User manual

User manual
Contents
1.1
1.2
1.3
1.4
1.5
1.6
1.7
General safety instructions
Manufacturer liability
Appliance purpose
Disposal
Identification plate
This user manual
How to read the user manual
2 Description
2.1
2.2
2.3
2.4
General Description
Control panel
Other parts
Available accessories
3 Use
3.1 Instructions
3.2 First use
3.3 Using the accessories
3.4 Using the auxiliary oven
3.5 Using the main oven with display
3.6 Cooking advice
3.7 Special functions
3.8 Preset programs
3.9 Personal recipes
3.10 Settings
4 Cleaning and maintenance
4.1 Instructions
4.2 Cleaning the surfaces
4.3 Ordinary daily cleaning
4.4 Food stains or residues
4.5 Removing the door
4.6 Cleaning the door glazing
4.7 Removing the internal glass panels
4.8 Cleaning the inside of the oven
4.9 Pyrolytic (main oven only)
4.10 Extraordinary maintenance
5 Installation
5.1 Electrical connection
5.2 Cable replacement
5.3 Positioning
4
EN
IT
1 Instructions
4
5
5
5
6
6
6
7
7
7
8
9
10
10
10
11
11
12
16
20
28
36
40
44
44
44
44
44
44
45
45
46
47
49
51
51
52
52
We advise you to read this manual carefully, which contains all the instructions for
maintaining the appliance's aesthetic and functional qualities.
For further information on the product: www.smeg.com
3
Instructions
1 Instructions
1.1 General safety instructions
Risk of personal injury
• During use the appliance and its
accessible parts become very hot.
• Never touch the heating elements
during use.
• Keep children under eight years
of age at a safe distance if they
are not constantly supervised.
• Children must never play with the
appliance.
• Never rest metallic objects such
as knives, forks, spoons and lids
on the appliance during use.
• Switch the appliance off
immediately after use.
• Never try to put out a fire or
flames with water: turn off the
appliance and smother the flames
with a fire blanket or other
appropriate cover.
• The appliance must never be
cleaned by unsupervised children.
• Have qualified personnel carry
out installation and assistance
interventions according to the
standards in force.
• Do not modify this appliance.
• Do not insert pointed metal
objects (cutlery or utensils) into the
slots in the appliance.
4
• Do not try to repair the appliance
yourself or without the intervention
of a qualified technician.
• If the power supply cable is
damaged, contact technical
support immediately and they will
replace it.
Risk of damaging the appliance
• Do not use abrasive or corrosive
detergents on glass parts (e.g.
powder products, stain removers
and metallic sponges).
• Use wooden or plastic utensils.
• Do not seat on the appliance.
• Do not use steam jets to clean the
appliance.
• Do not obstruct ventilation
openings and heat dispersal slots.
• Never leave the appliance
unattended during cooking
operations where fats or oils
could be released.
• Never leave objects on the
cooking surface.
• Do not use the appliance to heat
rooms for any reason.
For this appliance
1.4 Disposal
• Ensure that the appliance is switched off
before replacing the bulb.
• Do not rest any weight or sit on the open
door of the appliance.
• Take care that no objects are stuck in the
doors.
This appliance must be disposed of
separately from other waste
(Directives 2002/95/EC, 2002/
96/EC, 2003/108/EC). The appliance
does not contain substances in quantities
sufficient to be considered hazardous to
health and the environment, in accordance
with current European directives.
To dispose of the appliance:
• Cut the power supply cable and remove
it along with the plug.
1.2 Manufacturer liability
The manufacturer declines all liability for
damage to persons or property caused by:
• use of the appliance other than the one
envisaged;
• non-observance of the user manual
provisions;
• tampering with any part of the
appliance;
• use of non-original spare parts.
1.3 Appliance purpose
• This appliance is intended for cooking
food in the home environment. Every
other use is considered improper.
• This appliance may be used by children
aged at least 8 and by people of
reduced physical and mental capacity,
or lacking in experience in the use of
electrical appliances, unless they are
supervised or instructed by adults who
are responsible for their safety.
• The appliance is not designed to
operate with external timers or with
remote-control systems.
Power voltage
Danger of electrocution
• Disconnect the main power supply.
• Unplug the power cable from the
socket.
• Deliver the appliance to the appropriate
recycling facility for electrical and
electronic equipment waste, or deliver it
back to the retailer when purchasing an
equivalent product, on a one for one
basis.
5
EN
IT
Instructions
Instructions
Our appliances are packed in nonpolluting and recyclable materials.
• Deliver the packing materials to the
appropriate recycling facility.
Plastic packaging
Danger of suffocation
• Do not leave the packaging or any part
of it unattended.
• Do not let children play with the
packaging plastic bags.
1.5 Identification plate
The identification plate bears the technical
data, serial number and brand name of the
appliance. Do not remove the identification
plate for any reason.
1.6 This user manual
This user manual is an integral part of the
appliance and must therefore be kept in its
entirety and in an accessible place for the
whole working life of the appliance.
Read this user manual carefully before using
the appliance.
1.7 How to read the user manual
This user manual uses the following reading
conventions:
Instructions
General information on this user
manual, on safety and final
disposal.
Description
Description of the appliance and its
accessories.
Use
Information on the use of the
appliance and its accessories,
cooking advice.
Cleaning and maintenance
Information for proper cleaning and
maintenance of the appliance.
Installation
Information for the authorised
persons: installation, operation and
inspection.
Safety instructions
Information
Advice
1. Use instruction sequence.
• Stand-alone use instruction.
6
Description
EN
IT
2 Description
2.1 General Description
1 Control panel
2 Main oven light
3 Main oven seal
4 Main oven door
5 Fan
6 Rack/tray support frames
Frame shelf
7 Auxiliary oven light
8 Auxiliary oven seal
9 Auxiliary oven door
2.2 Control panel
7
Description
1 Main oven temperature knob
2.3 Other parts
This knob allows you to select the cooking
time and temperature, set programmed
cooking and the current time as well as turn
the light inside the oven on and off.
Shelves
2 Main oven function knob
This knob allows you to turn the appliance
on and off and select the cooking function.
The appliance features shelves for
positioning trays and racks at different
heights. The insertion heights are indicated
from the bottom upwards (see 2.1 General
Description).
Cooling fan
3 Main oven display
Displays the current time, the selected
cooking temperature and function and any
time set.
4 Auxiliary oven temperature knob
This knob allows you to select the cooking
temperature.
Turn the knob clockwise to the required
value, between the minimum and maximum
settings.
5 Auxiliary oven thermostat indicator
light
The thermostat indicator light remains lit
when the oven is heating up. Once the oven
has reached the selected temperature the
indicator light switches off.
6 Auxiliary oven function knob
The oven's various functions are suitable for
different cooking modes. After selecting the
required function, set the cooking
temperature using the temperature knob.
The fan cools the oven and comes into
operation during cooking.
The fan causes a steady outflow of air from
above the door which may continue for a
brief period of time even after the appliance
has been turned off.
Interior lighting
The appliance interior lighting comes on:
• when the door is opened;
• when any function is selected, except for
and
;
• by turning the temperature knob right
when no function is selected (turn the
temperature knob right again to switch
off interior lighting).
8
Description
Oven tray
EN
IT
2.4 Available accessories
Some models are not provided
with all accessories.
Rack
Useful for collecting fat from foods placed
on the rack above and for cooking sweets,
biscuits, etc.
Deep tray
Useful for supporting containers with food
during cooking.
Tray rack
Useful for collecting fat from foods placed
on the rack above and for cooking sweets,
biscuits, etc.
The oven accessories intended to
come into contact with food are
made of materials that comply with
the provisions of current legislation.
Original supplied and optional
accessories can be requested to
Authorised Assistance Centres.
Use only original accessories
supplied by the manufacturer.
To be placed over the top of the oven tray;
for cooking foods which may drip.
9
Use
3 Use
3.1 Instructions
High temperature inside the oven
during use
Danger of burns
• Keep the oven door closed during
cooking.
• Protect your hands wearing heat
resistant gloves when moving food
inside the oven.
• Do not touch the heating elements inside
the oven.
• Do not pour water directly onto very hot
trays.
• Do not allow children to get near the
oven when it is in operation.
High temperature inside the oven
during use
Danger of fire or explosion
• Do not spray any spray products near
the oven.
• Do not use or leave flammable materials
near the oven.
• Do not use plastic kitchenware or
containers when cooking food.
• Do not put sealed tins or containers in
the oven.
• Do not leave the oven unattended
during cooking operations where fats or
oils could be released.
• Remove all trays and racks which are
not required during cooking.
10
Improper use
Risk of damage to enamelled
surfaces
• Do not cover the bottom of the oven
cavity with aluminium or tin foil sheets.
• If you wish to use greaseproof paper,
place it so that it will not interfere with the
hot air circulation inside the oven.
• Do not place pans or trays directly on
the bottom of the oven cavity.
• Do not pour water directly onto very hot
trays.
3.2 First use
1. Remove any protective film from the
outside or inside of the appliance,
including accessories.
2. Remove any labels (apart from the
technical data plate) from the
accessories and from the oven cavity.
3. Remove and wash all the appliance
accessories (see 4 Cleaning and
maintenance).
4. Heat the empty oven at the maximum
temperature to burn off any residues left
by the manufacturing process.
3.3 Using the accessories
Tray rack
Racks and trays
The tray rack has to be inserted into the tray.
In this way fat can be collected separately
from the food which is being cooked.
Racks and trays have to be inserted into the
side guides until they come to a complete
stop.
• The mechanical safety locks that prevent
the rack from being taken out
accidentally have to face downwards
and towards the oven back.
3.4 Using the auxiliary oven
The two ovens can be used at the
same time, except for the Pyrolytic
function.
To switch the auxiliary oven on:
1. Select the cooking function using the
function knob.
2. Select the temperature using the
temperature knob.
Gently insert racks and trays into
the oven until they come to a stop.
Clean the trays before using them
for the first time to remove any
residues left by the manufacturing
process.
11
EN
IT
Use
Use
3.5 Using the main oven with display
The display only refers to the main
oven. It has no control of the
auxiliary oven.
Favourites
Press the return knob from the clock screen
to display the last preset programs or
personal recipes used.
First use
Deleting favourites
On the first use, or after a power failure,
will be flashing on the appliance's
display. In order to be able to start any
cooking program, the current time must be
set (if the oven is being turned on for the first
time, it is also recommended you set the
required language).
Press the control knob to enter the settings
menu, see “3.10 Settings”.
If you wish to delete the favourites:
1. Press the return knob from the clock
screen to display the last preset
programs or personal recipes used.
2. Hold the control knob down for a few
seconds.
The appliance language is set to
“English” by default.
When first connecting or after the
power has been cut for a time it
will be necessary to wait a few
seconds before you can interact
with the appliance.
12
3. Select YES if you wish to delete the
favourites.
Cooking functions
1. Turn the control knob to the right or left to
select cooking functions from the main
menu. Then press it to confirm.
It is not recommended to place the
dish in the oven during the
automatic pre-heat stage.
4. When the preheating stage is over a
buzzer will sound to indicate that the
food can be placed inside the oven.
2. Turn the control knob to select the
required function. Press the knob to
confirm the selection.
Interrupting a function
Press the return knob to interrupt a cooking
function. Select the required option and
confirm it using the return knob.
3. The appliance will begin automatic
preheating. The display will show the
chosen function, the pre-set temperature,
the current time and the progress bar of
the temperature reached (preheating).
Keep the control knob pressed in
for at least 5 seconds to
immediately interrupt cooking at
any time and return to the main
menu.
Turn the control knob to change
the preset temperature at any time.
Press to confirm or wait 5 seconds.
13
EN
IT
Use
Use
List of cooking functions
Certain functions are not available
on all models.
Eco
The combination of the fan and the
circular heating element, in ECO
mode, is particularly indicated for
cooking on a single shelf, with
reduced power consumption.
Convection
As the heat comes from above and
below at the same time, this system
is particularly suitable for certain
types of food. Traditional cooking,
also known as static cooking, is
suitable for cooking just one dish at
a time. Perfect for all types of roasts,
bread and cakes and in any case
particularly suitable for fatty meats
such as goose and duck.
Grill
The heat coming from the grill
element gives perfect grilling results
above all for thin and medium
thickness meat and in combination
with the rotisserie (where fitted)
gives the food an even browning at
the end of cooking. Perfect for
sausages, ribs and bacon. This
function enables large quantities of
food, particularly meat, to be grilled
evenly.
14
Bottom
The heat coming just from the
bottom allows you to complete the
cooking of foods that require a
higher bottom temperature, without
affecting their browning. Perfect for
cakes, pies, tarts and pizzas.
Fan assisted
The operation of the fan, combined
with traditional cooking, ensures
consistent cooking even with
complex recipes. Perfect for biscuits
and cakes, even when cooked
simultaneously on several levels.
(For multiple-level cooking, we
recommend using the 1st and 4th
shelves.)
Fan grill
The air produced by the fan softens
the strong heatwave generated by
the grill, grilling perfectly even very
thick foods. Perfect for large cuts of
meat (e.g. shin of pork).
Baker's function
The combination of the fan with just
the lower heating element allows
cooking to be completed more
rapidly. This system is
recommended for sterilising or for
finishing off the cooking of foods
which are already well-cooked on
the surface, but not inside, which
therefore need a little more heat.
Perfect for any type of food.
Supercook
The combination of fan-assisted
cooking and traditional cooking
allows different foods to be cooked
on several levels extremely quickly
and efficiently, without odours and
flavours mingling. Perfect for large
volumes that call for intense
cooking. (For multiple-level cooking,
we recommend using the 1st and 4th
shelves.)
Fan forced
The combination of the fan and the
circular heating element
(incorporated in the rear of the
oven) allows you to cook different
foods on several levels, as long as
they need the same temperatures
and type of cooking. Hot air
circulation ensures instant and even
distribution of heat. It will be
possible, for instance, to cook fish,
vegetables and biscuits
simultaneously (on different levels)
without mixing odours and flavours.
Fan forced + fan grill
The combination of fan-assisted
cooking and traditional cooking
allows you to cook different foods
on several levels extremely quickly
and efficiently, without odours and
flavours mingling. Perfect for large
volumes that call for intense
cooking.
Small grill
Using only the heat released from
the central element, this function
allows you to grill small portions of
meat and fish for making kebabs,
toasted sandwiches and any types
of grilled vegetable side dishes.
15
EN
IT
Use
Use
3.6 Cooking advice
General advice
• Use a fan-assisted function to achieve
consistent cooking at several levels.
• It is not possible to shorten cooking times
by increasing the temperature (the food
could be overcooked on the outside and
undercooked on the inside).
• To prevent excessive amounts of
condensation from forming on the
internal glass at the end of cooking, hot
food should not be left inside the oven for
too long after cooking.
Advice for cooking meat
• Cooking times vary according to the
thickness and quality of the food and to
consumer taste.
• Use a meat thermometer when roasting
meat, or simply press on the roast with a
spoon. If it is hard, it is ready; if not, it
needs another few minutes cooking.
Advice for cooking with the Grill and the
Fan grill
• Meat can be grilled even when it is put
into the cold oven or into the preheated
oven if you wish to change the effect of
the cooking.
• With the Fan grill function, we
recommend that you preheat the oven
before grilling.
• We recommend placing the food at the
centre of the rack.
Advice for cooking desserts and biscuits
• Use dark metal moulds: they help to
absorb the heat better.
• The temperature and the cooking time
depend on the quality and consistency
of the dough.
16
• To check whether the dessert is cooked
right through: at the end of the cooking
time, put a toothpick into the highest point
of the dessert. If the dough does not stick
to the toothpick, the dessert is cooked.
• If the dessert collapses when it comes
out of the oven, on the next occasion
reduce the set temperature by about
10°C, selecting a longer cooking time if
necessary.
Advice for defrosting and proving
• Place frozen foods without their
packaging in a lidless container on the
first shelf of the oven.
• Avoid overlapping the food.
• To defrost meat, use the rack placed on
the second level and a tray on the first
level. In this way, the liquid from the
defrosting food drains away from the
food.
• The most delicate parts can be covered
with aluminium foil.
• For successful proving, a container of
water should be placed in the bottom of
the oven.
To save energy
• Stop cooking a few minutes before the
time normally used. Cooking will
continue for the remaining minutes with
the heat which has accumulated inside
the oven.
• Reduce any opening of the door to a
minimum to avoid heat dispersal.
• Keep the inside of the appliance clean
at all times.
• (Where fitted) When it is not being used,
remove the pizza plate and put the
cover back in its slot.
Timer during function
Timed cooking
This function only activates the
buzzer, without stopping cooking.
1. Press the control knob during a cooking
function.
Timed cooking is the function
which allows a cooking operation
to be started and then ended after
a specific length of time set by the
user.
Activation of timed cooking
cancels any minute minder timer
which may have been set
previously.
2. Turn the control knob right or left to set
the duration (from 1 minute to 4 hours).
After a few seconds, the
symbol
stops flashing and the countdown starts.
3. Wait for the buzzer to indicate that the
time has finished. The
flashes.
symbol
1. After selecting a cooking function and
temperature, press the control knob
twice.
2. Turn the knob right or left to set the
minutes of cooking from 00:01 to 13:00.
Keep the knob turned to produce a
faster increase or decrease.
3. A few seconds after the required
duration is set, the
symbol stops
flashing and timed cooking starts.
Turn the knob right or left to select
another timer or press the control
knob to deactivate the buzzer.
17
EN
IT
Use
Use
4. At the end of the cooking time “function
ended” appears on the display and a
buzzer will sound that can be
deactivated by pressing the control
knob.
Modifying the data set during timed
cooking
During operation, it is possible to modify
timed cooking duration:
1. When the symbol
is steady and the
appliance is cooking, press the control
knob. The symbol
starts flashing.
2. Turn the control knob right or left to alter
the preset cooking duration.
Delayed cooking
Turn the control knob to add some
minutes of cooking time.
To extend the cooking time
manually, press the control knob
again. The appliance will resume
its normal operation with the
previously selected cooking
settings.
Delayed cooking is the function
which allows a cooking operation
to be stopped at an established
time depending on the time set by
the user, after which the oven will
switch off automatically.
1. After selecting a function and a cooking
temperature, press the control knob to set
the cooking time.
To turn off the appliance see
“ Interrupting a function”.
2. Press the control knob before the
symbol stops flashing to set the cooking
end time.
18
3. The
symbol flashes. Turn the knob
right or left to set the end of cooking time.
4. After a few seconds the
and
symbols stop flashing. The appliance
waits for the delayed start time.
5. Based on the values set, the appliance
will start a preheating stage of
approximately 10 minutes.
7. At the end of the cooking time “function
ended” appears on the display and a
buzzer will sound that can be
deactivated by pressing the control
knob.
To extend the cooking time
manually, press the control knob
again. The appliance will resume
its normal operation with the
previously selected cooking
settings.
For safety reasons, it is not possible
to set the cooking end time by itself
without setting the cooking
duration.
6. It will then proceed with the selected
function.
19
EN
IT
Use
Use
Modifying the data set during
programmed cooking
After modifying the cooking time,
the end of cooking time must be reset.
3.7 Special functions
The special functions menu contains some
functions like the timer with the oven off,
defrost and cleaning functions.
During operation, it is possible to modify
programmed cooking duration:
1. When the
and
symbols are lit
steadily and the appliance is waiting for
cooking to start, press the control knob.
The symbol
starts flashing.
2. Turn the control knob to alter the
previously set cooking time.
3. Press the control knob again. The
symbol switches off and
starts
flashing. The display shows the end of
cooking time.
4. Turn the control knob to delay the end of
cooking time.
5. After a few seconds the
and
symbols stop flashing and programmed
cooking restarts its operation with the
new settings.
If the cooking duration is modified,
the end of cooking time is deleted.
20
Certain functions are not available
on all models.
List of special functions
Timer
This function sounds a buzzer when
the minutes set have elapsed.
Defrost by time
This function allows you to defrost
food on the basis of a selectable
time.
Defrost by weight
This function defrosts foods on the
basis of the type and weight of the
frozen product.
Proving
The proving function, using the heat
coming from the top, makes it
possible to prove all types of
dough, guaranteeing perfect results
quickly.
Food warming
To heat food or keep it hot.
Sabbath mode
This mode allows food to be
cooked while respecting the
requirements of the Jewish Sabbath.
Vapour clean (on some models
only)
This function makes cleaning easier
using the steam produced by a little
quantity of water poured onto the
appropriate drawing placed on the
bottom.
ECO pyrolytic (on some models
only)
When this function is set, the oven
executes a pyrolytic cycle at
500°C for a pre-set time. For use in
the case of ovens which are not too
dirty.
Pyrolytic (on some models only)
Setting this function, the oven
reaches temperatures up to 500°C,
destroying all the grease which
forms on the internal walls.
The more complex special
functions are illustrated below. For
functions such as Vapour Clean,
Pyrolytic and Eco Pyrolytic, see “4
Cleaning and maintenance”.
21
EN
IT
Use
Use
Timer
1. Turn the control knob to the right or left to
select timer from the “special functions”
menu. Then press it to confirm.
2. Turn the control knob right or left to set
the duration (from 1 minute to 4 hours).
After a few seconds, the
symbol
stops flashing and the countdown starts.
3. If you leave the timer setting screen, the
symbol will be displayed at the top
left, indicating that a minute minder timer
is active.
You must return the counter to zero
to remove the special timer.
If a function is activated after
setting a timer time, this time will be
automatically used as a timer for
the function, except for some
special functions, automatic
programs and personal recipes.
This function only activates the
buzzer, without stopping cooking.
22
Defrost by weight
1. Place the food inside the appliance.
2. Turn the control knob to the right or left to
select defrost by weight from the
“special functions” menu. Then press it to
confirm.
5. Press the control knob to confirm the set
parameters.
6. Press the control knob again to start
defrosting, or select change to further
modify the set parameters.
3. Turn the control knob to select the type of
food to defrost.
4. Turn the control knob to select the weight
(in kilograms) of the food to defrost.
7. At the end of the cooking time “function
ended” appears on the display and a
buzzer will sound that can be
deactivated by pressing the control
knob.
23
EN
IT
Use
Use
Pre-set parameters:
Type
Weight (Kg)
Time (min)
Meat
0.1 to 1.1
01h 05m
Fish
0.1 to 0.7
00h 05m
Fruit
0.1 to 0.5
00h 35m
Bread
0.1 to 0.5
00h 10m
Defrost by time
1. Place the food inside the appliance.
2. Turn the control knob to the right or left to
select defrost by time from the “special
functions” menu. Then press it to confirm.
3. Turn the control knob to adjust the value
(from 1 minute to 13 hours).
24
4. Press the control knob to confirm the
parameters then press it again to start
defrosting.
5. While the function is in progress, it is
possible to further modify the defrosting
duration. Turn the control knob to the
right or left to make the required
changes.
6. Press the control knob to confirm the new
defrosting duration set. In any event, the
defrosting will automatically resume 5
seconds from the last modification.
7. At the end of the cooking time “function
ended” appears on the display and a
buzzer will sound that can be
deactivated by pressing the control
knob.
Use
For successful proving, a container
of water should be placed in the
bottom of the oven.
1. Position the dough to prove on the
second level.
2. Turn the control knob to the right or left to
select proving from the “special
functions” menu. Then press it to confirm.
5. It will then proceed with the selected
function.
EN
IT
Proving
6. While the function is in progress, it is
possible to set a timer for a maximum of
4 hours (see “Timer during function”), a
proving duration (see “Timed cooking”)
or a delayed proving (see “Delayed
cooking”). Press the control knob to
make the required changes.
3. Press the control knob to start the
function.
Unless otherwise set, the proving
will have a maximum duration of
13 hours.
4. The appliance begins preheating.
The light inside the oven will
remain off during the proving
function.
25
Use
7. At the end of the cooking time “function
ended” appears on the display and a
buzzer will sound that can be
deactivated by pressing the control
knob.
It is not possible to modify the
temperature of the proving
function.
2. Turn the control knob to the right or left to
select food warming from the “special
functions” menu. Then press it to confirm.
3. Press the control knob to activate the
function, or turn it to adjust the pre-set
temperature (from 40° to 80°).
Food warming
1. Position the tray on the first shelf and
place the plates to be warmed in its
centre.
4. The appliance begins preheating.
5. It will then proceed with the selected
function.
Do not stack plates too high. Stack
plates a maximum of 5/6 high.
26
6. While the function is in progress, it is
possible to set a timer for a maximum of
4 hours (see “Timer during function”), a
warming duration (see “Timed cooking”)
or a delayed warming (see “Delayed
cooking”). Press the control knob to
make the required changes.
7. At the end of the cooking time “function
ended” appears on the display and a
buzzer will sound that can be
deactivated by pressing the control
knob.
Sabbath mode
The appliance follows some
specific behaviour when operating
in this function:
• Cooking can proceed
indefinitely, it is not possible to
set any cooking duration.
• No preheating will be
performed.
• The cooking temperature which
can be selected varies between
60-100 °C.
• Oven light disabled, any
operation such as opening the
door or manual activation with
the knob will not activate the
light.
• Oven fan disabled.
• Knob lights and buzzers
disabled.
After activating the Sabbath mode
it will no longer be possible to
modify any parameters.
Any action on the knobs will
produce no effect; only the control
knob remains active to allow you
to return to the main menu.
27
EN
IT
Use
Use
1. Turn the control knob to the right or left to
select sabbath mode from the “special
functions” menu. Then press it to confirm.
3.8 Preset programs
This mode allows you to select a pre-set
food cooking program. The appliance will
automatically calculate the optimum
cooking parameters based on the weight
entered.
2. Turn the control knob to the right or left to
change the heating temperature.
Starting a program
1. Turn the control knob to the right or left to
select the required type of dish from the
“preset programs” menu. Then press it to
confirm.
3. Press the control knob to confirm the
parameters and start the Sabbath mode.
2. Select the sub-category of dish to cook
and press the control knob to confirm.
4. When finished, press and hold the
control knob for at least 5 seconds to
return to the main menu.
28
3. Select the type of cooking (where
possible, depending on the dish chosen)
and press the control knob to confirm.
4. Turn the control knob to select the dish
weight.
6. If you choose the Start option, cooking
will start with the preset program's
predefined settings and the display will
show all the parameters set.
The time shown does not include
the automatic reheat time.
Some predefined cooking
parameters can be changed at
any time, even after cooking has
started.
5. At this point it is possible to start the
selected preset program, permanently
modify the settings or perform delayed
cooking.
7. A message will indicate when to place
the food in the oven and enable the start
of cooking.
8. Press the control knob to start cooking.
29
EN
IT
Use
Use
Ending a preset program
Changing a preset program permanently
1. When the preset program has finished,
the appliance will warn the user with
buzzers and the flashing
symbol.
1. Inside the selected preset program, turn
the control knob to the left or right to
select change from the menu of the
selected dish. Then press it to confirm.
2. Press the control knob to perform
cooking with the same parameters
currently set (press the knob twice if the
buzzer is active). The appliance will
automatically restart cooking if it is at the
correct temperature; otherwise it will also
resume preheating.
2. Turn the control knob to the right or left to
select the function to associate with the
preset program. Press the control knob to
confirm.
Cooking in sequence is useful to
cook multiple dishes of the same
type. For example, it can be used
to cook several pizzas in a row.
It is not recommended to place the
dish in the oven during the
automatic pre-heat stage. Wait for
the specific message.
3. Press the return knob to exit and end the
preset program.
30
3. Turn the control knob to the right or left to
select the weight to associate with the
preset program. Press the control knob to
confirm.
4. Turn the control knob to the right or left to
select the duration to associate with the
preset program. Press the control knob to
confirm.
5. Turn the control knob to the right or left to
select the temperature to associate with
the preset program. Press the control
knob to confirm.
7. Pressing the control knob again will
return to point 2 of the change sequence.
You must press the return knob to save
the preset program. The appliance will
ask to confirm the changes which have
just been made.
If the changes are not confirmed,
the program will remain
unchanged.
8. If the changes are confirmed the display
will show confirmation of this.
6. Turn the control knob to the right or left to
select the shelf to associate with the
preset program. Press the control knob to
confirm.
31
EN
IT
Use
Use
Preset program table
MEATS
Subcategory
Roast beef
Pork loin
Lamb
Veal
Pork spare ribs
Pork chops
Pork sausages
Bacon
Turkey
Chicken
Rabbit
Cooking
rare
medium
well done
medium
well done
roasted
roasted
roasted
Weight
(Kg)
1
1
1
1
1
1
1
1
1
1
0.5
3
1
1.5
Function
Level
Temp. (°C)
Fan forced
Fan forced
Fan forced
Supercook
Supercook
Supercook
Fan assisted
Fan grill
Fan grill
Fan grill
Fan grill
Fan assisted
Supercook
Fan forced
2
2
200
200
200
2
2
2
2
2
4
4
4
4
1
2
2
190
190
190
190
250
280
280
250
190
200
190
Function
Level
Temp. (°C)
Fan assisted
Fan forced
Fan forced
Fan forced
Fan forced
Fan forced
2
2
2
2
2
2
160
160
160
160
180
160
Function
Level
Temp. (°C)
Grill
Fan forced
Supercook
Fan assisted
4
2
2
2
250
200
220
220
Time
(minutes)
35
40
45
75
100
110
65
16
15
12
7
110
64
80
FISH
Subcategory
Fresh fish
Frozen fish
Firm fish
Delicate fish
Snapper
Snapper
Cooking
-
Weight
(Kg)
0.5
0.5
1
0.8
1
1
Time
(minutes)
35
45
45
60
30
35
VEGETABLES
Subcategory
Mixed vegetables
Potatoes
32
Cooking
grilled
roasted
roasted
Frozen fried
Weight
(Kg)
0.5
1
1
0.5
Time
(minutes)
25
45
40
13
DESSERTS/PASTRIES
Subcategory
Ring cake
Biscuits
Muffins
Profiteroles
Meringues
Sponge cake
Strudel
Tarts
Brioche bread
Croissants
Cooking
-
Weight
(Kg)
1
0.6
0.5
0.5
0.3
1
1
0.8
1
0.6
Time
(minutes)
60
18
18
70
90
60
40
40
40
30
Function
Level
Temp. (°C)
Fan assisted
Supercook
Fan forced
Supercook
Supercook
Fan forced
Convection
Convection
Fan assisted
Fan forced
2
2
2
2
2
2
2
2
2
2
160
160
160
180
120
160
170
170
180
160
Weight
(Kg)
Function
Level
Temp. (°C)
Time
(minutes)
1
1
Fan forced
Supercook
2
2
200
180
30
25
Function
Level
Temp. (°C)
Fan assisted
Fan assisted
Fan assisted
1
1
1
280
280
230
Function
Level
Temp. (°C)
Convection
Convection
Fan assisted
Convection
Fan forced
1
1
2
220
230
190
200
180
BREAD
Subcategory
Leavened bread
Focaccia
Cooking
-
PIZZA
Subcategory
Pan baked pizza
Stone baked pizza
Cooking
fresh
frozen
Weight
(Kg)
1
0.5
0.3
Time
(minutes)
7
4
6
PASTA/RICE
Subcategory
Pasta bake
Lasagne
Paella
Quiche
Soufflé
Cooking
-
Weight
(Kg)
2
2
0.5
0.5
0.5
1
2
Time
(minutes)
40
35
25
30
25
33
EN
IT
Use
Use
SLOW COOKING
Subcategory
Veal
Beef
Pork
Lamb
Cooking
rare
well done
-
Weight
(Kg)
1
1
1
1
1
The cooking times in the table refer
to the food indicated in the recipe
and are a guide only; they may
vary depending on personal taste.
The tables give the factory-set
data. To reset a predefined
program with the original settings
after it has been changed
permanently, just enter the data
given in the table above.
If ECO logic mode (see 3.9
Personal recipes) has been
activated, cooking times or
preheating times may vary.
34
Function
Level
Temp. (°C)
Supercook
Convection
Convection
Supercook
Supercook
2
2
2
2
2
90
90
90
90
90
Time
(minutes)
360
105
380
330
360
Use
Food
Lasagne
Pasta bake
Roast veal
Pork loin
Pork shoulder
Roast rabbit
Turkey breast
Roast chicken
EN
IT
Auxiliary oven cooking information table
Temperature
Static
Static
Runner
position from
the bottom
1 or 2
1 or 2
220 - 230
220 - 230
50 - 60
40
Static
Static
Static
Static
Static
Static
2
2
2
2
2
2
180 - 190
180 - 190
180 - 190
180 - 190
180 - 190
190 - 200
70 - 80
70 - 80
90 - 100
70 - 80
89 - 90
55 - 60
Weight (Kg)
Function
3/4
2
1
1
1
1
1.5
1
(°C)
Time (minutes)
1nd surface 2nd surface
Pork chops
Pork fillet
Sausages
Bacon
1
1
1
0.8
Grill
Grill
Grill
Grill
4
3
3
1/2/3/4
250 - 280
250 - 280
250 - 270
270
Salmon trout
1
Static
1
250 - 270
14 - 16
1
0.8
Static
Static
1
2
280
180 - 190
8
15 - 20
1
0.5
Static
Static
Static
Static
1
1
1
2
170 - 180
170 - 180
170 - 180
180
35 - 40
20 - 25
50 - 60
60
Pizza
Focaccia
Fruit tart
Short pastry
Rice pudding
Apple pie
7-9
9 - 11
7-9
6-7
5-7
5-9
5-6
3-4
The times indicated in the table do not include preheating times and are provided as a guide only.
35
Use
3.9 Personal recipes
This menu allows you to enter a personal
recipe with the parameters you wish to use.
On first use, the appliance will only offer to
let you add a new recipe. After storing your
personalised recipes, these will then be
available in the relative menu.
Up to 10 personal recipes can be
stored.
Adding a recipe
3. Turn the control knob to the right or left to
select the weight to associate with the
recipe. Press the control knob to confirm.
The weight can be set or modified
up to 5 kg, but the user is
responsible for ensuring that the
dish will fit correctly inside the
oven.
4. Turn the control knob to the right or left to
select the duration to associate with the
recipe. Press the control knob to confirm.
1. Select add from the personal recipes
menu.
2. Turn the control knob to the right or left to
select the function to associate with the
recipe. Press the control knob to confirm.
36
5. Turn the control knob to the right or left to
select the temperature to associate with
the recipe. Press the control knob to
confirm.
6. Turn the control knob to the right or left to
select the shelf to associate with the
recipe. Press the control knob to confirm.
7. Pressing the control knob again will
return to point 2 of the change sequence.
You must press the return knob to save
the recipe. The appliance will ask you to
enter a name for the recipe you have just
created.
9. After entering the name of your recipe,
press the return knob to confirm or cancel
the information you have entered. Select
YES if you wish to store the recipe.
If you select “NO”, you will lose all
changes made.
10. If the changes are confirmed the
display will show confirmation of this.
8. Enter the name of the recipe. Turn the
control knob to select the characters to
enter. Each time the control knob is
pressed, a character of the name will be
entered. The
previous letter.
character deletes the
The recipe name can contain
maximum 10 characters, including
spaces.
In order to be able to save the
recipe, the name must contain at
least one character.
37
EN
IT
Use
Use
1. Turn the control knob to the right or left to
select a previously stored personal
recipe from the “personal recipes” menu
(in the example, the recipe test has been
stored). Press the control knob to confirm.
Changing a personal recipe
1. Turn the control knob to the right or left to
select a previously stored personal
recipe from the “personal recipes” menu
(in the example, the recipe test has been
stored). Press the control knob to confirm.
2. Turn the control knob to the right or left to
select start. Press the control knob to
confirm.
2. Turn the control knob to the right or left to
select change. Press the control knob to
confirm.
3. Cooking will start with the parameters
previously set for the recipe.
3. Repeat the same steps, starting at point 2
of the chapter “Adding a recipe”.
Starting a personal recipe
Deleting a personal recipe
1. Turn the control knob to the right or left to
select a previously stored personal
recipe from the “personal recipes” menu
(in the example, the recipe test has been
stored). Press the control knob to confirm.
During cooking it is always
possible to modify the temperature
and cooking time, but this will not
be saved to the recipe for future
use.
38
2. Turn the control knob to the right or left to
select delete. Press the control knob to
confirm.
Delayed cooking
1. Turn the control knob to the right or left to
select a previously stored personal
recipe from the “personal recipes” menu
(in the example, the recipe test has been
stored). Press the control knob to confirm.
3. Confirm the deletion. Select YES to
delete the recipe permanently.
2. Turn the control knob to the right or left to
select function delayed. Press the
control knob to confirm.
4. If you confirm the deletion, the display
will show a confirmation message.
3. Turn the control knob to the right or left to
select the cooking end time with the
control knob. The
symbol flashes.
39
EN
IT
Use
Use
4. Press the control knob to confirm.
5. After a few seconds the
symbol
stops flashing. The appliance waits for
the delayed start time.
3.10 Settings
The product configuration can be set using
this menu.
Language
Sets the interface language from those
available.
1. Turn the control knob to the right or left to
select language from the “settings”
menu. Press the control knob to confirm.
40
2. Turn the control knob to the right or left to
select the required language. Press the
control knob to confirm.
3. Confirm the selected language.
Clock
Sets the time displayed.
1. Turn the control knob right or left to set the
hour.
2. Press the control knob to move to
changing the minutes.
3. Turn the control knob right or left to set the
minutes.
4. Press the return knob to confirm.
Use
To confirm activation of the control lock,
select YES.
During normal operation it is indicated by
the
indicator light coming on.
To release the lock temporarily during
cooking, hold the return knob down for 3
seconds. One minute after the last setting
the lock will become active again.
Demo mode (for exhibitors only)
This mode allows the appliance to
deactivate all heating elements, while
keeping the control panel active.
EN
IT
Control lock
Allows the appliance to lock the controls
automatically after one minute of normal
operation without any intervention from the
user.
To confirm activation of the demo mode,
select YES.
If the mode is active, “demo
mode” will be shown on the
display.
To use the appliance normally, set
this mode to OFF.
Touching or varying the position of
the control and return knobs, the
display will show a warning for
two seconds.
41
Use
Eco-Logic
This mode allows the appliance to limit the
power used. Indicated for use of multiple
home appliances at the same time.
If this option is enabled, the
appear on the display.
To disable sounds when the knobs are
pressed, select NO.
symbol will
To confirm activation of the eco-logic
mode, select YES.
Keep warm
This mode allows the appliance
to keep cooked food warm (at low
temperatures)
after cooking
finishes with a cooking cycle for which
a duration has been set (if this is not
manually interrupted),
without altering the taste and aromas
obtained during cooking.
Activating eco-logic mode means
that preheating and cooking times
may be extended.
Sound
Whenever one of the knobs is pressed, the
appliance beeps. This setting disables these
sounds.
42
To confirm activation of the keep warm
mode, select YES.
Use
Digital clock
Displays the time in digital format.
EN
IT
Eco-Light
For greater energy savings, the light is
automatically deactivated one minute after
the start of cooking.
To confirm activation of the digital clock,
select YES.
To confirm activation of the eco-light mode,
select YES.
To stop the appliance from
automatically deactivating the light
after one minute, set this mode to
OFF.
When no appliance function is active, the
display will show the current time in digital
format.
The manual off/on control is
always available with both settings
by turning the return knob to the
right.
43
Cleaning and maintenance
4 Cleaning and maintenance
4.1 Instructions
Improper use
Risk of damage to surfaces
• Do not use steam jets to clean the
appliance.
• Do not use cleaning products containing
chlorine, ammonia or bleach on steel
parts or parts with metallic finishes on the
surface (e.g. anodizing, nickel- or
chromium-plating).
• Do not use abrasive or corrosive
detergents on glass parts (e.g. powder
products, stain removers and metallic
sponges).
• Do not use rough or abrasive materials
or sharp metal scrapers.
4.4 Food stains or residues
Do not use metallic sponges or sharp
scrapers as they will damage the surfaces.
Use ordinary non-abrasive products with
the aid of wooden or plastic utensils if
necessary. Rinse thoroughly and dry with a
soft cloth or a microfibre cloth.
Do not allow residues of sugary foods (such
as jam) to set inside the oven. If left to set for
too long, they might damage the enamel
lining of the oven.
4.5 Removing the door
For easier cleaning, the door can be
removed and placed on a canvas.
To remove the door proceed as follows:
1. Open the door completely and insert two
pins into the holes on the hinges
indicated in the figure.
4.2 Cleaning the surfaces
To keep the surfaces in good condition,
they should be cleaned regularly after use.
Let them cool first.
4.3 Ordinary daily cleaning
Always use only specific products that do
not contain abrasives or chlorine-based
acids.
Pour the product onto a damp cloth and
wipe the surface, rinse thoroughly and dry
with a soft cloth or a microfibre cloth.
44
2. Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
Cleaning and maintenance
EN
IT
3. To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that grooved sections A are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.
3. Some models have an intermediate glass
panel. Remove the intermediate glass
panel by lifting it upwards.
4.6 Cleaning the door glazing
The glass in the door should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
We recommend the use of
cleaning products distributed by
the manufacturer.
4.7 Removing the internal glass
panels
For easier cleaning the door internal glass
panels can be disassembled.
1. Remove the internal glass panel by
pulling the rear part gently upwards,
following the movement indicated by the
arrows (1).
2. Then, pull the front part upwards (2). In
this way, the 4 pins attached to the glass
detach from their housings in the oven
door.
4. Clean the external glass panel and the
panels previously removed. Use
absorbent kitchen roll. In case of
stubborn dirt, wash with a damp sponge
and neutral detergent.
5. Refit the panels in the reverse order in
which they were removed.
45
Cleaning and maintenance
6. Reposition the internal glass panel. Take
care to centre and insert the 4 pins into
their housings in the oven door by
applying slight pressure.
4.8 Cleaning the inside of the oven
For the best oven upkeep, clean it regularly
after having allowed it to cool.
Take out all removable parts.
Clean the oven racks with warm water and
non-abrasive detergent. Carefully rinse and
dry damp parts.
The oven should be operated at
the maximum temperature for
about 15-20 minutes after the use
of specific products, to burn off the
residues left inside the oven.
For easier cleaning, remove the
door.
46
Removing racks/trays support frames
Removing the guide frames enables the
sides to be cleaned more easily. This
operation should be performed each time
the automatic cleaning cycle is used (on
some models only).
To remove the guide frames: Pull the frame
towards the inside of the oven to unhook it
from its groove A, then slide it out of the
seats B at the back.
When cleaning is complete, repeat the
above procedures to put the guide frames
back in.
4.9 Pyrolytic (main oven only)
Pyrolytic is an automatic hightemperature cleaning procedure
which causes dirt to dissolve.
Thanks to this process, it is possible
to clean the inside of the oven very
easily.
Pyrolytic function setting
1. Turn the control knob to the right or left to
select eco pyrolytic or pyrolytic from
the “special functions” menu. Then press
it to confirm.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Switch off the burners or electric hot
plates of the hob installed above the
oven.
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass panel following
the usual cleaning instructions.
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Completely remove all accessories from
inside the oven.
• Remove the racks/trays support frames.
• Remove the upper guard (if present).
• Close the door.
2. Turn the control knob to set the cleaning
cycle duration from a minimum of 2 hours
to a maximum of 3 hours (except for the
function whose duration is 2 hours).
47
EN
IT
Cleaning and maintenance
Cleaning and maintenance
3. Press the control knob. The
symbol
will now be lit solidly. The display shows
a warning to remove accessories from
inside the oven cavity.
4. Press the control knob to start the
pyrolytic cycle.
Recommended pyrolytic cycle
duration:
• Light dirt: 2 hours.
• Medium dirt: 2 ½ hours.
• Heavy dirt: 3 hours.
Pyrolytic
1. The display shows “cleaning in progress”
and the remaining time to indicate that
the appliance is carrying out the
automatic cleaning cycle. Two minutes
after the pyrolytic cycle has started the
door is locked (the door lock indicator
light
comes on) by a device that
prevents the door from being opened.
It is not possible to select any
function once the door lock device
has been activated.
2. At the end of the pyrolytic cycle, the door
remains locked as long as the
temperature inside the oven returns to
safety levels.
3. The display indicates that the cooling
procedure inside the oven cavity is in
progress. Wait for the oven to cool
down and collect the residues deposited
inside with a damp microfibre cloth.
During the first pyrolytic cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolytic cycle.
During the pyrolytic cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolytic cycle, the
fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.
If the pyrolytic cycle gives
unsatisfactory results at minimum
duration, it is recommended to set
a longer time for successive
cleaning cycles.
48
Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle
start time.
1. After selecting the pyrolytic cycle
duration, press the control knob. The
display shows the current time and the
symbol comes on.
2. Turn the control knob to set the time you
wish the pyrolytic cycle to finish.
3. After a few seconds, the
and
symbols remain lit steadily and the
appliance waits for the set start time to
start the cleaning cycle.
3. Remove the bulb cover using a tool (e.g.
a screwdriver).
4. Slide out and remove the lamp.
It is not possible to select any
function once the door lock device
has been activated. It remains
possible, however, to switch off the
appliance using the specific
controls.
4.10 Extraordinary maintenance
Live parts
Danger of electrocution
• Disconnect the oven power supply.
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the racks/trays support frames.
Do not touch the halogen lamp
directly with your fingers, but wrap
it in an insulating material.
5. Replace the lamp with one of the same
type (40W).
6. Refit the cover correctly, so that the
moulded part of the glass is facing the
door.
7. Press the cover completely down so that
it attaches perfectly to the bulb support.
49
EN
IT
Cleaning and maintenance
Cleaning and maintenance
Removing the door seal (auxiliary oven
only)
To permit thorough cleaning of the oven, the
door seal may be removed. There are
fasteners on all four sides to attach it to the
edge of the oven. Pull the 4 edges of the
seal outwards to detach the fasteners.
What to do if...
The display is completely off:
• Check the mains power supply.
• Check whether an omnipolar switch
upstream of the appliance supply line is
in the “ON” position.
The appliance does not heat up:
• Check whether it has been set in “demo”
mode (for further details see “Settings”).
The controls do not respond:
• Check whether it has been set to “control
lock” mode (for further details see
“Settings”).
The cooking times are longer than those
indicated in the table:
• Check whether it has been set to “ecologic” mode (for further details see
“Settings”).
50
After the automatic cleaning cycle
(pyrolytic) it is not possible to select a
function:
• Verify whether the door lock has
deactivated. If it has not, the oven has a
safety device that does not allow
functions to be selected while the door
lock is active. This is because the
temperature inside the oven is still too
high to permit any type of cooking.
The display shows “Error 4”:
• The door lock has not properly attached
to the door. This might be because the
door was accidentally opened during
the door lock activation. Switch the oven
off and on again, waiting a few minutes
before selecting a new cleaning cycle.
If the door is opened during a fan-assisted
function, the fan stops:
• This is not a fault. It is a normal operation
of the appliance, useful when cooking
foods in order to avoid excessive heat
escaping. When the door is closed, the
oven will return to normal operation.
If the problem has not been
resolved or in the case of other
types of fault, contact your local
technical support centre.
If other Error XX error messages
are indicated:
note down the error message,
function and set temperature and
contact your local technical
support centre.
Installation
5.1 Electrical connection
Connection modes:
EN
IT
5 Installation
• 220-240 V 1N~
Power voltage
Danger of electrocution
• Have the electrical connection
performed by authorised technical
personnel.
• The appliance must be connected to
earth in compliance with electrical
system safety standards.
• Disconnect the main power supply.
Use a 3 x 4 mm² three-core cable.
• 380-415 V 2N~
Use a 4 x 2.5 mm² four-core cable.
General information
Check the grid characteristics against the
data indicated on the plate.
The identification plate bearing the
technical data, serial number and brand
name is visibly positioned on the appliance.
Do not remove this plate for any reason.
The appliance works at 220-240 V~.
Perform the ground connection using a wire
that is 20 mm longer than the other wires.
• 380-415 V 3N~
Use a 5 x 2.5 mm² five-core cable.
Fixed connection
Fit the power line with an omnipolar circuit
breaker in compliance with installation
regulations.
The circuit breaker should be located near
the appliance and in an easily reachable
position.
Connection with plug and socket
Make sure that the plug and socket are of
the same type.
Avoid using adapters and shunts as these
could cause overheating and a risk of
burns.
51
Installation
5.2 Cable replacement
Power voltage
Danger of electrocution
• Disconnect the main power supply.
1. Unscrew the fastening screws 2 of the
terminal board cover.
5.3 Positioning
Heavy appliance
Danger of crush injuries
• Place the appliance into the piece of
furniture with the aid of a second person.
Pressure on the open door
Risk of damages to the appliance
• When positioning the appliance during
installation, do not use the door handle
to lift up or move this appliance.
• Never use the oven door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
oven door when open.
Heat production during appliance
operation
Risk of fire
2. Slide the tabs 1 of the terminal board
cover out of the grooves;
3. Loosen the screw of the cable retention
bracket in the right lower part of the oven
back 3;
4. Make sure that the cables (for the oven
or any hob) follow the best route in order
to avoid any contact with the appliance.
52
• Check that the piece of furniture material
is heat resistant.
• Check that the piece of furniture has the
required slots.
Fixing
Mounting (mm)
To secure the appliance to the counter,
screw in 6 screws through the holes in the
frame.
The oven is designed for mounting into any
piece of furniture as long as it is heatresistant. Respect the unit dimensions and
the oven overall dimensions for positioning.
Depending on the type of installation a slot
should be foreseen for ventilating the
appliance.
To be able to open the door
completely, any unit protuberance
should be at a distance of at least
1 cm from the oven.
Appliance overall dimensions (mm)
53
EN
IT
Installation
Installation
Create an opening with a total
surface area of at least 200 cm² in
the bottom front part of the unit.
54
Create an opening 35-40 mm
deep in the top rear part of the unit.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement