- Modifications
Centurion Clip, Superclip & Superclip 2 User Manual
Superclip Centurion
Latest Version of user manual & superclip updates are always
available at:- http://www.centurionclip.com
(incl. Superclip1 & Superclip2)
User Manual: Superclip/Centurion
16th Nov 2006
For Latest Update Centurion Clip:- V7.90
For Latest Update Superclip & Superclip 2:- V7.80
This Manual Assumes you have the latest update installed on your Superclip
Introduction. .....................................................................................................................................2
Superclip Updates by EMAIL. ...............................................................................................................2
Unlocking Phones, Mode Guide ............................................................................................................4
Pantec C300......................................................................................................................................5
Motorola Iden ....................................................................................................................................5
Total LG 2g Unlock .............................................................................................................................6
Benq E61 ..........................................................................................................................................7
LG 8180 8330 Unlock .........................................................................................................................7
LG 8110, 8120, 8130, 8138 Unlock .....................................................................................................7
Lobster Unlock Procedure....................................................................................................................8
NEC-3g incl. 338 V4 ...........................................................................................................................8
Sony Ericsson CID 36/37 ....................................................................................................................9
Nokia Unlock ................................................................................................................................... 10
Nokia Connector Compatibility Chart, ................................................................................................. 11
Sony-Ericsson (firmware V5.00, only)................................................................................................. 12
Samsung ........................................................................................................................................ 14
Sharp ............................................................................................................................................. 17
Panasonic ....................................................................................................................................... 19
Sendo. ........................................................................................................................................... 20
Motorola ......................................................................................................................................... 21
VK-Mobile ....................................................................................................................................... 22
Installing Superclip USB Drivers & Update Software. ............................................................................ 23
Installing The SuperClip On Your PC ................................................................................................... 26
Updating A Blank Clip ....................................................................................................................... 29
Updating A Loaded Superclip ............................................................................................................. 30
Activating Optional Updates (USA Option) ........................................................................................... 32
Page. 1
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Introduction.
Your new clip is a universal device for removing the network/SIM locks from a variety of models of mobile phones
from different networks. Your new superclip is equipped with 2 types of communication protocols, Serial and USB,
this is 1 of the first clips equipped with both.
Your Superclip will support the following phones:•
•
•
•
•
•
•
•
•
•
•
•
•
•
LG 8110, 8120, & 8130
LG-2G B2000, B2050, B2100, C2100, C2200, C3300, C3310, C3320, C3400, C1100, C1200, C1400,
C3100, F2100, F2300, F2400, G5600, G1500, G1600, G3100, G510, G5200, G5220, G5300, G5400,
G7070, G7100, L3100, L341i, L342i, W3000, W3100, W5200, W5220, W5300, W5400
Motorola T191, V60, V66, Ti280, V300, 400, 500, 525, 600, C220, V80
Nokia DCT3 & DCT4
Panasonic X60
Samsung E800, A1xx, A300, A400, A800, V200, Q200, S10x, S200, S300, N1xx, N5xx, R2xx, Txxx, C100
& SGH Series, E800, E810, D500, E720, E330, Z105, Z107, E530, E330
Sendo 3 & 5 series
Sharp GX10, GX15, GX20, GX25, GX30, TM100, TM150
Sony-Ericsson
V600i, Z1010,Z800,Z500 V800, V802SE, Z800i, Z1010i, Z1010c, Z500i, Z500a, Z500c, Z600 and Z608
F500i, K500i, K500c, K506c, K508i, K508c, K700i and K700c
S700i, S700c and S710a
VK207i
NEC-3g. 228, 338, 313, 616, 616v (338 v4 support on firmware v5.60 with lg/se option activated)
•
Newgen C800
•
NEC 338 V4
•
Lobster unlock, 485, 575, 544
•
Total LG Unlock, incl KG800 chocolate Clip
•
LG-3g Total unlock
•
8110, 8120, 8130, 8138, 8180, 8330, 8360, 8380
•
Sony-Ericsson, CID 36/37 unlock
•
Total LG2g
With USA Update V7.20 Optional Update Activated these phones are supported
•
•
•
PANTECH C300 (all versions) G700, PG1500, PG3200 not tested
Motorola Iden
Total LG2g (incl. USA Variants)
.
Superclip Updates by EMAIL.
You can now subscribe to our “Superclip Bulletin Service”, by registering your email address, you will receive
updates direct to your mail box as soon as they are released !!!
Please goto http://www.centurionclip.com/centurion_bulletins.html
We will also notify you when new user manuals are available, or
information relating to the operation of your New Superclip.
Page. 2
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Through Out This Guide Certain Terms Will Be Used To Avoid Confusion:
TARGET PHONE:
DEVICE:
ADAPTOR:
“the phone being unlocked”
“Superclip, the unlock clip”
“cable that connects the DEVICE to the Phone connectors and
to its Data Cable”
Technical Support & Help: Important Information !!!!!
Please before phoning for help or technical support check first that you have the
latest update installed on your superclip !!!!!
1. Goto http://www.superclip2.com and download the latest updates and install
them on your superclip.
2. Download the latest user manual from http://www.superclip2.com, and check
that the information you require is not in there before phoning your supplier.
Powering Your Centurion Clip
Please use a 9V PP3 Battery and the supplied cable to power your Centurion Clip
**********************************************************************************************************
Connecting Centurion Clip to Your PC Via USB
If your Centurion Clip has no software in it (lights will flash up and down randomly)
To connect your super clip to your pc:
1) Plug in 9V power
2) Plug in USB lead
3) LED 1 should be lit
**********************************************************************************************************
If your Super Clip has software in it (steady Lit LEDs)
To connect your super clip to your pc:
1) Plug in USB lead
2) Plug in 9V power within 2 seconds of plugging in the USB lead
3) LED 1 should be lit
**********************************************************************************************************
Page. 3
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Unlocking Phones, Mode Guide
Please read the specific instructions for each type of phone, it is very important to follow instructions to the
letter.
Points to remember when using your Superclip !!!
1.
2.
3.
4.
5.
6.
Always power your clip with a descent Battery, failure to do so could result in your clip failing during
unlocking.
Always make sure the target phone you are unlocking has a full charge, damage can result if the
phone fails during unlocking.
Always remove the SIM card from the phone. (unless otherwise instructed)
Never interrupt the connection between the Superclip and the target phone during unlocking, damage
to the target phone could result.
Never attempt to unlock a phone without checking the user manual for specific instructions for
that model.
Check regularly for new updates and instructions from http://www.centurionclip.com
LED Phone Mode Table
Before unlocking a phone with the superclip, you must select the correct mode, the mode of the superclip is
displayed by the state of it’s 4 LEDs, you simply press the “Select” button to change the Superclip’s mode.
NEVER ATTEMP TO UNLOCK A PHONE WITH OUT READING FULLY THE SPECIFIC INSTRUCTIONS FOR THAT MODEL !!!!
CLIP MODE
LED-1
Nokia DCT3 Unlock
Nokia DCT4 Unlock
Nokia DCT4 Security Code Reset
Sony Ericsson
Samsung A1XX, A3XX, A4XX Unlock
Samsung A800 Unlock
Samsung Q/V/SXXX, P4XX, E710 Unlock
Samsung E700, E800, SGHx600 Unlock
Samsung C100 Unlock
Samsung E720
Samsung E330
Samsung Z105, Z107
Sharp GX-1, GX-10, GX10i Unlock
Sharp GX20 Unlock
Sharp GX30 Unlock
Panasonic X60 Unlock
Sendo Unlock
LG 8110, 8120, 8130 etc. Unlock
LG-2G
Motorola P2k (V60, V66, V70 & Ti280 etc.) Unlock
Motorola V300, V400, V500, V525, V600,Sharp GX15 Unlock
Motorola V220, V80 Unlock
VK207, VK530
NEC-3g
off
off
off
off
on
on
on
on
on
blinking
off
blinking
blinking
blinking
blinking
blinking
blinking
blinking
off
blinking
blinking
blinking
blinking
blinking
(V6.50) With Optional Update Active
Benq-Siemens E61
Lobster, 485, 575, 544
Total LG:- Group 1, Group 2, Group 3
Total LG:- Group 4, Group 5
MOTOROLA IDEN
Pantech C300
LG 8180, 8330
LG 8110, 8120, 8130, 8138
NEC 338 V4 (also all other NEC 3g)
Sony Ericsson CID36/37
Blinking
On
Off
Off
Blinking
Blinking
Of
Off
Blinking
Off
Page. 4
LED-2
LED-3
LED-4
off
off
off
on
off
off
off
on
on
off
on
blinking
off
off
off
on
on
on
on
on
blinking
blinking
blinking
blinking
off
on
on
off
off
on
on
off
on
off
off
off
off
on
on
off
off
on
on
on
off
off
on
on
on
off
on
on
on
off
on
on
on
off
on
off
on
off
on
off
on
off
on
on
off
on
off
on
Blinking
Off
On
On
On
Blinking
On
On
Blinking
On
blinking
Off
On
On
On
Blinking
Off
Off
On
Off
Off
Off
Off
On
Off
On
On
On
On
On
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
USA
Optional
Update
Only
Requires
Activation
Pantec C300
Models:
Clip Firmware
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
Pantech C300, G700, PG1500, PG3200 not tested
V7.20 Centurion USA Edition
Blink, Blink, Blink, On
Powered Off
C300 Pantech
Switch on the Superclip and select Pantech
Connect up the phone. (No SIM, Battery removed)
Press “Enter” button.
Insert Battery into phone
Wait for Superclip’s LEDs to return to mode indication.
Phone unlocked.
Motorola Iden
Models:
850, i450, R9 & R8: i355, i605, i710, i530, i530, i305, i833, i835, i415, i275, i860,
i860 Woody, i860 Tattoo, i830, i830 Roxy, i730, i285, i215, i205, i305, i530, i710,
i325, i315, i600, i390, i370, i1000, i1000plus, i500plus, i700plus, i2000plus,
r750plus, iX1000, i550plus, i2000, i85s, i50sx, i55sr, i80s, i90c, i85s, i80s, i30sx,
i35s, i95cl, i60c, i90c, i88s...ect
Clip Firmware
LED Sequence:
Phone:
Connector
V7.20 Centurion USA Edition
Blink, On, On, Off
Powered Off
Motorola Iden
1.
2.
3.
4.
5.
Page. 5
Switch on the Superclip and select IDEN
Connect up the phone. (No SIM, Powered ON)
Press “Enter” button.
Wait for Superclip’s LEDs to return to mode indication.
Phone unlocked.
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Total LG 2g Unlock
Models:
Clip Firmware
LED Sequence:
Phone:
Connector
Group 1, Group 2, Group 3
V6.50 or above with optional update Activated
Off, On, On, Off
Powered Off
PS2, LG cables, 510, 7050 & KG 800
Models:
Clip Firmware
LED Sequence:
Phone:
Connector
Group 4, Group 5
V6.50 or above with optional update Activated
Off, On, On, On
Powered Off
PS2, LG cables, 510, 7050 & KG 800
LG 2g GSM phones are grouped into 5 separate groups for unlocking
Each Group as it’s stage on LG Total Unlock Mode on the Superclip
Stage Identification:- (count the stages)
•
•
Waiting for ignition:- slow alternating between 2 & 3
About to change to next stage:- Fast alternating between 2 & 3
The Clip will run through the stages when you select LG total 1 or LG Total 2 and press the enter button.
Stage 1 a
Group 1
LG-CG225
LG-F7200
LG-Cg300
LG-F1200
LG-Kg810
LG-Mg810
LG-Mg530
LG-MG155
LG-KG800
LG-KG320
LG-ME591
LG-G7120
LG-F2250
LG-F3000
LG-MG100
LG-ME500
LG-KG210
LG-KG225
LG-CE500
LG-MG105
LG-M6100
1.
2.
3.
4.
5.
6.
7.
LG-C1500
LG-MG200
LG-M6100
LG-MG105
LG-A7110
LG-A7150
LG-B2070
LG-B2150
LG-B2250
LG-C1150
LG-C1300i
LG1300i
LG-C3380
LG-L1400
LG-F9100
LG-M4410
LG-MG191
LG-P7200
LG-S5000
LG-S5200
LG-F2200
LG-G7200
LG-L1200
LG-L342i
LG-L341
LG-F2400
LG-B2100
LG-C2100
LG-C3320
LG-F2100
LG-F2300
LG-F7250
LG-C3300
LG-C3310
LG-C3400
LG-B2000
LG-B2050
LG-L5100
LG-L3100
LG-C2200
LG-L1100
LG-B1200
LG-B1300
LG-C1100
LG-C1200
LG-C1400
LG-G510
LG-G1500
LG-G1600
LG-W3000
LG-GW3100
LG-C3100
LG-G4010
LG-G4050
LG-GW5200
LG-GW5220
LG-GW5300
LG-GW5310
LG-GW5400
LG-G5500
LG-G7000
LG-G7020
LG-G7030
LG-G7050
LG-G7070
LG-G7100
LG-G7120
Stage 1b
Group 2
Stage 1c
Group 3
Stage 2a
Group 4
Stage 2b
Group 5
KG220
KG800
C1300
C2000
F7250
F9100
G4010
G7020
G4011
G4020
G4050
G5500
G7000
G7030
G7050
L1100
L1400
L5100
T5100
Ce500
LG7110
VX5200
C2000
C1500
AX5000
(usa
models)
Switch on the Superclip and select Total LG 1 or Total LG 2 (depending on model)
Connect up the phone. (No SIM, Powered OFF)
Press “Enter” button.
Wait for correct LG mode/stage for the target phone on the Superclip
Press “Power” button and hold on phone.
Wait for Superclip’s LEDs to return to mode indication.
Phone unlocked.
Factory Reset
If the phone is still locked then power on phone and enter 2945#*# select factory reset
Page. 6
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Benq E61
Models:
Clip Firmware
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
Benq-Siemens E61
V6.10 or above with optional update Activated
Blink, Blink, Blink, Off
Powered Off
PS2, 02-X2, M300 type
Switch on the Superclip and select BenQ
Connect up the phone. (No SIM, Powered OFF)
Press “Enter” button.
Press “Power” button and hold on phone.
Wait for Superclip’s LEDs to return to mode indication.
Phone unlocked.
LG 8180 8330 Unlock
Models:
Clip Firmware
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
LG 8180, 8330 all versions
V5.60 or above with optional update Activated
Off, On, Off, On
Powered Off
PS2, LG8110 Connector
Switch on the Superclip and select LG
Connect up the phone. (No SIM, Powered OFF)
Press “Enter” button.
Press “Power” button on phone.
Wait for Superclip’s LEDs to return to mode indication.
Phone unlocked.
LG 8110, 8120, 8130, 8138 Unlock
Models:
Clip Firmware
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
Page. 7
LG 8110, 8120, 8130, 8138 all versions
V5.60 or above with optional update Activated
Off, On, Off, On,
Powered Off
PS2, LG8110 Connector
Switch on the Superclip and select LG
Connect up the phone. (No SIM, Powered OFF)
Press “Enter” button.
Press “Power” button on phone.
Wait for Superclip’s LEDs to return to mode indication.
Phone unlocked.
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Lobster Unlock Procedure
Models:
Clip Firmware
LED Sequence:
Phone:
Connector
Lobster, 485, 575, 544
V6.50 or above with optional update Activated
On, Off, Off, Off
Powered Off
PS2, Lobster Connector (3 types 485, 575, 544)
Lobster phones are grouped into 2 separate groups for unlocking
Each Group as it’s stage on Lobster Unlock Mode on the Superclip
Stage identification:- (count the stages)
•
•
Waiting for ignition:- slow alternating between 2 & 3
About to change to next stage:- Fast alternating between 2 & 3
The Clip will run through the stages when you select LOBSTER and press the enter button.
Stage 1 / Group 1
485, 575
1.
2.
3.
4.
5.
Stage 2 / Group 2
544
Switch on the Superclip and select Lobster
Connect up the phone. (No SIM, Powered OFF)
Press “Enter” button.
Press “Power” button on phone.
Wait for Superclip’s LEDs to return to mode indication.
Phone unlocked.
NEC-3g incl. 338 V4
NEC-3g Unlock
Models:
LED Sequence:
Clip Firmware
Phone:
Connector
1.
2.
3.
4.
5.
6.
Page. 8
228, 338, 313, 616 & 616v (338 V4 supported)
Blinking, Blinking, On, On
V5.60 or above with optional update Activated
Powered on
PS2, GX-30 connecter
Switch the Superclip on and select NEC-3G mode
Ensure the Target phone is Powered On with no SIM
Connect to the Superclip.
Press the “Enter” button.
Wait for NEC to power down
Phone Unlocked
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Sony Ericsson CID 36/37
This is the optional SE update with V6.50 software, this update replaces all Sony-Ericsson options on the
next page, If you have not purchased this update please goto the next page for SE instructions.
Total Sony Ericsson Unlock
Update V6.50 or later must be installed on your Superclip and purchased activation, to use this option.
(use instructions on next page for SE if you have not)
•
•
•
•
Models:
LED Sequence:
Clip Firmware
Phone:
Connector
W800
K600i, K608i, K300, K300i,K500, K750i,D750, D750i
J300i/J300a/J300c, J200,J200i,J200
V600i, Z1010,Z800,Z500 V800, V802SE, Z800i, Z1010i, Z1010c, Z500i, Z500a,
Z500c, Z600 and Z608
•
F500i, K500i, K500c, K506c, K508i, K508c, K700i and K700c
•
S700i, S700c and S710a
Off, On, Off, On,
V6.50 or above with SE/LG CID36/37 option Activated
Powered Off (Fully Charged Battery)
PS2, Ericsson connector, K750 connector.
Always turn Sony Ericsson phones on before unlocking (especially K700i) new handsets are
not fully calibrated until the first time they are switched on after being flashed in the factory
(new handsets will display “please wait” and a progress bar) if you unlock the phone before
calibration is complete you will need to re-flash the phone.
Phones with older style SE connection
1.
2.
3.
4.
5.
Switch on the Superclip and select Total Sony-Ericsson
Connect up the phone. (No SIM, Powered Off)
Press the “Enter” button
Wait for Superclip’s LEDs to return to mode indication
Phone Unlocked
If LEDS 1 and 4 Flash at end of the process complete the following with out turning the phone on
1.
2.
3.
4.
5.
Remove phone battery
Select Sony-Ericsson
Press "Enter" button
Insert battery into phone
Wait for all 4 LEDs on, then wait for LED 1 before removing phone.
Phones with newer style K750 SE connection
1.
2.
3.
4.
5.
6.
Switch on the Superclip and select Total Sony-Ericsson
Connect up the phone. (No SIM, Powered Off)
Press the “Enter” button
When Superclip LEDS blink power on the phone
Wait for Superclip’s LEDs to return to mode indication
Phone Unlocked
If LEDS 1 and 4 Flash at end of the process complete the following with out turning the phone on
1.
2.
3.
4.
5.
Remove phone battery
Select Sony-Ericsson
Press "Enter" button
Insert battery into phone
Wait for all 4 LEDs on, then wait for LED 1 before removing phone.
(some may require the process twice, new phones always insert sim and allow to log
onto network before unlocking)
Tips & Tricks
You can check, the CID version on most SE phones by entering the service menu
You the following key sequence (where > means menu right, < means menu left)
>*<<*<*
(cid 49 not supported)
Page. 9
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Nokia Unlock
Unlocking Nokia DCT-3 Phones
See List Here
Models:
LED
Off, Off, Off, On
Sequence:
Powered On
Phone:
1. Switch on the Superclip and select Nokia DCT3
2. Connect the phone (no SIM powered on)
3. Press"ENTER" button.
4. Wait for Superclips LEDSto return to mode indication
5. Phone Unlocked
Note: If unlock fails switch phone on after connecting to the superclip, as soon as the phones
backlights come on press the “Enter” button on the Superclip.
Unlocking Nokia DCT-4 Phones
See List Here
Models:
LED
Off, Off, On, Off
Sequence:
Powered On
Phone:
1. Switch on the Superclip and select Nokia DCT4
2. Connect the phone (no SIM powered on)
3. Press"ENTER" button.
4. Wait for Superclips LEDSto return to mode indication
5. Phone Unlocked
Reset Security Code Nokia DCT-4 Phones
See List Here
Models:
LED
Off, Off, On, On
Sequence:
Powered On
Phone:
1. Switch on the Superclip and select Nokia DCT4 Security Code Reset
2. Connect the phone (no SIM powered on)
3. Press"ENTER" button.
4. Wait for Superclips LEDSto return to mode indication
5. Security Code Reset To Factory Default (1234)
The following phones are BB5 not DCT4 and can not be unlocked:6270, 6280, 6630, 6680, 6681, 6682, 7370, N70, N71, N90, E60, E61, E70, N80, N91, N92
Nokia DCT-3 Phones
The previous generation of Nokia Phones to those currently marketed by Nokia. This list is not
comprehensive
2100 - NAM-2
3210 - NSE-8
3310 - NHM-5
3330 - NHM-6
3390 - NPB-1
3410 - NHM-2
5110 - NSE-1
5130 - NSK-1
5190 - NSB-1
5210 - NPM-5
6150 - NSM-1
6190 - NSB-3
6210 - NPE-3
7110 - NSE-5
8210 - NSM-3
8250 - HSM-3D
8290 - NSB-7
8850 - NSM-2
8890 - NSB-6
9210 - RAE-3N
Nokia DCT-4 Phones
The latest and current generation of phones from Nokia. This list is not comprehensive.
3320 - NPC-1
3360 - NPW-1
3510 - NHM-8
Page. 10
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
3510i - RH9
5100 - NPM-6
6310i - NPL-1
6510 - NPM-9
6800 - NHL-6
7650 - NHL-2
8910 - NHM-4
7600
N-Gage-QD
3590 - NPM-8
6100 - NPL-2
6340 - RH13
6590i - NSM-9
7210 - NHL-4
8310 - NHM-7
8910i - NHM-4NX
7610
5140
3650 - NHL-8
6310 - NPE-4
6360 - NPW-2
6610 - NHL-4U
7250 - NHL-4J
8390 - NSB-8
6600N-Gage
6820
Nokia Connector Compatibility Chart,
Not all Nokia phones have a unique connector, please use the chart below, to check for compatible
connectors.
* 1100, 1100a, 1100b, 1101, 1110, 1600, 2300, 2300a, 2600
* 1220, 1260, 2220, 3320, 3360
* 2100, 3610, 5210, 8210, 8250, 8290, 8850, 8855, 8890
* 2112, 3100, 3100b, 3108, 3120, 6100, 6108
* 2280
* 2650, 2651
* 3200, 3200b, 6200, 6220, 6610, 6610i, 7210, 7250, 7250i
* 3210
* 3220, 3220b, 6020, 6020b, 6021, 7260
* 3230
* 3250
* 3300, 3300b
* 3310, 3315, 3330, 3350, 3390, 3410, 5510
* 3320
* 3510, 3510i, 3530, 3590, 3595
* 3586i
* 3600, 3650, 3660
* 5100, 5100a
* 5110, 5110i, 5130, 5190, 6110, 6130, 6150, 6190, 6210, 6250, 7110
* 5140, 5140b, 5140i
* 6030, 6030a (1100 cable works if plastic is cut down)
* 6060
* 6101, 6102
* 6111
* 6170, 6170b, 7270
* 6230, 6230b, 6230i
* 6255
* 6260
* 6310, 6310i, 6340, 6340i, 6360, 6370, 6385
* 6510, 8310
* 6600
* 6620
* 6650
* 6670, 6670b, 7610, 7610b
* 6680, 6681
* 6800, 6800a, 6810
* 6820a, 6820b
* 7200, 7200b
* 7280
* 7600
* 7650
* 7710
* 8800
* 8910, 8910i
* N-GAGE
* N-GAGE QD
The following phones are BB5 and can not be unlocked:
6270, 6280, 6630, 6680, 6681, 6682, 7370, N70, N71, N90, E60, E61, E70, N80, N91, N92
6170
7280
7710
3230
8800
6101
6111
Page. 11
Griffin/UFS/JAF type cable only available use with PS-2 to Griffin adaptor
Griffin/UFS/JAF type cable only available use with PS-2 to Griffin adaptor
Griffin/UFS/JAF type cable only available use with PS-2 to Griffin adaptor
Griffin/UFS/JAF type cable only available use with PS-2 to Griffin adaptor
Griffin/UFS/JAF type cable only available use with PS-2 to Griffin adaptor
Griffin/UFS/JAF type cable only available use with PS-2 to Griffin adaptor
Griffin/UFS/JAF type cable only available use with PS-2 to Griffin adaptor
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
6060
Griffin/UFS/JAF type cable only available use with PS-2 to Griffin adaptor
Sony-Ericsson (firmware V5.00, only)
The older Sony-Ericssons have been removed from the Superclip, how ever you can still unlock them by
installing Software V5.00 on your Superclip.
Sony Ericsson T610, T620
Models:
LED Sequence:
Phone:
Connector
T610, T620
On, Off, On, Off
Powered Off
PS2, Ericsson connector.
Switch on the Superclip and select Sony-Ericsson T610
Connect up the phone. (No SIM, Powered Off)
Press the “Enter” button
Wait for Superclip’s LEDs to return to mode indication.
Phone Unlocked
Sony Ericsson T230
Models:
LED Sequence:
Phone:
Connector
T230
On, Off, On, Off
Powered Off
PS2, Ericsson connector.
Switch on the Superclip and select Sony-Ericsson T230
Connect up the phone. (No SIM, Powered Off)
Press the “Enter” button
Wait for Superclip’s LEDs to return to mode indication.
Phone Unlocked
Sony Ericssons P900 Unlocking
Models:
LED Sequence:
Phone:
Connector
P900
Off, On, On, On
Powered Off
PS2, Ericsson connector.
Switch on the Superclip and select Sony-Ericsson P900
Connect up the phone. (No SIM, Powered Off)
Press the “Enter” button
Wait for Superclip’s LEDs to return to mode indication.
Phone Unlocked
Total Sony Ericsson Unlock
Update V3.90 or later must be installed on your Superclip to use this option.
Models:
LED Sequence:
Phone:
Connector
K500, K500i, K700, K700i, P910, T610 RSA, T630 RSA. etc.
On, Off,Off, Off
Powered Off (Fully Charged Battery)
PS2, Ericsson connector.
Switch on the Superclip and select Total Sony-Ericsson
Connect up the phone. (No SIM, Powered Off)
Press the “Enter” button
Wait for Superclip’s LEDs to return to mode indication.
Phone Unlocked
Page. 12
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Tips & Tricks
If the phone turns on shortly after pressing enter (sony-ericsson phones), remove the phones
battery connect back to the superclip, press Enter then put the battery back into the phone
Page. 13
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Samsung
Samsung E800
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
E800
On, On, Off, On
Powered Off
PS2, E700 Connector
Switch on the Superclip and select Samsung E800 (Samsung E700, E800, SGHx600 option)
Press “Enter” button.
Connect the phone and press it's power button to power on.
Phone should go into "TAT" mode
Phone Unlocked.
Samsung D500, D600 (D600e not supported)
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
D500, D600
On, On, Off, On
Powered Off
PS2, D500 Connector
Switch on the Superclip and select Samsung E800 (Samsung E700, E800, SGHx600 option)
Connect the phone.
Press “Enter” button.
Power on the phone, Phone should go into "TAT" mode
Phone Unlocked.
Samsung E810
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
E810
On, On, Off, On
Powered Off
PS2, E810 Connector
Switch on the Superclip and select Samsung E810 (Samsung E700, E800, SGHx600 option)
Connect the phone.
Press “Enter” button.
Power on the phone, Phone should go into "TAT" mode
Phone Unlocked.
Samsung E820
Models:
LED Sequence:
Phone:
Connector
E820
On, On, Off, On,
Powered Off
PS2, E700 Connector
1. Switch on the Superclip and select Samsung E820 (Samsung E700, E800, SGHx600
option)
2. Connect the phone.
3. Press “Enter” button.
4. Power on the phone, Phone should go into "TAT" mode
5. Phone Unlocked
Page. 14
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Samsung E720
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
E720
Blinking, Off, Off, Off
Powered Off
PS2, E810 Connector
Switch on the Superclip and select Samsung E810 (Samsung E700, E800, SGHx600 option)
Connect the phone.
Press “Enter” button.
Power on the phone, Phone should go into "TAT" mode
Phone Unlocked.
Samsung E7100
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
E720
On, Off, On, On
Powered Off
PS2, E700 Connector
Switch on the Superclip and select Samsung E710 (Samsung Q/V/SXXX, P4XX, E710 Unlock)
Press “Enter” button.
Connect the phone (powered on)
4 LEDS come on, to show success
Phone Unlocked.
Samsung E330 Code Reader
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
7.
8.
E330
Off, On, Off, Off
Powered Off
PS2, E700 Connector
Switch on the Superclip and select Samsung E330
Connect the phone.
Press “Enter” button.
Power on the phone, Phone should go into "TAT" mode
Codes will be read in 1 second.
The clip will then warn you the code is about to be displayed (LEDs will sequence up and
down, Knight Rider style)
All 4 LEDs will then flash the first number, there will be a 2 second gap between each number.
All 4 LEDs will remain on after the last number.
Read the unlock code from the phone using the clip. The superclip will then give you the code on the LEDs of
the clip... All 4 LEDs will blink and tell you what number. So for number 4 all 4 LEDs will blink 4 times. For
"0" LEDs will flash 10 times.
Page. 15
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Samsung S500
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
S500
On, Off, On, On
Powered On (try off if phone does not unlock)
PS2, E700 Connector
Switch on the Superclip and select Samsung E820 (Samsung Q/V/SXXX, P4XX, E710 Unlock)
Connect the phone.
Press “Enter” button.
Phone Unlocked.
Samsung A800
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
A800
On, Off, On, Off
Powered On (try off if phone does not unlock)
PS2, A300 Connector
Switch on the Superclip and select Samsung A800.
Connect the phone.
Power on the phone.
Press “Enter” button.
Phone Unlocked.
Samsung Z105, Z107 Code Reader
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
7.
Z105, Z107
Blinking, Blinking, Off, Off
Powered On
Original Z105 USB Cable
Switch on the Superclip and select Samsung Z105
Connect the phone.
Press “Enter” button.
Codes will be read in 1 second.
The clip will then warn you the code is about to be displayed (LEDs will sequence up and
down, Knight Rider style)
All 4 LEDs will then flash the first number, there will be a 2 second gap between each number.
All 4 LEDs will remain on after the last number.
Read the unlock code from the phone using the clip. The superclip will then give you the code on the LEDs of
the clip... All 4 LEDs will blink and tell you what number. So for number 4 all 4 LEDs will blink 4 times. For
"0" LEDs will flash 10 times.
Samsung E530
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
Page. 16
E530
Blinking, Off, Off, Off
Powered On
PS2, E530 Connector
Switch on the Superclip and select Samsung E530 (Samsung E720 option)
Connect the phone.
Press “Enter” button.
Phone Unlocked.
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Sharp
Sharp GX1, GX10, GX10i
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
GX1, GX10, GX10i
Blinking, Off, Off, On
Powered On
PS2, GX10 connector (do not confuse with GX20 looks the same but wired
differently)
Switch the Superclip on and select Sharp GX1, GX10
Ensure the Target phone is Powered ON.
Connect to the Superclip.
Press the “Enter” button.
Wait for Superclip’s LEDs to return to mode indication.
Phone Unlocked
Tips & Tricks
If unlock fails try waiting for phone to say “waiting for SIM card” before pressing enter button, If that fails
press enter button as soon as phone backlights come on.
Sharp GX15, GX17, GX25
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
GX15, GX17, GX25
Blinking, Blinking, Off, Off
Powered On
USB, GX15 Cable
Switch the Superclip on and select Sharp GX15
Ensure the Target phone is Powered ON
Connect to the Superclip
Press the “Enter” button
You will see “XXXX” on the target phone’s screen
After 5 seconds press 1. on the target phones keypad
Wait a further 5 seconds and press 99 on the phones keypad.
Press “Select” on the phones keypad. (Right hand button under LCD)
Wait 5 seconds and press number 3 on phones keypad. (you may have to press 1 to confirm)
Wait a further 5 seconds and press “Select” on the phones keypad (Right hand button under
LCD)
After 10 seconds the handset will display “Finished”
Wait 5 Seconds and power down the phone, using the top right button on the phones keypad,
you will have to press it 3 times.
Wait 3 seconds and power the handset back on, and then power off.
You may now disconnect the phone from the Superclip.
Tips & Tricks
Some GX-15 phones do not appear to go into diag mode (display XXXX), allow the superclip to return to
mode indication, then turn the GX15 off and back on, the phone should turn back on in Diag mode.
Sharp GX20 Unlocking
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
Page. 17
GX20
Blinking, Off, On, Off
Powered On
PS2, GX20 Connector (differant from GX10 connecter)
Switch the Superclip on and select Sharp GX20
Ensure the Target phone is Powered ON.
Connect to the Superclip.
Press the “Enter” button.
Wait for Superclip’s LEDs to return to mode indication.
Phone Unlocked
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Sharp GX30, TM100, TM150 Unlocking
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Page. 18
GX30, TM100, TM150
Blinking, Off, On, On
Powered On
PS2, GX30 Connector
Switch the Superclip on and select Sharp GX15
Ensure the Target phone is Powered ON
Connect to the Superclip
Press the “Enter” button
You will see “XXXX” on the target phone’s screen
After 5 seconds press 1. on the target phones keypad
Wait a further 5 seconds and press 99 on the phones keypad.
Press “Select” on the phones keypad. (Right hand button under LCD)
Wait 5 seconds and press number 3 on phones keypad.
Wait a further 5 seconds and press “Select” on the phones keypad (Right hand button under
LCD)
After 10 seconds the handset will display “Finished”
Wait 5 Seconds and power down the phone, using the top right button on the phones keypad,
you will have to press it 3 times.
Wait 3 seconds and power the handset back on, and then power off.
You may now disconnect the phone from the Superclip
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Panasonic
Panasonic X60 Unlock
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
7.
8.
X60,
Blinking, On, Off, Off
Powered On
Jack Plug (labelled T191)
Switch on the Superclip and select Panasonic X60
Connect the phone (Powered ON)
Press “Enter” button.
Wait for Superclips LEDs to return to mode indication.
Insert incorrect SIM Card and then power on phone. (1 the phone will not accept)
type 52824** to open service menu
Enter 00000000 (8 Zero’s) into the Network Code
Phone Unlocked
Panasonic X400 Unlock
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
Page. 19
X400,
Blinking, On, Off, Off
Powered Off
Jack Plug (labelled T191)
Switch on the Superclip and select Panasonic X60
Connect the phone (Powered Off)
Power on the phone while pressing # and * screen stays white
Press “Enter” button.
LED 2 flashes then 3 then all, and then returns to mode indication.
Phone Unlocked
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Sendo.
Sendo Unlock
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
7.
Page. 20
M550, M551
Blinking, On, Off, On
Powered On
PS2, Sendo Connectors
Switch on the Superclip and select Sendo
Insure the handset is powered OFF
Connect the handset to the Superclip
Press “Enter” button on the Superclip
Power on the handset.
Wait for all 4 Superclip’s LEDs to flash.
Phone Unlocked.
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Motorola
Motorola V Series Unlocking
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
V300, V400, V500, V525, V600
Blinking, Blinking, Off, Off
Powered On
USB Cable Motorola V-Series Connecter
Switch on the Superclip and select Motorola V Series
Connect the phone (Powered ON)
Press “Enter” button.
Wait for Superclips LEDs to reach Blink, On, On, Blink
Insert incorrect SIM Card and then power on phone. (1 the phone will not accept)
Phone unlocked
Motorola V80, V220 unlocking
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
7.
V80, V220
Blinking, Blinking, Off, On
Powered On
USB Cable (mini USB end)
Switch on the Superclip and select Motorola V80, V20
Connect the phone to the clip.
Then power on in test mode by holding down the # key and the * key at the same time then
power on phone.
On V80 it must display transfer mode to do a successful unlock.
Press the “Enter” button.
Wait for Superclip’s LEDs to reach Blink, Blink, Blink, Blink
Phone unlocked
Tips & Tricks
Some later SW version V220 require the charge to be connected before it will unlock successfully.
Page. 21
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
VK-Mobile
VK Mobile Unlock
Models:
LED Sequence:
Phone:
Connector
1.
2.
3.
4.
5.
6.
VK207, VK207i, VK530, VK570
Blinking, Blinking, On, Off
Powered On
PS2, VK207 connecter (looks like Samsung A300)
Switch the Superclip on and select VK207i
Ensure the Target phone is Powered On with foreign SIM in (one the phone does not accept).
Connect to the Superclip.
Press the “Enter” button.
Clip will flash briefly , Phone Unlocked.
Restart phone
Tips & Tricks
If LEDs 1 & 4 blink while LED 2 stays on, this indicates communication error, open up
the VK connector if Pins 1 and 2 are soldered together then cut pin 2.
Page. 22
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Installing Superclip USB Drivers & Update
Software.
Before you can update your superclip, you must first download and install the necessary
software and files on your PC, these are:1. Superclip USB drivers.
2. Superclip Update Software.
Goto the downloads page.
Click on the link to download the “Superclip USB Drivers”
When presented with the “File Download” dialogue box click on save.
Save the file to your machine, the “My Documents” folder is an ideal place, it will make the file
easy to access.
Page. 23
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Repeat the above for the “Superclip Update”
Now that we have download the install programs we need to install the SW.
Double click on “sc_usb_drivers.EXE” (the superclip USB driver installation program you just
downloaded) follow the prompts, until you see the dialogue window telling you the installation
has been successful, now click on “Finish”, you have now installed the USB drivers.
Page. 24
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Now do the same for the Superclip update, double click on “sc_updater.EXE” and follow the
same procedure, until you see the dialogue window telling you the installation has been
successful, now click on “Finish”, you have now installed the Superclip updater.
The updater SW should appear, if the updater buttons do not change when you place your
mouse over them you will need to download and install the “macromedia flash player” from
the downloads page.
Then for the correct procedure to update your clip follow the relevant set of instructions below
!
If you are connecting your superclip to your PC for the first time, see the following about
windows installing your superclip. Installing Your Superclip.
Page. 25
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Installing The SuperClip On Your PC
After the software is installed, windows will need to install your superclip as a new USB
device the first time it is connected.
When you get to the stage of connecting the clip to your PC follow this guide.
(you will only need to do this once, the first time you ever connect the superclip to your PC, or
to a new PC)
**********************************************************************************************************
Connecting Centurion Clip to Your PC Via USB
If your Centurion Clip has no software in it (lights will flash up and down randomly)
To connect your super clip to your pc:
1) Plug in 9V power
2) Plug in USB lead
3) LED 1 should be lit
**********************************************************************************************************
If your Centurion Clip has software in it (steady Lit LEDs)
To connect your super clip to your pc:
1) Plug in USB lead
2) Plug in 9V power within 2 seconds of plugging in the USB lead
3) LED 1 should be lit
**********************************************************************************************************
1. When the Superclip is connected to your PC and the enter button is pressed, windows
detects the new hardware (if this fails with Centurion clip try inserting the usb cable, then
adding the 9v power to the clip in the next 1 to 2 seconds)
2. A “New Hardware Wizard” dialogue box will appear, leave the selection “Install the software
automatically” selected, Click on Next.
Page. 26
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
3. Now windows will search for the USB drivers you installed and install the new superclip
hardware
4.When the wizard has successfully installed the new hard ware click on “Finish”.
Page. 27
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
5. Windows will confirm your Superclip has been installed and is ready for use
Page. 28
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Updating A Blank
Clip (flashing LEDs)
st
You must install USB Drivers 1 .
A blank clip has all 4 LEDs flashing in a fast sequence. Use the following sequence
for updating a Blank Clip !!!!
1. Power up the clip by pressing the “Select” button
2. Start the Updater SW (if it is not running already) on your PC.
3. Connect the superclip to your PC, using a Type A-Male to Type A-Male USB
cable.
4. All LEDs will change and LED 1 will remain on.
5. The message on the Updater SW will change from “Please Connect The
Super Clip” to “Super Clip Connected”
6. Click on the Updater Software the “Enter” button
7. The Updater SW will now update the Clip.
8. Once the clip is updated press and hold “Select” button for about 1 second to
turn the superclip off
9. Disconnect from USB cable
10. The clip is now updated
**********************************************************************************************************
Connecting Centurion Clip Via USB
If your Centurion Clip has no software in it (lights will flash up and down randomly)
To connect your super clip to your pc:
1) Plug in 9V power
2) Plug in USB lead
3) LED 1 should be lit
**********************************************************************************************************
Page. 29
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Updating A Loaded Superclip (steady lit LEDs)
This is a superclip that has already previously had an update installed.
1. Make sure you have installed the latest Superclip updater installed, you can
download this from www.superclip.co.uk
2. Power up the clip by pressing the “Select” button
3. Start the Updater SW (if it is not running already) on your PC
4. Connect the superclip to your PC, using a Type A-Male to Type A-Male USB
cable.
5. Press and hold the “select” and “enter” buttons on the superclip, LED 1,
should remain lit, LEDs 2, 3 & 4 should cycle up and down.
6. Release the buttons
7. Now press the enter button on the clip, LED 1 should now remain lit.
8. The message on the Updater SW will change from “Please Connect The
Super Clip” to “Super Clip Connected”
9. Click on the Updater Software the “Enter” button
10. The Updater SW will now update the Clip.
11. Once the clip is updated press and hold “Select” button for about 1 second to
turn the superclip off
12. Disconnect from USB cable
13. The clip is now updated
**********************************************************************************************************
Connecting Centurion Clip Via USB
If your Super Clip has software in it (steady Lit LEDs)
To connect your super clip to your pc:
1) Plug in USB lead
2) Plug in 9V power within 2 seconds of plugging in the USB lead
3) LED 1 should be lit
**********************************************************************************************************
Page. 30
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Updating The SuperClip Firmware
Some updates require the firmware in the superclip to be updated.
You will be advised if this is necessary when the update is released.
1. Install the New update.
2. Run the newly installed Updater.
3. Connect the Clip to computer with the USB A to A Cable.
4. Press enter on the clip and LED 1 should light.
5. Now Click on the enter button on the Software.
6. After the clip has updated.
THE NEXT PART IS VERY IMPORTANT AND MUST BE DONE RIGHT
THIS WILL ONLY HAPPEN ON THE FIRST UPDATE
UPDATING AGAIN WILL NOT UPDATE THE FIRMWARE AGAIN
7. Turn off the Clip by Holding the SELECT button for 1 secondthen releasing it.
8. Now Disconnect the clip from the USB Cable.
9. Once Disconnected Press the SELECT Button LED 1 Should Flash.
10. Press the SELECT Button Once more and now LED 4 Should Flash.
11. Now Press Enter. (Firmware is now Updated)
Page. 31
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
Activating Optional Updates (USA Option)
Notes about V6.10
The latest Update (v7.60 includes the USA functions but in order to use them they must be
activated)
Download and Install The latest Update For your Superclip if you have not done so already,
Install the latest update for your superclip and update the firmware if required (how to update
firmware guide here)
Activating USA unlock functions
1. Then have V4.00 updater running and the clip disconnect from the computer
2. Press the SELECT button on the clip until you see BLINK, BLINK, BLINK, ON
3. Then connect the clip to the computer and press ENTER on the clip.
4. LED 1 and 3 will now be lit.
5. Now click Enter on the software.
6. The Updater will now read the EID from the clip and display it in the updating window and
also at bottom of
7. Clip Software.
Then email the EID code at the bottom of the software (Highlighted in RED) to your supplier.
Uploading the activation file.
Your supplier will then send you an activation file, save this file into the superclip folder on
your PC
Continued on next page …………….
Page. 32
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
1. Then have the latest updater running and the clip disconnect from the computer
2. Press the SELECT button on the clip until you see BLINK, BLINK, BLINK, ON
3. Then connect the clip to the computer and press ENTER.
4. LED 1 and 3 will now be lit.
5. Now click Enter on the software and the software will now update the clip.
Clip Updated And Activated !!!
Note: You can not read the EID again once you have uploaded the activation file, this is
normal and correct !!!
Page. 33
http://www.centurionclip.com
Centurion Clip, Superclip & Superclip 2 User Manual
NEVER ATTEMP TO UNLOCK A PHONE WITH OUT READING FULLY THE SPECIFIC INSTRUCTIONS FOR THAT MODEL !!!!
CLIP MODE
LED-1
Nokia DCT3 Unlock
Nokia DCT4 Unlock
Nokia DCT4 Security Code Reset
Sony Ericsson
Samsung A1XX, A3XX, A4XX Unlock
Samsung A800 Unlock
Samsung Q/V/SXXX, P4XX, E710 Unlock
Samsung E700, E800, SGHx600 Unlock
Samsung C100 Unlock
Samsung E720
Samsung E330
Samsung Z105, Z107
Sharp GX-1, GX-10, GX10i Unlock
Sharp GX20 Unlock
Sharp GX30 Unlock
Panasonic X60 Unlock
Sendo Unlock
LG 8110, 8120, 8130 etc. Unlock
LG-2G
Motorola P2k (V60, V66, V70 & Ti280 etc.) Unlock
Motorola V300, V400, V500, V525, V600,Sharp GX15 Unlock
Motorola V220, V80 Unlock
VK207, VK530
NEC-3g
off
off
off
off
on
on
on
on
on
blinking
off
blinking
blinking
blinking
blinking
blinking
blinking
blinking
off
blinking
blinking
blinking
blinking
blinking
(V6.50) With Optional Update Active
Benq-Siemens E61
Lobster, 485, 575, 544
Total LG:- Group 1, Group 2, Group 3
Total LG:- Group 4, Group 5
MOTOROLA IDEN
Pantech C300
LG 8180, 8330
NEC 338 V4 (also all other NEC 3g)
Sony Ericsson CID36/37
Blinking
On
Off
Off
Blinking
Blinking
Of
Blinking
Off
Page. 34
LED-2
LED-3
LED-4
off
off
off
on
off
off
off
on
on
off
on
blinking
off
off
off
on
on
on
on
on
blinking
blinking
blinking
blinking
off
on
on
off
off
on
on
off
on
off
off
off
off
on
on
off
off
on
on
on
off
off
on
on
on
off
on
on
on
off
on
on
on
off
on
off
on
off
on
off
on
off
on
on
off
on
off
on
Blinking
Off
On
On
On
Blinking
On
Blinking
On
blinking
Off
On
On
On
Blinking
Off
On
Off
Off
Off
Off
On
Off
On
On
On
On
http://www.centurionclip.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement