570
Diagnostic cable
$104.95
EXHAUST
FUEL/AIR
SYSTEMS
1020-0323
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
1020-0836
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
334
1020-0532
THUNDERMAX ECM WITH AUTO-TUNE CLOSED LOOP SYSTEM
1022-0039
•ThunderMax ECM with Auto-Tune module mounts conveniently in
place of the factory ECM and plugs in to the existing harness
•Maps, software and firmware updates available on line at no charge
•Quickly find the best map for your application using SmartLink Map Filters
•With the Auto-Tune, AFR tuning for component and exhaust changes are self-adjusting – simply install,
download a map and ride while Auto-Tune maintains target AFR in all conditions
•Includes ThunderMax ECM and Auto-Tune Module, plug-in harness and two wide band sensors,
SmartLink Software and communication cable,
Quick-Start Easy Install and Comprehensive User’s Manual, technical support and free software and updates
•Select and install a matching base map and enjoy the efficiency of a balanced fuel curve for throttle response like youíve never imagined
•No extensive dyno tuning required for most models
•Alpha-N design unaffected by long duration camshafts
•Replaces factory ECM – easy plug-in installation and set-up
•Simple adjustable rev limit, idle, speedo calibration and decel pop control settings
•Easily adjust fuel, ignition timing and cold start maps
•Supports nitrous and supercharger applications
•Versatile – plug and ride or live-tune a custom application
•Logs engine starts, engine temperatures and total hours
of operation time in 100 RPM increments
SUG.
•Read diagnostic codes through software or traditional methods
PART #
DESCRIPTION
RETAIL
•Record live data during riding or tuning sessions;
1020-0323
For 01-09 Big Twin models w/
choose replay speed for data analysis
Delphi EFI (except 08-09 Touring models)
$899.95
•ThunderMax includes SmartLink Software and cable for easy PC tuning,
1020-0836
For 08-09 FLT, FLHR, FLHX and FLTR models
989.95
maps for popular engine combinations and Quick-Start Easy Install
1020-0817
For 02-09 V-Rod models
899.95
and Comprehensive User’s Manual
1020-0532
For 07-09 XL models
899.95
NOTE: Legal in California only for racing vehicles which
1022-0039
Repl. oxygen sensor (ea.)
107.95
may never be used upon a highway.
NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information.
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
6
WINDSHIELDS
TOURING
THUNDERMAX 50
•California ARB-legal (Executive Order #D-644) complete replacement engine management system
for all 01-06 88 cu. in. Delphi®-equipped EFI model Harleys
•ThunderMax 50 converts these open-loop EFI bikes to a feedback system that
automatically corrects air fuel ratios through the use of wide-band oxygen
sensors and the ThunderMax AutoTune module
•This system allows continuous AFR tuning, keeping the engine at the specified air fuel ratio
regardless of the changes in ambient conditions or terrain the vehicle is being operated in
– without tuning on a dynamometer
•Features increased torque and power over the stock system and maintains excellent fuel economy
•System properly self-tunes aftermarket exhaust systems
•Adjustable rev limiter
•Provides access to read vehicle diagnostic trouble codes
PART #
1020-0837
DESCRIPTION
For 01-06 Softail, 04-05 Dyna and 02-06 Touring models
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
SUG. RETAIL
$899.95
FUEL/AIR
SYSTEMS
THUNDERMAX EFI AUTO-TUNE MODULE
•Interfaces with the ThunderMax ECM to provide real-time data of the air/
fuel ratio read by wide-band oxygen sensors installed in the exhaust system
•Data is processed in milliseconds by the ThunderMax, which makes instant adjustments to
maintain the front and rear cylinder air/fuel ratios specified by the SmartLink software,
creating a self-tuning system
•Modular design attaches directly to the ThunderMax ECM, eliminating any mounting hassles
•Allows ThunderMax ECM owners (version 4.0 and higher) to add true wide-band
closed-loop automatic tuning
•System fits all 01-08 EFI Harley-Davidson models equipped with ThunderMax (V.4+)
ECM (PART #1020-0321)
•Requires exhaust system fitted with bungs for oxygen sensors
•Allows the user to program the desired air/fuel ratio for maximum power,
maximum economy or anywhere in between
•Targets specific AFRs, which adjust as you ride
•Includes two wide-band oxygen sensors
•No splicing required, system simply plugs into the factory wiring
harness for total closed-loop functionality
•Special Feature – you can view live air/fuel ratios without a
computer link by using a ThunderMax digital speedometer
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
NOTE: Legal in California only for racing vehicles which may never be used upon a highway.
PART #
1020-0322
DESCRIPTION
Thundermax EFI Auto-Tune Module
SUG. RETAIL
$413.95
HANDLEBARS,
CONTROLS
& MIRRORS
THUNDERMAX ECM
•Open loop system allows you to take control of your EFI-equipped motorcycle
•Maps, software and firmware updates available on line at no charge
•Quickly find the best map for your application using SmartLink Map Filters
•Includes ThunderMax ECM, SmartLink Software and communication cable, Quick-Start Easy Install
and Comprehensive Users Manual, technical support and free software and updates
•Select and install a matching base map and enjoy the efficiency of a balanced fuel curve for
throttle response like you’ve never imagined
•Alpha-N design unaffected by long duration camshafts
•Replaces factory ECM, easy plug-in installation and set-up
•Simple adjustable rev limit, idle, speedo calibration and decel pop control settings
•Easily adjust fuel, ignition timing and cold start maps
•Supports Nitrous and Supercharger applications
•Versatile – plug and ride or live-tune a custom application
•Logs engine starts, engine temperatures and total hours of operation time in 100 RPM increments
•Read diagnostic codes through software or traditional methods
•Record live data during riding or tuning sessions; choose replay speed for data analysis
•ThunderMax includes SmartLink Software and cable for easy PC tuning, maps for popular engine
combinations and Quick-Start Easy Install and Comprehensive User’s Manual
•Expandable to “closed loop” with available ThunderMax Auto-Tune module
NOTE: Legal in California only for racing vehicles which may never be used upon a highway.
PART #
DESCRIPTION
1020-0321
For 01-09 w/ Delphi EFI (except 08-09 Touring models)
LIGHTING
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
SUG. RETAIL
$485.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
THUNDERMAX PIGTAIL HARNESS
TIRES,
TUBES &
WHEELS
•Allows a second port for the communication
cable connection to the ThunderMax
•It is installed to the bike’s wiring harness at the 36-pin ECM
connector (connection requires harness plug disassembly;
two terminated wires are inserted into two unused ports
in the 36-pin connector, and a ground wire added)
•Handy for motorcycle models with tight clearances around the ECM such
as Dyna, Softail Rocker and 02-05 V-Rod models
NOTE: Requires ThunderMax ECM with serial number 114000 or higher
(produced beginning August 2008). Will not work on previous
model ThunderMax ECM
HARDWARE,
CHEMICALS
& TOOLS
PART #
1022-0059
DESCRIPTION
ThunderMax pigtail harness
SUG. RETAIL
$18.95
NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information.
All part numbers in BOLD MAGENTA are new for 2009.
COVERS,
SECURITY
& GENERAL
335
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
1050-0001
1022-0037
1010-0015
1020-0027
EXHAUST
THUNDERJET® EFI THROTTLE BODIES AND MANIFOLDS
FUEL/AIR
SYSTEMS
ENGINE
•Replaces the OEM throttle body and manifold
•Throttle bodies accept the OEM stock components, including injectors
•Matching manifolds are available separately for various cylinder lengths
•High-flow air cleaner assembly is also required (sold separately)
•Air cleaner assembly PART #1010-0015 accepts air cleaner covers
PART #DS-288949 and PART #DS-288951 (sold separately)
NOTE: Will also fit round port Screamin’ Eagle heads.
1010-0268
NOTE: Legal in California only for racing vehicles which may never be used upon a highway.
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
SUG.
RETAIL
PART #
DESCRIPTION
FOR 06-09 DELPHI-EQUIPPED TWIN CAM (EXCEPT 08-09 DRESSER)
1022-0037
54mm throttle body/manifold assembly
$599.95
1022-0038
60mm throttle body/manifold assembly
599.95
FOR 01-05 DELPHI-EQUIPPED TWIN CAM
1020-0027
50mm throttle body
399.95
1020-0028
54mm throttle body
399.95
1050-0001
Manifold for 4.937” length cylinders (stock length)
199.95
1050-0002
Manifold for 5.013”-5.016” length cylinders
199.95
SUG.
PART #
DESCRIPTION
RETAIL
AIR CLEANER ASSEMBLIES FOR ALL THUNDERMAX EFI THROTTLE BODIES
1010-0015
Accepts 8” round Evolution-style cover
(cover not included)
$239.95
1010-0268
Accepts OEM Twin Cam “football” cover
(cover not included)
217.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
1010-0236
CABLES
1050-0151
BRAKES
1022-0025
1022-0029
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
336
1022-0024
1022-0026
54MM SINGLE-BORE THROTTLE BODIES/
MANIFOLDS/AIR CLEANERS
•Designed for riders seeking the greatest possible
performance gains from their fuel-injected engines
•By utilizing air column inertia and carefully timed gas
dynamic pressure waves, the S&S VFI Tuned Induction
systems ram additional air into the cylinders for
increased mid-range torque
•For maximum tunability and performance gains an S&S Variable
Fuel-Injection (VFI) module is recommended (sold separately),
but any compatible, programmable module with enough capability
and tuning range can be used
•Components must be purchased separately to
complete a Single-Bore EFI assembly
PART #
DESCRIPTION
SUG. RETAIL
THROTTLE BODIES
1022-0029
For stock 01-05 EFI Big Twin and aftermarket
models (Delphi-style)
$740.95
1022-0030
For stock 95-01 EFI Big Twin and aftermarket
models (Magneti-Marelli-style)
899.95
MANIFOLDS
1050-0151
For 80”, 88”, 89”, 95”, 96”, 103” and 106” motors
125.95
1050-0152
For 116” motor
125.95
TEARDROP AIR CLEANERS
1010-0236
Desperado style
205.95
1010-0237
Teardrop style
205.95
1011-0898
1022-0028
PART #
DESCRIPTION
TUNED INDUCTION AIR CLEANERS
1022-0024
Natural
1022-0025
Black
1022-0026
Chrome
TUNED INDUCTION AIR CLEANER BRACKET KIT
1022-0028
For 95-05 EFI Big Twin models
REPLACEMENT PARTS
DS-289408
Teardrop-style air filter
1011-0897
Repl. VFI-style air filter, red (ea.)
1011-0898
Repl. VFI-style air filter, blue (ea.)
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$246.95
267.95
334.95
385.95
17.95
48.95
48.95
SECTION
1022-0044
6
WINDSHIELDS
TOURING
1022-0040
1013-0003
LUGGAGE
1022-0020
0706-0036
SEATS &
SISSY BARS
WILD THINGS™ THROTTLE BODY AND MANIFOLD
1022-0015
BIG BORE
THROTTLE BODIES
•Increase airflow by
35-88% over stock
•Accept OEM components
•Include matching intake manifold
•Satin finish; sold each
NOTE: Magneti Marelli throttle bodies
require the use of a Delphi-style air cleaner.
NOTE: Contact Speed’s Performance Tech Support for
tuning information.
PART #
DESCRIPTION
SUG. RETAIL
FOR 06-09 DELPHI FUEL INJECTED TWIN CAM MODELS
(EXCEPT 08-09 DRESSERS)
1022-0040
51mm
$899.95
1022-0041
55mm
899.95
FOR 01-05 DELPHI FUEL INJECTED TWIN CAM MODELS
1022-0010
48mm
899.95
1022-0011
51mm
899.95
FOR MAGNETI MARELLI FUEL
INJECTED BIG TWIN MODELS
1022-0014
48mm
950.95
1022-0015
51mm
950.95
•Let that engine breathe
•Huge, 57mm straight-bore throttle body and high-flow
manifold gives big increases in horsepower
•All stock components bolt on to throttle body without modification
•Uses the same air cleaner bolt pattern as stock
•Allows use of stock cruise control
•Require the use of throttle body accessories when installing a
Wild Things throttle body and manifold
•Re-shaped steel fuel supply tube for Softail models
•Manifold spacer kit available for Dresser and Road King models
•New split-flow high-volume fuel flow nozzles divide the
fuel flow around the valve stem and guide
•Directs fuel into the highest flow areas for the ultimate in fuel distribution
•Flow enough fuel to feed even the nastiest street motors
•Nozzles can be used for stock 06-09 applications with 50mm throttle bodies
•PART #1022-0044 requires purchasing Kuryakyn intake flanges
Part #467 (available seperately from Kuryakyn)
•Sold each
•Engineered by Mike Roland
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
PART #
DESCRIPTION
SUG. RETAIL
FOR 06-09 TWIN CAM DELPHI FUEL-INJECTED MODELS (EXCEPT 08-09 FLHT/FLHR/FLTR/FLHX)
1022-0044 Wild Things™ throttle body for stock intake ports
$699.95
FOR 01-05 TWIN CAM DELPHI FUEL-INJECTED MODELS
1013-0003 Wild Things™ throttle body and manifold for stock intake ports
595.95
1022-0019 Wild Things™ throttle body and manifold for 1.8” intake ports
599.95
WILD THINGS™ THROTTLE BODY ACCESSORIES
1022-0043 57mm high-flow fuel injection nozzles for 06-09 Twin Cam w/ Wild
Things™ throttle body, 06-09 Twin Cam w/ stock throttle body or
Screamin’ Eagle 50mm throttle bodies
79.95
1022-0056 Wild Things intake flanges for 99-05 Twin Cam
79.95
0706-0036 Steel fuel supply tube for 01-05 Softail
9.95
1022-0020 Spacer kit for 02-05 Dresser and Road King models
39.95
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
1022-0046
CABLES
BRAKES
GAS IT FUEL INJECTION KIT
1022-0047
1022-0048
QUICK-RESPONSE THROTTLE
BODY AND MANIFOLD KITS
•Replace OEM throttle body and manifold
•Provide quicker throttle response through elliptical intake track design
•Wider manifold to fit most taller engines
•Compatible with all OEM electrical components, including throttle
position sensors, air control motors and fuel injectors
•Available with or without electronic components
(MAP sensor, fuel rails and injectors)
NOTE: Not compatible with 08-09 FLHT/FLHX/FLHR/FLTR models with
electric throttle control.
FOR 06-09 DELPHI EFI THROTTLE CABLE-STYLE BIKES
W/ 100”-131” TWIN CAM MOTORS
PART #
DESCRIPTION
KITS W/O ELECTRONIC COMPONENTS
1022-0050
62mm throttle body/manifold
1022-0048
58mm throttle body/manifold
KITS W/ ELECTRONIC COMPONENTS
1022-0049
62mm throttle body/manifold
1022-0047
58mm throttle body/manifold
SUG. RETAIL
kit
kit
$827.95
775.95
kit
kit
1,883.95
1,765.95
TANKS &
OIL FILTERS
•Allows the use of wild custom fuel tanks
on 01-05 fuel-injected Delphi models
•Relocates stock fuel pump, fuel pressure
regulator, fuel filter and fuel level sending unit
to underside of fuel tank (not included)
•Includes steel weld-in plate, 3.75” x 8”
aluminum manifold, all hardware
and instructions
•Tank bottom must be relatively flat
to accommodate port installation
•Requires vented tank or vented gas cap
•Custom fabrication required
•Made in the U.S.A.
PART #
1022-0046
DESCRIPTION
Gas It fuel injection kit
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
SUG. RETAIL
$399.95
IF STARTING FROM SCRATCH, PURCHASE ALL OF THE FOLLOWING
COMPONENTS FROM YOUR LOCAL H-D DEALER FOR 01-05 DELPHI SYSTEMS
OEM PART #
DESCRIPTION
27408-01
Fuel pressure regulator
61001-01
Fuel filter kit, includes clamps, o-ring, and hose.
62357-00
Fuel hose, fuel pump to filter
10222
Fuel hose clamps
75300-05
Fuel sender kit
72439-00B
Connector assembly kit w/connector kit
62897-01B
Pump assembly
62900-01B
Fuel line, tank to intake
62189-01A
Check valve assembly w/O-ring
All part numbers in BOLD MAGENTA are new for 2009.
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
337
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
•Reduce your engine’s
temperature between
20 and 30 degrees
•Designed to change
AFR from 14.6:1 to 14.2:1
•Installs in a few minutes;
simply plug in between the
oxygen sensors and the OEM wiring harness
•Recommended for models with
high flow air intakes and exhausts
•Sold in pairs
PART #
1020-0796
DESCRIPTION
06 Dyna and all
07-09 models
VFI CLOSED-LOOP
SENSOR KIT
FUEL PUMP FOR
FUEL-INJECTED CUSTOM BIKES
O2 ENRICHMENT DEVICE
•Pump can be mounted in nearly any tank
•Hollow mounting bolts secure the pump flange
to the bottom of the tank and provide an
outlet for wiring and pressurized fuel
•In-tank fiber filter prevents contaminants from
damaging the pump or clogging fuel injectors
•Kit contains pump, in-tank filter, inlet hose,
mounting hardware and instructions
•Pump specifications: 55 psi, 17.7 gal/hr, 3A draw
SUG. RETAIL
PART #
1009-0007
$111.95
DESCRIPTION
Fuel-injected fuel pump
for custom applications
SUG.
RETAIL
•Owners of existing S&S
engines equipped with a
Delphi®-style VFI system can
update to closed-loop operation by updating
their module software via a download at the
S&S website and then installing
this closed-loop sensor kit
•Kit includes two oxygen sensors, two
weld-in exhaust bosses, an oxygen sensor
wiring sub-harness, all required connectors
and instructions
PART #
1020-0824
$565.95
SUG. RETAIL
$304.95
DS-189001
DS-289144
DS-289284
DESCRITION
For 01-06 Delphi-style
VFI modules
GASKETS
& SEALS
DS-289143
ELECTRICAL
2103-1001
DS-289285
DS-289142
2103-1002
1022-0021
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
ELECTRONIC
FUEL-INJECTION COMPONENTS
•All parts are OEM replacements
•Check OEM parts manual for
fitment and part number
PART #
INJECTORS
DS-289142
1022-0004
DESCRIPTION
SUG. RETAIL
95-98 FLT models; repl.
OEM #27218-95 (21 lb. per hour)
DS-289284 01-05 FXST, FLST, 02-05 FLT and 04-05 Dyna
models; repl. OEM #27609-01 (32 lb. per hour)
2103-1001 99-01 FLT models (optional high flow,
31 lb. per hour)
1022-0009 01-05 FXST, FLST, 02-05 FLT and
04-05 Dyna models; repl. OEM #27609-01
(high flow, 47 lb. per hour)
FUEL REGULATOR
1009-0005 95-99; repl. OEM #27219-95 (350 kPa)
DS-289143 95-99; repl. OEM #27219-95 (300 kPa)
AIR TEMPERATURE SENSOR
DS-289144 95-05; repl. OEM #27270-95
ENGINE TEMPERATURE SENSOR
DS-289285 99-09; repl. OEM #32446-99
BAROMETRIC PRESSURE SWITCH
1022-0018 95-98; repl. OEM #32424-95 (250 kPa)
DS-189001 95-98; repl. OEM #32424-95 (100 kPa)
$117.95
137.95
244.95
192.95
76.95
60.95
40.95
1022-0022
1050-0039
PART #
DESCRIPTION
THROTTLE POSITION SENSOR
2103-1002 01-05 FXSTI, FLSTI, FXSTDI, 02-05 FLT, FLHT and
04-05 Dyna models; repl. OEM #27629-01
1022-0021 06-09 Dyna, FXST, FLST and FLHT models;
repl. OEM #27659-06
IDLE AIR CONTROL MODULE
1022-0004 01-05 FXSTI, FXSTSI, FXSTBI, FXSTDI, FLSTI, FLSTFI,
02-05 FLTRI, FLHRI, FLHRCI, FLHTCUI, 04-05 Dyna
and 02-09 VRSC models; repl. OEM #27628-01
1022-0022 06-09 Dyna, FXST, FLST and
06-07 FLHT models; repl. OEM #27658-06
MAP SENSOR WITH SEAL
1050-0039 99-09 fuel-injected models
(except 08-09 Dressers), 00-06 Big Twin Carb
models and 04-06 XL; repl. OEM #32316-99
SUG. RETAIL
$62.95
30.95
44.95
46.95
62.95
35.95
66.95
58.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
338
INDUCTION MODULE ASSEMBLY O-RING KIT
•Kit contains fuel fitting O-rings
•Made in the U.S.A.
PART #
DS-174988
DESCRIPTION
For 95-01 FLT, FLHT, FLHR fuel-injected models; repl. OEM #17043-95
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$15.95
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
1002-0002
SUPER E AND G SHORTY
CARBURETOR KITS
DS-0452
•Each carb kit includes an S&S Super E or
Super G gas carburetor, S&S teardrop
air cleaner assembly, manifold,(unless noted)
mounting hardware, fuel line, clamps,
overflow line, one extra intermediate
jet and two main jets, VOES tubing
(when applicable), installation and
jetting instructions
•Super E has a 17/8” (47.6mm) throat at the
DS-0407
butterfly and a 19/16” (39.6mm)
venturi and is recommended for use on Big Twin
or Sportster engines up to 100-cubic-inch
•Super G has a 21/16” (52.3mm) throat at the butterfly and a 13/4” (44.5mm) venturi and is
recommended for use on 90-cubic-inch and larger high-performance and modified engines
•21/16” G is not recommended for smaller, lower compression engines
•If there is a doubt as to which carburetor to use, we suggest the 17/8” Super E
•Carburetors only also available
NOTE: S&S Super E & G carburetors require the use of a two-cable, pull open/
pull close throttle assembly; S&S kits are compatible with stock cables except as noted.
EXHAUST
DS-0419
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
1001-0018
NOTE: Kits for 88-03 XL models require the use of 81-87 style cables or custom cables;
custom braided cables for XL models are available (see section 13)
GASKETS
& SEALS
1002-0025
NOTE: To use S&S Super E and Super G carb kits on Buell models, the stock throttle and idle cables must be changed. All 94-95 models,
and the 96 S-2 and S-2T Thunderbolt (models that use Harley-style switches on 1” handlebars), should use throttle cable PART #DS-223533 and idle cable
PART #DS-223534. All 96-02 S-1 Lightning, 97-01 S-3 and S-3T Thunderbolt, 97 S-2 and S-2T Thunderbolt and 97-02 M-2 Cyclone (models with
European-style controls on 7/8” handlebars) will use throttle cable PART #DS-223529 and idle cable PART #DS-223530.
IMPORTANT NOTE: Recommended for racing only, this carburetor is not legal for use in California on motor vehicles operated on public highways or
in other states where similar pollution laws may apply. User must determine the suitability of the product for his or her use and assumes all risk and
liability in connection therewith.
17/8” SUPER
SUG.
DESCRIPTION
E CARB KIT
RETAIL
FOR BIG TWIN MODELS (INCLUDES MANIFOLD)
For 99-05 Twin Cam
DS-0452
$524.95
For 92-99 Evolution
Big Twin
DS-0419
519.95
For 84-91 Evolution
Big Twin
DS-0407
498.95
For 79-84 Shovelhead
(band-style intake)
DS-0411
500.95
For 66-78 Shovelhead
(O-ring-style intake)
DS-0402
488.95
FOR BIG TWIN MODELS (NO MANIFOLD)
For 92-99 Evolution
Big Twin
DS-0442
508.95
For 84-91 Evolution
Big Twin
DS-0440
498.95
For 66-84 Big Twin
488.95
w/ five-gal. tank
1002-00021
21/16” SUPER
G CARB KIT
DS-0453
$544.95
DS-0434
539.95
DS-0427
544.95
DS-0431
513.95
DS-0422
503.95
-
-
-
-
-
-
•Super Shorty carbs can easily be installed
on motorcycles equipped with stock H-D
cruise control
•Includes all parts and instructions needed
to complete installation
PART #
DESCRIPTION
SUG. RETAIL
1003-0022 For 98-06 Big Twin
$62.95
17/8” SUPER
SUG.
DESCRIPTION
E CARB KIT
RETAIL
FOR BIG TWIN MODELS WITH 5- AND
6-GALLON GAS TANKS (INCLUDES MANIFOLD)
For 55-65 Panhead
$513.95
(O-ring-style intake)
DS-04012
FOR XL MODELS (INCLUDES MANIFOLD)
For 04-06 XL
1001-0018
580.95
For 91-03 XL
DS-0409
529.95
For 86-90 XL
DS-0408
521.95
For 83-85 XL (band-style
intake and VOES unit)
DS-0406
503.95
For 57-78 XL (O-ring
intake) (except models
w/ mag. ignitions)
DS-0404
480.95
FOR BUELL MODELS (INCLUDES MANIFOLD)
For 94-02 Buell models
DS-0448
575.95
1
PART #
DESCRIPTION
REPLACEMENT COMPONENTS
1002-0025
Super E carburetor only
1002-0026
Super G carburetor only
DS-289408
Repl. air cleaner element for E & G carbs
DS-289404
Repl. S&S air cleaner cover for E & G carbs
DS-289405
Repl. air cleaner screws (10-pk.)
1011-0324
Repl. breather hose for
93-06 Big Twin and 91-03 XL
CRUISE CONTROL ADAPTER KIT
SUG.
RETAIL
SUG.
RETAIL
$313.95
329.95
17.95
128.95
.95 (ea.)
2
21/16” SUPER
G CARB KIT
LIGHTING
SUG.
RETAIL
-
$544.95
534.95
DS-0426
513.95
DS-0424
503.95
-
-
Air cleaner notched for clearance.
Modifications needed to oil lines on 63-65 models.
SUG.
RETAIL
$.95 (ea.)
.95 (ea.)
BRAKES
TANKS &
OIL FILTERS
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
VFI CRUISE
CONTROL
ADAPTER KITS
All part numbers in BOLD MAGENTA are new for 2009.
CABLES
DASHES
& GAUGES
5.95
•Cruise control adapter
kits for S&S VFI Systems
connect directly to stock
1003-0020
cruise control cables
PART #
DESCRIPTION
1003-0020
For 98-06 Evolution Big Twin and Twin Cam
1003-0019
For 93-97 Evolution Big Twin
HANDLEBARS,
CONTROLS
& MIRRORS
-
DS-0429
DS-0428
PART #
DESCRIPTION
REPLACEMENT COMPONENTS (CONT)
1011-0325
Breather screw seals
(silicone-coated steel washer), .520” (10-pk.)
1011-0326
Breather screw seals
(silicone-coated steel washer), .380” (10-pk.)
ELECTRICAL
1003-0019
SUG. RETAIL
$25.95
29.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
339
SECTION
6
ENRICHENERS WITH KNOB
WINDSHIELDS
0657-0003
TOURING
LUGGAGE
SEATS &
SISSY BARS
•CNC-machined chrome1050-0168
plated aluminum
•Replaces the existing enrichener when
changing to a different style air cleaner
•Fits S&S E and G carburetor
0657-0004
1050-0010
ENRICHENERS WITH KNOBS
•Enricheners with eye-catching chrome
choke knobs
•Replaces the existing enrichener when changing
to a different style air cleaner
•Available in several styles
PART #
DESCRIPTION
FOR S&S SUPER E & G CARBS
0657-0003
Spike
0657-0004
Flat Top
0657-0005
Power Flow
EXHAUST
PART #
1050-0010
1050-0168
0657-0005
$49.95
49.95
49.95
DESCRIPTION
For S&S E and G choke knob
•Beautifully chromed aluminum
choke knob
•Replaces the plastic knob on most
carbs by using the included setscrew
•Knob can also be screwed on to 10/32 threaded cables
•Matching points cover, derby cover and head bolt covers
available separately
PART #
0657-0001
•CNC-machined billet aluminum
with a polished finish
•Replaces the stock enrichener lever
•Made in the U.S.A.
PART #
7805-0004
DESCRIPTION
Ali Baba choke knob
SUG. RETAIL
$38.95
•This unique chrome cover fits over the choke
lever on S&S E and G carbs
•Comes with hex key and an extra stainless
steel setscrew
TRANSMISSION
& DRIVELINE
ELECTRICAL
PART#
DS-289039
CHOKE LEVER COVER FOR S&S CARBS
•Die-cast chrome-plated cover for the choke lever on S&S E and G carbs
•Comes with its own wrench and two setscrews
PART #
DS-289038
DESCRIPTION
Choke lever cover
SUG. RETAIL
$9.95
EXTENDED FLOAT BOWL
AND FOAM CELL
CABLES
•Increase float bowl capacity to
160cc and the float bowl won’t
1004-0002
go dry during full-throttle passes
•Sold in a kit with extended main
jet emulsion tube
•Use with foam cell PART #1050-0045
(sold separately) to prevent fuel
slosh at high G-forces
•Foam cell installs over the extended emulsion tube
1050-0045
and is held down by a retainer plate
•Made in the U.S.A.
BRAKES
PART #
DESCRIPTION
FOR S&S SUPER D CARBURETOR
1004-0002
Extended float bowl
1050-0045
Foam cell and retainer
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
TANKS &
OIL FILTERS
DASHES
& GAUGES
SUG. RETAIL
$44.95
S&S CHOKE LEVER COVER
ENGINE
GASKETS
& SEALS
SUG. RETAIL
$52.95
52.95
ALI BABA CHOKE KNOB
SUG. RETAIL
S&S CHOKE KNOB
FUEL/AIR
SYSTEMS
DESCRIPTION
Round
Spike design
DESCRIPTION
Choke lever cover
SUG. RETAIL
$10.95
S&S KNOB
COVERS
•S&S Knob Covers are
made to cover both
the choke and idle
knobs on the S&S
1015-0002
1015-0004
Super “E” and “G”
•These covers have that same mean
look and attention to detail that makes Mother’s legendary
•The choke knob attaches from the bottom of the head
•The idle knob mounts from the rear of the head
•Both knobs remain totally functional and feature increased accessibility
•The i.d. of the choke cover measures .320” from the rear and the idle
cover has an i.d. of .450” from the bottom;
both attach
PART #
DESCRIPTION
SUG. RETAIL
securely with stainless
1015-0002
Skull
$46.95
steel setscrews
1015-0004
Devil
46.95
•Available in chrome
SUG. RETAIL
$199.95
32.95
CHOKE KNOB
•Unique design replaces the S&S enrichener
lever on E and G carbs
•Matches Thunder Cycle’s crankcase
engine breathers
PART #
DESCRIPTION
SUG. RETAIL
2103-0501 For use w/ custom air cleaners and velocity stacks
$67.95
HOTOP S&S CHOKE
KNOB ASSEMBLY
•Replaces the stock S&S enrichener
lever on E and G carbs when changing
to a different style air cleaner assembly
•Retains the stock plunger and spring
•Setscrew allows progressive enrichment
•Kit includes a chrome knob and a brass plunger nut
•Made in the U.S.A.
PART #
DS-289138
DESCRIPTION
Choke knob assembly
SUG. RETAIL
$41.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
340
Removal tool
1050-0123
-6AN FUEL LINE FITTING
FOR S&S CARBS
•Allows the use of -6AN fittings and fuel line
for fuel supply
•For all S&S Super E and G series carbs
•Used with Pingel fuel valves PART #DS-390285
(22mm inlet) and PART #0705-0058 (3/8” NPT inlet);
and The Guzzler® fuel valves PART #s 0705-0029/0705-0050 (22mm inlet)
and PART #s 0705-0028/0705-0056 (3/8” NPT inlet)
•Sold each
•Made in the U.S.A.
PART #
DS-289141
DESCRIPTION
-6AN fuel fitting
SUG. RETAIL
$33.95
1050-0124
HI-FLOW FUEL NIPPLES
•Flow more fuel than the stock OEM nipples
•Available in single- and dual-carb setups
•Also work with nitrous oxide or wherever an extra fuel line is needed
•Eliminates the need for a dual-outlet fuel petcock
•Includes removal tool
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR ALL 76-06 KEIHIN CARBURETORS (BUTTERFLY AND CV)
1050-0123
Single outlet
$42.95
1050-0124
Dual outlet
42.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
6
WINDSHIELDS
42-18
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
TM42-6
42-8
FUEL/AIR
SYSTEMS
HSR42/45 “SMOOTHBORE”
CARBURETOR KITS
•Kits include the redesigned 42mm/45mm
smoothbore carb in a natural finish
•Easier, faster installation using stock CV throttle cables
•Excellent throttle response, more power, improved acceleration and
better gas mileage
•Order fewer part numbers to cover more applications
•Installation instructions and hardware included
TM42-6P
HSR42/45 CARBURETORS
•For the high-performance engine builder who
needs a carb for specific custom applications
•Available in standard or highly-polished finishes
42MM/45MM EASY KITS
NOTE: Choke cable included, except for the TM42-6,
which uses stock choke cable from CV-type carb.
NOTE: Airbox adapter HS42/001-K must be ordered separately.
PART #
TM42-6
TM42-6P
TM45-2
TM45-2P
DESCRIPTION
42mm carb, standard finish
42mm carb, polished finish
45mm carb, standard finish
45mm carb, polished finish
SUG. RETAIL
$358.95
488.95
418.95
548.95
•Accept the original H-D intake manifold, choke cable, air cleaner and
throttle cables
•Keep the stock look of your bike
•May be used with high-flow air filters designed for the stock CV carb
42/45MM TOTAL KITS
•Everything needed for a complete installation
•Include performance intake manifold, rubber flange, 42mm or 45mm
carb, high-flow K&N filter, air cleaner cover, breather kit and hardware
•84-89 models require the use of 90-95 Big Twin-style cables
EASY KITS
PART #
DESCRIPTION
SUG. RETAIL
42MM
42-18
For 99-06 Twin Cam 88 and 90-99 Evolution Big
Twin (use stock air cleaner cover; may be used
with a Screamin’ Eagle air filter kit; will not work
with cruise control)
$388.95
42-7
For 90-99 Evolution Big Twin (include chrome air
cleaner cover; will not work with cruise control)
448.95
42-10
For 94-03 XL 1200 models (include special backing
plate and hardware; use stock oval air cleaner
cover and high-flow filter)
448.95
42-11
For 94-06 XL 1200 models and 94-02 Buell must use
aftermarket air filter (include air filter adapter)
418.95
45MM
1002-0030 For 99-06 Twin Cam 88 and 90-99 Evolution Big
Twin (use stock air cleaner cover; may be used
with a Screamin’ Eagle air filter kit; will not work
with cruise control)
418.95
TOTAL KITS
PART #
42MM CARB KITS
42-8
42-19
45MM CARB KITS
45-2X
45-4X
48-2P
48-2X
DESCRIPTION
SUG. RETAIL
For 84-99 Evolution Big Twin
For 99-06 Twin Cam 88/95
$578.95
608.95
For 84-99 Evolution Big Twin
For 99-06 Twin Cam 95
658.95
658.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HSR48 CARBURETORS
•These high-performance carbs are ideal for realizing the maximum
potential from custom and race engines
•Available in standard or highly-polished finishes
•Both use stock H-D cables and come with a flange
•For race and custom applications only
PART #
DESCRIPTION
SUG. RETAIL
48-2X
48mm carb, standard finish
$448.95
48-2P
48mm carb, polished finish
588.95
CRUISE CONTROL
BRACKET FOR MIKUNI
HARDWARE,
CHEMICALS
& TOOLS
•Fits all years with Mikuni HRS42/45/48
using stock cables
•Retains cruise control when adding a
Mikuni/Screamin’ Eagle carb
PART #
1013-0034
DESCRIPTION
For Mikuni HSR42/45/48 carbs
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$147.95
COVERS,
SECURITY
& GENERAL
341
SECTION
6
WINDSHIELDS
1001-0009
TOURING
42MM MIKUNI CARB KITS
•Kits include 42mm Mikuni carburetor, Hi-Flow
Mikuni air filter assembly with chrome cover, Rivera intake
manifold with cast finish and all required brackets and
mounting hardware
•Easy to install and tune
LUGGAGE
SEATS &
SISSY BARS
NOTE: Will require the use of a dual cable throttle assembly and
90-06 style cables.
PART #
DESCRIPTION
SUG. RETAIL
1001-0009 For 70-84 Shovelhead motors
$740.95
1001-0010 For 57-85 Iron Head Sportster motors
(except models w/ magnetos)
725.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
TOP GUN 48MM SINGLE
MIKUNI CARB KIT
•A must for big-inch motors
•Legendary Rivera performance in
a 48mm Mikuni carburetormanifold kit
•Includes Rivera’s all new proprietary
super-flow intake manifold specifically
designed for the large venturi 48mm
Mikuni carburetor
•Noticeably improves performance
and gas mileage
•Polished finish
NOTE: Use bracket PART #1013-0034 for bikes
with cruise control.
LIGHTING
PART #
DESCRIPTION
1001-0011 For 84-06 Evolution
and Twin Cam motors
SUG. RETAIL
$1,039.95
HANDLEBARS,
CONTROLS
& MIRRORS
BENDIX CARBURETORS
•High-performance Bendix carburetors are easy bolt-on replacements that
need no extra fitting or linkage connections
•Most offer adjustable high-speed jets; all provide improved acceleration and easier, quicker starts
•Made in the U.S.A.
CABLES
NOTE: All Bendix carbs may be used for other applications, provided correct cables are used.
DS-289079
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
DS-289078
PART #
DESCRIPTION
DS-289078 40mm high-performance carb w/ adjustable main jet, standard finish,
for all L81-89 H-D w/ dual-throttle cable linkage (will not fit models w/
CV carbs unless choke hook-up is fabricated, intake manifold purchased
and cables modified)
DS-289081 38mm high-performance carb w/ adjustable main jet, std. finish, for
69-75 Shovelhead; 57-75 XL (except models w/ magnetos)
DS-289080 38mm standard repl. Bendix carb w/ fixed main jet, std. finish, for
69-75 Shovelhead; 57-75 XL (except models w/ magnetos)
DS-289079 Choke cable accessory kit (required for installation of 40mm carb on
84-89 Big Twin, 86-87 XL Evolution)
DS-174710 Intake-to-carb gasket for Bendix, fits 71-75 Big Twin; repl. OEM #27023-71
SUG. RETAIL
$445.95
319.95
295.95
69.95
.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
342
38MM CARB KIT
•Kit includes carb, manifold
adapter, hose clamps,
throttle cable and two main
jets, as well as a chrome
front K&N air cleaner
HIGH-PERFORMANCE CARB KIT
NOTE: Does not
include manifold.
PART #
DESCRIPTION
DS-289086 38mm Mikuni carb kit for FX, FL and XL models
to 81, or L81-89 H-D models with single-cable
throttle control
SUG. RETAIL
$256.95
•Kit includes chrome-plated 40mm carburetor,
fittings, adapters, accessories and
installation instructions
•Offers quicker starts and improved acceleration
•Designed to fit OEM or performance air filters
•Easy bolt-on installation
PART #
DESCRIPTION
1002-0001
For 90-99 Evolution Big Twin models
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$643.95
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
2102-3008
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
EDELBROCK PERFORMER SERIES CARBURETORS
•EPS carburetors feature an adjustable accelerator pump for instant throttle response and easier starting
•Offer replaceable main jet for precise fuel metering for exceptional top-end performance; an idle air bleed system to set idle fuel independently from
other circuits, and a flat needle for superior fuel atomization that allows external needle adjustment without carb disassembly
•Sealed 440 stainless steel shaft gives smooth operation for a lifetime; hard anodized flat side makes for unsurpassed wear resistance
•Float bowl features an O-ring sealed fuel banjo that rotates 180° for easy custom fuel-line routing; each carb is wet flow-tested for quality
•Available in Quick Kits
•Quick Kits are designed to be used with stock OEM manifolds, cables and air cleaners
•Available in ball-burnished (plain) in 38 or 40mm sizes
•Replacement air filter element PART #E-3250 also available; SUG. RETAIL $42.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
NOTE: Carbs for 88-03 XL, 90-06 Big Twins spigot mount; all others are flange mount.
NOTE: Some 86 883 and 1100 XL models have extra-large cylinder fins, so carbs may need to be spaced or fins modified.
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
38MM
40MM
2102-3008
For 99-06 Twin Cam
$419.95 2102-3009
For 99-06 Twin Cam
2102-3008
For 90-99 Evolution Big Twin
419.95 2102-3009
For 90-99 Evolution Big Twin
2102-3010
For 84-89 Evolution Big Twin
419.95 2102-3011
For 84-89 Evolution Big Twin
2102-3010
For 70-84 Shovelhead Big Twin
419.95 2102-3011
For 70-84 Shovelhead Big Twin
2102-3008
For 88-03 XL Evolution
419.95 2102-3009
For 88-03 XL Evolution
2102-3010
For 86-87 XL Evolution
419.95 2102-3011
For 86-87 XL Evolution
SUG. RETAIL
$419.95
419.95
419.95
419.95
419.95
419.95
REPLACEMENT JET NEEDLES
PART #
JET NEEDLES
DS-289018
DS-289005
DESCRIPTION
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
SUG. RETAIL
13-0 needle
15-0 needle
FRAMES,
SUSPENSION
& FENDERS
$17.95
17.95
FOOTRESTS
& LICENSE
PLATE FRAMES
MAIN JETS
•Top-quality main jets for Performer carburetors
•PART #1006-0241 is a kit that contains one of
each 13 main jets #64-#88
SUG.
PART #
DESCRIPTION RETAIL PART #
1006-0241
Main jet kit
$61.95 1006-0007
1006-0001
64 main jet
6.95 1006-0008
1006-0002
66 main jet
6.95 1006-0009
1006-0003
68 main jet
6.95 1006-0010
1006-0004
70 main jet
6.95 1006-0011
1006-0005
72 main jet
6.95 1006-0239
1006-0006
74 main jet
6.95 1006-0240
AIR BLEEDS FOR
EDELBROCK CARBS
DESCRIPTION
76 main jet
78 main jet
80 main jet
82 main jet
84 main jet
86 main jet
88 main jet
SUG.
RETAIL
$6.95
6.95
6.95
6.95
6.95
6.95
6.95
•Top-quality air bleeds available in a
variety of colors
PART #
SIZE
1005-0001
20
1005-0002
25
1005-0003
30
1005-0004
35
1005-0005
40
1005-0006
45
1005-0007
50
All part numbers in BOLD MAGENTA are new for 2009.
TIRES,
TUBES &
WHEELS
COLOR
Purple
Black
Gold
Red
Blue
Green
Orange
SUG. RETAIL
$9.95
9.95
9.95
9.95
9.95
9.95
9.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
343
SECTION
6
WINDSHIELDS
TOURING
COMPLETE DUAL CARBURETOR KITS
•Get maximum power from Evolution-style TP and S&S 124 cu. in. engines
•Feature dual 40mm pumper chrome-plated carburetors
•Also include Perma-Star manifold and billet air cleaner
•Throttle cable sold separately
PART #
DESCRIPTION
SUG. RETAIL
1001-0014
For 124” TP motors
$1,774.95
1001-0015
For 124” S&S motors
1,774.95
LUGGAGE
1001-0014
SEATS &
SISSY BARS
EXHAUST
1010-0082
2102-3026
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
PERFORMER SERIES DUAL-CARBURETOR KITS,
MANIFOLDS AND AIR CLEANER
•Designed for 84-06 Big Twins (except Ultra)
•Kit includes chrome-plated carbs, mounting hardware
and fuel line
1010-0008
•Perma-Star three-piece manifold sold separately
•Dual-carb oval air cleaner has a billet-look aluminum top and a K&N 23/4” element (sold separately)
•Replacement air filter PART # E-3325, SUG. RETAIL $34.95, for billet air cleaner also available
NOTE: This setup may interfere with your leg if you are over six feet tall and your bike has forward pegs.
PART #
CARB KITS
2102-3025
2102-3026
2102-3027
DESCRIPTION
SUG. RETAIL
34mm dual-carb kit for 80”-95” engines
38mm dual-carb kit for 96”-113” engines
40mm dual-carb kit for 114”-up engines
DUAL-CARB INTAKE MANIFOLDS
APPLICATIONS
99-06 Twin Cam std. 88”, 95”
84-99 Evolution Big Twin 80”, 88”, 89”, 96”
88” Evolution-style w/ short S&S cylinders
93” Evolution-style
107” Evolution-style
113” Evolution-style
121” Evolution-style
124” Evolution-style
1
$862.95
901.95
905.95
2102-3034
PART #
DESCRIPTION
DUAL-CARBURETOR BILLET AIR CLEANER
2102-3034
Billet air cleaner w/ K&N filter
EDELBROCK AND TP HEADS (SQUARE INTAKE PORT)
2114-3003
DS-289237
1010-0009
1010-0009
1010-0011
1010-0082
-
STOCK AND S&S HEADS
2114-3004
DS-2892411
1010-0008
1010-0010
1010-0008
DS-289241
1010-0083
1010-0085
$279.95
SUG. RETAIL
$464.95
490.95
490.95
490.95
490.95
490.95
490.95
490.95
Except 88” with short S&S cylinders.
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-223097
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
OPTIONAL ENRICHENER CABLE KITS
COVERS,
SECURITY
& GENERAL
PART #
DS-223097
DS-223073
DS-223072
344
SUG. RETAIL
DS-223072
DESCRIPTION
16” side-mount enrichener cable kit
Repl. cable for DS-223097
24” dash-mount enrichener cable kit
MIXTURE
ADJUSTMENT TOOL
AIR CLEANER SPACER
•For installing stock air cleaner and backing
plate to an Edelbrock carburetor
SUG. RETAIL
$35.95
27.95
59.95
PART #
DS-223077
DESCRIPTION
(QS to CV bolt
pattern) for 90-99 80”
Big Twin, 88-03 XL
SUG. RETAIL
3/8”
All part numbers in BOLD MAGENTA are new for 2009.
$43.95
•Replaces the mixture adjustment
cover screw for easy,
convenient adjusting
SUG.
PART #
DESCRIPTION
RETAIL
DS-289199 Mixture
adjustment tool $17.95
SECTION
6
WINDSHIELDS
TOURING
DEALER STOCKING
CARBURETOR PARTS KITS
•Kits are designed to help dealers by making
it easier for them to service S&S products
•Jet kit 1003-0015 contains three each of all
intermediate jets and five each of all main
jets, plus a main jet tool
•Carburetor parts kit PART #1003-0016
contains replacement parts for S&S
Super E and G carbs
•Dealer stocking parts kit PART #1050-0024
1003-0016
1003-0015
contains kits PART #s 1003-0015 and
1050-0024
1003-0016, plus a miscellaneous parts kit
containing the most commonly needed gaskets and parts to service S&S oil pumps, as well as top end gaskets for S&S engines of various bore sizes
•Come in durable hinged vinyl divider boxes that have labels on the inside cover for easy location, identification and reordering of parts
PART #
1050-0024
1003-0015
1003-0016
DESCRIPTION
Dealer stocking parts kit (contains kits 1003-0015 and 1003-0016 below)
S&S jet kit
S&S carburetor parts kit
DS-289111
112923
SUG. RETAIL
$1,423.95
300.95
322.95
DS-289113
112903
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
1003-0046
ELECTRICAL
LIGHTING
160057
160491
HANDLEBARS,
CONTROLS
& MIRRORS
1003-0056
CARBURETOR KITS AND
REPLACEMENT COMPONENTS
•Rebuild kits are available in master kits,
body-only kits and accelerator pump kits
•Replacement gaskets, O-rings and
components are made from the highestquality materials available
PART #
REBUILD KITS
112923
112924
112903
DS-289111
DS-289112
DS-289113
DS-289183
1003-0021
CABLES
112084
DS-289185
DESCRIPTION
SUG. RETAIL
Master rebuild kit Super E (body, accelerator pump, fasteners, springs, idle mixture screw, seat and needle assembly)
Master rebuild kit Super G (body, accelerator pump, fasteners, springs, idle mixture screw, seat and needle assembly)
Rebuild kit for Super B (body rebuild kit)
Rebuild kit for Super E (body rebuild kit)
Rebuild kit for Super G (body rebuild kit)
Accelerator pump rebuild kit for E & G (diaphragm, spring, check balls and springs, pushrod and required hardware)
PART #
DESCRIPTION
SUG. RETAIL (EA.)
REPLACEMENT COMPONENTS
$.95
DS-289934 Manifold to carburator O-ring, Super G (10-pk.)
DS-289935 Manifold to carburator O-ring, Super E (10-pk.)
.95
DS-289933 Bowl gasket, Super E and G (10-pk.)
2.95
112091
Bowl gasket, Super B and D (10-pk.)
18.95
DS-173249 Carb to air cleaner gasket (5-pk.)
8.95
1/4” Insulator block w/ O-ring Super E
160491
10.95
1/4” Insulator block w/ O-ring Super G
160492
10.95
160057
1” Spacer block Super E
35.95
160357
1” Spacer block Super G
55.95
DS-289183 Gas line insulator
9.95
DS-289185 19” gas line
5.95
1003-0039 Idle speed/pump adjuster spring (10-pk.)
0.95
1003-0085 Idle mixture screw (5-pk.)
7.95
1003-0040 Idle mixture screw spring (10-pk.)
0.95
1003-0041 Bowl plug (5-pk.)
1.95
7
1
1003-0042 Needle: 1 /8” E & 2 /16” G (ea.)
10.95
1003-0043 Bellows seal, accelerator pump (5-pk.)
3.95
1003-0044 Diaphragm spring, accelerator pump (10-pk.)
0.95
1003-0045 Accelerator pump diaphragm (ea.)
12.95
1003-0046 Throttle cable guide/bracket for use w/
butterfly cables (ea.)
10.95
$73.95
76.95
38.95
36.95
38.95
18.95
PART #
DESCRIPTION
SUG. RETAIL (EA.)
REPLACEMENT COMPONENTS (CONT)
1003-0021 Throttle cable guide/bracket for use w/ CV
(constant velocity) cables (ea.)
$10.95
1003-0047 Fast idle plunger/enrichener (ea.)
10.95
1003-0049 Accelerator pump pushrod (5-pk.)
4.95
1003-0050 Ball check spring (5-pk.)
1.95
1003-0051 Accelerator pump cap assembly (ea.)
21.95
1003-0052 Fuel inlet/seat for 17/8” E & 21/16” G carb
(uses needle 1003-0042) (10-pk.)
10.95
1003-0054 Shim kit 5/16” i.d. breather
(12-ct., various sizes)
8.95
14.95
1003-0055 Shim kit 1/2” i.d. breather (12-ct., various sizes)
1003-0056 Breather conversion kit for Big Twin
(converts early S&S air cleaners to new-style
breather hardware)
30.95
0.95
1003-0057 Bowl screws: 10-24 x 23/8” (10-pk.)
1003-0058 Pump cap screw 8-32 (10-pk.)
0.55
112084
Enrichment device for B series carb
(will work on Super E & G carbs when
changing air cleaners) (ea.)
31.95
All part numbers in BOLD MAGENTA are new for 2009.
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
345
SECTION
6
WINDSHIELDS
HS42/001-K
TOURING
990-662-002
LUGGAGE
SEATS &
SISSY BARS
HSR48 MAIN JET EXTENSION KIT
•Increases amount of fuel to float bowl
•Completely submerges main jet within
extender, eliminating chance of air bubbles
getting though
PART #
1006-0248
DESCRIPTION
HSR48 main jet extension kit
SUG. RETAIL
$24.95
REPLACEMENT PARTS FOR HSR 42/45 CARB KITS
PART #
HS42/001-K
990-605-065
990-662-002
EXHAUST
FUEL/AIR
SYSTEMS
DESCRIPTION
Air box adapter w/ three mounting screws
Short idle screw adjuster
Choke cable, for use with Mikuni plastic nut,
spring and brass plunger
SUG. RETAIL
$18.95
14.95
22.95
ENGINE
TRANSMISSION
& DRIVELINE
KHS-016
PUMP BODY BOOT
FOR BENDIX CARBS
•Sold each
PART #
5103
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
DESCRIPTION
72-E76 XL, FX And FL W/ Bendix carbs
SUG. RETAIL
$8.95
CARBURETOR
REBUILD KIT
•Includes all the parts needed to
rebuild HSR42/45 or
HSR48 carburetors
PART #
KHS-016
KHS-031
KHS-031
DESCRIPTION
HSR42/45 Carb rebuild kit
HSR48 Carb rebuild kit
SUG. RETAIL
$39.95
39.95
DS-289090
CABLES
1003-0166
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
DS-173528
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
BENDIX CARB REPAIR KITS
HARDWARE,
CHEMICALS
& TOOLS
GENUINE BENDIX CARB REBUILD KITS
COVERS,
SECURITY
& GENERAL
PART #
DESCRIPTION
SUG. RETAIL
DS-289084 40mm Bendix rebuild kit for L81-89
$57.95
DS-289090 Bendix carb rebuild kit for 72-E76 XL; 71-75 FX, FL;
repl. OEM #27132-71
39.95
346
•Rebuild kit includes all necessary gaskets, seals,
idle screw and accelerator pump
•Accelerator pump is also available separately
•Comes complete with all the necessary gaskets and seals, as well as an
accelerator pump (except DS-173528 includes gaskets only)
PART #
DESCRIPTION
SUG. RETAIL
1003-0166 Bendix carb repair kit for 72-E76 XL;
71-75 FX, FL (import)
$19.95
DS-289097 Accelerator pump only for 72-E76 FX, FL;
71-75 XL (import)
10.95
DS-173528 Bendix gasket kit for 72-E76 XL, 71-75 FX/FL
(Genuine James)
6.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
DS-289109
DS-289089
CARB REBUILD KITS FOR KEIHIN CV
•For use with all 90-06 Big Twin or 88-06 XL models
using the CV carb
•Includes all the necessary needles, O-rings,
etc. for a complete rebuild
PART #
DESCRIPTION
DS-289109
For all 88-06 CV carbs (James)
DS-289098
For all 88-06 CV carbs (imported)
EXHAUST
CARB REBUILD KITS
FOR STANDARD KEIHIN
SUG. RETAIL
$37.95
14.95
•Kits include the parts necessary
for rebuilding Keihin carbs
•Feature Viton (not neoprene) needles
PART #
DESCRIPTION
SUG. RETAIL
FOR 76-89 H-D; REPL. OEM #27006-76
DS-289099
Rebuild kit 76-78 (Japan)
$24.95
DS-289089
Rebuild kit 76-89 (Taiwan)
16.95
DS-289105
Repl. accelerator pump boot for Keihin
(5-pk.); repl. OEM #27311-76
1.95 (ea.)
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
1013-0005
GASKETS
& SEALS
1013-0006
ELECTRICAL
1013-0004
CARBURETOR SPACERS
•Easy way to add extra torque and horsepower
•Machined from solid 6061 T-6 billet aluminum that
completely eliminates porosity problems
•Machined finish can be polished to a bright luster
•Made in the U.S.A.
PART #
DESCRIPTION
FOR S&S E & B SERIES CARBURETORS (17/8”)
1013-0004
1”
1013-0005
11/2”
1013-0006
2”
FOR S&S G & D SERIES CARBURETORS (21/16”)
1013-0007
1”
1013-0008
11/2”
1013-0009
2”
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
SUG. RETAIL
$33.95
39.95
39.95
33.95
39.95
39.95
CABLES
LINKERT CARB REBUILD KIT
•Includes all necessary gaskets, seals and O-rings
PART #
DESCRIPTION
DS-289108
36-65 Linkert carb rebuild kit
SUG. RETAIL
$13.95
DS-289104
TANKS &
OIL FILTERS
DS-173537
CARBURETOR INSULATOR
BLOCK KITS
DS-174381
CARBURETOR AND INTAKE MANIFOLD
SEAL KITS
•Kits contain carb-to-intake seal and two
intake-to-cylinder head seals unless noted
PART #
DESCRIPTION
SUG. RETAIL
DS-174381 40mm seal kit for 99-06 Twin Cam,
90-99 80” Evolution and 88-06 XL w/ OEM carbs
$11.95
DS-173537 44mm seal kit for 99-06 Twin Cam, 90-99 80”
Evolution and 88-06 XL w/ Screaming Eagle carbs
11.95
0934-1610 Carb/manifold seal kit for 66-84 Bendix/Zenith,
7.95
Keihin, Tillotson, Sportster, Shovelhead
0935-0088 S&S carb/manifold seal kit; repl. OEM # 27002-66-SS
12.95
0935-0083 SU carb/manifold seal kit; repl. OEM # 27002-66-SU
22.95
0935-0084 1660 Edelbrock manifold seal kit;
repl. OEM # 27002-E1660
6.95
0935-0085 1671 Edelbrock manifold seal kit;
repl. OEM # 27002-E1671
6.95
0935-0086 Ramjet rigid mount manifold seal kit;
repl. OEM 27002-89R
6.95
BRAKES
•Kits include 3/8” fiber insulator
block and gaskets
•Designed to reduce the risk of
boiling fuel in the carb
•Made in the U.S.A.
PART #
DS-289104
DS-174889
2011-1214
2011-1215
0935-0100
0934-0945
0935-0099
DESCRIPTION
SUG. RETAIL
For 76-80 FX and 79-84 FL models; will also fit any
Bendix or Keihin carb when longer studs/bolts
$18.95
are used (13/4” i.d.)
For custom applications; 113/16” i.d.
18.95
w/ 3/8” mounting holes
For custom applications; 1.86” i.d.
18.95
w/ 23/4” center-to-center mounting holes
For custom applications; 2.06” i.d. w/
3” center-to-center mounting holes
18.95
For 44-65, carb to intake (Linkert);
repl. OEM #29250-55
14.95
For 40-65, carb to intake (Linkert to
Bendix/Keihin); repl. OEM #27411-40A
6.95
For carb to intake (Screamin’ Eagle);
repl. OEM #29250-99
22.95
All part numbers in BOLD MAGENTA are new for 2009.
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
347
SECTION
6
DS-289306
WINDSHIELDS
RECALIBRATION KITS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
•Recalibrate your stock Keihin
CV carb to make full use of the
performance potential
•Include the jets, needles,
instructions, etc. necessary to
recalibrate stock engines with
CV carbs
•Kits provide broad-range performance gains and maintain
stock driveability
PART #
DESCRIPTION
DYNOJET RECALIBRATION KITS
DS-290347
For 00-06 Twin Cam
DS-290148
For 99 Twin Cam
DS-289306
For 96-99 80” Big Twin and 96-03 XL
DS-289303
For 90-95 Big Twin, XL 883, 1200
DS-289450
For 89-03 XL 883 “race only”
1007-0001
For 04-06 XL 883/C
DS-289451
For 98-03 XL1200 Sport
1007-0002
For 04-06 XL 1200/C/R
DS-289301
For Buell Lightning S1
DS-289309
For 99-02 Buell M2 Cyclone
DS-290348
For 00-02 Buell blast
SUG. RETAIL
$96.95
96.95
96.95
96.95
96.95
96.95
96.95
96.95
96.95
96.95
96.95
STAGE 1 JET KIT
•Designed for motorcycles with stock engines using stock airbox,
air filter and stock or aftermarket exhaust
•Non-accelerator pump models
•Fully adjustable to allow for the use of well-designed aftermarket
exhausts and stock replacement air filter
•Improves throttle response and driveability
•Power increases of approximately 5% throughout the entire power range
PART #
DESCRIPTION
SUG. RETAIL
DJ-8101
88-89 XL 883/1200 models
$96.95
DS-289075
TRANSMISSION
& DRIVELINE
DS-289076
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
1007-0157
DS-289121
DS-289120
THE ORIGINAL
“POWER TUBE”
ATOMIZER
•Atomizer power tube and jets are CNC-machined
from brass for consistency and accuracy
•Power tube jet kits provide fine tuning with
increased horsepower when using a less restrictive
air cleaner and exhaust
•Converts fuel from a squirting liquid to a fine mist
•Eliminates spitting and popping through the carburetor
•Master kits include slow jets, main jets, slide spring, drill bit and needles
•Made in the U.S.A.
NOTE: Covered under the following U.S. patent #s: 5,233,180/5,562,868/5,66
2,836/5,810,264/6,270,060.
PART #
DESCRIPTION
SUG. RETAIL
DS-289076 Performance master kit for 88-06 stock
40mm CV carbs
$105.95
DS-289083 Performance master kit for 99-06
Screaming Eagle 44mm CV carbs
105.95
DS-289075 Power Tube for HSR 42 and 45 w/ jets
60.95
1007-0157 Power Tube for HSR 42 and 45 (w/o jets)
56.95
DS-289121 Power Tube for 88-95 stock CV carbs
(Big Twin, XL, Buell)
85.95
47.95
DS-289120 Power Tube for S&S B, D, E and G series carburetors
JET KIT
•Recalibrate your stock CV carb to make the
most out of the air cleaner, exhaust and cam
changes or head work
•Kit contains a #5 MAHR needle, 08BOO jet holder,
#45, #48 and #50 slow jets, and #190, #195, #200 and #205 main jets
•Suggested jetting guidelines are included with the kit
•Made in the U.S.A.
NOTE: Not for use on pollution-controlled vehicles used on streets
or highways.
PART #
DESCRIPTION
SUG. RETAIL
DS-195100
For 99-06 Twin Cam 88
$56.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
NO-HASSLE JET KITS
& LICENSE
CV CARBURETORS
PLATE FRAMES FOR
•Genuine Keihin parts
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
348
DS-289331
•Includes two slow jets, three main jets
and a jet needle
•No need for drilling
•Detailed instructions for jetting your motor from stock to modified
PART #
DESCRIPTION
SUG. RETAIL
DS-289331 For 89-99 Evolution Big Twin
$39.95
1007-0015 For 04-06 XL 883/1200
38.95
DS-289332 For 88-03 XL 1200 (except 97-03 1200S)
39.95
DS-289334 For 97-03 XL1200S, 94-98 Buell S1, S2/S2T, S3/S3T
and M2
39.95
DS-289333 For 88-03 XL 883
39.95
DS-196002 Keihin slow jet screwdriver
15.95
RECALIBRATION KIT
FOR 40MM KEIHIN CV CARB
•Super high-quality recalibration kit for CV carbs
•Kit has all the components for dialing in a CV carb with or without an
accelerator pump
PART #
DESCRIPTION
SUG. RETAIL
DS-289304 For all 88-99 CV carbs (except Twin Cam 88)
$36.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
WINDSHIELDS
THUNDERSLIDE
JET KITS
DS-290356
STAGE 7 THUNDERSLIDE
WITH JET KITS
•Stage 7 kits are for 80 plus horsepower engines and include a taller
carburetor top for more slide movement
•Revolutionary composite plastic slide provides unparalleled performance
gains in both horsepower and mileage
•Unique set of lift holes moderate how the slide moves with respect
to throttle position; the faster the slide opens, the quicker the
throttle response
•Kits include jets, needles, clips, carburetor top and other necessary parts
for CV carbs
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
DS-290356 For 00-06 Twin Cam
$164.95
DS-290352 For 90-99 Big Twin Evolution
164.95
DS-290351 For Screamin’ Eagle 44mm Keihin CV Twin Cam 88
164.95
DS-290350 For Screamin’ Eagle 44mm Keihin CV Evolution
164.95
6
•Designed for engines with
stock or aftermarket air
filter and exhaust system
•Revolutionary composite
plastic slide provides
unparalleled performance
gains in both horsepower
and mileage
•Unique set of lift holes
DS-289307
moderate how the slide
moves with respect to
throttle position; the faster
the slide opens, the quicker the throttle response
•Kit also includes jets, needles, clips and other necessary parts
for CV carbs
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
DS-290349
For 00-06 Twin Cam
$149.95
DS-290149
For 99 Twin Cam
149.95
DS-289307
For 90-99 Evolution Big Twin
149.95
DS-289308
For 89-03 XL 1200 (not Sport) (Stage 1)
149.95
DS-289454
For 98-03 XL 1200 Sport (Stage 1)
149.95
1007-0005
For 04-06 XL 1200/C/R
149.95
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
1007-0155
1007-0154
TRANSMISSION
& DRIVELINE
1007-0156
GASKETS
& SEALS
THUNDERPRO
THUNDERJET
•ThunderJet’s
patented third fuel circuit delivers needed fuel
to the engine only at higher rpm (4,500 and up)
•Designed for today’s larger-displacement engines, with a higher
capacity fuel delivery tube for increased volume when used in larger,
high-rpm engines
•Allows use of the main jet to tune for smooth, broad mid-range power
– supplement the top-end with the ThunderJet
•Jets are used to control the amount of fuel sent to the engine
•Comes with complete installation/tuning instructions and extra jets
•The system can operate over a wide range of altitude and
atmospheric conditions
•Made in the U.S.A.
CARBURETOR JET KITS
•Designed to recalibrate OEM stock carburetors
for use with Vance & Hines exhaust systems
•Include complete needle assemblies with five
ranges of adjustment, main jets, clips, washer
and appropriate drill bits
•Include detailed instructions for
easy installation
PART # DESCRIPTION
SUG. RETAIL
V22827 For 00-06 Twin Cam models
$97.95
V22831 For Buell 00-05 Blast
97.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
NOTE: Some machining of carb body is required.
NOTE: Legal in California only for racing vehicles which may never be
used upon a highway.
PART #
DESCRIPTION
SUG. RETAIL
FOR S&S G AND D CARBS
1007-0154
Polished
$89.95
1007-0155
Natural aluminum
77.95
1007-0156
Black
77.95
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
Keihin CV
carb kits
FRAMES,
SUSPENSION
& FENDERS
S&S E and B
carb kits
FOOTRESTS
& LICENSE
PLATE FRAMES
THUNDERJET KITS
•ThunderJet’s patented third fuel circuit has a built-in air correction system that permanently solves the problem
of poor mid-range and/or lean top-end performance
•The system can operate over a wide range of altitude and atmospheric conditions
•Made in the U.S.A.
TIRES,
TUBES &
WHEELS
NOTE: Some machining of carb body is required.
NOTE: Legal in California
PART #
FOR KEIHIN CV CARBS
1007-0152
1007-0153
DS-289295
DS-289296
DS-289297
only for racing vehicles which may never be used upon a highway.
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
FOR S&S E AND B CARBURETORS
Natural aluminum
$65.95 1007-0150
Polished
Polished
82.95 1007-0151
Natural aluminum
Red
65.95 DS-289298
Red
Blue
65.95 DS-289299
Black
Black
65.95 DS-289300
Blue
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$82.95
65.95
65.95
65.95
65.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
349
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
JET KITS
FOR S&S CARBS
CV MAIN JET KIT
•For jetting
most stock and
performance engines
•Low-range kit contains
one each of the
following intermediate
jets (.025, .0265, .028,
DS-0451
.0295) and one each of
the following main jets (.062, .064, .066, .068, .070, .072, .074)
•High-range kit contains one each of the following intermediate jets
(.0295, .031, .032. .033) and one each of the following main jets (.072, .074,
.076, .078, .080, .082, .084)
•Dealer jet kit contains three each of all intermediate jets (except 10050008 and 1005-0009) and five each of all main jets (except 1006-0233, 10060234, 1006-0235, 1006-0236, 1006-0237 and 1006-0238) plus a main jet tool
•Replacement jets also available separately
PART #
DESCRIPTION
SUG. RETAIL (EA.)
JET KITS
DS-0450
Low-range kit
$44.95
DS-0451
High-range kit
44.95
1003-0015
Dealer jet kit
300.95
INTERMEDIATE JETS
DS-94025
.025 intermediate jet (3-pk.)
7.95
DS-940265
.0265 intermediate jet (3-pk.)
7.95
DS-94028
.028 intermediate jet (3-pk.)
7.95
DS-940295
.0295 intermediate jet (3-pk.)
7.95
DS-94031
.031 intermediate jet (3-pk.)
7.95
DS-94032
.032 intermediate jet (3-pk.)
7.95
DS-94033
.033 intermediate jet (3-pk.)
7.95
1005-0008
.036 intermediate jet (3-pk.)
7.95
1005-0009
.040 intermediate jet (3-pk.)
7.95
MAIN JETS
1006-0228
.040 main jet (5-pk.)
6.95
1006-0229
.042 main jet (5-pk.)
6.95
1006-0230
.044 main jet (5-pk.)
6.95
1006-0231
.046 main jet (5-pk.)
6.95
1006-0232
.048 main jet (5-pk.)
6.95
1006-0233
.050 main jet (5-pk.)
6.95
1006-0234
.052 main jet (5-pk.)
6.95
1006-0235
.054 main jet (5-pk.)
6.95
1006-0236
.056 main jet (5-pk.)
6.95
1006-0237
.058 main jet (5-pk.)
6.95
1006-0238
.060 main jet (5-pk.)
6.95
DS-72062
.062 main jet (5-pk.)
6.95
DS-72064
.064 main jet (5-pk.)
6.95
DS-72066
.066 main jet (5-pk.)
6.95
DS-72068
.068 main jet (5-pk.)
6.95
DS-72070
.070 main jet (5-pk.)
6.95
DS-72072
.072 main jet (5-pk.)
6.95
DS-72074
.074 main jet (5-pk.)
6.95
DS-72076
.076 main jet (5-pk.)
6.95
DS-72078
.078 main jet (5-pk.)
6.95
.080 main jet (5-pk.)
6.95
DS-72080
DS-72082
.082 main jet (5-pk.)
6.95
DS-72084
.084 main jet (5-pk.)
6.95
•Kit contains 195, 200,
205, 210, 215 and 220
main jets
•Made in the U.S.A.
PART #
DESCRIPTION
DS-289186
For CV carbs on 90-06 Big Twin and
88-06 XL models
SUG. RETAIL
$19.95
MAIN JETS
FOR CV-TYPE
KEIHIN CARBS
•Precision-made in Japan
•Master jet kit consists of 14 fivepacks, includes all jets listed below
from #140 to #205; you furnish box
•Individual main jets sold in five-packs
SUG.
PART #
DESCRIPTION
RETAIL
FOR 90-06 BIG TWIN AND 88-06 XL
DS-289538 Master jet kit
$2.95
DS-289533 #140 main jet
2.95
DS-289534 #145 main jet
2.95
DS-289535 #150 main jet
2.95
DS-289536 #155 main jet
2.95
DS-289321 #160 main jet
2.95
DS-289322 #165 main jet
2.95
DS-289323 #170 main jet
2.95
PART #
DESCRIPTION
FOR 90-06 BIG TWIN
AND 88-06 XL (CONT)
DS-289324 #175 main jet
DS-289325 #180 main jet
DS-289326 #185 main jet
DS-289327 #190 main jet
DS-289328 #195 main jet
DS-289329 #200 main jet
DS-289537 #205 main jet
SUG.
RETAIL
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
PILOT JETS FOR KEIHIN CARBS
•Available for both styles (butterfly and
CV) of Keihin carbs 76-06
•Precision-made in Japan
•Master kit for CV-style consists of nine
five-packs, includes all jets listed below
from #40 to #54; you furnish box
•Individual pilot jets sold in five-packs
SUG.
SUG.
PART #
DESCRIPTION RETAIL PART #
DESCRIPTION RETAIL
CV-STYLE CARB; 90-06 BIG TWIN
BUTTERFLY-STYLE CARB;
AND 88-06 XL
76-89 BIG TWIN AND 76-87 XL
DS-289542 Master jet kit
$2.95 DS-289310 #50 pilot jet
$2.95
DS-289315 #40 pilot jet
2.95 DS-289311 #52 pilot jet
2.95
DS-289316 #42 pilot jet
2.95 DS-289312 #54 pilot jet
2.95
DS-289317 #44 pilot jet
2.95 DS-289313 #56 pilot jet
2.95
DS-289318 #45 pilot jet
2.95 DS-289314 #58 pilot jet
2.95
DS-289319 #46 pilot jet
2.95
DS-289320 #48 pilot jet
2.95
DS-289539 #50 pilot jet
2.95
DS-289540 #52 pilot jet
2.95
DS-289541 #54 pilot jet
2.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
IDLE AIR ADJUSTING SCREW
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
350
•Knurled and slotted head for easy adjustment
•Includes brass screw, O-ring, washer and spring
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
1050-0172 For all CV carburetors
$29.95
ADJUSTABLE MAIN JET
FOR BENDIX OR ZENITH CARBS
•Kit is easily installed by drilling and
tapping a 9/32”-32 thread in the carb’s body
•Main jet is completely adjustable and eliminates time-consuming jet
changes when fine tuning, changing fuels or climates
•Spiral tap is necessary when installing adjustable main jet on Bendix or
Zenith carbs
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
DS-289093
Adjustable main jet for Bendix or Zenith carbs
$57.95
40MM CV VACUUM PISTON
NOTE: No warranty on rubber diaphragm.
PART #
DESCRIPTION
2101-0008
For 88-06 40mm carb; repl. OEM #27585-88
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$41.95
SECTION
WINDSHIELDS
RD PRECISION MAIN JETS
•Brass carburetor jets are high precision and
flow-calibrated for extremely accurate fuel flow rate
•Available in a range of sizes for Mikuni and Keihin applications
•High-quality replacement; NOT original Mikuni or Keihin jets
•Individual jet sizes sold in 4-pack to dealers, sold each to consumer
•Dealer kits that include a range of sizes also available
Mikuni-style
slot head
1006-0012
TOURING
Mikuni-style
hex head
DEALER JET KITS
PART #
1006-0012
1006-0013
1006-0014
1006-0015
1006-0016
1006-0017
6
TYPE
Mikuni-style slot head (SJ prefix)
Mlkuni-style hex head (HJ prefix)
Mikuni-style hex head (HJ prefix)
Keihin-style slot head (KJ prefix)
Keihin-style hex head (CR prefix)
Keihin-style hex head (CR prefix)
DESCRIPTION
4-pc. each jet
2-pc. each jet
2-pc. each jet
4-pc. each jet
2-pc. each jet
2-pc. each jet
SUG.
RETAIL
sizes 72.5 through 160 $209.95
sizes 70 through 230
90.95
sizes 240 through 500
90.95
sizes 80 through 190
171.95
sizes 80 through 158
107.95
sizes 160 through 235
107.95
LUGGAGE
SEATS &
SISSY BARS
Keihin-style
hex head
Keihin-style
slot head
EXHAUST
MIKUNI-STYLE SLOT HEAD (SJ PREFIX)
PART #
1006-0018
1006-0019
1006-0020
1006-0021
1006-0022
1006-0023
1006-0024
1006-0025
1006-0026
1006-0027
JET
SIZE
72.5
75
77.5
80
82.5
85
87.5
90
92.5
95
SUG. RETAIL
(EA.)
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
PART #
1006-0028
1006-0029
1006-0030
1006-0031
1006-0032
1006-0033
1006-0034
1006-0035
1006-0036
1006-0037
JET
SIZE
97.5
100
102.5
105
107.5
110
112.5
115
117.5
120
SUG. RETAIL
(EA.)
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
PART #
1006-0038
1006-0039
1006-0040
1006-0041
1006-0042
1006-0043
1006-0044
1006-0045
1006-0046
1006-0047
JET
SIZE
122.5
125
127.5
130
132.5
135
137.5
140
142.5
145
SUG. RETAIL
(EA.)
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
PART #
1006-0073
1006-0074
1006-0075
1006-0076
1006-0077
1006-0078
1006-0079
1006-0080
1006-0081
1006-0082
1006-0083
1006-0084
1006-0085
1006-0086
1006-0087
1006-0088
1006-0089
1006-0090
JET
SIZE
175
180
185
190
195
200
210
220
230
240
250
260
270
280
290
300
310
320
SUG. RETAIL
(EA.)
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
PART #
1006-0091
1006-0092
1006-0093
1006-0094
1006-0095
1006-0096
1006-0097
1006-0098
1006-0099
1006-0100
1006-0101
1006-0102
1006-0103
1006-0104
1006-0105
1006-0106
1006-0107
1006-0108
JET
SIZE
330
340
350
360
370
380
390
400
410
420
430
440
450
460
470
480
490
500
SUG. RETAIL
(EA.)
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
PART #
1006-0048
1006-0049
1006-0050
1006-0051
1006-0052
1006-0053
1006-0054
JET
SIZE
147.5
150
152.5
155
157.5
160
170
SUG. RETAIL
(EA.)
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
JET
SIZE
70
80
90
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
SUG. RETAIL
(EA.)
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
PART #
1006-0109
1006-0110
1006-0111
1006-0112
1006-0113
1006-0114
1006-0115
1006-0116
1006-0117
1006-0118
1006-0119
1006-0120
1006-0121
1006-0122
1006-0123
1006-0124
1006-0125
1006-0126
JET
SIZE
510
520
530
540
550
560
570
580
590
600
610
620
630
640
650
660
670
680
SUG. RETAIL
(EA.)
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
JET
SIZE
72.5
75
77.5
80
82.5
85
87.5
90
92.5
95
SUG. RETAIL
(EA.)
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
PART #
1006-0137
1006-0138
1006-0139
1006-0140
1006-0141
1006-0142
1006-0143
1006-0144
1006-0145
1006-0146
JET
SIZE
97.5
100
102.5
105
107.5
110
112.5
115
117.5
120
SUG. RETAIL
(EA.)
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
PART #
1006-0147
1006-0148
1006-0149
1006-0150
1006-0151
1006-0152
1006-0153
1006-0154
1006-0155
1006-0156
JET
SIZE
122.5
125
127.5
130
132.5
135
137.5
140
142.5
145
SUG. RETAIL
(EA.)
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
PART #
1006-0157
1006-0158
1006-0159
1006-0160
1006-0161
1006-0162
1006-0163
1006-0164
JET
SIZE
147.5
150
152.5
155
157.5
160
170
190
SUG. RETAIL
(EA.)
$2.95
2.95
2.95
2.95
2.95
2.75
2.75
2.75
KEIHIN-STYLE HEX HEAD (CR PREFIX)
PART #
1006-0165
1006-0166
1006-0167
1006-0168
1006-0169
1006-0170
1006-0171
1006-0172
1006-0173
1006-0174
1006-0175
1006-0176
1006-0177
JET SUG. RETAIL
SIZE
(EA.)
80
$2.95
82
2.95
85
2.95
88
2.95
90
2.95
92
2.95
95
2.95
98
2.95
100
2.95
102
2.95
105
2.95
108
2.95
110
2.95
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
KEIHIN-STYLE SLOT HEAD (KJ PREFIX)
PART #
1006-0127
1006-0128
1006-0129
1006-0130
1006-0131
1006-0132
1006-0133
1006-0134
1006-0135
1006-0136
ENGINE
TRANSMISSION
& DRIVELINE
MIKUNI-STYLE HEX HEAD (HJ PREFIX)
PART #
1006-0055
1006-0056
1006-0057
1006-0058
1006-0059
1006-0060
1006-0061
1006-0062
1006-0063
1006-0064
1006-0065
1006-0066
1006-0067
1006-0068
1006-0069
1006-0070
1006-0071
1006-0072
FUEL/AIR
SYSTEMS
PART #
1006-0178
1006-0179
1006-0180
1006-0181
1006-0182
1006-0183
1006-0184
1006-0185
1006-0186
1006-0187
1006-0188
1006-0189
1006-0190
JET SUG. RETAIL
SIZE
(EA.)
112
$2.95
115
2.95
118
2.95
120
2.95
122
2.95
125
2.95
128
2.95
130
2.95
132
2.95
135
2.95
138
2.95
140
2.95
142
2.95
PART #
1006-0191
1006-0192
1006-0193
1006-0194
1006-0195
1006-0196
1006-0197
1006-0198
1006-0199
1006-0200
1006-0201
1006-0202
1006-0203
JET SUG. RETAIL
SIZE
(EA.)
145
$2.95
148
2.95
150
2.95
152
2.95
155
2.95
158
2.95
160
2.95
162
2.95
165
2.95
168
2.95
170
2.95
172
2.95
175
2.95
PART #
1006-0204
1006-0205
1006-0206
1006-0207
1006-0208
1006-0209
1006-0210
1006-0211
1006-0212
1006-0213
1006-0214
1006-0215
1006-0216
JET SUG. RETAIL
SIZE
(EA.)
178
$2.95
180
2.95
182
2.95
185
2.95
188
2.95
190
2.95
192
2.95
195
2.95
198
2.95
200
2.95
202
2.95
205
2.95
208
2.95
All part numbers in BOLD MAGENTA are new for 2009.
PART #
1006-0217
1006-0218
1006-0219
1006-0220
1006-0221
1006-0222
1006-0223
1006-0224
1006-0225
1006-0226
1006-0227
JET SUG. RETAIL
SIZE
(EA.)
210
$2.95
212
2.95
215
2.95
218
2.95
220
2.95
222
2.95
225
2.95
228
2.95
230
2.95
232
2.95
235
2.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
351
SECTION
6
JET ASSORTMENT KITS FOR HSR42/HSR45/HSR48
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
•HSR42 kit includes 150 through 170 main jets (2 each); 22.5 through 35 pilot jets (2 each); -96, -97 and -98
needles (1 each); 2 #60 a/p nozzles; needle clip; all necessary washers, special jet box
•HSR45 kit includes 165 through 185 main jets (2 each); 20 through 32.5 pilot jets (2 each); -95, -96 and -98
needles (1 each); 2 #60 a/p nozzles; 2 O-rings, 4 jet needle E-rings; all necessary washers
•HSR48 kit includes 180 through 210 main jets (2 each); 20 through 32.5 pilot jets (2 each); -95, -96 and -98 needles (1 each);
2 #60 a/p nozzles; 2 O-rings, 4 jet needle E-rings; all necessary washers
•Some kit component are available separately
PART #
DESCRIPTION
JET KITS
KHS-025
HSR42
1007-0323 HSR45
1007-0322 HSR48
INDIVIDUAL PARTS
1007-03241 Jet washers (4-pk.) for HSR45
SUG.
RETAIL
$109.95
108.95
108.95
.95
PART #
DESCRIPTION
INDIVIDUAL PARTS (CONT)
1007-03271 O-rings (4-pk.) for HSR45
1007-03261 Pump nozzles (4-pk.) for HSR45/48
1007-0325 Needle jet E-rings (4-pk.) for
HSR45/48
1004-0010 -96 needle jet for HSR45/48
SUG.
RETAIL
$3.95
5.95
.95
10.95
KHS-025
PART #
DESCRIPTION
INDIVIDUAL PARTS (CONT)
1004-0011 -98 needle jet for HSR45/48
1005-00121 -32.5 pilot jets (4-pk.) for HSR48
1006-02461 205 main jets (4-pk.) for HSR48
1006-02471 210 main jets (4-pk.) for HSR48
1
SUG.
RETAIL
$10.95
2.95
2.95
2.95
Sold to dealer as a 4-pack; sold to consumer as each.
MAIN JETS FOR HSR CARBS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
•Large round-type head main jets
used in HSR42/45/48 series carbs
•From 150 through 200 in increments of 2.5
•Sold to dealer as 4-pack; sold to consumer as each
•Genuine Mikuni
PART #
KN100604150
KN1006041525
KN100604155
KN1006041575
KN100604160
KN1006041625
KN100604165
KN1006041675
KN100604170
KN1006041725
DESCRIPTION
#150 main jet
#152.5 main jet
#155 main jet
#157.5 main jet
#160 main jet
#162.5 main jet
#165 main jet
#167.5 main jet
#170 main jet
#172.5 main jet
SUG.
RETAIL
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
PART #
KN100604175
KN1006041775
KN100604180
KN1006041825
KN100604185
KN1006041875
KN100604190
KN1006041925
KN100604195
KN100604200
PILOT JETS FOR HSR CARBS
DESCRIPTION
#175 main jet
#177.5 main jet
#180 main jet
#182.5 main jet
#185 main jet
#187.5 main jet
#190 main jet
#192.5 main jet
#195 main jet
#200 main jet
SUG.
RETAIL
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
2.95
POWER X-WING
•Patented air vane requires
no modifications to install
•Acceleration gains from idle
to wide-open throttle
1050-0180
•Dyno tests show 2-5 horsepower gains
and 4-6 ft.-lbs. max torque increases on OEM H-D engines
•Independent tests were conducted on 88”, 96” and 110” engines
•Complements popular air filter system upgrades
PART #
1050-0194
1050-0182
CABLES
1050-0181
BRAKES
1050-0180
1050-0195
1050-0196
1050-0197
1050-0205
FITS MODEL
SUG. RETAIL
08-09 FLHT/FLHX/FLHR/FLTR models
$129.95
06-09 Softail/Dyna, 06-07 FLHT/FLHX/FLHR/FLTR
w/ Delphi EFI
129.95
01-05 Softail, 04-05 Dyna, 02-05 FLHT/FLHR/FLTR,
07-09 XL w/ Delphi EFI
129.95
88-06 models w/ OEM CV carb
129.95
Mikuni HSR 42/45 carbs w/ early style 1.75” H-D adapter
129.95
Mikuni HSR 42/45 carbs w/ late style 2” H-D adapter
129.95
Mikuni HSR 48 carb w/ 2” adapter
129.95
S&S Super E Shorty
129.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
352
•Genuine Mikuni pilot jets
•Sold to dealer as 4-pack; sold to consumer as each
PART #
KVM2848615
KVM28486175
KVM2848620
KVM28486225
KVM2848625
KVM28486275
KVM2848630
DESCRIPTION
#15 pilot jet
#17.5 pilot jet
#20 pilot jet
#22.5 pilot jet
#25 pilot jet
#27.5 pilot jet
#30 pilot jet
SUG.
RETAIL
$2.95
2.95
2.95
2.95
2.95
2.95
2.95
PART #
KVM2848635
KVM2848640
KVM2848645
KVM2848650
KVM2848655
KVM2848660
•Genuine Mikuni jet needles
•Needles are available in a variety of sizes
to suit most applications
•Sold each
HSR42
J8-8DDY01-95
J8-8DDY01-96
J8-8DDY01-97
J8-8DDY01-98
HSR45/48
J8-8CFY02-95
J8-8CFY02-96
J8-8CFY02-97
J8-8CFY02-98
DESCRIPTION
Richest
Richer
Standard
Leaner
SUG.
PART #
DESCRIPTION
RETAIL
1050-0063 For OEM CV Carb
$119.95
1050-0065 For Mikuni HSR 42 carb 119.95
1050-0066 For Mikuni HSR45
119.95
1050-0067 For Mikuni HSR48
119.95
SUG.
PART #
DESCRIPTION
RETAIL
1050-0064 For 06-09 Delphi EFI
(except 08-09 Dresser)$119.95
1050-0118 For 01-05 Delphi EFI 119.95
SUG. RETAIL
$10.95
10.95
10.95
10.95
TURBULATOR
•The turbulator uses a fixed-vane
vortex design that turns your
intake manifold into a violent
mixing chamber
TU-4
•These vanes eliminate heavy
droplets of fuel, fuel stacking
and keep fuel from puddling
TU-1
•The result is no more load or dive spots
– just crisp, clean throttle response throughout the powerband
•Complete atomization also increases fuel mileage and
eliminates stand-off
•Made in the U.S.A.
SUG.
DESCRIPTION
Bendix/Zenith Carbs
S&S B & E series
RETAIL
$14.95
14.95
PART #
TU-4
TU-5
DESCRIPTION
CV carbs
SS Super G
DS-289101
•Provides more horsepower and power
at 1/4 and 1/2 throttle
•Mounts into the backside/airboot side
of the carburetor
•Slices the single air venturi going through the
carburetor into two smaller, faster venturis via the Power Now
“Power Plate™”
•The Power Plate has a precisely positioned hole to drastically increase
the speed of the top and bottom venturis, thus creating more
horsepower and power for your bike
SUG.
RETAIL
$2.95
2.95
2.95
2.95
2.95
2.95
JET NEEDLES
FOR HSR SERIES
CARBURETOR
PART #
TU-1
TU-2
POWER NOW
DESCRIPTION
#35 pilot jet
#40 pilot jet
#45 pilot jet
#50 pilot jet
#55 pilot jet
#60 pilot jet
SUG.
RETAIL
$14.95
14.95
DS-289106
DS-289102
THE SYSTEM II FUEL ATOMIZERS
•Atomizers work as a turbulator to properly mix fuel entering the intake
manifold for better efficiency and performance
•Available to fit various carburetors
•Made in the U.S.A.
SUG.
PART #
DESCRIPTION
RETAIL
5
DS-289101 Atomizer for 38mm Bendix and Keihin with 1 /8” i.d. manifold $18.95
DS-289102 Atomizer for 40mm S&S, Mikuni and Screaming Eagle with
17/8” i.d. manifold
18.95
DS-289106 Atomizer for CV carbs
18.95
KEIHIN CARB ACCELERATOR PUMP KIT
•Removing the float bowl and drilling one hole is all that is required;
no need to remove the carb from the engine
•High-flow accelerator pump will increase fuel flow through the pump,
significantly improving the low-end and mid-range response
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
DS-289096 For any 80-89 Harley models
w/ stock Keihin carburetors
$18.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
FLANGE MOUNT
INTAKE MANIFOLDS
•For mounting an S&S E and
G series carburetor or flange
mount carburetor on a 99-06
Twin Cam motor with S&S or stock cylinder heads
•Will also fit a 84-99 80” Evolution that requires
a manifold with a map sensor port
•Come with a map sensor port and match OEM intake ports
•Made in the U.S.A.
PART #
DESCRIPTION
DS-289146
S&S E-series intake manifold
1050-0046
S&S G-series intake manifold
WINDSHIELDS
FLANGE-MOUNT
INTAKE
MANIFOLDS
SUG. RETAIL
$83.95
83.95
SPIGOT-MOUNT
INTAKE MANIFOLDS
FOR S&S HEADS
•Used to install a stock
CV carburetor on S&S 35/8”,
4” and 41/8” bore motors
•Will also fit S&S Hot Setup and Super Stock™ head kits
•Made in the U.S.A.
•Can be used to replace
stock “compliance fitting”
manifold on 84-89 and
stock rigid-mount manifold from 90-99
•Use with stock or S&S cylinder heads
•For use with stock 5.5550” length cylinders
•Requires the use of S&S intake seals and flanges (sold separately)
PART #
DESCRIPTION
SUG. RETAIL
FOR 84-99 EVOLUTION-STYLE BIG TWIN
1050-0109 For S&S E, L, Super A, B, E, H-D Tillotson, Bendix,
and Keihin carbs (no MAP sensor port)
$83.95
1050-0110 For Super G carbs (no MAP sensor port)
83.95
INTAKE MANIFOLDS
•Available for stock, +.050” and
+.200” longer cylinders
•Compatible with Bendix, Keihin
or S&S Super E, B and G carbs
•79-84 Shovelheads use
rubber-band-type intake seals
•66-78 Shovelheads use O-ring-type intake seals
•Seals sold separately, see Section 9
•Made in the U.S.A.
MANIFOLD
CONVERSION
KIT FOR 80”
EVOLUTION
$73.95
73.95
73.95
•Kit converts stock
80” Evolution manifold
to a more rigid-mount system
•Eliminates cracking and leaking
problems associated with
the stock rubber
compliance fittings
•Includes an S&S Performance
manifold, mounting flanges,
two specially molded O-rings
and two .350” spacers for spacing
out the stock air cleaner or carb mount bracket
•Fits 84-99 80” models if flange-type carburetor or adapter is used
•Replacement flange seals also available
•Made in the U.S.A.
NOTE: Not for use with an S&S G series carb.
PART #
DESCRIPTION
DS-289230
Manifold conversion kit
SUG.
RETAIL
$73.95
73.95
73.95
SEATS &
SISSY BARS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
SUG. RETAIL
$99.95
ELECTRICAL
LIGHTING
PART #
SUPER G
1050-0047
1050-0048
1050-0049
DESCRIPTION
SUG.
RETAIL
Std.
+.050”
+.200”
$73.95
73.95
73.95
FOR L78-84 SHOVELHEADS AND 79-82 XL (W/O VOES) (BAND-TYPE)
PART #
DESCRIPTION
SUPER B AND E
DS-289232 Std.
1001-0007 +.050”
1001-0008 +.200
LUGGAGE
FUEL/AIR
SYSTEMS
FOR 66-E78 SHOVELHEADS AND 57-78 XL (O-RING TYPE)
SUG.
RETAIL
TOURING
EXHAUST
NOTE: Requires the use of S&S manifold O-rings and U-rings,
sold separately.
PART #
ENGINE SIZE
CYLINDER LENGTH
SUG. RETAIL
FOR S&S TWIN CAM STYLE MOTORS AND HEAD KITS
161722
88”/95”
4.9365”
$99.95
161723
107”
5.995”
99.95
161724
116”
5.180”
99.95
FOR S&S BIG TWIN EVOLUTION STYLE MOTORS AND HEAD KITS
161733
88”/107”
5.375”/4.870”
99.95
161734
93”/113”
4.995”
99.95
161736
80”/89”/96”
5.550”
99.95
PART #
DESCRIPTION
SUPER B AND E
DS-289231 Std.
1001-0005 +.050”
1001-0006 +.200”
6
PART #
SUPER G
1050-0050
1050-0051
1050-0052
DESCRIPTION
SUG.
RETAIL
Std.
+.050”
+.200”
$73.95
73.95
73.95
SUG. RETAIL
$28.95
BLACK
FLANGE ADAPTERS
•Rubber flange adapters fit
42mm, 45mm and 48mm spigot-type carburetors
•Includes clamp
•Sold individually
HS42/018-42
PART #
DESCRIPTION
HS42/018-42
42mm, original straight-through design
HS42/018-45
45mm, original straight-through design
HS42/062-48
48mm, original straight-through design
•For use with all current
0934-0665
S&S intake manifolds
•O-rings sold in 10-pack
1003-0060
•U-rings sold each
PART #
DESCRIPTION
SUG. RETAIL (EA.)
O-RINGS (MANIFOLD TO CYLINDER HEADS)
1003-0060
For 84-06 Big Twin and 86-06 Sportster
engines w/ S&S manifold
$3.95
U-RINGS (CV CARB TO MANIFOLD)
0934-0666
40-42mm
14.95
0934-0665
44-45mm
14.95
RUBBER FLANGE
ADAPTERS FOR
SPIGOT-TYPE
CARBURETORS
BILLET FLANGE
ADAPTER FOR
SPIGOT-TYPE CARBS
•Allows you to mount OEM
late-model CV or Mikuni HSR-42 carbs
on Sportsters, Panheads, Shovelheads or early
Evolutions with two-bolt flange manifolds
•CNC-machined from 6061 billet aluminum
•Mounting holes are 2.75” on center
•Can be polished, plated or painted
•Carb-to-manifold seal also available; see section 9
•Made in the U.S.A.; sold each
PART #
DESCRIPTION
DS-289219
Billet flange adapter
HANDLEBARS,
CONTROLS
& MIRRORS
INTAKE MANIFOLD
O-RINGS AND U-RINGS
CHROME INTAKE
MANIFOLD FLANGES
SUG. RETAIL
$26.95
26.95
26.95
All part numbers in BOLD MAGENTA are new for 2009.
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
•Adapters fit 38mm and 40mm
spigot-type carburetors
•Includes clamp
M-VM-36-200
•Sold individually
PART #
DESCRIPTION
SUG. RETAIL
M-VM-36-200
36mm-38mm rubber flange adapter
$17.95
M-VM-38-200
40mm rubber flange adapter – 43mm carb
spigot o.d. (fits RS40, RS42)
17.95
M-VM-40-200
40mm rubber flange adapter – 52mm carb
spigot o.d.
20.95
•Chrome flanges replace the
stock flanges
•Sold in pairs
•Replacement intake manifold seals
also available; see section 9
PART #
DESCRIPTION
DS-289212
For 90-05 Big Twin and 86-06 XL
models
CABLES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$22.95
COVERS,
SECURITY
& GENERAL
353
SECTION
6
WINDSHIELDS
INTAKE
MANIFOLD FLANGES
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
BILLET INTAKE
FLANGES FOR
SCREAMIN’
EAGLE ® THROTTLE BODIES
•Made from high-strength, durable 6061 T-6 billet aluminum to increase
strength and resist problematic cracking at the mounting holes
•Direct replacement for the flanges included with Screamin’ Eagle 50mm
throttle bodies made for 06-07 applications
•Eliminate fatigue cracks and the resultant air leaks in the intake tract
•Kit includes manifold seals
•Made in the U.S.A.
NOTE: Legal in California only for racing vehicles which may never be
used upon a highway.
PART #
DESCRIPTION
SUG. RETAIL
1022-0045
For 06-07 Screamin’ Eagle throttle bodies
OEM #27623-05
$24.95
•Spring steel, chrome-plated
clamp assemblies
•Sturdy clamps are easy to install
•Includes seals
•Sold in pairs
•Replacement seals also available, see Section 9
PART #
DESCRIPTION
DS-203089
For L78-84 Big Twin and 75-85 XL;
repl. OEM #s 27063-80 and 27062-7
SUG. RETAIL
$18.95
1015-0094
CABLES
FRAMES,
SUSPENSION
& FENDERS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
354
SUG. RETAIL
$79.95
•Spring steel, chrome-plated clamp
assemblies with high-quality O-rings
•Sold in pairs
PART #
DESCRIPTION
DS-203094
For 55-E78 Big Twin and XL models;
repl. OEM #s 27063-57 and 27060-55
SUG. RETAIL
$14.95
SUG. RETAIL
$15.95
1015-0095
CV CARBURETOR TOP COVERS
•Machined from 6061 T-6 billet aluminum, polished to a high luster and
chrome-plated
•PART #s 1015-0094 and 1015-0096 relocate choke cable for easier access
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 88-06 CV40/44 CARBURETORS ON BIG TWIN, XL AND BUELL
1015-0093
Smooth w/ logo
$53.95
1015-0094
Smooth w/ logo and choke cable bracket
59.95
1015-0095
Smooth
53.95
1015-0096
Smooth w/ choke cable bracket
59.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
DESCRIPTION
Wild Things intake flanges for 99-05 Twin
Cam cylinder heads (pr.)
•Smooth die-cast chrome
cover replaces the OEM black plastic top cover
•Installation is a snap; just remove the four OEM
screws and bolt on the new cover with them
PART #
DESCRIPTION
DS-288801
For 88-06 Harley CV carb models;
repl. OEM #27040-88
1015-0096
DASHES
& GAUGES
•Now you can install
99-05 style Twin Cam
cylinder heads on 06-07 Twin Cam models
equipped with the Screamin’ Eagle 50mm
throttle body or 06-09 style Wild Things
throttle body
•Use intake flange seals for 50mm Screamin’ Eagle throttle bodies
•Reduced diameter socket head screws are included to ease installation
•Sold in pairs
SMOOTH CHROME
CV CARB TOP COVER
HANDLEBARS,
CONTROLS
& MIRRORS
TANKS &
OIL FILTERS
$4.95
4.95
3.95
INTAKE MANIFOLD
CLAMPS WITH O-RINGS
LIGHTING
BRAKES
1003-0060
SUG. RETAIL (EA.)
WILD THINGS™
INTAKE FLANGES
PART #
1022-0056
INTAKE MANIFOLD
CLAMPS WITH SEALS
1015-0093
•Sold in 5-pack
1001-0019
•Replacement seals also available
PART #
DESCRIPTION
FOR 84-05 BIG TWIN 86-06 SPORTSTER ENGINES
WITH S&S INTAKE MANIFOLD
1001-0019
Front flange; repl. H-D #27009-86B
1001-0020
Rear flange; repl. H-D #27010-86B
1003-0060
Repl. seals (10-pk)
KHS-029
KHS-028
MIKUNI CHROME CARB TOP COVER
•Highly polished chrome cover gives a unique custom look
•Available with or without embossed Mikuni logo
PART #
DESCRIPTION
KHS-029
Cover w/ Mikuni logo
KHS-028
Cover w/o Mikuni logo
SUG. RETAIL
$22.95
22.95
DS-190129
FLOAT BOWL
SPEED SCREW KITS
CARBURETOR
SOCKET-HEAD
BOLT KITS
•Replace the stock screws with strong chrome socket-head bolts
•For use on CV carburetors and S&S carburetors
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
DS-190129 For CV carburetor on 90-06 Big Twin and
88-03 XL models
$25.95
DS-190695 For top cover only on 88-06 CV carburetors
10.95
DS-190697 For S&S E and G carburetor body and air cleaner
31.95
•Electropolished stainless
steel for a great custom look
•Will not corrode in extreme climates
1050-0158
•Longer and stronger than the stock screws,
makes them easier to handle; will not round off
•5/16” hex head design eases bowl removal and jet changing
•Made in the U.S.A.
PART #
DESCRIPTION
1050-0158
For CV/HSR carbs
1050-0159
For S&S B&D carbs
1050-0160
For S&S E&G carbs
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$34.95
34.95
34.95
SECTION
6
WINDSHIELDS
1012-0046
TOURING
1012-0071
LUGGAGE
1012-0037
3-D BILLET BREATHERS
1012-0070
DRILLED BREATHER KITS
•Billet aluminum construction
•Bolt directly into cylinder heads
•Sold in pairs
•All mounting hardware included
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 99-09 TWIN CAM
1012-0070
Chrome
1012-0071
Black anodized
SUG. RETAIL
$108.95
94.95
•CNC-machined from solid aluminum billet, then polished
and treated to a dipping of luscious show chrome
•Three-dimensional CNC engraving on the front
•Foam baffle inside with ample vent slots in the back to
allow engine to breathe freely
•Rear access panel unscrews to allow easy servicing
of foam filter element
•Support brackets and breather bolts must be ordered separately, per
your specific application
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 99-09 TWIN CAM (PR.)
1012-0047
3-D VooDoo breather kit
$199.95
1012-0037
3-D Skull breather kit
199.95
FOR 93-99 EVOLUTION BIG TWIN AND 91-09 XL (PR.)
1012-0046
3-D VooDoo billet breather kit
189.95
1012-0036
3-D Skull breather kit
189.95
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
DS-289187
GASKETS
& SEALS
ELECTRICAL
DS-289002
1012-0049
CHROME
BILLET BREATHERS
LIGHTING
1012-0050
•Breathers are available for use with the H-D breather kit (single breather) or
•Support brackets and breather bolts sold separately
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 99-09 TWIN CAM (PR.)
1012-0049
Finned Bullet
$229.95
1012-0051
Finned Dagger
249.95
DS-289002
Dagger
249.95
DS-289189
Bullet
229.95
FOR 93-99 EVOLUTION BIG TWIN AND 91-09 XL (PR.)
1012-0048
Finned Bullet
214.95
for use with a carburetor support bracket (dual breathers)
PART #
DESCRIPTION
FOR 93-99 EVOLUTION BIG TWIN AND 91-09 XL (PR.) (CONT)
1012-0050
Finned Dagger
DS-289001
Dagger
DS-289188
Bullet
FOR USE WITH H.D. BREATHER KIT
DS-289187
Bullet
•Chromed billet aluminum crankcase
breathers screw directly into cylinder heads
•Allow a clean, simple way for the engine to “breathe” correctly
PART #
DESCRIPTION
SUG. RETAIL
2106-1001
For all 93-99 Evolution Big Twin and 91-09 XL
$99.95
$239.95
239.95
229.95
CABLES
99.95
BRAKES
MALTESE CROSS
TOP BREATHERS
ENGINE BREATHERS
SUG. RETAIL
HANDLEBARS,
CONTROLS
& MIRRORS
1012-0029
CRANK VENTS AND SPACERS
TANKS &
OIL FILTERS
1012-0058
•Sharp styling and billet
aluminum construction
that’s been chrome finished
•Internal filter is easily accessed
when cleaning is required
•Sold each
PART #
DESCRIPTION
1012-0030 For 99-09 Twin Cam
1012-0029 For 93-99 Evolution Big Twin, 91-09 XL
1012-0058 Replacement filter for all Wimmer top-breathers
DASHES
& GAUGES
SUG. RETAIL
$75.95
75.95
11.95
1012-0008
•Unlike any other vent
•Longer stem allows room for most air cleaners
•Check ball and valve ensures one-way flow
•Take blow-by out of the heads or crankcase and suck it out the
vent which allows pressure to be released, improving motor efficiency
•Increase gas mileage, horsepower and life of the motor
•Stem vents are used on Evolution and Twin Cam engines that breathe
through the heads; inline vent is used on models that breathe through the crankcase
1012-0007
•Polished aluminum finish
•Crank vent spacers are required when using stem vents with any Speed’s Performance Plus
1012-0296
high-velocity or Speedy Flow air cleaner kit; can also be used to custom space other crank vents or breathers
•Crank vents sold each; spacer kits include two .300” x .990” spacers and two .615” x .990” spacers with O-rings
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
1012-0007
Inline vent
$90.95 1010-0296
Spacer kit for Twin Cam-style engines
1012-0008
Stem vent (2 required)
110.95 1010-0297
Spacer kit for Evolution-style engines
All part numbers in BOLD MAGENTA are new for 2009.
1012-0297
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$50.95
50.95
COVERS,
SECURITY
& GENERAL
355
SECTION
6
2110-1122
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
2110-1123
POWER VENT™
CRANKCASE BREATHER KITS
•CNC-machined T-6 billet aluminum
•Show-quality polished finish
•One-way valve prevents backflow
•Kits include machined bolts and plastic washers for a tight seal
•Work with most CV carb and EFI applications
•Accept 1/8” NPT fitting
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
2110-1123
For 93-99 80” Evolution
$173.95
2110-1122
For 99-09 Twin Cam
173.95
DS-289600
2110-1124
PART #
2110-1124
DS-289600
DESCRIPTION
For 91-09 XL
For 70-92 80” Big Twin
SUG. RETAIL
$173.95
89.95
1011-0529
ENGINE
DEVONATOR SERIES II
CRANKCASE BREATHER/
SUPPORT BRACKET
KHS-020
TRANSMISSION
& DRIVELINE
KHS-030
GASKETS
& SEALS
ELECTRICAL
LIGHTING
CRANKCASE
BREATHER KITS
•Allow installation of a 40mm or
42/45mm Mikuni “Smoothbore”
carburetor kit on 93-06 Big Twin with the crankcase breather system
PART #
DESCRIPTION
SUG. RETAIL
KHS-020 Breather kit for HSR42/45 carb on Evo Big Twin
$74.95
KHS-030 Breather kit for HSR42/45 carb on Twin Cam
74.95
•Self-contained breather system
•6061 T-6 aircraft
aluminum construction
•Breathing is routed through the
unit and into the throat of the
carburetor track; minimizes oil
in the intake tract
•Fits Harley-Davidson and Buell
models with CV carb or Delphi EFI
•Chrome finish
•Uses factory breather bolts
•O-rings, gasket and mounting screws included
PART #
DESCRIPTION
1011-0529
For 91-06 XL models
1011-0530
For 92-99 Evolution
1011-0531
For 99-09 Twin Cam (except 08-09 Dressers)
SUG. RETAIL
$192.95
192.95
192.95
HANDLEBARS,
CONTROLS
& MIRRORS
DEVONATOR SERIES CRANKCASE BREATHER
•Competition style, brushed billet aluminum breather designed to follow
the contour of the heads
•Vents atmospherically through a hose barb in the back of the unit
•Design efficiency virtually eliminates both oil in the air cleaner box and nagging oil consumption associated
with standard vented breathers
•Requires 1/2” i.d. breather hose
PART #
DESCRIPTION
SUG. RETAIL
and carb support bracket
DS-289116
For 91-09 XL models
$149.95
•Made in the U.S.A.
CABLES
BRAKES
TANKS &
OIL FILTERS
1012-0102
1012-0100
1012-0097
1012-0101
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
1012-0099
FOOTRESTS
& LICENSE
SUPPORT BRACKET CRANKCASE
PLATE FRAMES BREATHER CONVERSION KIT
•Adapts to all Wimmer intakes to eliminate external breathers
TIRES,
•Internal passageways route oil back to carb or throttle body
TUBES &
•Twin Cam applications re-use existing breather bolts;
Evolution applications include new breather bolts
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
356
NOTE: For use with Wimmer intakes only
PART #
DESCRIPTION
1012-0100 For 99-09 Twin Cam motors using a CV carb/Delphi EFI
and Wimmer intake (except 08 Dressers)
1012-0101 For 99-06 Twin Cam motors using a Mikuni carb and
Wimmer intake
1012-0102 For 99-06 Twin Cam motors using a S&S carb and
Wimmer intake
1012-0098
SUG.
RETAIL
$88.95
108.95
93.95
PART #
DESCRIPTION
1012-0097 For 93-99 Evolution motors using a CV carb and
Wimmer intake
1012-0098 For 93-99 Evolution motors using a Mikuni carb and
Wimmer intake
1012-0099 For 93-99 Evolution motors using a S&S carb and
Wimmer intake
All part numbers in BOLD MAGENTA are new for 2009.
SUG.
RETAIL
$134.95
153.95
139.95
SECTION
1012-0089
7807-0013
1012-0092
6
WINDSHIELDS
TOURING
CARB SUPPORT BRACKET/
BREATHER KITS
•Billet aluminum construction
with a chrome, black or wrinkle-black finish
•Clean, one-piece design support bracket and breather kit
•Crankcase breathes back into the carb or throttle
body so no external lines are necessary
•Allow custom air cleaners or velocity stacks to be installed in a
horizontal or vertical position; no other adapters are required
•Include installation hardware
PART #
DESCRIPTION
SUG. RETAIL
93-09 BIG TWIN
1012-0095
08-09 FLHT, FLHR models, chrome
$247.95
7807-0012
40mm CV carb or Delphi EFI (01-09 FXST, FLST,
04-09 Dyna Glide and 02-07 FLT), chrome
166.95
1012-0089
40mm CV carb or Delphi EFI (01-09 FXST, FLST,
166.95
04-09 Dyna Glide and 02-07 FLT), black
1012-0090
40mm CV carb or Delphi EFI (01-09 FXST, FLST,
166.95
04-09 Dyna Glide and 02-07 FLT), wrinkle black
S&S E or G carb, chrome
172.95
7807-00131
LUGGAGE
7807-0014
SEATS &
SISSY BARS
1012-0093
PART #
DESCRIPTION
93-09 BIG TWIN (CONT)
1012-00911
S&S E or G carb, black
1012-00921
S&S E or G carb, wrinkle black
93-99 EVOLUTION BIG TWIN
7807-0014
Mikuni 42/45/48 carb, chrome
1012-0093
Mikuni 42/45/48 carb, black
1012-0094
Mikuni 42/45/48 carb, wrinkle black
1
SUG. RETAIL
$172.95
172.95
EXHAUST
197.95
197.95
197.95
FUEL/AIR
SYSTEMS
Not for 100” S&S motors.
ENGINE
CARB SUPPORT
BRACKET WITH
BREATHER SYSTEM
•Billet aluminum with
chrome finish
•Clean, one-piece design
support bracket with
internal breather system
•Crankcase breathes back into the carb
or throttle body so no external lines
are necessary
•Accepts most CV/Delphi EFI-style air cleaners
•Includes installation hardware
PART #
DESCRIPTION
FOR 93-09 BIG TWIN (EXCEPT 08-09 DRESSER)
1012-0079
For S&S E/G carb, Evolution
1012-0080
For S&S E/G carb, Twin Cam
1012-0081
For CV carb, Evolution
1012-0082
For CV carb/Delphi EFI Twin Cam
1012-0083
For Mikuni HSR 42mm, Evolution
1012-0084
For Mikuni HSR 42mm, Twin Cam
TRANSMISSION
& DRIVELINE
CHROME
CRANKCASE BREATHER
1012-0081
SUG. RETAIL
$304.95
304.95
304.95
304.95
304.95
304.95
•With this breather, as oil-laden air
condenses in the breather body,
the excess oil now runs back down
into the engine rather than into
the air cleaner
•A really clean setup
PART #
DESCRIPTION
1012-0073 For 99-06 Twin Cam w/ C.V. carb
1012-0072 For 93-99 Evolution Big Twin
GASKETS
& SEALS
SUG. RETAIL
$59.95
59.95
ELECTRICAL
LIGHTING
2110-0316
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
DS-289620
CRANKCASE
BREATHER KIT
•Maximum efficiency in
crankcase ventilation
•Bolts directly to carburetor/brace;
no exposed filter
•For CV/HSR42 carbs
PART #
DESCRIPTION
DS-289147
93-99 80” Big Twin, 91-06 XL
CRANKCASE BREATHER KIT
BRAKES
•One-piece chrome tube design
•Comes with breather bolts, washers and hardware
•Works with most aftermarket air cleaners
SUG. RETAIL
$26.95
PART #
DS-289620
2110-0316
DESCRIPTION
For 93-07 Big Twin
For 91-09 XL
SUG. RETAIL
$32.95
29.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
DS-289060
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-289082
1013-0030
TIRES,
TUBES &
WHEELS
CRANKCASE BREATHER/
SUPPORT BRACKET KITS
•Kit allows the installation of aftermarket air cleaner assemblies on late model bikes equipped
with OEM CV carb or Delphi EFI system
•Includes bracket, filter, hose and all mounting hardware necessary for installation except where noted
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
DS-289082 Fits all 93-09 Big Twin models (except 08-09 Dressers)
$64.95 DS-289126 Fits 91-06 XL models
DS-289060 Fits 93-09 Big Twin models (no hose or filter)
DS-289073 Repl. filter
(except 08-09 Dressers)
54.95
1013-0030 Fits 07-09 XL models
58.95
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$58.95
12.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
357
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
AIR CLEANER
BREATHER KIT
BRAIDED HOSE
CRANKCASE
BREATHER KIT
•Enables the mounting
of most aftermarket air
cleaners to late-style
engines that breathe
through the cylinder heads
•Fittings can be rotated 360°
so that hoses can be routed
as necessary
•Hose sold separately
PART #
DESCRIPTION
DS-289055
For 93-09 Big Twin and 91-09 XL models
•This kit provides the best
looking alternative to black
rubber hoses when mounting
a crankcase breather system
•Features a 3/8” i.d. stainless
steel braided hose crimped
onto chrome banjo fittings
•Outlet side of assembly is long enough to custom-route the hose
and mount the breather filter in an inconspicuous location
•Includes breather filter (with mounting stud), hardware and instructions
•Air cleaner and carb support bracket must be purchased separately
FUEL/AIR
SYSTEMS
SUG. RETAIL
$45.95
NOTE: Not recommended for stock applications. Make sure the braided
line does not contact anything, i.e. the gas tank, carb or wiring, as
damage may result.
PART #
DESCRIPTION
SUG. RETAIL
DS-289118
For 93-09 Big Twin custom applications only
$66.95
1012-0019
1012-0016
BREATHER BOLT KITS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
31/4” CUT-TO-LENGTH CHROME
BREATHER BOLT KITS
•Solve the problem when mounting a carb
support bracket
•Available in two styles and three sizes
•Sold in pairs
SUG.
PART #
DESCRIPTION RETAIL PART #
DESCRIPTION
POINTED
BUTTONHEAD
1/2”-13
1/2”-13
1012-0014
$67.95 1012-0017
3/8”-16
3/8”-16
67.95 1012-0018
1012-0015
5/16”-18
5/16”-18
1012-0016
67.95 1012-0019
SUG.
RETAIL
$67.95
67.95
67.95
•Chrome-plated button-head
bolts fit most support brackets
and breathers
•Kit for 93-99 Evolution-style
engines comes with two
1/2”-13 x 13/4” bolts, four thick
aluminum washers and four
stainless steel washers
•Kit for 99-09 Twin Cam-style
engines comes with two 3/8”-16
x 13/4” coarse-thread bolts, six
stepped aluminum washers and
four stainless steel washers
•Made in the U.S.A.
PART #
DESCRIPTION
1012-0038
For 93-99 Evolution
1012-0039
For 99-09 Twin Cam
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
DS-289611
DS-289612
BREATHER BOLT KITS
•Designed specifically for
Novello velocity stacks with
one-piece support
and breather
•Kits include two chrome
spacers, two stainless steel
polished bolts and six shims
•Give a clean, open look to the carb
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
358
DS-289610
CUSTOM BREATHER BOLTS
PART #
DESCRIPTION
SUG. RETAIL
1012-0009 1/2” Evolution bolt kit for
S&S/CV carbs (2.5” long)
$79.95
1012-0010 5/16” Twin Cam bolt kit for
S&S/CV carbs (2.5” long)
79.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
SUG. RETAIL
$39.95
49.95
1012-0009
CABLES
BRAKES
1012-0039
DS-289614
DS-289613
HANDLEBARS,
CONTROLS
& MIRRORS
1012-0038
•CNC-machined 17/16” polished stainless steel bolts
•Fit most support brackets and breathers
•Sold in pairs with washers
•Replacement washers available separately
PART #
DESCRIPTION
SUG. RETAIL
5/16” TWIN CAM BOLTS
DS-289611 Hex head
$36.95
DS-289613 Button head
36.95
DS-289614 Repl. washers (10-pk.)
6.95
PART #
DESCRIPTION
1/2” EVOLUTION BOLTS
DS-289610 Hex head
DS-289612 Button head
DS-289614 Repl. washers (10-pk.)
SUG. RETAIL
$36.95
36.95
6.95
SPECIALTY BREATHER
BOLTS WITH BOLT STANDS
1012-0003
•High-quality CNC-machined stainless steel bolts
•Unique 3/4” long threaded bolt standoff
(machined into the bolt head) provides a secure mounting
bracket attachment point for accessories off the cylinder head breather outlets
•When used with spacers (not included) an infinite range of locations can be adapted between the air
cleaner backplate and cylinder heads
•Package includes two breather bolts, two 3/8” button head bolts, two flat washers and eight
nylon washers
PART #
DESCRIPTION
SUG. RETAIL
1/2”
1012-0003
For 93-99 Evolution
$44.95
5/16”
1012-0004
For 99-09 Twin Cam
44.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
6
WINDSHIELDS
THREAD REDUCER
•Used on 93-99 H-D cylinder
heads when installing a carburetor support
bracket that requires 5/16”-18 mounting bolts
•Reduces a 1/2”-13 threaded hole to 5/16”-18
•Sold each; two required per motor
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
1/2”-13 to 5/16”-18
7806-2940
thread reducer
$5.95
TOURING
THREAD REDUCER
BREATHER
BOLT
WASHER KIT
•Converts an Evo motor (1/2”-13 thread pitch) to
fit any Wimmer intake that is listed for a Twin
Cam motor (3/8”-16 thread pitch)
•Sold each; two required per motor
PART #
DESCRIPTION
SUG. RETAIL
1012-0096 1/2”-13 thread reducer
$11.95
•Features four 5/16”
and four 1/2” aluminum
centering washers
•Also includes four nylon sealing washers
PART #
DESCRIPTION
SUG. RETAIL
1012-0005 For 91-09 breather systems
$7.95
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
BREATHER SHOP SERVICE KIT
•Includes all gaskets, seals and O-ring to service
OEM breather systems
•Made in the U.S.A
PART #
DESCRIPTION
SUG. RETAIL
0934-0942
Breather service kit
$9.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
DS-289190
DS-289053
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
1013-0017
DS-289062
CABLES
BRAKES
AIR CLEANER BRACES
CARB SUPPORT
BRACKET WITH
CHOKE CABLE MOUNT
•Chrome-plated stamped steel
•Provides support for carb and air cleaner
•Offers mounting of choke control under the carb
for easy access
PART #
DESCRIPTION
2110-1212
For 92-06 Big Twin w/ Mikuni HSR 42/45 carb
SUG. RETAIL
$29.95
•Chrome air cleaner braces provide additional support for the
Dragtron™ II air cleaners or any flat-backed air cleaners
•Mount to the cylinder heads
•Can be used in conjunction with most breather kits (where applicable)
•Breather kits/bolts sold separately
•All gaskets and mounting hardware included
•For replacement gaskets see Gaskets & Seals section
PART #
DESCRIPTION
SUG. RETAIL
DS-289190 For 90-09 Big Twin (except 08-09 Dressers)
(CV carb/Delphi EFI.)
$29.95
DS-289053 For 84-89 Big Twin Evolution (butterfly carb.)
24.95
1013-0017 For 07-09 XL
24.95
DS-289062 For 88-06 XL
24.95
AIR CLEANER
BRACES FOR
SHOVELHEAD, XL
ADJUSTABLE CARBURETOR
SUPPORT BRACKET
•Adjusts from 51/4” to 63/8”
•Mounts from the center case
bolt between cylinders to the
lower flange mount of the manifold
•Made in the U.S.A.
PART #
DESCRIPTION
160471
Support bracket
SUG. RETAIL
$15.95
•Use with our Dragtron™ air cleaners to
eliminate carb vibration, which can lead
to air leaks
•Includes hardware and template
•Must use either DS-289104 block or OEM insulator
•Chromed steel support braces fit models equipped
with Bendix or Keihin carbs
PART #
DESCRIPTION
DS-289092
Air cleaner brace for 66-84 Shovelhead
DS-289094
Air cleaner brace for 57-85 XL
All part numbers in BOLD MAGENTA are new for 2009.
DS-289094
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
DS-289092
SUG. RETAIL
$9.95
9.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
359
SECTION
6
WINDSHIELDS
1015-0086
TOURING
DRAG SPECIALTIES DESIGN AIR CLEANERS
LUGGAGE
1015-0104
•Chrome air cleaner kit with spear- or twister-style cone designed exclusively for Drag Specialties
•Increases airflow approximately 10% more than an OEM air cleaner
•Includes filter cone with 360° slots, K&N air filter, 90° chrome elbow and installation hardware
•Will accept D&M Bullet replacement cones
•Requires the use of a carb support bracket and breather kit (sold separately)
•Optional adapters allow mounting on various carbs and Magneti fuel-injection systems
PART #
DESCRIPTION
SUG. RETAIL
FOR 90-06 BIG TWIN AND 88-06 XL WITH 40MM CV CARB OR 01-09 DELPHI EFI (EXCEPT 08-09 DRESSERS)
1015-0086
Drag Specialties Spear air cleaner
$489.95
1015-0104
Drag Specialties Twister air cleaner
538.95
7807-0018
Repl. air filter
70.95
SEATS &
SISSY BARS
EXHAUST
7807-0016
7807-0017
FUEL/AIR
SYSTEMS
1015-0062
ENGINE
1015-0061
TRANSMISSION
& DRIVELINE
1015-0067
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
1015-0071
1015-0066
THE BULLET AIR CLEANERS
•Chrome air cleaner with a bullet-shaped cone with slots in 180° or 360° style
•Increases airflow approximately 10% more than an OEM air cleaner
•Includes bullet-shaped filter cone, K&N air filter, 90° elbow and installation hardware
•Available with black or chrome elbow
•Diamond-cut cones also available; scalloped design
•Requires the use of a carb-support bracket and breather kit (sold separately)
1015-0074
FOR 90-06 BIG TWIN AND 88-06 XL WITH 40MM CV CARB OR 01-09 DELPHI EFI (EXCEPT 08-09 DRESSERS)
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
WITH CHROME ELBOW
WITH BLACK ELBOW
7807-0016
Chrome cone, 180° slots
$489.95 7807-0015
Chrome cone, 360° slots
7807-0017
Chrome cone, 360° slots
489.95 1015-0065
Wrinkle black cone, 360° slots
1015-0060
Red cone, 360° slots
489.95 1015-0066
Black cone, 360° slots
1015-0061
Green cone, 360° slots
489.95 1015-0072
Wrinkle black diamond-cut cone, 360° slots
1015-0062
Blue cone, 360° slots
489.95 1015-0073
Black diamond-cut cone, 360° slots
1015-0064
Black cone, 360° slots
483.95 REPLACEMENT/OPTIONAL CONES AND FILTER
1015-0067
Red diamond-cut cone, 360° slots
594.95 1015-0074
Chrome cone, 360° slots
1015-0068
Green diamond-cut cone, 360° slots
594.95 1015-0081
Red diamond-cut cone, 360° slots
1015-0069
Blue diamond-cut cone, 360° slots
594.95 7807-0018
Repl. air filter
1015-0071
Black diamond-cut cone, 360° slots
594.95
1015-0081
SUG. RETAIL
$489.95
489.95
489.95
594.95
594.95
288.95
378.95
70.95
BRAKES
DS-289544
TANKS &
OIL FILTERS
1015-0106
DS-289543
1015-0017
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
360
1015-0107
POWER FLOW AIR CLEANERS
•Provides the latest look and performance of forward-style intake systems 1015-0025
1015-0026
•Increases airflow approximately 20% more than an OEM air cleaner
•Can be installed horizontally or vertically when using a 3.5-gallon Fat Bob or smaller fuel tank; vertical adapter sold separately
•Requires carburetor support bracket and breather kit; sold separately
•Includes a CNC-machined billet filter cone with tapered, straight, Vindicator or Superslot slots, a 90° elbow, K&N air filter, gasket, hardware and wrench
•Replacement/optional cones available with straight or tapered slots
•Diamond-cut cones also available; feature unique diamond-cut design on the edges of the slot openings
•Optional adapters allow mounting on various carbs and Magneti fuel-injection systems
FOR 90-06 BIG TWIN AND 88-06 XL WITH 40MM CV CARB OR 01-09 DELPHI EFI (EXCEPT 08-09 DRESSERS)
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
WITH CHROME ELBOW
WITH CHROME ELBOW (CONT)
1015-0106 Chrome cone, Vindicator
$489.95 1015-0017 Green cone, tapered slots
1015-0107 Chrome cone, Superslot
489.95 1015-0019 Wrinkle black cone, tapered slots
DS-289544 Chrome cone, straight slots
489.95 1015-0020 Black cone, tapered slots
1015-0011 Blue cone, straight slots
489.95 1015-0023 Red diamond-cut cone, straight slots
1015-0013 Black cone, straight slots
489.95 1015-0025 Blue diamond-cut cone, straight slots
DS-289543 Chrome cone, tapered slots
489.95 1015-0026 Wrinkle black diamond-cut cone, straight slots
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$489.95
489.95
489.95
594.95
594.95
594.95
SECTION
6
WINDSHIELDS
POWER FLOW AIR CLEANERS (CONT)
1015-0030
TOURING
1015-0021
DS-289546
LUGGAGE
1015-0027
1015-0036
1015-0014
FOR 90-06 BIG TWIN AND 88-06 XL WITH 40MM CV CARB OR 01-09 DELPHI EFI (EXCEPT 08-09 DRESSERS) (CONT)
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
WITH CHROME ELBOW (CONT)
WITH BLACK ELBOW (CONT)
1015-0027 Black diamond-cut cone, straight slots
$594.95 1015-0022 Black cone, tapered slots
1015-0030 Red diamond-cut cone, tapered slots
594.95 1015-0028 Wrinkle black diamond-cut cone, straight slots
1015-0032 Blue diamond-cut cone, tapered slots
594.95 1015-0029 Black diamond-cut cone, straight slots
1015-0034 Black diamond-cut cone, tapered slots
594.95 1015-0035 Wrinkle black diamond-cut cone, tapered slots
WITH BLACK ELBOW
1015-0036 Black diamond-cut cone, tapered slots
DS-289546 Chrome cone, straight slots
489.95 REPLACEMENT/OPTIONAL CONES AND FILTER
1015-0014 Wrinkle black cone, straight slots
489.95 1015-0037 Chrome cone, straight slots
1015-0015 Black cone, straight slots
489.95 1015-0043 Chrome cone, tapered slots
DS-289545 Chrome cone, tapered slots
489.95 DS-289549 Repl. air filter
1015-0021 Wrinkle black cone, tapered slots
489.95
1015-0037
SUG. RETAIL
$489.95
594.95
594.95
594.95
594.95
288.95
288.95
70.95
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
7807-0011
GASKETS
& SEALS
1015-0092
7807-0010
ELECTRICAL
MINI POWER FLOW AIR CLEANERS
1015-0088
•Same great features as the Power Flow air cleaners except smaller
•Increases airflow approximately 10% more than OEM air cleaners
•Works great on FLT models with lowers
•Available in tapered-slot style with a chrome or black elbow
•Includes a CNC-machined, chrome billet filter cone, 90° elbow, K&N filter
and installation hardware
•Requires the use of a carb support bracket and breather kit
(sold separately)
PART #
DESCRIPTION
SUG. RETAIL
FOR 90-06 BIG TWIN AND 88-06 XL WITH CV CARB OR 01-09 DELPHI EFI
(EXCEPT 08-09 DRESSERS)
7807-0010
Black elbow
$489.95
7807-0011
Chrome elbow
489.95
7807-0018
Repl. air filter
70.95
1012-0013
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
1015-0090
FORWARD-FACING CARB AIR CLEANERS
•Bullet and Power Flow air cleaners with chrome cones for
forward-facing carbs
•Bullet increases airflow approximately 10% higher than OEM air cleaners
•Power Flow increases airflow 20% higher than OEM air cleaners
CABLES
NOTE: Support bracket and breather kit sold separately.
PART #
FOR S&S SINGLE CARBS
1015-0088
1015-0090
1015-0092
DESCRIPTION
SUG. RETAIL
Power Flow w/ straight slots
Power Flow w/ tapered slots
Bullet w/ 360° slots
$332.95
332.95
332.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
DS-289547
FRAMES,
SUSPENSION
& FENDERS
1012-0011
FOOTRESTS
& LICENSE
PLATE FRAMES
1015-0108
1015-0109
HUSTLER AIR CLEANERS
HS42/001-K
AIR CLEANER ADAPTERS
•For D&M Power Flow, Bullet, Hustler and Drag Specialties air cleaners
PART #
DESCRIPTION
SUG. RETAIL
OPTIONAL ADAPTERS
1012-0011 S&S Super D carburetor (vertical or horizontal)
$100.95
233.95
1012-0013 Magneti Twin Cam fuel-injection system (horizontal)
7807-0118 S&S E and G carburetor (vertical or horizontal)
41.95
HS42/001-K Mikuni carburetor (horizontal)
18.95
DS-289547 40mm CV carburetor (vertical)
39.95
•Increases airflow approximately 10% more than an OEM air cleaner and
increases air velocity
•Requires carburetor support bracket and breather kit; sold separately
•Includes a CNC-machined billet cover, Maltese cross or slotted insert,
a 90° elbow, K&N air filter, gasket, hardware and wrench
•Optional adapters allow mounting on various carbs and Magneti
fuel-injection systems
PART #
DESCRIPTION
FOR 90-06 BIG TWIN AND 88-06 XL WITH 40MM CV CARB
OR 01-09 DELPHI EFI (EXCEPT 08-09 DRESSERS)
1015-0108
W/ Maltese cross insert
1015-0109
W/ slotted insert
All part numbers in BOLD MAGENTA are new for 2009.
TIRES,
TUBES &
WHEELS
SUG. RETAIL
HARDWARE,
CHEMICALS
& TOOLS
$547.95
547.95
COVERS,
SECURITY
& GENERAL
361
SECTION
6
WINDSHIELDS
1010-0129
TOURING
1010-0209
1011-0888
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
SPIKE AIR INTAKES
•Quality billet construction and a hot design
•Greater airflow over stock applications
•Superior strength and a show-quality chrome finish
•Internal filter is easily accessible for cleaning
•Mikuni adapter converts Wimmer Spike intakes for 99-06 Twin Cam with CV carbs to fit 99-06 Twin Cam with HSR Mikuni carbs
•Made in the U.S.A.
PART #
DESCRIPTION
1010-0126 For S&S E and G series, 92-99 80” Big Twin,
and S&S 96”, 107” and 113” motors
1010-0127 For Mikuni 42/45/48, 92-99 80” Big Twin
1010-0128 For 99-07 CV/ Delphi EFI, Twin Cam
SUG. RETAIL
$725.95
725.95
725.95
PART #
1010-0129
1011-0888
1010-0209
DESCRIPTION
SUG. RETAIL
For S&S E and G series, S&S 111”/117”/124” motors
$725.95
Replacement filter for all Spike air intakes
61.95
Mikuni adapter
73.95
1010-0201
ENGINE
1010-0057
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
90° SUPER FILTER INTAKE
•Chrome-plated aluminum support
bracket and breather system
•Patented, washable breather filters
•Air filter provides 236 sq. in. of filtering surface
•Can be mounted in a horizontal or vertical position
•Mikuni adapter converts Wimmer Super Filter intakes for 99-06 Twin
Cam with CV carbs to fit 99-06 Twin Cam with HSR Mikuni carbs
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
1010-0057 For HSR Mikuni, 92-99 80” Big Twin
$520.95
1010-0058 For S&S E and G series, 92-99 80” Big Twin,
and S&S 96”, 107” and 113” motors
520.95
1010-0201 For S&S E and G series, S&S 111”/117”/124” motors
520.95
1011-0887
1010-0209
PART #
1010-0059
1011-0887
1010-0209
DESCRIPTION
For 99-07 CV/ Delphi EFI, Twin Cam
Replacement filter for all Super filter intakes
Mikuni adapter
SUG. RETAIL
$520.95
75.95
73.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
MINI-MAX INTAKE
BRAKES
TANKS &
OIL FILTERS
•Features a chrome-plated aluminum support
brace and breather system
•Patented washable breather filters included
1010-0051
•Air filter provides 252 sq. in. of waterproof
filtering surface
•Mikuni adapter converts Wimmer Mini-Max
intakes for 99-06 Twin Cam with CV carbs to fit 99-06 Twin Cam with HSR Mikuni carbs
•Made in the U.S.A.
1011-0886
1010-0209
NOTE: Not recommended for motors over 96”
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
NOTE: Applications listed will not fit S&S 111”, 117” or 124” motors.
PART #
1010-0051
1010-0052
DESCRIPTION
For HSR Mikuni, 92-99 80” Big Twin
For S&S E and G series, 92-99 80” Big Twin,
and S&S 96” motors
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
362
SUG. RETAIL
$416.95
416.95
PART #
1010-0053
1011-0886
1010-0209
DESCRIPTION
For 99-07 CV/ Delphi EFI, Twin Cam
Replacement filter for all Mini-Max air intakes
Mikuni adapter
SUG. RETAIL
$416.95
55.95
73.95
1010-0122
NESS-TECH®
90° AIR FILTERS
•Carved from billet
aluminum and then
beautifully chrome-plated
•Feature patented “Big Sucker”
breather technology
1010-0120
SUG.
RETAIL
PART #
DESCRIPTION
1010-0120
For Evolution and Twin Cam motors
w/ CV carb or 01-05 Delphi EFI
$302.95
PART #
DESCRIPTION
1010-0121
For 107” and under S&S motors
w/ S&S carb
SUG.
RETAIL
PART #
DESCRIPTION
1010-0122
For 111”-124” S&S motors
w/ S&S carb (except 113”)
$302.95
All part numbers in BOLD MAGENTA are new for 2009.
SUG.
RETAIL
$302.95
SECTION
6
WINDSHIELDS
2110-6969
DS-288764
TOURING
1010-0239
LUGGAGE
1010-0241
DOMINATOR AND DOMINATOR XL FORCEWINDER KITS
•Air intake kits include a polished Dominator breather bracket,
Forcewinder polished air intake manifold, K&N filter, black pre-filter sock
and all necessary hardware
•Pro series models also include a Force Pro Series Billet air filter
DOMINATOR FOR BIG TWINS
PART #
DESCRIPTION
SUG. RETAIL
FOR 92-99 EVOLUTION BIG TWIN W/ CV CARB
1010-0239
Dominator
$412.95
1010-0241
Dominator pro
524.95
FOR 92-99 EVOLUTION BIG TWIN W/ MIKUNI 42/45/48 CARB
1010-0242
Dominator
503.95
1010-0244
Dominator pro
576.95
FOR 92-99 EVOLUTION BIG TWIN W/ S&S E/G CARB
1010-0246
Dominator
503.95
1010-0247
Dominator pro
576.95
FOR 99-06 TWIN CAM W/ CV CARB & 01-09 TWIN CAM W/ DELPHI EFI
(EXCEPT 08-09 DRESSER)
1010-0248
Dominator
412.95
1010-0249
Dominator pro
524.95
FOR 99-06 TWIN CAM W/ MIKUNI 42/45/48 CARB
1010-0250
Dominator
503.95
1010-0251
Dominator pro
576.95
FOR 99-06 TWIN CAM W/ S&S E/G CARB
1010-0252
Dominator
503.95
1010-0253
Dominator pro
576.95
DOMINATOR XL FOR SPORTSTER
PART #
DESCRIPTION
FOR 88-06 SPORTSTER W/ CV CARB
1010-0254
Dominator
1010-0255
Dominator pro
FOR 86-06 SPORTSTER EVO W/ MIKUNI 42/45/48 CARB
1010-0256
Dominator
1010-0257
Dominator pro
FOR 86-06 SPORTSTER W/ S&S E/G CARB
1010-0258
Dominator
1010-0259
Dominator pro
SUG. RETAIL
$412.95
524.95
503.95
576.95
503.95
576.95
2110-1913
FORCEWINDER XR-2 AIR CLEANER/BREATHER KITS
•Second generation Forcewinder kits
•99-06 Twin Cam carburetor models, 01-06 Delphi fuel-injected models
include a 90° cast elbow, cone-shaped air filter, dry sock, mounting
hardware and breather line kit that feeds back into the air cleaner
(requires support bracket PART #DS-289190 for Big Twin and PART
#DS-289062 for XL models; must be purchased separately)
•95-01 FLT models include a 90° cast elbow, cone-shaped air filter, dry sock,
support bracket, mounting hardware and a breather line that feeds back
into the air cleaner
•Optional adapter kits allow mounting of systems to S&S or Mikuni carbs
•Made in U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 99-06 TWIN CAM CARBURETED MODELS
DS-288763
Polished
$341.95
DS-288764
Black
406.95
FOR 01-09 FXST/FLST; 04-09 FXD/FXDWG AND
02-07 FLT FUEL-INJECTED MODELS
DS-288763
Polished
341.95
DS-288764
Black
406.95
2110-1914
Wrinkle black
406.95
FOR 92-99 80” EVOLUTION CARBURETED MODELS
DS-288760
Polished
341.95
DS-288761
Black
406.95
FOR 99-01 FLT FUEL-INJECTED MODELS
2110-6969
Polished
319.95
FOR 91-06 XL AND 95-02 BUELL (CARB) MODELS
DS-288769
Polished
341.95
DS-288779
Black
427.95
FOR 99-02 FUEL-INJECTED BUELL MODELS
DS-288766
Polished
362.95
DS-288767
Black
429.95
REPLACEMENT COMPONENTS
1011-0006
Short XR-2 air filter (3.25” long)
73.95
1011-0007
Repl. Force air filter for V-Rods
73.95
DS-288791
Repl. Force air filter
73.95
DS-288792
Repl. Force air dry charger sock
32.95
FORCEWINDER PRO BILLET
SERIES AIR FILTER
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
•Patterned after the Original Forcewinder
air filter
•Comes pre-oiled and ready for installation
•Made from billet aluminum with a polished finish
•Fits XR air intake systems only
PART #
DESCRIPTION
1011-0896
Pro billet series air filter
TANKS &
OIL FILTERS
SUG. RETAIL
$151.95
DS-288922
FORCEWINDER XR AIR INTAKE SYSTEMS
•Kit includes 90° cast aluminum elbow, K&N air filter, black dry charger
sock, K&N crankcase breather filter, 3/16” Allen screws, intake gasket,
cable ties, a 30” vent hose and instructions
•Requires the use of carburetor-support bracket/breather kit
(sold separately)
•Optional adapter kits allow mounting of systems to S&S or Mikuni carbs
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 90-06 BIG TWIN/XL MODELS W/ 40MM CV CARB, 01-09 BIG TWIN
AND 07-09 XL W/ DELPHI EFI (EXCEPT 08-09 DRESSERS)
2110-1913
Wrinkle black
$263.95
DS-288923
Black
263.95
DS-288922
Polished
219.95
FOR 97-02 M2, 95-96 S2, 96-98 S1, S1W AND 96-98 S3 BUELL MODELS
W/ 40MM CV CARBURETORS
DS-288913
Polished
245.95
DS-288914
Black
282.95
REPL. COMPONENTS
DS-289239
Repl. air filter
73.95
DS-288792
Dry charger sock
32.95
SEATS &
SISSY BARS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
2104-1904
2104-1902
FORCEWINDER AIR CLEANER ADAPTERS
•Used to mount Forcewinder XR/Forcewinder XR-2 air cleaners to S&S E
and G carburetors and Mikuni HSR 42/45/48mm carburetors
•Carb to air cleaner gasket (5-pk) is available separately; PART #DS-173249
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR S&S E AND G CARBS
2104-1904
Polished adapter
$59.95
DS-288921
Natural adapter
37.95
FOR HSR MIKUNI CARBS
2104-1902
Fits 42/45mm carb (polished)
59.95
2104-1903
Fits 48mm carb (polished)
59.95
All part numbers in BOLD MAGENTA are new for 2009.
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
363
SECTION
6
1010-0152
WINDSHIELDS
1010-0345
TOURING
1010-0344
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
CORSAIR AIR CLEANER KITS
•Aggressively styled, free-flowing high-performance air cleaner
•Chrome-plated die-cast housing features a high-flow air filter element
supplied by Advanced Flow Engineering (aFe) for maximum performance,
includes crankcase breather support bracket and all necessary installation
hardware and brackets
•Will support engines making in excess of 100 horsepower
•Air cleaner extends approximately 6” straight out and
121/2” forward of the engine
•PART #1010-0345 is a Corsair assembly (CV bolt pattern) for use with
custom adapters, brackets, etc. for custom installation on models for
which a complete kit is not offered
NOTE: Installation of this air cleaner may decrease rider legroom.
PART #
DESCRIPTION
SUG. RETAIL
1010-0344
For 93-99 Evolution Big Twin w/ CV carb,
99-09 Twin Cam w/ CV carb or Delphi fuel
injection (except 08-09 FLHT, FLHR and FLTR)
$319.95
1010-0343
For 91-06 XL w/ CV carb
319.95
1010-0345
Corsair air cleaner assembly only
289.95
1011-1380
Repl. air filter element
59.95
1011-1381
Repl. pre-filter element
29.95
1010-0220
HI-FIVE AIR CLEANER KITS
•A high-performance line of inhaler
air cleaners from Küryakyn
•Five-spoke, tiered and slotted design
enhances looks and performance
•Die-cast construction
•Large slotted openings
enhance airflow
•Exclusive K&N air filter design passes
air through sides and outer end
•Backing plate design minimizes air disturbance
as it enters the carburetor or throttle body
•Snap-in rings cover carb fasteners; radius of
the inside edge of the cleaner is flow-bench
tested for optimal airflow
•Threaded ports on the backing plate provide
convenient locations to connect crankcase
breathers or float bowl vents if needed (plugs
and fittings included)
•Measures approximately 7” in diameter
1010-0338
and 3” thick
PART #
DESCRIPTION
CHROME
1010-0152 For 99-06 Twin Cam w/ CV carb or 01-09 Delphi
EFI (except 08-09 FLHT, FLHR, FLTR and FLHX)
1010-0153 For 93-99 Evolution Big Twin w/ CV carb
1010-0154 For 91-06 XL w/ CV carb
WRINKLE BLACK
1010-0338 For 93-99 Evolution Big Twin w/ CV carb
1010-0221
SUG. RETAIL
$219.95
219.95
219.95
239.95
1010-0217
PRO R HYPERCHARGER™
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
SKULL AIR CLEANER KITS
•Extremely rigid, high-strength composite construction
•Includes chrome outer cover, backing plate, high-flow air filter element
and all necessary brackets, crankcase breathers and other required
hardware included
•PART # 1010-0221 is an assembly (CV bolt pattern) that can be used
with adapters, brackets or mount kits to cover applications for which a
complete kit is not available
•Sold each
PART #
DESCRIPTION
SUG. RETAIL
1010-0220 For 99-09 Twin Cam w/ CV carb or Delphi EFI
(except 08-09 FLHT, FLHR and FLTR)
$239.95
1010-0219 For 93-99 Evolution Big Twin w/ CV carb
239.95
1010-0218 For 91-06 XL models w/ CV carb
239.95
1010-0221 Skull air cleaner assembly only
199.95
DS-288938
DS-288938
FOOTRESTS
& LICENSE
PLATE FRAMES
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
364
PRO SERIES HYPERCHARGER™
•Features a 50% larger air filter for massive airflow
•Internal shape has been modified to allow
increased airflow and velocity
•One-piece construction, ball-milled,
“speed lines” symmetrical butterflies
and new “Pro” embossed bearing cups
•Edges of Pro Series Hypercharger are radiused
for a more streamlined appearance
•An upgrade kit is available for new-style
(replaceable bearing cup) Hyperchargers and
includes a new “Pro” outer case half,
bearing cups, butterflies, large K&N air
filter and necessary hardware
FRAMES,
SUSPENSION
& FENDERS
TIRES,
TUBES &
WHEELS
DS-288939
•The best-flowing Hypercharger™
ever produced
•Careful redesign of all interior
shapes increases airflow
•Additional air scoop on outer cover
directs air onto the high-flow,
washable and reusable air filter
•Unrestricted air under high-load
riding situations from huge front
butterflies are vacuum operated
•Include all necessary mounting
hardware and crankcase breather kit
•PART # 1010-0217 is an assembly (CV
bolt pattern) that can be used with
adapters, brackets or mounting kits to cover applications that do not
have a specific kit
PART #
DESCRIPTION
SUG. RETAIL
1010-0215 For 99-06 Twin Cam w/ CV carb and 06-09 w/
Delphi EFI (except 08-09 FLHT, FLHR and FLTR)
$309.95
1010-0216 For 01-05 Twin Cam w/ Delphi EFI
309.95
1010-0214 For 93-99 Evolution Big Twin w/ CV carb
299.95
1010-0213 For 91-06 XL models w/ CV carb
299.95
1010-0217 Pro R cleaner assembly only
259.95
1011-1079 Repl. K&N air filter (ea.)
49.95
PART #
1010-0151
DS-288938
1010-0147
1010-0149
1010-0150
DS-288937
DS-288936
1010-0148
DS-288939
DESCRIPTION
W/ chrome butterflies for 01-05 Twin Cam w/ Delphi EFI
W/ chrome butterflies for 99-06 Twin Cam w/ CV carb, 06-09 Delphi EFI (except 08-09 FLHT, FLHR and FLTR)
W/ black butterflies for 99-06 Twin Cam w/ CV carb, 06-09 Delphi EFI (except 08-09 FLHT, FLHR and FLTR)
W/ chrome butterflies for 99-01 FLT (Dresser and Road King) w/ Magnetti-Marelli EFI
W/ chrome butterflies for 95-98 FLT (Dresser and Road King) w/ Magnetti-Marelli EFI
W/ chrome butterflies for 93-98 80” Evolution w/ CV carb
W/ chrome butterflies for 91-06 XL w/ CV carb
W/ chrome butterflies for custom applications (requires Küryakyn adapters, brackets and/or mounting kit)
Upgrade kit
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$289.95
279.95
279.95
299.95
299.95
269.95
269.95
239.95
129.95
SECTION
6
WINDSHIELDS
HYPERCHARGER™
AIR CLEANERS
1010-0156
LUGGAGE
SEATS &
SISSY BARS
SUG.
PART #
DESCRIPTION
RETAIL
HYPERCHARGER WITH SMOOTH TRAP DOOR
1010-0156 W/ chrome butterflies for 99-06 Twin Cam
w/ CV carb, 06-09 Delphi EFI (except 08-09 FLHTC,
FLHT, FLHR, FLTR and FLHX )
$239.95
1010-0157 W/ chrome butterflies for 01-05
Twin Cam w/ Delphi EFI
269.95
1010-0136 W/ chrome butterflies for 93-99
Big Twin w/ S&S E or G series carb
269.95
1010-0139 W/ chrome butterflies for 93-99
Big Twin w/ stock carb and Screamin’ Eagle breather
219.95
1010-0140 W/ chrome butterflies for 93-99
Big Twin w/ stock carb
229.95
1010-0144 W/ chrome butterflies for 92 Big Twin w/ stock carb
219.95
1010-0143 W/ chrome butterflies for 90-91
Big Twin w/ stock carb
219.95
1010-0142 W/ chrome butterflies for 84-89
Big Twin w/ stock or S&S B series carb
219.95
1010-02291 W/ chrome butterflies for 66-84 pre-Evo
Big Twin and XL w/ stock carb, S&S
B series or QwikSilver II carb
199.95
1010-0155 W/ chrome butterflies for 95-98 Evolution
Road King or Dresser w/ Magnetti-Marelli EFI
259.95
1010-0137 W/ chrome butterflies for 91-06 XL
w/ stock carb and H-D breather
219.95
1010-0141 W/ chrome butterflies for 91-06 XL w/ stock carb
229.95
1010-0135 W/ chrome butterflies for 88-90 XL w/ stock carb
219.95
1010-0134 W/ chrome butterflies for 86-87 XL
with stock or S&S B series carb
219.95
1010-0138 W/ metallic gray butterflies for 94-02 Buell w/ stock
carburetor (requires mount kit 1010-0230)
189.95
HYPERCHARGER WITH BLOOD GROOVE TRAP DOOR
DS-288845 W/ chrome butterflies for 99-01 FLTR, FLHT, FLHR
w/ Magnetti-Marelli EFI
279.95
DS-288844 W/ chrome butterflies for 99-06 Twin Cam w/ CV
carb, 06-09 Delphi EFI (except 08-09 FLHTC, FLHT, FLHR,
FLTR and FLHX)
249.95
STINGER TRAP DOOR
FOR HYPERCHARGER™
DESCRIPTION
Stinger trap door (ea.)
SUG. RETAIL
$49.95
HYPER STREAMLINER
•Gives your Hypercharger™
a whole new look
•Beautifully designed insert
installs in minutes without
any performance loss
•Fits all Hyperchargers
(except Pro Series
Hyperchargers)
PART #
1014-0001
DESCRIPTION
Hyper Streamliner
PART #
DESCRIPTION
HYPERCHARGER WITH BLOOD GROOVE TRAP DOOR (CONT)
1010-0162 W/ chrome butterflies for 01-05
Twin Cam w/ Delphi EFI
1010-0161 W/ black butterflies for 99-06 Twin Cam w/ CV carb,
06-09 Delphi EFI (except 08-09 FLHT, FLHTC, FLHR,
FLTR and FLHX)
DS-288821 W/ chrome butterflies for 93-99
Evolution Big Twin w/stock carb
DS-288822 W/ black butterflies for 93-99
Evolution Big Twin w/stock carb
DS-288940 W/ chrome butterflies for 93-99 80”
Evolution w/ S&S E & G carb
DS-288823 W/ chrome butterflies for 91-06 XL
models w/stock carb
1010-0163 W/ chrome butterflies for 91-06 XL w/ stock carb and
Screamin’ Eagle crankcase breather
DS-288824 W/ black butterflies for 91-06 XL models w/stock carb
HYPERCHARGER ACCESSORIES
DS-288827 Adapter to mount Hypercharger on S&S E and G
carburetors for 93-99 Big Twin and 91-06 XL models
(requires PART #DS-288826 adjustable enrichener and
1/2”-13 x 11/2” breather bolts)
DS-288826 Adjustable enrichener for S&S E and G carbs on 93-99
Big Twin and 91-06 XL models
1010-0146 Chrome blood groove trap door
1010-0327 Candy red trap door
1010-0328 Candy blue trap door
1010-0329 Chrome trap door
1010-0347 Black trap door
1010-0330 Candy red butterflies
1010-0331 Candy blue butterflies
1010-0332 Chrome butterflies
1010-0348 Black butterflies
DS-288825 Repl. K&N filter element for Hyperchargers listed above
1010-0230 Mount kit for 94-02 Buell w/ stock caburetor
1
SUG.
RETAIL
259.95
SUG. RETAIL
$36.95
259.95
289.95
259.95
229.95
259.95
39.95
19.95
23.95
17.95
17.95
19.95
17.95
13.95
13.95
13.95
13.95
42.95
49.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
•Slots on both sides and enlarged openings
at bottom of housing allow more air
to enter the filter
•Large, round breather element underneath
cover allows air to enter the end of the filter
•Teardrop center of cover provides
improved airflow and a clean look
•Internal crankcase vent system directs gasses
and oil droplets into the carburetor
induction module, eliminating a mess
on the outside of the engine
•The result is improved airflow for
better performance
•Carb adapter and replacement K&N air filter elements sold each
•Available with a chrome finish
All part numbers in BOLD MAGENTA are new for 2009.
FUEL/AIR
SYSTEMS
259.95
Requires drilling a hole in the Hypercharger back (and mounting bracket
where applicable) for float bowl vent.
PART #
DESCRIPTION
TWIN VELOCITY PLUS AIR CLEANERS
1010-0342
For 99-09 Twin Cam w/ stock CV carb or Delphi fuel
inejction (except 08-09 FLHTC, FLHR, FLTR, FLHX)
1010-0341
For 93-99 Evolution Big Twin w/ stock CV carburetor
1010-0340
For 90-92 Evolution Big Twin w/ stock carburetor
ACCESSORIES
1013-0023
Adapter for S&S carbs for 99-06 Twin Cam
DS-289240
Adapter for S&S carbs for 90-99 Evolution Big Twin
1013-0022
Adapter for Mikuni HSR 42/54/48 carburetor for 93-08
Evolution or Twin Cam
DS-288862
Repl. primary K&N filter element
DS-288863
Repl. secondary K&N filter element
EXHAUST
$279.95
TWIN VELOCITY™
PLUS AIR CLEANER KITS
•If you have a need for more
performance, look no further
•Stinger trap door maximizes
airflow into the carburetor
or throttle body through
a high-flow filter element
•Highly cost-effective
way to boost airflow to any
standard Hypercharger
•Easy four-bolt replacement
for standard trap door
•Chrome finish
PART #
1010-0145
TOURING
DS-288821
•These air cleaners look
great and work even better
•Available with a standard
(smooth) trap door or our
Blood Groove design
•Chrome-plated body and
trapdoor with either chrome
or black butterflies
•Include Küryakyn’s breather
where applicable
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
SUG. RETAIL
$219.95
219.95
219.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
49.95
49.95
HARDWARE,
CHEMICALS
& TOOLS
39.95
46.95
9.95
COVERS,
SECURITY
& GENERAL
365
SECTION
6
1022-0052
WINDSHIELDS
1022-0055
TOURING
LUGGAGE
1010-0475
SEATS &
SISSY BARS
1022-0055
EXHAUST
1010-0478
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
AIR INTAKES
•It's all about how much air a motor
can take in
•Here are systems that work better
and look better than any other systems
on the market
•An all-aluminum venturi in both designs helps shape the air for better flow
•Hand-formed chrome steel covers for a distinctive look that is a perfect match
for any Vance & Hines exhaust system
•Exhaust, fuel and now air is the complete the package
•Each includes a high-flow washable and reusable air filter
•Made in the U.S.A.
DUKE COVER
PART #
CHROME
1010-0475
1010-0477
1010-0476
BLACK
1010-0478
1010-0480
1010-0479
1010-0406
1010-0407
DRAK COVER
SUG.
RETAIL
DESCRIPTION
For 01-09 Twin Cam w/ Delphi EFI (except 08-09
FLHT, FLHR, FLHX, FLTR), 99-06 Twin Cam w/ CV carb
For 08-09 FLHT, FLHR, FLHX, FLTR
For 04-09 XL
For 01-09 Twin Cam w/ Delphi EFI (except 08-09
FLHT, FLHR, FLHX, FLTR), 99-06 Twin Cam w/ CV carb
For 08-09 FLHT, FLHR, FLHX, FLTR
For 04-09 XL
1010-0450
$259.95
259.95
259.95
279.95
279.95
279.95
PART #
CHROME
1022-0052
1022-0055
BLACK
1010-0406
1010-0407
SUG.
RETAIL
DESCRIPTION
For 01-09 Twin Cam w/ Delphi EFI
(except 08-09 FLHT, FLHR, FLHX, FLTR)
For 08-09 FLHT, FLHR, FLHX, FLTR
$229.95
229.95
For 01-09 Twin Cam w/ Delphi EFI
(except 08-09 FLHT, FLHR, FLHX, FLTR)
For 08-09 FLHT, FLHR, FLHX, FLTR
259.95
259.95
1010-0298
1010-0211
1010-0270
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
366
MO-FLOW™ BILLET AIR CLEANERS
•Made from T-6 billet aluminum
•Each air cleaner assembly contains a velocity plate and reusable pleated gauze performance filter that has been
engineered and flow tested to obtain maximum airflow and protection for your motor
•Hidden fasteners and an internal breather assembly for a clean look
•Available in polished chrome, wrinkle black or gloss black finish
•All mounting hardware included
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
GLOSS BLACK
CHROME (CONT)
1010-0450 For 08-09 FLHT, FLHR, FLHX, FLTR
$299.95 1010-0272 For 93-99 Evolution Big Twin w/ S&S E or G carb
$299.95
1010-04451 For 99-06 Twin Cam w/ CV or Mikuni carb, 01-09
1010-02121 For 91-06 XL motors w/ CV carb or Mikuni carb
299.95
Twin Cam w/ Delphi EFI (except 08-09 Dressers)
299.95 1010-0271 For 91-06 XL motors w/ S&S E or G carb
299.95
1010-0448 For 99-06 Twin Cam w/ S&S E or G carb
299.95 WRINKLE BLACK
299.95 1010-0350 For 08-09 FLHT, FLHR, FLHX, FLTR
1010-04441 For 93-99 Evolution Big Twin w/ CV or Mikuni carbs
299.95
1010-0447 For 93-99 Evolution Big Twin w/ S&S E or G carb
299.95 1010-03011 For 99-06 Twin Cam w/ CV or Mikuni carb, 01-09
1010-04461 For 91-06 XL motors w/ CV carb or Mikuni carb
299.95
Twin Cam w/ Delphi EFI (except 08-09 Dressers)
299.95
1010-0449 For 91-06 XL motors w/ S&S E or G carb
299.95 1010-0299 For 99-06 Twin Cam w/ S&S E or G carb
299.95
CHROME
299.95
1010-02981 For 93-99 Evolution Big Twin w/ CV or Mikuni carbs
1010-0349 For 08-09 FLHT, FLHR, FLHX, FLTR
299.95 1010-0303 For 93-99 Evolution Big Twin w/ S&S E or G carb
299.95
1
1
1010-0270 For 99-06 Twin Cam w/ CV or Mikuni carb, 01-09
1010-0300 For 91-06 XL motors w/ CV carb or Mikuni carb
299.95
Twin Cam w/ Delphi EFI (except 08-09 Dressers)
299.95 1010-0302 For 91-06 XL motors w/ S&S E or G carb
299.95
1010-0211 For 99-06 Twin Cam w/ S&S E or G carb
299.95 1 Requires adapter for Mikuni, PART #HS42/001-K, SUG. RETAIL $17.95.
299.95
1010-02101 For 93-99 Evolution Big Twin w/ CV or Mikuni carbs
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
6
1010-0316
1010-0421
WINDSHIELDS
1010-0317
VENTURI
AIR CLEANERS
TOURING
•Choice of Speed 5
five-spoke or Speed
seven-spoke exposed
filter design that
enhance air flow
•Backing plate
promotes smooth airflow into carburetor/throttle body
•Built-in internal crank case breathers
•Includes high-volume K&N air filter
•All mounting hardware included
•Made in the U.S.A.
7
LUGGAGE
1010-0420
SEATS &
SISSY BARS
PART #
DESCRIPTION
SUG. RETAIL
FOR 93-06 BIG TWIN MODELS W/ STOCK CV CARB, 01-09 SOFTAIL MODELS,
04-09 DYNA GLIDE MODELS, 02-07 FLT MODELS W/ DELPHI EFI
1010-0316
Speed 5, chrome
$419.95
1010-0317
Speed 5, Contrast Cut™
419.95
1010-0420
Speed 7, chrome
419.95
1010-0421
Speed 7, Contrast Cut™
419.95
08-09 FLT MODELS
1010-0373
Speed 5, Chrome
419.95
1010-0374
Speed 5, Contrast Cut™
419.95
PART #
DESCRIPTION
08-09 FLT MODELS (CONT)
1010-0422
Speed 7, chrome
1010-0423
Speed 7, Contrast Cut™
FOR 91-09 XL W/ CV CARB/DELPHI EFI
1010-0402
Speed 5, chrome
1010-0403
Speed 5, Contrast Cut™
1010-0424
Speed 7, chrome
1010-0425
Speed 7, Contrast Cut™
SUG. RETAIL
$419.95
419.95
419.95
419.95
419.95
419.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
1010-0411
1010-0410
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
1010-0408
ELECTRICAL
1010-0412
1010-0409
AIR CLEANER KITS
•CNC-machined from 6061 aluminum then polished to a mirror finish
•Direct bolt-on for S&S Super E and G motors
•Air venturi machined into air cleaner for top-breathing engines
•Include designer cover, WCC logo enrichner cover, mounting bracket
and UNI high-flow filter
•CNC machined 6061 aluminum adapters available for CV carburetor,
Delphi fuel injection or Mikuni 42mm or 45mm carburetors; sold separately
•Made in the U.S.A.
LIGHTING
1010-0413
NOTE: For top breathing engines, carb support bracket/breather kits must be purchased separately.
PART #
AIR CLEANER KITS
1010-0408
1010-0409
1010-0410
1010-0411
1010-0412
DESCRIPTION
SUG. RETAIL
CFL logo
Pay Up Sucker
Coffin
Ace of Spades
Maltese Cross
$349.95
349.95
349.95
349.95
349.95
PART #
ACCESSORIES
1010-0413
1010-0414
HANDLEBARS,
CONTROLS
& MIRRORS
1010-0414
DESCRIPTION
SUG. RETAIL
Adapter for 88 or later CV
carburetors or Delphi fuel injection
Adapter for Mikuni 42mm or
45mm carburetor
CABLES
$39.95
39.95
BRAKES
TANKS &
OIL FILTERS
1010-0196
1010-0198
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
1010-0199
1010-0197
•Features a "full perimeter flow" intake screen and a washable filter element
•Features unique internal crankcase venting through the mounting bolts
into the filter chamber (uses no external breathers)
•Available in choice of CNC-engraved designs
•Includes instructions; mounting hardware sold separately
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
AIR CLEANER ASSEMBLIES
1010-0196
Flame
$299.95
1010-0197
Hot Head
299.95
1010-0198
Joker
299.95
1010-0199
Smooth
299.95
1010-0200
Ball-milled
299.95
FOOTRESTS
& LICENSE
PLATE FRAMES
1010-0200
CHROME BILLET DIAMOND AIR CLEANER ASSEMBLIES
AND MOUNTING KITS
1010-0001
1021-0003
PART #
DESCRIPTION
MOUNTING KITS
1021-0003
For 01-09 Twin Cam w/ Delphi EFI
(except 08-09 Dressers)
1010-0001
For 02-06 Twin Cam w/ S&S E and G carbs
1013-0012
or 99-06 Twin Cam w/ CV carb
1013-0011
For 93-99 Evolution Big Twin w/ CV carb
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$39.95
49.95
39.95
39.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
367
SECTION
6
1010-0481
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
BIG AIR KIT (BAK)
•Substantially increased horsepower
and torque are provided by the
flow bench and dyno-tested design
•Features a beautifully chromed billet aluminum cover
•Innovative styling enhances and accentuates your “V” Twin engine
•The set back, thin-line design does not interfere with rider’s leg
•Maximizes overall performance and fuel efficiency and easily supports
engines producing over 120hp
•Includes breather kit, mounting hardware, micron-fabric rain coat for
wet weather riding and easy-to-follow installation instructions
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
PART #
1010-0481
HIGH PERFORMANCE 6”
DRAGTRON™ II AIR CLEANER
1010-0482
•Dynamometer-designed radius entry backing
plate maximizes air flow and horsepower
•2” washable filter is encased in a heavy
stainless steel mesh and is easily serviced
•Available in chrome finish
•Stainless steel hardware is included
•Replacement filters available; see page 380
DESCRIPTION
93-09 Big Twin w/ CV carb or Delphi EFI
(except 08-09 Dresser)
08-09 FLHT, FLHX, FLHR, FLTR models
SUG. RETAIL
$299.95
299.95
DS-288500
NOTE: Support brackets and breather kits are sold separately.
U.S. Design Patent #305,149; Taiwan Patent pending.
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
PART #
DS-289044
DESCRIPTION
For 90-09 Big Twin (except 08-09 Dressers),
88-08 XL (CV carbs/Delphi EFI)
SUG. RETAIL
$84.95
1010-0038
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
368
DS-288501
2110-5003
FINNED AIR CLEANERS
•Unique style allows the engine to show through
the teardrop silhouette
•Chrome-plated billet aluminum construction
•Features a K&N washable filter element for
performance and long life
•For popular carburetors; mounting brackets available separately
•Matching finned horn PART #2107-0009 is available separately
NOTE: Breather kit must be purchased separately.
PART #
DESCRIPTION
SUG. RETAIL
FINNED AIR CLEANERS
1010-0038 For 93-06 Big Twin and 91-06 XL models w/ CV carbs
$464.95
1010-0039 For 01-09 Big Twin models w/ Delphi fuel injection
(except 08-09 Dressers)
464.95
1010-0040 For 93-06 Big Twin and 91-06 XL w/ S&S Super E
and G carburetors
464.95
MOUNTING BRACKETS
1013-0001 For 91-06 XL models
47.95
1013-0002 For 93-09 Big Twin models (except 08-09 Dressers)
51.95
MALIAIR HIGH-PERFORMANCE
AIR CLEANERS
•Features high-volume 400cfm design,
internal velocity stack and K&N air filter
•Available in satin or chrome with a choice of insert
•Support bracket and breather kit required and must be
purchased separately
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 90-06 CARBURETED BIG TWIN, 01-09 DELPHI FUEL-INJECTED MODELS
(EXCEPT 08-09 DRESSERS), 88-06 XL AND ALL 1200CC BUELL MODELS
(EXCEPT FUEL-INJECTED MODELS)
DS-288500
Satin air cleaner w/ satin insert
$285.95
DS-288501
Satin air cleaner w/ black insert
285.95
2110-5003
Chrome air cleaner w/ black insert
299.95
2110-5004
Chrome air cleaner w/ chrome insert
299.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
6
WINDSHIELDS
HIGH-VELOCITY AIR CLEANER KITS
TOURING
•Constructed of A356 heat-treated aluminum with
polished, chrome or black-anodized finish
•Dyno-proven to produce more horsepower and torque
•Includes reusable and washable high-flow air filter with
rain sock, custom support bracket with internal breathing system and
breather bolts
•Replacement rain sock available separately
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 08-09 FLHT, FLHR, FLHX, FLTR
1010-0375
Polished
$457.95
1010-0389
Black
477.95
1010-0390
Chrome
620.95
FOR 99-06 TWIN CAM W/ CV CARB OR 01-09 DELPHI FUEL INJECTION
(EXCEPT 08-09 FLHT, FLHR, FLTR)
1010-0094
Polished
445.95
1010-0379
Black
465.95
1010-0380
Chrome
608.95
FOR 99-06 TWIN CAM-STYLE ENGINES W/ S&S CARB
1010-0096
Polished
445.95
1010-0383
Black
465.95
1010-0384
Chrome
608.95
FOR 99-06 TWIN CAM-STYLE ENGINES W/ MIKUNI CARB
1010-0098
Polished
457.95
1010-0387
Black
477.95
1010-0388
Chrome
620.95
LUGGAGE
PART #
DESCRIPTION
SUG. RETAIL
FOR 93-99 BIG TWIN EVOLUTION-STYLE ENGINES W/ S&S CARB
1010-0095
Polished
$445.95
1010-0381
Black
465.95
1010-0382
Chrome
608.95
FOR 93-99 BIG TWIN EVOLUTION-STYLE ENGINES W/ CV CARB
1010-0093
Polished
445.95
1010-0377
Black
465.95
1010-0378
Chrome
608.95
FOR 93-99 BIG TWIN EVOLUTION-STYLE ENGINES W/ MIKUNI CARB
1010-0097
Polished
457.95
1010-0385
Black
477.95
1010-0386
Chrome
620.95
REPLACEMENT COMPONENTS
1011-0496
Repl. air filter
69.95
1011-1008
Repl. rain sock
45.95
1010-0376
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
1010-0130
BRAKES
1010-0261
SPEEDY FLOW AIR CLEANERS
1011-0534
1011-0535
1011-0536
1011-0537
TWIN CAM RAM CHARGER
•Designed for all Delphi fuel-injected bikes
•Adds a cool drag look while also increasing
horsepower by 5+ and increasing torque by 8+ ft.-lbs.
•Machined from solid 6061 T-6 billet aluminum
•Tig-welded for superior strength
•Polished to a show-quality finish
•Pre-filters available separately
•Made in U.S.A.
PART #
DESCRIPTION
RAM CHARGER
1010-0130
For all 01-05 Delphi fuel-injected Twin Cams
RAM CHARGER PRE-FILTERS
1011-0534
Black
1011-0535
Blue
1011-0536
Red
1011-0537
Yellow
•Features one-piece billet aluminum
backing plate/carb support with internal breathing system
•Eliminates need for banjo fittings, hoses and breather filter
•Filter is 5/8” deeper than factory Screaming Eagle filter; better flow than
any stage I or II kits on the market
•Dyno-proven to add 8-12 horsepower over stock with proper
fuel adjustments
•Reuses the stock oval outer cover
•Setscrews keep the breather bolts from backing out over time
•Mikuni application requires adapter (sold separately)
•Available with polished or black-anodized finish
•Made in the U.S.A.
PART #
POLISHED
1010-0376
1010-0261
1010-0262
SUG. RETAIL
$479.95
43.95
43.95
43.95
43.95
DESCRIPTION
SUG.
RETAIL
For 08-09 FLHT, FLHR, FLHX, FLTR
$207.95
For 93-99 Big Twin Evolution with CV carb
207.95
For 99-09 Twin Cam-style engines with CV carb or Delphi
207.95
fuel injection (except 08-09 FLHT, FLHR, FLHX, FLTR)
BLACK
1010-0393
1010-0391
1010-0392
For 08-09 FLHT, FLHR, FLHX, FLTR
For 93-99 Big Twin Evolution with CV carb
For 99-09 Twin Cam-style engines with CV carb or Delphi
fuel injection (except 08-09 FLHT, FLHR, FLHX, FLTR)
OPTIONAL/REPLACEMENT COMPONENTS
HS42/001-K Mikuni air box adapter kit
1011-1338 Repl. air filter
All part numbers in BOLD MAGENTA are new for 2009.
227.95
227.95
227.95
17.95
55.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
369
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
1010-0187
ENGINE
TRANSMISSION
& DRIVELINE
1010-0187
GASKETS
& SEALS
ELECTRICAL
LIGHTING
DS-288884
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
DS-288885
“BILLET SUCKER” AIR CLEANER ASSEMBLIES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
370
1014-0030
•Available in Stage I and Stage II
•Both feature an oversize exposed filter design for tremendous airflow
•Breather passages exit at the mouth of the carb, creating a virtually closed-loop system
•Kits include a high-flow air filter, chrome outer cover, chrome backing plate/support bracket and all necessary hardware
PART #
DESCRIPTION
STAGE I KITS
1010-0355
Smooth, for 08-09 FLHT, FLHR, FLHX, FLTR models
1010-0357
Scalloped, for 08-09 FLHT, FLHR, FLHX, FLTR models
1010-0186
Smooth, for all 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (except 08-09 FLHT, FLHR, FLHX, FLTR)
1010-0187
Scalloped, for all 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (except 08-09 FLHT, FLHR, FLHX, FLTR)
STAGE II KITS
1010-0356
Smooth, for 08-09 FLHT, FLHR, FLHX, FLTR models
1010-0358
Scalloped, for 08-09 FLHT, FLHR, FLHX, FLTR models
1010-0359
Grooved, for 08-09 FLHT, FLHR, FLHX, FLTR models
1010-0188
Smooth, for all 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (except 08-09 FLHT, FLHR, FLHX, FLTR)
1010-0189
Scalloped, for all 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (except 08-09 FLHT, FLHR, FLHX, FLTR)
1010-0190
Grooved, for all 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (except 08-09 FLHT, FLHR, FLHX, FLTR)
DS-288885
Smooth, for all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models
DS-288884
Grooved, for all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models
1010-0066
Scalloped, for all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models
1010-0065
Scalloped, for 99-01 Twin Cam FLT fuel-injected models
1010-00621
Grooved, for 91-09 XL models
1010-00641
Scalloped, for 91-09 XL models
1010-04421
Deep cut, for 91-09 XL models (black)
REPLACEMENT/OPTIONAL COMPONENTS
1010-0067
Optional Stage II scalloped outer cover
1014-0030
Optional Stage I scalloped outer cover
1010-0361
Repl. Stage II air filter element for 08-09 FLT models
2110-9495
Repl. Stage II air filter element
1010-0360
Repl. Stage I air filter element for 08-09 FLT models
2110-9494
Repl. Stage I air filter element
1
Will fit 88-90 models, breather system is not applicable for these model years.
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$218.95
218.95
218.95
218.95
229.95
229.95
229.95
229.95
229.95
229.95
222.95
222.95
222.95
229.95
222.95
229.95
229.95
120.95
120.95
53.95
53.95
49.95
49.95
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
1010-0181
EXHAUST
DS-288882
“BIG SUCKER” PERFORMANCE
AIR FILTER KITS
•Features a one-piece aluminum backing
plate/carb support bracket
•Eliminates the need for
banjo fittings, hoses
and filter
•Breather passages exit at the
mouth of the carburetor, creating
a virtually closed-loop system
•Stage I kit includes a high-flow
filter and accepts 93-09 oval
or round OEM outer cover
•Stage II kit includes a 20% larger
high-flow filter and accepts
an 8” round Ness or 8” round OEM
outer cover
•All necessary hardware and instructions
are included with each kit
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
DS-288880
NOTE: Stage I kit for 08-09 Dynas and XL
models will not accept the OEM cover.
Must use a round 8” aftermarket cover.
1010-0180
PART #
DESCRIPTION
SUG. RETAIL
STAGE I KITS WITHOUT COVER
1010-0351 For 08-09 FLHT, FLHR, FLHX, FLTR models (natural)
$133.95
1010-0353 For 08-09 FLHT, FLHR, FLHX, FLTR models (chrome)
147.95
1010-0179 For 99-06 Twin Cam CV carb and 01-09 Twin Cam
Delphi EFI models (natural) (except 08-09 FLHT,
FLHR, FLHX, FLTR)
133.95
1010-0181 For 99-06 Twin Cam CV carb and 01-09 Twin Cam
Delphi EFI models (chrome) (except 08-09 FLHT,
FLHR, FLHX, FLTR)
153.95
DS-288880 For 93-99 Evolution Big Twin models
w/ CV carb, 99-05 Twin Cam carb and Delphi
EFI models (natural)
133.95
DS-288882 For 99-01 FLHTI/FLHRI (natural)
133.95
133.95
1010-00601 For 91-09 XL models (natural)
STAGE II KITS WITHOUT COVER
1010-0352 For 08-09 FLHT, FLHR, FLHX, FLTR models (natural)
143.95
1010-0354 For 08-09 FLHT, FLHR, FLHX, FLTR models (chrome)
157.95
1010-0180 For 99-06 Twin Cam CV carb and 01-09 Twin Cam
Delphi EFI models (natural) (except 08-09 FLHT,
FLHR, FLHX, FLTR)
143.95
1010-0185 For 99-06 Twin Cam CV carb and 01-09 Twin Cam
Delphi EFI models (chrome) (except 08-09 FLHT,
FLHR, FLHX, FLTR)
163.95
DS-288881 For 93-99 Evolution Big Twin models w/
CV carb, 99-05 Twin Cam carb and Delphi
EFI models (natural)
143.95
DS-288883 For 99-01 FLHTI/FLHRI (natural)
143.95
1
143.95
1010-0061 For 91-09 XL models (natural)
PART #
DESCRIPTION
SUG. RETAIL
STAGE II KITS WITH SMOOTH STEEL COVER
1010-0432 For 08-09 FLHT, FLHR, FLHX, FLTR models (chrome)
$171.95
1010-0434 For 08-09 FLHT, FLHR, FLHX, FLTR models (black)
171.95
1010-0431 For 99-06 Twin Cam CV carb and 01-09 Twin Cam
Delphi EFI models (chrome) (except 08-09 FLHT,
FLHR, FLHX, FLTR)
171.95
1010-0433 For 99-06 Twin Cam CV carb and 01-09 Twin Cam
Delphi EFI models (black) (except 08-09 FLHT,
FLHR, FLHX, FLTR)
171.95
1010-0430 For 93-99 Evolution Big Twin models
w/ CV carb, 99-05 Twin Cam carb and Delphi
EFI models (chrome)
171.95
1010-0428 For 99-01 FLHTI/FLHRI (chrome)
171.95
171.95
1010-04291 For 91-09 XL models (chrome)
REPLACEMENT/OPTIONAL COMPONENTS
1010-0360 Stage I air filter for 08-09 FLHT, FLHR, FLHX,
FLTR models
49.95
2110-9494 Stage I air filter (except DS-288882)
49.95
1010-0361 Stage II air filter for 08-09 FLHT, FLHR, FLHX,
FLTR models
53.95
2110-9495 Stage II air filter
53.95
2110-9496 Stage I air filter for DS-288882 only
51.95
1014-0030 Optional Stage I scalloped outer cover
120.95
1010-0067 Optional Stage II scalloped outer cover
120.95
1
Will fit 88-90 models also, breather system is not applicable for these
model years.
1010-0396
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
TIRES,
TUBES &
WHEELS
•Feature steel backing plate integrated into the filter
•Backing plate includes additional urethane that forms into a radius inlet
•No aluminum backing plate required
•Utilizes factory exposed breather hoses and hardware
•Accepts factory outer air cleaner cover only
DESCRIPTION
For 99-06 Twin Cam w/ CV carb, 01-09 Twin Cam w/ Delphi EFI
(except 08-09 FLHT, FLHR, FLHX, FLTR)
For 08-09 FLHT, FLHR, FLHX, FLTR
LIGHTING
FOOTRESTS
& LICENSE
PLATE FRAMES
CHEAP SUCKER AIR FILTER KITS
PART #
1010-0395
ELECTRICAL
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$88.95
92.95
All part numbers in BOLD MAGENTA are new for 2009.
1010-0396
COVERS,
SECURITY
& GENERAL
371
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
DS-289606
SEATS &
SISSY BARS
2110-1259
DS-289604
EXHAUST
FUEL/AIR
SYSTEMS
2110-1260
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
2110-1257
POWER PACC™ AIR CLEANERS
1010-0037
•High-performance air cleaner system provides dramatic out-of-the box performance gains of up to 15%
•Precision-machined, one-piece billet backing plate eliminates flimsy brackets
•Snap-in venturi creates 100% unobstructed air flow for increased horsepower and torque through the entire rpm range
•Includes specially designed washable extra-high-volume reusable air filter
•All kits include complete premium mounting hardware
•Accept most aftermarket or stock-style air cleaner covers
•Available with or without Doherty Machines’ patented PowerVents™
•Instructions included for simple installation
•Made in the U.S.A.
NOTE: Not for use with Magneti-Marelli fuel injection systems.
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
PART #
AIR CLEANER
DS-289605
DS-289604
AIR CLEANER
DS-289607
DS-289606
AIR CLEANER
2110-1258
2110-1259
2110-1260
DESCRIPTION
FOR USE WITH OEM COVER
For 99-06 Twin Cam
For 93-99 80” Big Twin
WITH POWERVENT FOR USE WITH OEM COVER
For 99-06 Twin Cam
For 93-99 80” Big Twin
FOR USE WITH S&S TEARDROP COVER
For 00-06 Twin Cam
For 93-99 80” Big Twin
For 84-92 80” Big Twin
SUG. RETAIL
$233.95
233.95
316.95
316.95
238.95
238.95
238.95
PART #
DESCRIPTION
SUG. RETAIL
AIR CLEANER WITH POWERVENT FOR USE WITH S&S TEARDROP COVER
2110-1257
For 99-06 Twin Cam
$325.95
2110-1256
For 93-99 80” Big Twin
325.95
AIR CLEANER WITH POWERVENT FOR USE WITH OEM
OR AFTERMARKET COVER
1010-0037
For 01-09 Delphi fuel-injected models
(except 08-09 Dresser, 08-09 Dyna, 07-09 XL)
299.95
REPLACEMENT COMPONENTS
DS-289615
Repl. air filter w/ breather washers and O-ring
63.95
CABLES
1010-0131
1010-0132
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
372
PRO-MOD BREATHER KIT WITH AIR CLEANER
1010-0311
•Designed to be modular by allowing a custom look,
and adds horsepower
•Can be used as a complete system or as just a Pro-Mod Breather
•Machined from solid 6061 T-6 billet aluminum with a unique internal
breather design (no hoses)
•Accepts stock Screamin’ Eagle air cleaner cover – Yost round air
cleaner included
•Includes all necessary hardware for easy installation
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
RAW FINISH
1010-0132 For 99-06 Twin Cams w/ CV carburetor or 01-09
w/ Delphi fuel injection (except 08-09 Dresser)
$196.95
1010-0131 For 93-99 Evolution Big Twins w/ CV carb
196.95
CHROME FINISH
1010-0310 For 99-06 Twin Cams w/ CV carburetor or 01-09
w/ Delphi fuel injection (except 08-09 Dresser)
308.95
1010-0311 For 93-99 Evolution Big Twins w/ CV carb
308.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
DS-289070
DS-289130
1010-0419
1010-0325
AIR CLEANERS
•Original S&S chrome
teardrop air cleaner assemblies
•Include an S&S cover,
backing plate and high-quality
filter element and hardware kit
•Increase horsepower with no other changes
•Available for most OEM carburetors
•Made in the U.S.A.
EXHAUST
FUEL/AIR
SYSTEMS
1010-0237
ENGINE
NOTE: Covers may need to be notched when used with custom
or 5-gallon or larger fuel tanks.
NOTE: Installation of an S&S air cleaner may require re-jetting.
1014-0040
1010-0235
PART #
DESCRIPTION
AIR CLEANERS FOR S&S CARBURETORS
DS-289137
For E & G series carbs on 99-06 Twin Cam models
DS-289211
For E & G series carbs on 92-99 Evolution Big Twin models
DS-289129
For E & G series carbs on 84-92 Big Twin and 86-90 XL models
DS-289130
For E & G series carbs on 48-84 Big Twin and 57-85 XL models
DS-289070
For L series carbs
AIR CLEANERS FOR STOCK H-D CARBURETORS/FUEL-INJECTION SYSTEMS
1010-0419
For 08-09 EFI Touring models
1010-0325
For CV carbs on 93-06 Big Twin, 01-09 Big Twin EFI models (except 08-09 touring)
1010-0326
For CV carbs on 91-06 XL
DS-289401
For Keihin carbs on 84-89 Big Twin and 86-87 XL models
DS-289070
For Tillotson, Bendix and Keihin carbs on 66-84 Shovel Big Twin and 66-85 XL models
DS-289400
For CV carbs on 94-02 Buell models
AIR CLEANERS FOR SINGLE-BORE EFI MODELS
1010-0237
For stock H-D heads or S&S heads for stock or 4” bore, teardrop
1010-0236
For stock H-D heads or S&S heads for stock or 4” bore, Desperado
1010-0235
For S&S heads for 41/8” bore, Desperado
REPLACEMENT PARTS
DS-289404
Repl. S&S air cleaner cover for E & G carb
DS-289403
Repl. S&S air cleaner cover for S&S CV air cleaner and Super B carbs
DS-289405
Repl. air cleaner cover screws (10-pk.)
1011-0324
Repl. crankcase breather hose for 93-06 Big Twin, 91-06 XL and 81-03 Buells
1011-0325
Breather screw seals (silicone-coated steel washer), .520” i.d. (10-pk.)
1011-0326
Breather screw seals (silicone-coated steel washer), .380” i.d. (10-pk.)
DS-289408
Repl. filter element for DS-289137, DS-289211, DS-289128, DS-289129, DS-289130, 1010-0325 and 1010-0326
DS-289409
Repl. filter element for DS-289070, DS-289400, DS-289401, DS-289402, DS-289410 and S&S Super B
1014-0040
Chrome Desperado-style air cover; repl. standard cover for all E & G carb kits
SUG. RETAIL
$205.95
205.95
205.95
205.95
205.95
246.95
215.95
215.95
218.95
205.95
218.95
205.95
205.95
205.95
128.95
128.95
.95
5.95
.95
.95
17.95
15.95
128.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
1022-0024
1022-0025
DASHES
& GAUGES
1022-0026
1013-0016
TUNED INDUCTION AIR CLEANERS AND BRACKETS
•Swept forward, 2-into-1 design rams additional air into the cylinder
•Natural supercharging effect increases mid-range torque
•Nearly twice the filter area of a teardrop air cleaner
•Air cleaners are available in several different finishes
•Chrome bracket kits feature a support bracket and breather system all in one
•Air cleaner and bracket kits must be purchased separately
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
TUNED INDUCTION AIR CLEANERS
1022-0024 Natural
$246.95
1022-0025 Black
267.95
1022-0026 Chrome
334.95
CHROME BRACKET KITS
1013-0014 For 93-06 Big Twin models w/ S&S E/G series carbs
421.95
1013-0015 For 93-06 Big Twin models w/ CV carb or
01-07 Big Twin models w/ Delphi EFI
385.95
1013-0014
1011-0898
PART #
DESCRIPTION
CHROME BRACKET KITS (CONT)
1013-0016 For S&S 124” motors with S&S E/G series carb
REPLACEMENT PARTS
1011-0897 Repl. red filter w/ clamp (ea.)
1011-0898 Repl. blue filter w/ clamp (ea.)
1011-1336 Moisture-repellant rain cover for S&S tuned
induction filters (pr.)
All part numbers in BOLD MAGENTA are new for 2009.
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
1011-1336
SUG. RETAIL
$421.95
48.95
48.95
37.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
373
SECTION
6
WINDSHIELDS
1010-0294
TOURING
LUGGAGE
SEATS &
SISSY BARS
1011-1388
1011-0520
EXHAUST
RK SERIES INTAKE ASSEMBLIES
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
•Complete intake assembly fits neatly behind the stock air cleaner cover
•Provide a significant increase in airflow, smoother delivery to engine,
while boosting performance and filtration
•Feature a K & N High-Flow air filter, pleated design for optimum
airflow, specially designed lip seal for perfect seal, powder-coated
billet aluminum backplate (except PART #1010-0417 which is cast
aluminum) that eliminates external breathers and a built-in, dyno-tuned
velocity stack
•Maintain factory appearance, utilizes the stock air cleaner outer cover
•Twin Cam version available in two heights: 15/8” tall (stock) or
21/4” tall (large capacity)
1010-0322
NOTE: C.A.R.B. approved for 99-06 models.
PART #
DESCRIPTION
SUG. RETAIL
FOR 99-06 TWIN CAM W/ CV CARB, 01-09 TWIN CAM W/ DELPHI EFI
(EXCEPT 08-09 FLSTSB, DYNA AND DRESSER MODELS)
$173.95
1011-0520 Stock capacity filter assembly; 15/8” tall
1011-1388 Replacement filter for PART #1011-0520 15/8” tall
60.95
1010-0294 Upgrade filter kit for PART #1011-0520 (includes
128.95
longer spacers); 21/4” tall
1010-0273 Large capacity filter assembly; 21/4” tall
216.95
PART #
DESCRIPTION
SUG.
FOR 99-06 TWIN CAM W/ CV CARB, 01-09 TWIN CAM W/ DELPHI EFI
(EXCEPT 08-09 FLSTSB, DYNA AND DRESSER MODELS) (CONT)
1010-0295 Repl. filter for PART #1010-0273; 21/4” tall
FOR 08-09 FLHT/FLHR/FLHX/FLTR MODELS
1010-0417 Stock capacity filter assembly; 15/8” tall
FOR 04-06 XL 883/1200 MODELS
1010-03221 Large capacity filter assembly; 23/8” tall
1
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
RK SERIES BILLET
AIR FILTER ASSEMBLIES
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
374
$66.95
248.95
340.95
Does not include cover.
RK3901
•Chrome-plated polished billet
aluminum cover
•Round or Teardrop, Flames,
Ball-Grooved or Mirror Finish
•Includes K&N Original High-Flow
Air Filter
•Provides a substantial increase
in horsepower
•Pleated design provides
optimum airflow
•Powder-coated billet aluminum
backing plate
•Spacers and hardware included
•Specially designed drycharger extends
service intervals and is pre-treated to
repel water; sold separately
RK3912
RK3911
RK-3902
PART #
DESCRIPTION
FOR 92-99 80” BIG TWIN WITH OEM CARB
RK3901
Smooth round filter assembly
RK3911
Grooved round filter assembly
RK3902
Smooth teardrop filter assembly
RK3912
Grooved teardrop filter assembly
RK-3922
Flame teardrop filter assembly
FOR 91-97 XL 1200 WITH OEM CARB
RK3903
Smooth round filter assembly
RK3913
Grooved round assembly
SUG. RETAIL
$240.95
227.95
227.95
240.95
240.95
240.95
227.95
•Designed to fit Harley-Davidson
motorcycles equipped with
various carburetors
•These are neither street legal nor
recommended by Harley-Davidson
•Increase horsepower with proper
carburetor calibration
•These air cleaners clamp directly to
1010-0314
the carburetor flange
PART #
DESCRIPTION
1010-0314 76-89 Keihin butterfly carbs; 5” dia. and polished
outer cover (except all S&S E & G carbs)
1011-1058 36-38mm Mikuni carbs; 5” dia. open round style
RK-3922
PART #
DESCRIPTION
FOR 91-97 XL 1200 WITH OEM CARB (CONT)
RK3904
Smooth teardrop filter assembly
RK3914
Grooved teardrop filter assembly
RK3924
Flame teardrop filter assembly
REPLACEMENT FILTERS/DRYCHARGERS
E-3333
Teardrop-style filter
E-3336
Round-style filter
RK-3901PK
Drycharger for round filter assembly
RK-3902PK
Drycharger for teardrop filter assembly
FOOTRESTS
CUSTOM AIR
& LICENSE
PLATE FRAMES CLEANER ASSEMBLIES
TIRES,
TUBES &
WHEELS
RETAIL
SUG. RETAIL
$227.95
240.95
240.95
59.95
58.95
24.95
24.95
1011-1059
1011-1060
1011-1058
SUG. RETAIL
$71.95
59.95
PART #
1011-1059
RC-0920
1011-1060
DESCRIPTION
SUG. RETAIL
$71.95
36-38mm Mikuni carbs; 6” dia. chrome bonnet style
40-45mm Mikuni carbs; 5” dia. open round style
61.95
40-45mm Mikuni carbs; 6” dia. chrome bonnet style
71.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
6
WINDSHIELDS
TOURING
1010-0398
1010-0397
LUGGAGE
TRIFLOW STAGE 2 AIR INTAKES
TRIFLOW STAGE
1 AIR INTAKES
•Virtually no restriction in airflow,
yet provides air-cleaner protection
•Billet aluminum construction
with black wrinkle powdercoated finish
•Show-chrome decorative inlay plate
•21/4” washable filter
•Includes all required mounting hardware
PART #
DESCRIPTION
SUG. RETAIL
1010-0397 For 99-09 Twin Cam
w/ CV carb/Delphi EFI
(except 08-09 Dressers)
$329.95
1010-0399 For 99-06 Twin Cam w/
Mikuni carb
381.95
•Virtually no restriction in airflow, yet provides
air-cleaner protection
•Billet aluminum construction with black wrinkle
powder-coated finish
•Internal velocity stack that has been flow bench
tested for increased air flow
•Wider filter (2.75”) than Wimmer’s Stage 1
model for extra airflow
•Show-chrome decorative inlay plate
•Washable filter
•Includes all required mounting hardware
PART #
DESCRIPTION
SUG. RETAIL
1010-0398 For 99-09 Twin Cam
w/ CV carb/Delphi EFI
(except 08-09 Dressers)
$361.95
1010-0400 For 99-09 Twin Cam w/
Mikuni carb
415.95
1010-0313
SEATS &
SISSY BARS
EXHAUST
AIR CLEANER ASSEMBLY
•Billet aluminum construction
•Includes high-flow filter element
•All necessary installation hardware included
PART #
DESCRIPTION
SUG. RETAIL
1010-0418 For 93-06 Big Twin w/ CV
carb, 01-09 Twin Cam w/
Delphi EFI (except 06-09
Dyna, 08-09 Dresser)
$249.95
1010-0018
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
1010-0312
1010-0394
LIGHTING
1010-0019
AIR CLEANER ASSEMBLIES WITH K&N FILTERS
•All parts are CNC-machined from billet aluminum stock
•Fully polished then chrome plated
•Available in old school Finned design or super-compact Round style
•Equipped with a high-performance genuine K&N air filter that can be accessed by removing a single screw
•Mounting brackets for air cleaners include hardware; required brackets must be purchased separately
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
AIR CLEANER ASSEMBLIES
MOUNTING BRACKETS
1010-0312
Old School Finned w/ 4” dia. filter
$299.95 1013-0018
For 93-99 Evolution Big Twin w/ Mikuni carb
1010-0313
4” round style w/ 4” dia. filter
229.95 1013-0019
For 99-06 Twin Cam w/ Mikuni carb
1010-0394
6” Retro-Finned round style w/ 6” dia. filter
299.95 1013-0020
For 93-99 Evolution Big Twin w/ S&S carb
1013-0021
For 99-06 Twin Cam w/ S&S carb
HANDLEBARS,
CONTROLS
& MIRRORS
SUG. RETAIL
$109.95
119.95
169.95
179.95
DS-288999
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
1010-0192
“BOB” RETRO-STYLE AIR CLEANER
STAMPED STEEL
DRAGTRON™-STYLE
AIR CLEANER
•Retro-style chrome-plated air cleaner measures
51/2” in diameter
•Has a re-useable foam filter element
•All necessary mounting hardware included
•Replacement filter element available separately
•Stamped steel version of our
popular die-cast Dragtron
air cleaner
•Fits Bendix, Keihin and
Tillotson carburetors
PART #
DS-288999
DS-289043
DESCRIPTION
Air cleaner
Repl. foam
element
NOTE: Requires appropriate carb support bracket.
SUG.
RETAIL
$28.95
4.95
SUG.
PART #
DESCRIPTION
RETAIL
1010-0191 For CV and Delphi fuel-injected
applications (except 08-09 Dressers) $64.95
1010-0192 For S&S E and
G series carburetors
64.95
1011-0881 Repl. air filter element
14.95
7” ROUND
AIR CLEANERS
•Chrome air cleaners fit
Harley models equipped
with Bendix or Keihin carburetors
•PART# DS-288903 will require a support brace or a
brace/breather kit for models listed (sold separately)
•Air filter included
SUG.
PART #
DESCRIPTION
RETAIL
DS-288903 For 90-06 Big Twin and 88-06 XL
models w/ OEM CV carb, 01-09
Twin Cam w/ Delphi EFI (except
08-09 Dressers)
$49.95
DS-288998 For Bendix and Keihin (not CV) carbs 39.95
All part numbers in BOLD MAGENTA are new for 2009.
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
375
SECTION
6
AIR CLEANER ADAPTER
WINDSHIELDS
TOURING
LUGGAGE
•CNC-machined with a polished aluminum finish
•Enables you to mount a CV or S&S E and G-style air cleaner
to a Mikuni HSR 42/45/48mm carb
•Eliminates the stock O-ring mount and provides a secure fit
•Comes with mounting hardware, gasket and breather washers
•Made in the U.S.A.
PART #
DESCRIPTION
7805-0032
Air cleaner adapter
SUG. RETAIL
$55.95
1015-0100
7806-1918
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
2110-1902
1015-0102
CHROME SHOW-OFF COVERS
•Simple and easy way to dress up your Forcewinder XR or Forcewinder XR-2 air cleaner
•Available in four designs: Skull & Crossbones, Skull, Hot Rod and Tribal
•Includes cover, two-sided tape and mounting screws
•For use with K&N or Force filter elements only
•Made in the U.S.A.
NOTE: K&N air filters say K&N on the filter; Force filters say Force on the filter.
PART #
DESCRIPTION
SUG. RETAIL PART #
FOR K&N FILTER
FOR FORCE FILTER
1015-0100
Skull & Crossbones
$163.95 7806-1918
1015-0102
Skull
163.95 2110-1903
7806-1917
Hot Rod
163.95
2110-1902
Tribal
163.95
DESCRIPTION
SUG. RETAIL
Hot Rod
Tribal
$163.95
163.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FLAME
AIR FILTER COVER
FORCE AIR CLEANER COVER
•Chrome-plated billet
aluminum construction
•Fits Wimmer Super Filter
intake systems
•Made in the U.S.A.
PART #
1014-0005
DESCRIPTION
Flame air filter cover
•Steel accent piece adds even more style
to your Force air cleaner cover
•Every cover is made by hand and then
chrome plated
SUG.
RETAIL
$58.95
PART #
1010-0086
FRAMES,
SUSPENSION
& FENDERS
DESCRIPTION
Chrome Force air
cleaner cover
SUG. RETAIL
$149.95
8” AIR CLEANER COVER
•Die-cast aluminum with
a chrome finish
•For Ness stage I and II “Big
Sucker” kits or Big Twin Screamin’
Eagle® backing plates
PART #
DS-288949
DESCRIPTION
Smooth
SUG. RETAIL
$82.95
8634
FOOTRESTS
& LICENSE
PLATE FRAMES
CUSTOM
AIR CLEANER COVERS
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
AIR CLEANER FAIRING
COVERS,
SECURITY
& GENERAL
PART #
1010-0088
376
•Stylish covers fit over your
favorite air cleaner
•Composite fiberglass
construction yields both
strength and light weight
•Available in Street Sweeper design
•Available for S&S and OEM air cleaners
•Bolts directly to Screamin’ Eagle air filters
•Chrome finish
DESCRIPTION
Chrome air
cleaner cover
SUG. RETAIL
$299.95
PART # DESCRIPTION
SUG. RETAIL
8624
For all S&S air cleaners
$91.95
For round OEM CV air cleaner
91.95
8634
AIR CLEANER
COVER PLUGS
•Genuine James Gaskets®
cover plugs replace those found in OEM
air cleaners on 86-91 Big Twin models;
repl. OEM #738
•Sold in 10-pk.
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
DS-173431 Air cleaner cover plugs
$.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
6
1010-0165
1010-0164
SKULL AIR CLEANER COVER
WINDSHIELDS
•Replacement cover for the standard
teardrop cover on S&S E or G series air cleaners
•Skull motif flows cleanly down the side
of the cover for a unique look
•High-strength composite material construction
with a chrome-plated finish
•Installs quickly and easily with supplied hardware
PART #
DESCRIPTION
1010-0164
Satin black
1010-0165
Chrome
TOURING
SUG. RETAIL
$99.95
139.95
LUGGAGE
SEATS &
SISSY BARS
1015-0098
1015-0097
EXHAUST
FUEL/AIR
SYSTEMS
SMOOTH STYLE CARBURETOR COVERS
FIVE-BOLT DOMED
AIR CLEANER INSERT
•Available in a teardrop design
•Comes without element
•Features a chrome finish
PART #
1015-0097
1015-0098
1015-0099
DESCRIPTION
For Linkert carburetors
For all side valve Linkert carburetors
For S&S carburetors on 84-91 Big Twin
SUG. RETAIL
$42.95
52.95
74.95
•Die-cast insert with a chrome finish
•Matches the five-bolt style of OEM derby cover
PART #
DESCRIPTION
DS-288929
For 99-09 OEM Twin Cam air cleaners
(except 08-09 Dyna)
ENGINE
SUG. RETAIL
$37.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
1015-0110
DS-288841
1014-0006
DS-288842
HANDLEBARS,
CONTROLS
& MIRRORS
CHROME BILLET
AIR CLEANER INSERTS
CABLES
•Available in a variety of designs
•Sold each
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 99-09 TWIN CAM ROUND AIR CLEANER (EXCEPT 08-09 DYNA)
1014-0007
Joker
$69.95
1015-0110
Finned
69.95
DS-288841
Flame
69.95
DS-288842
Smooth
69.95
1014-0006
Hot Head
69.95
1010-0007
Ball-milled
69.95
FOR 84-99 EVOLUTION ROUND AIR CLEANER
DS-288831
Joker
81.95
DS-288829
Flame
81.95
1014-0037
Hot Head
79.95
DS-288832
Smooth
81.95
FOR S&S E AND G SERIES TEARDROP AIR CLEANER
DS-288835
Joker
82.95
DS-288833
Flame
82.95
DS-288836
Smooth
82.95
DS-288753
AIR
CLEANER INSERTS
BRAKES
DS-288831
1010-0007
DS-288836
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
DS-288835
1014-0013
1014-0012
•Chrome or black-anodized
6061 T-6 billet aluminum
•Fit all S&S E and G series teardrop air cleaners
•Mounting hardware included
PART #
CHROME
1014-0010
DS-288753
BLACK ANODIZED
1014-0013
1014-0012
DESCRIPTION
SUG. RETAIL
Maltese Cross
Smooth
$92.95
88.95
Maltese Cross
Tribal
92.95
92.95
TANKS &
OIL FILTERS
All part numbers in BOLD MAGENTA are new for 2009.
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
377
SECTION
6
WINDSHIELDS
TOURING
DS-288816
DS-288820
LUGGAGE
SEATS &
SISSY BARS
AIR CLEANER INSERTS
1010-0416
1010-0415
•Bolt-on inserts give a customized
look to aftermarket or OEM
air cleaner
•Constructed of billet aluminum
and available in a chrome finish
•Made in the U.S.A.
AIR CLEANER INSERTS
EXHAUST
FUEL/AIR
SYSTEMS
•CNC-machined billet aluminum construction
•Finned style with a chrome or gloss black finish
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 99-09 OEM TWIN CAM AIR CLEANER (EXCEPT 08-09 DYNA)
1010-0415
Black
$120.95
1010-0416
Chrome
120.95
ENGINE
DS-289069C
PART #
DESCRIPTION
FOR 84-99 80” BIG TWIN ROUND AIR CLEANER
DS-288816
Millennium smooth
FOR 99-09 TWIN CAM MODELS WITH OEM AIR CLEANER
(EXCEPT 08-09 DYNA)
DS-288819
Millennium smooth
DS-288820
Millennium ball-milled
FOR S&S E AND G AIR CLEANER
DS-289069C
Ball-milled
SUG. RETAIL
$88.95
77.95
77.95
99.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
DIAMOND
AIR CLEANER
COVER INSERT
•High-quality
chrome-plated
billet aluminum
•Matching engine
covers, brake caliper
insert, footpegs
and grips
available separately
•Made in the U.S.A.
PART #
DS-288901
AIR CLEANER
INSERT
DESCRIPTION
Insert for 8” air cleaner cover; for all 84-99
OEM round air cleaners
SUG. RETAIL
$80.95
•Insert is crafted
with eye-catching
detail in mind
•Available in a chrome
hog design
PART #
1014-0023
DESCRIPTION
For Evolution
SUG. RETAIL
$145.95
CABLES
LIVE TO RIDE AIR CLEANER INSERT
BRAKES
•Die-cast construction with chrome finish
•Fits OEM air cleaner
PART #
DESCRIPTION
1014-0039
For 04-09 XL
TANKS &
OIL FILTERS
SUG. RETAIL
$39.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
378
1022-0001
1022-0002
1022-0003
INJECTI-COVERS™
•Constructed from 16-gauge cold rolled steel, polished then chrome-plated
•Great looking covers hide the OEM throttle body
•Offer a true custom look
NOTE: Covers may not fit with all styles of breather kits and support brackets. Check clearance before mounting.
PART #
1022-0001
1022-0002
1022-0003
DESCRIPTION
For 95-01 FLT EFI models w/ OEM or Screamin’ Eagle air filter
For 01-05 FXST/FLST models, 04-05 Dyna and 02-05 FLT w/ Screamin’ Eagle air filter
For 01-05 FXST/FLST models, 04-05 Dyna and 02-05 FLT w/ Forcewinder or D&M-style air intake system
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$49.95
59.95
149.95
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
1011-0313
1011-1203
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
1011-1204
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
1011-0312
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
1011-0320
CABLES
1011-0318
1011-0319
BRAKES
REUSABLE AIR FILTERS
•Durable epoxy-coated wire mesh designed to maximize airflow and provide peak filtration
•100% reusable and washable
•High-flow four-layer surgical-grade cotton filtration
•Urethane body that won’t crack or curl like rubber
•Precision hand-poured design
•Made in the U.S.A.
YEAR
MODEL
FOR BIG TWIN
99-09
Twin Cam (exc. 99-01 EFI, 08-09 Dresser, 08-09 Dyna Glide, 08-09 FLSTSB)
08-09
FLHT/FLHR/FLTR/FLHX
99-01
88” Twin Cam (w/ Magneti-Marelli EFI)
95-98
80” Evolution (w/ Magneti-Marelli EFI)
90-99
80” Evolution (carbureted)
86-89
80” Evolution (carbureted)
02-09
V-Rod
FOR XL/BUELL
04-09
XL Evolution
88-03
XL Evolution
96-02
Buell (exc. 96 S2/S2T, 00-02 Blast)
FOR AFTERMARKET AIR CLEANERS
S&S “D” teardrop air filter
S&S 6” x 23/16” air filter
S&S Super E and G series carb air filter
Screamin’ Eagle air filter 08-09 FLHTCUSE/FLHRSE
Screamin’ Eagle air filter Evolution Big Twin
Screamin’ Eagle air filter Twin Cam (except 08-09 Dresser, 08-09 Dyna)
Screamin’ Eagle air filter 04-09 XL
Arlen Ness billet Sucker air filter Twin Cam (except 08-09 Dresser)
Arlen Ness Stage 1 Big Sucker/Billet Sucker air filter for CV carb
or Delphi EFI (except 08-09 Dresser)
TANKS &
OIL FILTERS
DRAG SPECIALTIES # K&N REF. #
OEM #
1011-0320
1011-1203
1011-0322
1011-0319
1011-0318
1011-0321
1011-0784
HD1499
HD8899
HD-1395
HD-1390
HD-2086X
HD-1102
29461-99
29633-08
29462-99
29291-95
29259-91A, 29330-96
29259-86
29437-01
1011-1067
1011-0317
1011-0312
HD-8834
HD-1388
BU-1297
29331-04
29036-88/A/B, 29331-96
29239-96Y, P0213.9
67.95
65.95
54.95
1011-0313
1011-0314
1011-0315
1011-1204
1011-0316
1011-0528
1011-0783
1011-0528
E-3224
E-3225
E-3226
HD-0600
HD-0800
HD-0800
29244-08
29055-89
29442-99A
29044-04
29442-99A
31.95
31.95
31.95
52.95
45.95
47.95
64.95
47.95
1011-0528
HD-0800
29442-99A
47.95
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$74.95
69.95
77.95
71.95
59.95
45.95
67.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
379
SECTION
6
1011-0782
FILTER UPGRADE KITS
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
•Easy-to-install filter upgrade for Screamin’ Eagle air cleaners
•PART #1011-1411 includes a 3” deep washable reusable filter element with 60% more surface area than
the Screamin’ Eagle kit filter
•PART #1011-0782 includes a specially designed, washable pleated fabric filter that is 5/8” deeper than the factory performance
filter it is designed to replace – more surface area provides more airflow is achieved (9+%) and more power is the result
•Required mounting hardware supplied with both kits
PART #
DESCRIPTION
1011-1411
For 08-09 FLHT, FLHR, FLHX and FLTR models with Screamin’ Eagle air cleaner kit OEM #29260-08
1011-0782
For 99-09 Twin Cam w/ Screamin’ Eagle air cleaner kit OEM #29440-99C (except 08-09 FLHT, FLHR, FLHX, FLTR)
SUG. RETAIL
$69.95
64.95
HIGH-FLOW AIR FILTER AND ADAPTER KIT
•High-flow filter designed especially for Super E and G carburetors
•Filter is 1” taller than standard filter and features a low-restriction,
pre-oiled filter element
•Allows for a 37% increase in airflow
•Filter and adapters extend the teardrop housing out 1” for better exposure
and a high-performance street racer look
•Kit installs in minutes; no permanent modifications required
NOTE: Not for use with S&S Super B or Super D carburetors, or Super E and G Kits for Buells.
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
1011-0323 For S&S Super E and G carbs
$49.95 1011-1337 Repl. element
REPLACEMENT
FILTER ELEMENT
•Replacement 21/2”
or 3” filter element
for HSR42/45/48 carburetor
SUG. RETAIL
20.95
SUG.
PART #
DESCRIPTION
RETAIL
HS42012-250 21/2” filter element $74.95
HS42/012-3003” filter element
74.95
AIR FILTER APPLICATIONS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
380
YEAR
MODEL
FOR BIG TWIN AND V-ROD
08-09
FLHT/FLHR/FLHX/FLTR
TC Dyna
08-09
02-09
V-Rod
99-09
Twin Cam (carb), 01-08 Softail EFI, 02-07 Dresser EFI and 04-07 EFI Dyna Glide
99-01
88” Twin Cam Fuel-Injected Dressers
95-98
80” Evolution Fuel-Injected
95-99
80” Evolution International
93-00
80” Evolution (except Fuel Injected)
89-92
80” Evolution
86-89
80” Evolution
84-85
80” Evolution (except FLT, FLHT)
83-85
FLT and FLHT
82-83
FXR
80-82
FLT
L78-84
FX, FL and FLH
77-E78
FX and FL (31/2” W)
L75-76
FX, FL and FLH
67-E75
FX, FL and FLH
41-66
74”, 45”
FOR XL
04-09 XL
XL Evolution
88-03 XL
XL Evolution
86-87 XL
XL Evolution
83-85 XL
1000
83-85 XL
XR 1000 (2 req’d)
L78-82 XL
1000
L73-E75 XL
1000 (3” W)
L75-E78 XL
1000
66-E73 XL
900, 1000
FOR BUELL
03-08
XB9/XB12/XB12S/SCG 04-08/XV12SS/STT 08/XB12R 04-08
00-08
Blast
96-02
S1, S2, S3, M2 (except 94-95 S1, 94-98 S2/S2T, 94-96 S3/S3T)
FOR AFTERMARKET AIR CLEANERS
Edelbrock repl. air filter
Edelbrock dual carb air filter
Evo reverse tapered: 7” dia. (top) x 61/4” dia. (base) x 23/4” (tall)
Evo reverse tapered: 7” dia. (top) x 61/4” dia. (base) x 31/4” (tall)
Early Evolution model Screamin’ Eagle air filter (w/ lid); 7” dia. (base) x 7” dia. (top)
Late Evolution model Screamin’ Eagle air filter (no lid)
Screaming Eagle filter for 08-09 Dyna
Screaming Eagle filter for 08-09 FLT, FLHT, FLHR, FLHX, FLTR
Twin Cam Screamin’ Eagle tapered air filter (except 08-09 Dresser/Dyna) (no lid);
51/2” dia. (top) x 61/4” dia. (base)
Custom Evolution reverse tapered: 7” dia. (top) x 6” dia. (base) x 31/4” (tall)
Screamin’ Eagle for 04-09 XL
S&S dual-throat carb air filter
S&S “D” teardrop air filter; 21/16”
S&S Super E and G series carb air filter; 21/2”
S&S old style teardrop-shaped housing; 6” x 23/16” air filter
6” custom air filter
Dragtron™ air filter
Dragtron™ II air filter
Drag 7” round air filter (DS-288998)
Indian filter 6” OD x 45/8” ID x 23/4” H fits stock S&S teardrop back and
Indian teardrop cover (Indian cover not included)
Mikuni 36-38mm dirt track air filter “D” Oval: 7” length; 10 ° angle; 21/8” flange
1
K&N #
UNI #
OEM #
1011-1289
1011-1435
1011-0332
HD-1499
HD-8899
HD-1395
HD-1396
HD-1390
HD-1390
HD-2086X
HD-2084
HD-2078
HD-2078
HD-2078
HD-2076
HD-2075
HD-20
E-2470
1011-1345
DS-289499
DS-289511
DS-289507
DS-289506
DS-289508
DS-289503
DS-289503
DS-289503
DS-289501
DS-289500
DS-289502
29633-08
29191-08
29437-01
29461-99
29462-99
29291-95
29325-95A
29330-96
29259-89/91A
29259-86
29259-83A
29288-83
29255-78
29255-78
29255-78
29086-75
29086-73
29036-72
29036-41
1011-0532
HD-1388
HD-2085X
HD-2076
RU-1371/RU-1371
HD-2078
HD-2075
HD-2076
HD-20
DS-289510
DS-289505
DS-289500
DS-289503
DS-289501
DS-289500
29331-04
29036-88A/88B/29331-96
29036-86
29036-72
29255-78
29086-73
29086-75
29036-72
1011-0328
BU-5000
BU-1297
1011-0658
NU-3428
P0213.0248
P0213.T
-
E-3250
E-3325
1011-1061
1011-1062
HD-0600
1011-1409
1011-1410
1011-0471
1011-0472
-
29055-89
-
1011-0557
1011-0533
1011-1068
E-3224
E3226
E-3225
DS-289057
-
DS-289513
DS-289514
DS-289504
DS-289498
DS-289509
1011-1159
DS-289504
29442-990A/B/C/D
29044-04B
-
1011-1278
1011-1121
-
-
RU-1371 is equipped for venting, while RU-137 is not.
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
6
1011-0557
WINDSHIELDS
1011-1061
1011-0533
TOURING
1011-0328
1011-0332
LUGGAGE
1011-0532
1011-1435
SEATS &
SISSY BARS
1011-1409
1011-1410
1011-1278
EXHAUST
1011-1289
1011-1121
E3226
HD-1499
HD-2086X
ENGINE
HD-1390
HD-1388
HD-8899
HD-1395
HIGH-FLOW REPLACEMENT AIR FILTERS
TRANSMISSION
& DRIVELINE
•Designed to increase horsepower and torque
•Accordion design provides increased surface area and optimum filtration
•Application-specific sealing bead ensures an airtight fit
•Original K&N High-Flow Technology
•For cleaners and air filter care products see HARDWARE, CHEMICALS & TOOLS section
•Made in the U.S.A.
PART #
1011-0328
1011-0332
1011-0532
1011-0533
1011-0557
1011-1061
1011-1062
1011-1068
1011-1121
1011-1278
FUEL/AIR
SYSTEMS
SUG. RETAIL
$61.95
68.95
70.95
64.95
55.95
62.95
63.95
54.95
51.95
59.95
PART #
1011-1289
1011-1409
1011-1410
1011-1435
BU-1297
BU-5000
DS-289057
E-2470
E-3224
E-3225
SUG. RETAIL
$79.95
69.95
69.95
79.95
57.95
65.95
40.95
39.95
41.95
41.95
PART #
E3226
E-3250
E-3325
HD-0600
HD-1388
HD-1390
HD-1395
HD-1396
HD-1499
HD-20
HD-20
SUG. RETAIL
$43.95
43.95
36.95
53.95
73.95
67.95
75.95
69.95
81.95
48.95
PART #
HD-2075
HD-2076
HD-2078
HD-2084
HD-2085X
HD-2086X
HD-8899
RU-137
RU-1371
SUG. RETAIL
$50.95
51.95
53.95
49.95
48.95
50.95
85.95
46.95
46.95
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
1011-0472
1011-0658
1011-0471
1011-1159
BRAKES
1011-1345
DS-289498
TANKS &
OIL FILTERS
DS-289499
DS-289502
DS-289500
DS-289501
DASHES
& GAUGES
DS-289503
DS-289504
FRAMES,
SUSPENSION
& FENDERS
DS-289505
AIR FILTER ELEMENTS
DS-289507
DS-289506
DS-289508
NU-3428
DS-289509
•Top-quality replacement air filter elements from Uni, the OEM supplier to Harley-Davidson
•Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing superior filtration
•Uni elements are available for a variety of Harley applications
•For cleaners and air filter care products see HARDWARE, CHEMICALS & TOOLS section
•Sold individually
•Made in the U.S.A.
PART #
1011-0471
1011-0472
1011-0658
1011-1159
1011-1345
DS-289498
SUG. RETAIL
$46.95
35.95
33.95
22.95
37.95
22.95
PART #
DS-289499
DS-289500
DS-289501
DS-289502
DS-289503
DS-289504
SUG. RETAIL
$26.95
18.95
18.95
17.95
18.95
17.95
PART #
DS-289505
DS-289506
DS-289507
DS-289508
DS-289509
DS-289510
SUG. RETAIL
$18.95
18.95
18.95
18.95
17.95
24.95
All part numbers in BOLD MAGENTA are new for 2009.
PART #
DS-289511
DS-289513
DS-289514
NU-3428
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
SUG. RETAIL
$24.95
18.95
17.95
30.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
381
SECTION
6
WINDSHIELDS
TOURING
1010-0055
LUGGAGE
SEATS &
SISSY BARS
1010-0054
1010-0203
EXHAUST
1010-0209
FUEL/AIR
SYSTEMS
90° SUPER-SUCKER INTAKE
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
•CNC-machined with a chrome finish
•Features an integrated support bracket and breather system
1010-0204
•Patented washable breather filter included
•Stack system measures 41/2" L with a 4" diameter
•Mikuni adapter converts Wimmer Super-Sucker intakes for 99-07 88" Twin Cam with CV carb/Delphi EFI to fit 99-06 88" Twin Cam
with HSR Mikuni carbs
•Made in the U.S.A.
PART #
1010-0054
1010-0055
1010-0203
DESCRIPTION
SUG. RETAIL
For HSR Mikuni, 92-99 80" Big Twin
$598.95
For S&S E and G series, 92-99 80" Big Twin, S&S 96",
107" and 113" motors
598.95
For S&S E and G series, S&S 111"/117"/124" motors
598.95
PART #
1010-0056
1010-0204
1010-0209
DESCRIPTION
For 99-07 CV/ Delphi EFI, Twin Cam
Replacement mesh screen
Mikuni adapter
SUG. RETAIL
$598.95
25.95
73.95
ELECTRICAL
1010-0050
1010-0048
1010-0204
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
1010-0209
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
SUPER-SUCKER SHORTY INTAKE
•CNC-machined with a chrome finish
•Features an integrated support and breather system with washable filters
•Tapered stack measures 31/4" L
•Mikuni adapter converts Wimmer Super-Sucker shorty intakes for 99-07 88" Twin Cam with CV carb/
Delphi EFI to fit 99-06 88" Twin Cam with HSR Mikuni carbs
•Made in the U.S.A.
PART #
1010-0048
1010-0049
1010-0202
DESCRIPTION
SUG. RETAIL
For HSR Mikuni, 92-99 80" Big Twin
$456.95
For S&S E and G series, 92-99 80" Big Twin, S&S 96",
107" and 13" motors
456.95
For S&S E and G series, S&S 111"/117"/124" motors
456.95
PART #
1010-0050
1010-0204
1010-0209
DESCRIPTION
For 99-07 CV/ Delphi EFI, Twin Cam
Replacement mesh screen
Mikuni adapter
FOOTRESTS
& LICENSE
PLATE FRAMES
SUPER-SUCKER
DUST COVER
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
382
SUG. RETAIL
$456.95
25.95
73.95
1010-0208
1012-0032
1012-0033
RAIN SOCKS
•Water-repellent rain sock helps keep water out of Wimmer Custom Cycle velocity stacks, intakes
and filters
PART #
1012-0032
1012-0033
1010-0208
DESCRIPTION
For Super-Sucker long and shorty velocity stacks
For HPF3-2 Super Filters
For Spike air intakes
SUG. RETAIL
$15.95
25.95
25.95
•Keep dust and debris
out of the air intake
when storing
or parking a bike
NOTE: Cover is not
breathable and should not
be used on velocity stack when riding.
PART #
1012-0031
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
For all Super-Sucker
long and shorty
velocity stacks
SUG. RETAIL
$15.95
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
DS-288846
SEATS &
SISSY BARS
DS-288279
EXHAUST
FUEL/AIR
SYSTEMS
VELOCITY STACK
•Polished billet aluminum for that hot rod look
•Includes screen and all mounting hardware
•Made in the U.S.A.
PART #
DESCRIPTION
DS-288846
Mikuni HSR42 carb 99-06 Twin Cam
DS-288843
Mikuni HSR42 carb 92-99 Evolution Big Twin
DS-288499
S&S E and G carburetor 99-06 88" Twin Cam
DS-288279
S&S E and G carburetor 93-99 80" Evolution Big Twin
DS-288279
SUG. RETAIL
$169.95
169.95
189.95
189.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
DRAG STACK
ELECTRICAL
•A must-have for performance
•Precision CNC-machined from 6061 T-6 solid bar
•Overall length is 2"; internal bore is angled at 3°
•Features full 180° of front edge rollover for optimal vortex action
•Made in the U.S.A.
PART #
1010-0110
DESCRIPTION
For S&S Super D carburetor
7807-0005
SUG. RETAIL
$79.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
7807-0006
CABLES
BRAKES
TANKS &
OIL FILTERS
7807-0008
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
CHROME
VELOCITY STACKS
•Feature a one-piece
breather/support bracket
•No external breather lines
are necessary
•Available in short or long style
•Includes velocity stack with screen, breather support bracket and hardware
FOOTRESTS
& LICENSE
PLATE FRAMES
PRO-MOD BREATHER
FOR 93-09 BIG TWIN
PART #
SHORT
7807-0004
7807-0005
7807-0006
LONG
7807-0007
7807-0008
7807-0009
DESCRIPTION
SUG. RETAIL
For 40mm CV carb or 01-09 Delphi EFI (except 08-09 FLHT, FLHR, FLTR, FLHX)
For S&S E and G carb
For Mikuni 42/45/48 carb
$345.95
345.95
377.95
For 40mm CV carb or 01-09 Delphi EFI (except 08-09 FLHT, FLHR, FLTR, FLHX)
For S&S E and G carb
For Mikuni 42/45/48 carb
372.95
372.95
404.95
•Breather kit includes a breather bracket, which
features a hidden internal vent, a mini velocity
stack and chrome finish
•Includes a screen to keep large particles out
of the engine
•Made in the U.S.A.
PART #
1010-0133
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
SUG. RETAIL
For 93-09 Big Twin
w/ CV Carb or Delphi
fuel injection
(except 08-09 Dressers)
$173.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
383
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
NOSTALGIA
VELOCITY STACKS
•High-velocity stacks include
backing plate with breathers
and screen
•CNC-machined billet aluminum
•Available in chrome or black
anodized finish
1010-0318
•All mounting hardware included
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
CHROME
1010-0319
For 93-06 Big Twin w/ CV carb, 01-09 Big Twin
w/ Delphi EFI (except 08-09 Dresser)
$441.95
1010-0318
For 99-06 Twin Cam models w/ S&S E/G carb
441.95
FUEL/AIR
SYSTEMS
1010-0320
PART #
DESCRIPTION
BLACK ANODIZED
1010-0321
For 93-06 Big Twin w/ CV carb, 01-09 Big Twin
w/ Delphi EFI (except 08-09 Dresser)
1010-0320
For 99-06 Twin Cam models w/ S&S E/G carb
SUG. RETAIL
$369.95
369.95
1010-0306
DRAGSTAK INTAKE
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
•CNC billet aluminum
construction
•Inside cone deflects air for
improved performance
•4.375" overall length;
5" diameter mouth
•Optional water-repellent
cover also available
PART #
DESCRIPTION
FOR S & S E/G CARBURETORS
1010-0306
Satin Dragstak
1010-0307
Chrome Dragstak
1010-0307
SUG. RETAIL
$230.95
230.95
PART #
DESCRIPTION
FOR S & S E/G CARBURETORS (CONT)
1011-1041
Optional Dragstak cover
1011-1041
SUG. RETAIL
$27.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
2106-1008
4" DEATH STACKS
•Chrome billet aluminum velocity stacks
•Incorporate crankcase breathers
into the mounting brackets
•Stacks screw onto mounting brackets for clean installation
PART #
DESCRIPTION
SUG. RETAIL
2106-1008 For Mikuni HSR 42/45/48 carbs, 93-99 80" Evolution
$326.95
2106-1009 For S&S E and G carbs, 93-99 80" Evolution
326.95
VELOCITY STACK SCREEN
•Rubber ring with stainless screen
•Fits all velocity stacks with a 4" mouth
•Sold each
PART #
DESCRIPTION
1010-0265
4" screen
TANKS &
OIL FILTERS
SUG. RETAIL
$29.95
1010-0263/1013-0013
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
DIRECT BOLT-ON
VELOCITY STACKS
•Chrome-plated
1010-0046
billet aluminum
•Bolts on from the rear
•Includes one mounting screw and internal screen
PART #
1010-0046
1010-0264
DESCRIPTION
4" for S&S E and G carbs
4" for S&S D carbs
1010-0264
SUG. RETAIL
$220.95
218.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
384
VELOCITY STACK
•41/2" stack is CNC-machined from
billet aluminum and hand polished
•Made in the U.S.A.
PART #
DESCRIPTION
1010-0043
For S&S Super E and G carbs
SUG. RETAIL
$218.95
BILLET
CARBURETOR
SUPPORT
BRACKET AND
VELOCITY STACK
•CNC-machined from
billet aluminum and
polished to match
the motor
•Bracket has been
designed to mount
to the cylinder heads
and hold the carburetor in place
•Velocity stack mounts to the bracket; one-piece design so spacers
are not required; filter screen and stainless steel hardware included
•Support bracket and velocity stack sold separately
PART #
DESCRIPTION
SUG. RETAIL
FOR PATRICK RACING 128" MOTORS
1013-0013
Carburetor support bracket
$149.95
1010-0263
Velocity stack
249.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
6
WINDSHIELDS
TOURING
DS-288866
1012-0085
SEATS &
SISSY BARS
VELOCITY STACKS
•CNC-machined billet T-6 aluminum with a chrome
or black finish
•Hidden mounting design for a clean custom look
•High-volume air flow for increased horsepower
•Come with debris-catching screen and mounting hardware
•Available in a variety of applications
•Require the use of an air cleaner brace (sold separately)
•Patent pending
VELOCITY STACKS WITH SUPPORT BRACKET
•CNC-machined T-6 billet aluminum with a chrome
or black finish
•Feature a one-piece support bracket/breather
•Hidden mounting-bolt design for the clean custom look
•High-volume airflow for increased horsepower
•Come with debris-catching screen
and mounting hardware
•Breather bolts sold separately
PART #
CHROME
2110-0630
2110-0640
2110-0650
DESCRIPTION
SUG. RETAIL
For S&S E/G carb, 99-06 Twin Cam, chrome
For S&S E/G carb, 92-99 Big Twin, chrome
For 40mm CV carb, 99-06 Twin Cam, 01-05 EFI
Softail, 04-05 EFI Dyna and 02-05 EFI FLT, chrome
For 40mm CV carb, 93-99 Big Twin, chrome
For HSR 42/45 Mikuni carb, 99-06 Twin Cam, chrome
For HSR 42/45 Mikuni carb, 93-99 Big Twin, chrome
$279.95
279.95
For S&S E/G carb, 99-06 Twin Cam, black
For S&S E/G carb, 92-99 Big Twin, black
For 40mm CV carb, 99-06 Twin Cam, 01-05 EFI
Softail, 04-05 EFI Dyna and 02-05 EFI FLT, black
1012-0076 For 40mm CV carb, 93-99 Big Twin, black
1012-0077 For HSR 42/45 Mikuni carb, 99-06 Twin Cam, black
1012-0078 For HSR 42/45 Mikuni carb, 93-99 Big Twin, black
ACCESSORIES
1012-0034 92-99 Evolution bolt kit for Novello velocity stacks
for Mikuni carbs
1012-0035 99-06 Twin Cam bolt kit for Novello velocity stacks
for Mikuni carbs
2110-9696 Repl. screen
365.95
365.95
2110-0790
2110-0660
2110-0670
BLACK
1012-0088
1012-0074
1012-0075
LUGGAGE
1012-0088
2110-0630
279.95
279.95
279.95
279.95
EXHAUST
FUEL/AIR
SYSTEMS
PART #
DESCRIPTION
SUG. RETAIL
CHROME
DS-288866 For S&S E/G carbs, chrome
$173.95
DS-288867 For 40mm CV carbs or Delphi EFI systems, chrome
173.95
DS-288868 For HSR 42mm carbs, chrome
173.95
BLACK
1012-0085 For S&S E/G carbs, black
173.95
1012-0086 For 40mm CV carbs or Delphi EFI systems, black
173.95
1012-0087 For HSR 42mm carbs, black
173.95
ACCESSORIES
DS-288869 Repl. screen
2.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
365.95
365.95
365.95
365.95
LIGHTING
79.95
HANDLEBARS,
CONTROLS
& MIRRORS
79.95
5.95
VELOCITY STACKS
CABLES
•CNC-machined and given a brilliant chrome finish
•Fit Patrick Racing dual Mikuni 42mm carburetors
•Made in the U.S.A.
PART #
1010-0309
DESCRIPTION
Velocity stacks
SUG. RETAIL
$399.95
BRAKES
DUAL VELOCITY STACKS
•Chrome CNC-machined
T-6 billet aluminum
•Screw to the mounting base for the clean custom look
•High-volume airflow for increased horsepower
•Include debris-catching screens
•Available in short and long versions
•Fit dual 42mm Mikuni carb kits
•Made in the U.S.A.
PART #
2110-0690
2110-0069
2110-9696
DESCRIPTION
Short dual velocity stacks (2.4")
Long dual velocity stacks (3.6")
Repl. screen
TANKS &
OIL FILTERS
2110-0069
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
SUG. RETAIL
$203.95
248.95
5.95
FOOTRESTS
& LICENSE
PLATE FRAMES
DUAL VELOCITY STACKS
•Improve bottom, midrange and
top-end torque and horsepower
•For use with stock or modified motors
•Chrome-plated finish
•Include intake screens
•Made in the U.S.A.
PART #
DESCRIPTION
1010-0315
For 42mm dual Mikuni carburetors
TIRES,
TUBES &
WHEELS
AMBUSH INTAKE
FOR S&S
SUPER E AND G
CARBURETOR
HARDWARE,
CHEMICALS
& TOOLS
•Fits all S&S E and G carburetors
•Cool custom style like you've never seen before
•Highly polished chrome-plated finish
•Requires use of a carburetor support (sold separately)
SUG. RETAIL
$177.95
PART #
1010-0109
DESCRIPTION
Custom intake for S&S E & G carburetors
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$77.95
COVERS,
SECURITY
& GENERAL
385
SECTION
6
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
1023-0001
DS-289355
EXHAUST
0706-0017/1023-0008
FUEL/AIR
SYSTEMS
ENGINE
DS-289363
TRANSMISSION
& DRIVELINE
2211-0030
GASKETS
& SEALS
DS-289357
1023-0015
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
386
PERFORMER RPM WET NITROUS SYSTEMS
DS-289387
•Nitrous oxide provides serious horsepower at the push of a button
•Easiest way to get a huge horsepower increase; adjustable jetting for 20, 25, 30 or 35 horsepower
•Complete kits are specifically designed for individual applications
•To prevent the chance of detonation and costly engine damage, an electronic module and rpm sensor prevent nitrous activation below 4300 rpm
•Activation of nitrous at a low rpm is the cause of most engine failures with other systems; this is eliminated with the Performer system
•The Performer system activates the fuel solenoid just before the nitrous solenoid for a more accurate delivery of fuel and nitrous and more
reliable use
•Stainless steel jets will not erode like brass jets found in other systems
•Require the purchase of the correct nitrous plate for your carburetor or throttle body; carbureted applicaton should have a dual-outlet petcock
installed; sold separately
•2-lb. bottle kits come complete with all brackets and hardware
•12 oz. bottle kits require correct mounting brackets; sold separately
•Optional Double Bottle kit allows a second 12 oz. bottle to be added to existing 12 oz. nitrous kit; includes bottle, bottle bracket, hose and special
tee fitting – requires correct side frame brackets (sold separately)
•All bottles feature a highly polished finish
•Optional adjustable nitrous control module has two rpm settings; first setting controls the rpm level when the nitrous is activated, and the second
controls the rpm level when it is deactivated; tuner can select both minimum and maximum rpm settings
NOTE: Delphi fuel-injected bikes require the purchase of PART #1023-0015.
NOTE: 04-06 models require inductive rpm sensor PART #2211-0030 for installation of Edelbrock Wet Nitrous systems.
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG.
NITROUS SYSTEMS
MOUNTING BRACKETS FOR 12 OZ. BOTTLE ONLY
DS-289359
Kit w/ 12 oz. bottle for 00-06 Softail
$1,259.95 (2 REQUIRED PER BOTTLE) (CONT)
11/2” frame bracket (ea.)
DS-289360
Kit w/ 2 lb. bottle for 00-06 Softail
1,384.95 DS-289375
13/8” frame bracket (ea.)
DS-289355
Kit w/ 12 oz. bottle for 84-99 Softail
1,269.95 1023-0003
DS-289356
Kit w/ 2 lb. bottle for 84-99 Softail
1,398.95 OPTIONAL/REPLACEMENT COMPONENTS
Adjustable nitrous control module
DS-289357
Kit w/ 12 oz. bottle for 99-05 Dyna
1,238.95 1023-0004
“Double Bottle” 12 oz. bottle kit
DS-289358
Kit w/ 2 lb. bottle for 99-05 Dyna
1,369.95 DS-289387
Taper face jet .024” (ea.)
DS-289353
Kit w/ 12 oz. bottle for 91-98 Dyna
1,203.95 DS-289377
Taper face jet .026” (ea.)
DS-289354
Kit w/ 2 lb. bottle for 91-98 Dyna
1,334.95 DS-289378
Taper face jet .028” (ea.)
DS-289351
Kit w/ 12 oz. bottle for 84-94 FXR
1,212.95 DS-289379
Taper face jet .030” (ea.)
DS-289352
Kit w/ 2 lb. bottle for 84-94 FXR
1,344.95 DS-289380
Taper face jet .034” (ea.)
1023-0001
Kit w/ 2 lb. bottle for 84-98 Evo Dresser
1,477.95 DS-289381
Repl. nitrous solenoid
1023-0002
Kit w/ 2 lb. bottle for 99-06 Twin Cam Dresser
1,481.95 DS-289367
Repl. fuel solenoid
1023-0005
Kit w/ 12 oz. bottle for 95-03 XL
1,205.95 DS-289368
Nitrous solenoid repair kit
1023-0007
Kit w/ 2 lb. bottle for 95-03 XL
1,360.95 DS-289369
DS-289370
Fuel solenoid repair kit
NITROUS PLATES
DS-289371
2 lb. polished bottle only
DS-289361
For OEM Keihin CV, 40/42mm Mikuni, Edelbrock
spigot mount carb
121.96 DS-289372
12 oz. polished bottle only
DS-289362
For OEM 44mm Screamin’ Eagle, 45mm Mikuni
DS-289388
12 oz. bottle brackets (ea.)
spigot mount carb
123.95 DS-289382
Glycerin-filled nitrous pressure gauge (0-1400 psi)
DS-289363
For S&S E series, Edelbrock flange mount carb
95.95 DS-289383
#4 AN purge/gauge adapter
DS-289364
For S&S G series flange mount carb
96.95 DS-289384
Repl. fuel filter
DS-289365
For S&S D series flange mount carb
96.95 DS-289385
Repl. fuel pump
1023-0015
For 01-05 Delphi fuel injection
214.95 0706-0017
10” -3 AN red fuel line
MOUNTING BRACKETS FOR 12 OZ. BOTTLE ONLY (2 REQUIRED PER BOTTLE)
1023-0008
10” -3 AN nitrous line
DS-289373
11/8” frame bracket (ea.)
48.95 2211-0030
Inductive rpm sensor
DS-289374
11/4” frame bracket (ea.)
45.95
All part numbers in BOLD MAGENTA are new for 2009.
RETAIL
$45.95
45.95
231.95
308.95
8.95
8.95
8.95
8.95
8.95
107.95
82.95
41.95
41.95
214.95
201.95
64.95
74.95
22.95
47.95
182.95
24.95
26.95
74.95
SECTION
6
WINDSHIELDS
1023-0010
1023-0012
TOURING
LUGGAGE
THUNDERMAX NADS
(NITROUS ASSIST DRY SYSTEM)
•Adds up to 30 horsepower in 30 minutes
•Delivered 95% prebuilt and ready to install;
no bulky fuel pumps, fuel lines or sandwich
plates required
•ThunderMax "dry" system works with the
ThunderMax ECM (sold separately) to deliver the
extra fuel required through the fuel-injection system
whenever nitrous is activated; bulkier "wet" systems usually
use a second outlet from the gas tank and a pump
to supply the required pressure
•Once the arming switch is turned on, the ThunderMax ECM
activates the nitrous and extra fuel after three parameters
are met: bike speed, rpm and throttle open
•The NADS kit includes the air cleaner backplate, nitrous solenoid, spray nozzle, arming switch assembly, air filter and nitrous line
•Model-specific bracket/bottle kits mount the nitrous bottle to the front frame downtube, requiring only a single line to be run from the nitrous tank
to the solenoid on the air cleaner backplate
•NADS kit and bracket/bottle kits are sold separately
•Compatible with ThunderMax Open or Closed Loop Systems
•Maps available online at www.thunder-max.com
NOTE: Legal in California only for racing vehicles which may never be used upon a highway.
PART #
DESCRIPTION
FOR 01-06 BIG TWIN MODELS EQUIPPED WITH DELPHI EFI
1023-0010
NADS kit
1023-0011
FLT bracket and 12 oz. bottle kit
1023-0012
FXST bracket and 12 oz. bottle kit
1023-0013
FXD bracket and 12 oz. bottle kit
SUG. RETAIL
$669.95
367.95
367.95
367.95
PART #
DESCRIPTION
SUG. RETAIL
FOR 01-06 BIG TWIN MODELS EQUIPPED WITH DELPHI EFI (CONT)
1023-0014
12 oz. nitrous bottle only
$214.95
1020-0324
Data port "Y" harness (required if using NADS
w/ ThunderMax Auto-Tune closed loop module)
34.95
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
NITROUS CONVERSION KIT
REFILL PUMP STATION
•Designed for performance retailers
in the business of nitrous bottles
•Quick, safe, easy and only takes a
couple of minutes to refill bottles
•Compressed air operated; requires
no electricity
•Kit includes plumbing, hoses, valve, fittings and bottle stand that transfers
nitrous from mother bottle to receiving bottle instantly
NOTE: Refill station will require three to four items not included with the kit. 1. Compressed air
supply (80-100 psi). 2. Mother bottle (available through local gas supplier). 3. Scale (bottles are filled
by weight). 4. A water separator/filter (this will help pump service life).
PART #
7807-0035
DESCRIPTION
NOS refill pump station
SUG. RETAIL
$1,550.95
•Designed to adapt your existing 2-lb.
non-dresser nitrous kit to EVO and Twin Cam
dressers (with fiberglass bags)
•Includes everything you need to install
Edelbrock's 2-lb. DOT-approved polished
nitrous bottle
•Allows you to install the bottle inside
a saddlebag for a "hidden" installation
•Includes all necessary brackets, hoses
and fittings for the conversion
•2-lb. bottle not included
PART #
1023-0006
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
For 84-06 Big Twin
dressers
SUG. RETAIL
$264.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
387
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement