LC - Peritia

LC - Peritia
Inorganic Analysis
Chromatography
Molecular Spectroscopy
Thermal Analysis
Informatics
Consumables and Accessories 2002 Catalog
– critical supplies
for your analytical instrument
Atomic Absorption
Inductively Coupled
Plasma – OES and MS
Liquid Chromatography
Gas Chromatography
UV Visible, Fluorescence, and Polarimetry
Thermal and Elemental Analysis
Infrared Spectroscopy
Ordering Information
How to Order
1.800.762.4000 US
www.perkinelmer.com/essentials
IN THE U.S.
IN CANADA
Order Online
Order Online
Place your order online at www.perkinelmer.com/
essentials. Online ordering currently is available
in the U.S., Puerto Rico, and Canada.
Place your order online at www.perkinelmer.com/
essentials. Online ordering currently is available
in the U.S., Puerto Rico, and Canada.
Call Toll Free 1-800-762-4000
Call Toll Free 1-800-561-4646
Monday through Friday from 8:00 a.m. to 7:00 p.m. EST.
Monday through Friday from 8:30 a.m. to 5:00 p.m. EST.
Fax Us Your Order
Fax Us Your Order
Fax your company Purchase Order to 203-944-4905.
Fax your company Purchase Order to 1-905-851-1814.
RETURN GOODS POLICY
Before returning any item to PerkinElmer, please obtain
a Return Authorization Number from a customer service
representative. Call toll free 1-800-762-4000 in the U.S.
or 1-800-561-4646 in Canada. Please have the following information ready:
1. Our Order Number or your Purchase Order Number.
2. The PerkinElmer part numbers of the items that you
wish to return.
3. Reason for return.
Our customer service representative will provide you
with an RMA number and the return address.We cannot accept any returns without an RMA number.
TECHNICAL SUPPORT
E-mail Us Your Order
E-mail Us Your Order
Visit our Web site at www.perkinelmer.com/essentials
or e-mail us at [email protected]
Visit our Web site at www.perkinelmer.com/essentials
or e-mail us at [email protected]
Mail Us Your Order
Mail Us Your Order
Mail your company Purchase Order to:
PerkinElmer Instruments
710 Bridgeport Avenue M/S 270
Shelton, CT 06484
Visa, MasterCard, and American Express are accepted.
Mail your company Purchase Order to:
PerkinElmer Canada
501 Rowntree Dairy Road
Unit 6
Woodbridge, ON
Canada L4L 8H1
Call toll free 1-800-762-4000 in the U.S.
or 1-800-561-4646 in Canada. 8:30 a.m.
to 5:00 p.m. EST.
OUTSIDE THE U.S. & CANADA
Contact your local sales office. A full list of Worldwide
Support numbers follows the Table of Contents.
Chiller for ICP/ICP-MS
page ICP-5
Deuterium Lamp
page LC-13
NewGuard® Column
pages LC-32 and LC-33
NCI 901/902 Interfaces
page GC-46
THGA Graphite Tubes
page AA-20
Table of Contents
1.800.561.4646 Canada
SECTION
PAGE
Atomic Absorption
AA-1 to AA-51
Lumina Hollow
Cathode Lamps
pages AA-2 to AA-4
ICP
Inductively Coupled Plasma – OES and MS
ICP-1 to ICP-32
LC
Liquid Chromatography
LC-1 to LC-49
Headspace Septa
page GC-3
GC
Gas Chromatography
GC-1 to GC-98
UV
UV Visible, Fluorescence, and Polarimetry
UV-1 to UV-19
FLR-20 to FLR-28
PLR-29
Deuterium Lamp
page UV-19
TEA
Thermal and Elemental Analysis
TEA-1 to TEA-44
IR
Infrared Spectroscopy
IR-1 to IR-20
Aluminum Sample
Pans and Covers
page TEA-4
Index
IND-1 to IND-22
Terms and Conditions
TC-1 to TC-4
IR Cells and Windows
page IR-3
www.perkinelmer.com/essentials
AA
Worldwide Support
1.800.762.4000 US
www.perkinelmer.com/essentials
Austria
Tel: 0 800 111 933
Fax: 0 800 111 934
Australia – Melbourne
Tel: 61-3-92128500
Fax: 61-3-92128595
Argentina
Tel: 5411-4554-4004
Fax: 5411-4554-2807
Belgium
Tel: 0 800 40 858
Fax: 0 800 40 859
Bolivia
Tel: 591-2-241-3011
Fax: 591-2-241-0639
Brazil
Tel: 55-11-3145-3600
Fax: 55-11-3145-3610
55-11-3145-3620
55-11-3145-3630
Canada
Tel: 800-561-4646
Fax: 905-851-1814
CIS
Tel: 7 095 935 8888
Fax: 7 095 564 8787
Chile
Tel: 562-655-1600
Fax: 562-269-8070
China – Beijing
Tel: 86-10-65882930
Fax: 86-10-65886392
Columbia
Tel: 574-311-0234
Fax: 574-268-3131
Costa Rica
Tel: 506-220-0600
Fax: 506-231-0678
Czech Rep.
Tel: 420 2 4143 0534
Fax: 420 2 4143 0535
Denmark
Tel: 8088 4236
Fax: 8088 4237
Ecuador
Tel: 593-22-444-363
593-22-263-537
Fax: 593-22-351-502
Egypt
Tel: 20 2 391 7261
Fax: 20 2 392 1162
El Salvador
Tel: 503-249-7777
503-249-7774
Fax: 503-249-7788
Mexico
Tel: 52 55 56 51 70 77
Fax: 52 55 55 93 62 23
52 55 56 60 77 34
Finland
Tel: 0 800 117 186
Fax: 0 800 117 185
The Netherlands
Tel: 0 8000 23 4490
Fax: 0 8000 23 4491
France
Tel: 0 805 111 333
Fax: 0 805 111 334
Nicaragua
Tel: 505-263-3114
505-263-3115
Fax: 505-233-1846
Germany
Tel: 0 6106 610 0
Fax: 0 6106 610 119
Guatemala
Tel: 502-4355360
502-4354110
502-4336030
Fax: 502-4354464
Honduras
Tel: 504-220-4700
Fax: 504-220-5426
Hong Kong
Tel: 852-25900238
Fax: 852-25900513
Hungary
Tel: 36 1 251 1116
Fax: 36 1 251 1461
India
Tel: 91 22 533 5606
Fax: 91 22 533 5940
Indonesia
Tel: 62-21-5332450
Fax: 62-21-5348316
Italy
Tel: 39 39 23831
Fax: 39 39 2383 490
Japan – Yokohama
Tel: 81-45-3148381
Fax: 81-45-3145142
Japan – Osaka
Tel: 81-6-63866004
Fax: 81-6-63867009
Korea
Tel: 82-2-5922998
Fax: 82-2-34787979
Luxembourg
Tel: 0 800 26 588
Fax: 0 800 26 589
Malaysia
Tel: 60-3-79581118
Fax: 60-3-79585688
Norway
Tel: 800 18854
Fax: 800 18855
Panama
Tel: 507-239-1501
Fax: 507-615-7720
Poland
Tel: 48 22 543 7171
Fax: 48 22 543 7170
Philippines
Tel: 63-2-6370180
Fax: 63-2-9101168
Singapore
Tel: 65-68962118
Fax: 65-68962148
South Africa
Tel: 27 11 471 0760
Fax: 27 11 679 4895
Spain
Tel: 8000 99 164
Fax: 8000 99 165
Sweden
Tel: 0 200 88 75 20
Fax: 0 200 88 75 21
Switzerland
Tel: 041 785 77 55
Fax: 041 785 77 95
Taiwan
Tel: 886-2-27647199
Fax: 886-2-27647209
Thailand
Tel: 662-3198075
Fax: 662-3197900
United Kingdom
Tel: 44 1494 874515
Fax: 44 1494 679331
United States
Tel: 800-762-4000
Fax: 203-944-4905
e-ssential supplies for…
Liquid
Chromatography
For over 25 years, PerkinElmer has designed, manufactured, and supported a full
line of HPLC instruments and accessories. The Series 200 Autosampler delivers
flexibility, reliability, and ease-of-use that exceeds those found in other standard
autosamplers. Add the Series 200 Autosampler to any HPLC system. Its compact,
stackable, and well-executed engineering design provides extraordinary
precision and the most reliable automation to your laboratory.
Series 200 QA/QC System
Top-selling e-ssentials for…
Liquid Chromatography
QUICK-FIND INDEX
Deuterium Lamp
PerkinElmer Deuterium Lamps, for the Series 200 UV/Vis
Detector, provide outstanding performance and lamp life.
Lamp changes are quick and easy due to a unique, selfaligning lamp mount.
LC-13
Part No. N2920149
5-Channel Vacuum Degassing Package
Extend the performance of your pumps by using a solvent
degassing system. The package includes a vacuum degasser,
two 1 L bottles with caps, two 2 L bottles with caps, solvent
tray and organizer (degasser only shown). See page LC-12
for a complete selection.
LC-12
Part No. N2600508
Stainless Steel Injector Needle
Ensure the maximum precision and accuracy of your analysis
with genuine PerkinElmer spare parts. These replacement
parts are identical to the components contained in your
Series 200 Autosampler at the time of purchase. See page
LC-3 for our full selection of needles and syringes.
Part No. N2930023
LC-3
NewGuard® Column – RP-18,Aquapore ODS,
7 µm Spherical and NewGuard Holder
NewGuard cartridges prolong column life two to five fold by
eliminating particulates, contaminants, and strongly bound
sample components. They act as replaceable, disposable
heads of your analytical columns. NewGuards are available
in a convenient three-pack.
LC-32
NewGuard Column Part No. 07110092
to LC-33
NewGuard Holder Part No. 07150001
100-Position Peltier Tray
and Peltier Controller
Ensure complete sample integrity with the Peltier Tray for
the Series 200 Autosampler. Holds 100 2.0 mL vials which
can then be cooled or heated. See page LC-1 for our full line
of trays and plates.
LC-1
Peltier Tray Part No. N2930035
Peltier Controller Part No. N2930036
Autosampler Supplies
and Accessories
LC-1
HPLC Pump Accessories
and Spare Parts
LC-6
LC Detector Supplies
and Accessories
LC-13
TotalChrom™ Chromatography
Software,Turnkeys,and Interfaces LC-19
HPLC Columns
LC-24
HPLC Column Applications
LC-35
LC Fittings,Tubing,
and Other Accessories
LC-45
LC Autosamplers
Our unique XYZ design allows you to take advantage of the built-in “extra” capabilities including
dilution, derivatization, and standard addition –
all without additional hardware or cost.
If you need high throughput and high speed,
the Series 200 is designed for injecting up to
225 samples at rates as fast as two to three
injections per minute from any sample position –
ideal for LC/MS work. The Series 200 even
supports direct injections from microtiter
plates – shallow or deepwell format.
Sample Trays
85-position Sample Tray
Derivatization
Part No.
N2930041
100-position Sample Tray
Part No.
N2931097
80-position Sample Tray
Dilution (with tank).
Includes: N2930044 – 80-position Tray Only
B0505677 – Glass Diluent Tank Only
Part No.
N2930314
205-position Sample Tray
Microvials/10 standard vials.
Part No.
N2930042
225-position Sample Tray
Microvials/high throughput.
Part No.
N2930043
100-position Peltier Tray
Holds 2.0 mL vials. Requires Peltier Controller
(N2930036).
Part No.
N2930035
25-position Sample Tray
Part No.
N2930040
Series 200 Autosampler Trays and Plates
Autosampler
Tray
Part No.
Microtiter Plates Description
Microtiter
Plate
Part No.
Double Shallow Microtiter Plate Tray
(Holds two 96-well plates)
N2930146
96-well Shallow (200 µL)
96-well Mid (500 µL)
96-well Plate Cover/Mat
N9302562
N9302561
N9302563
Double Deep Microtiter Tray
(Holds two 96-well plates)
N2930147
96-well Deep (1mL)
96-well Plate Cover/Mat
N9302560
N9302563
Double Microtiter Peltier Tray
Requires Peltier Controller (N2930036).
(Holds two 96-well plates)
N2930037
96-well Shallow (200 µL)
96-well Mid (500 µL)
96-well Plate Cover/Mat
N9302562
N9302561
N9302563
Peltier Tray for 384-well Microtiter Plates
N2930038
Requires Peltier Controller (N2930036) and
Series 200 Autosampler Firmware 1.08 or higher.
384-well Plate (100 µL)
384-well Plate Cover/Mat
N9302564
N9302565
Tray Description
Series 200 Autosampler Trays for Glass Vials
100-position Peltier Tray and Controller
6 mL
25-sample Tray
6 mL and 2.0 mL
85-sample Tray
2.0 mL
100-sample Tray
0.2 mL
225-sample Tray
2.0 mL
100-sample Peltier Tray
2.0 mL and 0.2 mL
205-sample Tray
2 mL
81-sample Dilution Tray
Peltier Tray for
Microtiter Plates
www.perkinelmer.com/essentials
PerkinElmer has researched, engineered, and
developed the Series 200 Autosampler to ensure
precision, flexibility, reliability, and ease-of-use.
LC-1
Series 200 Autosampler
1.800.561.4646 Canada
www.perkinelmer.com/essentials
LC-2
LC Autosampler Supplies
Autosampler Vials and Caps
PerkinElmer Autosampler vials are guaranteed
for fit and compatibility with the Series 200
Autosampler. Both vials and caps are totally
inert to samples ordinarily analyzed by Liquid
Chromatography.
2.0 mL Analytical Vials,
Caps, and Septa
Vials for Crimp-top
Amber glass standard vials, 2.0 mL, 11 mm o.d. top.
Part No.
N9301385 (pkg.100)
Clear glass standard vials, 2.0 mL, 11 mm o.d. top.
Part No.
N9302680 (pkg.100)
Screw Top Vials Wide Mouth
Type 1 borosilicate standard glass vials, 2.0 mL,
12 x 32 mm.
Part No.
N9306053 (pkg.100 – clear)
Part No.
N9306057 (pkg.100 – amber)
Caps/Septa
Green aluminum crimp-top cap with Teflon®/rubber
septum – for 11 mm vials.
Part No.
N9302684 (pkg.100)
Red aluminum crimp-top cap with Teflon/rubber
septum – for 11 mm vials.
Part No.
N9302685 (pkg.100)
Blue aluminum crimp-top cap with Teflon/rubber
septum – for 11 mm vials.
Part No.
N9302686 (pkg.100)
Silver crimp-top cap with Teflon/rubber septa –
for 11 mm vials.
Part No.
N9306015 (pkg.100)
Screw-top caps with single slit PTFE white silicone septa
for use with 12 x 32 mm screw-top vials (N9306053).
Part No.
N9306052 (pkg.100)
1.800.762.4000 US
Vial, Cap, and Sample Tray Compatibility – Series 200 Autosampler
Volume
Vial Part No.
Cap Part No.
Series 200 Tray
2.0 mL – Screw Top
N9306053
N9306052
81-position
85-position
100-position
100-position Peltier
205-position
2.0 mL – Crimp Top
N9302680
N9301385
N9302684
N9302685
N9302686
N9306015
81-position
85-position
100-position
105-position Peltier
205-position
0.2 mL (Requires N9307027 sleeves)
N9302136
N9302141
205- and 225-position
6.0 mL
N9302134
N9302143
25- and 85-position
0.2 mL Micro Vials, Caps, and Septa Crimpers
Vials
Glass microVials, tapered, 0.2 mL, 8 mm o.d. top.
Part No.
N9302136 (pkg.500)
Caps/Septa
Polyethylene press-on cap for 8 mm o.d. vials.
Part No.
N9302141 (pkg.1000)
Aluminum crimp-top cap with Teflon-lined butyl
rubber septa – for 8 mm vials.
Part No.
03300806 (pkg.1000)
6 mL Vials and Caps
Vials
Glass large-volume vials, 6.0 mL, 20 mm o.d. top.
Part No.
N9302134 (pkg.125)
Teflon autosampler vial sleeve.
Part No.
N9307027
Caps/Septa
Polyethylene press-on cap for 20 mm o.d. vials.
Part No.
N9302143 (pkg.250)
PerkinElmer also provides crimpers for a variety of cap
sizes. Crimp capping is still a preferred method by some
laboratories to ensure sample integrity, particularly
those containing volatile compounds.
Vial Crimper
For 11 mm o.d. top vials.
Part No.
00090699
Bench Top Vial Crimper
Without jaws.
Part No.
N6621006
Bench Top Vial Crimper Jaws
For 20 mm vials.
Part No.
N6621009
Bench Top Vial Crimper Jaws
For 11 mm vials.
Part No.
N6621008
Economy Cap Removal Tool
20 mm
Part No.
N9301270
LC Autosampler Supplies
LC-3
1.800.561.4646 Canada
Spare Parts
Series 200 Autosampler TotalChrom™/
Turbochrom™ BCD Cable
900 Interface.
Part No.
N2930340
Stainless Steel Injector Needle
Part No.
N2930023
Titanium Injector Needle
Part No.
N2930024
Series 200 Autosampler 1022 BCD Cable
REM Box.
Part No.
N2930341
Stainless Steel Sample Holding Loop
Part No.
N2930311
Syringes
Titanium Sample Holding Loop
Part No.
N2930312
Sampling Syringe
50 µL
Part No.
09923304
Teflon® Transfer Line Per Ft
Part No.
02506495
Delrin Nut
1/16 in.
Part No.
Sampling Syringe
100 µL
Part No.
09923305
Needle Cartridge Cap Screw
Part No.
N2931064
Union
1/16 in.
Part No.
09903289
Fingertight Nut
Part No.
09920513 (qty.2)
Note:See the Rheodyne Valve section for injection
valves spares.
09920381
Manual
User’s Manual
Part No.
09938912
Tefzel Union
No nuts or ferrules.
Part No.
09920391
Sampling Syringe
500 µL
Part No.
09923306
Needle Cartridge Casting
Part No.
N2931012
Union Holder Arm
Part No.
N2931081
Tefzel Reverse Ferrule
1/16 in.
Part No.
09920382
Sampling Syringe
250 µL
Part No.
09923270
Needle Cartridge Thumb Screw
Part No.
09920672
Flush Reservoir Filter
40 µm SS
Part No.
09903615
Sampling Syringe
1000 µL
Part No.
09923307
Sampling Syringe
2500 µL (Requires one-time purchase of Kit N2930313.)
Part No.
09923219
Flush Reservoir Filter
40 µm Ti
Part No.
N2600089
Needle Spring
Part No.
09920429
2500 µL Sampling Syringe Kit
Includes: 2500 µL syringe, union, and tubing kit.
Part No.
N2930313
Autosampler Tray and Vial Cross-reference List
Series 200
Tray
Vial
ISS-200
Tray
Vial
ISS-100
Tray
Vial
225-position 0.2 mL
145-position 0.2 mL
100-position 2.0 mL
205-position 2.0 mL and 0.2 mL
100-position 2.0 mL
85-position 6.0 mL and 2.0 mL
100-position 2.0 mL
85-position 6.0 mL and 2.0 mL
85-position
6.0 mL and 2.0 mL
81-position
2.0 mL
25-position
6.0 mL
Integral 4000
Tray
Vial
LC-600
Tray
100-position 2.0 mL
60-position 2.0 mL Crimp Top Only
Vial
42-position 0.8 mL (N9301069)
www.perkinelmer.com/essentials
BCD Cables
LC-4
LC Autosamplers
ISS-200 Autosampler
www.perkinelmer.com/essentials
ISS-200 Sample Trays
100-position Sample Tray
Part No.
B0198017
1.800.762.4000 US
Dosing (Sample) Pump Piston
250 µL
Part No.
B0092468
150-position Sample Tray
Part No.
B0198016
Dosing Pump Piston Seal
250 µL
Part No.
B0133956
ISS-200 Spares
PerkinElmer Injection Valve Assembly
With 150 µL loop.
Part No.
B0185259
Sampling Needle
Part No.
02540582
Dosing Pump
250 µL
Part No.
B0193780
Dosing Pump
1500 µL
Part No.
B0506592
Flush Pump Inlet Check Valve
Part No.
B0105973
Flush Pump Outlet Check Valve
Part No.
B0105974
Flush Pump Piston
Part No.
B0092456
Teflon® Transfer Tube
Part No.
02506495
Tefzel Sample Transfer Tube
For Prep Option Kit.
Part No.
B0121084
Flush Solvent Filter
With Teflon tubing, nuts, and ferrules.
Part No.
B0193766
ISS-200 PerkinElmer
Injector Valve Parts
Needle Guide
Part No.
B0185481
Rotor Seal
Part No.
B0185480
Stator
Part No.
B0162836
Sample Loop
10 µL
Part No.
B0152476
Sample Loop
150 µL
Part No.
B0152473
Sample Loop
2000 µL
Part No.
B0152474
Preparative Option Kit*
Injection volumes of 1 – 1500 µL.
Part No.
B0193796
ISS-200 Manual
Serial Dilution Tank
Part No.
B0505677
User’s Manual
Part No.
B0198180
Flush Pump Piston Seal
Part No.
B0170875
Timed Events PCB
Allows six programmable contact closures.
Part No.
B0185320
Flush Pump Piston Head
Part No.
B0170873
*Also requires purchase of B0184142 Software Option PCB. However,
a single B0184142 can support up to three optional add-ons.
LC Autosamplers
Integral 4000
LC-600 Autosampler
Sampling Needle
For units manufactured before January 1989.
Part No.
02540582
Sample Needle Assembly
Part No.
02540581
Sampling Needle
For units with 42-position tray.
Part No.
02542750
Sampling Needle
For units manufactured after January 1989.
Part No.
02540422
Sampling Needle Teflon® Front Ferrule
for Needle Seal
Part No.
09920123
Sampling Needle Teflon Back Ferrule
for Needle Seal
Part No.
09920124
Sample Syringe
250 µL
Part No.
L5351253
Sample Syringe Teflon Nut
Part No.
04973736
Sample Syringe Teflon Ferrule
Part No.
04973737
Flush Pump Inlet Check Valve
Part No.
B0105973
Polyethylene Tubing
1/16 in., (located between flush pump and
sampling syringe as well as between sampling
syringe and needle).
Part No.
04971726
Flush Pump Outlet Check Valve
Part No.
B0105974
Flush Pump Inlet Check Valve
Part No.
B0105973
Flush Pump Piston Seal
Part No.
B0092449
Flush Pump Outlet Check Valve
Part No.
B0105974
Flush Pump Piston
Part No.
B0092456
Flush Pump Piston
Part No.
B0092456
Dosing (Sample) Pump
Part No.
B0193780
Flush Pump Piston Seal
Part No.
B0170875
Dosing Pump Piston
Part No.
B0092468
Flush Solvent Filter
Part No.
B0049642
Dosing Pump Piston Seal
Part No.
B0133956
Flush Pump Piston Head
Part No.
B0170873
Flush Solvent Filter
Part No.
B0049642
Note: See the Rheodyne Valve section on page LC-48
for injection valves spares.
Long Capillary Transfer Tube, 200 µL
Part No.
B0121084
Tefzel Standard Sample Transfer Tube
Part No.
B0118468
Sampling Needle
For units with 60-position tray.
Part No.
02542651
Note:See the Rheodyne Valve section on page LC-48
for injection valves spares.
www.perkinelmer.com/essentials
ISS-100 Autosampler
LC-5
ISS-100, LC-600 Autosamplers, Integral 4000
1.800.561.4646 Canada
www.perkinelmer.com/essentials
LC-6
HPLC Pumps
Series 200 Pump
1.800.762.4000 US
Normal use of any solvent delivery system eventually
will require that you replace some selected parts.
Refer to the appropriate operator’s manual for the
recommended maintenance schedule. The use of
PerkinElmer replacement parts ensures long and
trouble-free performance of your solvent delivery
system.
Pulse Compensators
Pistons
Series 200 Pump Solvent
Upgrade Kits
The piston is the most critical component of the solvent
delivery system. Exacting specifications are required
to provide precise solvent flow. Both the high and low
pressure pistons are made of sapphire, which has been
chosen for the highest quality hardness and surface
finish in order to prevent seal wear.
Piston Seals
The need to replace piston seals is a natural consequence of routine use. All PerkinElmer pumps contain
a high and low pressure piston seal. In addition to the
standard high pressure seal, which is typically used for
most all applications, we provide extended performance
seals for more specialized requirements. The heavy-duty,
high pressure seal is composed of graphite fiber-filled
Teflon® and is recommended for very high pressure
and high flow rates. The chemically resistant seal is also
composed of a graphite Telfon material. This seal is inert
to an extended range of solvents, such as buffers. It
cannot be used with high flows or pressures in excess of
3000 psi. Whenever replacing the low pressure seal, the
Low Pressure Seal Back-Up Ring should also be replaced.
Check Valves
Check valves allow solvent to flow in only the desired
direction. They should be cleaned or replaced periodically in accordance with a preventative maintenance
schedule. Check valves, which include a sealing washer,
are easy to install using the Torque Wrench kit. For
all PerkinElmer pumps an intermediate check valve
is required. The input check valve, which is identical,
should be ordered.
The pulse compensator combines high-efficiency pulse
smoothing with a low void volume. A Teflon diaphragm
separates a reservoir filled by an RTV elatomer plug.
Normal use will necessitate the eventual replacement
of the diaphragm.
The unique design of the PerkinElmer Series 200 Pump
allows it to easily be upgraded for additional solvent
capability right in your laboratory as your needs change.
Installation of the kit by a PerkinElmer Representative
is recommended but not included. Contact your local
PerkinElmer Representative for more information.
Series 200 Isocratic to Binary Upgrade Kit
Part No.
N2910342
Series 200 Isocratic to Quaternary Upgrade Kit
Part No.
N2910343
Series 200 Binary to Quaternary Upgrade Kit
Part No.
N2910344
Manuals and Accessories
Series 200 Operator’s Manual
Part No.
09938910
Series 200 Pump Injector Bracket
Part No.
N2910349
Pump Backpressure Regulator
To generate backpressure for applications
less than 250 psi.
Part No.
02540272
Pump Priming Syringe
30 mL, plastic.
Part No.
09904849
Pump Priming Syringe
30 mL, glass.
Part No.
00879078
Stainless Steel Mixing Coil Kit
Includes: length of 1/16 in. o.d. x 0.043 in. i.d. stainless
steel tubing with required nuts and ferrules.
Part No.
N2600266
Titanium Mixing Coil Kit
Includes: length of 1/16 in. o.d. x 0.043 in. i.d. titanium
tubing with required nuts and ferrules.
Part No.
N2600274
Narrow Bore Upgrade Kit
For reducing delay volumes.
Part No.
N2600304
Maintenance Kits and Tools
High Pressure Piston Seal Replacement Kit
Includes: four seals, backup rings, and O-Rings.
Part No.
N2910383
Micropump Piston Seal Replacement Kit
Part No.
N2910384
Biocompatible Piston Seal Replacement Kit
Includes: four seals, backup rings, and O-Rings.
Part No.
N2910385
Seal Removal Tool
Part No.
N2601295
Insertion Tool
Part No.
N2601503
Check Valve Torque Wrench
Part No.
02540871
Series 200 Pump Maintenance Kit
Includes: fuses, seals, O-Rings, and seal tools.
Part No.
N2910345
Series 200 Bio LC Pump Maintenance Kit
Includes: fuses, seals, O-Rings, and seal tools.
Part No.
N2910346
Pulse Compensator Repair Kit
Includes: diaphragm, elastomer plug, and seal.
Part No.
N2600313
Diaphragm for Pulse Compensator
Part No.
N2601316
Series 200 Pump
HPLC Pumps
LC-7
Series 200 Pump
1.800.561.4646 Canada
Seals, Pistons, and Check Valves
Micropump
Stainless Steel
(Not Shown)
Part No.
Biocompatible
Titanium
(Not Shown)
Part No.
1
Standard High Pressure Piston Seal (Gold)
High Pressure Piston Seal – Chemically Resistant (Black)
High Pressure Piston Seal – Chemically Resistant (New)
Heavy Duty High Pressure Piston Seal
09907324
09907331
09907345
09907328
09907324
09907338
2
High Pressure Piston Seal Backup Ring
02542076
09923367
02542076
3
High Pressure Piston Seal Backup O-Ring
09902128
09902128
09902018
4
Low Pressure Piston Seal
09907339
09923366
5
Low Pressure Piston Backup Guide Bushing
02542313
6
High Pressure Piston
N2600124
N2910511
N2600124
7
Low Pressure Piston
N2600104
N2910512
N2600104
8
Inlet/Intermediate Check Valve
02540177
02540177
N2600226
9
Outlet Check Valve
02540197
02540197
N2600192
www.perkinelmer.com/essentials
Standard
Stainless Steel
Part No.
09907339
N2601174
Refer to the user’s manual for a complete illustrated parts list.
9
6
2
4
5
3
1
7
8
Exploded view of standard stainless steel pump head.
www.perkinelmer.com/essentials
LC-8
HPLC Pumps
Series 410 Pump
1.800.762.4000 US
Seal Kits
Pulse Compensator Parts
High Pressure Piston Seal Replacement Kit
Includes: four seals, backup rings, and O-Rings.
Part No.
02540275
Pulse Compensator Repair Kit
Includes: diaphragm, elastomer plug, and seal.
Part No.
N2600313
Biocompatible Piston Seal Replacement Kit
Includes: four seals, backup rings, and O-Rings.
Part No.
N2600061
Seals, Pistons, and Check Valves
Manuals and Accessories
Diaphragm for Pulse Compensator
Part No.
N2601316
Standard
Stainless Steel
Part No.
Biocompatible
Titanium
(Not Shown)
Part No.
09907324
09907338
Standard High Pressure Piston Seal (Gold)
High Pressure Piston Seal –
Chemically Resistant (Black)
High Pressure Piston Seal –
Chemically Resistant (New)
Heavy Duty High Pressure Piston Seal
09907345
09907328
2
High Pressure Piston Seal Backup Ring
02542076
02542076
Pump Priming Syringe
30 mL, plastic.
Part No.
09904849
3
High Pressure Piston Seal Backup O-Ring
09902128
09902018
4
Low Pressure Piston Seal
09907339
09907339
5
Low Pressure Piston Backup Guide Bushing
02542313
N2601174
Pump Priming Syringe
30 mL, glass.
Part No.
00879078
6
High Pressure Piston –
units built after December 1989
units built before December 1989
N2600124
02540176
N2600124
02540176
Low Pressure Piston –
units built after December 1989
units built before December 1989
N2600104
02542149
N2600104
02542149
Inlet/Intermediate Check Valve –
units built after March 1, 1987
units built before March 1, 1987
N2600226
N2600191
N2600226
N2600191
Outlet Check Valve
02540197
N2600192
Series 410 Operator’s Manual
Part No.
09937082
1
Pump Backpressure Regulator
To generate backpressure for applications
less than 250 psi.
Part No.
02540272
7
Stainless Steel Mixing Coil Kit
Includes: length of 1/16 in. o.d. x 0.043 in. i.d. stainless
steel tubing with required nuts and ferrules.
Part No.
N2600266
8
Titanium Mixing Coil Kit
Includes: length of 1/16 in. o.d. x 0.043 in. i.d. titanium
tubing with required nuts and ferrules.
Part No.
N2600274
9
09907331
6
Narrow Bore Upgrade Kit
For reducing delay volumes.
Part No.
N2600304
9
Maintenance Tools
2
Seal Removal Tool
Part No.
N2601295
1
4
Insertion Tool
Part No.
N2601503
3
Check Valve Torque Wrench
Part No.
02540871
5
8
Exploded view of pump head.
7
HPLC Pumps
Seal Kits
8
Inlet/Intermediate Check Valve
Part No.
02540177
8
Biocompatible Inlet/Intermediate
Check Valve
For units built before March 1, 1987.
Part No.
N2600191
8
Biocompatible Inlet/Intermediate
Check Valve
For units built after March 1, 1987.
Part No.
N2600226
9
Outlet Check Valve
Part No.
02540197
9
Biocompatible Outlet Check Valve
Part No.
N2600192
Biocompatible Piston Seal Replacement Kit
Includes: four seals, backup rings, and O-Rings.
Part No.
N2600061
Seals
1
1
1
Standard High Pressure Piston Seal (Gold)
Part No.
09907324
High Pressure Piston Seal –
Chemically Resistant (Black)
Part No.
09907331
High Pressure Piston Seal –
Chemically Resistant (New)
Part No.
09907345
1
Heavy Duty High Pressure Piston Seal
Part No.
09907328
2
High Pressure Piston Seal Backup Ring
Part No.
02542076
3
High Pressure Piston Seal Backup O-Ring
Part No.
09902128
4
Low Pressure Piston Seal
Part No.
09907339
5
Low Pressure Piston Backup Guide Bushing
Part No.
02542313
Pistons
6
7
High Pressure Piston
Units built after December 1989.
Part No.
N2600124
Units built before December 1989.
Part No.
02540176
Low Pressure Piston
Units built after December 1989.
Part No.
N2600104
Units built before December 1989.
Part No.
02542149
Pump Priming Syringe
30 mL, glass.
Part No.
00879078
Stainless Steel Mixing Coil Kit
Includes: length of 1/16 in. o.d. x 0.043 in. i.d. stainless
steel tubing with required nuts and ferrules.
Part No.
N2600266
Titanium Mixing Coil Kit
Includes: length of 1/16 in. o.d. x 0.043 in. i.d. titanium
tubing with required nuts and ferrules.
Part No.
N2600274
Narrow Bore Upgrade Kit
For reducing delay volumes.
Part No.
N2600304
Maintenance Kit and Tools
Pulse Compensator Parts
Seal Removal Tool
Part No.
N2601295
Pulse Compensator Repair Kit
Includes: diaphragm, elastomer plug, and seal.
Part No.
N2600313
Insertion Tool
Part No.
N2601503
Check Valve Torque Wrench
Part No.
02540871
Diaphragm for Pulse Compensator
Part No.
N2601316
Model 250 Maintenance Kit
Includes: check valves, seals, and fuses.
Part No.
N2600265
Manuals and Accessories
Model 250 Operator’s Manual
Part No.
09937169
Pulse Compensator Repair Kit
Includes: diaphragm, elastomer plug, and seal.
Part No.
N2600313
Pump Backpressure Regulator
To generate backpressure for applications
less than 250 psi.
Part No.
02540272
Pump Priming Syringe
30 mL, plastic.
Part No.
09904849
9
6
4
5
2
1
3
7
8
Note: Arrange piston seals so that the spring side faces the pump head.
www.perkinelmer.com/essentials
High Pressure Piston Seal Replacement Kit
Includes: four seals, backup rings, and O-Rings.
Part No.
02540275
Check Valves
LC-9
Model 250 Pump
1.800.561.4646 Canada
www.perkinelmer.com/essentials
LC-10
HPLC Pumps
Accessories and Spares For Other Piston Pumps
Piston Seals/O-Rings/Bushings
Check Valves
For use on the Series 4, Integral 4000,
Model 620, and Series 400 pumps.
For use on the Series 4, Integral 4000,
Model 620, and Series 400 pumps.
Standard High Pressure Piston Seal (Gold)
Part No.
09907324
Inlet/Intermediate Check Valve
Part No.
02540177
High Pressure Piston Seal –
Chemically Resistant (Black)
Part No.
09907331
Outlet Check Valve
Part No.
02540197
High Pressure Piston Seal –
Chemically Resistant (New)
Part No.
09907345
Heavy Duty High Pressure Piston Seal
Part No.
09907328
High Pressure Piston Seal Backup Ring
Part No.
02542076
High Pressure Piston Seal Backup O-Ring
Part No.
09902128
Low Pressure Piston Seal
Part No.
09907339
Low Pressure Piston Backup Guide Bushing
Part No.
02542313
Pump Pistons
For use on the Biocompatible Integral 4000
and Model 620 pumps unless otherwise noted.
Inlet/Intermediate Check Valves
Part No.
N2600226
Narrow Bore Upgrade Kit
For Model 620 pumps.
Part No.
N2600304
Series 4 Pulse Compensator Repair Kit
For pulse dampeners containing methanol.
Includes: diaphragm, seals, and O-Rings.
Part No.
02540347
For use on the Integral 4000 and Model 620 pumps.
Pulse Compensator Repair Kit
Includes: diaphragm, elastomer plug, and seal.
Part No.
N2600313
Pump Operators’ Manuals
Low Pressure Piston
Part No.
N2600104
Stainless Steel Mixing Coil Kit
Includes: length of 1/16 in. o.d. x 0.043 in. i.d. stainless
steel tubing with required nuts and ferrules.
Part No.
N2600266
Pulse Compensator
Spares/Rebuild Kits
High Pressure Piston
Part No.
N2600124
Units built before December 1989.
Part No.
02540176
High Pressure Piston
Part No.
N2600124
Pump Priming Syringe
30 mL, glass.
Part No.
00879078
Outlet Check Valve
Part No.
N2600192
For use on the Series 4, Integral 4000,
Model 620, and Series 400 pumps.
For use on the Biocompatible Integral 4000
and Model 620 pumps.
Pump Priming Syringe
30 mL, plastic.
Part No.
09904849
Titanium Mixing Coil Kit
Includes: length of 1/16 in. o.d. x 0.043 in. i.d. titanium
tubing with required nuts and ferrules.
Part No.
N2600274
Diaphragm for Pulse Compensator
Part No.
N2601316
Low Pressure Piston
Part No.
N2600104
Units built before December 1989.
Part No.
02542149
1.800.762.4000 US
Series 200 Operator’s Manual
Part No.
09938910
Pump Maintenance Tools
and Maintenance Kits
For use on the Series 4, Integral 4000, Model 620,
and Series 400 pumps.
Seal Removal Tool
Part No.
N2601295
Insertion Tool
Part No.
N2601503
Check Valve Torque Wrench
Part No.
02540871
Integral 4000 Maintenance Kit
Includes: seals, O-Rings, D2 lamp, test flow cell,
replacement tools, and grease.
Part No.
N2360050
Model 250 Operator’s Manual
Part No.
09937169
Piston Seals Replacement Kits
Series 410 Operator’s Manual
Part No.
09937082
Series 4 Operator’s Manual
Part No.
09939731
Accessories
Pump Backpressure Regulator
To generate backpressure for applications
less than 250 psi.
Part No.
02540272
The following kits include four seals, backup rings, and
O-Rings; and can be used for the Series 4, Integral 4000,
Model 620, and Series 400 pumps.
High Pressure Piston Seal Replacement Kit
Part No.
02540275
Biocompatible Piston Seal Replacement Kit
Part No.
N2600061
HPLC Pumps
ABI 400 Pump
Inlet Check Valve
1/8 in.
Part No.
72000060
Outlet Check Valve
1/8 in.
Part No.
72000062
Piston
Analytical
Part No.
14001970
Working Head
Analytical
Part No.
14001579
Accumulator Head
Analytical
Part No.
