3 - Aquafax.co.uk
Mastervolt Contents
Mastervolt
Electrical
Products
2-5
6-7
8-9
10-11
12-13
14-15
16-17
18-21
22
23-26
27-28
29-30
31
32-33
34-35
36
ChargeMaster Battery Chargers
Mass Battery Chargers
AC Master Sine Wave Inverters
MassSine Sine Wave Inverters
Mass Combi Inverter Chargers
DC Master Converters
Mac & Magic Converters
AGM, Gel & 2 Volt Batteries
& Accessories
MasterView Panels
MasterBus System & Accessories
Circuit Breaker Switches,
MasterVision System & Control Panels,
Function Switches, Switchboard,
Alternators & Regulators
AC Transfer Systems
Isolation Transformers
Electric Propulsion
Five Depots Nationwide
Aquafax Limited, 14 Dencora Way, Sundon Business Park, Luton, Beds LU3 3HP
Aquafax Ltd. (Hamble), 1-2 Mitchell Point, Ensign Business Park, Hamble, Southampton SO31 4RF
Aquafax Ltd. (Plymouth), Unit 5 Plymouth Trade Park, 22 Macadam Road, Plymouth PL4 0RU
Aquafax Ltd. (Middlewich), Unit 11, Valley Court, Sanderson Way, Middlewich, Cheshire CW10 0GF
Aquafax Ltd. (Wroxham), Unit 31, Stalham Road Ind. Estate, Littlewood Lane, Hoveton, Norfolk NR12 8DZ
CATALOGUE B
Tel:(01582) 568700
Tel:(023) 80457206
Tel:(01752) 669944
Tel:(01606) 841111
Tel:(01603) 781881
MASTERVOLT
Fax:(01582) 568720
Fax:(023) 80457208
Fax:(01752) 667764
Fax:(01606) 841188
Fax:(01603) 781981
1
Mastervolt ChargeMaster
Battery Chargers 12V
CHARGEMASTER BATTERY CHARGERS
CHARGEMASTER BATTERY CHARGERS - 12V
The ChargeMaster is suitable for recreational and
semi-professional use. Easy to install, it includes a
detailed display and easy three-button controls.
The ChargeMaster safely charges multiple battery
banks at the same time.
3STEP + charging memory ensures more power
and a longer life for your batteries.
Part No.
GENERAL SPECIFICATIONS
Model:
Nominal Output Voltage:
Total Charge Current:
No. of Battery Outlets:
Charge Current Second Output:
Charge Current Third Output:
Recommended Battery Capacity:
Nominal Input Voltage:
Supplies Your System Without Battery:
Display/read-out:
Dimensions (H x W x D in mm):
Dimensions (H x W x D in inch):
Weight:
Approvals:
TECHNICAL SPECIFICATIONS
Charge Characteristic** :
Charge Voltage Bulk (25ºC)***:
Charge Voltage Absorption (25ºC)***:
Charge Voltage Float - wet (25ºC)***:
Laadspanning Float - Gel/AGM (25ºC)***:
Temperature Compensation:
Voltage Compensation:
DC Consumption:
Full Load Consumption (230V AC):
Cos Phi:
Temperature Range (ambient temp.):
Cooling:
Sound Level:
Protection Degree:
Protections:
MasterBus Compatible:
CSI/DC Alarm:
M43011000
M43011500
12/10
12/15-2
12V
12V
10A at 14.25V
15A at 14.25V
1
2
n/a
15A
n/a
n/a
25 - 100Ah
30 - 150Ah
------- 230V (180-265V) -50/60 Hz -------No
No
1 LED
1 LED
180 x 121 x 50mm
206 x 121 x 50mm
7.1 x 4.8 x 2''
8.1 x 4.8 x 2''
1kg (2.2lbs)
1kg (2.2lbs)
---------- CE, E-mark, ABYC A-31 ----------
M44010250
12/25-3
12V
25A at 13.25V
3
25A
25A
50 - 250Ah
120/230V (90-265V) -50/60 Hz
Yes
LED Display
234 x 132 x 60mm
9.2 x 5.2 x 2.4''
1.8kg (4lbs)
See opposite page >>>
------------------------- IUoUo, automatic / 3-step + for gel/AGM/wet/Lithium Ion ----------------------------14.25V (6 hours)
14.25V (6 hours)
14.4V (8 hours)
14.25V (6 hours)
14.25V (6 hours)
14.25V (4 hours)
13.25V
13.25V
13.25V
13.8V
13.8V
13.8V
-30 mV/ºC
-30 mV/ºC
-30 mV/ºC
Automatic
Automatic
Automatic
< 1mA
< 1mA
< 2mA
170W
250W
450W
> 0.95
> 0.95
≥ 0.98
-25ºC to 60ºC, > 40ºC derating power
-25ºC to 60ºC, > 25ºC derating power
Natural Cooling
--- Maintenance Vario fan to ensure optimised cooling --< 30 dBA at 1m
< 52 dBA at 1m
< 52 dBA at 1m
IP65
IP21
IP23
Over temperature, over load, short circuit, high battery, low battery
n/a
n/a
Yes
No
No
Yes, using Multipurpose Contact Output
(Part No. M77030500)
CONTROL PANELS / ACCESSORIES See pages 27 - 28 for further information on Operating, Monitoring & Control
OPTIONS
MasterView Read-out (Part. no M77010050)
MasterView Easy (Part No. M77010305)
MasterShunt
(Part No. M77020100)
MasterBus USB Interface
(Part No. M77030100)
Multipurpose Contact Output
(Part No. M77030500)
Panels and pages 23 - 26 for MasterBus system
n/a
n/a
n/a
n/a
n/a
n/a
See opposite page >>>
See opposite page >>>
See opposite page >>>
n/a
n/a
See opposite page >>>
n/a
n/a
See opposite page >>>
* At request also available with 90-400 V DC input voltage. ** The charge characteristic can be set to your requirements.
*** The battery charge current can sometimes be specified at 20 °C, so take temperature compensation into account.
2
MASTERVOLT
Mastervolt ChargeMaster
Battery Chargers 12V
CHARGEMASTER BATTERY CHARGERS
M44010350
M44010500
M44010700
M44011000
12/35-3
12/50-3
12/70-3*
12/100-3*
12V
12V
12V
12V
35A at 14.4V
50A at 14.4V
70A at 14.4V
100A at 14.4V
3
3
3
3
35A
50A
10A
10A
35A
50A
10A
10A
70-350Ah
100-500Ah
140-700Ah
200-1000Ah
---------------------------------------------------------------------------- 120/230V (90-265V) -50/60 Hz --------------------------------------------------------------------------------Yes
Yes
Yes
Yes
LED Display
LED Display
LCD Display
LCD Display
291 x 210 x 131mm
291 x 210 x 131mm
362 x 277 x 150mm
362 x 277 x 150mm
11.5 x 8.3 x 5.2''
11.5 x 8.3 x 5.2''
14.3 x 11 x 5.9''
14.3 x 11 x 5.9''
4kg (9lbs)
4kg (9lbs)
7kg (16lbs)
7kg (16lbs)
------------------------------------------------------ CE, E-mark, ABYC A-31, SAE J1171/ISO 8846 ignition protected -----------------------------------------------------------
M77030500
M77030100
M77020100
M77010305
M77010050
------------------------------------------------------------- IUoUo, automatic / 3-step + for gel/AGM/wet/Lithium Ion---------------------------------------------------------------14.4V (8 hours)
14.4V (8 hours)
14.4V (8 hours)
14.4V (8 hours)
14.25V (4 hours)
14.25V (4 hours)
14.25V (4 hours)
14.25V (4 hours)
13.25V
13.25V
13.25V
13.25V
13.8V
13.8V
13.8V
13.8V
-30 mV/ºC
-30 mV/ºC
-30 mV/ºC
-30 mV/ºC
Automatic
Automatic
Automatic
Automatic
< 5mA
< 5mA
< 5mA
< 5mA
575W
825W
1200W
1700W
≥ 0.98
≥ 0.98
≥ 0.98
≥ 0.98
-------------------------------------------------------------------- -25ºC to 60ºC, > 40ºC derating power ------------------------------------------------------------------------------------------------------------------------------------------- Maintenance Vario fan to ensure optimised cooling ----------------------------------------------------------------------< 52 dBA at 1m
< 52 dBA at 1m
< 52 dBA at 1m
< 52 dBA at 1m
IP23
IP23
IP23
IP23
----------------------------------------------------- Over temperature, over load, short circuit, high battery, low battery --------------------------------------------------------Yes
Yes
Yes
Yes
-------------------------------------------------------- Yes, using Multipurpose Contact Output (Part No. M77030500) -----------------------------------------------------------
-------------------------------- Remote panel for reading the charge status of your battery charger, including error notifications (page 22) ------------------------------------------------------------------------Touch screen panel for reading charge status, current fold-back and/or Power Sharing setting (page 22) ------------------------------------------------------------------- MasterBus integrated shunt, with detailed information on the status of your batteries for a optimised charging process,-----------------------------incl. voltage, current, remaining time and consumption capacity in percentage (page 23)
------------- Communication port between MasterBus and the USB port of your PC; makes possible reading and configuration of your MasterBus system ----------on the PC when combined with MasterView System software (free to download) (page 24).
------------------------------- MasterBus controllable potential-free contact, with alarm notification on the onboard system (low voltage or no AC), -------------------------replacement of the CSI alarm contact (page 26).
All Mastervolt battery chargers can be
connected to a MasterBus network with
only one cable and one connection.
MASTERVOLT
3
Mastervolt ChargeMaster
Battery Chargers 24V
CHARGEMASTER BATTERY CHARGERS
CHARGEMASTER BATTERY CHARGERS - 24V
The ChargeMaster is suitable for recreational and
semi-professional use. Easy to install, it includes a
detailed display and easy three-button controls.
The ChargeMaster safely charges multiple battery
banks at the same time.
3STEP + charging memory ensures more power
and a longer life for your batteries.
Part No.
GENERAL SPECIFICATIONS
Model:
Nominal Output Voltage:
Total Charge Current:
No. of Battery Outlets:
Charge Current Second Output:
Charge Current Third Output:
Recommended Battery Capacity:
Nominal Input Voltage:
Supplies Your System Without Battery:
Display/read-out:
Dimensions (H x W x D in mm):
Dimensions (H x W x D in inch):
Weight:
Approvals:
TECHNICAL SPECIFICATIONS
Charge Characteristic** :
Charge Voltage Bulk (25ºC)***:
Charge Voltage Absorption (25ºC)***:
Charge Voltage Float - wet (25ºC)***:
Laadspanning Float - Gel/AGM (25ºC)***:
Temperature Compensation:
Voltage Compensation:
DC Consumption:
Full Load Consumption (230V AC):
Cos Phi:
Temperature Range (ambient temp.):
Cooling:
Sound Level:
Protection Degree:
Protections:
MasterBus Compatible:
CSI/DC Alarm:
M43020600
24/6
24V
6A at 28.5V
1
n/a
n/a
25 - 70Ah
230V (180-265V) -50/60 Hz
No
1 LED
180 x 121 x 50mm
7.1 x 4.8 x 2''
1kg (2.2lbs)
CE, E-mark, ABYC A-31
M44020120
M44020200
24/12-3
24/20-3
24V
24V
12A at 26.5V
20A at 28.8V
3
3
12A
20A
12A
20A
24 - 120Ah
40 - 200Ah
----------------------- 120/230V (90-265V) -50/60 Hz --------------------------Yes
Yes
LED Display
LED Display
234 x 132 x 60mm
291 x 210 x 131mm
9.2 x 5.2 x 2.4''
11.5 x 8.3 x 5.2''
1.8kg (4lbs)
4kg (9lbs)
CE, E-mark, ABYC A-31, SAE J1171/ISO 8846 ignition protected
------------------------------- IUoUo, automatic / 3-step + for gel/AGM/wet/Lithium Ion ---------------------------------28.5V (6 hours)
28.8V (8 hours)
28.8V (8 hours)
28.5V (6 hours)
28.5V (4 hours)
28.5V (4 hours)
26.5V
26.5V
26.5V
27.6V
27.6V
27.6V
-60 mV/ºC
-60 mV/ºC
-60 mV/ºC
Automatic
Automatic
Automatic
< 1mA
< 2mA
< 2.5mA
210W
435W
660W
> 0.95
≥ 0.98
≥ 0.98
-25ºC to 60ºC, > 40ºC derating power -25ºC to 60ºC, > 25ºC derating power -25ºC to 60ºC, > 40ºC derating power
Natural Cooling
---------------- Maintenance free vario fan for optimal cooling -------------< 30 dBA at 1m
< 52 dBA at 1m
< 52 dBA at 1m
IP65
IP23
IP23
----------------------- Over temperature, over load, short circuit, high battery, low battery --------------------------n/a
Yes
Yes
No
Yes, using Multipurpose Contact Output (Part No. M77030500)
CONTROL PANELS / ACCESSORIES
OPTIONS
MasterView Read-out (Part. no M77010050) n/a
MasterView Easy (Part No. M77010305) n/a
MasterShunt
n/a
(Part No. M77020100)
MasterBus USB Interface
n/a
(Part No. M77030100)
Multipurpose Contact Output
n/a
(Part No. M77030500)
See pages 27 - 28 for further information on Operating, Monitoring & Control
Panels and pages 23 - 26 for MasterBus system
See opposite page >>>
See opposite page >>>
See opposite page >>>
See opposite page >>>
See opposite page >>>
See opposite page >>>
See opposite page >>>
See opposite page >>>
See opposite page >>>
See opposite page >>>
* At request also available with 90-400 V DC input voltage. ** The charge characteristic can be set to your requirements.
*** The battery charge current can sometimes be specified at 20 °C, so take temperature compensation into account.
4
MASTERVOLT
Mastervolt ChargeMaster
Battery Chargers 24V
CHARGEMASTER BATTERY CHARGERS
M44020300
M44020400
M44020600
M44020800
M44021000
24/30-3
24/40-3*
24/60-3*
24/80-3*
24/100-3*
24V
24V
24V
24V
24V
30A at 28.8V
40A at 28.8V
60A at 28.8V
80A at 28.8V
100A at 28.8V
3
3
3
3
3
30A
10A
10A
10A
10A
30A
10A
10A
10A
10A
60-300Ah
80-400Ah
120-600Ah
160-800Ah
200-1000Ah
---------------------------------------------------------------------------- 120/230V (90-265V) -50/60 Hz --------------------------------------------------------------------------------Yes
Yes
Yes
Yes
Yes
LED Display
LCD Display
LCD Display
LCD Display
LCD Display
291 x 210 x 131mm
362 x 277 x 150mm
362 x 277 x 150mm
432 x 277 x 150mm
432 x 277 x 150mm
11.5 x 8.3 x 5.2''
14.3 x 11 x 5.9''
14.3 x 11 x 5.9''
17 x 11 x 5.9''
17 x 11 x 5.9''
4kg (9lbs)
7kg (16lbs)
7kg (16lbs)
8kg (18lbs)
8kg (18lbs)
------------------------------------------------------ CE, E-mark, ABYC A-31, SAE J1171/ISO 8846 ignition protected -----------------------------------------------------------
M77030500
M77030100
M77020100
M77010305
M77010050
------------------------------------------------------------- IUoUo, automatic / 3-step + for gel/AGM/wet/Lithium Ion---------------------------------------------------------------28.8V (8 hours)
28.8V (8 hours)
28.8V (8 hours)
28.8V (8 hours)
28.8V (8 hours)
28.5V (4 hours)
28.5V (4 hours)
28.5V (4 hours)
28.5V (4 hours)
28.5V (4 hours)
26.5V
26.5V
26.5V
26.5V
26.5V
27.6V
27.6V
27.6V
27.6V
27.6V
-60 mV/ºC
-60 mV/ºC
-60 mV/ºC
-60 mV/ºC
-60 mV/ºC
Automatic
Automatic
Automatic
Automatic
Automatic
< 2.5mA
< 5mA
< 5mA
< 5mA
< 5mA
925W
1400W
2000W
2700W
3375W
≥ 0.98
≥ 0.98
≥ 0.98
≥ 0.98
≥ 0.98
----------------------------------------------------------------------- -25ºC to 60ºC, > 40ºC derating power -------------------------------------------------------------------------------------------------------------------------------------------- Maintenance free vario fan for optimal cooling -------------------------------------------------------------------------< 52 dBA at 1m
< 52 dBA at 1m
< 52 dBA at 1m
< 52 dBA at 1m
< 52 dBA at 1m
IP23
IP23
IP23
IP23
IP23
----------------------------------------------------- Over temperature, over load, short circuit, high battery, low battery ---------------------------------------------------------Yes
Yes
Yes
Yes
Yes
-------------------------------------------------------- Yes, using Multipurpose Contact Output (Part No. M77030500) -----------------------------------------------------------
-------------------------------- Remote panel for reading the charge status of your battery charger, including error notifications (page 22) ------------------------------------------------------------------------Touch screen panel for reading charge status, current fold-back and/or Power Sharing setting (page 22) ------------------------------------------------------------------- MasterBus integrated shunt, with detailed information on the status of your batteries for a optimised charging process,-----------------------------incl. voltage, current, remaining time and consumption capacity in percentage (page 23)
------------- Communication port between MasterBus and the USB port of your PC; makes possible reading and configuration of your MasterBus system ----------on the PC when combined with MasterView System software (free to download) (page 24).
------------------------------- MasterBus controllable potential-free contact, with alarm notification on the onboard system (low voltage or no AC), -------------------------replacement of the CSI alarm contact (page 26).
All Mastervolt battery chargers can be
connected to a MasterBus network with
only one cable and one connection.
MASTERVOLT
5
Mastervolt Mass
Battery Chargers
MASS BATTERY CHARGERS
MASS BATTERY CHARGERS
Mass battery chargers are designed for the tougher
tasks in professional and semi-professional situations.
They have one main outlet to optimally charge a
battery bank and guarantee a long lifespan for your
batteries even with daily and intensive use. The
second outlet is used for the maintenance charge of
your starter battery.
3STEP + charging memory ensures more power
and a longer life for your batteries.
Part No.
GENERAL SPECIFICATIONS
Model:
Nominal Output Voltage:
Total Charge Current:
No. of Battery Outlets:
Charge Current Second Output:
Recommended Battery Capacity:
Nominal Input Voltage:
Supplies Your System Without Battery:
Display/read-out:
Dimensions (H x W x D in mm):
Dimensions (H x W x D in inch):
Weight:
Approvals**:
TECHNICAL SPECIFICATIONS
Charge Characteristic*** :
Charge Voltage Bulk (25ºC)****:
Charge Voltage Absorption (25ºC)****:
Charge Voltage Float - wet (25ºC)****:
Laadspanning Float - Gel/AGM (25ºC)****:
Temperature Compensation:
Voltage Compensation:
DC Consumption:
Full Load Consumption (230V AC):
Cos Phi:
Temperature Range (ambient temp.):
Cooling:
Sound Level:
Protection Degree:
Protections:
MasterBus Compatible:
CSI/DC Alarm:
GMDSS Function:
M40010606
M40010806
M40020156
M40020256
12/60-2
12/80-2
24/15-2
24/25-2
12V
12V
24V
24V
60A at 14.25V
80A at 14.25V
15A at 28.5V
25A at 28.5V
2
2
2
2
3A
3A
3A
3A
120 - 600Ah
160 - 800Ah
30 - 150Ah
50 - 250Ah
------------------------------------- 230V (180-265V) - 50/60Hz -----------------------------------------------Yes
Yes
Yes
Yes
LED Display
LED Display
LED Display
LED Display
340 x 261 x 130mm
340 x 261 x 130mm
325 x 220 x 111mm
325 x 220 x 111mm
13.4 x 10.3 x 5.1''
13.4 x 10.3 x 5.1''
12.8 x 8.7 x 4.4''
12.8 x 8.7 x 4.4''
4.6kg / 10.1lbs
4.6kg / 10.1lbs
3.3kg / 7.3lbs
3.3kg / 7.3lbs
---- CE, E-Mark, ABYC A-31/RRR, RS, DNV, Lloyds, Bureau Veritas, Germanischer Lloyds ------------------------- IUoUo, automatic / 3-step + for gel/AGM/wet/Lithium Ion ------------------------14.25V (8 hours)
14.25V (8 hours)
28.5V (8 hours)
28.5V (8 hours)
14.25V (4 hours)
14.25V (4 hours)
28.5V (4 hours)
28.5V (4 hours)
13.25V
13.25V
26.5V
26.5V
13.8V
13.8V
27.6V
27.6V
-30 mV/ºC
-30 mV/ºC
-60 mV/ºC
-60 mV/ºC
-------------------------- Voltage drop compensation in DC cables up to 3 Volt -------------------------< 1mA
< 1mA
< 1mA
< 1mA
1100W
1400W
550W
880W
> 0.95
> 0.95
> 0.95
> 0.95
------------------------------------- -25ºC to 80ºC, > 45ºC derating power ----------------------------------vario fan
vario fan
vario fan
vario fan
< 48dBA at 1m
< 48dBA at 1m
< 48dBA at 1m
< 48dBA at 1m
IP23
IP23
IP23
IP23
--------------------- over temperature, over load, short circuit, high battery, low battery -------------Yes
Yes
Yes
Yes
----------------------------- Integrated in the battery charger as standard ----------------------------------------------------------------------- GMDSS panel is available for all models ---------------------------------------
CONTROL PANELS / ACCESSORIES See pages 27 - 28 for further information on Operating, Monitoring & Control
Panels and pages 23 - 26 for MasterBus system
OPTIONS
MasterView Read-out (Part. no M77010050)
MasterView Easy (Part No. M77010305)
MasterShunt
(Part No. M77020100)
MasterBus USB Interface
(Part No. M77030100)
MasterVision Panels
Remote panel for reading the charge status of your battery charger, including error notifications (p 22)
Touch screen panel for reading charge status, current fold-back and/or Power Sharing setting (p 22)
MasterBus integrated shunt, with detailed information on the status of your batteries for a optimised
charging process incl. voltage, current, remaining time and consumption capacity in percentage (p 23)
Communication port between MasterBus & the USB port of your PC; makes possible reading & configuration
of your MasterBus system on the PC when combined with MasterView System software (p 24)
Model C3-RS
Masterlink MICC
Part No. M70403040
Part No. M70403105
* Available as option: second output 3 A (art. no. 21711000. ** Check Mastervolt website for certificates. *** The charge characteristic can be set to your requirements.
**** The battery charge current can sometimes be specified at 20 °C, so take temperature compensation into account.
6
MASTERVOLT
Mastervolt Mass
Battery Chargers
MASS BATTERY CHARGERS
M40020506
M40020756
M40021006
M40031006
M40040256
M40040506
24/50-2
24/75-C
24/100-C
24/100-3ph
48/25
48/50
24V
24V
24V
24V
48V
48V
50A at 28.5V
75A at 28.5V
100A at 28.5V
100A at 28.5V
25A at 57V
50A at 57V
2
1
1
1
1
1
3A
n/a*
n/a*
n/a*
n/a
n/a
100 - 500Ah
150 - 750Ah
200 - 1000Ah
200 - 1000Ah
100 - 500Ah
100 - 500Ah
----------------------- 230V (180-265V) - 50/60Hz -----------------------3 x 400V (360-485V)
---------- 230V (180-250V) - 50/60Hz -----------Yes
Yes
Yes
Yes
Yes
Yes
LED Display
LED Display
LED Display
LED Display
LED Display
LED Display
340 x 261 x 130mm
420 x 318 x 130mm
420 x 318 x 130mm
420 x 318 x 130mm
420 x 318 x 130mm
420 x 318 x 130mm
13.4 x 10.3 x 5.1''
16.5 x 12.5 x 5.1''
16.5 x 12.5 x 5.1''
16.5 x 12.5 x 5.1''
16.5 x 12.5 x 5.1''
16.5 x 12.5 x 5.1''
4.6kg / 10.1lbs
7.7kg / 17lbs
7.7kg / 17lbs
7.7kg / 17lbs
4.6kg / 10.1lbs
7.7kg / 17lbs
----------------------------------- CE, E-Mark, ABYC A-31/RRR, RS, DNV, Lloyds, Bureau Veritas, Germanischer Lloyds -------------------------------------------------
M77030100
M77020100
M77010305
M77010050
----------------------------------------------------------- IUoUo, automatic / 3-step + for gel/AGM/wet/Lithium Ion ----------------------------------------------------------------28.5V (8 hours)
28.5V (8 hours)
28.5V (8 hours)
28.5V (8 hours)
57V (8 hours)
57V (8 hours)
28.5V (4 hours)
28.5V (4 hours)
28.5V (4 hours)
28.5V (4 hours)
57V (4 hours)
57V (4 hours)
26.5V
26.5V
26.5V
26.5V
53V
53V
27.6V
27.6V
27.6V
27.6V
55.2V
55.2V
-60 mV/ºC
-60 mV/ºC
-60 mV/ºC
-60 mV/ºC
-120 mV/ºC
-120 mV/ºC
------------------------------------------------------------------ Voltage drop compensation in DC cables up to 3 Volt ----------------------------------------------------------------------------< 1mA
< 1mA
< 1mA
< 1mA
< 1mA
< 1mA
1800W
2600W
3500W
3500W
1800W
3500W
> 0.95
> 0.95
> 0.95
> 0.95
> 0.95
> 0.95
--------------------------------------------------------------------- -25ºC to 80ºC, > 45ºC derating power ------------------------------------------------------------------------------vario fan
vario fan
vario fan
vario fan
vario fan
vario fan
< 48dBA at 1m
< 48dBA at 1m
< 48dBA at 1m
< 48dBA at 1m
< 48dBA at 1m
< 48dBA at 1m
IP23
IP23
IP23
IP23
IP23
IP23
-------------------------------------------------- Over temperature, over load, short circuit, high battery, low battery -----------------------------------------------------------Yes
Yes
Yes
Yes
Yes
Yes
--------------------------------------------------------------- Integrated in the battery charger as standard ----------------------------------------------------------------------------------------------------------------------------------------------------- GMDSS panel is available for all models -------------------------------------------------------------------------------------
-------------------------------- Remote panel for reading the charge status of your battery charger, including error notifications (page 22) ------------------------------------------------------------------------Touch screen panel for reading charge status, current fold-back and/or Power Sharing setting (page 22) ------------------------------------------------------------------- MasterBus integrated shunt, with detailed information on the status of your batteries for a optimised charging process,-----------------------------incl. voltage, current, remaining time and consumption capacity in percentage (page 23)
------------- Communication port between MasterBus and the USB port of your PC; makes possible reading and configuration of your MasterBus system ----------on the PC when combined with MasterView System software (free to download) (page 24).
See page 28 for MasterVision panels. QRS232 communication connection for all models
PART NO.S IN RED = TO ORDER ONLY
All Mastervolt battery chargers can be
connected to a MasterBus network with
only one cable and one connection.
MASTERVOLT
7
Mastervolt AC Master
Sine Wave Inverters
AC MASTER SINE WAVE INVERTERS
AC MASTER SINE WAVE INVERTERS
Suitable for small and medium sized vessels.
An on-board AC installation allows you to use any
domestic appliance, from microwave oven to
hairdryer, from DVD player to power tools.
A Mastervolt inverter allows you to easily
transform the voltage of your 12 or 24V battery to
230V/50Hz so you enjoy all the comforts of home
wherever you choose to cruise.
The AC Master inverters are small, lightweight
and silent with easy installation and operation.
Part No.
GENERAL SPECIFICATIONS
Model:
Nominal Battery Voltage:
Recommended Battery Capacity:
Output Voltage (±5%):
Continuous power at 25ºC, cos phi I:
Continuous power at 40ºC, cos phi I:
Peak Load:
Output Waveform:
Efficiency:
Display/read-out:
Dimensions (H x W x D in mm):
Dimensions (H x W x D in inch):
Weight:
Approvals:
TECHNICAL SPECIFICATIONS
Technology:
Low Battery Voltage, switches off at:
Low Battery Voltage, switches on at:
High Battery Voltage, switches off at:
High Battery Voltage, switches on at:
Max ripple on DC (battery):
Input Current (Nominal Load):
No Load Power Consumption:
‘On’ mode (230V)
Standby (scan mode)
Minimal DC Fuse (slow blow)**:
Minimal Cable Size:
Harmonic Distortion Typical:
Cos Phi:
Temperature Range (ambient temp.):
Cooling:
Sound Level:
Protection Degree:
Protections:
MasterBus Compatible:
AC Connection:
M28010300
12/300
12V
≥ 60Ah
230V - 50Hz (±0.1%)
300W
250W
600W
True Sine
90%
LED Display
210 x 130 x 60mm
8.3 x 5.1 x 2.4''
1.16kg (2.55lbs)
CE, E-mark, ABYC A-31
M28010500
12/500
12V
≥ 100Ah
230V - 50Hz (±0.1%)
500W
400W
800W
True Sine
90%
LED Display
210 x 130 x 60mm
8.3 x 5.1 x 2.4''
1.22kg (2.69lbs)
CE, E-mark, ABYC A-31
M27510700
12/700*
12V
≥ 150Ah
230V - 50Hz (±0.1%)
750W
600W
1200W
True Sine
90%
LED Display
275 x 155 x 75mm
10.8 x 6.1 x 3''
2.7kg (5.4lbs)
CE, E-mark, ABYC A-31
HF switch mode
10V, ± 0.5V
11V, ± 0.5V
16V, ± 0.5V
14.5V, ± 0.5V
10% RMS
22.5A
HF switch mode
10V, ± 0.5V
11V, ± 0.5V
16V, ± 0.5V
14.5V, ± 0.5V
10% RMS
37.5A
HF switch mode
10V, ± 0.5V
12V, ± 0.5V
15.3V, ± 0.5V
14.2V, ± 0.5V
5% RMS
64A
0.58A - 7W
0.58A - 7W
0.75A - 9W
0.33A - 4W
0.33A - 4W
0.37A - 4.5W
40A
80A
100A
Included
Included
25mm2
< 6%
< 6%
< 3%
------------------------------------------ All power factors allowed ----------------------------------------------------------------------------------- -25ºC to 60ºC, > 25ºC derating power ----------------------------------------------Natural/forced
Natural/forced
Natural/forced
53 dBA at 1m
53 dBA at 1m
53 dBA at 1m
IP23
IP23
IP23
----------------------- Over temperature, over load, short circuit, high battery, low battery -------------------------No
No
No
Universal
Universal
Fixed connection
* The AC Master 750 will be available in 2011, intil that date a 700W version is available.
** DC Fuse depends on the cable size
8
MASTERVOLT
Mastervolt AC Master
Sine Wave Inverters
AC MASTER SINE WAVE INVERTERS
M28020300
24/300
24V
≥ 30Ah
230V - 50Hz (±0.1%)
300W
250W
600W
True Sine
91%
LED Display
210 x 130 x 60mm
8.3 x 5.1 x 2.4''
1.16kg (2.55lbs)
CE, E-mark, ABYC A-31
M28020500
24/500
24V
≥ 50Ah
230V - 50Hz (±0.1%)
500W
400W
800W
True Sine
91%
LED Display
210 x 130 x 60mm
8.3 x 5.1 x 2.4''
1.22kg (2.69lbs)
CE, E-mark, ABYC A-31
M27520700
24/700*
24V
≥ 75Ah
230V - 50Hz (±0.1%)
750W
600W
1200W
True Sine
90%
LED Display
275 x 155 x 75mm
10.8 x 6.1 x 3''
2.7kg (5.4lbs)
CE, E-mark, ABYC A-31
HF switch mode
20V, ± 0.5V
22V, ± 0.5V
32V, ± 0.5V
29V, ± 0.5V
10% RMS
11A
HF switch mode
20V, ± 0.5V
22V, ± 0.5V
32V, ± 0.5V
29V, ± 0.5V
10% RMS
19A
HF switch mode
21V, ± 0.5V
25V, ± 0.5V
30.6V, ± 0.5V
28.4V, ± 0.5V
5% RMS
32A
0.29A - 7W
0.29A - 7W
0.38A - 9W
0.16A - 4W
0.16A - 4W
0.19A - 4.5W
20A
40A
50A
Included
Included
10mm2
< 6%
< 6%
< 3%
-------------------------------------------------------------------------------- All power factors allowed ---------------------------------------------------------------------------------------------------------------------------------------------------------- -25ºC to 60ºC, > 25ºC derating power -----------------------------------------------------------------------------Natural/forced
Natural/forced
Natural/forced
53 dBA at 1m
53 dBA at 1m
53 dBA at 1m
IP23
IP23
IP23
---------------------------------------------------------- Over temperature, over load, short circuit, high battery, low battery ------------------------------------------------------------------No
No
No
Universal
Universal
Fixed connection
MASTERVOLT
9
Mastervolt Mass Sine
Sine Wave Inverters
MASS SINE SINE WAVE INVERTERS
MASS SINE SINE WAVE INVERTERS
Suitable for larger systems on superyachts and for
(semi)-professional purposes.
An on-board AC installation allows you to use any domestic
appliance, from microwave oven to hairdryer, from DVD player
to power tools.
A Mastervolt inverter allows you to easily transform the voltage
of your 12 or 24V battery to 230V/50Hz so you enjoy all the
comforts of home wherever you choose to cruise.
They have proven themselves in the most extreme conditions
for over 10 years and continue to evolve.
Part No.
GENERAL SPECIFICATIONS
Model:
Nominal Battery Voltage:
Minimum Battery Capacity:
Output Voltage (±5%):
P30 power at 40ºC, cos phi I:
Continuous power at 40ºC, cos phi I:
Peak Load:
Output Waveform:
Efficiency:
Display/read-out:
Dimensions (H x W x D in mm):
Dimensions (H x W x D in inch):
Weight:
Approvals:
TECHNICAL SPECIFICATIONS
Technology:
Low Battery Voltage, switches off at:
Low Battery Voltage, switches on at:
High Battery Voltage, switches off at:
High Battery Voltage, switches on at:
Max ripple on DC (battery):
Input Current (Nominal Load):
No Load Power Consumption:
‘On’ mode (230V)
Standby (scan mode)
Minimal DC Fuse (slow blow)*:
Minimal Cable Size:
Harmonic Distortion Typical:
Cos Phi:
Temperature Range (ambient temp.):
Cooling:
Sound Level:
Protection Degree:
Protections:
MasterBus Compatible:
AC Connection:
M24010800
12/800
12V
> 100Ah
230V - 50Hz (±0.01Hz)
800W
650W
1600W
True Sine
92%
LED Display
325 x 220 x 111
12.8 x 8.7 x 4.4
3.9kg (8.6lbs)
CE, E-mark, ABYC A-31
M24011200
12/1200
12V
> 150Ah
230V - 50Hz (±0.01Hz)
1200W
1000W
2400W
True Sine
92%
LED Display
340 x 261 x 130
13.4 x 10.3 x 5.1
8kg (17.4lbs)
CE, E-mark, ABYC A-31
M24012000
12/2000
12V
> 200Ah
230V - 50Hz (±0.01Hz)
2000W
1800W
4000W
True Sine
92%
LED Display
420 x 318 x 136
16.5 x 12.5 x 5.4
14.6kg (32.2lbs)
CE, E-mark, ABYC A-31
HF switch mode
10V, ± 0.5V
11V, ± 0.5V
15.5V, ± 0.5V
14.5V, ± 0.5V
5% RMS
73A
HF switch mode
10V, ± 0.5V
11V, ± 0.5V
15.5V, ± 0.5V
14.5V, ± 0.5V
5% RMS
110A
HF switch mode
10V, ± 0.5V
11V, ± 0.5V
15.5V, ± 0.5V
14.5V, ± 0.5V
5% RMS
183A
470mA - 5.6W
450mA - 5W
480mA - 6W
65mA - 0.8W
43mA - 0.5W
50mA - 0.6W
100A
150A
250A
25mm2
50mm2
70mm2
< 5%
< 5%
< 5%
------------------------------------------ All power factors allowed ----------------------------------------------------------------------------------- -25ºC to 80ºC, > 40ºC derating power ----------------------------------------------Natural/forced
Natural/forced
Natural/forced
48 dBA at 1m
48 dBA at 1m
48 dBA at 1m
IP23
IP23
IP23
----------------------- Over temperature, over load, short circuit, high battery, low battery -------------------------------------------------- Yes, using a MasterBus inverter interface or AC power analyser --------------------------Internal
Internal
Internal
CONTROL PANELS / ACCESSORIES See pages 27 - 28 for further information on Operating, Monitoring & Control
OPTIONS
Model C4-RI (Part. no M70404110)
Masterlink/MICC (Part No. M70403105)
Panels and pages 23 - 26 for MasterBus system
------------------------- Remote control on/off for the Mass Sine sine wave inverter ------------------------------------------------ Battery consumption meter for 2 batteries, 12/24V DC with LCD read-out, ---------------------------------- remote control for Mass Sine Inverter and Mass Battery Charger or Mass Combi ----------------MasterBus Inverter Interface (Part No. M77030700) --------------------- Integrates the Mass Sine inverter in a MasterBus network (page 24) ------------------------AC Power Analyser
--------- Integrates the Mass Sine Inverter in a MasterBus network and visualizes the AC voltage, --------(Part No. M77031200)
------------------------------------------- current and power (page 25) -------------------------------------------------------Transfer System
------------------- The Masterswitch and Systemswitch can be connected to all inverters -----------------------* DC Fuse depends on the cable size
10
MASTERVOLT
Mastervolt Mass Sine
Sine Wave Inverters
MASS SINE SINE WAVE INVERTERS
M24026000
M24027000
Part No.s in red =
To Order Only
M24020800
M24021500
M24022500
M24095100
M24026000
M24027000
24/800
24/1500
24/2500
24/5000
24/10kVA
24/15kVA
24V
24V
24V
24V
24V
24V
> 50Ah
> 150Ah
> 200Ah
> 400Ah
> 500Ah
> 800Ah
---------------------------------------------------------------------------- 230V - 50Hz (±0.01Hz) -------------------------------------------------------------------------------------------800W
1500W
2500W
5000W
10kW
15kW
650W
1200W
2000W
4000W
8kW
13kW
1600W
2900W
5000W
9000W
20kW
30kW
True Sine
True Sine
True Sine
True Sine
True Sine
True Sine
92%
92%
92%
92%
92%
92%
LED Display
LED Display
LED Display
LED Display
LED Display
LED Display
325 x 220 x 111
340 x 261 x 130
420 x 318 x 130
470 x 315 x 254
2x 460.5 x 318 x 143+
3x 460.5 x 318 x 143+
12.8 x 8.7 x 4.4
13.4 x 10.3 x 5.1
16.5 x 12.5 x 5.1
18.5 x 12.4 x 10
475.5 x 318 x 254mm
475.5 x 318 x 254mm
3.9kg (8.6lbs)
8kg (17.4lbs)
14.6kg (32.2lbs)
25kg (55.1lbs)
44kg (97lbs)
55kg (121.3lbs)
--------------------------------------------------------------------------- CE, E-mark, ABYC A-31 ------------------------------------------------------------------------------------------TECHNICAL SPECIFICATIONS
HF switch mode
HF switch mode
HF switch mode
HF switch mode
HF switch mode
HF switch mode
19V, ± 0.5V
19V, ± 0.5V
19V, ± 0.5V
19V, ± 0.5V
19V, ± 0.5V
19V, ± 0.5V
22V, ± 0.5V
22V, ± 0.5V
22V, ± 0.5V
22V, ± 0.5V
22V, ± 0.5V
22V, ± 0.5V
32V, ± 0.5V
32V, ± 0.5V
33V, ± 0.5V
32V, ± 0.5V
32V, ± 0.5V
32V, ± 0.5V
30V, ± 0.5V
30V, ± 0.5V
31V, ± 0.5V
30V, ± 0.5V
31V, ± 0.5V
31V, ± 0.5V
5% RMS
5% RMS
5% RMS
5% RMS
5% RMS
5% RMS
36A
68A
115A
230A
4 x 120A
6 x 120A
M77031200
M77030700
M70403105
M70404110
240mA - 5.6W
200mA - 5W
250mA - 6W
250mA - 6W
180W
180W
35mA - 0.8W
25mA - 0.6W
25mA - 0.6W
n/a
< 10W, 412mA
< 10W, 412mA
63A
100A
160A
1 x 250A or 2 x 125A
4 x 160A
6 x 160A
16mm2
25mm2
50mm2
2 x 70mm2
4 x 50mm2
6 x 50mm2
< 5%
< 5%
< 5%
< 5%
< 2.5%
< 2.5%
------------------------------------------------------------------------------- All power factors allowed ------------------------------------------------------------------------------------------------------------------------------------------------------------- -25ºC to 80ºC, > 40ºC derating power -----------------------------------------------------------------------------Natural/forced
Natural/forced
Natural/forced
Natural/forced
Natural/forced
Natural/forced
48 dBA at 1m
48 dBA at 1m
48 dBA at 1m
48 dBA at 1m
48 dBA at 1m
48 dBA at 1m
IP23
IP23
IP23
IP23
IP23
IP23
--------------------------------------------------- Over temperature, over load, short circuit, high battery, low battery ----------------------------------------------------------------------------------------------------------------------------- Yes, using a MasterBus inverter interface or AC power analyser ---------------------------------------------------------------------------Internal
Internal
Internal
Internal
Internal
Internal
---------------------------------------------------------- Remote control on/off for the Mass Sine sine wave inverter ------------------------------------------------------------------------------- Battery consumption meter for 2 batteries, 12/24V DC with LCD read-out, remote control for Mass Sine Inverter and Mass Battery Charger or Mass Combi ------------------------------------------------------- Integrates the Mass Sine inverter in a MasterBus network (page 24) ------------------------------------------------------------------------------------------ Integrates the Mass Sine Inverter in a MasterBus network and visualizes the AC voltage, current and power (page 25) --------------------------------------------------------------------------------- The Masterswitch and Systemswitch can be connected to all inverters ----------------------------------------------------------------------
All Mastervolt Mass Sine sine wave inverters
can be connected to a MasterBus network
with only one cable and one connection.
MASTERVOLT
11
Mastervolt Mass Combi
Inverter Chargers
MASS COMBI
MASS COMBI INVERTER CHARGERS
Ideal for most vessels from launches to 16m yachts.
The two 48V models are ideal for electric sailing.
• Power boost from battery when shore power is
limited (shore/generator support)
• Charging two individual battery terminals
• Invert to 230 V/50 Hz pure sine wave voltage
• Supplies 12, 24 or 48 Volt onboard power
• Multiple distribution and switching systems
• Two Combis parallel switched for more power
• Meets the ABYC A-31 guideline
Part No.
SINE WAVE INVERTER SPECIFICATIONS
Model:
Nominal DC Voltage:
Continuous Power at 25ºC, cos phi I:
Surge Capability (5 sec. resistive):
Parallel Use (to double the power):
Parallel with Shore/Generator (for more power):
Output Voltage (± 5%):
Output Waveform:
Efficiency:
DC Consumption at 230V:
Search Mode Consumption:
GENERAL SPECIFICATIONS BATTERY CHARGER
Nominal Input Voltage:
Max. Charge Current (adjustable):
Primary AC Consumption (full charge):
Charge Voltage 25ºC (absorption/float):*
Charge Characteristic:
Second Charge Output, 3-Step:
Temperature Sensor for the Battery:
GENERAL SPECIFICATIONS
Display / Read-out:
Dimensions (H x W x D in mm):
Dimensions (H x W x D in inch):
Weight:
Approvals:
TECHNICAL SPECIFICATIONS
Max. Current First Output:
Max. Current Shortbreak / Inverter Output:
Transfer Time:
Grounding:
Temperature range (ambient temp):
Cooling:
Sound Level:
Protection Degree:
Protections:
MasterBus Compatible:
CONTROL PANELS/ACCESSORIES
OPTIONS
Remote ICC
(Part No. M70405000)
Remote APC
(Part No. M70405010)
Masterlink/MICC
(Part No. M70403105)
MasterView Easy
(Part No. M77010305)
MasterBus Combi Interface
(Part No. M77030475)
M36011205
M36012005
M36012505†
M36014005
12/1200-60
12/2000-100
12/2500-100
12/4000-200
12V (10-15V)
12V (10-15V)
12V (10-15V)
12V (10-15V)
1200W - 5.3A
2000W - 8.7A
2500W - 10.9A
3750W - 16.5A
2400W - 10.5A
4000W - 17.5A
5000W - 21.8A
7500W - 32A
No
Yes
Yes
No
Yes
Yes
Yes
Yes
----------------------------- 230V - 50Hz, ± 0.05% (60Hz adjustable, ± 0.05%) ---------------------------------True Sine
True Sine
True Sine
True Sine
90%
90%
90%
90%
< 9W
< 9W
< 9W
< 9W
0.5W
0.5W
0.5W
1W
--------------------------------------------- 230V (180-265V) - 45-65 Hz-----------------------------------------------60A at 14.25V
100A at 14.25V
100A at 14.25V
200A at 14.25V
1035W - 4.5A
1656W - 7.2A
2047W - 8.9A
3312W - 14.4A
14.25 / 13.25V
14.25 / 13.25V
14.25 / 13.25V
14.25 / 13.25V
--------------------------- IUoUo, automatic / 3 Step + for gel/AGM/wet/Lithium Ion ----------------------------5A
5A
5A
2 x 5A
------------------------------ Delivered as standard with 6m (20ft) cable and telejack plug -------------------LED Display
LED Display
LED Display
LED Display
371 x 318 x 143
496 x 318 x 156
496 x 318 x 156
496 x 318 x 279
14.6 x 12.5 x 5.6
19.5 x 12.5 x 6.1
19.5 x 12.5 x 6.1
19.5 x 12.5 x 11
7.8kg (17.2lbs)
11kg (24.3lbs)
11kg (24.3lbs)
21kg (46.3lbs)
----------------------------------------------- CE, E-mark ABYC A-31 ---------------------------------------------------50A
50A
50A
50A
25A
25A (35A at 120V)
25A
25A (35A @ 120V)
10ms
10ms
10ms
10ms
-------------------------------------------- Yes, Adjustably by DIP Switch ------------------------------------------------------------------------------------ -25ºC to 80ºC, > 25ºC derating power ---------------------------------------------------------------------------------------- maintenance free vario fans --------------------------------------------≤ 48 dBA at 1m
≤ 48 dBA at 1m
≤ 48 dBA at 1m
≤ 48 dBA at 1m
IP23
IP23
IP23
IP23
--------------------- Over temperature, over load, short circuit, high battery, low battery ---------------------Yes**
Yes**
Yes**
Yes**
See pages 27 - 28 for further information on Operating, Monitoring & Control
Panels and pages 23 - 26 for MasterBus system
Optional
Delivered as Standard Optional
Delivered as Standard
Indication of DC consumption, charge phase, AC present, failure, with on/off/’charger only’ switch, 6m (20ft) cable
Optional
Optional
Optional
Optional
Indication of AC consumption, AC voltage, fuse value of the shore/generator connection with power sharing
Optional
Optional
Optional
Optional
Battery consumption meter for 2 batteries, 12/24V DC with LCD read-out, remote control for Mass Sine Inverter
Optional**
Optional**
Optional**
Optional**
Touch screen panel for reading charge status, current fold-back and/or Power Sharing setting
Optional**
Optional**
Delivered as standard Optional**
------------------------ Integrates the Mass Combi in a MasterBus network (Page 24) ------------------------
* The charge characteristic can be set to your requirements. **In combination with a MasterBus Combi Interface - art no. 77030475.
12
MASTERVOLT
† PLEASE NOTE:
12/2500-100 also available with ICC panel instead of
MasterBus interface - order Part No. M36012505B
Mastervolt Mass Combi
Inverter Chargers
MASS COMBI
Part No.s in red = To Order
M36021205
M36022005
M36022505
M36024005
M36042505
M36045005
24/1200-35
24/2000-60
24/2500-60
24/4000-120
48/2500-35
48/5000-70
24V (20-31V)
24V (20-31V)
24V (20-31V)
24V (20-31V)
48V (40-62V)
48V (40-62V)
1200V - 5.3A
2000W - 8.7A
2500W - 10.9A
3750W - 16.5A
2500W - 10.9A
5000W - 21.8A
2400W - 10.5A
4000W - 17.5A
5000W - 21.8A
7500W - 32A
5000W - 21.8A
8000W - 35A
No
Yes
Yes
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
----------------------------------------------------------------------- 230V - 50Hz, ± 0.05% (60Hz adjustable, ± 0.05%) --------------------------------------------------------------------------True Sine
True Sine
True Sine
True Sine
True Sine
True Sine
92%
93%
93%
93%
93%
93%
< 9W
< 9W
< 9W
< 9W
< 9W
< 9W
0.5W
0.5W
0.5W
1W
0.5W
1W
------------------------------------------------------------------------------------- 230V (180-265V) - 45-65 Hz-------------------------------------------------------------------------------------------35A at 28.5V
60A at 28.5V
60A at 28.5V
120A at 28.5V
35A at 57V
70A at 57V
1170W - 5.1A
1965W - 8.5A
1965W - 8.5A
3900W - 17A
2295W - 10A
4590W - 20A
28.5 / 26.5V
28.5 / 26.5V
28.5 / 26.5V
28.5 / 26.5V
57/53V
57/53V
------------------------------------------------------------------ IUoUo, automatic / 3 Step + for gel/AGM/wet/Lithium Ion ------------------------------------------------------------------------5A
5A
5A
2 x 5A
n/a
n/a
---------------------------------------------------------------- Delivered as standard with 6m (20ft) cable and telejack plug --------------------------------------------------------------------LED Display
LED Display
LED Display
LED Display
LED Display
LED Display
371 x 318 x 143
496 x 318 x 156
496 x 318 x 156
496 x 318 x 279
496 x 318 x 156
496 x 318 x 279
14.6 x 12.5 x 5.6
19.5 x 12.5 x 6.1
19.5 x 12.5 x 6.1
19.5 x 12.5 x 11
19.5 x 12.5 x 6.1
19.5 x 12.5 x 11
7.8kg (17.2lbs)
11kg / 24.3lbs
11kg / 24.3lbs
21kg / 46.3lbs
11kg / 24.3lbs
21kg / 46.3lbs
--------------------------------------------------------------------------------------- CE, E-mark ABYC A-31 ----------------------------------------------------------------------------------------------50A
50A
50A
50A
50A
50A
25A
25A (35A @ 120V)
25A
25A (35A @ 120V)
25A
25A
10ms
10ms
10ms
10ms
10ms
10ms
---------------------------------------------------------------------------------- Yes, Adjustably by DIP Switch ---------------------------------------------------------------------------------------------------------------------------------------------------------------------- -25ºC to 80ºC, > 25ºC derating power -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- maintenance free vario fans --------------------------------------------------------------------------------------------≤ 48 dBA at 1m
≤ 48 dBA at 1m
≤ 48 dBA at 1m
≤ 48 dBA at 1m
≤ 48 dBA at 1m
≤ 48 dBA at 1m
IP23
IP23
IP23
IP23
IP23
IP23
--------------------------------------------------------- Over temperature, over load, short circuit, high battery, low battery -------------------------------------------------------------------Yes**
Yes**
Yes**
Yes**
Yes**
Yes**
Optional
Delivered as Standard
Optional
Delivered as Standard
Optional
Optional
--------------------------- Indication of DC consumption, charge phase, AC present, failure, with on/off/’charger only’ switch, and 6m (20ft) cable ------------------------------Optional
Optional
Optional
Optional
Optional
Optional
-------------------------------- Indication of AC consumption, AC voltage, fuse value of the shore/generator connection with power sharing ------------------------------------Optional
Optional
Optional
Optional
Optional
Optional
------------------------- Battery consumption meter for two batteries, 12/24V DC with LCD read-out and remote control for Mass Sine Inverter-----------------------------Optional**
Optional**
Optional**
Optional**
Optional**
Optional**
----------------------------------------- Touch screen panel for reading charge status, current fold-back and/or Power Sharing setting ----------------------------------------------Optional**
Optional**
Delivered as standard
Optional**
Delivered as standard
Delivered as standard
---------------------------------------------------------- Integrates the Mass Combi in a MasterBus network (Page 24) ------------------------------------------------------------------------
All Mass Combis are compatible
with the MasterBus System
MASTERVOLT
13
Mastervolt DC-DC
Converters
DC MASTER CONVERTERS
DC MASTER CONVERTERS
M81400300
The voltage required for direct current (DC) can vary considerably onboard a yacht.
A bowthruster or a winch often works at 24V, while navigation and communication
equipment mostly requires 12V. By using a DC-DC converter, other voltages than
applied in your basic system can be reached.
M81400100
They also ensure that all your onboard equipment
has a stable power supply with the right voltage.
• Recreational and semi-professional use.
• Easy to install using included mounting bracket.
• Excellent price/performance ratio.
• More power available for two minute intervals, ideal
for active marine telephone use.
Part No.
INPUT SPECIFICATIONS
Model:
Nominal Input Voltage:
Input Range:
OUTPUT SPECIFICATIONS
Nominal Output Voltage:
Maximum Power:
Nominal Power:
Current Max. 2 minutes*/continuous:
DC Consumption:
GENERAL SPECIFICATIONS
Dimensions (H x W x D in mm):
Dimensions (H x W x D in inch):
Weight:
Approvals:
Galvanic Isolation:
Stabilised:
Connections input/output:
Temperature Range (ambient temp):
Cooling:
Sound Level:
Protection Degree:
M81400200
M81400100
24/12-3A
24V
20-32V DC
M81400200
24/12-6A
24V
20-32V DC
M81400300
24/12-12A
24V
20-32V DC
M81400330 (not shown)
24/12-24A
24V
20-32V DC
13.6V
82W
41W
6A/3A
<10mA
13.6V
136W
82W
10A/6A
<10mA
13.6V
245W
164W
18A/12A
<10mA
13.6V
408W
326W
30A/24A
<10mA
67 x 87 x 50
89 x 87 x 50
127 x 87 x 50
167 x 87 x 50
2.6 x 3.4 x 2
3.5 x 3.4 x 2
5 x 3.4 x 2
6.6 x 3.4 x 2
225g (0.5lbs)
270g (0.6lbs)
405g (0.9lbs)
635g (1.3lbs)
CE, E-mark
CE, E-mark
CE, E-mark
CE, E-mark
No
No
No
No
Yes
Yes
Yes
Yes
Fast-on
Fast-on
Fast-on
Fast-on
According to specifications: 0 to 30ºC, thereafter linear derating till 80ºC/storage temp: -25ºC to 85ºC
Natural Cooling
Natural Cooling
Natural Cooling
Natural Cooling
<30 dBA at 1m
<30 dBA at 1m
<30 dBA at 1m
<30 dBA at 1m
IP53
IP53
IP53
IP53
DC MASTER CONVERTERS WITH GALVANIC ISOLATOR
Part No.
INPUT SPECIFICATIONS
Model:
Nominal Input Voltage:
Input Range:
OUTPUT SPECIFICATIONS
Nominal Output Voltage:
Maximum Power:
Nominal Power:
Current Max. 2 minutes*/continuous:
DC Consumption:
GENERAL SPECIFICATIONS
Dimensions (H x W x D in mm):
Dimensions (H x W x D in inch):
Weight:
Approvals:
Galvanic Isolation:
Stabilised:
Connections input/output:
Temperature Range (ambient temp):
Cooling:
Sound Level:
Protection Degree:
14
M81500100
24/12-3A
24V
20-32V DC
M81500200
24/12-6A
24V
20-32V DC
M81500300
24/12-12A
24V
20-32V DC
M81500350 (not shown)
24/12-24A
24V
20-32V DC
13.6V
82W
41W
6A/3A
<10mA
13.6V
136W
82W
10A/6A
<10mA
13.6V
245W
164W
18A/12A
<10mA
13.6V
408W
326W
30A/24A
<10mA
89 x 87 x 50
127 x 87 x 50
167 x 87 x 50
217 x 87 x 50
3.5 x 3.4 x 2
5 x 3.4 x 2
6.6 x 3.4 x 2
6.6 x 3.4 x 2
290g (0.6lbs)
410g (0.9lbs)
590g (1.3lbs)
850g (1.8lbs)
CE, E-mark
CE, E-mark
CE, E-mark
CE, E-mark
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Fast-on
Fast-on
Fast-on
Fast-on
According to specifications: 0 to 30ºC, thereafter linear derating till 80ºC/storage temp: -25ºC to 85ºC
Natural Cooling
Natural Cooling
Natural Cooling
Natural Cooling
<30 dBA at 1m
<30 dBA at 1m
<30 dBA at 1m
<30 dBA at 1m
IP53
IP53
IP53
IP53
MASTERVOLT
Mastervolt DC-DC
Converters
DC MASTER CONVERTERS
M81400500
M81400350
M81400700
M81400400
M81400600
M81400350
24/12-50A
24V
20-32V DC
M81400400
12/24-3A
12V
10-15.5V DC
M81400500
12/24-7A
12V
10-15.5V DC
M81400600
48/12-6A
48V
40-62 V DC
M81400700
48/12-9A
48V
40-62 V DC
M81400800 (not shown)
48/12-20A
48V
40-62 V DC
13.6V
720W
500W
60A/50A
<10mA
27.2V
109W
82W
4A/3A
<110mA
27.2V
245W
191W
9A/7A
<120mA
13.6V
109W
82W
8A/6A
<15mA
13.6V
132W
108W
11A/9A
<15mA
13.6V
326W
272W
24A/20A
<100mA
300 x 76 x 110
89 x 87 x 50
167 x 87 x 50
89 x 87 x 50
127 x 87 x 50
217 x 87 x 50
11.8 x 3 x 4.3
3.5 x 3.4 x 2
6.6 x 3.4 x 2
3.5 x 3.4 x 2
5 x 3.4 x 2
6.6 x 3.4 x 2
1.2kg (2.6lbs)
290g (0.6lbs)
610g (1.3lbs)
415g (0.9lbs)
415g (0.9lbs)
765g (1.6lbs)
CE, E-mark
CE, E-mark
CE, E-mark
CE, E-mark
CE, E-mark
CE, E-mark
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Fast-on
Fast-on
Fast-on
Fast-on
Fast-on
Fast-on
----------------------------- According to specifications: 0 to 30ºC, thereafter linear derating till 80ºC/storage temp: -25ºC to 85ºC -----------------------------------Natural Cooling
Natural Cooling
Natural Cooling
Natural Cooling
Natural Cooling
Natural Cooling
<30 dBA at 1m
<30 dBA at 1m
<30 dBA at 1m
<30 dBA at 1m
<30 dBA at 1m
<30 dBA at 1m
IP53
IP53
IP53
IP53
IP53
IP53
DC MASTER CONVERTERS WITH GALVANIC ISOLATOR
M81500100
M81500200
M81500400
24/24-3A
24V
20-32V DC
M81500500
24/24-7A
24V
20-32V DC
M81500600 (not shown)
12/12-3A
12V
10-15.5V DC
27.2V
109W
82W
4A/3A
<25mA
27.2V
245W
191W
9A/7A
<25mA
13.6V
54W
41W
4A/3A
<100mA
127 x 87 x 50
185 x 87 x 50
67 x 87 x 50
5 x 3.4 x 2
7 x 3.4 x 2
2.6 x 3.4 x 2
590g (1.3lbs)
820g (1.8lbs)
290g (0.6lbs)
CE, E-mark
CE, E-mark
CE, E-mark
Yes
Yes
Yes
Yes
Yes
Yes
Fast-on
Fast-on
Fast-on
-------------------------------- See table page 14 ----------------------------------Natural Cooling
Natural Cooling
Natural Cooling
<30 dBA at 1m
<30 dBA at 1m
<30 dBA at 1m
IP53
IP53
IP53
M81500300
M81500400
M81500500
MASTERVOLT
15
Mastervolt DC-DC
Converters
MAC & MAGIC CONVERTERS
MAC & MAGIC CONVERTERS
The voltage required for direct current (DC) can vary considerably onboard a yacht. A bowthruster or a winch often works at 24V, while navigation and
communication equipment mostly requires 12V. By using a DC-DC converter, other voltages than applied in your basic system can be reached. They also
ensure that all your onboard equipment has a stable power supply with the right voltage.
The Magic models can regulate the voltage both up and down to ensure
an optimal voltage stabilisation, even when the battery voltage fluctuates
due to heavy loads. The galvanic isolation between input and output
prevents disruptions to, for instance, communication equipment.
• Professional use.
• Battery charger and dimmer function.
• Parallel connection.
• Adjustable output voltage.
• Voltage stabilisation for a longer lifespan of halogen lights, etc.
Part No.
M81200100
M81300100
INPUT SPECIFICATIONS
Model:
Mac 24/12-20
Magic 24/12-20
Nominal Input Voltage:
24V
24V
Input Range:
20-32V DC
19-32V DC
Input Range, 3-step + charge mode:
24-32V DC
24-32V DC
Lower Input Set Point:
20V DC*
20V DC*
Delay Lower Input Set Point:
30 sec.*
30 sec.*
OUTPUT SPECIFICATIONS
Factory Setting:
13.6V DC*
13.6V DC*
Voltage Adjustable:*
10-15V DC
10-15V DC
Output Voltage Dimmer:*
4-13V DC
4-13V DC
Stabilised:
------------------------ 2% at extremes of temperatures, load and input ---------------------Ripple:
Max 1% peak peak
Max 1% peak peak
Power (max./nominal):
300 / 270W
300 / 300W
Max. Current:
20A
20A
Charge Current - 3-step + mode:
16A
16A
GENERAL SPECIFICATIONS
Galvanic Isolation:
No
Yes
Voltage Limited:
Yes
Yes
Efficiency:
------------------- >90% (at nominal input voltage, full load); 92% peak ----------------------Protected Against Overload:
Yes
Yes
Protected Against Over Temperature:
Yes
Yes
Dimmer Function:
Yes, by external momentary switch via fast-on connection, to be activated by DIP-switch setting
Alarm Contact:
No
Yes (fast-on connector)
Dimensions (H x W x D in mm):
190 x 130 x 61
227 x 154 x 81
Dimensions (H x W x D in inch):
7.5 x 5.1 x 2.4
8.9 x 6.1 x 3.2
Weight:
1.0kg (2.2lbs)
1.8kg (4lbs)
Approvals:
CE
CE
TECHNICAL SPECIFICATIONS
3-step + Charge Option:
Yes (DIP switch settings)
Yes (DIP switch settings)
DC Consumption:
<30mA
<115mA
Connections input/output:
-------------------- Screw terminals, maximum wire size 16mm2 / AWG5 ---------------------Temperature Range (ambient temp.):
---------------------------- -25ºC to 80ºC, > 40ºC derating power --------------------------------Cooling:
Natural Cooling
Maintenance free Vario fans
Sound Level:
<30 dBA at 1m
<48 dBA at 1m
Protection Degree:
IP21
IP21
MasterBus Compatible
------- Yes, by means of MasterBus Serial Interface (Part No. M77030450) ----------
CONTROL PANELS/ACCESSORIES
OPTIONS
PC-Link
(Part No. M21730300)
MasterView Easy
(Part No. M77010305)
MasterBus Serial Interface
(Part No. M77030450)
* Adjustable with MasterAdjust software.
16
MASTERVOLT
See pages 27 - 28 for further information on Operating, Monitoring & Control
Panels, and pages 23-26 for MasterBus System
Interface between Magic converter and PC, in combination with the MasterAdjust software (free to
download). The PC-Link can be directly connected to a computer serial port. Galvanically isolated.
Touch screen panel for reading status and dimmer function settings (page 22).
Integrates the Mac & Magic converters in a MasterBus network (page 24).
Mastervolt DC-DC
Converters
MAGIC CONVERTERS
M81300200
Magic 24/24-20
24V
19-32V DC
24-32V DC
20V DC*
30 sec.*
M81300400
Magic 12/12-20
12V
11-16V DC
12-16V DC
10V DC*
30 sec.*
M81300300
Magic 12/24-10
12V
11-16V DC
12-16V DC
10V DC*
30 sec.*
27.2V DC*
13.6V DC*
27.2V DC*
20-28.5V DC
10-15V DC
20-28.5V DC
8-26V DC
4-13V DC
8-26V DC
-------------------------------------------------------------- 2% at extremes of temperatures, load and input -----------------------------------------------------------------------Max 1% peak peak
Max 1% peak peak
Max 1% peak peak
580 / 580W
300 / 300W
300 / 300W
20A
20A
10A
16A
16A
8A
Yes
Yes
Yes
Yes
Yes
Yes
------------------------------------------------------------ >90% (at nominal input voltage, full load); 92% peak --------------------------------------------------------------------Yes
Yes
Yes
Yes
Yes
Yes
------------------------------------ Yes, by external momentary switch via fast-on connection, to be activated by DIP-switch setting ------------------------------------------------Yes (fast-on connector)
Yes (fast-on connector)
Yes (fast-on connector)
227 x 154 x 81
227 x 154 x 81
227 x 154 x 81
8.9 x 6.1 x 3.2
8.9 x 6.1 x 3.2
8.9 x 6.1 x 3.2
1.8kg (4lbs)
1.8kg (4lbs)
1.8kg (4lbs)
CE
CE
CE
Yes (DIP switch settings)
Yes (DIP switch settings)
Yes (DIP switch settings)
<115mA
<115mA
<115mA
------------------------------------------------------------ Screw terminals, maximum wire size 16mm2 / AWG5 --------------------------------------------------------------------------------------------------------------------------------------- -25ºC to 80ºC, > 40ºC derating power -------------------------------------------------------------------------------Maintenance free Vario fans
Maintenance free Vario fans
Maintenance free Vario fans
<48 dBA at 1m
<48 dBA at 1m
<48 dBA at 1m
IP21
IP21
IP21
------------------------------------------------- Yes, by means of MasterBus Serial Interface (Part No. M77030450) -----------------------------------------------------------
OPTIONS
PC-Link
(Part No. M21730300)
MasterView Easy
(Part No. M77010305)
MasterBus Serial Interface
(Part No. M77030450)
Interface between Magic converter and PC, in combination with the MasterAdjust software (free to
download). The PC-Link can be directly connected to a computer serial port. Galvanically isolated.
Touch screen panel for reading status and dimmer function settings (page 22).
Integrates the Mac & Magic converters in a MasterBus network (page 24).
MASTERVOLT
17
Mastervolt Battery
Accessories
BATTERY ACCESSORIES
M83007021
M83007030
Part No.
Model
Mastervolt’s BI battery isolators are based on
Max. Output Charger:
conventional diode technology. The diode voltage
Max. Output Alternator:
drop (ca. 0.6 V) can be compensated for by
Compensation Diode:
adapting the output current of the connected
Dimensions (H x W x D)mm:
charger. Mastervolt battery chargers and Alpha
Dimensions (H x W x D)inch:
Pro alternator regulators come as standard with
Weight:
automatic compensation for voltage drops.
No. of Battery Banks:
BI BATTERY ISOLATORS
M83012021
M83007021
BI 702-S
25/50A
70A
Yes
157x140x80mm
(6.2x5.5x3.2")
0.58kg (1.3lbs)
2
M83012031
M83007030
M83012021
M83012031
BI 703
BI 1202-S
BI 1203-S
25/50A
80A
80A
70A
120A
120A
No
Yes
Yes
----------------------- 207 x 140 x 80mm --------------------------------- 8.2 x 5.5 x 3.2" ----------1.1kg (2.4lbs)
1.2kg (2.65lbs) 1.3kg (2.9lbs)
3
2
3
BATTERY MATE IG
The Battery Mate is compatible with any type of
alternator/battery charger, in both existing and
new systems.
As the voltage loss between the alternator and
battery is negligible, the Battery Mate performs
far better than conventional battery isolators.
This ensures fast and complete charging of your
batteries without having to make additional
adjustments to the alternator.
The Mastervolt Battery Mate can be used in any
application even if the standard alternator needs
external excitation or voltage sensing. In this
case the additional IG contact can be connected.
CHARGE MATE
An auxiliary onboard power supply is increasingly
common. As a second battery can prevent the
main battery from depleting and being unable to
start, this seems like a safe and reliable solution.
The second battery, however, also has to be
charged regularly. Mastervolt has the solution:
The Charge Mate connects both batteries with a
voltage relay while charging, and keeps them
isolated at other times. The Charge Mate is
especially practical for small systems.
M83116025
Part No.
Model
Max. Output of Battery Charger:
Max. Output of Alternator:
Dimensions (H x W x D):
Weight:
No. of Battery Banks:
Part No.
Model
Battery Voltage:
Continuous Rating:
Inrush Current (250ms):
Switch on Voltage:
Switch on Delay:
Switch off Voltage:
M83116035
M83125035
M83116025
M83116035
M83125035
1602
1603
2503
120A
120A
200A
160A
160A
250A
-------------------- 207 x 140 x 80mm (8.2 x 5.5 x 3.2") ------------------1Kg (2.2lbs)
1Kg (2.2lbs)
1Kg (2.2lbs)
2
3
3
NEW
M83301202
1202
12/24V
120A
2000A
13...15V (12V) / 26...30V (24V)
5 seconds
<12.75V (12V)
<25.50V (24V)
Switch off Delay:
No
Optional temperature: -40 to 65ºC
Dimensions, H x W x D: 76 x 46 x 46mm (3 x 1.8 x 1.8'')
Weight:
0.125kg (0.28lbs)
Protection degree:
IP21
Number of Modes:
On, off, auto, emergency start
Power Consumption:
switch open: <1mA @ 12/24V DC
M83302502
2502
12/24V
500A
2000A
13...15V (12V) / 26...30V (24V)
5 seconds
<12.25...> 15V (12V)
<25.5...> 30V (24V)
No
-40 to 65ºC
90 x 80 x 85mm (3.5 x 3.1 x 3.3'')
0.65kg (1.4lbs)
IP21
On, off, auto, emergency start
switch open: <1mA @ 12/24V DC
M83302502
M83301202
BATTERY WATCH
The Battery Watch is an essential element of any
well-equipped battery system, offering you a 600
gram electronic watchdog that ensures a much
longer lifespan for your batteries.
The unit monitors the optimum condition of your
batteries and can also be used as a main battery
isolation switch. LED lights provide a clear read out
and the undervoltage can be set using DIP switches.
18
MASTERVOLT
Part No.
Maximum Load:
Input Voltage:
Switch off under voltage 12V:
Switch off under voltage 24V:
Dimensions (L x W x H):
Weight:
M83200150
150A
8-32V DC
9-12V DC
18-24V DC
157 x 140 x 80mm (6.2 x 5.5 x 3.2")
0.6Kg (1.3lbs)
Mastervolt 12V & 6V
AGM Batteries
AGM BATTERIES
M62000550
M62000700
M62000900
M62001300
M62002250
M62001600
M62002700
AGM 12V BATTERIES
• Ideal universal battery
• Excellent starter function
• Perfect upgrade for wet lead acid batteries
Part No.
Model
Nominal Voltage:
Capacity C20:*
CCA to DIN:
CCA to SAE:
Dimensions (incl. poles):
L x W x H (mm)
L x W x H (inches)
Weight:
• Same initial power surge in an AGM 12/90Ah
as in a 180Ah wet lead-acid battery
• Use of thicker plates allows deep discharging
• Glass-fibre technology ensures low
internal resistance
• Also for cyclic use
M62000550
12/55
12V
55Ah
300A
480A
M62000700
12/70
12V
70Ah
385A
615A
M62000900
12/90
12V
90Ah
535A
850A
M62001300
12/130
12V
130Ah
585A
935A
M62001600
12/160
12V
160Ah
630A
1000A
M62002250
12/225
12V
225Ah
815A
1300A
M62002700
12/270
12V
270Ah
1000A
1600A
257x132x207
10.1x5.2x8.2
17kg
37.5lbs
348x167x181
13.7x6.6x7.1
21.5kg
47lbs
330x173x237
13x6.8x9.3
28kg
62lbs
410x177x228
16.1x7x9
37.6kg
83lbs
485x170x245
19.1x6.7x9.6
42.3kg
93lbs
522x240x241
20.6x9.4x9.5
63.5kg
140lbs
522x268x243
20.6x10.6x9.6
73kg
161lbs
* C20 standard = battery capacity at a discharge time of 20 hours, til 1.75V per cell.
Part No.
Model
Nominal Voltage:
Capacity C20:*
CCA to DIN:
CCA to SAE:
Dimensions (incl. poles):
L x W x H (mm)
L x W x H (inches)
Weight:
AGM 12V SLIMLINE BATTERIES
• Ideal universal battery; also for
starter functions
• Compressed AGM technology
• Saves up to 15% in volume
• Saves up to 15% in weight
• Miniscule footprint; 2x 185 Ah
for a 200Ah battery footprint
• Two-year warranty
NEW
M63001150
12/115
12V
115Ah
545A
910A
M63001500
12/150
12V
150Ah
610A
1020A
M63001850
12/185
12V
185Ah
750A
1250A
560x110x233
22x4.3x9.2
35.6kg
78lbs
560x110x280
22x4.3x11
40.5kg
89lbs
560x126x280
22x5x11
54kg
119lbs
* C20 standard = battery capacity at a discharge time of 20 hours, til 1.75V per cell.
AGM 6 VOLT SERIES
NEW
• Ideal solution for cyclic applications,
such as electric propulsion,
wheelchairs, golf carts, etc.
• Easy configuration of 12/24/48 V
battery terminals, with high capacity
• Double pole for easy installation
• No gas formation with normal use
• Two-year warranty
Part No.
Model
Nominal Voltage:
Capacity C20:*
Dimensions (incl. poles):
L x W x H (mm)
L x W x H (inches)
Weight:
M61002600
6/260 Ah
6V
260Ah
M61003400
6/340 Ah
6V
340Ah
M61004000
6/400 Ah
6V
400Ah
295x180x298
11.6x7.1x11.7
36kg
79.3lbs
295x180x366
11.6x7.1x14.4
48.9kg
107.7lbs
295x180x428
11.6x7.1x16.9
55.7kg
122.7lbs
* C20 standard = battery capacity at a discharge time of 20 hours, til 5.25V.
Part No.s in red = To Order Only
DELIVERY
Unable to send via carrier. Please contact your
local Aquafax sales depot for delivery methods.
MASTERVOLT
19
Mastervolt 2V Gel &
Lithium Ion Batteries
MVSV BATTERIES
M68000500
500
2V
500Ah
M68000580
580
2V
580Ah
M68000750
750
2V
750Ah
M68001000
1000
2V
1000Ah
125 x 207 x 401
4.9 x 8.2 x 15.8
22kg
48.5lbs
125 x 207 x 517
4.9 x 8.2 x 20.4
32kg
70.5lbs
146 x 207 x 517
5.7 x 8.2 x 20.4
37kg
81.6lbs
167 x 207 x 517
6.4 x 8.2 x 20.4
42kg
92.6lbs
146 x 207 x 693
5.7 x 8.2 x 27.3
50kg
110.2lbs
211 x 192 x 693
8.3 x 7.6 x 27.3
68kg
150lbs
M68001250
1250
2V
1250Ah
M68001500
1500
2V
1500Ah
M68001650
1650
2V
1650Ah
M68002200
2200
2V
2200Ah
M68002700
2700
2V
2700Ah
211 x 234 x 693
8.3 x 9.2 x 27.3
82kg
180.8lbs
211 x 276 x 693
8.3 x 10.9 x 27.3
98kg
216lbs
211 x 276 x 843
8.3 x 10.9 x 33.2
112kg
247lbs
214 x 399 x 819
8.4 x 15.7 x 32.3
153kg
337.3lbs
214 x 488 x 819
8.4 x 19.2 x 32.2
196kg
432.1lbs
Part No.s in red = To Order Only
Lithium Ion batteries have a high energy density and are perfect for cyclic applications. Compared to
traditional lead-acid batteries, Lithium Ion batteries offer savings of up to 70% in volume and weight,
while the number of charging cycles is three times as large.
Another major benefit of the Mastervolt Li-ion battery is that it is
equipped with a Cell Management System, which automatically
compensates for any imbalance between the cells to guarantee a
longer battery lifespan.
NEW
M66010320
12/320
13.25V
320Ah/4.3kWh
M66020160
24/160
26.5V
160Ah/4.3kWh
623 x 199 x 345
24.5 x 7.8 x 13.6
±55kg, 90Wh/kg
121lbs
623 x 199 x 345
24.5 x 7.8 x 13.6
±55kg, 90Wh/kg
121lbs
* Battery capacity at a discharge time of 1 till 20 hours
MASTERVOLT
M68002700
M68000420
420
2V
420Ah
LITHIUM ION BATTERIES
20
M68000580
M68000280
280
2V
280Ah
* C10 = battery capacity at a discharge time of 10 hours, till 1.80 V per cell
Part No.
Model
Nominal Voltage:
Capacity C20:*
Dimensions (incl. poles)
LxWxH (mm)
LxWxH (inches)
Weight:
M68002200
M68000500
M68001650
M68000280
M68001500
Part No.
Model
Nominal Voltage:
Capacity C20:*
Dimensions (incl. poles)
LxWxH (mm)
LxWxH (inches)
Weight:
M68001250
Part No.
Model
Nominal Voltage:
Capacity C20:*
Dimensions (incl. poles)
LxWxH (mm)
LxWxH (inches)
Weight:
M68001000
M68000750
• Long lifespan
• Many charging and discharging cycles
• Charges quickly
• Extremely sustainable battery for large installations
• Robust build for longer lifespan
• Deep discharging without problems
• Can be installed horizontally or vertically
• Seven-year warranty (pro rata)
M68000420
MVSV 2V GEL BATTERIES
• Highly advanced technology.
• Multifunctional battery of 4.3 kWh
• 12 and 24 Volt available
• Saves up to 70% in space
• Saves up to 70% in weight
• Triple the lifespan
• Ultra-fast charging and discharging
(up to one C)
• High efficiency
• MasterBus communication with every
Mastervolt battery charger
• Integrated system for battery
management including cell balancing
• Safest Li-ion available
• Designed for systems up to 250V DC
• Suitable for onboard AC networks and
electric sailing
DELIVERY
Unable to send via carrier. Please contact your
local Aquafax sales depot for delivery methods.
Mastervolt 12V Gel
Batteries & Terminals
MVG BATTERIES
M64000250
M64000550
M64000850
M64001200
MVG 12V GEL BATTERIES
• Perfect service battery for medium and
large 12V and 24V systems.
• Extremely long lifespan.
• No gas formation with normal use.
• Fast recharge, high charge current possible.
• For intensive cycle use with a high number
of charge/discharge cycles.
• Very low self discharge.
• Two-year warranty
Part No.
Model
Nominal Voltage:
Capacity C20:*
CCA to DIN:
CCA to SAE:
Dimensions (incl. poles)
LxWxH (mm)
LxWxH (inches)
Weight:
M64001400
M64002000
M64000250
12/25
12V
25Ah
110A
175A
M64000550
12/55
12V
55Ah
230A
380A
M64000850
12/85
12V
85Ah
270A
450A
M64001200
12/120
12V
120Ah
450A
760A
M64001400
12/140
12V
140Ah
540A
920A
M64002000
12/200
12V
200Ah
630A
1100A
167 x 176 x 126
6.6 x 6.9 x 5
9.6kg
21.2lbs
261 x 136 x 230
10.3 x 5.4 x 9
19kg
41.9lbs
330 x 171 x 236
13 x 6.7 x 9.3
32.6kg
71.9lbs
513 x 189 x 223
20.2 x 7.4 x 8.8
41kg
90.4lbs
513 x 223 x 223
20.2 x 8.8 x 8.8
49kg
108lbs
518 x 274 x 238
20.4 x 10.8 x 9.4
70kg
154.3lbs
* C20 standard = battery capacity at a discharge time of 20 hours, til 10.5V.
MASTERVOLT BATTERY TERMINALS & TERMINAL COVERS
Type A
Type B
Type C
Type D
For more terminals and covers see our
Section 8 catalogue or visit our website:
www.aquafax.co.uk
DELIVERY
Unable to send via carrier. Please contact your
local Aquafax sales depot for delivery methods.
Description
Type A Battery Terminal Double plus flat
Type A Battery Terminal Double minus flat
Type B Battery Terminal with nut M8 plus
Type B Battery Terminal with nut M8 minus
Type C1 Battery Terminal plus flat
Type C2 Battery Terminal minus flat
Type D Battery Terminal with bolt M10 plus
Type D Battery Terminal with bolt M10 minus
Type D Battery Terminal with bolt M12 plus
Type D Battery Terminal with bolt M12 minus
Part No.
M68060500
M68060600
M68060100
M68060200
M68060300
M68060400
M68060700
M68060800
M68060900
M68061000
Description
Type A Cover, Red for part no. M68060500
Type A Cover, Black for part no. M68060600
Type B Cover, Red for part no. M68060100
Type B Cover, Black for part no. M68060200
Type C1 Cover, Red for part no. M68060300
Type C2 Cover, Black for part no. M68060400
Type D Cover, Red for part no. M68060700/M68060900
Type D Cover, Black for part no. M68060800/M68061000
Part No.
M68451902
M68451914
M68456902
M68456914
M68454002
M68453014
M68457302
M68457314
MASTERVOLT
21
Mastervolt
MasterView Panels
MASTERVIEW PANELS
With MasterView panels you only require one panel, even for larger electrical systems, and can save time on making
connections, interpreting data and finding the latest system information.
MASTERVIEW SYSTEM
The MasterView System is the next step
up from simpler options such as
MasterView Read-out (for load status)
and MasterView Easy (status of a limited
number of products) in terms of
practicality and ease of operation.
Part No:.
Display:
Dimensions (H x W):
MasterBus Connection:
Power:
Power Consumption:
Protection Degree:
Weight:
Languages:
M77010400
10.4 inch colour touch screen
222 x 276 mm / 8.7 x 10.8 inch
by means of System Panel Controller (delivered as standard)
by means of System Panel Controller (delivered as standard)
28W
IP65 (front)
1.4 kg / 3.1 lbs
ENG, NL, DE, SP, IT, FRA, FIN, SWE, DEN, NOR
22
• Home screen - A status overview of power
sources. Basic control is possible, for e.g
turning on and off your inverter
• Digital switching screen - shows the layout
of your boat, lights and selected pumps.
• System Overview - Overview of your
electric system. Incorrect line voltages are
shown in red, inactive circuits in grey.
• Tank Level Screen - Monitors the contents
of up to 20 tanks. Warning signals can be
installed
• Favourites Screen - Custom designed for
e.g. one overview page, one or two breaker
pages, an engine information page and a
NMEA2000 information page.
System Panel Controller
Delivered as standard with MasterView System
available separately to order (see page 25 for details)
Part No. M77031900
MASTERVIEW EASY
MASTERVIEW READ-OUT
This multifunctional display can monitor every MasterBus
product. Connected to the Mastershunt it functions as a
battery monitor, connected to the generator as a
generator panel. These and other functions can also take
place simultaneously and you can create a favourites
page showing all your main information.
Remote panel for reading
the charge status of your
battery charger, including
error notifications.
This touch screen panel offers excellent
readability and easy operation. The grey
button allows you to turn the display on and
off or (un)lock the touch screen. Further
operation is via the touch screen.
The first (of three) operation level shows a
quick system overview - the information you
need on a day-to-day basis. Product overview
& configuration offers more detailed
information and the option to change settings.
As the MasterBus plug & play connection
offers both data and power, only one cable is
needed to connect the panel.
Part No:.
Display:
Dimensions (H x W):
MasterBus Connection:
Power:
Power Consumption:
Protection Degree:
Weight:
Languages:
Mastervolt‘s MasterView System brings an end to
cluttered, unclear and excessive information. Based on
their in-house developed software combined with a userfriendly 10.4-inch colour touchscreen, the MasterView
System intelligently connects all the power sources and
loads (generator, charger, bilge pump, engine, lighting, air
conditioning, etc.) via the MasterBus. It provides all the
information you need on your electric system in one clear
overview on an organised, intuitively operated panel.
The full colour graphical display helps installers to
configure the electrical onboard system, and is extremely
easy to reproduce. Configuration, monitoring and
operation becomes easier, cheaper, lighter, faster & good
looking. The software makes complicated electrical
systems understandable for boat owners.
• Clearly lit display.
• Push button for on/off and blockade for
unwanted operation.
• Touchscreen operation for all functions
• White background lighting - red colour
for alarm function or night lights
• Buzzer and alarm function
• Installation requires only one MasterBus
cable for both data and power supply
• Low consumption
• Easy to install, the panel can be flush
and surface mounted
M77010305
3.5 inch touch screen
110 x 110 mm / 4.3 x 4.3 inch
Yes
MasterBus
160mW
IP21
230g / 0.51 lbs
ENG, NL, DE, SP, IT, FRA, FIN, SWE, DEN, NOR
MASTERVOLT
Part No:.
Display:
Dimensions (H x W):
MasterBus Connection:
Power:
Power Consumption:
Protection Degree:
Weight:
M77010050
7 LEDs
60 x 65 mm / 2.4 x 2 x 6 inch
Yes
MasterBus
144mW
IP21
70g / 0.15 lbs
MASTERVIEW READ-OUT OEM
If your dashboard is full and does not
offer space for a MasterView panel,
this module allows you to integrate
the MasterBus Read-out into your
own control panel.
Part No. M77010030
PART NO.S IN RED = TO ORDER ONLY
Mastervolt
MasterBus System
MASTERBUS SYSTEM - COMPONENTS
THE EASE OF DIGITAL DISTRIBUTION
The advanced electric systems onboard superyachts are now within easy reach
thanks to the MasterBus platform (single communication protocol with high-speed
CANbus technology). The intelligent one-cable MasterBus requires only half the
cables of a standard system, saving you both space and weight. You can automate
your system to meet all your requirements.
Thanks to galvanic isolation, nearly all devices can supply power to the MasterBus,
ensuring a safe and stable network. The wide range of interfaces and modules
allows you to connect any equipment you wish to your MasterBus system and
manage, monitor or operate it locally, centrally or even from your home address.
MASTERSHUNT 500
This ultra-modern battery monitor
provides detailed information on the
status of your batteries, including
voltage, current, remaining time and
used capacity in percentages so no
more unpleasant surprises.
With an intelligent connection system,
the MasterShunt is easily connected to
the DC Distribution. The integrated system clock
combined with command-based events automates your system according
to your needs. A good example of such system automation: The generator
should start automatically when the batteries are almost depleted.
The MasterShunt also has a built-in robust main fuse that can safely break
short-circuit currents of 50,000 Amps. Part No. M77020100
DC DISTRIBUTION 500
The DC Distribution 500 is the smallest distribution model available. It
connects up to four DC devices to the DC groups, such as a battery
charger, inverter, alternators and solar panels. With the included plug &
play cable it can be easily connected to the MasterBus network. The
MasterView panel gives all fuses
logical names, for instance,
referring to the connected
equipment, to ensure you
receive understandable error
notifications (for example:
battery charger fuse defect).
Part No. M77020200
DIGITAL DC 10x10A
As the pinnacle of system intelligence, the Mastervolt Digital DC 10x10A has
ten 10A outputs for all functions including lighting, pumps or electronics.
It comes standard with intelligent alarm functions and luxury options include:
• Follow me home (light stays on for a specific time after you leave the vessel).
• (Delayed) dimming of lights (including ten built-in dimmers).
• Alarm signal for overload.
• Every output has a hardware and software fuse.
• Reset the fuses via the MasterBus network.
• Possibility of higher currents (up to 100 A) with parallel switching of
multiple outputs.
Part No. M77020400
NEW
Professional Perspective
MasterBus also makes life easier for designers, builders and
installers of power systems with less material, less work, less fuss
and an easy testing method.
Moreover, it is available in ten languages and offers the same user
interface for all (Mastervolt) products, such as
battery chargers, inverters, generators, batteries or
other devices. All control panels have an identical
layout, with or without PC software. MasterBus
makes your life easier.
Part No.
H x W x D:
Weight:
Battery Types:
Battery Voltage:
Current:
MasterBus Powering:
Main Fuse:
System Functionality:
Programmable alarms:
Protection degree:
Delivered with:
Part No.
H x W x D:
Weight:
Battery Voltage:
Current:
Standard Fuses:
Spare Fuse:
Alarms:
Protection degree:
Delivered with:
M77020100
150 x 150 x 65mm (5.9 x 5.9 x 2.5")
1kg (2.2lbs)
gel, AGM, wet, Lithium Ion, spiral
12, 24, or 48V DC
300A continuous / 500A for 5 minutes
Yes
500 A T-Fuse (300A continuous at 40ºC)
Alarms, timers, auto start/stop for generator
Warning low voltage, warning low state of charge,
high voltage
IP21
MasterShunt, temperature sensor, MasterBus
Terminator, MasterBus cable, cable protections
for DC connections
M77020200
150 x 216 x 65mm (5.9 x 7.9 x 2.5")
1.2kg (2.6lbs)
12, 24, or 48V DC
300A continuous / 500A for 5 minutes
80, 80, 125, 160A - ANL type (see ANL fuses in
Section 8, page 22)
125A ANL type
Fuse monitoring
IP21
5 fuses, hex tool, MasterBus Terminator,
MasterBus cable, cable protections for
DC connections
Part No.
MasterBus Powering:
Power consumption:
Protection degree:
Weight:
DC OUTPUT
Connection:
Max software fuse current:
Hardware fuse current:
DC INPUT
Connections:
Maximum current:
Supply voltage:
M77020400
Yes
<2 mA at 12V / <2 mA at 24V (off board situation)
IP21
750 gr / 1.7 lbs
cable max. 4 mm²
10A per channel
15A per channel
Max. 95 mm² or directly connected to
MasterShunt or DC Distribution
100 A
8-30 V DC
MASTERVOLT
23
Mastervolt
MasterBus System
MASTERBUS SYSTEM - INTERFACES
The special MasterBus Interfaces increase the versatility of your MasterBus
network. Connect multiple components to distribute information to your
MasterBus products or connect products that require information from the
MasterBus network, such as a NMEA2000 or Modbus network, and vice versa.
MASTERBUS USB INTERFACE
Allows you to read and configure your
MasterBus system on your PC.
Part No. M77030100
MASTERBUS MODBUS INTERFACE
The MasterBus Modbus Interface can
provide all information from the ‘closed’
MasterBus network for other monitoring
and operating systems by means of the
Modbus protocol.
Part No. M77030800
NEW
MASTERBUS INVERTER INTERFACE
The MasterBus Inverter Interface
integrates the Mastervolt Mass Sine
inverter in a MasterBus network and
allows it to be operated and monitored
via MasterView or PC.
Part No. M77030700
NEW
MASTERBUS COMBI INTERFACE
This interface integrates a Mastervolt
Mass Combi in a MasterBus network and
allows it to be operated or monitored via a
MasterView panel or PC.
Part No. M77030475
NEW
MASTERBUS SERIAL INTERFACE
The MasterBus Serial Interface connects
conventional Mastervolt products to the
MasterBus. Data becomes permanently
available to allow configuration, operation
and monitoring via MasterView panels.
Part No. M77030450
NEW
MASTERBUS NMEA2000 INTERFACE
The MasterBus NMEA2000 Interface
provides the MasterBus network with
NMEA2000 information, and vice versa.
Part No. M77031800
NEW
Part No.s in Red = To Order Only
24
MASTERVOLT
All interfaces (and modules) can be installed in various ways,
from DIN rails to surface mounting. Available in ten languages:
English, Dutch, German, French, Spanish, Italian, Norwegian,
Swedish, Finnish and Danish.
Part No.
MasterBus powering:
Dimensions H x W x D:
Weight:
Protection degree:
Delivered with:
M77030100
Yes (when the PC is switched on)
66 x 78 x 32 mm / 2.6 x 3.1 x 1.3 inch
± 80g / 0.18 lbs
IP21
USB connection cable, MasterBus cable,
MasterBus Terminator, user’s manual
Part No.
MasterBus powering:
Dimensions H x W x D:
Weight:
Protection degree:
Delivered with:
M77030800 - TO ORDER ONLY
No
66 x 78 x 32 mm / 2.6 x 3.1 x 1.3 inch
± 80g / 0.18 lbs
IP21
MasterBus cable, MasterBus Terminator,
user’s manual
Part No.
MasterBus powering:
Dimensions H x W x D:
Weight:
Protection degree:
Delivered with:
M77030700
No
66 x 78 x 32 mm / 2.6 x 3.1 x 1.3 inch
± 80g / 0.18 lbs
IP21
Interface connection cable, MasterBus cable,
MasterBus Terminator, user’s manual
Part No.
MasterBus powering:
Dimensions H x W x D:
Weight:
Protection degree:
Delivered with:
M77030475
Yes
66 x 78 x 32 mm / 2.6 x 3.1 x 1.3 inch
± 80g / 0.18 lbs
IP21
Interface connection cable, MasterBus cable,
MasterBus Terminator, user’s manual
Part No.
Suitable for:
M77030450
BTM-III, Mac DC-DC converters and Magic
DC-DC Converters
MasterBus powering: No
Dimensions H x W x D: 66 x 78 x 32 mm / 2.6 x 3.1 x 1.3 inch
Weight:
± 80g / 0.18 lbs
Protection degree:
IP21
Delivered with:
Interface connection cable, MasterBus cable,
MasterBus Terminator, user’s manual
Part No.
MasterBus powering:
Dimensions H x W x D:
Weight:
Protection degree:
Delivered with:
M77031800 - TO ORDER ONLY
No
66 x 78 x 32 mm / 2.6 x 3.1 x 1.3 inch
± 100g / 0.22 lbs
IP21
NMEA connection cable, MasterBus cable,
MasterBus Terminator, user’s manual
Mastervolt
MasterBus System
MASTERBUS SYSTEM - INTERFACES
The special MasterBus Interfaces increase the versatility of your MasterBus
network. Connect multiple components to distribute information to your
MasterBus products or connect products that require information from the
MasterBus network, such as a NMEA2000 or Modbus network, and vice versa.
MASTERBUS TANK LEVEL INTERFACE
This interface converts analogue sensor
input signals to MasterBus data.
Selectable input signals: 4-20 mA,
0-300 Ω, 8-70 V DC.
Part No. M77030300
NEW
BATTERY CONTACTOR INTERFACE
This interface allows MasterBus to
control latching relays. Saves
batteries as a current is only drawn
during switching.
NEW
Part No. M77031700
MASTERBUS REPEATER
Double the maximum length of your
MasterBus network.
Part No. M77031100
NEW
AC POWER ANALYSER
The AC power analyser is a multifunctional measuring device which
can visualize the AC current and AC voltage, frequency, Cos Phi and
the power of the system. On top of that
it features the “inverter control” and a free
programmable “potential free contact”.
Part No. M77031200
All interfaces (and modules) can be installed in various ways,
from DIN rails to surface mounting. Available in ten languages:
English, Dutch, German, French, Spanish, Italian, Norwegian,
Swedish, Finnish and Danish.
Part No.
MasterBus powering:
Dimensions H x W x D:
Weight:
Protection degree:
Delivered with:
M77030300 - TO ORDER ONLY
No
66 x 78 x 32 mm / 2.6 x 3.1 x 1.3 inch
± 80g / 0.18 lbs
IP21
MasterBus cable, MasterBus Terminator,
user’s manual
Part No.
MasterBus powering:
Dimensions H x W x D:
Weight:
Protection degree:
Delivered with:
M77031700 - TO ORDER ONLY
No
66 x 78 x 32 mm / 2.6 x 3.1 x 1.3 inch
± 100g / 0.22 lbs
IP21
Cable with plug, MasterBus cable, MasterBus
Terminator, user’s manual
Part No.
MasterBus powering:
Dimensions H x W x D:
Weight:
Protection degree:
Delivered with:
M77031100 - TO ORDER ONLY
Yes
66 x 78 x 32 mm / 2.6 x 3.1 x 1.3 inch
± 90g / 0.20 lbs
IP21
MasterBus cable, MasterBus Terminator,
user’s manual
Part No.
MasterBus powering:
Dimensions H x W x D:
Weight:
Protection degree:
Delivered with:
M77031200 - TO ORDER ONLY
No
80 x 181 x 28 mm / 3.1 x 7.1 x 1.1 inch
± 530g / 1.2 lbs
IP65
MasterBus cable, MasterBus Terminator,
current transformer 100:5, user’s manual
Part No.
MasterBus powering:
Dimensions H x W x D:
Weight:
Protection degree:
Delivered with:
M77031900 - TO ORDER ONLY
Yes (when the PC is switched on)
91 x 185 x 33 mm / 3.6 x 7.3 x 1.3 inch
± 750g / 1.65 lbs
IP65
USB cable, SPC cable, MasterBus cable,
MasterBus Terminator, user’s manual
NEW
SYSTEM PANEL CONTROLLER
Connect the MasterView System or your
PC with the MasterBus network. Provides
the power and software license key for the
MasterView System panel.
Part No. M77031900
NEW
MASTERBUS INSTALLATION CABLE
Suitable for data traffic and powering peripheral
equipment, this is the only cable you need for your
MasterBus network.
MasterBus compatible products come standard with
two ports, while other equipment requires an
interface. A DIY kit is optional.
TERMINATOR
Part No. M77040000
Length
0.2m
0.5m
1m
3m
6m
10m
15m
20m
25m
Part No.
M77040020
M77040050
M77040100
M77040300
M77040600
M77041000
M77041500
M77042000
M77042500
For more electrical
products see our
Section 8 catalogue.
MASTERVOLT
25
Mastervolt
MasterBus System
MASTERBUS SYSTEM - INTERFACES
The special MasterBus Interfaces increase the versatility of your MasterBus
network. Connect multiple components to distribute information to your
MasterBus products or connect products that require information from the
MasterBus network, such as a NMEA2000 or Modbus network, and vice versa.
GPRS MODULE
The GPRS module communicates with your vessel via mobile phone,
allowing you to monitor current
information or operate the system by
remote control via a text message or
easy shortcuts. Alarm notifications per
text message are optional.
Part No. M77031000
NEW
SWITCH INPUT 3 PCB
The Switch Input 3 makes watertight
Carling switches compatible with
MasterBus.
Multiple functions can be easily linked
with this module.
Part No. M77031300
NEW
SWITCH INPUT 4 PCB
Provides LED indications for
additional information, such as
when a light stops working.
Part No. M77031400
NEW
DIGITAL INPUT
Connect up to four switches to
the MasterBus network.
Delivery includes cables.
Part No. M77030900
NEW
DIGITAL AC 1 x 6A
The Digital AC 1 x 6A switches all AC
loads up to 6A directly and higher loads
via a relay, anywhere on board.
Part No. M77031500
NEW
All interfaces (and modules) can be installed in various ways,
from DIN rails to surface mounting. Available in ten languages:
English, Dutch, German, French, Spanish, Italian, Norwegian,
Swedish, Finnish and Danish.
Part No.
MasterBus powering:
Dimensions H x W x D:
Weight:
Protection degree:
Delivered with:
Part No.
MasterBus powering:
Dimensions H x W x D:
M77031300 - TO ORDER ONLY
No
54 x 86 x 58 mm / 2 x 3.4 x 2.3 inch
(including mounting frame)
Distance between switches: 26.1mm
Weight:
35g / 0.08 lbs (incl. MasterBus Terminator)
Protection degree:
IP21
Delivered with:
MasterBus Terminator, user’s manual;
switches & mounting frame not included
Part No.
MasterBus powering:
Dimensions H x W x D:
M77031400 - TO ORDER ONLY
No
56 x 120 x 65 mm / 2.2 x 4.7 x 2.6 inch
(including mounting frame)
Distance between switches: 27.3mm
Weight:
45g / 0.1 lbs (incl. MasterBus Terminator)
Protection degree:
IP21
Delivered with:
MasterBus Terminator, user’s manual;
switches & mounting frame not included
Part No.
MasterBus powering:
Dimensions H x W x D:
Weight:
Protection degree:
Delivered with:
M77030900 - TO ORDER ONLY
No
66 x 78 x 32 mm / 2.6 x 3.1 x 1.3 inch
± 80g / 0.18 lbs
IP21
Cable with plug, MasterBus cable, MasterBus
Terminator, user’s manual
Part No.
Max. Relay Current:
MasterBus powering:
Dimensions H x W x D:
Weight:
Protection degree:
Delivered with:
M77031500 - TO ORDER ONLY
6A (230V AC single pole)
No
66 x 78 x 32 mm / 2.6 x 3.1 x 1.3 inch
± 80g / 0.18 lbs
IP21
MasterBus cable, MasterBus Terminator,
user’s manual
Part No.
Potential free contact
MasterBus powering:
Dimensions H x W x D:
Weight:
Protection degree:
Delivered with:
M77030500
NO-C-NC - 1A / 30V DC
No
66 x 78 x 32 mm / 2.6 x 3.1 x 1.3 inch
± 80g / 0.18 lbs
IP21
MasterBus cable, MasterBus Terminator,
user’s manual
Part No.s in Red = To Order Only
MULTIPURPOSE CONTACT OUTPUT
This programmable free switch contact
provides your MasterBus network with
unprecedented options, such as controlling
a ventilator in the engine room or operating
a generator from a different brand.
Part No. M77030500
26
MASTERVOLT
M77031000 - TO ORDER ONLY
No
66 x 78 x 32 mm / 2.6 x 3.1 x 1.3 inch
± 80g / 0.18 lbs
IP21
GPRS antenna, MasterBus cable,
MasterBus Terminator, user’s manual;
SIM card not included
FOR FUNCTION SWITCHES & LEGENDS
SEE PAGES 29 -30
Masterlink Battery Monitor
& Circuit Breaker Switches
BATTERY MONITOR
MASTERLINK BTM-III
MASTERLINK BTM-III BATTERY MONITOR
The Masterlink BTM-III battery monitor provides an
accurate indication of the current, amperage, remaining
time and remaining capacity of battery bank 1, and the
current and estimated capacity of battery banks 2 and 3.
The built-in microprocessor calculates the remaining
capacity and stores historic data.
Part No. M70403163
COVER BOX FOR MASTERLINK
REMOTE PANELS
(if supplied individually)
Part No. M70904610
TO ORDER ONLY.
Specifications:
Number of battery sets:
Max. Amp-hour capacity:
Voltage read-out:
Current read-out:
Amp-hours read-out:
Time remaining indication:
Battery capacity in %:
Current consumption (backlight off):
Current consumption (backlight on):
Supply voltage:
Voltage range measurement:
Voltage resolution:
Voltage deviation:
Amps measurement range:
Shunt specification:
Dimensions instrument (W x H):
Built-in depth incl./excl. cover box:
Weight instrument incl. shunt:
Dimensions shunt (H x W x D):
Service (fully), starter & bowthruster
9999 Ah
Yes
Yes
Yes
Yes
Yes
14mA / 12V - 11 mA / 24V
100mA / 12V - 50 mA / 24V
9-35V DC
7-35V DC
0.01V
± 0.6% ± 1 figure
0-500A (optional 1000 A/50 mV)
500A / 50mV (service set)
120 x 65mm / 4.7 x 2.6 inch
55/40mm - 2.2/1.6 inch
0.9kg (2lbs)
84x44x44mm (3.3x1.7x1.7 inch - M8)
For the digital battery monitor of the
future, see page 23 - MasterShunt.
CIRCUIT BREAKER SWITCHES
Mastervolt supplies a wide variety of single pole and double pole circuit breakers, they secure the electrical circuit against overload or short-circuits.
For equipment that is connected directly to the circuit breakers - such as lighting - they can also act as on/off switches. Double pole breakers are mostly used
for 230V systems, which interrupt the current both in the phase and neutral wires. Mastervolt breakers satisfy all the requirements of CE/UL/CSA and ABYC.
The CD1 series is available from 60A to
100A for both AC and DC, single pole.
The MD1 series is available
for 1 to 25A for DC circuits.
Single Pole only
MD1
Amps
1A
2.5A
5A
7.5A
10A
15A
20A
25A
Part No.
M70905201
M70905202
M70905205
M70905207
M70905210
M70905215
M70905220
M70905225
AD1
Amps
1A
2.5A
5A
7.5A
10A
15A
20A
25A
30A
35A
40A
50A
Part No.
M70905001
M70905002
M70905005
M70905007
M70905010
M70905015
M70905020
M70905025
M70905030
M70905035
M70905040
M70905050
The AD1 and AD2 series
are available from 1A to
50A for both AC and DC,
single and double pole.
AD2
Amps
5A
10A
15A
20A
30A
40A
50A
Part No.
M70905105
M70905110
M70905115
M70905120
M70905130
M70905140
M70905150
CD1
Amps
60A
70A
80A
90A
100A
Part No.
M70905260
M70905270
M70905280
M70905290
M70905299
Circuit Breaker with
finger guard
(avoids accidental
contact), single pole.
Description
10A AD1 single pole breaker
190A CD1 single pole breaker
Part No.
M70905091
M70905301
PART NO.S IN RED = TO ORDER ONLY
MASTERVOLT
27
Mastervolt MasterVision
System and Panels
MASTERVISION SYSTEM
MASTERVISION ALUMINIUM MODULE FRAME SYSTEM
If you want the convenience of an electrical panel controlling all functions
on-board, a MasterVision modular switchboard is the solution.
The Mastervision concept is like a DIY kit, where you bring together pieces
of a jigsaw in a way that suits you best. Start by mapping all the necessary onboard functions and the corresponding MasterVision Panels. These can then be
combined into one or more panels using the modular frame as a basic structure.
Mounting set/screws for frame mounting
Part No. M70904855
Set of five connector blocks to connect the
aluminium extrusions 480mm (18.9")
Part No. M70907820
Frame Type
Upper/Lower
Middle
Middle
Side
Size
360mm (14.2")
240mm (9.5")
360mm (14.2")
650mm (25.6")
Connector
blocks
Upper/Lower frames
CONNECTION BAR (x2) BUSBAR (X2)
BUSBAR (X2)
BUSBAR (X2)
Part No.
M70904812
M70904820
M70904822
M70904834
143 LABELS SHEET
To connect 5 single pole AD To connect 2 single pole AD To connect 6 double pole AD English 1 P/No. M70907910
English 2 P/No. M70907911
and MD circuit breakers
and MD circuit breakers
and MD circuit breakers
Part No. M70907830
Part No. M70907840
Part No. M70907850
To connect 3 panels
145x20 mm
Part No. M70907810
MASTERVOLT PANELS
POWER SYSTEM CONTROL PANEL (PSCP)
PSCP without generator start/stop.
With battery condition meter, but no
whisper generator control function.
Use in combination with Systemswitch.
Part No. M70400030
Model:
C-0-SC-3
(W x H): 240 x 195mm (9.4 x 7.7")
Material: 4mm Aluminium
PSCP with whisper control (pictured).
Simple installation with appropriate parts:
Systemswitch and DC distribution kit.
Use in combination with Systemswitch.
Part No. M70400040
Model:
Model C-0-SC-4
(W x H): 240 x 195mm (9.4 x 7.7")
Material: 4mm Aluminium
REMOTE MONITORING
for Mass battery charger, with GMDSS
system monitoring functions. Compatible
with MasterVision. Part No. M70400050
COMBINED REMOTE
MONITORING PANEL
with shore/ inverter/
generator power
indication.
To be used with
Systemswitch.
AC readout Volt/Amp/Hz,
AC Load 0-100%.
Suitable for all
generators.
Part No. M70400015
Model:
System
Manager/AC
(W x H): 120 x 195mm
(4.7 x 7.7")
Material: Aluminium
28
REMOTE MONITOR
for Mass & Chargemaster battery
chargers, with a regulator for
reducing shore power consumption.
Part No. M70403040
Model: C-3-RS
(W x H): 120 x 65mm (4.7 x 2.6")
Material: Aluminium
MASTERVOLT
Model: GMDSS
(W x H): 180 x 65mm (7.1 x 2.6")
Material: Aluminium
BILGE PUMP OPERATION SINGLE POLE
AND ALARM
DISTRIBUTION PANEL
For 12/24V
Part No. M70403020
Model: C-3-BC
(W x H): 120 x 65mm
(4.7 x 2.6")
Material: Aluminium
Suitable for 2 circuit breakers
Part No. M70303020
Type:
AD1 (DC)
(W x H): 120 x 65mm
(4.7 x 2.6")
Material: Aluminium
MONITORING PANEL
for Mass & Chargemaster
battery chargers
Part No. M70404100
Model: C-4-RB
(W x H): 60 x 65mm
(2.4 x 2.6")
Material: Aluminium
MANY OTHER PANELS AVAILABLE CONTACT AQUAFAX FOR DETAILS.
Mastervolt Function
Switches
SWITCHES FOR IN AND OUTDOOR USE
WATERPROOF FUNCTION SWITCHES
Mastervolt offers a wide choice of stylish waterproof operation buttons
and switches featuring descriptive symbols and are suitable for both
indoor and outdoor installation. The switches are tested for frequent
use at -40ºC to 85ºC and designed to last more than 150,000 cycles.
LED lamps are used to brighten the on/off indication and the basic
frame guarantees simple assembly and installation.
OPERATION BUTTON
This weather-resistant operation button made of polycarbonate
composite can be easily clicked on the base switch. A key for
removing the button again is also available (see below).
There are 64 symbols available (see next page).
Operation
Button
Switch
Module
Installation
Frame
Electrical
Connection
SWITCH MODULE
INSTALLATION FRAME
Fully waterproof switch
(IP66) for outdoor and
indoor installation.
Available in single or
double pole versions and
various configurations.
An LED illuminates the
function symbol of the
operation button.
The switch is inserted into a weather-resistant installation sheath. Mount into the existing
dashboard using sealant or glue or within the accompanying ready-made installation frame.
Available as single, three way, six way and click-in modular pieces.
Part No.
M70906405
M70906410
M70906415
M70906420
M70906430
M70906440
M70906450
M70906460
M70906470
M70906480
M70906485
M70906490
M70906495
M70906500
M70906425
Description
On/Off 1p no LED
On/Off 1p
On/(Off) 1p
On/Off 2p
(On)/Off 1p
(On)/Off 2p
On/On 1p
On/On 2p
On/Off/On 1p
On/Off/On 2p
On/Off/(On) 1p
On/Off/(On) 2p
(On)/Off/(On) 1p
(On)/Off/(On) 2p
Off/On/On 2p (wipes)
( ) denote momentary connection only
ELECTRICAL CONNECTION
Connection block (VCH) for
insulating and securing
the connections.
Part No. M70906320
VMS
VM3
VME
VHP
VM6
This range of handy fixing
frames relies on a simple clickin modular concept, allowing
different components to be
connected to each other. You
can link as many frames as
you wish but remember to use
two end segments.
VMM
Model Description
VMS frame for one switch
VME End piece*
VMM frame middle piece*
VM3
frame for 3 switches
VM6
frame for 6 switches
VHP
Blank Plug
* for built-in switches
Dimensions
34 x 59mm (1.3 x 2.3")
87 x 59mm (3.4 x 2.3")
166 x 59mm (6.5 x 2.3")
-
Part No.
M70906301
M70906302
M70906303
M70906304
M70906305
M70906330
EMPTY PANELS FOR FUNCTION SWITCHES
These photos illustrate how the panel could be composed with two and four waterproof switches
Model: (W x H):
Description
Material:
Part No.:
S-4-F2
60 x 65mm (2.4 x 2.6")
For 2 switches Aluminium M70604040 MasterVision
S-3-F4
120 x 65mm (4.7 x 2.6") For 4 switches Aluminium M70803040 compatible
ACTUATOR
REMOVER TOOL
Convenient key tool for
demounting the operation button
Part No. M70906310
MASTERVOLT
29
Mastervolt Control
Button with Legends
OPERATION CONTROL BUTTON WITH LEGENDS
Blank
No Light
Part No. M70906600
Part No. M70906601
Windshield
Wiper
Part No. M70906606
Bilgepump
Auto/hand
Part No. M70906607
Check
Light
Part No. M70906612
Part No. M70906613
Bilge
Blower
Windshield
Washer
Horn
Part No. M70906602
Anchor
Light
Part No. M70906608
Trimming
Operation
Part No. M70906614
Freshwater
Pump
Part No. M70906619
Part No. M70906621
Part No. M70906622
Bilge
Pump 1
Bilge
Pump 2
Bilge
Pump 3
Part No. M70906626
Part No. M70906627
Part No. M70906628
Water
Flushing
Tap
High Beam
Part No. M70906644
Part No. M70906645
Work Light
Part No. M70906649
Rotary
Beacon
Part No. M70906651
Fog Lamp
Windscreen
Heating
Part No. M70906669
Part No. M70906676
Warning
Electrical
Cables
Depth
Sounder
Part No. M70906700
Part No. M70906706
Dipped
Beam
Part No. M70906646
Air
Conditioning
Part No. M70906658
Direction
Indicator
Part No. M70906685
Anchor
Winch
Part No. M70906707
Running
Lights
Main Light
Switch
Ventilation
Fan
Part No. M70906603
Part No. M70906604
Masterswitch
Running/
Anchor
Light
Part No. M70906609
Part No. M70906610
Part No. M70906611
Speaker
Cylinder
Speed
Part No. M70906617
Part No. M70906618
Anchor
Part No. M70906615
Warm Air
Blower
Part No. M70906623
Fast
Part No. M70906629
Side
Marker
Light
Part No. M70906647
Rear
Demister
Part No. M70906659
Water
Pump
Part No. M70906689
Fuel
Part No. M70906624
Engine
Lights
Part No. M70906632
Interior
Light
Part No. M70906648
Driver Seat
Light
Part No. M70906667
Mute
Part No. M70906696
Part No. M70906605
Search
Light
Slow
Part No. M70906625
Work Lights
Part No. M70906635
Work Light
Part No. M70906616
Side
Marker
Lamps
Part No. M70906668
Rear Fog
Lamp
Part No. M70906699
Rear
Windshield
Wiper
Part No. M70906708
SWITCHBOARD WITH FUSES
Circuit distribution switch panel for equipment powered by 12 or 24V, such as navigation lighting.
6 x 15A thermal fuses with separate switches and on/off indicator light.
You can make text labels yourself via an application at www.mastervolt.com/mastervision.
Not compatible with standard MasterVision modules.
Model: Junior Part No. M75001000
30
MASTERVOLT
ADDITIONAL CONTROL BUTTONS WITH
LEGENDS AVAILABLE - PLEASE CONTACT
AQUAFAX SALES DEPT.
Mastervolt Alternators
& Regulators
ALTERNATORS & REGULATORS
ALPHA ALTERNATORS
The main engine alternator is designed
to charge the starter battery. As a result
the combination is not ideal for fast & full
charging of other batteries such as the
service or bowthruster battery. Especially
for chargeing batteries over a short time
or when a little more power is required.
M48012090
M48012130
There are two options to solve this issue:
Equip the standard alternator with an Alpha Pro charge regulator,
ensuring that the existing alternator works in accordance with the 3-step
charge technology instead of it’s standard 1-step method, and that the
batteries are charged faster within a shorter period.
Or use a powerful second Alpha alternator with Alpha Pro charge
regulator. This is specifically designed for charging service batteries, and
allows you to charge quickly and turn off your engine when you moor.
M48024075
M46020950
M48024110
• Fast & complete charging of
starter/service/bowthruster batteries.
• Power supply for all consumers.
• 12V and 24V versions.
• 75 A to 150 A charge current.
• Standard delivered with Alpha Pro
charge regulator for optimal
performance & longer-lasting batteries.
M48024150
Part No.
Model:
Type Cabinet:
Charge Current:
Alpha Pro Charge Regulator:
Charge Voltage Absorption:
Charge Voltage Float:
Cable Length Regulator/Alternator:
Pulley (double) diameter:
Belt section:
Isolated from Mass:
Direction of Revolutions:
Weight:
Dimensions:
Mounting:
M48012090
M48012130
M48024075
M46020950
M48024110
M48024150
12/90
12/130*
24/75*
24/95C
24/110
24/150
A
B
B
D
B
C
90A
130A
75A
95A
110A
150A
Standard
Standard
Standard
Standard
Standard
Standard
14.25V
14.25V
28.5V
28.5V
28.5V
28.5V
13.25V
13.25V
26.5V
26.5V
26.5V
26.5V
------------------------- 1.5m (5ft) oil resistant marine connection cable - delivered as standard ------------------------------73mm (2.9")
88mm (3.5")
88mm (3.5")
76.4mm (3")
88mm (3.5")
92mm (3.6")
2xA
2xA
2xA
2xA
2xA
2xA
Yes
Yes
Yes
Yes
Yes
Yes
2
2
2
1 (clockwise)
2
2
5.5kg (12.1lbs)
10.1kg (22.2lbs)
10.1kg (22.2lbs) 7.9kg (17.4lbs) 10.1kg (22.2lbs) 13.1kg (28.9lbs)
------------------------------------------- see www.mastervolt.com/alternators for the drawings ---------------------------------------five to six,
six o’clock
six o’clock
five past six
six o’clock
five to six,
six o’clock and
six o’clock and
five past six
five past six
Charge Regulation:
---------------------- The Alpha Pro Charge Regulator is standard with all models, see table below ------------------------* Available with multi-belt pulley (12/130 model = Part no. M48012131)
ALPHA PRO CHARGE REGULATORS
The Alpha Pro charge regulator is equipped with a microprocessor for Mastervolt’s
3-step charging method and fastening connections for the included cable to the
alternator. Also included is a telejack plug for the temperature sensor that is to be
connected to the largest and warmest battery. The charge regulator has a functional,
waterproof design (IP65) and features electronics housed inside synthetic material.
The charge voltage is automatically adjusted if there is any risk of gas formation.
Electronics permanently regulate the voltage, ensuring that the battery is always
kept in good condition.
Part No.
Model:
Charge Voltage- bulk/absorption*:
Charge Voltage-float*:
Adjustability Bulk:
Adjustability Float:
Temperature Compensation:
Absorption Time:
Cable Length regulator/alternator:
Connections plug regulator/alternator:
Cable Length Temperature Sensor:
Protection Degree:
Dimensions (H x W x D) in mm:
Dimensions (H x W x D) in inches:
Weight:
Suitable for alternator type:
TWO DIFFERENT ALPHA MODELS
• Alpha alternator kit with
connection cable.
• B-model for Bosch
alternators, delivered with
plug & play connection
M45511000
M45511200
M45511400
M45511600
Alpha Pro 12V
Alpha Pro 24V
Alpha Pro B 12V
Alpha Pro B 24V
14.25V
28.5V
14.25V
28.5V
13.25V
26.5V
13.25V
26.5V
13-15V
27-31V
13-15V
27-31V
13-13.9V
26-28.8V
13-13.9V
26-28.8V
-30mV / ºC
-60mV / ºC
-30mV / ºC
-60mV / ºC
----------------------------------- 4 hours, adjustable from 2 minutes to 4.5 hours ------------------------------------------------------------------ 1.5m (5ft), oil resistant maritime connections cable as standard --------------------------------Alpha/Mastervolt
Alpha/Mastervolt
Alpha/Bosch
Alpha/Bosch
6m (20ft)
6m (20ft)
6m (20ft)
6m (20ft)
IP65
IP65
IP65
IP65
90 x 95 x 30
90 x 95 x 30
90 x 95 x 30
90 x 95 x 30
3.5 x 3.7 x 1.2
3.5 x 3.7 x 1.2
3.5 x 3.7 x 1.2
3.5 x 3.7 x 1.2
0.4kg (0.9lbs)
0.4kg (0.9lbs)
0.4kg (0.9lbs)
0.4kg (0.9lbs)
Various
Various
Bosch
Bosch
*Voltage at 25ºC (with connected temperature sensor 14.4 / 28.8V at 20ºC). Soon to be available with Masterbus.
Part No.s in red = To Order Only
MASTERVOLT
31
Mastervolt AC Transfer
Systems
AC TRANSFER SYSTEMS
MASTERVOLT TRANSFER SYSTEMS: REGULATES 230V POWER SOURCES
The Mastervolt transfer system helps you regulate your shore, generator or inverter power and automatically selects the right power sources at
the right time. With Mastervolt you can cook and do laundry at the same time or watch TV with the airco on full blast. In addition, Mastervolt
transfer systems are suitable for every installation. Mastervolt makes onboard 230 V a breeze.
The Mastervolt Transfer System
Controls the Following:
• Switching on and selecting 230 V sources:
Shore power, inverter and generator (adjustable
to amperage of shore power, for instance 6A)
• Stable transfer to connected groups
• Prevents damaging contact between the
inverter and other 230V sources
• Fully compatible with Mastervolt systems, and
suitable for installations from other brands, other
generators and/or inverters
Part No.
INPUT
Model:
Nominal Input Voltage:
Input Voltage Range:
No. of Inputs:
No. of Outputs:
Dimensions (H x W x D) in mm:
Dimensions (H x W x D) in inches:
Weight:
VERSION
With Automatic Circuit Breakers:
Connection for Remote Control:
MasterBus Compatible:
LED indication on Cabinet:
Nominal Input Current Generator:
Nominal Input Current Shore:
Nominal Input Current Inverter:
Earth Leakage Switch:
Generator Input Switch:
Time Delay Generator Input:
OUTPUT
Nominal Current Shortbreak Output:
Nominal Current Power Output:
Nominal Current Generator Output:
Automatic Circuit Breakers:
TECHNICAL SPECIFICATIONS
Power Consumption (AC all inputs):
Power Consumption (only inverter power):
Temperature range (specified):
Temperature range (allowed):
Temperature range (storage/non operating):
Relative Humidity:
Transfer Time:
Frequency Watch:
MECHANICAL
Cable Size:
Protection Degree:
M55006010
Masterswitch 5kW
230V (50/60Hz)
200-250V AC
2
1
200 x 110 x 115
7.9 x 4.3 x 4.5
1.2kg (2.6lbs)
M55006015
Masterswitch 10kW
230V (50/60Hz)
200-250V AC
2
1
200 x 110 x 115
7.9 x 4.3 x 4.5
1.3kg (2.9lbs)
M55003500
Masterswitch 25kW
230V (50/60Hz)
200-250V AC
2
1
291 x 241 x 168
11.5 x 9.5 x 6.6
3.8kg (8.4lbs)
No
No
No
No
20A
20A
n/a
n/a
No
0-10 sec (adjustable)
No
No
No
No
40A
40A
n/a
n/a
No
0-10 sec (adjustable)
No
No
No
No
125A
125A
n/a
n/a
No
0-10 sec (adjustable)
n/a
20A
n/a
no, system dependent
n/a
40A
n/a
no, system dependent
n/a
125A
n/a
no, system dependent
7 VA
7 VA
26 VA
no no-load consumption
no no-load consumption
no no-load consumption
-5ºC to 60ºC
-5ºC to 60ºC
-5ºC to 60ºC
------------------------------ -25ºC to 70ºC (may not meet the specified tolerances) --------------------------60ºC to 80ºC
-60ºC to 80ºC
-60ºC to +80ºC
-------------------------------------- maximum 95%, non condensing -------------------------------------------------------------------------------- switch on 12-22ms / switch off 4-19ms ------------------------------------------No
No
No
0.5 - 10mm2 / AWG 20-7
IP55
0.5 - 10mm2 / AWG 20-7
IP55
* Also available in 9 kW: Part No. M55106200. Specifications identical to 7 kW, except current is 80 A.
32
MASTERVOLT
4-50mm2 / AWG 10-1/0
IP55
Mastervolt AC Transfer
Systems
AC TRANSFER SYSTEMS
Masterswitch: The Simple but Effective Solution
Systemswitch: The Complete System Solution
• Two AC inputs: inverter, shore power or generator.
• A single outlet to the AC power group
• Automatic switching
• Selectable time delay for generator stability
• Power transfer up to 25 kW, input / output from 20 to 125 Amps
• Can be combined with circuit breakers (Masterswitch Fuses)
• Functional casing.
• Three 230 V inputs: inverter, shore power and generator.
• Three or four outlets to 230 V power groups.
• Automatic switching.
• Power conduction from 4.5 kW to 16kW, input/output from 25 to 63 A.
• Information source for central energy management via the MasterBus network
• Optional automatic fuses; for larger systems this usually requires an extra casing
• Luxury C-casing or installation casing (System Manager model)
• MasterBus compatible
M55006060
Masterswitch Fuses 5kW
230V (50/60Hz)
200-250V AC
2
2
200 x 255 x 115
7.9 x 10 x 4.5
2.1kg (4.6lbs)
M55008005
Mass Systemswitch 6kW
230V (50/60Hz)
200-250V AC
3
3
340 x 261 x 144
13.4 x 10.3 x 5.7
4.4kg (9.7lbs)
M55008105
Mass Systemswitch 10kW
230V (50/60Hz)
200-250V AC
3
4
340 x 261 x 144
13.4 x 10.3 x 5.7
4.9kg (10.8lbs)
No
No
No
No
16A
16A
20A
Yes (1x)
No
0-10 sec (adjustable)
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
-------------------------- Indication voltage sources present and ‘load on inverter’ mode -------------------------------25A
40A
63A
25A
25A
40A
25A
25A
25A
No
No
No
---------------------------------- Continuous monitoring of voltage and frequency ------------------------------------------0-10 sec (adjustable)
0-10 sec (adjustable)
0-10 sec (adjustable)
6A + 6A + 6A
6A + 10A
n/a
Yes
25A
25A
n/a
No, system dependent
25A
25A
40A
No, system dependent
M55008205
Mass Systemswitch 16kW
230V (50/60Hz)
200-250V AC
3
4
340 x 261 x 144
13.4 x 10.3 x 5.7
5kg (11lbs)
25A
40A
63A
No, system dependent
7 VA
27 VA
33 VA
33VA
no no-load consumption
<1 VA
<1 VA
<1 VA
-5ºC to 60ºC
-5ºC to 60ºC
-5ºC to 60ºC
-5ºC to 60ºC
----------------------------------------------------------------- -25ºC to 70ºC (may not meet the specified tolerances) -------------------------------------------------------------60ºC to 80ºC
-60ºC to 80ºC
-60ºC to 80ºC
-60ºC to 80ºC
--------------------------------------------------------------------------------- maximum 95%, non condensing ------------------------------------------------------------------------------------------------------------------------------------------------------ switch on 12-22ms / switch off 4-19ms ---------------------------------------------------------------------No
Yes
Yes
Yes
0.5 - 10mm2 / AWG 20-7
IP55
--------------------- 0.5 - 10mm2 / AWG 20-7, remote control: 0.14-2.5mm2 / AWG 26-13 ---------------------------IP23
IP23
IP23
Part No.s in red = To Order Only
MASTERVOLT
33
Mastervolt Isolation
Transformers
ISOLATION TRANSFORMERS
MASTERVOLT ISOLATION TRANSFORMERS
You need to be careful when introducing shore power onboard, especially when the yacht is made of aluminium or steel. An incorrectly configured
system can result in electrolysis, which will slowly but surely corrode the metal components. It is also important to protect the engine, rudder,
rudderstock, propeller and thruster on composite yachts. A Mastervolt isolation transformer will help preserve your valuable boat and provide you with
the security of a correctly earthed 230V system.
Lightweight Mass GI Transformer
• Ultramodern high-frequency electronic
switch technology
• Lightweight and compact
• Integrated Soft Start function
• Connect to currents from 90 to 255 V
and from 45 to 65 Hz
• Units can be parallel coupled for
higher capacity
• Higher efficiency, limited heat
development
Part No.
Model:
INPUT
Input Voltage:
Input Frequency:
Nominal Input Current @ 230V
No Load Consumption:
Earth Leakage Protection:
OUTPUT
Output Voltage (equal to input):
Output Frequency (equal to input):
Soft Start:
Switch Off Behaviour Breaker:
Efficiency:
GENERAL
Power:
Technology:
Dimensions (H x W x D) in mm:
Dimensions (H x W x D) in inches:
Weight:
Ambient Temperature:
Switch off at:
Cooling:
Operating Humidity:
Protection Degree:
MasterBus Compatible:
Optional Remote Control:
M88000355
Mass GI 3.5
M88000705
Mass GI 7
M86050351
IVET-D 16A 3.5kVA Multi Tap
90-255V
45-65 Hz
16A
22W
No
90-255V
45-65 Hz
32A
44W
No
220-240V (110-120V adjustable)
45-65 Hz
16A
<10W
No
90-255V, ± 5%
45-65Hz
Yes
B-characteristic
>93%
90-255V, ± 5%
45-65Hz
Yes
B-characteristic
>93%
220-240V, ± 5% (110-120V adjustable)
45-65Hz
Yes
B-characteristic
>93%
3500W*
7000W
3500W
High Frequency
High Frequency
Torroidal
340 x 261 x 144
340 x 261 x 250
407 x 295 x 220
13.4 x 10.3 x 5.7
13.4 x 10.3 x 9.8
16 x 11.6 x 8.7
6kg (13.2lbs)
10kg (22lbs)
23kg (50.7lbs)
---------------------------- 0 to 40ºC, derating with 5% per ºC (40-60ºC) -----------------------------------------------80ºC
80ºC
120ºC
Variofan
Variofan
Natural cooling, forced cooling >80ºC
max 95%
max 95%
max 95%
IP23
IP23
IP23
Yes
Yes
No
Yes, MasterView Easy
Yes, MasterView Easy
No
* Up to 4 units parallel (14 kW).
MASTERVOLT AUTOMATIC TRANSFER SYSTEMS WITH SOFT START
Automatically adjusts shore power to the
onboard system.
Mastervolt supplies three automatic switching systems for
capacities of 6, 9 and 13 kW that - combined with an IVET
transformer - adjust shore power to the onboard system.
As a result a 230 V/50 Hz system can easily function with
an American or Caribbean shore connection. Do ensure
that the frequency on board (50 of 60 Hz) is the same as
the frequency of the shore current.
34
MASTERVOLT
M55010600
M55010900
M55011300
M55003300
M55003400
Mastervolt Isolation
Transformers
ISOLATION TRANSFORMERS
IVET-D Isolation Transformers
• High-quality toroidal transformer in robust casing, including circuit breaker
• Standard Soft Start for the suppression of inrush current at shore connection
• Multi-tap version for both 230 V/50 Hz and 120 V/60 Hz shore voltage
M85000250
IVET 2.5
M85000350
IVET 3.5
M85000450
IVET 4.5
IVET Heavy-duty Series
• High-quality isolation transformers without casing (for self installation)
• Optional Soft Start, in synthetic casing
• Capacities of 2.5 kW to 22 kW
M85000600
IVET 6
M85000800
IVET 8
M85001000
IVET 10
M85001300
IVET 13
--------------------------------------------------------------------------------------- 110/220/240V (adjustable) -------------------------------------------------------------------------------------------45-65 Hz
45-65 Hz
45-65 Hz
45-65 Hz
45-65 Hz
45-65 Hz
45-65 Hz
16A
16A
16A
26A
35A
44A
57A
<10W
<10W
<10W
<10W
<10W
<10W
<10W
No
No
No
No
No
No
No
110/220/240V, ± 5%
45-65Hz
Option
n/a
96%
110/220/240V, ± 5%
45-65Hz
Option
n/a
96.5%
110/220/240V, ± 5%
45-65Hz
Option
n/a
97%
110/220/240V, ± 5%
45-65Hz
Option
n/a
>93%
110/220/240V, ± 5%
45-65Hz
Option
n/a
>93%
110/220/240V, ± 5%
45-65Hz
Option
n/a
>93%
110/220/240V, ± 5%
45-65Hz
Option
n/a
>93%
2500W
3500W
4500W
6000W
8000W
10kW
13kW
E-core
E-core
E-core
E-core
E-core
E-core
E-core
330 x 200 x 160
330 x 200 x 185
330 x 240 x 185
380 x 240 x 215
430 x 280 x 210
430 x 280 x 240
490 x 320 x 230
13 x 7.8 x 6.2
13 x 7.8 x 7.3
13 x 9.4 x 7.3
15 x 9.5 x 8.5
16.9 x 11 x 8.3
16.9 x 11 x 9.5
19.3 x 12.6 x 9
22kg (48.5lbs)
30kg (66lbs)
35kg (77lbs)
50kg (110.2lbs)
59kg (130lbs)
75kg (165.4lbs)
90kg (198.4lbs)
--------------------------------------------------------------------- 0 - 40ºC, derating with 5% per ºC (40-60ºC) -------------------------------------------------------------------------------------n/a
n/a
n/a
n/a
n/a
n/a
n/a
Natural cooling
Natural cooling
Natural cooling
Natural cooling
Natural cooling
Natural cooling
Natural cooling
max 95%
max 95%
max 95%
max 95%
max 95%
max 95%
max 95%
IP00
IP00
IP00
IP00
IP00
IP00
IP00
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Transfer systems with Soft Start and automatic detection of input voltage
Model:
Part No.:
Voltage:
Power:
Max. input current:
Dimensions,
H x W x D:
Weight:
6kVA
M55010600
120/230V
6kW
60A at 120V - 30A at 230V
400 x 300 x 210mm
15.7 x 11.8 x 8.3''
12kg (26.5lbs)
9kVA
M55010900
120/230V
9kW
80A at 120V - 40A at 230V
400 x 300 x 210mm
15.7 x 11.8 x 8.3''
12.5kg (27.6lbs)
13kVA
M55011300
120/230V
13kW
130A at 120V - 70A at 230V
400 x 300 x 210mm
15.7 x 11.8 x 8.3''
13kg (28.7lbs)
Soft Start 13kVA
Soft Start 22kVA
M55003300
M55003400
230V
230V
2.5-13kW
13-22kW
n/a
n/a
------------ 200 x 180 x 115mm ------------------------------ 7.9 x 7.1 x 4.5'' ----------------1.2kg (2.6lbs)
1.5kg (3.3lbs)
Part No.s in red = To Order Only
MASTERVOLT
35
Mastervolt Electric
Propulsion
ELECTRIC PROPULSION
THE NEW SAILING - ELECTRIC PROPULSION
Electric sailing is becoming increasingly popular, mainly because it is quiet, peaceful and comfortable thanks to the absence of engine vibrations and noise.
It also meets the desire to be eco-friendly, and you can only enter the world’s so-called ‘green zones’ with silent and emission-free e-propulsion.
PODMASTER
Mastervolt’s ideal solution for motor or sailyachts is installed under the hull to save space and
minimise sound and vibrations. Enjoy the sound of silence with one of the 12 available PodMasters,
ranging from 2 to 10 kW, including seven steerable models and two heavy-duty versions for
professional applications.
Solid Motor for Minimal Resistance
The PodMaster is made of seawater-proof aluminium and given six layers
of epoxy coating for extra protection. Its shape has been designed to
ensure minimal resistance and optimise the propeller water flow.
Depending on the model, the bulb contains an ultra-modern, sensor-free,
3-phase permanent magnet synchronised motor or a highly efficient
permanent magnet DC motor.
PodMaster
The motor, bearings and plugs were designed for professional use and
guarantee years of sailing enjoyment and minimum maintenance. Every
PodMaster model is equipped with a propeller that is carefully attuned to
the motor to ensure maximum efficiency. The shaft and tail fin were
develop to minimise resistance and can be used as rudder for the
steerable PodMaster models. To allow installation or use in limited drafts,
the PodMaster can be fitted with a stainless steel anti-cavitation plate. Its
high capacity and exceptional efficiency ensure that virtually the entire
capacity is transferred to the propeller.
DRIVEMASTER 10 ULTRA
Charger
ChargeMaster 24/30-3
PodMaster Professional
PodMaster Steerable
Battery is customer &
application specific MLI 24/160
Display
MasterView
Easy
Joystick
Controller
Battery Safety
Cutout Ready
Mainswitch
Shunt
DC 500
Earth Leakage
Switch
Shore
Connector
BCI
DC Master 48/12-9A
12V DC Panel
DriveMaster 10 Ultra
For more Electric Propulsion products contact your local Aquafax sales representative.
36
MASTERVOLT
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement