Polar WearLink Plus heart rate sensor User guide
Below you will find brief information for heart rate sensor WearLink Plus. The Polar WearLink Plus is a heart rate sensor that can be used with a variety of fitness apps and mobile phones. It is compatible with Bluetooth technology, which allows it to wirelessly transmit heart rate data to compatible devices. The sensor is comfortable to wear and can be used for a variety of activities, such as running, cycling, and swimming.
Advertisement
Advertisement
Advertisement
Key features
- Bluetooth Compatible
- Comfortable to wear
- Water-resistant
- Easy to clean
- Long battery life
Frequently asked questions
To get started with your heart rate sensor, pair it with the app first. See the app’s user guidance for more detailed instructions. If the app asks for a pin code, type 0000. You’ll also find the pin code on the back of your connector.
After training, detach the connector and rinse the strap under running water to keep it clean. Connector: Detach the connector from the strap after every use and wipe it dry with a soft towel. Clean with mild soap and water when needed. Strap: Rinse under running water after every use. Wash regularly. Check the label on your strap for detailed washing instructions.
Using a coin, open the battery cover by turning it counterclockwise to OPEN (picture 3). Insert the battery (CR2025) inside the cover with the positive (+) side against the cover. Make sure the sealing ring is in the groove to ensure water resistance. Press the cover back into the connector. Use the coin to turn the cover clockwise to CLOSE.