Raymarine iTC5 Owner Manual

Add to My manuals
44 Pages

advertisement

Raymarine iTC5 Owner Manual | Manualzz

iTC-5

iTC -5

Ins ta lla tion ins tructions

ENGLIS H

Docume nt numbe r: 87138-3

Da te : 03-2012

Trademark and patents notice

Autohelm, hsb 2 , RayTech Navigator, Sail Pilot, SeaTalk, SeaTalk NG , SeaTalk HS and Sportpilot are registered trademarks of Raymarine

UK Limited. RayTalk, Seahawk, Smartpilot, Pathfinder and Raymarine are registered trademarks of Raymarine Holdings Limited.

FLIR is a registered trademark of FLIR Systems, Inc. and/or its subsidiaries.

All other trademarks, trade names, or company names referenced herein are used for identification only and are the property of their respective owners.

This product is protected by patents, design patents, patents pending, or design patents pending.

Fair Use Statement

You may print no more than three copies of this manual for your own use. You may not make any further copies or distribute or use the manual in any other way including without limitation exploiting the manual commercially or giving or selling copies to third parties.

Software updates

Check the website www.raymarine.com

for the latest software releases for your product.

Product handbooks

The latest versions of all English and translated handbooks are available to download in PDF format from the website www.raymarine.com

.

Please check the website to ensure you have the latest handbooks.

Copyright ©2012 Raymarine UK Ltd. All rights reserved.

ENGLISH

Document number: 87138-3

Date: 03-2012

Contents

Chapter 1 Important information............................. 7

Safety notices................................................................. 7

Chapter 2 Planning the installation ........................ 9

2.1 About the iTC-5 Converter ......................................... 10

2.2 Handbook information ............................................... 11

2.3 System examples...................................................... 11

2.4 Pack contents ........................................................... 15

2.5 Tools required ........................................................... 16

5.6 Technical specification............................................... 34

5.7 NMEA2000 sentences............................................... 35

Chapter 6 Options and accessories ....................... 37

6.1 Spares ..................................................................... 38

6.2 SeaTalk ng cables and accessories .............................. 38

Chapter 3 Cables and connections......................... 17

3.1 General cabling guidance .......................................... 18

3.2 Converter connections............................................... 19

Chapter 4 Location and mounting .......................... 25

4.1 Unit dimensions ........................................................ 26

4.2 Mounting .................................................................. 26

4.3 Removing the front cover........................................... 28

Chapter 5 System checks and troubleshooting .............................................................................. 29

5.1 Serial number location............................................... 30

5.2 Typical system checks............................................... 30

5.3 iTC-5 LED Status indicators ....................................... 31

5.4 System data troubleshooting...................................... 33

5.5 Raymarine customer support ..................................... 34

5

6 iTC-5

Chapter 1: Important information

Safety notices

Warning: Switch off power supply

Ensure the vessel’s power supply is switched OFF before starting to install this product. Do NOT connect or disconnect equipment with the power switched on, unless instructed in this document.

Warning: Exposed wires

With the cover open the exposed transducer wires provide a potential for electric shock.

Warning: Potential ignition source

This product is NOT approved for use in hazardous/flammable atmospheres. Do NOT install in a hazardous/flammable atmosphere (such as in an engine room or near fuel tanks).

Warning: Product installation and operation

This product must be installed and operated in accordance with the instructions provided. Failure to do so could result in personal injury, damage to your vessel and/or poor product performance.

Important information

Caution: Power supply protection

When installing this product ensure the power source is adequately protected by means of a suitably-rated fuse or automatic circuit breaker.

Caution: Service and maintenance

This product contains no user serviceable components. Please refer all maintenance and repair to authorized Raymarine dealers. Unauthorized repair may affect your warranty.

Declaration of conformity

Raymarine Ltd. declares that this product is compliant with the essential requirements of EMC directive 2004/108/EC.

The original Declaration of Conformity certificate may be viewed on the relevant product page at www.raymarine.com

.

EMC installation guidelines

Raymarine equipment and accessories conform to the appropriate

Electromagnetic Compatibility (EMC) regulations, to minimize electromagnetic interference between equipment and minimize the effect such interference could have on the performance of your system

Correct installation is required to ensure that EMC performance is not compromised.

For optimum EMC performance we recommend that wherever possible:

• Raymarine equipment and cables connected to it are:

– At least 1 m (3 ft) from any equipment transmitting or cables carrying radio signals e.g. VHF radios, cables and antennas.

7

In the case of SSB radios, the distance should be increased to 7 ft (2 m).

– More than 2 m (7 ft) from the path of a radar beam. A radar beam can normally be assumed to spread 20 degrees above and below the radiating element.

• The product is supplied from a separate battery from that used for engine start. This is important to prevent erratic behavior and data loss which can occur if the engine start does not have a separate battery.

• Raymarine specified cables are used.

• Cables are not cut or extended, unless doing so is detailed in the installation manual.

Note: Where constraints on the installation prevent any of

the above recommendations, always ensure the maximum possible separation between different items of electrical equipment, to provide the best conditions for EMC performance throughout the installation

Product disposal

Dispose of this product in accordance with the WEEE Directive.

contain. In addition, our policy of continuous product improvement may change specifications without notice. As a result, Raymarine cannot accept liability for any differences between the product and this document. Please check the Raymarine website

( www.raymarine.com

) to ensure you have the most up-to-date version(s) of the documentation for your product.

Warranty registration

To register your Raymarine product ownership, please visit www.raymarine.com

and register online.

It is important that you register your product to receive full warranty benefits. Your unit package includes a bar code label indicating the serial number of the unit. You will need this serial number when registering your product online. You should retain the label for future reference.

The Waste Electrical and Electronic Equipment (WEEE)

Directive requires the recycling of waste electrical and electronic equipment. Whilst the WEEE Directive does not apply to some

Raymarine products, we support its policy and ask you to be aware of how to dispose of this product.

8

Technical accuracy

To the best of our knowledge, the information in this document was correct at the time it was produced. However, Raymarine cannot accept liability for any inaccuracies or omissions it may iTC-5

Chapter 2: Planning the installation

Chapter contents

• 2.1 About the iTC-5 Converter on page 10

• 2.2 Handbook information on page 11

• 2.3 System examples on page 11

• 2.4 Pack contents on page 15

• 2.5 Tools required on page 16

Planning the installation

9

2.1 About the iTC-5 Converter

The iTC-5 converter allows connection of a range of compatible analogue transducers directly to the SeaTalk ng network.

• AWA — Apparent wind angle

• AWS — Apparent wind speed

• Depth

• STW — Speed through water

• Log distance

• Trip distance

• Sea temperature

• Rudder angle

• Vessel Heading

Supported transducers and data types

The following transducer types are supported by the converter:

• Instrument depth

• Instrument speed and sea temperature

• Raymarine Wind or rotavecta

• Rudder reference

• Fluxgate compass

Note: If there is a fishfinder in the system ensure that it does not operate at the same frequency as the instrument depth transducer.

Supported data types are as follows:

10

D 12026-1 iTC-5

2.2 Handbook information

This handbook describes how to include the iTC-5 converter within a SeaTalk ng network, and connect compatible transducers.

iTC-5 handbooks

Description

Instrument transducer converter iTC-5

Installation instructions

Part number

87138

Additional handbooks

You may also need the additional information included in the

SeaTalk ng reference manual. In particular for assistance with:

• constructing the SeaTalk ng network and backbone,

• connecting power, and

• LEN loading calculations.

Description

SeaTalk ng reference manual

Part number

81300

2.3 System examples

The iTC-5 converter can be connected into a SeaTalk ng network, compatible transducers can then be connected directly to the converter.

Basic SeaTalk ng system example

2

1

12 V

Planning the installation

6

7

8

9

D12033-1

11

4.

5.

6.

7.

8.

9.

2.

3.

Item

1.

Description

ST70 Instrument display.

2 x i70 Instrument displays.

Terminated SeaTalk ng T-piece connector

Terminated iTC-5

Rudder reference transducer

Depth transducer

Fluxgate compass

Raymarine wind transducer or rotavecta

Speed and sea temperature transducer

12 iTC-5

Extended SeaTalk ng system example

1 2 3

S ta tus

A IS 650 Cla s s B Tra ns ce ive r

P WR/Da ta S T ng GP S ANT VHF ANT

14

15

10

16

S e a Ta lk

11

17

7

S e a Ta lk ng

12

18

SMARTPILOT

1 2 V

13

19

8 9

D12131-1

Planning the installation

13

11.

12.

13.

14.

8.

9.

10.

3.

4.

5.

6.

7.

Item

1.

2.

15.

16.

17.

18.

19.

Description

ST70 Instrument display p70r Pilot Controller i70 Instrument display

AIS transceiver

SPX course computer (supplying 12 V power to SeaTalk ng network.)

Man over board (MOB)

SeaTalk ng 5–way connector

Rudder reference transducer (connected via SPX)

Fluxgate compass (connected via SPX)

Multi-Function display with built in GPS

SeaTalk to SeaTalk ng converter iTC-5

Terminated iTC-5

Trim tabs

Engine data (connected via devicenet adaptor)

Terminated SeaTalk ng 5–way connector

Depth transducer

Speed and sea temperature transducer

Raymarine wind transducer or rotavecta

Note: In a SPX autopilot system the fluxgate compass and rudder reference transducer must be connected directly to the course computer and not via the iTC-5.

14 iTC-5

Seatalk

ng

SeaTalk ng (Next Generation) is an enhanced protocol for connection of compatible marine instruments and equipment. It replaces the older SeaTalk and SeaTalk 2 protocols.

SeaTalk ng utilizes a single backbone to which compatible instruments connect using a spur. Data and power are carried within the backbone. Devices that have a low draw can be powered from the network, although high current equipment will need to have a separate power connection.

SeaTalk ng is a proprietary extension to NMEA 2000 and the proven

CAN bus technology. Compatible NMEA 2000 and SeaTalk /

SeaTalk 2 devices can also be connected using the appropriate interfaces or adaptor cables as required.

2.4 Pack contents

The iTC-5 converter pack comes with the following items:

1

4

2 3

Item

1.

2.

3.

4.

D12132-2

Description

iTC-5

Fixing screws x 2

Document pack includes:

• Installation instructions

• Warranty registration card

• Multilingual CD

400mm SeaTalk ng spur cable (A06038)

Planning the installation

15

2.5 Tools required

Tools required for installation

1

2

2.

3.

Item

1.

3

Description

Power Drill

Pozidrive screwdriver

3.2 mm (1/8”) drill bit

D12087-1

16 iTC-5

Chapter 3: Cables and connections

Chapter contents

• 3.1 General cabling guidance on page 18

• 3.2 Converter connections on page 19

Cables and connections 17

3.1 General cabling guidance

Cable types and length

It is important to use cables of the appropriate type and length

• Unless otherwise stated use only standard cables of the correct type, supplied by Raymarine.

• Ensure that any non-Raymarine cables are of the correct quality and gauge. For example, longer power cable runs may require larger wire gauges to minimize voltage drop along the run.

• Do NOT run cables near to engines or fluorescent lights.

Always route data cables as far away as possible from:

• other equipment and cables,

• high current carrying ac and dc power lines,

• antennae.

Strain relief

Ensure adequate strain relief is provided. Protect connectors from strain and ensure they will not pull out under extreme sea conditions.

Routing cables

Cables must be routed correctly, to maximize performance and prolong cable life.

• Do NOT bend cables excessively. Wherever possible, ensure a minimum bend diameter of 200 mm (8 in) / minimum bend radius of 100 mm (4 in).

200 mm (8 in)

100 mm (4 in)

Circuit isolation

Appropriate circuit isolation is required for installations using both

AC and DC current:

• Always use isolating transformers or a separate power-inverter to run PC’s, processors, displays and other sensitive electronic instruments or devices.

• Always use an isolating transformer with Weather FAX audio cables.

• Always use an isolated power supply when using a 3rd party audio amplifier.

• Always use an RS232/NMEA converter with optical isolation on the signal lines.

• Always make sure that PC’s or other sensitive electronic devices have a dedicated power circuit.

• Protect all cables from physical damage and exposure to heat.

Use trunking or conduit where possible. Do NOT run cables through bilges or doorways, or close to moving or hot objects.

• Secure cables in place using tie-wraps or lacing twine. Coil any extra cable and tie it out of the way.

• Where a cable passes through an exposed bulkhead or deckhead, use a suitable watertight feed-through.

Cable shielding

Ensure that all data cables are properly shielded that the cable shielding is intact (e.g. hasn’t been scraped off by being squeezed through a tight area).

18 iTC-5

3.2 Converter connections

The converter connects in line as part of the SeaTalk ng backbone. It provides connections to enable transducers to be installed onto the

SeaTalk ng network.

1

3

5

SPEED/TEMP

WIND

COMPASS

DEPTH

ROTA

VANE

RUDDER

2

4

SeaTalk

ng

connections

The iTC-5 converter has 2 x backbone connectors and 1 x spur connector.

SeaTalk ng backbone connectors

The backbone connectors enable the converter to be connected in line as part of the SeaTalk ng backbone.

SeaTalk ng spur connector

The spur connector enables connection of another SeaTalk ng device, or connection to a suitable 12 V dc power supply.

2.

3.

Item

1.

4.

5.

6.

7.

8.

Cables and connections

6 7 8

D12029-1

Description

Red — Speed and sea temperature transducer connection

Orange — Wind transducer and rotavecta connection

Yellow — Fluxgate compass connection

Green — Rudder reference transducer connection

Blue — Depth transducer connection

SeaTalk ng backbone connection

SeaTalk ng spur connection

SeaTalk ng backbone connection

19

1

20

2

Connecting SeaTalk ng cables

1. Rotate the locking collar on the back of the unit to the

UNLOCKED position.

2. Ensure the spur cable end connector is correctly oriented.

3. Fully insert the cable connector.

4. Rotate locking collar clockwise (2 clicks) until it snaps into the

LOCKED position.

Transducer connections

The iTC-5 allows connection of 5 transducers onto your SeaTalk ng network.

Speed and sea temperature transducer connections

D12034-2

2.

3.

Item

1.

S PEED/TEMP

W IND

COMPASS

1

ROTA

VANE

2 3 4 5

DEPTH

RUDDER

Cable color

Red

Screen

Green

Signal name

Speed V+

Speed 0V (shield)

Speed (signal)

D12036-1 iTC-5

2.

3.

Item

1.

4.

5.

Item

4.

5.

Wind connections

Cable color

White

Brown

Signal name

Temperature (signal)

Temperature 0V

Rotavecta connections

S PEED/TEMP

W IND

C OMPASS

V ANE

1 2

S PEED/TEMP

W IND

DEPTH

RUDDER

ROTA

C OMPASS

DEPTH

1 2

Yellow

RUDDER

Cable color

Red

Screen

Green

Blue

3 4 5

Item

1.

2.

Cable color

Red

Blue

D12037-1

Signal name

Wind V+

Wind 0V (shield)

Sine wind direction

Cosine wind direction

Fluxgate compass connections

SPEED/TEMP

WIND

ROTA

VANE

Anemometer (signal)

C OMPASS

DEPTH

1 2

R UDDER

3 4 5

Signal name

Rotor +

Rotor –

D12038-1

Cables and connections

D12039-1

21

3.

4.

Item

1.

2.

3.

4.

Item

1.

2.

5.

Cable color

Red

Screen

Green

Yellow

Blue

Rudder reference connections

22

S PEED/TEMP

WIND

COMPASS

1 2 3

D

4

Cable color

Screen

Red

Green

Blue

Signal name

V ref

0V (shield)

Sense B

Sense A

Drive

Depth transducer connections

SPEED/TEMP

WIND

COMPASS

R OTA

VANE

D EPTH

RUDDER

ROTA

VANE

2.

3.

Item

1.

1 2 3

Cable color

Screen

Blue

Black

Signal name

0V (shield)

Piezoceramic +

Piezoceramic –

D12035-1

R UDDER

Signal name

0V (shield)

V+

0V

Rudder (signal)

D12040-1

Warning: iTC-5 High voltage

Do not touch exposed transducer wires whilst the converter is powered on and the cover is open.

Making transducer connections

1. Ensure power supply is switched off.

2. Crimp / solder 1/8th (4mm) female spade terminals to the end of each wire on the transducer cable, ensuring no exposed wire.

3. Unscrew the cover retention screw.

4. Open the cover

5. Connect spade terminals as shown in Transducers

connections section.

iTC-5

6. Ensure spade terminals are fully pushed home and that terminals do not touch.

7. Secure cables into their runs.

8. Close the cover and retighten the cover retention screw.

9. Switch on the power supply.

Transducer cable lengths

The table below shows the cable lengths supplied with transducers.

Transducer

Speed and sea temperature

Cable length

14 m

Wind

Rotavecta

Fluxgate compass

Rudder reference

Depth

30 m / 50 m

20 m

9.1 m

9.1 m

9 m / 14 m / 20 m

Note: Do not extend transducer cable lengths.

Cables and connections 23

24 iTC-5

Chapter 4: Location and mounting

Chapter contents

• 4.1 Unit dimensions on page 26

• 4.2 Mounting on page 26

• 4.3 Removing the front cover on page 28

Location and mounting

25

4.1 Unit dimensions

iTC-5 Dimensions

C

D

Item

A

B

E

B

A

Dimension

163.5 mm (6.44 in)

151.1 mm (5.95 in)

48.85 mm (1.92 in)

44.3 mm (1.74 in)

93.1 mm (3.66 in)

D

D12134-1

4.2 Mounting

The converter is designed to be surface mounted.

Before mounting the converter ensure that you have:

• Selected a suitable location where the converter is:

– Reasonably well protected from physical damage.

– maintained in a dry condition, where there is no likelihood of the converter being splashed.

– At least 230 mm (9 in) from the compass.

– At least 500 mm (20 in) from radio equipment.

• Identified the cable connection and route that the cable will take.

Note: The unit must be mounted vertically with the connectors facing outwards.

26 iTC-5

1 2 3

10. Replace converter cover, ensuring that the transducer cables are placed into the relevant cable guides as shown below

11. Switch on power supply and check system.

Transducer cable guides

D 12041-1

1. Ensure power supply is switched off.

2. Check the selected location for the unit, a clear, flat area is required, which is safe to have screws fitted to.

3. Offer up the converter against the selected location and mark the surface through the mounting holes on the converter.

4. Drill 2 holes as marked out above.

5. Secure the screws to the mounting surface, ensuring sufficient thread remains to allow the converter to be mounted.

6. Mount the converter and slide down to secure in the mounting holes.

7. Tighten the screws to lock the converter into position.

8. Remove converter cover.

9. Connect required transducer and SeaTalk ng cables.

Location and mounting

2

3

4

5

Item

1

1

2

3

4

5

D12308-1

Description

Speed and sea temperature transducer cable guide.

Wind transducer / Rotavecta cable guide.

Fluxgate compass cable guide.

Rudder reference transducer cable guide.

Depth transducer cable guide.

27

4.3 Removing the front cover

1

2

3

4

D 12137-1

1. Unscrew the front cover retaining screw.

2. Push in the cover clip located on the right hand side.

3. Pull the right hand side of the cover away from the unit slightly.

4. Pull the left hand side of the cover away from the unit.

Cover replacement is a reversal of cover removal.

28 iTC-5

Chapter 5: System checks and troubleshooting

Chapter contents

• 5.1 Serial number location on page 30

• 5.2 Typical system checks on page 30

• 5.3 iTC-5 LED Status indicators on page 31

• 5.4 System data troubleshooting on page 33

• 5.5 Raymarine customer support on page 34

• 5.6 Technical specification on page 34

• 5.7 NMEA2000 sentences on page 35

System checks and troubleshooting

29

5.1 Serial number location

Each converter bears a unique serial number, the serial number label can be found on the top side of the converter.

E 70010xxxxxxx

D 12135-1

The serial number is required for calibration purposes and so must be retained. Spare serial number labels are provided in the box which can be placed at the users discretion.

5.2 Typical system checks

After connection of the converter it is advisable to perform checks on the converter and connected transducers.

Typical checks should include:

Check converter’s LED status. If functioning correctly the converters status LED should be on.

Check transducers calibration settings. Wind, speed and sea temperature, depth etc. Ensure that instrument data is accurate and is available at all appropriate displays and instruments.

Check transducer LED status. If transducers are not functioning correctly remove the converters front cover to access the transducers LED status indicator.

Autopilot check. Check that the autopilot operates as expected and that heading and rudder information is available at all appropriate displays and instruments.

Note: On autopilot systems the rudder reference and fluxgate compass should be connected directly to the course computer.

All checks should be performed in a safe and familiar environment and in accordance with the instructions supplied with each product.

30 iTC-5

5.3 iTC-5 LED Status indicators

The LED status indicators show the status of the connected transducers and the SeaTalk ng network.

The converter has 6 LED status indicators:

1

3

5

R OTA

VANE

2

4

2.

3.

4.

5.

6.

Item

1.

6

LED Indicator

Speed and sea temperature transducer

Wind transducer or rotavecta

Fluxgate compass

Rudder reference transducer

Depth transducer

SeaTalk ng

Warning: iTC-5 High voltage

Do not touch exposed transducer wires whilst the converter is powered on and the cover is open.

D12133-1

System checks and troubleshooting

31

iTC-5 converter LED indications

The sequence of the LED provides the user with an indication of the status of connected transducers and the connection to the SeaTalk ng network.

LED indicator LED on Slow continuous pulse Rapid continuous pulse Short intermittent pulse LED off

SeaTalk ng

Speed and sea temperature

Windvane & anemometer

Rotavecta

Compass

Rudder

Depth

Healthy

Connected

Connected

Connected

Connected

Connected

Connected

Software download

Vessel speed pulse time-out

Wind speed pulse time-out

Searching for lock

Viewing the LED status indicators

The SeaTalk ng LED status indicator is located on the front of the converter to the left of the SeaTalk ng connectors. In order to view the transducer LED status indicators you need to open the top cover of the converter whilst the power is switched on.

1. Remove the front cover following the steps provided in the

Removing the front cover section.

Low bus voltage

Lost valid signal

(temperature)

Lost valid signal

(windvane)

Lost valid signal

Lost valid signal

No communications / fault

Not connected

Not connected

Not connected

Not connected

Not connected

Not connected

No SeaTalk ng power

32 iTC-5

5.4 System data troubleshooting

Aspects of the installation can cause problems with the data shared between connected equipment. Such problems, their possible causes and solutions are described here.

Problem

Instrument, engine or other system data is unavailable at all displays.

Possible causes

Data is not being received at the display.

Possible solutions

Check the data bus (e.g. SeaTalk ng ) wiring and connections.

Check the overall integrity of the data bus (e.g. SeaTalk ng ) wiring.

Data source (e.g ST70 instrument or engine interface) is not operating.

If available refer to the reference guide for the data bus. (e.g. SeaTalk ng reference manual)

Check the source of the missing data (e.g. ST70 instrument or engine interface).

Check the power to the SeaTalk bus.

Refer to the manufacturer’s handbook for the equipment in question.

Contact Raymarine technical support.

Instrument or other system data is missing from some but not all displays.

Software mismatch between equipment may prevent communication.

Network problem

Software mismatch between equipment may prevent communication.

Check that all required equipment is connected to the network..

Check the status of the Raymarine network Switch.

Check that SeaTalk hs / RayNet cables are free from damage.

Contact Raymarine technical support

System checks and troubleshooting

33

5.5 Raymarine customer support

Raymarine provides a comprehensive customer support service.

You can contact customer support through the Raymarine website, telephone and email. If you are unable to resolve a problem, please use any of these facilities to obtain additional help.

Web support

Please visit the customer support area of our website at: www.raymarine.com

This contains Frequently Asked Questions, servicing information, e-mail access to the Raymarine Technical Support Department and details of worldwide Raymarine agents.

Telephone and email support

In the USA:

Tel: +1 603 324 7900

Toll Free: +1 800 539 5539

Email: [email protected]

In the UK, Europe, the Middle East, or Far East:

Tel: +44 (0)13 2924 6777

Email: [email protected]

Product information

If you need to request service, please have the following information to hand:

• Product name.

• Product identity.

• Serial number.

• Software application version.

You can obtain this product information using the menus within your product.

5.6 Technical specification

Nominal supply voltage

Operating voltage range

Current

Power consumption

LEN

(Refer to SeaTalk ng reference manual for further information).

Environmental

Data connections

Conformance

12 V dc

9 — 16 V dc

<150 mA peak operating current

Typical: 1.5 W

3

Installation environment

• Operating temperature = –15ºC to

+55ºC

• Storage temperature = –25ºC to

+70ºC

• Relative humidity: max 95%

• Splash proof to IPX2

• SeaTalk ng backbone

• 1 x SeaTalk ng spur

• 5 x transducer connections with spade terminals

• Europe: 2004/108/EC

• Australia and New Zealand: C-Tick,

Compliance Level 2

34 iTC-5

5.7 NMEA2000 sentences

The converter supports the following NMEA2000 sentences.

Protocol

NMEA2000

PGN

59904

PGN name

ISO request

Receive

Transmit

NMEA2000 59932

NMEA2000 60928

ISO acknowledge

Address claim

• •

NMEA2000 65240

NMEA2000 126464

ISO commanded address

Transmission

PGN list

NMEA2000 126464 Received

PGN list

NMEA2000 126996

NMEA2000 126208

Product information

Acknowledge group function

NMEA2000 126208 Command group function

NMEA2000 126208

NMEA2000 127245

Request group function

Rudder

System checks and troubleshooting

Protocol

NMEA2000

PGN

128259

NMEA2000

NMEA2000

NMEA2000

NMEA2000

128267

128275

130306

127250

NMEA2000 130310

NMEA2000 130312

PGN name

Speed, water referenced

Depth

Distance log

Wind data

Vessel heading

Environmental parameters

Temperature

Receive Transmit

35

36 iTC-5

Chapter 6: Options and accessories

Chapter contents

• 6.1 Spares on page 38

• 6.2 SeaTalk ng cables and accessories on page 38

Options and accessories

37

6.1 Spares

The following spares are available for your converter:

Product number

A08002

Description

Spare top cover

38

6.2 SeaTalk

ng

cables and accessories

SeaTalk ng cables and accessories for use with compatible products.

Description

Backbone Kit

Part No

A25062

Notes

Includes:

• 2 x 5 m (16.4 ft)

Backbone cable

• 1 x 20 m (65.6 ft)

Backbone cable

• 4 x T-piece

• 2 x Backbone terminator

• 1 x Power cable

A06038

SeaTalk ng 0.4 m (1.3 ft) spur

SeaTalk ng 1 m (3.3 ft) spur

SeaTalk ng 3 m (9.8 ft) spur

A06039

A06040

SeaTalk ng 5 m (16.4 ft) spur

SeaTalk ng 0.4 m (1.3 ft) backbone

SeaTalk ng 1 m (3.3 ft) backbone

SeaTalk ng 3 m (9.8 ft) backbone

A06041

A06033

A06034

A06035 iTC-5

Description

SeaTalk ng 5 m (16.4 ft) backbone

SeaTalk ng 9 m (29.5 ft) backbone

Part No

A06036

A06068

SeaTalk ng 20 m (65.6 ft) backbone

SeaTalk ng to bare ends

1 m (3.3 ft) spur

A06037

A06043

SeaTalk ng to bare ends

3 m (9.8 ft) spur

A06044

SeaTalk ng Power cable

A06049

SeaTalk ng Terminator A06031

SeaTalk ng T-piece A06028

A06064

SeaTalk ng 5–way connector

SeaTalk to SeaTalk ng converter

SeaTalk ng Inline terminator

E22158

A80001

SeaTalk ng Blanking plug A06032

Options and accessories

Notes

Provides 1 x spur connection

Provides 3 x spur connections

Allows the connection of SeaTalk devices to a

SeaTalk ng system.

Provides direct connection of a spur cable to the end of a backbone cable. No

T-piece required.

Description

SeaTalk (3 pin) to

SeaTalk ng adaptor cable

0.4 m (1.3 ft)

SeaTalk2 (5 pin) to

SeaTalk ng adaptor cable

0.4 m (1.3 ft)

DeviceNet adaptor cable

(Female)

Part No

A06047

A06048

A06045

DeviceNet adaptor cable

(Male)

A06046

DeviceNet adaptor cable

(Female) to bare ends.

E05026

DeviceNet adaptor cable

(Male) to bare ends.

E52027

Notes

Allows the connection of

NMEA 2000 devices to a SeaTalk ng system.

Allows the connection of

NMEA 2000 devices to a SeaTalk ng system.

Allows the connection of

NMEA 2000 devices to a SeaTalk ng system.

Allows the connection of

NMEA 2000 devices to a SeaTalk ng system.

39

40 iTC-5

Owner n otes:

Owner n otes:

www.ra ym a rin e .c o m

advertisement

Related manuals

Download PDF

advertisement