Fujitsu ESPRIMO P2760 Operating Manual

Add to My manuals
52 Pages

advertisement

Fujitsu ESPRIMO P2760 Operating Manual | Manualzz
Operating Manual
ESPRIMO P15xx / P2440 / P2540
ESPRIMO P2550 / P2560
ESPRIMO P2760 / P352x
System
Congratulations, you have decided to buy an
innovative Fujitsu product.
The latest information about our products, useful tips, updates etc. is available
from our website: "http://ts.fujitsu.com"
For automatic driver updates, go to: "http://support.ts.fujitsu.com/com/support/index.html"
Should you have any technical questions, please contact:
•
our Hotline/Service Desk
(see Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html")
• Your sales partner
• Your sales office
We hope you really enjoy using your new Fujitsu system.
Copyright
Fujitsu Technology Solutions 2010 03/10
Published by
Fujitsu Technology Solutions GmbH
Mies-van-der-Rohe-Straße 8
80807 Munich, Germany
Contact
http://ts.fujitsu.com/support
All rights reserved, including intellectual property rights. Technical data subject to modifications and delivery subject to
availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be
trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may
infringe the rights of such owner. You will find more information at "http://ts.fujitsu.com/terms_of_use.html"
Order No. Fujitsu Technology Solutions GmbH: A26361-K1005-Z220-1-7619, edition 4
ESPRIMO P15xx / P2440 / P2540
ESPRIMO P2550 / P2560
ESPRIMO P2760 / P352x
Operating Manual
Your Esprimo P...
5
Important notes
7
Getting started
11
Operation
19
Troubleshooting and tips
25
System expansions
30
Index
46
ESPRIMO is a registered trademark of Fujitsu Technology Solutions GmbH.
Windows 7, Windows Vista and Windows XP are registered trademarks of Microsoft Corporation.
PS/2 is a registered trademark of International Business Machines, Inc.
Pentium is a registered trademark of Intel Corporation, USA.
Kensington and MicroSaver are registered trademarks of ACCO World Corporation.
All other trademarks referenced are trademarks or registered trademarks of their
respective owners, whose protected rights are acknowledged.
Copyright © Fujitsu Technology Solutions GmbH 2010
All rights reserved, including rights of translation, reproduction by printing, copying
or similar methods, either in part or in whole.
Noncompliance is subject to compensation for damages.
All rights reserved, including rights created by patent grant or registration of a utility model or design.
Subject to availability and technical modifications.
Contents
Contents
Your Esprimo P... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
6
Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transporting the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Energy saving, disposal and recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CE marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FCC Class B Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
7
7
8
8
9
10
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unpacking and checking the delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steps for initial setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disconnecting the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ports on the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting a monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting external devices to the serial interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting external devices to the USB ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the device to the mains supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching on for the first time: installing the software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching on monitor and device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
11
11
12
13
13
13
14
15
15
15
16
16
17
17
18
18
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switch the device on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching off the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Indicators on the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important keys and keyboard shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Settings in BIOS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Property and data protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Anti-theft protection and lead-sealing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BIOS setup security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Access authorisation via SmartCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
19
19
20
21
21
22
23
23
24
24
Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Help if problems occur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power indicator remains off after you have switched on your device . . . . . . . . . . . . . . . . . . . . .
The device cannot be switched off with the ON/OFF switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monitor remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No mouse pointer displayed on the screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The floppy disk cannot be read or written . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Time and/or date is not correct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error messages on the screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing new software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25
25
25
25
26
26
28
28
28
29
29
Fujitsu Technology Solutions
3
Contents
Restoring hard disk contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
29
System expansions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Information about boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Opening the casing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Closing the casing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing and removing a board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Board installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Board removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing and removing drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing and installing accessible drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing and removing the hard disk drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mainboard expansions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Upgrading main memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Processor, replacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing the lithium battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30
31
32
33
34
34
36
38
38
42
43
43
43
44
45
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
46
4
Fujitsu Technology Solutions
Your Esprimo P...
Your Esprimo P...
Overview
... is available in various configurations that differ in terms of hardware and software. You can
incorporate accessible drives (for example a DVD drive) as well as other modules.
This manual tells you how to start using your device and how to operate it in daily use. This manual
applies for all configuration levels. Depending on the chosen configuration level, some of the
hardware components described may not be available on your PC. The illustrations shown below
may differ slightly from your actual model. Please also read the notes about your operating system.
Depending on the configuration selected, the operating system is preinstalled
on your hard disk (e.g. Windows 7).
Your device has a number of security features to ensure that no unauthorised persons can access
your data. The security functions in the BIOS Setup also allow you to protect your data by means of
passwords. In addition, systems with a SmartCard reader offer additional protection.
DeskUpdate allows you under some operating systems to easily and quickly install the latest
drivers and operating system extensions with a few mouse clicks.
DeskUpdate is contained on the "Drivers & Utilities " DVD. Further information on this device is provided:
•
•
•
•
•
•
•
in
in
in
in
in
in
in
the poster "Getting Started"
the "Safety" manual
the "Warranty" manual
the operating manual for the monitor
the manual for the mainboard
your operating system documentation
the information files (e.g. *.PDF, *.HTML, *.DOC, *.CHM, *.TXT, *.HLP)
Some of the manuals listed can be found in electronic form on the "Drivers & Utilities" DVD.
You can access and view the required information using the Acrobat Reader
program, which is also included on the DVD. You can of course also
print out a copy of the manual if you prefer.
Fujitsu Technology Solutions
5
Your Esprimo P...
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►
Indicates an activity that must be performed
Indicates a result
This font
indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
indicates
"This font"
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
indicates
This font
This font
•
•
Key
This font
6
cross-references to another section, e.g. "Safety information"
cross-references to an external source, e.g. a web address: For more
information, go to "http://ts.fujitsu.com"
• Names of CDs, DVDs and titles or designations of other materials, e.g.:
"CD/DVD Drivers & Utilities" or "Safety" Manual
indicates a key on the keyboard, e.g: F10
indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
Fujitsu Technology Solutions
Important notes
Important notes
Notes
Importantnotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety information
Note
Safetyinformation
Pay attention to the information provided in the "Safety" manual
and in the following safety notes.
When installing and operating the device, please observe the notes on
environmental conditions in Chapter "Technical specification", Page 45 as well
as the instructions in Chapter "Getting started", Page 11.
When setting up the device, make sure there is clearance all around it so that
the casing receives enough ventilation. In order to avoid overheating, do not
cover the ventilation areas of the monitor or the device.
You must only operate the device if the rated voltage used by the
device is set to the local mains voltage.
Check the rated voltage set for this device (see "Getting started", Page 11).
The main switch (if present) and the ON/OFF switch do not disconnect the
device from the mains voltage. To completely disconnect from the mains
voltage, remove the power plug from the power socket.
Replace the lithium battery on the mainboard in accordance with the instructions
in "Replacing the lithium battery", Page 44.
Caution, components in the system can get very hot.
The activities described in these instructions must always be
performed with the greatest care.
Repairs to the device must only be carried out by qualified technicians. Incorrect
repairs could put the user at great risk (electric shock, hazardous energy emissions,
risk of fire) or cause serious damage to the equipment.
Transporting the device
Retransportation
Transportation
Device,
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
Fujitsu Technology Solutions
7
Important notes
Cleaning the device
System unit,see Device
Retransportation
Transportation
Device,
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into the device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild domestic detergent and then carefully wrung out.
Use disinfectant wipes to clean the keyboard and the mouse.
Energy saving, disposal and recycling
Drivers&
Recycling
Energysaving
Disposal
User
DocumentationDVD
UtilitiesDVD
Further information can be found on the "Drivers & Utilities" DVD.
8
Fujitsu Technology Solutions
Important notes
CE marking
Lowvoltagedirective
Electromagneticcompatibility
Notes
CEmarking
The shipped version of this device complies with the requirements of EEC
directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC
"Low voltage directive".
CE marking for devices with radio component
This equipment complies with the requirements of Directive 1999/5/EC of the
European Parliament and Commission from 9 March, 1999 governing Radio
and Telecommunications Equipment and mutual recognition of conformity.
This equipment can be used in the following countries:
Belgium
Bulgaria
Denmark
Germany
Estonia
Finland
France
Greece
UK
Ireland
Iceland
Italy
Latvia
Liechtenstein
Lithuania
Luxembourg
Malta
Netherlands
Norway
Austria
Poland
Portugal
Rumania
Sweden
Switzerland
Slovakia
Slovenia
Spain
Hungary
Czech Republic
Cyprus
Contact the corresponding government office in the respective country for
current information on possible operating restrictions. If your country is
not included in the list, then please contact the corresponding supervisory
authority as to whether the use of this product is permitted in your country.
Fujitsu Technology Solutions
9
Important notes
FCC Class B Compliance Statement
The following statement applies to the products covered in this manual, unless otherwise specified
herein. The statement for other products will appear in the accompanying documentation.
NOTE:
This equipment has been tested and found to comply with the limits for a "Class B" digital
device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian
Interference-Causing Equipment Standard ICES-003 for digital apparatus. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in strict accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Fujitsu Technology Solutions GmbH is not responsible for any radio or television interference
caused by unauthorized modifications of this equipment or the substitution or attachment
of connecting cables and equipment other than those specified by Fujitsu Technology
Solutions GmbH. The correction of interferences caused by such unauthorized modification,
substitution or attachment will be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may violate FCC and ICES rules.
10
Fujitsu Technology Solutions
Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Important notes", Page 7 chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be
required for reshipment at some later date.
Packaging,
Contentsofdelivery
Packaging
►
►
►
►
Unpack all the individual parts.
Check the contents of the package for any visible damage caused during transport.
Check whether the delivery conforms to the details in the delivery note.
Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Steps for initial setup
Preparingforuse,
Preparingforfirstuse,overview
Only a few steps are necessary to put your new device into operation for the first time:
• Select a location for device and set up device
• Connecting external devices
• Check the voltage at the mains outlet and connect the device to an electrical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other external devices in addition to your own device (e.g.
a printer), do not connect these until after the initial installation. The following
sections describe how to connect these external devices.
Drives and boards
If you have received drives or boards with your device, please do not install
them until after first-time setup. How to install drives and boards is described
in the "System expansions", Page 30 chapter.
Fujitsu Technology Solutions
11
Getting started
Setting up the device
Device
Ergonomic
Workstation
When setting up your device, please read the recommendations and
safety notes in the "Safety" manual.
We recommend that you place your device on a surface which is not slippery. In
view of the many different finishes and varnishes used on furniture, it is possible
that the rubber feet will mark the surface they stand on.
Depending on the location of your device, troublesome vibrations and noises
may occur. To prevent this, a distance of at least 10 mm should be maintained
from other devices on casing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see "Technical
specification", Page 45, section "Ambient conditions"). Protect the
device against dust, humidity and heat.
Operating position
Use the device only in the vertical operating position.
12
Fujitsu Technology Solutions
Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
Connect and disconnect the cables in the order described below.
Connecting the cables
► Turn off all power and equipment switches.
► Remove all power plugs from the grounded mains outlets.
► Connect all the cables to the device and the external devices. Please make sure that you
always observe the safety notes provided in "Important notes", Page 7.
► Plug all data communication cables into the appropriate sockets.
► Plug all power cables into the grounded mains outlets.
Cable,
Cord
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in "Connecting external devices to the USB
ports", Page 16 and in the documentation for the USB devices.
Disconnecting the cables
►
►
►
►
Switch off all affected devices.
Remove all power plugs from the grounded mains outlets.
Unplug all data communication cables from the appropriate sockets.
Disconnect all of the cables from the device and from the external devices.
Cable,
Fujitsu Technology Solutions
13
Getting started
Ports on the device
Device
Externaldevices
Interfaces
The ports available on your device depend on the selected device configuration level.
The ports are located on the front and back of the device. The ports available on your
device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
DVI-I monitor port, white
VGA monitor port, blue
Monitorport
Monitor port
Microphone port, pink
Audio input (Line In), light blue
Microphoneport
Linein
Audioinput
Headphones, orange or light
green (optional)
Audio output (Line Out), light green
Lineout
Audiooutput
Headphones
USB - Universal Serial Bus,
black
LAN
LAN port
LANport
UniversalSerialBus
PS/2 mouse port, green
(optional)
Keyboard port, purple (optional)
Keyboardport
PS/2mouseport
Mouseport
e-Satae-SATA port
S/PDIF S/PDIF port
Serial port, turquoise
Serialport
Some of the peripherals require special software (e.g. drivers) (refer to the
documentation for the peripheral and operating system).
14
Fujitsu Technology Solutions
Getting started
Connecting a monitor
► Follow the instructions contained in the monitor manual to prepare the monitor
for operation (e.g. connecting cables).
► Connect the data cable of the monitor into the monitor port of your device.
Monitor
The monitor power cable may only be connected to the device monitor socket if
the monitor current consumption is less than 1.5 A for 230 V or 3 A for 115 V.
The values for the monitor current consumption can be found in the technical
data on the monitor or in the operating manual for the monitor.
► Depending on the configuration level of your device, plug the monitor power
cable into the grounded mains outlet.
Connecting the mouse
Depending on the equipment level selected, your device will be supplied with
a USB mouse or a PS/2 mouse.
Connecting,
Mouse,
Connecting a USB mouse
► Connect the USB mouse to one of the USB ports on the device.
USBport
USBport,
Connecting a PS/2 mouse
If you do not attach a mouse to the PS/2 mouse port, you can disable the mouse
controller in the BIOS Setup in order to free the IRQ12 for a different application.
► Connect the PS/2 mouse to the PS/2 mouse port of the device.
Connecting,
PS/2mouse,
Connecting the keyboard
Depending on the equipment level selected, your device will be supplied with
a USB keyboard or a PS/2 keyboard.
Connecting,
Keyboard,
Connecting a USB keyboard
Use the supplied keyboard cable only.
Connecting,
USBport,
► Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
► Insert the flat rectangular USB plug of the keyboard cable into one of the device’s USB ports.
USBport
Connecting a PS/2 keyboard
Use the supplied keyboard cable only.
Connecting,
ConnectingaPS/2keyboard
► Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
► Plug the round plug of the keyboard cable into the keyboard port on the device.
Keyboard,
Fujitsu Technology Solutions
15
Getting started
Connecting external devices to the serial interface
Devices,
Externaldevices,
Serialinterface,
Serialinterface
External devices can be connected to the serial interface (e.g. a printer or modem).
► Connect the data cable to the external device.
► Connect the data cable to the corresponding serial interface.
For an exact description of how to connect external devices to the corresponding
port, please see the external device documentation.
Port settings
Serialinterface,
You can change the port settings (e.g. address, interrupt) in the BIOS Setup.
Device drivers
Device drivers,
The devices connected to the serial interface require drivers. Your operating system
already includes many drivers. If the required drive is missing, install it. The latest
drivers are usually available on the Internet or will be supplied on a data carrier.
Connecting external devices to the USB ports
Devices,
Externaldevices,
USBport,
USBdevices,
You can connect a wide range of external devices to the USB ports (e.g.
printer, scanner, modem or keyboard).
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in the documentation for the USB devices.
► Connect the data cable to the external device.
► Connect the data cable to one of the USB ports on your device.
Device drivers
The external USB devices you connect to the USB ports usually require no
driver of their own, as the required software is already included in the operating
system. However, if the external USB device requires its own software, please
install it from the data carrier provided with the USB device.
To ensure the transmission capacity of USB 2.0, the cable from the external USB
device to the USB port of your device must not be longer than 3 m.
16
Fujitsu Technology Solutions
Getting started
Connecting the device to the mains supply
Mainsadapter
1
2
► Connect the power cable to the device (1).
► Plug the power plug into a grounded mains outlet (2).
Switching on for the first time: installing the software
Software,
Installing,
Once the installation has been started the device must not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the device is integrated into a network, the user and server details as well as
the network protocol are required during the software installation.
Contact your network administrator if you have any questions about these settings.
When you switch on the device for the first time, the supplied software
is installed and configured. Plan a reasonable amount of time for this,
as this process must not be interrupted.
You may need the licence number for Windows during the installation. The licence
number is located on a sticker on your device.
Fujitsu Technology Solutions
17
Getting started
Switching on monitor and device
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
Depending on the version, the device may be equipped with a main power switch
on the back of the device in addition to the ON/OFF button on the front.
► Switch the monitor on (see the operating manual for the monitor).
► Switch the device on. To do this, follow the instructions below.
1
2
► Turn the main switch on the back of the device to the "I" position (1).
► Press the ON/OFF switch on the front of the device (2).
The power-on indicator lights green and the device is started.
Installing the software
► During installation, follow the on-screen instructions.
► If anything is unclear regarding the data you are asked to input, read the
online Help in your operating system.
Installing,
Software,
You will find more information on the system, as well as drivers, utilities and updates on
the "Drivers & Utilities" DVD and on the Internet under "http://ts.fujitsu.com/support/".
18
Fujitsu Technology Solutions
Operation
Operation
Switch the device on
► If necessary, switch the monitor on (see the operating manual for the monitor).
► Switch on the device using the main power switch located on the rear of the device (if present).
► Press the ON/OFF switch on the front of the device.
The power-on indicator lights green and the device is started.
Monitor,
Device,
Switching off the device
► Shut down the operating system in a defined manner. In Windows: via the
Start menu and the Turn Off Computer function.
► If the operating system does not automatically switch the device into energy-saving mode or
switch it off, press the ON/OFF switch. Warning, this could lead to a loss of data!
If the device is in standby, it consumes a minimum of energy.
► Switch the device off at the main switch (if present).
The device no longer uses any power.
Monitor,
Device,
The main switch and the ON/OFF switch do not disconnect the device
from the mains voltage. To completely disconnect from the mains voltage,
remove the power plug from the power socket.
► If necessary, switch the monitor off (see the operating manual for the monitor).
Fujitsu Technology Solutions
19
Operation
Indicators on the device
Device,
Indicators,
The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
1
2
3
1 = Drive indicator, e.g. DVD
2 = Power indicator
3 = Hard disk indicator
Hard disk indicator
The indicator lights up when the device’s hard disk is accessed.
Power indicator
Power indicator,
indicator
In energy-saving mode, the device must not be switched off with the main power switch
(if present) or disconnected from the mains, as this may result in data loss.
•
•
•
The indicator is green: the device is on.
Indicator lights up orange or flashes green (depending on the type of device): Device is in
power-saving mode. After being switched on with the On/Off switch, the device switches
on or returns to the state it was in before it went into power-saving mode.
The indicator is not illuminated: The device is switched off (power switch set to 0 or disconnected
from the mains) or ready. If the device is ready it can be switched on with the ON/OFF switch.
Floppy disk indicator (optional)
Floppy diskdrive,
The indicator lights up when the device’s floppy disk drive is accessed. You may
only remove the floppy disk when the indicator is not on.
Drive indicator, e.g. DVD
drive,
indicator
DVDindicator,
DVDindicator
CD-ROM
The indicator lights up when the CD-ROM or DVD drive is accessed. You may
only remove the DVD when the indicator is dark.
20
Fujitsu Technology Solutions
Operation
Keyboard
Alphanumeric
Keyboard,
Keyboard
Cursor
Function
Keys,
Numeric
keys
keypad
keys keypad
The illustrated keyboard is an example and may differ from the model you use.
1
2
3
1 = Function keys
2 = On/off switch (optional)
3 = Alphanumeric keypad
4
5
4 = Cursor keys
5 = Numeric keypad (calculator keypad)
Important keys and keyboard shortcuts
Keyboardshortcuts
Keys
The description of the following keys and keyboard shortcuts applies to Microsoft
operating systems. Details of other keys and keyboard shortcuts can be found in
the documentation for the relevant application program.
Button,
ON/OFFswitch
On/off switch (optional)
Depending on the setting in the BIOS Setup, the device can be switched
on or off with this switch. Some operating systems allow you to
configure additional functions of the ON/OFF switch in the Control
Panel.
With some keyboards the ON/OFF switch can only be used with an
ACPI (Advanced Configuration and Power Management Interface).
Otherwise the key is inoperative. The mainboard must support this
function.
Enter key
Keys,
confirms the highlighted selection. The Enter key is also referred to
as the "Return" key.
Fujitsu Technology Solutions
21
Operation
Start key
Keys,
calls up the Windows Start menu.
Keys,
Menu key
calls up the menu for the marked item (Windows).
Keys,
Shift key
enables upper-case letters and the upper key symbols to be displayed.
Keys,
Alt Gr key
produces a character shown on the bottom right of a key (e.g. the @
sign on the Q key).
Num Lock key
Keys,
By pressing the Num Lock key you switch between the upper- and
lower-case levels of the calculator keypad.
When the Num Lock indicator is lit the numeric keypad and arithmetic
keys are active.
When the Num Lock indicator is not lit the cursor control functions on
the Numeric keypad are active.
Ctrl key
Keys,
Ctrl
performs a special operation when pressed in conjunction with another
key. The Ctrl key is also referred to as "Control" or the "Control key".
Windows security/Task-Manager
keyboardshortcuts
Keys,
Ctrl+Alt+Del
Del
Ctrl
+
Alt
+
SysRq
This key combination opens the Windows Security/Task Manager
window.
Settings in BIOS Setup
System
BIOS
Setup,
Setup,
Setup
settings,
In BIOS Setup, you can set the system functions and the hardware configuration of the device.
When the PC is delivered, the default entries are valid (see "BIOS Setup" manual or manual for
the mainboard). You can customise these settings to your requirements in the BIOS Setup.
22
Fujitsu Technology Solutions
Operation
Property and data protection
Property protection
Securitymeasures
Dataprotection
Software functions and mechanical locking offer a broad range of functions for protecting your
device and your personal data from unauthorised access. You can also combine these functions.
Anti-theft protection and lead-sealing
Chain
KensingtonLock
Anti-theftprotection
Lead-sealing
Casing,
Device,
1
2
1 = Fixture for Kensington Lock
2 = Holes for padlock
Anti-theft protection
You can protect your device from theft
•
•
with the fixture for the Kensington Lock (1) and a Kensington MicroSaver.
Consult the manual for your Kensington Lock.
with the holes (2) and a padlock and chain which you have connected to a fixed object beforehand.
Lead-sealing
To prevent unauthorised persons from opening the system unit, the casing can be lead-sealed. To
do this, feed the sealing chain through the holes (2) and seal the chain with the lead seal.
Fujitsu Technology Solutions
23
Operation
BIOS setup security functions
BIOS Setup,
Securityfunctions,
The Security menu in BIOS Setup offers you various options for protecting your
personal data against unauthorized access, e.g.:
• Preventing unauthorised access to BIOS Setup
• Preventing unauthorised system access
• Preventing unauthorised access to the settings of boards with their own BIOS
• Preventing system boot from the floppy disk drive
• Issuing virus warnings
• Preventing unauthorized writing of floppy disks
• Protecting BIOS from overwriting
• Protecting the device from being switched on by an external device
You can also combine these functions.
You will find a detailed description of the Security menus and how to assign passwords
in the manual for the mainboard or in the "BIOS Setup" manual.
Access authorisation via SmartCard
Accesspermission,SmartCard
Securityfunctions,
In systems equipped with a SmartCard reader, access can be restricted to those
users who have a corresponding SmartCard.
24
Fujitsu Technology Solutions
Troubleshooting and tips
Troubleshooting and tips
Comply with the safety information in the "Safety" manual and the chapter
"Getting started", Page 11, when attaching or detaching cables.
If a fault occurs, try to rectify it in accordance with the measures described in the following documents:
•
•
•
•
in
in
in
in
this chapter
the documentation relating to the peripheral devices
the Help sections for the individual programs
the documentation for the operating system in use.
Help if problems occur
Should you ever have a problem with your computer that you cannot solve yourself, in many cases
you can solve it quickly using the SystemDiagnostics program pre-installed on your computer.
► To start the SystemDiagnostics program, click Start symbol - Program - Fujitsu - SystemDiagnostics.
► If a problem is detected during the test run, the SystemDiagnostics program outputs
a code (e.g. DIFS code YXXX123456789123).
► Take a note of this DIFS code and the ID number of your device. The ID number can
be found on the type rating plate on the back of the casing.
► For further clarification of the problem, contact the Service Desk for your country (see the
Service Desk list or visit the Internet at "http://ts.fujitsu.com/support"). When you do this, please
have ready the identity number and serial number of your system and the DIFS code.
Troubleshooting
Power indicator remains off after you have switched
on your device
Cause
The mains voltage supply is faulty.
Internal power supply overloaded.
Fujitsu Technology Solutions
Remedy
► Check that the power cable is correctly
plugged into the device and into a grounded
mains outlet.
► Check that the main switch at the rear of the
monitor is set to the "I" position.
► Switch the device on.
► Pull the power plug of the device out of the
mains outlet.
► Wait a moment.
► Plug the power plug into a properly grounded
mains outlet again.
► Switch the device on.
25
Troubleshooting and tips
The device cannot be switched off with the ON/OFF switch.
Cause
The device has not been switched on with the
ON/OFF switch.
System crash
Remedy
► Press the ON/OFF switch again.
► Keep the on/off switch pressed for at least 4
seconds until the machine switches off.
Caution: This can lead to a loss of data!
This procedure does not allow the operating
system to shut down in an orderly way. The next
time the system is started there may well be
error messages.
Monitor remains blank
Cause
Remedy
Monitor is switched off.
Power saving has been activated (screen is
blank)
► Switch your monitor on.
► Press any key on the keyboard.
or
Brightness control is set to dark
►
Power cable not connected
►
►
►
Monitor cable not connected
►
►
►
►
26
► Deactivate the screen saver. If
necessary, enter the appropriate
password.
Adjust the brightness control. For detailed
information, please refer to the operating
manual supplied with your monitor.
Switch off the monitor and the device.
Check that the monitor power cable is
properly connected to the monitor and to
a grounded mains outlet or to the monitor
socket of the device.
Check that the device power cable is
properly plugged into the device and a
grounded mains outlet.
Switch on the monitor and the device.
Switch off the monitor and the device.
Check that the monitor cable is properly
connected to the device and monitor.
Switch on the monitor and the device.
Fujitsu Technology Solutions
Troubleshooting and tips
Cause
Wrong monitor has been set under Window XP
Remedy
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting the operating system
appears.
► If the menu for selecting the operating
system appears, press F8 .
► Select Safe Mode or Safe Mode with Network.
► Go to Start – Settings – Control Panel – Display
and the tabs Appearance, Themes, Settings
to set the correct values for the connected
monitor as described in the operating
manual of the monitor.
Incorrect setting for the monitor in Windows Vista ► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting the operating system
will appear.
Wrong monitor has been set under Windows 7
The wrong RAM modules have been inserted
Fujitsu Technology Solutions
► If the menu for selecting the operating
system appears, press the F8 key.
► SelectSafe Mode or Safe Mode with Network.
► Go to Start symbol – (Settings) – Control
Panel – Appearance and Personalization –
Personalization and enter the correct values
for the connected monitor as described in
the operating manual of the monitor.
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting the operating system
appears.
► If the menu for selecting the operating
system appears, press F8 .
► Select Safe Mode or Safe Mode with Network.
► Go to Start – Control Panel – Appearance
and Personalization – Display to enter the
correct values for the connected monitor as
described in the operating manual of the
monitor.
► See the technical manual for the mainboard
for information on which memory modules
can be used.
27
Troubleshooting and tips
No mouse pointer displayed on the screen
Cause
The mouse is not correctly connected.
Remedy
► Shut down the operating system properly.
► Switch the device off.
► Check that the mouse cable is properly
connected to the system unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.
► Make sure that only one mouse is
connected.
► Switch the device on.
The floppy disk cannot be read or written
Cause
The write protection of the floppy disk or the
floppy disk drive is activated.
The floppy disk drive controller is not enabled.
The floppy disk drive is not connected.
Remedy
► Check whether the write protection of
the floppy disk or the floppy disk drive is
activated (refer to the "BIOS Setup" manual
and if necessary to the manual for the
mainboard).
► Check the relevant entries for floppy disk
drive in the Main menu of the BIOS Setup.
► Check that the floppy disk drive controller
is enabled (refer also to the manual for the
mainboard or in the "BIOS Setup" manual).
► Check that the cables of the floppy disk
drive are properly connected.
Time and/or date is not correct
Cause
Time and date are incorrect.
Remedy
► Set the correct time and date within the
operating system you are using.
or
The lithium battery is discharged.
28
► Set the correct time and/or date in the
BIOS Setup.
► If the time and date are repeatedly wrong
when you switch on your device, replace the
lithium battery (see "Replacing the lithium
battery", Page 44).
Fujitsu Technology Solutions
Troubleshooting and tips
Error messages on the screen
Error messages and their explanations are provided:
•
•
in the technical manual for the mainboard
in the documentation for the programs used
Installing new software
When installing programs or drivers, important files may be overwritten and modified. To
be able to access the original data in the event of any problems following installation,
you should backup your hard disk prior to installation.
Restoring hard disk contents
Should you need to restore your hard disk, the instructions are provided on the case
of the "Recovery DVD" (delivered with your system).
Tips
Topic
Out of system resources
Tip
► Close unnecessary applications.
or
Other manuals
Fujitsu Technology Solutions
► Run the applications in a different order.
Further manuals are provided as PDF files on
the "Drivers & Utilities" DVD.
29
System expansions
System expansions
System expansion
Device,
Upgrades,
Servicing
Components
Repairs to the device must only be carried out by qualified technicians.
Unauthorised opening or incorrect repair may greatly endanger the user (electric
shock, fire risk) and will invalidate your warranty.
After consulting the Hotline/Service Desk, you may remove and install the
components described in this manual yourself.
If you remove or install components without consulting the Hotline/Service
Desk, then the warranty of your device will become void.
As the device has to be shut down in order to install/deinstall system hardware
components, it is a good idea to print out the relevant sections of this chapter beforehand.
The following illustrations may differ slightly from your device, depending on its configuration level.
If further documentation was delivered with your device, please also read this through carefully.
In addition, before removing or installing system components, please pay attention to the following:
The device must be switched off when installing/removing the system
expansions and may not be in energy-saving mode.
Remove the power plug before opening the device.
Be careful that no wires become trapped when removing or installing components.
When installing components that become very hot, make sure that the
maximum permissible temperature is not exceeded.
An update of the BIOS may be required for a system expansion or hardware
upgrade. Further information can be found in the BIOS help section or if
necessary in the Technical Manual for the mainboard.
30
Fujitsu Technology Solutions
System expansions
Information about boards
Take care with the locking mechanisms (catches and centring pins) when you
are replacing boards or components on boards.
Note that some components on the mainboard may be very hot if the device was in
use shortly before the casing was removed.
These components can be marked with the adjacent symbol.
To prevent damage to the board or the components and conductors on it, please take care when
you insert or remove boards. Make sure expansion boards are inserted straightly.
Never use sharp objects (screwdrivers) for leverage.
Boards with electrostatic sensitive devices (ESD) are identifiable by the label
shown.
When handling boards fitted with ESDs, you must always observe the
following points:
•
•
•
•
You must always discharge static build up (e.g. by touching a grounded
object) before working.
The equipment and tools you use must be free of static charges.
Only touch or hold the boards by the edge or, if present, at the areas
marked green (Touch Points).
Never touch pins or conductors on boards fitted with ESDs.
Fujitsu Technology Solutions
31
System expansions
Opening the casing
Device,
Casing,
► Switch the device off. The device must not be in power-saving mode.
Please observe the safety information in "Important notes", Page 7.
Disconnect the mains plug from the mains outlet.
Only insert the power plug after you have closed the casing.
► Remove any connected wires which are in the way.
► Lay the device on its side in the manner shown below.
1
2
1
1
► Remove the casing screws (1).
► Slide the side cover from the casing in the direction of the arrow (2).
32
Fujitsu Technology Solutions
System expansions
Closing the casing
► Insert the side part in the guide rail on the lower part of the casing.
Device,
Casing,
1
2
2
► Slide the side cover onto the casing in the direction of the arrow (1).
► Tighten the casing screws (2).
► Reconnect the cables that you disconnected before.
Fujitsu Technology Solutions
33
System expansions
Installing and removing a board
You can install additional modules in order to increase the performance of your machine.
The number, position and arrangement of the board slots on the mainboard can be found in
the manual for the mainboard. Boards may already be installed on shipment.
Board,
Board installing
► Open the casing (see "Opening the casing", Page 32).
Board,
2
1
► Remove the screw (1) from the cover plate (1).
► Remove the cover plate from the casing in the direction of the arrow (2).
1
2
► Remove the screw on the slot cover (1).
► Pull the slot cover out of the slot in the direction of the arrow (2).
34
Fujitsu Technology Solutions
System expansions
Do not throw away the slot cover. For cooling, protection against fire and in order to
comply with EMC regulations, you must refit the slot cover if you remove the board.
2
1
►
►
►
►
►
Push the board into the slot (1).
Tighten the screw on the slot cover (2).
Secure the cover plate on the casing again.
If necessary, connect the cables to the board.
Close the casing (see "Closing the casing", Page 33).
If you have installed or removed a board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
Fujitsu Technology Solutions
35
System expansions
Board removing
► Open the casing (see "Opening the casing", Page 32).
► Remove the cover plate (see "Board installing", Page 34).
► Disconnect the cables connected to the board.
Board,
1
2
► Remove the screw on the board (1).
► Pull the board out of the slot in the direction of the arrow (2).
► Place the board in suitable packaging.
36
Fujitsu Technology Solutions
System expansions
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the slot cover.
2
1
►
►
►
►
Slide the slot cover into the slot (1).
Secure the slot cover in position with the screw (2).
Secure the cover plate on the casing again.
Close the casing (see "Closing the casing", Page 33).
If you have installed or removed a PCI board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
Fujitsu Technology Solutions
37
System expansions
Installing and removing drives
51/4-inchdrive
31/2-inchdrive
Drive,
Drive
The PC casing can accommodate a total of five drives:
• three accessible drives (two 5¼-inch drives and one 3½-inch drive)
• two non-accessible hard disk drives (two 3½-inch drives with half installation height)
"Accessible drives" are e.g. DVD or CD ROM drives, into which a data
carrier can be inserted from outside.
An accessible 31/2 inch drive is for example a diskette drive or a multicard reader.
These drives can be used to read data storage media.
Removing and installing accessible drives
The number of screws used to attach the drives varies according to the type of
drive fitted and may not necessarily match the depiction below.
Removing an accessible 51/4 inch drive (e.g. DVD drive)
► Open the casing (see "Opening the casing", Page 32).
► Disconnect all cables connected to the drive (data cable, power supply cable).
Accessible drive,
Drive,
1
1
2
► Loosen the screws (1).
► Working from behind, slide the drive a short distance out of the bay in the direction of the arrow (2).
The drive now protrudes slightly out of the casing.
► Pull the drive out of the casing (2).
► If necessary, make the required settings on the remaining hard disk drive.
38
Fujitsu Technology Solutions
System expansions
Installing an accessible 51/4 inch drive (e.g. DVD drive)
► Open the casing (see "Opening the casing", Page 32).
► If a slide-in module is fitted, remove this first. To do this, proceed in the same way as when
removing a drive (see "Removing an accessible 51/4 inch drive (e.g. DVD drive)", Page 38).
Accessible drive,
Drive,
Do not dispose of the empty slide-in module. For cooling, protection against
fire, and in order to comply with EMC regulations, you must refit the empty
slide-in module if you remove the drive again later.
► Take the new drive out of its packaging.
► Make the desired settings on the new drive (if necessary, to the settings of
drives already installed as well (Master/Slave)).
2
2
1
►
►
►
►
Slide the drive into the casing (1). Make sure that the screw holes are aligned.
Fasten the drive in place with the screws (2).
Plug the data and the power supply connectors into the drive. Make sure the polarity is correct.
Close the casing (see "Closing the casing", Page 33).
It may be necessary to modify the entry for the drive in the BIOS Setup.
Fujitsu Technology Solutions
39
System expansions
Install an accessible 31/2 inch drive (e.g. diskette drive)
► Open the casing (see "Opening the casing", Page 32).
► Remove the accessible 51/4 inch drive (see "Removing an accessible 51/4
inch drive (e.g. DVD drive)", Page 38).
► Remove the front panel from the casing.
► From the inside, press the plastic drive cover out of the front panel.
Diskettedrive,
1
► Break out the pre-stamped metal cover on the drive bay opening with a screwdriver (1).
► Secure the front panel on the casing again.
2
2
1
►
►
►
►
40
Slide the drive into the casing (1). Make sure that the screw holes are aligned.
Fasten the drive into place with the screws (2).
Plug the data and the power supply connectors into the drive. Make sure the polarity is correct.
Close the casing (see "Closing the casing", Page 33).
Fujitsu Technology Solutions
System expansions
Remove an accessible 31/2 inch drive (e.g. diskette drive)
► Open the casing (see "Opening the casing", Page 32).
► Disconnect all cables connected to the drive (data cable, power supply cable).
1
1
2
► Remove the screws (1).
► Slide the drive out of the bay from behind, in the direction of the arrow (2).
► Close the casing (see "Closing the casing", Page 33).
Fujitsu Technology Solutions
41
System expansions
Installing and removing the hard disk drive
Harddiskdrive,
Removing a hard disk drive
► Open the casing (see "Opening the casing", Page 32).
► Remove all connected cables (data cable, power supply) from the drive.
Harddisk drive,
11 1 1
2
► Undo the screws (1) and gently press against the hard disk drive from underneath.
► Pull the drive backwards a short way out of the bay in the direction of the arrow (2).
The drive now protrudes slightly out of the bay.
► Pull the drive completely out of its bay. Make sure that you are not touching other components.
► If necessary, make the required settings on the remaining hard disk drive.
► Close the casing (see "Closing the casing", Page 33).
It may be necessary to modify the entry for the remaining drives in the BIOS Setup.
You will need a SATA cable to install a second hard disk on the listed device variants.
An additional power supply cable is necessary for the ESPRIMO P2440,
ESPRIMO P2540 and ESPRIMO P2550 device variants.
42
Fujitsu Technology Solutions
System expansions
Installing a hard disk drive
► Open the casing (see "Opening the casing", Page 32).
► Take the new hard disk drive out of its packaging.
Harddisk drive,
22 2 2
1
► Slide the hard disk drive into the casing (1). Make sure that the screw holes are aligned.
► Press gently against the hard disk drive from below and secure it with the screws (2).
► Connect the cables (data cable, power supply) to the drive.
Check that the polarity is correct and do not use any force.
► Close the casing (see "Closing the casing", Page 33).
Mainboard expansions
Details on how to upgrade the main memory or the processor of your device
can be found in the manual for the mainboard.
Lithium battery
Upgrades
Mainboard
Mainmemory
Processor
Upgrading main memory
► Open the casing (see "Opening the casing", Page 32).
► Upgrade the memory according to the description in the manual for the mainboard.
► Close the casing (see "Closing the casing", Page 33).
Mainmemory,
Processor, replacing
► Open the casing (see "Opening the casing", Page 32).
► Upgrade the processor according to the description in the manual for the mainboard.
► Close the casing (see "Closing the casing", Page 33).
Processor,replacing
Fujitsu Technology Solutions
43
System expansions
Replacing the lithium battery
In order to permanently save the system information, a lithium battery is installed to provide
the CMOS-memory with a current. A corresponding error message notifies the user when the
charge is too low or the battery is empty. The lithium battery must then be replaced.
Incorrect replacement of the lithium battery may lead to a risk of explosion!
The lithium battery may be replaced only with an identical battery or with
a type recommended by the manufacturer.
Do not dispose of lithium batteries with household waste. They must be disposed
of in accordance with local regulations concerning special waste.
Make sure that you observe the correct polarity when replacing the lithium
battery. The plus pole must be face up!
Lithium battery, battery
Replacing,lithium
Replacing,
Battery
The lithium battery holder exists in different designs that function in the same way.
3
2
1
2
3
1
► Press the catch in the direction of the arrow (1).
The battery jumps out of the holder slightly.
► Remove the battery (2).
► Push the new lithium battery of the identical type into the holder (3) and
press it down until it engages.
44
Fujitsu Technology Solutions
System expansions
Technical specification
Electrical data
Safety standards
complied with:
Protection class:
Rated voltage range
Rated voltage range
Rated frequency
Rated frequency
Rated current
Max. rated current
ESPRIMO P15XX
ESPRIMO P2440
ESPRIMO P352x
ESPRIMO P2540
ESPRIMO P2550
ESPRIMO P2560
ESPRIMO P2760
IEC 60950-1, EN 60950-1, UL 60950CSA 22.2 No.60950-1
I
200 V – 240 V
100 V – 240 V
50 Hz – 60 Hz
50 Hz
50 Hz – 60 Hz
200 V – 240 V / 2.0 A
200 V – 240 V / 3.0 A
100 V – 240 V / 3.0
A - 5.0 A
Dimensions
Width/depth/height:
176 mm/420 mm/351 mm
Weight
in basic configuration: approx. 8 kg
Environmental conditions
Environment class
DIN IEC 721 part 3-3
(3K2)
DIN IEC 721 part 3-2
Environment class
(2K2)
Temperature
Operating (3K2)
15 ℃ .... 35 °C
Transportation (2K2)
–25 °C .... 60 ℃
Condensation is not permitted during operation
Clearance required to ensure adequate ventilation:
without air vents
min. 10 mm
with air vents
min. 200 mm
The data sheets for these devices contain further technical data. The data
sheets can be found on our website at "http://ts.fujitsu.com".
Fujitsu Technology Solutions
45
Index
Index
3 1/2-inch drive
5 1/4-inch drive
34
34
A
Access permission, SmartCard
Accessible drive,
installing 35
removing 34
Alphanumeric keypad 17
Anti-theft protection 19
Audio input 10
Audio output 10
20
46
7
D
Data protection 19
Device
Ports 10
setting up 8
Device drivers,
serial interface 12
Device,
Anti-theft protection 19
closing 29
indicators 16
Lead-sealing 19
opening 28
switching off 15
switching on 15
transporting 3–4
upgrades 26
Devices,
connecting 12
Diskette drive,
removing 36
replacing 36
Disposal 4
Drive 34
Drive,
accessible 34
installing 34–35
non-accessible drive 34
removing 34
Drivers & Utilities DVD 4
DVD indicator 16
DVD indicator,
indicator 16
B
Battery 40
BIOS Setup 18
BIOS Setup,
configuration 18
security functions 20
settings 18
system settings 18
Board,
installing 30
removing 30, 32
Button,
ON/OFF switch 17
C
Cable,
connecting 9
disconnecting 9
Casing,
closing 29
Lead-sealing 19
opening 28
CD-ROM drive,
indicator 16
CD-ROM indicator 16
CE marking 5
Chain 19
Components
installing/removing 26
Connecting a PS/2 keyboard
Connecting,
keyboard 11
mouse 11
PS/2 keyboard 11
PS/2 mouse 11
USB keyboard 11
Contents of delivery
Cord
see Cable 9
Ctrl+Alt+Del 18
Cursor keys 17
11
E
Electromagnetic compatibility
Energy saving 4
Ergonomic
Workstation 8
External devices
Ports 10
External devices,
connecting 12
5
Fujitsu Technology Solutions
Index
F
Floppy disk drive,
indicator 16
Function keys 17
G
Getting started
shift key 18
Start key 18
L
LAN port 10
Lead-sealing 19
Line in 10
Line out 10
Lithium battery 39
Lithium battery,
replacing 40
Low voltage directive
7
H
Hard disk drive,
installing 38–39
removing 38
replacing 38
Headphones 10
I
Important notes 3
Indicators,
device 16
Installing,
software 13–14
switching on for the first time
Interfaces 10
K
Kensington Lock 19
Keyboard 17
Keyboard port 10
keyboard shortcuts 18
Keyboard shortcuts 17
Keyboard,
alphanumeric keypad
connecting 11
cursor keys 17
function keys 17
numeric keypad 17
port 11
Keys 17
Keys,
Alt Gr 18
Control 18
Ctrl 18
Ctrl key 18
Ctrl+Alt+Del 18
cursor keys 17
Enter 17
Enter key 17
menu key 18
Num Lock 18
Return 17
shift 18
17
Fujitsu Technology Solutions
13
5
M
Main memory 39
Main memory,
upgrading 39
Mainboard
Upgrades 39
Mains adapter
connecting 13
Microphone port 10
Monitor
connecting 11
Monitor port 10
Monitor,
switching off 15
switching on 15
Mouse port 10
Mouse,
connecting 11
N
Note
safety 3
Notes
CE marking 5
important 3
Numeric keypad 17
O
ON/OFF switch
Overview
device 1
17
P
Packaging 7
Packaging,
unpacking 7
Power indicator 16
47
Index
Power indicator,
flashes 16
green 16
off 16
orange 16
Preparing for first use, overview
Preparing for use,
overview 7
Processor 39
Processor, replacing 39
Property protection 19
PS/2 mouse port 10
PS/2 mouse,
connecting 11
port 11
R
Recycling 4
Replacing,
lithium battery 40
Replacing, lithium battery
Retransportation 3–4
40
S
Safety information 3
Security functions,
BIOS Setup 20
SmartCard 20
Security measures 19
Serial interface 12
Serial interface,
connecting devices 12
settings 12
48
7
Serial port 10
Servicing 26
Setup,
see BIOS Setup 18
Software,
installing 13–14
System expansion 26
System settings,
BIOS Setup 18
System unit, see Device 4
T
Transportation
3–4
U
Universal Serial Bus 10
Upgrades
Mainboard 39
Upgrades,
device 26
USB devices,
connecting 12
USB port 11
USB port,
connecting devices 12
connecting keyboard 11
connecting the mouse 11
User Documentation DVD 4
W
Workstation
8
Fujitsu Technology Solutions

advertisement

Key Features

  • PC
  • Intel® Pentium® E5200 2.5 GHz
  • 1 GB DDR2-SDRAM 800 MHz
  • 250 GB DVD-RW
  • Intel® GMA 4500M
  • Linux

Related manuals

Download PDF

advertisement