Vive MOB1033 Upright Walker Owner’s Manual

UPRIGHT WALKER
OVERVIEW
The Upright Walker allows for easier travel than traditional walkers. The 8 inch wheels
and dual armrests with brakes make for a smoother, safer ride.
WHAT'S INCLUDED
® 1 Base (F) 4x Female Star Locks
2x Arms combined with backrest ©) 2x Tri-Grip Screws
2x Front Wheels (H) 2x Curved Washers
2x Legs combined with hand brakes (Г) 1x Bag
4x Bolts (J) 1x Cane Holder
и — N
UPRIGHT WALKER ASSEMBLY
For video demonstration
tal a ! check out vhealth.link/y39
The Upright Walker requires assembly before use. Please follow the instructions below:
1. Identify the partially assembled base a N
piece, unfold it, and ensure the seat is flat
and locked into place.
a y
2. Attach the 2 front wheels to the seat
base by inserting and secure the bolt.
Insert from the inside all the way
through the holes and securing the
female star lock on the outside of the
leg of the base.
3. Insert the 2 back legs. Push the push
pin in and insert until the push pin
depresses, locking in the hole.
4. Insert the tri-grip screw from the outside
of the leg and screw in to better secure
the leg. Repeat for the other leg.
5, Locate the 2 handles and insert
them into the two front tubes of
the legs of the walker.
6. Push the push pin in and move
the arms down to the
desired height.
7. Insert the 2 hand grips into the
designated slot within the arms.
8. Choose the desired length by lining up the holes where you want the length to
be and secure with the bolt, curved washer and female star lock.
9. Insert the cane holder container into the pin head on the base on the walker.
4 a
10. Use the velcro straps to safely secure
the break lines out of the way.
11. Hang your bag from its straps on the
two tubes made for holding the bag.
FOLDING THE UPRIGHT WALKER
To fold the Upright Walker, simply pull up at the seat. To unfold the walker for use,
stretch the seat flat, and push down.
r
ADJUSTING THE HEIGHT OF THE HANDLES
There is a push button at each tube where the handle height can be adjusted up
or down by pressing the button and snapping into place when desired height
is reached.
OPERATING THE HAND BRAKES
Pull in on the hand brake to slow or stop the walker. To lock the walker in position,
push out on the hand brakes until they “click” and hold into the outward position
on their own.
4 à 4a
SPECIFICATIONS
Overall Width: 25”
Overall Length: 32”
Armrest Lowest Height: 41”
Armrest Highest Height: 46”
Seat Width: 17,5”
Seat Depth: 9,5”
Folded Width: 10.8”
Shopping Bag Weight Capacity: 11 LBS
Product Weight: 20 LBS
Max User Weight: 300 LBS
WARNING A
Do not use strong corrosive cleaners to clean the product's surface.
Product should not be left outside in rainy conditions.
Product may rust if regularly exposed to moisture.
Before sitting down on the seat, please lock both brakes to prevent the walker
from sliding.
Do not hang any heavy weighted items on either of the armrests as it will cause the
walker to be unstable.
Please fold the walker before storage.
This item is meant to be a walking aid. This means that it is not built to support the
full weight of ones body, it is only meant to assist you while walking. If a large
amount of force is placed on this item, even when brakes are in locked position,
this can cause the item to move out of its position.
Use caution when going over bumps.