Remote with 1X CR2025 battery
If lights don’t power on, flip the light strip plug around.
Connect the USB cable to the smart DC controller
3
Connect the 4 pronged plug to smart DC controller
BATTERY USE AND DISPOSAL
1. For best results use a CR2025 Lithium Battery.
2. Install only new batteries in your product.
3. Failure to insert batteries in the correct polarity, as indicated in the battery compartment., may shorten the life of the batteries or cause the battery to leak.
4. Do not dispose of batteries in fire.
5. The CR2025 button battery and the battery tube are considered hazardous waste and should be disposed of properly at your local hazardous waste
collection site for proper handling. Be sure the item holds no charge when disposing. Depending on your waste service provider you may be able to
recycle your battery. Please check with your waste service provider, as well as your local and state guidelines.
To satisfy FCC RF exposure requirements, a separation distance of 20cm or more should be maintained between the antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not recommended
