MCB 3652
↓
↑
36″
36" Monolith French Door
Bio
Fresh
Plus
Infinity
Light
Ice
Maker
Soft
System
SoftTelescopic
Smart
Device
561
Energy consumption (kWh/y)
Estimated Yearly Energy Cost in US $
Sound rating dB(A)
Total capacity cu.ft. (l)
Refrigerator capacity cu.ft. (l)
BioFresh-Plus compartment cu.ft. (l)
Freezer capacity cu.ft. (l)
Number of shelves
Number of door racks
Number of freezer drawers
Electronic control
Refrigerator temperature range °F (°C)
Freezer temperature range °F (°C)
Defrost type
Interior light
Internal Water Dispenser
Water filter
Features & Benefits
InfinitySwipe: Intuitive electronic touch-control panel features a full-color 3.5-inch touch &
swipe screen that allows you to control every function.
InfinityLight: Casts beautiful and even side lighting that can tuned according to personal
taste, including a soft brightening effect upon opening the doors.
InfinitySpring: Seamlessly integrated flush-mounted internal water dispenser that’s there
when you need it, and virtually invisible when you don’t.
PowerCooling: Allows cool moist air flow into the BioFresh chambers and cold air to circulate
behind the door, so items stored in the door remain as cold as everything else in the
refrigerator.
BioFresh-Plus: Featuring separate electronic controls, BioFresh-Plus offers precise
temperature regulation, and with our practical divider, you can easily separate the drawer into
two compartments with independent temperatures for everyday use.
Individually Opening French Doors: Get the most out of your French door refrigerator, with
two doors that open completely silent and independent of each other, providing more space
than a traditional one-door refrigerator.
Warranty terms
Full 2-Year Warranty, full 5-Year Warranty in the Sealed System and limited 12 Year Warranty.
67*
MCB 3652
40**
18.0 (510)
(239)
Energy consumption 8.4
(kWh
/ y) consumpti
Energy
3.1Cost
(87)in US $Yearly E
Estimated Yearly Energy
Estimated
Sound rating dB(A)
6.5 (184)
Sound rating dB(A
3
Total capacity cu.f
Total capacity cu.ft. (l)
4
2
BioFresh-Plus
com
BioFresh-Plus compartment cu.ft. (l)
InfinitySwipe
Freezer capacity c
Freezer capacity cu.ft. (l)
+36 °F to +45 °F (+2 °C to +7 °C)
Number of shelve
capac
Refrigerator capacity cu.ft.Refrigerator
(l)
of shelves
+7 °FNumber
to -17 °F
(-14 °C to -27 °C)
Number of door ra
Number of door racks
automatic
Number of freezer
Number of freezerInfinityLight
drawers
Electronic control
Electronic control
InfinitySpring
Refrigerator temp
Refrigerator temperature range
(°C)
yes °Ftemperatu
Freezer
IceMaker
Ice cube output lbs. (kg) / 24h
Freezer
temperature
rangeDefrost
°F (°C) type
fixed
water connection
Ice cube stock lbs. (kg)
Door hinges
Interior light
Product dimensions
in inch (H / W / D)
in cm (H / W / D)
Cut out dimensions
in inch (H / W / D)
in cm (H / W / D)
Net weight lbs. (kg)
Voltage V / Hz
Available
Accessories
Available
Accessories
9903 022 Stainless steel panel set
· Stainless steel panel set
9901
461 Monolith
brushed
aluminumsquare
square handle
handle
· Monolith
brushed
aluminum
9901
489 Monolith
stainless
steelround
roundhandle
handle
· Monolith
stainless
steel
· Monolith
brushed
aluminum
handle
9901
492 Monolith
brushed
aluminumsoft-edge
soft-edge handle
· Stainless steel Toe Kick
9902 349 Stainless steel Toe Kick
Defrost type
6.6Internal
(3) Water Dis
leftDispenser
fix / rightWater
fix filter
Internal Water
IceMaker
Water filter
IceMaker
83 3/4" / 35 11/16" / Ice
24"cube stock lbs
212.6 / 90.6 /Door
61 hinges
Ice cube stock lbs. (kg)
Door hinges
Product dimensio
in inch (H / W / D
Product dimensions
cm (H / W / D)
84" / 36" / in
25"
Cut
213.4 / 91.4 / 63.5out dimension
in cm (H / W / D) 418.9 (190)
in inch (H / W / D
in cm (H / W / D)
Cut out dimensions 115/60
in inch (H / W / D)
in inch (H / W / D)
Net weight lbs. (kg
in cm (H / W / D)
Voltage V / Hz
Net weight lbs. (kg)
Voltage V / Hz
See pages 56–59 for available accessories for single
units and Side-by-Side combinations.
* Estimated energy cost will depend on utility rates and use.
Estimated energy cost based on a national average electricity cost of 12 cents per KWh.
** Noise output – according to EN 60704-3.
54
3.5 (1.6)
Interior light
* Noise output – acco
↓
↑
36″
Product Dimensions
Product Dimensions
IMPORTANT!
Stated minimum height dimensions
include when the leveled feet are fully
inserted.
Height can be increased by a maximum of
3/4" (19 mm) by turning the adjustable feet.
When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top
has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick height.
Width will increase by 1/4" (6.5 mm) when
mounting strips are installed.
3
3/4
/4""
83
83
(2126
(2126 mm)
mm)
3 "
3
3 3/4
/4"
(96
(96 mm)
mm)
9 "
2
2 9/16
/16"
(65
(65 mm)
mm)
Cut out
Dimensions
Cut
out Dimensions
Continuous
Continuous
Toe Kick Toe Kick
matic
Light
D
3"
(76 mm)
2 13/16" - 4 3/16"
(72 - 106 mm)
2 13/16" - 4 3/16"
(72 - 106 mm)
ht fix
D D
3" 3"
(76 mm)
(76 mm)
D D
3" 3"
(76 mm)
(76 mm)
84" 84"
(2134(2134
mm) mm)
yes
B
A
84"
(2134 mm)
B
A
E
B
EC
C
A
4" 4"
(102 mm)
(102 mm)
B
A
E
Door Panel Dimensions
and dimensions of free length for power
Door Panel
Dimensions
11
1
11
1
1
H1 H1
2
HS HS
2
2
ft (2400 mm)
~ 8.8 ft (2400
~ 8.8 mm)
2
H2 H2
Dimension A = without
mounted door handle
A A
A
Cabinet
depth
framelessinstallation
installation style
25"
(635
mm)mm)
Cabinet
depth
frameless
style= =
25"
(635
Cabinet depth frameless installation style = 25" (635 mm)
Cabinet
depth
inset
installationstyle
style== 25"
25" (635
Cabinet
depth
inset
installation
(635mm)
mm)++
Cabinet depth inset installation style = 25" (635 mm) +
panel
thickness
panel
thickness
panel thickness
C
B
B
At this point the power cord exits from the appliance
this
point
the
power
cord
exits
from
the
appliance
AtAt
this
point
the
power
cord
exits
the(127
appliance
rear.
3/4"
(19
mm) from
the
leftfrom
and 5"
mm) from
rear.
3/4"
(19
mm)
from
the
left
and
5"
(127
mm)
the floor.
Freefrom
length
ofleft
the and
power
98"
(2.5from
m).
rear. 3/4"
(19 mm)
the
5"cord
(127ismm)
from
the
floor.
Free
length
power
cord
is 98"
the
floor.
Free
length
of of
thethe
power
cord
is 98"
(2.5(2.5
m).m).
C
C C The appliance has a recess in this area for cable and
waterline
laying.
(25 mm)ininthis
andfor
1/2"
(140and
The
appliance
has
a1"recess
area
cable
The
appliance
has
a recess
in thisdepth
area
for 5cable
and mm)
in height
over the
whole
width
of theand
appliance.
waterline
laying.
1" (25
mm)
in depth
5 1/2"
waterline
laying.
1" (25
mm)
in depth
and 5 1/2"
(140 (140
mm) mm)
in
height
over
the
whole
width
of
the
appliance.
in height over the whole width of the appliance.
D
This surface is visible when the appliance door is open.
Designed finish is required.
DD
This
surface
visible
when
appliance
door
is open.
This
surface
is is
visible
when
thethe
appliance
door
is open.
Designed
finish
is
required.
Designed
finish
is
required.
E
The anti-tipping bracket is positioned at the base of
E E the appliance and must be secured to the wall or to the
The
anti-tipping
bracket
is
positioned
at
base
of
floor,
pleasebracket
refer
to is
the
installation
for
more
The
anti-tipping
positioned
atmanual
thethe
base
of
information.
the
appliance
and
must
secured
wall
or the
to the
the
appliance
and
must
bebe
secured
to to
thethe
wall
or to
floor,
please
refer
installation
manual
more
floor,
please
refer
to to
thethe
installation
manual
forfor
more
information.
information.
Frameless installation style
H1 = 49 1/2" (1258 mm)
Add overlapping
dimension
to
installation style
36"Inset
recess
Frameless
installation
style
installation
style
36"
Frameless
installation
style
36" recess
recess
the
on (1258
the top.
H1 = 49 3/8" (1255 mm)Frameless
H1
= panel
49
1/2"
mm)
1/2"
(1258
mm)
H2
=overlapping
30
1/4" (768
mm)
H2installation
= 30 1/4" (768style
mm) H1
H1 =
= 49
49
1/2"
(1258
mm)dimension
Inset
Add
to
Add
overlapping
dimension
to
Inset
style
HS
=
1/4"
(6
mm)
HS
=
1/4"
(6
mm)
Add
overlapping
dimension
Inset installation
installation
style
H1 = 49 3/8" (1255 mm)
the panel on the top. to
W1 on
= 17the
7/8"
(454 mm)
17 3/4"
(451 mm) the
top.
H1
mm)
panel
top.
H1 =
= 49
49
3/8"
(1255
mm)
H23/8"
=W1
30=(1255
1/4"
(768
mm) the panel
H2 =on
30the
1/4"
(768 mm)
Add
overlapping
dimension to
W2 (768
= 35 3/4"
(908 mm)H2
=
30
1/4"
(768
mm)
H2
1/4"
mm)
H2
=
30
1/4"
(768
mm)
H2 =
= 30
30
1/4"
(768
mm)
HS = 1/4" (6 mm)
HS
=
1/4"
(6
mm)
the(6
panel
on the outer sides.
HS
=
1/4"
mm)
HS
=
1/4"
(6
mm)
mm)
HS = 1/4"
W1 =(617mm)
3/4" (451 mm) HS = 1/4"
W1
=(6
7/8"
W2
=17
36"
(914(454
mm) mm)
7/8"
W1
3/4"
(451
mm)
W1 =
= 17
17
7/8" (454
(454 mm)
mm) dimension to
W1 =
= 17
17
3/4"
(451
mm)
W2
= 35
3/4"
(908 mm) W1
Add
Addoverlapping
overlapping dimension
to
Add
dimension
to
W2
Add overlapping
overlapping
dimension
to
W2 =
= 35
35 3/4"
3/4" (908
(908 mm)
mm)
the
the outer
thepanel
panel on
on both
sides.sides.
and dimensions of free length for power
W 1 W 1 W 1 W11
HS HS
EC
Frameless
A = 8 1/4" (210 mm)
B = 1/2" (12.5 mm)
C = 20 1/16" (510 mm)
D = 15 3/4" (400 mm)
B
36"
(914 mm)
D
3"
(76 mm)
pring
ction
Individual
Individual
Toe Kick Toe Kick
36" 36"
(914 (914
mm) mm)
wipe
Inset
A = 8 1/4" (210mm)
B = 1/2" (12.5 mm)
C = 20 1/16" (510 mm)
35 11/16" (906 mm)
36" recess
C
the
on the
outer
sides.
the panel
panel
the(914
outer
sides.
W2 =on36"
mm)
Panel thickness: Min.W2
5/8"
Max. 1" (25.4 mm)
=
36"
(914
W2
= (16
36"mm)*
(914 /mm)
mm)
to
Panel and handle weight
1: Add
Max. overlapping
88 lbs.dimension
(40 kg)dimension
Add
to
Add overlapping
overlapping
dimension
to
the
panel
on
both
sides.
Panel and handle weight
2:
Max.
66
lbs.
(30
kg)
the panel on both sides.
the panel on both sides.
C
* If a shaker style panel is used, which is thinner than the minum panel thickness, shorter screws than those supplied in the accessory pack must be used.
ft (1550 mm)
~5 ft (1550
~5mm)
W2 W2
Panel
thickness:
Min.
5/8"
(16
/
1"
mm)
Panel
thickness:
(16 mm)*
/ Max.
1" (25.4
Panel
thickness:
Min. Min.
5/8"5/8"
(16 mm)*
mm)*
/ Max.
Max.
1" (25.4
(25.4
mm) mm)
Panel
and
handle
weight
1:
88
Panel
handle
weight
1: Max.
88(40
lbs.kg)
(40 kg)
Panel
and and
handle
weight
1: Max.
Max.
88 lbs.
lbs.
(40
kg)
Panel
and
handle
weight
2:
66
Panel
handle
weight
2: Max.
66(30
lbs.kg)
(30 kg)
Panel
and and
handle
weight
2: Max.
Max.
66 lbs.
lbs.
(30
kg)
* If a shaker style panel is used, which is thinner than the minum panel thickness, shorter screws than those supplied in the accessory pack must be used.
home.liebherr.com/monolith
55
Subject to modification. For up-to-date information, visit home.liebherr.com/monolith.
Specifications are for planning purposes only. For more detailed information refer to installation instructions or Design Guide.
24"
24"
(610
(610 mm)
mm)
11 "
35
35 11/16
/16"
(906
(906 mm)
mm)
">
