REED LM-81HT Thermo-Hygrometer Instruction Manual

Below you will find brief information for Thermo-Hygrometer LM-81HT. The REED LM-81HT Thermo-Hygrometer provides accurate readings of temperature and relative humidity. It features a thin-film capacitance humidity sensor, a built-in microprocessor, and user-friendly controls for easy operation.

PDF Download
Document
REED LM-81HT Thermo-Hygrometer Instruction Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Tiny, lightweight design
  • Wristlet for one-hand operation
  • High-precision humidity sensor
  • Built-in microprocessor for accuracy
  • °C/°F selectable
  • Max/Min value memory
  • Hold function
  • Auto power off

Frequently asked questions

1. Turn on the instrument by pressing the "Power Button." 2. The relative humidity and temperature will be displayed on the LCD. Use the "°C/°F Button" to select the desired temperature unit. 3. Allow a few minutes for the meter to stabilize in a new environment.

Press the "Hold Button" to freeze the current readings. Press it again to release the hold function.

Press the "Max./Min. Button" to start the data record function. Then, press the button again to display the maximum or minimum values. To exit the function, press the button for two seconds.

When the low battery symbol appears, replace the 9V battery by opening the battery compartment and installing a new battery.
Preparing document for printing…
0%