14001580
Piston Seal Kit
Analytical, UHMW.
Part No.
72000087
ABI 140A Syringe Pump
Syringe Set
Piston and cylinder, ceramic, 1 x 10 mL (must also order
Type 1 Upgrade kit, one per syringe).
Part No.
06540046
Piston
Ceramic, 10 mL (must also order Type 1 Upgrade kit,
one per syringe).
Part No.
60365000
Piston
SS 316, 10 mL.
Part No.
05550049
Ferrule
1/8 in. SS for Inlet Tubing.
Part No.
09903997
Seal Removal Kit
Part No.
N1001021
Seal Kit, High Pressure
10 mL (Polyethylene).
Part No.
00401577
Seal Kit, High Pressure
10 mL (Polyethylene).
Part No.
00401577
Seal Kit, High Pressure
10 mL (Teflon®).
Part No.
06530069 (pkg.2)
Seal Kit, Low Pressure
10 mL (Polyethylene).
Part No.
00401578
Seal (all) and Tool Kit, Replacement
10 mL, (Polyethylene).
Part No.
06530085
Seal Kit, High Pressure
10 mL (Teflon).
Part No.
06530069 (pkg.2)
ABI 140B Syringe Pump
Seal (all) and Tool Kit
Repl., 10 mL (Polyethylene).
Part No.
06530085
(For pumps with Part Nos. 9111227 and below,
and all alphanumeric Part Nos.):
Syringe Set
Piston and cylinder, ceramic, 1 x 10 mL (must also
order Type 1 Upgrade kit, one per syringe).
Part No.
06540046
ABI 140C Syringe Pump
Piston
Ceramic, 10 mL (must also order Type 1 Upgrade kit,
one per syringe).
Part No.
60365000
Seal
Rear piston.
Part No.
Piston
SS 316, 10 mL
Part No.
05550049
(For pumps with Part Nos. 9111228 and above):
Syringe Set
Piston and cylinder, ceramic, 1 x 10 mL.
Part No.
06540046
Piston
Ceramic, 10 mL (must also order Type 1 Upgrade kit,
one per syringe).
Part No.
60365000
Piston
SS 316, 10 mL.
Part No.
05550049
140C User’s Manual
Part No.
00903078
00200239
Seal
Cylinder head.
Part No.
00200240
Piston Retaining Clip
Part No.
04030126
Tool
Piston removal.
Part No.
03920005
Cylinder Seal Extraction Tool
Part No.
N1001021
Cylinder Seal Insertion Tool I
Part No.
N1001022
75 µL Dynamic Mixer
Part No.
00603861
(For all 140B pumps)
Dynamic Mixer
75 µL volume.
Part No.
05540110
200 µL Dynamic Mixer
140C/140B (for narrowbore columns).
Part No.
29000570
Dynamic Mixer
200 µL volume.
Part No.
29000570
Ferrule
1/8 in. SS (for inlet tubing).
Part No.
09903997
Trim Strip
Part No.
04020041
www.perkinelmer.com/essentials
Purge Valve Assembly
Part No.
29000307
Seal Kit, Low Pressure
10 mL (Polyethylene).
Part No.
00401578
LC-11
Accessories and Spares for ABI Pumps
1.800.561.4646 Canada
LC-12
HPLC Pumps
Solvent Spargers, Filters, and Degassing Systems
www.perkinelmer.com/essentials
On-line Vacuum
Degasser Packages
Extend the performance of your pumps by using a
solvent degassing system. PerkinElmer offers both
traditional helium degassing and now on-line vacuum
degassing accessories to cover your unique degassing
requirements.
3-Channel Vacuum Degassing Package
Includes: a vacuum degasser, one 1 L bottle
with cap, one 2 L bottle with cap, and an
organizer and tray accessory.
Part No.
N2600507
5-Channel Vacuum Degassing Package
Includes: a vacuum degasser , two 1 L bottles
with caps, two 2 L bottles with caps, solvent tray,
and organizer.
Part No.
N2600508
Replacement Vacuum
Degasser Bottles
1 L Glass Bottle
Part No.
N2600497
2 L Glass Bottle
Part No.
N2600498
Helium Degassing Kits
Helium degassing solvent packages are available in a
choice of three solvent configurations. Each kit contains
a manifold, bottles, as well as all required tubing and
fittings. The helium manifold has been designed to
prevent accidental over-pressurization and to eliminate
the possibility of solvent migrating back into the helium
supply lines. The glass bottles supplied with the kits are
specially coated to ensure safety and prevent solvent
leakage if accidentally dropped or otherwise broken.
Isocratic Solvent Package
Includes: one 2 L glass bottle kit, with cap assembly,
and a helium manifold.
Part No.
N2600491
Binary Solvent Package
Includes: one 1 L glass bottle kit and one 2 L glass bottle
kit, with cap assemblies, one helium manifold, and a
solvent organizer accessory.
Part No.
N2600505
Quaternary Solvent Package
Includes: two 1 L glass bottle kits and two 2 L glass
bottle kits, with cap assemblies, one helium manifold,
and a solvent organizer accessory.
Part No.
N2600506
Helium Degassing System Spares
Helium Manifold Kit
5 psi regulator.
Part No.
N2600284
1 L Glass Bottle Kit
Includes: cap assembly, sparger (10 µm), solvent filter
(10 µm), connecting fittings, instructions.
Part No.
N2600456
2 L Glass Bottle Kit
Part No.
N2600457
5 L Glass Bottle Kit
Part No.
N2600458
Bottle Cap Assembly
For 1 L and 2 L glass bottles. Includes: sparger (10 µm),
solvent filter (10 µm), and connecting fittings.
Part No.
N2600495
Bottle Cap Assembly
For 5 L glass bottle.
Part No.
N2600496
1 L Glass Bottle
Part No.
N2600497
2 L Glass Bottle
Part No.
N2600498
5 L Glass Bottle
Part No.
N2600499
Autosampler Flush Bottle Kit
Part No.
N2600459
Degassing Fittings
Tefzel Nut
1/8 in.
Part No.
N2601189
1.800.762.4000 US
Regulator
5 to 180 psi with outlet shut-off valve.
Part No.
00230090
Female Connector
Reduces 1/4 in. to 1/8 in.
Part No.
09903906
Teflon Tubing
Helium and Solvent Supply, per 1 ft. length.
1/8 in. o.d. x .060 in. i.d.
Part No.
02506483
Solvent Spargers
10 µm Solvent Reservoir Sparger
Stainless steel
Part No.
09903610
Titanium
Part No.
N2600070
40 µm Solvent Reservoir Sparger
Stainless steel
Part No.
09903615
Titanium
Part No.
N2600089
Solvent Filters
In-line Solvent Filter System
For stainless steel pumps.
Part No.
09903606
In-line Solvent Filter Replacement Kit
For all stainless steel pumps. Includes two
0.5 µm filter elements and four seals.
Part No.
02540311
In-line Solvent Filter System,Titanium
For Biocompatible pumps.
Part No.
N2600259
Kel-F Ferrule
1/8 in.
Part No.
09903771
Replacement 2 µm Titanium Filter Element
For in-line solvent filter for Biocompatible pumps.
Requires but does not include N2601262.
Part No.
N2601477
Helium Supply Connectors
Replacement Seal for In-line Solvent Filter
For Biocompatible pumps. Use with N2601477.
Part No.
N2601262
Each Solvent Reservoir System requires high-purity
helium, either to pressurize or to degas the solvents.
The helium pressure regulator with shut-off valve can
deliver from 5 to 180 psi of pressure from an external
tank. We offer all the fittings needed to connect
a helium source to your Solvent Reservoir System.
Refer to your operator’s manual for step-by-step
installation instructions.
Solvent Filters
LC Detectors
LC-13
UV/Visible Detector
1.800.561.4646 Canada
SERIES 200 UV/VIS DETECTOR
The proven dual-beam optical design yields high
sensitivity even for difficult ultra-trace analysis,
detecting picogram quantities of many compounds.
Couple that with your choice of either a Deuterium
or Tungsten source for outstanding ultraviolet and
true visible performance anywhere in the detector’s
190-700 nm wavelength range. Lamp changes are
quick and easy due to a unique, self-aligning lamp
mount. Choose from several easily interchangeable
flowcell formats to match your specific analytical
needs – including a flowcell for microbore
applications.
Flexibility and ease-of-use are ensured through an
optimized user interface – including an easy-to-read,
multiline display, tactile keyboard, and contextsensitive function keys. Full wavelength programmability, battery-backed method storage, and linking of
methods allow for automated analysis and method
development activities – all without computer control!
A full suite of user accessible diagnostics allow for quick
troubleshooting in the unlikely event of a problem –
while an integrated leak-detector sounds an audible
alert and halts your analysis if a solvent leak occurs.
When single-point method control of your HPLC system
is required, the Series 200 UV/Vis is fully controllable
via PerkinElmer’s renowned TotalChrom Workstation
and TotalChrom Client/ Server platforms. The Series
200 UV/Vis features full digital output of chromatographic data, so an intermediary analog-to-digital
interface is not required. This simplifies system
installation and operation and reduces benchspace requirements as well.
Description
Part No.
Series 200 UV/Vis Detector,
100/120/220/240 VAC, 50/60 Hz
N2920011
Microbore Flowcell, 6 mm x 2.4 mL
29000544
Standard Flowcell
N2920117
Deuterium Lamp
N2920149
Tungsten Lamp
N2920146
Series 200 UV/Vis Detector
SERIES 200/785A UV/VIS DETECTOR ACCESSORIES
Flowcells/Flowcell Accessories
Adapter, Microbore Head
Part No.
29000152
Flowcell
Microbore (172 System, 6 mm x 2.4 µL), for 785A only.
Part No.
29000197
Flowcell
Standard Analytical (8 mm x 12 µL), for 785A only.
Part No.
29000542
Flowcell Assembly
Microbore (non-172 System, 6 mm x 2.4 µL).
Part No.
29000544
Flowcell Assembly
Prep (3 mm x 1.7 µL).
Part No.
29000545
Reference Aperture
Dry cell.
Part No.
29000078
Flowcell Adapter
For 12 µL flowcell.
Part No.
27000087
Flowcell Adapter
For 2.4 µL flowcell.
Part No.
25000376
Windows
Flowcell, Suprasil (pair).
Part No.
72000008
Manuals/Maintenance
Items/Accessories
Series 200 Manual
Part No.
09936504
785A Manual
User’s Manual.
Part No.
09936189
Backpressure Regulator
Adjustable from 15-59 psi, stainless steel.
Part No.
09907126
Cable Assembly
Detector Signal, for 785A only.
Part No.
60000186
Cable Assembly
Remote Autozero, for 785A only.
Part No.
60000366
Cable
785A to TotalChrom™.
Part No.
09410036
Detector Source Lamps
Deuterium Lamp
Part No.
N2920149
Tungsten Lamp
Part No.
N2920146
Flowcell Bulkhead Union
Part No.
25000323
Heat Exchange Assembly
Part No.
26000050
Deuterium Lamp – N2920149
www.perkinelmer.com/essentials
With over a decade of innovation and outstanding analytical performance to draw
upon, the Series 200 UV/Vis is the successor
to the industry standard UV/Vis detector;
the Model 785A.
LC-14
LC Detectors
Diode Array Detector
www.perkinelmer.com/essentials
SERIES 200 DIODE
ARRAY DETECTOR
Manuals/Maintenance
Items/Accessories
1.800.762.4000 US
Flowcells
LC-135 C/235 C DETECTOR
Standard Flowcell Assembly, Stainless Steel
12.0 µL, 10.0 mm path.
Part No.
N2922028
Manuals/Maintenance
Items/Accessories
Series 200 Diode Array Operator’s Manual
Part No.
09938914
Low Volume Flowcell Assembly, Stainless Steel
5.0 µL, 4.5 mm path.
Part No.
N2922030
Backpressure Regulator
Adjustable from 15-59 psi, stainless steel.
Part No.
09907126
Flowcell Assembly, PEEK
12 µL, 10 mm path.
Part No.
N2922029
Sources/Lamps
Standard Deuterium Lamp (Phase 1)
Part No.
N2922010
Tungsten Source
Part No.
N2922011
Deuterium Lamp (Phase 2)
Part No.
N2922046
Warning
Replacement sources are easy to install and
do not require the assistance of a PerkinElmer
Representative. However, before changing the
detector source, refer to your operator’s manual
for complete replacement instructions and safety
considerations. UV/Vis deuterium lamps are
warranted for at least 500 hours of operation.
LC-135 C/235 C Operator’s Manual
Part No.
09938727
Maintenance Kit
Includes: Test flowcell, D2 lamp, cell lens,
backpressure valve.
Part No.
N2350014
Backpressure Regulator
Adjustable from 15-59 psi, stainless steel.
Part No.
09907126
Sources/Lamp
Deuterium Lamp
Part No.
N2351285
Flowcells
LC-135 C and LC-235 C
Flowcell Assembly
8.0 µL titanium.
Part No.
N2350211
Series 200 Diode Array Detector
LC Detectors
LC-15
Fluorescence and RI Detectors
1.800.561.4646 Canada
LC-240 FL DETECTOR
LC-240 Operator’s Manual
Part No.
L2269065
LC-240 Thermal Printer Paper
Part No.
04973263 (pkg.5)
LC-240 R928 Photomultiplier
Part No.
09972337
Series 200 Fluorescence Detector
Combining Sensitivity
and Specificity
The major benefit afforded by fluorescence detection
is the inherent high sensitivity of the technique coupled
with outstanding specificity – given that relatively few
molecules natively fluoresce. Therefore, the specific
excitation and emission wavelength profile aids in the
characterization of individual components. The Series
200 Fluorescence Detector delivers the outstanding
performance and reliability you’ve come to expect
from PerkinElmer – backed by our unrivaled global
support network.
Advanced Features Set
For Any Application
Standard fluorescence detection is ideal for many
diverse applications, such as the analysis of serum
and plasma in pharmaceutical research, environmental
analysis of toxins and pollutants, vitamin analysis, and
even the analysis of food and beverage degradation
products. The Series 200 includes an advanced set
of features to optimize your analyses no matter
the application:
■ Time Programmable selection of both Excitation,
Emission wavelengths, and autozero give this
detector all the versatility you will need. By choosing
the correct wavelengths, measurements are taken at
the maximum level and both linearity and sensitivity
improve. You can also time program the selective
detection of individual components thereby
minimizing background effects.
■ Spectrum Memory allows you to store up to eight
spectra in non-volatile memory for hardcopy
documentation to a recorder if you choose.
■ Background Subtraction can be programmed to
“automatically” occur and remove gradient effects
on baseline and background fluorescence.
■ Totally Inert Flow Cells provide a flow path of Quartz
and a Fluoro resin that will not affect your results.
■ Stackable,Series 200 Design – the design of the
Series 200 Fluorescence Detector is fully consistent
with the look of the rest of the PerkinElmer Series 200
family – allowing for space-saving, unified systems
stacking. A bright, easy-to-read display makes userinteraction simple.
Series 200 Fluorescence Detector,
100/120/220/240 VAC, 50/60 Hz
Part No.
N2922006
Xenon Lamp
Part No.
N2922082
SERIES 200 RI DETECTOR
Manuals/Maintenance
Items/Accessories
Series 200 Refractive Index Detector
Operator’s Manual
Part No.
09938906
Sources/Lamps
Series 200 RI Tungsten Source
Part No.
02712273
Series 200 Refractive Index Detector
Sources/Lamps
LC-240 Xenon Source Lamp
Part No.
L2251157
Festoon Lamp
Part No.
04969486
Flowcells/Flowcell Accessories
LC-240 Flowcell Assembly
4.0 µL
Part No.
L2265120
LC-240 Square Fused-silica Flowcell
1.5 mm
Part No.
L2261145
LC-240 Square Fused-silica Flowcell
1.0 mm
Part No.
L2261065
www.perkinelmer.com/essentials
Manuals/Maintenance
Items/Accessories
www.perkinelmer.com/essentials
LC-16
LC Detectors
LC Column Ovens and Other Accessories
Series 200 Peltier Column Ovens
Maintenance Items/Accessories
In many HPLC analyses, variations in column temperature can cause significant changes in retention times,
making qualitative analysis difficult and affecting the
precision of quantitative measurements.
LC-235 and Integral 4000 Test
Flowcell Assembly
Part No.
N2350118
The Series 200 Peltier LC Column Oven controls the
mobile phase and sample temperature before they
enter the column with a built-in preheater. This
eliminates thermal gradients across the column,
resulting in better column performance and improved
retention time precision.
The Series 200 Peltier LC Column Oven is designed to
meet even the most demanding requirements. Microprocessor based control maintains the set temperature,
with 0.2º C stability, across the entire 4º to 90º C temperature range. The LED display continuously shows
the current “actual” temperature and the user-selected
“set” temperature. The unique, easily accessed column
compartment can accommodate up to three columns,
including 30 cm columns such as those used in GPC
analyses. The design of the column compartment also
reduces tubing lengths, thus minimizing delay times
and band-broadening effects.
Because the column chamber is easily accessed directly
from the front of the unit without having to remove a
cover, it may be stacked with other instruments, such
as the Series 200 pumps, autosamplers, and detectors.
Series 200 Peltier Column Oven
Part No.
N2601580
Series 200 Heat Only Oven
Part No.
N2601581
LC-235 Maintenance Kit
Includes: Test flowcell, D2 lamp, cell lens,
and backpressure valve.
Part No.
N2350014
Backpressure Regulator
Adjustable from 15-59 psi, stainless steel.
Part No.
09907126
Lamps and Sources
1.800.762.4000 US
Flowcells/RI Prisms
(PerkinElmer Detectors)
Many of PerkinElmer’s LC detectors feature multiple
flowcells to meet a range of analytical needs from
microbore to prep. The options are listed below with
important characteristics such as cell volume and
pathlength.
The LC-95, LC-135/235, and LC-480 detectors feature
a self-aligning cartridge design which allows you
to quickly and easily exchange or rebuild the flowcell.
LC-95 Flowcell Assembly
4.5 µL stainless steel.
Part No.
02710098
LC-135/235 and Integral 4000 Deuterium Lamp
Part No.
N2351125
LC-295 Biocompatible Flowcell
PEEK, 8 µL, 10 mm path.
Part No.
02711763
Alternate Deuterium Lamp for LC-75/85B/
95/135/235 and Integral 4000
Part No.
N2351285
LC-295 Preparative Flowcell
Stainless steel, 100 mL/min, 1 mm path.
Part No.
02711797
LC-95 UV/Visible Detector Standard
Deuterium Lamp
Also compatible with the LC-75 and LC-85B.
Part No.
02711340
LC-295 Micro Flowcell
Stainless steel, 1.3 µL, 2.5 mm path.
Part No.
02712231
LC-295 Deuterium Lamp
Part No.
02712266
LC-90 and LC-290 Detector
Deuterium Lamp
Part No.
02712224
LC-480 Photo Diode Array Detector
Deuterium Lamp
Part No.
B0160917
LC-30 RI Source Lamp
Part No.
02712155
LC-25 RI Source Lamp
Part No.
02711560
LC-480 Flowcell Assembly
18 µL
Part No.
B0173402
Operator’s Manuals
LC-135/235 Operator’s Manual
Part No.
09937220
LC-90 Operator’s Manual
Part No.
09937083
LC Detectors
ABI 759A UV/Vis Detectors
09936189
Deuterium Lamp
Part No.
N2920149
Tungsten Lamp
Part No.
N2920146
Adapter
Microbore Head.
Part No.
29000152
Flowcell
Microbore (172 System, 6 mm x 2.4 µL).
Part No.
29000197
Flowcell
Standard Analytical (8 mm x 12 µL).
Part No.
29000542
Flowcell Assembly
Microbore (non-172 System, 6 mm x 2.4 µL).
Part No.
29000544
Flowcell Assembly
Prep (3 mm x 1.7 µL).
Part No.
29000545
Reference Aperture
Dry Cell.
Part No.
29000078
Flowcell Adapter
For 12 µL flowcell.
Part No.
27000087
Flowcell Adapter
For 2.4 µL flowcell.
Part No.
25000376
Windows
Flowcell, Suprasil (pair).
Part No.
72000008
Cable Assembly
Remote Autozero.
Part No.
60000366
Backpressure Regulator
Part No.
09907126
ABI 757 UV/Vis Detector
Deuterium Lamp
Part No.
N2920149
Deuterium Lamp – N2920149
Tungsten Lamp
Part No.
N2920146
Lamp Holder Adapter
Part No.
29000286
Flowcell
Conventional LC, 12 µL vol., 8 mm path.
Part No.
29000146
Flowcell
High pressure, conventional LC, 12 µL vol.,
8 mm path.
Part No.
29000324
Dry Cell Aperture
Part No.
29000078
Flowcell Adapter
SS, for 12 µL flowcell.
Part No.
27000087
Flowcell Adapter
SS, for 0.5 and 2.4 µL flowcell.
Part No.
25000376
Microbore Adapter Attachment
Model 172 style.
Part No.
29000152
Flowcell Exit Tubing
No fittings.
Part No.
25000536
ABI 773 UV/Vis Detector
User’s Manual
Part No.
10000079
Deuterium Lamp
Part No.
N2920149
Tungsten Lamp
Part No.
N2920146
Flowcell
Conventional LC, 12 µL vol., 8 mm path.
Part No.
29000072
Flowcell
Micro or Fast LC, 2.4 µL vol., 6 mm path.
Part No.
29000197
Dry Cell Aperture
Part No.
29000078
Flowcell Adapter
SS, for 12 µL flowcell.
Part No.
27000087
Flowcell Adapter
SS, for 0.5 and 2.4 µL flowcell.
Part No.
25000376
Bulkhead Union
Part No.
25000323
Flowcell Bulkhead Union
Part No.
25000323
Bulkhead Union
Flowcell
Part No.
25000323
Detector Signal Cable
Part No.
60000186
Heat Exchange Assembly
Part No.
26000050
Detector Signal Cable
Part No.
60000186
Flowcell Windows
Suprasil II (Pair).
Part No.
72000008
Cable Assembly
Detector Signal.
Part No.
60000186
Flowcell Windows
Suprasil II (Pair).
Part No.
72000008
www.perkinelmer.com/essentials
Manual
User’s 785A.
Part No.
LC-17
Accessories and Spares for ABI Detectors
1.800.561.4646 Canada
www.perkinelmer.com/essentials
LC-18
LC Detectors
Accessories and Spares for ABI Detectors
1.800.762.4000 US
ABI 783(A) UV/Vis Detector
ABI 1000S Diode Array Detector
ABI Detector Accessories
Deuterium Lamp
Part No.
29000484
Deuterium Lamp
Part No.
29000416
Valco Bulkhead Union
Part No.
25000323
Tungsten Lamp
Part No.
24500213
Tungsten Lamp
Part No.
24500210
Suprasil II Flowcell Windows
Pair
Part No.
72000008
Lamp Holder Adapter
Part No.
29000286
Flowcell Adapter
SS, for 6 µL flowcell.
Part No.
27000087
Flowcell
Conventional LC, 12 µL vol., 8 mm path.
Part No.
29000146
Flowcell Adapter
SS, for 3.3 µL flowcell.
Part No.
25000376
Flowcell
High pressure, conventional LC.
Part No.
29000324
High Resolution Board Upgrade
Part No.
29000493
Dry Cell Aperture
Part No.
29000078
Parallel Printer Cable
Part No.
60000542
Flowcell Adapter
SS, for 12 µL flowcell.
Part No.
27000087
Detector Signal Cable
Part No.
60000186
Flowcell Adapter
SS, for 0.5 and 2.4 µL flowcell.
Part No.
25000376
Microbore Adapter Attachment
Model 172 style.
Part No.
29000152
Bulkhead Union, Flowcell
Part No.
25000323
Detector Signal Cable
Part No.
60000186
Autozero and Remote Event
Mark Cable
Part No.
60000366
Flowcell Windows
Suprasil II (Pair).
Part No.
72000008
Flowcell Windows
Suprasil II (Pair).
Part No.
72000008
ABI 980 Fluorescence Detector
Deuterium Lamp
Part No.
29000484
Tungsten Lamp
Part No.
24500213
Lamp Holder Adapter
Part No.
29000286
(Emission Bandpass Filters are 25 nm bandwidth filters.)
Emission Bandpass Filter
450 nm
Part No.
27000098
Emission Bandpass Filter
475 nm
Part No.
27000099
Detector Signal Cable
Part No.
60000186
Detector Signal Cable
6 ft.
Part No.
60000186
Autozero and Remote Event Mark Cable
Part No.
60000366
Autozero
Remote event mark, load, and abort cable.
Part No.
60000394
Relay Outputs Access Cable
Part No.
60000393
TotalChrom™ Chromatography Data Handling Systems
LC-19
1.800.561.4646 Canada
www.perkinelmer.com/essentials
PerkinElmer’s TotalChrom Chromatography Data
System is designed to provide laboratories with
the total answer to chromatography data handling needs. TotalChrom is an improved and
enhanced version of the software previously
released as Turbochrom™.
When configured with a PerkinElmer AutoSystem™ XL
Gas Chromatograph or a PerkinElmer Series 200 Liquid
Chromatograph, the TotalChrom Workstation (TCWS)
Data System is the controller and data manager for the
overall system. TotalChrom Workstation systems can
also control selected instruments from other vendors
and can acquire data from any chromatographic system.
TotalChrom Navigator Screen
The TotalChrom Client/Server (TC C/S) Data System
provides the same features as the Workstation system
in a multi-user environment. TC C/S systems can easily
integrate all existing chromatographs into a single
networked system supporting an unlimited number
of users and an unlimited number of chromatographs.
Coupled with the new Oracle based TC Database,
which offers file storage and query capability,
TotalChrom C/S is a complete data system to
handle all laboratory needs.
New features of TotalChrom 6.2 include TCPublisher®,
the most powerful chromatography reporting tool
available, and additional features to aid in compliance
with 21 CFR Part 11 regulations. TCPublisher allows
automatic generation of an endless variety of reports.
TCPublisher supports single injection reports, dual
column reports, and summary reports. Default reports,
are supplied as examples and a sophisticated layout
tool is provided to modify existing report designs or
to design new ones. Reports easily integrate text,
data, and graphics. Separate text tables can be used
for each different sample type and each table can select
independent peaks, data, and calculations.
TCPublisher Replicate
Injections Report
TCPublisher Dual
Channel Report
TCPublisher Single
Injection Report
LC-20
TotalChrom™ Chromatography Data Handling Systems
TotalChrom Workstation
www.perkinelmer.com/essentials
TotalChrom Workstation Software
TotalChrom Workstation Single Instrument
Software Kit
Part No.
N5150101
TotalChrom Workstation Dual Instrument
Software Kit*
Part No.
N5150102
TotalChrom Workstation Multi-instrument
Software Kit*
Part No.
N5150103
TotalChrom Workstation Reprocess Only
Software Kit
Part No.
N5150100
TotalChrom Workstation Manuals
TotalChrom Workstation Manual Set
Complete manual set including User’s Guide (volumes
1 and 2), Application Manager’s Guide and Tutorial.
Part No.
N5150512
TotalChrom Workstation User’s Guide
(Volumes 1 and 2)
User’s Manual covering instrument configuration and
basic operation of TotalChrom Workstation software.
Part No.
N5150518
TotalChrom Workstation Application
Manager’s Guide
Application Manager’s Guide covering installation
and system management of TotalChrom Workstation
software.
Part No.
N5156025
TotalChrom Tutorial
Software tutorial that teaches basic data acquisition,
method development, optimization techniques,
sequence development, and calibration.
Part No.
N5156021
TotalChrom Workstation IQ/OQ Manual
Includes TotalChrom IQ/OQ documentation set. Set
includes both hard copy and electronic documentation.
Consult with your local service administrator for
availability of additional services such as IQ/OQ
Installation.
Part No.
N5150519
1.800.762.4000 US
TotalChrom Workstation SI/DI
Upgrade Kits
Version Upgrades to TotalChrom
Workstation Software
TotalChrom Workstation Single Instrument
to Dual Instrument Upgrade Kit*
Upgrades existing TotalChrom Workstation Single
Instrument System to Dual Instrument System
capability. Also compatible with Turbochrom™
Workstation v.6 data systems.
Part No.
N5150112
Turbochrom Professional v.4.x Single Instrument
Migration to TotalChrom Workstation Single
Instrument Software
Part No.
N5150341
TotalChrom Workstation Single-instrument
to Multi-instrument Upgrade Kit*
Upgrades existing TotalChrom Workstation Singleinstrument System to Multi-instrument System
capability. Also includes one Reprocess Only license.
Also compatible with Turbochrom Workstation v.6
data systems.
Part No.
N5150113
TotalChrom Workstation Dual-instrument
to Multi-instrument Upgrade Kit*
Upgrades existing TotalChrom Dual-instrument
Software to Multi-instrument version. Also includes
one Reprocess Only license. Also compatible with
Turbochrom Workstation v.6 data systems.
Part No.
N5150114
*If no IEEE-488 board (Part No. S2700402), NCI, or terminal server
exists in the current system configuration, it will be necessary to
purchase one or more of these parts for additional instrument
connectivity.
TotalChrom Optional Software
System Suitability Software for TotalChrom
and Turbochrom Workstation Software
Part No.
N5150180
CONNECT for TotalChrom and Turbochrom
Workstation Software
Part No.
N5150182
Size Exclusion Software (TurboSEC) for
TotalChrom and Turbochrom Software
Part No.
N5150183
TurboScan200 Spectral Processing Software
for TotalChrom Workstation
Part No.
S2700055
Turbo Methods Development Software
for TotalChrom Workstation
Part No.
S2701021
Turbochrom Professional v.4.x Dual Instrument
Migration to TotalChrom Workstation Dual
Instrument Software
Part No.
N5150342
Turbochrom Professional v.4.x Multi-instrument
Migration to TotalChrom Workstation Multiinstrument Software
For users who have purchased TC Pro prior to 7/28/97.
Part No.
N5150343
Turbochrom Professional v.4.x RPO Migration
to TotalChrom Workstation RPO Software
Part No.
N5150340
Turbochrom Workstation v.6.x to TotalChrom
Workstation v.6.2 Software
Part No.
N5150349
TurboScan (Turbochrom 4) Upgrade to
TurboScan200 for TotalChrom Workstation
Upgrades TurboScan for TC Pro to TurboScan200
for TotalChrom Workstation. Also compatible with
Turbochrom v.6.1 or greater Workstation systems.
Part No.
S2700056
Turbo Methods Development Software Upgrade
for TotalChrom Workstation
Upgrades Turbo Methods Development (TMD) Software
for TC Pro to TMD for TotalChrom Workstation. Also
compatible with Turbochrom v.6.1 and higher
Workstation systems.
Part No.
04308554
TotalChrom™ Chromatography Data Handling Systems
LC-21
TotalChrom Turnkey
1.800.561.4646 Canada
TotalChrom Turnkey LC
(Requires, but does not include,
three 240-volt power cords.)
TotalChrom Turnkey 901
TotalChrom Turnkey 902
TotalChrom Turnkey consists of TotalChrom Workstation
Single Instrument software preinstalled on a Dell computer. This is a single-channel, analog detector solution
that allows TotalChrom to acquire, report, and store any
vendor’s chromatographic data. The computer comes
with network capability and memory expansion slots. It
does not include a sound card. TotalChrom Workstation
Single Instrument Software, System Suitability Software,
and IVM Software will be preinstalled. Includes User’s
and Application Manager’s Guides, Tutorial, NCI 901
A/D Intelligent Interface, and PC to NCI serial cable.
May require, but does not include, analog, BCD,
Ready/Run, and Start/Stop cables.
Part No.
N5150614 (120 V)
Part No.
N5150615 (240 V)
TotalChrom Turnkey consists of TotalChrom Workstation
Single Instrument software preinstalled on a Dell computer. This is a dual-channel, analog detector solution
that allows TotalChrom to acquire, report, and store any
vendor’s chromatographic data. The computer comes
with network capability and memory expansion slots. It
does not include a sound card. TotalChrom Workstation
Single Instrument Software, System Suitability Software,
and IVM Software will be preinstalled. Includes User’s
and Application Manager’s Guides, Tutorial, NCI 902
A/D Intelligent Interface, and PC to NCI serial cable.
May require, but does not include, analog, BCD,
Ready/Run, and Start/Stop cables.
Part No.
N5150616 (120 V)
Part No.
N5150617 (240 V)
(Requires, but does not include,
three 240-volt power cords.)
(Requires, but does not include,
three 240-volt power cords.)
www.perkinelmer.com/essentials
TotalChrom Turnkey consists of TotalChrom Workstation
Single Instrument software preinstalled on a Dell computer. It includes everything needed to control, acquire,
report, and store data from PerkinElmer Series 200 LC
pumps, detectors, and autosamplers. Additional
PerkinElmer modules are also supported but may
require the purchase of additional cables. For other
instrumentation contact your local sales representative.
The computer comes with network capability and
memory expansion slots. It does not include a sound
card. TotalChrom Workstation Single Instrument
Software, System Suitability Software, IVM Software,
and appropriate instrument IPM License PAKs will
be preinstalled. Includes PerkinElmer LC IPM, User’s,
and Application Manager’s Guides, Tutorial, 610 LINK,
serial cable, and appropriate instrument cables
for connectivity. May require, but does not include,
analog, BCD, Ready/Run, and Start/Stop cables.
Not recommended for Series 200 Diode Arraybased systems.
Part No.
N5150612 (120 V)
Part No.
N5150613 (240 V)
Intelligent Interfaces for TotalChrom™
www.perkinelmer.com/essentials
LC-22
1.800.762.4000 US
All TotalChrom systems utilize PerkinElmer Intelligent
Interfaces to connect each chromatography system
to the data system PC. Each interface contains buffered
RAM memory to maintain data collection in the event
that the PC or PC network becomes inoperative during
data acquisition. Data from instruments is never lost
and chromatograph productivity is preserved.
Analog chromatographs connect to TotalChrom
through NCI (Network Chromatography Interface)
Series Intelligent Interfaces. The model NCI 901
is a single-channel device, while the model NCI 902
is a dual-channel device. Both interface models are
capable of taking analog detector data (unipolar
or bipolar) at sampling rates from 0.1 to 100 Hz.
Digital chromatographs connect to TotalChrom through
the Model 600 Series LINK Intelligent Interfaces. Multiple
instruments can be connected to each LINK interface via
the four serial ports included on each interface. Each
port is capable of receiving signals from two detectors
per chromatograph. In addition to collecting digital
detector data, LINK interfaces also provide instrument
control capability.
For TotalChrom Workstation and TotalChrom C/S,
Intelligent Interfaces may be connected to a PC via
either IEEE-488 cabling, a PC com (serial) port, or
a Terminal Server. Com Port and Terminal Servers
utilize serial cabling.
Series 900A Interface Connector Clips
Spare kit of model 950A, 970A, and 941A Interface
analog connector clips.
Part No.
S9000402
TotalChrom™ Workstation Model 520
IVM Software
Allows user to test any NCI Series and M900A Series
Intelligent Interfaces to validate interface operations
(linearity, reproducibility, etc.). Contains special
TotalChrom interface test methods and automated
validation logs to maintain results of interface tests in
software. Requires, but does not include, a Model 520
Interface Validation Module.
Part No.
N5150181
Interface Personality
Modules (IPM)
IPMs are instrument-specific software programs that
interpret and translate instrument control and data
acquisition parameters between TotalChrom and a
specific digital instrument. IPMs are downloaded from
the host PC (TotalChrom) by a configuration function
to a specific serial port on a Model 600 LINK interface.
Downloaded IPMs are stored in nonvolatile memory
in the LINK interface. Each IPM can be configured
to any port or ports on any LINK interface connected
to the TotalChrom acquisition PC. Each TotalChrom
system (except Turbochrom EL) can support up to a
maximum of eight instruments connected via Model
900 Series, NCI Series, Interfaces, and/or Model 600
LINK Series interfaces.
IPM For Agilent 1100 HPLC
Provides control for the Agilent series 1100 HPLC
modules. Each LINK Interface (M610 only) can accommodate one HPLC instrument system. Requires but does
not include serial communication cable for each Agilent
1100 module controlled by TotalChrom.
Part No.
N5150167 for TotalChrom Workstation
Part No.
N5150267 for TotalChrom Client Server
IPM for PerkinElmer LC Systems
Provides complete control of PerkinElmer HPLC pumps,
random access autosampler, diode array detectors
(S200 and LC-235C), dual channel UV detector (LC-135C),
and programmable UV/Vis detectors (S200 and LC-785A)*
with simultaneous digital data acquisition from two
channels per detector. This IPM may be configured
across one or more 600 Series LINK interface(s) on
a single TotalChrom acquisition system. Each LINK
interface can accommodate one HPLC instrument
system. Requires, but does not include, one Turbo
LC Plus Communications Kit for each LC module
controlled by TotalChrom Workstation. Also compatible with Turbochrom Workstation v.6 data systems.
Part No.
N5150162 for TotalChrom Workstation
Part No.
N5150262 for TotalChrom Client Server
*Series 200 UV/Vis detector requires TotalChrom or Turbochrom
Workstation v 6.1.2 or higher.
M600 Series LINK and NCI Series Interfaces
Model
Memory
Recommended Applications
Voltage
Part No.
Series 900 Interface Connector Clips
Spare kit of model 950, 960, 970, and 941 Interface
analog connector clips.
Part No.
85090101
Model 600 LINK
256 KB
1 LC System
Model 610 LINK
1 MB
1 LC System
NCI Series Interface Connector Clips
Spare kit of NCI 901/902 Interface connector clips.
Part No.
S9000405
Integral LINK
256 KB
Add-on Kit (brown)
Integral LINK
256 KB
Add-on Kit (white)
NCI 901
256 KB
120
240
120
240
N/A
90060001
S9000018
90061001
S9000019
N6120066
N/A
N6120180
120
240
120
240
S9000070
S9000075*
S9000090
S9000095*
Interface Validation
Modules (IVM)
Model 520 Interface Validation Module, 120 V
The Model 520 IVM is a calibrated analog peak pattern
generator for use in testing/validating analog to digital
converters such as the NCI 901/902 and the Series
900/900A Intelligent Interfaces. The module generates
eight possible analog patterns at selectable voltage
ranges of 0-.1, 0-1, 0-2, and 0-10 volts. Factory calibration is traceable to a NIST standard volt. Includes
remote start/stop cable and analog signal cable for
connection to PerkinElmer NCI/900/900A Series
Intelligent Interfaces. Includes one-year return
to Service Depot warranty.
Part No.
S9000160 (120 V)
Part No.
S9000165 (240 V)
NCI 902
256 KB
AutoSystem™ GC
AutoSystem XL GC
AutoSystem GC
AutoSystem XL GC
Single Inst./Single Detector
GC, LC, IC, or CE use
Single Inst./Dual Detector
GC, LC, IC, or CE use
*Select appropriate power cord (No Charge) from list below. All 120 V interfaces include USA power cord. Canada, Japan, Taiwan, Puerto Rico,
Bahamas, and most Latin American countries use 120 V interface version.
Power Cords – 240 V (No Charge When Ordered with 240 V Interface)
Country
Part No.
UK, Cyprus, Nigeria, Zimbabwe, Singapore, Malaysia, Zambia
Australia, New Zealand
Europe, Saudi Arabia, Egypt, South Africa, India, Thailand, China
Denmark, Greenland
Switzerland, Liechtenstein
09991414
09991417
09991415
09991416
09991413
Cables
LC-23
1.800.561.4646 Canada
Serial Cables* for Instrument to M600 LINK Interface
IEEE Cables (All TC Versions)
Part No.
1m
2m
4m
8m
65105001
65105102
65105204
65105408
Description
Part No.
Agilent 1100 HPLC to M600/M610 LINK, 10 ft.
S5010015
Agilent 1100 HPLC to M600/M610 LINK, 25 ft.
S5010016
M900/960/970 Series Interface to M600/M610 LINK, 6 ft. (not for M941)
S5010013
IEEE Cable Connector Extender
Extender attachment for use on computers where the
PC case interferes with connection of the IEEE cable.
Attaches to the IEEE board connector on back of PC case.
Part No.
09997196
NCI Series Interface to M600/M610 LINK, 6 ft.
S5010041
PerkinElmer ISS 200 Autosampler to M610 LINK, 6 ft.
09410015
PerkinElmer Series 200 Autosampler to M610 LINK, 6 ft.
N2930343
PerkinElmer Model 250 Pump, Series 410 Pump to M610 LINK, 6 ft.
09410015
TotalChrom WS and C/S Serial Cables to Lantronix
Terminal Server for M950/970 Interfaces
PerkinElmer LC 235C Diode Array Detector to M610 LINK, 6 ft.
09410015
PerkinElmer Series 200 Pump to M610 LINK, 6 ft.
09410020
Cable Length
Part No.
PerkinElmer Series 200 Diode Array Detector to M610 LINK, 6 ft.
N2922013
7 ft.
25 ft.
50 ft.
100 ft.
S5010017
S5010018
S5010019
S5010020
PerkinElmer Model 785A UV/Vis Detector to M610 LINK, 6 ft.
09410036
PerkinElmer Series 200 UV/Vis Detector to M610 LINK, 6 ft.
N2930343
TotalChrom WS and C/S Serial Cables to Lantronix
Terminal Server for M941/M600 LINK Interfaces
Cable Length
Part No.
7 ft.
25 ft.
50 ft.
100 ft.
S5010021
S5010022
S5010023
S5010024
TotalChrom WS and C/S Serial Cables to Lantronix
Terminal Server for NCI Interfaces
Cable Length
Part No.
7 ft.
25 ft.
50 ft.
100 ft.
S5010037
S5010038
S5010039
S5010040
TotalChrom WS and C/S Serial Cables to PC
for M941 A and M600/610 Link Interfaces
Cable Length
Part No.
7 ft.
25 ft.
50 ft.
100 ft.
S5010025
S5010030
S5010031
S5010032
TotalChrom WS and C/S Serial Cables to PC
for NCI Interfaces
Cable Length
Part No.
7 ft.
25 ft.
50 ft.
100 ft.
S5010033
S5010034
S5010035
S5010036
*Special serial cards, instrument communication kits, and IPM software may be required to complete interfacing of a LINK interface
to a digital chromatograph. Please contact your local PerkinElmer Sales Representative for details.
M900 Series BCD Cables for Autosamplers
Description
Part No.
Varian 8000* Autosampler
65204101
Waters WISP Autosampler
65204001
PerkinElmer ISS 200 Autosampler
S5010002
PerkinElmer S200 Autosampler
N2930340
*Autosampler must be equipped with BCD option.
www.perkinelmer.com/essentials
Cable Length
LC-24
HPLC Columns
Brownlee™ Columns
www.perkinelmer.com/essentials
Modes of Separation
Reversed-phase chromatography (RPC) is the most
popular HPLC mode and is used in 60-80% of all applications. In RPC, hydrophobic groups (C18, C8, or C4)
bonded to a silica support are used together with
a mobile phase of water and organic solvent
(e.g. methanol, acetonitrile).
Polar phase (normal phase) chromatography
(NPC) uses a polar stationary phase (unbonded silica,
bonded amino or cyano group) together with a nonpolar mobile phase (e.g., hexane). NPC is useful for
functional group analysis, isomeric separations,
purification of organics, and sample cleanup.
Ion-exchange chromatography (IEC) utilizes bonded
ionic groups to separate ionic analytes. Retention is
based on the affinity of various analyte ions for the
stationary phase and various mobile phase parameters
(e.g., pH, ionic strength).
Brownlee Sorbents
Brownlee offers a wide selection of sorbents based
on both silica and polymer supports.
Aquapore® is a wide-pore (300 Å, 7, and 20 µm),
silica-based support suitable for the separation
of large biopolymers.
Spheri-5® is a small-pore (80 Å, 5 µm), silicabased sorbent for separating small molecules. Both
monofunctional (comb-type) and polyfunctional
(polymerized loop-type) C8 and C18 sorbents are
available.
1.800.762.4000 US
Analytical Cartridges
for Conventional
and Narrowbore HPLC*
– Economical: Cartridges are less expensive than
conventional columns. Solvent consumption
reduced by using narrowbore or shorter columns.
■ Experience: 25 years of manufacturing experience
since Bob Brownlee introduced the first finger-tight
cartridge system in 1977.
■ Analytical cartridges from the traditional Brownlee line
are available in three lengths (30, 100, and 220 mm),
and two internal diameters (4.6 and 2.1 mm). The
MPLC cartridge system allows direct coupling of
a cartridge to a guard without any dead volume.
Changing cartridges is easy with the finger-tight
cartridge design which does not require any wrenchtightening of the holder or disconnecting of tubing
from the LC system. A specific cartridge holder is
required for each cartridge length. Additional
information on MPLC holders can be found on page
LC-33. Pressure ratings are 7,000 psi for silica-based
columns.
– Quality: Columns are manufactured under stringent
ISO-9001 certified quality control standards.
Individual test chromatograms are included with
each 100 mm and 220 mm cartridge.
– Flexible: Same reusable holder for 4.6 and
2.1 mm i.d. cartridges. Compatible with all HPLC
instruments. Choice of different cartridge lengths
to enhance speed or resolution.
*Microbore, semi-preparative and conventional MPLC columns
found on pages LC-31 and LC-34.
Brownlee Columns and Holders
Specifications
SPHERI-5® IS A SPHERICAL 5 µm SILICA-BASED SUPPORT FOR SEPARATING SMALL MOLECULES.
Product
Pore
Diameter
Functionality
Surface
Area (M2/G)
%
Carbon
End
Cap
Spheri-5, RP-8
Octyl (C8) monofunctional
80 Å
180
6%
Yes
Spheri-5, RP-18
Octadecyl (C18) monofunctional
80 Å
180
11%
Yes
Spheri-5, ODS
Octadecyl (C18) polyfunctional
80 Å
180
14%
Yes
Polypore® is a polymer-based (microporous, 10 µm)
sorbent for the analysis of organic acid and sugars.
Spheri-5, Phenyl
Phenyl
80 Å
180
6%
Yes
Spheri-5, Silica
Hydroxyl
80 Å
180
N/A
N/A
Validated™ is a small-pore (100 Å, 5 µm) silica-based
C18 sorbent for small molecules, specifically for
consistent pharmaceutical assays.
Spheri-5, Amino
Aminopropyl
80 Å
180
3%
No
Spheri-5, Cyano
Cyanopropyl
80 Å
180
4%
No
Pecosphere™ is a small-pore (80 Å, 3, 5, and 10 µm)
silica-based sorbent for HPLC of small molecules.
AQUAPORE® IS A SPHERICAL 7 µm SILICA-BASED SUPPORT FOR BIOSEPARATIONS.
Reduced Activity is a small-pore, base-deactivated
(100 Å, 3, and 5 µm) silica-based, reversed-phase
sorbent (C18 or C8) developed for HPLC of basic analytes
and pharmaceuticals.
Product
Surface
Area (M2/G)
%
Carbon
End
Cap
CHOICE™ is a small-pore, base-deactivated (100 Å,
3 µm C18) silica-based, reversed-phase sorbent (C18)
developed for LC/MS separations.
Pore
Diameter
Functionality
Aquapore ODS OD-300
Octadecyl (C18)
300 Å
100
10%
Yes
Aquapore Octyl, RP-300
Octyl (C8)
300 Å
100
5%
Yes
Aquapore Butyl, BU-300
Butyl (C4)
300 Å
100
3%
Yes
Aquapore weak anion, AX-300
Polyethyleneimine
300 Å
100
N/A
N/A
POLYPORE® IS A SPHERICAL 10 µm POLYMER-BASED SUPPORT FOR BIOSEPARATIONS.
Product
Functionality
Pore Diameter
Polypore H for organic acid separation
Hydrogen form
Microporous
Polypore CA for sugar separation
Calcium form
Microporous
Note:Maximum pressure is 1400 psi for Polypore Columns.
HPLC Columns
Molecular Weight
Solubility
<2000
Organic
Hexane
Water
>2000
Sorbent
Adsorption
Polar phase
Reversed phase
Spheri-5® Silica, Pecosphere™ Silica
Spheri-5 Cyano, Amino
RP-8: Spheri-5, Peco™ Red. Act.-3 and 5
RP-18: Spheri-5, Pecosphere-3 and 5, Peco Red. Act.-3 and 5
Spheri-5, ODS, Phenyl, Cyano, CHOICE
Spheri-5 Cyano, Amino
RP-8: Spheri-5, Peco Red. Act.-3 and 5
RP-18: Spheri-5, Pecosphere-3 and 5, Peco Red. Act.-3 and 5
Spheri-5, ODS, Phenyl, Cyano, CHOICE
Aquapore® AX-300
Non-ionic
Polar phase
Reversed phase
Ionic
Ion exchange
Water
Ion exchange
Wide-pore
reversed phase
Aquapore AX-300
Aquapore OD-300, RP-300, BU-300
Column Selection Guide for Biological Applications
Molecular Weight
Mode
Proteins
Wide-pore
reversed phase
Ion exchange
Aquapore OD-300, RP-300, BU-300
Reversed phase
Wide-pore
reversed phase
Ion exchange
Validated™, Peco Red. Act.-3 and 5, CHOICE
Aquapore OD-300, RP-300, BU-300
Amino acids
Reversed phase
Spheri-5 RP-18, Validated
Oligonucleotides, Nucleotides
Wide-pore
reversed phase
Ion exchange
Aquapore OD-300, RP-300, Speri-5 RP-18, CHOICE
Nucleosides
Reversed phase
Spheri-5 RP-18, CHOICE
Organic acids
Mixed mode
Polypore H
Sugars
Mixed mode
Polypore CA
Peptides
Aquapore AX-300
Aquapore AX-300
Aquapore AX-300
Specific Recommendations
Support Types
– Pharmaceutical/Clinical: Validated, Red. Act.-3
– Protein/Peptides: Aquapore OD-300, RP-300, BU-300
– DNAs/Polynucleotides: Aquapore RP-300
– Industrial/Food: Spheri-5, Pecosphere, Red. Act.-3
– Environmental: Spheri-5, Pecosphere, Red. Act.-3
– Sugars: Spheri-5 Amino, Polypore CA
– Organic Acids/Alcohols: Polypore H
Silica is the most common HPLC support. It is efficient
and rugged, but has a limited pH range of 2-7. Polymerbased supports (polystyrene copolymer) offer a greater
pH range of 1-14, but have lower pressure ratings and
some limitations with organic solvents. Small-pore
(80-100 Å) supports are used for small molecules,
while wide-pore supports (300 Å) are better suited
for proteins or other macro-molecules.
www.perkinelmer.com/essentials
Alcohol
Mode
LC-25
Column Selection Guide
1.800.561.4646 Canada
LC-26
HPLC Columns
Brownlee™ MPLC® Columns
1.800.762.4000 US
www.perkinelmer.com/essentials
Reversed Phase
30 mm
4.6 mm i.d.
2 per pkg.
(Requires
holder
07150013)
Part No.
30 mm
2.1 mm i.d.
2 per pkg.
(Requires
holder
07150013)
Part No.
100 mm
4.6 mm i.d.
1 per pkg.
(Requires
holder
07150014)
Part No.
100 mm
2.1 mm i.d.
1 per pkg.
(Requires
holder
07150014)
Part No.
220 mm
4.6 mm i.d.
1 per pkg.
(Requires
holder
07150015)
Part No.
220 mm
2.1 mm i.d.
1 per pkg.
(Requires
holder
07150015)
Part No.
RP-8, Spheri-5®
C-8, monofunctional, 5 µm, 80 Å
07110001
07110002
07110003
07110004
07110005
07110006
RP-8, Spheri-10
C-8, monofunctional, 10 µm, 80 Å
07110121
RP-18, Spheri-5
C-18, monofunctional, 5 µm, 80 Å
07110013
07110016
07110017
07110018
RP-18, Spheri-10
C-18, monofunctional, 10 µm, 80 Å
07110115
ODS, Spheri-5
C-18, polyfunctional, 5 µm, 80 Å
07110019
Phenyl, Spheri-5
Phenyl, 5 µm, 80 Å
07110025
OD-300, Aquapore® ODS
C-18, 7 µm, 300 Å
07110235
07110234
07110232
07110233
07110231
07110236
RP-300, Aquapore Octyl
C-8, 7 µm, 300 Å
07110055
07110056
07110057
07110058
07110059
07110060
BU-300, Aquapore Butyl
C-4, 7 µm, 300 Å
07110061
07110062
Cyano, Spheri-5
Cyanopropyl, 5 µm, 80 Å
07110043
07110123
07110014
07110015
07110117
07110020
07110021
07110119
07110022
07110027
07110023
07110029
07110064
07110045
07110047
07110033
07110035
Polar Phase
07110032
Silica, Spheri-5
5 µm, 80 Å
07110031
Silica, Spheri-10
10 µm, 80 Å
07110145
Amino, Spheri-5
Aminopropyl, 5 µm, 80 Å
07110037
07110039
07110041
Cyano, Spheri-5
Cyanopropyl, 5 µm, 80 Å
07110043
07110045
07110047
07110075
07110077
Ion Exchange
AX-300, Aquapore
7 µm, 300 Å, weak anion
07110073
Polypore® H
10 µm, polymeric, hydrogen form
07110085
07110087
07110089
Polypore CA
10 µm, polymeric, calcium form
07110091
07110093
07110095
Note: See page LC-34 for additional MPLC holders.
07110074
07110024
HPLC Columns
Peco HCODS is a wide-pore (300 Å, 5 µm, polyfunctional
C18) sorbent for separation of proteins and peptides.
PerkinElmer’s Peco cartridges (including Fast LC) are
available with MPLC® holders. Three cartridge lengths
(30, 80, and 150 mm) are available in 4.6 mm i.d.
Additionally, the Peco cartridges are still compatible
with the “old-style” Peco cartridge holders (wrenchtightened). Three Peco silica-based supports are
available.
295 nm
4
5
3
6
1
UV ABSORBANCE
Pecosphere™ is a small-pore, extremely rugged (80 Å,
3, 5, and 10 µm, C18 or silica) sorbent for HPLC of small
molecules.
2
1
3
5
4
3
1
4
0.0
5
Standards 1.
2.
3.
4.
5.
7 6.
7.
Vitamin C
Niacin
Niacinamide
Pyridoxine
Thiamine
Folic Acid
Riboflavin
Multivitamin Capsule Found (mg)
1.
176.00
3.
26.00
7
4.
2.23
5.
11.30
6.
1.06
6
7.
5.38
Centrum™ Tablet Found
1.
3.
4.
7 5.
6.
6
7.
5.0
MINUTES
(mg)
74.00
18.50
2.51
1.45
0.42
1.62
10.0
Analysis of water-soluble vitamins in multivitamin tablets.
Peco MPLC holders (80 mm and 30 mm).
Column:
Detection:
Mobile Phase:
Flow Rate:
Sample:
Reduced-activity 3 µm C8 column (83 mm x 4.6 mm i.d.)
UV Absorbance at 275 nm
15% methanol, 85% [10 mM hexanesulfonate, 1% acetic acid, 0.13% triethylamine in water]
1.5 mL/min. at 35° C
5 µL of vitamin tablet extracts
Specifications
Particle
Size
Pore
Diameter
Surface
Area (M2/G)
%
Carbon
End
Cap
C18, monofunctional
3 µm
80 Å
170
11%
Yes
Pecosphere 5 C18
C18, monofunctional
5 µm
80 Å
170
11%
Yes
Reduced Activity 3 C18
C18, monofunctional
3 µm
80 Å
200
12%
Yes
Reduced Activity 3 C8
C8, monofunctional
3 µm
80 Å
200
5%
Yes
Reduced Activity 5 C18
C18, monofunctional
5 µm
80 Å
200
12%
Yes
Reduced Activity 5 C8
C8, monofunctional
5 µm
80 Å
200
5%
Yes
Product
Functionality
Pecosphere 3 C18
Peco HCODS
C18, polyfunctional
5 µm
300 Å
90
9%
No
C18 Scavenger
C18, monofunctional
10 µm
80 Å
170
11%
Yes
www.perkinelmer.com/essentials
PerkinElmer pioneered the development of Fast LC
and introduced the popular 3x3 Columns (33 x 4.6 mm)
in the 80s. The 3x3 Column is capable of very rapid
analyses, as short as one to two minutes. These columns
are available in economical packs of five. The 80 mm
long 3x8 Column with >10,000 plates can separate
many complex mixtures in less than 10 minutes.
SCAVENGER COLUMNS are small precolumns (33 x
4.6 mm i.d.) packed with 10 µm, C18 or silica materials.
The scavenger is placed before the injector to protect
the analytical column from mobile phase contaminants.
Its use is mandatory for Fast LC to prolong column life.
It is available as a pack of five and requires the Peco
MPLC holder.
Reduced Activity is a small-pore, base-deactivated
(100 Å, 3, and 5 µm, C8 or C18) sorbent developed
for HPLC of basic analytes and pharmaceuticals. The
proprietary bonding chemistry increases its resistance
to acidic mobile phase.
275 nm
Fast LC with 3x3™ Peco Columns
LC-27
Fast LC and Peco™ Columns
1.800.561.4646 Canada
LC-28
HPLC Columns
Fast LC and Peco™ Columns
1.800.762.4000 US
Description
Pecosphere 3 C18
Monofunctional, 3 µm, 80 Å
33 x 4.6 mm i.d.,
5 per pkg.
(Requires holder
07150028)
Part No.
83 x 4.6 mm i.d.,
1 per pkg.
(Requires holder
07150029)
Part No.
02580164
02580166
Pecosphere 5 C18
Monofunctional, 5 µm, 80 Å
150 x 4.6 mm i.d.,
1 per pkg.
(Requires holder
07150030)
Part No.
02580169
Pecosphere 3CR C8
Monofunctional Base Deactivated, 3 µm, 80 Å
02580191
02580192
Pecosphere 3CR C18
Monofunctional Base Deactivated, 3 µm, 80 Å
02580195
02580194
Reduced Activity 3 C18
Monofunctional, 3 µm, 80 Å
N9303395
N9303394
Reduced Activity 3 C8
Monofunctional, 3 µm, 80 Å
N9303391
N9303392
Reduced Activity 5 C18
Monofunctional, 5 µm, 80 Å
N9303396
Reduced Activity 5 C8
Monofunctional, 5 µm, 80 Å
N9303368
Peco HCODS C18
Polyfunctional, 5 µm, 300 Å
02580213
Normal Phase
Pecosphere 3 Silica
02580167
References:
J. R. Gant and M.W. Dong, “Practical benefits of high-speed LC
in pharmaceutical analysis,” Pharm. Tech., 11(10), 44, 1987.
M. W. Dong, J.R. Gant, and P.A. Perrone, “Extending the lifetime
of LC columns by using guard and scavenger columns,”
LC.GC 3, 786, 1985.
M.W. Dong and J. L. Pace, “A validated HPLC method for the
analysis of multivitamins,” LC.GC, 1996, in press.
Scavenger Columns
Silica Scavenger, 10 µm
02580203
C18 Scavenger
Monofunctional, 10 µm, 80 Å
02580202
Peak Identification
1.Acetaminophen
2.Caffeine
3.Salicylamide
4.Acetylsalicylic Acid
1
Note: See page LC-33 for details on Peco MPLC holders.
3
10 µm
60
4
HETP (µm)
www.perkinelmer.com/essentials
Reversed Phase
40
2
5 µm
20
0
3 µm
1
MINUTES
2
Analysis of an analgesic tablet using Fast LC.
0
0
2
4
6
8
FLOW RATE (mL/min)
Van Deemter’s curves showing column plate height vs. flow rate for 3, 5,
and 10 µm particle columns. The 3 µm particle is preferred for Fast LC because
of its superior performance and higher optimum flow rate.
Column:
Detection:
Mobile Phase:
Flow Rate:
Sample:
Pecosphere 3 x 3 C18 (33 x 4.6 mm)
UV at 240 nm
15% CH3CN in H20
2.0 mL/min.
1 µL of the tablet extract
HPLC Columns
Important Features
of Validated Columns
Validated Sorbent
■ Guaranteed batch-to-batch reproducibility.
■ Test Chromatogram and Certification of Compliance
shipped with each column (except for 30 mm and
NewGuard®).
■ Packed with a 5 µm reduced activity monofunctional
C18 sorbent.
■ Compatibility with acidic, neutral, and basic analytes.
■ Excellent column lifetime.
■ Available in 30 mm, 100 mm, 150 mm, or 220 mm
MPLC cartridges (2.1 mm and/or 4.6 mm i.d.).
■ Select 100 mm cartridge for routine assays.
■ 30 mm cartridge for screening or as a replaceable
front end.
■ Use 2.1 mm i.d. cartridges to reduce solvent
consumption.
■ Lot history tracking system.
The Validated sorbent is derived from a neutral
“Type B” silica with inherent low silanophilic activity.
Each sorbent lot is tested to meet stringent specifications for the separation of basic, neutral, and acidic
test probes. Column lifetime studies and additional
selectivity evaluations using real samples are also
Specifications
Product
Functionality
Validated (5 µm)
C18 monofunctional
Pore
Diameter
Surface
Area (M2/G)
%
Carbon
End
Cap
100 Å
350 ± 10%
18%
Yes
Validated HPLC Columns
Description
Part No.
Validated C18, 220 x 4.6 mm (requires 220 mm Holder 07150015)
00402243
Validated C18, 150 x 4.6 mm (requires 150 mm Holder 07150030)
00403058
Validated C18, 100 x 4.6 mm (requires 100 mm Holder 07150014)
00402241
Validated C18,100 x 2.1 mm (requires 100 mm Holder 07150014)
00402240
Validated C18, 30 x 4.6 mm (requires 30 mm Holder 07150013)
00402239
Validated C18, NewGuard®, 15 x 3.2 mm (requires NewGuard Holder 07150001)
00402237
100 mm NewGuard System Holder (For direct coupling of NewGuard and 100 mm cartridge)
07150016
Union (For direct coupling of two cartridges)
07150018
Note: See page LC-33 for additional MPLC holders.
Validated C18 (100 x 4.6 mm),75/25 MeOH/Water 1 mL/min.,
30° C,230 nm detection
Validated C18 (100 x 4.6 mm i.d.) 34% MeOH,65% water,
1% HOAc,1 mL/min.,1650 psi,30º C
10 µL of degraded chlorthalidone at 1 µg/µL
200
Pyridine
180
Propyl
Paraben
160
Silica Lot 1
ABSORBANCE mAU
140
N,N-dimethylaniline
120
100
Lot 2
80
60
40
Uracil
Toluene
CBSA
Chlorthalidone
Impurity
Lot 3
CCA
20
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
MINUTES
0
MINUTES
4
Performance of Validated Column with basic, acidic,
and neutral test probes.
Comparative test results of columns packed with three different silica lots for a USP
assay of chlorthalidone. The chromatogram of a degraded bulk sample (1 mg/mL)
shows the presence of an unidentified impurity, chlorthalidone, its hydrolysis product,
4'-chloro-3'-sulfamoyl-2-benzophenone carboxylic acid (CCA) and a degradation
product, 2-chloro-5- (1-methoxy-3-oxo-1-isoindoliny)-benzenesulfonamide (CBSA).
www.perkinelmer.com/essentials
■ Convenient cartridge design.
conducted. A high-temperature bonding technique
is coupled with an exhaustive end-capping procedure
to ensure maximum coverage of the silica surface.
A proprietary treatment step is used to further eliminate
any trace residual metals in the silica that create active
adsorptive sites. The result is a highly deactivated
column which yields excellent peak shape for difficult
basic analytes, pharmaceuticals, and small peptides.
LC-29
Brownlee™ Validated™ MPLC® Columns
1.800.561.4646 Canada
LC-30
HPLC Columns
CHOICE™ Columns for LC/MS
www.perkinelmer.com/essentials
COLUMNS FOR LC/MS
1.800.762.4000 US
Columns for LC/MS
The CHOICE columns provide the speed and efficiency
appropriate for LC/MS. Their separation requirements
vary depending on their system, sample, and their
mass spectrophotometer.
PFPP for Separating
Basic Drugs for LC/MS
Penta Fluoro Phenyl Propyl (PFPP) phase is ideal for
basic drug separation prior to mass spectrometry. This
bonded phase has been shown to efficiently separate
basic drugs in a 90% Acetonitrile/water mobile phase,
eliminating the interference of ion-pairing reagents
and ion-suppressing agents normally used for these
separations on C18.1, 2
concentration. A longer column will be better suited
to more complicated mixtures or where resolution
may be difficult. If sample size is a concern; use a
column with a smaller internal diameter; 2.1 mm
or 3.2 mm, since this will provide greater sensitivity.
There are four levels of efficiency/capacity to
choose from:
A single quadrapole MS user may require a much
better chromatographic separation than a triple
quadrapole MS. The matrix below illustrates the
wide variety of column dimensions for the different
chromatographic needs. Shorter length columns
allow for faster separations. Smaller internal diameters (i.d.) offer higher sensitivity for smaller sample
Type of Spectrometer:
Triple or Single quad
Single quad
Triple quad
Triple quad
User Needs:
moderate efficiency
low capacity
high throughput
better efficiency
medium capacity
best efficiency
high efficiency
medium capacity high capacity
Column Recommondation:
20 x 3.2, 3 µm
30 x 2.1, 3 µm
30 x 4.6, 5 µm
50 x 3.2, 3 µm
50 x 3.2, 5 µm
50 x 4.6, 5 µm
References:
1
S.R. Needham, et.al. Rapid Commun. in Mass Spectrom.,
13, 2231-2236 (1999)
2
S.R. Needham, et.al. J. Chromatogr, A 869 (2000) 159-170
NEW!
Specifications
Particle Size
Pore
Diameter
Surface
Area (M2/G)
%
Carbon
End
Cap
CHOICE C18 3 µ
3 µm
100 Å
350
12%
Yes
CHOICE C8 3 µ
3 µm
100 Å
350
7%
Yes
CHOICE C18 5 µ
5 µm
100 Å
350
12%
Yes
CHOICE PFPP, 5 µ
5 µm
100 Å
320
5%
Yes
Description
CHOICE Columns
Description
20 x 3.2 mm i.d.,
1 per pkg.
(Requires holder
7150001)
Part No.
20 x 3.2 mm i.d.,
3 per pkg.
(Requires holder
7150001)
Part No.
CHOICE C18, 3 µm
Pecosphere C18, 3 µm N2580000
N2580010
Note: See page LC-33 for additional MPLC holders.
50 x 3.2 mm i.d.,
1 per pkg.
(Requires holder
N2580030)
Part No.
N2580002
N2580003
N2580012
N2580013
50 x 4.6 mm i.d.,
1 per pkg.
(Requires holder
N2580030)
Part No.
N2580011
CHOICE C18, 5 µm
CHOICE PFPP, 5 µm
30 x 4.6 mm i.d.,
1 per pkg.
(Requires holder
7150013)
Part No.
N2580001
CHOICE C8, 3 µm
Pecosphere C8, 3 µm
30 x 2.1 mm i.d.,
1 per pkg.
(Requires holder
7150013)
Part No.
N2580020
N2580042
N2580022
N2580021
HPLC Columns
Product
Pore
Diameter
Functionality
Surface
Area (M2/G)
%
Carbon
End
Cap
RP-8, VeloSep
Octyl (C8)
100 Å
170
7%
Yes
RP-18, VeloSep
Octadecyl (C18)
100 Å
170
14%
Yes
VeloSep Columns
Preparative columns are 10 mm i.d. cartridges,
packed with Aquapore® 20 µm, 300 Å sorbents.
– Easy scale-up from the Aquapore analytical
columns using similar bonded phase.
– Available in 30 mm, 100 mm, and 250 mm
cartridges.
– The unique 100 mm and 250 mm cartridge design
incorporates a moveable inlet plug and filter which
compensates for changes in bed volume with use.
– Typical sample capacity of the 250 mm cartridge is
50 mg to 1 g of material (depending on resolution
and purity requirements). The typical flow rate is
4-10 mL/min.
– Save time with high-pressure preparative runs
up to 3000 psi.
– Achieve high performance with the 20 µm,
300 Å sorbents optimized for bioseparations.
40 mm Cartridge
3.2 mm i.d., 2 per pkg.
(Requires holder 07150013)
Part No.
100 mm Cartridge
3.2 mm i.d.
(Requires holder 07150014)
Part No.
RP-8, VeloSep
3 µm, C18, 100 Å
07110189
07110190
RP-18, VeloSep
3 µm, C18, 100 Å
07110191
07110192
Description
Specifications
THE AQUAPORE PREPARATIVE SORBENTS ARE SPHERICAL 20 µM SILICA-BASED SORBENTS.
Pore
Diameter
Surface
Area (M2/G)
%
Carbon
End
Cap
Octyl (C8)
300 Å
100
5%
Yes
Octadecyl (C18)
300 Å
100
10%
Yes
Product
Functionality
Aquapore Octyl
Aquapore ODS
Preparative Columns
30 mm Cartridge
10 mm i.d.
(Requires holder
07150004)
Part No.
100 mm Cartridge
10 mm i.d.
(Requires holder
07150005)
Part No.
250 mm Cartridge
10 mm i.d.
(Requires holder
07150006)
Part No.
Aquapore Octyl,
20 µm, 300 Å
07110164
07110165
07110166
Aquapore ODS,
20 µm, 300 Å
07110108
07110114
07110163
Description
400
300
23.414
2.029
2.859
3.237
100
26.763
200
4.018
5.250
5.938
6.770
7.184
0.333
8.926
9.643
10.117
ABSORBANCE mAU
500
Cloxicillin
Penicillin G
Cloxicillin contaminant
Ampicillin
Amoxicillin
20.218
600
Piperacillin
Prep-10 Cartridges
0
0
0
5
MINUTES
10
Analysis of Penicillins. VeloSep RP-18, 3 µm, 100 x 3.2 mm.
Conditions:
Gradient:
Flow:
Solvent A: 10 mM sodium phosphate pH 6.5.
Solvent B: 50% isopropyl alcohol in water.
5-50% B in 10 min.
0.5 mL/min. Temp: 5° C, 230 nm.
2
4
6
8
10 12
14
16 18 20
MINUTES
22
24
26
28
30
32
Purification of synthetic trityl-on oligonucleotides. Aquapore Octyl,
20 µm. 250 x 10 mm.
Conditions:
Gradient:
Sample:
Flow Rate:
Buffer A: 100 mM triethylammonium acetate pH 7.6.
Buffer B: 80% acetonitrile in Buffer A.
10-45% B in 35 minutes.
0.25 µ mole DNA material.
5.0 mL/min. Ambient. 260 nm.
34
www.perkinelmer.com/essentials
■
Specifications
VeloSep columns are 3.2 mm i.d. cartridges packed
with 3 µm reversed-phase support for high throughput analysis and reduced solvent consumption.
– Improve sensitivity and speed while cutting
solvent consumption by half.
– Packed with 3 µm C8 or C18 sorbents.
– Available in 40 mm or 100 mm lengths.
ABSORBANCE
■
VeloSep® Columns and Brownlee™ Preparative Columns
LC-31
1.800.561.4646 Canada
LC-32
HPLC Columns
NewGuard® Columns, Replacement Seals, and Test Mixes
www.perkinelmer.com/essentials
■
NewGuards are small guard cartridges (15 mm x
3.2 mm i.d.) packed with 5 µm or 7 µm sorbents.
NewGuard cartridges prolong column life by
eliminating particulates, contaminants, and strongly
bound sample components. They act as replaceable,
disposable heads of your analytical columns. There
is negligible loss of efficiency and little effect on
retention or resolution. NewGuards are available
in a convenient 3-pack and can be coupled directly
to any MPLC® cartridge with a union (07150018).
– Prolong column life by 2-5 fold.
– Protect your column from particulates and strongly
bound sample components.
– Optimized dimensions to prevent loss of resolution.
– Easy coupling to MPLC cartridges or conventional
columns.
– Finger-tight seal to 7000 psi using NewGuard
holders.
– Can be used for sample preconcentration
(connected to sample injection loop).
1.800.762.4000 US
NewGuard Columns
15 mm cartridge, 3.2 mm i.d., 3 per pkg.
(Requires holder 07150001)
Part No.
Description
Validated®, C18, 5 µm spherical
00402237
RP-2, Aquapore® Dimethyl, 7 µm spherical
07110086
RP-4, Aquapore Butyl, 7 µm spherical
07110088
RP-8, Aquapore Octyl, 7 µm spherical
07110090
RP-18, Aquapore ODS, 7 µm spherical
07110092
Phenyl, Aquapore Phenyl, 7 µm spherical
07110096
Amino, Aquapore Amino, 7 µm spherical
07110098
Cyano, Aquapore Cyano, 7 µm spherical
07110100
Anion, Aquapore Anion, 7 µm spherical
07110102
Cation, Aquapore Cation, 7 µm spherical
07110104
Diol, Aquapore Diol, 7 µm spherical
07110105
Silica, Aquapore Silica, 7 µm spherical
07110106
Note: Actual bed length of NewGuard is about 13 mm.
Replacement Seals for MPLC and Prep-10 Holders
14.52
8.154
Item
Description
Part No.
Seal Replacement Kit for MPLC Holders
Tools and two 7000 psi seals.
07150023
Seals for MPLC Holders
Two 7000 psi seals. (Seal Replacement Kit tools required.)
07150024
Prep-10 Seal Replacement Kit
Tools only. Seals not included.
07150011
Prep-10 Inlet Seal
One each. (Prep-10 Seal Replacement Kit tools required.)
07150012
Prep-10 Outlet Seal
One each. (Prep-10 Seal Replacement Kit tools required.)
07150026
HPLC Test Mixes
Description
Part No.
Universal test mix for reversed-phase (5 mL/pkg.)
00890893
Simultaneous determination of trimethoprin
and sulfamethoxazole using NewGuard
RP-18 cartridge with Spheri-5 RP-18. 220 x
4.6 mm column.
Conditions:
Flow Rate:
80% water, 20% acetonitrile,
ambient temperature.
1 mL/min.
NewGuard cartridges directly coupled to a 220 mm MPLC cartridge
and connected externally to a 250 mm conventional column.
Courtesy of Dopharma Research and Inacom.
View of the NewGuard holder
and a NewGuard 3/pack.
HPLC Columns
■
LC-33
MPLC® Cartridge Hardware
1.800.561.4646 Canada
The patented MPLC cartridge system ensures leak-free operation up to 7000 psi, with only finger- tightening. The high-pressure seal in each end assembly actually seals
tighter as pressure increases. No wrenches are required, and there is no need to disconnect any tubing to your LC system when changing a cartridge. Each MPLC cartridge
can be directly coupled to another using a union.
Description
Part No.
Universal Holder Kit
Includes 100 mm and 220 mm holder bodies,
2 end assemblies, 1 union, 1 NewGuard end assembly.
07150025
NewGuard® Holder
Holds a single NewGuard cartridge or a single 20 mm
CHOICE™ cartridge.
07150001
30 mm Holder
Holds a single MPLC and CHOICE 30 mm cartridge.
07150013
30 mm Peco Holder
Holds 30 mm Fast LC Peco cartridge only.
07150028
50 mm Holder
Holds a single 50 mm CHOICE cartridge only.
N2580030
80 mm Peco Holder
Holds 80 mm Fast LC Peco cartridge only.
07150029
100 mm Holder
Holds a single MPLC 100 mm cartridge.
07150014
150 mm Holder
Holds a single MPLC 150 mm cartridge.
07150030
220 mm Holder
Holds a single MPLC 220 mm cartridge.
07150015
250 mm Holder
Holds a single MPLC 250 mm cartridge.
07150031
100 mm NewGuard
System Holder
Holder for a NewGuard and a 100 mm coupled cartridge.
07150016
220 mm NewGuard
System Holder
Holder for a NewGuard and a 220 mm coupled cartridge.
07150017
130 mm MPLC System Holder
Holder for a 30 mm and a 100 mm coupled cartridge.
07150032
Union
For direct coupling of 2 cartridge holders.
(Two holder bodies and 2 end assemblies also required.)
07150018
NewGuard
End Assembly
Upgrades a 30 mm holder to a NewGuard holder.
07150002
End Assembly
Holder component.
07150019
30 mm Holder Body
Holder component.
07150020
100 mm Holder Body
Holder component.
07150021
220 mm Holder Body
Holder component.
07150022
Prep-10 Cartridge Holders
Description
Part No.
30 mm Prep-10 Holder
Holds a single 30 mm Prep-10 guard cartridge.
07150004
100 mm Prep-10 Holder
Holds a single 100 mm Prep-10 cartridge.
07150005
250 mm Prep-10 Holder
Holds a single 250 mm Prep-10 cartridge.
07150006
www.perkinelmer.com/essentials
MPLC/Peco™ Holders
LC-34
HPLC Columns
Brownlee™ Conventional and Microbore Columns
www.perkinelmer.com/essentials
BROWNLEE CONVENTIONAL
COLUMNS
■
Conventional Brownlee Columns (noncartridge)
use standard compression end fittings compatible
with all HPLC instrumentation. These columns do
not require MPLC® holders.
– End fittings compatible with HPLC systems from
any vendors.
– Use with NewGuard® system (line connection)
for even longer column life.
– Each column is individually tested.
Conventional columns do not require MPLC holders.
1.800.762.4000 US
Reversed Phase
250 mm Conventional Column
4.6 mm i.d.
Part No.
Description
RP-2, Spheri-10®, C2, 10 µm
07120005
RP-8, Spheri-5, C8, 5 µm
07120012
RP-18, Spheri-10, C18, 10 µm
07120001
RP-18, Spheri-5, C18, 5 µm
07120016
ODS, Spheri-5
C-18, polyfunctional, 5 µm
07120019
OD-300, Aquapore® ODS
C-18, 7 µm, 300 Å
07120073
RP-300, Aquapore Octyl
C-8, 7 µm, 300 Å
07120033
Polar Phase
Silica, Spheri-5
5 µm, 80 Å
07120023
Ion Exchange
AX-300, Aquapore
7 µm, 300 Å, Weak anion
07120040
BROWNLEE MICROBORE
HPLC COLUMNS
■
Microbore columns (1.0 mm i.d.) are ideal for
the analysis of samples of limited availability
(e.g., micropurification of picomole levels of
proteins/peptides). Reducing the column diameter
from the standard 4.6 mm to 1.0 mm increases the
mass sensitivity by 20 times. Sample components
can be collected in small elution volumes (1-50 µL)
for further sequence or mass analysis. Microbore
offers major benefits in pharmacokinetic assays
and LC/MS applications. The typical flow rate range
is 10-100 µL/min., therefore specialized HPLC
systems may be required for optimum column
performance.
– Increase sensitivity and decrease solvent consumption by a factor of 20 (compared with 4.6 mm i.d.).
– Reduce sample size for pharmacokinetic assays.
– Better compatibility with LC/MS interfaces.
– Each column is individually tested.
250 mm, 100 mm Microbore Columns (1.0 mm i.d.)
ORDERING INFORMATION
100 mm Microbore
1.0 mm i.d.,
Part No.
250 mm Microbore
1.0 mm i.d.,
Part No.
RP-300, Aquapore
7 µm, C8, 300 Å
07120096
07120097
OD-300, Aquapore
7 µm, C18, 300 Å
07120099
Description
References:
R.P.W. Scott (Ed.), Small Bore LC Columns, John Wiley & Sons, New York, 1984.
R.J. Sawchuk and L.L. Cartier, “Simultaneous LC determination of carbamazepine in plasma,” Clin. Chem., 28, 2127, 1982.
HPLC Columns
Subject
App.Note.
Subject
App.Note.
Food (cont.)
Nucleosides and Bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCBIO-1
Nucleosides: Human Serum Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCBIO-2
RPC: Separation of Proteins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCBIO-17
Tryptic Digest of Glycoprotein Human IgA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCBIO-21
2-D Purification of HIV Protease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCBIO-22
Prep: Purification of Maganin Peptides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCBIO-25
Water-soluble Vitamins in Animal Feeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-20
Fat-soluble Vitamins in Animal Feeds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-21
Sugar Analysis (amino column) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-22
Sugar Analysis (resin column) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-23
Organic Acids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-24
Capsaisins in Hot Peppers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-25
Analysis of Organic Acids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-26
Organic Acids, Sugars, and Ethanol in Grape Musts and Wine . . . . . . . . . . . . . . . . LCFD-27
Organic Acids in Fruit Juice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-28
Analysis of Sugars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-29
Amphetamines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCCL-1
Analgesics (narcotics) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCCL-2
Anticonvulsants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCCL-3
Barbiturates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCCL-4
Hallucinogens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCCL-5
Opiates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCCL-6
Theophylline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCCL-7
Toxicology Screen of Abused Drugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCCL-8
Tricyclic Antidepressants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCCL-9
Tricyclic Antidepressants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCCL-10
Xanthines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCCL-11
Industrial
Chemicals: Deuterated Benzene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCIN-1
Epoxy Resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCIN-2
Fatty Acids (short-chain) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCIN-3
Hexachlorophene. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCIN-4
Polystyrene Additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCIN-6
Analysis of Propellants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCIN-7
Surfactants in Shampoo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCIN-8
Terephthalic Acid in PET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCIN-9
Environmental
Phenol Priority Pollutants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCENV-1
Benzidine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCENV-2
Phthalate Esters in River Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCENV-3
Polychlorinated Biphenyls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCENV-4
Food
Aflatoxins in Peanuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-1
Aflatoxins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-2
Amino Acids in Soy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-3
Fatty Acids (bromophenacyl esters) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-4
Food Dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-5
Non-nutritive Sweetener in Beverage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-6
Phenolic Acids in Beer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-7
Phenolic Antioxidants in Oils. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-8
Phenols in Whiskey. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-9
Piperine in Black Pepper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-10
Preservatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-11
Tocopherols in Palm Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-15
Triglycerides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-16
Water-soluble Vitamins in Tablets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-18
Water-soluble Vitamins in Beverages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCFD-19
Pharmaceutical
Analgesics in Tablets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-1
Analgesics/Anti-inflammatory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-2
Antibiotics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-3
Antifungal Ingredient Pharm. Cream . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-4
Antihistamines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-5
Benzodiazepines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-6
Cardiac Drugs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-7
Estrogenic Steroids. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-10
Hydrocortisone in Cream. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-11
Parabens in Hand Cream. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-12
Phenothiazines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-13
Prednisone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-14
Chlorthalidone Stability Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-15
Analgesic Tablet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-16
Carbamazepine in Serum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-17
Cocaine and Metabolites in Serum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCPH-18
LC/MS of Quinolone Antibiotic Degradation Products. . . . . . . . . . . . . . . . . . . . . . . LCPH-19
To receive application notes, contact PerkinElmer and request LC application note number.
Tel: (800)762-4000 (U.S. only) or (203)762-4000; Fax: (203)944-4904.
Internet: http://www.perkinelmer.com
www.perkinelmer.com/essentials
Biotechnology
Clinical
LC-35
Application Notes
1.800.561.4646 Canada
LC-36
HPLC Applications
Biotechnology Applications
1.800.762.4000 US
Peak Identification
1.Cytosine
2.Uracil
3.Cytidine
4.Uridine
5.Hypoxanthine
6.Xanthine
7.Thymine
8.Inosine
9.Guanosine
10.Thymidine
11.Adenine
12.Adenosine
ABSORBANCE
www.perkinelmer.com/essentials
1
0
10
20
30
40
12
2
3
5
11
6
8
4
7
10
9
50
MINUTES
0
Tryptic Map of Glycoproteins Human IgA
CHROMATOGRAPHIC CONDITIONS
Column:
Aquapore RP-300 (7 µm, 300 Å, 220 x 2.1 mm) (07110060)
Detection:
UV at 214 nm
Mobile Phase: A: 0.1% TFA
B: 0.1% TFA in ACN
Flow Rate:
0.25 mL/min.
Gradient:
2-70% B in 45 min.
Sample:
Tryptic digest of glycoprotein Human IgA 200 pmoles
2
Peak Identification
1.Creatinine
2.Uric Acid
3.Tyrosine
4.Hypoxanthine
5.Undine
6.Xanthine
7.Inosine
8.Guanosine
9.Tryptophan
10.Theobromine
11.Caffeine
4
MINUTES
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere 5 C18 (150 x 4.6 mm, 5 µm) (02580169)
Detection:
UV at 254 nm
Mobile Phase: A: 60% MeOH/H20
B: 0.02M NaH2PO4 in pH 5.5 aqueous buffer gradient 0.5% –
40% A in 3 min.
Flow Rate:
3.5 mL/min.
Pressure:
3,500 psi (24 MPa)
4
Peak Identification
1.Oxalic Acid
2.Citric Acid
3.-Ketoguitaric Acid
4.Malic Acid
5.Succicinic Acid
6.Formic Acid
7.Acetic Acid
8.Fumaric Acid
9.Butyric Acid
5
9
1
10
6
1
2
7
8
3 4
5
6
3
7
8
0
2
Nucleosides and Bases
5
MINUTES
Human Serum Profile
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere 5 C18 (150 x 4.6 mm, 5 µm) (02580169)
Detection:
UV at 254 nm
Mobile Phase: A: 60% MeOH/H2O
B: 0.02 M NaH2PO4 in pH 5.6
Linear gradient from 0.5% – 40% A in 7 min.
Flow Rate:
2.0 mL/min.
Pressure:
2,200 psi (15 MPa)
Inj.Volume: 10 µL of deproteinized serum
9
11
10
0
10
MINUTES
Organic Acids
CHROMATOGRAPHIC CONDITIONS
Column:
Polypore H (220 x 4.6 mm i.d.) (07110089)
Detection:
210 nm
Mobile Phase: 0.01 N H2SO4
Flow Rate:
0.15 mL/min.
Temperature: 25° C
20
HPLC Applications
Peak Identification
1.Barbital
2.Phenobarbital
3.Aprobarbital
4.Butabarbital
5.Mephobarbital
6.Amobarbital
7.Pentobarbital
8.Secobarbital
2
3
1
7
2
www.perkinelmer.com/essentials
Peak Identification
1.Theobromine
2.Theophyline
3.ß-OH Ethyl Theophylline
4.Caffeine
6
3
1
4
4
5
8
0
15
30
SECONDS
45
0
1
MINUTES
Theophylline
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere-3 x 3 C18 (33 x 4.6 mm i.d.) (02580164)
Detection:
UV at 273 nm
Mobile Phase: 11% CH3CN in H2O
Flow Rate:
3.0 mL/min.
Sample:
6 µL injection: 1-10 mg/L standards
4
Peak Identification
1.I-Methylxanthine
2.Xanthine
3.Theobromine
4.Theophylline
5.Diphylline
6.Caffeine
7.ß-Chlorotheophylline
Barbiturates
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere-3 x 3 C18 (33 x 4.6 mm i.d.) (02580164)
Detection:
UV at 200 nm
Mobile Phase: MeOH, 0.015 M (NH4)2HPO2:H2O (55:20:25)
Flow Rate:
2.5 mL/min.
Sample:
3 µL injection: 0.1 mg/mL of each barbiturate
Peak Identification
1.Amitriptyline
2.Imipramine
3.Nortriptyline
4.Desipramine
5.Protriptyline
2
3
1
3
Standard
5
Spiked Serum
Extract
1
2
1
6
4
5
2
3
4
7
80 SECONDS
Xanthines and Metabolites
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere-3 x 3 C18 (33 x 4.6 mm i.d.) (02580164)
Detection:
UV at 254 nm
Mobile Phase: 6/94 (v/v) acetonitrile/water containing 20 µL/L acetic acid
Flow Rate:
5 mL/min.
Sample:
10 µL injection vol.; 0.1 mg/mL of each compound
0
LC-37
Clinical Applications
1.800.561.4646 Canada
1
2
MINUTES
3
0
1
2
MINUTES
Tricyclic Antidepressants
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere-3 Silica (83 x 4.6 mm, 3 µm) (02580167)
Detection:
UV at 210 nm
Mobile Phase: CH3CN/MeOH/i-PrOH/NH4OH (60:32:7.6:0.4)
Flow Rate:
4.5 mL/min.
Inj.Volume: Standard: 1.0 µL serum, extract: 10 µL
3
Environmental Applications
Peak Identification
1.Phenol
2.p-Nitrophenol
3.o-chlorophenol
4.2,4-Dinetrophenol
5.o-Nitrophenol
6.2,4 Dimethylphenol
7.4-Chloro-m-Cresol
8.2,4-dichlorophenol
9.4,6-Dinitro-o-Cresol
10.2,4,6-Trichlorophenol
11.Pentachlorophenol
1.800.762.4000 US
Peak Identification
1.Dimethyl Phthalate
1
2.Diethyl Phthalate
3.Butyl Benzyl Phthalate
4.Dibutyl Phthalate
2
5.Dipentyl Phthalate
6.Dihexyl Phthalate
7.Di(2-Ethylhexyl)
Phthalate
8.Dioctyl Phthalate
3 4
9.Dinonyl Phthalate
5
11
1
4
3
10
6
2
Standards
7
2
7
5
9
8
8
6
9
0
1
2
3
MINUTES
4
5
0
1
8
2
3 0
MINUTES
1
2
Phenol Priority Pollutants
Phthalate Esters in River Water
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere 3 C18 (83 x 4.6 mm i.d., 3 µm) (02580166)
Detection:
UV at 254 nm
Mobile Phase: Linear gradient of 35% acetonitrile/water (pH 2.2)
to 100% acetonitrile in 4 min.
Flow Rate:
2.5 mL/min.
Inj.Volume: 6 µL injection volume; 0.1-0.2 mg/mL of each compound
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere 3 C18 (83 x 4.6 mm i.d., 3 µm) (02580166)
Detection:
UV at 275 nm
Mobile Phase: Linear gradient of 85% acetonitrile/water 1000/0
acetonitrile in 1 min.
Flow Rate:
3.5 mL/min.
Pressure:
3,800 psi (26 MPa)
Peak Identification
1.Benzidine
2.Dichlorobenzidine
3.Diphenylhydrazine
Peak Identification
1.Diquat
2.Paraquat
3.Ethylparaquat
(internal standard)
1
2
2
310 nm
0
20
40
SECONDS
Benzidine
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere 3 C18 (83 x 4.6 mm, 3 µm) (02580166)
Detection:
UV at 280 nm
Mobile Phase: 80% acetonitrile/water (pH 4,7)
Flow Rate:
6.0 mL/min.
Pressure:
5,000 psi (36 MPa)
255 nm
3
0
3
1
ABSORBANCE
www.perkinelmer.com/essentials
LC-38
HPLC Applications
2
MINUTES
3
4
80
Diquat and Paraquat
CHROMATOGRAPHIC CONDITIONS
Column:
Two Pecosphere 3 x 3, silica (83 x 4.6 mm i.d., 3 µm) (02580167)
Detection:
UV at 310 for diquat and 255 for paraquat
Mobile Phase: Tetramethyl ammonium hydroxide 10 g/L,
ammonium sulfate 30 g/L (in water)
Flow Rate:
0.8 mL/min.
Sample:
10 ng per component
Temperature: 70° C
HPLC Applications
citric
ascorbic
malic
oxalic
quinic
Trilinolenin
OOO
citric
LPO
shikimic
succinic
citric
malic
POP
PPP
SOO
SPO
LPL
0
1.0
POO
Triolean
(000)
LOL
lactic
acetic
Standards
LOO
Trilinolein
oxalic
quinic
Cranberry
cocktail
malic
shikimic
ascorbic
Tripalmitolein
oxalic
tartaric
quinic
ABSORBANCE (210 nm)
Standards
000=Triolean
L=Linoleic Acid
P=Palmitic Acid
S=Stearic Acid
2.0
3.0
MINUTES
4.0
5.0
4
8
0
4
MINUTES
6.0
8
12
Olive Oil Triglycerides
Analysis of Organic Acids in Fruit Juice Using Reversed-phase Columns
CHROMATOGRAPHIC CONDITIONS
Column:
Spheri-5 RP-18 (220 x 4.6 mm, 5 µm) (07110017)
Detection:
UV at 210 nm
Mobile Phase: 25 mM KH2PO4 at pH 2.4, purge with 30%
ACN for 1 min. then equilibrate for 10 min.
Flow Rate:
1.5 mL/min. at room temperature, pressure 2,400 psi
Sample:
5 µL of beverage sample diluted 1:4 in mobile phase
CHROMATOGRAPHIC CONDITIONS
Columns:
Two PerkinElmer Pecosphere 3 x 8 C18 columns connected
in series (83 x 4.6 mm i.d., 3 µm) (02580166)
Detection:
Refractive Index
Mobile Phase: Acetone/Acetonitrile (70:30)
Flow Rate:
2.5 mL/min.
6
Peak Identification
1.Matrix
2.Saccharin
3.Caffeine
4.Aspartame
5.Vanillin
6.Sodium Benzoate
Standards
3
2
295 nm
275 nm
2
4
3
6
Found mg/g
3 3.Niacinamide
5.Thiamine
6.Folic Aicd
7.Riboflavin
5
5.Thiamine
6.Folic Acid
7.Riboflavin
5
1
UV ABSORBANCE
1
1.Vitamin C
2.Niacin
3.Niacinamide
4.Pyridoxine
4
7
Vitamin Premix
7.2
2.3
0.3
1.7
7
5
6
0
5
MINUTES
0.0
5.0
MINUTES
10.0
Sweeteners and Additives in Beverages
Water-soluble Vitamins in Animal Feed Premix
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere 5 x 15 C18 (150 x 4.6 mm i.d., 5 µm) (02580169)
Detection:
UV at 254 nm
Mobile Phase: 45% A in B
A: Methanol
B: Water with 0.7 g m/L hexane sulfonic acid & H3PO4 to pH 2.1
Flow Rate:
1.5 mL/min.
Sample:
5 µL injection of carbonated beverage product
CHROMATOGRAPHIC CONDITIONS
Column:
PerkinElmer Reduced-activity 3 µm C8 column
(83 mm x 4.6 mm i.d.) (N9303392)
Detection:
UV absorbance at 275 nm
Mobile Phase: 15% methanol, 85% [10 mM hexanesulfonate (Sigma),
1% acetic acid, 0.13% triethylamine in water]
Flow Rate:
1.5 mL/min. at 35° C
Sample:
Animal feed premix
www.perkinelmer.com/essentials
Orange
Juice
LC-39
Food Applications
1.800.561.4646 Canada
Food Applications
1.800.762.4000 US
FSV Standards 1.Vitamin A Acetate
2.Vitamin D2
3.Vitamin E
4.Vitamin E Acetate
Ala
Val
2
Arg
Phe
Lys
Ser
Leu
His
0
1
3
UV ABSORBANCE
Thr
285 nm
Gly
265 nm
FLUORESCENCE
Glu
4
Feed Premix
Tyr
1
4
MINUTES
2
0.0
5.0
10.0
org. acid
acetic acid
Analysis of Fat-soluble Vitamins in Animal Feed Premix
CHROMATOGRAPHIC CONDITIONS
Column:
Reduced-activity 3 µm C18 column
(83 mm x 4.6 mm i.d., 3 µm) (N9303394)
Detection:
UV absorbance at 265/285 nm
Mobile Phase: 92% methanol/water
Flow Rate:
1.5 mL/min. at 35° C
Sample:
Animal feed premix
mg/mL
80
glucose
acetic
15.0
MINUTES
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere 3 x 3 C18 (33 x 4.6 mm i.d., 3 µm) (02580164)
Detection:
Fluorescence 340 nm (Ex)/450 nm (Em)
Mobile Phase: A: Methanol
B: 1.5% THF in 50 mM NaOAc (pH 5.9)
Linear gradient of 5% A to 80% A in 6.5 min.
Flow Rate:
2.5 mL/min.
Sample:
Soy protein hydrolyzate sample derivatized with OPA
Grape Juice
4
8
MINUTES
10
12
fructose
fructose
sorbitol
glucose
sucrose
sucrose
Standards
glucose
Apple Juice
butyric
propionic
acetic
formic
6
succinic
tartaric
malic
oxalic
Standard
RI INTENSITY
sucrose
White
Vinegar
2
4
mg/g
4.50
0.10
65.20
8
Analysis of OPA Precolumn Derivatives of Amino Acids
0
Found
1.Vitamin A Acetate
2.Vitamin D3
4.Folic Acid 0.3
fructose
Asp
ABSORBANCE (210 nm)
www.perkinelmer.com/essentials
LC-40
HPLC Applications
14
0
Analysis of Organic Acids
CHROMATOGRAPHIC CONDITIONS
Column:
Polypore H (220 x 4.6 mm, 10 µm) (07110089) with
Polypore H guard column (30 x 4.6 mm) (07110085)
Detection:
UV at 210 nm
Mobile Phase: 0.01N H2SO4
Flow Rate:
0.3 mL/min. at room temp., 300 psi
Sample:
5 µL of standard or vinegar sample diluted 1:4 in mobile phase
10
MINUTES
20
Analysis of Sugars
CHROMATOGRAPHIC CONDITIONS
Column:
Polypore CA (220 x 4.6 mm, 10 µm) (07110095) with
Polypore CA guard column (30 x 4.6 mm) (07110091)
Detection:
RI
Mobile Phase: Water
Flow Rate:
0.2 mL/min. at 75° C, 100 psi
Sample:
10 µL of standard or juice sample diluted 1:4 in water
HPLC Applications
LC-41
Industrial Applications
1.800.561.4646 Canada
1
2
3
4
0
10
20
Epoxy Resin
30
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere 3 C18 (83 x 4.6 mm, 3 µm) (02580166)
Detection:
UV at 230 nm
Mobile Phase: Linear gradient of 40% acetonitrile/water to 100%
acetonitrile in 30 min.
Flow Rate:
2.5 mL/min.
Pressure:
4,300 psi (30 MPa)
Temperature: Ambient
Inj.Volume: 6 µL
5
Peak Identification
1.Unknown
2.Tri-Chlorophenol
3.Unknown
4.Mixed Bis-Pheno
5.Hexachlorophene
6.Unknown
7.Unknown
8.8-Chloro-Trimer
9.9-Chloro-Trimer
1
2
MINUTES
3
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere 5 C18 (150 x 4.6 mm, 5 µm) (02580169)
Detection:
UV at 220 nm
Mobile Phase: 10% CH3CN in water (pH 2.0)
Flow Rate:
2.0 mL/min.
Pressure:
2,600 psi (18 MPa)
Temperature: Ambient
Inj.Volume: 10 µL
1 2
9
4
0
Short-chain Fatty Acids
MINUTES
3
4
Peak Identification
1.Acetophenone
2.Cumyl Alcohol
3.Methyl Styrene
4.Santonox
5.Dicumyl Peroxide
8
5
6
Inj.
2
3
1
Inj.
7
0
5
10
MINUTES
15
0
Hexachlorophene
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere 3 C18 (83 x 4.6 mm, 3 µm) (02580166)
Detection:
UV at 300 nm
Mobile Phase: A: CH3CN
B: 1% CH3COONH4 in MeOH/H20 (77:23)
Concave gradient from 0.1% A to 40% A in 9 min.
Flow Rate:
1.8 mL/min.
Pressure:
4,300 psi (30 MPa)
Temperature: Ambient
Inj.Volume: 20 µL
2
4
6
MINUTES
8
Polystyrene Additives
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere 5 C18 (150 x 4.6 mm, 5 µm) (02580169)
Detection:
UV at 254 nm
Mobile Phase: Linear gradient of 25% acetonitrile/water to 100%
acetonitrile in 10 min.
Flow Rate:
3.0 mL/min.
Pressure:
3,200 psi (8 MPa)
Temperature: Ambient
Inj.Volume: 6 µL
10
www.perkinelmer.com/essentials
Peak Identification
1.Formic Acid
2.Acetic Acid
3.Propionic Acid
4.Butyric Acid
Pharmaceutical Applications
Peak Identification
1.Acetanilide
2.Prednisone
2.5 mg
Deltasone
Tablet
1.800.762.4000 US
1
Peak Identification
1.Acetaminophen
2.Caffeine
3.Salicylamide
4.Acetylsalicylic Acid
Standards
1
1
2
3
2
4
2
0
45 SECONDS
1
MINUTES
2
45 SECONDS
Analgesics in Tablets
Prednisone in Tablet Preparations
6
8
5
2
3
0
NH
CL
O
SO2NH2
Chlorthalidone
O
0.005 AU
CCA
CO2H
CL
SO2NH2
OCH3
NH
Impurity
7
1
OH
CBSA
4
CBSA O
CCA
Peak Identification
1.Norchlordiazepoxide
2.Chlorodiazepoxide
3.Oxazepam
4.Nordiazepam
5.Desalkyiflurazepam
6.Diazepam
7.Flurazepam
8.Prazepam
Chlorthalidone
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere 3 x 8 C18 (33 x 4.6 mm i.d.) (02580166)
Detection:
UV at 250 nm
Mobile Phase: 15% CH3CN in 0.1% H3PO4
Flow Rate:
2.0 mL/min.
Inj.Volume: 1 µL of tablet extract
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere 3 x 8 C18 (83 x 4.6 mm i.d.) (02580166)
Detection:
UV at 254 nm
Mobile Phase: 50/50 v/v methanol/water
Flow Rate:
2 mL/min.
Inj.Volume: 10 µL
ABSORBANCE (235 nm)
www.perkinelmer.com/essentials
LC-42
HPLC Applications
10
MINUTES
0
1
Benzadiazepines
CHROMATOGRAPHIC CONDITIONS
Column:
Brownlee RP-8 Spheri-5 (220 x 2.1 mm) (07110006)
Detection:
UV at 200 nm
Mobile Phase: A: 0.08% Diethylamine 0.08% Phosphoric Acid
90% Acetonitrile
B: 0.08% Diethylamine 0.09% Phosphoric Acid pH 2.3
Gradient:
5% A for 2 min.; 5% – 100% A in 15 min.; 100% A for 5 min.
Flow Rate:
0.5 mL/min.
Temperature: 50° C
2
3
MINUTES
Chlorthalidone HPLC Assay
CHROMATOGRAPHIC CONDITIONS
Column:
Reduced activity C18 (33 x 4.6 mm i.d.) (N9303395)
Detection:
UV at 235 nm
Mobile Phase: MeOH:H2O:HOAc (34:65:1)
Flow Rate:
1.5 mL/min.
Temperature: 30° C
CL
SO2NH2
HPLC Applications
LC-43
Pharmaceutical Applications
1.800.561.4646 Canada
Extracted Ion Chromatogram
4.66
Photolyte 2 MS
m/z = 332
290.2
4.51
m/z = 294
m/z = 308
m/z = 308
5.22
300
m/z,amu
4
Lomefloxacin MS
6
7
0
4.56 4.66 5.22
2
3
4
5
TIME,MINUTES
6
5
6
Phenothiazines
CHROMATOGRAPHIC CONDITIONS
Column:
Brownlee RP-8 Spheri-5 (220 x 2.1 mm) (07110006)
Detection:
UV at 200 nm
Mobile Phase: A: 0.08% Diethylamine 0.08% Phosphoric Acid 90%
Acetonitrile
B: 0.08% Diethylamine 0.09% Phosphoric Acid pH 2.3
Gradient:
5% A for 2 min.; 5% – 100% A in 15 min.; 100% A for 5 min.
Flow Rate:
0.5 mL/min.
Temperature: 50° C
CHROMATOGRAPHIC CONDITIONS
Column:
Reduced Activity C18 (33 x 4.6 mm, 3-µm) (N9303395)
Detection:
LC/MS with IonSpray (pneumatically assisted electrospray)
Mobile Phase: Solvent A: 95% water, 0.1% formic acid, 5% MeOH
Solvent B: 95% MeOH, 0.1% formic acid, 5% water
0-12% B (convex, program 4) in 5 min., hold 5 min.
Flow Rate:
1 mL/min. – split 65 mL/min. to MS, the rest to UV detector
Sample:
A partially degraded sample of Lomefloxacin (25 µg/mL)
after irradiation for 10 min. Note photolyte 2 is only
at ~0.5% level.
Clinical Sample
CBZE
Peak Identification
1.Procainamide
2.Acetylprocainamide
3.Nadolol
4.Lidocaine
5.Disopyramide
6.Propranolol
7.Nifedipine
CBZ
CHA (int.std.)
Standard
N
O
CONH2
N
10
MINUTES
7
The LC/MS Identification and Quantitation of Quinolone Antibiotic
Degradation Products
mAU (212 nm)
3
Lomefloxacin
Photolyte 2
Photolyte 3
Photolyte 1
308.2
300
m/z,amu
1
1
Total Ion Chromatogram
352.2
Intensity,cps
5
4
1
2
3
4
7
5
6
N
CONH2
CONH2
0
2
4
MINUTES
Carbamazepine in Serum
CHROMATOGRAPHIC CONDITIONS
Column:
Validated C18 (100 x 4.6 mm i.d.) (00402241)
Detection:
212 nm
Mobile Phase: 55% MeOH/H2O
Flow Rate:
1.0 mL/min.
Sample:
2 µL of standard at 10 ng/µL
2 µL of clinical serum extract
6
0
10
MINUTES
Cardiac Drugs
CHROMATOGRAPHIC CONDITIONS
Column:
RP-8 Spheri-5 (220 x 2.1 mm) (07110006)
Detection:
UV at 200 nm
Mobile Phase: A: 0.08% Diethylamine 0.08% Phosphoric Acid
90% Acetonitrile
B: 0.08% Diethylamine 0.09% Phosphoric Acid pH 2.3
Gradient:
5% A for 2 min.; 5% – 100% A in 15 min.; 100% A for 5 min.
Flow Rate:
0.5 mL/min.
Temperature: 50° C
www.perkinelmer.com/essentials
308.2
2
Peak Identification
1.Mesoridazine
2.Promazine
3.Thiothixene
4.Chlorpromazine
5.Trifluoperazine
6.Thioridazine
m/z = 352
www.perkinelmer.com/essentials
LC-44
HPLC Applications
Pharmaceutical Applications
1.800.762.4000 US
45
Peak Identification
1.Acetaminophen
2.Naproxen
3.Indomethacin
4.Phenylbutazone
5.Meclolenamate
3
2
Peak Identification
1.Chlorpheniramine
2.Diphenhydramine
3.Hydroxyzine
4.Meclizine
3
4
1
1
2
0
10
MINUTES
0
Analgesic/Anti-Inflammatory
CHROMATOGRAPHIC CONDITIONS
Column:
Brownlee RP-8 Spheri-5 (220 x 2.1 mm) (07110006)
Detection:
UV at 200 nm
Mobile Phase: A: 0.08% Diethylamine 0.08% Phosphoric Acid
90% Acetonitrile
B: 0.08% Diethylamine 0.09% Phosphoric Acid pH 2.3
Gradient:
5% A for 2 min.; 5% – 100% A in 15 min.; 100% A for 5 min.
Flow Rate:
0.5 mL/min.
Temperature: 50° C
Peak Identification
1.Estriol
2.ß-Estradiol
3.-Equilenin
4.Equilin
5.Estrone
1
10
MINUTES
Antihistamines
CHROMATOGRAPHIC CONDITIONS
Column:
Brownlee RP-8 Spheri-5 (220 x 2.1 mm) (07110006)
Detection:
UV at 200 nm
Mobile Phase: A: 0.08% Diethylamine 0.08% Phosphoric Acid
90% Acetonitrile
B: 0.08% Diethylamine 0.09% Phosphoric Acid pH 2.3
Gradient:
5% A for 2 min.; 5% – 100% A in 15 min.; 100% A for 5 min.
Flow Rate:
0.5 mL/min.
Temperature: 50° C
1
Peak Identification
1.Methylparaben
2.Ethylparaben
3.Propylparaben
4.Butylparaben
2
Standards
1
2
Handcream
3
4
5
3
4
3
10 MINUTES
Estrogenic Steroids
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere-3CR C18 (4.6 x 83 mm) (02580194) coupled
with a Pecosphere-3 x 3CR C18 (33 x 4.6 mm) (02580195)
Detection:
UV at 280 nm
Mobile Phase: 33/67 v/v ACN/(0.5 M Phosphate Buffer Monobasic,
0.1% TEA adjusted to pH 4)
Inj.Volume: 10 µL
0
30
SECONDS
0
30
SECONDS
Parabens in Hand Cream
CHROMATOGRAPHIC CONDITIONS
Column:
Pecosphere 3 x 3CR C18 (33 x 4.6 mm) (02580195)
Detection:
UV at 254 nm
Mobile Phase: 50/50 v/v Methanol/H20
Flow Rate:
3 mL/min.
Inj.Volume: 10 µL
LC Supplies and Accessories
PerkinElmer offers a variety of stainless steel, titanium,
and polymer based nuts, ferrules, unions, and tubing
for plumbing the components of your LC system.
For biocompatible applications, both plastic and Isopure
titanium fittings are available. PerkinElmer has created
a Biocompatible Column Fittings Kit which contains
fittings of various inert materials, such as PEEK and
Tefzel®.
LC Fittings Kits
Fittings Kit for LC
All-in-one fittings kit. The kit contains Rheodyne and
SSI nuts and ferrules as well as Fingertight II nuts and
ferrules for toolless installation. Zero-dead-volume and
low-dead-volume unions are also included. In addition,
you receive varying lengths of stainless steel tubing in
0.007 in. i.d.s and 0.010 in. i.d.s, as well as 0.030 in. i.d.
Tefzel tubing.
Part No.
N9301002
PEEK Union
The PEEK union allows you to connect two pieces of
1/16 in. tubing quickly and reliably. This union features
a .012 in. thru-hole of minimum length for the lowest
possible dead volume. Because this is a PEEK union,
it is absolutely inert and biocompatible. The PEEK union
comes without nuts.
Part No.
ED020008 (pkg.5)
PEEK One-piece
Fingertight™ Fittings
This PEEK Fingertight is the toughest in regard to chemical resistance and pressure. This high-performance
fingertight is recommended for the most demanding
applications and will resist pressures up to 6000 psi
(400 bar). The diameter of the head of the nuts has been
increased by 50% to give you power enough to tighten
without tools. The nut and ferrule are made from a
single piece of PEEK.
Part No.
ED020005 (pkg.10)
Nuts and Ferrules. Parker-Hannifin male nuts are 1/16 in.
Chemical Process Industry (CPI) standard nuts with
a 10-32 thread size. These fittings are found in most
connections in your PerkinElmer system. Rheodyne
nuts and ferrules connect 1/16 in. o.d. stainless steel
tubing to high-pressure injector valves. The thread
size is 10-32.
LC Fittings
Description
Parker-Hannifin Nut and Ferrule Kit, 1/16 in.; six of each
Qty.
Part No.
1
00890945
Biocompatible Column Fittings for LC
Recommended for users of a PerkinElmer Biocompatible
LC system. Contains nuts, ferrules, and unions.
Part No.
N9301001
Parker-Hannifin Ferrule, 1/16 in.
1
00873032
Parker-Hannifin Nut, 1/16 in.
1
09903980
SSI Nut and Ferrule Kit,1/16 in.: five nuts and 10 ferrules
1
02540273
Rheodyne Nut and Ferrule Kit, 1/16 in.: six ferrules, three short nuts, three long nuts.
1
02540274
Operation Kit
Recommended for purchasers of their first LC.
Includes tubing, union, fittings, syringe, basic
LC book, and test mix.
Part No.
00890873
Rheodyne Nut, 1/16 in.: long body
1
09904974
Rheodyne Nut, 1/16 in.: short body
1
09904956
Rheodyne Ferrule, 1/16 in.
1
09904947
Titanium Long Nut, 1/16 in.
1
N0911038
Titanium Short Nut, 1/16 in.
1
N0911028
Titanium Ferrule, 1/16 in.
1
N2601346
Fingertight II Male Nuts
10
N9301003
Fingertight II Ferrules
10
N9301004
Fingertight one-piece Nut and Ferrule
1
09920513
RheoFlex PEEK Nut and Ferrule Set
5
N9302676
RheoFlex PEEK Ferrules
5
N9302675
Tube Nut 410 Bio Pump
1
N2601149
Parker-Hannifin Zero-dead-volume Union, with nuts and ferrules
1
09903289
Swagelok Zero-dead-volume Union
1
09903807
Valco Nut, 1/16 in.
1
09903890
Valco Ferrule, 1/16 in.
1
09903891
www.perkinelmer.com/essentials
Stainless steel nuts are available in both ParkerHannifin and Rheodyne formats. The nuts are used to
connect 1/16 in. o.d. stainless steel tubing and feature
a 10-32 thread size. PerkinElmer also offers select SSI
fittings for 1/16 in. o.d. tubing in 1/4-28 thread size.
LC-45
Fittings
1.800.561.4646 Canada
LC-46
LC Supplies and Accessories
Tubing and Filtration Systems
www.perkinelmer.com/essentials
Clean-Cut™ For Cutting
Polymeric Tubing
The Clean-Cut is designed to cut Teflon,® Tefzel®,
and polymers in general, and PEEK capillary tubing
in particular. The compact design enables every chromatographer to carry it in his pocket. A unique safety
locking mechanism secures the blade when not in
use. Suitable for dimensions from 1/16 in. to 1/8 in.
Part No.
EDO20015 (pkg.1)
Replacement Blade
Part No.
ED020016 (pkg.10)
Tubing Plier
Solvent and Sample Filtration
For cutting 1/16 in. stainless steel capillaries. Annealed
jaws with plastic handles. Avoids distortion of o.d. and
closing the i.d.
Part No.
ED020017 (pkg.1)
All-glass Filter Apparatus
For solvent filtration.
Part No.
N9301063
Stainless Steel Tubing
SS-316 Tubing
1/16 in. o.d. x .043 in. i.d., 6 ft.
Part No.
00873035
PEEK Tubing
SS-316 Tubing
1/16 in. o.d. x .015 in. i.d., 6 ft.
Part No.
00873036
PEEK tubing has the strength required to withstand
continuous use at HPLC pressure without swelling or
bursting. The dense polymer structure of PEEK tubing
eliminates the permeability to organic solvents that
causes other polymer tubing, such as Tefzel to “sweat.”
SS-316 Tubing
1/16 in. o.d. x .007 in. i.d., 3 ft.
Part No.
02540838
Use PEEK tubing with virtually any organic or inorganic
liquid. PEEK tubing is not affected by halide salts, high
strength buffers or other aggressive mobile phases that
degrade stainless steel.
PEEK Tubing
1/16 in. o.d. x .010 in. i.d., 5 ft.
Part No.
N9302650
PEEK Tubing
1/16 in. o.d. x .007 in. i.d., 5 ft.
Part No.
N9302678
1.800.762.4000 US
SS-316 Tubing
1/16 in. o.d. x .007 in. i.d., 20 cm
Part No.
02711441
SS-316 Tubing
1/16 in. o.d. x .007 in. i.d., 50 cm
Part No.
00891480
Tefzel Tubing
1/16 in. o.d. x .030 in. i.d., 10 ft.
Part No.
N9301029
FP Vericel Hydrophilic Filters
For aqueous mobile phase, 47 mm, 0.45 µm.
Part No.
N9301067 (pkg.100)
PTFE Hydrophobic Filters
For nonaqueous mobile phase, 47 mm, 0.45 µm.
Part No.
N9301068 (pkg.100)
Sample Filter Assembly
Acro LC-13 13 mm, 0.45 µm, for common
reversed-phase solvents.
Part No.
02542783 (pkg.100)
Sample Filter Assembly
Acrodisk CR-13 13 mm, 0.45 µm, for THF, DMSO, etc.
Part No.
02542782 (pkg.100)
LC Supplies and Accessories
Rheodyne 7725 Injection Valve
The Model 7725 and 7725i are Rheodyne’s most
advanced sample injectors for analytical HPLC. They
can inject from 1 mL to 5 mL with high accuracy and
precision. These versatile injectors can use either of
two methods for loading the sample loop. The partialfilling method uses the syringe to measure the sample
volume. It lets you vary volume easily without having
to change the loop, and it does not waste any sample.
Any amount up to half the loop volume can be loaded.
The amount injected into the column is the exact
volume dispensed from the syringe. The completefilling method uses the loop to measure the volume.
It lets you load the loop without having to read syringe
calibrations carefully. Excess sample is required to
completely flush mobile phase from the loop. The
amount injected is the volume of the loop.
Flow switching occurs at a flat interface between
a polymeric rotor seal and a ceramic stator face.
This combination provides long seal life. In a clean
system, the 7725 typically can make more than
30,000 injections before requiring replacement
of the rotor seal.
The Models 7725 and 7725i are essentially identical,
but the latter has a built-in position sensing switch,
which can provide the chromatograph with a
reproducible start signal.
These models are new versions of the popular
Model 7125.
New features include:
■ Flow is not interrupted during switching, a benefit
when using flow-sensitive detectors, fragile columns,
or pumps that are disturbed by pressure transients.
A patented make-before-break or MBB™ passage
makes new connections before old ones break.
■ Wide port angles provide improved access to fittings.
■ A front-end pressure screw makes it easy to adjust
and maintain.
■ A 2 mL internal sample loop is available. The new
models use the same rotor seals as the 7125, but
sample loops and some other parts are not interchangeable. These injectors are set for 5000 psi
(345 bar, 34 MPa) and are adjustable to 7000 psi
(483 bar, 48 MPa). Maximum temperature is 80° C.
A 20 mL loop is attached when a complete valve
is purchased.
7725i Injection Valve with Internal Switch
For stand-alone use.
Part No.
N9306017
7725 Injection Valve
For use in the Series 200 Autosampler.
Part No.
N9306019
Rheodyne 9725
PEEK Injection Valve
The Model 9725 is highly inert and well suited to
the chromatography of biological molecules using
all techniques, including those with aggressive
mobile phases. It applies to both HPLC and soft
gel chromatography, and is also suitable for ion
chromatography, since metal does not contact the
mobile phase. This injector is identical to the Model
7725 stainless steel injector, but the materials are
different: the loop, nuts, ferrules, stator, and vent lines
are made of PEEK, polyetheretherketone; the rotor seal
polymer is Tefzel. PEEK has an outstanding combination
of strength and inertness. The operating pH range is 0
to 14. The injector is set for its maximum pressure capability, 5000 psi (345 bar, 34 MPa). However, useable
pressure may be lower, since the burst pressure of
the PEEK sample loop usually limits it. Maximum
temperature is 50° C. A 20 mL loop is attached.
The Rheodyne 9725 can quickly and easily be added
to the PerkinElmer Series 200 Autosampler, making
it an ideal sampling accessory for biochemistries.
The Series 200 Autosampler also supports Peltier
cooled sample trays for temperature labile samples
(see page LC-1).
9725 Injection Valve
For use in the Series 200 Autosampler.
Part No.
N9306020
Model 8125 Low-dispersion
Stainless Steel Injection Valve
Ideal for use in an LC/MS system, the Model 8125 is
designed for 1 mm and 2 mm microbore columns,
and can be used also with conventional analytical
columns (3 to 5 mm). It can inject sample volumes
from 0.1 mL to 500 mL with zero sample waste, using
the partial-filling method. Small flow passages produce
low dispersion, maintaining the high mass sensitivity
inherent in micro columns.
The 8125 Low-dispersion injector can quickly and easily
be added to the PerkinElmer Series 200 Autosampler,
thus making it an ideal choice as a LC/MS sampling
accessory.
8125 Injection Valve
Part No.
N9306021
7010 Rheodyne Injection Valve
The Model 7010 is a single-mode injector for the
complete-filling method of loading the sample loop.
You can achieve high precision without the need to
read syringe calibrations carefully. You should load
an excess of sample – at least two loop volumes –
to flush mobile phase from the loop. The 7010 can
also be used as a column-switching valve. The injector
ships with a 20 mL loop attached. Pressure is set for
5000 psi and is adjustable to 7000 psi. Rotor seal is
a Vespel polymer, which has an operating pH range
of 0-10.
7010 Injection Valve
Part No.
02540142
www.perkinelmer.com/essentials
The Rheodyne family of injection valves is
the recognized standard for sample injection.
PerkinElmer offers several Rheodyne models –
each tailored to a specific application or injection
volume range. Choose a manual injector if you
plan to inject samples by hand or simply select a
supported Rheodyne valve and quickly and easily
install it in our Series 200 Autosampler for highthroughput analysis. PerkinElmer also supplies
spare parts, syringes, and other consumable
items to keep your system up and running.
LC-47
Rheodyne Injection Valves
1.800.561.4646 Canada
LC-48
LC Supplies and Accessories
Rheodyne Injection Valves
1.800.762.4000 US
www.perkinelmer.com/essentials
Rheodyne Valves Spare Parts
Part
1
Handle Screw
2
Handle
3
Knob Assembly
4
Set Screws
5
Needle Guide
6
Body
7
Thrust Bearing
8
Rotor Pin
9
Seal Pins
10
Needle Port Tube
11
Bearing Ring
12
Isolation Seal
13
Rotor Seal
14
Stator Ring
15
Stator Face
Assembly
16
Set Screws
17
Stator
18
Stator Screws
Model 9725
Model 8125
N2931054
(for S200 Autosampler)
09904800
(Manual Valve)
09904805
Model 7010
Model 7125
Model 7725
N2931054
(for S200 Autosampler)
09904800
(Manual Valve)
09904800
(Manual Valve)
02541946
(for ISS-100)
N2931054
(for S200 Autosampler)
09904800
(Manual Valve)
09904805
09904805
09904805
09904963
09904802 (Vespel)
N9302677 (Tefzel)
N9306044 (PEEK)
10070900 (Vespel)
09904963
09904962
09904962
09904955 (Vespel)
09904802 (Vespel)
N9302677 (Tefzel)
N9306044 (PEEK)
09904802 (Vespel)
N9302677 (Tefzel)
N9306044 (PEEK)
09904801
N9306047
(PEEK and Ceramic)
09904953
(Stainless Steel)
N0911041 (Titanium)
N9306045
(Stainless Steel)
N9306047
(PEEK and Ceramic)
N9306046 (PEEK)
10071000
09904953
3
4
1
2
5
6
7
8
10
9
11
12
13
14
15
16
17
18
LC Supplies and Accessories
Stainless Steel Sample Loops for Rheodyne Injectors
Syringes are used for precise liquid delivery. Each
syringe is hand-fitted to assure maximum accuracy.
Our syringes are composed of glass barrels and precision
stainless steel needles. The needle features a blunt tip,
required for use with a Rheodyne injector.
Description
10 µL Syringe
Part No.
09904937
25 µL Syringe
Part No.
09904823
50 µL Syringe
Part No.
09904941
100 µL Syringe
Part No.
09904822
Rheodyne 22-gauge Blunt Needle
with Luer Hub
Part No.
09904943
PEEK Sample Loops
for Rheodyne Valves
PEEK Sample Loops avoid many of the problems
associated with stainless steel sample loops. Metal
loops will often absorb sample components resulting
in inaccurate quantitative results. In addition, metal
loops may be corroded by high-salt buffers and chloride
salts. Sample Loops are made from PEEK tubing and
fittings. PEEK (Poly-Ether-Ether-Ketone) is a mechanically strong, chemically inert polymer ideal for HPLC
applications where metal surfaces may interact with
mobile phase or sample components.
Each Sample Loop is supplied with two PEEK hex-head
nuts and ferrules. These fittings grip the tubing in two
locations for a more reliable connection.
Model 7125-7010
Part No.
Model 7725
Part No.
Model 8125
Part No.
5 µL Stainless Steel Sample Loop
09904827
N9306023
20143300
10 µL Stainless Steel Sample Loop
09904938
N9306024
20 µL Stainless Steel Sample Loop
09904939
N9306025
50 µL Stainless Steel Sample Loop
09904940
N9306026
100 µL Stainless Steel Sample Loop
09904942
N9306027
41000013
200 µL Stainless Steel Sample Loop
09904818
N9306028
09904818
500 µL Stainless Steel Sample Loop
09904819
N9306029
1 mL Stainless Steel Sample Loop
09904820
N9306030
2 mL Stainless Steel Sample Loop
N9306031
5 mL Stainless Steel Sample Loop
N9306032
PEEK Sample Loops for Rheodyne Injectors
Description
Model 9725
Part No.
5 µL PEEK Sample Loop
N9306033
10 µL PEEK Sample Loop
N9306034
20 µL PEEK Sample Loop
N9306035
50 µL PEEK Sample Loop
N9306036
100 µL PEEK Sample Loop
N9306037
200 µL PEEK Sample Loop
N9306038
500 µL PEEK Sample Loop
N9306039
1 mL PEEK Sample Loop
N9306040
2 mL PEEK Sample Loop
N9306041
5 mL PEEK Sample Loop
N9306042
Internal Loop for Models 7725/9725
Description
Part No.
2 uL (PEEK and Ceramic)
N9306022
10082600
www.perkinelmer.com/essentials
Microsyringes
(for Manual Injection)
LC-49
Rheodyne Injection Valves
1.800.561.4646 Canada
Index
Index
www.perkinelmer.com/essentials
IND-2
1.800.762.4000 US
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
00071006
IR-16
00402237
00473552
IR-16
02400115
01861854
IR-16
TEA-40,
TEA-43
02506517
GC-19,
GC-31,
GC-34,
GC-35,
GC-36,
GC-40
00402239
LC-29
ICP-5,
ICP-15,
ICP-19
01860954
00080100
LC-29,
LC-32
02400117
TEA-43
LC-29
ICP-8
IR-16
00402240
00473578
01861861
ICP-9,
ICP-10,
ICP-21
00402241
LC-29,
LC-43
01862082
IR-8
TEA-40,
TEA-43
GC-86
GC-98,
TEA-44
IR-16
02506518
00567300
01861862
02400119
02506519
ICP-15
01862289
IR-6
02400137
TEA-38,
TEA-39
02506532
AA-9
ICP-11,
ICP-15
AA-45
01862292
IR-6
02400642
TEA-42
02507907
AA-45
01862295
IR-6
02400815
TEA-43
AA-10,
AA-11,
AA-12
01862301
IR-8
02401028
01862812
IR-15
TEA-38,
TEA-39
TEA-23,
TEA-27,
TEA-29,
TEA-30,
TEA-32
02160061
TEA-2
02401042
02507987
AA-10
02190041
TEA-2,
TEA-3,
TEA-6
TEA-38,
TEA-39
02401092
TEA-43
02507999
IR-13
02401117
TEA-43
02401118
TEA-43
02401119
TEA-40,
TEA-43
00090038
00090652
00090699
GC-85
00402243
LC-29
00570194
GC-18,
GC-20
00403058
LC-29
00570559
00470258
AA-45
00570567
00470385
AA-9
00570948
LC-2
00090709
TEA-42
00470391
AA-11
00091059
GC-20
00470551
ICP-15
00570957
AA-13
00570984
AA-10,
AA-11
00091216
GC-85
00470608
ICP-15
00091279
GC-32,
GC-33
00470652
AA-44,
ICP-6
00091357
GC-20
00470690
ICP-16
00091360
GC-85
00470781
ICP-22
00091667
GC-35
00470988
00097993
GC-12
AA-10,
AA-11
00200239
LC-11
00471420
00200240
LC-11
AA-24,
ICP-24
00230090
LC-12,
GC-85
00471422
00471440
AA-10,
AA-11
00572616
AA-11
00572624
AA-10,
AA-11
00572737
AA-11
AA-23,
ICP-23
00603861
LC-11
00873032
LC-45
AA-23,
ICP-23
00873035
LC-46
AA-10,
AA-11
00873036
LC-46
00879078
LC-6,
LC-8,
LC-9,
LC-10
AA-24,
ICP-24
GC-85
00230113
GC-88
00230253
GC-85
00230522
GC-86
00230523
GC-88
00231252
GC-98
00472020
ICP-3
00231255
GC-98
00472022
ICP-3
00400266
AA-11
00472033
00400275
AA-11
ICP-13,
ICP-14,
ICP-16
00400276
AA-11
00400277
AA-11
00400289
AA-11
00401577
LC-11
00401578
LC-11
00401738
TEA-44
00401740
GC-98,
TEA-44
00401741
00401742
GC-98,
TEA-44
GC-98,
TEA-44
00472014
AA-10,
AA-11,
AA-12
00572615
00230091
00471441
00572561
ICP-11
02508063
IR-9,
IR-12,
IR-13,
IR-19
02190042
TEA-2,
TEA-3
02190045
TEA-10
02190048
TEA-2,
TEA-3
02401120
TEA-40,
TEA-43
02508065
IR-13
02509115
ICP-6
02190061
TEA-2,
TEA-4,
TEA-7,
TEA-15,
TEA-42
02401121
TEA-40,
TEA-43
02540142
LC-47
02401286
TEA-42
02540176
02401291
TEA-41
LC-8,
LC-9,
LC-10
TEA-2,
TEA-4,
TEA-6,
TEA-42
02401293
TEA-41
02540177
02401294
TEA-41,
TEA-44
LC-7,
LC-10
02540197
LC-7,
LC-8,
LC-9,
LC-10
02540272
LC-6,
LC-8,
LC-9,
LC-10
02190062
02190071
TEA-18
02190080
TEA-2,
TEA-6,
TEA-4,
TEA-15
02401296
TEA-42
02401344
TEA-43
02401362
TEA-40,
TEA-43
02401583
TEA-38,
TEA-39
00890873
LC-45
00890945
LC-45
02190136
TEA-10
02402087
TEA-41
TEA-41
LC-45
LC-11
02402089
02540274
00903078
TEA-31,
TEA-32
LC-45
LC-46
02190218
02540273
00891480
TEA-35
02190323
TEA-29
02450972
GC-84
02540275
01541498
01591003
TEA-44
02191171
TEA-3
02505798
GC-86
LC-8,
LC-9,
LC-10
02191269
TEA-32
02505799
GC-86
02540311
LC-12
02191295
TEA-4
02506483
LC-12,
GC-86,
ICP-8
02540347
LC-10
02540422
LC-5
02540581
LC-5
02540582
LC-4,
LC-5
02540838
LC-46
00473052
ICP-16
00473189
ICP-22
00473194
ICP-9,
ICP-10
00473292
ICP-13,
ICP-18
01591004
GC-98,
TEA-44
ICP-8
01651050
TEA-44
02191296
TEA-4
00473543
ICP-8,
ICP-22
01860436
IR-6
02191858
TEA-32
01860449
IR-8
02200550
IR-5
00473550
ICP-5,
ICP-15,
ICP-19
01860470
IR-8
02400011
TEA-36
01860794
IR-15
02400084
TEA-33
IR-16
02400085
TEA-33
00473539
02508059
01860796
02506495
LC-3,
LC-4
02506516
ICP-9,
ICP-10,
ICP-21
Index
IND-3
1.800.561.4646 Canada
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
02540871
LC-6,
LC-8,
LC-9,
LC-10
02711340
LC-16
03031910
03300796
GC-24
03321911
GC-98
04967843
IR-8
02711441
LC-46
AA-45,
ICP-5
03300806
GC-85
04967845
LC-16
03031911
ICP-5
LC-2,
GC-87
03328000
02711560
03501646
FLR-23
IR-4,
IR-8
02541946
LC-48
02711763
LC-16
03031920
AA-13
03300865
GC-42
03920005
LC-11
04967854
IR-8
02542076
LC-7,
LC-8,
LC-9,
LC-10
02711797
LC-16
03033124
AA-13
03300866
GC-42
04020041
LC-11
04969486
LC-16
03190021
TEA-4
03300904
04030126
LC-11
FLR-23,
LC-15
02712224
LC-16
03190024
04190117
TEA-22
04970343
GC-9,
GC-12
02712231
LC-16
TEA-2,
TEA-3
GC-15,
GC-18
TEA-22
04970573
IR-13
LC-16
TEA-2,
TEA-3
04190119
02712266
03190025
04190163
TEA-22
04970839
IR-13
02712273
LC-15
04190165
TEA-22
LC-7,
LC-8,
LC-9,
LC-10
04971726
LC-5
02900526
ICP-27
04190166
TEA-22
04971733
GC-33
02900540
AA-51
04972066
GC-13
02901518
AA-9
TEA-22,
TEA-31
04972383
02542651
LC-5
02901624
TEA-35
GC-9,
GC-12
02542750
LC-5
03030130
AA-11,
AA-12
02542149
02542313
LC-8,
LC-9,
LC-10
02712155
02542782
LC-46
02542783
LC-46
03030135
AA-15
LC-28,
LC-37,
LC-40
03030152
AA-46
03030299
AA-13
03030313
ICP-5
03030314
ICP-5
03030352
AA-13
03030353
AA-14
03030354
AA-13
02580164
02580166
02580167
02580169
LC-28,
LC-38,
LC-39,
LC-41,
LC-42
LC-28,
LC-37,
LC-38
LC-28,
LC-36,
LC-39,
LC-41
03030402
AA-13
03030404
AA-13
03030405
AA-15
03030406
AA-45,
ICP-5
03190026
03190029
TEA-2,
TEA-3
TEA-2,
TEA-4
GC-24
03302676
GC-38,
GC-39
04190217
TEA-22
03302775
GC-42
04190276
TEA-8
04972392
GC-84
03302777
GC-42
04190299
TEA-10
04973263
LC-15
03302778
GC-42
04190367
TEA-8
04973727
GC-12
03302976
GC-42
04190387
TEA-22
04973736
LC-5
03302989
GC-43
04190388
TEA-22
04973737
LC-5
03303455
GC-23
04191228
TEA-22
04974018
GC-13
TEA-22
04974155
FLR-26
03190034
TEA-10
03190035
TEA-10
03190036
TEA-10,
TEA-32
03190062
03190205
TEA-10
03303456
GC-23
04191290
TEA-9
03303472
GC-23,
GC-24
04191291
TEA-22
04974414
GC-14
04191577
TEA-8
03303474
GC-23
04977032
IR-6
04191758
TEA-5
03303475
GC-23
04977042
IR-6
04191759
TEA-5
03303477
GC-24
04977043
IR-8
04191760
03303500
GC-24
TEA-2,
TEA-5
04978064
GC-9
03303598
GC-42
04191761
IR-6
03303599
GC-42
TEA-2,
TEA-5
04978444
04978499
03303611
GC-24
04191838
TEA-22
FLR-22,
FLR-25
IR-18
GC-23
TEA-22
04978581
03303614
04191839
GC-28
IR-18
GC-23
04308523
04978582
03303616
03303617
GC-23
04308554
LC-20
03303618
GC-23
04800514
IR-6
03303632
GC-23
04810949
IR-6
03303773
GC-42
04820519
IR-6
03305177
GC-18
04821008
03305179
GC-18
IR-2,
IR-3
03305180
GC-18
04821131
03305181
GC-18
03305274
GC-18
03320134
03190206
TEA-9
03190207
TEA-9
03190208
03190218
TEA-9
TEA-2,
TEA-4,
TEA-6
03190236
TEA-4,
TEA-10
03030793
AA-8
03190253
TEA-16
03030952
AA-8
03190264
TEA-16
LC-28,
LC-44
03030972
AA-8
03190265
TEA-16
03030997
AA-8
03190461
TEA-31
02580202
LC-28
03030998
AA-8
03191024
TEA-8
02580203
LC-28
03031456
AA-14
03191047
TEA-4
02580213
LC-28
03031460
AA-14
03191527
TEA-9
02639505
FLR-28
03031573
AA-12
03191705
TEA-31
02639507
FLR-28
03031802
AA-14
03191719
TEA-9
02639508
FLR-28
03031806
AA-14
03191720
TEA-9
02639509
FLR-28
03031808
AA-14
03220067
TEA-14
02639510
FLR-28
03031810
AA-13
03220068
TEA-14
02710098
LC-16
03031812
AA-14
03300517
GC-20
02580195
03302448
04190197
TEA-10,
TEA-32
TEA-9
LC-28,
LC-44
GC-23,
GC-24
TEA-10
03190247
02580194
03302339
GC-20
03190033
AA-8
LC-28
03302243
03190031
AA-13
02580192
GC-20
TEA-10
03030791
LC-28
GC-18
03302221
03190030
03030433
02580191
03300905
04978590
IR-18
04994506
IR-7
04994507
IR-7
05540110
LC-11
05550049
LC-11
06530069
LC-11
IR-2,
IR-3
06530085
LC-11
06540046
LC-11
04821132
IR-2,
IR-3
07110001
LC-26
07110002
LC-26
GC-24
04960691
IR-8
07110003
LC-26
03320146
GC-20
04964467
07110004
LC-26
03321910
GC-98
GC-10,
GC-12
www.perkinelmer.com/essentials
Part No.
Index
www.perkinelmer.com/essentials
IND-4
1.800.762.4000 US
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
07110005
LC-26
07110077
LC-26
07110236
LC-26
07150029
09902163
ICP-11
LC-26,
LC-42,
LC-43,
LC-44
07110085
LC-26,
LC-40
07120001
LC-34
TEA-16,
TEA-17
09903428
07110006
LC-28,
LC-33
09903434
TEA-36
07120005
LC-34
07150030
LC-28,
LC-33
09902188
TEA-38
09903471
09902205
TEA-10
07150031
LC-33
09902206
TEA-10
TEA-33,
TEA-36,
ICP-8
07150032
LC-33
09902207
09903606
LC-12
09111227
LC-11
ICP-9,
ICP-10
07110013
LC-26
07110014
LC-26
07110015
LC-26
07110016
LC-26
07110017
LC-26,
LC-39
07110086
LC-32
07120012
LC-34
07110087
LC-26
07120016
LC-34
07110088
LC-32
07120019
LC-34
07110089
LC-26,
LC-36,
LC-40
07120023
LC-34
07120033
LC-34
07110090
LC-32
07120040
LC-34
07110091
LC-26,
LC-40
07120073
LC-34
07120096
LC-34
09421005
TEA-44
09902239
AA-14
ICP-22
09902240
AA-10,
AA-11
09902245
TEA-22
09902247
GC-40,
ICP-7,
ICP-9,
ICP-10,
ICP-11,
ICP-13
09903771
LC-12
09903795
GC-85
09903799
AA-37
09902473
AA-15
09903807
LC-45
LC-7,
LC-8
09903011
TEA-15
09903890
LC-45
ICP-8,
ICP-22
09903021
ICP-10
09903891
LC-45
09903087
TEA-36
09903906
LC-12
09903094
ICP-9,
ICP-10,
ICP-11,
ICP-13
09903915
GC-84
09903980
LC-45
09903981
GC-84
LC-26
07110093
LC-26
07120099
LC-34
09902005
AA-14
07110021
LC-26
07110095
07150001
LC-26
LC-30,
LC-33
09902006
07110022
LC-26,
LC-40
ICP-7,
ICP-13
LC-26
07110096
LC-32
07150002
LC-33
09902007
GC-23
LC-26
07110098
LC-32
07150004
LC-31,
LC-33
09902009
GC-23
07110029
LC-26
07110104
LC-32
LC-32
07150005
07150006
LC-33
07150011
LC-32
07150012
LC-32
07150013
LC-26,
LC-30,
LC-33
LC-26
07110105
07110032
LC-26
07110106
07110033
LC-26
07110108
07110035
LC-26
07110114
LC-31
07110037
LC-26
07110115
LC-26
07110039
LC-26
07110117
LC-26
07110041
LC-26
07110119
LC-26
07110043
LC-26
07110121
LC-26
07110045
LC-26
07110123
LC-26
07110047
LC-26
07110145
LC-26
07110055
LC-26
07110163
07110056
LC-26
07110164
LC-31
07110057
LC-26
07110165
LC-31
07110058
LC-26
07110166
07110059
LC-26
07110189
LC-31
07150020
LC-33
07110060
LC-26,
LC-36
07110190
LC-31
07150021
LC-33
07110191
LC-31
07150022
LC-33
LC-32
LC-31
LC-31
LC-31
07150014
07150015
07150016
LC-33
07110061
LC-26
07110192
LC-31
07150023
07110062
LC-26
07110231
LC-26
07150024
LC-32
07110064
LC-26
07110232
LC-26
07150025
LC-33
LC-32
LC-28,
LC-33
LC-26
07110233
LC-26
07110074
LC-26
07110234
LC-26
07150028
07110075
LC-26
07110235
LC-26
TEA-39
09902048
TEA-39
AA-14,
TEA-10
09903103
ICP-8
09903997
LC-11
09902123
TEA-39
09903104
ICP-8
09903999
ICP-11
09902128
LC-7,
LC-8,
LC-9,
LC-10
09903128
GC-17,
GC-85
09904800
LC-48
09904801
LC-48
09903129
GC-85
09904802
LC-48
09902131
TEA-16,
TEA-17
09903130
GC-85
09904805
LC-48
09903170
GC-85
09904818
LC-49
09902133
TEA-39
09903173
ICP-22
09904819
LC-49
09902143
GC-31
09903196
09904820
LC-49
09902147
AA-10,
AA-11
TEA-33,
TEA-36
09904822
09903199
ICP-8
LC-49,
GC-88
09902151
ICP-22
09903212
GC-85
09904823
09902152
ICP-13,
ICP-14
09903289
LC-3,
LC-45
LC-49,
GC-88
09904827
LC-49
09902155
ICP-7,
ICP-9,
ICP-10,
ICP-13,
ICP-14
09903392
GC-15,
GC-20,
GC-82
09904845
AA-44,
ICP-5
09904846
09903394
GC-84
09903395
GC-84
AA-44,
ICP-5,
ICP-6
LC-29,
LC-33
LC-29,
LC-33
AA-15,
ICP-9,
ICP-11
09902035
LC-26,
LC-33
07150018
07110073
09902033
09902102
LC-33
07150026
09902018
LC-26,
LC-33
07150017
07150019
09902015
LC-31,
LC-33
07110031
LC-32
GC-20,
GC-27,
GC-82,
GC-84
AA-10,
AA-11
07110020
LC-32
09903739
09902236
09902001
07110102
GC-5,
GC-84
LC-13,
LC-23
LC-34
LC-26
09903700
09410036
07120097
07110027
TEA-41
ICP-13
LC-32
LC-32
09903673
AA-11
09902225
07110092
07110100
TEA-41
09902219
LC-23
LC-26
LC-26
09903665
LC-23
07110019
07110025
IR-13,
LC-3,
LC-12
09410020
LC-26
07110024
LC-12
09903615
09410015
07110018
07110023
09903610
Index
IND-5
1.800.561.4646 Canada
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
09904849
LC-6,
LC-8,
LC-9,
LC-10
09907328
LC-7,
LC-8,
LC-9,
LC-10
09908825
TEA-32
09920391
LC-3
09923219
LC-3
09938906
LC-15
09908851
GC-10,
GC-12
09920404
TEA-39
09923270
LC-3
09938910
09920429
LC-3
09923304
LC-3
LC-6,
LC-10
09911186
TEA-23,
TEA-26,
TEA-28
09920454
IR-13
09923305
LC-3
09938912
LC-3
09920511
GC-27,
GC-84
09923306
LC-3
09938914
LC-14
09923307
LC-3,
IR-19
09939731
LC-10
09940438
09923366
LC-7,
LC-8
ICP-9,
ICP-10
09972321
09923367
LC-7,
LC-8
GC-40,
GC-41
09972337
FLR-27,
FLR-28,
LC-15
09980935
AA-45,
ICP-5
09981785
TEA-16,
TEA-18
09904937
LC-49
09904938
LC-49
09904939
LC-49
09904940
LC-49
09904941
LC-49,
GC-88
09904942
LC-49
09904943
LC-49
09904947
LC-45
09904953
LC-48
09904955
LC-48
09904956
LC-45
09904962
LC-48
09904963
LC-48
09904974
LC-45
09904991
ICP-4,
ICP-15
09905147
09905932
09907120
09907122
09907126
TEA-9,
ICP-18,
ICP-20
TEA-15,
TEA-18
09907331
09907338
09907339
09907345
LC-13,
LC-14,
LC-16,
LC-17
09907127
GC-85
09907128
GC-85
09907204
TEA-44
09912223
GC-32
LC-7,
LC-8
09920021
ICP-10
09920034
ICP-10
LC-7,
LC-8,
LC-9,
LC-10
09920104
GC-5,
GC-27,
GC-29,
GC-30,
GC-84
LC-7,
LC-8,
LC-9,
LC-10
09907377
GC-41
09907504
TEA-8
09907827
GC-31
09907998
TEA-35
09908138
TEA-10,
TEA-14,
TEA-15,
TEA-42
09908265
AA-15,
ICP-5,
ICP-8,
ICP-15
09908396
TEA-14
09908397
TEA-14
09908400
09908467
09907236
TEA-22
09907266
GC-85
09908522
09907281
TEA-32
09908587
09907324
LC-7,
LC-8,
LC-9,
LC-10
09920105
09920107
GC-22
09908134
AA-44,
ICP-5
AA-44,
ICP-5
LC-7,
LC-8,
LC-9,
LC-10
GC-30,
TEA-14,
TEA-15,
TEA-22,
TEA-32,
TEA-42
09920118
09920123
09920124
09920127
ICP-4,
ICP-6,
ICP-15,
ICP-19
09908689
TEA-17
09908733
ICP-16
GC-19,
GC-20,
GC-27,
GC-29,
GC-30,
GC-82,
GC-84
09920381
09920382
09920516
ICP-22
09920517
ICP-22
09923454
TEA-35
09920518
ICP-8,
ICP-22
09923464
AA-44
09923490
GC-27
09920528
ICP-10
09923491
GC-27
09920535
IR-9,
IR-12,
IR-13,
IR-19
09923492
GC-27
09923493
GC-27
09985514
ICP-10
09923504
GC-27
09985708
IR-9,
IR-12,
IR-13,
IR-19
09926083
AA-15
09926098
IR-13,
IR-19
09934468
GC-28
AA-15,
GC-86,
ICP-5,
ICP-8,
ICP-15,
ICP-22
09934469
GC-28
09985727
ICP-10
09934470
GC-28
09985729
09934472
GC-28
ICP-10,
ICP-11
09935404
GC-6
09986072
ICP-11
09936092
ICP-11
09988015
TEA-18
09936189
LC-13,
LC-17
09988017
TEA-18
09920536
09920546
ICP-8
09920593
GC-9
LC-5,
AA-26
09920672
LC-3
09920864
GC-27
LC-5,
AA-26
09921003
ICP-22
09921004
GC-17
09921018
TEA-22
09921019
TEA-22
09921028
ICP-10
09921037
IR-13
09921044
AA-10
09921045
ICP-8,
ICP-22
GC-5,
GC-29,
GC-84
GC-19,
GC-20,
GC-82,
GC-84
09920301
ICP-8,
ICP-22
ICP-9,
ICP-10
09920141
09920262
09920515
ICP-8
GC-15,
GC-84
09920186
LC-3,
LC-45
09920545
09920140
TEA-2,
TEA-4
ICP-10
GC-15,
GC-27,
GC-29,
GC-30,
GC-84
09920513
09989859
ICP-16
09991413
LC-22,
GC-46
09991414
LC-22,
GC-46
09991415
LC-22,
GC-46
09991416
LC-22,
GC-46
09936341
GC-28
09936442
GC-27
09936504
LC-13
09937082
LC-8,
LC-10
09937083
LC-16
09937138
TEA-14
09937169
LC-9,
LC-10
09991417
LC-22,
GC-46
ICP-8,
ICP-11
09923012
ICP-10
09923027
TEA-8
ICP-11,
ICP-12
09923031
GC-87
09937220
LC-16
09991463
GC-27
09923032
GC-87
09938559
09992731
ICP-6
09923049
TEA-7
09995098
LC-3
09923078
GC-29
GC-36,
GC-38,
GC-40
ICP-5,
ICP-6
LC-3
09923133
AA-14,
AA-15
09997196
LC-23
09998293
GC-27
GC-15,
GC-17
09938727
LC-14
09938859
AA-46
www.perkinelmer.com/essentials
Part No.
Index
www.perkinelmer.com/essentials
IND-6
1.800.762.4000 US
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
10000079
LC-17
29000545
52126271
FLR-23
90061001
UV-19
B0104241
GC-3
LC-48
54019985
GC-20
LC-22,
GC-46
B0080171
10070900
LC-13,
LC-17
B0080333
AA-26
B0104242
GC-3
LC-11
54120790
GC-9
B0008754
FLR-29
B0080819
UV-6
B0104243
GC-3
60000186
LC-13,
LC-17,
LC-18
B0017047
FLR-29
B0080821
UV-6
B0104244
GC-3
B0017052
FLR-29
B0080822
UV-6
B0104342
AA-19
B0017054
FLR-29
LC-13,
LC-17,
LC-18
B0080850
AA-19
B0105111
ICP-25
B0017057
FLR-29
B0084183
AA-17
AA-26,
AA-38
UV-11,
UV-19
B0105197
B0017998
B0105973
LC-4,
LC-5,
AA-22
B0105974
LC-4,
LC-5,
AA-22
10071000
LC-48
29000570
10082600
LC-49
41000013
LC-49
LC-11
51000634
IR-7
LC-11
51000635
IR-7
14001970
LC-11
51000636
IR-7
20143300
LC-49
51000637
IR-7
LC-18
51000638
IR-7
60000393
LC-18
24500213
LC-18
51000639
IR-7
60000394
LC-18
25000323
LC-13,
LC-17,
LC-18
51000817
IR-7
60000542
LC-18
51001135
IR-2
60365000
LC-11
51001137
IR-2
LC-13,
LC-17,
LC-18
65105001
51001140
IR-2
LC-23,
GC-48
51001141
IR-2
LC-17
51001144
IR-6
LC-13,
LC-17
51001148
IR-6
51001149
IR-6
14001579
14001580
24500210
25000376
25000536
26000050
27000087
LC-13,
LC-17,
LC-18
27000098
LC-18
27000099
LC-18
29000072
LC-17
29000078
LC-13,
LC-17,
LC-18
29000146
29000152
LC-17,
LC-18
LC-13,
LC-17,
LC-18
60000366
B0086703
UV-18
AA-40,
AA-41,
AA-42,
ICP-11
B0087056
AA-22
B0087354
AA-35
B0087600
AA-22
B0022438
FLR-29
B0089439
UV-7
B0107593
FLR-29
B0023365
FLR-29
B0091504
B0109322
AA-16
LC-23,
GC-48
B0023491
FLR-29
AA-17,
ICP-25
FLR-29
UV-19
AA-16
B0023492
B0091906
B0109324
65105204
LC-23,
GC-48
LC-5
UV-11,
UV-17
B0092456
65105408
LC-23,
GC-48
AA-26,
AA-38,
ICP-5,
ICP-6
B0092449
B0109944
B0029792
LC-4,
LC-5
B0112657
AA-16
B0092468
LC-4,
LC-5
B0114620
UV-19
B0115576
AA-19
65105102
B0018283
51001152
IR-6
51001188
IR-7
65204001
LC-23
B0029796
AA-43
51001189
IR-8
65204101
LC-23
B0041693
FLR-29
B0094032
AA-35
B0116823
AA-18
51001324
IR-7
65204501
GC-48
B0045095
AA-14
B0094138
AA-35
B0118468
LC-5
AA-22
51001325
IR-7
65400500
GC-48
B0045472
AA-38
B0094140
AA-35
B0119079
51001326
IR-7
65400600
GC-48
B0046948
AA-42
B0094321
AA-35
B0120242
AA-17
51001327
IR-7
65400700
GC-48
B0047207
B0094413
AA-35
B0121084
51001328
IR-7
65400800
GC-48
AA-10,
AA-12
B0094415
AA-35
LC-4,
LC-5
51001329
IR-7
65605810
GC-48
B0047209
AA-19
B0097693
AA-35
B0127014
AA-9
51002592
IR-6
65605825
GC-48
B0048139
B0097694
AA-35
B0127431
AA-18
51002593
IR-6
65607610
GC-48
B0098258
AA-18
B0128495
AA-18
51012725
IR-7
65607625
GC-48
AA-23,
AA-40,
AA-42,
ICP-23
B0098452
AA-35
B0129258
AA-21
B0129303
AA-22
B0131352
GC-7
B0131355
GC-7
B0131382
GC-7
B0131385
GC-5,
GC-7
LC-13,
LC-17
52001535
IR-5
65609010
GC-48
B0049642
LC-5
B0098453
AA-35
52001539
IR-5
65609025
GC-48
B0057410
AA-14
B0098640
AA-35
29000286
LC-17,
LC-18
52001543
IR-5
65900805
GC-48
B0062566
IR-6
B0098799
FLR-29
29000307
LC-11
52001551
IR-5
72000008
LC-13,
LC-17,
LC-18
B0066549
AA-19,
AA-36,
AA-42,
TEA-11
B0098800
FLR-29
B0101045
AA-21
B0101161
AA-21
B0131410
GC-7
B0070126
AA-41
B0101164
AA-21
B0131413
GC-7
B0070699
AA-17
B0102332
AA-21
B0132799
AA-21
B0071145
AA-19
B0103037
AA-21
B0133956
B0071519
UV-14,
UV-18
B0104236
GC-3
LC-4,
LC-5
B0104239
GC-3
B0135653
B0080112
AA-17
B0104240
GC-3
AA-17,
ICP-25
29000197
29000324
LC-17,
LC-18
29000416
LC-18
29000484
LC-18
29000493
LC-18
29000542
LC-13,
LC-17
29000544
LC-13,
LC-17
52019600
FLR-23
52123130
FLR-26,
FLR-28
52123164
52123814
52124965
52126027
FLR-26,
FLR-28
72000060
72000062
72000087
FLR-26,
FLR-28
85090101
FLR-23
90060001
FLR-27
LC-11
LC-11
LC-11
LC-22,
GC-46
LC-22,
GC-46
Index
IND-7
1.800.561.4646 Canada
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
B0137111
AA-16
B0152471
UV-6
B0181350
AA-40
B0193160
B0197391
GC-6
B0501000
B0137112
AA-16
B0152473
LC-4
B0181354
AA-38
AA-37,
AA-40
B0198005
AA-20
B0193161
AA-37,
AA-40,
AA-41
B0198016
LC-4
AA-36,
AA-40,
AA-41
B0198017
LC-4
B0501022
AA-13
B0198023
UV-11,
UV-17
B0501025
AA-13
UV-18,
AA-23,
ICP-23
B0501026
AA-13
B0198030
TEA-11
B0501029
AA-13
B0198072
AA-20
B0501044
B0198093
TEA-42
AA-24,
ICP-24
B0198097
AA-38,
AA-40,
AA-42
B0501056
AA-23,
ICP-23
B0501236
AA-20
B0501252
AA-20
B0501258
AA-38,
AA-41
AA-23,
ICP-23
B0501282
UV-14
B0137314
UV-13,
UV-18
B0152474
LC-4
B0181576
TEA-11
B0152476
LC-4
B0182864
B0138618
TEA-12
B0155481
ICP-25
TEA-2,
TEA-5
B0139005
TEA-2,
TEA-6,
TEA-7,
TEA-15
B0155546
AA-12
B0156094
AA-6
B0157117
AA-12
B0139033
TEA-6
B0158598
AA-12
B0139038
TEA-6
B0158616
AA-12
B0139120
TEA-12
B0158690
AA-12
B0182905
TEA-5
B0139122
TEA-12
B0159356
GC-3
B0182981
TEA-12
B0182901
TEA-2,
TEA-5
B0182902
TEA-2,
TEA-5
B0182903
TEA-2,
TEA-5
B0193233
B0193234
B0193235
B0193342
UV-18,
AA-23,
ICP-23
UV-18,
AA-23,
ICP-23
AA-37,
AA-39,
AA-40,
AA-41
B0198099
AA-38,
AA-41
B0139997
ICP-25
B0159357
GC-3
B0184142
GC-6
B0142511
TEA-12
B0160917
TEA-5
TEA-12
UV-19,
LC-16
B0185054
B0142512
B0185163
UV-7
B0143003
TEA-6
B0162668
AA-12
B0185227
UV-19
B0193766
LC-4
B0198104
AA-41
B0501315
AA-39
B0143004
TEA-6
B0162669
AA-12
B0185259
LC-4
B0193768
UV-7
B0198110
B0501373
AA-40
B0143005
TEA-6
B0162671
AA-12
B0185320
LC-4
B0193772
AA-37,
AA-40
GC-3,
GC-5,
GC-7
B0143015
B0143016
B0143017
B0143018
B0143019
B0143021
B0143024
TEA-2,
TEA-6
B0162836
LC-4
B0185480
LC-4
B0165332
AA-15
B0185481
LC-4
TEA-2,
TEA-6
B0166569
GC-6
B0186924
TEA-11
B0169319
TEA-2,
TEA-6
B0187028
UV-19
TEA-2,
TEA-6
B0187258
AA-40
B0190034
UV-11
TEA-2,
TEA-6
B0190634
AA-17,
AA-50
LC-4,
LC-5
B0190635
LC-4,
LC-5
B0190672
AA-15
B0191058
AA-38,
AA-40,
AA-41,
AA-42
TEA-2,
TEA-6
TEA-2,
TEA-6
TEA-2,
TEA-6
TEA-2,
TEA-6
TEA-2,
TEA-6
B0143263
TEA-12
B0144169
GC-5,
GC-7
B0144637
TEA-6,
TEA-7,
TEA-15
B0169320
B0169321
B0170873
B0170875
B0173402
LC-16
B0173404
AA-12
B0174378
AA-15
B0180361
AA-18
B0180363
AA-18
B0180367
TEA-11
B0146340
TEA-6
B0180378
TEA-11
B0147449
GC-7
B0180379
TEA-11
B0148615
AA-9
B0180380
TEA-11
B0148651
AA-14
B0180381
TEA-11
B0151573
AA-12
B0180382
TEA-11
B0151579
AA-12
B0180383
TEA-11
B0151737
GC-4
B0181295
UV-11
B0191059
B0191060
B0191090
B0191144
B0191766
AA-17,
AA-50
AA-37,
AA-38,
AA-40,
AA-41,
AA-42
AA-24,
AA-38,
AA-40,
ICP-24
UV-17
B0501377
GC-3
B0501580
AA-39,
AA-41
B0501594
AA-38,
AA-41
B0198111
AA-40,
AA-41
B0198180
LC-4
B0198201
AA-39,
AA-41
B0501595
AA-41
B0199034
UV-17,
AA-37,
AA-40
B0502195
AA-32
B0502196
AA-32
B0502197
AA-36,
AA-40
B0199035
AA-39
AA-30,
AA-32
B0199233
AA-39
B0502201
AA-31
B0196704
AA-39,
AA-41
B0199379
TEA-7
B0502202
AA-31
AA-40
AA-31
AA-39,
AA-41
B0199417
B0502203
B0196850
B0500695
AA-41
B0502204
AA-31
B0502706
AA-20,
AA-41
B0502921
AA-38
B0502923
AA-38
B0502924
AA-38
B0502925
AA-38
B0193780
LC-4,
LC-5
B0193793
AA-41
B0193796
LC-4
B0193873
AA-39
B0194048
AA-36,
AA-40
B0194049
B0196857
AA-39,
AA-40
B0500722
TEA-7
B0500724
TEA-7
B0196858
TEA-2,
TEA-11
B0500748
AA-20
B0500778
GC-6
B0500833
GC-3,
GC-5
B0500924
GC-5,
GC-6
B0503956
GC-5
B0504033
AA-20
B0500937
TEA-7
B0504035
AA-20
B0500952
UV-6
B0504036
AA-20
B0500959
GC-5
B0505071
UV-6
B0500987
GC-5
B0505086
AA-13,
AA-15
B0196882
AA-39
B0196912
UV-15,
UV-19
B0196963
AA-24,
ICP-24
B0196966
AA-24,
ICP-24
AA-41
AA-40
B0198100
B0197298
B0197336
AA-40
GC-6
www.perkinelmer.com/essentials
Part No.
Index
www.perkinelmer.com/essentials
IND-8
1.800.762.4000 US
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
B0505268
GC-6
B0507487
AA-36
B0509065
AA-20
B0511519
AA-35
B0631012
UV-1
B0631051
B0505271
GC-6
B0507692
B0509095
AA-34
B0631013
UV-14
B0511522
AA-34
UV-1,
IR-5
B0631054
UV-3
AA-38
AA-36,
AA-40,
AA-41
B0511520
B0505284
AA-37,
AA-41
UV-3,
IR-5
B0631014
UV-1,
IR-5
B0631057
UV-3
B0631060
B0631015
UV-1,
IR-5
UV-3,
IR-5
B0631061
UV-3
B0631016
UV-1,
IR-5
B0631064
UV-3
B0631017
UV-1,
IR-5
B0631065
UV-3,
IR-5
B0631018
UV-1,
IR-5
B0631066
UV-3,
IR-5
B0631019
UV-1
B0631070
UV-2
B0631020
UV-1
B0631071
UV-2
B0631021
UV-1
B0631076
UV-2
B0631023
UV-1
B0631077
UV-2
B0631025
UV-1
B0631078
UV-2,
IR-5
B0631026
UV-1
B0631079
UV-2
B0631027
UV-1
B0631080
UV-2
B0631028
UV-1
B0631081
UV-2
B0631029
UV-1
B0631082
UV-2
B0631030
UV-1
B0631083
UV-2
B0631031
UV-1,
IR-5
B0631084
UV-4
B0631032
UV-1,
IR-5
B0631085
UV-4
B0631087
UV-4,
UV-11,
UV-17
B0631088
UV-4,
UV-17
B0631089
UV-4
B0631090
UV-4
B0505326
AA-41
B0507708
B0505340
TEA-6
B0507777
B0505475
GC-6
B0505480
B0511523
AA-34
B0511524
AA-34
B0511526
AA-34
B0511527
AA-34
B0511528
AA-34
AA-23,
ICP-23
B0511529
AA-34
B0511530
AA-34
B0509591
UV-15
B0511532
AA-31
B0509612
AA-43
B0511533
AA-31
B0509650
B0511534
AA-31
AA-23,
AA-39,
ICP-23
AA-23,
ICP-23
B0511535
AA-31
B0509652
AA-26
B0510032
AA-43
B0507920
AA-39
B0510070
UV-19
B0507921
AA-39
B0510364
GC-5
UV-11,
UV-19
B0507942
GC-4
B0507944
GC-4
B0505881
AA-40
B0507949
AA-39
B0505889
GC-4
B0507957
B0505962
AA-24,
ICP-23
AA-37,
AA-42
B0507959
AA-37
B0505977
GC-4
B0507960
AA-37
B0505978
GC-4
B0507962
AA-37
B0506058
AA-37,
AA-40,
AA-41
B0508306
AA-37
B0508310
AA-37,
AA-40
B0508371
ICP-25
B0508373
ICP-25
AA-41
B0509350
UV-6
B0507779
AA-41
B0509479
AA-37
AA-13
B0507791
AA-36
B0509546
UV-19
B0505520
GC-6
B0507792
AA-36
B0509554
B0505530
UV-14
B0507805
UV-9
AA-23,
ICP-23
B0505588
AA-13
B0507914
AA-36,
AA-40,
AA-41
B0509555
B0505589
AA-13
B0505590
AA-13
B0505601
GC-3,
GC-6
B0505650
AA-36
B0505653
GC-6
B0505677
LC-1,
LC-4
B0505866
B0507918
B0507919
AA-37,
AA-39
B0510366
B0510370
B0510397
UV-8
B0511537
AA-32
B0511538
AA-31
B0511539
AA-31
B0511540
AA-32
B0511541
AA-42
AA-22
B0511546
AA-30,
AA-32
AA-32
B0510398
AA-22
B0510404
AA-21
B0511674
AA-31
B0510412
UV-8
B0511675
AA-31
B0510417
AA-21
B0511676
AA-31
B0510487
AA-9,
AA-42
B0511677
AA-30,
AA-32
B0631033
UV-1,
IR-5
B0510581
FLR-29
B0511678
AA-31
B0631034
B0510984
GC-6
B0511679
AA-32
UV-1,
IR-5
B0511107
GC-6
B0511778
AA-32
B0631035
B0511502
AA-34
B0511779
AA-32
UV-1,
IR-5
B0511504
AA-34
UV-1,
IR-5
UV-4
AA-32
B0631036
B0631091
B0511806
B0511505
AA-34
B0631092
UV-4
B0631001
UV-1
B0631039
UV-3
B0631093
UV-4
B0631042
UV-3
B0631094
UV-4
B0631045
UV-3,
IR-5
B0631095
UV-4
B0631096
UV-4
B0631097
UV-4
B0631098
UV-4
B0631099
UV-4,
IR-5
B0631100
UV-4,
IR-5
B0511603
AA-34
B0506060
AA-38
B0506539
GC-4
B0506592
LC-4
B0506603
GC-4
B0506666
AA-13
B0506668
AA-13
B0508521
GC-4
B0511506
AA-34
B0631002
UV-1
B0506716
AA-39
B0508594
AA-37
B0511507
AA-34
B0631003
UV-1
B0506722
AA-20
B0508598
GC-4
B0511511
AA-34
B0631004
UV-1
B0507020
AA-38
B0508836
AA-20
B0511512
AA-34
B0631005
UV-1
B0631046
UV-3
B0507021
AA-38
B0508901
B0511513
AA-35
B0631006
UV-1
B0631047
UV-3
B0507226
AA-35,
AA-40
UV-18,
AA-23,
ICP-23
B0511514
AA-35
B0631007
UV-1
B0631048
UV-3
B0511515
AA-35
B0631008
UV-1
B0631049
UV-3
B0511516
AA-35
B0631009
UV-1
B0631050
B0511517
AA-35
B0631010
UV-1
UV-3,
IR-5
B0511518
AA-35
B0631011
UV-1
B0507355
UV-19
B0507403
FLR-29
B0507486
AA-36
B0508374
B0508520
B0508902
B0508921
ICP-25
AA-23,
ICP-23
AA-23,
ICP-23
TEA-6
Index
IND-9
1.800.561.4646 Canada
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
B0631101
UV-4,
IR-5
B0631152
UV-4
B3000159
B3002007
AA-22
B3140721
GC-27
ICP-5
B3002046
AA-21
AA-23,
ICP-23
E5711272
B0810144
AA-24,
ICP-24
E6070836
GC-27
B0631102
UV-4,
IR-5
B3000160
AA-24,
ICP-24
AA-26
B3140730
AA-23
E6400206
GC-27
AA-26
B3140760
AA-35
E6400207
GC-27
B3002091
AA-26
B3140770
E6400208
GC-27
B3002094
AA-26
AA-23,
ICP-23
B3141050
UV-18
E6400209
GC-27
E6400211
GC-27
B3141052
AA-26
E6400242
GC-27
B3141064
AA-19
E6400247
GC-27
B4000011
GC-5
E6400251
GC-27
B4000012
GC-4
E6400265
GC-27
E6401017
GC-27
E6401208
GC-27
E6401213
GC-27
E6401214
GC-27
E6401217
GC-27
E6401219
GC-27
E6401220
GC-27
E6401240
GC-27
E6401308
GC-27
E6401309
GC-27
E6420001
GC-28
E6420003
GC-28
B2000186
B2000199
UV-7
UV-7
B0631104
FLR-20
B0631107
FLR-20
B0631110
FLR-20
B0631113
FLR-20
B0631115
FLR-20
B0631116
FLR-20
B0631117
FLR-20
B0631118
FLR-20
B0631119
FLR-21
B2205021
B0631120
FLR-21
B2205022
UV-14
B3000342
AA-17
B0631121
FLR-21
B2205104
UV-7
B3000350
AA-35
B0631122
FLR-21
B2205302
UV-15
B3000641
AA-20
B0631123
FLR-21
B2205401
UV-7
B3000653
AA-20
B0631124
FLR-21
B2205411
UV-7
B3000655
AA-20
B0631125
FLR-22
B2205420
UV-7
B3000656
AA-9
B0631126
FLR-22
B2500081
UV-7
B3001123
AA-19
B0631127
FLR-22
B2500082
UV-7
B3001124
AA-19
B0631128
UV-5,
IR-5
B2500083
UV-7
B3001254
AA-16
B2500099
UV-9
B3001256
AA-16
UV-5,
IR-5
B2500100
UV-9
B3001262
AA-17
B2500103
UV-11,
UV-17
B3001264
AA-17
B3001333
UV-5
B0631129
B0631130
UV-5
B0631131
UV-5
B2000201
UV-7
B2000310
UV-7
B2190036
UV-11,
UV-17
B2190037
UV-11,
UV-17
B2190038
B2500127
B3000161
AA-24,
ICP-24
B3000166
ICP-23
B3002072
B3002076
B3000226
AA-42
B3002097
AA-26
B3000240
AA-37
B3002102
AA-20
B3000243
AA-42
B3002103
AA-20
UV-11,
UV-17
B3000251
AA-40
B3000274
AA-42
UV-14
B3000277
AA-42
B3120405
AA-18,
AA-20
B3121301
AA-18
B4000022
GC-3
B3130086
AA-18
B4000025
GC-3
AA-26
B4000028
GC-3
B3140210
AA-26
B4000033
GC-4
B3140211
AA-26
B4000046
GC-6
B3140226
AA-26
B4000057
B3140227
AA-26
GC-5,
GC-6
B3140236
ICP-23
B4000078
GC-6
B3140244
AA-26
C0050610
GC-98
B3140255
AA-43
C0050611
GC-98
B3140361
AA-20
C0550303
UV-6
C0550500
UV-19,
AA-9
C0550505
UV-19
E6420007
GC-28
C0991141
TEA-14
E6420021
GC-27
C0991299
TEA-44
ED020005
LC-45
C3220112
TEA-14
ED020008
LC-45
C3221027
TEA-14
ED020016
LC-46
C3221047
TEA-14
ED020017
LC-46
EDO20015
LC-46
L1060351
IR-6
L1108596
IR-20
L1108606
IR-20
L1108610
IR-20
L1108640
IR-20
L1108755
IR-20
L1108757
IR-20
L1108758
IR-20
L1108759
IR-20
L1108760
IR-20
L1108798
IR-20
L1108800
IR-20
L1160333
IR-7
B3140123
B3140362
AA-20
B3140380
AA-30,
AA-32
AA-26
B3140381
AA-32
B3001334
AA-26
B3140382
AA-31
B0631132
FLR-22
B2500129
UV-5
B3001335
AA-26
B0631133
FLR-22
B3000001
AA-38
B3140383
AA-31
B3001505
AA-21
B0631134
UV-1
B3000019
AA-26
B3140386
AA-32
B3001506
AA-21
B3140387
AA-32
B3140617
UV-18,
AA-23,
ICP-23
B0631142
FLR-21
B3000055
ICP-24
B3001507
AA-21
B0631144
UV-5,
IR-5
B3000111
AA-23,
ICP-23
B3001566
AA-22
B3001567
AA-22
B3001647
UV-18,
AA-23,
ICP-23
B3140618
ICP-24
B3140621
B0631145
UV-5,
IR-5
B3000132
AA-23,
ICP-23
B0631146
UV-5,
IR-5
B3000133
AA-23,
ICP-23
UV-5,
IR-5
B3000135
UV-5,
IR-5
B3000152
B0631147
B0631148
AA-23,
ICP-23
AA-24,
ICP-24
B0631149
UV-5,
IR-5
B3000157
AA-24,
ICP-24
B0631150
UV-4
B3000158
B0631151
UV-4
AA-24,
ICP-24
B3001769
B3001770
AA-24,
ICP-24
B3001771
AA-24,
ICP-24
B3001772
B3002006
AA-24,
ICP-24
AA-22
B3140622
UV-18,
AA-23,
ICP-23
UV-18,
AA-23,
ICP-23
AA-23,
ICP-23
B3140653
AA-46
B3140715
AA-23,
ICP-23
C6880054
UV-19
C6880055
UV-19
C6951014
UV-18
C6951019
UV-12
C6954099
UV-17
CP183700
UV-7
CP348320
TEA-44
CP348980
TEA-44
CP354420
FLR-23
CP360020
FLR-23
CP364460
FLR-23
CP372040
TEA-16
E5711269
GC-27
www.perkinelmer.com/essentials
Part No.
Index
www.perkinelmer.com/essentials
IND-10
1.800.762.4000 US
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
L1160550
IR-15
L1191081
IR-19
L1200333
IR-9
L1202035
IR-9
L1270754
IR-3
L1271192
IR-3
L1160581
IR-15
L1191082
IR-19
L1200334
IR-9
L1202036
IR-9
L1270757
IR-3
L1271193
IR-3
L1160582
IR-15
L1191099
IR-13
L1200335
IR-9
L1202037
IR-9
L1270758
IR-3
L1271194
IR-3
L1160583
IR-15
L1191113
IR-13
L1200336
IR-9
L1202715
IR-12
L1270759
IR-3
L1271195
IR-3
L1160585
IR-15
L1191114
IR-13
L1200337
IR-9
L1202716
IR-12
L1270761
IR-3
L1271202
IR-2
L1180480
IR-7
L1191115
IR-13
L1200338
IR-9
L1240053
IR-12
L1270762
IR-3
L1271250
IR-2
L1180486
IR-13
L1191207
IR-13
L1200343
IR-9
L1240055
IR-11
L1270764
IR-3
L1271602
IR-2
L1180501
IR-12,
IR-13
L1191209
IR-13
L1200344
IR-9
L1240056
IR-11
L1270765
IR-3
L1272002
IR-2
L1191210
IR-13
L1200345
IR-9
L1240057
IR-11
L1270766
IR-2
L1272102
IR-2
L1180502
IR-12,
IR-13
L1191211
IR-13
L1200346
IR-9
L1240059
IR-12
L1270767
IR-3
L1275000
IR-17
L1180503
IR-12,
IR-13
L1195019
IR-13,
IR-19
L1200351
IR-10
L1240062
IR-12
L1270768
IR-3
L1275001
IR-17
L1200361
IR-10
L1240063
IR-12
L1270769
IR-3
L1275102
IR-17
L1200214
IR-10
L1200364
IR-9
L1240064
IR-12
L1270941
IR-4
L1275105
L1200216
IR-10
L1200365
IR-9
L1240067
IR-12
L1270942
IR-4
IR-9,
IR-17
L1200219
IR-7,
IR-11
L1200366
IR-9
L1240069
IR-12
L1270944
IR-4
L1275106
L1200220
IR-10
L1200393
IR-17
L1240097
IR-11
L1270947
IR-4
IR-9,
IR-17
L1240098
IR-11
L1270948
IR-4
IR-19
IR-11
IR-17
L1304040
L1200223
L1200394
L1240204
IR-11
L1270949
IR-4
IR-14
IR-10
IR-12
L1310003
L1200236
L1200492
IR-19
L1245221
IR-12
L1270951
IR-4
IR-14
IR-10
L1200551
L1310004
L1200237
IR-10
IR-19
L1270301
IR-3
L1270952
IR-4
IR-14
L1200238
L1200552
L1310024
L1200553
IR-19
L1270402
IR-3
L1270954
IR-4
L1310025
IR-14
L1200555
IR-19
L1270404
IR-3
L1270957
IR-4
L1310026
IR-14
L1310027
IR-14
L1310028
IR-14
L1310029
IR-14
L1310034
IR-14
L1310035
IR-14
L1310036
IR-14
L1310039
IR-14
L1360250
IR-15
L1360266
IR-17
L1360267
IR-17
L1360268
IR-17
L1181056
IR-8
L1181257
IR-12,
IR-13
L1181301
IR-5
L1181302
IR-5
L1181303
IR-5
L1181304
IR-5
L1181314
IR-12,
IR-13
L1181316
IR-12,
IR-13
L1200253
IR-10,
IR-11
L1181318
IR-13
L1200254
IR-10
L1200556
IR-19
L1270408
IR-3
L1270958
IR-4
IR-13
L1200301
IR-10
L1200557
IR-19
L1270409
IR-3
L1270959
IR-4
IR-12,
IR-13
L1200302
IR-10
L1200558
IR-19
L1270410
IR-3
L1270961
IR-4
L1200304
IR-12
L1200559
IR-19
L1270421
IR-3
L1270962
IR-4
IR-12,
IR-13
L1200305
IR-9
L1200560
IR-19
L1270502
IR-3
L1270964
IR-4
L1200306
IR-9
L1200574
IR-19
L1270503
IR-6
L1270967
IR-4
L1200307
IR-9
L1200584
IR-19
L1270504
IR-6
L1270968
IR-4
L1200308
IR-9
L1200585
IR-19
L1270512
L1270969
IR-4
L1200309
IR-9
L1200589
IR-19
IR-2,
IR-3
L1270970
IR-4
L1200310
IR-9
L1201228
IR-12
L1270664
IR-3
L1270986
L1200311
IR-10
L1201231
IR-12
L1270665
IR-2
IR-2,
IR-3
IR-12
IR-3
L1271012
IR-17
IR-17
IR-10
L1201232
L1360269
L1200312
L1270666
IR-13,
IR-19
IR-9
L1270741
IR-3
L1271013
IR-17
IR-17
IR-9
L1201654
L1360270
L1200313
L1200314
IR-9
IR-9
L1270742
IR-3
L1270744
IR-3
IR-17
IR-9
IR-9
L1360272
L1200315
L1201865
IR-9,
IR-17
IR-17
IR-13,
IR-19
L1201655
L1360271
IR-13,
IR-19
IR-9
L1270747
IR-3
IR-9
L1360273
IR-17
IR-9
L1201904
L1271022
L1200316
IR-9
L1270748
IR-3
IR-8
L1360274
IR-17
IR-9
L1201905
L1271025
L1200321
L1270749
IR-3
L1360275
IR-17
IR-9
IR-3
IR-8
L1360280
IR-17
IR-9
L1270751
L1271027
L1200324
IR-9,
IR-12
IR-8
L1200323
L1201989
L1271026
L1270752
IR-3
IR-2
L1360281
IR-17
IR-9
IR-9
L1271102
L1200325
L1271191
IR-3
L1360282
IR-17
L1181319
L1181321
L1181322
L1185153
IR-12
L1185305
IR-12,
IR-13
L1191014
L1191015
L1191018
L1191021
L1191031
L1191054
L1191079
L1191080
IR-13
IR-13,
IR-19
IR-19
IR-13,
IR-19
IR-19
L1202006
L1271021
Index
IND-11
1.800.561.4646 Canada
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
L1360283
IR-17
L2250156
L4135238
GC-18
L4280001
GC-14
M0413535
GC-11
N0370394
AA-15
L1362300
IR-18
FLR-24,
FLR-28
L4135472
GC-40
L4280002
GC-14
M0413541
GC-9
N0370398
AA-15
L2251157
FLR-23,
LC-15
L4135478
GC-37
L4280003
GC-14
M0413545
GC-4
N0370399
AA-15
L4191040
GC-18
L4281023
GC-14
M0413546
GC-4
N0371485
AA-15
L4191050
GC-33
L4285001
GC-14
M0413547
GC-5
N0371492
AA-15
L4270009
GC-13
L4830406
GC-37
M0413548
GC-5
N0371493
AA-15
L4270010
GC-13
L4830417
GC-33
M0413549
GC-5
N0371505
AA-15
L4270026
GC-11,
GC-13
L4831520
IR-18
M0413550
GC-5
N0371520
AA-15
L4890045
GC-81
M0413551
AA-15
GC-13
L5351253
LC-5
GC-5,
GC-11
N0371522
L4270028
N0400100
AA-10
L4270032
GC-13
L6010101
UV-9
M0413552
N0400101
AA-10
L4270034
GC-13
L6010102
UV-9
GC-4,
GC-11
N0400102
AA-10
L4270122
GC-12
L6100006
UV-17
N0400103
AA-10
GC-12
N0401159
AA-14,
AA-15
L1362307
IR-18
L1860268
IR-18
L1860269
IR-18
L1860409
IR-18
L1861634
IR-18
L1861789
IR-18
L2251669
FLR-25
L1861790
IR-18
L2251692
FLR-25
L225B001
FLR-24
L225B003
FLR-24
L1871106
IR-19
L2150129
FLR-23
L2151164
FLR-28
L2151202
L2151203
FLR-26,
FLR-28
FLR-26,
FLR-28
L2151204
FLR-26
L2250008
FLR-25
L2250021
FLR-27
L2250022
FLR-27
L2250023
FLR-27
L2250024
FLR-27
L2250025
FLR-27
L2250030
FLR-27
L2250042
FLR-25
L2250100
FLR-28
L2250101
L2251247
FLR-26
L2251293
FLR-23
L2251300
FLR-27,
FLR-28
L225B005
FLR-24,
FLR-28
L2261065
LC-15
L4270123
L6100011
UV-17
L2261143
FLR-26
L4270124
GC-12
L6100014
UV-17
L2261145
LC-15
L4270125
GC-12
L6100023
UV-11
L2265120
LC-15
L4270127
L6100044
UV-8
L2269065
LC-14,
LC-15
L4270128
GC-10,
GC-12
L6100045
UV-11,
UV-17
L4070023
GC-9
L4270129
L6100046
L4070207
GC-10,
GC-12
GC-10,
GC-12
UV-11,
UV-17
L4271106
GC-13
L6100047
L4271159
GC-9,
GC-12
L4070208
GC-9,
GC-10,
GC-12
L4071029
GC-10,
GC-12
FLR-25,
FLR-28
L4071034
GC-9,
GC-12
L2250134
FLR-25
L4071123
L2250135
FLR-26
L2250138
FLR-26,
FLR-28
L2250139
FLR-21,
FLR-25
L2250140
FLR-25,
FLR-28
L2250141
FLR-25
L2250144
FLR-27,
FLR-28
L2250145
FLR-27
L2250151
FLR-24
L2250154
L4071151
GC-9
L4071594
GC-10,
GC-12
L4071596
GC-12
L4130171
GC-18
L4271187
GC-9,
GC-11,
GC-13
GC-9,
GC-11,
GC-13
GC-11
M0413556
GC-11
M0413557
GC-11
M0413559
GC-11
N0401171
AA-10
M0413592
GC-4
N0410100
AA-8
M0413593
GC-4
N0580233
ICP-14
M0413595
GC-9,
GC-10
N0580376
ICP-14
N0580469
ICP-16
N0580521
ICP-16
N0580524
ICP-16
N0580525
ICP-16
N0580528
ICP-13
M0413596
GC-10
UV-11,
UV-17
M0413597
GC-10
M0413598
GC-9
L6100048
UV-11,
UV-17
M0413625
GC-9,
GC-10
L6100049
UV-11,
UV-17
M0413626
GC-9
N0580531
AA-44
M0413627
ICP-9
UV-11,
UV-17
GC-9,
GC-11
N0580534
L6100050
N0580537
ICP-16
M0413628
GC-11,
GC-14
N0580538
ICP-13
N0580539
ICP-13
N0580540
AA-24,
ICP-24
L6310010
UV-8
L6310011
UV-8
M0413645
GC-11
L4271203
GC-11,
GC-13
L4271205
GC-13
L6310200
UV-16
M0415056
GC-9
L4271290
GC-11,
GC-13
L6310201
UV-16
M0415057
GC-9
N0580542
ICP-15
L6310202
UV-16
M0415360
GC-9
N0580601
ICP-13
L4275009
GC-9,
GC-13
L9001004
IR-9,
IR-12
M0415361
GC-9
N0580613
ICP-3
M0417035
GC-4,
GC-11
N0580624
ICP-22,
ICP-19
N0171159
IR-10,
IR-11
N0581497
ICP-6,
ICP-16
L4131004
GC-33
L4275033
GC-14
L9001029
IR-12
L4131283
GC-18,
GC-20
L4275072
GC-13
L9001162
IR-12
GC-33,
GC-37,
GC-41
L4275089
GC-13
M0410094
GC-9
L4275107
GC-13
M0410316
GC-11
N0200015
TEA-7
N0581534
ICP-14
AA-9
N0581558
ICP-9
L4135001
FLR-27
L2250146
GC-9,
GC-12
L4271160
GC-12
M0413555
L4135004
FLR-24
L4135067
GC-33,
GC-37
GC-33
L4275108
GC-13,
GC-14
M0413331
GC-11
N0370119
M0413348
GC-4
N0370149
AA-11
N0581793
ICP-9
L4275110
GC-11,
GC-13
M0413380
GC-11
N0370392
AA-10
N0582152
GC-4
N0370393
AA-15
ICP-26,
ICP-27
M0413401
www.perkinelmer.com/essentials
Part No.
Index
www.perkinelmer.com/essentials
IND-12
1.800.762.4000 US
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
N0582184
ICP-7,
ICP-9,
ICP-13
N0681631
ICP-7,
ICP-13,
ICP-18
N0691578
ICP-5,
ICP-6
N0695468
ICP-5,
ICP-12
N0775226
ICP-3
N1870195
FLR-27
N0775227
ICP-3
N2350014
N0691579
ICP-26
N0695469
N0681688
ICP-8
N0775228
ICP-3
LC-14,
LC-16
ICP-7,
ICP-13
N0691580
ICP-26
ICP-5,
ICP-12
LC-16
ICP-13
ICP-7,
ICP-13
N0691581
ICP-26
N0695470
ICP-4
LC-16
ICP-4
N0775289
N2351125
N0690262
N0691595
ICP-5
ICP-5,
ICP-12
ICP-3
N2350118
N0681690
N0775247
ICP-2
N0691664
ICP-7
ICP-4,
ICP-6
N0776052
ICP-4
LC-14,
LC-16
N0690284
ICP-5,
ICP-12
N0775297
ICP-13,
ICP-14,
ICP-16
ICP-4
N0695471
N2351285
N0690271
N0691678
ICP-6
N0695472
ICP-12
N0776053
ICP-4
N2360050
LC-10
ICP-6
ICP-13,
ICP-20
N0695473
ICP-12
N0911028
LC-45
TEA-43
ICP-12
N0691689
N2410092
N0690288
ICP-21
N0695474
ICP-12
N0911038
LC-45
TEA-44
ICP-11
N0691702
N2410141
N0690289
N0690360
ICP-4
N0691707
ICP-24
N0695475
ICP-12
N0911041
LC-48
N2410145
AA-44,
ICP-6
N0690568
ICP-9
N0691708
ICP-24
TEA-40,
TEA-43
N0695476
ICP-15
N1001021
LC-11
N0691709
ICP-21
N2410146
TEA-42
N0695494
ICP-7
N1001022
LC-11
N0691710
ICP-21
N2410147
TEA-36
N0695495
N1010047
GC-6
N0695214
ICP-9
ICP-7,
ICP-18
N2410153
TEA-37
N1010048
GC-6
N0695219
ICP-12
N0770198
ICP-5
N2410154
TEA-37
N1010050
GC-6
N0695220
ICP-9
N0770322
ICP-4
N2410155
TEA-42
N1010504
UV-10
N2410157
TEA-43
N1010539
UV-10
N2410164
TEA-43
N1010540
UV-10
N2410165
TEA-43
N1010565
UV-8
N2410166
TEA-43
N1010566
UV-8
N2410169
N1010567
UV-7
TEA-33,
TEA-36
N1010568
UV-7
N2410170
TEA-36
N1010569
UV-7
N2410172
TEA-33
N1011210
GC-3,
GC-6
N2410173
TEA-33
N0582185
N0582186
N0582235
N0582248
N0582251
N0582258
N0582259
N0582348
N0650161
N0650168
ICP-9,
ICP-11,
ICP-15
ICP-15
ICP-16
ICP-16
ICP-16
N0650230
ICP-15
AA-6
N0660123
AA-6
N0680212
ICP-16
N0680241
ICP-13
N0680275
ICP-16
N0680375
ICP-4,
ICP-6,
ICP-15,
ICP-19
N0680376
N0680503
ICP-4,
ICP-15,
ICP-19
ICP-16
N0690593
ICP-9
N0690607
ICP-8,
ICP-9,
ICP-10
ICP-22
N0650219
N0660122
N0690572
N0690610
ICP-9
N0695222
ICP-11
N0770338
ICP-2
N0690636
ICP-12
N0695222
ICP-9
N0770343
ICP-2
N0690637
ICP-12
N0695225
ICP-9
N0770344
ICP-2
N0690638
ICP-12
N0695233
ICP-12
N0770357
ICP-4
N0690639
ICP-6
N0695238
ICP-9
N0770358
ICP-3
N0690640
ICP-8
N0695295
ICP-7
N0770434
ICP-5
N0690666
ICP-12
N0695362
N0770437
ICP-2
N0690668
ICP-16
ICP-7,
ICP-10
N0770438
ICP-2
N0690670
ICP-3
N0695367
ICP-10
N0770546
ICP-3
ICP-11
TEA-44
ICP-4,
ICP-6
N0695368
N2410174
N0690672
N0770600
ICP-2
N1011445
GC-4
N0695381
ICP-10
N2410176
TEA-44
N0770603
GC-4
N0695396
ICP-15
ICP-3,
ICP-4
N1011446
ICP-4,
ICP-11
N2410188
TEA-43
N1015158
UV-8
N0695400
ICP-10,
ICP-12
N2410189
TEA-40
N1016001
UV-13
N2410191
TEA-43
N1016008
UV-13
N2410212
TEA-37
N1016015
UV-13
N2410237
TEA-38
N1016030
UV-13
N2410244
TEA-42
N1016045
UV-13
N2410265
TEA-40
N1016060
UV-13
N2410273
TEA-44
N1016070
UV-19
N2410278
N1016071
UV-19
TEA-40,
TEA-43
N1016072
UV-19
N2410315
TEA-38
N1016073
UV-19
N2410324
N1016074
UV-19
TEA-40,
TEA-43
N1870151
IR-18
N2410325
TEA-43
N2410330
TEA-37
N0690673
N0690676
ICP-3,
ICP-8,
ICP-22
ICP-8,
ICP-9
N0690677
ICP-11
N0680504
ICP-3
N0690712
ICP-10
N0680610
ICP-3
N0690720
N0680612
ICP-19,
ICP-22
ICP-8,
ICP-15
N0690769
ICP-16
N0690770
N0681234
N0681470
ICP-27
N0681574
ICP-3
N0681581
ICP-27
N0770606
ICP-2
N0770607
ICP-2
N0695414
ICP-11
N0770608
ICP-4
N0695426
ICP-11
N0770609
ICP-2
N0695433
ICP-11
N0771116
ICP-4
N0695441
ICP-7
N0772025
ICP-5
N0695442
ICP-7
N0772026
ICP-5
ICP-10
N0695448
ICP-7
N0775014
ICP-3
ICP-5,
ICP-12
N0695449
ICP-7
N0775177
ICP-3
N0695456
ICP-7
N0775220
ICP-5
N0695460
ICP-7,
ICP-11
N0775223
ICP-3
N0775224
ICP-3
N0775225
ICP-3
N0690772
ICP-16
N0690812
ICP-10
N0691182
ICP-12
N0695461
ICP-7
Index
IND-13
1.800.561.4646 Canada
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
N2410331
TEA-43
N2580001
LC-30
N2600304
N2910346
LC-6
N2931012
LC-3
N3050161
AA-3
N2410332
TEA-43
N2580002
LC-30
N2910349
LC-6
N2931054
LC-48
N3050162
AA-3
N2410501
TEA-40,
TEA-43
LC-6,
LC-8,
LC-9,
LC-10
N2910383
LC-6
N2931064
LC-3
N3050165
AA-3
LC-6
N2931081
LC-3
N3050166
AA-3
TEA-33
N2910385
LC-6
N2931097
LC-1
N3050168
AA-3
N2410503
TEA-33
N2910511
LC-7
N3050102
AA-3
N3050170
AA-2
N2410512
TEA-40
LC-6,
LC-8,
LC-9,
LC-10
N2910384
N2410502
N2910512
LC-7
N3050103
AA-2
N3050171
AA-3
N2410513
TEA-40
N2920011
LC-13
N3050105
AA-2
N3050172
AA-3
N2410518
TEA-43
N2920117
LC-13
N3050107
AA-2
N3050173
AA-3
N2411019
TEA-41
N2920146
N3050108
AA-2
N3050174
AA-3
N2411087
TEA-41
LC-13,
LC-17
N3050109
AA-2
N3050175
AA-3
N2411117
TEA-38
N2920149
N3050110
AA-2
N3050176
AA-3
N2411118
TEA-38
LC-13,
LC-17
N3050111
AA-2
N3050177
AA-3
N2411144
TEA-44
N3050114
AA-2
N3050178
AA-3
N2411235
TEA-37,
TEA-40
N3050115
AA-2
N3050180
AA-3
N3050118
AA-2
N3050182
AA-3
N3050119
AA-2
N3050183
AA-3
N3050121
AA-2
N3050184
AA-3
N3050122
AA-2
N3050186
AA-3
N3050123
AA-2
N3050187
AA-3
N3050124
AA-2
N3050189
AA-3
N3050126
AA-2
N3050190
AA-3
N3050128
AA-2
N3050191
AA-3
N3050129
AA-2
N3050192
AA-3
N3050130
AA-2
N3050196
AA-6
N3050133
AA-2
N3050197
AA-6
N3050134
AA-2
N3050198
AA-6
N3050135
AA-2
N3050201
AA-4
N3050137
AA-2
N3050202
AA-4
N3050138
AA-2
N3050203
AA-4
N3050139
AA-3
N3050204
AA-4
N3050141
AA-2
N3050205
AA-4
N3050142
AA-2
N3050206
AA-4
N3050144
AA-2
N3050207
AA-4
N3050145
AA-2
N3050208
AA-4
N3050146
AA-2
N3050209
AA-4
N3050148
AA-3
N3050210
AA-4
N3050149
AA-2
N3050211
AA-4
N3050150
AA-2
N3050212
AA-4
N3050152
AA-2
N3050213
AA-4
N2580003
LC-30
N2580010
LC-30
N2580011
LC-30
N2600313
N2580012
LC-30
N2580013
LC-30
N2600456
LC-12
N2580020
LC-30
N2600457
LC-12
N2580021
LC-30
N2600458
LC-12
N2580022
LC-30
N2600459
LC-12
N2580030
LC-30,
LC-33
N2600491
LC-12
N2600495
LC-12
N2580042
LC-30
N2600061
LC-8,
LC-9,
LC-10
N2600496
LC-12
N2922006
LC-15
N2600497
LC-12
N2922010
LC-14
N2600498
LC-12
N2922011
LC-14
N2411255
TEA-42
N2600070
LC-12
N2600499
LC-12
N2922013
LC-23
N2411257
TEA-41
N2600089
N2600505
LC-12
N2922028
LC-14
N2411264
TEA-37
LC-3,
LC-12
N2600506
LC-12
N2922029
LC-14
N2411267
TEA-42
N2600507
LC-12
N2922030
LC-14
N2411273
TEA-40,
TEA-43
LC-7,
LC-8,
LC-9,
LC-10
LC-7,
LC-8,
LC-9,
LC-10
N2411274
TEA-44
N2411291
TEA-37
N2411300
TEA-37,
TEA-40
N2411333
TEA-43
N2411341
TEA-38
N2411342
TEA-38
N2411359
TEA-39,
TEA-40
N2600104
N2600124
N2600191
N2600192
LC-8,
LC-9
LC-7,
LC-8,
LC-9,
LC-10
N2411362
TEA-42
N2411363
TEA-42
N2411364
TEA-42
N2411374
TEA-41
N2411401
TEA-40
N2600265
LC-9
N2411487
TEA-37
N2600266
N2411514
TEA-37,
TEA-40
LC-6,
LC-8,
LC-9,
LC-10
N2411527
TEA-43
N2420212
TEA-40,
TEA-44
N2420214
N2421070
N2580000
N2600226
N2600259
N2600274
TEA-38
TEA-37
LC-30
N2600284
LC-7,
LC-8,
LC-9,
LC-10
LC-12
LC-6,
LC-8,
LC-9,
LC-10
LC-12
N2600508
LC-12
N2922046
LC-14
N2601149
LC-45
N2922082
LC-15
N2601174
LC-7,
LC-8
N2930023
LC-3
N2930024
LC-3
N2930035
LC-1
N2930036
LC-1
N2930037
LC-1
N2930038
LC-1
N2930040
LC-1
LC-6,
LC-8,
LC-9,
LC-10
N2930041
LC-1
N2930042
LC-1
N2930043
LC-1
N2601346
LC-45
N2930044
LC-1
N2601477
LC-12
N2930146
LC-1
N2601503
LC-6,
LC-8,
LC-9,
LC-10
N2930147
LC-1
N2930311
LC-3
N2930312
LC-3
N2601580
LC-16
N2930313
LC-3
N2601581
LC-16
N2930314
LC-1
N2910342
LC-6
N2930340
N2910343
LC-6
LC-3,
LC-23
LC-3
AA-3
N3050214
AA-4
LC-6
N2930341
N3050155
N2910344
LC-23
AA-2
N3050215
AA-4
LC-6
N2930343
N3050157
N2910345
N3050158
AA-2
N3050216
AA-4
N2601189
LC-12
N2601262
LC-12
N2601295
N2601316
LC-6,
LC-8,
LC-9,
LC-10
www.perkinelmer.com/essentials
Part No.
Index
www.perkinelmer.com/essentials
IND-14
1.800.762.4000 US
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
N3050217
AA-4
N3050365
AA-3
N3050615
AA-8
N3050748
AA-5
N3050815
AA-5
N3141023
AA-28
N3050218
AA-4
N3050366
AA-3
N3050620
AA-8
N3050749
AA-5
N3050816
AA-5
N3141024
AA-28
N3050302
AA-3
N3050368
AA-3
N3050630
AA-8
N3050750
AA-5
N3050817
AA-5
N3141025
AA-29
N3050303
AA-2
N3050370
AA-2
N3050634
AA-8
N3050752
AA-5
N3050818
AA-5
N3141026
AA-29
N3050305
AA-2
N3050371
AA-3
N3050655
AA-8
N3050755
AA-5
N3050860
AA-8
N3141027
AA-29
N3050307
AA-2
N3050372
AA-3
N3050657
AA-8
N3050757
AA-5
N3050861
AA-8
N3141028
AA-29
N3050308
AA-2
N3050373
AA-3
N3050664
AA-8
N3050758
AA-5
N3050862
AA-8
N3141029
AA-29
N3050309
AA-2
N3050374
AA-3
N3050670
AA-8
N3050761
AA-5
N3050863
AA-8
N3141030
AA-29
N3050310
AA-2
N3050375
AA-3
N3050672
AA-8
N3050762
AA-5
N3050864
AA-8
N3141031
AA-29
N3050311
AA-2
N3050376
AA-3
N3050675
AA-8
N3050765
AA-5
N3050865
AA-8
N3141032
AA-29
N3050314
AA-2
N3050377
AA-3
N3050680
AA-8
N3050766
AA-5
N3050866
AA-8
N3150131
AA-8
N3050315
AA-2
N3050378
AA-3
N3050683
AA-8
N3050768
AA-5
N3050867
AA-8
N3150303
AA-8
N3050318
AA-2
N3050380
AA-3
N3050691
AA-8
N3050770
AA-5
N3050868
AA-8
N5001409
N3050319
AA-2
N3050382
AA-3
N3050702
AA-5
N3050771
AA-5
N3050869
AA-8
GC-98,
TEA-44
N3050321
AA-2
N3050383
AA-3
N3050703
AA-5
N3050772
AA-5
N3050870
AA-8
N5002189
TEA-44
N5150100
LC-20,
GC-44
N5150101
LC-20,
GC-44
N5150102
LC-20,
GC-44
N5150103
LC-20,
GC-44
N5150112
LC-20,
GC-44
N5150113
LC-20,
GC-44
N5150114
LC-20,
GC-44
GC-47
N3050322
AA-2
N3050384
AA-3
N3050705
AA-5
N3050773
AA-5
N3050871
AA-8
N3050323
AA-2
N3050386
AA-3
N3050707
AA-5
N3050775
AA-5
N3050872
AA-8
N3050324
AA-2
N3050387
AA-3
N3050708
AA-5
N3050776
AA-5
N3050873
AA-8
N3050326
AA-2
N3050389
AA-3
N3050709
AA-5
N3050777
AA-5
N3050874
AA-8
N3050328
AA-2
N3050390
AA-3
N3050710
AA-5
N3050778
AA-5
N3051050
AA-9
N3050329
AA-2
N3050391
AA-3
N3050711
AA-5
N3050780
AA-5
N3110109
AA-13
N3050330
AA-2
N3050392
AA-3
N3050714
AA-5
N3050782
AA-5
N3110110
AA-13
N3050333
AA-2
N3050401
AA-4
N3050715
AA-5
N3050783
AA-5
N3110111
AA-13
N3050334
AA-2
N3050402
AA-4
N3050718
AA-5
N3050786
AA-5
N3110145
AA-16
N3050335
AA-2
N3050403
AA-4
N3050719
AA-5
N3050787
AA-5
N3110146
AA-16
N3050337
AA-2
N3050404
AA-4
N3050721
AA-5
N3050789
AA-5
N3110147
AA-20
N3050338
AA-2
N3050405
AA-4
N3050722
AA-5
N3050791
AA-5
N3110149
AA-17
N3050339
AA-3
N3050406
AA-4
N3050723
AA-5
N3050792
AA-5
N3111158
AA-13
N5150160
N3050341
AA-2
N3050407
AA-4
N3050726
AA-5
N3050801
AA-5
N3111159
AA-13
N5150161
GC-47
LC-22
N3050342
AA-2
N3050408
AA-4
N3050728
AA-5
N3050802
AA-5
N3111161
AA-14
N5150162
N3050344
AA-2
N3050409
AA-4
N3050729
AA-5
N3050803
AA-5
N3141011
AA-28
N5150165
GC-47
N3050345
AA-2
N3050410
AA-4
N3050730
AA-5
N3050804
AA-5
N3141012
AA-28
N5150166
GC-47
N3050346
AA-2
N3050411
AA-4
N3050734
AA-5
N3050805
AA-5
N3141013
AA-28
N5150167
LC-22
N5150180
LC-20,
GC-44
N5150181
LC-22,
GC-47
N5150182
LC-20,
GC-44
N5150183
LC-20,
GC-44
N3050348
AA-3
N3050412
AA-4
N3050735
AA-5
N3050806
AA-5
N3141014
AA-28
N3050349
AA-2
N3050413
AA-4
N3050737
AA-5
N3050807
AA-5
N3141015
AA-28
N3050350
AA-2
N3050414
AA-4
N3050738
AA-5
N3050808
AA-5
N3141016
AA-28
N3050352
AA-2
N3050415
AA-4
N3050739
AA-5
N3050809
AA-5
N3141017
AA-28
N3050355
AA-3
N3050416
AA-4
N3050741
AA-5
N3050810
AA-5
N3141018
AA-28
N3050357
AA-2
N3050417
AA-4
N3050742
AA-5
N3050811
AA-5
N3141019
AA-28
N3050358
AA-2
N3050418
AA-4
N3050744
AA-5
N3050812
AA-5
N3141020
AA-28
N3050361
AA-3
N3050605
AA-8
N3050745
AA-5
N3050813
AA-5
N3141021
AA-28
N5150262
LC-22
N3050362
AA-3
N3050611
AA-8
N3050746
AA-5
N3050814
AA-5
N3141022
AA-28
N5150267
LC-22
Index
IND-15
1.800.561.4646 Canada
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
N5150340
LC-20,
GC-44
N5190276
TEA-17
N5190738
TEA-8
N5202019
TEA-34
N5370673
N5390133
TEA-23
N5190279
TEA-17
N5190762
TEA-10
N5203020
TEA-18
TEA-19,
TEA-20
N5390134
TEA-29
N5150341
LC-20,
GC-44
N5370674
TEA-19,
TEA-20
N5390135
TEA-24
N5150342
LC-20,
GC-44
N5370675
TEA-19,
TEA-20
N5390136
TEA-27
N5390137
TEA-27
N5150343
N5370676
TEA-19,
TEA-20
N5390138
TEA-24
N5390141
TEA-32
N5190280
TEA-17
N5190763
TEA-31
N5370103
TEA-35
N5190282
TEA-16
N5190784
TEA-8
N5370147
TEA-8
N5190283
TEA-17
N5190788
N5370153
TEA-10
LC-20,
GC-44
N5190284
TEA-17
N5370205
TEA-9
N5190285
TEA-16
N5150349
LC-20,
GC-44
N5190312
TEA-8
TEA-2,
TEA-4,
TEA-6,
TEA-7,
TEA-15
N5190323
TEA-18
N5190869
N5150512
LC-20,
GC-44
N5190330
TEA-16,
TEA-17
LC-20,
GC-44
N5190370
N5190376
N5150518
N5150519
LC-20,
GC-44
N5150610
GC-45
N5150611
GC-45
N5150612
LC-21
N5150613
LC-21
N5150614
LC-21,
GC-45
N5150615
N5150616
N5150617
N5156021
N5156025
LC-21,
GC-45
LC-21,
GC-45
LC-21,
GC-45
N5370206
TEA-9
N5370207
TEA-9
N5370679
TEA-19
N5390143
TEA-23
TEA-18
N5370208
TEA-9
N5372060
TEA-8
N5390144
TEA-23
N5191009
TEA-8
N5370298
TEA-7
N5372187
TEA-8
N5390145
TEA-23
N5191056
TEA-8
N5370299
TEA-7
N5373009
TEA-8
N5390146
TEA-23
TEA-32
N5191085
TEA-10
N5370331
TEA-15
N5373126
TEA-10
N5390154
TEA-28
TEA-24,
TEA-31
N5191324
TEA-17
N5370332
TEA-15
N5374092
TEA-44
N5390156
TEA-28
N5190377
TEA-27,
TEA-31
N5191333
TEA-10
N5370428
TEA-9
N5374093
TEA-44
N5390157
TEA-29
N5191352
N5370464
TEA-15
N5374098
TEA-9
N5390174
TEA-30
N5190378
TEA-24,
TEA-31
TEA-15,
TEA-18
N5370470
TEA-15
N5374099
TEA-9
N5390175
N5191469
TEA-32
N5370487
TEA-15
N5380015
TEA-22
TEA-26,
TEA-30
TEA-27,
TEA-31
N5191472
TEA-27
N5370488
TEA-15
N5380037
TEA-22
N5390176
TEA-30
N5191479
TEA-9
N5370490
TEA-15
N5380051
TEA-22
N5390177
TEA-28
N5190399
TEA-31
N5191549
N5370540
TEA-8
N5380052
TEA-22
N5390178
TEA-28
N5190416
TEA-31
TEA-24,
TEA-27,
TEA-31
N5370550
TEA-15
N5380053
TEA-22
N5390193
TEA-28
N5390197
TEA-26
N5390420
TEA-26
N5390421
TEA-26
N5390426
TEA-26
N5390427
TEA-26
N5390428
TEA-26
N5390450
TEA-26
N5390451
TEA-26
N5390452
TEA-26
N5390453
TEA-26
N5390460
TEA-25
N5390461
TEA-25
N5390462
TEA-25
N5390463
TEA-25
N5390464
TEA-25
N5390465
TEA-25
N5390466
TEA-25
N5390467
TEA-25
N5390468
TEA-25
N5390469
TEA-25
N5390470
TEA-25
N5390471
TEA-25
N5190393
N5190417
TEA-32
N5190462
TEA-33
N5190504
TEA-8
N5190505
TEA-8
LC-20,
GC-44
N5190510
TEA-15
N5190511
TEA-18
LC-20,
GC-44
N5190512
TEA-15
N5190172
TEA-18
N5190180
TEA-2,
TEA-3
N5190185
TEA-8
N5190196
TEA-18
N5190197
TEA-17
N5190202
TEA-17
N5190203
TEA-16
N5190207
N5191552
TEA-15
N5370552
TEA-15
N5380057
TEA-22
N5191558
TEA-9
N5370553
TEA-15
N5380058
TEA-22
N5191559
TEA-9
N5370554
TEA-15
N5380061
TEA-22
N5191662
TEA-26
N5370555
TEA-15
N5380062
TEA-22
N5191700
TEA-29,
TEA-31
N5370600
TEA-19
N5380063
TEA-22
N5370603
TEA-19
N5380071
TEA-22
TEA-32
N5370604
TEA-19
N5381056
TEA-22
N5191792
N5190515
TEA-16
N5191837
TEA-24
N5370606
TEA-19
N5381081
TEA-22
N5190516
TEA-16
N5191845
N5370619
TEA-19
N5390101
TEA-26
N5190603
TEA-35
TEA-8,
TEA-10
N5370620
TEA-19
N5390102
TEA-26
N5190606
TEA-24
TEA-18,
TEA-22
N5370622
TEA-19
N5390104
TEA-30
N5370623
TEA-19
N5390105
N5370629
TEA-21
N5370637
TEA-20
N5190609
TEA-29,
TEA-31
N5191875
TEA-23,
TEA-26,
TEA-30
N5191880
TEA-8
TEA-29,
TEA-31
N5191937
TEA-8,
TEA-9
N5190613
TEA-32
N5192094
TEA-31
N5370645
TEA-21
TEA-15
N5190614
TEA-27
N5200001
TEA-7
N5370646
TEA-21
N5190226
TEA-8
N5190615
N5200032
TEA-8
N5370665
TEA-20
N5390112
TEA-28
N5190264
TEA-15
TEA-29,
TEA-31
N5200033
TEA-8
N5370666
TEA-20
N5390122
TEA-26
N5190269
TEA-34
N5190616
TEA-18
N5200040
TEA-18
N5370671
N5390128
TEA-32
N5190270
TEA-34
N5190617
TEA-32
N5200042
TEA-18
TEA-19,
TEA-20
N5390131
TEA-30
N5190271
TEA-34
N5190619
TEA-31
N5200050
TEA-20
TEA-19,
TEA-20
N5390132
TEA-28
N5190611
N5370672
N5390107
TEA-23,
TEA-26,
TEA-28
www.perkinelmer.com/essentials
Part No.
Index
www.perkinelmer.com/essentials
IND-16
1.800.762.4000 US
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
N5390472
TEA-25
N6000637
N6025001
GC-97
N6101037
GC-32
N6101760
GC-35
TEA-26
N6100016
GC-32
N6101048
GC-19
GC-22,
GC-88
N6120026
N5390478
GC-40,
GC-41
N6120027
GC-34
TEA-28,
TEA-30
N6000729
GC-35
GC-19
N6102190
GC-82
N6120031
GC-22
N6000968
GC-35
GC-15
N6102197
GC-14
N6120032
GC-94
N5391004
TEA-30
N6000981
GC-81
N6102351
GC-14
N6120033
GC-94
N5391014
TEA-23
GC-40,
GC-41
GC-30
TEA-23
N6120036
GC-22
N5391016
TEA-26
GC-13,
GC-15,
GC-19,
GC-32
N6120034
N5391015
GC-31,
GC-32
N6102354
N6120046
GC-38
N5391017
TEA-26
GC-38
N6120047
GC-42
N5391048
TEA-32
N6120048
N5391051
TEA-32
GC-38,
GC-42
N5391054
TEA-26
N5391003
N5391063
TEA-26
N5391085
TEA-32
N5391090
TEA-32
N5391093
TEA-27
N5391094
TEA-27
N5391095
TEA-27
N5391104
TEA-32
N5391181
TEA-27,
TEA-31
N6001057
N6001204
GC-18,
GC-20
GC-31,
GC-32,
GC-33,
GC-37
N6100037
N6100038
GC-32
GC-32,
GC-36
N6100047
GC-15
N6100048
GC-19
N6100102
GC-15,
GC-19,
GC-32
N6100153
GC-15,
GC-16,
GC-17,
GC-19
N6101050
N6101052
N6101070
N6101085
N6101100
GC-32
N6101182
GC-22
N6101183
GC-22
N6102359
GC-38
N6101251
GC-22,
GC-88
N6102360
GC-38
N6101252
GC-22,
GC-88
N6103079
GC-21
N6001234
GC-33
N6001235
GC-33
N6001288
GC-33
N6100157
GC-15
N6001289
GC-37
N6100158
GC-15
N6101253
N6001300
GC-18
N6100159
N6001476
GC-37
GC-15,
GC-17
N6002017
GC-18
N6100161
N6002036
GC-18
N6002037
N6102357
N6120050
GC-15
N6120057
GC-42
N6120058
GC-38,
GC-42
N6120059
GC-31,
GC-35,
GC-42
N6103080
GC-21
GC-22,
GC-88
N6103082
GC-21
N6103089
GC-31
N6101276
GC-87
N6103151
GC-31
GC-35
N6101297
GC-31
N6103167
GC-31
N6100170
GC-32
N6101358
GC-15
N6103175
GC-31
N6120060
GC-38
GC-18
N6100194
GC-32
N6101372
GC-15
N6103188
GC-31
N6120061
N6002096
GC-18
N6100228
GC-36
N6101374
GC-15
N610T100
GC-15
GC-38,
GC-41,
GC-42
N6120062
GC-38,
GC-41,
GC-42
N5391183
TEA-27
N6002124
GC-24
N6100243
GC-40
N6101375
GC-19
N6120001
N5391184
TEA-32
N6002181
GC-24
N6100244
GC-40
N6101377
N6002182
GC-24
GC-40
GC-97
GC-33,
GC-41
N6100245
N6120004
N6000129
GC-19,
GC-82,
GC-97
GC-19,
GC-82
N6120066
GC-36
GC-97
GC-24
N6100253
N6120005
N6002195
N6101378
GC-15
GC-33
N6002212
GC-24
N6100256
GC-16
N6120006
N6101380
N6120070
GC-32
GC-24
N6100260
GC-17
GC-22,
GC-88
GC-31,
GC-34,
GC-42
LC-22,
GC-46
N6120071
GC-19
N6002218
GC-24
N6100261
GC-17
N6101390
N6120007
GC-19
N6120072
GC-19
N6003057
GC-40,
GC-41
N6100264
GC-40
GC-22,
GC-88
N6120008
GC-19
N6120074
GC-17
GC-15
N6120075
GC-17
GC-40,
GC-41
GC-22,
GC-88
N6120009
N6003066
GC-15,
GC-17
N6101469
N6120076
GC-16
GC-22
N6120011
GC-35
N6120077
GC-16
N6100331
GC-15,
GC-17
GC-22,
GC-88
GC-32
N6100292
N6101470
N6120010
N6101473
GC-97
N6120012
GC-34
N6120078
N6100342
GC-21
N6101474
GC-13
N6120014
GC-35
GC-16,
GC-17,
GC-25
N6100357
GC-31
N6101482
GC-34
N6120080
GC-34
N6100361
GC-31
GC-15,
GC-17
N6120015
N6120016
GC-25
N6101539
GC-17
N6120081
GC-38
N6120017
GC-25
N6101547
GC-32
N6120082
GC-16
N6120020
N6101702
GC-16
N6120083
GC-16
N6120088
GC-40
N6101703
GC-16
GC-31,
GC-34,
GC-82
GC-40
N6101715
GC-17
N6000130
N6000131
GC-33
N6000163
GC-33,
GC-37
N6000168
GC-33
N6000215
GC-18
N6000251
GC-20
N6000252
GC-20
N6000266
GC-33,
GC-35,
GC-37,
GC-41
N6002213
N6020024
GC-20,
GC-33,
GC-37,
GC-82
N6020136
GC-33
GC-33,
GC-35,
GC-37,
GC-41
N6021400
GC-35
N6022030
GC-97
N6022031
GC-97
GC-18
N6022502
GC-20
N6000507
GC-35
N6023031
N6000634
GC-41
GC-20,
GC-82,
GC-97
N6000635
GC-41
N6000267
N6000296
N6023060
GC-97
N6100275
N6100364
GC-31
N6100410
GC-6,
GC-11,
GC-13,
GC-48
N6100411
GC-48
N6101747
GC-17
N6101034
GC-15,
GC-17
N6101751
GC-17
N6120022
GC-15
N6120089
N6120023
GC-19
N6120090
GC-36
N6120024
GC-32
N6120091
GC-36
N6120025
GC-19
N6120092
GC-36
Index
IND-17
1.800.561.4646 Canada
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
N6120093
GC-36
N6120155
N6212411
GC-30
N6471012
GC-27
N6603047
GC-8
N8120113
ICP-20
N6120094
GC-36
GC-34,
GC-97
N6212415
GC-30
N6471025
GC-27
N6603049
GC-8
N8120114
ICP-20
GC-97
N6120095
GC-40
N6120156
N6212416
GC-30
N6600037
GC-39
N6603052
GC-8
N8120116
ICP-19
N6120098
GC-16
N6120157
GC-97
N6212420
GC-30
N6600044
GC-37
N6603053
GC-8
N8120124
ICP-19
GC-19
N6120158
GC-25
N6212421
GC-30
N6601069
GC-8
N8120140
ICP-21
GC-15
GC-25
N6212429
GC-30
GC-38,
GC-39
N6603054
N6120159
N6609060
GC-14
N8120141
ICP-21
N6120102
GC-17
N6120160
GC-22
N6212473
GC-30
N6601072
N6620087
GC-35
N8120160
ICP-19
N6120105
GC-22
N6120161
GC-32
N6212475
GC-30
GC-38,
GC-39
N6621006
N8120161
ICP-22
GC-22
N6120162
GC-31,
GC-32
N6212477
GC-30
LC-2,
GC-87
N8120181
ICP-18
N6621008
LC-2,
GC-87
N8120509
ICP-19
N6621009
LC-2,
GC-87
N8120511
ICP-18
N8120512
ICP-18
N6621012
GC-97
N8120515
N6621016
GC-97
ICP-19,
ICP-22
GC-97
N8120516
GC-38,
GC-39
N6621018
ICP-19,
ICP-22
N6621023
GC-20
N8120522
ICP-32
N6601088
GC-38,
GC-39
N6621028
N8122000
ICP-20
N6601089
GC-38
GC-15,
GC-16,
GC-17,
GC-19,
GC-20
N6120100
N6120101
N6120109
N6120120
GC-32
N6120121
GC-32
N6120122
GC-35
N6120123
GC-35
N6120124
GC-34
N6120125
GC-34
GC-27,
GC-29
N6601078
GC-31
GC-38,
GC-39
N6251026
GC-98
N6120167
GC-31
N6601082
N6251027
GC-98
GC-38,
GC-39
N6120168
GC-31
N6300063
GC-14
N6601084
N6120180
LC-22,
GC-46
N6300155
GC-14
GC-38,
GC-39
N6301054
GC-11
GC-13
GC-31
N6120166
GC-36
N6120181
GC-22
N6120127
GC-36
N6121000
GC-19
N6120128
GC-40
N6301107
GC-14
N6121001
GC-15
N6120129
GC-40
N6301108
GC-14
N6121002
GC-15
N6120130
GC-42
N6330069
GC-29
N6121003
N6120131
GC-42
GC-19,
GC-82
N6330078
GC-29
N6120136
GC-19
N6121004
GC-17
N6120137
GC-19
N6121006
GC-17
N6120138
GC-15
N6121020
GC-15
N6120139
GC-15
N6121021
GC-15
N6120140
GC-17
N6121022
GC-15
N6120141
GC-17
N6200119
GC-10
N6120142
GC-16
N6212329
N6120143
GC-16
GC-30,
GC-84
N6120144
GC-21
N6120146
GC-31,
GC-32,
GC-35,
GC-36,
GC-40,
GC-97
GC-97
N6120149
GC-97
N6120150
GC-34
N6120151
GC-38
N6120152
GC-97
N6120153
GC-97
N6120154
GC-38,
GC-97
GC-38,
GC-39
N6212495
N6120165
N6120126
N6120148
N6601077
N6330084
GC-29
N6330100
GC-29
N6330101
GC-29
N6330102
GC-29
N6331208
GC-29
N6331316
GC-29
N6331320
GC-29
N6331339
GC-29
GC-29
N6212330
GC-84
N6331345
N6212332
GC-30
N6331346
N6212347
GC-30
N6331376
GC-29
N6212350
GC-30,
GC-84
N6331395
GC-29
N6331398
GC-29
N6212351
GC-29,
GC-30
N6212372
GC-30
N6212373
GC-30
N6212374
GC-30
N6212403
GC-30
N6212407
GC-27,
GC-29,
GC-30
N6212408
GC-30
N6331400
GC-29
GC-29
N6601085
ICP-18,
ICP-20
GC-8
N6621042
GC-18
N6601103
GC-8
N6621052
GC-33
N8122006
ICP-19
N6601108
GC-8
N6621084
GC-33
N8122007
ICP-19
N6601109
GC-8
N6621124
GC-25
N8122008
ICP-19
N6601110
GC-8
N6621125
GC-25
N8122009
ICP-19
N6601112
GC-8
N8100115
ICP-20
N8122012
ICP-19
N6601125
GC-8
N8100116
ICP-20
N8122014
ICP-32
N6601127
GC-8
N8100121
ICP-20
N8122017
ICP-32
N6601159
GC-8
N8101209
ICP-20
N8122019
ICP-19
N6601202
GC-8
N8101210
ICP-20
N8122025
ICP-20
N6601203
GC-8
N8102001
ICP-20
N8122035
ICP-20
N6601206
GC-8
N8102051
ICP-20
N8122038
ICP-32
N6601254
GC-8
N8102101
ICP-20
N8122039
ICP-32
N6601272
GC-38
N8102102
ICP-20
N8122040
ICP-20
N6601287
GC-38,
GC-39
N8102111
ICP-20
N8122117
ICP-22
N8102112
ICP-20
N8122118
ICP-22
N8102131
ICP-20
N8122126
ICP-4
N8102141
ICP-20
N8122132
ICP-22
N8102403
ICP-32
N8122150
ICP-21
N8102405
ICP-32
N8122161
ICP-21
N8120100
ICP-19
N8122162
ICP-21
N8120101
ICP-19
N8122188
ICP-8
GC-29
N6603000
GC-8
N6331423
GC-29
N6603001
GC-8
N6603002
GC-8
N6331531
GC-29
N6603004
GC-8
N6470012
GC-27
N6603005
GC-8
N6470207
GC-27
N6603045
GC-8
N6603046
GC-8
GC-27
N8122004
N6601101
N6331411
N6470208
ICP-20
GC-8
GC-29
GC-29
ICP-20
N8122003
N6601100
N6331405
N6331435
N8122002
www.perkinelmer.com/essentials
Part No.
Index
www.perkinelmer.com/essentials
IND-18
1.800.762.4000 US
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
N8122192
ICP-18
N9300059
N9300118
AA-48
N9300160
AA-49
N9300219
ICP-24
N9300119
AA-48
N9300161
AA-49
AA-51,
ICP-30
N9301178
N8122235
GC-5,
GC-83
ICP-22
N9300060
GC-83
N9300120
AA-48
N9300162
AA-49
N9300220
N8122240
ICP-24
N9300061
GC-83
N9300121
AA-48
N9300163
AA-49
AA-51,
ICP-30
GC-89,
TEA-33,
TEA-36
N9301179
GC-89
N8122241
ICP-24
N9300063
GC-82
N9300122
AA-48
N9300165
AA-49
N9301191
N8122308
ICP-18
N9300065
AA-13
N9300123
AA-48
N9300166
AA-49
GC-89,
TEA-33,
TEA-36
N8122340
ICP-21
N9300066
AA-13
N9300124
AA-48
N9300167
AA-49
ICP-21
N9300067
ICP-3,
ICP-19,
ICP-22
N9300125
AA-48
N9300168
AA-49
AA-48
N9300169
AA-49
AA-48
N9300170
AA-49
AA-49
N8122239
N8122341
N8122350
N8122351
ICP-18
ICP-18
N9300068
AA-45
N9300126
N9300127
N8125010
ICP-32
N9300069
AA-44
N9300128
AA-48
N9300171
N8125029
ICP-18,
ICP-19
N9300077
GC-27,
GC-85,
GC-86
N9300129
AA-48
N9300172
AA-48
N9300130
AA-48
N9300173
AA-48
N9300131
AA-48
N9300174
AA-48
N9300132
AA-48
N9300175
AA-48
N9300133
AA-48,
AA-51,
ICP-30
N9300176
AA-48
N9300177
AA-49
N9300178
AA-49
N8126039
ICP-18
N8126040
ICP-18
N9300081
GC-86
N8126041
ICP-18
N9300082
GC-29
N9300030
GC-83
N9300086
IR-8
N9300031
GC-83
N9300087
GC-93,
GC-95
N9300032
GC-83
N9300033
GC-83
N9300036
GC-83
N9300037
GC-83
N9300038
GC-83
N9300039
GC-83
N9300040
GC-83
N9300041
GC-83
N9300088
N9300089
GC-94
GC-32
N9300134
N9300135
N9300136
AA-49
AA-49
AA-49
N9300179
N9300180
N9300181
AA-48
AA-48
AA-48
N9300221
AA-51,
ICP-30
N9300224
AA-51,
ICP-30
N9301192
GC-89
N9300225
ICP-31
N9301193
GC-89
N9300226
ICP-31
N9301204
N9300227
ICP-31
AA-23,
ICP-23
N9300228
ICP-31
N9301205
AA-23,
ICP-23
N9300229
ICP-31
N9301221
GC-83
N9300230
ICP-31
N9301222
GC-83
N9300231
ICP-32
N9301223
GC-83
N9300232
ICP-32
N9301225
GC-83
N9300233
ICP-32
N9301226
GC-83
N9300234
ICP-32
N9301227
GC-83
N9300235
ICP-32
N9301233
GC-83
N9300241
ICP-28
N9301253
GC-83
N9300253
AA-42
N9301254
GC-83
N9300260
AA-17
N9301255
GC-83
N9300280
ICP-28
N9301259
GC-83
N9300090
GC-94
N9300096
GC-40
N9300138
AA-49
N9300183
AA-48
N9300100
AA-48
N9300139
AA-49
N9300184
AA-48
N9300281
ICP-28
N9301266
GC-83
ICP-27
N9301001
LC-45
N9301267
GC-83
ICP-27
N9301002
LC-45
N9301268
GC-83
LC-45
N9301269
GC-83
N9301270
LC-2,
GC-87
N9300101
N9300137
AA-49
N9300182
AA-49
AA-48,
AA-51,
ICP-27,
ICP-30
N9300140
N9300142
AA-49
N9300202
ICP-27
N9301003
N9300141
AA-49
AA-49
N9300200
N9300201
N9300042
GC-83
N9300043
GC-83
N9300102
AA-48
N9300143
AA-49
N9300203
ICP-27
N9301004
LC-45
N9300044
GC-83
N9300103
AA-48
N9300144
AA-49
N9300204
ICP-27
N9301029
LC-46
ICP-27
N9301063
LC-46
N9301272
GC-29
GC-8
GC-83
N9300104
AA-48
N9300145
N9300047
GC-83
N9300105
AA-48
N9300146
AA-49
N9300208
ICP-27
N9301067
LC-46
N9301296
GC-83
N9300106
AA-48
N9300147
AA-49
N9300211
N9301068
LC-46
N9300049
GC-83
AA-48
N9300148
AA-49
N9301069
GC-83
AA-48
N9300149
AA-49
AA-50,
ICP-29
N9301299
N9300050
N9300108
N9300212
LC-3,
GC-87
TEA-33
GC-85
N9300107
AA-50,
ICP-29
N9301298
N9300048
GC-83
AA-48
N9300150
AA-49
GC-81
N9300051
N9300109
N9301166
TEA-33,
GC-85
N9300213
AA-48
GC-81
GC-87
AA-49
N9301167
N9301303
N9300151
AA-50,
ICP-29
N9301304
GC-87
AA-49
N9300214
AA-50,
ICP-29
N9301169
GC-81
N9301324
N9301170
GC-81
GC-86,
TEA-33
AA-50,
ICP-29
N9301171
GC-81
N9301325
GC-86
N9301172
GC-81
N9301328
GC-86
N9301176
GC-89,
TEA-36
N9301329
GC-86
N9301338
GC-81
N9301340
GC-81
N9300053
N9300054
N9300055
N9300056
N9300057
N9300058
GC-83
N9300110
AA-49
N9300205
N9300046
GC-83
N9300111
AA-48
N9300152
GC-15,
GC-83
N9300112
AA-48
N9300153
AA-49
N9300113
AA-48
N9300154
AA-49
GC-15,
GC-83
GC-83
GC-83
N9300114
N9300115
AA-48
AA-48
N9300155
N9300156
AA-49
AA-49
N9300116
AA-48
N9300157
AA-49
N9300117
AA-48
N9300158
AA-49
N9300215
N9300216
ICP-28
N9300217
ICP-28
N9300218
AA-51,
ICP-30
N9301177
GC-89
Index
IND-19
1.800.561.4646 Canada
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
N9301341
GC-81
N9302196
AA-44
N9302640
IR-5
N9302821
GC-95
N9302889
GC-92
N9303391
LC-28
N9301342
GC-81
N9302197
AA-44
N9302642
IR-2
N9302823
GC-94
N9302890
GC-92
N9303392
N9301343
GC-81
N9302198
AA-44
N9302643
IR-2
N9302825
GC-94
N9302895
GC-92
LC-28,
LC-39
N9301346
GC-81
N9302199
AA-44
N9302650
LC-46
N9302827
GC-94
N9302897
GC-91
N9303394
N9301354
GC-58,
GC-81
N9302202
GC-88
N9302675
LC-45
N9302832
N9302899
GC-91
N9302203
GC-88
N9302676
LC-45
N9302901
GC-91
N9303395
GC-14,
GC-58,
GC-81
GC-5,
GC-95,
GC-96
LC-28,
LC-40
N9302204
GC-88
N9302677
LC-48
N9302903
GC-91
LC-28,
LC-42,
LC-43
N9302210
GC-88
N9302678
LC-46
N9302905
GC-91
N9303396
LC-28
N9302908
GC-94
N9303429
GC-86
GC-87
N9301355
N9302680
LC-2,
GC-87
GC-88
N9302681
GC-87
N9302214
GC-88
N9302682
GC-87
N9302215
GC-88
N9302684
GC-58,
GC-81
N9302220
GC-88
LC-2,
GC-87
N9302222
GC-88
N9301360
GC-84
N9302224
GC-88
N9301361
GC-84
N9302226
GC-88
N9301366
GC-24
N9302228
GC-88
N9301356
N9301357
N9301358
N9301371
N9301373
N9301376
GC-5,
GC-58,
GC-81
GC-5,
GC-58,
GC-81
GC-85
GC-85
GC-29,
GC-82
N9302211
GC-88
N9302212
GC-88
N9302213
N9302685
N9302686
N9302698
N9302833
GC-96
N9302835
GC-95,
GC-96
N9302836
GC-96
N9302913
GC-94
N9303441
N9302838
GC-96
N9302914
GC-94
N9303442
GC-87
N9302917
GC-95,
GC-96
N9303445
AA-17,
AA-50
N9302918
GC-96
N9303448
GC-81
N9302919
GC-96
N9304012
GC-62
N9302920
GC-96
N9304013
GC-62
N9302921
GC-96
N9304014
GC-62
N9302922
GC-93,
GC-95
N9304016
GC-62
N9304017
GC-62
N9302945
GC-87
N9304018
GC-62
N9302946
ICP-26
N9304019
GC-62
N9302950
GC-92
N9304020
GC-62
N9302951
GC-92
N9304021
GC-62
N9302952
GC-92
N9304022
GC-62
N9302953
GC-92
N9304023
GC-62
N9302954
GC-92
N9304046
GC-62
N9302955
GC-92
N9304047
GC-62
N9302956
GC-92
N9304048
GC-62
N9302957
GC-92
N9305012
GC-62
N9302958
GC-92
N9305013
GC-62
N9302959
GC-92
N9305014
GC-62
N9302960
GC-92
N9305016
GC-62
N9302961
GC-92
N9305017
GC-62
N9302962
GC-92
N9305018
GC-62
N9302965
GC-92
N9305019
GC-62
N9302966
GC-92
N9305022
GC-62
N9302967
GC-92
N9305047
GC-62
N9302972
GC-20,
GC-29,
GC-30
N9305048
GC-62
N9306000
GC-84
N9302839
GC-96
N9302840
GC-96
N9302841
GC-96
N9302843
GC-96
LC-2,
GC-87
N9302844
GC-95
N9302846
GC-93
GC-32
N9302847
GC-93
LC-2,
GC-87
N9302230
GC-88
N9302736
UV-19
N9302848
GC-93
N9302560
LC-1
N9302751
AA-46
N9302849
GC-93
N9302561
LC-1
N9302780
GC-87
N9302850
GC-93
N9302562
LC-1
N9302781
GC-94
LC-2,
GC-87
N9302851
GC-92
N9302563
LC-1
N9302782
GC-15
N9302852
GC-92
N9301390
GC-87
N9302564
LC-1
N9302783
GC-15
N9302853
GC-92
N9301395
GC-29
N9302565
LC-1
N9302784
GC-87
N9302854
GC-92
N9301398
AA-44
N9302600
IR-18
N9302785
N9302855
GC-92
N9301399
AA-44
N9302603
IR-18
GC-3,
GC-87
N9302857
GC-92
N9301710
AA-44
N9302604
IR-18
N9302858
GC-92
N9301711
AA-44
N9302605
IR-18
N9301712
AA-44
N9302606
IR-18
N9301713
AA-44
N9302607
IR-18
N9301714
AA-44
N9302608
IR-18
N9301715
AA-44
N9302609
IR-18
N9302081
GC-84
N9302610
IR-18
N9302134
LC-2
N9302611
IR-18
N9302136
LC-2
N9302612
IR-18
N9302141
LC-2
N9302613
IR-18
N9302143
LC-2
N9302614
IR-18
N9302145
GC-97
N9302615
IR-18
N9302146
GC-97
N9302618
IR-15
N9302147
GC-98
N9302619
IR-18
N9302149
GC-6,
GC-81
N9302620
IR-5
N9302622
IR-18
N9301385
N9302800
GC-92
N9302802
GC-92
N9302803
GC-92
N9302808
GC-92
N9302809
GC-91
N9302810
GC-91
N9302811
GC-91
N9302812
GC-91
N9302813
N9302814
GC-91
GC-91
N9302859
GC-92
N9302860
GC-92
N9302862
GC-92
N9302866
GC-92
N9302867
GC-92
N9302868
GC-92
N9302871
GC-93
N9302872
GC-93
N9302879
GC-95
N9302880
GC-95
N9302815
GC-91
N9302816
GC-91
N9302881
GC-94
N9302817
GC-91
N9302882
GC-94
N9302974
GC-86
N9306001
GC-84
N9302818
GC-91
N9302885
GC-91
N9303314
GC-86
N9306002
GC-90
N9302819
GC-91
N9302886
GC-93
N9303343
GC-20
N9306003
GC-90
N9302820
GC-91
N9302887
GC-92
N9303368
LC-28
N9306004
GC-90
www.perkinelmer.com/essentials
Part No.
Index
www.perkinelmer.com/essentials
IND-20
1.800.762.4000 US
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
N9306005
GC-90
N9307002
N9316015
GC-50,
GC-79
N9316088
GC-51
N9316127
GC-52
GC-90
GC-50,
GC-55
N9316051
N9306006
GC-10,
GC-12
N9316089
GC-51
N9316128
GC-52
N9306014
GC-90
N9307003
N9316016
GC-50
N9316052
GC-50
N9316090
GC-51
N9316129
N9306015
LC-2,
GC-87
GC-10,
GC-12
N9316017
GC-50
N9316053
GC-50
N9316091
GC-51
GC-52,
GC-59
N9316018
GC-50
N9316054
GC-50
N9316092
GC-51
N9316130
GC-52
N9306016
AA-37
N9316019
GC-50
N9316056
GC-50
N9316093
GC-51
N9316131
GC-52
N9306017
LC-47
N9316020
GC-50
N9316057
GC-50
N9316094
GC-51
N9316132
GC-52
N9306019
LC-47
GC-50
N9316058
GC-50
LC-47
GC-51
GC-52
N9306020
N9316095
N9316133
N9306021
LC-47
N9306022
LC-49
N9306023
LC-49
N9306024
LC-49
N9306025
LC-49
N9306026
LC-49
N9306027
LC-49
N9306028
LC-49
N9306029
LC-49
N9306030
LC-49
N9306031
LC-49
N9306032
LC-49
N9306033
LC-49
N9306034
LC-49
N9306035
LC-49
N9306036
LC-49
N9306037
LC-49
N9306038
LC-49
N9306039
LC-49
N9307004
N9307005
GC-10,
GC-12
GC-10,
GC-12
N9307006
GC-10,
GC-12
N9316021
N9316022
GC-50
N9316061
GC-50
N9316096
GC-51
N9316134
GC-52
N9307007
GC-10,
GC-12
N9316023
GC-50,
GC-59
N9316062
GC-50
N9316097
GC-51
N9316135
GC-52
N9316063
GC-50
GC-10,
GC-12
N9316024
N9316064
GC-50
GC-52,
GC-59
GC-55
N9316137
GC-52
GC-10,
GC-12
N9316065
GC-51,
GC-59,
GC-60
N9307009
GC-50,
GC-59,
GC-60
N9316098
N9316136
N9307008
N9316025
GC-50
N9316066
GC-51
N9316099
GC-51
N9316138
GC-52
GC-10,
GC-12
N9316026
GC-50
N9316067
GC-51
N9316100
N9316139
GC-52
N9316068
GC-51
GC-52
GC-10,
GC-12
GC-50
N9316140
N9307011
N9316027
GC-51,
GC-59,
GC-60
N9316028
GC-50
N9316069
GC-51
N9316141
GC-52
GC-50
N9316071
GC-51
GC-52
GC-10,
GC-12
N9316029
N9316142
N9307012
N9316030
GC-50
N9316072
GC-51
N9316143
GC-52
GC-10,
GC-12
N9316031
GC-50
N9316073
N9316144
GC-52
N9316032
GC-50
N9316145
GC-52
N9316033
GC-50
N9316146
GC-52
N9316034
GC-50
N9316147
GC-52,
GC-69
N9316035
GC-50
N9316036
GC-50
N9316037
GC-50
GC-14
N9316038
GC-50
GC-50
N9307010
N9307013
N9307027
LC-2
N9307029
GC-86
N9307037
GC-10,
GC-12
N9307038
N9316000
GC-10,
GC-12
N9316101
GC-51,
GC-64
N9316102
GC-51,
GC-64,
GC-70
GC-51,
GC-77
N9316103
GC-51
N9316104
GC-51
N9316105
GC-51
GC-51,
GC-59,
GC-60,
GC-69,
GC-78
N9316108
GC-51
N9316148
GC-52
N9316109
GC-51
N9316149
GC-52
N9316110
GC-51
N9316150
GC-52
N9316111
GC-51
N9316151
GC-52
N9316077
GC-51,
GC-67
N9316112
GC-51
N9316152
GC-52,
GC-59
N9316153
GC-52,
GC-60
N9316172
GC-53
N9316173
GC-53
N9316074
N9316075
N9316076
GC-51
GC-51,
GC-77
LC-49
N9316001
GC-50
N9316039
N9306041
LC-49
N9316002
GC-50
N9316040
GC-50
N9316113
GC-52
N9306042
LC-49
N9316003
GC-50
N9316041
GC-50
N9316078
GC-51
N9316114
GC-52
GC-50
N9316079
GC-51
N9306040
LC-48
N9316004
GC-50
N9316042
N9316115
GC-52
N9306045
LC-48
N9316005
GC-50
N9316043
GC-50
N9316080
GC-51
N9316116
GC-52
N9306046
LC-48
N9316006
GC-50
N9316044
GC-50
N9316081
GC-51
N9316117
GC-52
N9306047
LC-48
N9316007
GC-50
N9316045
GC-50
N9316082
GC-51
N9316118
GC-52
N9306044
N9306048
GC-90
N9316008
GC-50
N9306050
GC-90
N9316009
GC-50
N9306051
GC-90
N9316010
GC-50
N9306052
LC-2
N9316011
GC-50
N9306053
LC-2
N9316012
GC-50
N9307000
GC-10,
GC-12
N9316013
GC-50,
GC-71
GC-10,
GC-12
N9316014
N9307001
GC-50
N9316046
GC-50,
GC-59,
GC-60
N9316047
GC-50
N9316048
GC-50
N9316049
N9316050
GC-53
N9316175
GC-53,
GC-73
N9316083
GC-51
N9316119
GC-52
N9316084
GC-51
N9316120
GC-52
N9316085
GC-51
N9316176
GC-53
N9316121
GC-52
N9316086
GC-51,
GC-59,
GC-60,
GC-73
N9316177
GC-53
N9316122
GC-52
N9316178
GC-53
N9316123
GC-52
N9316179
GC-53
N9316124
GC-52
N9316180
GC-53
GC-51,
GC-59,
GC-60
N9316125
GC-52
N9316181
GC-53
N9316126
GC-52
N9316182
GC-53
GC-50
GC-50,
GC-59,
GC-60
N9316174
N9316087
Index
IND-21
1.800.561.4646 Canada
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
N9316183
GC-53
N9316215
GC-53
N9316256
GC-54
N9316294
N9316393
GC-52
GC-53
N9316216
GC-53
N9316257
GC-54
N9316438
GC-52
GC-53
N9316217
GC-53
N9316258
GC-54
N9316295
GC-51
N9316439
GC-52
N9316296
GC-51,
GC-59
GC-56,
GC-59,
GC-60,
GC-66
N9316437
N9316184
GC-51,
GC-60
N9316394
GC-56
N9316440
GC-52
N9316297
GC-51
N9316395
GC-56
N9316441
GC-52
N9316298
GC-51
N9316396
GC-56
N9316442
GC-52
N9316299
GC-51,
GC-59
N9316398
GC-56
N9316443
GC-52
N9316399
GC-56
N9316444
GC-52
GC-51,
GC-59,
GC-60
N9316400
GC-56
N9316445
GC-52
N9316401
GC-56
N9316446
GC-52
N9316402
GC-56
N9316447
GC-58
N9316403
GC-56
N9316448
GC-58
N9316404
GC-56,
GC-75
N9316449
GC-58
N9316450
GC-58
N9316185
N9316186
GC-53
N9316218
GC-53
N9316259
GC-54
N9316187
GC-53
N9316219
GC-53
N9316260
GC-54
GC-55
GC-55
GC-53
N9316220
GC-53
N9316261
N9316189
GC-53
N9316221
GC-53
N9316262
N9316190
GC-53,
GC-59,
GC-76,
GC-79
N9316222
GC-53
N9316263
GC-52
N9316223
GC-53
N9316264
GC-52
N9316224
GC-53
N9316265
GC-52
N9316225
GC-53
N9316266
GC-52
N9316226
GC-53
N9316267
GC-52
N9316301
GC-51
GC-53
N9316227
GC-53
N9316268
GC-50
N9316302
GC-51
GC-53
N9316228
GC-54
N9316269
GC-50
N9316303
GC-51
GC-54
N9316270
GC-50
N9316304
GC-57
N9316405
GC-56
N9316451
GC-58
GC-50
N9316305
GC-57
N9316188
N9316191
N9316192
N9316193
N9316194
GC-53,
GC-59
GC-53
N9316229
N9316300
GC-53
N9316230
GC-54
N9316271
N9316406
GC-56
N9316452
GC-58
GC-53
N9316231
GC-54
N9316272
GC-51
N9316319
GC-54
N9316407
GC-56
N9316453
GC-58
GC-53,
GC-59,
GC-60
N9316232
GC-54
N9316273
GC-51
N9316345
GC-55
N9316408
GC-56
N9316454
GC-58
GC-54,
GC-59
N9316274
GC-51
N9316346
GC-55
N9316409
GC-56
N9316455
GC-58
N9316275
GC-51
N9316347
GC-55
N9316410
GC-56
N9316198
GC-53
N9316456
GC-58
N9316235
GC-54
N9316276
GC-51
N9316348
GC-55
N9316411
GC-56
N9316199
GC-53
GC-51
GC-58
GC-54
N9316277
N9316457
N9316236
N9316349
GC-55
N9316412
GC-56
N9316200
GC-53
GC-54
GC-51
GC-58
N9316237
N9316278
N9316458
N9316350
GC-55
N9316413
GC-56
N9316201
GC-53,
GC-59
GC-51
GC-58
GC-54
N9316279
N9316459
N9316238
N9316351
GC-54
N9316416
GC-56
GC-51
GC-58
GC-54
N9316280
N9316460
N9316239
N9316352
GC-54
N9316417
GC-56
N9316461
GC-58
N9316195
N9316196
N9316197
N9316234
N9316202
GC-53
N9316240
GC-54
N9316281
GC-51
N9316353
GC-54
N9316203
GC-53
N9316462
GC-58
N9316354
GC-54
N9316204
GC-53
N9316419
GC-56
N9316242
GC-54
GC-51,
GC-59
GC-56
GC-54
N9316282
N9316418
N9316241
N9316463
GC-58
N9316355
GC-54
N9316420
GC-56
N9316243
GC-54,
GC-59
N9316464
GC-58
N9316356
GC-54
N9316421
GC-56
N9316465
GC-58
N9316357
GC-54
N9316422
GC-56
N9316466
GC-58
N9316358
GC-54
N9316423
GC-56
N9316467
GC-58
N9316359
GC-57,
GC-80
N9316425
GC-56
N9316468
GC-58
N9316426
GC-56
N9316469
GC-58
N9316427
GC-56
N9316470
GC-58
N9316428
GC-56
N9316471
GC-58
N9316429
GC-56
N9316472
GC-58
N9316430
GC-56
N9316473
GC-58
N9316431
GC-56
N9316474
GC-58
N9316432
GC-56
N9316475
GC-58
N9316433
GC-56
N9316476
GC-58
N9316434
GC-56
N9316477
GC-58
N9316435
GC-56
N9316478
N9316436
GC-52
GC-58,
GC-74
N9316205
N9316206
N9316207
N9316208
GC-53
GC-53,
GC-59,
GC-68
GC-53,
GC-59,
GC-60
GC-53,
GC-59,
GC-60,
GC-67
N9316209
GC-53
N9316210
GC-53
N9316211
GC-53
N9316212
GC-53
N9316213
GC-53
N9316214
GC-53
N9316244
GC-54
N9316245
GC-54
N9316246
GC-54
N9316248
GC-54
GC-54
N9316250
GC-54
N9316251
GC-54
N9316252
GC-54
N9316253
N9316284
GC-54
N9316247
N9316249
N9316283
GC-54
N9316254
GC-54
N9316255
GC-54,
GC-59,
GC-60
GC-51,
GC-59,
GC-60
GC-51,
GC-60,
GC-65
N9316285
GC-51,
GC-59
N9316360
GC-57
N9316286
GC-51
N9316361
GC-57
N9316287
GC-51
N9316386
GC-55
N9316288
GC-51
N9316387
GC-55
N9316289
GC-51
N9316388
GC-56
N9316290
GC-51
N9316389
GC-56
N9316291
GC-51
N9316390
GC-56
N9316292
GC-51
N9316391
GC-56
N9316293
GC-51,
GC-59,
GC-60
N9316392
GC-56,
GC-59,
GC-60
www.perkinelmer.com/essentials
Part No.
Index
www.perkinelmer.com/essentials
IND-22
1.800.762.4000 US
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
N9316479
GC-58
N9316549
GC-56
PELA1003
UV-15
PELA9058
S5010030
GC-56
N9316550
GC-56
PELA1004
UV-15
LC-22,
GC-46
N9316481
GC-56
N9316551
GC-56,
GC-72
PELA1005
UV-15
S2000203
GC-44
LC-23,
GC-27,
GC-48
S9000402
N9316480
UV-10,
UV-18
S9000405
UV-15
GC-44
S5010031
PELA1006
S2000204
LC-23,
GC-48
LC-22,
GC-46
PELA1007
UV-15
S2000205
GC-44
WE012411
ICP-20
S5010032
PELA1008
UV-15
S2000206
GC-44
LC-23,
GC-48
WE012989
ICP-20
PELA1009
UV-15
S2700055
LC-20
S5010033
WE013060
ICP-19
PELA1010
UV-15
S2700056
LC-20
LC-23,
GC-48
WE013087
ICP-20
PELA1011
UV-15
S2701017
GC-28
PELA1012
UV-15
S2701018
GC-28
PELA1013
UV-15
S2701021
LC-20
PELA1014
UV-15
S2701116
GC-28
PELA1015
UV-15
S2701610
GC-28
PELA1016
UV-15
S5010002
PELA1020
UV-12
S5010013
PELA1021
UV-12
PELA1022
UV-12
PELA1025
UV-14
PELA1026
UV-14
PELA1029
UV-13
PELA1030
UV-13
PELA1034
UV-13
PELA9010
UV-10
PELA9012
UV-10
PELA9013
UV-10
PELA9018
UV-10
PELA9019
UV-10
N9316482
GC-56
N9316483
GC-56
N9316552
N9316484
GC-56
N9316553
GC-56
N9316485
GC-56
N9316554
GC-56
N9316487
GC-56
N9316555
GC-56
N9316488
GC-56
N9316556
GC-56
N9316489
GC-56
N9316557
N9316490
GC-56
GC-56,
GC-72
N9316491
GC-56
N9316558
GC-56
N9316492
GC-56
N9316493
GC-56
N9316494
GC-56
N9316495
GC-56
N9316496
GC-56
N9316497
GC-56
N9316498
GC-53
N9316520
GC-55
N9316521
GC-55
N9316534
GC-52
N9316535
GC-52
N9316536
GC-52
N9316537
GC-52
N9316538
GC-52
N9316539
GC-52
N9316559
GC-56
GC-56
N9316560
GC-56
N9316561
GC-56
N9316562
GC-56
N9316563
GC-56
N9316564
GC-56
N9316565
GC-56
N9316566
GC-56
N9316567
GC-56
N9316568
GC-56
N9316569
GC-56
N9316570
GC-56
N9316571
N9316572
GC-56,
GC-74,
GC-75
GC-55
N9316540
GC-52
N9316573
GC-49
PELA9020
UV-10
N9316541
GC-52
N9316574
GC-49
PELA9021
UV-10
N9316542
GC-52
N9316575
GC-49
PELA9026
UV-15
N9316543
GC-52
N9316576
GC-49
PELA9033
UV-15
N9316544
GC-57
N9316577
GC-49
PELA9038
UV-12
N9316545
GC-57
N9316578
GC-49
PELA9039
UV-12
N9316546
GC-57
N9316579
GC-49
PELA9040
UV-12
N9316547
GC-56
PELA1000
UV-12
PELA9048
UV-12
N9316548
GC-56
PELA1001
UV-15
PELA9057
UV-10
S5010015
S5010016
S5010017
S5010018
S5010019
S5010020
S5010021
S5010022
S5010023
S5010024
S5010025
S5010034
LC-23,
GC-48
WE013119
ICP-19
WE013829
ICP-22
S5010035
LC-23,
GC-48
WE014081
ICP-19
S5010036
LC-23,
GC-48
WE014777
ICP-18
WE016558
ICP-18
LC-23
S5010037
WE017142
ICP-18
LC-23,
GC-48
LC-23,
GC-48
WE018034
ICP-18
S5010038
WE018378
ICP-22
LC-23,
GC-48
LC-23,
GC-48
WE018381
ICP-18
S5010039
WE021137
ICP-18
LC-23,
GC-48
LC-23,
GC-48
S5010040
WE021140
ICP-18
LC-23,
GC-48
LC-23,
GC-48
WE021816
ICP-18
S5010041
WE023257
ICP-18
LC-23,
GC-48
LC-23,
GC-48
WE023948
ICP-18
S9000018
LC-22,
GC-46
WE023951
ICP-18
WE024081
ICP-19
WE024371
ICP-18
LC-23,
GC-48
S9000019
LC-23,
GC-48
S9000070
WE024372
ICP-18
LC-23,
GC-48
LC-22,
GC-46
WE024375
ICP-18
S9000075
WE025221
ICP-18
LC-23,
GC-48
GC-46,
LC-22
WE025239
ICP-18
S9000090
WE025609
ICP-18
LC-23,
GC-48
LC-22,
GC-46
S9000095
LC-22,
GC-46
WE027005
ICP-18
WE027030
ICP-18
WE027802
ICP-18
WE027803
ICP-18
LC-22,
GC-46
LC-23,
GC-48
S9000160
LC-23,
GC-27,
GC-48
LC-22,
GC-47
S9000165
LC-22,
GC-47
Terms and
Conditions of Sales
Terms and Conditions of Sales
T&C-2
1.800.762.4000 US
www.perkinelmer.com/essentials
1. Delivery Dates and Prices.
a) All delivery and shipment dates indicated on the
face hereof are approximate and subject to Seller’s
availability schedule. Seller will make reasonable
efforts to meet the delivery date(s) quoted.
However, Seller will not be liable for its failure to
meet the quoted delivery dates or for any delay in
performance hereunder due to unforeseen
circumstances or shortages, due to causes beyond
its control, or due to its voluntary or mandatory
compliance with any governmental act, regulation,
or request. If, by reason of such circumstances,
Seller’s supplies of the equipment or service
(hereafter the “Product(s)”) covered hereby are
limited, Seller shall have the right to allocate the
available supply among its customers in such
manner as it, in its sole discretion, determines
appropriate.
b) All orders are priced on the basis of an estimated
shipment date within ninety (90) days of the date
of order to the stated destination. Should Buyer
request a change in the estimated shipment date or
otherwise cause delay in delivery beyond ninety
(90) days from the date of order or request that the
Products be shipped outside the country of original
delivery, the prices established by this quote shall
no longer apply, and Seller’s list prices in effect on
the actual date of shipment shall be used in determining the price to be paid. Except as provided
above, if the price is stated by reference to a
published price list, then the price shall be the price
on the published price list in effect at the time Seller
receives Buyer’s purchase order, without regard to
the requested delivery date. However, if any
Product is ordered prior to the effective date of a
published price change and the delivery date is
rescheduled, the price in effect at the time of the
initial delivery date shall apply.
c) If Buyer requests shipment to a country other
than the country originally requested, and if Seller
elects not to cancel the order subject to Section 12
hereof, Seller’s applicable surcharge for the actual
country of delivery shall be added to the price.
d) Notwithstanding any provision to the contrary
herein, all prices are subject to increase without
notice to reflect changes in: (1) Federal or State
laws taxing raw material or processed materials; (2)
applicable laws or regulations governing working hours or compensation of labor; or (3) freight
charges, insurance costs, duty or other factors
affecting costs of shipment.
2. Packing and Loss or Damage in Transit.
Products will be packed for shipment in a manner
suitable to the method of shipment specified by Buyer,
or to the method selected by Seller in the absence of
instructions. Unless otherwise indicated on the face
hereof, all sales hereunder are f.o.b. shipping point, and
all risk of loss or damage to equipment in transit is upon
Buyer. Payment will be made in accordance with
Paragraph 5 below.
3. Payment Due For Partial Deliveries.
Seller may, in its sole discretion, deliver any portion of
the Products ordered, regardless of utility to Buyer in
the absence of the undelivered portion, and all such
partial deliveries shall be accepted and paid for in
accordance with the terms of Paragraphs 4 and 5 below.
Likewise, completion of any installation services shall
not be a condition to Buyer’s obligation to remit
payment. The making of a partial delivery that, to any
extent, is not in accordance with the contract of sale
shall not affect the Buyer’s obligation hereunder to
remit payment.
4. Inspection, Acceptance and Return
of Products or Trade-Ins.
Buyer shall inspect the Products immediately on their
arrival and shall within five (5) days after arrival give
written notice to the Seller of any claim for shortage or
that the Products do not conform with the terms of the
contract of sale. If the Buyer shall fail to give such notice,
the Products shall be deemed accepted and to conform
with the terms of the contract of sale and the Buyer shall
be bound to pay for the Products in accordance with the
terms of Paragraph 5 below. Return of Products,
defective or otherwise, will not be accepted by Seller
without notification from Buyer to Seller within 30 days
of receipt of invoice and with subsequent authorization
of Seller. Products authorized to be returned shall be
shipped f.o.b. destination, freight prepaid. When return
of nonconforming goods has been accepted by Seller,
conforming shipment may be made in accordance with
Paragraph 1 above and Paragraph 8 below without
further liability on Seller’s part. Buyer will be liable for
restocking charges in the event Products are returned to
the Seller which are not defective and are in accordance
with these terms. When a trade-in is authorized by
Seller, Buyer shall ship, f.o.b. destination, freight prepaid, the material or equipment so authorized for tradein, to Seller’s specified location.
for collection of delinquent accounts, Buyer shall pay all
costs of collection including reasonable attorney’s fees.
Buyer agrees that Seller shall retain a security interest in
the Products sold hereunder to secure any portion of the
price not paid on delivery and will, on request, execute a
security agreement in such form as is required by Seller,
which, at Seller’s option, may be filed with appropriate
local, state, or other relevant authorities. Should Buyer
become delinquent in the payment of any sum due
hereunder, or if Buyer becomes insolvent, or if any
proceedings are commenced under any bankruptcy or
similar laws for Buyer’s reorganization or other debt
adjustment, Seller will not be obligated to continue
performance. Seller reserves the right to change the
credit terms provided herein when, in Seller’s opinion,
the financial condition or previous payment record of
Buyer so warrants. If, within 30 days, Buyer fails to
agree and comply with different terms of credit, and/or
fails to give adequate assurance of due performance,
Seller may (a) by notice to Buyer, treat such failure or
refusal as a repudiation by Buyer of the portion of the
purchase order not then fully performed, whereupon
Seller may cancel all further deliveries and any amounts
unpaid hereunder shall immediately become due and
payable; (b) make shipments under reservation of a
demand for advance payment or payment against
tender of documents of title. Buyer’s acceptance of
delivery of any Products shall constitute a representation that Buyer is solvent.
6. Taxes.
Buyer is responsible for the ultimate payment of all
taxes which may be assessed or levied on or on account
of materials sold hereunder to the Buyer whether
termed a gross receipts tax, use tax, property tax, sales
tax or otherwise. Where Buyer claims that a transaction
is not subject to any such tax, that Buyer is exempt, or
that Seller is not required to collect such tax, Buyer
agrees to provide Seller with any documentation
necessary to support such a claim, to allow Seller to
document its decision not to collect such tax (es), and to
indemnify and hold Seller harmless from and against
any and all fines, penalties, interest, taxes, and other
expenses, including reasonable attorney’s fees, incurred
by Seller as a result of reliance upon Buyer’s position.
5. Payment and Credit Terms.
Unless otherwise indicated on the face hereof, Buyer
agrees to remit payment in full to the address provided
on the face of Seller’s invoice for all shipments,
including shipments of any portion of the Products
ordered, upon receipt of invoice. This obligation shall
not be contingent upon the completion of any
installation services included in the purchase price. No
cash discounts will be granted. Account balances not
paid in accordance with these terms, are subject to the
maximum prevailing legal interest rate calculated from
date of delinquency. In the event Seller finds it
necessary to refer an account to an attorney or an agent
7. Installation and Site Preparation.
Installation services are included in the purchase price of
the Products sold hereunder only if expressly so stated
on the face of Seller’s quotation or in Seller’s applicable
price list. Installation services for Products transferred
outside the country of original delivery by Buyer’s
actions may be subject to additional charges based on
the actual installation site location. For Products
requiring installation by Seller’s service personnel, it is
the responsibility of the Buyer to prepare the site
environmentally and provide the required services,
power, water, drain, air, bottled gases, permits,
Terms and Conditions of Sales
8. Limited Warranty.
a) Warranty.
i) Except as otherwise provided herein, Seller
warrants to Buyer that the Products sold to
Buyer are, at the time of shipment to Buyer from
Seller, free from defects in material and
workmanship.
ii) This warranty shall be valid for a period of 90
days from the date of shipment to Buyer, unless
a different period is specified herein, or in
Seller’s applicable price list in which case the
specified period shall apply. Notwithstanding
anything to the contrary contained herein, the
warranty period for data processing equipment,
including data storage devices, processors,
printers, terminals, communication interfaces,
tape drives and all similar devices, is in all cases
limited to ninety (90) days from the date of
shipment to Buyer.
iii) Except in the case of an authorized distributor of Seller, authorized in writing by Seller to
extend this warranty to the distributor’s
customers, the warranty herein applies only to
Buyer as the original purchaser from Seller and
may not be assigned, sold or otherwise
transferred to any third party.
iv) As Buyer’s sole and exclusive remedy under
this warranty, Seller agrees either to repair or
replace, at Seller’s sole option, any part or parts
of such Products which, under proper and normal conditions of use, prove(s) to be defective
within the applicable warranty period.
Alternately, Seller may at any time, in its sole
discretion, elect to discharge its warranty
obligation hereunder by accepting the return of
any defective Product pursuant to the terms set
forth herein and refunding the purchase price
paid by Buyer.
b) Exclusions and Limitations.
i) It is recognized that some parts by their nature
may not function for the warranty period
applicable to the Product. Therefore, excluded
from the warranty herein are chromatography
columns, filaments, energy sources, lamps,
power amplifier tubes, graphite tubes, sample
cell holders, burner and furnace chambers,
nebulizers, and other similar parts referenced in
the applicable operating manual.
ii) The warranty herein excludes any equipment
or accessories which are identified on applicable
price lists, quotations, special promotional
materials, or on the face hereof, for which this
limited warranty may be further limited.
Included within this category are items
produced by third party manufacturers (as to
which Seller passes to Buyer the warranty it has
been provided by the manufacturer) and items
which are sold at specially reduced prices with
reduced warranty protection (in some cases,
extended warranty protection may be available
at an increased price).
iii) This warranty does not cover loss, damage, or
defects resulting from: transportation to the
Buyer’s facility, improper or inadequate
maintenance by Buyer, Buyer-supplied software
or interfacing, unauthorized modification or
misuse, operation outside of the environmental
specifications for the Product or improper site
preparation or maintenance.
iv) No warranty is made with respect to used,
reconstructed, refurbished or previously owned
Products, which will be so marked on the face
hereof and, unless otherwise indicated on the
face hereof, shall be sold “As Is”.
v) The warranty herein applies only to Products
within the country of original delivery. Products
transferred outside the country of original
delivery, either by Seller at the direction of Buyer
or by Buyer’s actions subsequent to delivery,
may be subject to additional charges prior to
warranty repair or replacement of such Products
based on the actual location of such Products
and Seller’s warranty and/or service surcharges
for such location(s).
c) Place of Service.
Except when otherwise provided in Seller’s current
applicable price list, Seller shall use its best efforts
to perform all warranty services hereunder at the
Buyer’s facility, as soon as reasonably practicable
after notification by the Buyer of a possible defect;
provided, however, that Seller reserves the right
to require that the Buyer return the Product to
Seller’s production facility, transportation charges
prepaid, when necessary to provide proper warranty service.
d) Software and Firmware Products.
The sole and exclusive warranty applicable to
software and firmware products provided by Seller
for use with a processor will be as follows: Seller
warrants that such software and firmware will
conform to Seller’s program manuals current at the
time of shipment to Buyer when properly installed
on that processor, provided however that Seller
does not warrant that the operation of the processor or software or firmware will be uninterrupted
or error-free.
NO OTHER WARRANTY IS EXPRESSED OR IMPLIED.
SELLER EXPRESSLY DISCLAIMS THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
9. Exclusive Remedies.
THE REMEDIES PROVIDED HEREIN ARE BUYER’S SOLE
AND EXCLUSIVE REMEDIES. SELLER SHALL NOT BE LIABLE
FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, WHETHER BASED ON
CONTRACT, TORT, OR OTHER LEGAL THEORY ARISING
OUT OF THE SALE, INSTALLATION, SERVICE OR USE OF ITS
PRODUCTS. SELLER NEITHER ASSUMES NOR AUTHORIZES
ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER
LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, SERVICE OR USE OF ITS PRODUCTS.
10. Patent Indemnity.
Seller agrees to defend, at its own expense, any suit or
legal proceeding which may be brought against Buyer
alleging infringement by Buyer of any patent of the
United States, by Buyer’s use of the Product sold
hereunder for its intended purposes, provided that
Buyer shall give Seller prompt written notice of any
claim, threat, or institution of suit or legal proceeding,
and provided that Seller shall then have the sole right to
control and conduct the defense and/or settlement of
such claim, threat, suit or legal proceeding, either in the
name of Seller or Buyer or both, and Buyer shall, at
Seller’s request and expense, provide relevant
information and reasonable cooperation. Seller shall
pay all final judgments and all costs and attorney’s fees
assessed against Buyer in any such suit or legal
proceeding, provided Buyer has complied with the
conditions hereof with respect to prompt notice and
cooperation in connection with such suit or legal proceeding and given exclusive control thereof to Seller,
but Seller shall not be liable for any attorney’s fees or
other legal expenses incurred by Buyer without the
knowledge and prior written consent of Seller. Seller
shall also have the right, at its own expense, to procure
for Buyer the right to continue using the Product
claimed to infringe, replace said Product with an equally
satisfactory non-infringing Product, modify said Product
so that it becomes non-infringing, or remove such
Product and refund the purchase price thereof less a
reasonable amount for use, damage or obsolescence.
www.perkinelmer.com/essentials
licenses, approvals, etc., as well as whatever is required
to uncrate and move the Product to its location. Failure
to do so will result in a service charge by Seller to cover
the lost time of its service personnel. Because Seller’s
service personnel may be required to enter upon Buyer’s
premises for the purpose of providing service to the
Product sold hereunder, Buyer hereby undertakes to
maintain its premises in a safe condition and to comply
with all applicable laws, statutes and regulations
governing workplace health and safety, and hereby
accepts full responsibility for any harm, injury, or
liability to Seller’s personnel while on Buyer’s premises,
except to the extent caused solely by the negligence of
Seller’s personnel. Seller’s sales and service personnel
are not authorized to enter into any indemnity or hold
harmless agreements on behalf of Seller. Seller will not,
in any event, indemnify, defend or hold Buyer harmless
from any liability that it may incur to Seller’s sales and
service personnel.
T&C-3
1.800.561.4646 Canada
Terms and Conditions of Sales
T&C-4
1.800.762.4000 US
www.perkinelmer.com/essentials
The foregoing indemnity fully defines Seller’s obligation
for patent infringement; such obligations to defend and
make payment shall specifically not apply to:
a) an infringement claim resulting from additions
or changes in or to the Product made by Buyer or
any third party or from use in combination with
other equipment; or
b) an infringement claim which is settled without
the consent of Seller; or
c) an infringement claim which results from
compliance by Seller with specifications furnished
by Buyer.
The total amount of Seller’s obligation and liability
under this Section shall not exceed the price paid by
Buyer to Seller for the Product held to infringe, and in no
event will Seller be held accountable for consequential
damages under this indemnity, such as, for example,
loss of business profits or goodwill. With respect to
goods manufactured in whole or in part to Buyer’s
specifications, the Buyer will protect and indemnify
Seller against all claims for damages or profits arising
from infringement of patents, designs, copyrights or
trademarks.
11. Modification of Terms.
BUYER’S ACCEPTANCE OF ANY QUOTATION IS EXPRESSLY
SUBJECT TO BUYER’S ASSENT TO EACH AND ALL OF THE
TERMS AND CONDITIONS SET FORTH IN SELLER’S
QUOTATION, AND BUYER’S ASSENT TO THESE TERMS
AND CONDITIONS SHALL BE CONCLUSIVELY PRESUMED
FROM BUYERS SUBMISSION OF ITS PURCHASE ORDER.
NO ADDITION TO OR MODIFICATION OF SAID TERMS AND
CONDITIONS SHALL BE BINDING UPON SELLER UNLESS
SPECIFICALLY AGREED TO BY SELLER IN WRITING. IF
BUYER’S PURCHASE ORDER OR OTHER CORRESPONDENCE
CONTAINS TERMS OR CONDITIONS CONTRARY TO OR IN
ADDITION TO THE TERMS AND CONDITIONS CONTAINED
IN SELLER’S QUOTATION, ACCEPTANCE OF ANY ORDER BY
SELLER SHALL NOT BE CONSTRUED AS ASSENT TO SUCH
CONTRARY OR ADDITIONAL TERMS AND CONDITIONS OR
CONSTITUTE A WAIVER BY SELLER OF ANY OF THE TERMS
AND CONDITIONS CONTAINED IN SELLER’S QUOTATION.
12. Authority to Export.
ALL ORDERS ACCEPTED FOR EXPORT (AND/OR REEXPORT) ARE SUBJECT TO: 1) UNITED STATES
GOVERNMENT EXPORT REGULATIONS AND; 2) BUYER
PROVIDING SELLER WITH ALL DOCUMENTATION
NECESSARY FOR SHIPMENT TO THE DESTINATION
COUNTRY.
13. Software Licenses and Copyrighted Material.
a) Seller provides software products by license
only. The terms of the license are available from
Seller and are accepted by Buyer on delivery of
licensed software.
b) Unless otherwise specified, Seller’s copyrighted
material (software, firmware, and printed documentation) may not be copied except for archive
purposes, to replace a defective copy, or for program error verification by Buyer.
14. Miscellaneous.
a) Applicable laws. This contract shall be construed in accordance with the laws of the State of
New York, U.S.A. without regard to its principles of
conflict of laws. Any disputes relating to the
contract of sale between Buyer and Seller shall be
adjudicated in the state or federal courts in the
State of New York, U.S.A., and both parties hereby
consent to the jurisdiction of said courts for purposes of any such litigation. The parties expressly
agree to waive application of the United Nations
Convention on Contracts for the International Sale
of Goods.
b) Confidential Data and Information. If, in connection with the sale, purchase, use, or maintenance of the Products, Seller is requested,
required, or deems it advisable to furnish data or
information which it, in its sole discretion, deems
proprietary, confidential, or both, Seller shall not,
in any event, submit or be required to furnish such
data or information unless Buyer enters into an
agreement concerning the handling, use, copying,
retention and return of such information, the form
of which agreement is available to Buyer on
request. Seller does not agree to accept any
proprietary or confidential information of Buyer in
the absence of such a written agreement signed
by an authorized representative of Seller.
c) Assignment. Any attempt by Buyer to assign,
transfer or delegate any of the rights, duties, warranties, or obligations herein shall be null and void.
d) Non-waiver. Seller’s failure to exercise any of its
rights shall not constitute or be deemed a waiver
or forfeiture of such rights.
e) Successors. Any contract for sale incorporating
Seller’s terms and conditions shall be binding
upon the parties thereto, their successors and
permitted assigns.
f) Headings. The headings herein are for convenience only and have no substantive meaning.
g) Severability. If any provision herein is deemed
unenforceable by a court of competent jurisdiction, the other provisions shall remain in full force
and effect as if the unenforceable provision had
not been included.
PerkinElmer is a trademark of PerkinElmer, Inc.
e-ssentials is a trademark of PerkinElmer Instruments, LLC. All other product and company names
mentioned herein may be the trademarks or registered trademarks of their respective owners.
PerkinElmer is not responsible for typographical
or photographic errors that may appear in this
catalog. We reserve the right to make adjustments
or corrections due to changing market conditions,
product discontinuations, or typographical or
photographic errors in advertisements or product
descriptions. Policies, item availability, and prices
are subject to change without notice.
www.perkinelmer.com/essentials
©2002 PerkinElmer, Inc. All rights reserved. PerkinElmer is a trademark of
PerkinElmer, Inc. e-ssentials is a trademark of PerkinElmer Instruments, LLC.
PerkinElmer Instruments
710 Bridgeport Avenue
Shelton, CT 06484-4794 USA
Phone: (800) 762-4000 or (+1) 203-925-4600
www.perkinelmer.com/instruments
D-6613 WP30240
Printed in the USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement