Chinavasion CVABR-G798 Manual
Chinavasion CVABR-G798 is an advanced smart pet feeder that allows you to remotely feed your pet and monitor its well-being through your smartphone. With its wide-angle lens and built-in microphone, you can see and talk to your pet from anywhere with an internet connection. The feeder's automatic feeding feature lets you set regular feeding schedules, ensuring your pet is fed on time even when you're away. The device also features a manual feeding option, allowing you to give your pet an extra treat whenever you want.
Advertisement
Advertisement
Instruction Manual
Please carefully read this instruction manual before you start to use this device.And please kindly keep this manual for necessary check in the future.
Content
1. Regular Information········································1
Buttons and Indicators··································1
Accessory and Interface································2
2. Download and Set up the App of Device
··················
3
3. Guide for Initial Usage····································4
Sign up and Sign in the Account·······················4
Forgot Password·········································5
Connect and Bind the Device··························6
4. General Instruction for APP·······························8
Homepage················································8
Feed ······················································9
Video····················································10
Settings··················································11
More ····················································14
5.
Answers for Popular Questions in Usage·············15
1.Regular Information
Buttons and Indicators
1
3 4
1. Switch button: Press it to open the feeder cover.
2. Setting button:
1) Press the Setting butto n in a short time: It will feed a share of feed when you press once.
It is ineffective to press the buttons when the Motor rotating.
2) Hold the Setting button :The device will be reset after you hear Ding-Dong when you press the button for about 5 seconds.
3. Red indicator light
1) Light is continuously on: The device is in a work status.
2) Light is off: The device is off power.
3) Light is flickering: There is a fault with the device.
4. Green indicator light
1) Light is off
:
System is in setup status.
2)Flicker slowly (flicker once in one second): The device is waiting for connection,which means it is in AP mode.
3) Flicker quickly (flicker seven times in one second): The device is networking .
4) Light is continuously on: The device is successfully connecting to the network.
Please do not cut off the power supply and do not turn off the switch or even do not disconnect the network when the light is in quickly flicker situation.
2
1
Accessory and Interface
6
7
1. Top Cove: With transparent and visible material , you can easily check the rest quantity of food inside.
2. Mic: Record your voice.
3. Wide-angle lens:130°visible vision-angle.
4. Discharge outlet: Where food come through.
5. Bowl for holding food: Removable and with buckle-designed.
6. Power interface: Interface for power supply.
7. Battery compartment: The place to put backup battery.
8. Power switch: O means power off, — means power on.
2
8
2.Download and Set up the App of Device
Method No.1: Scan QR code
( QR code for IOS PetFun ) ( QR code for Android PetFun )
Method NO.2
: Search the PetFun in Method NO.2
: Search the PetFun in
Apple store to download and install it Google-play to download and install it.
3
3. Guide for Initial Usage
Sign up Account
1. Open PetFun App
2. Click Sign Up
Sign In Account
1. Sign in account
1) Enter your registered email and password.
2) Click Sign In .
3. Fill Information
To ensure that the mailbox can be used to prevent password loss, if lose,it can be used to retrieve the password.
For your account security, please fill in 6 or more passwords.
4. Click Submit to finish register.
3) Log in successfully, jump to binding page.
2. Authorized login
1) log in to the button you want to select.
2) Operate with the authorized login prompt.
3) Log in successfully, jump to binding page.
4
Forgot Password
1. Click Retrieve password. 5.
Click Reset password
6. Enter the new password.
For your account security,please fill in 6 or more passwords.
2. Enter your registered email.
3. Click O K.
4. Open the mailbox to get the password we sent you for password reset.
7.Reset new password successfully.
5
Connect and Binding the
Device
1.
Waiting for Connection
1) Plug in the power, and turn on the switch.
2) Waiting the green indicator light continuously on or flicker.
When the smart phone is connected to the WIFI, the
WIFI name will be automatically displayed, then enter the corresponding WIFI password and click Next .
3. Set the WIFI of the device.
1 ) iPhone :
Enter the mobile phone
WIFI settings interface, and connect the WIFI named
PETFUN_XXXXXX .After the success of the connection, double-click the phone HOME key to return to the "PetFun" program.
3) Press the Set button for a while (about 5 seconds) until u hear Ding-Dong .Click the
Next when the green indicator light is slowly flickering.
Make sure your mobile device is connected to the available WIFI network.
2. WIFI Connection
6
2) Phone with Android
System :
Click Next to enter the WIFI settings,and connect WIFI named PETFUN_XXXXXX device WIFI.After the success of the phone back to the button to return to the "PetFun" program.
4. Connected to the WIFI of device, please click Next.
5.Mobile Phone is connecting with the device.
6. Device connection is finished.
7
8
4. General Instruction for APP
Homepage
1
2
3
4
1. Pet Name: Pet name you set can be Synchronously displayed.
2. Video Window: Click to switch to video page.
3. Feed Statistics : Show feed information today, and click to switch to feed page.
4. Menu bar : Main menu directory.
9
Feed
Click Feed or Feeding Date on the homepage to enter the Feed page.
1. Automatic Feeding (Regular
Feeding)
Click AUTO on the feeding page to enter the auto feed interface,then you can set regular feeding schedule.
2) Feeding Record
You can choose existed record in the app, if there is no default records,you can take the Add Record behind as reference.
3) Feeding Time
Slide hour bar and minute bar to select the feeding time,then click OK to complete the auto feeding schedule.
You can delete existed auto feeding time by pressing the time bar for a bit long time.And only 4 peace auto feeding time can be set at most.
2. Manual Feeding
Click this button at feeding page to enter Manual Feeding interface.
Slide the bar to choose how much you want to feed,and click Start to feed your lovely pet.
1) Feeding Portion
Click Feeding Portion and you can choose which you want. Finished the setting,please click OK.
10
Video
5
1
Click the video button on the menu bar or video guide to enter the video interactive interface.
1. Camera
Click it to capture the current video screen and you can store it on your phone or
SD card.
2. Talk
Click the call button, and when the icon becomes orange, you can send voice commands to pets.
3. Monitor
You can monitor sounds around the device and hear the sounds of your pet.
4. Record
It can record the dynamic video of the pet, which will be stored on your mobile phone or SD card.
5. Photos:
Saved photos can be browsed in picture library.
6. Video:
Saved videos can be browsed in video library.
11
3
6
4
2
Settings
Click the Settings on the menu bar to enter setting interface.
4 . Recording Settings
1
)
Add new record
Steps: enter the recording management interface.
1. Pushing Switch
Select whether or not to allow APP to notify the device status (feeding status, fault) in the notification bar or pop up.
2. Share Switch
Decide if allow the share bar immediately pop up after capturing the video screen.
3. Storage Location
Select phone or SD card as the storage location for photos,videos and other date. start recording,and release it to end the recording (the longest recording last for 10s). if not satisfied, click Restart and back to step ③ OK to continue next step.
12
2 ) Delete the recording
① Recording Settings to enter the management interface. delete.
③ OK to delete it. the device.
13
5. Modify the Password
1) Click Password on the Settings to enter the interface to modify the password.
1) Picture Setting
Click Camera, and picture below will pop up. You can choose
Camera to take picture or select picture from Photo Album .
2 ) Enter original password and new password.
If the password is not in line with the password confirmation, please confirm if the new password is the same as the confirmed password.
2 ) Nickname Setting
Enter your pet name at the nickname prompt.
3 ) Way to set age and weight
Ⅰ.Click “-” or “+” .
Ⅱ.Slide this mark .
Ⅲ.Click this mark and you can put exact date directly.
4) Species
6.
Add or modify the information about the pet.
pet,if no proper one,please kindly enter the species of the pet.
5) Feature Selection
Select the appropriate features of your pet.
14
More
Click More on Menu bar.
3. Help & Feedback
If there is any questions about
PetFun products, please find our contacts showed on Help
&Feedback page. And your good idea or suggestions about our product or company are also welcomed to tell us. Your kindly support is our biggest motive power.
1. Event List
Record feed type, number of feeds, feeding time and equipment failure.
Click Edit to select what you want to delete.
2. Unbound
1
)
Click Unbound.
2 ) Please return to Device and Bound1.3
to set a new binding.
4. About
You can focus on the version number of the program,and Check for Updates will be added in this part.
5. Sign Out
If you want to change your account, you can click Exit to sign out.
15
5. Answers for Popular Questions in Usage
1. When smart phone can not connect with the device,what should we do?
1) Check if there is any failures with the smart pet feeder.
2) Check the status of power supply indicators.In normal situation,the red light is on,and green light is flicker slowly.
3) Check the signal of device WIFI.
Please search the WIFI of device named PENTFUN_XXXXXX by your smart phone.
4) Uninstall the application and reload it.
Make sure that the authorized application has access to location information and network.
Please enter the correct WIFI password to ensure that the phone always (except when it connects with the device) be connected to the external network WIFI.
Please contact customer service when the above methods can not work out.
2. When it can not reset by holding the SET button,what should we do?
Turn off the power and plug in the power again. If you can not reset, please contact customer service.
3. Sometimes the device can not work when the phone connecting with the
PETFUN_XXXXXX , how to handle this matter?
It is possible that the phone automatically connected with other WIFI,which brings interference for phone and device connection. If in this case,we can enter Phone Settings to do manual connection.
4. Why it is not smooth to feed regularly?
1 ) Check the discharge outlet, when it is blocked, the red light will flicker.
2 ) Check if the motor is blocked by pet food.
5.
When the signal of network is worse,how can we reconnect the device?
Method One: Exit the app and sign in again,then wait for the date updating.
Method Two: Switch to video interface, and wait for video refresh.
6.
Why android phone can not talk and take photos?
Please confirm that you have authorized the program to use the camera and recording.
7. Information about capacity of SD card and the storage location for image and video.
SD card support 128G, and the storage location(on SD card or phone) for image and video can be set on the phone.
8.
What kind of network does the pet feeder need?
Wireless router supports 802.11BGN protocol. It do not need a mobile phone signal, as long as you can connect to the network.
16
Warning Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
17

Public link updated
The public link to your chat has been updated.
Advertisement