User Manual PiPO Max-M6 Tablet with Android 4.2

Add to my manuals
26 Pages

advertisement

User Manual PiPO Max-M6 Tablet with Android 4.2 | Manualzz

User Manual

PiPO Max-M6

Tablet with Android 4.2

Contents

Welcome

...................................................................................................................

Important Notices

...................................................................................................

Keys and Functions

.................................................................................................

I. Getting Started

.....................................................................................................

1.1 Turn on/off

..........................................................................................................

1.1.1 Turn on

..............................................................................................................

1.1.2 Turn off

..............................................................................................................

1.2 Lock/unlock the screen (sleep mode)

.......................................................

1.3 Connect to computer

....................................................................................

II. Your Home Screen

..............................................................................................

2.1 Change wallpaper for home screen:

........................................................

2.2 Add/delete applications on home screen:

.............................................

2.3 Add widgets to home screen:

......................................................................

III. Network Connection

.........................................................................................

3.1 Wi-Fi

.......................................................................................................................

3.1.1 Turn on Wi-Fi

....................................................................................................

3.1.2 Turn off Wi-Fi

....................................................................................................

3.1.3 Add a Wi-Fi network

.....................................................................................

3.2 Bluetooth

.............................................................................................................

3.2.1 Make device discoverable

........................................................................

3.2.2 Scan for devices

............................................................................................

3.2.3 Pair with the Bluetooth device

..................................................................

3.3 3G Network

........................................................................................................

3.3.1 External 3G Network

.....................................................................................

3.3.2 Internal 3G support

.......................................................................................

IV. Internet Browsing

...............................................................................................

4.1 Internet Browsing

..............................................................................................

V. Install and Manage Apps

............................................................................

10

5.1 Install Apps

......................................................................................................

10

5.2 Manage Apps

...............................................................................................

10

VI. Multi-media Functions

..................................................................................

11

6.1 Music

................................................................................................................

11

6.2 Video

................................................................................................................

11

6.3 Gallery

.............................................................................................................

12

6.4 Camera

...........................................................................................................

13

6.5 E-book reader

................................................................................................

14

VII. Settings

............................................................................................................

16

. Battery

..............................................................................................................

20

IX .Firmware Upgrading Procedures

..............................................................

20

Troubleshooting

...................................................................................................

25

e c o me

Thank you for purchasing this tablet.

It brings you much convenience for your business (supports Word, Excel, send

& receive e-mails...) and entertainment (supports 3D game, chatting, movie playback, eBooks.....).

Running on

Android 4.2

, with a 1.6 GHz processor and highly responsive capacitive touch screen, it brings you wonderful user experience.

Before beginning, please refer to this user manual carefully.

m p o a N o c es

While using the earphone, if the volume is excessively high it may cause hearing damage. So please adjust the volume of the player to a moderate level and balance the time of using.

Do not disconnect the tablet suddenly when formatting or uploading and downloading, which can lead to program errors.

Do not dismantle the tablet by yourself, and do not use alcohol, thinner or benzene to clean its surface.

The tablet dose not support USB charge. If you want to charge the tablet, please use the AC adaptor supplied. Please use the original accessories.

Read this User Manual carefully, Make sure you know how to upgrade the tablet, other wise do not upgrade it by yourself

G e n g S a e d e y a n d F u n c o ns

1. Volume - Press to reduce the volume

2. Volime +

3.

“Back”

4. Front camera

Press to increase the volume

Press to return to the previous menu

2Mp front-facing camera

5. Speaker

6. Speaker

AAC Speaker

AAC Speaker

7. Power and lock key

Hold and press to turn on or turn off this unit.

Briefly press to turn on or turn off the screen.

8. Micro SD-card slot

9. HDMI port

To insert Micro SD-cards

To connect to TV or display via HDMI cable

10. Micro-USB slot slot data (e.g., music, videos, photos, and other files).

11. Power jack

(DC input)

Connect to a 5V output adaptor included in the accessories

G e n g S a e d

12. MIC

MIC

13. Earphone jack

14. SIM card slot

To connect your earphone

15. Rear Camera

16.

“Reset”

17. TF-card slot

To insert SIM card connecting to mobile network

5Mp rear camera

Press to reset the tablet if it freezes or behaves abnormal. (Use a paperclip or other sharp object to stab this reset hole, and then press power button to turn it on.)

To insert your TF card

1.1 Turn on/off

1.1.1 Turn on

To start your tablet, press and hold the power key at the right side of your tablet for a while. Tap and drag the lock out of the circle to unlock.

Tap and drag the lock out of the circle to unlock.

Drag the lock to right: you will go to the home screen.

Drag the lock to left: you will go to camera directly.

1.1.2 Turn off

To power off your tablet, press and hold the power button until the

“Would you like to shut down?

” dialog appears and tap “OK” to power it off.

G e n g S a e d

1.2 Lock/unlock the screen (sleep mode)

To save battery, you should put your tablet in sleep mode by turning off the

LCD display. To do this, shortly press the power key. Press it again to wake up the screen.

1.3 Connect to computer

You can connect your tablet to your computer with the supplied USB cable so you can transfer media files.

I

I

Y o H o m e S c e en

a b c

d e f g h i j K

a. Google search Tap to enter Google search page b. Voice search Tap to open voice search c. All apps

Tap to show all the applications installed

Launcher d. ESC key e. Home f. Recent operations

Tap to return to the previous screen/ page.

Tap to return to your home page

Tap to show your recent operations g. Screen shoot To take screen shoot

When connect to PC, this icon will show here. Slide to h. Volume -/+ choose connected as a media device or camera i. System time Show the system current time j. Wi-Fi Wi-Fi signal show here if connected with Wi-Fi k. Battery status Show battery status

2.1 Change wallpaper for home screen:

Tap and hold your finger in any blank space of the home screen, you will see a pop-up options; you can choose wallpaper from Gallery, live Wallpapers or

Wallpapers.

2.2 Add/delete applications on home screen:

There are several apps in the home screen, you can also add more frequently-used app icons in this home page and delete some less frequently-used ones.

Tap the app launcher in the top right corner to go to all apps panel, tap and move the app you want to the home screen.

To delete an app from home screen, tap and hold it, and then move it to the remove icon.

2.3 Add widgets to home screen:

Tap all Apps launcher

→Tap WIDGETS. There are Analog clock, bookmarks, calendar, Email, and lots of other widgets. Drag the widget you want to the home screen.

Tips: Besides your home screen, you can access to other four panels by sliding left or right in your home screen. You can also customize these panels.

I

I

I....N

e w o k C o n n e c o n

3.1 Wi-Fi

Wi-Fi can only be used when it connects with home Wi-Fi Access Point (AP) or a free unsecured Wi-Fi hotpot. Under

“Wireless & networks”, tap “Wi-Fi” to turn it on. After a moment, your Wi-Fi network list should populate. If you need to rescan for available networks, tap "scan"

3.1.1 Turn on Wi-Fi

Within the App Panel, tap

“Settings” → then “Wireless & networks” → “Wi-Fi” to turn on wifi.

Your tablet lists the networks it finds within range. Tap a network to connect. If necessary, enter Network SSID, Security, and Wireless password, and tap

“Connect”. When your tablet is connected to the network, the wireless indicator appears in the status bar. Waves indicate connection strength.

3.1.2 Turn off Wi-Fi

Please turn off Wi-Fi if you

’re not using it to save the battery. To turn off Wi-Fi,

Tap it again.

3.1.3 Add a Wi-Fi network

Users may also add a Wi-Fi network under

“Wi-Fi settings”. In “Wi-Fi settings”, tap

“Add network”. Enter the SSID (name) of the network. If necessary, enter security or other network configuration details. Touch Save.

3.2 Bluetooth

3.2.1 Make device discoverable

You must pair your tablet with a device before you can connect to it. Once you pair your tablet with a device, they stay paired unless you unpair them.

Under

“Settings”, choose “Bluetooth”. Tap Bluetooth to turn on it and tap

“Search for devices”. The Bluetooth indicator then appears in the status bar.

3.2.2 Scan for devices

After scanning, there will be a list of the IDs of all available Bluetooth devices in range. If the device you want to pair with isn

’t in the list, Ensure that the other device is turned on and set to be discoverable.

3.2.3 Pair with the Bluetooth device

Tap the name of an available Bluetooth device to pair with. In the popup

“Bluetooth pairing request” dialog, type a PIN.

If the pairing is successful, your tablet connects to the device.

Example: to transmit a photo

Go to “Gallery”, choose a photo to share. Tap any spot on the photo to view a submenu. Tap icon

, and then choose the device name in the Paired devices list. The photo will then be sent.

You can touch the right icon to unpair the device.

Note: After pairing, it shows under the Bluetooth device

“Paired but not connecte d”, but file transmission is still possible.

You can see the received files by touching the right corner icon. At present, the

Bluetooth function only supports files transmission. To extend battery life, turn

Bluetooth power off when not in use.

3.3 3G Network

3.3.1 External 3G Network

A 3G network is a mobile network that allows high-speed data access and advanced network capacity.

This tablet supports external 3G network by a 3G dongle. You can connect the

3G dongle to HOST port via the OTG convertor cable (the shorter one). You can find the convertor cable in the accessories. However, this tablet supports some 3G dongles, but not all dongles. If you need a special dongles to support, please check with the shop before you buy it.

3.3.2 Internal 3G support

You can access to the Internet via your 3G SIM card while Wi-Fi network is not available. Please insert your 3G card into the SIM card slot of the tablet, and the tablet will obtain 3G signal automatically.

Frequency: This tablet support WCDMA SIM card

HSPA/WCDMA: 2100/900MHz

GSM/GPRS/EDGE Quad band

850/900/1800/1900

3G download speed maximum 7.2M bit/s, upload maximum: 5.76M bit/s

n e n e B o w s n g

4.1 Internet Browsing

Before using your browser, make sure Wi-Fi or internet is connected.

In your app panel, Tap the browser icon to open your browser.

Tap the address bar, the Android keyboard will appear for your entry of keywords or URL.

New tap bookmark this page Open bookmarks submenu

Tap the icon in the top corner of the brower page to open the submenu.

n s a n d M a n a g A p p s

5.1 Install Apps

Go to the

“ApkInstaller” to install and manage your apps. To install an application, follow below steps:

1. Tap to open the

‘APKInstaller’ → ‘Install’ → then tap “Internal Memory” or

“TF Card”. Available .apk files will appear at the right side. Touch the required one to install it.

Note:

Make sure the .apk file is workable on android 4.1, and the suffix is .apk. e.g.

“angrybirds.apk”.

In some cases, there may be no icon on in the App Panel after a .apk file is installed. Possible reasons may be that this app is not compatible with your OS or the downloaded .apk file is a broken one so you may need to download a full version.

5.2 Manage Apps

Tap to open the

‘APKInstaller’ → ‘Manage’. Tap the app and then you can launch, export, uninstall it.

10

You can also go to

“AppS” under “Settings” to manage apps.

M u m e d a F u n c o ns

6.1 Music

After loading your music into your tablet, tap the music icon to open the music player. You can select songs by Artist, Albums, songs or Playlists. Tap to select. The media player allows you to shuffle, skip, or pause your current selection and even displays the album artwork when available.

Tap

6.2 Video

in the bottom line to open a submenu in music playing page.

You can play videos saved in your tablet or TF card. To play, tap Video icon to launch the video player:

11

Tap the video you would like to play. Tap the screen to show the video tool bar.

You can play back, fast forward, pause your video here. You can also add bookmark for your video, adjust brightness, or set screen ratio here. Here is the toolbar:

With the Wi-Fi on, you are also able to view an on-line video.

6.3 Gallery

You can view, show off, and even edit your digital pictures on the table t’s full color, high-resolution display. After loading your media, tap Gallery display your pictures: to

12

Tap the picture you want to display it, and slide right or left to show other pictures.

Tap the menu icon, you can edit, rotate, crop, or set it as wallpaper.

6.4 Camera

Tap the icon to open camera. Your tablet is with built in 0.3M front camera. You can take a photo, or a video.

Note: After you power on your tablet, you can go to camera directly by drag the lock to left.

To view photos

To select Front/ back camera

Tap to take a photo

Set white balance,

Scene mode, etc.

Pan-shot

Change to video-taking

Interface

13

6.5 E-book reader

The tablet supports many eBook formats like PDF, Text, E-Pub, FB2....

Tap the

“e-book” the book and read. icon to open e-book shelves. Tap an e-book to open

You can page up or page down by sliding your finger right or left.

Tap or the menu button to check the sub-menus. You can set the font size, Go To Page jump, check your bookmarks, set the auto flip time, etc.

6.6 E-book reader

In Explorer , you can manage all your files. You can copy, delete, paste, or rename your files in your Micro SD card, Internal Memory and USB disk.

14

For example, to copy files from "Internal Memory" to micro "SD card":

1,Open "explorer" you will see the above interface

2, tap "Internal Memory" to see files in your tablet

3, Tap "Multi" icon and then select the files you want to edit

4, Tap "Editor" icon, you will see a pop-up menu, sellect "copy"

15

5, tap "Home" icon in the top left to return to the main inferface, select "SD card", Tap "Editor" icon, you will see a pop-up menu, select "Paste".

Files are copied from your tablet to your Micro SD card now.

S e n gs

Tap the

“Settings” icon to go to settings. you can check and set wireless&networks, sound, display, storage, Battery,

Accounts &sync, security, language, date&time, about tablet, etc.

Wi-Fi:

tap

“Settings” → “Wireless & networks” to turn on wifi and scan. It will show a list of Wi-Fi networks scanned in range. Choose a strong Wi-Fi network to connect. (You may need to input the password).

Bluetooth:

Turn on Bluetooth, enable the file transmission

Data usage:

VPN

:

First, set a locked screen before adding VPN profile,

16

You may choose what ever screen lock you like, pattern, PIN, password.

Bellowing I select Pattern as an example.

17

Secondly, after setting the screen lock, you could add A new VPN. Create your

VPN name, input the server address, and then click

“save”

[Input What ever name you want to show on the VPN]

And then input your VPN account and password

And , finally, VPN settled.

Portable hotspot

: turn on Wi-Fi and turn on hotspot by ticking the square.

18

And then create hotspot. Set up network ID, select the security type.

When hotspot is set up , there will be an icon appearing, like this, the Wi-Fi signal is surrounded by a white square:

Ethernet:

Even thought there is no Ethernet menu in the setting, the M5

3G supports Ethernet function, it will connect to Ethernet automatically by connecting Ethernet cable.

Mobile networks

:

Turn on

“Mobile Networks”→ “Data enabled” and

“Modem power” . Whether you use a 3G dongle or SIM card, it’s required to turn on

“Data enabled” for mobile data transmission .

Display:

Tap

“Settings” → “Display” to set brightness, screen time-out, etc.

HDMI:

Turn on HDMI, connect to the

“HDMI” port via the HDMI cable.

Screenshot setting:

switch on or switch off screenshot here. The screenshot icon will appear on the status bar.

Storage:

Check internal storage here. If you insert an Micro SD card, or USB disk, you can check the total and available space for your Micro SD card or

USB disk. Please unmount it to safely remove it.

Battery:

Check the Battery status here.

Language & input:

to set language and keyboard input.

Backup & reset:

choose to go to submenu "back up my data" and "Factory data reset". If you choose factory data reset, all data from your tablet's internal storage will be erased. Choose this option carefully.

19

About Tablet:

To check information about your tablet, such as Model number, android version, etc.

.Ba

errrry

Very Low Battery Full Battery Charging Battery

‘ ’ indicates that the power of Battery is full. When the battery level becomes too low, a prompt comes up to note you to charge your tablet.

While charging, you can check the charging status in the lock screen:

It takes around 5 hours to charge your tablet to full battery. Please only use a

5V /2A adaptor included in the gift box to charge it.

IX.FirmwareUpgradingProcedures

9.1 warnings before upgrading

1. Please read the below carefully when you try to upgrade your tablet.

2. Please make sure that the firmware matches your tablet.

3. Please backup your data before upgrading, the storage will be formatted when upgrading, data will be lost and unrecoverable.

4. Please do not touch any buttons on the tablets while it is upgrading.

5. Make sure that your tablet is with enough power, you’d better charge the tablet before upgrading, in case of upgrading failure due to low battery.

6. Please proceed in accordant with the instructions strictly.

9.2 Preparations work before upgrading

20

Please download the “upgrade tool” from this PIPO website, http://www.pipo.cn/En/index.php?m=About&a=gujian_show&id=70

Please download the corresponding firmware from PIPO website, http://www.pipo.cn/En/index.php?m=About&a=gujian

9.3 How to upgrade

1. Decompress the upgrade tool, double click the “RK batch Tool” icon, as the bellowing

2. Click , choose the firmware downloaded. Then charge your tablet with power adapter, and USB cable connects tablet and PC.

21

press the ESC key for a few seconds, at the same time press “reset”, release ESC until the tool finds your tablet, make you tablet set into upgrading mode.

3. After the PC finding out the tablet, and the device icon turns green, click “upgrade” for upgrading.

22

Note

: If the device detected under the status of Pink , please click “Switch”, the upgrading status will switch to Green (standby status)

The tablet is upgrading the firmware

23

The tablet will turn on automatically, now you could disconnect the tablet to the PC.

9.4 Instructions of Installing Rock chip USB driver

If you do the upgrading for the first time, please install the Rock chip USB driver in accordant with the bellowing instructions.

If you are upgrading via your PC for the first time, it requires your PC to install Rock chip USB driver, after your tablet entering into upgrading mode, it will pop out a guide advising you that the PC finds new hardware. Select manually install and then click “next”

Select the USB driver in accordant with your PC system, the driver is included in the “RK batch tool”. Then the PC will install the USB driver automatically. After finishing USB installing, go back to upgrading mode.

Note

If your PC is with Win7 or Vista system, it will not pop out the guide leading you to install the driver, you get to install the driver in “My

Computer”.

1. Right click “My Computer”, select “Device Manager”

2. There will be an “Unknown Device” with an exclamation mark appears

24

3. Right click the “Unknown Device”, select “renew driver software”

4. Load the USB driver included in the “RK batch tool” to install the USB driver.

Note:

Do not turn on “USB Debugging” in the setting when upgrading firmware.

5. When you finish the driver installation, you can come back to upgrading procedures.

Troubleshooting

1. Can not turn on the tablet

Check the tablet’s power level; please charge it before starting it. In case your tablet still cannot be turned on, you may try to reset it

2. No sound from earphone

Check if volume is set to ‘0’. Or earphone may be broken, please change for another one.

3. Big noise

Check if there is dust in the earphone or speaker. Check if the file is broken.

4. Screen drift or unresponsive screen

To pin the reset button to reset your tablet and power it on again.

5. Application not workable

Possible reasons may be that this app is not compatible with your OS or the downloaded .apk file is broken so you may need to download a full version.

6. How to delete a Google account?

If an account is added, the account is shown in “Accounts & sync” of

“Settings”, where you may also add another account. To delete an undesired account, go to “Settings” → “Privacy settings” → “Factory data reset”. Your tablet’s internal storage, downloaded apps, etc. will also be deleted, except the info in your flash memory. Be careful before you carry out this operation.

7.USB unmounted, SD card unmounted

Some times after inserting SD card or USB, it will show on the tablet that

“unmounted”, do the factory reset by “setting” – “backup & factory reset”, and then turn off and turn on tablet once again. If fail, you have to upgrade the firmware.

25

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement