- Computers & electronics
- Telecom & navigation
- Telephones
- Unify
- Administration Manual OpenScape Desk Phone IP
- Manual
Unify Administration Manual OpenScape Desk Phone IP manual
Add to my manuals
209 Pages
Unify Administration Manual OpenScape Desk Phone IP will aid you during installation and setup. Learn about the features, functions, and settings to optimize utilization. For administration of OpenScape Desk Phone IP via the Web-based Management (WBM), this document provides valuable guidance.
advertisement
OpenScape Desk Phone IP
Phone Administration HFA
Administration Manual
A31003-D3030-M100-02-76A9
Our Quality and Environmental Management Systems are implemented according to the requirements of the ISO9001 and
ISO14001 standards and are certified by an external certification company.
Copyright © Unify GmbH & Co. KG 07/2014
Hofmannstr. 51, 81379 Munich/Germany
All rights reserved.
Reference No.: A31003-D3030-M100-02-76A9
The information provided in this document contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products.
An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract.
Availability and technical specifications are subject to change without notice.
Unify, OpenScape, OpenStage and HiPath are registered trademarks of Unify GmbH & Co. KG.
All other company, brand, product and service names are trademarks or registered trademarks of their respective holders. unify.com
Nur für den internen Gebrauch bkTOC.fm
Content
Content
0
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 1
bkTOC.fm
Content Nur für den internen Gebrauch
3.2.2.1 Automatic VLAN discovery using LLDP-MED . . . . . . . . . . . . . . . . . . . . . . . . 3-49
3.5.11.1 SNTP is Available, but no Automatic Configuration by DHCP Server . . . . . 3-80
2
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Nur für den internen Gebrauch bkTOC.fm
Content
3.10.2.1 "Softgate V6"settings for central access to subscriber pictures . . . . . . . . 3-125
3.12.1 XML Applications/Xpressions(OpenScape Desk Phone IP 55G) . . . . . . . . . . 3-133
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 3
bkTOC.fm
Content Nur für den internen Gebrauch
3.20.4.1 Conditions and Thresholds for Report Generation . . . . . . . . . . . . . . . . . . 3-167
4
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Nur für den internen Gebrauch bkTOC.fm
Content
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 5
6 uebersicht.fm
Overview
Important Notes
1 Overview
1.1
Important Notes
7
Do not operate the equipment in environments where there is a danger of explosions.
7
For safety reasons the phone should only be operating using the supplied plug in power unit.
7
Use only original accessories. The use of other accessories may be hazardous and will render the warranty, extended manufacturer’s liability and the CE marking invalid.
7
Never open the telephone or add-on equipment. If you encounter any problems, contact System Support.
Installation requirement for USA, Canada, Norway, Finland and Sweden: Connection to networks which use outside cables is prohibited. Only in-house networks are permitted.
7
For USA and Canada only:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This product is a UL Listed Accessory, I.T.E., in U.S.A. and Canada.
This equipment also complies with the Part 68 of the FCC Rules and the Industrie
Canada CS-03.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
uebersicht.fm
Overview
Maintenance Notes
1.2
Maintenance Notes
7
Do not operate the telephone in environments where there is a danger of explosions.
7
7
Use only original accessories. Using other accessories may be dangerous, and will invalidate the warranty and the CE mark.
Never open the telephone or a key module. If you encounter any problems, contact
System Support.
1.3
About the Manual
The instructions within this manual will help you in administering and maintaining the Open-
Scape phone. The instructions contain important information for safe and proper operation of the phones. Follow them carefully to avoid improper operation and get the most out of your multi-function telephone in a network environment.
This guide is intended for service providers and network administrators who administer VoIP services using the OpenScape phone and who have a fundamental understanding of VoIP,
HFA, and IP networking. The tasks described in this guide are not intended for end users. Many of these tasks affect the ability of a phone to function on the network and require an understanding of IP networking and telephony concepts.
These instructions are laid out in a user-oriented manner, which means that you are led through the functions of the OpenScape phone step by step, wherever expedient. For the users, a separate manual is provided.
You can find further information on the official Unify website ( http://www.unify.com/.
) and on the Unify Wiki ( http://wiki.unify.com/.
).
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 7
uebersicht.fm
Overview
Conventions for this Document
1.4
Conventions for this Document
The terms for parameters and functions used in this document are derived from the web interface (WBM). In some cases, the phone’s local menu uses shorter, less specific terms and abbreviations. In a few cases the terminologies differ in wording. If so, the local menu term is added with a preceding "/".
For the parameters described in this document, a WBM screenshot and the path in the local phone menu is provided.
As some WBM input masks have been changed with firmware updates, the screenshots are selected after the following rules:
• If a later version contains more or less parameters compared to previous software versions, the screenshot of the older version is shown.
• If the title of a mask (e.g. "Pixel saver" vs. "Energy saving") or the name of a parameter
(e.g. "Time Zone" vs. "DST zone") has changed, the later version is shown.
• If a parameter has moved from one mask to another, both older and later versions are shown. The same is true for the local menu paths.
8
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
uebersicht.fm
Overview
The OpenScape Desk Phone Family
1.5
The OpenScape Desk Phone Family
The OpenScape Desp Phone Family comprises the following devices.
•
Section 1.5.1, “OpenScape Desk Phone IP 55G”
•
Section 1.5.2, “OpenScape Desk Phone IP 35G”
1.5.1
OpenScape Desk Phone IP 55G
9
2
5
1
8
3
7
4 3
10 6
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 9
uebersicht.fm
Overview
The OpenScape Desk Phone Family
1
2
3
4
5
6
7
8
9
10
Tabelle 1-1
You can make and receive calls as normal using the handset.
The large graphic display permits intuitive operation of the phone.
The Mode Keys allow easy operation of the applications featured on your telephone. To select a tab within a function press the relevant key repeatedly until the required tab is displayed.
Phone: Display telephony interface
Directory: Display phonebooks
Call Log: Display call lists
Message: Display voicemails
Services: Display Program/Service menu/Applications menu
Use the Navigation Block to conveniently navigate through the applications on your telephone.
You can customise your telephone by assigning phone numbers and functions to the Pro- grammable Keys
The Function Keys allow you to call up frequently used functions during a call (e.g. call forwarding, call transfer)
Forward: Activate/deactivate call forwarding.
Transfer: Transfers calls to other destinations.
Conference: Provides access to the conferencing features.
Hold: Places an ongoing call on hold or reconnects a held call.
The Audio Keys allow you to optimally configure the audio features on your telephone
Speaker: Turns on/off the hands-free mode (speakerphone).
Headset: Switches the audio sound to the headset or back from the headset to the handset speaker/speakerphone.
Vol. + and Vol. -: Increases/decreases the speaker/headset and handset volume.
Mute: Turns off/on the microphone during conversations. This feature is used to prevent the listening party from hearing what is being said at the calling party´s location or to prevent noise from being transmitted to all participants in conference calls.
The Softkeys allow you to call up context-dependent functions (e.g. Repeat dialling).
Incoming calls and new voicemails are visually signalled via the Call Display.
The Keypad can be used to enter phone numbers and write text.
10
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
uebersicht.fm
Overview
The OpenScape Desk Phone Family
1.5.2
OpenScape Desk Phone IP 35G
1
3
8
2
4
6
3
5
7
5
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 11
uebersicht.fm
Overview
The OpenScape Desk Phone Family
1
2
6
7
4
5
3
8
Tabelle 1-2
With the Handset, the user can pick up and dial calls in the usual manner.
The Display provides intuitive support for telephone operation and allows the user to control the phone settings via the local User menu (the display offers two lines with up to 33 characters each).
The Fixed Function Keys (not re-programmable) provide access to frequently used telephony functions, as follows:
Messages: Provides access to the Call Log, allowing the user to view and manage the lists of Missed Calls, Dialled Calls, Received Calls, Forwarded Calls and to access and manage the Voice Mail.
Settings: Provides access to the User menus for locally controlling the phone settings.
Speaker: Turns on/off the hands-free mode (speakerphone).
Headset: Switches the audio sound to the headset or back from the headset to the handset speaker/speaker phone.
Vol.+ and Vol.-: increases/decreases the speaker/headset volume.
Mute: Turns on/off the microphone during conversations. This feature is used to prevent the listening party from hearing what is being said at the calling party’s location or to prevent noise from being transmitted to all participants in conference calls.
With the Navigation Keys, the user can navigate through the various phone functions, applications and configuration menus.
The Fixed Function Keys (re-programmable via WBM) provide access to frequently used telephony functions, as follows:
Transfer: Transfers calls to other destinations.
Conference: Provides access to the conferencing features. By default, pressing this key automatically seizes an outgoing line and turns on the hands-free mode.
Hold: Places an ongoing call on hold or reconnects a held call.
The Keypad is provided for input of phone numbers, codes and text.
The Free Programmable Keys enable the user to customise the telephone in line with his/ her personal needs by assigning individual phone numbers and functions.
Preset default values:
• Forward
• Pick up
• Do Not Disturb (DND).
Inbound calls are visually signalled via the Alert Bar.
12
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
uebersicht.fm
Overview
Administration Interfaces
1.6
Administration Interfaces
You can configure the OpenStage phone by using any of the methods described in this chapter.
1.6.1
Web-based Management (WBM)
This method employs a web browser for communication with the phone via HTTPS. It is applicable for remote configuration of individual IP phones in your network. Direct access to the phone is not required.
> To use this method, the phone must first obtain IP connectivity.
1.6.2
DLS (OpenScape Deployment Service)
The OpenScape Deployment Service (DLS) is an OpenScape Management application for administering phones and soft clients in communication networks. It has a Java-supported, webbased user interface, which runs on an internet browser. For further information, please refer to the OpenScape Deployment Service Administration Guide.
1.6.3
Local Phone Menu
This method provides direct configuration of the OpenScape phone. Direct access to the phone is required.
> As long as the IP connection is not properly configured, you have to use this method to set up the phone.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 13
inbetriebnahme.fm
Startup
Prerequisites
2 Startup
2.1
Prerequisites
The OpenStage phone acts as an endpoint client on an IP telephony network, and has the following network requirements:
• An Ethernet connection to a network with HFA clients and servers.
7
Only use switches in the LAN to which the OpenScape Desk Phone IP phone is connected. An operation at hubs can cause serious malfunctions in the hub and in the whole network.
• A OpenScape Business or OpenScape 4000 V7 Communications System
• Usage of Voice VLANs is recommended.
• An FTP Server for file transfer, e. g. firmware, configuration data, application software
• A Dynamic Host Configuration Protocol (DHCP) server (recommended).
• DLS (OpenScape Deployment Service) for advanced configuration and software deployment (recommended).
For additional information see: http://wiki.unify.com/wiki/IEEE_802.1x.
2.2
Assembling and Installing the Phone
2.2.1
Shipment
• Phone
• Handset
• Handset cable
• Subpackage:
– Document "Information and Important Operating Procedures"
– Emergency number sticker
14
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
2.2.2
Connectors at the bottom side
OpenScape Desk Phone IP 55G inbetriebnahme.fm
Startup
Assembling and Installing the Phone
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 15
inbetriebnahme.fm
Startup
Assembling and Installing the Phone
OpenScape Desk Phone IP 35G
2.2.3
Assembly
1.
Handset
Insert the plug on the long end of the handset cable into the jack on the base of the telephone and press the cable into the groove provided for it. Next, insert the plug on the short end of the handset cable into the jack on the handset.
2.
Emergency Number Sticker
Write your telephone number and those for the fire and police departments on the included label and attach it to the telephone housing underneath the handset (see arrow).
16
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
inbetriebnahme.fm
Startup
Assembling and Installing the Phone
2.2.4
How to Connect the Phone
1. Plug the LAN cable into the connector at the bottom of the telephone and connect the cable to the LAN resp. switch. If PoE (Power over Ethernet) is to be used, the PSE (Power
Sourcing Equipment) must meet the IEEE 802.3af specification.
For details about the required power supply, see the following table:
Model
OpenScape Desk Phone IP 35G
1
Power Consumption/Supply
Power Class 2
OpenScape Desk Phone IP 35G + 2nd Key Module Power Class 2
OpenScape Desk Phone IP 55G
4
Power Class 3
OpenScape Desk Phone IP 55G + 2nd Key Module Power Class 3
1 Includes 1 Key Module.
2. Only if Power over Ethernet (PoE) is NOT supported:
7
The order no. for the plug-in power supply is region specific:
EU: C39280-Z4-C510
UK: C39280-Z4-C512
USA: C39280-Z4-C511
Plug the power supply unit into the mains. Connect the plug-in power supply unit to the jack at the bottom of the phone.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 17
inbetriebnahme.fm
Startup
Assembling and Installing the Phone
3. If applicable, connect the following optional jacks:
• LAN connection to PC
•
•
•
Headset (accessory)
Connection to add-on device (accessory)
USB master for connection to a USB device (e. g. accessory USB Acoustic
Adapter)
7
To prevent damage on the OpenScape Desk Phone IP phone, connect an
USB stick using the adapter cable C39195-Z7704-A5.
7
Do not connect a USB hub to the phone’s USB port, as this may lead to stability problems.
2.2.5
How to Better Use LAN Network Connections
The OpenScape Desk Phone IP 55G provides a 1000 Mbps Ethernet-Switch. This allows you to connect one additional network device (e. g. a PC) directly via the telephone to the LAN. The direct connection functionality from phone to PC needs to be activated by administrator first.
This type of connection allows you to save one network connection per switch,with the advantage of less network cables and shorter connection distances.
7
Do not use this connection for further OpenScape Desk Phone IP or
OpenStage phones!
18
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
inbetriebnahme.fm
Startup
Assembling and Installing the Phone
2.2.6
Key Module
A key module provides 12 additional program keys. Key modules are available for OpenScape
Desk Phone IP 55G phones. A maximum of 2 key modules can be connected to one phone.
The following table shows which key modules can be connected to the particular phone types.
Phone Type
OpenScape Desk Phone IP 35G
OpenScape Desk Phone IP 55G
OpenScape Key Module 55
-
2
The configuration of a key on the key module is just the same as the configuration of a phone key.
2.2.7
Using Multilingual User Interface
For further information on Using the Multilingual User Interface, please refer to platform documentation.
OpenScape 4000 V7
OpenScape 4000 V7, Section 3 - Feature Usage Examples, Service Documentation
Chapter "Multilingual User Interface"
Relevant AMOs: ZAND, SDAT, SBCSU, TAPRO
OpenScape Business
OpenScape Business V1, Administrator Documentation
Chapter "Multilingual Text Output"
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 19
inbetriebnahme.fm
Startup
Quick Start
2.3
Quick Start
This section describes a typical case: the setup of an OpenScape Desk Phone IP endpoint in an environment using a DHCP server and the web interface. For different scenarios, cross-references to the corresponding section of the administration chapter are given.
> Alternatively, the DLS (Deployment Service) administration tool can be used. Its
Plug & Play functionality allows to provide the phone with configuration data by assigning an existing data profile to the phone’s MAC address or E.164 number. For further information, see the Deployment Service Administration Manual.
> Any settings made by a DHCP server are not configurable by other configuration tools.
2.3.1
How to Access the Web Interface (WBM)
Prerequisites
• The phone´s IP address or URL is required for accessing the phone´s Web Interface via a web browser. By default, the phone will automatically search for a DHCP server on startup and try to obtain IP data and further configu-ration parameters from that central server.
• If no DHCP server is available in the IP network or if the DHCP parameter is disabled, the
IP address, subnet mask and default gateway/route must be defined manually.
• To obtain the phone´s IP address, proceed as follows:
1. Access the local phone´s Admin menu as described in Access via Local Phone.
• If DHCP is enabled (default): In the Admin menu, navigate to Network > IP configuration > IP address. The IP address is displayed.
• If DHCP is disabled or if no DHCP server is available in the IP network, the IP address,
Subnet Mask and Default Route/Gateway must be defined manually as described in
How to Manually Configure the Phone´s IP address.
2. Open your web browser (MS Internet Explorer or Firefox) and enter the appropriate URL.
Example: https://192.168.1.15 or https://myphone.phones.
For configuring the phone’s DNS name, please refer to Section 3.3.6.3, “Terminal Hostname”.
If the browser displays a certificate notification, accept it. The start page of the web interface appears. In the upper right corner, the phone number, the phone’s IP address, as well as the DNS name assigned to the phone are displayed. The left corner contains the user menu tree.
20
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
inbetriebnahme.fm
Startup
Quick Start
3. Click on the tab "Administrator Pages". In the dialog box, enter the admin password. The default password is 123456.
Admin Login
Enter Admin password:
Login Reset
4. The administration main page opens. The left column contains the menu tree. If you click on an item which is printed in normal style, the corresponding dialog opens in the center of the page. If you click on an item printed in bold letters, a sub-menu opens to the right of the main menu.
2.3.2
How to Set the Terminal Number
Prerequisites
• If the user and administrator menus are needed in the course of setup, the terminal number, which by default is identical with the phone number, must be configured first. When the phone is in delivery status, the terminal number input form is presented to the user/administrator right after booting, unless the Plug&Play facility of the DLS is used. For further information about this setting, please refer to Terminal Identity. With the WBM, the terminal number is configured as follows:
1) Log on as administrator to the WBM by entering the access data for your phone.
2) In the Administrator menu (left column), select System > System Identity to open the "System Identity" dialog. Enter the terminal number, i. e. the HFA name / phone number. For further information, please refer to Terminal Identity.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 21
inbetriebnahme.fm
Startup
Quick Start
2.3.3
Basic Network Configuration
For basic functionality, DHCP must provide the following parameters:
• IP Address : IP Address for the phone.
• Subnet Mask (option #1) : Subnet mask of the phone.
• Default Route (option #3 "Router") : IP Address of the default gateway which is used for connections beyond the subnet.
• DNS IP Addresses (option #6 "Domain Server") : IP Addresses of the primary and secondary DNS servers.
If no DHCP server is present, see Section 3.3.3, “IP Address - Manual Configuration” for IP ad-
dress and subnet mask, and Section 3.3.4, “Default Route/Gateway” for the default route.
22
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
inbetriebnahme.fm
Startup
Quick Start
2.3.4
Extended Network Configuration
To have constant access to other subnets, you can enter a total of two more network destinations. For each further domain/subnet you wish to use, first the IP address for the destination, and then that of the router must be given. The option’s name and code are as follows:
• option #33 "Static Routing Table"
For manual configuration of specific/static routing see Section 3.3.5, “Specific IP Routing”.
Also the DNS domain wherein the phone is located can be specified by DHCP. The option’s name and code are as follows:
• option #15 "Domain Name"
For manual configuration of the DNS domain name see Section 3.3.6.1, “DNS Domain Name”.
2.3.5
VLAN Discovery
If the phone is to be located in a VLAN (Virtual LAN), a VLAN ID must be assigned. If the VLAN
cific, thus a specific procedure is necessary.
2.3.5.1
Using a Vendor Class
It is recommended to define a vendor class on the DHCP server, thus enabling server and phone to exchange vendor-specific data exclusively. The data is disclosed from other clients.
The following steps are required for the configuration of the Windows DHCP server.
Setting up a new vendor class using the Windows DHCP Server
1. In the Windows Start menu, select Start > Programs > Administrative Tools > DHCP.
2. In the DHCP console menu, right-click the DHCP server in question and select Define
Vendor Classes...
in the context menu.
3. A dialog window opens with a list of the classes that are already available.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 23
inbetriebnahme.fm
Startup
Quick Start
4. Define a new vendor class with the name OptiIpPhone and enter a description of this class.
Click OK to apply the changes. The new vendor class now appears in the list.
5. Exit the window with Close.
Add Options to the New Vendor Class
Next, two options resp. tags will be added to the vendor class. Two passes are needed for this: in the first pass, tag #1 with the required value "Siemens" is entered, and in the second pass, the VLAN ID is entered as tag #2.
24
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
inbetriebnahme.fm
Startup
Quick Start
> For DHCP servers on a Windows 2003 Server (pre-SP2):
Windows 2003 Server contains a bug that prevents you from using the DHCP console to create an option with the ID 1 for a user-defined vendor class. Instead, this entry must be created with the netsh tool in the command line (DOS shell).
You can use the following command to configure the required option (without error message) so that it is also appears later in the DHCP console: netsh dhcp server add optiondef 1 "Optipoint element 001"
STRING 0 vendor=OptiIpPhone comment="Tag 001 for Optipoint"
The value SIEMENS for optiPoint Element 1 can then be re-assigned over the
DHCP console.
This error was corrected in Windows 2003 Server SP2.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 25
inbetriebnahme.fm
Startup
Quick Start
6. In the DHCP console menu, right-click the DHCP server in question and select Set Predefined Options from the context menu.
7. In the dialog, select the previously defined OptiIpPhone class and click on Add... to add a new option.
26
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
8. Enter the following data for the new option:
1. First Pass: Option 1
• Name: Free text, e. g. "OptiIpPhone element 01"
• Data type: "String"
• Code: "1"
• Description: Free text.
2. Second Pass: Option 2
• Name: Free text, e. g. "OptiIpPhone element 02"
• Data type: "Long"
• Code: "2"
• Description: Free text.
9. Enter the value for this option.
1. First Pass: "Siemens"
2. Second Pass: VLAN ID inbetriebnahme.fm
Startup
Quick Start
10. Press OK, repeat steps 7 to 9 for the second pass, and press OK again.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 27
inbetriebnahme.fm
Startup
Quick Start
Defining the scope for the new vendor class
11. Select the DHCP server in question and the Scope and right-click Scope Options. Select
Configure Options...
in the context menu.
12. Select the Advanced tab. Under Vendor class, select the class that you previously defined (OptiIpPhone) and, under User class, select Default User Class.
Activate the check boxes for the options that you want to assign to the scope (in the example, 001, 002, and 003). Click OK.
13. The DHCP console now shows the information that will be transmitted for the corresponding workpoints. Information from the Standard vendor is transmitted to all clients, whereas information from the OptiIpPhone vendor is transmitted only to the clients (workpoints) in this vendor class.
28
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
inbetriebnahme.fm
Startup
Quick Start
Setup using a DHCP server on Unix/Linux
The following snippet from a DHCP configuration file (usually dhcpd.conf) shows how to set up a configuration using a vendor class and the "vendor-encapsulated-options" option.
class "OptiIpPhone" { option vendor-encapsulated-options
# The vendor encapsulated options consist of hexadecimal values for the option number (for instance, 01), the length of the value (for instance, 07), and the value (for instance, 53:69:65:6D:65:6E:73). The options can be written in separate lines; the last option must be followed by a ’;’ instead of a ’:’.
# Tag/Option #1: Vendor "Siemens"
#1 7 S i e m e n s
01:07:53:69:65:6D:65:6E:73:
# Tag/Option #2: VLAN ID
#2 4 0 0 1 0
02:04:00:00:00:0A; match if substring (option vendor-class-identifier, 0, 11) =
"OptiIpPhone";
}
2.3.5.2
Using Option #43 "Vendor Specific"
Alternatively, option #43 can be used for setting up the VLAN ID. Two tags are required:
• Tag 001: Vendor name
• Tag 002: VLAN ID
The Vendor name tag is coded as follows (the first line indicates the ASCII values, the second line contains the hexadecimal values):
Code
1
01
Length
7
07
Vendor name
S
53 i
69 e
65 m e
6D 65 n
6E s
73
The following example shows a VLAN ID with the decimal value "10":
Code
2
02
Length
4
04
VLAN ID
0
00
0
00
1
00
0
0A
For manual configuration of the VLAN ID see Section 3.2.2.2, “Manual configuration of a VLAN
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 29
inbetriebnahme.fm
Startup
Quick Start
Setup using the Windows DHCP Server
1. In the Windows Start menu, select Start > Programs > Administrative Tools > DHCP.
2. Select the DHCP server and the scope. Choose "Configure Options" in the context menu using the right mouse button.
3. Enter the VLAN ID. Providing the length is not required here, as the VLAN ID is always 4
Bytes long.
30
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
inbetriebnahme.fm
Startup
Quick Start
2.3.6
DLS Server Address
This setting only applies if a DLS (Deployment Service) server is in use.
It is recommended to configure the DLS server address by DCHP, as this method enables full
Plug & Play and ensures the authenticity of the DLS server.
For the configuration of vendor-specific settings by DHCP, there are two alternative methods:
1) the use of a vendor class, or 2) the use of DHCP option 43.
2.3.6.1
Using Vendor Class
It is recommended to define a vendor class on the DHCP server, thus enabling server and phone to exchange vendor-specific data exclusively. The data is disclosed from other clients.
If not done already, create a vendor class by the name of "OptiIpPhone".
The following steps are required for the configuration of the Windows DHCP server.
Setting up a new vendor class using the Windows DHCP Server
1. In the Windows Start menu, select Start > Programs > Administrative Tools > DHCP.
2. In the DHCP console menu, right-click the DHCP server in question and select Define
Vendor Classes...
in the context menu.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 31
inbetriebnahme.fm
Startup
Quick Start
3. A dialog window opens with a list of the classes that are already available.
4. Define a new vendor class with the name OptiIpPhone and enter a description of this class.
Click OK to apply the changes. The new vendor class now appears in the list.
5. Exit the window with Close.
32
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
inbetriebnahme.fm
Startup
Quick Start
Add Options to the New Vendor Class
Next, two options resp. tags will be added to the vendor class. Two passes are needed for this: in the first pass, tag #1 with the required value "Siemens" is entered, and in the second pass, the DLS address is entered as tag #3.
> For DHCP servers on a Windows 2003 Server (pre-SP2):
Windows 2003 Server contains a bug that prevents you from using the DHCP console to create an option with the ID 1 for a user-defined vendor class. Instead, this entry must be created with the netsh tool in the command line (DOS shell).
You can use the following command to configure the required option (without error message) so that it is also appears later in the DHCP console: netsh dhcp server add optiondef 1 "Optipoint element 001"
STRING 0 vendor=OptiIpPhone comment="Tag 001 for Optipoint"
The value SIEMENS for optiPoint Element 1 can then be re-assigned over the
DHCP console.
This error was corrected in Windows 2003 Server SP2.
6. In the DHCP console menu, right-click the DHCP server in question and select Set Predefined Options from the context menu.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 33
inbetriebnahme.fm
Startup
Quick Start
7. In the dialog, select the previously defined OptiIpPhone class and click on Add... to add a new option.
8. Enter the following data for the new option:
1. First Pass: Option 1
• Name: Free text, e. g. "OptiIpPhone element 01"
• Data type: "String"
• Code: "1"
• Description: Free text.
2. Second Pass: Option 3
• Name: Free text, e. g. "OptiIpPhone element 03"
• Data type: "String"
• Code: "3"
• Description: Free text.
34
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
inbetriebnahme.fm
Startup
Quick Start
9. Enter the value for this option.
1. First Pass: "Siemens"
2. Second Pass: DLS address
The DLS address has the following format:
<PROTOCOL>:://<IP ADDRESS OF DLS SERVER>:<PORT NUMBER>
Example: sdlp://192.168.3.30:18443
10. Press OK, repeat steps 7 to 9 for the second pass, and press OK again.
Defining the scope for the new vendor class
11. Select the DHCP server in question and the Scope and right-click Scope Options. Select
Configure Options...
in the context menu.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 35
inbetriebnahme.fm
Startup
Quick Start
12. Select the Advanced tab. Under Vendor class, select the class that you previously defined (OptiIpPhone) and, under User class, select Default User Class.
Activate the check boxes for the options that you want to assign to the scope (in the example, 001 and 003)
13. The DHCP console now shows the information that will be transmitted for the corresponding workpoints. Information from the Standard vendor is transmitted to all clients, whereas information from the OptiIpPhone vendor is transmitted only to the clients (workpoints) in this vendor class.
36
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
inbetriebnahme.fm
Startup
Quick Start
Setup using a DHCP server on Unix/Linux
The following snippet from a DHCP configuration file (usually dhcpd.conf) shows how to set up a configuration using a vendor class and the "vendor-encapsulated-options" option.
class "OptiIpPhone" { option vendor-encapsulated-options
# The vendor encapsulated options consist of hexadecimal values for the option number (for instance, 01), the length of the value (for instance, 07), and the value (for instance, 53:69:65:6D:65:6E:73). The options can be written in separate lines; the last option must be followed by a ’;’ instead of a ’:’.
# Tag/Option #1: Vendor "Siemens"
03:19:73:64:6C:70:3A:2F:2F:31:39:32:2E:31:36:38:2E:33:2E:33:30:
3A:31:38:34:34:33; match if substring (option vendor-class-identifier, 0, 11) =
"OptiIpPhone";
}
#1 7 S i e m e n s
01:07:53:69:65:6D:65:6E:73:
# Tag/Option #3: DLS IP Address (here: sdlp://192.168.3.30:18443)
#3 25 s d l p : / / 1 9 2 .
1 6 8 .
3 . ...etc.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 37
inbetriebnahme.fm
Startup
Quick Start
2.3.6.2
Using Option #43 "Vendor Specific"
Alternatively, option #43 can be used for setting up the DLS address. Two tags are required:
• Tag 001: Vendor name
• Tag 003: DLS IP address
Additionally, you can enter a host name for the DLS server:
• Tag 004: DLS hostname
The data is entered in hexadecimal values. Note that the length of the information contained in a tag must be given.
The Vendor name tag is coded as follows (the first line indicates the ASCII values, the second line contains the hexadecimal values):
Code
1
01
Length
7
07
Vendor name
S
53 i
69 e
65 m e
6D 65 n
6E s
73
The DLS IP address tag consists of the protocol prefix "sdlp://", the IP address of the DLS server, and the DLS port number, which is "18443" by default. The following example illustrates the syntax:
Code Length DLS IP address
3 25 s d l p : / / 1 9 2 . 1 6 8 . 2 . 1 9 : 1 8 4 4 3
03 19
38
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
inbetriebnahme.fm
Startup
Quick Start
Setup using the Windows DHCP Server
1. In the Windows Start menu, select Start > Programs > Administrative Tools > DHCP.
2. Select the DHCP server and the scope. Choose "Configure Options" in the context menu using the right mouse button. [Engl. Screenshot]
3. Enter the IP address and port number of the DLS server.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 39
inbetriebnahme.fm
Startup
Quick Start
2.3.7
HFA Gateway Settings
To connect the OpenScape Desk Phone IP phone to the OpenScape Business or OpenScape
4000 V7 Communication System, the IP address of the gateway, a subscriber number and the corresponding password is needed. The subscriber number can be 1 to 24 characters long, and is used as the internal telephone number.
2.3.8
Using the Web Interface (WBM)
1. Log in to the Administrator Pages of the WBM. For details about accessing the WBM, see
Section 2.3.1, “How to Access the Web Interface (WBM)”.
2. In the menu at the lefthand side, go to System > Gateway.
3. Enter the IP address of the OpenScape Business or OpenScape 4000 V7 Communication
System in the IP address field.
4. In the Subscriber number field, enter the internal extension number of the phone. It can be 1 to 24 characters long.
5. Enter the subscriber password in the Password field.
2.3.9
Using the Local Menu
Take the following steps to configure the access to an HFA gateway (for further information see
Section 3.1, “Access via Local Phone”):
1. Press the mode key v once or twice to activate the administration menu (the key toggles between the user’s configuration menu and the administration menu).
2. When the Admin menu is active, you will be prompted to enter the administrator password.
The default admin password is "123456". It is recommended to change the password (see
Section 3.11, "Password”) after your first login.
3. In the administration menu, go to System > Gateway. For further instructions on entering
data using the Local menu see Section 3.1, “Navigate within the Administration Menu”. The
path is as follows:
|
---
Administration
|
---
System
|
---
Gateway
|--- System type
|--- IP address
|--- Gateway ID
|
|--- Subscriber number
--- Password
4. Enter the IP address of the HFA gateway provided by your OpenScape Communication
System.
40
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
inbetriebnahme.fm
Startup
Quick Start
5. Enter the phone’s Gateway Id, which will also serve as internal phone number.
6. Enter the password associated with the Gateway Id.
7. After the data has been entered, select Save & exit and press .
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 41
administration.fm
Administration
Access via Local Phone
3 Administration
This chapter describes the configuration of every parameter available on the OpenScape Desk
Phone IP phones. For access via the local phone menu, see the following; for access using the
web interface (WBM), please refer to Section 2.3.1, “How to Access the Web Interface (WBM)”.
3.1
Access via Local Phone
> The data entered in input fields is parsed and controlled by the phone. Thus, data is accepted only if it complies to the value range.
1. Access the Administration Menu
Press the Services (Settings on DPIP 35G), Up Arrow or Down Arrow and OK keys consecutively to select the Admin menu.
2. When the Administration Menu is active, you will be prompted to enter the admin password.
The default admin password is "123456". It is recommended to change the password (see
Section 3.13, “Password”) after your first login.
For entering passwords with non-numeric characters, please consider the following:
By default, password entry is in numeric mode and a minimum length of 6 characters. For changing the mode, press the # key once or repeatedly, depending on the desired character. The # key cycles around the input modes as follows:
(Abc) -> (abc) -> (123) -> (ABC) -> back to start.
Usable characters are 0-9 A-Z a-z .*#,?!’"+-()@/:_
3. Navigate within the Administration Menu
42
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Access via Local Phone
OpenScape Desk Phone IP 35G
Use the Navigation Keys to navigate and execute administrative actions in the Administration
Menu.
Press the key briefly:
- Scroll up
Press the key:
In Idle mode:
- Open idle menu
In lists and menus:
- Scroll down
Press the key:
- Scroll down
Hold down the key:
- Scroll to end of list
Press the OK key:
- Confirm entries
- Perform an action
OpenScape Desk Phone IP 55G
Use the Navigation Block to navigate in lists and menus, and between input fields. Use the central OK key to confirm options and trigger actions.
Press the key.
In lists and menus:
- Scroll up
Hold down key: Scroll to top of list/menu
Press the Undo key.
An entry is selected:
- Cancel action
In entry fields:
- Delete character to the left of the cursor
Press the > key:
- Move right in row
Press the OK key.
An entry is selected:
- Perform action
- Confirm selection
Press the key.
In lists and menus:
- Scroll down
Hold down key: Scroll to end of list/menu
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 43
administration.fm
Administration
Access via Local Phone
4. Select a parameter
If a parameter is set by choosing a value from a selective list, an arrow symbol appears in the parameter field that has the focus. Press the OK key to enter the selective list. Use the
Up Arrow and Down Arrow keys to scroll up and down in the selection list. To select a list entry, press the OK key.
5. Enter the parameter value
For selecting numbers and characters, you can use special keys. See the following table:
Key Key Function during text input
* Enter special characters.
#
Key function when held down
Ringer on/off.
Toggle between lowercase characters, uppercase characters, and digits in the following order:
(Abc) -> (abc) -> (123) -> (ABC) -> back to start.
Phonelock on/off.
With the OpenScape Desk Phone IP 33G/55G use the keypad for entering parameter values. Use the Navigation Keys or Navigation Block to navigate and execute administrative actions in the Administration Menu.
6. Save and exit
When you are done, select Save & exit and press OK key.
44
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
LAN Settings
3.2
LAN Settings
3.2.1
LAN Port Settings
The OpenScape Desk Phone IP phone provides an integrated switch which connects the LAN, the phone itself and a PC port. By default, the switch will auto negotiate transfer rate (10/100/
1000 Mb/s autosensing, configurable) and duplex method (full or half duplex) with whatever equipment is connected. Optionally, the required transfer rate and duplex mode can be specified manually using the LAN Port Speed parameter.
> In the default configuration, the LAN port supports automatic detection of cable configuration (pass through or crossover cable) and will reconfigure itself as needed to connect to the network. If the phone is set up to manually configure the switch port settings, the cable detection mechanism is disabled. In this case care must be taken to use the correct cable type.
The PC Ethernet port (default setting: Disabled) is controlled by the PC port mode parameter.
If set to "Disabled", the PC port is inactive; if set to "Enabled", it is active. If set to "Mirror", the data traffic at the LAN port is mirrored at the PC port. This setting is for diagnostic purposes. If, for instance, a PC running Ethereal/Wireshark is connected to the PC port, all network activities at the phone’s LAN port can be captured.
> Do not use this connection for further OpenScape Desk Phone IP or OpenStage phones!
> Removing the power from the phone or a phone reset/reboot will result in the temporary loss of the network connection to the PC port.
When PC port autoMDIX is enabled, the switch determines automatically whether a regular
MDI connector or a MDI-X (crossover) connector is needed, and configures the connector accordingly.
Data required
•
LAN port speed
: Settings for the ethernet port connected to a LAN switch.
Value range: "Automatic," "10 Mbps half duplex", "10 Mbps full duplex", "100 Mbps half duplex", "100 Mbps full duplex", "1000 Mbps half duplex" (Desk Phone IP 55G), "1000 Mbps full duplex" (Desk Phone IP 55G) .
Default: "Automatic"
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 45
administration.fm
Administration
LAN Settings
• PC port speed / PC port type: Settings for the ethernet port connected to a PC.
Value range: "Automatic," "10 Mbps half duplex", "10 Mbps full duplex", "100 Mbps half duplex", "100 Mbps full duplex", "1000 Mbps half duplex" (Desk Phone IP 55G), "1000 Mbps full duplex" (Desk Phone IP 55G).
Default: "Automatic"
• PC port mode / PC port status: Controls the PC port.
Value range: "disabled", "enabled", "mirror".
Default: "disabled"
• PC port autoMDIX : Switches between MDI and MDI-X automatically.
Value range: "On", "Off"
Default: "Off"
Administration via WBM
Network > Port configuration
Port configuration
Gateway
Standby gateway
RTP base
System H.225
Standby H.225
System Cornet TLS
Standby Cornet TLS
System H.225 TLS
Standby H.225 TLS
Download server (default)
LDAP server
HTTP Proxy
LAN port speed
PC port speed
PC port mode
PC port autoMDIX
Automatic
Automatic disabled
Submit Reset
4060
4060
5004
1720
1720
4061
4061
1300
1300
21
389
0
Administration via Local Phone
|
--Admin
|
--Network
|
--Port Configuration
|
--Number
|--- LAN port type
|--- PC port status
|
|--- PC port type
--- PC port autoMDIX
46
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
LAN Settings
3.2.2
VLAN
VLAN (Virtual Local Area Network) is a technology that allows network administrators to partition one physical network into a set of virtual networks (or broadcast domains).
Partitioning a physical network into separate VLANs allows a network administrator to build a more robust network infrastructure. A good example is a separation of the data and voice networks into data and voice VLANs. This isolates the two networks and helps shield the endpoints within the voice network from disturbances in the data network and vice versa.
> The implementation of a voice network based on VLANs requires the network infrastructure (the switch fabric) to support VLANs.
In a layer 1 VLAN, the ports of a VLAN-aware switch are assigned to a VLAN statically. The switch only forwards traffic to a particular port if that port is a member of the VLAN that the traffic is allocated to. Any device connected to a VLAN-assigned port is automatically a member of this VLAN, without being a VLAN aware device itself. If two or more network clients are connected to one port, they cannot be assigned to different VLANs. When a network client is moving from one switch to another, the switches’ ports have to be updated accordingly by hand.
With a layer 2 VLAN, the assignment of VLANs to network clients is realized by the MAC addresses of the network devices. In some environments, the mapping of VLANs and MAC addresses can be stored and managed by a central database. Alternatively, the VLAN ID, which defines the VLAN whereof the device is a member, can be assigned directly to the device, e. g. by DHCP. The task of determining the VLAN for which an Ethernet packet is destined is carried out by VLAN tags within each Ethernet frame. As the MAC addresses are (more or less) wired to the devices, mobility does not require any administrator action, as opposed to layer 1 VLAN.
The phone must be configured as a VLAN aware endpoint if the phone itself is a member of the voice VLAN, and the PC connected to the phone’s PC port is a member of the data VLAN.
There are 3 ways for configuring the VLAN ID:
• Manually
• By DHCP
• By LLDP-MED
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 47
administration.fm
Administration
LAN Settings
Administration via WBM
Network > IP configuration
You must click on change mode first. Afterwards, the IP configuration mode dialog opens.
IP configuration change mode
LLDP-MED Enabled
DHCP Enabled
IP address
Subnet mask
Default route
DNS domain
Primary DNS
Secondary DNS
192.168.1.105
255.255.255.0
192.168.1.2
192.168.1.2
Route 1 IP address
Route 1 gateway
Route 1 mask
Route 2 IP address
Route 2 gateway
Route 2 mask
VLAN discovery
VLAN ID
HTTP proxy
Submit Reset
Network > IP configuration > change mode
To enable VLAN discovery by DHCP, select DHCP used in the Discovery mode menu. Afterwards, click Submit.
IP configuration mode
Discovery mode DHCP used back to IP configuration
Submit Reset
48
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
LAN Settings
Administration via Local Phone
To enable VLAN discovery by DHCP, select DHCP used in the Discovery mode menu.
|
---
Administration
|
---
Network
|
---
IP configuration
|
--- Discovery mode
3.2.2.1
Automatic VLAN discovery using LLDP-MED
This is the default setting. The VLAN ID is configured by the network switch using LLDP-MED
(Link Layer Discovery Protocol-Media Endpoint Discovery). If the switch provides an appropriate TLV (Type-Length-Value) element containing the VLAN ID, this VLAN ID will be used. If no appropriate TLV is received, DHCP will be used for VLAN discovery.
Administration via WBM
Network > IP configuration
First, click on change mode. Afterwards, the IP configuration mode dialog opens.
IP configuration change mode
LLDP-MED Enabled
DHCP Enabled
IP address
Subnet mask
192.168.1.105
255.255.255.0
192.168.1.2
Default route
DNS domain
Primary DNS
Secondary DNS
Route 1 IP address
Route 1 gateway
Route 1 mask
192.168.1.2
Route 2 IP address
Route 2 gateway
Route 2 mask
VLAN discovery
VLAN ID
HTTP proxy
Submit Reset
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 49
administration.fm
Administration
LAN Settings
Network > IP configuration > change mode
To enable VLAN discovery by LLDP-MED, select LLDP-MED with DHCP in the Discovery mode menu. Afterwards, click Submit.
IP configuration mode
Discovery mode LLDP-MED with DHCP back to IP configuration
Submit Reset
Administration via Local Phone
To enable VLAN discovery by DHCP, select LLDP-MED with DHCP in the Discovery mode menu.
|
--Administration
|
--Network
|
--IP configuration
|
--- Discovery mode
50
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
LAN Settings
3.2.2.2
Manual configuration of a VLAN ID
To configure layer 2 VLAN manually, first make sure that VLAN discovery is set to "Manual"
(see Section 3.2.2.1, “Automatic VLAN discovery using LLDP-MED”). Then, the phone must be
provided with a VLAN ID between 1 and 4095. If you misconfigure a phone to an incorrect
VLAN, the phone will possibly not connect to the network. In DHCP mode it will behave as though the DHCP server cannot be found, in fixed IP mode no server connections will be possible.
Administration via WBM
Network > IP configuration
IP configuration
Disable DHCP
LLDP-MED Enabled
DHCP Enabled
IP address
Subnet mask
Default route
DNS domain
Primary DNS
Secondary DNS
192.168.1.105
255.255.255.0
192.168.1.2
192.168.1.105
192.168.1.2
Route 1 IP address
Route 1 gateway
Route 1 mask
Route 2 IP address
Route 2 gateway
Route 2 mask
DHCP VLAN discovery
VLAN ID
HTTP proxy
Submit Reset
Administration via Local Phone
|
--Admin
|
--Network
|
--IP Configuration
|
--- VLAN ID
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 51
administration.fm
Administration
IP Network Parameters
3.3
IP Network Parameters
3.3.1
Quality of Service (QoS)
The QoS technology based on layer 2 and the two QoS technologies Diffserv and TOS/IP Precedence based on layer 3 are allowing the VoIP application to request and receive predictable service levels in terms of data throughput capacity (bandwidth), latency variations (jitter), and delay.
> Layer 2 and 3 QoS for voice transmission can be set via LLDP-MED (see LLDP-
MED). If so, the value can not be changed by any other interface.
3.3.1.1
Layer 2 / 802.1p
QoS on layer 2 is using 3 Bits in the 802.1q/p 4-Byte VLAN tag which has to be added in the
Ethernet header.
The CoS (class of service) value can be set from 0 to 7. 7 is describing the highest priority and is reserved for network management. 5 is used for voice (RTP-streams) by default. 3 is used for signaling by default.
Three Bits Used for CoS
(User Priority)
PREAM.
SFD DA SA
TAG
4 Bytes
PT DATA FCS
Data required
•
Layer 2
: Activates or deactivates QoS on layer 2.
Value range: "Yes", "No"
Default: "Yes"
•
Layer 2 voice
: Sets the CoS (Class of Service) value for voice data (RTP streams).
Value range: 0-7
Default: 5
•
Layer 2 signalling
: Sets the CoS (Class of Service) value for signaling.
Value range: 0-7
Default: 3
•
Layer 2 default
: Sets the default CoS (Class of Service) value.
Value range: 0-7
Default: 0
52
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
IP Network Parameters
Administration via WBM
Network > QoS
QoS
Layer 2
Layer 2 voice
Layer 2 signalling
Layer 2 default
Layer 3
Layer 3 voice
Layer 3 signalling
5
3
0
EF
AF31
;
Administration via Local Phone
|
--Admin
|
--Network
|
--QoS
|
--Service
|--- Layer 2
|--- Layer 2 voice
|
|--- Layer 2 signalling
--- Layer 2 default
3.3.1.2
Layer 3 / Diffserv
Diffserv assigns a class of service to an IP packet by adding an entry in the IP header.
Traffic flows are classified into 3 per-hop behavior groups:
1. Default
Any traffic that does not meet the requirements of any of the other defined classes is placed in the default per-hop behaviour group. Typically, the forwarding has best-effort forwarding characteristics. The DSCP (Diffserv Codepoint) value for Default is "0 0 0 0 0 0".
2. Expedited Forwarding (EF referred to RFC 3246)
Expedited Forwarding is used for voice (RTP streams) by default. It effectively creates a special low-latency path in the network. The DSCP (Diffserv Codepoint) value for EF is
"1 0 1 1 1 0".
3. Assured Forwarding (AF referred to RFC 2597)
Assured forwarding is used for signaling messages by default (AF31). It is less stringent than EF in a multiple dropping system. The AF values are containing two digits X and Y
(AFXY), where X is describing the priority class and Y the drop level.
Four classes X are reserved for AFXY: AF1Y (low priority), AF2Y, AF3Y and AF4Y (high priority).
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 53
administration.fm
Administration
IP Network Parameters
Three drop levels Y are reserved for AFXY: AFX1 (low drop probability), AFX2 and AFX3
(High drop probability). In the case of low drop level, packets are buffered over an extended period in the case of high drop level, packets are promptly rejected if they cannot be forwarded.
Data required
• Layer 3 : Activates or deactivates QoS on layer 3.
Value range: "Yes", "No"
Default: "Yes"
• Layer 3 voice : Sets the CoS (Class of Service) value for voice data (RTP streams).
Value range: "BE", "AF11", "AF12", "AF13", "AF21", "AF22", "AF23", "AF31", "AF32",
"AF33", "AF41", "AF42", "AF43", "EF", "CS7", "CS3", "CS4", "CS5", 0, 1, 2 ... through 63.
Default: "EF"
• Layer 3 signalling : Sets the CoS (Class of Service) value for signaling.
Value range: "BE", "AF11", "AF12", "AF13", "AF21", "AF22", "AF23", "AF31", "AF32",
"AF33", "AF41", "AF42", "AF43", "EF", "CS7", "CS3", "CS4", "CS5", 0, 1, 2 ... through 63.
Default: "AF31"
Administration via WBM
Network > QoS
QoS
Layer 2
Layer 2 voice
Layer 2 signalling
Layer 2 default
Layer 3
Layer 3 voice
Layer 3 signalling
5
3
0
EF
AF31
;
Administration via Local Phone
|
--Admin
|
--Network
|
--QoS
|
--Service
|--- Layer 3
|
|--- Layer 3 voice
--- Layer 3 signalling
54
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
IP Network Parameters
3.3.2
Use DHCP
If this parameter is set to "Yes" (default), the phone will search for a DHCP server on startup and try to obtain IP data and further configuration parameters from that central server.
If no DHCP server is available in the IP network, please deactivate this option. In this case, the
IP address, subnet mask and default gateway/route must be defined manually.
> The change will only have effect if you restart the phone.
The phone is able to maintain its IP connection even in case of DHCP server failure.
For further information, please refer to DHCP Resilience.
The following parameters can be obtained by DHCP:
Basic Configuration
• IP Address
• Subnet Mask
Optional Configuration
• Default Route (Routers option 3)
• IP Routing/Route 1 & 2 (Static Routes option 33)
• SNTP IP Address (NTP Server option 42)
• Timezone offset (Time Server Offset option 2)
• Primary/Secondary DNS (DNS Server option 6)
• DNS Domain Name (DNS Domain option 15)
• Vendor Unique (option 43)
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 55
administration.fm
Administration
IP Network Parameters
Administration via WBM
Network > IP configuration
IP configuration
Disable DHCP
LLDP-MED Enabled
DHCP Enabled
IP address
Subnet mask
Default route
DNS domain
Primary DNS
Secondary DNS
Route 1 IP address
Route 1 gateway
Route 1 mask
Route 2 IP address
Route 2 gateway
Route 2 mask
192.168.1.105
255.255.255.0
192.168.1.2
192.168.1.105
192.168.1.2
VLAN discovery
VLAN ID
HTTP proxy
DHCP
Submit Reset
Administration via Local Phone
|
--Admin
|
--Network
|
--IP Configuration
|
--- Use DHCP
56
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
IP Network Parameters
3.3.3
IP Address - Manual Configuration
If not provided by DHCP dynamically, you must specify the phone’s IP address and subnet mask manually.
Data required
•
IP address
: used for addressing the phone.
•
Subnet mask
: subnet mask that is needed for the subnet in use.
Administration via WBM
Network > IP configuration
IP configuration
Disable DHCP
LLDP-MED Enabled
DHCP Enabled
IP address
Subnet mask
192.168.1.105
255.255.255.0
192.168.1.2
Default route
DNS domain
Primary DNS
Secondary DNS
192.168.1.105
192.168.1.2
Route 1 IP address
Route 1 gateway
Route 1 mask
Route 2 IP address
Route 2 gateway
Route 2 mask
VLAN discovery
VLAN ID
HTTP proxy
DHCP
Submit Reset
Administration via Local Phone
|
--Admin
|
--Network
|
--IP Configuration
|
|--- IP address
--- Subnet mask
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 57
administration.fm
Administration
IP Network Parameters
3.3.4
Default Route/Gateway
If not provided by DHCP dynamically (see Section 3.3.2, “Use DHCP”), enter the IP address of
the router that links your IP network to other networks. If the value was assigned by DHCP, it can only be read.
> The change will only have effect if you restart the phone.
Administration via WBM
Network > IP configuration
IP configuration
Disable DHCP
LLDP-MED Enabled
DHCP Enabled
IP address
Subnet mask
Default route
DNS domain
Primary DNS
Secondary DNS
192.168.1.105
255.255.255.0
192.168.1.2
192.168.1.105
192.168.1.2
Route 1 IP address
Route 1 gateway
Route 1 mask
Route 2 IP address
Route 2 gateway
Route 2 mask
VLAN discovery
VLAN ID
HTTP proxy
DHCP
Submit Reset
Administration via Local Phone
|
--Admin
|
--Network
|
--IP Configuration
|
--- Default route (GW)
58
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
IP Network Parameters
3.3.5
Specific IP Routing
To have constant access to network subscribers of other domains, you can enter a total of two more network destinations, in addition to the default route/gateway. This is useful if the LAN has more than one router or if the LAN is divided into subnets.
Data required
• Route 1/2 IP address : IP address of the selected route.
• Route 1/2 gateway : IP address of the gateway for the selected route.
• Route 1/2 mask : Network mask for the selected route.
Administration via WBM
Network > IP configuration
IP configuration
Disable DHCP
LLDP-MED Enabled
DHCP Enabled
IP address
Subnet mask
Default route
DNS domain
Primary DNS
Secondary DNS
Route 1 IP address
Route 1 gateway
Route 1 mask
Route 2 IP address
Route 2 gateway
Route 2 mask
192.168.1.105
255.255.255.0
192.168.1.2
192.168.1.105
192.168.1.2
VLAN discovery
VLAN ID
HTTP proxy
DHCP
Submit Reset
Administration via Local Phone
|
--Admin
|
--Network
|
--IP Configuration
|--- Route 1 IP
|--- Route 1 gateway
|--- Route 1 mask
|--- Route 2 IP
|
|--- Route 2 gateway
--- Route 2 mask
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 59
administration.fm
Administration
IP Network Parameters
3.3.6
DNS
The main task of the domain name system (DNS) is to translate domain names to IP addresses. For some features and functions of the OpenScape Desk Phone IP phone, it is necessary to configure the DNS domain the phone belongs to, as well as the name servers needed for
DNS resolving.
3.3.6.1
DNS Domain Name
This is the name of the phone’s local domain.
Administration via WBM
Network > IP configuration
IP configuration
Disable DHCP
LLDP-MED Enabled
DHCP Enabled
IP address
Subnet mask
Default route
192.168.1.105
255.255.255.0
192.168.1.2
DNS domain
Primary DNS
Secondary DNS
192.168.1.105
192.168.1.2
Route 1 IP address
Route 1 gateway
Route 1 mask
Route 2 IP address
Route 2 gateway
Route 2 mask
VLAN discovery
VLAN ID
HTTP proxy
DHCP
Submit Reset
Administration via Local Phone
|
--Admin
|
--Network
|
--- IP configuration
|
--- DNS domain
60
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
IP Network Parameters
3.3.6.2
DNS Servers
If not provided by DHCP automatically, a primary and a secondary DNS server can be configured.
> Depending on the configuration chosen for survivability, DNS SRV is required. For details, please refer to Resilience and Survivability.
Data required
• Primary DNS : IP address of the primary DNS server.
• Secondary DNS : IP address of the secondary DNS server.
Administration via WBM
Network > IP configuration
Enter the IP addresses of the primary and the secondary DNS server. Afterwards, click Submit.
IP configuration
Disable DHCP
LLDP-MED Enabled
DHCP Enabled
IP address 192.168.1.105
Subnet mask
Default route
DNS domain
Primary DNS
Secondary DNS
255.255.255.0
192.168.1.2
192.168.1.105
192.168.1.2
Route 1 IP address
Route 1 gateway
Route 1 mask
Route 2 IP address
Route 2 gateway
Route 2 mask
VLAN discovery
VLAN ID
HTTP proxy
DHCP
Submit Reset
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 61
administration.fm
Administration
IP Network Parameters
Administration via Local Phone
|
---
Admin
|
---
Network
|
--- IP configuration
|
|--- Primary DNS
--- Secondary DNS
62
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
IP Network Parameters
3.3.6.3
Terminal Hostname
The phone’s hostname can be customised.
> DHCP and DNS must be appropriately connected and configured at the customer site.
The corresponding DNS domain is configured in Network > IP configuration > DNS domain
(see Section 3.3.6.1, “DNS Domain Name”).
The current DNS name of the phone is displayed at the right-hand side of the banner of the admin and user web pages, under DNS name. To see configuration changes, the web page must be reloaded.
> It is recommended to inform the user about the DNS name of the phone. The complete WBM address can be found under User menu > Network information >
Web address.
The DNS name can be constructed from pre-defined parameters and free text. Its composition is defined by the DNS name construction parameter. The following options are available:
• "None": No hostname is send to the DHCP server during DHCP configuration.
• "MAC based": The DNS name is built from the prefix "OIP" followed by the phone’s MAC address.
• "Web name": The DNS name is set to the the string entered in Web name.
• "Only number": The DNS name is set to the Terminal number, that is, the phone’s call number (E.164).
• "Prefix number": The DNS name is constructed from the the string entered in Web name, followed by the Terminal number.
Administration via WBM
System > System Identity
System Identity
3338 Terminal number
Web name
DNS name construction Only number
Submit Reset
Administration via Local Phone
|
--Administration
|
--Identity
|
|--- Web name
--- DDNS hostname
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 63
administration.fm
Administration
IP Network Parameters
3.3.7
Configuration & Update Service (DLS)
The OpenScape Deployment Service (DLS) is a OpenScape Management Application for administering workpoints in both HiPath and non-HiPath networks. Amongst the most important features are: security (e.g. PSS generation and distribution within an SRTP security domain), mobility for OpenScape phones, software deployment, plug&play support, as well as error and activity logging.
DLS address
, i.e. the IP address or hostname of the DLS server, and Default modeport, i.e. the port on which the DLS server is listening, are required to enable proper communication between phone and DLS. The Contact gap parameter controls a security function. It specifies a minimum time interval that must elapse between individual HTTP requests from the phone which are responding to a ContactMe request from the DLS. Any requests coming within that time will be ignored. The purpose is to prevent DoS (Denial of Service) attacks on the phone.
The Security mode determines whether the communication between the phone and the DLS is secure. A secure connection is established by exchanging credentials between the DLS and the phone for mutual authentication. After this, the communication is encrypted, and a different port is used.
Data required
•
DLS address
: IP address or hostname of the server on which the Deployment Service is running.
•
Default mode port
: Port on which the DLS Deployment Service is listening.
Default: 18443.
•
Contact gap
: Minimum time interval in seconds that must elapse between responses to a
ContactMe request from the DLS, in order to prevent DoS attacks.
Default: 300.
•
Mode
: Determines whether the communication between the phone and the DLS is secure.
Value range: "Default", "Secure".
Default: "Default".
Administration via WBM
Network > Update Service (DLS)
Update Service (DLS)
DLS address
Default mode port
Contact gap
Mode
Submit
18443
300
Default
Reset
64
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Administration via Local Phone
|
---
Admin
|
---
Network
|
---
Update Service (DLS)
|--- DLS address
|--- Default mode port
|
|--- Contact gap
--- Mode administration.fm
Administration
IP Network Parameters
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 65
administration.fm
Administration
IP Network Parameters
3.3.8
SNMP
The Simple Network Management Protocol is used by network management systems for monitoring network-attached devices for conditions that warrant administrative attention. An SNMP manager surveys and, if needed, configures several SNMP elements, e.g. VoIP phones.
OpenScape Desk Phone IP phones support SNMPv1.
There are currently 4 trap categories that can be sent by the phones:
Standard SNMP traps
OpenScape Desk Phone IP phones support the following types of standard SNMP traps, as defined in RFC 1157:
• coldStart : sent if the phone does a full restart.
• warmStart : sent if only the phone software is restarted.
• linkUp : sent when IP connectivity is restored.
QoS Related traps
These traps are designed specifically for receipt and interpretation by the QDC collection system. The traps are common to SIP phones, HFA phones, Gateways, etc.
Traps specific to OpenStage phones
Currently, the following traps are defined:
TraceEventFatal : sent if severe trace events occur; aimed at expert users.
TraceEventError : sent if severe trace events occur; aimed at expert users.
Data required
• Trap sending enabled : Enables or disables the sending of a TRAP message to the SNMP manager.
Value range: "Yes", "No"
Default: "No"
• Trap destination : IP address or hostname of the SNMP manager that receives traps.
• Trap destination port : Port on which the SNMP manager is receiving TRAP messages.
• Default: 162
• Trap community : SNMP community string for the SNMP manager receiving TRAP messages.
Default: "snmp"
• Queries allowed : Allows or disallows queries by the SNMP manager.
• Query password : Password for the execution of a query by the SNMP manager.
66
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
IP Network Parameters
• Diagnostic sending enabled : Enables or disables the sending of diagnostic data to the
SNMP manager.
Value range: "Yes", "No"
Default: "No"
• Diagnostic destination : IP address or hostname of the SNMP manager receiving diagnostic data.
• Diagnostic destination port : Port on which the SNMP manager is receiving diagnostic data.
• Diagnostic community : SNMP community string for the SNMP manager receiving diagnostic data.
• Diagnostic to generic destination : Enables or disables the sending of SNMP traps to a generic destination.
Value range: "Yes", "No"
Default: "No"
• QoS traps to QCU : Enables or disables the sending of TRAP messages to the QCU server.
Value range: "Yes", "No"
Default: "No"
• QCU address : IP address or hostname of the QCU server.
• QCU port : Port on which the QCU server is listening for messages.
Default: 12010.
• QCU community : QCU community string.
Default: "QOSCD".
• QoS to generic destination : Enables or disables the sending of QoS traps to a generic destination.
Value range: "Yes", "No"
Default: "No"
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 67
administration.fm
Administration
IP Network Parameters
Administration via WBM
System > SNMP
SNMP
Generic traps
Traping sending enabled
Trap destination
Trap destination port
Trap community
Queries allowed
Query password
Diagnostic traps
Diagnostic sending enabled
Diagnostic destination
Diagnostic destination port
Diagnostic community
Diagnostic to generic destination
QoS report traps
QoS traps to QCU
QCU address
QCU port
QCU community
QoS to generic destination
Submit
162
****
12010
*****
Reset
Administration via Local Phone
|
--Admin
|
--System
|
--SNMP
|--- Queries allowed
|--- Query password
|--- Traps enabled
|--- Manager address
|--- Manager port
|--- Community pwd
|--- Diag sending enabled
|--- Diag destination
|--- Diag destination port
|--- Diag community
|--- QoS traps to QCU
|--- QCU address
|--- QCU port
|
|--- QCU community
--- QoS to generic dest.
68
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
OpenScape Service Menu
3.4
OpenScape Service Menu
The phone’s local menu allows for controlling functions provided by the OpenScape system.
For this purpose, the phone must be logged on at the system. For information on the available functions, see the phone’s user manual.
Administration via Local Phone
|
---
Service Menu
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 69
administration.fm
Administration
System Settings
3.5
3.5.1
System Settings
System Identity
3.5.2
HFA Gateway Settings
To connect the OpenScape Desk Phone IP phone to the OpenScape System, the data described in the following are required.
The Gateway address is the IP address of the communication platform resp. HFA server.
The Gateway port is the port used by the HFA server for signaling messages. Usually, the default value "4060" is correct.
The Subscriber number is used as the internal extension number of the phone. It can be 1 to
24 characters long.
To log on to the HFA server, a subscriber password must be provided. A new subscriber pass- word can be entered by the administrator.
Data required :
• IP address : IP address of the communication platform resp. HFA server.
• Gateway ID : The HFA server’s port for signaling.
Default: "4060".
• Subscriber number : The phone’s extension.
• Password : Password for logging on to the HFA server.
Optionally, a Gateway ID can be provided. The Gateway ID refers to the PBX/Gateway/Gatekeeper to which the phone is connected. The value is the same as the "Globid" parameter in the OpenScape 4000 V7 resp. the "H.323 ID" in the OpenScape Business.
The System type is provided by the system the phone is connected to and therefore read-only.
Administration via WBM
System > Gateway
Gateway
System type
IP address
Gateway ID
Subscriber number
Password
Submit Reset
70
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
System Settings
Network > Port configuration
Port configuration
Gateway
Standby gateway
RTP base
System H.225
Standby H.225
System Cornet TLS
Standby Cornet TLS
System H.225 TLS
Standby H.225 TLS
Download server (default)
LDAP server
HTTP Proxy
LAN port speed
PC port speed
PC port mode
PC port autoMDIX
Automatic
Automatic disabled
Submit Reset
4060
4060
1300
1300
21
389
0
5004
1720
1720
4061
4061
Administration via Local Phone
|
--Admin
|
--System
|
--Gateway
|--- System type
|--- IP address
|--- Gateway ID
|
|--- Subscriber number
--- Password
|
--Admin
|
--Network
|
--Port configuration
|
--Number
|
--- Gatekeeper
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 71
administration.fm
Administration
System Settings
3.5.3
HFA Emergency Gateway Settings
For enabling survivability, the phone switches to a backup communications system in case the main system fails.
The settings are analog to those for the main system (see Section 3.5.2, “HFA Gateway Settings”).
Administration via WBM
System > Standby gateway
Standby Gateway
System type
IP address
Gateway ID
Subscriber number
Password
Submit Reset
Administration via Local Phone
|
--Admin
|
--System
|
--Standby gateway
|--- System type
|--- IP address
|--- Gateway ID
|
|--- Subscriber number
--- Password
|
---
Admin
|
---
Network
|
---
Port configuration
|
---
Number
|
--- Backup
72
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
System Settings
3.5.4
Server and Standby Server ports
In this section, the server ports for signalisation and speech data transfer are determined.
H.225.0 port determines the port used for non-secure H.225 signaling.
Default: 1720.
CorNet-TC TLS port determines the port used for secure communication by the HFA server.
H.225.0 TLS port determines the port used for secure H.225 signaling.
Administration via WBM
Port configuration
Gateway
Standby gateway
RTP base
System H.225
Standby H.225
System Cornet TLS
Standby Cornet TLS
System H.225 TLS
Standby H.225 TLS
Download server (default)
LDAP server
HTTP Proxy
LAN port speed
PC port speed
PC port mode
PC port autoMDIX
Automatic
Automatic disabled
Submit Reset
4060
4060
5004
1720
1720
4061
4061
1300
1300
21
389
0
Administration via Local Phone
|
---
Admin
|
---
Network
|
---
Port configuration
|---
Server port configuration
| |--- H.225.0 port
|
|
|
|
|--- TC TLS port
---
--- H.225.0 TLS port
Standby server port configuration
|--- H.225.0 port
|
|--- TC TLS port
--- H.225.0 TLS port
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 73
administration.fm
Administration
System Settings
3.5.5
Redundancy
This section controls the switching between main HFA server and standby HFA server.
If Small remote side redundancy is activated, the phone willl switch over to the standby HFA server in case the connection to the main server ist lost. By default, this is disabled.
When Auto switch back is activated, the phone will switch back to the main server as soon as the connection is re-established. By default, this is disabled.
Retry count main sets the number of trials to establish a connection to the main server before the phone switches over to the standby server. The default is 1.
The Timeout main parameter determines the time interval between the last try to get a connection to the main server and the establishing of a connection to the standby server. The default is 30.
Retry Count Standby: Sets the number of trials to establish a connection to the standby server before the phone switches back to the main server. The default is 3.
• Timeout Standby : Timeout between two "Retry count standby". The default is 30.
• Timeout main : Timeout between two "Retry count main" The default is 30.
• TC test retry : TC_Test retry determines the count of how many successfull TC_Tests the
Main system need to answer before the phone switches back, if Auto switchback is enabled. The default is 3.
• TC Test Expiry : Determines how long the Previous connection needs to timeout to actually trigger any further SRSR activities.
How much time to wait from one unsuccessfull Retry count main sequence until the next happens and in which interval the phone will send itself a TC_Test message (in idle mode).
The default is 30.
Lowering this value will significantly increase network load but the phone might detect failures faster but at an increased risk of false positive detections due to short time network outage.
After a change of the timeing values the SRSR need to be deactivated and re-activated again to take effect!
74
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Administration via WBM
Redundancy
Small remote site reduncancy
Auto switch back
Retry count main
Retry count standby
Timeout main
Timeout standby
TC test retry
TC test expiry
Submit Reset
Administration via Local Phone
|
--Admin
|
--System
|
--Redundancy
|--- Small remote site
|--- Auto switch back
|--- Retry count main
|--- Timeout main
|
|--- Retry count stdby
--- Timeout standby administration.fm
Administration
System Settings
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 75
administration.fm
Administration
System Settings
3.5.6
Emergency number
E.911 emergency number. This number establishes a connection to the PSAP (Publiy Safety
Answering Point). If a user dials this number, and an appropriate LIN (see Section 3.5.7, “LIN”)
is configured, the user’s location is communicated to the PSAP. In the USA, the number is 911.
Administration via WBM
Configuration
Emergency number
LIN
Not used timeout (minutes)
Submit Reset
2
Administration via Local Phone
|
---
Admin
|
---
System
|
---
Features
|
---
Configuration
|
---
General
|
--- Emergency number
3.5.7
LIN
The Location Identification Number is a number code which provides detailed geographic information about the phone, including e. g. the office room. On issuing an emergency call using
the E.911 emergency number (see Section 3.5.6, “Emergency number”), this code is trans-
ferred to an ALI (Automatic Location Information) system in the public network. When the ALI has looked up the location data in its database, it transmits the data along with the call to the
PSAP. The emergency operator is presented with the location data in readable form, so he can dispatch help as appropriate.
Administration via WBM
Configuration
Emergency number
LIN
Not used timeout (minutes)
Submit Reset
76
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
System Settings
Administration via Local Phone
|
---
Admin
|
---
System
|
---
Features
|
---
Configuration
|
---
General
|
--- LIN
3.5.8
Not Used Timeout
The timeout for the local user and admin menu is configurable. When the time interval is over, the menu is closed and the administrator/user is logged out.
The timeout may be helpful in case a user does a long press on a line key unintentionally, and thereby invokes the key configuration menu. The menu will close after the timeout, and the key will return to normal line key operation.
The timeout ranges from 1 to 5 five minutes. The default value is 2.
Administration via WBM
System > Features > Configuration
Configuration
Emergency number
LIN
Not used timeout (minutes)
Submit Reset
1
Administration via Local Phone
|
--Admin
|
--System
|
--Features
|
--Configuration
|
--General
|
--- Not used timeout
3.5.9
Feature access
The access to USB devices is configurable.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 77
administration.fm
Administration
System Settings
Administration via WBM
System > Features > Feature access
Feature access
Services
USB device access
Submit Reset
Administration via Local Phone
|
---
Admin
|
---
System
|
---
Features
|
---
Feature access
|
---
Services
|
--- USB device access
78
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
System Settings
3.5.10
Energy Saving (OpenScape Desk Phone IP 55G)
After the phone has been inactive within the timespan specified in Backlight time, the display backlight is switched off. The length of this timespan ranges from 1 minute, 5 minutes, 30 minutes, 60 minutes, 2 hours, 4 hours to 8 hours. The default value is 1 minute.
Administration via WBM
Local functions > Energy saving
Energy saving
Backlight time
Submit
2 hours
Reset
Administration via Local Phone
|
--Admin
|
--Local Functions
|
--Energy saving
|
--- Backlight time
3.5.11
Date and Time
To ensure that HFA security operates properly, the phone must obtain the correct date and time before logging on to the system. For this purpose, the phone must use the same SNTP server that is used by the system/PBX. If the DHCP server in your network provides the IP address of the SNTP server, no manual configuration is necessary. If not, you have to set the SNTP IP address parameter manually.
The date and time to be displayed can be obtained either from the SNTP server or from the system/PBX. To select SNTP-based date and time, set the Time source parameter to "SNTP".
The default value is "System".
For correct display of the current time, the Timezone offset must be set appropriately. This is the time offset from UTC (Coordinated Universal Time). If, for instance, the phone is located in
Munich, Germany, the offset is +1 (or simply 1); if it is located in Los Angeles, USA, the offset is -8. For countries or areas with half-our time zones, like South Australia or India, non-integer values can be used, for example 10.5 for South Australia (UTC +10:30).
If the phone is located in a country with daylight saving, the administrator can choose whether daylight saving time is activated manually or automatically. If Use daylight saving is enabled, and Auto time change is disabled, daylight saving time (DST) is in effect immediately. If Auto time change is enabled, daylight saving is controlled by the Time zone parameter. This selects the daylight saving time zone which is characterized by the start and end date for daylight saving time.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 79
administration.fm
Administration
System Settings
The Difference (minutes) provides the time difference for daylight saving time in minutes. This parameter is required also when Auto time change is enabled. In Germany, for instance, as in most countries, this is +60.
The Current DISPLAY Time is the date and time according to the timezone and daylight saving settings; this date and time is presented to the user. The Current UTC Time is the UTC time used by the phone and the system internally.
3.5.11.1
SNTP is Available, but no Automatic Configuration by DHCP Server
Data required
• SNTP IP address : IP address or hostname of the SNTP server.
• Timezone offset (hours) : Shift in hours corresponding to UTC.
• Daylight saving : Enables or disables daylight saving time in conjunction with Auto time change .
Value range: "Yes", "No".
• Difference (minutes) : Time difference when daylight saving time is in effect.
• Auto time change / Auto DST: Enables or disables automatic control of daylight saving time according to the DST zone.
Value range: "Yes", "No".
• DST zone : Area with common start and end date for daylight saving time.
Value range: "Australia 2007 (ACT, South Australia, Tasmania, Victoria)", "Australia 2007
(New South Wales)", "Australia (Western Australia)", "Australia 2008+ (ACT, New South
Wales, South Australia, Tasmania, Victoria)", "Brazil", "Canada", "Canada (Newfoundland)", "Europe (Portugal, United Kingdom)", "Europe (Finland)", "Europe (Rest)", "Mexico", "United States".
80
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Administration via WBM
Date and Time
Date and time
SNTP
SNTP IP address 192.43.244.18
Display and Trace time
Source SNTP
NOTE: When Display and Trace source is set to System the timezone and daylight savings settings below do not apply
Timezone and Daylight saving
Timezone offset (hours)
Use daylight saving
Difference (minutes)
Auto time change
Time zone Europe (Rest)
1
60
;
;
Current DISPLAY Time
Thu May 8 17:01:05 2014
Current UTC Time
Thu May 8 17:01:05 2014
Submit Reset
Administration via Local Phone
|
--Administration
|
--Date and Time
|--- SNTP IP address
|
--- Time source
|
|--- Timezone offset
--- Time source administration.fm
Administration
System Settings
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 81
administration.fm
Administration
System Settings
3.5.12
Security
3.5.12.1
System
OpenScape Desk Phone IP phones support two security options, which are mutually exclusive:
• H.235 Authentication and Encryption
• PKI-based SPE (Signaling and Payload Encryption)
The security settings are be configured separately for the main gateway and for the fallback gateway (standby) when using SRSR (Small Remote Site Redundancy).
Secure H.235 main/standby sets the stage of security for communication between phone and gatekeeper. When set to "None", there is no voice encryption. When set to "Partial", only the data sent from the phone to the gatekeeper is encrypted. With "Full", the data sent in both directions is encrypted.
The Time H.235 main/standby parameter defines a time window in milliseconds for the gateway. The gateway only accepts messages which arrive within this time window.
The Signalling transport main/standby parameter selects the protocol to use for signalling.
TCP and TLS are avaliable.
Certificate validation main/standby determines whether the phone certificate used for encrypted logon via TLS is checked against the certificate on the gateway.
> For further information on deploying SPE, please refer to the manual of the Open-
Scape system in use, and to the Deployment Service Administration manual.
Data required
•
Secure H.235 main
: Security stage for communication when the main gateway is in use.
Value range: "None", "Partial", "Full".
•
Secure H.235 standby
: Security stage for communication when the standby gateway is in use.
Value range: "None", "Partial", "Full".
•
Time H.235 main
: Time window length in ms when the main gateway is in use.
•
Time H.235 standby
: Time window length in ms when the main gateway is in use.
•
Signalling transport main
: Protocol to use for signalling when the main gateway is in use.
Value range: "TCP", "TLS".
•
Signalling transport standby
: Protocol to use for signalling when the standby gateway is in use.
Value range: "TCP", "TLS".
•
Certificate validation main
: Check the phone certificate against the gateway certificate when the main gateway is in use.
Value range: true, false.
82
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
System Settings
• Certificate validation standby : Check the phone certificate against the gateway certificate when the main gateway is in use.
Value range: true, false.
Administration via WBM
System > Security > System
System
Secure H.235 main
Secure H.235 standby
Time H.235 main
Time H.235 standby
Signalling transport main
Signalling transport standby
Certificate validation main
Certificate validation standby
None
None
240
240
TCP
TCP
Submit Reset
Administration via Local Phone
|
--Administration
|
--System
|
--Security
|
--System
|--- Secure H.235 main
|--- Secure H.235 stdby
|--- Time H.235 main
|--- Time H.235 stdby
|--- Signalling main
|--- Signalling stdby
|
|--- Certificate main
--- Certificate stdby
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 83
administration.fm
Administration
System Settings
3.5.12.2
Access control
Administration via WBM
System > Security > Access control
Access control
Factory reset claw
Serial port Unavailable
Submit Reset
Administration via Local Phone
|
---
Administration
|
---
System
|
---
Security
|
---
Access control
|
|--- Factory reset claw
--- Serial port
84
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Dialing
3.6
Dialing
3.6.1
Canonical Dialing Configuration
Call numbers taken from a directory application, LDAP for instance, are mostly expressed in canonical format. Moreover, call numbers entered into the local phone book are automatically converted and stored in canonical format, thereby adding "+", Local country code, Local na- tional code , and Local enterprise number as prefixes. If, for instance, the user enters the extension "1234", the local country code is "49", the local national code is "89", and the local enterprise number is "722", the resulting number in canonical format is "+49897221234".
For generating an appropiate dial string, a conversion from canonical format may be required.
The following parameters determine the local settings of the phone, like Local country code or Local national code, and define rules for converting from canonical format to the format required by the PBX.
> To enable the number conversion, all parameters not marked as optional must be
provided, and the canonical lookup settings must be configured (see Section 3.6.2,
Data required
•
Local country code
: E.164 Country code, e.g. "49" for Germany, "44" for United Kingdom.
Maximum length: 5.
•
National prefix digit
: Prefix for national connections, e.g. "0" in Germany and United Kingdom. Maximum length: 5.
•
Local national code
: Local area code or city code, e.g. "89" for Munich, "20" for London.
Maximum length: 6.
•
Minimal local number length
: Minimum number of digits in a local PSTN number, e.g.
3335333 = 7 digits.
•
Local enterprise node
: Number of the company/PBX wherein the phone is residing. Maximum length: 10. (Optional)
•
PSTN access code
: Access code used for dialing out from a PBX to a PSTN. Maximum length: 10. (Optional)
•
International access code
: International prefix used to dial to another country, e.g. "00" in Germany and United Kingdom. Maximum length: 5.
•
Operator codes
: List of extension numbers for a connection to the operator. The numbers entered here are not converted to canonical format. Maximum length: 50. (Optional)
•
Emergency numbers
: List of emergency numbers to be used for the phone. If there are more than one numbers, they must be separated by commas. The numbers entered here are not converted to canonical format. Maximum length: 50. (Optional)
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 85
administration.fm
Administration
Dialing
• Initial extension digits / Initial digits: List of initial digits of all possible extensions in the local enterprise network. When a call number could not be matched as a public network number, the phone checks if it is part of the local enterprise network. This is done by comparing the first digit of the call number to the value(s) given here. If it matches, the call number is recognized as a local enterprise number and processed accordingly.
If, for instance, the extensions 3000-5999 are configured in the OpenScape system, each number will start with 3, 4, or 5. Therefore, the digits to be entered are 3, 4, 5.
• Internal numbers
> To enable the phone to discern internal numbers from external numbers, it is
crucial that a canonical lookup table is provided (Section 3.6.2, “Canonical Dial
• "Local enterprise form": Any extension number is dialled in its simplest form. For an extension on the local enterprise node, the node ID is omitted. If the extension is on a different enterprise node, then the appropriate node ID is prefixed to the extension number. Numbers that do not correspond to an enterprise node extension are treated as external numbers.
• "Always add node": Numbers that correspond to an enterprise node extension are always prefixed with the node ID, even those on the local node. Numbers that do not correspond to an enterprise node extension are treated as external numbers.
• "Use external numbers": All numbers are dialled using the external number form.
• External numbers
• "Local public form": All external numbers are dialled in their simplest form. Thus a number in the local public network region does not have the region code prefix. Numbers in the same country but not in the local region are dialled as national numbers.
Numbers for a different country are dialled using the international format.
• "National public form": All numbers within the current country are dialled as national numbers, thus even local numbers will have a region code prefix (as dialling from a mobile). Numbers for a different country are dialled using the international format.
• "International form": All numbers are dialled using their full international number format.
• External access code
• "Not required": The access code to allow a public network number to be dialled is not required.
• "For external numbers": Default value. All public network numbers will be prefixed with the access code that allows a number a call to be routed outside the enterprise network. However, international numbers that use the + prefix will not be given access code.
86
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Dialing
• International gateway code :
• "Use national code": All international formatted numbers will be dialled explicitly by using the access code for the international gateway to replace the "+" prefix.
• "Leave as +": All international formatted numbers will be prefixed with "+".
Administration via WBM
Locality > Canonical dial settings
Canonical dial settings
Local country code
National prefix digit
Local national code
Minimum local number length
Local enterprise node
PSTN access code
International access code
Operator codes
Emergency numbers
Initial extension digits
Submit
1,2,3,4
Reset
723
0
00
49
0
89
4
Local functions > Locality > Canonical dial
Canonical dial
Internal numbers
External numbers
External access code
International gateway code
Submit
Local enterprise form
Local public form
Not required
Use national code
Reset
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 87
administration.fm
Administration
Dialing
Administration via Local Phone
|
---
Admin
|
---
Local Functions
|
---
Locality
|
---
Canonical settings
|--- Local country code
|--- National prefix digit
|--- Local national code
|--- Minimum local number length
|--- Local enterprise node
|--- PSTN access code
|--- International access code
|--- Operator code
|
|--- Emergency number
--- Initial extension digits
|
---
Admin
|
---
Local Functions
|
---
Locality
|
---
Canonical dial
|--- Internal numbers
|--- External numbers
|
|--- External access code
--- International access
88
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Dialing
3.6.2
Canonical Dial Lookup
The parameters given here are important for establishing outgoing calls and for recognizing incoming calls.
In the local phonebook, and, mostly, in LDAP directories, numbers are stored in canonical format. In order to generate an appropriate dial string according to the settings in Internal num- bers
and External numbers (-> Section 3.6.1), internal numbers must be discerned from ex-
ternal numbers. The canonical lookup table provides patterns which allow for operation.
Furthermore, these patterns enable the phone to identify callers from different local or international telephone networks by looking up the caller’s number in the phone book. As incoming numbers are not always in canonical format, their composition must be analyzed first. For this purpose, an incoming number is matched against one or more patterns consisting of country codes, national codes, and enterprise nodes. Then, the result of this operation is matched against the entries in the local phone book.
> To make sure that canonical dial lookup works properly, at least the following parameters of the phone must be provided:
• Local country code
• Local area code
• Local enterprise code
Up to 5 patterns can be defined. The Local code 1 ... 5 parameters define up to 5 different local enterprise nodes, whilst International code 1... 5 define up to 5 international codes, that is, fully qualified E.164 call numbers for use in a PSTN.
Data required
•
Local code 1 ... 5
: Local enterprise code for the node/PBX the phone is connected to.
Example: "7007" for Unify Munich.
•
International code 1 ... 5
: Sequence of "+", local country code, local area code, and local enterprise node corresponding to to one or more phone book entries.
Example: "+49897007" for Unify Munich.
Administration via WBM
Locality > Canonical dial lookup
Canonical dial lockup
Local code 1:
Local code 2:
Local code 3:
Local code 4:
Local code 5:
Submit
International code 1:
International code 2:
International code 3:
International code 4:
International code 5:
Reset
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 89
administration.fm
Administration
Dialing
Administration via Local Phone
|
---
Admin
|
---
Local Functions
|
---
Locality
|
---
Canonical lookup
|--- Local code 1
|--- International 1
|--- Local code 2
|--- International 2
|--- Local code 3
|--- International 3
|--- Local code 4
|--- International 4
|--- Local code 5
|
--- International 5
90
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Distinctive Ringing
3.7
Distinctive Ringing
The HFA server may provide information indicating a specific type of call within an incoming call. The phone can use this information to choose a ring tone according to the call type. A list of different ring types is maintained in the phone.
Any ringer sound may either be
• OpenScape specified tones
• Audio file (selected from the pool of ringer files on the phone)
• Constructed (from melody and tone sequence settings)
The ringer sounds are system controlled by default. The admin can set if the users are allowed to change their ringer sounds.
If the user is allowed (default setting), the user can decide to use either OpenScape system tones (default setting) or locally created sounds for each of the CorNet TS (Octet 12) ringer types; either constructed (8x3-seq/melody matrix) or ring tone file.
If the user setting is not allowed, the user cannot change ringer settings (except the ringer volume setting). Regardless of these setting, admin can set/change the ringer settings.
Once distinctive ringing is configured locally a system control of the ringer parameters is not possible. If system control of the ringer is desired the ringer mode must be set to “HiPath”.
Even though the ringers are configured locally the behaviour of the ringers should be the same as system controlled ones. In particular, cyclic ringers shall be played endlessly until the switch commands to stop playing (and therefore repeated if necessary), whereas single shot ringers should play for just a short period - the intention being to alert the phone user to a new state of the phone but not to hinder the ongoing conversation. This short period is defined to be 3 seconds. It should be possible to interrupt the playing of the cyclic ringer to play the single shot ringer and after timeout the cyclic ringing should resume. This behaviour is independent of whether low or high quality ringer files are played or whether the ringer is pattern generated.
The value in Octet 12 in the CorNet AU_RINGER_START message is used as an index into ringers configured on the phone. The indexed entry indicates the ringing to be used for the call.
In any cases if a distinctive ring is requested then the associated ring type is used instead of the default ringer. The ringing is played immediately when requested. If distinctive ringing is not requested or cannot be matched to a ringer then, the tone specified in the CorNet ringer message by the OpenScape system will be used to construct the ring tone.
Distinctive ringer naming
There is no configuration necessary to set the names. CorNet specifies the ringer types and enumerations. Please be aware that the naming refers to the call type as sent in the CorNet message, not to be confused with a feature or a call scenario. The mapping of calltype to feature or call scenario occurs in the system and this may be configurable (e.g. in HiPath 4000 by
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 91
administration.fm
Administration
Distinctive Ringing means of AMO ZAND). It is up to the administrator to configure such that the user hears the required ring tones for the various features/call scenarios. Also note that only the set of call types actually implemented by the system should be offered for configuration of the ringers.
Currently OpenScape Business only implements a subset of those in CorNet. It is assumed that this set is relatively stable.
Ringer setting and preview
The configuration of distinctive ringers overlaps considerably with the general ringer configuration feature and the ability to preview (manually and automatically) what a ringer sounds like.
Data required
• Name : Selects the call type to be used. In OpenScape 4000 V7, for “Speaker call” function the call type “Rollover call” is used in the CorNet AU_RINGER_START message.
Value range OpenScape 4000 V7: "Internal call", "External call", "Buzz call", "Rollover call",
"Alert (simple)", "Alert (multiple)", "Special #1", "Special #2", "Special #3", "Attention ringer", "Unspecified call", " US DSN precedence ring", "US DSN routine ring", "Emergency call"
Value range OpenScape Business: "Internal call", "External call", "Attention ringer"
Default: "Internal call".
• Ringer sound : ‘Pattern’ or the name of the selected ring tone file. Sets the distinctive ringer to use the currently set pattern (melody and sequence). This is the pattern that will be used if the configured ring tone file cannot be played for any reason.
Value range: "Pattern", "<audio file>"
Default: "Pattern".
• Pattern melody : Selects the melody pattern that will be used if Ringer sound is set to
"Pattern".
Value range: "1"... "8"
Default: "2".
• Pattern sequence: Determines the length for the melody pattern, and the interval between the repetitions of the pattern.
Value range: "1": 1 sec ON, 4 sec OFF
"2": 1 sec ON, 2 sec OFF
"3": 0.7 sec ON, 0.7 sec OFF, 0.7 sec ON, 3 sec OFF
Default: "2".
• User changeable : Selects if the user is allowed to change destinctive ringer settings.
Value range: "Yes", "No"
Default: "Yes".
• Mode : Determines the source of ringer tone.
Value range: "HiPath ", "Local ringer"
92
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Default: "HiPath".
Administration via WBM
OpenScape 4000 V7: Admin > Ringer > Local ringers
Local ringers
Name Ringer sound
Internal
Extermal
Buzz
Rollover
Simple alert
Multiple alert
Special 1
Special 2
Special 3
Attention
Unspecified
US DSN-Precedence
US DSN-Routine
Emergency
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
Submit
Pattern melody Pattern sequence
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Reset
2
2
2
2
2
2
2
2
2
2
2
2
2
2
OpenScape Business: Admin > Ringer > Local ringers
Local ringers
Name
Internal
External
Attention
Ringer sound
Pattern
Pattern
Pattern
Submit
2
2
2
Pattern melody Pattern sequence
2
2
2
Reset administration.fm
Administration
Distinctive Ringing
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 93
administration.fm
Administration
Distinctive Ringing
Admin > Ringer >Ringer setting
Ringer setting
User Changeable
Ringer Mode
Submit
;
Local ringer
Reset
Administration via Local Phone
|
---
Admin
|
---
Settings
|
---
Ringer
|---
Local ringer
| |--- Name
| |--- Ringer sound
|
|
|
|
|--- Ringer melody
--- Ringer sequence
---
Ringer Setting
|--- Options
|--- User changeable
|
--- Mode
94
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
User Mobility
3.8
User Mobility
If user mobility is enabled, the user can log on at another phone and at the same time transfer the user data (only possible in case of DPIP55G Data Mobility). The transferable user data comprises the following:
• the user’s phone book, including call groups;
• the picture clips associated with phone book entries;
•
the canonical settings (see Section 3.5.11, “Date and Time”);
• the call log;
• the user password.
> For user data mobility, the DLS (Deployment Service) must be available.
The Set Mobility Mode parameter controls the phone’s mobility features, i. e. it adjusts the mobility level. The following settings are possible:
• Basic (Default): This is the original behaviour before the introduction of data mobility in
V1R3. When a new user logs on at the phone, all user data of the precedent user will be shown.
• Data Privacy : When a new user logs on at the phone, a pristine, empty phone book and call log will be provided. The user data of the precedent user will be hidden to the new user.
• Data Mobility : The user data of phone A, i. e. the user’s home phone, is sent to the DLS, which acts as a cache for mobility purposes. The local phone book, the picture clips, the canonical settings, and the user password are updated each time a change is made. The call log is sent to the DLS every hour and when the user logs off. As soon as the user logs on to phone B, the data is transferred to phone B. Please note that user data mobility must be activated both on phone A and B.
> In case a user wants to move from an OpenScape Desk Phone IP to an optiPoint phone, DLS-based data mobility is not possible.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 95
administration.fm
Administration
User Mobility
3.8.1
Platform Specific Behaviour
Regarding data mobility, there are some differences, dependening on whether a OpenScape
Business or OpenScape 4000 V7 is in use.
OpenScape 4000 V7
When the user logs on to phone B, phone A is in "cancel mobility" state. This means that the user, or someone else, can trigger a restore of the initial user at phone A. Thus, the user will be logged off from phone B and logged on at phone A. To prevent an unauthorized person from doing this, the cancel mobility process can be password-protected. This password is entered in the Cancel mobility password menu.
OpenScape Business
With this platform, mobility is achieved by storing all user data in the DLS. Hence, for each participant who wishes to use data mobility, a mobile user must be created on the DLS. For details, please refer to the Deployment Service Administration Manual.
Logon attempts : Tries of unsuccessfull Logon attempts before the phone switches back from the Mobile user to Non Mobile user after the connection to the gateway failed.
96
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Admin > User Mobility > Set Mobility Mode
OpenScape Desk Phone IP 55G
Set Mobility Mode
Mobility Type
Logon attempts
Submit
Data Mobility
1
Reset
OpenScape Desk Phone IP 35G
Set Mobility Mode
Logon attempts
Submit Reset
1
Admin > User Mobility > Cancel mobility password
Cancel Mobility password
New password
Confirm password
Submit Reset
Administration via Local Phone
|
---
Admin
|
---
Mobility
|--- Mobility Mode
|--- Logon attempts
|
|--- Mobility password
--- Confirm password administration.fm
Administration
User Mobility
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 97
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9
Transferring Phone Software, Application, and Media Files
New software images, hold music, picture clips for phonebook entries, LDAP templates, company logos, screensaver images, and ring tones can be uploaded to the phone via DLS (Deployment Service) or WBM (Web Based Management).
> For all user data, which includes files as well as phonebook content, the following amounts of storage place are available:
• OpenScape Desk Phone IP 35G: 4 MB
• OpenScape Desk Phone IP 55G: 8 MB
3.9.1
FTP/HTTPS Server
There are no specific requirements regarding the FTP server for transferring files to the Open-
Scape Desk Phone IP. Any FTP server providing standard functionality will do.
3.9.2
Common FTP/HTTPS Settings (Defaults)
For each one of the various file types, e.g. phone software, or logos, specific FTP/HTTPS access data can be defined. If some or all file types have the parameters Download method,
FTP Server
, FTP Server port, FTP Account, FTP Username, FTP path, and HTTPS base
URL
in common, they can be specified here. These settings will be used for a specific file type if its Use defaults parameter is set to "Yes".
> If Use defaults is activated for a specific file type, any specific settings for this file type are overridden by the defaults.
Data required
• Download method : Selects the protocol to be used.
Value range: "FTP", "HTTPS".
Default: "FTP".
• FTP Server : IP address or hostname of the FTP server in use.
• FTP Server port : Port number of the FTP server in use. For HTTPS, port 443 is assumed, unless a different port is specified in the HTTPS base URL.
Default: 21.
• FTP Account : Account at the server (if applicable).
• FTP Username : User name for accessing the server.
• FTP Password : Password corresponding to the user name.
• FTP path : Path of the directory containing the files.
• HTTPS base URL : IP address or hostname of the HTTPS server in use. If no port number is specified here, port 443 is used. Only applicable if Download method is switched to
"HTTPS".
98
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Administration via WBM
File transfer > Defaults
Defaults
Download method
FTP Server address
FTP Server port
FTP account
FTP username
FTP password
FTP path
HTTPS base URL
Submit
FTP
21
Reset
Administration via Local Phone
|
--Admin
|
--File Transfer
|
--Defaults
|--- Download method
|--- Server
|--- Port
|--- Account
|--- Username
|--- Password
|
|--- FTP path
--- HTTPS base URL administration.fm
Administration
Transferring Phone Software, Application, and Media Files
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 99
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.3
Phone Application
The firmware for the phone can be updated by downloading a new software file to the phone.
If an incorrect software image is being attempted to be loaded onto the phone, the phone will reject the request and return to normal operation without reboot. As part of this security mechanism, new software binds are identified by a "Supported Hardware Level" information built into the header.
Prerequisite: The phone knows it’s own hardware level (from the part number and/or by a dynamical check of its HW level).
When a new software bind is downloaded to the phone, the following verifcation is performed:
1. If new software bind has hardware level header included (in the bind header): Hardware level of new bind is compared with phone’s hardware level.
• If compatible (or if Override is set): Proceed with update
• If NOT compatible: Abandon update and return to original application
2. If new software bind does NOT have hardware level header included (in the bind header):
Software version of new bind is compared with minimum known supported SW level.
• If compatible (or if Override is set): Proceed with update
• If NOT compatible: Abandon update and return to original application
7
Do not disconnect the phone from the LAN or power unit during software update. An active update process is indicated by blinking LEDs and/or in the display.
3.9.3.1
FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.9.2, “Common FTP/HTTPS Settings
(Defaults)”) are to be used, Use defaults must be set to "Yes", and only the Filename must be
specified.
Data required (in every case)
•
Use defaults
: Specifies whether the default FTP/HTTPS access settings shall be used.
Value range: "Yes", "No".
•
Filename
: Specifies the file name of the phone software.
Data required (if not derived from Defaults)
•
Download method
: Selects the protocol to be used.
Value range: "FTP", "HTTPS".
Default: "FTP".
100
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
• Server : IP address or hostname of the FTP/HTTPS server in use.
• Server port : Port number of the FTP/HTTPS server in use.
Default: 21.
• Account : Account at the server (if applicable).
• Username : User name for accessing the server.
• Password : Password corresponding to the user name.
• FTP path : Path of the directory containing the files.
• HTTPS base URL : IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to "HTTPS".
• After submit : Specifies actions after submit button is pressed.
Value range: "do nothing", "start download".
Default: "do nothing".
Administration via WBM
File transfer > Phone application
Phone application
Use defaults
Download method FTP
FTP Server address
FTP Server port
FTP account
FTP username
21
FTP password
FTP path
HTTPS base URL
Filename
After submit do nothing
Submit Reset
Administration via Local Phone
|
--Admin
|
--File Transfer
|
--Phone app
|--- Use default
|--- Download method
|--- Server
|--- Port
|--- Account
|--- Username
|--- Password
|--- FTP path
|
|--- HTTPS base URL
--- Filename
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 101
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.3.2
Download/Update Phone Application
If applicable, phone software should be deployed using the Deployment Service (DLS) . Alternatively, the download can be triggered from the WBM interface or from the Local phone menu.
When the download has been successful, the phone will restart and boot up using the new software.
> When Phone Application was upgraded to HFA V3R0 there may be displayed a downgrade protection message.
Downgrade of DPIP phones is protected to avoid download of software lower than
HFA V3R0 due to License Restrictions.
Start Download via WBM
File transfer > Phone application
Phone application
Use defaults
Download method FTP
FTP Server address
FTP Server port
FTP account
FTP username
21
FTP password
FTP path
HTTPS base URL
Filename
After submit do nothing
Submit Reset
In the File transfer > Phone application dialog, set After submit to "start download" and press the Submit button.
Start Download via Local Phone
In the administration menu, set the focus to Phone app.
|
--Admin
|
--File Transfer
|
--- Phone app
• On Desk Phone IP 35G:
Press the OK key. A context menu opens. In the context menu, select Download. The download will start immediately.
• On Desk Phone IP 55G:
Press the Soft Key labeled Download. The download will start immediately.
102
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.4
Picture Clips
> Picture clips are available only on OpenScape Desk Phone IP 55G phones.
> The file size for a picture clip is limited to 300 KB.
Picture Clips are small images used for displaying a picture of a person that is calling on a line.
The supported file formats for picture clips are JPEG and PNG.
3.9.4.1
FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.9.2, “Common FTP/HTTPS Settings
(Defaults)”) are to be used, Use default must be set to "Yes", and only the Filename must be
specified.
Data required (in any case)
• Use default : Specifies whether the default FTP/HTTPS access settings shall be used.
Value range: "Yes", "No".
• Filename : Specifies the file name of the image file.
• Download method : Selects the protocol to be used.
Value range: "FTP", "HTTPS".
Default: "FTP".
• Server : IP address or hostname of the FTP/HTTPS server in use.
• Server port : Port number of the FTP/HTTPS server in use.
Default: 21.
• Account : Account at the server (if applicable).
• Username : User name for accessing the server.
• Password : Password corresponding to the user name.
• FTP path : Path of the directory containing the files.
• HTTPS base URL : IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to "HTTPS".
• After submit : Specifies actions after submit button is pressed.
Value range: "do nothing", "start download".
Default: "do nothing".
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 103
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
Administration via WBM
File transfer > Picture clip
Picture clip
Use defaults
Download method
FTP Server address
FTP Server port
FTP account
FTP username
FTP
21
FTP password
FTP path
HTTPS base URL
Filename
After submit do nothing
Submit Reset
Administration via Local Phone
|
--Admin
|
--File Transfer
|
--Picture Clip
|--- Use default
|--- Download method
|--- Server
|--- Port
|--- Account
|--- Username
|--- Password
|--- FTP path
|
|--- HTTPS base URL
--- Filename
• On Desk Phone IP 55G:
Press the Soft Key labeled Download. The download will start immediately.
104
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.4.2
Download Picture Clip
If applicable, picture clips should be deployed using the Deployment Service (DLS) . Alternatively, the download can be triggered from the web interface or from the local phone menu.
Start Download via WBM
File transfer > Phone application
Picture clip
Use defaults
Download method
FTP Server address
FTP Server port
FTP account
FTP username
FTP
21
FTP password
FTP path
HTTPS base URL
Filename
After submit start download
Submit Reset
In the File transfer > Picture clip dialog, set After submit to "start download" and press the
Submit button.
Start Download via Local Phone
In the administration menu, set the focus to Picture clip.
|
--Admin
|
--File Transfer
|
--- Picture clip
• On Desk Phone IP 55G:
Press the Soft Key labeled Download. The download will start immediately.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 105
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.5
LDAP Template
The LDAP template is an ASCII text file that uses an allocation list to assign directory server attributes to input and output fields on an LDAP client. The LDAP template must be modified correctly for successful communication between the directory server and the LDAP client.
> The OpenScape Desk Phone IP phones support LDAPv3.
3.9.5.1
FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.9.2, “Common FTP/HTTPS Settings
(Defaults)”) are to be used, Use default must be set to "Yes", and only the Filename must be
specified.
Data required (in any case)
• Use default : Specifies whether the default FTP/HTTPS access settings shall be used.
Value range: "Yes", "No"
Default: "No"
• Filename : Specifies the file name of the phone software.
• After submit : Specifies actions after submit button is pressed.
Value range: "do nothing", "start download".
Default: "do nothing".
Data required (if not derived from Defaults)
• Download method : Selects the protocol to be used.
Value range: "FTP", "HTTPS"
Default: "FTP"
• Server address : IP address or hostname of the FTP/HTTPS server in use.
• Server port : Port number of the FTP/HTTPS server in use.
Default: 21
• Account : Account at the server (if applicable).
• Username : User name for accessing the server.
• Password : Password corresponding to the user name.
• FTP path : Path of the directory containing the files.
• HTTPS base URL : IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to "HTTPS".
106
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Administration via WBM
File transfer > LDAP
LDAP
Use defaults
Download method
FTP Server address
FTP Server port
FTP account
FTP username
FTP
21
FTP password
FTP path
HTTPS base URL
Filename
After submit do nothing
Submit Reset
Administration via Local Phone
|
--Admin
|
--File Transfer
|
--LDAP
|--- Use default
|--- Download method
|--- Server
|--- Port
|--- Account
|--- Username
|--- Password
|--- FTP path
|
|--- HTTPS base URL
--- Filename administration.fm
Administration
Transferring Phone Software, Application, and Media Files
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 107
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.5.2
Download LDAP Template
If applicable, LDAP templates should be deployed using the DLS (Deployment Service). Alternatively, the download can be triggered from the web interface or from the Local phone menu.
> The OpenScape Desk Phone IP phone supports LDAPv3.
Start Download via WBM
LDAP
Use defaults
Download method
FTP Server address
FTP Server port
FTP account
FTP
192.168.1.150
21
FTP username
FTP password phone
FTP path
HTTPS base URL media
Filename Idap_template.txt
After submit
Submit start download
Reset
In the File transfer > LDAP dialog, set After submit to "start download" and press the Submit button.
Start Download via Local Phone
In the administration menu, set the focus to LDAP.
|
--Admin
|
--File Transfer
|
--- LDAP
• On Desk Phone IP 35G:
Press the OK key. A context menu opens. In the context menu, select Download. The download will start immediately.
• On Desk Phone IP 55G:
Press the Soft Key labeled Download. The download will start immediately.
108
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.6
Logo
On OpenScape Desk Phone IP 55G, a custom background image for the telephony interface can be supplied. In most cases, this will be the company logo.
On OpenScape Desk Phone IP 55G, the supported file formats are JPEG and PNG. The ideal size values are is as follows:
• Width: 240 px
• Height: 70 px
If the size should deviate from these values, the image will appear skewed.
3.9.6.1
FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.9.2, “Common FTP/HTTPS Settings
(Defaults)”) are to be used, Use default must be set to "Yes", and only the Filename must be
specified.
Data required (in any case)
• Use default : Specifies whether the default FTP/HTTPS access settings shall be used.
Value range: "Yes", "No"
Default: "No"
• Filename : Specifies the file name of the phone software.
• After submit : Specifies actions after submit button is pressed.
Value range: "do nothing", "start download".
Default: "do nothing".
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 109
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
Data required (if not derived from Defaults)
• Download method : Selects the protocol to be used.
Value range: "FTP", "HTTPS"
Default: "FTP"
• Server address : IP address or hostname of the FTP/HTTPS server in use.
• Server port : Port number of the FTP/HTTPS server in use.
Default: 21
• Account : Account at the server (if applicable).
• Username : User name for accessing the server.
• Password : Password corresponding to the user name.
• FTP path : Path of the directory containing the files.
• HTTPS base URL : IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to "HTTPS".
Administration via WBM
File transfer > Logo
Logo
Use defaults
Download method
FTP Server address
FTP Server port
FTP account
FTP
21
FTP username
FTP password
FTP path
HTTPS base URL
Filename
After submit do nothing
Submit Reset
Administration via Local Phone
|
---
Admin
|
---
File Transfer
|
---
Logo
|--- Use default
|--- Download method
|--- Server
|--- Port
|--- Account
|--- Username
|--- Password
|--- FTP path
|
|--- HTTPS base URL
--- Filename
110
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.6.2
Download Logo
If applicable, logos should be deployed using the DLS (Deployment Service). Alternatively, the download can be triggered from the web interface or from the Local phone menu.
Start Download via WBM
Logo
Use defaults
Download method
FTP Server address
FTP Server port
FTP account
FTP username
FTP
192.168.1.150
21 phone
FTP password
FTP path media
HTTPS base URL
Filename company_logo.png
After submit
Submit start download
Reset
In the File transfer > Logo dialog, set After submit to "start download" and press the Submit button.
Start Download via Local Phone
In the administration menu, set the focus to Logo.
|
--Admin
|
--File Transfer
|
--- Logo
• On Desk Phone IP 55G:
Press the Soft Key labeled Download. The download will start immediately.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 111
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.7
Screensaver
The screensaver is displayed when the phone is in idle mode. It performs a slide show consisting of images which can be uploaded using the web interface.
> Screensavers are available only on OpenScape Desk Phone IP 55G.
> The file size for a screensaver image is limited to 300 KB. If the file is too large or the contents of the file are not valid, the file will not be stored in the phone.
For screensaver images, the following specifications are valid:
• Data format: JPG or PNG. JPG is recommended.
• Screen format: 4:3. The images are resized to fit in the screen, so that images with a width/ height ratio differing from 4:3 will appear with deviant proportions.
• Resolution: The phone’s screen resolution is the best choice for image resolution:
– OpenScape Desk Phone IP 55G: 320x240
3.9.7.1
FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.9.2, “Common FTP/HTTPS Settings
(Defaults)”) are to be used, Use default must be set to "Yes", and only the Filename must be
specified.
Data required (in any case)
• Use default : Specifies whether the default FTP/HTTPS access settings shall be used.
Value range: "Yes", "No"
Default: "No"
• Filename : Specifies the file name of the phone software.
• After submit : Specifies actions after submit button is pressed.
Value range: "do nothing", "start download".
Default: "do nothing".
Data required (if not derived from Defaults)
• Download method : Selects the protocol to be used.
Value range: "FTP", "HTTPS"
Default: "FTP"
• Server address : IP address or hostname of the FTP/HTTPS server in use.
• Server port : Port number of the FTP/HTTPS server in use.
Default: 21
112
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
• Account : Account at the server (if applicable).
• Username : User name for accessing the server.
• Password : Password corresponding to the user name.
• FTP path : Path of the directory containing the files.
• HTTPS base URL : IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to "HTTPS".
Administration via WBM
File transfer > Screensaver
Screensaver
Use defaults
Download method FTP
FTP Server address
FTP Server port
FTP account
FTP username
21
FTP password
FTP path
HTTPS base URL
Filename
After submit do nothing
Submit Reset
Administration via Local Phone
|
--Admin
|
--File Transfer
|
--Screensaver
|--- Use default
|--- Download method
|--- Server
|--- Port
|--- Account
|--- Username
|--- Password
|--- FTP path
|
|--- HTTPS base URL
--- Filename
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 113
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.7.2
Download Screensaver
If applicable, screensavers should be deployed using the DLS (Deployment Service). Alternatively, the download can be triggered from the web interface or from the Local phone menu.
Start Download via WBM
Screensaver
Use defaults
Download method
FTP Server address
FTP Server port
FTP
192.168.1.150
21
FTP account
FTP username phone
FTP password
FTP path media
HTTPS base URL
Filename seaside.jpg
After submit start download
Submit Reset
In the File transfer > Screensaver dialog, set After submit to "start download" and press the
Submit
button.
Start Download via Local Phone
In the administration menu, set the focus to Screensaver.
|
---
Admin
|
---
File Transfer
|
--- Screensaver
• On Desk Phone IP 55G:
Press the Soft Key labeled Download. The download will start immediately.
114
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.8
Ringer File
> The download of ringer files via WBM or local menu is possible only for OpenScape
Desk Phone IP 55G.
Custom ring tones can be uploaded to the phone.
> The file size for a ringer file is limited to 1 MB. If the file is too large or the contents of the file are not valid, the file will not be stored in the phone. This limitation is only enforced on WBM. If a ringer file is downloaded via OpenStage Manager, this restriction does not apply.
The following file formats are supported:
• WAV format. The recommended specifications are:
– Audio format: PCM
– Bitrate: 16 kB/sec
– Sampling rate: 8 kHz
– Quantization level: 16 bit
• MIDI format.
• MP3 format (OpenScape Desk Phone IP 55G only). The OpenScape Desk Phone IP 55G phones are able to play MP3 files from 32 kbit/s up to 320 kbit/s. As the memory for user data is limited to 8 MB, a constant bitrate of 48 kbit/sec to 112 kbit/s and a length of max.
1 minute is recommended. Although the phone software can play stereo files, mono files are recommended, as the phone has only 1 loudspeaker.
See the following table for estimated file size (mono files):
Length
0:15 min
0:30 min
0:45 min
1:00 min
64 kbit/s
0,12 MB
0,23 MB
0,35 MB
0,47 MB
80 kbit/s
0,15 MB
0,29 MB
0,44 MB
0,59 MB
96 kbit/s
0,18 MB
0,35 MB
0,53 MB
0,70 MB
112 kbit/s
0,21 MB
0,41 MB
0,62 MB
0,82 MB
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 115
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.8.1
FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.9.2, “Common FTP/HTTPS Settings
(Defaults)”) are to be used, Use default must be set to "Yes", and only the Filename must be
specified.
Data required (in any case)
• Use default : Specifies whether the default FTP/HTTPS access settings shall be used.
Value range: "Yes", "No"
Default: "No"
• Filename : Specifies the file name of the phone software.
• After submit : Specifies action after submit button is pressed.
Value range: "do nothing", "start download".
Default: "do nothing".
Data required (if not derived from Defaults)
• Download method : Selects the protocol to be used.
Value range: "FTP", "HTTPS"
Default: "FTP"
• Server address : IP address or hostname of the FTP/HTTPS server in use.
• Server port : Port number of the FTP/HTTPS server in use.
Default: 21
• Account : Account at the server (if applicable).
• Username : User name for accessing the server.
• Password : Password corresponding to the user name.
• FTP path : Path of the directory containing the files.
• HTTPS base URL : IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to "HTTPS".
116
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Administration via WBM
File transfer > Ringer file
Ringer file
Use defaults
Download method
FTP Server address
FTP Server port
FTP account
FTP username
FTP
21
FTP password
FTP path
HTTPS base URL
Filename
After submit do nothing
Submit Reset
Administration via Local Phone
|
--Admin
|
--File Transfer
|
--Ringer
|--- Use default
|--- Download method
|--- Server
|--- Port
|--- Account
|--- Username
|--- Password
|--- FTP path
|
|--- HTTPS base URL
--- Filename administration.fm
Administration
Transferring Phone Software, Application, and Media Files
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 117
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.8.2
Download Ringer File
If applicable, ring tone files should be deployed using the DLS (Deployment Service). Alternatively, the download can be triggered from the web interface or from the Local phone menu.
Start Download via WBM
Ringer file
Use defaults
Download method
FTP Server address
FTP Server port
FTP account
FTP
192.168.1.150
21
FTP username
FTP password phone
FTP path
HTTPS base URL media
Filename ring.mp3
After submit start download
Submit Reset
In the File transfer > Ringer dialog, set After submit to "start download" and press the Submit button.
Start Download via Local Phone
In the administration menu, set the focus to Ringer.
|
--Admin
|
--File Transfer
|
--- Ringer
• On Desk Phone IP 55G:
Press the Soft Key labeled Download. The download will start immediately.
118
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.9
Dongle Key
The HPT dongle key is a special file that contains a secret hash number which is required to connect the HPT tool to the phone. This testing tool is used exclusively by the service staff.
3.9.9.1
FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.9.2, “Common FTP/HTTPS Settings
(Defaults)”) are to be used, Use default must be set to „Yes“, and only the Filename must be
specified.
Data required (in any case)
• Use default : Specifies whether the default FTP/HTTPS access settings shall be used.
Value range: „Yes“, „No“
Default: „No“
• Filename : Specifies the file name of the phone software.
• After submit : Specifies actions after submit button is pressed.
Value range: "do nothing", "start download".
Default: "do nothing".
Data required (if not derived from Defaults)
• Download method : Selects the protocol to be used.
Value range: „FTP“, „HTTPS“
Default: „FTP“
• Server address : IP address or hostname of the FTP/HTTPS server in use.
• Server port : Port number of the FTP/HTTPS server in use.
Default: 21
• Account : Account at the server (if applicable).
• Username : User name for accessing the server.
• Password : Password corresponding to the user name.
• FTP path : Path of the directory containing the files.
• HTTPS base URL : IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to „HTTPS“.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 119
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
Administration via WBM
File transfer > Dongle key
Dongle key
Use defaults
Download method
FTP Server address
FTP Server port
FTP account
FTP username
FTP
21
FTP password
FTP path
HTTPS base URL
Filename
After submit do nothing
Submit Reset
Administration via Local Phone
|
---
Admin
|
---
File Transfer
|
---
Dongle key
|--- Use default
|--- Download method
|--- Server
|--- Port
|--- Account
|--- Username
|--- Password
|--- FTP path
|
|--- HTTPS base URL
--- Filename
120
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Transferring Phone Software, Application, and Media Files
3.9.9.2
Download Dongle Key File
If applicable, dongle key files should be deployed using the DLS (Deployment Service). Alternatively, the download can be triggered from the web interface or from the Local phone menu.
Start Download via WBM
Dongle key
Use defaults
Download method
FTP Server address
FTP Server port
FTP account
FTP
192.168.1.150
21
FTP username
FTP password phone
FTP path
HTTPS base URL media
Filename dongle
After submit start download
Submit Reset
In the File transfer > Dongle key dialog, set After submit to „start download“ and press the
Submit button.
Start Download via Local Phone
In the administration menu, set the focus to Dongle key.
|
--Admin
|
--File Transfer
|
--- Dongle key
• On Desk Phone IP 35G:
Press the OK key. A context menu opens. In the context menu, select Download. The download will start immediately.
• On Desk Phone IP 55G:
Press the Soft Key labeled Download. The download will start immediately.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 121
administration.fm
Administration
Corporate Phonebook: Directory Settings
3.10
Corporate Phonebook: Directory Settings
3.10.1
LDAP
The Lightweight Directory Access Protocol enables access to a directory server via an LDAP client. Various personal information is stored there, e.g. the name, organization, and contact data of persons working in an organization. When the LDAP client has found a person’s data, e. g. by looking up the surname, the user can call this person directly using the displayed number.
> The OpenScape Desk Phone IP phones support LDAPv3.
For connecting the phone’s LDAP client to an LDAP server, the required access data must be configured. The parameter Server address specifies the IP address of the LDAP server. The parameter Transport defines whether the phone has to continue to use an unencrypted TCP connection to the LDAP server, or to use an encrypted TLS connection to a separate LDAPS port on the LDAP server. If the Authentication is not set to "Anonymous", the user must authenticate himself with the server by providing a User name and a corresponding Password.
The user name and password are defined by the administrator. The user name is the string in the LDAP bind request, e. g. "C=GB,O=SIEMENS COMM,OU=COM,L=NTH,CN=BAYLIS
MICHAEL". The internal structure will depend on the specific corporate directory.
For a quick guide on setting up LDAP on an OpenStage phone, please refer to Section 4.3,
“How to Set Up the Corporate Phonebook (LDAP)”.
A search field for LDAP requests is supported. The search string is submitted to the LDAP server as soon as the OK key is pressed or when the Search trigger timeout expires.
Data required
• Server address : IP address or hostname of the LDAP server.
• Server port : Port on which the LDAP server is listening for requests.
Default: 389
• Authentication : Authentication method used for connecting to the LDAP server.
Value range: "Anonymous", "Simple"
Default: "Anonymous"
• User name : User name used for authentication with the LDAP server in the LDAP bind request.
• Password : Password used for authentication with the LDAP server.
• Search trigger timeout : Timespan between entering the last character and search string submission to the LDAP server.
122
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Administration via WBM
Local functions > LDAP Settings
LDAP Settings
LDAP Server address
LDAP Server port
Authentication
User Name
Password
Search trigger timeout
Submit
389
Anonymous
Reset
3
Administration via Local Phone
|
--Admin
|
--Local Functions
|
--LDAP
|--- Server address
|--- LDAP server port
|--- Authenticate
|--- User name
|
|--- Password
--- Search trigger (s) administration.fm
Administration
Corporate Phonebook: Directory Settings
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 123
administration.fm
Administration
Corporate Phonebook: Directory Settings
3.10.2
Picture via LDAP
In order to display centrally stored contact data the OpenScape Desk Phone IP 55G will request and retrieve the data from a server.
The OpenScape Desk Phone IP 55G HFA uses the services of an intermediate service located on OpenScape 4000 V7 Softgate via https messages. The Softgate lookup service then contacts the directory server via LDAP and queries for the name and picture corresponding to the requested phone number.
The OpenScape Desk Phone IP 55G requests the lookup for all numbers for which the local phonebook does not have a picture. In case the phonebook contains names for the number but without picture the name and picture from the directory server are displayed. If there is no entry for the number in the directory server the name from the local phonebook is displayed, so the directory server data overrides the local phonebook.
Currently two different mechanisms for storage of the picture shall be supported, both requiring a directory server for central storage:
• Direct retrieval of pictures stored within the ldap directory (preferred mechanism)
• Indirect (two step) retrieval in case the directory server contains a reference (url) to the picture instead – in this case the picture is retrieved from another server via http using the url.
The phones will only accept pictures encoded in jpg and max. 50K size.
124
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Corporate Phonebook: Directory Settings
3.10.2.1
"Softgate V6"settings for central access to subscriber pictures
Required input
• The url (including protocol and port) to reach the directory server LDAP account
• Password
• Node under which to search for contact data
• Key under which the mobile number is stored
• Key under which the regular telephone number is stored
• Key under which a further telephone number is stored
• Key under which the picture is stored
• Url prefix of location to fetch picture from (indirect mode, may be empty in case of direct mode)
• Key under which the first name(s) is/are stored
• Key under which the last name is stored
• Url suffix of location to fetch picture from (indirect mode, may be empty in case of direct mode)
For further information please refer to "Softgate V6" documentation
3.10.2.2
Local Phone Configuration
Administration via WBM
Applications > XML Applications > Add application
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 125
administration.fm
Administration
Corporate Phonebook: Directory Settings
Add application
Display name
Application name
HTTP Server address
HTTP Server port
Protocol
Program name on server
Use proxy
XML Trace enabled
Debug program on server
Number of tabs
All tabs Start
Tab 1 Display Name
Tab 1 Application name
Tab 2 Display Name
Tab 2 Application name
Tab 3 Display Name
Tab 3 Application name
Restart after change
Submit ldap ldap
172.29.136.224
443 https ldap
Yes
Yes
0
Reset
|
--Administration
|
--Applications
|
--XML
|
--Add application
|--- Display name
|--- Application name
|--- Server address
|--- Server port
|--- Protocol
|--- Program name
|--- Auto start
|--- Use Proxy
|--- XML trace
|--- Debug name
|--- Number of tabs
|--- All tabs start
|--- Tab 1 display name
|--- Tab 1 application name
|--- Tab 2 display name
|--- Tab 2 application name
|--- Tab 3 display name
|
|--- Tab 3 application name
--- Restart after change
126
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Corporate Phonebook: Directory Settings
Variable parts of the configuration:
• Server address – the ip address of the server hosting the feature servlet (Softgate)
• Server port – the http port (varies according to the Protocol configured, but Softgate only allows 443)
• Protocol – https (Softgate only allows https).
• Use proxy – Yes means the ldap server only provides a reference to the picture for indirect retrieval, No means the ldap server provides the picture itself (direct retrieval)
Display name, Application name, Program name must be configured as shown. None of the other configuration items are currently evaluated for the feature.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 127
administration.fm
Administration
Corporate Phonebook: Directory Settings
3.10.2.3
Phone Canonical Settings
For contact data retrieval from the directory server, upon arrival of a call, the remote telephone
numbers are stored in the directory server. It is recommended to convert the numbers to fully qualified format, i.e. adding country and area code to the subscriber number. This way it is ensured that the number used for lookup is unique.
Below is an example of settings for a company in Munich.
Administration via WBM
Local functions > Locality > Canonical dial settings
Canonical dial settings
Local country code
National prefix digit
Local national code
Minimum local number length
Local enterprise node
PSTN access code
International access code
Operator codes
Emergency numbers
Initial extension digits
Submit
8008
0
00
49
0
89
5
1,2,3,4,5,6,7,8,9
Reset
|
--Administration
|
--Local Functions
|
--Locality
|
--Canonical dial settings
|--- Local country code
|--- National prefix digit
|--- Local national code
|--- Minimum local number length
|--- Local enterprise node
|--- PSTN access code
|--- International code
|--- Operator code
|
|--- Emergency number
--- Inital extension digits
128
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Speech
3.11
Speech
3.11.1
RTP Base Port
The port used for RTP is negotiated during the establishment of a HFA connection. The RTP base port number defines the starting point from which the phone will count up when negotiating. The default value is 5004.
The number of the port used for RTCP will be the RTP port number increased by 1.
Administration via WBM
Network > Port Configuration
Port configuration
Gateway
Standby gateway
RTP base
System H.225
Standby H.225
System Cornet TLS
Standby Cornet TLS
System H.225 TLS
Standby H.225 TLS
Download server (default)
LDAP server
HTTP Proxy
LAN port speed
PC port speed
PC port mode
PC port autoMDIX
Automatic
Automatic disabled
Submit Reset
4060
4060
1300
1300
21
389
0
5004
1720
1720
4061
4061
Administration via Local Phone
|
--Admin
|
--Network
|
--Port configuration
|
--- RTP base
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 129
administration.fm
Administration
Speech
3.11.2
Codec Preferences
If Silence suppression is activated, the transmission of data packets is suppressed on no conversation, that is, if the user doesn’t speak.
The OpenScape Desk Phone IP phone provides the codecs G.711, G.722, and G.729. When a HFA connection is established between two endpoints, the phones negotiate the codec to be used. The result of the negotiation is based on the general availability and ranking assigned to each codec. The administrator can allow or disallow a codec as well as assign a ranking number to it.
The Packet size, i. e. length in milliseconds, of the RTP packets for speech data, can be set to
10ms, 20ms, 30ms, 60ms or to automatic detection.
Data required
• Silence suppression : Suppression of data transmission on no conversation.
Value range: "On", "Off"
Default: "Off"
• Allow "HD" icon : If "On" an additional icon is shown when codec G.722 is used.
Value range: "On", "Off"
Default: "On"
• Packet size : Size of RTP packets in milliseconds.
Value range: "10 ms", "20ms", "30ms", "60ms", "Automatic"
Default: "Automatic"
• G.711
: Parameters for the G. 711 codec.
Value Range: "Choice 1", "Choice 2", "Choice 3", "Disabled", "Enabled"
Default: "Choice 1"
• G.729
: Parameters for the G. 729 codec.
Value Range: "Choice 1", "Choice 2", "Choice 3", "Disabled", "Enabled"
Default: "Choice 2"
• G.722
: Parameters for the G. 722 codec.
Value Range: "Choice 1", "Choice 2", "Choice 3", "Disabled", "Enabled"
Default: "Disabled"
130
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Administration via WBM
Speech > Codec preferences
Codec preferences
Silence suppression
Packet size
G.711 ranking
G.729 ranking
G.722 ranking
Submit
Automatic
X
Reset
X
Administration via Local Phone
|
--Admin
|
--Speech
|
--Codec Preferences
|--- Silence suppression
|--- Packet size
|--- G.711
|
|--- G.729
--- G.722 administration.fm
Administration
Speech
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 131
administration.fm
Administration
Speech
3.11.3
Display General Phone Information
General information about the status of the phone can be displayed if desired.
Displayed Data
• MAC address : Shows the phone’s MAC address.
• Software version : Displays the version of the phone’s firmware.
• Last restart : Shows date and time of the last reboot.
Display on the WBM
General information
General information
MAC address: 0001e323f9a1
Software version:
Last restart:
0.7.5.0004-061027
2014-02-18T13:30
Display on the Local Phone
|
---
Admin
|
---
General Information
|--- MAC address
|--- Software version
|
--- Last restart
132
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Applications
3.12
3.12.1
Applications
XML Applications/Xpressions(OpenScape Desk Phone IP 55G)
3.12.1.1
Setup/Configuration
The XML interface enables server-based applications with a set of GUI elements. The technologies commonly used in web applications can be used: Java Servlets, JSP, PHP, CGI etc., delivered by servers such as Tomcat, Apache, Microsoft IIS.
> A maximum number of 20 XML applications can be configured on OpenScape Desk
Phone IP 55G.
An XML application can be started by using the Menu key to navigate to the Applications tab and then selecting an application, or by assigning it to a program key (System > Features >
Program keys).
> Xpressions
is a special Unified Communications application which also uses the
XML interface. Thus, the configuration is just the same as with other XML applications, except a few parameters, which are pre-configured. For details, please refer to the relevant Xpressions documentation. When configured on the phone, a press on
Message will invoke this application.
> XML Phonebook is a preconfiguration intended for a regular XML application with phonebook functionality. When configured on the phone, a press on Directory key will invoke this application, in place of the personal (local) or corporate (LDAP) phonebook.
For detailed information about the XML application interface, please see the OpenScape Desk
Phone IP 55G - XML Applications Developer’s Guide. You can find the current version under http://wiki.unify.com/index.php/OpenStage_XML_Applications .
To set up a new XML application, enter the access data for the application on the server, which is described in the following.
The Display name can be defined freely. This name will appear in the applications tab once the application is configured, and it will appear in a newly created tab when the application is running. With Xpressions, this value is predefined as "Xpressions".
The Application name is used by the phone software to identify the XML application running on the phone. With Xpressions, this value is predefined as "Xpressions".
The HTTP Server address is the IP address or domain name of the server which hosts the remote program. HTTP Server port specifies the corresponding port.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 133
administration.fm
Administration
Applications
The Protocol for exchanging XML data with the server-side program can be set to "HTTP" or
"HTTPS".
Program name on server specifies the relative path to the servlet or to the first XML page of the application on the server. The relative path refers to the root directory for documents on the web server. For instance, if an XML document is saved in:
C:\Program Files\Apache Group\Apache\htdocs\ipp\ippTest.xml
the entry is: ipp/ippTest.xml
.
The program name cannot be longer than 100 characters.
Auto start determines whether the application is started automatically on phone startup or on mobile user logon. Please note that, for being started on logon, the application must be part of the mobile user’s profile. When activated, the application will be ready without delay as soon as the user presses the corresponding start key or navigates to the application in the application menu.
XML trace enabled determines whether debugging information is sent to a special debugging program on the remote server. The relative path for the debugging program is given by the De- bug program name parameter. When enabled, trace information about the XML elements and key internal objects is sent to the remote debug program.
Debug program name specifies the relative path to a special program on the same server as the program specified by Program name. This program must be able to receive the debug information sent by the phone as HTTP/HTTPS POST requests with Content-Type set to application/x-www-form-urlencoded
.
XML applications can have internal tabs, if desired. The number of these tabs is specified in
Number of tabs .
> For an XML application with a number of tabs > 0, one of the entries between Tab
1 Application Name and Tab 3 Application Name must be set to the same value as the Application name that it is associated with. When the XML application is started, the tab which has the same name as the XML application is the tab that initially gets focus.
All tabs start determines whether all tabs of the application are started automatically when the application is started.
Tab 1...3 Display Name
provides the label text for the corresponding tab.
Tab 1...3 Application Name
is required if the application has internal tabs. This is a unique name for the specified tab. The remote program will use this name to provide the tab with specific content.
Auto restart
/ Restart after change : If checked, a running XML application is automatically restarted after it has been modified. This might be especially useful for special XML applications, like messages applications, or phonebook applications, as these cannot be stopped or
134
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Applications restarted by the user. Please note that a restart will take place even if no changes have been made for the application selected in the Modify/Delete application mask, and Submit has been pressed. After the XML application has restarted, this option is automatically unchecked.
If the option is checked whilst the XML application is not running, there will be no restart, and the option is automatically unchecked.
Data required
• Display name : Program name to be displayed on the phone.
Value specifications:
– It must be unique on the phone.
– It cannot contain the ’^’ character.
– It cannot not be empty.
– Its length cannot not exceed 20 characters.
• Application name : Used internally to identify the XML application running on the phone.
Value specifications:
– It must be unique on the phone.
– It cannot contain non-alphanumeric characters, spaces for instance.
– The first character must be a letter.
– It must not be empty.
– Its length must not exceed 20 characters.
• Protocol : Communication protocol for the data exchange with the server.
Value range: "HTTP", "HTTPS"
Default: "HTTPS"
• HTTP Server address : IP address or domain/host name of the server that provides the application or the XML document.
Examples: 192.168.1.133, backoffice.intranet
• Server port number : Number of the port that the server uses to provide the application or
XML document.
Examples: 80 (Apache default port), 8080 (Tomcat default port).
• Program name : Relative path to the servlet or to the first XML page of the application on the server. For instance, if an XML document is saved in:
C:\Program Files\Apache Group\Apache\htdocs\ipp\ippTest.xml
the entry is: ipp/ippTest.xml
The program name cannot be longer than 100 characters.
• XML trace enabled : Enables or disables the debugging of the XML application.
Value range: "Yes", "No"
Default: "No"
• Debug program name : The relative path to a special servlet that receives the debug information.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 135
administration.fm
Administration
Applications
Administration via WBM
A fixed function key can be defined as a start key for an XML application, in addition to the previously available start methods. Since the parameters are the same for those types of application, only the screenshot for a regular XML application is shown underneath.
Applications > XML applications > Add application
Applications > XML applications > Add messages application
Applications > XML applications > Xpressions
Applications > XML applications > Add directory application
Applications > XML applications > Add call log application
Add application
Display name
Application name
HTTP Server address
HTTP Server port
Protocol
Program name on server
Auto start
Use proxy
XML Trace enabled
Debug program on server
Number of tabs
All tabs Start
Tab 1 Display Name
Tab 1 Application Name
Tab 2 Display Name
Tab 2 Application Name
Tab 3 Display Name
Tab 3 Application Name
Restart after change
Submit http
Yes
Yes
0
Reset
136
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Applications > XML Applications > Modify/Delete application
Modify/Delete application
Select application
Modify testxml
Delete
Settings
Display name
Application name
HTTP Server address
HTTP Server port
Protocol
Program name on server
Auto start
Use proxy
XML Trace enabled
Debug program on server
Number of tabs
All tabs start
Tab 1 Display Name
Tab 1 Application Name
Tab 2 Display Name
Tab 2 Application Name
Tab 3 Display Name
Tab 3 Application Name
Restart after change
Mode key
Submit testxml testxml
192.168.1.150
8080 http testxml/servlet
;
No
No
0
0
Reset
Administration via Local Phone
|
--Admin
|
--Applications
|
--XML
|
--Add application
|--- Display name
|--- Application name
|--- Server address
|--- Server port
|--- Protocol
|--- Program name
|--- Auto start
|--- Use Proxy
|--- XML trace
|--- Debug name
|--- Number of tabs
|--- All tabs start
|--- Tab 1 display name
|--- Tab 1 application name
|--- Tab 2 display name
|--- Tab 2 application name
|--- Tab 3 display name
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual administration.fm
Administration
Applications
137
administration.fm
Administration
Applications
|
|--- Tab 3 application name
--- Restart after change
138
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Applications
3.12.1.2
HTTP Proxy
For the HTTP data transfer between the phone and the server hosting the remote program, an
HTTP proxy can be used.
First, the proxy itself must be configured. Enter the IP address of the proxy it in the Network >
IP configuration > HTTP proxy parameter, and the corresponding port in the Network > Port configuration > HTTP proxy parameter.
Use proxy enables or disables the use of the proxy. If disabled, the phone connects directly to the server. By default, the use of a proxy is disabled.
Administration via WBM
Applications > XML Applications > Add application
Add application
Display name
Application name
HTTP Server address
HTTP Server port
Protocol
Program name on server
Use proxy
XML Trace enabled
Debug program on server
Submit http
Yes
Yes
Reset
Applications > XML Applications > Modify/Delete application
Modify/Delete application
Select application
Modify
Weather
Delete
Settings
Display name
Application name
HTTP Server address
HTTP Server port
Protocol
Program name on server
Use proxy
XML Trace enabled
Debug program on server
Submit
Weather
Weather
87.106.21.36
8080 http
WR/WR
No
No
Reset
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 139
administration.fm
Administration
Applications
Network > IP configuration
IP configuration
Disable DHCP
LLDP-MED Enabled
DHCP Enabled
IP address
Subnet mask
Default route
192.168.1.105
255.255.255.0
192.168.1.2
DNS domain
Primary DNS
Secondary DNS
192.168.1.105
192.168.1.2
Route 1 IP address
Route 1 gateway
Route 1 mask
Route 2 IP address
Route 2 gateway
Route 2 mask
VLAN discovery
VLAN ID
HTTP proxy
DHCP
Submit Reset
Administration via Local Phone
|
--Administration
|
--Applications
|
--XML
|--Add application
|
|
| --- Use proxy
--Add Xpressions
|
--- Use proxy
|
--Administration
|
--Network
|
--IP Configuration
|
--- HTTP proxy
|
--Administration
|
--Network
|
--Port configuration
|
--- HTTP proxy
140
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Applications
3.12.1.3
Modify an Existing Application
An existing application can be modified by changing its parameters. Please ensure to select the desired application before changing the parameters.
Administration via WBM
Applications > XML applications > Modify/Delete application
Modify/Delete application
Select application
Modify
Weather
Delete
Settings
Display name
Application name
HTTP Server address
HTTP Server port
Protocol
Program name on server
Use proxy
XML Trace enabled
Debug program on server
Submit
Weather
Weather
87.106.21.36
8080 http
No
No
WR/WR
Reset
Administration via Local Phone
|
--Admin
|
--Applications
|
--XML
|
--<Application to be modified>
|--- Display name
|--- Application name
|--- Server address
|--- Server port
|--- Protocol
|--- Program name
|
|--- XML trace enabled
--- Debug program name
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 141
administration.fm
Administration
Applications
3.12.1.4
Remove an Existing Application
An existing application can be removed. Please ensure to select the desired application before changing the parameters.
Administration via WBM
Applications > XML applications > Modify/Delete application
Modify/Delete application
Select application
Modify
Weather
Delete
Settings
Display name
Application name
HTTP Server address
HTTP Server port
Protocol
Program name on server
Use proxy
XML Trace enabled
Debug program on server
Submit
Weather
Weather
87.106.21.36
8080 http
No
No
WR/WR
Reset
Administration via Local Phone
Select the application to be deleted, and, in the context menu, select Remove & exit.
|
--Admin
|
--Applications
|
--XML
|
--<Application to be deleted>
142
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Password
3.13
Password
The passwords for user and administrator can be set here. They have to be confirmed after entering. The default factory setting for the administrator password is "123456"; it should be changed after the first login (see Change Admin and User password). The factory setting for the user password is "not set", i. e. no password.
Usable characters are 0-9 A-Z a-z ."*#,?!’+-()@/:_
Administration via WBM
Security and Policies > Password > Change Admin password
Change Admin password
Current password
New password
Confirm password
Submit Reset
Security and Policies > Password > Change User password
Change User password
Admin password
New password
Confirm password
Submit Reset
Administration via Local Phone
|
--Admin
|
--Security and policies
|--Change admin password
|
|
| |--- Current admin
| |--- Admin
|
--- Confirm admin
--Change user password
|--- Admin password
|
|--- New user password
--- Confirm new user
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 143
administration.fm
Administration
Troubleshooting: Lost Password
3.14
Troubleshooting: Lost Password
If the administration and/or user password is lost, and there is no DLS available, new passwords must be provided. In case of lost administration password, a factory reset is necessary.
In case of lost user password, the administrator may reset the user password. Take the following steps to initiate a factory reset:
1. On the phone, press the Service/Settings key to activate the administration menu (the
Menu key toggles between the user’s configuration menu and the administration menu).
2. Press the number keys 2-8-9 simultaneously. The factory reset menu opens. If not, the key combination is deactivated due to security reason.
3. In the input field, enter the special password for factory reset: "124816".
4. Confirm by pressing OK.
3.15
Restart Phone
If necessary, the phone can be restarted from the administration menu or via pressing number keys 1-4-7 simultaneously.
Administration via WBM
Maintenance > Restart Phone
Restart Phone
Confirm Restart
Administration via Local Phone
|
--Admin
|
--Maintenance
|
--- Restart
3.16
Factory Reset
This function resets all parameters to their factory settings. A special reset password is required for this operation: "124816".
Administration via WBM
Maintenance > Factory reset
144
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
SSH – Secure Shell Access
Factory reset
Factory reset password
Submit Reset
Administration via Local Phone
|
--Admin
|
--Maintenance
|
--- Factory reset
3.17
SSH – Secure Shell Access
The phone’s operating system can be accessed via SSH for special troubleshooting tasks.Hereby, the administrator is enabled to use the built-in Linux commands. As soon as SSH access has been enabled using the WBM, the system can be accessed by the user "admin" for a specified timespan. When this timespan has expired, no connection is possible any more.
The user "admin" has the following permissions:
• Log folder and files: read only
• User data folder and files: read/write access
• Opera deploy folders and files: read only
• Version folder: read/write access; version files: read only
> It is not possible to logon as root via SSH.
When Enable access is enabled, and the parameters described underneath are specified,
SSH access is activated. By default, SSH access is disabled.
With the Session password parameter, a password for the "admin" user is created. This password is required. It will be valid for the timespan specified in the parameters described underneath.
Access minutes defines the timespan in minutes within which the SSH connection must be established. After it has expired, a logon via SSH is not possible. The possible values ranges from 1 to 10.
Session minutes defines the maximum length in minutes for an SSH connection. After it has expired, the "admin" user is logged out. The possible values are 5, 10, 20, 30, 60.
Administration via WBM
Maintenance > Secure Shell
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 145
administration.fm
Administration
Display License Information
Secure Shell
Enable access
Session password
Access minutes
Session minutes
Submit
1
1
Reset
3.18
Display License Information
The license information for the OpenStage phone software currently loaded can be viewed via the local menu.
> The license information can also be viewed by users who logged on using the User login if logging on as Admin is not permitted.
Administration via Local Phone
|
---
Admin
|
--- Licence information
3.19
HPT Interface (For Service Staff)
For special diagnosis and maintenance tasks, the service staff may employ the HPT tool, which is able to control and observe an OpenStage phone remotely. For security reasons, this tool
can only be used when a dongle key file is uploaded to the phone (see Section 3.9.9, “Dongle
version, but it will also be valid for previous versions.
There are 2 types of HPT sessions, control session and observation session.
A control session allows for activating phone functions remotely. When a control session is established, the following changes will occur:
• The display shows a message indicating that remote service is active.
• Handset, microphone, speaker, headset, and microphone are disabled.
An observation session allows for supervising events on the phone, like, for instance, pressing a key, incoming calls or navigating in the menus. Before an observation session is started, the user is prompted for allowing the observation. During an observation session, the phone operates normally, including loudspeaker, microphone and ringer. Thus, the local user can demonstrate an error towards the service staff that is connected via HPT.
The HPT interface is enabled by downloading the dongle key file to the phone (see Section
3.9.9, “Dongle Key”). It can be disabled via local menu or WBM. Thereby, the dongle key file is
deleted. To enable the HPT interface again, the file must be downloaded anew.
146
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Diagnostics
The session data is written to a log file on the phone. It can be downloaded from the Diagnostics
> Fault trace configuration menu (see Section 3.20.2, “Fault Trace Configuration”).
Administration via WBM
Maintenance > HPT interface
HPT interface
Disable HPT
Administration via Local Phone (Disable)
|
--Administration
|
--Maintenance
|
--- Disable HPT / Enable HPT
3.20
Diagnostics
> Some of the diagnostic tools and functions may reveal personal data of the user, such as caller lists. Thus, with regards to data privacy, it is recommended to inform the user when diagnostic functions are to be executed.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 147
administration.fm
Administration
Diagnostics
3.20.1
LLDP-MED
When the phone is connected to a switch with LLDP-MED capabilities, it can receive a VLAN
ID and QoS parameters and advertise its own network-related properties. The data is exchanged in TLV (Type-Length-Value) format.
Both sent and received LLDP-MED data can be monitored at the administrator interface.
> For details on LLDP-MED, please refer to the ANSI/TIA-1057 standard.
For a network configuration example that shows LLDP-MED in operation, please refer to
Section 4.4, “An LLDP-Med Example”.
Displayed Data
•
Extended Power
: Power Consumption; relevant for PoE.
•
Network policy (voice)
: VLAN ID and QoS (Quality of Service) parameters for voice transport.
•
Network policy (signalling)
: VLAN ID and QoS (Quality of Service) parameters for signalling.
•
LLDP-MED capabilities
: The LLDP-MED TLVs supported by the phone and the switch as well as the specific device class they belong to.
•
MAC_Phy configuration
: Identifies the possible duplex and bit-rate capability of the sending device, its current duplex and bit-rate capability, and whether theses settings are the result of auto-negotiation during the initialization of the link, or of manual set override actions.
•
System capabilities
: The devices advertise their potential and currently enabled functions, e. g. "Bridge", "Telephone".
•
TTL
: Time To Live. This parameter determines how long the TLVs are valid. When expired, the device will send a new set of TLVs.
Administration via WBM
Admin > Network > LLDP-MED operation
LLDP-MED operation
Time to live (seconds)
Submit Reset
120
148
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Diagnostics
View Data From WBM
Diagnostics > LLDP-MED TLVs
LLDP-MED TLV’s
Sent
Sent: Mon Oct 27 10:41:14 2013
Chassis ID TLV Data
.ID = 163.165.2.105
TTL TLV Data
.seconds = 120
System Caps TLV Data
.Supported = Bridge, Telephone
.Enabled = Telephone
Received
Received: Mon Oct 27 10:41:14 2013
Chassis ID TLV Data
.ID = 00:3E:37:01:20:01
TTL TLV Data
.seconds = 120
System Caps TLV Data
.Supported = Other, Repeater
.Enabled = Other, Repeater
View Data From Local Menu
If both sent and received values are concordant, OK is appended to the parameter. If not, an error message is displayed.
|
--Admin
|
--Network
|
--LLDP-MED operation
|--- Extended Power
|--- Network policy (voice)
|--- Network policy (signalling)
|--- LLDP-MED cap’s
|--- MAC_Phy config
|--- System cap’s
|
--- TTL
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 149
administration.fm
Administration
Diagnostics
3.20.2
Fault Trace Configuration
Error tracing and logging can be configured separately for all components, i. e. the services and applications running on the OpenScape Desk Phone IP. The resulting files can be viewed in the WBM web pages over the Download links.
The File size (bytes) parameter sets the maximum file size. When it is reached, the data is saved as old file, and a new file is generated. From then on, the trace data is written to the new file. When the maximum file size is reached again, the data is saved as old file once more, thereby overwriting the previous old file. The default value is 1048576.
> The absolute maximum file size is 6290000 bytes. However, on OpenScape Desk
Phone IP phones, a maximum size not greater than 1000 000 bytes is recommended due to the amount of available memory.
The Trace timeout (minutes) determines when to stop tracing. When the timeout is reached, the trace settings for all components are set to OFF, but ERROR and STATUS messages are still written to the trace file ad infinitum. When the trace file has reached its maximum size, the data is saved, and a new file is created (for more information, see File size (bytes) above). If the value is 0, the trace data will be written without time limit.
If Automatic clear before start is checked, the existing trace file will be deleted on pressing the Submit button, and a new, empty trace file will be generated. By default, it is unchecked.
You can read the log files by clicking on the appropriate hyperlinks (the hyperlinks work only if the file in question has been created). The following logs can be viewed:
• Download trace file
The trace data according to the settings specified for the services.
• Download old trace file
The trace file is stored in permanent memory. When the file has reached its size limit, it will be saved as old trace file, and the current exception file is emptied for future messages.
The old trace file can be viewed here.
• Download saved trace file
Normally, the trace file is saved only in the phone RAM. When the phone restarts in a controlled manner, the trace file will be saved in permanent memory.
• Download syslog file
Messages from the phone’s operating system, including error and exception messages.
• Download old syslog file
Old messages from the phone’s operating system.
• Download saved syslog file
Saved messages from the phone’s operating system.
• Download exception file
If an exceptions occurs in a process running on the phone, a message is written to this file.
These messages are incorporated in the syslog file (see Download syslog file also).
150
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Diagnostics
• Download old exception file
The exception file is stored permanent memory. When the file has reached its size limit, it will be saved as old exception file, and the current exception file is emptied for future messages. The old exception file can be viewed here.
• Download H.323 trace file
• Download upgrade trace file
The trace log created during a software upgrade.
• Download upgrade error file
The error messages created during a software upgrade. These messages are incorporat-
ed in the syslog file (see Download syslog file also).
• Download Database file
Configuration parameters of the phone in SQLite format.
• Download HPT remote service log file
Log data from the HPT service.
By pressing Submit, the trace settings are submitted to the phone. With Reset, the recent changes can be canceled.
The following trace levels can be selected:
• OFF : Default value. Only error messages are stored.
• FATAL : Only fatal error messages are stored.
• ERROR : Error messages are stored.
• WARNING : Warning messages are stored.
• LOG : Log messages are stored.
• TRACE : Trace messages are stored. These contain detailed information about the processes taking place in the phone.
• DEBUG : All types of messages are stored.
Brief Descriptions of the Components/Services
• Administration
Deals with the changing and setting of parameters within the phone database, from both the User and Admin menus.
• AGP Phonelet
• Application framework
All applications within the phone, e.g. Call view, Call log, or Phonebook, are run within the application framework. It is responsible for the switching between different applications and bringing them into and out of focus as appropriate.
• Application menu
This is where applications to be run on the phone can be started and stopped.
• Bluetooth service (not applicable for OpenScape Desk Phone IP 33G/55G)
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 151
administration.fm
Administration
Diagnostics
Handles the Bluetooth interactions between external Bluetooth devices and the phone.
Bluetooth is available only on OpenStage 60/80 phones.
• Call Log
The Call log application displays the call history of the phone.
• Call View
Handles the representation of telephony calls on the phone screen.
• Certificate management
Handles the verification and exchange of certificates for security and verification purposes.
• Clock Service
Handles the phone’s time and date, including daylight saving and NTP functionality.
• Communications
Involved in the passing of call related information and signaling to and from the CSTA service.
• Component registrar
Handles data relating to the type of phone, e.g. OpenScape Desk Phone IP 33G/55G HFA.
• CSTA service
Any CSTA messages are handled by this service. CSTA messages are used within the phone by all services as a common call progression and control protocol.
• Data Access service
Allows other services to access the data held within the phone database.
• Desktop
Responsible for the shared parts of the phone display. Primarily these are the status bar at the top of the screen and the FPK labels.
• Digit analysis service
Analyses and modifies digit streams which are sent to and received by the phone, e.g. canonical conversion.
• Directory service
Performs a look up for data in the phonebook, trying to match incoming and outgoing numbers with entries in the phonebook.
• DLS client management
Handles interactions with the DLS (Deployment Service).
• Health service
Monitors other components of the phone for diagnostic purposes and provides a logging interface for the services in the phone.
• Help
Handles the help function.
• H.323 messages
• HFA service agent
152
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Diagnostics
• HTTP Service
Handles the HTTP Service messages.
• Instrumentation service
Used by the Husim phone tester to exchange data with the phone for remote control, testing and monitoring purposes.
• Journal service
Responsible for saving and retrieving call history information, which is used by the Call log application.
• Media control service
Provides the control of media streams (voice, tones, ringing etc. ) within the phone.
• Media processing service
This is a layer of software between the media control service, the tone generation, and voice engine services. It is also involved in the switching of audio devices such as the handset and loudspeaker.
• Mobility service
Handles the mobility feature whereby users can log onto different phones and have them configured to their own profile.
• OBEX service (Not applicable for OpenScape Desk Phone IP 33G/55G)
Involved with Bluetooth accesses to the phone.
Bluetooth is available only on OpenStage 60/80 phones.
• OpenStage client management
Provides a means by which other services within the phone can interact with the database.
• Password management service
Verifies passwords used in the phone.
• Phonebook
Responsible for the phonebook application.
• Performance Marks
Aid for measuring the performance of the phone. For events triggered by the user, a performance mark is written to the trace file, together with a timestamp in the format hh:mm:ss yyyy.milliseconds, and information about the event. The timespan between two performance marks is an indicator for the performance of the phone.
> The trace level must be set to "TRACE" or "DEBUG".
• Physical interface service
Handles any interactions with the phone via the keypad, mode keys, fixed feature buttons, clickwheel and slider.
• Service framework
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 153
administration.fm
Administration
Diagnostics
This is the environment within which other phone services operate. It is involved in the starting and stopping of services.
• Service registry
Keeps a record of all services currently running inside the phone.
• Security Log Service
• Sidecar service
Handles interactions between the phone and any attached sidecars.
• Tone generation service
Handles the generation of the tones and ringers on the phone.
• Transport service
Provides the IP (LAN) interface between the phone and the outside world.
• USB backup service
Used to make backup/restore to/from USB stick by using password. This item is available in the phone GUI.
• vCard parser service
Handles parsing and identification of VCard information while sending or getting VCards via Bluetooth.
• Voice engine service
Provides a switching mechanism for voice streams within the phone. This component is also involved in QDC, Music on hold and voice instrumentation.
• Voice mail
Handles the voice mail functionality.
• Voice recognition
Used by the voice dial facility for recognizing spoken dialing commands.
• Web server service
Provides access to the phone via web browser.
• 802.1x service
Provides authentication to devices attached to a LAN port, establishing a point-to-point connection or preventing access from that port if authentication fails. The service is used for certain closed wireless access points.
154
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Diagnostics
Administration via WBM
Diagnostics > Fault trace configuration
File size (bytes)
Fault trace configuration
65536 Trace timeout (minutes)
Trace levels for components
Administration
Application menu
Call Log
Certificate management
Component registrar
Data Access service
Digit analysis service
DLS client management
Help
H.323 messages
Media procession service
Instrumentation service
OBEX service
Phonebook
Password management service
Service framework
Sidecar service
Transport service
Voice generation service vCard parser service
Web server service
Voice recognition
Clock Service
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Application framework
Bluetooth service
Call View
Communications
CSTA service
Desktop
Directory service
Health service
HFA service agent
AGP Phonelet
Media control service
OpenStage client management
Performance Marks
Physical interface service
Service registry
Tone generation service vCard parser service
Voice mail
Transport service
USB backup service
802.1 x service
Security Log Service
HTTP Service
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
0 Automatic clear before start
Download trace file
Download syslog file
Download saved trace file
Download old syslog file
Download upgrade error file Download HPT remote service log file
Submit
Download upgrade trace file
Download saved syslog file
Download dial plan file
Download old trace file
Download Database file
Reset
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 155
administration.fm
Administration
Diagnostics
3.20.3
EasyTrace Profiles
In order to simplify tracing for a specific problem, the tracing levels can be adjusted using predefined settings. The EasyTrace profiles provide settings for a specific area, e. g. call connection. On pressing Submit, those pre-defined settings are sent to the phone. If desired, the settings can be modified anytime using the general mask for trace configuration under
Diagnostics
> Fault Trace Configuration (see Section 3.20.2, “Fault Trace Configuration”).
If desired, the tracing for all services can be disabled (see Section 3.20.3.21, “No Tracing for
The following sections describe the EasyTrace profiles available for the phone.
3.20.3.1
Call Connection
Diagnostics > EasyTrace Profiles > Call connection
Call connection
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
1048576
0
Trace levels for components
Component registrar
Health service
Service registry
Call View
Communications
CSTA service
H.323 messages
TRACE
LOG
TRACE
TRACE
TRACE
TRACE
DEBUG
Download trace file
Download H.323 trace file
Submit
Download saved trace file
Reset
> This EasyTrace profile contains the tracing of H.323 messages. Please note that after changing the level for the tracing of H.323 messages, the phone must be rebooted.
156
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
3.20.3.2
Call Log Problems
Diagnostics > EasyTrace Profiles > Call log problems
Call log problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
1048576
0
Trace levels for components
Call Log
Component registrar
Health service
Application framework
Desktop
Journal service
Download trace file
Download H.323 trace file
Submit
TRACE
TRACE
LOG
TRACE
TRACE
TRACE
Download saved trace file
Reset
3.20.3.3
DAS Connection
Diagnostics > EasyTrace Profiles > DAS connection
DAS connection
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
Trace levels for components
1048576
0
Certificate management
Component registrar
Health service
DLS client management
Service framework
Download trace file
Download H.323 trace file
Submit
LOG
TRACE
LOG
TRACE
TRACE
Download saved trace file
Reset administration.fm
Administration
Diagnostics
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 157
administration.fm
Administration
Diagnostics
3.20.3.4
DLS Data Errors
Diagnostics > EasyTrace Profiles > DLS data errors
DLS data errors
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
Trace levels for components
1048576
0
Certificate management
Component registrar
Data Access service
Health service
DLS client management
OpenStage client management
Service framework
Download trace file
Download H.323 trace file
Submit
LOG
TRACE
TRACE
LOG
TRACE
LOG
TRACE
Download saved trace file
Reset
3.20.3.5
HFA registration and security
Diagnostics > EasyTrace Profiles > HFA registration and security
HFA registration and security problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
1048576
0
Trace levels for components
Communications
H.323 messages
Download trace file
Download H.323 trace file
Submit
TRACE
TRACE
Download saved trace file
Reset
158
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
3.20.3.6
Help Application
Diagnostics > EasyTrace Profiles > Help application problems
Help application problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
1048576
0
Trace levels for components
Application menu
Component registrar
Health service
Application framework
Help
Web server service
Download trace file
Download H.323 trace file
LOG
TRACE
LOG
TRACE
DEBUG
TRACE
Download saved trace file
Submit Reset
3.20.3.7
Key Input
Diagnostics > EasyTrace Profiles > Key input problems
Key input problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
Trace levels for components
1048576
0
Component registrar
Health service
Physical interface service
Download trace file
Download H.323 trace file
Submit
TRACE
LOG
DEBUG
Download saved trace file
Reset administration.fm
Administration
Diagnostics
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 159
administration.fm
Administration
Diagnostics
3.20.3.8
LAN Connectivity
Diagnostics > EasyTrace Profiles > LAN connectivity problems
LAN connectivity problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
1048576
0
Trace levels for components
Component registrar
Health service
Transport service
HTTP service
Download trace file
Download H.323 trace file
Submit
TRACE
LOG
TRACE
TRACE
Download saved trace file
Reset
3.20.3.9
Messaging
Diagnostics > EasyTrace Profiles > Messaging application problems
Messaging application problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
1048576
0
Trace levels for components
Component registrar
Health service
Application framework
Call View
CSTA service
Desktop
Communications
Download trace file
Download H.323 trace file
Submit
TRACE
LOG
TRACE
TRACE
TRACE
TRACE
TRACE
Download saved trace file
Reset
160
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
3.20.3.10
Mobility
Diagnostics > EasyTrace Profiles > Mobility problems
Mobility problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
Trace levels for components
1048576
0
Administration
Data Access service
DLS client management
Mobility service
Download trace file
Download H.323 trace file
Submit
TRACE
TRACE
LOG
TRACE
Download saved trace file
Reset
3.20.3.11
Phone administration
Diagnostics > EasyTrace Profiles > Phone administration problems
Phone administration problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
1048576
0
Trace levels for components
Administration
Health service
OpenStage client management
Application framework
Communications
CSTA service
Desktop
Download trace file
Download H.323 trace file
TRACE
WARNING
LOG
TRACE
TRACE
TRACE
TRACE
Download saved trace file
Submit Reset administration.fm
Administration
Diagnostics
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 161
administration.fm
Administration
Diagnostics
3.20.3.12
Local Phonebook
Diagnostics > EasyTrace Profiles > Phonebook (local) problems
Phonebook (local) problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
1048576
0
Trace levels for components
Application menu
Component registrar
Health service
Application framework
Desktop
Journal service
Download trace file
Download H.323 trace file
Submit
LOG
TRACE
LOG
TRACE
TRACE
TRACE
Download saved trace file
Reset
3.20.3.13
LDAP Phonebook
Diagnostics > EasyTrace Profiles > Phonebook (LDAP) problems
Phonebook (LDAP) problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
1048576
0
Trace levels for components
Application menu
Component registrar
Directory service
Health service
Application framework
Desktop
Journal service
Transport service
Download trace file
Download H.323 trace file
Submit
LOG
TRACE
LOG
TRACE
TRACE
TRACE
TRACE
TRACE
Download saved trace file
Reset
162
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
3.20.3.14
Server based applications
Diagnostics > EasyTrace Profiles > Server based application problems
Server based application problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
1048576
0
Trace levels for components
AGP Phonelet
Download trace file
Download H.323 trace file
Submit
LOG
Download saved trace file
Reset
3.20.3.15
Sidecar
Diagnostics > Easy Trace Profiles > Sidecar problems
Sidecar problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
Trace levels for components
1048576
0
Component registrar
Health service
Sidecar service
Download trace file
Download H.323 trace file
Submit
TRACE
LOG
DEBUG
Download saved trace file
Reset
3.20.3.16
Speech
Diagnostics > EasyTrace Profiles > Speech problems
Speech problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
Trace levels for components
1048576
0
Component registrar
Health service
Voice engine service
Media processing service
Download trace file
Download H.323 trace file
Submit
TRACE
LOG
TRACE
TRACE
Download saved trace file
Reset
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual administration.fm
Administration
Diagnostics
163
administration.fm
Administration
Diagnostics
3.20.3.17
Tone
Diagnostics > EasyTrace Profiles > Tone problems
Tone problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
Trace levels for components
1048576
0
Component registrar
Health service
Tone generation service
Media processing service
Download trace file
Download H.323 trace file
Submit
TRACE
LOG
TRACE
TRACE
Download saved trace file
Reset
3.20.3.18
USB Backup/Restore
Diagnostics > EasyTrace Profiles > USB backup/restore
USB backup/restore
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
Trace levels for components
Administration
Component registrar
Physical interface service
USB backup service
Download trace file
Download H.323 trace file
Submit
1048576
0
TRACE
TRACE
DEBUG
DEBUG
Download saved trace file
Reset
164
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
3.20.3.19
Web Based Management
Diagnostics > EasyTrace Profiles > Web based management
Web based management
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
1048576
0
Trace levels for components
Data Access service
OpenStage client management
Web server service
USB backup service
802.1x service
Voice recognition
Download trace file
Download H.323 trace file
Submit
TRACE
TRACE
TRACE
TRACE
TRACE
TRACE
Download saved trace file
Reset
3.20.3.20
802.1x problems
Diagnostics > EasyTrace Profiles > 802.1x problems
802.1x problems
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
Trace levels for components
1048576
0
Certificate management
Component registrar
Data Access service
Download trace file
Download H.323 trace file
Submit
LOG
TRACE
TRACE
Download saved trace file
Reset administration.fm
Administration
Diagnostics
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 165
administration.fm
Administration
Diagnostics
3.20.3.21
No Tracing for All Services
Diagnostics > EasyTrace Profiles > Clear all profiles
Clear all profiles
File size (Max 6290000 bytes)
Trace timeout (minutes)
Automatic clear before start
1048576
0
Trace levels for components
Administration
Call Log
Call View
Phonebook
Help
Application menu
Certificate management
Communications
Component registrar
CSTA service
Data Access service
Digit analysis service
Digital data service
Directory service
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
DLS client management
Health service
Instrumentation service
Journal service
Media control service
Media processing service
Mobility service
OBEX service
OpenStage client management
Performance Marks
Password management service
Physical interface service
Sidecar service
Tone generation service
Transport service
Voice engine service
Web server service
Application framework
Desktop
AGP Phonelet
Service framework
Service registry
HFA service agent vCard parser service
Voice mail
USB backup service
802.1x service
Voice recognition
H.323 messages
Clock service
Security Log Service
Media recording service
HTTP Service
Download trace file
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Download saved trace file
Download H.323 trace file
Submit Reset
166
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Diagnostics
3.20.4
QoS Reports
3.20.4.1
Conditions and Thresholds for Report Generation
> For details about the functionality, please refer to the Release Notes.
The generation of QoS (Quality of Service) reports which are sent to a QCU server (see Section
3.3.8, “SNMP”) is configured here.
Data required
•
Report mode
: Sets the conditions for generating a QoS report.
Value range:
• "OFF": No reports are generated.
• "EOS Threshold exceeded": Default value. A report is created if a) a telephone conversation longer than the Minimum session length has just ended, and b) a threshold value has been exceeded during the conversation.
• "EOR Threshold exceeded": A report is created if a) the report interval has just passed, and b) a threshold value has been exceeded during the observation interval.
• "EOS (End of Session)": A report is created if a telephone conversation longer than the Minimum session length has just ended.
• "EOR (End of Report Interval)": A report is created if the report interval has just passed.
•
Report interval (seconds)
: Time interval between the periodical observations.
Default: 60
•
Observation interval (seconds)
: During this time interval, the traffic is observed.
Value: 10
•
Minimum session length (100 millisecond units)
: When the Report mode is set to "EOS
Threshold exceeded" or "EOS (End of Session)", a report can be created only if the duration of the conversation exceeds this value.
Default: 20
•
Maximum jitter (milliseconds)
: When the jitter exceeds this value, a report is generated.
Default: 20
•
Average round trip delay (milliseconds)
: When the average round trip time exceeds this value, a report is generated.
Default: 100
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 167
administration.fm
Administration
Diagnostics
Non-compressing codecs:
The following threshold values apply to non-compressing codecs.
• Lost packets (per 1000 packets) : When the number of lost packets exceeds this maximum value during the observation interval, a report is created.
Default: 10.
• Consecutive lost packets : When the number of lost packets following one another exceeds this maximum value during the observation interval, a report is created.
Default: 2.
• Consecutive good packets : When the number of good packets following one another falls below this minimum value, a report is created.
Default: 8.
Compressing codecs:
The following threshold values apply to compressing codecs.
• Lost packets (per 1000 packets) : When the number of lost packets exceeds this maximum value during the observation interval, a report is created.
Default: 10.
• Consecutive lost packets : When the number of lost packets following one another exceeds this maximum value during the observation interval, a report is created.
Default: 2.
• Consecutive good packets : When the number of good packets following one another falls below this minimum value, a report is created.
Default: 8.
General:
• Resend last report : If checked, the previous report is sent once again on pressing Sub- mit . By default, this is unchecked.
The transmission of report data can be triggered manually by pressing Send now in the local menu.
168
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Administration via WBM
Diagnostics > QoS Reports > Generation
Generation
Report mode
Report interval (seconds)
Observation interval (seconds)
Minimum session length (100 millisecond units)
Codec independent threshold values
Maximum jitter (milliseconds)
Average round trip delay (milliseconds)
Non-compressing codec threshold values
Lost packets (per 1000 packets)
Consecutive lost packets
Consecutive good packets
Compressing codec threshold values
Lost packets (per 1000 packets)
Consecutive lost packets
Consecutive good packets
Resend last report
Submit
EOS Threshold exceeded
60
10
20
20
100
10
2
8
10
2
8
Reset
Administration via Local Phone
|
--Admin
|
--Network
|
--QoS
|
--Reports
|--Generation
| |--- Mode
| |--- Report interval
|
| |--- Observe interval
|
--- Minimum session length
|
|--- Send now
--Thresholds
|--- Maximum jitter
|--- Round-trip delay
|--Non-compressing:
|--...Lost packets (K)
|--...Lost consecutive
|--...Good consecutive
|--Compressing:
|--...Lost packets (K)
|--...Lost consecutive
|
--...Good consecutive
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual administration.fm
Administration
Diagnostics
169
administration.fm
Administration
Diagnostics
3.20.5
Miscellaneous
3.20.5.1
IP tests
For network diagnostics, the OpenScape Desk Phone IP phone can ping any host or network device to determine whether it is reachable.
Data required
• Pre Defined Ping tests : Pings a predefined IP address.
Value range: "Ping DLS", "Ping HiPath gatekeeper", "Ping standby HiPath gatekeeper"
• Ping tests : Pings the entered host’s IP address or hostname.
• Pre Defined Trace tests : Pings a predefined Traceroute IP address.
Value range: "Traceroute DLS", "Traceroute HiPath gatekeeper", "Traceroute standby Hi-
Path gatekeeper"
• Traceroute : Pings the entered host’s IP address or hostname.
Administration via WBM
IP tests
Pre Defined Ping tests
Ping DLS
Ping tests
Ping
Ping
Pre Defined Trace tests
Traceroute DLS
Traceroute
Traceroute
Traceroute
170
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Diagnostics
3.20.5.2
Memory Status Information
The processes currently running on the phone’s operating system as well as their CPU and memory usage can be monitored here. 100 processes are monitored on the web page. For further information, please refer to the manual of the "top" command for Unix/Linux systems, or to related documentation.
The amount of free memory is checked on a regular basis in order to prevent problems caused by low memory. This check determines whether a recovery is necessary.
When Disable reboot is checked, no reboot will take place when a memory problem has been found. However, recovery requires a reboot.
The recovery process will be triggered when the available main memory (RAM) falls below a given threshold value. As memory consumption is assumed to be higher during working hours, two thresholds are configurable. The High Threshold (MBs) parameter defines the threshold for off-time. For OpenScape Desk Phone IP 35G, the default value is 10 MB, and for Open-
Scape Desk Phone IP 55G, it is 30 MB. With Low Threshold (MBs), the threshold for off-time is defined. For OpenScape Desk Phone IP 35G, the default value is 8 MB, and for OpenScape
Desk Phone IP 55G, it is 20 MB.
The beginning and end of the working hours are defined in 24 hours format with Working Hour
Start (Default: 5) and Working Hour End (Default: 24).
When memory shortage has occured, information about the incident is written to a log file which can be viewed via the Download memory info file link. If there has been a previous case of memory shortage, the corresponding log file can be viewed via Download memory info file.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 171
administration.fm
Administration
Diagnostics
Administration via WBM
Diagnostics > Miscellaneous > Memory information
Memory information
Memory Monitor Configuration
Disable Reboot
High Threshold(MBs)
Low Threshold(MBs)
Working Hour Start
Working Hour End
Download memory info file
Submit
Device Memory Information
10
8
5
24
Download old memory info file
Reset
Mem: 111336K used, 12380K free, 0K shrd, 0K buff, 55084K cached
CPU: 5% usr 15% sys 5% nic 25% idle 0% io 0% irq 50% sirq
Load average: 0.14 0.13 0.09 1/196 6098
PID PPID USER STAT VSZ %MEM %CPU COMMAND
6098 1908 root R 1420 1% 40% /bin/busybox top -d 0 -a -n 1 -l 600 -b
1929 1877 root S 44712 36% 0% SvcConfig services.conf -startLogDaemon -logAll V3 R0.50.0 HFA 110924
2515 1877 root S 44712 36% 0% SvcConfig services.conf -startLogDaemon -logAll V3 R0.50.0 HFA 110924
1902 1877 root S 44712 36% 0% SvcConfig services.conf -startLogDaemon -logAll V3 R0.50.0 HFA 110924
2992 1877 root S 44712 36% 0% SvcConfig services.conf -startLogDaemon -logAll V3 R0.50.0 HFA 110924
1876 1855 root S 44712 36% 0% SvcConfig services.conf -startLogDaemon -logAll V3 R0.50.0 HFA 110924
1880 1877 root S 44712 36% 0% SvcConfig services.conf -startLogDaemon -logAll V3 R0.50.0 HFA 110924
2057 1877 root S 44712 36% 0% SvcConfig services.conf -startLogDaemon -logAll V3 R0.50.0 HFA 110924
1881 1877 root S 44712 36% 0% SvcConfig services.conf -startLogDaemon -logAll V3 R0.50.0 HFA 110924
2064 1877 root S < 44712 36% 0% SvcConfig services.conf -startLogDaemon -logAll V3 R0.50.0 HFA 110924
2058 1877 root S 44712 36% 0% SvcConfig services.conf -startLogDaemon -logAll V3 R0.50.0 HFA 110924
5400 1877 root S 44712 36% 0% SvcConfig services.conf -startLogDaemon -logAll V3 R0.50.0 HFA 110924
1886 1877 root S 44712 36% 0% SvcConfig services.conf -startLogDaemon -logAll V3 R0.50.0 HFA 110924
1885 1877 root S 44712 36% 0% SvcConfig services.conf -startLogDaemon -logAll V3 R0.50.0 HFA 110924
172
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
administration.fm
Administration
Diagnostics
3.20.5.3
Core dump
If Enable core dump is checked, a core dump will be initiated in case of a severe error. The core dump will be saved to a file. By default, this function is activated.
If Delete core dump is activated, the current core dump file is deleted on Submit. By default, this is not activated.
If one or more core dump file exist, hyperlinks for downloading will be created automatically.
Administration via WBM
Diagnostics > Miscellaneous > Core Dump
Core Dump
Enable core dump*
Delete core dump
;
*Changes to this item do not take effect until the phone is restarted
Download core.4567.gz
(date:27.05.2014 20:33:23)
Submit Reset
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 173
administration.fm
Administration
Diagnostics
3.20.6
Remote Tracing – Syslog
All trace messages created by the components of the phone software can be sent to a remote server using the syslog protocol. This is helpful especially for long-term observations with a greater number of phones.
To enable remote tracing, Remote trace status must be set to "Enabled". Furthermore, the IP address of the server receiving the syslog messages must be entered in Remote ip, and the corresponding server port must be given in Remote port.
Administration via Local Phone
|
---
Admin
|
---
Maintenance
|
---
Remote trace
|--- Remote trace status
|
|--- Remote ip
--- Remote port
Administration via WBM
Remote trace
Remote Trace Status
Use Notification
Remote Server
Remote Server Port
Submit
Disabled
Enabled
514
Reset
174
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
beispiele.fm
Examples and HowTos
Canonical Dialing
4 Examples and HowTos
4.1
Canonical Dialing
4.1.1
Canonical Dialing Settings
The following example shows settings suitable for the conversion of given dial strings to canonical format.
Parameter
Local country code
National prefix digit
Local national code
Minimum local number length
Local enterprise node
PSTN access code
Operator codes
Emergency numbers
Initial extension digits
Example value Explanation
44 International country code for the UK.
0
115
7
Used in front of national codes when dialled without international prefix.
Area code within the UK (here: Nottingham).
780
Number of digits in a local PSTN number (e. g.
3335333 = 7 digits).
Prefix to access Nottingham numbers from within the company network.
9
0, 7800
Prefix to make an international call in the UK.
Set of numbers to access the local operators.
999, 555 Set of numbers to access emergency services.
2, 3, 4, 5, 6, 8 1 st
digits of numbers that are used for extension numbers on the local node.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 175
beispiele.fm
Examples and HowTos
Canonical Dialing
4.1.2
Canonical Dial Lookup
The following example shows settings suitable for recognizing incoming numbers and assigning them to entries in the local phone book, and for generating correct dial strings from phone book entries, depending on whether the number is internal or external.
Parameter
Local code <1>
International code <1>
Local code <2>
International code <2>
Example value Explanation
780 Enterprise node prefix (here: Nottingham).
+44115943
722
+4989722
Equivalent prefix to access numbers on this node from the PSTN. Here, the prefix used by the PSTN (DID/DDI: direct inward dialing) is
943, which differs from the enterprise node prefix used within the enterprise network.
Enterprise node prefix (here: Munich).
Equivalent prefix to access numbers on this node from the PSTN. Here, the prefix used by the PSTN for direct inward dialing is identical to the enterprise node prefix.
176
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
beispiele.fm
Examples and HowTos
Canonical Dialing
4.1.2.1
Conversion examples
In the following examples, numbers entered into the local phonebook by the user are converted according to the settings given above.
Example 1: Internal number, same node as the local phone
User entry
External numbers
External access code
International gateway code
Number stored in the phone book
Dial string sent when dialing from the phone book
Internal numbers = Local enterprise form
Internal numbers = Always add node
Internal numbers = Use external numbers
Example 2: Internal number, different node
User entry
External numbers
External access code
International gateway code
Number stored in the phone book
Dial string sent when dialing from the phone book
Internal numbers = Local enterprise form
Internal numbers = Always add node
Internal numbers = Use external numbers
2345
Local public form
Not required
Use national code
+441159432345
1234
7802345
9432345
7222345
Local public form
Not required
Use national code
+49897222345
2345
7802345
9432345
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 177
beispiele.fm
Examples and HowTos
Canonical Dialing
Example 3: External number, same local national code as the local phone
User entry
External numbers
External access code
International gateway code
Number stored in the phone book
Dial string sent when dialing from the phone book
External numbers = Local public form
External numbers = National public form
External numbers = International form
011511234567
Local public form
Not required
Use national code
+4411511234567
234567
011511234567
004411511234567
178
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
beispiele.fm
Examples and HowTos
How to Create Logo Files for OpenScape Desk Phone
4.2
How to Create Logo Files for OpenScape Desk Phone
4.2.1
For OpenScape Desk Phone IP 55G
In the following, the creation of a transparent image suitable for use as a logo in OpenScape
Desk Phone IP 55G is described. This description is based on Adobe Photoshop, but any similar graphics software can be used as well.
> INFO:
Because of performance issues, half transparency in the alpha channel of the PNG files is not allowed on OpenScape phones. Therefore only 100% transparency or no transparency is used in the phone’s UI elements.
1. Select the Background Color
For production purposes, we set the background color to the background color of the skin currently selected on the phone. Later, the background color will be replaced by transparency, which facilitates placing a logo on a gradient background. The following table lists the hexadecimal values, as used in HTML:
Phone Type Skin Color Code
OpenScape Desk Phone IP 55G Silver Blue
OpenScape Desk Phone IP 55G Anthracite Orange
#E7E7E7
#424242
1
1 The background color on OpenScape Desk Phone IP 55G - skin 1 is a gradient; the colour listed here is an average value.
Adobe Photoshop:
Click on the Background Color icon on the Color palette group, then type the color code without leading "#" into the # field)
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 179
beispiele.fm
Examples and HowTos
How to Create Logo Files for OpenScape Desk Phone
2.
Create a New Image
Create an image with the size according to the phone type:
Phone Type
OpenScape Desk Phone IP 55G
Adobe Photoshop:
Size (px)
240 x 70
3.
Insert the Logo
Place the logo image on the background, e.g. by copying it from a source file.
Adobe Photoshop Example:
4.
Merge Layers
Merge the two layers to one.
Adobe Photoshop:
In the Panel, select both the background layer and the new layer containing the inserted logo. Afterwards, go to Layer in the Menu bar, and select Merge Layers.
180
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
beispiele.fm
Examples and HowTos
How to Create Logo Files for OpenScape Desk Phone
5.
Background Transparency
Delete the background colour so that only the exact former background colour is 100% transparent.
Adobe Photoshop:
Make sure that the background color is selected by clicking on the Background Color icon.
In the Tool palette, click on the Eraser symbol with the right Mouse button and select the
Magic Eraser Tool . After this, got to the Menu bar and set the Tolerance field to "0".
6.
Save the Image
Finally, save the image in PNG format. You can now upload the logo file to the phone as de-
scribed in Section 3.9.6, “Logo”
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 181
beispiele.fm
Examples and HowTos
How to Set Up the Corporate Phonebook (LDAP)
4.3
How to Set Up the Corporate Phonebook (LDAP)
The Corporate Phonebook function is based on an LDAP client that can be connected to the company’s LDAP service. A variety of LDAP servers can be used, for instance Microsoft Active
Directory, OpenLDAP, or Apache Directory Server.
4.3.1
Prerequisites
1. An LDAP server is present and accessible to the phone’s network. The standard port for
LDAP is 389.
2. Query access to the LDAP server must be provided. Unless anonymous access is used, a user name and password must be provided. It might be feasible to use a single login/password for all OpenStage Desk Phones.
3. To enable dialing internal numbers from the corporate phonebook, an LDAP entry must be provided that contains the proper number format required by the HiPath system.
In Microsoft Active Directory, the standard LDAP attribute telephone Number is typically populated as follows: +1<area code><call number>. However, in a standard configuration,
OpenScape Voice will not handle this dial string correctly, due to the +1 prefix. Therefore, it is recommended to use the ipPhone field, which is typically unused in Active Directory. It can be found in the Telephones tab of the Active Directory User Manager.
182
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
beispiele.fm
Examples and HowTos
How to Set Up the Corporate Phonebook (LDAP)
4.3.2
Create an LDAP Template
The user interface of the corporate phonebook application provides a form which is used both for search and retrieval.
The task of an LDAP template is to map the phone’s search and display fields to LDAP attributes that can be delivered by the server. In the LDAP template, the fields are represented by hard-coded names: ATTRIB01, ATTRIB02, and so on. These field names are assigned to
LDAP attributes, as appropriate.
The following examples show the relations between GUI field names, the attribute labels used in the template, and exemplary mappings to LDAP attributes.
> INFO:
In an LDAP template, the entries must be sorted according to the sequential number of the template labels, as shown in the example underneath. It is also recommended to use pre-sorted entries, which will reduce the use of resources.
Generic Example (Standard Attributes)
OpenStage Field LDAP
Template
Lables
Last name
ATTRIB01
LDAP Attribute sn
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Example
Value
Doe
183
beispiele.fm
Examples and HowTos
How to Set Up the Corporate Phonebook (LDAP)
OpenStage Field LDAP
Template
Lables
First name
Business 1
ATTRIB02
ATTRIB03
LDAP Attribute givenName telephoneNumber
Business 2
Mobile
Private
Company
ATTRIB04
ATTRIB05
ATTRIB06
ATTRIB07 facsimileTelephoneNumber mobile homePhone o
Example
Value
John
9991234
9992345
017711223344
441274333444
Example Inc.
Address 1
Address 2
Job function
ATTRIB08
ATTRIB09
ATTRIB10
ATTRIB11 departmentNumber title mail
0815
Product Manager [email protected]
Given "example.com" as the LDAP subtree to be searched, the LDAP template file looks like this:
OpenStage LDAP TEMPLATE (v.1)
SEARCHBASE="dc=example,dc=com"
ATTRIB01="sn"
ATTRIB02="givenname"
ATTRIB03="telephoneNumber"
ATTRIB04="facsimileTelephoneNumber"
ATTRIB05="mobile"
ATTRIB06="homePhone"
ATTRIB07="o"
ATTRIB08="departmentNumber"
ATTRIB09=""
ATTRIB10="title"
ATTRIB11="mail"
EOF
Microsoft Active Directory Specific Example
OpenStage Field LDAP
Template
Attribute
Last name
ATTRIB01
LDAP Attribute sn
First name
ATTRIB02 givenName
184
Example
Value
Doe
John
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
beispiele.fm
Examples and HowTos
How to Set Up the Corporate Phonebook (LDAP)
OpenStage Field LDAP
Template
Attribute
Business 1
Business 2
ATTRIB03
ATTRIB04
LDAP Attribute ipPhone otherTelephone
Mobile
Private
Company
Address 1
ATTRIB05
ATTRIB06
ATTRIB07
ATTRIB08 mobile homePhone company department
Address 2
Job function
ATTRIB09
ATTRIB10
ATTRIB11 title mail
Example
Value
9991234
9992345
017711223344
441274333444
Example Inc.
Administration
Product Manager [email protected]
Given "example.com" as the LDAP subtree to be searched, the LDAP template file looks like this:
OpenStage LDAP TEMPLATE (v.1)
SEARCHBASE="dc=example,dc=com"
ATTRIB01="sn"
ATTRIB02="givenname"
ATTRIB03="ipPhone"
ATTRIB04="otherTelephone"
ATTRIB05="mobile"
ATTRIB06="homePhone"
ATTRIB07="company"
ATTRIB08="department"
ATTRIB09=""
ATTRIB10="title"
ATTRIB11="mail"
EOF
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 185
beispiele.fm
Examples and HowTos
How to Set Up the Corporate Phonebook (LDAP)
4.3.3
How to Load the LDAP Template into the Phone
When you have configured the LDAP template, you can upload it to the phone:
1. Save the template under a suitable name, for example, ldap-template.txt.
2. Copy the template file to the FTP server designated for deploying LDAP templates.
3. Upload the file using the WBM (see Section 3.9.5, “LDAP Template”), or, alternatively, the
Local menu, or the DLS (see the Deployment Service Administration Manual). For an example configuration, see the following WBM screenshot (WBM path: File transfer >
LDAP):
LDAP
Use defaults
Download method
FTP Server address
FTP Server port
FTP account
FTP
21
FTP username
FTP password
FTP path
HTTPS base URL
Filename
After submit do nothing
Submit Reset
186
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
beispiele.fm
Examples and HowTos
How to Set Up the Corporate Phonebook (LDAP)
4.3.4
Configure LDAP Access
To enter the access data using the WBM, take the following steps:
1. Navigate to Local Functions > Directory Settings.
2. Enter the following parameters:
• Server address (IP address or hostname of the LDAP server)
• Server port (port used by the LDAP, typically 389)
• Authentication (authentication method for the connection to the LDAP server)
• User name (only required if simple authentication is selected); Password (relating to the user name).
Directory settings
LDAP Server address
LDAP Server port
Authentication
User Name
Password
Search trigger timeout
Submit
389
Anonymous
Reset
3
3. Press Submit.
4.3.5
Test
If everything went well, you can run a test query on your OpenStage Desk Phone.
1. To navigate to the phone’s corporate phonebook, press the Directory button twice.
2. Press Directory key. In the context menu, select Find by pressing >.
3. In the query mask, select the entry to be searched, for instance Last Name. Press > to open the onscreen keypad for text input.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 187
beispiele.fm
Examples and HowTos
How to Set Up the Corporate Phonebook (LDAP)
4. Enter the text to be searched. For information on using the onscreen keypad, see Section
3.1, “Access via Local Phone”, step 5.
5. Navigate to the Find option and press >. If the query was successful, at least one entry will be listed in the following manner:
188
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
beispiele.fm
Examples and HowTos
How to Set Up the Corporate Phonebook (LDAP)
6. Navigate to the desired entry and press > to open the context menu. You can select one of the following options:
• Dial the Business 1 number.
• Dial the Mobile number.
• Have the entry’s details, that is, all attributes displayed.
• Start a new search.
• Clear the list of search results.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 189
beispiele.fm
Examples and HowTos
An LLDP-Med Example
4.4
An LLDP-Med Example
The following example illustrates the mode of operation of LLDP-MED. In order to evoke a reaction from LLDP-MED, the LAN switch has been set to auto-negotiation, whereas the phone’s
LAN port (see Section 3.2.1, “LAN Port Settings”) is set to 100Mbit/s, hence a fixed value. This
configuration error is detected and displayed by LLDPMED. Please note the status of
MAC_Phy config displayed in the local phone´s Admin menu.
1. Log in as administrator on the local phone´s Admin menu.
2. In the Admin menu, navigate to Network > LLDP-MED Operation using the navigation keys, and click OK.
3. In the LLDP-MED Operation submenu (see LLDP-MED Operation), navigate to MAC_Phy config and note the status displayed:
MAC_Phy config - Error
4. Select the MAC_Phy config submenu by pressing OK and navigate to the parameters displayed by using the navigation keys.
The following status is displayed for the MAC_Phy config parameters:
AutoSet enabled = Incompatible
MAU = Incompatible
190
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
beispiele.fm
Examples and HowTos
An LLDP-Med Example
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 191
referenz.fm
Technical Reference
Default Port List
5 Technical Reference
5.1
Default Port List
The following table contains all default ports, resp. port ranges, and protocols used by the services running on OpenScape Desk Phone IP HFA phones.
Service
Payload transport (VoIP)
Payload transport (VoIP)
TCP is used
TLS is used
XML applications in phone, connecting to an application server
XML Push service
XML Push service
Server Default
Port
5010 - 5059
4061
---
Directory access via LDAP
DLS contact me service - workpoint side
Default communication with the DLS workpoint interface
Secure communication with the DLS workpoint interface
---
---
8085
443
---
8085
Client Default
Port
5010 - 5059
5010 - 5059 5010 - 5059
4060 32786 - 61000
32786 - 61000
32786 - 61000
---
---
32786 - 61000
---
18443
18444
21 32786 - 61000 Connection to the control port of
FTP server
FTP client; uses the FTP server in active mode
HTTPS file download server
32786 - 61000 20
443 32786 - 61000
Web server for WBM access
Secure Web Server for WBM access
OpenStage Phone Manager
8085
443
65532
HPT- debug IF (Available only if a dongle file is present on phone.)
65532
SSH (Secure Shell Remote Login) 22
---
---
---
---
Protocol Stack
RTP - RTCP
SRTP - SRTCP
HFA / TCP
HFA / TLS
HTTP / TCP
HTTPS / TCP-TLS
HTTP / TCP
HTTPS / TCP-TLS
TCP
HTTP / TCP
HTTPS / TCP -
SSL / TLS
HTTPS / TCP -
SSL / TLS
FTP / TCP
FTP / TCP
HTTPS / TCP -
SSL/TLS
HTTP / TCP
HTTPS / TCP -
SSL / TLS
TCP - SSL/TLS
TCP - SSL/TLS
192
--TCP
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
referenz.fm
Technical Reference
Troubleshooting: Error Codes
5.2
Troubleshooting: Error Codes
For a set of error cases, specific error codes are defined. These error codes are shown in brackets on the display, following a general error note. Example: „No Telephony possible
(LP1)“.
Problem
Network Problem
Description
No network connection
Not Initialised Waiting for data
Unable to use LAN 802.1x error
Unable to use LAN Physical connection missing
Unable to Register Server timeout
Unable to Register Server failed
Unable to Register Authentication failed
Unable to Register No number configured
Unable to Register No server configured
Unable to Register No registrar configured
Unable to Register No DNS domain configured
Unable to Register Rejected by server
Unable to Register No phone IP address set
Survivability
Survivability
Backup route active
Backup not configured
Survivability
Survivability
Cloud-Deployment abandoned by user
Backup timeout
Backup authentication failed
Cloud-Deployment abandoned by user
Occurs when the pin prompt is dismissed
RN2
RS2
RG2
RD2
RR2
RI2
B8
RS8
Error code
LI1
I1
LX1
LP1
RT2
RF2
RA2
RT8
RA8
AU
Tabelle 5-1 Troubleshooting Error Codes
> A special “fast-busy” tone (also called congestion tone) is played if a temporary network problem causes a user-initiated call action to fail. Typical call actions: making an outgoing call; picking up a call from Manual Hold; or Group pickup. Phone users and mobile users logged on to the phone. The special tone is triggered if one of the following SIP response codes is received from the server:
606, 408, or 503.
http://wiki.unify.com/wiki/OpenStage_SIP_FAQ#Error_codes
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 193
referenz.fm
Technical Reference
Troubleshooting: Error Codes
194
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
referenz.fm
Technical Reference
Troubleshooting: Error Messages
5.3
Troubleshooting: Error Messages
The following table lists the possible error messages for OpenScape HFA phones and provides possible causes and explanations, where applicable.
Error Message
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
Table 5-2
Error Code Error Condition Error Cause
D02 Unable to contact DHCP
H[2 Unable to register HFA main line
Logoff: Forced client logoff due to an incorrect PreSharedSecret
H02 General Error
H12
H22
H32
Unable to register HFA main line
Unable to register HFA main line
Unable to register HFA main line
Unable to register HFA main line
No IP address
No default route
No mask
No gateway IP address H42
H52
H62
Ha2
Unable to register HFA main line
Unable to register HFA main line
Unable to register HFA main line
Unable to register HFA main line
HA2 Unable to register HFA main line
Hb2 Unable to register HFA main line
HB2 Unable to register HFA main line
Hc2 Unable to register HFA main line
No subscriber number
Tc-logon timeout
Logon: Rejected due to missing LIN
Logon: Maintenance busy
Logon: Rejected due to invalid LIN
Logon: No port available
Logon: Rejected due to mobile terminal blokked
Error Messages
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 195
referenz.fm
Technical Reference
Troubleshooting: Error Messages
Error Message
No Telephony possible
No Telephony possible
No Telephony possible
Error Code Error Condition
Hd2 Unable to register HFA main line
HD2 Unable to register HFA main line
He2 Unable to register HFA main line
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
Table 5-2 Error Messages
HE2 Unable to register HFA main line
HF2 Unable to register HFA main line
HG2 Unable to register HFA main line
HH2 Unable to register HFA main line
HI2 Unable to register HFA main line
HJ2 Unable to register HFA main line
HK2 Unable to register HFA main line
HL2 Unable to register HFA main line
HM2 Unable to register HFA main line
HN2 Unable to register HFA main line
HQ2 Unable to register HFA main line
HR2 Unable to register HFA main line
HS2 Unable to register HFA main line
Error Cause
Logon: Rejected due to incompatible security profile
Logon: No port ext available
Logon: Rejected due to
TCP usage while TLS is required
Logon: Client not registered
Logon: Rejected due to
Logoff
Logon: Rejected due to
Logoff progress
Logon: Rejected due to
Shutdown
Logon: Rejected due to duplicate Logon
Logon: Rejected due to already logged on
Logon: Rejected due to
PIN not present
Logon: Rejected due to password not present
Logon: Rejected due to password not correct
Logon: Rejected due to invalid license
Logoff: Normal Logoff
Logoff: Client not logged on
Logoff: Client logged off
196
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
referenz.fm
Technical Reference
Troubleshooting: Error Messages
Error Message
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
No Telephony possible
Error Code Error Condition
HT2 Unable to register HFA main line
HU2 Unable to register HFA main line
Reduced Telephony functions
Table 5-2 Error Messages
Error Cause
Logoff: Forced client logoff
Logoff: Timeout expired
HV2 Unable to register HFA main line
HW2
HX2
HY2
Unable to register HFA main line
Unable to register HFA main line
Unable to register HFA main line
Logoff: OMCaction
Logoff: HFA mobile user logged on
Logoff: Switch back to central system
Logoff: No bearer channel
Logoff: New logon requested from the server
HZ2 Unable to register HFA main line
IR1 received
IS1
LP1 Unable to use the LAN Physical Connection
LX1
RA2
Unable to use the LAN 802.1x errors
Unable to register main line
Authentication failed
To PC TP2 Unable to establish a TLS connection
TT2 Unable to establish a TLS connection
No SNTP server
M3 Unable to contact the DLS for mobility logon
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 197
bkglos.fm
Glossary
Glossary
6
A
ADPCM
A daptive Differential Pulse Code Modulation. A compressed encoding method for audio
signals which are to be transmitted by a low bandwidth. As opposed to regular -> PCM, a
sample is coded as the difference between its predicted value and its real value. As this difference is usually smaller than the real, absolute value itself, a lesser number of bits can be used to encode it.
C
CSTA
C omputer Supported Telecommunications Applications. An abstraction layer for telecom-
munications applications allowing for the interaction of -> CTI computer applications with
telephony devices and networks.
CTI
C omputer Telephony Integration. This term denotes the interaction of computer applications with telephony devices and networks.
D
DFT
D igital Feature Telephone. A phone with no line keys.
DHCP
D ynamic Host Configuration Protocol. Allows for the automatic configuration of network endpoints, like IP Phones and IP Clients.
DiffServ
Diff erentiated Services. Specifies a layer 3 mechanism for classifying and managing net-
work traffic and providing quality of service (-> QoS) guarantees on -> IP networks. Diff-
Serv can be used to provide low-latency, guaranteed service for e. g. voice communication.
DLS
The Deployment Service (DLS) is a OpenScape management application for the administration of workpoints, i. e. IP Phones and IP Clients, in both HiPath- and non-HiPath networks.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 198
bkglos.fm
Glossary
DNS
D omain Name System. Performs the translation of network domain names and computer
DPIP55G or DPIP35G
Stands for OpenScape Desk Phone IP 55G or OpenScape Desk Phone IP 35G
DTMF
D ual Tone Multi Frequency. A means of signaling between a phone and e. g. a voicemail facility. The signals can be transmitted either in-band, i. e. within the speech band, or outband, i. e. in a separate signaling channel.
E
EAP
E xtensible Authentication Protocol. An authentication framework that is frequently used in
WLAN networks. It is defined in RFC 3748.
F
FTP
F ile Transfer Protocol. Used for transferring files in networks, e. g., to update telephone software.
G
G.711
ITU-T standard for audio encoding, used in ISDN and -> VoIP. It requires a 64 kBit/s band-
width.
G.722
ITU-T standard for audio encoding using split band -> ADPCM. The audio bandwidth is 7
kHz at a sampling rate of 16 kHz. There are several transfer rates ranging from 32 to 64 kBit/s, which correspond to different compression degrees. The voice quality is very good.
G.729
ITU-T standard for audio encoding with low bandwidth requirements, mostly used in VoIP.
The standard bitrate is 8 kBit/s. Music or tones such as -> DTMF or fax tones cannot be
transported reliably with this codec.
Gateway
Mediation components between two different network types, e. g., -> IP network and ISDN
network.
199
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
bkglos.fm
Glossary
H
HTTP
H
ypertext Transfer Protocol. A standard protocol for data transfer in -> IP networks.
I
IP
I nternet Protocol. A data-oriented network layer protocol used for transferring data across a packet-switched internetwork. Within this network layer, reliability is not guaranteed.
IP address
The unique address of a terminal device in the network. It consists of four number blocks of 0 to 255 each, separated by a point.
J
Jitter
Latency fluctuations in the data transmission resulting in distorted sound.
L
LAN
L ocal Area Network. A computer network covering a local area, like an office, or group of buildings.
Layer 2
2nd layer (Data Link Layer) of the 7-layer OSI model for describing data transmission interfaces.
Layer 3
3rd layer (Network Layer) of the 7-layer OSI model for describing the data transmission interfaces.
LCD
L iquid Crystal Display. Display of numbers, text or graphics with the help of liquid crystal technology.
LDAP
L ightweight Directory Access Protocol. Simplified protocol for accessing standardized directory systems, e.g., a company telephone directory.
LED
L ight Emitting Diode. Cold light illumination in different colours at low power consumption.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 200
bkglos.fm
Glossary
M
MAC Address
M edia Access Control address. Unique 48-bit identifier attached to network adapters.
MDI-X
M edia Dependent Interface crossover (X). The send and receive pins are inverted. This
MDI allows the connection of two endpoints without using a crossover cable. When Auto
MDI-X is available, the MDI can switch between regular MDI and MDI-X automatically, depending on the connected device.
MIB
M anagement Information Base. A type of database used to manage the devices in a communications network.
MWI
M essage Waiting Indicator. A signal, typically a LED, to notify the user that new mailbox messages have arrived.
P
PBX
P rivate Branch Exchange. Private telephone system that connects the internal devices to each other and to the ISDN network.
PCM
P ulse Code Modulation. A digital representation of an analog signal, e. g. audio data, which consists of quantized samples taken in regular time intervals.
PING
P acket Internet Gro(u)per. A program to test whether a connection can be made to a defined IP target. Data is sent to the target and returned from there during the test.
PoE
P ower over Ethernet. The IEEE 802.3af standard specifies how to supply power to compliant devices over Ethernet cabling (10/100Base-T).
Port
Ports are used in -> IP networks to permit several communication connections simulta-
neously. Different services often have different port numbers.
PSTN
P ublic Switched Telephone Network. The network of the world's public circuit-switched telephone networks.
201
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
bkglos.fm
Glossary
Q
QoS
Q uality of Service. The term refers to control mechanisms that can provide different priority to different users or data flows, or guarantee a certain level of performance to a data flow in accordance with requests from the application program. The OpenScape Desk Phone phone allows for the setting of QoS parameters on layer 2 and layer 3 (DiffServ).
R
RAM
R andom Access Memory. Memory with read / write access.
ROM
R ead Only Memory. Memory with read only access.
RTCP
R
ealtime Transport Control Protocol. Controls the -> RTP stream and provides information
about the status of the transmission, like QoS parameters.
RTP
R ealtime Transport Protocol. This application layer protocol has been designed for audio communication.
S
SDP
S ession Description Protocol. Describes and initiates multimedia sessions, like web con-
ferences. The informations provided by SDP can be processed by -> SNMP.
SNMP
S imple Network Management Protocol. Used for monitoring, controlling, and administration of network and network devices.
SNTP
S imple Network Time Protocol. Used to synchronize the time of a terminal device with a timeserver.
Subnet Mask
To discern the network part from the host part of an -> IP address, a device performs an
AND operation on the IP address and the network mask. The network classes A, B, and C each have a subnet mask that demasks the relevant bits: 255.0.0.0 for Class A,
255.255.0.0 for Class B and 255.255.255.0 for Class C. In a Class C network, for instance,
254 IP addresses are available.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 202
bkglos.fm
Glossary
Switch
Network device that connects multiple network segments and terminal devices. The for-
warding of data packets is based on -> MAC Addresses: data targeted to a specific device
is directed to the switch port that device is attached to.
T
TCP
T ransfer Control Protocol. The protocol belongs to the transport layer and establishes a connection between two entities on the application layer. It guarantees reliable and in-order delivery of data from sender to receiver.
TLS
T ransport Layer Security. Ensures privacy between communicating applications. Typically, the server is authenticated, but mutual authentication is also possible.
U
URI
U niform Resource Identifier. A compact string of characters used to identify or name a resource.
URL
U
niform Resource Locator. A special type of -> URI which provides means of acting upon
or obtaining a representation of the resource by describing its primary access mechanism or network location.
V
VLAN
V irtual Local Area Network. A method of creating several independent logical networks within a physical network. For example, an existing network can be separated into a data and a voice VLAN.
VoIP
V oice over IP. A term for the protocols and technologies enabling the routing of voice con-
versations over the internet or through any other -> IP-based network
W
WAP
W ireless Application Protocol. A collection of protocols and technologies aiming at enabling access to internet applications for wireless devices. WAP can also be used by the
OpenScape Desk Phone phone.
203
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
bkglos.fm
Glossary
WBM
W eb Based Management. A web interface which enables configuration of the device using a standard web browser.
WML
W ireless Markup Language. An XML-based markup language which supports text,
graphics, hyperlinks and forms on a -> WAP-browser.
WSP
W
ireless Session Protocol. The protocol is a part of the -> WAP specification. Its task is to
establish a session between the terminal device and the WAP gateway.
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual 204
OperaAdminSIX.fm
Index Nur für den internen Gebrauch
Index
7
A
Administration Menu (Local Menu) 3-42
Application
C
D
DLS (Deployment Service) 1-13, 2-31, 3-64,
DST Zone (Daylight Saving Time Zone) 3-80
E
206
No Tracing for All Services 3-166
Server based applications 3-163
F
Fault Trace Configuration 3-150
G
H
I
International Code (Local Country Code) 3-
International Gateway Code 3-87
International Prefix (International Access Code) 3-85
IP
Address (Manual configuration) 3-57
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
Nur für den internen Gebrauch
OperaAdminSIX.fm
Index
L
LDAP Template (Download) 3-106
Local Country Code (International Code) 3-
Local National Code (Local Area Code) 3-85
M
MWI (Message Waiting Indicator) 6-202
N
National Prefix (Trunk Prefix) 3-85
Network port configuration 3-46
O
P
Password
Phone
Phone software (Download) 3-100
Picture Clips (Download) 3-103
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
PoE (Power over Ethernet) 2-17, 6-202
Q
R
S
SSH – Secure Shell Access 3-145
Subnet Mask (Manual configuration) 3-57
T
U
V
Vendor Class (DHCP) 2-23, 2-31
207
OperaAdminSIX.fm
Index
W
WBM (Web Based Management) 1-13, 2-20,
X
XML ApplicationsApplications
Nur für den internen Gebrauch
208
A31003-D3030-M100-02-76A9, 07/2014
OpenScape Desk Phone IP, Administration Manual
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Touchscreen Interface for Intuitive Control
- Power over Ethernet (PoE) for Convenient Power Management
- HD Voice Support for Crystal-Clear Audio
- Gigabit Ethernet Connectivity for Fast Data Transfer
- DECT Wireless Headset Connection for Hands-Free Communication
- Built-in Bluetooth for Wireless Connectivity
- Integrated Answering Machine
- Multiple Programmable Keys for Quick Access to Functions
- Company Directory Integration for Seamless Communication