dj4m handset

Add to My manuals
7 Pages

advertisement

dj4m handset | Manualzz

Audio Handset

User Manual

2

Ltd

Read this manual carefully before using the product, and keep it well for future use

1. Parts and Functions

Doorentryonline

Handset

Unlock button

2

Call button/Unlock 2nd button

33

Speaker handset curve

Side View

Key functions

Handset

Handset cord

Unlock button

Call button/Unlock 2nd button

Speaker

Pick up to communicate with the visitor

Connect receiver with handset base

Press to release the door lock

In standby mode, pick up the receiver, then press Call button to activate the inner call; (Intercom)

During calling/talking state, press Unlock 2nd button to release the second door lock (If installed)

Ltd

Receive audio from the visitor

2. Terminal Descriptions

Doorentryonline

K3

L1, L2

SWSW+ K4

K4

K3

K3

DIP2

L2 L1

L2 L1

DIP1

SW+,SW-: External door bell connection port

L1,L2: Bus line connection

K4: To change ring tone setting

K3: To change ring tone volume

DIP1(Bit1-6): To set the User Code of each handset

DIP2(Bit1-3): To set Slave Handset Address

3. Unit Mounting

1) Fix 2 screws to the wall at an appropriate height

2) Connect the system correctly

3) Attach the audio phone to the bracket

2

2

Ltd

4. Operation Instructions

Doorentryonline the second door release

Unlock button to open the

Unlock 2nd button to open

2) Inner call: (Intercom) Pick up the receiver, then press CALL button to activate the inner call, all handsets connected to the system will ring at the same time. Pick up any handset and the others will stop ringing immediately. (Note that the user code must be the same for all handsets to activate the inner call function)

3) Door Bell Call Button: An additional door bell button can be connected to the handset, so that the visitors can ring the door bell again in front of the user’s apartment

5. Setup Instructions

5.1 User Code Setting (DIP1 required)

Each apartment must have a unique identification called a User Code. The DIP1 switches are used to configure the User Code for each handset

• Bit-1-5 of DIP1 are used to create the User Code setting. The value is from 1 to 32, which have 32 different codes for 32 apartments

• Bit-6 of DIP1 is used as an end of line termination

Note: DIP1 is NOT required with the single button audio entry system

Bit state

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

User Code

Code=1

Code=2

Code=3

Code=4

Code=5

Bit state

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

User Code

Code=12

Code=13

Code=14

Code=15

Code=16

Bit state

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

Code=23

Code=24

Code=25

Code=26

Code=27

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

User Code

Code=6

Code=7

Code=8

Code=9

Code=10

Code=11

Bit state

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

User Code

Code=17

Code=18

Code=19

Code=20

Code=21

Code=22

Bit state

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

ON

1 2 3 4 5 6

User Code

Code=28

Code=29

Code=30

Code=31

Code=32

5.2 Slave Address Setting (DIP2 required)

When multi handsets are installed in one apartment, these handsets have to use the same User Code setting, and the Master/Slave mode should be set on each handset

• Bit-1-2 of DIP2 are used to set the slave address setting

5.2.1 When Bit-3 of DIP2 set to OFF, the Bit-1-2 of DIP2 are used to set the master/ slave address setting:

DIP2 state Master/Slave type

Ltd

ON

1 2 3

Master handset

ON

Slave handset 1

1 2 3

ON

Slave handset 2

1 2 3

ON

Slave handset 3

1 2 3

5.3 Ring Tone Setting

Doorentryonline

Group name

Group 1

Group 2

Group 3

Items

Door Panel

Intercom Call

Door Bell

Door Panel

Intercom Call

Door Bell

Door Panel

Intercom Call

Door Bell

Door Panel

Intercom Call

Door Bell

Tunes

DINGDONG

TELEPHONE_RING

DINGDONG

JINGLE_DELL

CARMAN

FOR_ALICE

HAPPY_BIRTHDAY

SONATINE

CONGRATULATE

DOREME

RHYTHM_OF_THE

EDELWEISS

Group 4

Ltd

Doorentryonline press K4

3) Put the receiver down to exit the settings

5.4 Ring tone Volume Setting

1) There are three kinds of ring tone volume (low-range, mid-range and high-range) to choose from

2) Pick up the receiver in standby mode and press the K3 switch to adjust the volume

Low-range Mid-range press K3

High-range press K3

3) Put the receiver down to exit the settings

6. Specification

● Power Supply:

● Power Consumption:

DC24V standby 2.1mA, working 75.9mA

● Wiring:

● Dimension:

2 wires, non-polarity

187(H) X 97(W) X 33(D) mm

Ltd

The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved.

advertisement

Related manuals

Download PDF

advertisement