Idatalstart AKX-IDS(RS)-BZ1B ADS-BZ1 remote starter Install guide
Below you will find brief information for remote starter AKX-IDS(RS)-BZ1B ADS-BZ1. This guide details the installation process for the remote starter, which allows you to start your Mercedes-Benz vehicle from a distance. Included are instructions on connecting the module, programming it, and configuring various settings. The guide also provides troubleshooting tips and error codes for resolving any issues you may encounter.
Advertisement
Advertisement
instaLL guiDe
AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN
Document numbeR
14281
Revision Date
20140314
FiRmwaRe
AKX-IDS(RS)-BZ1B-[ADS-BZ1]
haRDwaRe
ADS-BZ1
accessoRies
ADS-USB (REQUIRED)
COMPATIBLE RF-KIT (OPTIONAL)
DIRECTED SMARTSTART & ADS-HRN(RS)-SM01 (OPTIONAL)
ADS-TOOLS-MB01 (OPTIONAL)
notice
The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.
Automotive Data Solutions Inc. © 2014
beFoRe instaLLation
1- Connect module to computer
2- Login to Weblink account
3- Flash firmware to module (module is not preloaded with firmware)
4- Use accessories accordingly (accessories are sold separately) www.idatastart.com
NOTES
I This fi rmware covers Automatic Transmission
(AT) vehicles only.
II All the covered Push To Start (PTS) vehicles are equipped with a keyless authorization system called "Keyless Go".
CL Class PTS AT
CL Class STD key AT
S Class PTS AT
S Class STD key AT
S Class Diesel PTS AT
S Class Diesel STD key AT
* If equipped with a factory hood switch.
VEHICLE LIST - 1 OF 1
FEATURES
Page 2 oF 22
DOC.: #14281
• 20140314
07-13 2 • • • • • • • • • • • • • • • •
07-13 1 • • • • • • • • • • • • • • • •
07-13 2 • • • • • • • • • • • • • • • •
• • •
• • •
• • •
07-13 1 • • • • • • • • • • • • • • • • • • •
07-13 2 • • • • • • • • • • • • • • • • • • • •
07-13 1 • • • • • • • • • • • • • • • • • • • •
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN www.idatastart.com
BOX CONTENTS - 1 OF 1
BOX CONTENTS
MODULE
PROGRAMMING
BUTTON
LED 1
BLACK
BLACK
BLACK
1
2
3
2
4
6
1
3
5
8
10
12
14
16
18
20
2
4
6 5
7
9
1
3
11
13
15
17
19
BLUE
2
4
6
1
3
5
USB
LED 2
1 2 3
BLACK
1 2 3 4
BLACK
RF PORT/WEBLINK PORT
2
4
6
8
10
5
7
9
1
3
3
4
1
2
1
2
3
4
1
2
3
4
1
2
2
4
6
8
10
12
1
3
5
7
9
11
RED
BLUE
BLACK
BLUE
TELEMATIC
PORT
WHITE
BLACK
EXPANSION PACK
XP LED 1 XP LED 2
BLACK
3
4
1
2
LED
T-HARNESS 1
EXPANSION PACK ASSEMBLY
LED
TOP VIEW BOTTOM VIEW
BLUE
1 3 5 7 9
2 4 6 8 10
WEBLINK CABLE (required accessory sold separately)
WEBLINK CABLE
MODULE
WEBLINK PORT
4 PIN BLACK CABLE
1 3 5 7
2 4 6 8
9
10
BLACK
COMPUTER
USB PORT
ELECTRONIC IGNITION SWITCH REMOVAL TOOL (accessory sold separately)
IGNITION
SWITCH
TOP VIEW
10 PIN WHITE CONNECTOR
12 PIN BLACK CONNECTOR
AFTERMARKET HOOD SWITCH AND CABLE
2 PIN BLACK CONNECTOR
EXTRA CONNECTOR HOUSING
STICKER 1 STICKER 2
ADS-TOOLS-MB01 OR
MERCEDEZ BENZ P/N 639 589 01 07 00
Page 3 oF 22
DOC.: #14281
• 20140314
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN www.idatastart.com
RF KIT (Visit our website to see if this accessory is included with your product)
RF KIT
MODULE
RF PORT
BLUE CABLE
(NC) RED
(NC) BLACK
BLUE
BLACK
RF DECODER
COMPATIBLE ACCESSORIES - 15 OF 15
BLACK CABLE ANTENNA
TELEMATIC KIT (accessories sold separately)
ADS-HRN(RS)-SM01
MODULE
TELEMATIC PORT
(NC)
(NC)
(NC)
DIRECTED SMARTSTART
FLASH RF DECODER
BEFORE INSTALLATION
Page 4 oF 22
DOC.: #14281
• 20140314
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN www.idatastart.com
imPoRtant technicaL note - 1 OF 1
instaLL viDeo gaLLeRY avaiLabLe onLine
Before installing this product, consult our Install Video Gallery and watch:
•
Vehicle Disassembly Procedure videos
•
Module Connection Procedures videos
•
Module Programming Procedures videos
Simply visit our forum and register at http://www.12voltdata.com/forum/viewtopic.php?f=340&t=9683&sid=a61772b486e4584ad6f058b171ffa425
Page 5 oF 22
DOC.: #14281
• 20140314
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN www.idatastart.com
inteRioR view
COMPONENT LOCATOR - 1 OF 1
Page 6 oF 22
DOC.: #14281
• 20140314
DRiveR siDe view
A
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN
PassengeR siDe view
www.idatastart.com
MODULE INSTALLATION PROCEDURE - 1 OF 1
01
02
OFF ACC
START the vehicle. Verify all vehicle functionalities. If the vehicle displays error messages or any malfunction: stop the installation and service the vehicle.
ENGINE
START
STOP
OFF ACC ON START
Turn OFF the vehicle.
03
04
05
06
START
STOP
Verify all keyfob functionalities (Door Lock,
Door Unlock, Trunk Release and RFID access if equipped).
Connect and secure every connector to the vehicle, as shown in STEP 1 of the WIRING
DIAGRAM.
07
08
OFF ACC START
WARNING: Any vehicle harness that is disconnected during installation, must be re-connected before performing any system tests. Failure to comply will result in vehicle displaying error messages. An OEM scantool will be required to clear the error messages.
START the vehicle. Verify all vehicle functionalities.
START
STOP
09
WARNING: If the vehicle displays error messages or any malfunction, stop the installation, verify every connection and if the problem persists, call technical support.
Insert the expansion pack in the module.
Connect the module to the computer with the programming cable (WEBLINK port). Flash the module with the latest fi rmware then fl ash the expansion pack.
10
OFF ACC ON START
Turn OFF the vehicle.
ENGINE
STOP
11
Connect every connector to the module, as shown in STEP 2 of the WIRING DIAGRAM.
12
Connect every other connector to the module, as shown in STEP 3 of the WIRING DIAGRAM.
13
14
15
16
17
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN
Page 7 oF 22
DOC.: #14281
• 20140314
If the vehicle is not equipped with a factory hood switch, install an aftermarket hood switch as shown in STEP 4 of the WIRING
DIAGRAM.
RF
If required, connect a compatible RF Kit to the
RF port of the module.
If required, connect a compatible Telematics
Device to the TELEMATIC port of the module.
Put sticker 1 on a clean and visible surface in the engine bay and put sticker 2 under the dashboard near the OBDII connector.
Module installation procedure completed.
www.idatastart.com
TYPE 1 - WIRING DIAGRAM - 1 OF 1
Page 8 oF 22
DOC.: #14281
• 20140314
WARNING
1-TO CONNECT THE MODULE: FOLLOW STEPS 1 TO 4
2-TO DISCONNECT THE MODULE: FOLLOW STEPS 4 TO 1
MODULE
STEP 2
BLACK 20 PIN
CONNECT TO MODULE
RELAY
STEP 3
BLUE 6 PIN
CONNECT TO MODULE
BLACK 10 PIN
STEP 4
CONNECT IF REQUIRED
WHITE 10 PIN
07 GRAY/WHITE - HOOD STATUS (-) INPUT
08 GRAY/BLACK (NOT USED)
BLACK 2 PIN (NOT USED)
IF NOT EQUIPPED
WITH AN OEM HOOD SWITCH,
INSTALL AN AFTERMARKET HOOD SWITCH
STEP 1
CONNECT TO VEHICLE
START VEHICLE WITH OEM KEYFOB TO TEST CONNECTIONS
BLACK 6 PIN
BLACK 6 PIN
A (VEHICLE HARNESS)
WHITE 6 PIN
WHITE 6 PIN
HOOD SWITCH
B (VEHICLE HARNESS)
A
B
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN www.idatastart.com
CL Class PTS AT
S Class PTS AT
S Class Diesel PTS AT
07-13
07-13
07-13
WIRE DESCRIPTION
CanH
CanL
CanH
CanL
CanH
CanL
~
~
~
~
~
~
Black
Black
Black
Black
Black
Black
02 pin
02 pin
02 pin
02 pin
02 pin
02 pin
TYPE 2 - WIRE CHART - 1 OF 1
WIRE COL
01 Brown/Red
02 Brown
01 Brown/Red
02 Brown
01 Brown/Red
02 Brown
Page 9 oF 22
DOC.: #14281
• 20140314
MODULE LOC
(DATA) Behind carpet, under driver seat
(DATA) Behind carpet, under driver seat
(DATA) Behind carpet, under driver seat
(DATA) Behind carpet, under driver seat
(DATA) Behind carpet, under driver seat
(DATA) Behind carpet, under driver seat
A
A
A
A
A
A
COMPONENT LOC
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN www.idatastart.com
WARNING
1-TO CONNECT THE MODULE: FOLLOW STEPS 1 TO 4
2-TO DISCONNECT THE MODULE: FOLLOW STEPS 4 TO 1
MODULE
Automotive Data Solutions Inc. © 2014
STEP 2
BLACK 20 PIN
CONNECT TO MODULE
TYPE 2 - WIRING DIAGRAM - 1 OF 2
RELAY
Page 10 oF 22
DOC.: #14281
• 20140314
STEP 1
CONNECT TO VEHICLE
START VEHICLE WITH OEM KEYFOB TO TEST CONNECTIONS
BLACK 6 PIN
BLACK 6 PIN
A (VEHICLE HARNESS)
A
B
WHITE 6 PIN
WHITE 6 PIN
B (VEHICLE HARNESS)
STEP 3
BLUE 6 PIN
CONNECT TO MODULE
BLACK 10 PIN
CAN CONNECTORS
REFER TO WIRE CHART
REFER TO COMPONENT LOCATOR
SEE MODULE PROGRAMMING PROCEDURE - PTS
TO IDENTIFY THE REQUIRED CAN CONNECTOR.
ONCE IDENTIFIED, DISCONNECT IT FROM THE CAN
JUNCTION CONNECTOR AND CONNECT IT TO C1.
CONNECT
BLACK 2 PIN
STEP 4
CONNECT IF REQUIRED
WHITE 10 PIN
07 GRAY/WHITE - HOOD STATUS (-) INPUT
08 GRAY/BLACK (NOT USED)
IF NOT EQUIPPED
WITH AN OEM HOOD SWITCH,
INSTALL AN AFTERMARKET HOOD SWITCH
01 PINK/RED - CANH
02 PINK/BLACK - CANL
CONNECT
C1
CAN JUNCTION CONNECTOR
01 CANH
02 CANL
IF THE REQUIRED CAN CONNECTOR DOES NOT FIT IN C1:
SEE NEXT PAGE FOR INSTRUCTIONS
HOOD SWITCH
AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN www.idatastart.com
TYPE 2 - WIRING DIAGRAM - 2 OF 2
INSTRUCTIONS TO CHANGE THE HOUSING OF CAN WIRES
(ONLY IF THE CAN CONNECTOR DOES NOT FIT IN C1)
Page 11 oF 22
DOC.: #14281
• 20140314
1- RELEASE RETAINING CLIP OF CAN CONNECTOR.
2- RELEASE LOCKING MECHANISM.
REMOVE CAN WIRES FROM HOUSING.
3- INSERT EMPTY HOUSING IN CAN JUNCTION CONNECTOR
(TO AVOID LOSING IT).
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN
02 - CANL
01 - CANH
4- INSERT CAN WIRES IN PROVIDED HOUSING.
CONNECT IT WITH C1 HARNESS,
AS SHOWN IN WIRING DIAGRAM.
www.idatastart.com
01
OFF
ACC ON
START
LED 1 is solid RED. Insert key into ignition.
02
OFF
ACC ON
START
Turn key to ON position.
03
Wait, LED 1 will turn solid GREEN then will turn OFF.
MODULE PROGRAMMING PROCEDURE - STD KEY - 1 OF 1
06
OFF
ACC ON
START
Turn key to OFF position. Remove key from ignition.
07
Module Programming Procedure completed.
>>
WARNING: If LED 1 fl ashes RED/GREEN, turn ignition to OFF position. The vehicle is PTS.
Follow appropriate PTS sections.
04
OFF
ACC ON
START
START vehicle for 15 seconds. LED 1 will turn solid RED.
05
Wait, LED 1 will turn solid GREEN then will turn OFF.
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN
Page 12 oF 22
DOC.: #14281
• 20140314 www.idatastart.com
MODULE PROGRAMMING PROCEDURE - PTS - 1 OF 1
>>
>>
One of the connectors of the CAN junction connector controls the keyless authorization system (Keyless Go). The following procedure will allow the module to identify the required
CAN connector.
Have the CAN junction connector accessible.
Identify every CAN connector whose CanH and CanL wires match the colors listed in the
WIRE CHART.
01
STOP ACC ON START
LED 1 is solid RED. Push start button to ON position.
ENGINE
START
STOP
02
Wait, LED 1 will fl ash RED/GREEN.
>>
04
If the parking lights do NOT fl ash, the required connector is NOT found. Reconnect it to the
CAN junction connector and repeat step 4 with another connector.
Wait, LED 1 will turn solid GREEN then will turn OFF.
05
STOP ACC ON START
START vehicle for 15 seconds. LED 1 will turn solid RED.
ENGINE
START
STOP
06
Wait, LED 1 will turn solid GREEN then will turn OFF.
03
>>
Disconnect the fi rst connector of the CAN junction connector whose CanH and CanL wires match the colors listed in the WIRE
CHART. Wait 5 seconds.
If the parking lights fl ash, the required connector is found. Connect it to the C1 connector as shown in the WIRING DIAGRAM and go to step 5.
Automotive Data Solutions Inc. © 2014
07
STOP ACC ON START
Push start button to OFF position.
ENGINE
START
STOP
08
Module Programming Procedure completed.
AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN
Page 13 oF 22
DOC.: #14281
• 20140314 www.idatastart.com
09
10
14
15
16
11
12
13
08
07
01
02
03
04
05
06
instaLLation checKList - 1 OF 2
Page 14 oF 22
DOC.: #14281
• 20140314
checKList
WARNING: Vehicle engine will start many times. Test in a well ventillated area.
Open driver door window for easy vehicle access.
Enter vehicle. Start the vehicle and let it run for 15 seconds.
Stop the vehicle and exit vehicle.
Close all vehicle doors, hood and trunk.
Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 1: Does the vehicle remote start?
YES: Go to step 7.
NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat step 6 and call technical support if the problem persists.
Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.
Question 2: Does the vehicle shut down?
YES: Go to step 8.
NO: Repeat step 7. If the problem persists, unlock the door using the OEM keyfob, enter vehicle and press brake pedal to shut down the vehicle and call technical support.
Open hood.
Question 3: Is the orange warning sticker "Sticker 1" placed under the hood?
YES: Leave hood open and go to step 9.
NO: Put the mandatory orange warning sticker "Sticker 1", leave hood open and go to step 9.
Close all doors.
Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 4: Does the vehicle remote start?
YES: Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle. Go to question 5.
NO: Go to step 11.
Question 5: Is the vehicle equipped with a factory hood switch? (Inside hood latch)
YES: The module does NOT detect the hood signal from the vehicle communication network. Call technical support.
NO: Install the mandatory hood switch included in the kit. Repeat installation checklist.
Close hood.
Enter vehicle. Do NOT press brake pedal.
Close all doors.
Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Wait for the vehicle to start.
Press brake pedal.
Question 6: Does the vehicle shut down?
YES: Go to step 17.
NO: The module does NOT detect the brake pedal signal from the vehicle communication network. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle and call technical support.
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN www.idatastart.com
instaLLation checKList - 2 OF 2
23
22
24
25
21
17
18
19
20
checKList
Exit vehicle.
Close all doors.
Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Wait for the vehicle to start.
Question 7: Is the vehicle equipped with a keyless authorization system (Keyless Go) ?
YES: Touch the exterior driver door handle to unlock door using the keyless authorization system (Keyless Go). Within 45 seconds, go to step 21.
NO: Press UNLOCK button once [1x] on the OEM keyfob. Within 45 seconds, go to step 21.
Open driver door.
Question 8: Does the vehicle shut down?
YES: The module does NOT detect the unlock signal from the vehicle communication network. Call technical support.
NO: Go to step 22.
Enter vehicle.
Question 9: Is the vehicle equipped with a keyless authorization system (Keyless Go) ?
YES: Push vehicle start button once [1x]. Go to step 23.
NO: Insert key into ignition and turn key to ON position. Go to step 23.
Press and release brake pedal.
Question 10: Does the vehicle shut down?
YES: Repeat this procedure from step 3. If the problem persists, call technical support.
NO: Go to step 24.
Shut down the vehicle.
Installation checklist completed.
Page 15 oF 22
DOC.: #14281
• 20140314
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN www.idatastart.com
>>
01
NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming.
>>
Time restriction. Complete next step within 7 seconds.
VALET MODE PROGRAMMING PROCEDURE - 1 OF 1
To exit valet mode: repeat steps 1 to 4 then
START vehicle for 15 seconds.
02
OFF ACC
ENGINE
START
STOP
Cycle ignition ON fi ve times [5x OFF/ON] rapidly. Parking Light will fl ash once [1x].
03
Wait, Parking Light will fl ash once [1x] to indicate that the valet mode is ON or twice [2x] to indicate that the valet mode is OFF.
04
OFF ACC ON START
Turn ignition to OFF position.
START
STOP
05
Valet Mode Programming Procedure completed.
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN
Page 16 oF 22
DOC.: #14281
• 20140314 www.idatastart.com
>>
01
AFTERMARKET REMOTE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: Program aftermarket remotes before usage. A maximum of four [4x] aftermarket remotes per system.
06
Time restriction. Complete next step within 7 seconds.
>>
Parking Light will fl ash once [1x].
To program additional remotes: repeat steps 4 to 6 using each additional remote.
02
OFF ACC
ENGINE
START
STOP
03
04
05
Cycle ignition ON fi ve times [5x OFF/ON] rapidly.
07
Wait, Parking Light will fl ash twice [2x].
Parking Light will fl ash once [1x].
Time restriction. Complete next step within 5 seconds from previous step.
Press once [1x] on LOCK button of aftermarket remote.
10
08
OFF ACC ON START
Turn ignition to OFF position.
09
ENGINE
STOP
OFF ACC START
START vehicle for 15 seconds.
START
STOP
Aftermarket Remote Programming Procedure completed.
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN
Page 17 oF 22
DOC.: #14281
• 20140314 www.idatastart.com
>>
>>
>>
It is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the
Module Navigation will drain vehicle battery.
To exit the Module Navigation at any time:
Follow STEP 13.
Module must be programmed to the vehicle.
04
05
Use the Module Navigation Chart on the next page.
06
01
OFF ACC ON START
Set ignition to OFF position.
ENGINE
STOP
02
TO ACCESS THE MENUS: Press and hold programming button until LED 1 turns solid
GREEN.
07
08
03
[X]
IN THE MENUS: Press the programming button as many times as the menu number indicates. LED 1 will fl ash GREEN an equal amount of times continuously.
Automotive Data Solutions Inc. © 2014
09
MODULE NAVIGATION PROCEDURE - 1 OF 1
TO ACCESS THE OPTIONS: Press and hold programming button until LED 1 turns solid
RED.
10
[Y]
IN THE OPTIONS: Press the programming button as many times as the option number indicates. LED 1 will fl ash RED an equal amount of times continuously.
TO ACCESS THE SETTINGS: Press and hold programming button until LED 1 turns solid
GREEN.
11
12
[Z]
LED 1 will flash GREEN as many times as the current (or default) setting number, continuously.
13
[Z]
IN THE SETTINGS: Press the programming button as many times as necessary to access your setting. LED 1 will fl ash GREEN an equal amount of times continuously.
To return to the MENUS: exit the Module
Navigation and redo the Module Navigation
Procedure.
14
>>
AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN
Page 18 oF 22
DOC.: #14281
• 20140314
To save and return to the OPTIONS: Press and hold programming button until LED 1 turns solid RED.
[Y]
LED 1 will fl ash RED as many times as the current option number continuously.
Configure every other setting and proceed to step 13.
MANDATORY: EXIT MODULE NAVIGATION.
Press and hold programming button for 7 seconds. LED 1 will fl ash RED rapidly. Release programming button. LED 1 will turn OFF.
Module navigation completed.
Failure to exit the Module Navigation will drain vehicle battery.
www.idatastart.com
moDuLe navigation chaRt - 1 OF 1
Page 19 oF 22
DOC.: #14281
• 20140314
moDuLe navigation chaRt: notes
I Default settings are listed in bold.
II Make sure the option is covered on the vehicle before attempting to change the setting.
*Vehicle will shutdown when a door is opened.
Automotive Data Solutions Inc. © 2014
01 CONFIGURATION
02-07 Technical Support only
AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN
01
02
03
04
05
06
07
08
09
DISARM/UNLOCK BEFORE START
RELOCK AFTER START
RELOCK AFTER SHUTDOWN
FORCE UNLOCK ALL ON FIRST PRESS
TAKEOVER
SECURE TAKEOVER DELAY
FACTORY KEYLESS RS SEQUENCE
MODULE RUN TIME
WAIT TO START DELAY
10-15 N/A
01 N/A
01
02
03
04
01
02
03
04
02
01
02
03
04
01
02
01
02
01
02
01
02
01
05
06
07
08
01
02
03
04
05
06
07
08
01
01
25 MIN
30 MIN
35 MIN
15 min
02 sec
05 SEC
08 SEC
10 SEC
15 SEC
20 SEC
25 SEC
30 SEC
N/A
N/A
oFF
ON
oFF
ON
oFF
ON
oFF
ON
enabLe
DISABLE*
45 sec
90 SEC
03 MIN
04 MIN
DISABLE
N/A
LOCK + UNLOCK + LOCK
LocK + LocK + LocK
03 MIN
05 MIN
10 MIN
15 MIN www.idatastart.com
Remote staRteR eRRoR coDes - 1 OF 1
Remote staRteR eRRoR coDes: notes
I WARNING: The following applies only when the parking lights are connected and supported by the system.
II After a remote starter failure, the parking lights will fl ash three [3x] times, then will fl ash [X] number times to indicate an error code. See table.
07
08
09
10
11
12
01
02
03
04
05
06
[X] numbeR oF PaRKing Light FLashes
Engine running.
Key in ignition at ON position.
N/A
Trunk is open.
Foot brake is ON.
Hood is open.
N/A
Tach failure.
N/A
System is in Valet Mode.
CAN communication failure
RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.
Remote staRteR shutDown eRRoR coDes: notes
I WARNING: The following applies only when the parking lights are connected and supported by the system.
II If the engine shuts down after a remote starter sequence:
Press and hold the Trunk button and the Start button at the same time for 2.5 seconds when using a 1-WAY remote.
OR
Press once [1x] on button “4” when using a 2-WAY remote.
The parking lights will fl ash four [4x] times, then will fl ash
[Y] number times to indicate an error code. See table.
01
02
03
04
05
06
07
08
09
10
11
[Y] numbeR oF PaRKing Light FLashes
Engine tach signal is lost.
N/A
Foot brake is ON.
Hood is open.
Engine RPM limiter is ON.
Glow plug timeout error.
Vehicle is moving (VSS).
Check engine warning light is ON.
Low fuel warning light is ON.
N/A
CAN communication failure during RS sequence.
Page 20 oF 22
DOC.: #14281
• 20140314
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN www.idatastart.com
moDuLe Diagnostics - 1 OF 1 test moDuLe
I DURING PROGRAMMING
II DURING REMOTE START
III WITH IGNITION OFF
Flashing RED
Solid RED
Flashing GREEN
Solid GREEN then OFF
OFF
Flashing RED
Solid RED
Flashing GREEN
Solid GREEN then OFF
OFF
Flashing RED
Solid RED
Flashing GREEN
Solid GREEN then OFF
OFF
Missing/wrong information from fi rmware or vehicle.
Module waiting for more vehicle information.
Additional steps required to complete module programming.
Module correctly programmed.
No activity or module already programmed.
Module incorrectly programmed.
Module incorrectly programmed.
Module correctly programmed and operational.
Reset in progress.
Invalid ground when running status from remote starter.
Module incorrectly programmed or connected.
Module not programmed. Waiting for more vehicle information.
False ground when running status from remote starter.
Reset in progress.
Module at rest and ready for a remote start sequence.
Page 21 oF 22
DOC.: #14281
• 20140314
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN www.idatastart.com
01
02
03
04
Disconnect all connectors from module except the BLACK 20-PIN connector.
07
MODULE RESET PROCEDURE - 1 OF 1
Reconnect all connectors.
Disconnect the BLACK 20-PIN connector.
08
Repeat programming procedure.
PRESS AND HOLD programming button while connecting the BLACK 20-PIN connector.
Wait, LED 1 will flash RED. RELEASE programming button.
LED 1 will turn RED for 2 seconds.
>>
Failure to follow procedure may result with a
DTC or a CHECK ENGINE error message.
05
06
Module RESET completed.
Automotive Data Solutions Inc. © 2014 AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN
Page 22 oF 22
DOC.: #14281
• 20140314 www.idatastart.com

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Remote Start from OEM Remotes
- Secure Takeover
- Data Immobilizer Bypass
- Arm OEM Alarm
- Disarm OEM Alarm
- Door Lock
- Door Unlock
- Trunk/Hatch Release
- Parking Light Control
- Heated Seats Control