HIGH DEFINITION IPTV SET-TOP-BOX

HIGH DEFINITION IPTV SET-TOP-BOX
PRODUCT INFORMATION
The set includes as follows:
Product:
Serial Number:
MAC:
IPTV Set-Top-Box
-1 pc.
External Power Supply Unit
-1 pc.
IR Remote Control
-1 pc.
АА batteries
-2 pc.
Instruction manual
-1 pc.
Package box
-1 pc.
3RCA to 3,5 mm jack cable
-1 pc.
LAN network cable
-1 pc.
HDMI to HDMI cable
-1 pc.
SPECIFICATIONS
WARRANTY SERVICE COUPON
Your warranty
By virtue of the present Coupon the absence of
defects in manufacturing of the product and its
compounds is warranted for a year-term counted
since date of purchase.
If during the mentioned warranty term the defects
of materials or operation of product will be found,
the product would be repaired or its defective parts
would be replaced free of charge in the service
center according to the follwing conditions.
Conditions
1. The present warranty is only valid if the
defective product is provided with properly
filled in Warranty Service Coupon. If date of
purchase is not pointed, the warranty term is
counted since date of the product manufacturing which is defined under serial number.
Service center reserves the right to refuse
free warranty service and parts replacement
INSTRUCTION MANUAL
Optionally the set may include as
follows:
Q.C. representative
Dear customer! Thank you for purchasing this
product and we hope you like it.
HIGH DEFINITION IPTV SET-TOP-BOX
in case the mentioned above documents are
not presented or the filled in it information is
not complete or unreadable.
2. The present warranty does not enable the
right for compensation and cover of loss
received as a result of rearrangement of the
product.
3. The present guarantee is invalid if model or
serial number of the product is altered,
erased, removed or unreadable.
4. The present warranty does not cover the
following:
4.1. any adaptations and alterations with the
aim of perfection and widening of the
common scope of the product application
specified in the Manual.
4.2. devices not specified in the coupon.
4.3. damage caused in result of:
а) improper maintenance including but not
limited by following:
(1) use of the product not according to its
intended purpose or Manual,
(2) mounting and maintenance of the product
in conditions not corresponding to safety
standards and regulations valid in the
country of use
(3) incorrect software installation (provides by
service operator)
b) repair performed by not authorized service
centers or dealers;
c) accidents, lightning stroke, flood, fire,
incorrect ventilation;
d) transporting excluding cases when it is
carried out by ASC.
e) faults of system in which the present
product had been using.
5. The present warranty does not encroach on
legitimate rights of the customer enabled to
him by the existing legislation and rights of
the customer related to the dealer which
may appear from the purchase-sale
agreement had been concluded by them.
Physical Parameters
Decoding of transport stream Power Supply Interface
Model MAG250 Micro
Weight:
190gr.
Dimensions (approximately):
87 mm depth,
127 mm width,
30 mm height
Operation temperature:
33°F - 104°F (1°C -40°C)
Humidity:
5% ~ 93% RH
(without condensate)
MPEG
Ethernet Interface
Ethernet Connector:
RJ-45 shielded
Cable:
UTP and STP 5 categories
Speed:
Auto-choice 10/100 Mbit/sec
Indicators:
Green - Connection,
Yellow - Activity
USB Interface
Type:
Quantity:
Analog Audio
Warranty Service Coupon (to be filled in by a shop-assistant)
Date of Purchase: ___________________________________________________________________
Company-Seller: ____________________________________________________________________
Address of Company-Seller: ___________________________________________________________
USB 2.0
2
Audio connectors: TRRS, (On adapter cable:
White=Left channel,
Red=Right channel)
Place of Stamp
of Company-Seller
Output:
Loading:
2 V RMS nominal
10 KW
I have no claims as to appearance and package contents. I accept the conditions of warranty service.
MPEG-2 ISO/IEC 13818
Specification of transport
stream
Connector:
Type:
DC cylindrical
2.5mm x 5.5mm
plug-and-socket,
current, center plus
5V ± 10%
Less than 7.5 W
in typical conditions
Input:
Video Decoder: MPEG-4p10/H.264
Power:
MPEG-4 p2 MPEG-2
VC-1 (optional)
Aspect:
4:3, 16:9
Video Cables
Video resolution: HD (1080i or 720p),
Composite Video Interface
NTSC (720x480i),
Type:
TRRS (Yellow connector on
PAL (720x576i)
adapter cable)
Graphics resolution:
Output:
1Vp-p
1920 x 1080,
Outer Power Supply Unit
1280 x 720 for HD,
Type:
Pulse with universal inlet
720x480 for NTSC and
Input:
110~240 V AC,
720x576 for PAL,
50~60 Hz,0.2 A max
ARGB 32-bit, Alpha blending
Output:
5 V DC, 3 A
Audio Decoder:
Dolby Digital (AC-3)-optional,
MPG-1 layers I & II,
Package
MPEG-1/2 layers III
Type:
cardboard box
(mp3) - optional,
Dimensions (approx.):
LC AAC, HE AAC,
57 mm height,
HE AAC v2 - optional,
220 mm width,
16-bit PCM
157 mm depth
Shipping Weight:
580 gr.
Signature of Customer: ______________________________
MANUFACTURER: “Telecommunication Technologies” Ltd, 1-A Tamozhennaya Square Odessa 65026 Ukraine
USAGE INSTRUCTION
Thanks you for
choosing our “IPTV
Set-Top-Box”
Follow the instructions of the present
Manual to immerse yourself in the world
of digital television.
Please read carefully the present manual
before using the product.
Please keep the present manual at hand
for referring to it in your further actions.
Your services provider should supply
you the separate manual containing the
information, how to access to the
services that are provided by service
provider of the digital television.
SERVICE CENTERS
Safe Using
Maintenance of Product
Service Centers List:
Warning, Attention
Please pay your attention to footnotes with symbols that warn
about the potential dangerous situations, such as
Service
The product should not be disassembled.
The tries of the disassembling of the product
may be dangerous for your life and for
serviceability of the product. The selfsupporting disassembling invalidates you the
product guarantee.
The maitenance should be effected by
qualified specialists in service centers only.
The product possesses protective sealings.
Breaking or changing of the mentioned
sealings invalidates guarantee of the
product.
Cleaning
The product and accessories should be rubbed with dry cloth or tissue only.
To ensure safety, before shell cleaning switch
the power supply off the alternative current
socket.
The shell may be cleaned from persistent
spots with a slightly wet cloth or cleaning
tissue.
Don’t use cleaner or polish, benzol, solvents,
abrasive items, liquid or aerosol detergent
means for the product and accessories
cleaning.
Northern & Southern America:
Infomir USA , Inc
15 Surfway S., Calverton, NY 11933
e-mail: sales@infomirusa.com
www.infomirusa.com
Warning!
Such symbol points to the dangerous actions
which may cause injure the user.
Attention!
Points the situations described in the present
instruction which may cause danger to the
arrangement or to other equipment.
Pictograms: Warning and Attention are included into present
User’s Manual to ensure your safety and the product proper maintenance. Please follow the very instructions.
Enclosures
Use the accessories supplied with your arrangement or recommended by the manufacturer only.
Using of the accessories which are not supplied or not sanctioned
by the manufacturer may be dangerous for the User or do harm
to the arrangement operation.
Using of the not appropriate accessories eliminates guarantees of
the product therewith.
Water and Moisture
To avoid damage which can cause ignition of the present product
or lesion to the User with electrical current, the product and its
accessories should not be undergone with any liquids, rain or
high moisture.
Don’t use the present product in the places where it may be
exposed to the contact with a liquid or vapour.
Russia:
“PROMZAKAZ” LTD
1 Block 18, 5th entrance, of. 9, Skladochnaya Str, Moscow 127018
www.promzakaz.com
e-mail: info@promzakaz.com
Other countries:
“Telecommunication Technologies” Ltd
1-A Tamozhennaya Sq. Odessa 65026 Ukraine
Additional Information:
Additional and extended information as to service centers you can see by reference:
http://iptv.infomir.com.ua/en/support/
General information as to the attachment you can receive by reference:
http://iptv.infomir.com.ua/
Updated software is accessible by the following references:
http://mag.infomir.com.ua/250/imageupdate
Description of the inner portal is accessible by reference:
http://mag.infomir.com.ua/User_Guide.pdf
COPYRIGHTS AND TRADEMARKS
License for Software
Software Use Agreement
IMPORTANT – read carefully: when using the
Software with your device, you agree thereby with
every clauses of the Software Use Agreement. If
you do not agree with the terms and conditions of
the Software Use Agreement, you should immediately stop using the device and return it to your
services provider completely.
License provision; limitations
According to this Agreement, Telecommunication
Technologies, Ltd and your services provider are
jointly to provide you with non-exclusive and nontransferrable license, without the right to sublicense, for use of all software and documents with
the product only. You recognize and acknowledge
that Telecommunication Technologies and your
services’ provider may regularly renew, change or
extend the product software abilities. You confirm
that:
a) You will not take attempts to change or extend
or decompile or disassembly or redesign, nor
otherwise get access to the software source code.
b) You will not take attempts to delete or upload
the product software. Any sale or transfer of the
product will be ruled hereby.
Ownership
The Manufacturer and the Manufacturer’s own
licensors keep all the rights constituting ownership, including patent, copyright, trademark, and
other intellectual property for the Software; and
any improvement and modification of the Software. You recognize and acknowledge that the
license according hereof does not grant you
ownership for the Software but only restricted
right of use it, according to provisions of this
Agreement.
Warranty for the Software
To the maximum extent, according to applicable
law, the Company does not make any submission
and declines any and all warranties, whether express or implied, as to the Software, including, with
no limitations, any implied demand warranties,
correspondence to target destination, abuse of
rights of third parties, neither those being result of
interrelations or result of commerce. The Company
does not guarantee the Software will be free of
defects or errors; that any defects or errors will be
corrected, or any function abilities of the Software
will meet all your requirements.
Disclaimer
To the maximum extent, according to applicable
law, the Company, its suppliers or licensors does
not bear responsibility for probable loss of profit,
suspension of activity, loss of information, or data,
or monetary funds, or for indirect, unforeseen,
special, punitive or other loss or damage, which
happen under this Agreement, use thereof or
inability to use the Software, even in the case the
Company or its suppliers or licensors have been
informed of the possibility of such losses or
damages.
Expiration
This Agreement and licenses provided hereafter
should be cancelled immediately, if you are unable
to meet the license restrictions, as specified herein.
The Company may cancel such agreement without
prior notice.
After expiration of validity hereof, you should
return all the Software, documents and accessories
to the services supplier.
Miscellaneous
This Agreement is governed by the Law of Ukraine,
regardless of its principles and conflicts. You agree
thereby all disputes arising out of this Agreement
will be subject to exclusive jurisdiction and be
considered in State Courts in Ukraine, and you
agree thereby for personal and exclusive jurisdiction and consideration of cases by those Courts.
If any of terms or conditions hereof proves to be
invalid by any applicable article or legal norms, it is
deemed invalid. Any breach or default in payment,
or any delay in implementation of any right will
not be reason for further breach or default in
payment. This Agreement is entire and exclusive
agreement by and between you and the Company
and prevails over any and all previous, whether
oral or written, agreements and arrangements.
This Agreement is subject to change in writing
only, by duly authorized representative of the
Company.
Notice of Copyright
©Telecommunication Technologies Ltd. All rights
reserved.
The information contained herein is the property
of Telecommunication Technologies Ltd. (the
Company). Not any part hereof can be copied,
reprinted, transferred, retyped, saved in search
engine, modified or translated into any other
language, including computer one, nor
sublicensed in any way, whether electronic,
mechanical, magnetic, optical, chemical, manual
or other one, without prior written consent by the
Company Manager responsible for the Product,
located at: 1a, Tamozhennaya Sq., Odessa 65026,
Ukraine.
Any illegal use of the materials contained herein,
by any person, will lead the person to the
responsibility for the Company’s damages.
Legal Clause
The Company will not bear any responsibility for
any errors/mistakes, contained herein, neither any
loss nor damage resulting from or related to this
or the information contained herein, even if the
Company has been notified of such loss or
damage probability.
This document is intended for acquaintance with
and training only. The Company reserves the right
for changing specifications and other information
contained herein, without prior notice.
Warranty
Warranty for your product is supplied via your
services’ provider. In the event your product
requires maintenance service, you should contact
the services’ supplier directly.
Trademarks
Инфомир, Infomir are the trademarks of Infomir
ltd.
Dolby and double-D symbol is the trademark of
Dolby Laboratories.
Made under authority of Dolby Laboratories.
HDMI is the trademark of HDMI Licensing, LLC
Secure Media is the trademark of Secure Media
Natick, MA.
Verimatrix is the trademark of Verimatrix, Inc.
Macrovision is a USA patent no. 4,631,603,
4,577,216 and 4,819,098 licensed for users under
the system paid – seen.
The product includes the copyright protection
technology, protected by American patents and
other intellectual property rights.
The use of the protection technology should be
authorized by the Macrovision Company and used
for domestic use or use in the system paid-seen,
unless otherwise allowed by the Macrovision
Company. Redesigning and disassembling is
illegal.
Approvals
FCC registration and requirements
The following paragraphs specify requirements
and information based on the Federal
Communication Committee Rules
Federal Communication Committee Rules,
Part 15
The device has been tested and proved
corresponding to the Class B digital hardware
parameters, according to Part 15 of the Federal
Communication Committee Rules. The Rules have
been developed to reduce the harmful affect to
living environment. The equipment generates,
uses and may emit radio-frequency energy, if is
not installed neither used in accordance with the
manual that causes radio interference. However, in
specific installation, no guarantee exists the radio
interference fail to appear. To correct the
interference, the following should be given a try:
• To increase distance between the equipment
and receiver.
• To connect the equipment in other way
• To take reference from dealer or skilled teleradio technician.
The device corresponds to Federal
Communication Committee Rules, Part 15, and is
governed by the following two conditions:
• The device should not cause harmful affect
• The device should accept any interference in,
including the one able to cause unwanted
operation.
Company name: Telecommunication Technologies
Ltd
1a, Tamozhennaya Sq., Odessa 65026, Ukraine
Safety
The Product:
MAG250 Micro IPTV Set-Top Box
Power supply:
DC 5 V, 1.5A, Class III
Standards:
IEC 60065:2001 CAN/CSA-C22.2 No. 60065-03 UL
6500
EEC 72/23/EEC и 89/336/EEC.
Directive WEEE (2002/96/EC)
The Product is in accordance with the Directive
WEEE.
ABOUT YOUR MAG250 MICRO
BACK PANEL MAG250 MICRO
About your MAG250 Micro
Connecting on the Back Panel
Thank you for purchasing of our product MAG250 Mcro, which makes it possible to possess access to TV and movies through your
digital television service.
You can control all functions of MAG250 Micro by using remote control for navigating on screen menu provided by your service
provider.
Getting Started
Please become acquainted in the next chapter how unpack and turn on power supply your MAG250 Micro.
In case of your product had been already adjusted for you by your provider look into “Use of Remote Control to control the device” for
information how to use the product.
Digital TV Connecting to the Network
MAG250 Micro receives TV channels and movies from the “digital TV” network.
Your services provider had been already installed the connection with the mentioned network.
• Connect cable for “digital TV” network into “digital TV”/Ethernet port on your product.
UNPACKING AND INSTALLATION THE PRODUCT
After the product extraction out of the
package it is necessary to handle it with care,
do not drop, shake it and afford other
influence.
The product is designed for horizontal
allocation onto flat surface.
Do not place the product onto slippery
surface, in place where it may be exposed to
vibration or hazard to drop and other
possible risks to the product to be damaged
which may cause invalidation the product
guarantee.
Do not dispose the product onto soft surface
like on the carpet, bed, etc., for such surfaces
cease access to the ventilation openings and
complicate air flow that may cause to the
product overheating and to invalidate
guarantee in result.
Do not locate the product into the furniture
in case of vacant clearance around the
product is not provided for the sufficient
product ventilation.
Do not place the product in place where it
may be exposed to influence of direct
sunlight, next to the sources of open fire and
convectors.
Do not dispose the product on surfaces
which in operating process may get warm, for
instance,
video record player or intensifier and do not
put anything on the top of the shell as well.
Do not cover the product with anything.
Containing liquids objects, such as vase, plant
pot are not to be placed next to or on the
product.
Do not touch or move the product during its
operation. Switch off the product if you need
to shift it.
The product is intended for use indoors.
The power supply cord is to be put to prevent
its deformation and jamming and touching it
CONNECTING TO MAG250 MICRO
with other objects as well. The power supply
cord is not to be laid under the carpets or
blocked with anything where any damage
may not be noticed.
Power supply unit
The product should be used with power
supply unit provided by the manufacturer
only.
The power supply unit is fitted out with plug
which is intended for connecting to socket in
your country usage. In case of the necessity in
the product connecting in other country or in
the region with other data of electric circuit
the power supply unit adopted for use in the
specified area should be received from the
manufacturer.
Operation
The outer power supply unit of the product is
getting warm in operation. In case of outer
power supply unit gets hot, switch off
promptly and get in touch with the
equipment supplier for its replacement.
Protection from atmospheric electricity or
not using for a long time.
On coming the thunderstorm and also in case
of the product is intended to be in no use for
a long time, disconnect the power supply
cord out of socket, switch off Ethernet, video
and audio cables.
It is to protect the product from thunder
discharges and power surges in the circuit..
Usage with Plasma Displays
In the product usage for watching with
plasma screens do not pause the picture
more than 5 minutes, otherwise it may cause
‘burn-out’ pixels on the screen. It is not
considered as a defect of the product but
peculiarity of plasma screens structure. The
producer does not bear the responsibility for
damages had been caused in such manner.
The Arrangement Designation
The product is designed to receive and record
TV pictures and sound signals. Any other use
is prohibited.
It means Telecommunication Technologies
insists on the product usage in entirely
accordant to the law of copyright. The
compliance with the specified laws leaves on
conscience of the user. The unauthorized
copying of the protected materials or
spreading of the specified copies under
definite conditions may violate the law of
copyright and is to be previously adopted by
possessor of the rights for the further
commercial use.
Updating Software
The product possesses the capability of
automatic software updating.
The manufacturer and your services provider
reserve the right for automatic software
updating to improve the product functional
capability.
During the software updating the product
should not be used for watching and
switched off until the complete software
updating.
During the software updating the product
switching off is inadmissible. The updating
takes several minutes and since then you are
able to continue enjoy on all delights of
digital television services.
The typical product connecting to TV and audio intensifier is shown on the presented diagram:
CONNECTING TO TV-SET WITH HDMI CONNECTOR - BEST QUALITY
HDMI
HDMI
HDMI
SD + HD
digital
CONNECTING TO TV-SET (AUDIO/VIDEO INPUT) - GOOD QUALITY
Connector:
Cable:
Video:
Audio:
VIDEO IN
AUDIO IN
CVBS, L, R
3x RCA - 3,5mm jack
only SD
analog
Composite video signal.
For video/audio connection
Warning! Switch off all arrangements (TV, intensifier, etc.) and take power supply out of socket before connecting and
any cables disconnecting.
In case of the intensifier does not connected leave digital audio outlets of your product not connected.
The product and accessories are packed into recycled package and plastic bags. Please keep all the packing materials for the further transportation.
MAG250 Micro is delivered with the following accessories:
Audio/Video cable
RCA - 3,5 mm TRRS
Connector:
Cable:
Video:
Audio:
Instruction manual
Video Connecting
Audio Connecting
The product allows connecting the following video cables:
• HDMI – provides the best quality of picture and allows
playing of digital video of high definition (HD).
• Composite (CVBS) - enables standard picture quality.
Use the connection with the best quality which could be
applied with your equipment.
• In case of your TV has HDMI inlet, use HDMI cable for the
product connecting to TV through HDMI outlets.
• In case of your TV is capable to operate with connection
through component video inlet, use component video
cable for the product connecting to TV through
component video outlets.
The product allows to conduct the following connections:
• Left and right channels for playing stereo sound through (L
and R outlets).
Attention! After the product unpacking please wait up
until the arrangement warms up to indoor
temperature to avoid condensation which may cause
short circuit.
Attention! In all cases follow coloration of
connectors and sockets on your equipment.
Outer power supply unit
Batteries for IR Remote
АA-size 2pcs.
IR remote control
In case of absence of any of the specified accessories please refer to your services provider.
USING REMOTE CONTROL TO CONTROL THE DEVICE
This section explains how to unpack Remote Control (RC) and prepare it for
work.
Your service provider can supply the product with an alternative RC. In that
case please refer to the manual supplied by your service provider.
Your supplier optionally can provide the product with an alternative RC.
Remote Control
Inserting batteries
On/Off
Remote Control requires two batteries type AA, R6, LR6, UM-3, 316, A316.
Inserting batteries into Remote Control.
“Picture in picture”
function
Favorites
Main menu
Insert two batteries type AA
(included in package) taking care
to observe the correct polarity
as shown on RC.
Replace the battery cover as
shown in the picture.
Average lifetime of a batteries
is about 1 year.
Caution! Do not attempt to recharge the batteries.
Immediately remove any leaking batteries. Take care when handling leaking
batteries as they may cause burns to the skin or eyes, or other physical injuries.
Service
TV programm guide
Change audio mode
Exit
Back to previous
Additional information
Virtual keyboard
Context menu
Quick access TV
Up
Important information about using batteries
Do not mix different types of battery or old and new batteries.
Do not use rechargeable batteries with the remote control.
Remove the batteries from the remote control if you are not going to use it for
several weeks, to avoid the risk of leakage.
Please respect your environment and any local regulations and dispose of old
batteries in a responsible manner.
Set / Change time
Record
Switch windows
Shift the battery cover located
on back side of RC as shown
in the picture.
Audio On/Off
OK/Enter
Additional
features
Right
Left
Down
Channel listing:
+FORWARD / -BACK
Rewind
Fast forward
Play / Pause
Stop
Page listing:
+ FORWARD / - BACK
Fast play
Volume:
+ MORE / - LESS
Change screen aspect
Delete symbol
TV channell selection buttons
or keyboard for text
Remote Control with
additional programmable
section.
For convenience this RCU has additional section
of programmable buttons. You can program
these buttons, for example, to control your TV.
RC has two LED lights to indicate of button
presses and operational modes. The green
indicator lights when any button pressed on the
base RC section. Red indicator is used to program
buttons from additional section.
Programming the RC:
To programm button from additional section
please do as follows:
1. Press "SET" button and hold it for about 2
seconds. When red indicator becomes
brighter the RC is ready to program.
2. Press the button you want to program. Red
indicator starts blinking.
3. Dispose emitters of two RC opposite each
other at a distance 10 mm and press the
button on the other RC to be used as a
source for programming and hold it for 2
seconds.
4. After three quick blinks red indicator will
stop blinking. Now you can program next
button.
5. Please program all buttons you needed as
described above.
6. Press "SET" button to save all programming
progress.
Programmable section
On / Off
Setting menu
Audio On / Off
Additional function
Change audio mode
Main menu
Virtual keyboard
Exit
Context menu
Back to previous
Quick access TV
Additional information
Page listing:
+ FORWARD / - BACK
Fast play
Up
Left
OK / Enter
Right
Down
Channel listing:
+FORWARD / -BACK
Change screen aspect
Volume:
+ MORE / - LESS
Rewind
Fast forward
Play / Pause
Stop
Delete symbol
TV channell selection buttons
or keyboard for text
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising