ARCADE1UP SFBB Street Fighter II Big Blue Owner’s Manual

Add to My manuals
1 Pages

ARCADE1UP SFBB is a gaming console that brings the classic arcade experience to your home. With its two joysticks and a variety of buttons, you can enjoy classic games like Street Fighter II, Mortal Kombat, and Pac-Man. The console also features a high-resolution display and built-in speakers for an immersive gaming experience.

advertisement

ARCADE1UP SFBB Street Fighter II Big Blue Owner’s Manual | Manualzz

TM

ROTATE ROTATE ROTATE ROTATE

ATTACK DESPERATION

ATTACK

JUMP ATTACK DESPERATION

ATTACK

JUMP

DUNK STARS

SHOT/JUMP

PASS/TACKLE

DASH SHOT/JUMP

PASS/TACKLE

DASH

6

* FIT FOR 3.5MM HEADPHONE JACK

AIM FIRE AIM AIM FIRE AIM

SMASH TENNIS

P7

ENGLISH

TM

POWER SHOT

LIGHT SHOT

LOB POWER SHOT

LIGHT SHOT

LOB

KICK STARS

TM

SHOT

PASS/TACKLE

JUMP/SLIDE SHOT

PASS/TACKLE

JUMP/SLIDE

P8

ENGLISH

TO ENJOY A SAFE GAMING ENVIRONMENT

Please use the wall anchor kit that is included with the product.

WARNING

Serious or fatal crushing injuries can occur from furniture tip-over.

To help prevent tip-over:

• Set up Arcade1UP on a level floor.

• Never allow children to climb or hang on product.

• Always set up an anti-tip device!

7

WARNING: Arcade1UP assumes no liability for improper installation or excessive loads placed on screws or bracket.

This wall anchor is not a substitute for proper adult supervision.

Make sure to locate your Arcade1UP on a flat surface

P9

ENGLISH

Colors, style and decoration may vary.

8

PROBLEM

Game will not turn on.

Game will turn ON, but there is no sound.

You hear sound but there is no picture.

The game screen is frozen.

Marquee / Light Up Deck Protector will not light up.

The game screen looks pixelated or there are lines running through the image.

One of the buttons on the control deck is stuck in the down position.

You are not able to scroll through the games on the game selection menu.

You are able to scroll through the games on the game selection menu, but you can’t enter a game to begin playing.

You have entered the game, but you can’t get the game to start.

You have entered the game, but you can’t exit the game to get back to game selection menu.

The control functions that are printed on the control deck do not match the gameplay on the screen for the game you are playing.

The game will not let me select 2 or 3 players for a chosen game.

POSSIBLE CAUSE

-Power cord is not plugged into wall outlet.

-Wires/Plugs are hooked up incorrectly.

-ON/OFF Switch is in the OFF position.

-Upload switch on back of monitor is in the OFF

position.

-Wires/Plugs were hooked up incorrectly.

-Volume Switch is in the OFF position.

-Wires/Plugs were hooked up incorrectly.

-The game encountered a problem when

processing the data.

-Marquee / Deck Protector power cord is not

plugged in at the back of the monitor.

-Marquee / Deck Protector power cord is plugged

into the wrong input.

-Wires/Plugs were hooked up incorrectly.

-Debris may have gotten between the button and

the button housing.

-You may be using the wrong joystick or pressing

the incorrect buttons to scroll through the games.

-You may be pressing the wrong button to enter

the game.

-You may be pressing the wrong button to start

the game.

-You may be pressing the wrong button to exit the

game.

-You may not be holding down the exit button

long enough.

-You may be pressing the wrong game control

buttons for the game you are playing.

-The game may only be a 1 or 2 player game.

SOLUTION

-Make sure power cord is plugged into the wall outlet and

there is power to that outlet. (Plug other electrical equipment

into the power outlet to make sure the outlet normally works.)

-Make sure all Wires/Plugs are properly connected and all the

way set in as directed in assembly instructions.

-Slide ON/OFF Switch located on control deck to the ON position.

-Slide upload switch on back of monitor to the ON position.

-Make sure all Wires/Plugs are properly connected and all the

way set in as directed in assembly instructions.

-Slide Volume Switch located on control deck to the right.

NOTE: Push volume slide switch right to increase volume, left to

lower volume.

-Make sure all Wires/Plugs are properly connected and all the

way set in as directed in assembly instructions.

-Turn the ON/OFF switch OFF and then back ON again.

-You may need to RESET the game. Turn the ON/OFF switch to

the OFF position. Unplug the game from the wall outlet and

wait 60 seconds to RESET the game. Plug the game back in and

turn the ON/OFF switch back to ON.

-Make sure all Wires/Plugs are properly connected and all the

way set in as directed in assembly instructions.

-Make sure all Wires/Plugs are properly connected and all the way

set in as directed in assembly instructions.

-You may need to RESET the game. Turn the ON/OFF switch to the

OFF position. Unplug the game from the wall outlet and wait

60 seconds to RESET the game. Plug the game back in and turn the

ON/OFF switch back to ON.

-Take something thin (like a business card) and place it between

the button and the button housing and slide it back and forth to

loosen the debris.

-Look at the game control section in the instruction manual to

make sure you are using the correct joystick or pressing the

correct buttons to scroll through the game selection menu.

-Look at the game control section in the instruction manual to

make sure you are pressing the correct button to enter the

game.

-Look at the game control section in the instruction manual to

make sure you are pressing the correct button to start the

game.

-Look at the game control section in the instruction manual to

make sure you are pressing the correct button to exit the game.

-Make sure you are holding the exit button down for 5 seconds

to exit the game.

-Look at the game control section in the instruction manual to

make sure you are pressing the correct game control buttons for

that game.

-Look at the game control loading screen on the monitor to

make sure you are pressing the correct control buttons.

(NOTE: The game controls that are printed on the control deck

are only for the feature cabinet game. The other games in the

cabinet will utilize the same buttons but react differently.)

-Refer to the game control section in the instruction manual to

see how many players are able to play that game.

ATARI LEGACY

LIGHT UP MARQUEE + RISER

MIDWAY LEGACY

LIGHT UP MARQUEE + RISER

CAPCOM LEGACY

LIGHT UP MARQUEE + RISER visit Arcade1up.com

TO SIGN UP FOR OUR MAILING LIST AND

SEE A COMPLETE LIST OF GAMES

Tempest ® © 1981 Atari Interactive, Inc.

©2021 Atari and the Atari logo are registered trademarks owned by Atari Interactive, Inc. All rights reserved. Used under license.

STREET FIGHTER™ll: THE WORLD WARRIORS ©CAPCOM U.S.A., INC. 1991 ALL RIGHTS RESERVED.

©CAPCOM. LICENSED FOR USE BY TASTEMAKERS LLC

MORTAL KOMBAT KLASSIC and all related characters and elements © & TM Warner Bros. Entertainment Inc.

WB GAMES LOGO, NETHERREALM LOGO: © & TM WBEI.(s20)

PAC-MAN™ & ©BANDAI NAMCO Entertainment Inc.

VISIT US AT

ARCADE1UP.COM

© CAPCOM. LICENSED FOR USE BY TASTEMAKERS, LLC.

BANDAI NAMCO Entertainment LEGACY

LIGHT UP MARQUEE + RISER

P1

READ BEFORE USING THE Arcade1UP

SAFETY PRECAUTIONS

The following symbols are used in labels on the game to draw attention to potentially hazardous situations:

WARNING : Failure to avoid the risk may result in death or serious injury

Electrical Shock Hazard. Disconnect power before removing cover.

Should only be done by a qualified technician.

P2

ENGLISH

1. Please read and comprehend all warnings stated in this manual.

2. Do not get arcade wet when cleaning.

3. Parents and guardians: Please read entire manual before allowing gamer to play.

4. The AC/DC adapter and apparatus shall not be exposed to dripping or splashing and that no object filled with liquids, such as vases, shall be placed on apparatus.

The AC/DC adapter is used as disconnect device.

The AC/DC adapter of apparatus should not be obstructed OR should be easily accessed during intended used. To be completely disconnect the power input, the AC/DC adapter of apparatus shall be disconnected from the mains.

5. If appliance is provided with protective earth terminal, it should be connected to main outlet with a protective earth connection.

6. Minimum distances 10 cm / 3.94 inches around the apparatus for sufficient ventilation.

7. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.

8. No naked flame sources such as lighted candles should be placed on the apparatus.

9. The apparatus should only be used in moderate climates.

WARNING THE EPILEPSY

A very small percentage of individuals may experience epileptic seizures or blackouts when exposed to certain light patterns or flashing lights.

Exposure to certain patterns or backgrounds on a television screen or when playing video games may trigger epileptic seizures or blackouts in these individuals. To reduce the risk of such a seizure incident, it is recommended to take a 10-15 minute break at each hour of playing.

1

FCC STATEMENT

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

WARNING: Arcade1UP assumes no liability for improper installation or excessive loads placed on screws or bracket.

This wall anchor is not a substitute for proper adult supervision.

P3

ENGLISH

10.

11.

12.

13.

14.

15.

16.

6.

7.

4.

5.

8.

1.

2.

3.

9.

Read these Instructions.

Keep these Instructions.

Heed all Warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with a dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Use only with a riser specified by the manufacturer, or sold with the apparatus. When a riser is used, use caution when moving the riser/apparatus combination to avoid injury from tip-over.

The equipment shall be used at working ambient temperature 32° - 95°F (0° - 35°C).

TIP OVER HAZARD - This apparatus should secure in place by using the provided mounting means. Free standing is capable of resulting in instability causing possible injury. Refer to the installation instruction for detail.

This game is designed for indoor and personal use only. It must not be installed outdoors.

The following conditions must be avoided.

1.

2.

Direct exposure to sunlight, high humidity, direct water contact, dust, high heat, or extreme cold.

Vibration. The game must be installed on a level surface.

Do not install in an area such that the game would present an obstacle in case of an emergency

(i.e., near fire equipment or emergency exits).

This product is intended for use only with the adapter provided:

Manufacturer: Blue Iron Holdings Ltd.

Model: BI36-120300-U2

POWER SUPPLY: AC/DC Adapter

INPUT POWER:

__

OUTPUT POWER: DC12V --- 3A

MONITOR: 17” LCD

CABINET ASSEMBLED DIMENSIONS (WITHOUT RISER): 55.2” x 19” x 22.75” (140.20cm x 48.26cm x 57.78cm)

• The AC/DC adapter is used as disconnect device.

• The AC/DC adapter of apparatus should not be obstructed OR should be easily accessed during intended use.

• To completely disconnect the power input, the AC/DC adapter of apparatus shall be disconnected from the mains.

Before contacting us for assistance or service, please check the "Troubleshooting" section in the User Manual.

If you still have questions regarding your Arcade1Up product or require technical support

Contact Arcade1Up Customer Service at www.Arcade1Up.com and click on "Support".

2 3

P4

ENGLISH

1.

2.

MOVE JOYSTICK TO SCROLL THROUGH GAME LIST

PRESS PLAYER 2 TO ENTER SETTINGS

3.

4.

MOVE JOYSTICK TO ADJUST SETTINGS

SELECT “SAVE & EXIT” THEN PRESS A BUTTON

5.

SELECT “RESET TO DEFAULTS” THEN PRESS A BUTTON TO RETURN THE GAME TO ITS ORIGINAL STATE

STREET FIGHTER™ II CHAMPIONSHIP EDITION STREET FIGHTER™ II’ HYPER FIGHTING

Difficulty

Demo Sound

Normal

ON

Difficulty

Demo Sound

Normal

ON

Save & Exit Reset To Defaults

SUPER STREET FIGHTER™ II TURBO

Difficulty

Demo Sound

Speed

2

OFF

NORMAL

Save & Exit Reset To Defaults

DARKSTALKERS™: THE NIGHT WARRIORS

Difficulty

Demo Sound

Speed

Normal

OFF

FASTEST

Save & Exit Reset To Defaults

Save & Exit Reset To Defaults

NIGHT WARRIORS™

Difficulty

Demo Sound

Speed

Normal

ON

NORMAL

Save & Exit Reset To Defaults

VAMPIRE SAVIOR: THE LORD OF VAMPIRE

Difficulty

Demo Sound

Speed

Easy

ON

NORMAL

Save & Exit Reset To Defaults

4

Difficulty

Demo Sound

ECO FIGHTERS™

5

OFF

Save & Exit Reset To Defaults

MUSCLE BOMBER DUO

Difficulty

Demo Sound

Normal

ON

Save & Exit Reset To Defaults

SATURDAY NIGHT SLAM MASTERS™

Difficulty

Demo Sound

Normal

ON

Save & Exit Reset To Defaults Save & Exit Reset To Defaults

ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY. ACTUAL PRODUCT MAY VARY DUE TO PRODUCT ENHANCEMENT.

CAUTION

Servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

P10

®

MADE IN CHINA

REV 07.21.21

AGES 14+

WARNING

To ensure safe operation of the product, be sure to read this Owners Manual before use.

Keep this Owners Manual in a safe place for easy reference when needed.

OWNERS MANUAL

5

ATTACK JUMP PIN ATTACK JUMP PIN GRAB ATTACK JUMP GRAB ATTACK JUMP

P1

P5

ENGLISH

SUPER PUZZLE FIGHTER II: TURBO™

Difficulty

Demo Sound

Speed

Medium

ON

NORMAL

* FIT FOR 3.5MM HEADPHONE JACK

Save & Exit Reset To Defaults

CAPCOM SPORTS CLUB™

Difficulty Kick

Timer Kick

Difficulty Smash

Max Smash Stars

2 - Easy

Normal

2 - Easy

2

Save & Exit Reset To Defaults

KNIGHTS OF THE ROUND™

Difficulty 1

Difficulty 2

Demo Sound

Normal

2

ON

TM

A / JAB PUNCH

SHORT KICK

B / STRONG PUNCH

FORWARD

KICK

ROUNDHOUSE

KICK

JAB

PUNCH

FIERCE PUNCH

SHORT

KICK

STRONG

PUNCH

FORWARD

KICK

ROUNDHOUSE

KICK

TM

TM

P6

ENGLISH

1.

*ARCADE MAY TAKE 10-15 SECONDS TO POWER ON AFTER SWITCHING ON

MOVE THE LEFT JOYSTICK TO SCROLL THROUGH GAME LIST

3.

4.

5.

2.

PRESS THE A BUTTON TO CHOOSE GAME

FOLLOW GAME CONTROLS BELOW FOR EACH GAME

HOLD PLAYER 1 (5 SECONDS) TO RETURN TO MENU

HOLD PLAYER 2 (5 SECONDS) TO RESET GAME

TM

TM

advertisement

Related manuals

Download PDF

advertisement