null  null
Face Recognition System for
Time Attendance
User Guide
CONTENTS
3-4
Chapter 1 •
getting started
Registering Warranty
5-8
16-18
Viewing the User Guide on the Internet Included Accessories
Included Printed Materials
Installation Tips
Activating Terminal
Chapter 2 • BASICS
Introduction
Overview
The Display of LCD Panel
Main Menu
Touch Keypad
Keyboard
Date/Time
Voice Control
Security Features
Cleaning
Restarting and Resetting
Chapter 5 • SYSTEM
General Settings
Display Settings
Face Settings
Log Settings
System Information
19-20 Chapter 6 • DATA
Deleting Transaction Logs
Deleting All Data
Chapter 7 • USB
21
Understanding the Need for USB Flash Disk
Type of USB
Downloading Attendance Logs
Downloading User Data
Uploading User Data from USB to Terminal
Uploading User Photo
22
Chapter 8 • SHORTCUT KEY
Chapter 3 • Connection
– Syncing TERMINALS Installation
Mount on Wall
23
Chapter 9 • AUTO TESt
Shortcut Keys in Short
Configuring Shortcut Keys
9-12
Wiring for Power Supply
Description of Available Connections
TCMS V2 Online Activation
Installation and Setup of TCMS V2
Connecting The Terminals to TCMS V2
Using USB to Download/Upload Data
Communication Key
13-15
Chapter 4 • User
Enrolling Users
Voice / Message
Face Verification
Adding User Information
Deleting User
Access Level/Privilege
Who should do the Auto Test?
Is the Screen OK?
Checking the Voice Message
Checking the Infrared Camera
Is the Time Accurate?
Chapter 10 • calibration
24
25
Calibrating Screen Sensitivity to Default Level
Chapter 11 • bell
Definition of Schedule Bell
Inserting Day and Time to Trigger Schedule Bell
Determining the Ring Type of Schedule Bell
Repetition
State
TROUBLESHOOTING
CONTENTS
26
1 • GETTING STARTED
Viewing the User Guide on the Internet
The User Guide is available in the package when you purchase the product. The
User Guide is also published online at http://www.fingertec.com and http://user.
fingertec.com. Choose the language you prefer to view the User Guide in.
Included Accessories
DC 12V Power Adaptor
Metal Back Plate
Secure this plate on top of the rubber cushion and place the terminal onto it.
Connect the power adapter to
the terminal and plug it into
a standard power outlet to
charge the terminal.
10
11
25
12
1
2
USB Extension
To connect to the USB port
of a computer for uploading and downloading of
data.
A Packet of Bolts
Use the bolts to mount the back
plate of the terminal on the wall.
RFID Cards (5 pcs)
FingerTec provides extra cards for
RFID (5pcs) and Mifare Card, (1pc).
T10 Screwdriver
T10 screwdriver to open the
back plate of the terminal for
installation.
Measurement Tape
To measure the installation
height to achieve optimum
performance for terminal.
Connectors
To connect the wires to a door
lock or a doorbell if required.
Stylus
For easy navigation on the
touch screen LCD panel.
CONTENTS
Included Printed Materials
•
•
•
•
FingerTec Comprehensive DVD
Quick Start Guide
User Enrollment Template Form
Warranty Card
Installation Tips
Best installation location for Face ID 4:
1. Avoid facing strong sunlight.
2.Must be at least 2 meters away from any strong
light source e.g. fluorescent ceiling light
3.The height must be at least 1.2m from the ground
level to the Face ID 4 camera.
Activating Terminal
Every FingerTec access control model comes bundled with a unique license key. To start
using the terminal with TCMS V2, you must connect the terminal to TCMS V2 and perform online activation. TCMS V2 reads the serial number of your terminal and sends it for
verification at the FingerTec server via Internet.
In case you do not have an Internet connection, you would need to do offline activation.
Please send the serial number and models of your terminals to your local resellers or
[email protected] to request for a product key and activation key.
Registering Warranty
Make sure that you register your Face ID 4 warranty with us at http://www.fingertec.
com/ver2/english/e_warranty.htm.
CONTENTS
2 • BASICS
Introduction
Introducing Face ID 4, the new facial recognition technology product combined
with card technology. Face ID 4 can identify an identity in split seconds without any
contact or hassle. It only requires a user to look at the machine to get verified.
Face ID 4 is loaded with powerful microprocessor that can process facial authentication method for accurate personal identification and for collection of precise data
for time attendance and door access. In addition, the Face ID 4 terminal accepts card
verification as an added security measure. If you are looking for a contactless, hassle
free biometrics product, choose Face ID 4. With one look you are good to go!
Overview
LED Light Indicator
w
Touch Screen
LCD
Twin Face Camera
Card Induction
Area
[email protected]
Speaker
USB Port
Restart Button
Item
Restart
Micro USB port
Function
Card Induction Area Read the card information based on the card system of Face ID 4.
Touch Screen LCD Touch to access into Face ID 4 system to do configuration.
LED Light Indicator Indicate the status of reader. Green indicates standby mode or verification is successful. Red indicates problem or verification has failed.
Speaker
Emit instructions from Face ID 4.
Twin Face Camera Capture face images in a few directions.
Reset Button
To restart the machine.
USB Port
Connect the USB flash disk to download/upload data from/to Face ID 4.
Micro USB Port
Connect Face ID 4 directly to pc/laptop to download/upload data with TCMS V2.
CONTENTS
The Display of LCD Panel
Take a closer look at the touch screen LCD panel for some basic and important
information. Press moderately on the LCD when input commands to maintain a
longer lifespan of the terminal. Clean the camera area with a microfiber cloth to
maintain the performance of face scanning.
Standby Mode
Enrollment Mode
Date/Day
w
Displays image
of user captured
during enrollment.
Position your eye
to appear in this
area.
Time
Terminal is
in standby
mode, ready
for scanning.
Tap to view
the keypad.
Menu button to access
into the system.
Exit
159
Status bar to indicate the quality of the captured
image; the higher the number, the better the image.
Verification Mode
Display image
of user during
enrollment.
Adjust your
position so your
face appears in
this area.
142
Successful Verification Mode
User ID: 3
Name: Rose phillip
[16 : 55] Verified.
Status bar to indicate the quality of
the captured image; the higher the
number, the better the image.
CONTENTS
Progress bar to
indicate progress of
facial enrollment.
The system will
display your photo,
user ID and name
after verifying your
identity.
Main Menu
New User: Add new user to the Face ID 4.
User: Enroll, edit, delete and insert user information from
New User
User
Connection
System
Data
Date/Time
Auto Test
USB
Sys Info
User icon. The Face ID 4 allows storage of 400 facial images.
Connection: Setup the Face ID 4 communication with computer through LAN. Set communication with a computer for
a secure data transfer.
System: Configure the settings of the Face ID 4 including
attendance and update settings.
Data: Check user attendance and transaction logs that are
available in the Face ID 4 and perform housekeeping of the
terminal.
Date/Time: Shortcut to set date/time into the Face ID 4.
Auto Test: Run tests on the Face ID 4 to diagnose the terminal on various aspects.
USB: Transfer data to and from the Face ID 4 using a USB flash disk.
Sys Info: Show basic information of the Face ID 4 and its storage status.
Touch Keypad
Press 1:1 to view the touch keypad. You can input information into the Face ID 4 through the touch keypad. It contains
numbers from 0-9, Cancel, and Backspace buttons.
Keyboard
Use the onscreen QWERTY keyboard to type in alphabet
and number input into the Face ID4.
Type Upper Case: Tap the arrow pointing up on the left
corner of the keyboard to change the lowercase to upper
case.
Type Number: Tap the 123 key to change the keyboard to
display numbers.
Return: Tap Enter to return. Tap X on the keyboard top right
corner when you are done using the onscreen keyboard.
CONTENTS
Date/Time
The Face ID 4 displays date and time at the home screen. Choose a date and time format based on your preference. Press Menu > Date/Time > Select value > Save. You can
select the time format to be either the 12-hour format or the 24-hour format.
Voice Control
Voice Control lets you control the level of volume emitted by the Face ID 4.
Turn On/Off – The Face ID 4 lets you to turn on/off the voice based on your preference.
Press Menu > System > General > Voice Prompts > On/Off >Save.
Adjust Volume: The default volume of the Face ID 4 voice is Mid (medium). To sustain
the performance of speaker in Face ID, the volume is recommended to remain at Mid
value. To adjust the volume Press Menu > System > General > Volume > Select Low |
Mid |High
Security Features
Security features help protect the information in the Face ID 4 from being accessed
by others.
Admin Affirm: Register an administrator into the system by enrolling a face or password to a user ID. Press Menu > New User > Privilege: Administrator > Choose enrollment method > Save.
After enrolling an administrator, the main menu can only be accessed by administrator.
Tamper Switch: The Face ID 4 comes with a tamper switch located at the rear of the
terminal. During installation, the tamper switch is compressed against the back plate.
Any attempt to dismantle the Face ID 4 will trigger the internal alarm and the LCD
panel will display “System Broken” to notify users.
Cleaning
Please turn off the terminal before cleaning it.
Clean Touch Panel: Use a microfiber cloth to clean the Face ID 4. Do not use any liquids,
household cleaners, aerosol spray, solvents, alcohol, ammonia and abrasive solutions
to clean the touch screen panel of the Face ID 4 because it could damage the panel.
Restarting and Resetting
If something isn’t working right, try restarting or resetting the Face ID 4.
Restarting the Terminal: At the botton of Face ID4, look for the Restart button use a
pin, press the button once to restart the terminal.
Resetting the Terminal: Go to Menu > Data and click on Restore to Factory Settings.
Press Yes to confirm. Resetting of Face ID 4 will cause all your settings to return to the
original factory settings.
CONTENTS
3 • CONNECTION – SYNCING TERMINALS
Installation
FingerTec terminals offer several connections for power and communications. To install the Face ID 4, follow the instructions below.
MOUNT ON WALL
• After measuring the height accord-
ingly and make relevant marking
on the wall, drill the screws into the
wall to secure the back plate.
• Attach
the terminal to the back
plate and tighten the screws. Refer
to Appendix I for dimensions and
measurements of installation.
[email protected]
4 feet / 1.2 meter
(recommended)
Wiring for Power Supply
Connection points for power and communication are available at the back of the
terminal.
TCP/IP PORT
POWER PORT
CONTENTS
Descriptions of Available Connections
USB Port
Linking with USB flash disk for remote data transfer.
1
8
1
8
TOP
FRONT
TCP/IP Port
Connect with a CAT 5 cable for LAN connection, one end to terminal’s port and
another end to the computer’s TCP/IP Port.
TCP/IP for Single Connection
JOINT 1 PIN
JOINT 2 PIN
Linking the terminal to a single computer using TCP/IP
requires Ethernet 10/100Base-T Crossover Cable. The
cable can be used to cascade hubs or to connect Ethernet stations back-to-back without a hub. It works with
both 10Base-T and 100Base-TX.
TX+
TX-
RX+
RX-
• 3
• 6
• 1
• 2
•
•
3 •
6 •
1
2
RX+
RXTX+
TX-
TCP/IP for Network Connection
Linking the terminals to multiple computers using TCP/IP requires Ethernet 10/100Base-T Straight Thru
Cable or “whips”. The cable works with both 10Base-T and 100Base-TX, connecting a network interface
card to a hub or network outlet.
CONNECTOR PIN
TX+
1
TX-
2
RX+3
4
5
RX-
6
7
8
•
•
•
•
•
•
•
•
CABLE COLOR White/Orange
Orange
White/Green
Blue
White/Blue
Green
White/Brown
Brown
CONNECTOR
•1
•2
•3
•4
•5
•6
•7
•8
TX+
TXRX+
RX-
Power Supply Port
Insert the Power Adapter point to this port for power.
Access Connection (Only applices to Face ID 4d)
Links the terminal to a door lock system.
Note
10
CONTENTS
Link all cables to the correct connection point(s) before attempting to connect the
terminals to the software.
TCMS V2 Online Activation
TCMS V2 is a genuine software by FingerTec. Every FingerTec access control model
comes bundled with a unique license key. To start using the terminal with TCMS
V2, you must connect the terminal to TCMS V2 and perform online activation.
TCMS V2 reads the serial number of your terminal and sends it for verification at
the FingerTec server via Internet.
In case you do not have an Internet connection, you would need to do offline activation. Please send the serial number and models of your terminals to your local resellers or [email protected] to request for a product key and activation key.
Installation and Setup of TCMS V2
Install TCMS V2 in a PC that fulifills the software’s minimum requirements. Refer to
http://user.fingertec.com/user-promanual.htm for the TCMS V2 user guide online.
Setup Wizard will require you to do online activation before a connection can be
established between TCMS V2 and the terminals.
Connecting Terminals to the TCMS V2
Determining THE Terminal Number
Identify the number of your terminals to differentiate them between one another.
TCMS V2 can connect up to 999 units of terminal. Press Menu > Options > Comm
Opt > Dev Num > Select the number.
Using TCP/IP
IP address is important, as it is a unique address of the terminal in LAN. Without
the IP address, locating the specific terminal is not possible. To input the IP address of the terminal: Press Menu > Options > Comm Opt > IP Addr > Key in IP
address.
Setting Up Ethernet
It is important to setup the Ethernet to connect the terminals using TCP/IP connection. Setting up the Ethernet is done by enabling the Ethernet function: Press
Menu > Options > Comm Opt > Ethernet > Yes.
Turn off the terminal after you have set the Ethernet setting to Yes. Now, plug-in
the network plug to the Ethernet interface and turn the power on.
Determining the Netmask, Gateway and NetSpeed: For TCP/IP connection,
please configure the netmask, gateway and netspeed for the terminal.
Press Menu > Options > Comm Opt > NetMask > Insert the numbers.
Press Menu > Options > Comm Opt > Gateway > Insert the numbers.
Press Menu > Options > Comm Opt > NetSpeed > Choose the speed of your Ethernet connection.
CONTENTS
11
Using RS232 Connection
For connection via RS232,baudrate is the determinant of communication speed between the terminal and the software. The higher the baudrate, the faster the speed is.
To turn on RS232 connection and set the baudrate: Press Menu > Options > Comm
Opt > RS232 > Change the RS232 connection to Y.
To change baudrate: Press Menu > Options > Comm Opt > Baudrate > Change the
Baudrate accordingly.
Using RS485 Connection
For connection via RS485, baudrate is also the determinant of communication speed
between the terminal and the software but the speed must be according to the speed
of theconverter. Check your converter for the speed.
To turn on RS485 connection and set the baudrate: Press Menu > Options > Comm
Opt > RS232 > Change the RS485 connection to Y.
To change baudrate: Press Menu > Options > Comm Opt > Baudrate > Change the
Baudrate accordingly.
Using USB to Download/Upload Data
A USB flash disk is useful in cases where the terminal is installed far from a PC or there
is a connection problem. To determine the type of USB flash disks compatible with the
terminal, please refer to this link at http://www.fingertec.com/newsletter/HL_74.html using
USB. Press Menu > PenDrive Mgmt > Choose the operation that you want to carry out
via USB flash disk.
Communication Key
Since the software is controlled by an activation code and a product key, set the COMM
key to zero. Press Menu > Options > Comm Opt > COMM Key > Set to 0.
12
CONTENTS
4 • USER
Enrolling Users
The Face ID 4 can contain up to 400 face templates and 10,000 card users.
Face Enrollment
One face registration would take approximately 30 sec to complete. The terminal
snaps images of your face and generates a 3 dimensional template for storage. During enrollment on the Face ID 4, please stand straight and do not move your face or
body, and make sure that your face is calm with no extreme expression. For height
between 150cm to 180cm, recommended distance between the Face ID 4 and user
is 0.5m.
To enroll face: Press Menu > New User > User ID > Insert User ID > Select Face > A
green rectangular box will be displayed on the screen > Align your eye position into
the green box > Adjust your head position to align your eyes into the green box >repeat 2 times > Face enrollment is complete > Select Privilege > User > Save
Card Enrollment
The default card for the Face ID 4 is RFID. MiFare card system available upon requests.
To enroll card: Press Menu > New User > User ID > Insert User ID > Select Card >
Wave the card at the scanning area until the screen displays the Card ID > Select
Privilege > User > Save
Password Enrollment
The Face ID 4 offers different enrollment methods and password can be used alone
or in combination with the face recognition methods. The maximum length of a
password is 8 digits.
To enroll password: Press Menu > New User > User ID > Insert User ID > Select
Password > Input password using the touch keypad > OK > Reconfirm password >
OK > Select Privilege > User > Save
Voice / Message
Voice / Message
What Does It Mean?
“Verified”
Identity verification is successful, the Face ID 4 stores the transaction logs and opens the door (if connected to door access)
“Try again please”
Identity verification failed because the face is not properly positioned, the template is not available in the Face ID 4 or the password is incorrect.
CONTENTS
13
Voice / Message
What Does It Mean?
“Admin Affirm”
You are not the administrator of the system and you cannot access Menu page.
“Invalid ID”
For 1:1 verification, User ID entered does not match the face.
Face Verification
1:N – 1:N verification does not require any input of your user ID. Stand in front of the
Face ID 4 until you can see the reflection of your face on the panel and look at the
cameras. The Face ID 4 takes a second to verify your face.
1:1 – 1:1 requires input of User ID before the Face ID 4 reads and verifies. Press 1:1
> Input ID on the screen > Press face icon > the Face ID 4 reads and verifies. Some
precautions have to be taken to get a good read everytime.
· Stand firm, do not move your head
· Do not cover your face
· Stay calm, do not make extreme facial expressions like sticking your tongue out or
cringing your face
· Do not stand too close or too far from the Face ID 4.
Adding User Information
User information can be added into the Face ID 4 via two ways. One is through the
terminal and another is through the TCMS V2. To add/change user information via
the Face ID 4, press Menu > User > Select Employee ID > Edit/Add > Save. To search
for users by name, click on the alphabets at the bottom of the screen.
Field
What can you do?
USER IDEdit user ID based on your company’s employee numbering system. Maximum length of user ID is 9 digit
NAME Edit/Add name of in this field. Maximum number of characters is 24
FACE To show quantity of face templates store.
CARD Delete/Add Card
PASSWORD Delete/Add Password
PRIVILEGE Change privilege of users
It is recommended that the updating of user information be done through the TCMS
V2 software. After the information is updated, sync the TCMS V2 and the Face ID 4 to
display the information.
14
CONTENTS
Deleting User
Only an administrator can perform user deletion at the Face ID 4. To delete certain
user(s), press Menu > User > Select User ID to delete > Press Delete > Press Yes to
confirm > Press Delete another time for confirmation.
Access Level/Privilege
The Face ID 4 offers four types of access level or privilege.
PRIVILEGE USER ROLES
Normal User Only use the terminal to verify your identity. You cannot access into the
Menu and make changes on settings and system.
Enroller You are allowed to access into the menu to enroll user only.
Administrator You are allowed to access into the menu to enroll users only and edit simple settings and system excluding access options and advanced options.
Supervisor
You are allowed to access into the menu to enroll users and edit settings
and system.
CONTENTS
15
5 • SYSTEM
General Settings
Adjusting Date/Time
The Face ID 4 is a terminal that records time attendance and door access* activities
(*Face ID 4d only) of employees. Precision in time and date cannot be compromised
for the system to work efficiently. Adjust Date/Time according to your time zone.
Press Menu > Date/Time > Select Value >Save
Date format
Date format can differ based on countries for example in America, month-date-year
format is used while in Asian countries the month comes first. Choose your date
format according to your preference. The default format is dd-mm-yy. Press Menu
> Date/Time > Select Format > Save
Sound of Keyboard
The Face ID 4 emits a sound when you press any of its buttons. To turn on/off the
keypad sound: Press Menu > System > General > Keyboard beep > On/Off > Save
Voice
The Face ID 4 has certain voice commands to guide users, during enrollment and
to notify users during verification. Press Menu > System > General > Voice > On/Off
> Save
Volume (Low/Mid/High)
Voice Control lets you control the level of volume emitted by Face ID 4. The default
volume of the Face ID 4 is Mid. To sustain the performance of speaker in Face ID
4, it’s recommended to stay at Mid. To adjust the volume, press Menu > System >
General > Volume > Low/Mid/High > Save
Display Settings
Customize the Face ID 4 display to your preference and requirements.
System Language
The Face ID 4 offers various languages to match your local requirements. A maximum of 3 language packs are available in the Face ID 4 and it is set according to
your request during purchase. The default language is English. Press Menu > System > Display > Language > Choose your language > Save
16
CONTENTS
View Toolbar
You can choose to either hide or display the toolbar on
the screen.
Always Display: The toolbar will always be displayed at
the side of the screen.
Auto Hide: The toolbar is hidden and will reappear
when you touch the soft touch panel. Menu > System >
Display >Toolbar > Choose your style > Save
Sleep Time
Sleep time is a period before the Face ID 4 goes into
sleep mode. This setting is available as a power saving
feature of Face ID 4. The time range is from 0-99 minutes. Menu > System > Display > Sleep Time > Determine your time > Save
Face Settings
Setting Threshold
Threshold is a level of infrared scanner’s sensitivity. Threshold determines how
many percent of your face is being read by the system. The higher the threshold
level, the more percentage is being read, the more restricted the system. Configure
the threshold for 1:1 and 1:N methods.
For 1:1, the range is from 0-99 and the recommended value is 70.
For 1:N, the range is from 0-99 and the recommended value is 80.
Menu > System > Face > 1:1 Threshold/1:N Threshold > Input your value > Save
Camera Exposure
You can adjust the light exposure level of infrared cameras in the Face ID 4. Improper value to the settings could affect the performance of the camera. The recommended value is 320. Menu > System > Face > Exposure > Input your value >
Save
Adjusting Image Quality
To determine the quality of face images captured by the Face ID 4 cameras during
enrollment and verification, you can adjust the quality - the recommended value is
80. Press Menu > System > Face > Quality > Input your value > Save
CONTENTS
17
Log Settings
Every time the Face ID 4 is being used, transaction logs are kept in the memory.
These settings are for the Face ID 4 to regulate housekeeping of logs.
Log Alert
When log storage is at a certain level, users/administrator need to be alerted to
avoid underperformance of the terminal. The recommended value is 99. Menu >
System icon > Log Settings> Log Alert > Input your value > Save
• Dup Punch Period > 0 min
• Work code mode > None
• Card only > No
• Face detect interval > 2s
System Information
This option allows installers to check the information of the terminal including
storage, firmware, algorithm, etc. To retrieve the Face ID 4’s System Information.
Press Menu > Sys Info > Record/Device
Record
Shows free storage and used storage of the Face ID 4
detailing user count, admin count and password user. It
also displays other information such as face templates,
logs templates that been used and available.
device
4
Face VX8.0
Manufacturer
18
CONTENTS
A tap on device displays Device Name, Serial Number of
the terminal, MAC Address, Face Algorithm, Firmware
Version, Manufacturer and Manufactured time.
6 • DATA
Every time an enrollment is performed or verification is done, a
transaction log is stored inside the
Face ID 4. The data contains Terminal ID, date, time, user ID and
transaction activities. For example,
0105021009000000000010000:
Description
Terminal ID
Date (ddmmyy)
Time (hhmm)
User ID
Transaction Code
Terminal Activity
Code
01
050210
0900
000000001
00
00
These logs need to be managed to maintain the effectiveness of the terminal. It
is recommended to do the housekeeping of data from the TCMS V2 software but
there are 5 functions available in Data icon to enable you to manage your data in
Face ID 4.
Deleting Transaction Logs
Please make sure that you are certain when you want to do this operation. The
logs that are stored inside the terminal are the ones that have not been downloaded into TCMS V2. Deleting the logs means that no backup data available.
If you are not using TCMS V2 software but a 3rd party software, make sure that
you have already downloaded the transactions before you proceed to delete.
Menu > Data > Delete Transactions > Confirmation is required (Yes/No)
Deleting All Data
This function allows you to delete all attendance data and user information in
the terminal. Make sure that all user information has been backed up in TCMS
V2 before performing this task. Menu > Data > Delete All Data > Confirmation is
required (Yes/No)
Managing User Privilege
There are 4 administrator privileges in the Face ID 4, supervisor, administrator enroller, user. You can delete the administrator and supervisor privilege but without
an administrator, normal users can access the menu easily and interrupt the settings. Menu > Data > Clear Administrator > Confirmation is required (Yes/No)
Resetting to Factory Settings
There are some instances, which require you to restore the Face ID 4 to original
factory settings. Upon completion of this task, the Face ID 4 will no longer keep
your settings in all functions. Please redo all the settings to suit to your company’s
requirements.
Menu > Data > Restore to Factory Settings > Confirmation is required (Yes/No)
CONTENTS
19
Delete Records
In the event where you will not be using the TCMS V2 software to download records
or you do not need the transaction records, you may delete the records manually.
This is to avoid the records from exceeding the storage limit of the Face ID 4. Besides that, you will also need to delete the records if you are using a USB flash disk
to download transaction records from the Face ID 4 to avoid hang issue.
To delete the records: Press Menu > Data > Delete Transaction > OK to confirm.
20
CONTENTS
7 • USB
Understanding the Need for USB Flash Disk
Communication between the Face ID 4 and a PC is very important to upload and
download transaction data for time attendance and door access reports. The Face
ID 4 offers communication options such as LAN and USB (Universal Serial Bus)
connectivity. USB can connect Face ID with a computer for download and upload
of user information and transaction logs.
Type of USB
There are various types of USB flashdisks available in the market. The Face ID 4
can only work with USB flash disks that supports minimum Linux Kernel 2.4.x,
works fine with Imation, Transcend and Pen Drive (minimum support Linux Kernel 2.4.x) To determine the type of USB compatible by FingerTec terminal, please
refer to this link at http://www.fingertec.com/newsletter/HL_74.html.
Downloading Attendance Logs
To download attendance logs from the Face ID 4 to the computer: Menu > USB >
Download Transactions. After the download process is complete, eject USB flask
disk from the Face ID 4 and connect it to your PC that has been installed with the
TCMS V2. Upload the data from the USB into the TCMS V2 for further processing.
Downloading User Data
Enrollment of user must be done at the Face ID 4 and during enrollment user
data such as name and user ID are inputted. To sync the data in the Face ID 4 and
computer: Menu > USB > Download User
Uploading User Data from USB to Terminal
While an administrator can input user data into the Face ID 4, the rest of the user
information is completed in TCMS V2. Get the latest updates of user information
from TCMS V2 to the Face ID 4 terminal using USB Flash Disk. Menu > USB > Upload User
Uploading User Photo
User photo can be included in user information in TCMS V2. To get the same
photos being displayed when users gets verified, upload the user photo from the
TCMS V2 to Face ID. The size of each photo must be 320 x 240 resolution. To do it
using USB Flash Disk: Menu > USB > Upload User photo
CONTENTS
21
8 • SHORTCUT KEY
Shortcut Keys in Short
Shortcut keys give you quick access to your most used functions. A total of 6
shortcut keys are an available for you to configure. They are labeled with defined
names and displayed on side of the screen.
Configuring Shortcut Keys
Menu > System > Shortcut Definition > Tap on the key one at a time and select the
function you want for the specific key > Save
Some of the functions you can configure for your shortcut keys include status key,
work code, viewing of sms.
22
CONTENTS
9 • AUTO TEST
Who should do the Auto Test?
Auto Test page is to diagnose or analyze the conditions in the Face ID 4. There are
several tests available in the Auto Test page and only an administrator is allowed
to perform the tests. Before running any tests, kindly contact your reseller for
advice or you could email [email protected]
Is the Screen OK?
Test Screen determines the quality and sensitivity of the Face ID 4 touch screen
panel. You will see lines of different colors; click the screen to continue testing. If
there’s a broken line or distorted colors on the screen, kindly send your Face ID 4
for repair. Menu > Auto Test > TFT Test
Checking the Voice Message
Test Voice determines the quality of the Face ID 4’s audio. Every click on the
screen will emit different voice message. If you find any distorted sound in any of
the voice message or instruction, kindly send your Face ID 4 for checking. Menu
> Auto Test > Test Voice
Checking the Infrared Camera
To know the condition of the infrared face scanner, you need to run face test. The
Face ID 4 will display 2 images of your face: color display and infrared. Make sure
both cameras capture and show your face image. Look at the infrared camera
capture image, make sure it is a square in the middle of the screen; you have to
look into the camera. If you can see your image in the square, the camera is working fine. Check the quality status bar to adjust to the best capture image. Otherwise, kindly send your Face ID 4 for checking. Menu > Auto Test > Test Face
Is the Time Accurate?
Time is an essence in the Face ID 4 and it can’t be compromised. The Test Time
will display date, time, 0 (s): 0 (ms). Tap the screen to start the test. The 0 (s): 0
(ms) will start to run and every 10ms change the second to 1. If it doesn’t run well,
kindly send your Face ID 3 for checking. Menu > Auto Test > RTC Test
CONTENTS
23
10 • CALIBRATION
Calibrating Screen Sensitivity to Default Level
Menu > Auto Test > Calibration
The screen will display five dots, one at a time in all corners of the screen and one at
the center. You need to touch the center of the dot for the system to calibrate the
screen automatically. When the process is done, the screen will return to the main
menu.
24
CONTENTS
11 • BELL
Definition of Schedule Bell
Schedule bell is a function to alert employees or users at a certain time based on
your company’s scheduling and preference. For example, a group of employee’s
lunch time is at 10:30a.m while the other group is at 2:00p.m. The Face ID 4 offers
up to 15 schedules you can define.
Menu > Date/Time > Bell > Choose the options that you want to change and change
the value accordingly > Save
Inserting Day and Time to Trigger Schedule Bell
The screen displays 00:00 as default time. A tap on the selected bell will bring you
to another setting page. Input the day/time you want the bell to ring, day. The time
format is 24:00 hours.
Determining the Ring Type of Schedule Bell
The Face ID 4 offers various type of ringtones to choose from. A tap on the ringtone
will change the sound of the bell. Select the one you prefer.
Repetition
How many times do you want the bell to ring? A tap on the value will prompt the
keypad. Input the numbers and the bell will ring according to your settings.
State
You can enable or disable the schedule bell with a tap on Enable/Disable bar.
CONTENTS
25
© 2015 Timetec Computing Sdn Bhd. All rights reserved. • 022015
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement