KX-TDE100 & 200 User Manual
Pure IP-PBX
Operating Manual
Model No.
KX-TDE100
KX-TDE200
Thank you for purchasing a Panasonic Pure IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
KX-TDE100/KX-TDE200: PMMPR Software File Version 1.0000 or later
Document Version: 2007-06
Feature Highlights
IP Communication
This PBX supports IP communication using
a variety of IP telephones, such as the KX-NT300
series with Self Labeling and/or Bluetooth R
wireless headsets, and SIP Extensions (SIP
Hardphone/SIP Softphone).
IP Softphone
You can install a software-based telephone
(Panasonic IP Softphone) on your computer to
make and receive calls using Internet Protocol
(IP) and access PBX features without a wired
IP Proprietary Telephone.
IP Proprietary
Telephone
SIP Extension
IP Softphone
Consult your dealer
Consult your dealer
Cellular Phone Features
Wireless System
This PBX supports the use of cellular phones
with the PBX. Cellular phones can make and
receive calls as if they were registered
extensions.
This PBX optionally supports a Portable Station
(PS) system. PSs can be used in the PBX
with other wired telephones.
Consult your dealer
1.3.77 Wireless XDP Parallel Mode (Page 142)
Easy Operation
A Panasonic telephone that is equipped with
a Navigator Key/Jog Dial and a display helps
you to access desired features easily. Also, you
will be informed of the arrival of an incoming call
or a message waiting by the lamp if it is equipped.
Simplified Voice Message
You can set incoming calls to be redirected
to your message box to let callers leave voice
messages when you are unable to answer
the phone.
Hello, this
is 204. Please
leave your
message.
ENTER
Navigator Key
Jog Dial
Message/Ringer Lamp
1.1 Before Operating the Telephones (Page 18)
2
Operating Manual
1.3.63 SVM (Simplified Voice Message) (Page
117)
Phone Assistant (PA)
ACD Report Server
(KX-NCV200)
This PBX supports Voice Processing Systems
(VPS) with an ACD Report Server. In addition
to VPS features, the ACD Report Server
provides you with a variety of features, such as
monitoring, reporting, and creating performance
graphs, to manage call information efficiently.
This application allows you to use your computer
to access PBX features, providing advanced call
handling capabilities to ensure that each call is
handled efficiently.
Computer
(Client)
<Report Sample: Incoming Calls>
Jack
5
John
7
Nick
5
Consult your dealer
Computer
(PA Server)
Computer
(Client)
Consult your dealer
Call Center
This PBX offers a built-in Call Center feature
called Incoming Call Distribution (ICD) Group.
Incoming calls to an ICD Group can be queued
or redirected to a preprogrammed destination,
answered in order of priority and monitored by
a supervisor extension.
ICD Group
Customers
Queuing
1.3.35 ICD GROUP FEATURES (Page 88)
Operating Manual
3
In This Manual,
•
The following abbreviations are used:
APT → Analog Proprietary Telephone
Display PT → Proprietary Telephone with a Display
DPT → Digital Proprietary Telephone
IP-PT → IP Proprietary Telephone
PS → Portable Station
PT → Proprietary Telephone
SIP Extension → Session Initiation Protocol Extension
SLT → Single Line Telephone
•
The illustrations of the PBX are based on the KX-TDE200.
•
The following icons are used frequently.
!!
Hints
Conditions
Important Notice
•
•
Under power failure conditions, the connected telephones may not operate. Please ensure that a
separate telephone, not dependent on local power, is available for emergency use.
Prior to connection of this product, please verify that the intended operating environment is
supported.
Satisfactory performance cannot be guaranteed for the following:
– interoperability and compatibility with all devices and systems connected to this product
– proper operation and compatibility with services provided by telecommunications companies
over connected networks
NOTES
•
•
•
•
•
•
4
This manual provides basic information on how you can access commonly used PBX functions
with proprietary telephones (PTs), single line telephones (SLTs), portable stations (PSs), and
DSS Consoles. For detailed information about each feature or setting, refer to the Feature Manual
or PC Programming Manual.
In this manual, several kinds of PTs appear, as follows:
– IP Proprietary Telephone (IP-PT)
– Digital Proprietary Telephone (DPT)
– Analog Proprietary Telephone (APT)
– Proprietary Telephone with a Display (Display PT)
"PT" is used as a generic term to represent all of these PTs. If a PBX feature only supports
specific PTs, such as IP-PTs, the available telephone types are clearly indicated.
This PBX supports SIP (Session Initiation Protocol) Extensions. However, some PBX features
may not be available for SIP Extensions, depending on your telephone type.
IP-PTs/SIP Extensions may become busy and you may not be able to make or receive calls,
depending on the network status.
The contents of this manual apply to PBXs with a certain software version, as indicated on the
cover of this manual. To confirm the software version of your PBX, refer to the PC Programming
Manual or PT Programming Manual.
Product specifications are subject to change without notice.
Operating Manual
Notes for SIP Extension Users
Before using a SIP Extension, please read the following notes.
a. The following features are available for SIP Extension users:
–
–
–
–
Making calls
Answering calls
Holding calls
Transferring calls (You cannot go on-hook before the transferred party answers.)
b. The available operations using feature numbers are limited. Refer to the telephone types
displayed at the top left of each operation.
c. The operations for Call Forwarding (FWD)/Do Not Disturb (DND)/Personal Speed Dialing using
the feature number, are not available. However, it is possible to enable these features at SIP
Extensions if set through system programming.
d. The tones listed in "4.3.1 Tone" are not available for SIP Extension users. Tones or the tone types
may vary depending on the type of telephone being used. For example, when you put a call on
hold, a specific tone for the SIP Extension may be heard, or no tone may be heard.
e. Any number pressed while hearing a Busy/DND/Reorder tone, such as the feature number to
activate Automatic Callback Busy, will be ignored.
f.
The operations for SIP Extensions may differ from the steps in this manual, and may vary
depending on the type of telephone being used.
Trademarks
•
•
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by Matsushita Electric Industrial Co., Ltd. is under license.
All other trademarks identified herein are the property of their respective owners.
Operating Manual
5
Important Information
SAVE THESE INSTRUCTIONS
SECURITY PRECAUTIONS
In order to use the PBX safely and correctly the Security Requirements below must be observed. Failure to
do so may result in:
•
Loss, leakage, falsification or theft of user information.
•
Illegal use of the PBX by a third party.
•
Interference or suspension of service caused by a third party.
What is User Information?
User Information is defined as:
1. Information stored on the SD Memory Card:
Phonebook data, user IDs, system settings data, passwords (User/Administrator/Installer),
Personal Identification Numbers (PINs), etc.
2. Information sent from the PBX to a PC or other external device:
Phone call data (including telephone numbers of outside parties), call charge data, etc.
Security Requirements
1. The SD Memory Card contains software for all the processes of the PBX and all customer data. It can
be easily removed and taken away from the PBX by a third party. Therefore, do not allow unauthorized
access to prevent data leakage.
2. Always make backups of data stored on the SD Memory Card. For details, consult your dealer.
3. To prevent illegal access from the Internet, active a Firewall.
4. To avoid unauthorized access and possible abuse of the PBX, we strongly recommend:
a. Keeping the password secret.
b. Selecting a complex, random password that cannot be easily guessed.
c. Changing your password regularly.
5. Perform the following when sending the PBX for repair or handing it over to a third party.
a. Make a backup of data stored on the SD Memory Card.
b. Using an SD formatter, format the SD Memory Card so that information cannot be retrieved from it.
6. To prevent data leakage, render the SD Memory Card physically unusable before disposal.
7. When user information is sent from the PBX to a PC or other external device, the confidentiality of that
information becomes the responsibility of the customer. Before disposing of the PC or other external
device, ensure that data cannot be retrieved from it by formatting the hard disk and/or rendering it
physically unusable.
6
Operating Manual
WARNING
•
•
•
•
•
•
•
•
THIS UNIT MAY ONLY BE INSTALLED AND SERVICED BY QUALIFIED SERVICE
PERSONNEL.
IF DAMAGE TO THE UNIT EXPOSES ANY INTERNAL PARTS, DISCONNECT THE
POWER SUPPLY CORD IMMEDIATELY AND RETURN THE UNIT TO YOUR DEALER.
UNPLUG THIS UNIT FROM THE AC OUTLET IF IT EMITS SMOKE, AN ABNORMAL
SMELL OR MAKES UNUSUAL NOISE. THESE CONDITIONS CAN CAUSE FIRE OR
ELECTRIC SHOCK. CONFIRM THAT SMOKE HAS STOPPED AND CONTACT AN
AUTHORIZED PANASONIC FACTORY SERVICE CENTER.
WHEN RELOCATING THE EQUIPMENT, FIRST DISCONNECT THE TELECOM
CONNECTION BEFORE DISCONNECTING THE POWER CONNECTION. WHEN THE
UNIT IS INSTALLED IN THE NEW LOCATION, RECONNECT THE POWER FIRST,
AND THEN RECONNECT THE TELECOM CONNECTION.
THIS UNIT IS EQUIPPED WITH A GROUNDED PLUG. FOR SAFETY REASONS THIS
PLUG MUST ONLY BE CONNECTED TO A GROUNDED OUTLET THAT HAS BEEN
INSTALLED ACCORDING TO APPLICABLE REGULATIONS.
TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
THE POWER SUPPLY CORD IS USED AS THE MAIN DISCONNECT DEVICE.
ENSURE THAT THE AC OUTLET IS LOCATED NEAR THE EQUIPMENT AND IS
EASILY ACCESSIBLE.
TO PROTECT THIS UNIT FROM STATIC ELECTRICITY, DO NOT TOUCH ANY
EXTERNAL CONNECTORS OF THE UNIT.
Operating Manual
7
Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the
risk of fire, electric shock and injury to persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Clean with a damp cloth.
4. Do not use the product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool.
5. Do not place this product on an unstable surface, as a fall may cause serious internal damage.
6. Slots and openings in the front, back and bottom of the cabinet are provided for ventilation; to protect
it from overheating, these openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface while in use. The product
should never be placed near or over a radiator or other heat source. This product should not be placed
in a sealed environment unless proper ventilation is provided.
7. The product should only be connected to the type of electrical power supply specified on the product
label. If you are not sure of the type of power supply to your home, consult your dealer or local power
company.
8. For safety purposes this unit is equipped with a grounded plug. If you do not have a grounded outlet,
please have one installed. Do not bypass this safety feature by tampering with the plug.
9. Do not allow anything to rest on the power cord. Do not locate this product where the power cord may
be stepped on or tripped on.
10. To reduce the risk of fire or electric shock, do not overload wall outlets and extension cords.
11. Do not insert objects of any kind into this product through its slots and openings, as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill
liquid of any kind on or in the product.
12. To reduce the risk of electric shock, do not disassemble this product. Only qualified personnel should
service this product. Opening or removing covers may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock.
13. Unplug this product from the wall outlet and have it serviced by qualified service personnel in the
following cases:
a)
b)
c)
d)
When the power supply cord or plug is damaged or frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or water.
If the product does not operate according to the operating instructions. Adjust only the controls that
are explained in the operating instructions. Improper adjustment of other controls may result in
damage and may require service by a qualified technician to restore the product to normal
operation.
e) If the product has been dropped or the cabinet has been damaged.
f) If product performance deteriorates.
14. Avoid using wired telephones during an electrical storm. There is a remote risk of electric shock from
lightning.
15. Do not use a telephone in the vicinity of a gas leak to report the leak.
8
Operating Manual
Attention
•
•
•
Keep the unit away from heating appliances and devices that generate electrical noise such as
fluorescent lamps, motors and televisions. These noise sources can interfere with the performance of
the PBX.
This unit should be kept free of dust, moisture, high temperature (more than 40 °C [104 °F]) and
vibration, and should not be exposed to direct sunlight.
If you are having problems making calls to outside destinations, follow this procedure to test the CO
lines:
1. Disconnect the PBX from all CO lines.
2. Connect known working single line telephones (SLTs) to those CO lines.
3. Make a call to an external destination using those SLTs.
•
•
•
If a call cannot be carried out correctly, there may be a problem with the CO line that the SLT is
connected to. Contact your telephone company.
If all SLTs operate properly, there may be a problem with your PBX. Do not reconnect the PBX to the
CO lines until it has been serviced by an authorized Panasonic Factory Service Center.
Wipe the unit with a soft cloth. Do not clean the unit with abrasive powders or with chemical agents such
as benzene or thinner.
When using a Panasonic proprietary telephone (PT), use only the correct Panasonic handset.
For users of PC Phone (Free License Version) shipped with KX-T7601 USB Module:
All features of the PC Phone software are available for 90 days from the date of installation.
After this period expires, the following buttons on the Operation Screen will become unavailable:
– Recording
– TAM
– Voice Memo
– Text Memo
– Speed
To continue using any of the corresponding features after the trial period, please purchase KXTDA0350 (PC Phone, 5 licenses).
Notice for users in California
This product contains a CR coin cell lithium battery that
contains perchlorate material—special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Operating Manual
9
When you ship the product
Carefully pack and send it prepaid, adequately insured and preferably in the original carton. Attach a
postage-paid letter, detailing the symptom, to the outside of the carton. DO NOT send the product to
the Executive or Regional Sales offices. They are NOT equipped to make repairs.
Product Service
Panasonic Factory Service Centers for this product are listed in the service center directory. Consult
your certified Panasonic dealer for detailed instructions.
For Future Reference
Please print, record, and retain the following information for future reference.
Note
The serial number of this product can be found on the label affixed to the unit. You should record the
model number and the serial number of this unit as a permanent record of your purchase to aid in
identification in the event of theft.
MODEL NO.
SERIAL NO.
DATE OF PURCHASE
NAME OF DEALER
DEALER'S ADDRESS
DEALER'S TELEPHONE NO.
10
Operating Manual
F.C.C. REQUIREMENTS AND RELEVANT
INFORMATION
1. Notification to the Telephone Company
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On
the side of this equipment is a label that contains, among other information, a product identifier in the
format US: ACJMF03AKX-TDA100. If requested, this number must be provided to the telephone
company.
Installation must be performed by a qualified professional installer. If required, provide the telephone
company with the following technical information:
•
Telephone numbers to which the system will be connected
•
Make: Panasonic
•
Model: KX-TDE100 and KX-TDE200
•
Certification No.: found on the side of the unit
•
Ringer Equivalence No.: 0.3A
•
Facility Interface Code: 02LS2, 04DU9.BN/DN/1KN/1SN
•
Service Order Code: 9.0F, 6.0P
•
Required Network Interface Jack: RJ21X, RJ48C, RJ2HX
2. Ringer Equivalence Number (REN)
The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming
call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number
of devices that may be connected to a line, as determined by the total RENs, contact the local telephone
company. The REN for this product is part of the product identifier that has the format US:
ACJMF03AKX-TDA100. The digits represented by 03 are the REN without a decimal point (e.g., 03 is
a REN of 0.3). For earlier products, the REN is separately shown on the label.
3. Incidence of Harm to the Telephone Lines
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn't practical,
the telephone company will notify the customer as soon as possible. Also, you will be advised of your
right to file a complaint with the FCC if you believe it is necessary.
4. Changes in Telephone Company Communications Facilities, Equipment, Operations and
Procedures
The telephone company may make changes in its facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this happens the telephone company will provide
advance notice in order for you to make necessary modifications to maintain uninterrupted service.
5. Trouble with this equipment
If trouble is experienced with this equipment, for repair or warranty information, please see the attached
warranty, which includes the Service Center Directory. If the equipment is causing harm to the
telephone network, the telephone company may request that you disconnect the equipment until the
problem is resolved.
6. Connection to Party Line
Connection to party line service is subject to state tariffs. Contact the state public utility commission,
public service commission or corporation commission for information.
Operating Manual
11
7. Combined Use with Alarm Equipment
If your home has specially wired alarm equipment connected to the telephone line, ensure the
installation of this equipment does not disable your alarm equipment. If you have questions about what
will disable alarm equipment, consult your telephone company or a qualified installer.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this device.
When programming emergency numbers and/or making test calls to emergency numbers:
1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.
2. Perform such activities in the off-peak hours, such as early morning hours or late evenings.
WARNING
The software contained in the ARS and TRS features to allow user access to the
network must be upgraded to recognize newly established network area codes and
exchange codes as they are placed into service.
Failure to upgrade the on-premise PBXs or peripheral equipment to recognize the new
codes as they are established will restrict the customer and users of the PBX from
gaining access to the network and to these codes.
KEEP THE SOFTWARE UP TO DATE WITH THE LATEST DATA.
12
Operating Manual
For Cell Station
CAUTION
Any changes or modifications not expressly approved by the party responsible for compliance could
void user's authority to operate this device.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Some wireless telephones operate at frequencies that may cause interference to nearby TVs and
VCRs. To minimize or prevent such interference, the base of the wireless telephone should not be
placed near or on top of a TV or VCR. If interference is experienced, move the wireless telephone
further away from the TV or VCR. This will often reduce, or eliminate, interference.
Operating near 2.4 GHz electrical appliances may cause interference. Move away from the electrical
appliances.
CAUTION
To comply with FCC RF exposure requirements in uncontrolled environment:
•
This equipment must be installed and operated in accordance with provided instructions and a
minimum 20 cm (8 in) spacing must be provided between antenna and all person's body (excluding
extremities of hands, wrist and feet) during wireless modes of operation.
•
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
Medical—consult the manufacturer of any personal medical devices, such as pacemakers, to
determine if they are adequately shielded from external RF (radio frequency) energy. (The unit operates
in the frequency range of 2401 MHz to 2480 MHz, and the power output level can range from 0.004 W
to 0.4 W.) Do not use the unit in health care facilities if any regulations posted in the area instruct you
not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to
external RF (radio frequency) energy.
Operating Manual
13
Table of Contents
1
Operation............................................................................................... 17
1.1
1.1.1
1.2
1.2.1
1.2.2
1.3
1.3.1
1.3.2
1.3.3
1.3.4
1.3.5
1.3.6
1.3.7
1.3.8
1.3.9
1.3.10
1.3.11
1.3.12
1.3.13
1.3.14
1.3.15
1.3.16
1.3.17
1.3.18
1.3.19
1.3.20
1.3.21
1.3.22
1.3.23
1.3.24
1.3.25
1.3.26
1.3.27
1.3.28
1.3.29
1.3.30
1.3.31
1.3.32
1.3.33
1.3.34
1.3.35
1.3.36
1.3.37
1.3.38
1.3.39
1.3.40
14
Before Operating the Telephones..................................................................................18
Before Operating the Telephones .....................................................................................18
Basic Operations.............................................................................................................28
Making Calls......................................................................................................................28
Answering Calls ................................................................................................................30
Telephone Features and Operation ...............................................................................32
Absent Message ...............................................................................................................32
Account Code Entry ..........................................................................................................33
Alternate Calling—Ring/Voice ...........................................................................................34
Automatic Callback Busy (Camp-on) ................................................................................34
BGM (Background Music) .................................................................................................36
Call Hold ...........................................................................................................................36
Call Monitor .......................................................................................................................39
Call Park............................................................................................................................39
Call Pickup ........................................................................................................................41
Call Splitting ......................................................................................................................42
Call Transfer ......................................................................................................................44
CALL WAITING FEATURES .............................................................................................47
Call Waiting Tone ..............................................................................................................52
Character Entry .................................................................................................................53
Conference........................................................................................................................55
Conference, Unattended ...................................................................................................60
Data Line Security.............................................................................................................61
DISA (Direct Inward System Access)................................................................................61
DND (Do Not Disturb) .......................................................................................................64
Door Open ........................................................................................................................67
Doorphone Call .................................................................................................................68
EFA (External Feature Access).........................................................................................69
Executive Busy Override ...................................................................................................69
Extension Dial Lock...........................................................................................................71
Extension Feature Clear ...................................................................................................72
Extension PIN (Personal Identification Number) ...............................................................73
External Relay...................................................................................................................75
External Sensor ................................................................................................................75
FWD (Call Forwarding) .....................................................................................................76
Hands-free Answerback ....................................................................................................82
Hands-free Operation........................................................................................................83
Headset Operation ............................................................................................................84
HOSPITALITY FEATURES ...............................................................................................87
Hot Line.............................................................................................................................87
ICD GROUP FEATURES ..................................................................................................88
ICD Group Features—Call Log History for ICD Group .....................................................89
ICD Group Features—Incoming Call Queue Monitor........................................................90
ICD Group Features—Log-in/Log-out ...............................................................................91
ICD Group Features—Log-in/Log-out Monitor and Remote Control.................................93
ICD Group Features—Manual Queue Redirection ...........................................................95
Operating Manual
1.3.41
1.3.42
1.3.43
1.3.44
1.3.45
1.3.46
1.3.47
1.3.48
1.3.49
1.3.50
1.3.51
1.3.52
1.3.53
1.3.54
1.3.55
1.3.56
1.3.57
1.3.58
1.3.59
1.3.60
1.3.61
1.3.62
1.3.63
1.3.64
1.3.65
1.3.66
1.3.67
1.3.68
1.3.69
1.3.70
1.3.71
1.3.72
1.3.73
1.3.74
1.3.75
1.3.76
1.3.77
1.4
1.4.1
1.4.2
1.4.3
1.4.4
2
ICD Group Features—Supervisory................................................................................... 96
Message Waiting .............................................................................................................. 97
Mute .................................................................................................................................. 99
Off-hook Monitor ............................................................................................................. 100
OHCA (Off-hook Call Announcement) ............................................................................ 100
One-touch Dialing ........................................................................................................... 101
Paging ............................................................................................................................. 102
Paralleled Telephone....................................................................................................... 103
PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension........ 104
Printing Message ............................................................................................................ 107
Privacy Release .............................................................................................................. 108
Private Network Features—CLIP (Calling Line Identification Presentation) ................... 109
Private Network Features—CLIR (Calling Line Identification Restriction) ...................... 109
Private Network Features—COLP (Connected Line Identification Presentation) ........... 110
Private Network Features—COLR (Connected Line Identification Restriction) .............. 110
Private Network Features—TIE Line Access .................................................................. 111
Quick Dialing................................................................................................................... 112
Redial, Last Number ....................................................................................................... 112
Room Status Control ...................................................................................................... 112
Self Labeling (KX-NT366 only) ....................................................................................... 115
Speed Dialing, Personal ................................................................................................. 115
Speed Dialing, System ................................................................................................... 116
SVM (Simplified Voice Message).................................................................................... 117
TAFAS (Trunk Answer From Any Station) ....................................................................... 126
Timed Reminder ............................................................................................................. 127
Time Service................................................................................................................... 128
Verification Code Entry ................................................................................................... 129
VOICE MAIL FEATURES................................................................................................ 130
Voice Mail Features—LCS (Live Call Screening)............................................................ 130
Voice Mail Features—Two-way Record........................................................................... 133
Voice Mail Features—Voice Mail Integration................................................................... 134
Wake-up Call................................................................................................................... 135
Walking COS .................................................................................................................. 137
Walking Extension .......................................................................................................... 138
Walking Extension, Enhanced ........................................................................................ 139
Whisper OHCA ............................................................................................................... 141
Wireless XDP Parallel Mode ........................................................................................... 142
Display Features ........................................................................................................... 143
Call Log, Incoming .......................................................................................................... 143
Call Log, Outgoing .......................................................................................................... 145
Directories....................................................................................................................... 148
System Feature Access .................................................................................................. 150
Manager Operation............................................................................. 155
2.1
2.1.1
2.1.2
2.1.3
2.1.4
2.1.5
2.1.6
Manager Service Features ........................................................................................... 156
Dial Tone Transfer ........................................................................................................... 156
External BGM (Background Music)................................................................................. 156
OGM (Outgoing Messages) ............................................................................................ 157
Private Network Features—NDSS (Network Direct Station Selection) Monitor Release ....... 159
Remote Extension Dial Lock........................................................................................... 159
Time Service Mode Control ............................................................................................ 159
Operating Manual
15
3
Customizing Your Phone & System.................................................. 163
3.1
3.1.1
3.1.2
3.1.3
3.1.4
3.2
3.2.1
3.2.2
3.3
3.3.1
3.3.2
4
Personal Programming................................................................................................. 164
Programming Information................................................................................................ 164
Personal Programming....................................................................................................164
Programming Feature Clear............................................................................................ 173
Customizing the Buttons ................................................................................................. 175
Manager Programming ................................................................................................. 181
Programming Information................................................................................................ 181
Manager Programming ................................................................................................... 182
System Programming ................................................................................................... 184
Programming Information................................................................................................ 184
System Programming...................................................................................................... 187
Appendix ............................................................................................. 191
4.1
4.1.1
4.2
4.2.1
4.3
4.3.1
Troubleshooting ............................................................................................................ 192
Troubleshooting...............................................................................................................192
Feature Number Table .................................................................................................. 195
Feature Number Table..................................................................................................... 195
Tone................................................................................................................................ 204
Tone ................................................................................................................................ 204
Index .......................................................................................................... 209
16
Operating Manual
Section
1
Operation
This chapter shows you step by step how to use each feature.
Read this chapter to become familiar with the many useful
features of this PBX.
Operating Manual
17
1.1 Before Operating the Telephones
1.1
Before Operating the Telephones
1.1.1
Before Operating the Telephones
What Kind of Telephone Can Be Used?
You can use the following types of telephone with this PBX:
•
Panasonic IP Proprietary Telephone (IP-PT)
(e.g., KX-NT346 or KX-NT366)
•
SIP Extension
(SIP Hardphone/SIP Softphone)
•
Panasonic Proprietary Telephone (PT)
(e.g., KX-T7636)
•
Panasonic Portable Station (PS)
(e.g., KX-TD7690)
•
Single Line Telephone (SLT)
(e.g., rotary pulse telephone)
Which features are available depend on the type of telephone being used. If you are using a Panasonic
REDIAL
proprietary telephone with a special feature button such as
or a display (Display PT) or both, you can
follow the operation with the button or display messages for easy programming.
If you use a large display telephone (e.g., KX-NT346 or KX-T7636), you can follow the displayed messages
to use the features. If your telephone does not have feature buttons and/or a display, you may operate the
PBX by entering a feature number instead. Follow the operation for your type of telephone.
If you use a Console, you can use the buttons on the Console as the buttons on the connected proprietary
telephone.
•
If you use a Panasonic proprietary
telephone which does not have feature
buttons, you may change one of the unused
flexible buttons to a feature button. Refer to
"3.1.4 Customizing the Buttons".
Registration for your Portable Station (PS)/SIP Extension
Your PS/SIP Extension must be registered with the PBX and assigned an extension number before initial
use, through system programming. To confirm the extension number of your PS, refer to "Your extension
information" in "3.1.2 Personal Programming". For SIP Extension users, follow the instructions for your SIP
Extension.
Feature Numbers
To use certain features, you need to enter specified feature numbers (and an additional parameter, if
required).
There are two types of feature numbers as follows:
•
Flexible feature number
•
Fixed feature number
18
Operating Manual
1.1 Before Operating the Telephones
Fixed feature numbers cannot be changed. However, you can change the flexible numbers to other numbers
for easier use. In this manual, the default numbers (factory installed) are used for operations.
A flexible number is shown as
(half-shaded key). Use the new programmed number if you have
changed the feature number. Write the new number in the "Feature Number Table" (Appendix).
If you use a single line telephone which does not have the " " or "#" keys;
it is not possible to access features that have " " or "#" in their feature numbers.
Tone
You will hear various tones, during or after an operation, for confirmation. Refer to "4.3.1 Tone" (Appendix).
Display
In this manual, you will see "the display ...". This refers to the display of a Panasonic proprietary telephone.
If your telephone is not a Panasonic display proprietary telephone, the message will not be displayed.
If you use a Panasonic display proprietary telephone, the display helps you confirm the settings. Some
proprietary telephones also give you easy access to features. A message is displayed depending on the
feature. By pressing the corresponding button on the side or at the bottom of the display, or pressing the
Navigator Key, you can access the desired feature.
Furthermore, depending on the display proprietary telephone, you can operate features or make calls using
the display message. Refer to "1.4 Display Features".
Your Extension Number
If you use a Panasonic display proprietary telephone, you can check your own extension number on the
display. Press the TRANSFER button or Soft (S1) button while on-hook.
Using a Navigator Key/Jog Dial/Volume Key
The Navigator Key can be used for the display contrast and the volume control or you can search for desired
items on the display. Press the Navigator Key/Volume Key or rotate the Jog Dial in the desired direction. The
contrast or the volume level and the items will change as follows:
Navigator Key
Jog Dial
Volume Key
Up
Up
(Level increases)
Left
ENTER
Left
(counter-clockwise)
Right
(clockwise)
(Level increases)
Right
Level decreases
Level increases
Down
Down
(Level decreases)
(Level decreases)
Examples
The displays and the illustrations shown as examples are from a telephone connected to the KX-TDE200.
Operating Manual
19
1.1 Before Operating the Telephones
Restrictions
Some features may be restricted at your extension depending on system programming and the type of
telephone being used.
Icon Descriptions
The following icons show you the feature availability, notes and action to use the features.
This feature cannot be used with a
single line telephone.
See "Programming" for Related
Programming if necessary.
desired no.
Seize a CO line (One of the
following).
OR
•
Press the CO button.
9
•
Dial
automatic line access
OR
number
9.
CO line
group no. •
Dial CO line group access
number and CO line group
number.
(CO)
8
Off-hook (One of the following).
•
Lift the handset.
•
Press the SP-PHONE button.
•
Press the MONITOR button. (To
start talking, lift the handset.)
•
Press TALK button.
Press the Call button on the
Doorphone.
On-hook (One of the following).
•
Hang up.
•
Press the SP-PHONE button.
•
Press the MONITOR button.
•
Press CANCEL button.
Press the hookswitch lightly.
Press the corresponding feature
button on the proprietary telephone.
Talk.
Enter the required number.
<Example>
You will hear a busy, confirmation,
dial, ring or ringback tone.
B. Tone: Busy Tone
C. Tone: Confirmation Tone
D. Tone: Dial Tone
R. Tone: Ring Tone
R. B. Tone: Ringback Tone
account code
Enter the account code.
extension no.
phone no.
HOLD
20
Dial an extension number.
Dial the telephone number.
Press the HOLD button on your SIP
Extension.
Operating Manual
outside
phone no.
dial key
Dial outside phone number.
Press any dial key (0–9,
, #).
1.1 Before Operating the Telephones
When You Use a Panasonic Proprietary Telephone
If you use a Panasonic proprietary telephone and the Console, they may have some of the useful feature
buttons described below. For a PS user, refer to "Operating Instructions" for PS. These buttons make
operations simple. The illustrations may differ from the buttons on your telephone.
Buttons on the PT
SP-PHONE:
Used for hands-free operation.
Flexible Buttons:
Used to make or receive an outside call
(CO button), or as a feature button.
Button assignment is required.
Refer to "Customized Buttons" for details.
SP-PHONE
AUTO DIAL/STORE:
Used for System/Personal Speed Dialing
or storing program changes.
PAUSE
AUTO DIAL
PAUSE:
Used to insert a pause when storing a
telephone number. This button also
functions as the PROGRAM button when
there is no PROGRAM button on your
telephone.
STORE
REDIAL:
Used to redial the last dialed number.
MESSAGE:
Used to leave a message waiting
indication or call back the party who left
the message waiting indication.
MESSAGE
REDIAL
INTERCOM:
Used to make or receive intercom calls.
Soft Buttons:
Used to select the item displayed on the
bottom of the display.
MONITOR:
Used for hands-free dialing. You can
monitor the party's voice in hands-free
mode.
AUTO ANS (Auto Answer)/MUTE:
Used to receive an incoming call in
hands-free mode or mute the microphone
during a conversation.
INTERCOM
MONITOR
AUTO ANS
MUTE
Operating Manual
21
1.1 Before Operating the Telephones
TRANSFER:
Used to transfer a call to another party.
TRANSFER
FLASH/
RECALL
VOICE CALL
MUTE
PROGRAM
RELEASE
HOLD:
Used to place a call on hold.
HOLD
CONF (Conference):
Used to establish a multiple party
conversation.
FLASH/RECALL:
Used to disconnect the current call and
make another call without hanging up.
This button can also be used as a
CANCEL button while on-hook.
CONF
VOICE CALL/MUTE:
Used to monitor an intercom call
automatically, but it cannot be used for
hands-free conversations. It also mutes
the handset microphone during a
conversation.
PROGRAM:
Used to enter and exit the Programming
mode.
Call Forwarding (FWD)/Do Not Disturb
(DND):
Used to perform Call Forwarding (FWD)
or Do Not Disturb (DND).
FWD/DND
ANSWER
RELEASE:
Used to disconnect the line.
Navigator Key/Jog Dial/Volume Key:
Used to adjust the volume and the display
contrast or select desired items.
VOL
22
Operating Manual
ANSWER:
Used to answer an incoming call.
1.1 Before Operating the Telephones
Programmable Feature (PF):
Located on the upper part of the Flexible
button array or on the DSS Console.
Assigns the desired button and used to
access the stored feature. Mostly used as
a One-touch Dialing button. (Only the "F
and number" may be shown on some
telephones.)
(PF)
SELECT
SELECT:
Used to select the displayed item or to call
the displayed phone number.
ENTER:
Used to confirm the selected item.
MODE
MODE:
Used to shift the display to access various
features.
SHIFT
SHIFT:
Used to access the second level of Soft
button features.
CANCEL:
Used to cancel the selected item.
NEXT PAGE:
Used to switch the page for the Self
Labeling feature. (KX-NT366 only)
Customized Buttons
If the term is in parentheses like (Account) in this manual, it means a flexible button has been made into an
"Account" button. To customize, refer to "3.1.4 Customizing the Buttons".
Button
Feature
Loop-CO (L-CO)
Used to access an idle CO line for making outside calls.
Incoming outside calls from any CO line arrive at this button.
Group-CO (G-CO)
Used to access an idle CO line in a specified CO line group for making outside
calls.
Incoming calls from CO lines in the assigned CO line group arrive at this button.
Single-CO (S-CO)
Used to access a specified CO line for making or receiving outside calls.
Direct Station Selection (DSS)
Used to access an extension with one touch.
It is also possible to be changed to the other feature button.
One-touch Dialing
Used to access a desired party or system feature with one touch.
Incoming Call Distribution
Group (ICD Group)
Used to access a specified incoming call distribution group for making or
receiving calls.
Message
Used to leave a message waiting indication or call back the party who left the
message waiting indication.
Message for Another
Extension
Used to have a Message button for another extension.
Call Forwarding (FWD)/Do Not
Used to forward all calls to a specified destination or refuse.
Disturb (DND)—Both calls
FWD/DND—Outside calls
Used to forward CO line calls to a specified destination or refuse.
FWD/DND—Intercom calls
Used to forward intercom calls to a specified destination or refuse.
Group FWD—Both calls
Used to forward all the calls to your group to a specified destination.
Operating Manual
23
1.1 Before Operating the Telephones
Button
Feature
Group FWD—Outside calls
Used to forward the CO line calls to your group to a specified destination.
Group FWD—Intercom calls
Used to forward the intercom calls to your group to a specified destination.
Account
Used to enter an account code.
Conference
Used to establish a multiple party conversation.
Terminate
Used to disconnect the current call and make another call without hanging up.
External Feature Access (EFA) Used to access special features offered by a host PBX or a telephone company.
Call Park
Used to park or retrieve a call in a preset parking zone.
Call Park (Automatic Park
Zone)
Used to park a call in an idle parking zone automatically.
Call Log
Used to show the incoming call information.
Call Log for ICD Group
Used to have a Call Log button for incoming call distribution group.
Log-in/Log-out
Used to switch between the log-in and log-out mode.
Log-in/Log-out of a specified
group
Used to have a Log-in/Log-out button for another incoming call distribution
group.
Log-in/Log-out for all groups
Used to have a Log-in/Log-out button for all groups.
Hurry-up
Used to transfer the longest waiting call in the queue of an incoming call
distribution group to the overflow destination.
Wrap-up
Used to switch the wrap-up status, Ready and Not Ready mode.
System Alarm
Used to confirm a PBX error.
Time Service (Day/Night/
Lunch/Break)
Used to switch the time service mode.
Answer
Used to answer an incoming call.
Release
Used to disconnect the line during or after a conversation or to complete a Call
Transfer.
Toll Restriction (TRS)
Used to change the toll restriction level of other extension users temporarily.
Calling Line Identification
Restriction (CLIR)
Used to switch between the CLIP and CLIR services.
Connected Line Identification
Restriction (COLR)
Used to switch between the COLP and COLR services.
Headset
Used to talk using the headset.
Time Service Switching Mode
Used to switch the time service mode, Automatic or Manual.
(Automatic/Manual)
Two-way Record
Used to record a conversation into your own mailbox.
Two-way Transfer
Used to record a conversation into the mailbox of a specific extension.
One-touch Two-way Transfer
Used to record a conversation into the mailbox of a specific extension with one
touch.
Live Call Screening (LCS)
Used to monitor your own voice mailbox while an incoming caller is leaving a
message and, if desired, intercept the call.
24
Operating Manual
1.1 Before Operating the Telephones
Button
Feature
Voice Mail Transfer
Used to transfer a call to the mailbox of a specified extension.
Network Direct Station
Selection (NDSS)
Used to access an extension connected to other PBXs in the network with one
touch.
CTI
Used to access CTI features.
Check-in
Used to switch the room status of extensions from Check-out to Check-in.
Check-out
Used to switch the room status of extensions from Check-in to Check-out.
Primary Directory Number
(PDN)
Used to make and receive both outside and intercom calls.
Secondary Directory Number
(SDN)
Used to show the current status of another extension, call the extension, and
pick up or transfer calls to it.
Operating Manual
25
1.1 Before Operating the Telephones
How to Follow the Steps
An example of system operation is shown below.
Calling Another Extension
Feature title
Intercom Call
PT and SLT Extn.
PT/SLT/PS/SIP
extension no.
OR
(DSS)
Off-hook.
Dial extension number
or press DSS.
Talk.
The DSS button light shows the current status as follows:
Off: The extension is idle.
Red on: Your or another extension is using the line.
Operation steps
The description of the
icons are explained on
"Icon Descriptions".
Conditions
To call using a directory, refer to "1.4.3 Directories".
Hints
For quick operation
If you are an operator or dial some extensions frequently, DSS buttons are useful.
Hands-free Operation
You can make an intercom call and have a conversation in hands-free mode using the SPPHONE button (refer to "1.3.37 Hands-free Operation").
Customizing Your Phone
3.1.2 Settings on the Programming Mode—Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.
3.1.3 Customizing the Buttons
Create or edit a Direct Station Selection (DSS) button.
Programming References: The related or required programming is noted.
26
Operating Manual
1.1 Before Operating the Telephones
Connection Example
This diagram shows you a connection example.
Private IP
Network
Telephone Company
Computer
Pure IP-PBX
KX-TDE100
Router
KX-TDE200
Computer
Batteries
IP Proprietary
Telephone
Single Line
Telephone
Computer
Fax Machine
IP Softphone
Analog
DSS Console
Proprietary
Telephone
Printer
SIP (Session Initiation
Protocol) Extension
Wireless Phone
External Sensor/
External Relay
Doorphone & Door Opener
DSS Console
Digital
Proprietary
Telephone
Computer
(Server)
Portable Cell
Station Station
USB
KX-T7636/
KX-T7633
External Music Source
Pager/ Amplifier
Speaker
Computer
Computer
Voice Processing
System
KX-T7600 Digital KX-T7600 Digital
Proprietary
Proprietary
Telephone
Telephone
Operating Manual
27
1.2 Basic Operations
1.2
Basic Operations
1.2.1
Making Calls
–
–
–
Intercom Call
Operator Call
Calling an Outside Party
Intercom Call
You can call another extension user.
PT/SLT/PS/SIP Extn.
extension no.
OR
(DSS)
OR
*
Off-hook.
(SDN)
Talk.
Dial extension number,
or press DSS or SDN.
•
•
•
•
•
The DSS button light shows the current status as follows:
Off: The extension is idle.
Red on: Your or another extension is using the line.
* You have to press the SDN button once or twice depending on the mode of the SDN button.
For details, refer to "1.3.49 PDN (Primary Directory Number)/SDN (Secondary Directory
Number) Extension".
To call using a directory, refer to "1.4.3 Directories".
For quick operation
If you are an operator or dial some extensions frequently, DSS buttons are useful.
Hands-free Operation
You can make an intercom call and have a conversation in hands-free mode using the SPPHONE button (refer to "1.3.31 Hands-free Operation").
Customizing Your Phone
•
3.1.2 Personal Programming—Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.
•
3.1.4 Customizing the Buttons
Create or edit a Direct Station Selection (DSS) button.
28
Operating Manual
1.2 Basic Operations
Operator Call
You can call an extension or a group assigned as the operator.
PT/SLT/PS/SIP Extn.
0
Off-hook.
Enter 0.
Calling an Outside Party
You have to seize a CO line before dialing an outside phone number because external calls are made via
your PBX.
Select one of the following methods:
Automatic Line Access
PT/SLT/PS/SIP Extn.
(L-CO)
OR
outside
phone no.
9
Off-hook.
Press L-CO or
enter automatic
line access number.
Dial outside
phone number.
Talk.
CO Line Group Access
PT/SLT/PS/SIP Extn.
(G-CO)
OR
8
Off-hook.
CO line
group no.
Press G-CO or enter CO line
group access number and then
CO line group number (2 digits).
outside
phone no.
Dial outside phone
number.
Talk.
Operating Manual
29
1.2 Basic Operations
S-CO Line Access
PTPT/PS
and SLT
outside
phone no.
(S-CO)
Off-hook.
•
•
•
•
•
Press S-CO.
Dial outside
phone number.
Talk.
Each of the S-CO button or G-CO button light shows the current status as follows:
Off: The line is idle.
Red on: The line is in use.
You may be restricted from making a call to the specified outside party. To make a call, refer
to "1.3.67 Verification Code Entry" or "1.3.73 Walking COS".
To confirm number before dialing, you can enter a phone number and confirm it on the
display and then go off-hook. (Predialing)
To make a call to another party without going on-hook, press the FLASH/RECALL button.
It will re-access the CO line and provide external dial tone. Pressing the Terminate button will
provide intercom dial tone. You can dial the new phone number without going on/off-hook.
Hands-free Operation
You can make an outside call and have a conversation in hands-free mode using the SPPHONE button (refer to "1.3.31 Hands-free Operation").
Customizing Your Phone
•
3.1.2 Personal Programming—Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.
•
3.1.4 Customizing the Buttons
Create or edit a Loop-CO (L-CO) button, a Group-CO (G-CO) button, a Single-CO (SCO) button or a Terminate button.
1.2.2
Answering Calls
PT/SLT/PS/SIP Extn.
Off-hook.
30
Operating Manual
Talk.
1.2 Basic Operations
•
You can select one of the following methods to answer calls:
– Lift the handset to receive the preferred line.
(Default: Ringing line is selected.)
– Press the SP-PHONE button.
(Refer to "1.3.31 Hands-free Operation".)
– Press the flashing CO, INTERCOM, ICD Group, PDN, or SDN button directly.
– Press the Answer button.
Customizing Your Phone
•
3.1.2 Personal Programming—
Preferred Line Assignment—Incoming
Select the seized line when going off hook.
Alternate Receiving—Ring/Voice
Select the alerting method, either ring or the other party's voice.
•
3.1.4 Customizing the Buttons
Create or edit an Incoming Call Distribution Group (ICD Group), Primary Directory
Number (PDN), or Secondary Directory Number (SDN) button.
Operating Manual
31
1.3 Telephone Features and Operation
1.3
Telephone Features and Operation
1.3.1
Absent Message
You can show the reason you do not answer, if the caller uses a Panasonic display proprietary telephone.
There are eight preprogrammed messages and one for your personal message (16 characters). The
selected message is shown on the display of your telephone.
Message no.
Message (Example)
1
Will Return Soon
2
Gone Home
3
At Ext %%%% (Extension number)
4
Back at %%:%% (Hour:Minute)
5
Out until %%/%% (Month/Day)
6
In a Meeting
7
8
9
A message assigned for each extension.
(Personal Absent Message)
To set
PT/SLT/PS
7
Enter
Off-hook.
#
5
0
750.
1
2
3
4
5
6
7
8
9
Will Return Soon
Gone Home
At Ext %%%% +
Back at %%:%% +
Out until %%/%% +
In a Meeting
Extension no.
Hour : Minute
Month / Day
Enter required number.
C.Tone
Enter #.
On-hook.
To cancel
PT/SLT/PS
Off-hook.
32
Operating Manual
7
5
Enter
750.
0
0
Enter 0.
C.Tone
On-hook.
1.3 Telephone Features and Operation
•
Enter the desired value in the "%" positions. You must enter the correct number of characters
as represented by the "%" using 0 to 9 or .
The preprogrammed messages can be changed through system programming.
To create your personal message (Message no. 9), refer to "3.1.2 Personal Programming".
•
•
1.3.2
Account Code Entry
You may give a specified account code to extension users and check their telephone usage. You can specify
an account code for each client and check the call duration.
PT/SLT/PS/SIP Extn.
(Account)
account code
OR
4
Off-hook.
D.Tone
9
Press Account or
enter 49.
Enter account code
(max. 10 digits).
Enter #.
outside
phone no.
Dial outside
phone number.
Seize CO line before entering
outside phone number.
•
•
•
A Panasonic proprietary telephone extension user can enter an account code during a
conversation and when hearing reorder tone after the other party hangs up.
Account codes may use the digits "0" through "9".
Depending on the settings of your PBX, you may be required to enter an account code to
make an outside call.
•
If you enter the wrong code, press the " " key and re-enter the account code.
•
For your convenience, you can store the code with the phone number in the memory (e.g.,
Speed Dialing).
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit an Account button.
Operating Manual
33
1.3 Telephone Features and Operation
1.3.3
Alternate Calling—Ring/Voice
The caller can alternate the alerting method, either ring or
voice, when making an intercom call.
On the other hand, any extension can set the alerting
method, either ring or voice, when receiving an intercom call.
Ringing (Default): You can call the other party with a
ring tone.
Voice-calling: You can talk to the other party
immediately after confirmation tone.
Ring
Ring
Hello
OR
To change the method
PT/SLT/PS
After dialing
C.Tone
Enter
.
•
•
•
Talk.
Voice-calling from a SIP Extension is not available.
If the called party uses a SIP Extension, single line telephone (SLT) or portable station (PS),
Voice-calling is not available.
This feature is not available when the called party's telephone is in the Voice Call Deny mode.
Customizing Your Phone
•
3.1.2 Personal Programming—Alternate Receiving—Ring/Voice
Select the alerting method, either ring or the other party's voice.
1.3.4
Automatic Callback Busy (Camp-on)
If a dialed extension or a desired CO line is busy, you can set the telephone to receive callback ringing:
•
when a dialed extension becomes idle.
•
when your desired CO line that is in use by another extension becomes idle.
You cannot set Automatic Callback Busy for a busy party outside of the PBX.
When you answer the callback ringing:
•
For an outside call: The line is seized.
•
For an intercom call: The called extension starts ringing automatically.
34
Operating Manual
1.3 Telephone Features and Operation
To set (for both extension and CO line)
PT/SLT/PS
While hearing a busy tone
6
C.Tone
On-hook.
Enter 6.
To answer the callback ringing from an idle extension
PT/SLT/PS
While hearing a callback ringing
R.B.Tone
Talk.
Off-hook.
To answer the callback ringing from an idle CO line
PT/SLT/PS
While hearing a callback ringing
outside
phone no.
Off-hook.
•
Talk.
Dial outside
phone number.
If you do not answer the callback ringing within 10 seconds, this feature will be canceled.
Automatic Callback Busy Cancel
PT/SLT/PS
4
Off-hook.
Enter
6
46.
C.Tone
On-hook.
Operating Manual
35
1.3 Telephone Features and Operation
1.3.5
BGM (Background Music)
You can listen to the background music through your telephone speaker while on-hook. An
external music source, such as a radio, must be connected.
If your extension becomes busy (off-hook, making or receiving a call etc.), the music stops
temporarily. When you go back on-hook, the music starts again.
To select and set/cancel
PT
BGM no.
7
5
1
OR
0
Off-hook.
•
1.3.6
Enter
751.
Cancel
C.Tone
Enter BGM number
(1 digit) or 0 to cancel.
On-hook.
System programming may be required for some IP-PT users to listen to background music.
Call Hold
There are two types of hold. The difference between them is whether other people can retrieve your held
call (Regular Hold) or not (Exclusive Call Hold). As they can be alternated, ask your manager what the
current mode is.
•
For users of SIP Extensions:
The holding operation for SIP Extension users may differ from the steps in this section, and
may vary depending on the type of telephone being used.
Call Hold
PT/PS
During a conversation
HOLD
OR
TRANSFER
C.Tone
5
0
Press HOLD, or press TRANSFER and
then enter 50.
36
Operating Manual
C.Tone
On-hook.
1.3 Telephone Features and Operation
SLT
During a conversation
5
Press Recall/
hookswitch.
Enter
0
50.
C.Tone
On-hook.
SIP Extn.
During a conversation
HOLD
Press HOLD.
On-hook.
Operating Manual
37
1.3 Telephone Features and Operation
Call Hold Retrieve
PT/SLT/PS
At the holding extension (Call Hold Retrieve)
(CO)
OR
INTERCOM
OR
0
5
Off-hook.
A confirmation
tone is heard.
Press flashing CO or INTERCOM,
or enter 50.
Talk.
To retrieve an outside call from another extension—only Regular Hold
(Call Hold Retrieve–Specified with a held line number)
(CO)
OR
3
5
Off-hook.
Press CO, or enter
held line no.
A confirmation
tone is heard.
Talk.
53 and then held line number (3 digits).
To retrieve an intercom call or outside call from another extension—only Regular Hold
(Call Hold Retrieve–Specified with a holding extension number)
(DSS)
5
1
OR
holding
extension no.
Off-hook.
Enter
51.
Press DSS or dial
holding extension
number.
SIP Extn.
HOLD
Off-hook.
38
Operating Manual
Press HOLD.
Talk.
C.Tone
Talk.
1.3 Telephone Features and Operation
•
•
•
•
•
1.3.7
The CO or INTERCOM button light shows the current status as follows:
– Regular Hold mode
Flashing green slowly: Your held call
Flashing red: Another extension's held call
– Exclusive Call Hold mode
Flashing green moderately: Your held call
Red on: Another extension's held call
If a call is not retrieved within a specified time, you will hear an alarm as a reminder (Hold
Recall).
If an outside call is not answered within a specified time, it is automatically disconnected.
Hold Mode Change (PT only)
After pressing the HOLD button, if you press the HOLD button again, the status switches from
the Regular Hold mode to the Exclusive Call Hold mode or from the Exclusive Call Hold mode
to the Regular Hold mode.
If Automatic Call Hold has been preprogrammed, you can put the current call on hold
automatically by pressing another CO, ICD Group or INTERCOM button to make or answer
another call.
For the Call Hold Retrieve operation using a PDN/SDN button, refer to "1.3.49 PDN (Primary
Directory Number)/SDN (Secondary Directory Number) Extension".
Call Monitor
A preprogrammed extension user can listen to the ongoing conversation of a busy extension user.
To monitor
PT/SLT/PS
(DSS)
OR
5
(PDN)
OR
Monitoring starts
C.Tone
B.Tone
(SDN)
Off-hook.
OR
Enter 5.
extension no.
Press red DSS, PDN, or SDN,
or dial extension number.
1.3.8
Call Park
You can put a call on hold in a common parking zone of the PBX so that any extension can retrieve the
parked call. You can use this feature as a transferring feature.
A call can be put into either a specified parking zone (Specified) or any idle parking zone (Auto). If a Call
Park button and Call Park (Automatic Park Zone) button have been established, you can select either way
to park by simply pressing the corresponding button.
Operating Manual
39
1.3 Telephone Features and Operation
When a call is parked automatically, or more than one call has been parked at the same time, you need to
specify the parking zone number to retrieve the required call.
To set
PT/PS
During a conversation
(Call Park)
Press Call Park.
PT/PS
During a conversation
parking zone no. Specified
TRANSFER
5
2
OR
C.Tone
Auto
Press TRANSFER.
Enter
52.
Enter a specified parking
zone number (2 digits) or press
to park at an idle parking zone
automatically.
On-hook.
If you hear a busy tone, enter another
parking zone number or press again.
SLT
During a conversation
5
Press Recall/
hookswitch.
Enter
2
52.
parking zone no.
C.Tone
Enter a specified parking
zone number (2 digits).
If you hear a busy tone, enter another
parking zone number.
Call Park Retrieve
PT/PS
(Call Park)
Press a flashing Call Park.
40
Operating Manual
On-hook.
1.3 Telephone Features and Operation
PT/SLT/PS
5
Off-hook.
Enter
stored parking
zone no.
2
52.
C.Tone
Talk.
Dial stored parking
zone number (2 digits).
•
•
If a call is parked automatically, confirm the parking zone number on the display.
If a call is not retrieved within a specified time, you will hear an alarm as a reminder (Call
Park Recall).
If an outside call is not answered within a specified time, it is automatically disconnected.
•
If you hear a reorder tone when retrieving a parked call, there is no held call. Confirm the
stored parking zone number.
After you park a call, you can perform other operations.
•
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Call Park button or Call Park (Automatic Park Zone) button.
1.3.9
–
–
Call Pickup
Call Pickup
Call Pickup Deny
Call Pickup
You can answer an incoming call that is ringing at another extension or group from your phone without
leaving your desk.
The following types of pickup are available:
Group Call Pickup: Picks up a call within your group.
Directed Call Pickup: Picks up a specified extension's call.
PT/SLT/PS
4
0
group no.
Group
OR
C.Tone
4
Off-hook.
1
extension no.
Directed
Enter 40 and then group number (2 digits).
Or enter 41 and then extension number.
Talk.
Operating Manual
41
1.3 Telephone Features and Operation
•
If you receive a call waiting tone, you can ask a third party to pick up your second call with
Directed Call Pickup.
Call Pickup Deny
You can deny or allow other people to pick up your calls.
PT/SLT/PS
1
7
2
0
0
Off-hook.
Enter
720.
Deny
OR
Allow
C.Tone
On-hook.
Enter 1 to deny
or 0 to allow.
1.3.10 Call Splitting
When talking to one party while the other party is on hold, you can swap the calls back and forth
(alternately).
To alternate between the parties leaving one party on hold temporarily
PT/PS
During a conversation
(DSS)
TRANSFER
TRANSFER
OR
C.Tone
extension no.
Press
TRANSFER.
Press DSS or dial the other
party's extension number.
Talk to the
other party.
Press
TRANSFER.
Talk to the
original party.
The other party will be on hold.
42
Operating Manual
1.3 Telephone Features and Operation
SLT
During a conversation
extension no.
C.Tone
Press Recall/
hookswitch.
Dial the other party's
extension number.
Talk to the
other party.
Press Recall/
hookswitch.
Talk to the
original party.
The other party will be on hold.
To leave the conversation and then let the two parties talk
PT/PS
During a conversation
(DSS)
TRANSFER
TRANSFER
OR
C.Tone
Press
TRANSFER.
extension no.
Press DSS or dial the other
party's extension number.
Talk to the
other party.
Press
TRANSFER.
On-hook.
SLT
During a conversation
OR
OR
extension no.
C.Tone
Press Recall/
hookswitch.
Dial the other party's
extension number.
Talk to the
other party.
Press Recall/
hookswitch.
On-hook.
Operating Manual
43
1.3 Telephone Features and Operation
1.3.11 Call Transfer
–
–
Transferring to an Extension in the PBX
Transferring to an Outside Party Using the PBX Service
•
•
You can transfer a held call without talking, and go on-hook even if the transferred party does
not answer the call. (Not available for SIP Extensions.)
If a transferred call is not answered within a specified time, it will ring at a preprogrammed
extension, if set, or at your extension again. If you are off-hook at that time, you will hear an
alarm tone. If an outside call is not answered within a specified time, it is automatically
disconnected.
For users of SIP Extensions:
– Even if your telephone has a TRANSFER button, you cannot use it to transfer calls.
Please make sure to use the HOLD button.
– The transfer operation for SIP Extension users may differ from the steps in this section,
and may vary depending on the type of telephone being used.
Transferring to an Extension in the PBX
To transfer
PT/PS
During a conversation
(DSS)
TRANSFER
C.Tone
OR
extension no.
On-hook.
Talk.
Press TRANSFER.
Press DSS or dial
extension number.
This step can be omitted.
SLT
During a conversation
extension no.
C.Tone
Press Recall/
hookswitch.
Dial extension
number.
Talk.
This step can be omitted.
44
Operating Manual
On-hook.
1.3 Telephone Features and Operation
SIP Extn.
During a conversation
HOLD
extension no.
Press HOLD.
Dial
extension number.
•
•
•
*
Talk.
On-hook.
* Instead of going on-hook, if you press the HOLD button once or twice (depending on the
telephone being used), you can return to the held call, and the call with the transferred party
will be disconnected.
When you are not at your desk or not in the office and receive a forwarded outside call, for
example on your cellular phone, it is possible to transfer the call to an extension in the PBX
by pressing # + desired extension number (if enabled through system programming).
For the transfer operation using an SDN button, refer to "1.3.49 PDN (Primary Directory
Number)/SDN (Secondary Directory Number) Extension".
To transfer with one touch (One-touch Transfer)
PT/PS
During a conversation with an outside party
(DSS)
Press DSS.
Talk.
On-hook.
This step can be omitted.
•
System programming is required to use the One-touch Transfer feature during a conversation
with an extension.
Transferring to an Outside Party Using the PBX Service
Some extensions may be restricted from performing this feature.
Operating Manual
45
1.3 Telephone Features and Operation
PT/PS
During a conversation
TRANSFER
CO line
C.Tone
Press TRANSFER.
Seize CO line.
outside
phone no.
Dial outside
phone number.
Talk.
On-hook.
Talk.
On-hook.
SLT
During a conversation
CO line
C.Tone
Press Recall/
hookswitch.
Seize CO line.
outside
phone no.
Dial outside
phone number.
SIP Extn.
During a conversation
HOLD
CO line
Press HOLD.
Seize CO line.
•
•
•
*
outside
phone no.
Dial outside phone
number.
Talk.
* Instead of going on-hook, if you press the HOLD button once or twice (depending on the
telephone being used), you can return to the held call, and the call with the transferred party
will be disconnected.
Time limit
Both the caller and the transferred party will hear an alarm tone fifteen seconds before a
specified time period, and the call will be disconnected.
To return to the held call before the destination answers, press the TRANSFER button,
corresponding CO, ICD Group, or INTERCOM button, or the hookswitch.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Direct Station Selection (DSS) button.
46
On-hook.
Operating Manual
1.3 Telephone Features and Operation
1.3.12 CALL WAITING FEATURES
–
–
–
Call Waiting (BSS [Busy Station Signaling])
Answering Call Waiting in the PBX
Answering Call Waiting from the Telephone Company
Call Waiting (BSS [Busy Station Signaling])
For a caller
You can inform a busy extension user that your call is waiting.
To send a call waiting
PT/SLT/PS
While hearing a busy tone
1
Enter 1.
•
•
Depending on the type of the other party's telephone, you may be able to talk to the other
party using the speaker and the microphone (Off-hook Call Announcement [OHCA]), or you
can send a call announcement through the handset (Whisper OHCA), if they are having
another conversation using the handset. For more details on each feature, refer to "1.3.13 Call
Waiting Tone", "1.3.45 OHCA (Off-hook Call Announcement)", or "1.3.76 Whisper OHCA".
Depending on system programming and the called extension's setting, a call waiting tone may
be sent automatically without performing the operation above. For details, refer to "Automatic
Call Waiting" in "3.1.2 Personal Programming".
For a called extension
A call waiting notification is sent to the busy extension user to notify him or her that a new incoming call is
waiting. The extension can then answer the second call by either disconnecting the current call or placing it
on hold.
One of the following notification methods can be assigned for each extension, depending on the type of
telephone being used. (Default: Call Waiting Tone)
•
Call Waiting Tone: A call waiting tone is heard through the built-in speaker of PT or handset of
SLT (→ 1.3.13 Call Waiting Tone).
•
Off-hook Call Announcement (OHCA): The caller's voice is heard through the built-in speaker
(→ 1.3.45 OHCA (Off-hook Call Announcement)).
•
Whisper OHCA: The caller's voice is heard through the handset (→ 1.3.76 Whisper OHCA).
Operating Manual
47
1.3 Telephone Features and Operation
Answering Call Waiting in the PBX
During a conversation, a call waiting tone or voice announcement through the speaker or the handset occurs
when an outside call has been received or another extension is letting you know a call is waiting. You must
activate this feature to use it. (Default: Call Waiting Tone)
You can answer the second call by disconnecting (1) or holding (2) the current call.
1. To disconnect the current call and then talk to the new party
PT/SLT/PS
While hearing a tone
On-hook.
Talk to the
new party.
Off-hook.
2. To hold the current call and then talk to the new party
PT/PS
While hearing a tone
(CO)
OR
(ICD Group)
HOLD
OR
(PDN)
OR
Press HOLD.
Talk to the
new party.
(SDN)
OR
INTERCOM
Disregard this step if both
parties are extensions.
Press CO, ICD Group,
PDN, SDN, or INTERCOM.
SLT
While hearing a tone
0
5
C.Tone
Press Recall/hookswitch.
48
Operating Manual
Enter
50.
Talk to the
new party.
1.3 Telephone Features and Operation
After talking to the new party (second call), you can disconnect (2.1) or hold (2.2) it and then retrieve
the first call.
2.1 To disconnect the second call and then talk to the original party
PT/PS
During a conversation
(CO)
OR
(ICD Group)
OR
(PDN)
OR
On-hook.
Off-hook.
Talk to the
original party.
(SDN)
OR
INTERCOM
Press CO, ICD Group, PDN,
SDN, or INTERCOM.
PT/SLT/PS
During a conversation
0
5
C.Tone
On-hook.
Off-hook.
Enter
50.
Talk to the
original party.
Operating Manual
49
1.3 Telephone Features and Operation
2.2 To hold the second call and then talk to the original party
After holding it, you can talk to the original party. Then, you can disconnect it and then talk to the new party
again.
PT/PS
During a conversation
(CO)
OR
(ICD Group)
OR
HOLD
(PDN)
OR
Press HOLD.
Talk to the
original party.
(SDN)
OR
INTERCOM
Press CO, ICD Group,
PDN, SDN, or INTERCOM.
(CO)
Disregard this step if both
parties are extensions.
OR
(ICD Group)
OR
(PDN)
OR
(SDN)
OR
On-hook.
INTERCOM
Off-hook.
Talk to the
new party.
Press CO, ICD Group,
PDN, SDN, or INTERCOM.
SLT
During a conversation
0
5
C.Tone
Press Recall/hookswitch.
Enter
Talk to the
original party.
50.
0
5
C.Tone
On-hook.
50
Operating Manual
Off-hook.
Enter
50.
Talk to the
new party.
1.3 Telephone Features and Operation
•
•
Depending on the type of your telephone, you may be able to talk to the other party using
the speaker and the microphone (Off-hook Call Announcement [OHCA]), or you can receive
an announcement through the handset (Whisper OHCA), if you are having a conversation
using the handset. For more details on each feature, refer to "1.3.13 Call Waiting Tone",
"1.3.45 OHCA (Off-hook Call Announcement)", or "1.3.76 Whisper OHCA".
The caller's name or number is displayed for five seconds in fifteen second intervals while
waiting to be answered.
Customizing Your Phone
•
3.1.2 Personal Programming—Call Waiting Tone Type Selection
If you select "Tone 1", you will hear the same tone for Call Waiting from an outside party
and an extension. If you select "Tone 2", you will hear different tones for Call Waiting from
an outside party and an extension.
15 s
Default
(Tone 1)
Special Tones
(Tone 2)
5s
OR
Answering Call Waiting from the Telephone Company
This is an optional telephone company service. You can receive a call waiting tone with the caller's name or
telephone number information. For details, consult your telephone company.
PT/PS
While hearing a tone
FLASH/
RECALL
PT/SLT/PS
While hearing a tone
TRANSFER
OR
OR
OR
6
0
(EFA)
Press FLASH/RECALL
or EFA.
•
•
•
Press TRANSFER
or Recall/hookswitch.
Enter
60.
To return to the original party, repeat the operation.
In this case, the FLASH/RECALL button on proprietary telephones must be set to External
Feature Access (EFA) mode through system programming.
The caller's telephone number will not be displayed on telephones or wireless phones
connected to SLT ports.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit an External Feature Access (EFA) button.
Operating Manual
51
1.3 Telephone Features and Operation
1.3.13 Call Waiting Tone
During a conversation, you can be informed of a waiting call with a call waiting tone through the built-in
speaker of your PT or the handset of your SLT.
To set/cancel for intercom calls (Manual Call Waiting)
PT/SLT/PS
0
7
3
1
1
Off-hook.
Enter
No call
OR
Tone
C.Tone
On-hook.
Enter 0 or 1.
731.
To set/cancel for outside calls (Automatic Call Waiting)
PT/SLT/PS
0
7
3
2
1
Off-hook.
52
Enter
732.
No tone
OR
Tone
Enter 0 or 1.
C.Tone
On-hook.
•
To change the tone from a PT, refer to "3.1.2 Personal Programming".
•
For information about answering a waiting call, refer to "1.3.12 CALL WAITING FEATURES".
Operating Manual
1.3 Telephone Features and Operation
1.3.14 Character Entry
You can enter the following characters. The tables show you the characters available for each button. Table
1 or Table 2 can be programmed.
Table 1 (Standard mode)
Operating Manual
53
1.3 Telephone Features and Operation
Table 2 (Option mode)
<Example> To enter "Ann"
n
A
2
6
(5 times)
n
6
OR
(5 times)
FWD/DND
Notes
•
•
To move the cursor to the left, press
•
To move the cursor to the right, press
. When entering two or more characters that use the
same button consecutively (e.g. "G" and "I"), you must press this button or the FWD/DND button
after entering the first character.
If the SELECT button is pressed, the characters for each button will be displayed in reverse order.
To toggle between Table 1 and Table 2 when using a KX-T7600 series DPT, press the leftmost soft
button.
•
•
54
To erase the character on the cursor, press CLEAR.
Operating Manual
.
1.3 Telephone Features and Operation
1.3.15 Conference
–
–
Conference
Leaving Three-party Conference
Conference
You can add one or more parties to your conversation.
To establish a conference call
PT/PS
During a conversation
CONF
OR
TRANSFER
C.Tone
Press CONF
or TRANSFER.
desired
phone no.
CONF
C.Tone
Talk to the
new party.
Dial desired
phone number.
Talk with
multiple parties.
Press CONF.
Seize CO line before
dialing outside phone number.
PT/PS
During a conversation
TRANSFER
Press TRANSFER.
desired
phone no.
Dial desired
phone number.
TRANSFER
Talk to the
new party.
Press TRANSFER.
3
C.Tone
Enter 3.
Seize CO line before
dialing outside phone number.
Talk with multiple parties.
Operating Manual
55
1.3 Telephone Features and Operation
SLT
During a conversation
desired
phone no.
Press Recall/
hookswitch.
3
Talk to the
new party.
Dial desired
phone number.
Press Recall/
hookswitch.
C.Tone
Enter 3.
Seize CO line before
dialing outside phone number.
Talk with multiple parties.
To establish a conference call when receiving a call from an outside party during a two-party
conversation
PT/PS
(CO)
During a conversation
OR
(ICD Group)
(CO)
CONF
OR
OR
HOLD
(PDN)
OR
(PDN)
OR
TRANSFER
OR
(SDN)
Press HOLD.
(SDN)
Talk to the
new party.
Press flashing CO,
PDN, or SDN.
OR
Press CONF
or TRANSFER.
INTERCOM
Press flashing CO, ICD Group,
PDN, SDN, or INTERCOM
corresponding to the
original party.
CONF
OR
TRANSFER
3
Talk to the
original party.
56
Operating Manual
Press CONF, or press TRANSFER
and then enter 3.
C.Tone
Talk with
multiple parties.
1.3 Telephone Features and Operation
To add four or more parties to a conference
PT/PS
During a conversation
To continue
desired
phone no.
CONF
Press CONF.
Dial desired
phone number.
CONF
C.Tone
Talk.
Press CONF.
Talk.
Seize CO line before
dialing outside phone number.
To add another party on hold to a conference
PT/PS
During a 3- to 7-party conference
(CO)
OR
CONF
CONF
(ICD Group)
C.Tone
OR
(PDN)
Press CONF.
OR
Press CONF.
Talk with
multiple parties.
(SDN)
Press flashing CO, ICD Group,
PDN, or SDN corresponding to
the party on hold.
To talk to two parties alternately in a three-party conversation
PT/PS
During a conversation
TRANSFER
Press TRANSFER.
Operating Manual
57
1.3 Telephone Features and Operation
SLT
During a conversation
Press Recall/hookswitch.
To disconnect one party and then talk to the other in a three-party conversation
PT/PS
During a conversation
(CO)
OR
FLASH/
RECALL
TRANSFER
(ICD Group)
*
OR
(PDN)
OR
Press TRANSFER once
or twice to establish a
conversation with the
party to be disconnected.
The other party will be put on hold.
•
•
•
•
•
(SDN)
Press
FLASH/RECALL.
INTERCOM
Press flashing CO, ICD Group,
PDN, SDN, or INTERCOM
corresponding to the original party.
* In this case, the FLASH/RECALL button on a proprietary telephone must be set to Flash/
Recall mode through system programming.
During a three-party conversation, pressing the TRANSFER button or Recall/hookswitch
alternates between the two other parties in the conversation.
You can have a conference with a maximum of eight parties (comprising intercom or CO lines)
simultaneously.
During a conversation involving four or more parties, you cannot disconnect one party and
maintain the conversation with the other parties.
SIP Extensions cannot originate a conference call, but can be added as a member.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Conference button.
58
Talk.
OR
Operating Manual
1.3 Telephone Features and Operation
Leaving Three-party Conference
The person who originated a conference with two other parties can leave the conference, and allow the
other parties to continue the conversation.
To leave a conference involving at least one other extension
PT/SLT/PS
During a three-party conference
On-hook.
To leave a conference involving two outside parties
PT/PS
During a three-party conference
TRANSFER
Press TRANSFER.
On-hook.
SLT
During a three-party conference
Press Recall/hookswitch.
•
On-hook.
To leave a conference call involving two outside parties and have the conversation continue,
your extension must be enabled to transfer calls to CO lines through COS programming.
Operating Manual
59
1.3 Telephone Features and Operation
1.3.16 Conference, Unattended
The person who originated a conference can leave the conference, and allow the other
parties to continue the conversation.
To leave a conference
PT/PS
During a 3- to 7-party conference
CONF
Press CONF.
On-hook.
To return while others are talking
PT/PS
INTERCOM
OR
OR
(ICD Group)
(CO)
OR
(PDN)
OR
(SDN)
Press flashing green CO, ICD Group, PDN, SDN, or INTERCOM.
To complete a conversation
PT/PS
During a conversation
On-hook.
•
Time limit
Both parties will hear an alarm tone before a specified timeout. The originating extension user
will hear an alarm tone before timeout. The call is disconnected when the timer runs out
unless the originating extension returns to the conference.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Conference button.
60
Operating Manual
1.3 Telephone Features and Operation
1.3.17 Data Line Security
You can protect the line against audible notification tones, such as a call waiting tone during a conversation.
Set this feature if your extension has a data communication device, such as a computer or fax machine
connected to ensure secure data transmission.
To set/cancel
PT/SLT/PS
1
7
3
0
0
Off-hook.
Enter
730.
Set
OR
Cancel
C.Tone
Enter 1 to set
or 0 to cancel.
On-hook.
1.3.18 DISA (Direct Inward System Access)
–
Calling through DISA
Calling through DISA
When outside callers access extensions in the PBX, a
prerecorded message greets the caller and gives information
about how to access an extension. You do not need the
operator's assistance.
You may be able to access system features or call an outside
party with your password depending on the security mode.
Operating Manual
61
1.3 Telephone Features and Operation
To call an extension
From Outside Telephone
PIN: Personal Identification Number
In No Security Mode/Trunk Security Mode
DISA
phone no.
desired
extension no.
R.B.Tone &
DISA message
Off-hook.
Dial DISA
phone number.
Dial desired
extension number.
In All Security Mode*
DISA
phone no.
Off-hook.
your
extension no.
4
R.B.Tone &
DISA message
Dial DISA
phone number.
7
verification
code
Enter
47.
extension PIN
OR
verification code PIN
Enter extension PIN or
verification code PIN
(max.10 digits).
62
Operating Manual
C.Tone &
D.Tone
OR
desired
extension no.
Dial desired
extension number.
Dial your extension number,
or enter and then verification
code.
1.3 Telephone Features and Operation
To call an outside party
From Outside Telephone
PIN: Personal Identification Number
In No Security Mode
DISA
phone no.
Off-hook.
outside
phone no.
R.B.Tone &
DISA message
Dial outside
phone number.
Dial DISA
phone number.
Seize CO line before dialing
outside phone number.
In Trunk Security Mode/All Security Mode *
DISA
phone no.
Off-hook.
your
extension no.
4
R.B.Tone &
DISA message
Dial DISA
phone number.
Enter
7
OR
verification
code
47.
Dial your extension number,
or enter and then verification
code.
extension PIN
OR
outside
phone no.
C.Tone &
D.Tone
verification code PIN
Enter extension PIN or
verification code PIN
(max.10 digits).
Dial outside
phone number.
Seize CO line before dialing
outside phone number.
•
* Callers from preprogrammed outside numbers can access the PBX through DISA without a
password (extension PIN/verification code PIN) (DISA Automatic Walking COS).
To retry
From Outside Telephone
To dial a different number during a conversation with an outside party or
while hearing the ringback, reorder, or busy tone
DISA
message
Enter
.
phone no.
Dial phone number.
Dial a line access number as the first
digit when calling an outside party.
Operating Manual
63
1.3 Telephone Features and Operation
•
WARNING
There is a risk that fraudulent telephone calls will be made using the CO-to-CO Line
Call feature of DISA.
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a)
b)
c)
d)
•
•
Enabling DISA security (CO Line Security or All Security).
Keeping your passwords (verification code PIN/extension PIN) secret.
Selecting complex, random PINs that cannot be easily guessed.
Changing PINs regularly.
Time limit
Both parties will hear an alarm tone fifteen seconds before the specified time limit. To extend,
press any dial button except .
If Built-in Automated Attendant service is set, you can access the desired extension
simply by pressing a single digit (0–9) from the options given the prerecorded message.
1.3.19 DND (Do Not Disturb)
–
–
–
DND (Do Not Disturb)
DND Override
Switching FWD/DND Status Using Fixed FWD/DND Button
DND (Do Not Disturb)
You can set this feature to prevent incoming calls from ringing at your extension. This can be useful, for
example, when you are in a meeting or busy.
To set/cancel
PT/SLT/PS
0
Both Calls
OR
7
1
1
OR
2
Off-hook.
Enter
•
64
71.
Outside Calls
Intercom Calls
Enter 0 to 2 as you desire.
1
Set
OR
0
Cancel
Enter 1 to set
or 0 to cancel.
C.Tone
On-hook.
When using a proprietary telephone, you can set or cancel DND by pressing the FWD/DND
button (fixed button) instead of " 710".
Operating Manual
1.3 Telephone Features and Operation
•
•
The FWD/DND button light shows the current status as follows:
Off: Both features are not set.
Flashing red slowly: FWD mode
Red on: DND mode
The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting
Mode. Ask your manager what mode your system is in if you are not sure.
(1) When in FWD/DND Cycle Switch Mode:
Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting as
shown below:
FWD
DND
Off
(2) When in FWD/DND Setting Mode:
Pressing the FWD/DND button (fixed button) while in idle status allows you to switch the
FWD/DND status and set the FWD destination (refer to "Switching FWD/DND Status
Using Fixed FWD/DND Button").
•
•
•
•
•
•
Note
A FWD/DND button (customized button) is always in FWD/DND Cycle Switch Mode: the
mode cannot be changed.
If your extension has set this feature, a calling extension will hear DND tone.
If this feature is set, the Call Forwarding (FWD) feature does not work.
Specified extensions can override this feature and call DND extensions (DND Override).
When using a SIP Extension, you cannot set/cancel the DND feature at your extension.
However, this feature is available if set through system programming.
When making a call using an SDN button to a PDN extension with DND set, this feature will
temporarily be deactivated.
When intercom calls are set to be handled differently from outside calls (DND set/cancel), we
recommend establishing buttons for both FWD/DND—Outside calls and FWD/DND—
Intercom calls, because:
a) the light patterns of the FWD/DND—Both calls button (including FWD/DND button [fixed
button]) will indicate the setting for either outside calls or intercoms calls, but not both.
Note
The DND icon on PS display reflects the setting for outside calls only.
b) pressing the FWD/DND—Both calls button (including FWD/DND button [fixed button])
will not change the FWD or DND mode for intercom calls and outside calls separately.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit FWD/DND (Both calls, Outside calls, Intercom calls) buttons.
Operating Manual
65
1.3 Telephone Features and Operation
DND Override
The preprogrammed extension can call someone who has set the DND feature.
To call
PT/SLT/PS
1
extension no.
DND Tone
Off-hook.
R.B.Tone
Talk.
Enter 1.
Dial extension
number.
Switching FWD/DND Status Using Fixed FWD/DND Button
Using a proprietary telephone (PT), you can easily switch the FWD/DND status for outside/
intercom calls without clearing any FWD destination that was set previously.
To switch the FWD/DND status for outside calls
PT
While on-hook (when in FWD/DND Setting Mode)
FWD/DND
FWD/DND
The current FWD/DND status
for outside calls is displayed.
Press the fixed
FWD/DND button.
Press the fixed FWD/DND
button again to switch the status.
To switch the FWD/DND status for intercom calls
PT
While on-hook (when in FWD/DND Setting Mode)
FWD/DND
2
Press the fixed
FWD/DND button.
66
Operating Manual
Enter 2.
The current FWD/DND status
for intercom calls is displayed.
FWD/DND
Press the fixed FWD/DND
button again to switch
the status.
1.3 Telephone Features and Operation
To set and clear FWD/DND for outside/intercom calls
PT
While on-hook (when in FWD/DND Setting Mode)
Outside Calls*
1
FWD/DND
AUTO DIAL
OR
Press the fixed
FWD/DND button.
0
STORE
Intercom Calls
2
Enter 1 or 2.
FWD/DND off
Press STORE.
AUTO DIAL
OR
1
STORE
DND on
Press STORE
to set.
Enter 0 or 1.
A confirmation tone will
be heard.
•
* This step can be omitted.
1.3.20 Door Open
A preprogrammed extension can open a door from the extension.
From a preprogrammed extension
PT/SLT/PS
5
Off-hook.
Enter
5
55.
doorphone no.
C.Tone
Enter doorphone
number (2 digits).
On-hook.
From any extension while talking to the doorphone
PT/SLT/PS
5
Enter 5.
C.Tone
On-hook.
Operating Manual
67
1.3 Telephone Features and Operation
•
The door open will be triggered for a specified time period.
1.3.21 Doorphone Call
Preprogrammed extensions or an outside party can receive a call from a doorphone, and talk to the person
through the doorphone.
To call from the doorphone
Doorphone
C.Tone
Talk.
Press doorphone
button.
To answer a call from the doorphone
PT/SLT/PS/SIP Extn.
Off-hook.
To call the doorphone
PT/SLT/PS/SIP Extn.
3
Off-hook.
•
68
Enter
1
31.
doorphone no.
C.Tone
Enter doorphone
number (2 digits).
Talk.
If no one answers a doorphone call within a specified time period, the call is canceled.
Operating Manual
1.3 Telephone Features and Operation
1.3.22 EFA (External Feature Access)
You can access special features (e.g., Call Waiting) offered by a host PBX or telephone company. This
feature is only effective for an outside call.
<Example> To hold the current call and then talk to the new party
PT/PS
SLT
While hearing a tone
While hearing a tone
FLASH/
RECALL
OR
desired service
code
(EFA)
6
0
desired service
code
OR
TRANSFER
6
0
Press FLASH/RECALL or EFA.
Or press TRANSFER and
then enter 60.
•
Enter desired
service code.
Press Recall/
hookswitch.
Enter
60.
Enter desired
service code.
In this case, the FLASH/RECALL button on a proprietary telephone must be set to External
Feature Access (EFA) mode through system programming.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit an External Feature Access (EFA) button.
1.3.23 Executive Busy Override
–
–
Executive Busy Override
Executive Busy Override Deny
Executive Busy Override
A preprogrammed extension can call someone who is busy on the telephone and establish a three-party
conversation.
Operating Manual
69
1.3 Telephone Features and Operation
To join an intercom call
PT/SLT/PS
Party joining the call
extension no.
OR
3
(PDN)
OR
Off-hook.
B. Tone
C.Tone
Talk.
Enter 3.
(SDN)
Dial extension number, or
press red PDN or SDN.
A three-party conversation
is now established.
Parties in the conversation
During a conversation
C.Tone
Talk.
To join an outside call
PT/PS
Party joining the call
(CO)
3
OR
(PDN)
B. Tone
C.Tone
OR
Off-hook.
(SDN)
Enter 3.
Talk.
Press red CO, PDN or SDN.
A three-party conversation
is now established.
Parties in the conversation
During a conversation
C.Tone
Talk.
•
•
•
70
To join another conversation, you must have Executive Busy Override enabled at your
extension through COS programming.
It is possible for an originating extension to leave a three-party conversation with an outside
party and let the two other parties talk by simply going on-hook.
Executive Busy Override is not available when making a call to a SIP Extension.
Operating Manual
1.3 Telephone Features and Operation
For the originating extension
To talk to each party alternately
PT/PS
During a conversation
To continue
TRANSFER
Talk to the
other party.
Press TRANSFER.
Executive Busy Override Deny
A preprogrammed extension user can prevent his calls from being interrupted by another extension user
(Default: Allow other users to interrupt calls).
To set
PT/SLT/PS
1
7
3
3
0
Off-hook.
Enter
Prevent
OR
733.
Allow
C.Tone
On-hook.
Enter 1 to prevent
or 0 to allow.
1.3.24 Extension Dial Lock
You can lock your extension so that other users cannot make unauthorized outside calls.
This feature is also known as Electronic Station Lockout.
To lock
PT/SLT/PS
7
7
1
C.Tone
Off-hook.
Enter
77.
Enter 1.
On-hook.
Operating Manual
71
1.3 Telephone Features and Operation
To unlock
PT/SLT/PS
PIN: Personal Identification Number
7
Off-hook.
•
•
•
Enter
7
77.
0
extension PIN
Enter 0.
Enter extension PIN
(max. 10 digits).
C.Tone
On-hook.
If you forget the extension PIN or cannot unlock your extension, consult your manager.
The manager can clear your extension PIN, or unlock your extension. Then, you can set the
new PIN and unlock your extension by entering it.
If your extension is locked by this feature, it cannot perform the following operations:
– Making outside calls
– Changing the call forwarding destination
If you do not set extension PIN, you cannot lock and unlock your extension.
To make an outside call while your extension is locked
PT/SLT/PS
PIN: Personal Identification Number
4
Enter
Off-hook.
7
47.
your
extension no.
extension no.
extension PIN
Dial your
extension number.
Enter extension PIN
(max. 10 digits).
If the wrong extension PIN is
entered, you hear an alarm tone.
•
desired
phone no.
extension no.
C.Tone &
D.Tone
Dial desired
phone number.
Seize CO line before entering
outside phone number.
After you make an outside call, Extension Dial Lock is automatically activated again.
1.3.25 Extension Feature Clear
You can reset the settings of the following features on your extension to the default settings with one
operation.
This feature is also known as Station Program Clear.
Features
Hot Line*
Default Setting
Off
Message Waiting—(All the messages that have been left by other extension users) Off
72
Call Pickup Deny
Allow
Call Forwarding (FWD)*
Off
Operating Manual
1.3 Telephone Features and Operation
Features
Default Setting
Absent Message
Off
Paging Deny
Allow
Timed Reminder
Cleared
Do Not Disturb (DND)*
Off
Call Waiting*
Enable—Tone
Executive Busy Override Deny
Allow
BGM
Off
Data Line Security
Off
Paralleled Telephone
The telephone in parallel
rings.
Log-in/Log-out
Log-in
* These features may not be reset, depending on system programming.
To reset
PT/SLT/PS
7
Enter
Off-hook.
•
9
0
C.Tone
790.
On-hook.
After performing Extension Feature Clear, the setting of Call Waiting becomes "Enable—
Tone". In this case, dial tone 2 will be heard when you go off-hook.
1.3.26 Extension PIN (Personal Identification Number)
You can assign a password to each extension.
The following features require an extension PIN.
1. Screening calls (1.3.69 Voice Mail Features—LCS (Live Call Screening)])
2. Prohibiting other people from seeing your personal speed dialing directory, call log, and SVM log
(Display Lock)
3. Using the same settings as your extension at other extensions (1.3.74 Walking Extension)
4. Remote Control Operation (1.3.73 Walking COS)
5. Extension Dial Lock Clear
Operating Manual
73
1.3 Telephone Features and Operation
To set
PT/SLT/PS
PIN: Personal Identification Number
Off-hook.
7
9
Enter
799.
1
9
extension PIN
Enter 1.
#
same
extension PIN
#
Enter #.
Enter same extension
PIN (max. 10 digits).
Enter #.
Enter extension
PIN (max. 10 digits).
C.Tone
On-hook.
To cancel
PT/SLT/PS
Off-hook.
PIN: Personal Identification Number
7
9
Enter
799.
9
0
stored
extension PIN
Enter 0.
Enter stored
extension PIN.
C.Tone
On-hook.
•
WARNING
There is a risk that fraudulent telephone calls will be made if a third party discovers
your password (extension PIN).
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a) Keeping your PIN secret.
b) Selecting a complex, random PIN that cannot be easily guessed.
c) Changing your PIN regularly.
•
•
•
74
Valid numbers for an extension PIN are "0" through "9".
If the wrong extension PIN is entered for a preprogrammed number of times, the PIN is
locked.
If you forget your extension PIN or your extension PIN is locked, your manager can clear the
extension PIN and extension PIN lock.
Operating Manual
1.3 Telephone Features and Operation
1.3.27 External Relay
Preprogrammed extensions can switch on a relay (e.g., alarm) connected to the PBX.
To switch on the relay
PT/SLT/PS
5
Enter
Off-hook.
•
6
56.
relay no.
C.Tone
Enter relay number
(2 digits).
On-hook.
The relay will be switched off after a specified time period.
1.3.28 External Sensor
Preprogrammed extensions can receive an alert call from an external sensor (e.g., security alarm)
connected to the PBX.
To answer a sensor call
PT/SLT/PS
D.Tone
Off-hook.
•
On-hook.
If you do not answer a sensor call within a specified time period, the sensor call will stop.
Operating Manual
75
1.3 Telephone Features and Operation
1.3.29 FWD (Call Forwarding)
–
–
FWD (Call Forwarding)
FWD/DND Settings Using Fixed FWD/DND Button
FWD (Call Forwarding)
You can have your incoming calls forwarded to a specified
destination.
All Calls:
All calls are forwarded. Preset extensions may also forward
from their own receiving group.
Busy:
All calls are forwarded when your extension is busy.
No Answer:
All calls are forwarded when you do not answer the call
within a specified time period.
Busy/No Answer (BSY/NA):
All calls are forwarded when you do not answer within a
specified time period or when your extension is busy.
Follow Me (From):
If you fail to set the above-mentioned "All Calls" to forward
before you leave your desk, you can set the same feature
from the destination extension.
•
•
Incoming calls can be forwarded up to four times.
When using a SIP Extension, you cannot set/cancel the FWD feature at your extension.
However, this feature is available if a forward destination is set through system programming.
•
You can set the floating extension number of a voice mail group or the SVM card as a forward
destination.
You can set your cellular phone as the forward destination.
Boss & Secretary feature
The extension which has been set as the destination can call the forwarding extension.
•
•
<Example>
Call
Forwarding
extension
76
Operating Manual
Forward
set
destination
1.3 Telephone Features and Operation
To set/cancel
PT/SLT/PS
0
Both Calls
OR
1
7
1
Outside Calls
OR
Intercom Calls
2
Off-hook.
Enter
71.
Enter 0 to 2 as
you desire.
0
Cancel
2
All Calls
3
Busy
4
No Answer
5
Busy/No Answer
Enter required
number.
For "Cancel", go on-hook
directly after entering 0.
destination
extension no.
OR
outside
CO line
phone no.
access no.
(max. 32 digits)
Enter destination extension number.
Or enter CO line access number
and then outside phone number.
C.Tone
Enter #.
On-hook.
To set Follow Me from another extension
PT/SLT/PS
0
Both Calls
OR
1
1
7
2
Off-hook.
Enter
your
extension no.
Dial your
extension number.
•
Outside Calls
OR
71.
7
8
Follow Me
Follow Me Cancel
Intercom Calls
Enter 0 to 2 as
you desire.
Enter 7 or 8.
C.Tone
On-hook.
It is not possible to set Follow Me from a SIP Extension. However, it is possible to set it on a
SIP Extension from another extension that is not a SIP Extension.
Operating Manual
77
1.3 Telephone Features and Operation
•
When using a proprietary telephone, you can set or cancel Call Forwarding by pressing the
FWD/DND button (fixed button) instead of " 710".
To set the timer for "No Answer" and "Busy/No Answer"
PT/SLT/PS
7
1
Enter
Off-hook.
time
3
C.Tone
713.
On-hook.
Enter time
(seconds [2 digits]).
Call Forwarding (FWD) for your Incoming Call Distribution Group
PT/SLT/PS
ICD Group: Incoming Call Distribution Group
4
Both Calls
1
OR
1
7
5
Outside Calls
OR
6
Off-hook.
Enter
71.
Set
OR
0
Cancel
Intercom Calls
Enter 4 to 6 as
you desire.
Enter 1 to set
or 0 to cancel.
OR
outside
CO line
phone no.
access no.
(Max. 32 digits)
•
•
78
Enter ICD Group
extension number.
For "Cancel", go on-hook
directly after entering ICD
Group extension number.
destination
extension no.
Enter destination extension number.
Or enter CO line access number
and then outside phone number.
ICD Group
extension no.
C.Tone
Enter #.
On-hook.
The FWD/DND button light shows the current status as follows:
Off: Both features are not set.
Flashing red slowly: FWD mode
Red on: DND mode
The Group FWD button light shows the current status as follows:
Off: No set
Flashing red slowly: FWD mode
Operating Manual
1.3 Telephone Features and Operation
•
The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting
Mode. Ask your manager what mode your system is in if you are not sure.
(1) When in FWD/DND Cycle Switch Mode:
Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting as
shown below:
FWD
DND
Off
(2) When in FWD/DND Setting Mode:
Pressing the FWD/DND button (fixed button) while in idle status allows you to switch the
FWD/DND status and set the FWD destination (refer to "FWD/DND Settings Using Fixed
FWD/DND Button").
•
•
Note
A FWD/DND button (customized button) is always in FWD/DND Cycle Switch Mode: the
mode cannot be changed.
Transferred outside calls are also forwarded to the destination assigned for outside calls.
When intercom calls are set to be handled differently from outside calls (forwarding type,
forward destination), we recommend establishing buttons for both FWD/DND—Outside calls
and FWD/DND—Intercom calls, and/or Group FWD—Outside calls and Group FWD—
Intercom calls, because:
a) the light patterns of the FWD/DND—Both calls button (including FWD/DND button [fixed
button]) and the Group FWD—Both calls button will indicate the setting for either outside
calls or intercom calls, but not both.
Note
The FWD icon on PS display reflects the setting for outside calls only.
b) pressing the FWD/DND—Both calls button (including FWD/DND button [fixed button]) or
the Group FWD—Both calls button will not change the FWD or DND mode for intercom
calls and outside calls separately.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit FWD/DND (Both calls, Outside calls, Intercom calls) buttons, or Group
FWD (Both calls, Outside calls, Intercom calls) buttons.
FWD/DND Settings Using Fixed FWD/DND Button
Using a proprietary telephone (PT), you can easily switch the FWD/DND status, and set the
forward destination for outside/intercom calls with the FWD/DND button (fixed button). It is
also possible to set outside telephone numbers (e.g., your cellular phone) as forward
destinations for up to 4 Virtual PSs* in an Incoming Call Distribution (ICD) group, to ring
together with other ICD group members for calls to the group.
The following settings are available:
•
•
•
Switching the FWD/DND status and setting FWD destination for outside/intercom calls
Timer for "No Answer" and "Busy/No Answer"
Forwarding status (on/off) and outside destinations to ring in parallel for outside calls for up to 4
virtual PSs in an ICD group
Operating Manual
79
1.3 Telephone Features and Operation
* Virtual PS
A virtual PS is a dedicated
extension number assigned to
a non-existent portable station
(PS) to allow access to outside
destinations such as a cellular
phone.
3 Talk
2 Forward to
outside destination
1 Dials 301
Extn. 101
Virtual PS
(Extn. No. 301)
To switch FWD/DND status for outside calls
PT
While on-hook (when in FWD/DND Setting Mode)
FWD/DND
FWD/DND
The current FWD/DND status
for outside calls is displayed.
Press the fixed
FWD/DND button.
Press the fixed FWD/DND
button again to switch the status.
To switch FWD/DND status for intercom calls
PT
While on-hook (when in FWD/DND Setting Mode)
FWD/DND
2
Press the fixed
FWD/DND button.
•
80
Enter 2.
The current FWD/DND status
for intercom calls is displayed.
FWD/DND
Press the fixed FWD/DND
button again to switch
the status.
When you switch the FWD/DND status, any FWD destination that was set previously is not
cleared.
Operating Manual
1.3 Telephone Features and Operation
To set and clear FWD/DND for outside/intercom calls
PT
While on-hook (when in FWD/DND Setting Mode)
1
FWD/DND
Outside Calls*
AUTO DIAL
Intercom Calls
STORE
OR
2
Press the fixed
FWD/DND button.
Enter 1 or 2.
0
1
Press STORE.
FWD/DND off
DND on
Enter 0 or 1.
OR
2
3
4
5
FWD–All Calls
FWD–Busy
FWD–No Answer
FWD–Busy/No Answer
AUTO DIAL
destination
extension no.
STORE
OR
CO line
access no.
outside
phone no.
Press STORE
to set.
(max. 32 digits)
Enter 2 to 5.
•
Enter destination extension number,
or CO line access number and then
outside phone number.
A confirmation tone will
be heard.
* This step can be omitted.
To set the timer for "No Answer" and "Busy/No Answer"
PT
While on-hook (when in FWD/DND Setting Mode)
AUTO DIAL
FWD/DND
time
3
*
STORE
Press the fixed
FWD/DND button.
Enter 3.
Press STORE.
AUTO DIAL
STORE
Enter time
(seconds [0–120]).
Press STORE
to set.
A confirmation tone will
be heard.
•
* You can enter the time as a 1–3 digit number. For example, 15 seconds can be entered as
"15" or "015".
Operating Manual
81
1.3 Telephone Features and Operation
To set forwarding status and outside destinations to ring in parallel for outside calls to an ICD
group
PT
While on-hook (when in FWD/DND Setting Mode)
4
5
6
7
FWD/DND
Press the fixed
FWD/DND button.
Virtual PS 1
Virtual PS 2
Virtual PS 3
Virtual PS 4
AUTO DIAL
STORE
Enter 4 to 7.
Press STORE.
To cancel ringing
0
FWD off
Enter 0.
OR
AUTO DIAL
To set ringing
1
FWD–All Calls
STORE
CO line
access no.
outside
phone no.
(max. 32 digits)
Enter 1.
•
•
Enter CO line access number
and then outside phone number.
Press STORE
to set.
A confirmation tone will
be heard.
Only one extension assigned as member 1 in each ICD group can perform the settings for
virtual PSs.
It is possible to switch the forwarding status (on/off) of a virtual PS by entering the number (4–
7) of that extension, then pressing the fixed FWD/DND button, instead of pressing the AUTO
DIAL/STORE button.
1.3.30 Hands-free Answerback
You can answer an incoming call without going off-hook as soon as the line is connected.
When an intercom call arrives, you will hear the caller talking without the phone ringing.
When an outside call arrives, you will hear the caller talking after a preprogrammed
number of rings. Hands-free Answerback for outside calls requires System Programming.
82
Operating Manual
1.3 Telephone Features and Operation
To set/cancel
PT
While on-hook
AUTO ANS
MUTE
Press
AUTO ANS.
•
•
The AUTO ANS button light shows the current status as follows:
Off: Not set
Red on: Set
PS users: Refer to "Operating Instructions" for PS.
1.3.31 Hands-free Operation
You can have a conversation in hands-free mode using the SP-PHONE button.
To make/answer a call
PT
SP-PHONE
Press SP-PHONE.
•
When performing hands-free operation:
– If it is difficult to hear the other party's voice,
Increase the volume using the Navigator Key, Jog Dial, or Volume Key.
– If the other party has difficulty hearing you,
Decrease the volume.
– If the other party reports that your voice echoes,
Use the telephone in a room that has curtains, carpeting or both.
– If parts of the conversation cannot be heard,
If you and the other party speak at the same time, parts of your conversation may be lost.
To avoid this, try to speak alternately.
Operating Manual
83
1.3 Telephone Features and Operation
1.3.32 Headset Operation
–
–
Headset Operation
Answer/Release Button
Headset Operation
You can have a conversation using a headset.
In this case, you must select "Headset on" in programming mode or set the Headset button
on (red) in advance.
This feature is also known as Handset/Headset Selection.
To talk using the headset
PT
SP-PHONE
Press SP-PHONE.
To use the handset during a conversation using the headset
PT
Off-hook.
To talk in hands-free mode during a conversation using the headset
PT
(Headset)
Press red Headset.
•
84
The Headset button light shows the current status as follows:
Off: Headset mode off
Red on: Headset mode on
Operating Manual
1.3 Telephone Features and Operation
•
For KX-NT300 series users:
•
With the KX-NT300 series, you can use a Bluetooth wireless headset registered on your
extension as a headset.
•
Operating Distance
Please keep KX-NT300 series IP-PTs with connected Bluetooth Modules, 3 m (9 ft 10 in)
or more apart from each other. Also, if a Bluetooth headset is in use near a KX-NT300
series IP-PT with a connected Bluetooth Module, other than the one it is registered to,
noise may be heard. Move away from the IP-PT and closer to the one it is registered to,
to improve the signal.
•
Noise
Signals are transmitted between this module and the Bluetooth headset using radio
waves. For maximum distance and noise free operation, it is recommended that the
module is situated away from electrical appliances such as faxes, radios, personal
computers, or microwaves.
•
Systems using the 2.4 GHz ISM (Industrial, Scientific and Medical) band may
interfere with this product. Examples of such systems are cordless telephones,
wireless LAN, Home RF, microwave ovens and other ISM devices. These systems
may cause minor noise.
Customizing Your Phone
•
3.1.2 Personal Programming—Headset Operation
Select the equipment to use.
•
3.1.4 Customizing the Buttons
Create or edit a Headset button.
Answer/Release Button
Customized Answer and Release buttons can make using a headset much easier. You can
answer incoming calls or disconnect the line with these buttons.
Some DSS Consoles have fixed ANSWER and RELEASE buttons.
To answer
PT
(Answer)
Press Answer.
Talk.
Operating Manual
85
1.3 Telephone Features and Operation
To transfer a call
PT
During a conversation
(DSS)
TRANSFER
OR
The called
party answers.
(Release)
desired
phone no.
Press TRANSFER.
Press Release.
Press DSS or dial desired
phone number.
Seize CO line before
dialing outside phone number.
To talk to a waiting caller
PT
While hearing a call waiting tone
(Answer)
Press Answer.
Talk.
To transfer an outside call to an extension with a one-touch operation
PT
During a conversation
(DSS)
The called
party answers.
Press DSS.
The other party is placed on hold and the
destination extension is called immediately.
86
Operating Manual
(Release)
Press Release.
1.3 Telephone Features and Operation
To end a conversation
PT
During a conversation
(Release)
Press Release.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit an Answer button or a Release button.
1.3.33 HOSPITALITY FEATURES
In a hotel-type environment, an extension assigned as a hotel operator can be used to view and set the
check-in/check-out status of each guest room extension. This allows the hotel operator to manage guests
and rooms with just a telephone. In addition, the hotel operator can set timed reminders remotely for guest
rooms.
Features
Description
Room Status Control
An extension assigned as a hotel operator can set the check-in/checkout status of rooms remotely.
(→ 1.3.59 Room Status Control)
Remote Wake-up Call
A hotel operator can set a timed reminder for a room remotely.
(→ 1.3.72 Wake-up Call)
1.3.34 Hot Line
You can make an outside call simply by going off-hook if you have preprogrammed your phone.
This feature is also known as Pickup Dialing.
To store a phone number
PT/SLT/PS
7
Off-hook.
Enter
4
740.
0
2
Enter 2.
desired
phone no.
Enter desired
phone number
(max. 32 digits).
C.Tone
Enter #.
On-hook.
Enter CO line access number
before outside phone number.
Operating Manual
87
1.3 Telephone Features and Operation
To set/cancel
PT/SLT/PS
1
7
Enter
Off-hook.
4
0
740.
Set
OR
0
Cancel
C.Tone
Enter 1 to set
or 0 to cancel.
On-hook.
To dial
PT/SLT/PS
Off-hook.
•
•
•
To call another party, dial the desired party's phone number before the preprogrammed
number is dialed.
You should assign the intercom line as the seized line when going off-hook. (Preferred Line
Assignment—Outgoing)
It is possible to increase the delay before Hot Line is activated through system programming.
This can be useful if you require more time after going off-hook to dial another telephone
number or extension number.
Customizing Your Phone
•
3.1.2 Personal Programming—Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.
1.3.35 ICD GROUP FEATURES
An incoming call distribution (ICD) group is a group of extensions assigned through system programming to
receive calls (for example, as a call center). The PBX has several features that support using extensions in
ICD groups, as follows:
88
Features
Description
Log-in/Log-out
You can log in to or out of an ICD group, to control whether you receive
calls from the group.
(→ 1.3.38 ICD Group Features—Log-in/Log-out)
Supervisory Features
An extension assigned as a supervisor (supervisor extension) can
monitor and control the status of each member within the ICD group,
using a 6-line display PT.
(→ 1.3.41 ICD Group Features—Supervisory)
Operating Manual
1.3 Telephone Features and Operation
Features
Description
Manual Queue Redirection
(Hurry-up Transfer)
You can forward the longest waiting call in the queue of calls to the ICD
group to a preprogrammed destination manually.
(→ 1.3.40 ICD Group Features—Manual Queue Redirection)
Call Forwarding (FWD) for
your ICD Group
You can set a forward destination for your ICD group.
(→ Call Forwarding (FWD) for your Incoming Call Distribution Group)
1.3.36 ICD Group Features—Call Log History for ICD Group
An extension assigned as a supervisor (supervisor extension) can confirm the incoming
call log for the incoming call distribution (ICD) group.
To perform this operation, the supervisor has to enter incoming call queue monitoring
mode first.
To enter incoming call queue monitoring mode
6-Line Display PT
7
Off-hook.
Enter
3
ICD Group
extension no.
9
739.
C.Tone
Enter ICD Group
extension number.
Group Monitor On
On-hook.
To confirm the Call Log History
6-Line Display PT
While the display is in incoming call queue monitoring mode
JAN.31
08:13AM
601:Sales Section
Waiting Calls Now:
Max. Waiting Time:
EXIT
LOG
Press "LOG".
FRI
00006
02'18
SPRVS
Since
JAN.29
Total Calls
Overflow Calls
Lost Calls
Average Waiting
EXIT
09:10AM
00996
00131
00039
01'06
:
:
:
:
CLEAR
Confirm the Call Log History.
Operating Manual
89
1.3 Telephone Features and Operation
To clear Call Log History
6-Line Display PT
While the Call Log History is displayed
Since
JAN.29
Total Calls
Overflow Calls
Lost Calls
Average Waiting
EXIT
09:10AM
00996
00131
00039
01'06
:
:
:
:
CLEAR
Press "CLEAR".
•
If the accumulated data exceeds the maximum number that can be displayed (99999), "****"
is shown on the display. To reinitialize the display, clear the Call Log History.
For information about other supervisory features, refer to "1.3.41 ICD Group Features—
Supervisory".
•
1.3.37 ICD Group Features—Incoming Call Queue Monitor
An extension assigned as a supervisor (supervisor extension) can monitor the status of
waiting calls to be answered in the queue for an incoming call distribution (ICD) group.
To monitor the waiting call status
6-Line Display PT
7
Off-hook.
Enter
3
9
739.
ICD Group
extension no.
C.Tone
Enter ICD Group
extension number.
JAN.31
08:13AM
601:Sales Section
Waiting Calls Now:
Max. Waiting Time:
Group Monitor On
On-hook.
EXIT
LOG
FRI
00006
02'18
SPRVS
Confirm the status of queued calls.
•
90
If an ICD group has an overflowed call, the display shows the status automatically.
Operating Manual
1.3 Telephone Features and Operation
•
For information about other supervisory features, refer to "1.3.41 ICD Group Features—
Supervisory".
1.3.38 ICD Group Features—Log-in/Log-out
You can control your status in an incoming call distribution
(ICD) group. When in the Log-out mode, incoming calls to
the group will not ring at your extension. When you return,
calls will again ring at your extension. (Default: Log-in)
Even if your extension is logged-in, you can have a
specified time period (wrap-up time) when you will not
receive calls after completing a previous call. This time can
be used for you to write a report and so on.
You can also manually select "Not Ready" mode to
temporarily leave an ICD group.
Log-out
Log-in
Talk.
Ready
Wrap-up
Not Ready
To set Log-in/Log-out
ICD Group: Incoming Call Distribution Group
PT/SLT/PS
0
7
3
6
1
Off-hook.
Enter
ICD Group
extension no.
Log-out
OR
736.
Log-in
Enter 0 or 1.
Specified
OR
C.Tone
All
Enter ICD Group
extension number or
On-hook.
.
Operating Manual
91
1.3 Telephone Features and Operation
ICD Group: Incoming Call Distribution Group
PT/PS
While on-hook
ICD Group
extension no.
(Log-in/Log-out)
Specified
OR
All
Press Log-in/Log-out.
Enter ICD Group extension
number or .
PT/PS
While on-hook
(Log-in/Log-out
of a Specified Group)
Press Log-in/Log-out of a Specified Group.
To enter/leave Not Ready mode
PT/SLT/PS
1
7
3
5
0
Off-hook.
Enter
735.
Not Ready
OR
Ready
Enter 1 or 0.
C.Tone
On-hook.
To set/cancel Not Ready mode or to leave Wrap-up mode (To enter Ready mode)
PT/PS
While on-hook
(Wrap-up)
Press red or flashing red Wrap-up.*
92
Operating Manual
1.3 Telephone Features and Operation
•
•
•
•
•
•
•
* The status will be as follows:
Ready
Not Ready
Not Ready
Ready
Wrap-up
Not Ready
The Log-in/Log-out of a specified group button light shows the current status as follows:
Off: Log-in mode
Red on: Log-out mode
The Wrap-up button alternates the setting of Wrap-up mode, Not Ready mode or Ready
mode.
The Wrap-up button light shows the current status as follows:
Off: Ready mode
Red on: Not Ready mode
Flashing red: Wrap-up mode
In Wrap-up mode/Not Ready mode, your extension does not receive calls through any group,
even if it belongs to multiple groups.
The last remaining logged-in extension may not be allowed to log out, depending on system
programming.
The Supervisor extension can control the Log-in/Log-out status of other extensions.
For more information, refer to "1.3.39 ICD Group Features—Log-in/Log-out Monitor and
Remote Control".
For information about other ICD group features, refer to "1.3.35 ICD GROUP FEATURES".
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Log-in/Log-out button, a Log-in/Log-out of a specified group button or a
Wrap-up button.
1.3.39 ICD Group Features—Log-in/Log-out Monitor and Remote
Control
An extension assigned as a supervisor (supervisor extension) can monitor the Log-in/Logout status of incoming call distribution (ICD) group members with the lights of
corresponding DSS buttons. The supervisor extension can change the Log-in/Log-out
status of an extension by pressing the corresponding DSS button.
To perform this operation, the supervisor has to enter incoming call queue monitoring
mode first.
Operating Manual
93
1.3 Telephone Features and Operation
To enter incoming call queue monitoring mode
6-Line Display PT
7
Off-hook.
Enter
3
9
739.
ICD Group
extension no.
C.Tone
Enter ICD Group
extension number.
Group Monitor On
On-hook.
To monitor the Log-in/Log-out status
6-Line Display PT
While the display is in incoming call queue monitoring mode
JAN.31
08:13AM
601:Sales Section
Waiting Calls Now:
Max. Waiting Time:
EXIT
LOG
FRI
00006
02'18
SPRVS
Press "SPRVS".
•
While in Log-in/Log-out monitoring mode, the lights of DSS buttons for the ICD group
members indicate their status as follows:
Off: Out of the ICD group.
Green on: Log-in mode (Ready). The extension user is ready to answer calls.
Flashing green: Log-in mode (Not Ready). The extension user is not ready to answer calls.
Red on: Log-out mode.
To change the Log-in/Log-out mode
6-Line Display PT
While monitoring the Log-in/Log-out status
(DSS)
Press desired DSS.
94
Operating Manual
1.3 Telephone Features and Operation
•
Depending on the current status of the ICD group member, pressing the DSS button changes
the status as follows:
Log-in mode (Not Ready) Log-in mode (Ready)
Log-in mode (Ready) Log-out mode
Log-out mode
Log-in mode (Ready)
•
For information about other supervisory features, refer to "1.3.41 ICD Group Features—
Supervisory".
1.3.40 ICD Group Features—Manual Queue Redirection
When your incoming call distribution (ICD) group is busy and other outside calls arrive, the
arriving calls are put in a waiting queue.
Extensions can check the status of the queue with the Hurry-up button light, and forward
the longest waiting call in the queue to a preset destination manually.
This feature is also known as Hurry-up Transfer.
To forward the waiting call
PT/PS
(Hurry-up)
Press red or flashing red Hurry-up.
•
The Hurry-up button light shows the current status as follows:
Off: No waiting call.
Red on: Some calls are waiting.
Flashing red: The number of calls exceeds the manual queue redirection level.
•
For information about other ICD group features, refer to "1.3.35 ICD GROUP FEATURES".
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Hurry-up button.
Operating Manual
95
1.3 Telephone Features and Operation
1.3.41 ICD Group Features—Supervisory
An extension assigned as a supervisor (supervisor extension) can monitor and control the status of other
members in an Incoming Call Distribution (ICD) group using a 6-line display PT, as follows:
Features
Description
Incoming Call Queue
Monitor
The supervisor extension can monitor the status of calls waiting in the
queue to be answered.
(→ 1.3.37 ICD Group Features—Incoming Call Queue Monitor)
The supervisor extension can monitor the Log-in/Log-out status of the
ICD group members with the lights of corresponding DSS buttons. The
Log-in/Log-out Monitor and supervisor extension can change their Log-in/Log-out status by
pressing the corresponding DSS button.
Remote Control
(→ 1.3.39 ICD Group Features—Log-in/Log-out Monitor and Remote
Control)
Call Log History
The supervisor extension can confirm the incoming call log for the ICD
group.
(→ 1.3.36 ICD Group Features—Call Log History for ICD Group)
Using these features, for example, if extension 101 is logged out but the user is at his extension, and
Incoming Call Queue Monitor shows that a call is waiting in the queue, the supervisor extension can change
the status of extension 101 to Log-in. The waiting call will then be automatically directed to that extension.
The following chart shows the flow of supervisory displays and access operations:
96
Operating Manual
1.3 Telephone Features and Operation
Initial Display
JAN.31
PROG
08:10AM
INFO
RING
FRI
MENU
739
"EXIT"
ICD Group
extension
no.
Incoming Call
Queue Monitor
JAN.31
08:10AM
FRI --- Date and time
601:Sales Section
--- Floating extension number/name of ICD group
Waiting Calls Now: 00006 --- The number of queued calls
Max. Waiting Time: 02'18 --- The longest queuing time
EXIT
LOG
SPRVS
"SPRVS"
"LOG"
Call Log History
Since JAN.29
Total Calls
Overflow Calls
Lost Calls
Average Waiting
EXIT
09:10AM
00996
00131
00039
01'06
CLEAR
:
:
:
:
"EXIT"
"EXIT"
--- Monitoring starting date and time
--- Total number of incoming calls
--- Total number of overflowed calls
--- The number of lost calls
--- Average queuing time
Log-in/Log-out Monitor
JAN.31
08:10AM
FRI
601:Sales Section
Waiting Calls Now: 00006
Max. Waiting Time: 02'18
EXIT
With
The lights of DSS buttons for the ICD group members
indicate their Log-in/Log-out status as follows:
OFF: Out of the ICD group.
Green on: Log-in mode (ready to answer calls).
Flashing green: Log-in mode (not ready to answer calls).
Red on: Log-out mode.
•
For information about other ICD group features, refer to "1.3.35 ICD GROUP FEATURES".
1.3.42 Message Waiting
For a caller
When the called extension is busy or does not answer your call, you
can leave a notification so that the called party may call you back.
For a called extension
As a message receiver, the Message button light or Message/
Ringer Lamp lets you know that a call has been received. If you
receive notification, you can call back the caller by a simple
operation.
Operating Manual
97
1.3 Telephone Features and Operation
For a caller
To leave a message waiting indication
PT/SLT/PS
When the called extension is busy or does not answer
MESSAGE
OR
C.Tone
4
On-hook.
Press MESSAGE
or enter 4.
To leave/cancel a message waiting indication
PT/SLT/PS
PT and SLT
1
7
0
0
Off-hook.
•
Enter
70.
Cancel
Enter 1 to leave
or 0 to cancel.
desired
extension no.
Enter desired
extension number.
C.Tone
On-hook.
When making a call to SIP Extensions, you cannot leave a message waiting notification. If
you perform the operation to leave a message waiting notification to a SIP Extension, you will
hear a reorder tone.
For a called extension
To check the left message and call back
PT/PS
While on-hook
MESSAGE
Press MESSAGE
until the desired
extension appears.
98
Leave
OR
Operating Manual
Off-hook.
Talk.
1.3 Telephone Features and Operation
To call back
PT/SLT/PS
MESSAGE
OR
7
Press MESSAGE or enter
Off-hook.
2
0
Talk.
70 and then 2.
To clear message waiting indications left on your extension
PT/SLT/PS
7
Enter
Off-hook.
•
•
•
•
•
•
0
70.
0
Enter 0.
your
extension no.
Dial your
extension number.
C.Tone
On-hook.
The Message button light or Message/Ringer Lamp shows the current status as follows:
Off: No message
Red on: You have a message.
The display shows the messages starting with the most recent call.
At a called extension, the MESSAGE button allows you to clear message waiting indications
if you do not want to call the callers back. To clear, press the MESSAGE button and then press
the soft button.
On your PT, you can establish one or more Message for Another Extension buttons.
These buttons can accept the message waiting notification of other extensions or various
incoming call distribution groups.
In other words, you can monitor the message waiting notifications of other telephones.
A single line telephone extension user will receive a special dial tone as message waiting
notification when going off-hook.
The message waiting lamp of a single line telephone can also let you know that you have a
message in the same way as the Message button.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Message button or Message for Another Extension button.
1.3.43 Mute
You can disable the microphone or the handset to consult privately with others in the room
while listening to the other party on the phone through the speaker or the handset.
Operating Manual
99
1.3 Telephone Features and Operation
To set/cancel
PT
During a conversation
AUTO ANS
MUTE
OR
VOICE CALL
MUTE
Press MUTE.
•
•
The AUTO ANS/MUTE or VOICE CALL/MUTE button light shows the current status as
follows:
Off: Normal
Flashing red: Mute
If mute is used during OHCA, it will become Handset Mute.
1.3.44 Off-hook Monitor
You can let other people in the room listen to the conversation through the speaker while
continuing the conversation using the handset.
To set/cancel
PT
During a conversation using the handset
SP-PHONE
Press SP-PHONE.
•
•
The SP-PHONE button light shows the current status as follows:
Off: The voice is heard through the handset.
On: The voice is heard through the speaker and the handset.
This feature is only available with certain proprietary telephones, and requires system
programming.
1.3.45 OHCA (Off-hook Call Announcement)
During a conversation, you can be informed of a waiting call with a voice announcement. You can hear the
caller’s voice through the built-in speaker, and talk to the caller while the current call is continued using the
handset.
100
Operating Manual
1.3 Telephone Features and Operation
To set/cancel for intercom calls (Manual Call Waiting)
PT
0
7
Off-hook.
•
•
Enter
3
1
731.
No call
OR
2
OHCA
C.Tone
Enter 0 or 2.
On-hook.
•
OHCA is only available with certain digital proprietary telephones.
OHCA is not available for outside calls; only call waiting tone can be set (refer to "1.3.13 Call
Waiting Tone").
A PDN extension can only receive OHCA or Whisper OHCA from the corresponding SDN
extension. When a call is made from another extension, a PDN extension will receive a call
waiting tone. (→ 1.3.49 PDN (Primary Directory Number)/SDN (Secondary Directory
Number) Extension)
•
For information about answering a waiting call, refer to "1.3.12 CALL WAITING FEATURES".
1.3.46 One-touch Dialing
You can store a phone number into the flexible button for one-touch operation.
PT/PS
(One-touch
Dialing)
Off-hook.
Press One-touch
Dialing.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a One-touch Dialing button, store the desired phone number or feature
number.
Operating Manual
101
1.3 Telephone Features and Operation
1.3.47 Paging
–
–
–
Group Paging
Paging and then Transferring a Call
Paging Deny
Group Paging
You can make a voice announcement to proprietary telephones or external speakers or both in the preset
group simultaneously. A person who has been paged can answer the page at any extension.
To page
PT/SLT/PS/SIP Extn.
3
Off-hook.
•
Enter
paging group
no.
3
33.
Dial paging group
number (2 digits).
Wait for an
answer
C.Tone
Announce.
Talk.
If the group which you paged is already being used for paging, you hear a busy tone.
To answer
PT
4
Off-hook.
•
•
•
102
Enter
3
43.
C.Tone
Talk.
The following are extensions that cannot receive a paging announcement:
–
Portable station
–
Single line telephone
–
Proprietary telephone that is ringing or busy
–
Proprietary telephone in Paging Deny mode
–
Proprietary telephone in DND mode
System programming may be required for some IP-PT users to receive paging
announcements.
Even if the announcement is not paging your extension, you can answer it, if it is paging your
group.
Operating Manual
1.3 Telephone Features and Operation
Paging and then Transferring a Call
You can transfer a call after making paging announcements.
PT/SLT/PS
During a conversation
TRANSFER
OR
OR
3
Press TRANSFER or
Recall/hookswitch.
Enter
paging group
no.
3
33.
C.Tone
Announce.
Dial paging group
number (2 digits).
The other party is
placed on hold.
Wait for an
answer
Talk.
On-hook.
The held party and the paged extension are
connected and start a conversation.
•
After you go on-hook, the caller can talk to the person who answers the page.
Paging Deny
You can set your extension not to receive paging announcements.
PT
1
7
2
1
0
Off-hook.
Enter
721.
Deny
OR
Allow
Enter 1 or 0.
C.Tone
On-hook.
1.3.48 Paralleled Telephone
A digital proprietary telephone extension user can choose whether the single line
telephone connected in parallel will ring or not, when an incoming call is received.
(Default: Ring)
Operating Manual
103
1.3 Telephone Features and Operation
DPT
1
3
9
0
Enter
Off-hook.
•
•
39.
Ring
OR
No ring
Enter 1 to ring
or 0 not to ring.
C.Tone
On-hook.
Even if "No ring" is selected, calls can be made and answered on the single line telephone
by lifting the handset.
If you go off-hook while your paralleled telephone is in use, the call will switch over to you.
1.3.49 PDN (Primary Directory Number)/SDN (Secondary
Directory Number) Extension
Primary Directory Number (PDN) buttons and Secondary Directory Number (SDN)
buttons are useful when extension users will handle calls for other extensions. For
example, a secretary or multiple secretaries can handle calls and check the call status of
a boss or multiple bosses. The functions of PDN and SDN buttons are as follows:
PDN button: This button can be used to make and receive all calls (including both outside
and intercom calls). Having multiple PDN buttons allows multiple calls to be queued at the
extension. Extensions that have a PDN button are called PDN extensions.
SDN button: The light of an SDN button displays the current call status of the registered
extension, similar to a DSS button. In addition, this button can be used to perform the
following operations:
•
call the PDN extension (SDN Direct Dial)
•
answer calls ringing at the PDN extension
•
hold calls and retrieve calls held by the PDN extension (Call Hold and Call Hold
Retrieve)
•
transfer calls to the PDN extension (Call Transfer Using SDN Button)
Extensions that have an SDN button are called SDN extensions.
•
•
•
•
•
The extension that is registered as the destination of an SDN button must have at least one
PDN button.
One extension can have up to 8 PDN buttons.
An extension can have only one SDN button for each PDN extension.
A PDN extension can only receive OHCA or Whisper OHCA from the corresponding SDN
extension. When a call is made from another extension, a PDN extension will receive a call
waiting tone.
The button light of each PDN/SDN button shows the current status as follows:
Light Pattern
Off
104
Operating Manual
PDN Button Status
SDN Button Status
The PDN extension is idle.
1.3 Telephone Features and Operation
Light Pattern
PDN Button Status
SDN Button Status
Green on
The extension is on a call using the
PDN button.
The extension is on a call using an
SDN button.
Flashing
green slowly
A call is on hold at the PDN extension A call answered with the SDN button
(Regular Hold).
is on hold (Regular Hold).
Flashing
green
moderately
A call is on hold temporarily or on
Exclusive Call Hold.
A call answered with the SDN button
is on hold temporarily or on Exclusive
Call Hold.
Flashing
The PDN extension is receiving an
green rapidly incoming call.
An SDN extension is receiving a Hold
Recall or callback ringing from a call
answered with the SDN button.
Red on
A corresponding SDN extension is
using the line.
The corresponding PDN extension or
another corresponding SDN
extension is using the line.
Flashing red
slowly
A corresponding SDN extension is
holding a call.
Another corresponding SDN
extension, or the PDN extension
itself, is holding a call.
Flashing red
rapidly
The PDN extension is receiving an
incoming call to an incoming call
distribution (ICD) group.
The corresponding PDN extension is
receiving an incoming call.
SDN Direct Dial
Using an SDN button, you can easily call the corresponding PDN extension. SDN buttons are in one of two
modes depending on system programming, and the operation procedure differs as follows:
Enhanced DSS Key Mode
PT/PS
(SDN)
Off-hook.
Talk.
Press corresponding
SDN.
Standard SDN Key Mode
PT/PS
(SDN)
Off-hook.
Press corresponding
SDN.
D.Tone
(SDN)
Press the SDN again.
Talk.
Operating Manual
105
1.3 Telephone Features and Operation
•
•
•
When performing SDN Direct Dial to call the corresponding PDN extension, the SDN button
light shows the current status of the destination extension as follows:
Green on: You are using the line.
Red on: The line is being used. (The PDN extension, or another SDN extension when
multiple extensions have SDN buttons to a same PDN extension, is using the line.)
Even if a PDN extension has set Do Not Disturb (DND), you can call the extension as normal
by pressing the SDN button.
When an SDN button is in Standard SDN Key Mode, you can dial a telephone number while
hearing a dial tone, instead of pressing the SDN button again. Depending on system
programming, your call will be made using either your normal calling privileges (Class of
Service) or those of the corresponding PDN extension (SDN Walking COS).
Call Hold and Call Hold Retrieve
You can put calls answered with a PDN or SDN button on hold normally (1.3.6 Call Hold).
You can also retrieve a call held at your extension/another extension with a simple operation, regardless of
the call type.
Call Hold Retrieve
PT/PS
To retrieve a call at the holding extension
(PDN)
OR
(SDN)
Off-hook.
Press flashing green
PDN or SDN.
Talk.
To retrieve a call from another extension—only Regular Hold
(PDN)
OR
(SDN)
Off-hook.
106
Press flashing red
PDN or SDN.
Talk.
•
If a call is not retrieved within a specified time, you will hear an alarm as a reminder (Hold
Recall).
If an outside call is not answered within a specified time, it is automatically disconnected.
•
If Automatic Call Hold has been preprogrammed, you can put the current call on hold
automatically by pressing another PDN button to make or answer another call.
Operating Manual
1.3 Telephone Features and Operation
Call Transfer Using SDN Button
You can transfer a call to a PDN extension with a simple operation using a corresponding SDN button.
To transfer a call to a PDN extension
PT/PS
During a conversation
*
(SDN)
Talk.
Press SDN.
On-hook.
This step can be omitted.
•
•
System programming is required to use this feature during a conversation with an extension.
* When an SDN button is in Standard SDN Key Mode, you have to press the SDN button twice
to transfer the call, unless you used that SDN button to answer an incoming call.
Customizing Your Phone
•
3.1.2 Personal Programming—Preferred Line Assignment—Incoming
Select the seized line when going off hook.
•
3.1.2 Personal Programming—Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.
•
3.1.4 Customizing the Buttons
Create or edit a Primary Directory Number (PDN) or Secondary Directory Number (SDN)
button.
1.3.50 Printing Message
You can record a variety of information from your extension using up to 8 preprogrammed messages.
Message information from all extensions is recorded with the PBX. For example, it is possible to use this
feature as a time card by selecting preprogrammed "sign in" and "sign out" messages.
In a hotel-type environment, this feature can be used to record room information from a room extension.
For a list of preprogrammed messages, consult your dealer.
To record
PT/SLT
Off-hook.
7
6
Enter
761.
1
message no.
parameter
*
C.Tone
Enter message
number (1–8).
Enter parameter
if required.
Enter #.
On-hook.
Operating Manual
107
1.3 Telephone Features and Operation
•
* Depending on the content of the selected message, you may be required to enter a numeric
parameter, such as a price or time. Enter the correct number of characters as required for the
message. For information about required parameters, consult your dealer.
<Example>
If "Snack %%.%%" has been programmed as message number 1 (for recording charges for
room snacks consumed), hotel employees would enter data as in the example below using
the room extension:
761
•
1
0300
message no.
parameter
(Snack charge)
#
When a preprogrammed message is selected, detailed information is recorded automatically,
as shown below:
Date
Ext
Time
02/02/00 10:45AM
1234
CO
Dial Number
Snack 03.00
1.3.51 Privacy Release
You can let a third party join your current outside call and establish a three-party
conversation. You can also leave the conversation and then let the two other parties talk.
To let a third party join your conversation and establish a three-party conversation
PT/PS
Your extension (on the outside call)
Wait for an answer.
To prolong, press
the S-CO again.
(S-CO)
C.Tone
Press green
S-CO.
Other extension
Talk.
The S-CO button will flash
at all extensions that have
that S-CO button.
A three-party conversation
is now established.
(S-CO)
Press the flashing
S-CO within 5 seconds.
•
•
108
C.Tone
Off-hook.
Talk.
Only an S-CO button can be used for this operation.
You can leave a three-party conversation and let the two other parties talk by simply going onhook.
Operating Manual
1.3 Telephone Features and Operation
1.3.52 Private Network Features—CLIP (Calling Line
Identification Presentation)
When making a call through a private network, you can present your preprogrammed telephone number to
the called party.
You can select the telephone number sent, either the number of the line used or the number assigned to
your extension.
If you select "Public", the calling/called party sees the number of the line used (subscriber's number).
If you select "Your extension", they see the telephone number assigned on your extension.
To show either the number assigned to the CO line or your extension
PT/SLT/PS
1
7
2
2
Enter
Off-hook.
•
7 2.
Public
OR
Your extension
C.Tone
Enter 1 for public or 2
for your extension.
On-hook.
If you use the ICD Group button to make a call to the other party, the telephone number
assigned to the ICD group will be used.
1.3.53 Private Network Features—CLIR (Calling Line
Identification Restriction)
When making a call through a private network, you can select whether the called party can see your
telephone number or not.
To show/prevent
PT/SLT/PS
0
7
1
1
Off-hook.
•
Enter
7 1.
Show
OR
Prevent
Enter 0 to show
or 1 to prevent.
C.Tone
On-hook.
You can change the mode by pressing a preset CLIR button while on-hook.
The CLIR button light shows the current status as follows:
Off: shows your telephone number.
Red on: prevents your telephone number being displayed.
Operating Manual
109
1.3 Telephone Features and Operation
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Calling Line Identification Restriction (CLIR) button.
1.3.54 Private Network Features—COLP (Connected Line
Identification Presentation)
When receiving a call through a private network, you can present your preprogrammed telephone number
to the calling party.
You can select the telephone number sent, either the number of the line used or the number assigned to
your extension.
If you select "Public", the calling/called party sees the number of the line used (subscriber's number).
If you select "Your extension", they see the telephone number assigned on your extension.
To show either the number assigned to the CO line or your extension
PT/SLT/PS
1
7
2
2
Enter
Off-hook.
7 2.
Public
OR
Your extension
Enter 1 for public or 2
for your extension.
C.Tone
On-hook.
1.3.55 Private Network Features—COLR (Connected Line
Identification Restriction)
When receiving a call through a private network, you can select whether the caller can see your telephone
number or not.
To show/prevent
PT/SLT/PS
0
7
Off-hook.
•
110
Enter
0
7 0.
Show
OR
1
Prevent
Enter 0 to show
or 1 to prevent.
C.Tone
On-hook.
You can change the mode by pressing a preset COLR button while on-hook.
The COLR button light shows the current status as follows:
Off: shows your telephone number.
Red on: prevents your telephone number being displayed.
Operating Manual
1.3 Telephone Features and Operation
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Connected Line Identification Restriction (COLR) button.
1.3.56 Private Network Features—TIE Line Access
You can access extensions connected to other PBXs in a private network.
To call
PT/SLT/PS/SIP Extn.
extension no.
*
OR
7
Off-hook.
•
private phone no.
*
Dial extension number or
enter 7 and then dial private phone number.
Talk.
* Which type of telephone number must be entered depends on the settings of your PBX.
To call with one touch
PTPT/PS
and SLT
(NDSS)
Off-hook.
•
Press NDSS.
Talk.
To start monitoring another PBX extension after customizing an NDSS button, go offhook, press the NDSS button, and go on-hook.
The NDSS button light will show the current status as follows:
Off: The extension is idle.
Red on: The extension is busy.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Network Direct Station Selection (NDSS) button.
Operating Manual
111
1.3 Telephone Features and Operation
1.3.57 Quick Dialing
You can make a call simply by pressing the preprogrammed number for quick dialing.
PT/SLT/PS/SIP Extn.
quick dialing no.
Off-hook.
•
Dial quick dialing
number (max. 8 digits).
This is a useful feature for hotels.
For example, to dial Room Service, dial the digit "3", not the full extension number.
1.3.58 Redial, Last Number
This is convenient when calling the same outside party again.
PT/SLT/PS/SIP Extn.
REDIAL
OR
Press REDIAL or enter #.
Off-hook.
•
•
Up to 32 digits can be stored and redialed.
After pressing REDIAL, if you hear a busy tone again, press REDIAL to retry.
1.3.59 Room Status Control
In a hotel-type environment, an extension assigned as a hotel operator can check guests
into or out of rooms by changing the room status of the corresponding extension. The hotel
operator's extension must have flexible buttons assigned as Check-in and Check-out
buttons, and a DSS button for each extension that will be used in a guest room.
112
Operating Manual
1.3 Telephone Features and Operation
•
•
The hotel operator must be using a 6-line display PT to use the Room Status Control features.
While in Room Status Control mode:
a. The hotel operator's extension can only check extensions in or out. All other operations
will be ignored.
b. The light of each DSS button shows the room status of the corresponding extension as
follows:
Off: Check-out
Red on: Check-in
[Light Pattern Example: Check-in Mode]
DSS button
Room1230
Rooms 1230 and 1234
are currently in
check-in status.
Room1231
Room1232
Room1233
Check-in button
Room1234
Check-out button
c. The lights of other buttons may not show their normal display.
d. The hotel operator's extension is considered to be busy. Callers to that extension will hear
a busy tone.
To check in a guest
6-Line Display PT
While on-hook
Enter Room Number
ENTER
extension no.
OR
(Check-in)
(DSS)
EXIT
ENTER
Press Check-in.
Dial extension number and then press
"ENTER", or press desired DSS.
To continue
Room: 1234
EXIT
Confirm check in?
NO
Press "YES".
YES
OR
(Check-in)
Press "EXIT"
or Check-in to finish.
Operating Manual
113
1.3 Telephone Features and Operation
•
•
After check-in, Remote Extension Dial Lock is deactivated, and the guest can make outside
calls from the room extension. (Refer to "2.1.5 Remote Extension Dial Lock".)
When the room status of extensions is changed, detailed room status information is recorded
with the PBX automatically. This requires system programming.
<Example>
Date
Ext
Time
02/02/00 03:07PM
CO
1234
Dial Number
Check in
To check out a guest
6-Line Display PT
While on-hook
Enter Room Number
ENTER
extension no.
(Check-out)
OR
(DSS)
EXIT
ENTER
Dial extension number and then press
"ENTER", or press desired DSS.
Press Check-out.
To continue
Room: 1234
EXIT
Confirm check out?
NO
OR
(Check-out)
YES
Press "EXIT"
or Check-out to finish.
Press "YES".
•
•
•
After check-out, Remote Extension Dial Lock is activated, and outside calls from the room
extension are restricted. (Refer to "2.1.5 Remote Extension Dial Lock".)
After check-out, wake-up call and Call Log information for the room extension are cleared
automatically. In addition, features set on the room extension are reset to the default settings.
For a list of features that are reset, refer to "1.3.25 Extension Feature Clear".
When the room status of extensions is changed, detailed room status information is recorded
with the PBX automatically. This requires system programming.
<Example>
Date
Time
02/03/00 08:08AM
•
114
Ext
1234
CO
Dial Number
Check out
For information about other Hospitality features, refer to "1.3.33 HOSPITALITY FEATURES".
Operating Manual
1.3 Telephone Features and Operation
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Check-in or a Check-out button.
1.3.60 Self Labeling (KX-NT366 only)
The KX-NT366 IP-PT has 12 flexible buttons, and a
display for each button to show what feature, telephone
number or extension number is assigned to it. The display
can also be switched to show 3 other sets (Pages) of 12
flexible buttons assignment by pressing the NEXT PAGE
key. Different features, telephone numbers or extension
numbers can be assigned to each button in every set.
This means that 48 flexible buttons are available to an
extension user.
Page 4
Page 3
Page 1
Page 2
Bank
CO 6
Home
CO 5
Sales
LCS
CO 4
CO 3
PDN
CO 2
To switch display
KX-NT366
Press NEXT PAGE
to display the desired page.
•
•
When you answer an incoming call or when you seize a CO line, the display automatically
changes to the page that contains the green lit button.
After customizing each button, you can set the displayed text for the button. For details about
customizing buttons, refer to "3.1.4 Customizing the Buttons".
1.3.61 Speed Dialing, Personal
You can store up to 100 numbers at your extension for your personal use.
This feature is also known as Station Speed Dialing.
Operating Manual
115
1.3 Telephone Features and Operation
To store a phone number
PT/SLT
3
Off-hook.
Enter
0
30.
personal speed
dialing no.
desired
phone no.
Enter personal speed
dialing number
(2 digits).
Enter desired
phone number
(max. 32 digits).
C.Tone
Enter #.
On-hook.
Enter CO line access number
before outside phone number.
To dial
PT/SLT/SIP Extn.
AUTO DIAL
personal speed
dialing no.
STORE
OR
Off-hook.
Press AUTO DIAL
or enter
.
Enter
.
Dial personal speed
dialing number (2 digits).
•
A SIP Extension user cannot store personal speed dialing numbers at his/her extension.
However, it is possible to use the personal speed dialing numbers that are stored in the PBX,
through system programming.
•
To call using a directory, refer to "1.4.3 Directories".
1.3.62 Speed Dialing, System
You can make calls using speed dialing numbers stored in the PBX.
PT/SLT/PS/SIP Extn.
AUTO DIAL
STORE
OR
Off-hook.
•
116
Press AUTO DIAL
or enter
.
system speed
dialing no.
Dial system speed
dialing number (3 digits).
To call using a directory, refer to "1.4.3 Directories".
Operating Manual
1.3 Telephone Features and Operation
1.3.63 SVM (Simplified Voice Message)
Your PBX can provide you with answering machine service.
Your extension is assigned a message box, into which callers can leave voice messages for you.
After callers reach your message box, they will hear your personal greeting message. You can record two
kinds of personal greetings: a normal greeting message and a greeting message for each time mode. You
can also play back and clear your greeting messages and the voice messages left by callers.
–
–
–
–
–
–
–
Recording a Normal Greeting Message
Recording a Greeting Message for Each Time Mode
Redirecting Your Calls to Your Message Box
Leaving Voice Messages
Listening to Voice Messages Left by Callers
Accessing Your Message Box from an Outside Telephone
Accessing the Message Box of Another Extension from Your Extension
•
•
•
This feature is not available for SIP Extensions.
You may hear a busy tone when trying to access your message box if too many other users
are already accessing their message boxes. In that case, wait a few minutes and try again.
If the used recording space (including greeting messages and voice messages left by callers)
for the SVM feature reaches a certain limit, the display informs you that the recording space
is almost full, and you will hear dial tone 3 when going off-hook.
Dial Tone 3
1s
•
Operation Reference When Accessing Your Message Box
After entering the SVM feature number ( 38), the operations below are available by entering
the corresponding numbers.
Operation No.
#
Operation
0
To clear the normal greeting message
1
To record a normal greeting message
2
To play back the normal greeting message
3
To listen to voice messages left by callers
8
To set a greeting message for each time mode
6
To leave a voice message to another extension's message box
Operating Manual
117
1.3 Telephone Features and Operation
Recording a Normal Greeting Message
To record
PT/SLT/PS
8
3
1
C.Tone
Off-hook.
Enter
38.
Record
message.
Enter 1.
Example: "You have reached John. I am sorry I cannot
take your call right now. Please leave a message."
AUTO DIAL
The greeting
message is
played back.
STORE
OR
C.Tone
dial key
A confirmation
tone is heard.
Clear
0
*
OR
1
Rerecord
Enter 0 or 1 while the greeting
message is being played back.
Press STORE or any
dial key (0–9, , #).
To play back
PT/SLT/PS
8
3
2
C.Tone
Off-hook.
Enter
0
38.
A confirmation
tone is heard.
Clear
Enter 2.
*
OR
1
Rerecord
Enter 0 or 1 while the greeting
message is being played back.
•
118
* This step can be omitted.
Operating Manual
On-hook.
The greeting message
is played back.
On-hook.
1.3 Telephone Features and Operation
To clear
PT/SLT/PS
8
3
0
C.Tone
Off-hook.
Enter
38.
On-hook.
Enter 0.
Recording a Greeting Message for Each Time Mode
In addition to a normal greeting message, you can record a specific greeting message for each time mode
(day/lunch/break/night).
To record
PT/SLT/PS
0 Day
1 Night
8
8
3
1
2 Lunch
C.Tone
3 Break
Off-hook.
Enter
38.
Enter 8.
Enter the desired
time mode.
Enter 1.
AUTO DIAL
STORE
OR
dial key
Record
message.
C.Tone
The greeting message
is played back.
Press STORE or any
dial key (0–9, , #).
Example: "You have reached John. I am sorry I am
out for lunch right now. Please leave a message."
0
A confirmation
tone is heard.
Clear
*
OR
1
Rerecord
Enter 0 or 1 while the greeting
message is being played back.
On-hook.
Operating Manual
119
1.3 Telephone Features and Operation
To play back
PT/SLT/PS
0 Day
8
3
1 Night
8
2
2 Lunch
C.Tone
3 Break
Off-hook.
Enter
38.
Enter 8.
0
The greeting message
is played back.
Enter the desired
time mode.
A confirmation
tone is heard.
Clear
Enter 2.
*
OR
1
Rerecord
On-hook.
Enter 0 or 1 while the greeting
message is being played back.
•
* This step can be omitted.
To clear
PT/SLT/PS
0 Day
8
3
8
1 Night
2 Lunch
3 Break
Off-hook.
Enter
38.
Enter 8.
Enter the desired
time mode.
0
C.Tone
Enter 0.
•
120
On-hook.
If both the greeting message for a certain time mode and the normal greeting message have
been recorded, callers will hear the greeting message for that time mode. However, if no
greeting message has been recorded for a certain time mode, the normal greeting message
will be played instead.
Operating Manual
1.3 Telephone Features and Operation
Redirecting Your Calls to Your Message Box
You can set incoming calls to be redirected to your own message box so that callers can leave voice
messages when you cannot answer the phone.
To set/cancel
PT/SLT/PS
0
Both Calls
OR
7
1
1
Outside Calls
OR
2
Off-hook.
Enter
71.
Intercom Calls
Enter 0 to 2 as you desire.
0
Cancel
2
All Calls
3
Busy
4
No Answer
5
Busy/No Answer
Enter required number.
For "Cancel", go on-hook
directly after entering 0.
floating extension no.
for the SVM feature
Enter floating extension
number for the SVM feature.
•
#
Enter #.
C.Tone
On-hook.
The default floating extension number for the SVM feature is 591.
Leaving Voice Messages
If the extension user you called is not able to answer your call, and your call is redirected to the message
box, you will hear the greeting message. Then, you can leave a voice message for that extension. It is also
possible to leave a voice message directly in the message box of a desired extension by following the steps
below:
Operating Manual
121
1.3 Telephone Features and Operation
To leave a voice message directly to another extension's message box
PT/SLT/PS
8
3
Off-hook.
Enter
You hear the
greeting message.
38.
#
Enter #6.
extension no.
Dial extension number.
OR
C.Tone
dial key
Record
message.
•
6
On-hook or press any
dial key (0–9, , #).
Voice message recording will stop, you will hear a notification tone, and the call will be
disconnected, in the following cases:
a. the recording time for the voice message reaches the preprogrammed limit. (default: 120
seconds)
b. the recording space for the SVM feature reaches the limit.
•
When you are on the phone, you can transfer the call directly to the message box of a desired
extension by placing the call on hold temporarily, then pressing 38 + #6 + the desired
extension number. This allows the caller to leave a voice message in the message box of the
desired extension.
Listening to Voice Messages Left by Callers
When a caller leaves a voice message, information about that caller is also recorded as the SVM Log. The
SVM Log can be viewed using the display of a PT or PS by pressing the Message button.
To listen to voice messages
PT/PS
While on-hook
MESSAGE
Press MESSAGE
until desired SVM Log
appears.
122
Operating Manual
Off-hook.
1.3 Telephone Features and Operation
PT/SLT/PS
8
3
Off-hook.
Enter
3
38.
Enter 3.
PT/SLT/PS
MESSAGE
OR
7
Off-hook.
0
2
Press MESSAGE
or enter 702.
To clear the voice message that you are listening to
PT/SLT/PS
While hearing the voice message
AUTO DIAL
3
STORE
OR
1
Enter 3.
•
Press STORE or
enter 1 to confirm.
Various operations are available by entering numbers while you are listening to a recorded
voice message using any of the methods described above. The available options are as
follows:
Operation No.
1
/
#
Operations
To play back the voice message from the beginning
#
2
To go to the next voice message
3
To clear the voice message
(Press the AUTO DIAL/STORE button or enter 1 to confirm.)
4
To call back the caller who left the voice message
5
To go back to the previous voice message
6
To leave a voice message directly in the message box of
another extension (Enter desired extension number.)
Operating Manual
123
1.3 Telephone Features and Operation
•
•
•
•
#
8
To play back your greeting message and record a voice
message in your own message box
#
9
To end the call
In addition to the caller information that is recorded in the Call Log, the following SVM Log
information is recorded with voice messages left by callers:
•
Caller's Name
•
Caller's Telephone Number
•
Time recording started
•
Voice Message Status
– "New" is displayed for voice messages that have not previously been listened to.
– "Old" is displayed for voice messages that have previously been listened to.
Please note that the information shown on the display may vary depending on the information
that was received and the type of telephone used. Only users of a 6-line display PT can view
all of the above information.
You can lock the SVM Log display by using an extension PIN (Personal Identification Number)
to prevent other users from viewing the information and from playing back your voice
messages (Display Lock). Refer to "3.1.2 Personal Programming".
If your telephone has a Message for Another Extension button, you can access the message
box of another extension and listen to voice messages for that extension.
If a new voice message has been left in your message box, you will hear dial tone 4 after going
off-hook. In addition, if your telephone has a Message button or Message/Ringer Lamp, the
corresponding button or lamp will light when a voice message has been left.
Dial Tone 4
1s
To listen to voice messages while your display is locked
PT/SLT/PS
PIN: Personal Identification Number
4
Off-hook.
Enter
your
extension no.
extension no.
7
47.
Dial your
extension number.
extension PIN
C.Tone &
D.Tone
Enter extension PIN
(max. 10 digits).
If the wrong extension PIN is
entered, you hear an alarm tone.
8
3
Enter
124
Operating Manual
38.
3
Enter 3.
1.3 Telephone Features and Operation
•
When you press the Message button while on-hook to play back voice messages, Display
Lock is temporarily deactivated.
To clear voice messages from the SVM Log
PT
While on-hook
AUTO DIAL
MESSAGE
TRANSFER
STORE
Press MESSAGE
until desired SVM Log
appears.
Press TRANSFER.
Press STORE.
Accessing Your Message Box from an Outside Telephone
You can remotely access your message box and perform any operations of the SVM feature through a CO
line as if you were at your own extension.
From Outside Telephone
PIN: Personal Identification Number
The greeting
message is
played back.
desired phone no.
Off-hook.
Dial desired phone
number of a destination
that has set the SVM feature.
your
extension no.
extension no.
Dial your
extension number.
•
•
4
Enter 47 while hearing
the greeting message.
8
3
extension PIN
C.Tone &
D.Tone
Enter extension PIN
(max. 10 digits).
7
Enter
For available operations,
see "Operation Reference
When Accessing Your
Message Box".
38.
If you hear a reorder tone when you try to leave a voice message directly in the message box
of another extension, that message box is unavailable. You can enter another extension
number by pressing " ".
When accessing your message box from an outside telephone, you cannot call back callers
who have left voice messages by pressing 4 while hearing the voice message.
Operating Manual
125
1.3 Telephone Features and Operation
To listen to voice messages left in the message box of another extension
From Outside Telephone
PIN: Personal Identification Number
While hearing voice messages in your message box
#
The greeting
message is
played back.
8
4
Enter #8.
Enter
7
desired extension no.
47.
Dial desired
extension number.
3
extension PIN
8
3
C.Tone &
D.Tone
Enter extension PIN for
that extension (max. 10 digits).
Enter
38.
Enter 3.
If the wrong extension PIN is
entered, you hear an alarm tone.
Accessing the Message Box of Another Extension from Your
Extension
You can access the message box of another extension (for example, to record a greeting message for that
extension) by following the steps below:
PT/SLT/PS
PIN: Personal Identification Number
4
Off-hook.
Enter
7
desired extension no.
47.
Dial desired
extension number.
3
extension PIN
C.Tone &
D.Tone
Enter extension PIN for
that extension (max. 10 digits).
Enter
8
For available operations, see
"Operation Reference When
Accessing Your Message Box".
38.
If the wrong extension PIN is
entered, you hear an alarm tone.
1.3.64 TAFAS (Trunk Answer From Any Station)
You can be notified of incoming outside calls through an external speaker. These calls can be answered
from any extension.
126
Operating Manual
1.3 Telephone Features and Operation
Through an external speaker
PT/SLT/PS
While hearing a tone
4
Enter
Off-hook.
•
2
42.
speaker no.
C.Tone
Dial speaker
number (1 digit).
Talk.
You can also receive a paging announcement via a speaker with this operation.
1.3.65 Timed Reminder
You can set an alarm at your telephone as a reminder of a meeting or appointment.
The alarm can occur either once or daily (every day until canceled) at a preset time. When you go off–hook
to answer, you will hear a special dial tone or prerecorded message.
•
This feature can also be set remotely by an extension assigned as a hotel operator (Remote
Wake-up Call). The most recent setting will be valid no matter which extension made the
setting. For information about setting a Remote Wake-up Call, refer to "1.3.72 Wake-up Call".
To set
PT/SLT
12 H*: hour/minute
7
Off-hook.
Enter
0
6
760.
0
1
Enter 1.
Daily
Enter 0 for once
or 1 for daily.
•
AM
PM
hour/minute
Enter hour (01–12) and minute (00–59)
and then 0 for AM or 1 for PM,
or enter hour (00–23) and minute (00–59).
Once
OR
1
1
OR
24 H*:
0
OR
C.Tone
On-hook.
* Enter the time in the format assigned to your PBX (12-hour or 24-hour).
Operating Manual
127
1.3 Telephone Features and Operation
To cancel
PT/SLT
7
Enter
Off-hook.
6
760.
0
0
C.Tone
Enter 0.
On-hook.
To stop or answer the ringback
PT/SLT
INTERCOM
OR
Press INTERCOM or off-hook.
To confirm
PT
TRANSFER
Press TRANSFER
several times.
•
•
•
•
You can also confirm the timed reminder by using the soft button.
The alarm keeps ringing for preprogrammed seconds.
If you receive an incoming call during ringback, the ringing starts after the ringback stops.
If you are having a conversation exceeding alarm ringing period, the ringback will start
after your conversation.
1.3.66 Time Service
You can check the current status of the Time Service on the display.
128
Operating Manual
1.3 Telephone Features and Operation
PT
While on-hook
TRANSFER
OR
(Time Service
(Day/Night/
Lunch/Break))
Press TRANSFER or Time Service
(Day/Night/Lunch/Break).
•
•
The Time Service (Day/Night/Lunch/Break) button light always shows the current status as
follows:
Off: Day mode
Green on: Lunch mode
Flashing green: Break mode
Red on: Night mode
Flashing red: Holiday mode
Any extension user except the managers can check the current status by pressing the Time
Service (Day/Night/Lunch/Break) button.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Time Service (Day/Night/Lunch/Break) button.
1.3.67 Verification Code Entry
You can use your calling privileges (Class of Service) at another extension. You can override restrictions
which have been set at that extension. To use this feature, a verification code and verification code PIN
(Personal Identification Number) are required.
To call
PT/SLT/PS/SIP Extn.
PIN: Personal Identification Number
4
Off-hook.
Enter
verification code PIN
7
47.
C.Tone &
D.Tone
Enter verification code
PIN (max. 10 digits).
If a wrong verification code PIN is
entered, you hear an alarm tone.
verification code
Enter
.
Enter verification code
(max. 4 digits).
desired
phone no.
Dial desired
phone number.
Seize CO line before entering
outside phone number.
Operating Manual
129
1.3 Telephone Features and Operation
1.3.68 VOICE MAIL FEATURES
The following services are available using a Voice Processing System:
Features
Description
Voice Mail Integration
You or an outside party can access the Voice Processing System from
a telephone.
(→ 1.3.71 Voice Mail Features—Voice Mail Integration)
Live Call Screening (LCS)
Two-way Record
•
Using a Panasonic Voice Processing system that supports digital
integration (e.g., KX-TVA series), you can monitor a call without
answering while the caller is leaving a message in your mailbox.
(→ 1.3.69 Voice Mail Features—LCS (Live Call Screening))
Using a Panasonic Voice Processing system that supports digital
integration (e.g., KX-TVA series), you can record a conversation into a
mailbox while talking on the phone.
(→ 1.3.70 Voice Mail Features—Two-way Record)
Voice Processing System features are not available for SIP Extension users.
1.3.69 Voice Mail Features—LCS (Live Call Screening)
Using a Panasonic Voice Processing system that supports digital integration (e.g., KXTVA series), you can monitor a call without answering while the caller is leaving a message
in your mailbox. If you so desire, you can answer the call while monitoring. There are two
methods available as follows:
Hands-free mode (Default):
You can monitor the message automatically, live through the telephone speaker.
Private mode:
You will hear an alarm tone while the caller is leaving a message.
Before operating
•
•
•
•
130
Create a Live Call Screening (LCS) button (Personal Programming).
Select the mode, either Hands-free or Private (Personal Programming).
Set the extension PIN (Personal Identification Number).
Set the Live Call Screening feature.
Operating Manual
1.3 Telephone Features and Operation
To set Live Call Screening
PT/PS
PIN: Personal Identification Number
extension PIN
(Live Call
Screening)
Press Live Call
Screening.
Enter extension PIN
(max. 10 digits).
This is required only when
an extension PIN is stored.
To cancel Live Call Screening
PT/PS
(Live Call
Screening)
Press red Live Call Screening.
Operating Manual
131
1.3 Telephone Features and Operation
Operation Flowchart
The operations in the shaded areas can be done hands-free.
PT/PS
Hands-free Mode
Private Mode
(Alarm Tone)
Monitoring (Hands-free)
Monitoring
SP-PHONE
Monitoring (Handset)
MONITOR
OR
No operation
OR
(Live Call
Screening)
Press SP-PHONE, MONITOR or Live Call
Screening.
Off-hook.
Stop
monitoring Answering
SP-PHONE
(Live Call
Screening)
Press Live Call
Screening.
OR
Stop
monitoring
Answering
the call
Stop
monitoring
Answering
the call
(Live Call
Screening)
(Live Call
Screening)
Press
Live Call
Screening.
On-hook.
Press
Live Call
Screening.
MONITOR
Press
SP-PHONE
or MONITOR.
SP-PHONE
OR
MONITOR
Press SP-PHONE or
MONITOR.
•
•
The Live Call Screening (LCS) button light shows the feature status as follows:
Off: LCS is off.
Flashing green rapidly: Alerting in the Private mode.
Flashing green slowly: Monitoring.
Red on: LCS is on.
The manager extension can clear an extension PIN.
This feature is available for a single line telephone if it is connected to a proprietary telephone
in parallel. (Private mode only)
To answer the call while monitoring, press Recall/hookswitch.
Only the handset monitoring in the Private mode is available for PS users.
•
For information about other Voice Mail features, refer to "1.3.68 VOICE MAIL FEATURES".
•
•
Customizing Your Phone
•
3.1.2 Personal Programming—Live Call Screening Mode Set
Select the mode, either monitoring the message through the speaker automatically or
receiving, while the caller leaves a message.
•
3.1.4 Customizing the Buttons
Create or edit a Live Call Screening (LCS) button.
132
Operating Manual
1.3 Telephone Features and Operation
1.3.70 Voice Mail Features—Two-way Record
Using a Panasonic Voice Processing system that supports digital integration (e.g., KXTVA series), you can record a conversation into a mailbox while talking on the phone.
You can select the mailbox each time you record a conversation.
To record into your mailbox
PT/PS
During a conversation
(Two-way
Record)
To stop recording,
press this button again.
Press Two-way Record.
To record into another mailbox (Two-way Transfer)
PT/PS
During a conversation
(DSS)
(Two-way
Transfer)
Press Two-way
Transfer.
OR
another
extension no.
Press DSS or enter
another extension
number.
To stop recording,
press this button again.
To record into another mailbox with one touch (One-touch Two-way Transfer)
PT/PS
During a conversation
(One-touch
Two-way
Transfer)
Press One-touch
Two-way Transfer.
•
The Two-way Record button light, Two-way Transfer button light or One-touch Two-way
Transfer button light shows the current status as follows:
Off: Not recording.
On: Recording the conversation.
Operating Manual
133
1.3 Telephone Features and Operation
•
•
Note:
Many states have imposed regulations on the manner in which 2-way telephone
conversations may be recorded, so you should inform the other party that the conversation is
being recorded.
Consult your local telephone company for further information.
For information about other Voice Mail features, refer to "1.3.68 VOICE MAIL FEATURES".
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Two-way Record button, a Two-way Transfer button and a One-touch
Two-way Transfer button.
1.3.71 Voice Mail Features—Voice Mail Integration
If you cannot answer calls, you can forward them to your mailbox. You can select the type of incoming calls
(Intercom Calls/Outside Calls/Both Calls). If your telephone has a Message button, the Message light turns
on and lets you know you have messages. Even if a Message button is not provided, you will hear an
indication tone* when going off-hook.
You can also transfer received outside calls to a mailbox so that calling parties can leave messages. If you
create a Voice Mail Transfer button on your phone, the transfer is done without knowing the mailbox number
(Voice Mail Transfer).
The duration for recording depends on the voice processing system.
To forward your calls to your mailbox
PT/SLT/PS
0
Both Calls
OR
7
1
1
Outside Calls
OR
2
Off-hook.
Enter
71.
Intercom Calls
Enter 0 to 2 as you desire.
0
Cancel
2
All Calls
3
Busy
4
No Answer
5
Busy/No Answer
Enter required number.
For "Cancel", go on-hook
directly after entering 0.
134
voice mail floating
extension no.
#
Enter voice mail floating
extension number.
Enter #.
Operating Manual
C.Tone
On-hook.
1.3 Telephone Features and Operation
To transfer a call to a mailbox (Voice Mail Transfer)
PT/PS
During a conversation
(DSS)
OR
(Voice Mail
Transfer)
desired
extension no.
Press Voice Mail
Transfer.
Press DSS or enter desired
extension number.
To listen to messages
PT/SLT/PS
MESSAGE
OR
voice mail floating
extension no.
Off-hook.
Press MESSAGE or enter voice
mail floating extension number.
*Indication tone after going off-hook
1s
•
You can access a voice mail with one-touch.
•
•
The default voice mail floating extension number is 500.
For information about other Voice Mail features, refer to "1.3.68 VOICE MAIL FEATURES".
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Voice Mail Transfer button or a Message button.
1.3.72 Wake-up Call
In a hotel-type environment, an extension assigned as a hotel operator can remotely set
or cancel a timed reminder to a room extension (Remote Wake-up Call). This allows
guests to request wake-up calls without having to program the extension themselves. The
hotel operator can also confirm the current timed reminder setting for a room extension.
Operating Manual
135
1.3 Telephone Features and Operation
•
This feature can also be set from a room extension (Timed Reminder). The most recent
setting will be valid no matter which extension made the setting. For information about setting
a Timed Reminder, refer to "1.3.65 Timed Reminder".
To set
PT
extension no.
7
6
1
OR
(DSS)
Off-hook.
Enter
76
.
0
12 H*: hour/minute
AM
1
0
PM
Once
OR
hour/minute
1
Daily
C.Tone
On-hook.
Enter 0 for once
or 1 for daily.
Enter hour (01–12) and minute (00–59)
and then 0 for AM or 1 for PM,
or enter hour (00–23) and minute (00–59).
•
Dial extension number
or press desired DSS.
OR
OR
24 H*:
Enter 1.
* Enter the time in the format assigned to your PBX (12-hour or 24-hour).
To cancel
PT
extension no.
7
6
0
OR
C.Tone
(DSS)
Off-hook.
136
Operating Manual
Enter
76
.
Enter 0.
Dial extension number
or press desired DSS.
On-hook.
1.3 Telephone Features and Operation
To confirm
Display PT
Enter Room Number
7
Off-hook.
Enter
6
76
2
.
Enter 2.
1234 11:50 AM Onetime
extension no.
OR
C.Tone
(DSS)
On-hook.
Confirm the Timed Reminder
information.
Dial extension number
or press desired DSS.
•
When a timed reminder starts, and when it is answered or not answered, detailed timed
reminder information is recorded automatically. This requires system programming.
<Example>
Date
Time
02/02/00 02:45PM
02/02/00 02:46PM
02/02/00 02:47PM
•
•
Ext
1234
1234
1234
CO
Dial Number
Timed Reminder/Start
Timed Reminder/No Answer
Timed Reminder/Answer
Users of PTs without displays can confirm only whether a timed reminder has been set or not
by following the steps shown above. If set, a confirmation tone will be heard.
For information about other Hospitality features, refer to "1.3.33 HOSPITALITY FEATURES".
1.3.73 Walking COS
You can use your calling privileges (Class of Service) at another extension. You can override restrictions
which have been set at that extension. To use this feature, an original extension number and an extension
PIN (Personal Identification Number) are required.
After performing the Walking COS feature, you can set the following features on your telephone from
another extension or through DISA.
•
Call Forwarding (FWD)/Do Not Disturb (DND)
•
Changing the Log-in/Log-out Status of Extensions
•
Absent Message
•
Extension Dial Lock
•
Time Service—Changing the Time Mode (Day/Night/Lunch/Break)
Operating Manual
137
1.3 Telephone Features and Operation
To make a call or set features from another extension
PT/SLT/PS/SIP Extn.
PIN: Personal Identification Number
desired
phone no.
4
Off-hook.
Enter
7
47.
your
extension no.
extension PIN
Dial your
extension number.
Enter extension PIN
(max. 10 digits).
C.Tone &
D.Tone
OR
desired
feature no.
Dial desired phone number
or desired feature number.
If a wrong extension PIN is
entered, you hear an alarm tone.
Seize CO line before entering
outside phone number.
To make a call or set features through DISA
From Outside Telephone
DISA
phone no.
Off-hook.
PIN: Personal Identification Number
4
R.B.Tone &
DISA message
Dial DISA
phone number.
Enter
7
47.
your
extension no.
extension no.
Dial your
extension number.
desired
phone no.
extension PIN
C.Tone &
D.Tone
Enter extension PIN
(max. 10 digits).
If a wrong extension PIN is
entered, you hear an alarm tone.
OR
desired
feature no.
Dial desired phone number
or desired feature number.
Seize CO line before entering
outside phone number.
1.3.74 Walking Extension
You can exchange the settings set at another extension with your own settings. This allows you to use your
own settings, including your extension number, on another person's extension. Settings such as extension
number and One-touch Dialing memory are available at the new extension. It is also possible to exchange
the DSS Console settings along with the extension settings. Walking Extension is useful, for example, when
you move to a new location in the office.
This feature is also known as Walking Station.
138
Operating Manual
1.3 Telephone Features and Operation
To exchange your settings with another extension
PT/SLT
PIN: Personal Identification Number
Off-hook.
7
2
Enter
727.
extension PIN
Enter extension PIN
(max. 10 digits).
•
•
•
•
your
extension no.
7
Dial your
extension number.
D.Tone
On-hook.
An extension personal identification number (PIN) is required to use this feature. Refer to
"1.3.26 Extension PIN (Personal Identification Number)" in "3.1.1 Programming Information".
Your previous extension will receive the old settings of your new extension.
Extension settings can be exchanged between SLT and SLT, PT and PT, or SLT and PT.
If you are using a KX-NT300 series telephone with a Bluetooth wireless headset, and
exchange the settings with another KX-NT300 series telephone user, you cannot use your
Bluetooth wireless headset at the other extension.
Bluetooth wireless headsets are registered on extensions themselves. Therefore, you have
to register a Bluetooth wireless headset on each desired extension. For details about
registration, refer to "Bluetooth Registration" in "3.1.2 Personal Programming".
1.3.75 Walking Extension, Enhanced
In addition to exchanging the settings between extensions (Walking Extension), you can change the status
of your extension to "Service-in" or "Service-out" (Enhanced Walking Extension).
Service-in: An extension is in use (normal status).
Service-out: Extension Dial Lock (→ 1.3.24 Extension Dial Lock) and Do Not Disturb (DND) (→ 1.3.19 DND
(Do Not Disturb)) are activated on an extension, and the extension user cannot make unauthorized outside
calls nor receive calls.
This feature is useful when:
a) one person uses the same extension settings at different locations, such as another branch office
or at home
b) two or more people use the same telephone in turn
Operating Manual
139
1.3 Telephone Features and Operation
<Example (a)> When using extension settings at a different location
Main Office
Service-in
Service-out
Service-out
Extension status
of Telephone A
Extn. No. 101
Service-in
Service-out
Extn. No. 101
Service-out
Extn. No. 102
Service-out
Branch Office
Extn. No. 102
Service-out
Extn. No. 102
Service-out
Service-out
Service-out
Service-in
Extn. No. 101
Service-in
Extension status
of Telephone B
Service-in
In this example, extension user A sets his/her own extension status to "Service-out" at the main office. Then,
he/she can set another extension status to "Service-in" at the branch office to have his/her own extension
settings available at the extension.
<Example (b)> When two users share one telephone
User A
Extn. No. 101
Service-in
Extension
Status
User B
Service-out
Extn. No. 101
Service-out
Service-out
Service-in
Extn. No. 102
Service-out
Extn. No. 101
Service-out
Extn. No. 102
Service-out
Service-in
Service-in
Extn. No. 102
Service-in
In this example, extension users A and B work in shifts and use the same extension in turn. User A sets the
extension status to "Service-out" when he/she finishes work. Then, user B can set the extension status to
"Service-in" and have his/her own settings available at the extension.
140
Operating Manual
1.3 Telephone Features and Operation
To set an extension to Service-out status
PT/SLT
Off-hook.
7
2
Enter
727.
7
On-hook.
Enter #.
To set an extension to Service-in status and have your own settings available
PT/SLT
PIN: Personal Identification Number
Off-hook.
7
2
Enter
727.
your
extension no.
7
Enter
.
Dial your extension
number.
extension PIN
C.Tone
On-hook.
Enter extension PIN
(max. 10 digits).
•
•
An extension personal identification number (PIN) is required to use this feature. Refer to
"1.3.26 Extension PIN (Personal Identification Number)" in "3.1.1 Programming Information".
Extension settings can be exchanged between SLT and SLT, PT and PT, or SLT and PT.
1.3.76 Whisper OHCA
During a conversation, you can be informed of a waiting call with a voice announcement. You cannot talk to
the caller, but you can hear the caller speaking through the handset.
To set/cancel for intercom calls (Manual Call Waiting)
PT
0
7
3
1
OR
3
Off-hook.
Enter
731.
No call
C.Tone
Whisper OHCA
Enter 0 or 3.
On-hook.
Operating Manual
141
1.3 Telephone Features and Operation
•
•
•
•
Whisper OHCA is only available with certain digital proprietary telephones and IP proprietary
telephones. In addition, both you and the other party must use supported telephones.
Whisper OHCA is not available for outside calls; only call waiting tone can be set (refer to
"1.3.13 Call Waiting Tone").
A PDN extension can only receive OHCA or Whisper OHCA from the corresponding SDN
extension. When a call is made from another extension, a PDN extension will receive a call
waiting tone. (→ 1.3.49 PDN (Primary Directory Number)/SDN (Secondary Directory
Number) Extension)
For information about answering a waiting call, refer to "1.3.12 CALL WAITING FEATURES".
1.3.77 Wireless XDP Parallel Mode
Your PS can be used in parallel with a PT or SLT.
When in this mode, incoming calls to a wired telephone also ring the paired PS.
To set
PS
4
Press TALK.
Enter
8
48.
1
extension no.
Enter 1.
Enter extension number
of the paired telephone.
C.Tone
Press CANCEL.
To cancel
PS
4
Press TALK.
•
•
142
Enter
8
48.
0
Enter 0.
C.Tone
Press CANCEL.
Some wired telephones are prohibited from using this feature.
If you go off-hook while your paralleled telephone is in use, the call will switch over to you.
Operating Manual
1.4 Display Features
1.4
Display Features
1.4.1
Call Log, Incoming
When you receive an outside call or an external sensor call, call information is recorded automatically in the
incoming call log. A preprogrammed number of calls can be logged per extension. When the call log is full
and other call arrives, the oldest call is deleted.
You can modify the logged telephone number using the display proprietary telephone or the portable station.
When the Call Log button light turns on, there is a call which you did not answer.
The following information is logged.
Telephone
Information
KX-T7636/KX-T7633/
KX-T7630/KX-T7433
KX-NT300 series/KX-NT136
KX-TD7694/KX-TD7684/
KX-TD7690/KX-TD7680
6-line display PT
1-line or 2-line display PT
3-line display PT except
KX-T7633/KX-T7630/
KX-T7433
KX-NT265
Wireless phone
(KX-TD7896/KX-TD7895/
KX-T7885)
Caller's Name
Date/Time call
received
Answered or
Not Answered
Confirmed or
Not Confirmed
Caller's Phone
Number
*
*
*: If the caller's name is not logged, the caller's phone number is displayed.
If the caller's name is logged, the caller's phone number is not displayed.
Operating Manual
143
1.4 Display Features
The incoming call log information is displayed as follows:
[With Caller's Name]
Catherine ------------------------------------ Caller's name (max. 20 digits)
OCT.27 4:30PM
THU --------------- Date and time the call was received
New : Not Answered
----------------- Answering Status*
1234567
--------------------------------------- Caller's number (max. 16 digits)
EXIT
CLEAR
[Without Caller's Name]
--------------------------------------- Caller's number (max. 16 digits)
1234567
OCT.27 4:30PM
THU --------------- Date and time the call was received
Old : Not Answered
----------------- Answering Status*
EXIT
CLEAR
*: "New" is displayed for call logs which have not previously been viewed;
"Old" is displayed for call logs which have previously been viewed.
To view the log information with the Call Log button
Display PT
While on-hook
(Call Log)
Press Call Log until
desired party appears.
To view the log information with the Navigator key
KX-NT300/KX-T7600
While on-hook
Press Left twice.
144
Operating Manual
Press Up or Down until
desired party appears.
1.4 Display Features
To clear the log information
Display PT
While viewing the log information
(Call Log)
TRANSFER
OR
Press Call Log, or Up or Down
until desired party appears.
Press TRANSFER.
To call
Display PT
While viewing the log information
(Call Log)
OR
Press Call Log, or Up or Down
until desired party appears.
•
•
•
•
•
•
•
Off-hook.
The Call Log button light shows the current status as follows:
Off: No incoming call, or you have already viewed the call log.
Red on: You have missed calls to view.
If your call is answered by another extension, the caller's information is recorded in the logs
of both your extension and the answering extension.
You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information. Refer to "3.1.2 Personal
Programming".
You can also have a Call Log button for an ICD Group (Incoming Call Distribution Group).
If a call arrives while you are using the call log, the call log display will be replaced with the
caller's information.
PS user: Refer to "Operating Instructions" for PS.
Caller information received with a call waiting tone from the telephone company will not be
logged in the call log.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Call Log button or Call Log for ICD Group button.
1.4.2
Call Log, Outgoing
You can redial using the outgoing call log.
Operating Manual
145
1.4 Display Features
To call
KX-NT300/KX-T7600
While on-hook
Press Left.
Press Up or Down
until desired number
appears.
Off-hook.
To call with the REDIAL button
Display PT
While on-hook
REDIAL
REDIAL
Press REDIAL to
display the outgoing
call log.*
•
•
Press REDIAL
until desired number
appears.
Off-hook.
* System programming is required for this operation.
This operation is available only for digital proprietary telephones with a display.
To store the caller's information in personal speed dialing
Display PT
When the desired party is displayed
AUTO DIAL
STORE
Press STORE.
146
Operating Manual
1.4 Display Features
<Operation Example: Storing the caller's information in personal speed dialing>
[Initial Display]
OCT.27
PROG
03:13PM
INFO
RING
THU
3
AUTO DIAL
Press
STORE
MENU
ABCD
1
4
Press
05:12341115678
Name?
EXIT CLEAR ENTER
Enter name.
Outgoing Call Log
EXIT
ENTER
ABCD
2
Press
until desired number is
selected.
5
05:12341115678
Ann
EXIT CLEAR ENTER
Press
1234567890
106
->12341115678
0001112223333
301
EXIT CLEAR ENTER
•
•
You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information. Refer to "3.1.2 Personal
Programming".
If a call arrives while you are using the call log, the call log display will be replaced with the
caller's information.
PS user: Refer to "Operating Instructions" for PS.
•
To enter characters, refer to "1.3.14 Character Entry".
•
Operating Manual
147
1.4 Display Features
1.4.3
Directories
You can select and call using the directories (Personal Speed Dialing Directory, System Speed Dialing
Directory and Extension Number Directory).
Only personal directories can be stored, edited or deleted on your extension.
If a call arrives while you are using a directory, the display will be replace with the caller's information.
– Calling with the Directory
– Storing New Names and Numbers
Calling with the Directory
To select and call
KX-NT300/KX-T7600
While on-hook
Press Right until
desired directory
appears.*
•
•
•
•
•
148
Press Up or Down
until desired
party appears.
Off-hook.
* The display order is as follows:
One time: Personal Speed Dialing Directory
Two times: System Speed Dialing Directory
Three times: Extension Number Directory
To cancel or exit, press the CANCEL or FLASH/RECALL button.
You can lock your personal speed dialing directory by using an extension PIN (Personal
Identification Number), so that you can prohibit access to it. Refer to "3.1.2 Personal
Programming".
Directory entries generally should include name and number. If the name is not registered,
an entry cannot be displayed.
The System Speed Dialing Directory can be displayed simply by pressing the AUTO DIAL
button while on-hook.
Operating Manual
1.4 Display Features
Storing New Names and Numbers
To store a Personal Speed Dialing Directory item
Display PT
While on-hook
PROGRAM
phone no.
name
OR
OR
AUTO DIAL
AUTO DIAL
PAUSE
STORE
STORE
OR
Enter phone number
(max. 32 digits).
Press ENTER
or STORE.
Enter name
(max. 20 characters).
Press ENTER
or STORE.
Press PROGRAM
or PAUSE.
<Operation Example: Storing a name and an outside phone number in the Personal Speed Dialing
Directory>
[Initial Display]
OCT.27
PROG
1
03:13PM
INFO
RING
THU
2
Press
MENU
While on-hook, enter the phone number
you want to store.
to store.
00: 12341115678
Name?
EXIT
ENTER
3
Enter the name to be displayed for
the number.
12341115678
PROG
<-
CLEAR STORE
ABCD
4
•
•
Press
00: 12341115678
Ann
EXIT CLEAR ENTER
to store.
Telephone number and name on the display are stored using the first spare Personal Speed
Dialing memory available.
PS user: Refer to "Operating Instructions" for PS.
Operating Manual
149
1.4 Display Features
•
•
1.4.4
To enter characters, refer to "1.3.14 Character Entry".
For more details, refer to "To store the names and numbers in personal speed dialing" in
"3.1.2 Personal Programming".
System Feature Access
You can access commonly used features with the "Feature Access" menu.
To select a feature from the "Feature Access" menu
KX-NT300/KX-T7600
While on-hook
Press Right
four times.
Press ENTER.
Press Up or Down until the desired
feature is selected, and follow
the display prompts.
Features
150
Description
Call Back Cancel
You can cancel Automatic Callback Busy.
(→ 1.3.4 Automatic Callback Busy (Camp-on))
Call Pickup Directed
You can pick up a call ringing at a specified extension.
(→ 1.3.9 Call Pickup)
Call Pickup Group
You can pick up a call ringing at another extension within a call pickup
group.
(→ 1.3.9 Call Pickup)
Doorphone Call
You can call a doorphone.
(→ 1.3.21 Doorphone Call)
Door Open
You can open a door.
(→ 1.3.20 Door Open)
External BGM
A manager extension can turn on/off background music through
external speakers.
(→ 2.1.2 External BGM (Background Music))
Paging
You can make a voice announcement through the built-in speakers of
proprietary telephones (PTs) and/or external speakers.
(→ 1.3.47 Paging)
External Relay ON
You can switch on a relay.
(→ 1.3.27 External Relay)
Operating Manual
1.4 Display Features
<Display Prompts>
[Call Back Cancel]
->Call Back Cancel
Call Pickup Directed
Call Pickup Group
Doorphone Call
Door Open
EXIT
ENTER
Press
or
ENTER
Sure?
[Call Pickup Directed]
Call Back Cancel
->Call Pickup Directed
Call Pickup Group
Doorphone Call
Door Open
EXIT
ENTER
Press
or
ENTER
Extension No. >
NO
YES
EXIT
[Call Pickup Group]
Call Back Cancel
Call Pickup Directed
->Call Pickup Group
Doorphone Call
Door Open
EXIT
ENTER
Press
or
ENTER
Group No. >
SET
EXIT
SET
Enter extension number
Enter call pickup group
and press
number and press
Press
Call Back Cancelled
12341115678
12341115678
MENU
You are connected with the caller,
and the caller's number is displayed.
MENU
You are connected with the caller,
and the caller's number is displayed.
Operating Manual
151
1.4 Display Features
[Doorphone Call]
Call Back Cancel
Call Pickup Directed
Call Pickup Group
->Doorphone Call
Door Open
EXIT
ENTER
Press
or
ENTER
Door No. >
EXIT
[Door Open]
[External BGM]
Call Back Cancel
Call Pickup Directed
Call Pickup Group
Doorphone Call
->Door Open
EXIT
ENTER
Press
or
ENTER
Door No. >
SET
EXIT
->External BGM
Paging
External Relay ON
Call Back Cancel
Call Pickup Directed
EXIT
ENTER
Press
ENTER
or
Pager No. >
SET
EXIT
SET
Enter doorphone number
Enter doorphone number
Enter pager number and
and press
and press
press
D01:Door
MENU
Door01:Open
OPEN
BGM No. >
EXIT
SET
Enter BGM number
and press
External BGM 1 - 2
The BGM starts playing.
152
Operating Manual
1.4 Display Features
[Paging]
[External Relay ON]
External BGM
->Paging
External Relay ON
Call Back Cancel
Call Pickup Directed
EXIT
ENTER
Press
or
ENTER
Group No. >
EXIT
External BGM
Paging
->External Relay ON
Call Back Cancel
Call Pickup Directed
EXIT
ENTER
Press
or
ENTER
Relay No. >
SET
EXIT
SET
Enter paging group
Enter relay number
number and press
and press
Pager01
External Relay01
An alarm tone will be heard at
the paged extensions, and you
can start your page.
Operating Manual
153
1.4 Display Features
154
Operating Manual
Section
2
Manager Operation
This chapter shows the manager how to control the other
extensions or the PBX.
Operating Manual
155
2.1 Manager Service Features
2.1
Manager Service Features
2.1.1
Dial Tone Transfer
The manager can change the restriction level, permitting an extension to make a call.
PT/PS
During a conversation with an extension
(Toll Restriction)
C.Tone
On-hook.
Press Toll Restriction.
The extension can hear the dial
tone and then make a call.
•
The restriction level is changed to the preprogrammed level of Toll Restriction button.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Toll Restriction (TRS) button.
2.1.2
External BGM (Background Music)
The manager extension can select and broadcast background music in the office through external speakers.
To select and start/stop the background music
PT/SLT/PS
external
pager no.
3
5
OR
BGM no.
OR
0
Off-hook.
156
Operating Manual
Enter
35.
Enter external
pager number
(1 digit) or for all.
Enter BGM number
(1 digit) or 0 to stop.
C.Tone
On-hook.
2.1 Manager Service Features
2.1.3
OGM (Outgoing Messages)
The manager extension can record three kinds of greeting messages (OGM) as follows:
1. DISA message: Used to greet and guide callers so that they access extension user
group or outside party without operator assistance.
2. Incoming Call Distribution Group message: Used to greet and guide callers to an
incoming call distribution group.
3. Timed Reminder message: Used when the extension answers the Timed Reminder.
All messages have their own extension numbers. You can select the desired message. You have two
methods for recording a message. One is recorded using the handset, and the other is recorded from an
external BGM (MOH) port.
To record
PT
3
Off-hook.
Enter
36.
AUTO DIAL
STORE
1
OGM floating
extension no.
Enter 1.
Enter OGM floating
extension number.
6
Progress
Tone &
C.Tone
Record
message.
The message
is played back.
C.Tone
On-hook.
Press STORE.
When the time limit passes,
it stops automatically.
To play back
PT
3
Off-hook.
Enter
2
OGM floating
extension no.
Enter 2.
Enter OGM floating
extension number.
6
36.
C.Tone
The message
is played back.
On-hook.
Operating Manual
157
2.1 Manager Service Features
To record from an external BGM (MOH) port
PT
3
Off-hook.
Enter
OGM floating
extension no.
6
36.
Progress
Tone &
C.Tone
Enter OGM floating
extension number.
BGM port
no.
3
Enter 3.
You hear
the message.
Enter BGM port
number (1 digit).
CONF
C.Tone
The message
is recorded.
Press CONF.
AUTO DIAL
The message
is played back.
C.Tone
STORE
On-hook.
Press STORE.
When the time limit passes,
it stops automatically.
To clear the message
PT
3
Off-hook.
•
•
158
Enter
6
36.
0
OGM floating
extension no.
Enter 0.
Enter OGM floating
extension number.
Progress
Tone &
C.Tone
On-hook.
Record voice messages only; avoid the recording of music.
The default of OGM floating extension numbers is 5xx (xx: two-digit number of message).
Operating Manual
2.1 Manager Service Features
2.1.4
Private Network Features—NDSS (Network Direct Station
Selection) Monitor Release
NDSS buttons can be customized on any extension connected to your PBX. An NDSS
button allows an extension user to monitor another extension connected to another PBX
in a private network. The NDSS button light shows the current status of the monitored
extension. When it becomes unnecessary to monitor an extension connected to another
PBX, the manager can stop the PBX from monitoring it. Any NDSS buttons set to monitor
that extension will also stop monitoring.
PTPT/PS
and SLT
7
8
another PBX
extension no.
4
OR
C.Tone
(NDSS)
Off-hook.
•
Enter
784.
On-hook.
Dial another PBX extension
number and then enter #, or
press NDSS.
To restart monitoring of an extension after performing this operation, go off-hook, press the
corresponding NDSS button, and go on-hook.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Network Direct Station Selection (NDSS) button.
2.1.5
Remote Extension Dial Lock
This feature can override Extension Dial Lock (refer to 1.3.24 Extension Dial Lock) that has been set by an
extension user. If the manager extension locks the extension, the extension user cannot unlock it.
This feature is also known as Remote Station Lock Control.
PT/SLT/PS
2
7
8
3
Off-hook.
2.1.6
Enter
78.
Unlock
extension no.
OR
Lock
Enter 2 to unlock
or 3 to lock.
Enter extension
number.
C.Tone
On-hook.
Time Service Mode Control
The manager extension or the preprogrammed extension can change the time mode (Day, Lunch, Break or
Night).
There are two methods (Automatic or Manual) of changing the time modes.
Operating Manual
159
2.1 Manager Service Features
Automatic: enables the time mode for each day of the week to change automatically. You may also change
it manually.
Manual: enables to change a mode in manual as follows.
To change the time mode (Day/Night/Lunch/Break)
PT/PS
While on-hook
(Time Service
(Day/Night/
Lunch/Break))
Press Time Service
(Day/Night/Lunch/Break)
until the desired mode
appears.
PT/SLT/PS
7
Off-hook.
Enter
8
780.
0
0
Day
1
Night
2
Lunch
3
Break
Enter 0 to 3
as you desire.
C.Tone
On-hook.
To select the time service switching mode (Automatic/Manual)
PT/PS
While on-hook
(Time Service
Switching Mode
(Automatic/Manual))
Press Time Service
Switching Mode
(Automatic/Manual).
•
•
•
160
Besides the time mode, there is Holiday mode. It can change mode once on a specified date.
The Time Service (Day/Night/Lunch/Break) button light shows the current status as follows:
Off: Day mode
Green on: Lunch mode
Flashing green: Break mode
Red on: Night mode
Flashing red: Holiday mode
The Time Service Switching Mode (Automatic/Manual) button light shows the current status
as follows:
Off: Automatic
Red on: Manual
Operating Manual
2.1 Manager Service Features
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Time Service (Day/Night/Lunch/Break) button or a Time Service
Switching Mode (Automatic/Manual) button.
Operating Manual
161
2.1 Manager Service Features
162
Operating Manual
Section
3
Customizing Your Phone & System
This chapter shows you how to customize your individual
telephone or PBX according to your needs. Find the desired
setting and program as necessary.
Operating Manual
163
3.1 Personal Programming
3.1
Personal Programming
3.1.1
Programming Information
You can customize your telephone features. For example, you can change the initial settings or button
features according to your needs.
Available Extension
Any extension in the PBX
Required Telephone
A Panasonic Proprietary Telephone (PT), Portable Station (PS)
Conditions
Programming extensions must be idle, on-hook and holding no calls.
3.1.2
Personal Programming
You can program features using the programming mode.
164
•
•
To exit at any time, lift the handset.
To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
•
If you change your desk and extension, refer to "1.3.74 Walking Extension".
Operating Manual
3.1 Personal Programming
Setting Features
The default settings are shown in bold letters. For later reference, place a check mark in the boxes below to
indicate your customized setting.
To enter the programming mode
To program
To exit
PROGRAM
OR
PAUSE
PROGRAM
programming
input
OR
AUTO DIAL
selection &
parameter
STORE
Press PROGRAM
or PAUSE.
Item
Follow
programming
input.
OR
OR
AUTO DIAL
PAUSE
STORE
Press ENTER Follow Selection Press ENTER Press PROGRAM
or STORE.
& Parameter.
or STORE.
or PAUSE.
Programming
Input
Selection & Parameter
PT: The display shows the PBX number, slot number and
port number. (Some IP-PTs may not display the extension
number.)
<example>
Your extension information
0
EXT1050:10308
PBX no.
Port no.
Slot no.
0
PS: The display shows the PS number.
<example>
EXT3001:99001
PS no.
Display Contrast
Selection*1
Preferred display contrast
level from the 4 levels
available
Display Language
Selection
Which display language do
you prefer?
0
0
1
Light
2
Little Light
3
Little Dark
4
Dark
1
English
2
2nd Language
3
3rd Language
4
4th Language
5
5th Language
1
2
Operating Manual
165
3.1 Personal Programming
Item
Display Switching Mode
Would you like the call
duration to be shown
automatically on the display
when answering an outside
call?
Display Backlight
Selection*1
Would you like to turn on
the display backlight of the
KX-T7633/KX-T7636/IPPTs?
Self Labeling Display
Contrast
Preferred display contrast
level from the 4 levels
available for Self Labeling
(KX-NT366 only)
Hot Line
Would you like to dial a
preset number simply by
going off-hook?
Calling Line Identification
Restriction (CLIR)
Should you prevent your
number being displayed on
the called party's
telephone?
Calling/Connected Line
Identification
Presentation (CLIP/
COLP)
Which number should be
displayed on the called
party's telephone?
166
Operating Manual
Programming
Input
0
0
0
1
1
1
1
Selection & Parameter
0
No—Manual (The display keeps
showing all of the outside caller's
information unless you change it to
the call duration manually.)
1
Yes—Automatic (The first line
of the display will change to the
call duration automatically when
you answer an outside call.)
3
4
0
Yes—On in use
1
Yes—always On
2
No—always Off
1
Light
2
Little Light
3
Little Dark
4
Dark
5
desired no. (max. 32 digits)
1
0
Do not use
1
Use
2
0
No—Allows your number to
be displayed
1
Yes—Prevent your number
being displayed
0
Caller ID assigned to your
extension
1
Caller ID assigned on the CO line
being used
3
4
3.1 Personal Programming
Item
Preferred Line
Assignment—Outgoing
Which do you prefer to
seize when you go off-hook
to make calls?
Programming
Input
1
9
Selection & Parameter
0
No line
1
An idle CO line
2 +
CO button no.
(01–36)*2/
(01–84)*3
or
( CO )
3
or
INTERCOM
(PDN)
0
2
0
Intercom (On a PDN extension,
an idle PDN button is selected when
going off-hook.)
No line
The longest ringing line (when
multiple calls arrive)
1
Preferred Line
Assignment—Incoming
Which line do you prefer to
answer when you go offhook?
A CO/ICD Group button
2 +
CO button no.
(01–36)*2/
(01–84)*3
or
A CO/ICD Group button
( CO )
3
(PDN)
0
Alternate Receiving—
Ring/Voice*1
How do you prefer to
receive an intercom call?
Paralleled Telephone*1
Should the single line
telephone in parallel ring?
2
2
1
A PDN button
Ringing (Tone Call)
1
Directly—The party's voice is
heard without ringing.
2
Ring only—Prohibiting the caller
switching to the voice mode.
0
No—The telephone will not ring.
1
Yes—The telephone will ring.
2
Operating Manual
167
3.1 Personal Programming
Item
Forced Answerback
Selection*1
Do you prefer to answer a
call without going off-hook
regardless of the AUTO
ANS button status?
Live Call Screening Mode
Set*1
Which service do you prefer
when a calling party is
recording a message in
your mailbox?
LCS Mode Set (After
Answering)
Would you like to keep
recording after answering
the call in the LCS mode?
Automatic Call Waiting*4
Would you prefer to
automatically hear a call
waiting tone when you
receive a call while already
on the phone?
Manual Call Waiting
How would you prefer to
receive call waiting
notifications for intercom
calls?
Call Waiting Tone Type
Selection
Which type of call waiting
tone do you prefer?
Absent Message
Would you like to show a
message on the caller's
telephone display?
Programming
Input
2
2
2
3
3
3
4
Selection & Parameter
0
No—Disable
1
Yes—Enable
3
0
You can monitor the message
through the telephone speaker.
(Hands-free mode)
1
Only an alarm tone is heard.
(Private mode)
5
0
No—Stop recording
1
Yes—Keep recording
0
No—Off
1
Yes—On
0
No call (Off)
1
Tone (BSS)
6
0
1
2
Voice announcement through
the built-in speaker (OHCA)*5
3
Voice announcement through
the handset (Whisper OHCA)*5
0
Tone 1
1
Tone 2
0
No—Off
2
0
message no. (1–8)
9
168
Operating Manual
Yes—Shows the selected
message.
Yes—Shows your personal
message.
3.1 Personal Programming
Item
Programming
Input
Personal Absent
Message
Creating your personal
message
4
0
/
(for both calls)
Call Forwarding (FWD)/
Do Not Disturb (DND)
To forward or refuse some
or all of your incoming calls
5
1
(for outside calls)
5
2
(for intercom calls)
FWD N/A Timer
To set the timer for "No
Answer" and "Busy/No
Answer"
5
Call Pickup Deny
Should you prohibit other
people from picking up your
calls?
6
Headset Operation*1
Do you use the headset?
6
Executive Busy Override
Deny
Do you prohibit other
people from joining your
conversation?
6
Paging Deny*1
Would you like to prohibit
paging announcements?
6
Key Pad Tone Set*1
Do you prefer to hear the
key pad tone?
6
message (max. 16 characters)
1
FWD/DND
5
Selection & Parameter
0
Off
1
Do Not Disturb (DND)
2 + desired no.
(max. 32 digits)
All—Forward all calls
3 + desired no.
Busy—Forwarded when your
(max. 32 digits)
extension is busy.
4 + desired no.
No Answer—Forwarded when
(max. 32 digits)
you do not answer.
Busy/No Answer—Forwarded
5 + desired no.
when you do not answer or when
(max. 32 digits)
your extension is busy.
(0–120) seconds
(Default: 15 seconds)
3
0
No—Allow
1
Yes—Deny
0
No—Headset off
1
Yes—Headset on
0
No—Allow
1
Yes—Deny
0
No—Allow
1
Yes—Deny
0
No—Off
1
Yes—On
0
1
2
3
4
Operating Manual
169
3.1 Personal Programming
Item
Programming
Input
Selection & Parameter
Background Music
(BGM)*1
Do you want background
music through your
telephone speaker while
on-hook?
6
Bluetooth Registration
To register a Bluetooth
wireless headset on your
extension*6
(KX-NT300 series only)
6
6
Pass key (max. 16 digits)
Bluetooth Removal
To cancel the registration of
a Bluetooth wireless
headset on your
extension*6
(KX-NT300 series only)
6
7
Confirm that the ID of your Bluetooth wireless headset is
displayed.
Extension PIN (Personal
Identification Number)
To set your extension PIN or
change the stored
extension PIN
0
5
1
No—Off
+ BGM no.
(1 digit)
extension PIN
(max. 10 digits) +
To set an extension PIN
ENTER/STORE +
same extension PIN
9
0
stored extension PIN
+
new extension PIN
To change the stored extension PIN
(max. 10 digits) +
ENTER/STORE +
same extension PIN
extension PIN
(max. 10 digits) +
Extension Dial Lock
To prevent other people
from using your telephone
Yes—On
To unlock
0
9
1
extension PIN
(max. 10 digits) +
To lock
1
extension PIN
(max. 10 digits) +
Lock*1
Display
To prevent other people
from seeing your personal
speed dialing directory, call
log, and SVM log
9
2
extension PIN
(max. 10 digits) +
1
170
Operating Manual
To unlock
0
To lock
3.1 Personal Programming
Item
One-touch Dialing
Assignment Mode
Selection
Do you prefer to set the
One-touch dialing only?
Programming
Input
Selection & Parameter
0
No—Normal (Any Flexible CO
buttons can be modified.)
1
Yes—Only One-touch dialing
buttons can be modified. However,
to modify them, there is no need to
enter "2" before the number.
#
*1: Not available for a PS
*2: CO button numbers (25–36) are available only when the Add-on Key Module is attached to your
telephone.
3
* : CO button numbers (25–84) are available only when the Add-on 60 Key Module (KX-NT305) is set up
on the KX-NT300 series telephone (not available for the KX-NT366).
4
* : This setting applies to both outside and intercom calls. For intercom calls, this feature must be enabled
through system programming.
*5: Only available for certain digital proprietary telephone users.
*6: Registering and canceling a Bluetooth wireless headset may take time. Please avoid any interruption
during that time by, for example, going off-hook.
•
WARNING
There is a risk that fraudulent telephone calls will be made if a third party discovers
your password (extension PIN).
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a) Keeping your PIN secret.
b) Selecting a complex, random PIN that cannot be easily guessed.
c) Changing your PIN regularly.
•
After the program number is entered, the program title is displayed.
The programming screen can be changed with the Navigator key (Up or Down).
•
You can select the parameter with the Navigator Key (Up or Down) instead of entering a
number.
Operating Manual
171
3.1 Personal Programming
To store the names and numbers in personal speed dialing
PROGRAM
1
0
personal speed
dialing no. (location no.)
OR
OR
AUTO DIAL
PAUSE
STORE
Press PROGRAM
or PAUSE.
phone no.
Enter 10 and then press ENTER.
Or press STORE.
OR
Enter personal speed dialing number
(location number) (2 digits).
name
*
STORE
STORE
Enter phone number
(max. 32 digits).
Press ENTER
or STORE.
Enter name
(max. 20 characters).
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
•
172
* To enter characters, refer to "1.3.14 Character Entry".
Operating Manual
OR
AUTO DIAL
AUTO DIAL
Press ENTER
or STORE.
3.1 Personal Programming
To edit the names and numbers of personal speed dialing
PROGRAM
1
0
personal speed
dialing no. (location no.)
OR
OR
AUTO DIAL
PAUSE
STORE
Press PROGRAM
or PAUSE.
Enter 10 and then press ENTER.
Or press STORE.
Enter personal speed dialing number
(location number) (2 digits).
To erase a number or character
CLEAR
Press Left or Right
to select a desired part.
Press "CLEAR".
OR
AUTO DIAL
STORE
To insert a number or character
Press ENTER
or STORE.
number/character
Press Left or Right
to select a desired part.
Enter a number or
character.
It will be inserted in front
of the selected part.
3.1.3
Programming Feature Clear
You can reset the settings of the following features on your extension to the default settings with one
operation.
Features
Default Setting
Display Switching Mode
Automatic
Hot Line
Off
Calling Line Identification Restriction (CLIR)
Allow
Calling/Connected Line Identification Presentation (CLIP/
COLP)
Caller ID assigned on your extension
Preferred Line Assignment—Outgoing
Intercom
Preferred Line Assignment—Incoming
The longest ringing line
Alternate Receiving—Ring/Voice
Ringing (Tone Call)
Paralleled Telephone
Paired SLT will ring
Forced Answerback Selection
Disable
Operating Manual
173
3.1 Personal Programming
Features
Default Setting
Live Call Screening Mode Set
Hands-free mode
LCS Mode Set (After Answering)
Stop recording
Automatic Call Waiting
On
Manual Call Waiting—Intercom Calls
On (Tone)
Call Waiting Tone Type Selection
Tone 1
Absent Message
Off
Personal Absent Message
Cleared
Call Forwarding (FWD)/Do Not Disturb (DND)—Intercom Calls/ Off
Outside Calls
FWD N/A Timer
15 seconds
Call Pickup Deny
Allow
Headset Operation
Headset off
Executive Busy Override Deny
Allow
Paging Deny
Allow
Key Pad Tone Set
On
Background Music (BGM)
Off
Data Line Security
Off
Connected Line Identification Restriction [COLR]
Allow
Log-in/Log-out
Log-in
Message Waiting
Off
Timed Reminder
Cleared
To set
PROGRAM
PROGRAM
OR
OR
OR
OR
PAUSE
AUTO DIAL
AUTO DIAL
PAUSE
STORE
STORE
Press PROGRAM
or PAUSE.
•
174
Enter ##.
Press ENTER
or STORE.
Press ENTER
or STORE.
Press PROGRAM
or PAUSE.
The Call Waiting, FWD/DND and Hot Line features may not be cleared by this operation,
depending on system programming.
Operating Manual
3.1 Personal Programming
3.1.4
Customizing the Buttons
You can customize the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key
Modules, and PSs. They can then be used to make or receive outside calls or as feature buttons.
•
•
To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
The buttons in the table below can only be set on certain flexible buttons, as follows:
– Flexible buttons on PTs/Add-on Key Modules/PSs: all buttons can be set.
– Flexible buttons on DSS Consoles: all buttons except CTI and Primary Directory Number
(PDN) buttons can be set.
– Programmable feature (PF) buttons: only the One-touch Dialing button can be set.
To enter the program mode
To program
To exit
To continue
PROGRAM
PROGRAM
programming
input
OR
PAUSE
OR
PAUSE
OR
AUTO DIAL
Press PROGRAM
or PAUSE.
Follow
programming
input.
Press desired
flexible button.
Button
STORE
Press ENTER
or STORE.
Press PROGRAM
or PAUSE.
Programming Input
Loop-CO (L-CO)
Group-CO (G-CO)
#
+ CO line group no. (2 digits)
Single-CO (S-CO)
0
+ CO line no. (3 digits)
Direct Station Selection (DSS)
1
+ Extension no.
One-touch Dialing*1
2 *²
+ Desired no. (max. 32 digits)
Incoming Call Distribution Group (ICD
3
0 + Incoming call distribution group extension no. (+
Group)
+ delayed ringing time [0–7])*3
Message
Message for Another Extension
4
#
0
4
0 + Extension no./Incoming call distribution group
extension no.
Call Forwarding (FWD)/Do Not
Disturb (DND)—Both calls
4
1
FWD/DND—Outside calls
4
2
FWD/DND—Intercom calls
4
3
Operating Manual
175
3.1 Personal Programming
Button
176
Programming Input
Group FWD—Both calls
4
4
+ Incoming call distribution group extension no.
Group FWD—Outside calls
4
5
+ Incoming call distribution group extension no.
Group FWD—Intercom calls
4
6
+ Incoming call distribution group extension no.
Account
4
8
Conference
4
9
Terminate
5
0
External Feature Access (EFA)
5
1
Call Park
5
3
Call Park (Automatic Park Zone)
5
3
Call Log*4
5
4
Call Log for ICD Group*4
5
4
Log-in/Log-out
5
5
Log-in/Log-out of a specified group
5
5
Log-in/Log-out for all groups
5
5
Hurry-up
5
6
Wrap-up
5
7
System Alarm*4
5
8
Time Service (Day/Night/Lunch/
Break)
5
9
Answer*4
6
0
Release*4
6
1
Toll Restriction (TRS)
6
2
Calling Line Identification Restriction
(CLIR)
6
4
Connected Line Identification
Restriction (COLR)
6
5
Headset*4
6
7
Operating Manual
+ Parking zone no. (2 digits)
+ Incoming call distribution group extension no.
+ Incoming call distribution group extension no.
+ Incoming call distribution group extension no.
+ 0/1/2/3*5 (+
#
+ Tenant no.)
+ Toll Restriction (TRS) Level (1–7)
3.1 Personal Programming
Button
Programming Input
Time Service Switching Mode
(Automatic/Manual)
6
8
(+ Tenant no.)
Network Direct Station Selection
(NDSS)*6
6
9
+ Another PBX extension no.
CTI
7
0
Primary Directory Number (PDN)
7
1
Secondary Directory Number (SDN)
7
2
Check-in*4
8
0
Check-out*4
8
1
Two-way Record*8
9
0
+ Voice mail floating extension no.*9
Two-way Transfer*8
9
1
+ Voice mail floating extension no.*9
One-touch Two-way Transfer*8
+ Extension no. +
#
+ delayed ringing time (0–7)*7
9
1 + Voice mail floating extension no.*9 +
no./Incoming call distribution group extension no.
Live Call Screening (LCS)*8
9
2
Voice Mail Transfer*8
9
4
#
+ Extension
+ Voice mail floating extension no.*9
Operating Manual
177
3.1 Personal Programming
•
*1 " ," "#," FLASH/RECALL, PAUSE, Secret (INTERCOM) and TRANSFER can also be
stored.
If you do not want to display the stored number when making a call, press the Secret
(INTERCOM) button before and after the numbers you wish to conceal.
If you store an outside party's number, you should first store a line access number.
If you need to enter an account code, you can enter the specified account code before the
line access number.
<Example>
Secret
49
1234
Account code feature no. Account code
178
#
9
[ 123 4567 ]
Account code delimiter
Automatic line
access number
Phone number
•
*2 For a PF button, "2" is not required to enter before the desired number.
•
*3 Depending on the settings of your PBX, you may be required to enter delayed ringing time
(0: Immediate, 1: 1 ring, 2: 2 rings, 3: 3 rings, 4: 4 rings, 5: 5 rings, 6: 6 rings, 7: No ring). In
this case, you can automatically join a new ICD group by creating a button for that group.
•
*4 This button is not available for a PS.
•
*5 0: Day/Night/Lunch/Break, 1: Day/Night/Break, 2: Day/Night/Lunch, 3: Day/Night
•
*6 The button may not be available depending on the networking method in use or the settings
of the PBX.
•
*7 It is possible to set delayed ringing for each SDN button.
•
*8 This button is used for the integrated voice mail features.
•
•
•
*9 The default voice mail floating extension number is 500.
To exit at any time, lift the handset.
For KX-NT366 users: After customizing a flexible button, you can set the displayed text for
Self Labeling. To enter characters, refer to "1.3.14 Character Entry".
•
You can select the parameter with the Navigator key (Up or Down) instead of entering a
number.
Operating Manual
3.1 Personal Programming
<Programming Example: Customizing a CO button as a One-touch Dialing button using Secret
dialing>
[Initial Display]
OCT.27
PROG
03:13PM
INFO
RING
THU
3
Enter the programming input (
and desired phone number.
MENU
EXIT
1
PROGRAM
Press
PROG
PAUSE
or
or
4
2
(CO)
INTERCOM
EXIT
5
9123[
CLEAR ENTER
INTERCOM
Press
again after entering the number
you want to keep secret.
Single Line-001
EXIT CLEAR ENTER
EXIT
6
9123
CLEAR ENTER
Press
in front of the number you
want to keep secret.
Program No?->
EXIT CONT NEXT
Press
2 ),
Press
9123[4567]
CLEAR ENTER
to store.
Operating Manual
179
3.1 Personal Programming
To distinguish the ringing tones for each CO, ICD Group, PDN, SDN, or INTERCOM button
(Digital proprietary telephone only)
To continue
(CO)
(CO)
OR
OR
(ICD Group)
(ICD Group)
OR
OR
(PDN)
(PDN)
PROGRAM
tone type no.
Press
PROGRAM.
OR
OR
(SDN)
(SDN)
OR
OR
INTERCOM
INTERCOM
Press CO, ICD Group,
PDN, SDN, or
INTERCOM button.
*
R.Tone
Enter tone type
number.
OR
AUTO DIAL
STORE
Press ENTER or
STORE.
Press CO, ICD Group,
PDN, SDN, or
INTERCOM button.
PROGRAM
Press
PROGRAM.
•
•
* Available tone types vary depending on the telephone you are using:
– KX-NT300 series/KX-NT136/KX-T7600 series: Tone types "01" to "30" (01–20: tone, 21–
30: melody) are available.
– KX-NT265: Only tone types "01" to "08" are available.
It is possible to enter a tone type number from "09" to "30", but you will hear tone type
"01".
– Other telephones: Only tone types "01" to "08" are available.
It is possible to enter a tone type number from "09" to "30", but you will hear tone type
"02".
Only one ringing tone can be selected for all PDN buttons on your extension.
To clear the button
To continue
PROGRAM
PROGRAM
2
OR
PAUSE
OR
OR
AUTO DIAL
PAUSE
STORE
Press PROGRAM
or PAUSE.
180
Operating Manual
Press desired
flexible button.
Enter 2.
Press ENTER or
STORE.
Press PROGRAM
or PAUSE.
3.2 Manager Programming
3.2
Manager Programming
3.2.1
Programming Information
The manager can program the following item.
•
Other Extensions Control
Available Extension
The extension assigned as a manager
Required Telephone
A Panasonic Proprietary Telephone with display (over 2 lines)
(e.g., KX-NT343, KX-NT346, KX-T7636)
Manager Password
To enter programming mode, the manager password (max. 10 digits) is required. (Default: 1234)
WARNING
•
The PBX has a default password preset. For security, change the password the first time that
you program the PBX.
•
It is strongly recommended that a password of 10 numbers or characters be used for
maximum protection against unauthorized access. For a list of numbers and characters that
can be used in the password, refer to "1.3.14 Character Entry".
•
To avoid unauthorized access to the PBX, keep the password secret. If it becomes known to
others, the PBX may be misused.
•
Change the password periodically.
Conditions
The programming extension must be idle, on-hook and holding no calls.
Operating Manual
181
3.2 Manager Programming
3.2.2
Manager Programming
Changing the Settings and Extension Control
To enter the program mode
To program
To exit
To continue
PROGRAM
manager
password
1
OR
PAUSE
Press PROGRAM
or PAUSE.
Enter
1.
Enter manager
password.
PROGRAM
OR
HOLD
programming
input
PAUSE
Follow
programming
input.
Press
HOLD.
Item
Press PROGRAM
or PAUSE.
Programming Input
Changing the manager password.
0
0
+
+ Password (max. 10 digits) +
Locking/unlocking other extensions.
(Remote Extension Dial Lock)
9
0
+
+ Extension no. +
0
1
(to lock)/
(to unlock) +
Clearing the PIN and PIN lock for extensions.
9
1
+
+ Extension no. +
Clearing the PIN and PIN lock for verification
codes.
9
2
+
+ Verification code +
9
3
+
+ Verification code + PIN (max. 10 digits)
Setting the verification code PIN.
+
•
WARNING
There is a risk that fraudulent telephone calls will be made if a third party discovers
your password (verification code PIN).
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a) Keeping your PIN secret.
b) Selecting a complex, random PIN that cannot be easily guessed.
c) Changing your PIN regularly.
182
Operating Manual
3.2 Manager Programming
<Programming Example: Changing the manager password>
[Initial Display]
OCT.27
PROG
03:13PM
INFO
RING
THU
4
Enter the programming input
( 0
0 ).
MENU
SHIFT
1
PROGRAM
Press
PROG
PAUSE
or
Manager Password
EXIT ENTER NEXT
or
5
Press
or
ENTER
Program No?->
EXIT CONT NEXT
SHIFT
2
Enter
->
1234
CLEAR NEXT
The current manager password appears.
1
6
Enter a new manager password
(max. 10 digits).
Enter Password
EXIT
ENTER
3
SHIFT
->
1117
CLEAR NEXT
Enter the current manager password.
Mngr-Pgm No?->
SHIFT EXIT
NEXT
7
Press
to store.
Operating Manual
183
3.3 System Programming
3.3
System Programming
3.3.1
Programming Information
You can customize your system according to your requirements.
[Your system already has default settings (factory installed).]
The programming is shown below. (Program number)
•
The date and time [000]
•
System speed dialing numbers and names [001]/[002]
•
Extension number and name [003]/[004]
Available Extension
The extension allowed through COS programming
Required Telephone
A Panasonic Proprietary Telephone with display (over 2 lines)
(e.g., KX-NT343, KX-NT346, KX-T7636)
System Password
To enter programming mode, the system password (max. 10 digits) is required. (Default: 1234)
WARNING
•
The PBX has a default password preset. For security, change the password the first time that
you program the PBX.
•
It is strongly recommended that a password of 10 numbers or characters be used for
maximum protection against unauthorized access. For a list of numbers and characters that
can be used in the password, refer to "1.3.14 Character Entry".
•
To avoid unauthorized access to the PBX, keep the password secret. If it becomes known to
others, the PBX may be misused.
•
Change the password periodically.
Conditions
The programming extension must be idle, on-hook and holding no calls.
List
Before programming, decide the settings and write them down. Your notes will provide a useful record of the
programming for future reference. Your dealer also has programming records which contain all of the system
programming. You may ask for photocopies of these tables to be aware of the facilities and features
available.
184
Operating Manual
3.3 System Programming
Icon Descriptions
Fixed Buttons
KX-NT300
KX-NT136/KX-T7600 KX-T7200/KX-T7400*
Function
REDIAL
PREVIOUS (PREV)
SP-PHONE
NEXT
FWD/DND
CONF
AUTO DIAL
STORE (ENTER)
STORE
None
SHIFT
SHIFT
PAUSE
PAUSE
SHIFT
SHIFT
PROGRAM
AUTO ANS
MESSAGE
PAUSE
HOLD
HOLD
AUTO ANSWER
PROGRAM
END
MESSAGE
SELECT
MUTE
MUTE
FLASH/
RECALL
FLASH/RCL
TRANSFER
TRANSFER
INTERCOM
INTERCOM
*:
Back to Previous Menu
(CANCEL)
FLASH
CLEAR
SECRET
The buttons shown in this column are from KX-T7400 series PTs.
Operating Manual
185
3.3 System Programming
Procedure
The basic steps are shown below.
1. Entering the programming mode
PROGRAM
system password
OR
PAUSE
Press PROGRAM
or PAUSE.
Enter
.
Enter system password.
2. Programming
You can enter each program number (3 digits).
•
To exit the programming mode at any time, lift the handset.
3. Exiting the mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
•
186
To exit the programming mode at any time, lift the handset.
Operating Manual
3.3 System Programming
3.3.2
System Programming
[000] Date & Time
The proprietary telephones display the current date and time while on-hook.
0
0
date
year
0
SELECT
(AUTO ANS/MUTE,
MESSAGE)
Enter 000.
Press ENTER.
Enter year
(00–99).
Press SELECT Press Right.
for month.
hour
Press ENTER. Press NEXT.
To end
Enter hour
(01–12).
Enter date
(01–31).
minute
Enter minute
(00–59).
SELECT
(AUTO ANS/MUTE,
MESSAGE)
Press SELECT
to choose AM or PM.
END
(HOLD)
Press ENTER. Press END.
•
•
•
•
•
After changing the desired values, you can press the ENTER button. You do not have to
perform the rest of the steps.
The clock starts immediately after the ENTER button is pressed.
You cannot leave a value empty.
You can clear the entry by pressing the CLEAR button.
To confirm your entry after storing data:
– The STORE button light: Lights red.
– Confirmation Tone:
One beep: Your entry is accepted.
Three beeps: Your entry is rejected.
Operating Manual
187
3.3 System Programming
[001] System Speed Dialing Number
You can store the phone numbers of frequently dialed numbers.
0
0
1
Enter 001.
Press ENTER.
To end
system speed dialing
no. (location no.)
phone no.
Enter system speed
dialing number (location
number) (3 digits).
Enter phone
number (max.
32 digits).
Press ENTER.
Press END.
To continue
OR
Press NEXT.
Press PREV.
Press CANCEL.
•
If the desired number is more than 32 digits, divide the number and store it into more than
one speed dialing number.
•
" ", "#", FLASH/RECALL, PAUSE, and Secret (INTERCOM) can also be stored.
If you do not want to display the stored number when making a call, press the Secret
(INTERCOM) button before and after the numbers you wish to conceal.
If you store an outside party's number, you should first store a line access number.
If you need to enter an account code, you can enter the specified account code before the
line access number.
<Example>
Secret
49
1234
Account code feature no. Account code
188
Operating Manual
#
9
[ 123 4567 ]
Account code delimiter
Automatic line
access number
Phone number
3.3 System Programming
[002] System Speed Dialing Name
You can store the name associated with the speed dialing number. These names are displayed when
making calls using the display operation. To enter characters, refer to "1.3.14 Character Entry".
To end
0
0
system speed dialing
no. (location no.)
2
Enter 002.
name
Press ENTER. Enter system speed
dialing number (location
number) (3 digits).
Enter name
(max. 20
characters).
Press ENTER.
Press END.
To continue
OR
Press NEXT. Press PREV.
Press CANCEL.
[003] Extension Number
You can assign an extension number to each extension.
To end
0
0
Enter 003.
3
Press ENTER.
extension no.
new
extension no.
Enter extension
number.
Enter new
extension number.
Press ENTER.
Press END.
To continue
OR
Press NEXT. Press PREV.
Press CANCEL.
•
•
The leading number(s) should be the same as the number(s) assigned for Flexible
Numbering.
A duplicate entry is invalid.
Operating Manual
189
3.3 System Programming
[004] Extension Name
You can store the name of an extension user. This is useful if you want to know who is calling, or who you
are calling when making an intercom call using the directory.
To enter characters, refer to "1.3.14 Character Entry".
To end
0
0
4
Enter 004.
Press ENTER.
extension no.
name
Enter extension
number.
Enter name
(max. 20
characters).
Press ENTER.
To continue
OR
Press NEXT. Press PREV.
Press CANCEL.
190
Operating Manual
Press END.
Section
4
Appendix
This chapter provides the Troubleshooting, the Feature
Number Table and Tone List. Check the Troubleshooting
section before consulting your dealer.
Operating Manual
191
4.1 Troubleshooting
4.1
Troubleshooting
4.1.1
Troubleshooting
Troubleshooting
Problem
The telephone does not work properly.
The telephone does not respond when
buttons are pressed.
Remedy
•
Confirm with your manager that your settings are
correct.
•
If the problem persists, consult your dealer.
•
•
The telephone is locked.
Unlock your telephone. (
1.3.24 Extension
Dial Lock, 2.1.5 Remote Extension Dial Lock)
Your telephone is connected to an eXtra Device
Port.
System programming is required. Consult your
dealer.
Some features do not work.
•
System management may restrict certain features.
•
Consult your manager.
The feature numbers have changed.
Confirm the revised number and try again.
192
Even though following the manual
instructions, none of the operations
work when using a proprietary
telephone.
•
The paralleled single line telephones do
not ring.
•
The telephone does not work using the
personal settings or with other settings.
(One-touch dialing, forwarding
destination, etc.)
•
Operating Manual
The Intercom line was not seized. The seized line,
when going off-hook, was changed by personal
setting. (
3.1.2 Personal Programming)
In the manual, going off-hook means an Intercom
line is seized.
If the setting has been changed, press the INTERCOM
or PDN button after going off-hook and follow the
instructions.
"No ring" may be selected.
Change the setting to ring. (
Telephone)
1.3.48 Paralleled
The extension line has been changed. The previous
telephone's settings have not been cleared.
Clear the settings and then program your desired
settings again. (
1.3.25 Extension Feature Clear,
3.1.2 Personal Programming, 3.1.4 Customizing the
Buttons)
4.1 Troubleshooting
Problem
My proprietary telephone does not have
a feature button.
Remedy
•
Some models do not have the feature button.
(
Change a flexible button to the desired button.
3.1.4 Customizing the Buttons)
Enter the specified feature number instead of the
feature button. (
1.1.1 Before Operating the
Telephones)
A reorder tone is audible or "Restricted"
is displayed.
•
The telephone is locked.
•
Unlock your telephone. (
1.3.24 Extension
Dial Lock, 2.1.5 Remote Extension Dial Lock)
Toll restriction is activated.
Consult your manager.
•
An account code is required. (
1.3.2 Account
Code Entry, 1.3.67 Verification Code Entry, 1.3.73
Walking COS)
I cannot make an outside call using the
One-touch Dialing button or speed
dialing.
•
A line access number was not stored.
I cannot remember the feature numbers.
•
If the feature numbers have been changed from
the default values, write the new feature numbers in
the table in "4.2.1 Feature Number Table".
•
Ask your dealer to change the feature numbers for
easier use.
•
The time limit has run out. (
1.3.11 Call Transfer,
1.3.16 Conference, Unattended)
While talking to an outside party, the line
is disconnected.
A line access number is required for outside calls.
(
1.2.1 Making Calls, 3.1.4 Customizing the
Buttons)
Consult your dealer to extend the time limit, if
necessary.
Redialing does not function.
•
The stored number was more than 32 digits or an
extension number. (
1.3.58 Redial, Last Number)
I cannot have a conversation using the
Bluetooth headset.
•
Make sure that the headset is properly registered
to the module.
•
Make sure that the headset is properly charged
according to the manual of the headset.
•
Remove the wired headset from the headset jack.
Priority is given to the wired headset when both are
connected.
I cannot register, de-register, or confirm
the ID of the Bluetooth headset.
•
Make sure that the module is properly installed in
the IP-PT.
The personal computer and fax machine
communication failed.
•
An indication tone may have interrupted
communication. (
1.3.17 Data Line Security)
Operating Manual
193
4.1 Troubleshooting
Problem
Remedy
I do not want to show my telephone
number to the calling or called party's
telephone.
•
(
1.3.53 Private Network Features—CLIR (Calling
Line Identification Restriction), 1.3.55 Private Network
Features—COLR (Connected Line Identification
Restriction))
I want to show my telephone number to
the calling or called party's telephone.
•
(
1.3.52 Private Network Features—CLIP (Calling
Line Identification Presentation), 1.3.54 Private
Network Features—COLP (Connected Line
Identification Presentation))
I cannot send a call waiting tone to the
dialed extension.
•
The other party has not set the Call Waiting
feature.
(
1.3.13 Call Waiting Tone, 1.3.45 OHCA (Offhook Call Announcement), 1.3.76 Whisper OHCA)
The other party has set Data Line Security.
(
1.3.17 Data Line Security)
•
I forgot the password.
•
Ask the manager to assist you.
(
2.1.5 Remote Extension Dial Lock)
The background music started suddenly.
•
Turn off the music.
(
1.3.5 BGM (Background Music), 2.1.2 External
BGM (Background Music))
I do not want to display a number which
is stored in memory.
•
Conceal the number.
(
Storing New Names and Numbers, 3.1.4
Customizing the Buttons)
I want to confirm my extension number.
•
(
Your Extension Number in 1.1.1 Before
Operating the Telephones)
The date and time are not correct.
•
Set the date and time by system programming.
(
[000] Date & Time in 3.3.2 System
Programming)
The display is not shown well.
•
(
I want to distinguish the tones.
•
(
To distinguish the ringing tones for each CO, ICD
Group, PDN, SDN, or INTERCOM button (Digital
proprietary telephone only), 3.1.4 Customizing the
Buttons)
The MESSAGE button light lit.
•
Another extension left you a message waiting
indication while you were on the phone or away
from your desk.
An SDN button on my extension does not
work.
•
A PDN button is not assigned on the extension
corresponding to your SDN button.
(
194
Change the Display contrast level.
3.1.2 Personal Programming)
Operating Manual
Create a PDN button on the desired extension.
3.1.4 Customizing the Buttons)
4.2 Feature Number Table
4.2
Feature Number Table
4.2.1
Feature Number Table
Numbers listed below are the default settings. There are flexible feature numbers and fixed feature numbers.
If you change the flexible feature numbers, fill in your assigned numbers (new) in the list for future reference.
Default
(New)
Feature (While dial tone is heard)
Additional digits
1.2.1 Making Calls
Operator Call
0
(
Automatic Line Access
)
9
(
CO Line Group Access
8
(
1.3.1 Absent Message
– To set
outside phone no.
)
CO line group no. (2 digits) + outside phone no.
)
750
(
)
– To cancel
1–9 (+ parameter) + #
0
1.3.2 Account Code Entry
account code + # + outside phone no.
49
(
)
1.3.4 Automatic Callback Busy (Camp-on)
Automatic Callback Busy Cancel
46
(
1.3.5 BGM (Background Music)
– To select
)
751
(
)
– To cancel
BGM no. (1 digit)
0
1.3.6 Call Hold
Call Hold/Call Hold Retrieve
50
(
)
Call Hold Retrieve
– Specified with a held line number
– Specified with a holding extension number
)
1.3.8 Call Park
– To retrieve
extension no. which has a held call
51
(
– To set
CO line no. which is held (3 digits)
53
(
)
52
(
)
parking zone no. (2 digits)/
stored parking zone no. (2 digits)
Operating Manual
195
4.2 Feature Number Table
Default
(New)
Feature (While dial tone is heard)
Additional digits
1.3.9 Call Pickup
Call Pickup
– Group
(
– Directed
)
extension no.
41
(
Call Pickup Deny
– To deny
group no. (2 digits)
40
)
720
(
)
– To allow
1
0
1.3.12 CALL WAITING FEATURES
Answering Call Waiting in the PBX
50
(
Answering Call Waiting from the Telephone
Company
)
60
(
)
1.3.13 Call Waiting Tone
1.3.45 OHCA (Off-hook Call Announcement)
1.3.76 Whisper OHCA
– For intercom calls
(No call/Tone/OHCA/Whisper OHCA)
(
– For outside calls
(No tone/Tone)
(
731
0 (No call)/1 (Tone)/2 (OHCA)/3 (Whisper
OHCA)
0 (No tone)/1 (Tone)
732
1.3.17 Data Line Security
– To set
)
)
730
(
)
– To cancel
1
0
1.3.18 DISA (Direct Inward System Access)
Calling through DISA
– To an extension
(In All Security Mode only)
– To an outside party
(In Trunk Security Mode/All Security Mode
only)
196
Operating Manual
47
(
)
your extension no./( + verification code) +
extension PIN/verification code PIN + extension
no.
your extension no./( + verification code) +
extension PIN/verification code PIN + outside
phone no.
4.2 Feature Number Table
Default
(New)
Feature (While dial tone is heard)
Additional digits
1.3.19 DND (Do Not Disturb)
– Both Calls
0 (Cancel)/
710
(
– Outside Calls
)
1 (Set)
711
(
– Intercom Calls
)
712
(
1.3.20 Door Open
)
doorphone no. (2 digits)
55
(
1.3.21 Doorphone Call
)
doorphone no. (2 digits)
31
(
1.3.22 EFA (External Feature Access)
)
service code
60
(
)
1.3.23 Executive Busy Override
Executive Busy Override Deny
– To prevent
– To allow
1
733
(
)
0
1.3.24 Extension Dial Lock
– To lock
1
77
(
)
– To unlock
– To make an outside call while your
extension is locked
0 + extension PIN
(
1.3.25 Extension Feature Clear
)
790
(
1.3.26 Extension PIN (Personal Identification
Number)
your extension no. + extension PIN + phone no.
47
)
799
(
)
– To set
1 + extension PIN + # + same extension PIN + #
– To cancel
0 + stored extension PIN
1.3.27 External Relay
relay no. (2 digits)
56
(
)
Operating Manual
197
4.2 Feature Number Table
Default
(New)
Feature (While dial tone is heard)
Additional digits
1.3.29 FWD (Call Forwarding)
– Both Calls
0 (Cancel)/
710
(
– Outside Calls
)
2 (All calls) + phone no. + #/
711
(
– Intercom Calls
)
3 (Busy) + phone no. + #/
712
(
)
4 (No Answer) + phone no. + #/
5 (Busy/No Answer) + phone no. + #/
7 (Follow Me) + your extension no./
8 (Follow Me Cancel) + your extension no.
–To set the timer for "No Answer" and
"Busy/No Answer"
00–99 (second)
713
(
)
Call Forwarding (FWD) for your Incoming Call
Distribution Group
– Both Calls
714
(
– Outside Calls
)
715
(
– Intercom Calls
)
716
(
1.3.34 Hot Line
– To store
1 (Set) + ICD group extension no. + phone no.
+ #/0 (Cancel) + ICD group extension no.
)
740
(
)
2 + phone no. + #
– To set
1
– To cancel
0
1.3.37 ICD Group Features—Incoming Call
Queue Monitor*1
ICD group extension no.
739
(
)
1.3.38 ICD Group Features—Log-in/Log-out
Log-in
Log-out
736
(
To enter/leave Not Ready mode
Operating Manual
0 + ICD group extension no./
1 (Not Ready)/0 (Ready)
735
(
198
1 + ICD group extension no./
)
)
4.2 Feature Number Table
Default
(New)
Feature (While dial tone is heard)
Additional digits
1.3.42 Message Waiting
For a caller
– To leave/cancel
70
(
)
1/0 + extension no.
For a called extension
– To call back
2
– To clear
0 + your extension no.
1.3.47 Paging
Group Paging
– To answer
)
43
(
– To deny
– To allow
)
1
721
(
1.3.48 Paralleled Telephone
– Ring
paging group no. (2 digits)
33
(
)
0
)
1
39
(
– No Ring
0
1.3.50 Printing Message
1.3.52 Private Network Features—CLIP
(Calling Line Identification Presentation)
message no. (+ parameter) + #
761
(
)
7 2
(
)
– Public
1
– Your extension
2
1.3.53 Private Network Features—CLIR
(Calling Line Identification Restriction)
7 1
(
)
– To show
0
– To prevent
1
1.3.54 Private Network Features—COLP
(Connected Line Identification Presentation)
7 2
(
)
– Public
1
– Your extension
2
1.3.55 Private Network Features—COLR
(Connected Line Identification Restriction)
7 0
(
)
– To show
0
– To prevent
1
1.3.56 Private Network Features—TIE Line
Access
7
(
private phone no.
)
Operating Manual
199
4.2 Feature Number Table
Default
(New)
Feature (While dial tone is heard)
1.3.58 Redial, Last Number
Additional digits
#
(
)
1.3.61 Speed Dialing, Personal
– To store
30
(
)
(
)
personal speed dialing no. (2 digits) + outside
phone no. + #
– To dial
+ personal speed dialing no. (2 digits)
1.3.62 Speed Dialing, System
– To dial
system speed dialing no. (3 digits)
(
)
1.3.63 SVM (Simplified Voice Message)
Recording a Normal Greeting Message
–
To record
1
38
(
)
–
To play back
2
–
To clear
0
Recording a Greeting Message for Each Time
Mode
–
To record
8 + 0 (Day)/1 (Night)/2 (Lunch)/3 (Break) + 1
–
To play back
8 + 0 (Day)/1 (Night)/2 (Lunch)/3 (Break) + 2
–
To clear
8 + 0 (Day)/1 (Night)/2 (Lunch)/3 (Break) + 0
To leave a voice message directly to another
extension's message box
# + 6 + extension no.
Listening to Voice Messages Left by Callers
3
Redirecting Your Calls to Your Message Box
–
Both Calls
(
–
Outside Calls
)
)
2 (All Calls) + floating extension no. for the SVM
feature*2 + #/
)
3 (Busy) + floating extension no. for the SVM
feature*2 + #/
711
(
–
0 (Cancel)/
710
Intercom Calls
712
(
4 (No Answer) + floating extension no. for the
SVM feature*2 + #/
5 (Busy/No Answer) + floating extension no. for
the SVM feature*2 + #
200
Operating Manual
4.2 Feature Number Table
Default
(New)
Feature (While dial tone is heard)
Additional digits
1.3.64 TAFAS (Trunk Answer From Any Station)
– Calls through an external speaker
1.3.65 Timed Reminder
– To set
speaker no. (1 digit)
42
(
)
760
(
)
– To cancel
12H: 1 + time (hour/minute) + 0 (AM)/1 (PM) +
0 (once)/1 (daily)
24H: 1 + time (hour/minute) + 0 (once)/1 (daily)
0
1.3.67 Verification Code Entry
47
(
)
+ verification code + verification code PIN +
phone no.
1.3.71 Voice Mail Features—Voice Mail
Integration
– Both Calls
0 (Cancel)/
710
(
– Outside Calls
)
2 (All Calls)/
711
(
– Intercom Calls
)
3 (Busy)/
712
(
)
4 (No Answer)/
5 (Busy/No Answer)
+ voice mail floating extension no.*3 + #
1.3.72 Wake-up Call*4
– To set
76
(
)
12H: 1 + extension no. + hour/minute + 0 (AM)/
1 (PM) + 0 (once)/1 (daily)
24H: 1 + extension no. + hour/minute + 0
(once)/1 (daily)
– To cancel
0 + extension no.
– To confirm
2 + extension no.
1.3.73 Walking COS
– To make a call or set features from another
extension
47
(
)
your extension no. + extension PIN + phone no./
feature no.
– To make a call or set features through DISA
1.3.74 Walking Extension
your extension no. + extension PIN
727
(
)
1.3.75 Walking Extension, Enhanced
–
To set an extension status to Serviceout
–
To set an extension status to Servicein
#
727
(
)
+ your extension no. + extension PIN
Operating Manual
201
4.2 Feature Number Table
Default
(New)
Feature (While dial tone is heard)
1.3.77 Wireless XDP Parallel Mode
– To set
Additional digits
48
(
)
– To cancel
0
2.1.2 External BGM (Background Music)*5
– To start
35
(
)
– To stop
2.1.3 OGM (Outgoing Messages)*5
– To record
external pager no. (1 digit)/
digit)
+ BGM no. (1
external pager no. (1 digit)/
+0
36
(
)
– To play back
1 + OGM floating extension no.*6
2 + OGM floating extension no.*6
– To record from an external BGM (MOH)
port
3 + BGM port no. (1 digit) + OGM floating
extension no.*6
– To clear
2.1.4 Private Network Features—NDSS
(Network Direct Station Selection) Monitor
Release*5
1 + paired wired extension no.
0 + OGM floating extension no.*6
another PBX extension no. + #
784
(
)
2.1.5 Remote Extension Dial Lock
– To unlock
(
– To lock
)
extension no.
783
(
2.1.6 Time Service Mode Control*7
– Day/Night/Lunch/Break
extension no.
782
)
780
(
)
0/1/2/3
*1 : Supervisor only
*2 : The default floating extension number for the SVM feature is 591.
*3 : The default voice mail floating extension number is 500.
*4 : Hotel operator only
*5 : Manager only
*6 : The default of OGM floating extension numbers is 5xx (xx: two-digit number of message).
*7 : Manager and preprogrammed extension user only
202
Operating Manual
4.2 Feature Number Table
Feature (While busy, DND or call tone is heard)
Call Waiting (BSS [Busy Station Signaling])
Default
1
DND Override
1.3.3 Alternate Calling—Ring/Voice
1.3.4 Automatic Callback Busy (Camp-on)
6
1.3.7 Call Monitor
5
1.3.23 Executive Busy Override
3
1.3.42 Message Waiting
4
Feature (While dialing or talking)
Conference
Fixed
Number
3
1.3.20 Door Open
From any extension while talking to the doorphone
5
Operating Manual
203
4.3 Tone
4.3
Tone
4.3.1
Tone
While on-hook
Ring Tones
The following tones are
programmable allowing
recognition of call type (Outside,
Intercom or Doorphone).
Tone 1
1s
Tone 2
1s
Tone 3
Tone 4
1s
1s
When going off-hook
Dial Tones
Tone 1
Normal
204
Operating Manual
1s
4.3 Tone
Tone 2
•
•
1s
When there are messages
that have previously been
listened to and no new
messages recorded by the
SVM feature
When any of the following
features are set:
•
Absent Message
•
Background Music
•
Call Forwarding
•
Call Pickup Deny
•
Call Waiting
•
Do Not Disturb
•
Extension Dial Lock
•
Executive Busy Override
Deny
•
Hot Line
•
Timed Reminder
Tone 3
•
•
•
•
•
•
1s
After pressing
TRANSFER or Recall/
hookswitch to hold a call
temporarily (e.g., Call
Splitting)
When the recording
space of the Simplified
Voice Message feature
becomes almost full
While a called PS is
being searched
When Account Code
Entry is performed
When answering a
Timed Reminder call with
no message
When answering an
external sensor call
Tone 4
1s
Message waiting indication was
received.
When you make calls
Busy Tone
1s
Operating Manual
205
4.3 Tone
Reorder Tone
1s
The CO line you tried to seize is
not assigned or denied.
Ringback Tones
Tone 1
1s
Tone 2
1s
Do Not Disturb (DND) Tone
1s
The dialed extension is refusing
incoming calls.
While off-hook
Indication Tones
Tone 1
15 s
Call waiting tone
Tone 2
15 s
A call is on hold longer than the
specified time.
When talking to an outside party
Warning Tone
1s
This tone is sent 15, 10 and 5
seconds before the specified time
for disconnection.
When setting the features or programming
Confirmation Tones
Tone 1
The feature setting was set
successfully.
206
Operating Manual
1s
4.3 Tone
Tone 2
1s
Before receiving a page through
an external speaker
Tone 3
1s
Before the following features
activate:
•
Retrieving a held call
•
Picking up another call
•
Paging/Answering a
paging announcement
•
Answering the call
through a speaker
Tone 4
1s
Establishing or leaving a
conference
Tone 5
1s
A call has been put on hold.
Operating Manual
207
4.3 Tone
208
Operating Manual
Index
Operating Manual
209
Index
Symbols
Call Pickup Deny
42, 196
Call Splitting
42
44
Call Transfer
47, 203
Call Waiting
47
CALL WAITING FEATURES
Call Waiting Tone
47, 52
168
Call Waiting Tone Type Selection
48, 196
Call Waiting, Answering from PBX
Call Waiting, Answering from Telephone Company
51, 196
168
Call Waiting, Automatic
168
Call Waiting, Manual
Call, To PDN Extension
105
109, 166, 199
Calling Line Identification Presentation (CLIP)
109, 166, 199
Calling Line Identification Restriction (CLIR)
Calling Line Identification Restriction (CLIR) Button
24, 176
29
Calling, Outside Party
61
Calling, Through DISA
Camp-on —> Automatic Callback Busy
34, 203
23
CANCEL Button
53
Character Entry
Check-in Button
25, 177
25, 177
Check-out Button
109, 166, 199
CLIP —> Calling Line Identification Presentation
CLIR —> Calling Line Identification Restriction
109, 166, 199
29, 195
CO Line Group Access
110, 166, 199
COLP —> Connected Line Identification Presentation
COLR —> Connected Line Identification Restriction
110, 199
22
CONF (Conference) Button
55
Conference
Conference (Three-party), Leaving
59
24, 176
Conference Button
60
Conference, Unattended
Confirmation Tones
206
110, 166, 199
Connected Line Identification Presentation (COLP)
110, 199
Connected Line Identification Restriction (COLR)
Connected Line Identification Restriction (COLR) Button
24, 176
27
Connection Example
25, 177
CTI Button
[000] Date & Time
187
188
[001] System Speed Dialing Number
189
[002] System Speed Dialing Name
[003] Extension Number
189
190
[004] Extension Name
A
Absent Message
32, 168, 195
32, 169
Absent Message, Personal
24, 176
Account Button
Account Code Entry
33, 195
34, 203
Alternate Calling—Ring/Voice
167
Alternate Receiving—Ring/Voice
Answer Button
22, 24, 85, 176
30
Answering Calls
21
AUTO ANS (Auto Answer)/MUTE Button
AUTO DIAL/STORE Button
21
39, 106
Automatic Call Hold
168
Automatic Call Waiting
Automatic Callback Busy
34, 203
35, 195
Automatic Callback Busy Cancel
29, 195
Automatic Line Access
B
Background Music (BGM)
36, 170, 195
18
Before Operating the Telephones
BGM —> Background Music
36, 170, 195
156, 202
BGM, External
170
Bluetooth Wireless Headset Registration
Bluetooth Wireless Headset Removal
170
76
Boss & Secretary feature
47, 203
Busy Station Signaling (BSS) —> Call Waiting
Busy Tone
205
21
Buttons on the PT
175
Buttons, Customizing
Buttons, Flexible
23
21
Buttons, Proprietary Telephone
D
C
Call Forwarding (FWD)
76, 198
22
Call Forwarding (FWD) Button
Call Forwarding (FWD) for your Incoming Call Distribution Group
Call Forwarding (FWD)/Do Not Disturb (DND)—Both calls Button
36, 195
Call Hold
38, 195
Call Hold Retrieve
Call Hold Retrieve, PDN/SDN Button
106
24, 176
Call Log Button
24, 176
Call Log for ICD Group Button
Call Log History for ICD Group
89
143
Call Log, Incoming
145
Call Log, Outgoing
Call Monitor
39, 203
39, 195
Call Park
24, 176
Call Park (Automatic Park Zone) Button
Call Park Button
24, 176
40
Call Park Retrieve
41, 196
Call Pickup
210
Operating Manual
78
23, 175
Data Line Security
61, 196
156
Dial Tone Transfer
Dial Tones
204
61, 196
Direct Inward System Access (DISA)
23, 175
Direct Station Selection (DSS) Button
Directories
148
61, 196
DISA —> Direct Inward System Access
19
Display
Display Backlight Selection
166
143
Display Features
165
Display Language Selection
Display Lock
170
166
Display Switching Mode
64, 197
DND —> Do Not Disturb
DND Override
203
64, 197
Do Not Disturb (DND)
22
Do Not Disturb (DND) Button
Do Not Disturb (DND) Tone
206
67, 197
Door Open
Index
Doorphone Call
68, 197
DSS —> Direct Station Selection
23, 175
E
EFA —> External Feature Access
69, 197
71, 170, 197
Electronic Station Lockout —> Extension Dial Lock
Enhanced DSS Key Mode
105
139, 201
Enhanced Walking Extension
23
ENTER Button
Exclusive Call Hold
36
69, 203
Executive Busy Override
71, 169, 197
Executive Busy Override Deny
Extension Dial Lock
71, 170, 197
72, 197
Extension Feature Clear
19
Extension Number, Confirming Your Own
Extension PIN (Personal Identification Number)
73, 170, 197
156, 202
External BGM
69, 197
External Feature Access (EFA)
External Feature Access (EFA) Button
24, 176
75, 197
External Relay
75
External Sensor
HOLD Button
22
Hold, Call
36, 195
87
HOSPITALITY FEATURES
87, 166, 198
Hot Line
24, 176
Hurry-up Button
Hurry-up Transfer —> Manual Queue Redirection
I
ICD Group —> Incoming Call Distribution Group
88
ICD GROUP FEATURES
88
20
Icon Description, Preparations
185
Icon Description, System Programming
Incoming Call Distribution Group (ICD Group) Button
23, 175
143
Incoming Call Log
90, 198
Incoming Call Queue Monitor
Indication Tones
206
21
INTERCOM Button
28
Intercom Call
J
Jog Dial
19, 22
F
K
Feature Highlights
2
195
Feature Number Table
Feature Numbers
18
22
FLASH/RECALL Button
23
Flexible Buttons
Forced Answerback Selection
168
76, 198
FWD —> Call Forwarding
169
FWD N/A Timer
FWD/DND Cycle Switch Mode
65, 79
65, 79
FWD/DND Setting Mode
79
FWD/DND settings, FWD/DND fixed button
FWD/DND status, switching with FWD/DND fixed button
23, 175
FWD/DND—Intercom calls Button
23, 175
FWD/DND—Outside calls Button
FWD—All Calls
76
76
FWD—Busy
76
FWD—Busy/No Answer
FWD—Follow Me
76
76
FWD—No Answer
Key Pad Tone Set
169
L
66, 79
L-CO —> Loop-CO
23, 175
LCS —> Live Call Screening
130
168
LCS Mode Set (After Answering)
130
Live Call Screening (LCS)
Live Call Screening (LCS) Button
24, 177
168
Live Call Screening Mode Set
170
Lock, Display
Lock, Extension Dial
71, 170, 197
159, 202
Lock, Remote Extension Dial
91, 198
Log-in/Log-out
Log-in/Log-out Button
24, 176
24, 176
Log-in/Log-out for all groups Button
93
Log-in/Log-out Monitor and Remote Control
Log-in/Log-out of a specified group Button
24, 176
23, 175
Loop-CO (L-CO) Button
G
M
G-CO —> Group-CO
23, 175
118, 119
Greeting Message (SVM), Recording
23, 176
Group FWD—Both calls Button
Group FWD—Intercom calls Button
24, 176
24, 176
Group FWD—Outside calls Button
199
Group Paging
Group-CO (G-CO) Button
23, 175
Making Calls
28
181
Manager Password
181, 182
Manager Programming
Manual Call Waiting
168
95
Manual Queue Redirection
125
Message Box, Accessing from Outside
Message Box, Accessing Other Extension's
126
121
Message Box, Redirecting to
21, 23, 175
Message Button
Message for Another Extension Button
23, 175
97, 199, 203
Message Waiting
32, 195
Message, Absent
Message, OGM
157, 202
117, 200
Message, SVM
23
MODE Button
H
Handset/Headset Selection —> Headset Operation
Hands-free Answerback
82
83
Hands-free Operation
24, 176
Headset Button
Headset Operation
84, 169
95
84, 169
Operating Manual
211
Index
MONITOR Button
Mute
99
21
N
Navigator Key
19, 22
159, 202
NDSS —> Network Direct Station Selection
NDSS Monitor Release
159, 202
159, 202
Network Direct Station Selection (NDSS)
25, 177
Network Direct Station Selection (NDSS) Button
NEXT PAGE Key
23
O
Off-hook Call Announcement (OHCA)
47, 100
Off-hook Monitor
100
157, 202
OGM —> Outgoing Messages
47, 100
OHCA —> Off-hook Call Announcement
One-touch Dialing
101
171
One-touch Dialing Assignment Mode Selection
23, 175
One-touch Dialing Button
One-touch Transfer
45
133
One-touch Two-way Transfer
24, 177
One-touch Two-way Transfer Button
Operator Call
29, 195
145
Outgoing Call Log
157, 202
Outgoing Messages (OGM)
P
Paging
102, 199
103, 169, 199
Paging Deny
Paging, and Transferring
103
102, 199
Paging, Group
103, 167, 199
Paralleled Telephone
Password, Manager
181
184
Password, System
21
PAUSE Button
PDN —> Primary Directory Number
104
104
PDN Extension
32, 169
Personal Absent Message
Personal Programming
164
115, 200
Personal Speed Dialing
23
PF —> Programmable Feature
Pickup Dialing —> Hot Line
87, 166, 198
73, 170
PIN —> Extension Personal Identification Number
129
PIN —> Verification Code Personal Identification Number
Portable Station (PS), Registration
18
30
Predialing
167
Preferred Line Assignment—Incoming
Preferred Line Assignment—Outgoing
167
25, 177
Primary Directory Number (PDN) Button
107, 199
Printing Message
Privacy Release
108
22
PROGRAM Button
23
Programmable Feature (PF) Button
Programming Feature Clear
173
181
Programming Information, Manager
164
Programming Information, Personal
Programming Information, System
184
182
Programming, Manager
164
Programming, Personal
212
Operating Manual
Programming, System
187
PS, Registration
18
10
Purchase Information
Q
Quick Dialing
112
R
REDIAL Button
21
112, 200
Redial, Last Number
Relay —> External Relay
75, 197
22, 24, 85, 176
Release Button
159, 202
Remote Extension Dial Lock
Remote Station Lock Control —> Remote Extension Dial Lock
127, 135, 201
Remote Wake-up Call
206
Reorder Tone
Ring Tones
204
206
Ringback Tones
112
Room Status Control
S
Safety Instructions
8
23, 175
S-CO —> Single-CO
S-CO Line Access
30
104
SDN —> Secondary Directory Number
105
SDN Direct Dial
SDN Extension
104
106
SDN Walking COS
25, 177
Secondary Directory Number (SDN) Button
SELECT Button
23
115
Self Labeling (KX-NT366 only)
166
Self Labeling Display Contrast
Sensor —> External Sensor
75
23
SHIFT Button
117, 200
Simplified Voice Message (SVM)
Single-CO (S-CO) Button
23, 175
5
SIP —> Session Initiation Protocol
5
SIP Extension, Characteristics
SIP Extension, Registration
18
21
Soft Buttons
115, 200
Speed Dialing, Personal
Speed Dialing, System
116, 200
21
SP-PHONE Button
105
Standard SDN Key Mode
Station Program Clear —> Extension Feature Clear
72, 197
115, 200
Station Speed Dialing —> Personal Speed Dialing
149
Storing New Names and Numbers
Supervisory Features—SUMMARY
96
117, 200
SVM —> Simplified Voice Message
122
SVM Log
System Alarm Button
24, 176
150
System Feature Access
184
System Password
System Programming
184, 187
116, 200
System Speed Dialing
T
TAFAS —> Trunk Answer From Any Station
126, 201
159, 202
Index
Telephone Types
18
Terminate Button
24, 176
111, 199
TIE Line Access
128
Time Service
24, 176
Time Service (Day/Night/Lunch/Break) Button
Time Service Mode Control
159, 202
Time Service Switching Mode (Automatic/Manual) Button
127, 136, 201
Timed Reminder
Toll Restriction (TRS) Button
24, 176
204
Tone Types
22
TRANSFER Button
Transfer, SDN Button
107
107
Transfer, To PDN Extension
44
Transferring Calls, To Other Extension
Transferring Calls, To Outside Party
45
192
Troubleshooting
126, 201
Trunk Answer From Any Station (TAFAS)
Two-way Record
133
24, 177
Two-way Record Button
133
Two-way Transfer
Two-way Transfer Button
24, 177
24, 177
U
Unattended Conference
60
V
Verification Code Entry
129, 201
Verification Code PIN (Personal Identification Number)
Virtual PS
80
22
VOICE CALL/MUTE Button
130
VOICE MAIL FEATURES
Voice Mail Integration
134, 201
134, 135
Voice Mail Transfer
25, 177
Voice Mail Transfer Button
Voice Messages (SVM), Leaving
121
122
Voice Messages (SVM), Listening to
19, 22
Volume Key
129
W
Wake-up Call, Remote
127, 201
137, 201
Walking COS
Walking Extension
138, 201
139
Walking Extension, Enhanced
138, 201
Walking Station —> Walking Extension
Warning Tone
206
47, 141
Whisper OHCA
142, 202
Wireless XDP Parallel Mode
Wrap-up
91
24, 176
Wrap-up Button
Operating Manual
213
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Puerto Rico, Inc.
San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985
http://www.panasonic.com/csd
Copyright:
This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal
use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic
Communications Co., Ltd.
© 2007 Panasonic Communications Co., Ltd. All Rights Reserved.
PSQX4183ZA KK0607TK0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement