Optic Test Instruments

Winyuan Technology Co., Ltd

.

Expert on Test & Measurement

Optical Fiber Test Instruments

Optical Power Meter

PON Optical Power Meter

Optical Light Source

Visual Fault Locator

Optical Multi-meter

Optical Variable Attenuator

Optical Talk Set

Optical Fiber Identifier

Fiber Ranger

http://www.winyuan.com

- 0 -

Winyuan Technology Co., Ltd.

Table of Contents

Expert on Test & Measurement

Optical Fiber Test Instruments

Optical Power Meter---------- ------------------------------------------------------------------------02

PON Optical Power Meter---------------------------------------------------------------------------08

Optical Light Source-----------------------------------------------------------------------------------11

Visual Fault Locator-----------------------------------------------------------------------------------16

Optical Multi-meter-------------------------------------------------------------------------------------19

Optical Variable Attenuator --------------------------------------------------------------------------21

Optical Talk Set -----------------------------------------------------------------------------------------22

Optical Fiber Identifier ---------------------------------------------------------------------------------24

Fiber Ranger(Simplified OTDR)---------------------------------------------------------------------25

Appendix

Introduction of Optical Connector adapter ------------------------------------------------------26

http://www.winyuan.com

- 1 -

New in 2010

Handheld Optical Power Meter---------WY-2007 Series

Expert on Test & Measurement

WY-2007 Handheld Optical Power Meter is newly designed fiber optic tester, it aims at fiber network installation, fiber network engineering acceptance and fiber network maintenance. Combined usage with WY-3007 handheld optical light source, it offers a quick and accurate testing solution on both SM and MM fibers. Compared with usual power meters, the WY-2007 has more great functions/features of automatic wavelength identification and switching and intelligent backlight control. Also the

WY-2007 features good appearance, good touch feeling and considerate humanity design

.

Features

Wave ID

—Automatic wavelength identification and switching (when used with

WY-3007 handheld light source)

Frequency ID/Tone detection---Automatic frequency identification

Intelligent backlight control (light intensity can be adjusted properly according to ambient light, which greatly reduced power consumption)

Data storage function, up to 1000 test records

USB communication port for saved testing records download

Reference power level can be set up and stored

User self calibration function

Auto-off function can be activated or deactivated.

AA alkaline and AC adapter for power supply

Low battery indication

Specifications

WY-2007A WY-2007C Model

Calibrated

( nm

850, 1300,1310,1490,1550,1625

Detector type

Measurement Range

( dBm

Uncertainty (dB) linearity (dB)

Display resolution(dB)

Frequency ID

Hz

Wave ID

( nm

Date storage capacity

Communication Port

Optical Connector type

Alkaline battery

Power Supply Adaptor(V)

Battery Operating time (h)

Operation Temperature(

)

Storage Temperature(

)

Outline size

( mm

/weight

-70

+6

InGaAs

±0.15

3.5%

-50

+26

±0.02

0.01

270

330

1K

2K

1310

1490

1550

1625

1000

USB

FC,SC,ST interchangeable

3*AA

1.5V

8.4

200

-10

+60

-25

+70

180*90*45(250g)

Standard Packages

MODEL INCLUDES

All WY-2007 Models WY-2007 Optical Power Meter, 3pcs 1.5V batteries, AC Adaptor, User Manual, Cotton swabs and Soft carrying case.

http://www.winyuan.com

- 2 -

Optical Power Meter---------WY-2005 Series

Expert on Test & Measurement

WY-2005 optical power meter

Is a handheld optical power meter, which can be used for absolute optical power measurements as well as for relative loss measurements in optical fibers. A Ø1.0mm photosensitive area photodiode is used to significantly improve the stability and the reliability. It features ingenious appearance, a wide range of power measurement, high accuracy, an user self-calibration function and a reference power level storage.

Features

Wide dynamic measurement range (

up to 80dB

)

Reference power level storage(

Ref

Setting)

User self-calibration function

Comfortable LCD display and backlight LCD display supports night operation.

Power measurements in dBm or mw and insertion loss in dB

Optional 10 minutes Auto-off function

AA alkaline batteries can last more than 140 hours, AC adaptor also available

Low battery power indication

Applications

Maintenance in Telecom

Maintenance CATV

Test Lab of Optical Fibers

Other Fiber Optic Measurements

Specifications

MODEL WY-2005A WY-2005B

Wavelength(nm)

Detector Type

Detector Size

Measurement Range (dBm)

Uncertainty

-70~+10

800~1700nm

InGaAs

Ø

1.0mm

±5%

-50~+30

Calibrated Wavelength(nm)

850,1300,1310,1490,1550,1625

Resolution(dB)

Optical Connector

Power Supply

Battery Operating Time

Operating Temperature(

)

Storage Temperature(

)

Relative Humidity

Dimension(mm)

Weight(g)

0.01

FC(interchangeable SC,ST) / as well as 2.5mm universal

Alkaline Battery(3 AA 1.5V batteries); AC Adaptor(9V)

140 h with 1.5V Battery(3pcs)

-10 ~ +60

-25 ~ +70

0 to 95% (non-condensing)

190X100X50

370

Standard Packages

MODEL INCLUDES

All WY-2005 Models WY-2005 Optical Power Meter, 3pcs 1.5V batteries, AC Adaptor, Instruction Manual, Cotton

Tampon and Soft carrying case.

http://www.winyuan.com

- 3 -

Optical Power Meter--------WY-2003 Series

Expert on Test & Measurement

WY-2003 handheld optical power meter

is a compact and an easy-to-use testing instrument for optical fiber networks, which can be used for absolute optical power measurements as well as for relative loss measurements in optical fibers. It features ingenious appearance, wide range of power measurement, high accuracy and user self-calibration function with high performance-to-price ratio.

Features

User self calibration function

Comfortable LCD display and

optional

backlight LCD display supports night operation

Power measurements in dBm or mw and insertion loss in dB

Low battery consumption, more than 240 hours continual operation time for three 1.5V alkaline batteries

Optional 10 minutes Auto-off function

Applications

Maintenance in Telecom

Maintenance CATV

Test Lab of optical fibers

Other Fiber Optic Measurements

Specifications

Type WY-2003A WY-2003B

Wavelength(nm)

Detector

Measurement Range (dBm)

Uncertainty

Calibrated Wavelength(nm)

Resolution(dB)

Optical Connector

Power Supply

800~1700nm

InGaAs

-70~+3 -50~+26

±5%

850,980,1300,1310,1490,1550

0.01

FC(interchangeable SC,ST) / as well as 2.5mm universal

Alkaline Battery(3 AA 1.5V batteries)

Battery Operating Time

Operating Temperature(

)

Storage Temperature(

)

Relative Humidity

Dimension(mm)

Weight(g)

240 h with 1.5V Battery(3)

-10 ~ +60

-25 ~ +70

0 to 95% (non-condensing)

175x82x33

310

Standard Packages

MODEL INCLUDES

All WY-2003 Models WY-2003 Optical Power Meter, Protective Rubber Boot, 3pcs 1.5V batteries, Instruction

Manual, Cotton Tampon and Soft carrying case.

http://www.winyuan.com

- 4 -

Optical Power Meter---------WY-2004 Series

Expert on Test & Measurement

WY-2004 intelligent handheld power meter

is a perfect testing instrument for both laboratory and field applications in optical fibers. It features friendly User Interface with menu operation, automatic frequency identification , large LCD display with backlight and dual-way powering system. The internal microprocessor and linear amplifier technology ensure the long-term accuracy. In addition, WY-2004 has a memory capacity of 240 records and can transfer the measurement data through a RS232 communication port to a PC for printing or editing. Moreover, it can also perform on-line data upload after program control.

Features

Memory capacity of 240 data items; enables data transfer to a PC via

RS232 communication port.

High accuracy and wide dynamic range

Automatic frequency identification

Power measurements in dBm or mw and insertion loss in dB

Low battery indication

Energy-saving design, 10 minutes Auto power off function

Applications

Maintenance in Telecom

Maintenance CATV

Test Lab of optical fibers

Other Fiber Optic Measurements

Specifications

Type WY-2004A WY-2004B

Wavelength(nm)

Detector

Measurement Range (dBm)

Uncertainty

Communication interface

Date storage capacity

Identification Frequency Range

Calibrated Wavelength(nm)

Resolution(dB)

Optical Connector

Power Supply

Battery Operating Time

Operating Temperature(

)

Storage Temperature(

)

Relative Humidity

Dimension(mm)

800~1700nm

InGaAs

-70~+6 -50~+26

±5%

RS232

240 records(Contains Measurement wavelength, Testing value and Time)

10Hz~60KHz

850,980,1300,1310,1490,1550

0.01

FC(interchangeable SC,ST) / as well as 2.5mm universal

Rechargeable Battery + Power Supply Adaptor

21 hours

-10 ~ +60

-25 ~ +70

0 to 95% (non-condensing)

210X115X55

Weight(g)

Standard Packages

MODEL INCLUDES

520

All WY-2004 Models WY-2004 Optical Power Meter, Protective Rubber Boot, Rechargeable battery, Power Supply

Adaptor, Software disk, Data transfer cable(RS232), Instruction Manual and Cotton Tampon.

Rigid hard carrying case can be optional.

http://www.winyuan.com

- 5 -

Optical Power Meter---------WY-2001 Series

Expert on Test & Measurement

WY-2001 mini handheld optical power meter

is the most lightweight and compact in size testing instrument. It features ease-of-use and economy advantages and can be used for absolute power measurement in optical fibers. WY-2001 in combination with the WY-3001 mini handheld light source become the most portable and advantageous testing pair.

Features

The most compact in Size, ideal for field operation

Power measurements in dBm and mw.

Energy-saving design, 10 minutes Auto-off function

Applications

Maintenance in Telecom

Maintenance CATV

Test Lab of optical fibers

Other Fiber Optic Measurements

Specifications

Type WY-2001A WY-2001B WY-2001C WY-2001D

Wavelength(nm)

Detector

Measurement Range (dBm)

Uncertainty

Calibrated Wavelength(nm)

Resolution(dB)

Optical Connector

-60~+3

800~1700nm

InGaAs

-50~+10 -40~+20 -30~+30

±5%

850,980,1310,1550nm

0.01

FC(interchangeable SC,ST) / as well as 2.5mm universal

Power Supply

Battery Operating Time

Operating Temperature(

)

Storage Temperature(

)

Relative Humidity

Alkaline Battery

360 hours with three 1.5V batteries

-10 ~ +60

-25 ~ +70

0 to 95% (non-condensing)

Dimension(mm)

Weight(g)

115X60X20

105

Standard Packages

MODEL INCLUDES

All WY-2001 Models WY-2001 Optical Power Meter, Alkaline battery, Instruction Manual, Cotton Tampon and

Protective Holster.

http://www.winyuan.com

- 6 -

Optical Power Meter---------WY-2002 Series

Expert on Test & Measurement

WY-2002 handheld optical power meter

is the oldest portable test instrument in the Winyuan power meter series. It features compact size, ease-of-use and economy advantages. It can be used for absolute optical power measurements as well as for relative loss measurements of optical fibers. WY-2002 is an essential test instrument in Optical Communications, CATV and other Fiber Optic measurements.

Features

Displays optical power in mW, dB and dBm

Energy-saving design, 10 minutes Auto-off function

Low battery power indication

Applications

Maintenance in Telecom

Maintenance CATV

Test Lab of optical fibers

Other Fiber Optic Measurements

Specifications

Type WY-2002A WY-2002B WY-2002C WY-2002D

Wavelength(nm)

Detector

Measurement Range (dBm)

Uncertainty

Calibrated Wavelength(nm)

Resolution(dB)

Optical Connector

Power Supply

Battery Operating Time

Operating Temperature(

)

Storage Temperature(

)

-70~+3

800~1700nm

InGaAs

-60~+10 -40~+20 -30~+30

±5%

850,980,1310,1550nm

0.01

FC(interchangeable SC,ST) / as well as 2.5mm universal

Rechargeable battery +Power Supply Adaptor

(Alkaline Battery can be optional)

28 hours (Rechargeable battery)

-10 ~ +60

-25 ~ +70

Relative Humidity

Dimension(mm)

0 to 95% (non-condensing)

180x85x30

Weight(g) 305

Standard Packages

MODEL INCLUDES

All WY-2002 Models WY-2002 Optical Power Meter, Protective Rubber Boot, Rechargeable battery, Power

Supply Adaptor, Instruction Manual and Cotton Tampon.

http://www.winyuan.com

- 7 -

New in 2010

PON Optical Power Meter------WY-2006B

Expert on Test & Measurement

WY-2006B PON Optical Power Meter

Is an upgraded version of WY-2006 PON power meter, it aims at the FTTx application and maintenance which not only can be used to test and estimate the signals of the voice, data and video at the same time, but also can be used to test the continues wave light power. The calibrated wavelengths for CW light power measurements includes 850,

1300,1310,1490,1550,1625nm. It is an essential and ideal tester for the construction and maintenance of the PON projects.

Features

Providing simultaneous measurement at all three wavelengths on the fiber (

1490nm,

1550nm,1310nm

)

Used in Burst mode measurement of

1310nm upstream

CW light power measurement is available with wavelengths of

850,1300,1310,1490,1550,1625nm.

VFL Function for quick and efficient Visual Inspection

USB communication port enables data transfer to a PC

1000

measurement items can be saved in WY-2006B PON power meter or computer for data review.

WY-2006B PON power meter offers up to

10

different threshold sets in total; Three status LEDs represent different optical signal conditions of

Pass, Warn and Fail

respectively.

User self-calibration

can be performed and

“Factory Default”

mode can be retrieved in computer through the software.

PON SC standard connector, easy to test, other type connector port can be required on customer requests.

Backlight LCD display supports night operation.

10 minutes Auto-off function can be activated or deactivated with keypad operation.

Technical Specification

PON module:

Model

WY-2006B

1310 upstream measurement

Pass Zone(nm)

[email protected]/1550(dB)

Measurement Range(dBm)

1490 downstream measurement

Pass Zone(nm)

Isolation @ 1550nm(dB)

[email protected] 1310nm(dB)

Measurement Range(dBm)

1550 downstream measurement

Pass Zone(nm)

Isolation at 1490nm(dB)

1260

1360

>40

-40

+10

1470

1505

>30

>40

-40

+12

1535

1570

>40

http://www.winyuan.com

- 8 -

Isolation at 1310nm(dB)

Measurement Range(dBm)

Measurement Accuracy

Connatural uncertainty(dB)

Linearity(dB)

Passing through insertion Loss(dB)

General Information

Detector Type

Optical Connector

Fiber Type

Display

Measurement Unit

Resolution (dB)

Operation Voltage(V)

Power Supply

Continuously Operation time (h)

>40

-40

+25

±0.5

±0.1

<1.5

Expert on Test & Measurement

InGaAs

FC/SC/ST Interchangeable

9/125um

LCD:128*64 dB/dBm/xW

0.01

DC 3.3

5.5

3 AA1.5V battery

PON Power Meter Mode

90h

Normal Optical Power Meter Mode

100h

VFL Mode

50h

Operation Temperature(

)

Storage temperature(

)

Weight(kg)

-10

60

-25

70

500g

Note: The operation time of the battery are all for the instrument that do not turn on backlight, if the backlight turn on the operation time will be shorted.

Normal Optical Power Meter Module

Measurement Accuracy

Connatural uncertainty(dB)

Linearity(dB)

Measurement Range(dBm)

±0.25

±0.1

-70

+6 or -50~+26

General Information

Measurement Unit

Resolution (dB)

Calibration Wavelength(nm)

Detector Type

Optical Connector dB/dBm

0.01

850,1300,1310,1490,1550,1625

InGaAs

FC/SC/ST Interchangeable/2.5 universal adapter

9/125um Fiber Type

VFL Module

Output Power(mW)

Wavelength(nm)

Optical Connector

1mw

650

FC/2.5 universal connector

http://www.winyuan.com

- 9 -

PON Optical Power Meter---------WY-2006

Expert on Test & Measurement

This new

PON power meter WY-2006

aims at the FTTx application and maintenance which can be used to test and estimate the signals of the voice, data and video at the same time. It is an essential and ideal tool for the construction and maintenance of the PON projects.

Features

Providing simultaneous measurement at all three wavelengths on the fiber (

1490nm, 1550nm,1310nm

)

Used in Burst mode measurement of

1310nm upstream

USB communication port enables data transfer to a PC

1000

measurement items can be saved in WY-2006 PON power meter or computer for data review.

WY-2006 PON power meter offers up to

10

different threshold sets in total; Three status

LEDs represents different optical signal conditions of

Pass, Warn and Fail

respectively.

User self-calibration

can be performed and

“Factory Default”

mode can be retrieved in computer through the software.

PON SC standard connector, easy to test

Backlight LCD display supports night operation.

Optional 10

minutes auto-off function and low battery indication.

Specifications

Item Specifications

1310nm upstream measurement

Pass zone (nm) 1260~1360

Isolation @1490/1550nm(dB) >40

Measurement Range (dBm) -40~+10

1490nm downstream measurement

Pass zone (nm) 1470~1505

Isolation @1550nm(dB) >30

Isolation @1310nm(dB)

Measurement Range (dBm)

>40

-40~+10

Ordering Information

1550nm downstream measurement

MODEL INCLUDES

Pass zone (nm) 1535~1570

WY-2006

WY-2006 PON Power

Isolation @1490nm(dB) >40

Isolation @1310nm(dB) >40

Meter, Protective Rubber

Measurement Range (dBm) -40~+20

Boot,

Measurement Accuracy

Rechargeable battery,

Connatural Uncertainty (dB)

Power Supply Adaptor,

Linearity (dB)

Passing through insertion Loss (dB)

General Information

±

0.5

±

0.1

<1.5

Instruction Manual and

Cotton Swabs,

USB Cable,

Display Graphic display, Resolution is : 128*64

Rigid carrying case can

Measurement Unit

Resolution

DBm, dB, mW, and uW

0.01dB be optional.

Fiber Type

Input Power Range

Rechargeable Battery

AC adaptor

Operating Temperature

Storage Temperature

Dimensions

9/125um

DC 6.5V~8.5V

7.4V

8.4V

-10

~ +60

-25

~ +70

210X115X55

http://www.winyuan.com

- 10 -

Handheld Adjustable Light Source---------WY-3007 Series

Expert on Test & Measurement

WY-3007 Handheld Adjustable Light Source

is a newly designed fiber optic tester, it aims at fiber network installation, fiber network engineering acceptance and fiber network maintenance. Combined usage with WY-2007 handheld optical power meter, it offers a quick and accurate testing solution on both SM and MM fibers. The WY-3007 provides 1 to 4 wavelengths and output power can be adjustable on customer requests. Also the WY-3007 features good appearance, good touch feeling and considerate humanity design.

Features

Wave ID information can be transmitted when used with JW3216 Optical Power Meter.

Tone generation, 270HZ,330HZ,1KHZ,2KHZ

Output power can be adjustable

Output power value is shown on LCD display

Intelligent backlight control (light intensity can be adjusted properly according to ambient light, which greatly reduced power consumption)

AA alkaline and AC adapter for power supply

Low battery indication

Specifications

Model

Operating wavelength

( nm

Applicable fiber

Laser type

Output Power

( dBm

Adjustable step size

( dBm

Stability(dB

30min

20

)

Modulation

Hz

Fiber Port

Alkaline Battery

Power Supply Adaptor(V)

Battery Operating time(h)

WY-3007

1310/1550;1310/1490/1550/1625

( others specify on requests

SM

MM

FP-LD(others specify on requests)

-7

( can be adjustable

0.5

0.15

CW

270

330

1K

2K

FC/PC

3*AA

1.5V

8.4

45

-10

+60

Operation Temperature(

)

Storage Temperature(

)

Outline size

( mm

/weight

-25

+70

180*90*45(250g)

Standard Package

MODEL INCLUDES

All WY-3007 Models WY-3007 Optical Light Source, 3pcs 1.5V batteries, AC Adaptor, User Manual, Cotton swabs and Soft carrying case.

http://www.winyuan.com

- 11 -

Optical Light Source---------WY-3005 Series

WY-3005 optical light source

Expert on Test & Measurement

Is a handheld optical light source.

It can provide

1 to 6

wavelengths output to satisfy specific requirements including the

650nm visible light source and the 1310/1550nm wavelengths for single mode fiber or the 850/1300nm wavelengths for multimode fiber, as well as other wavelengths according to customer’s needs. Together with the WY-2005 optical power meter, it is a perfect solution for fiber optic network applications.

Features

Provides 1~6 wavelengths output which can be optional according to customers’ needs

CW, 2Hz modulation output at 650nm, and CW, 270Hz,1KHz,2KHz modulation output at other wavelengths.

High stability of the output power and stable output wavelength

Backlight LCD display supports night operation

Low battery power indication

Applications

Maintenance in Telecom

Maintenance CATV

Test Lab of optical fibers

Other Fiber Optic Measurements

Specifications

Type WY-3005

Wavelengths(nm) Provides 1~6 Wavelengths according to needs.

Emitter Type

Typical Output Power(dBm)

Spectral Width(nm)

Output Stability

Modulation Frequencies

Optical Connector

Power Supply

Battery Operating Time(hour)

Operating Temperature(

)

Storage Temperature(

)

Dimension(mm)

FP-LD,LED

[email protected] / -7 @1310nm,1550nm, -20dBm for LED

10

±0.05dB/15mins; ±0.1dB/ 8hours

[email protected] / CW,270Hz,1KHz,[email protected],1550nm

Alkaline Battery(3 AA 1.5V batteries); AC Adaptor(9V)

45

-10~+60

-25~+70

190X100X50

Weight(g)

Winyuan Recommendation

370

WY-3005

Handheld Light Source is designed for optimal use with

WY-2005

Optical Power Meter for measuring optical loss on both single mode and multimode fiber cable.

Standard Package

MODEL INCLUDES

All WY-3005 Models WY-3005 Optical Light Source, 3pcs 1.5V batteries, AC Adaptor, Instruction Manual,

Cotton Tampon and Soft carrying case.

http://www.winyuan.com

- 12 -

Optical Light Source---------WY-3003 Series

Expert on Test & Measurement

WY-3003 optical light source

can provide 1 to 4 output wavelengths to meet specific requirements, including the 650nm red source and the 1310/1550nm wavelengths for single mode fiber or the 850/1300nm wavelengths for multimode fiber, as well as other wavelengths according to customer needs. Together with the WY-2003 optical power meter, it is a perfect solution for the fiber optic network characterization.

Features

Provides 1~4 output wavelengths which can be optional according to customer’s needs

CW, 2Hz modulation output at 650nm, and CW, 270Hz,1KHz,2KHz modulation output at other wavelengths.

High stability of the output power

Stable output wavelength

Backlight LCD display supports night operation

Compact size and decent appearance

Large LCD, easy operation

Applications

Maintenance in Telecom

Maintenance CATV

Test Lab of optical fibers

Other Fiber Optic Measurements

Specifications

Type

Wavelengths(nm)

Emitter Type

Typical Output Power (dBm)

Spectral Width(nm)

Output Stability

Modulation Frequencies

650

0

CW,2Hz

WY-3003

1310/1550 850/1300 850/1300/1310/1550

FP-LD,LED or others please specify

-7dBm for LD, -20dBm for LED

1.

10

±0.05dB/15mins; ±0.1dB/ 8hours

CW,270Hz,1KHz,2KHz

Optical Connector FC/ universal adaptor FC/PC

Power Supply

Battery Operating Time(hour)

Operating Temperature(

)

Storage Temperature(

)

Dimension(mm)

Weight (g)

Alkaline Battery(3 AA 1.5V batteries)

45

-10~+60

-25~+70

175x82x33

295

Winyuan Recommendation

WY-3003

Handheld Light Source is designed for optimal use with

WY-2003

Optical Power Meter for measuring optical loss on both single mode and multimode fiber cable.

Standard Packages

MODEL INCLUDES

All WY-3003 Models WY-3003 Optical Light Source, Protective Rubber Boot, 3pcs 1.5V batteries, Instruction

Manual, Cotton Tampon and Soft carrying case.

http://www.winyuan.com

- 13 -

Optical Light Source---------WY-3004 Series

WY-3004 advanced stability handheld optical light source

Expert on Test & Measurement

Is designed specially aim at users with high requirements. With features of durable structure, large LCD display with backlight and friendly operation interface, the WY-3004 advanced stability handheld optical light source provides a lot of convenience for your field work. High stability of output power and quite stable output wavelength, it is an ideal instrument for optical network installation, trouble shooting, maintenance and other optical fiber related systems.

Features

Provides dual-wavelengths output and wavelengths can be optional according to customer’s needs

CW, 270Hz,1KHz,2KHz modulation frequency output

High stability of the output power

Stable output wavelength

Backlight LCD display supports night operation

Large LCD, easy operation

Applications

Maintenance in Telecom

Maintenance CATV

Test Lab of optical fibers

Other Fiber Optic Measurements

Specifications

Type WY-3004

Wavelengths(nm)

Emitter Type

Output Power(dBm)

Spectral Width(nm)

Output Stability

Modulation Frequencies

Optical Connector

Power Supply

Battery operating time(hour)

Operating Temperature(

)

Storage Temperature(

)

Dimension(mm)

Weight (g)

1310/1550 850/1300

FP-LD

-7~-6

10

±0.05dB/15mins; ±0.1dB/ 8hours

CW

2Hz

270Hz

1KHz

2KHz

FC/ PC

Rechargeable battery + Power Supply Adaptor

15

-10~+60

-25~+70

210x115x55

515

Winyuan Recommendation

WY-3004

Handheld Light Source is designed for optimal use with

WY-2004

Intelligent Optical Power Meter for measuring optical loss on both single-mode and multimode fiber cable and aim at the high requirements of the users.

Standard Packages

MODEL INCLUDES

All WY-3004 Models WY-3004 Optical Light Source, Protective Rubber Boot, Rechargeable battery, Power Supply

Adaptor, Instruction Manual and Cotton Tampon. Rigid hard carrying case can be optional.

http://www.winyuan.com

- 14 -

Optical Light Source---------WY-3001 Series

Expert on Test & Measurement

WY-3001 Mini optical light source

is the most rugged small size instrument in the industry. It integrates super small size and strong function in one unit. With 3 pieces of 1.5V alkaline batteries, it can work continuously for more than 40 hours. The total weight is only 110g. Together with the WY-2001 Mini optical power meter, it provides an excellent solution for fiber optic network and for field work.

Features

High stability of the output power

Economic type, easy to use

Matched with the WY-2001 mini power meter, it constitutes the smallest optical loss test kit, perfect for field testing

Applications

Maintenance in Telecom Maintenance CATV

Test Lab of optical fibers

Other Fiber Optic Measurements

Specifications

Type WY-3001

Wavelengths(nm) 1310 or 1550

Emitter Type

Output Power(dBm)

Spectral Width(nm)

Output Stability

Optical Connector

Power Supply

Battery operating time(hour)

Operating Temperature(

)

Storage Temperature(

)

FP-LD

-7~-6

10

±0.05dB/15mins; ±0.1dB/ 8hours

FC/PC

3pcs 1.5V alkaline batteries

40

-10~+60

-25~+70

Dimension(mm)

Weight (g)

115X60X20

110

Winyuan Recommendation

WY-3001 Handheld Light Source is designed for mini portfolio with WY-2001 Optical Power Meter for measuring optical loss on both single mode and multi mode fiber cable.

Standard Packages

MODEL INCLUDES

All WY-3001 Models WY-3001 Optical Light Source, Alkaline battery, Instruction Manual, Cotton Tampon and

Protective Holster.

http://www.winyuan.com

- 15 -

Visual Fault Locator(VFL)---------WY-652

Expert on Test & Measurement

WY-652 Visual Fault Locator

A very economic visual fault locator adaptors the 650nm wavlength laser, it is an ideal tools for the fiber checking

.

Features

Smaller size and economic

Easy to operate

CE passed

Applications

Maintenance in Telecom

Maintenance CATV

Fiber Optic Lab Testing

Other Fiber Optic Measurements

Specifications

Type WY-652

Wavelengths(nm)

Fiber Model

Output Power

Spectral Width(nm)

650±10nm

SM,MM

>0

≤5

Emission

Optical Connector

Power Supply

Battery Operating Time

Operating Temperature(

)

Storage Temperature(

)

Dimension(mm)

Weight

(g)

Remark: Pen-type VFL can be provided!

Standard Packages

MODEL INCLUDES

CW, 2Hz

FC/ Universal 2.5mm adaptor

2pcs AA alkaline batteries

40 hours

-10~+60

-25~+70

100X30X18

60

WY-652 WY-652 Visual Fault Locator, Alkaline battery, User Manual, Cotton swabs and Protective

Holster.

http://www.winyuan.com

- 16 -

Visual Fault Locator(VFL)---------WY-650

Expert on Test & Measurement

WY-650 Visual Fault Locator

is used for the measurement in single-mode or multi-mode fibers. It features a rugged design, an universal connector and an accurate measurement. The WY-650 visual fault locator easily identifies the cutting, micro-bending of the optic fiber, passes through the jacket fiber and performs an end-to-end fiber identification. Its measurement range is up to 5km. It is an ideal tool for the examination of all kinds of patch cords and ribbon or bunched pigtails in the installation and maintenance of fiber optic networks.

Features

Detects breaks, micro-bends even through jacketed fibers

End-to-end visual fiber identification

Locates faults up to 5km along the fiber.

Mechanical fusion splice optimization

Compact size and light weight, suitable for field testing

Applications

Maintenance in Telecom

Maintenance CATV

Test Lab of optical fibers

Other Fiber Optic Measurements

Specifications

Type WY-650

Wavelengths(nm)

Fiber Model

Output Power

Spectral Width(nm)

Emission

Optical Connector

Power Supply

650±10nm

SM,MM

1mw

5

CW, 2Hz can be optional

FC/ Universal 2.5mm adaptor

2pcs AA alkaline batteries

Battery Operating Time

Operating Temperature(

)

Storage Temperature(

)

Dimension(mm)

Weight

(g)

Standard Packages

MODEL

WY-650

30 hours

-10~+60

-25~+70

100X50X25

50

INCLUDES

WY-650 Visual Fault Locator, Alkaline battery, Instruction Manual, Cotton Tampon and

Protective Holster.

http://www.winyuan.com

- 17 -

Pen-Type Visual Fault Locator(VFL)-----WY-651

The WY-651 Pen type VFL

Expert on Test & Measurement is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical network. It includes:

Finding the breakpoint, poor connections, bending or cracking in fiber optic cables.

Finding the faults of OTDR dead zone

End-to-end visual fiber identification

Features

2.5mm universal connector, for 1.25mm connectors, FC (Male)-LC (Female) adapter can be provided on requests.

Operates either in CW or Pulsed

Constant output power

Lower Battery warning

Long battery life (up to 60 hours)

Crash-proof and dust-proof design for laser head

Laser case ground design prevents ESD damage

Burning testing to ensure the reliability.

Portable and rugged, easy to use

Specifications

Type WY-651 Pen-type Visual Fault Locator

Central Wavelength

Emitter Type

Output Power

Optical Connector

650nm

±

10nm

FP-LD

1mw, 3mw, 10mw can be optional on customer request

2.5mm universal connector

For 1.25mm connectors, FC (Male)-LC (Female) adapter can be provided on customer requests

Operating Model Both CW and Pulse available

Pulse Frequency

Power Supply

Battery Operating Time

Operating Temperature

2~3Hz

2 AA alkaline batteries

[email protected]

65hour

[email protected]

50hour

[email protected]

30hour

[email protected]

15hour

Test with Panasonic LR6 AA ALKALINE battery

-10~+45 (

)

-40~+70 (

)

15X180

Storage Temperature

Dimension (mm)

Weight

Standard Packages

MODEL INCLUDES

120g(Without battery)

WY-651 Main unit, 2pcs Alkaline battery, Instruction Manual, Cotton swabs and Nylon Soft Carrying case.

http://www.winyuan.com

- 18 -

Optical Multi-meter---------WY-4002 Series

Expert on Test & Measurement

WY-4002 handheld optical multi meter

integrates the functions of an intelligent optical power meter module and of a highly stable light source module in one unit which can perform closed-loop tests by incorporating both modules. Individual regimes of operation can also be manually chosen using menu operation to switch functions. A perfect combination to make your optical fiber tests a lot more convenient

.

Features

Includes all the outstanding functions of handheld intelligent power meter(WY-2004)

Includes all the outstanding functions of handheld stable light source(WY-3004)

Switching of the power meter function and that of the light source by menu operation

Different light sources and power meters can be built into WY-4002

Applications

Maintenance in Telecom

Maintenance CATV

Test Lab of optical fibers

Other Fiber Optic Measurements

Specifications

Type WY-4002A WY-4002B

Optical Power Meter Module

Detector Type

Measurement Range(dBm)

Uncertainty

Calibrated wavelengths(nm)

-70~+6

IngaAs

5%

-50~+26

Resolution(dB)

Data Storage Capacity

Identification Frequency Rang

Optical Connector

Optical Light Source Module

Emitter Type

Wavelengths

Output Power(dBm)

Spectral Width

Output Stability

850,980,1300,1310,1490,1550

0.01

240 data items

10Hz~60KHz

FC(interchangeable SC,ST)

FP-LD

1310/1550(other wavelengths can be optional)

-7

10nm

±0.05dB/15mins; ±0.1dB/ 8hours

Standard Packages

Modulation Frequencies

Optical Connector

270Hz, 1KHz, 2KHz

MODEL INCLUDES

FC/ PC

WY-4002 WY-4002 Multi-meter

General Specifications of Multi Meter

Power Supply

Communication Interface

Battery Operating Time

Models Protective Rubber

Rechargeable Battery + Power Supply Adaptor

Rechargeable battery

Power Supply Adaptor

6 hours(Both Power Meter and Light Source are working)

RS232

28hours(Only Power Meter is working)

Software Disk

Auto-off time 10mins

Data upload Cable RS232

Operating Temperature(

) -10~+60

Instruction Manual

Storage Temperature(

) -25~+70

Cotton Tampon

Dimension(mm) 210x115x55

Rigid hard carrying case

Weight (g) 540 can be optional

http://www.winyuan.com

- 19 -

Optical Multi-meter---------WY-4001 Series

WY-4001 Handheld Optical Multi Meter

Expert on Test & Measurement integrates both an optical power meter module and an optical light source module and can perform closed-loop tests by using both modules, and can also work individually. It is specifically designed for technical support personnel to test a variety of instruments with a single meter and thus satisfy the user by providing a choice of greater convenience and more advantages.

Features

Includes all the outstanding functions of the handheld power meter (WY-2002)

Includes all the outstanding functions of the handheld stable light source(WY-3002)

Perfect combination to make your fiber measurements more convenient.

Different light sources and power meters can be built into WY-4001

Applications

Maintenance in Telecom

Maintenance CATV

Test Lab of optical fibers

Other Fiber Optic Measurements

Specifications

Type WY-4001A WY-4001B WY-4001C

Optical Power Meter Module

Detector Type

Measurement Range(dBm)

Uncertainty

Calibrated wavelengths(nm)

Resolution(dB)

-70~+3

IngaAs

-60~+10 -30~+20

5%

850,980,1310,1550nm

0.01

WY-4001D

-20~+30

Optical Connector FC(interchangeable SC,ST)

Optical Light Source Module

Emitter Type

Wavelengths

Output Power(dBm)

Spectral Width

Output Stability

Optical Connector

FP-LD

1310/1550(other wavelengths can be optional)

-7

10nm

±0.05dB/15mins; ±0.1dB/ 8hours

FC/ PC

General Specifications of Multi Meter

Power Supply

Battery Operating Time

Auto-off time

Operating Temperature(

)

Storage Temperature(

)

Dimension(mm)

Weight (g)

Standard Packages

MODEL INCLUDES

Rechargeable Battery + Power Supply Adaptor

4 hours(Both Power Meter and Ligh Source are working)

28hours(Only Power Meter is working)

10mins

-10~+60

-25~+70

180X85X30

340

All WY-4001 Models WY-4001 Optical Multi-meter, Protective Rubber Boot, Rechargeable battery, Power Supply

Adaptor, Instruction Manual and Cotton Tampon.

http://www.winyuan.com

- 20 -

Optical Variable Attenuator (OVA)----------WY-6001

Expert on Test & Measurement

The WY-6001 handheld optical variable attenuator

is used for continuously variable optical signal attenuation. As the attenuator is used in the laser system for the on-line testing, there, therefore WY-6001 can be used in the digital system of communication devices (such as: PDH, SDH) and also in the system of adopting analog modulation (CATV)

Application

Telecom Maintenance

CATV Maintenance

Comprehensive cable construction system

Optical instruments research and development

Optical communication education and lab testing

Other optical project

Features

 stepwise attenuating by circum gyrated dial: attenuating step 0.05dB

Provide with the function of displaying dB and dBm attenuating value

Alternative function of 10 minutes Auto-off without operation

After off the instruments, the system will have the memorizing of the attenuating value and the attenuating step, in order to restore the system back to the previous shut down state when open the instruments next time

Specification

Type

Attenuating wavelength Range

Fiber Model

Optical Connector

Calibrated wavelengths

Measurement Range

Resolution

Minimize Insertion Loss

Linearity

Repeating

Attenuating Accuracy

Return Loss

Max input

Displaying type

Rechargeable batteries

Power supply adaptor

Operation temperature

Storage temperature humidity

Weight

WY-6001

1260~1650nm

9/125um SM

FC/PC (FC/APC, SC/PC, SC/APC optional)

1310/1490/1550/1625nm

2.5~60dB

0.05dB

2.5dB

±0.5dB

±0.2dB

±0.8dB

35dB

( typical value40dB

20dBm lattice 128*64 black and white, white back ground light

7.4V

7~8.5V

0~40

-10~60

0~85%

( non- condensation

450g

Standard Packages

MODEL INCLUDES

WY-6001 all models WY-6001 Optical Variable Attenuator, Rechargeable 7.4V battery, Charger, Power Adaptor

8.5V, Instruction Manual and Cotton tampon, Soft Carrying Case.

http://www.winyuan.com

- 21 -

Optical Talk Set----------WY-5001

Expert on Test & Measurement

WY-5001 Optical Talk Set

is an intelligent and efficient instrument that combines in one set the functions of both a digital optical phone and a stabilized light source. It is widely used in operations of installation, optical testing, maintenance and fiber attenuation value testing in data network, CATV and Telecommunication network. The WY-5001 Talk Set can carry out full-duplex communication with high quality connection and not be affected by distance.

Features

Full-duplex digital communication with high quality conversation connection and low background noise

Together with Optical Clip-on Coupler, enables on line communications available

Combining functions of both a digital optical phone call and a stabilized light source.

Large LCD display with backlight

Low battery power indication

Applications

Maintenance in Telecom

Maintenance CATV

Test Lab of optical fibers

Other Fiber Optic Measurements

Specifications

Type WY-5001

Wavelength(nm)

Emitter Type

Transmission Distance

Dynamic Range

Output Power

Output Stablity

Power Supply

Battery Operating Time

Optical Connector

Operating Temperature(

)

Storage Temperature(

)

Dimension(mm)

Weight

(g)

1310/1550

FP-LD

80km

40dB

-5~-7dBm(9/125um), CW or 2KHz, 1KHz, 270Hz Modulation

±0.1dB/±0.25dB(1/8hrs) CW

Rechargeable Battery + Power Supply Adaptor

5 hours

FC/PC

-10 ~ +60

-25 ~ +70

215X115X55

520

Remark: Winyuan also provides Fiber Optic Clip-on Coupler device according to customers needs.

Standard Packages

MODEL INCLUDES

WY-5001 WY-5001 Optical Talk Set(pair), Protective Rubber Boot, Headset, Rechargeable battery,

Power Supply Adaptor, Instruction Manual, Cotton Tampon and soft carrying case.

http://www.winyuan.com

- 22 -

Optical Talk Set----------WY-5002

Expert on Test & Measurement

WY-5002 Optical Talk Set

is an intelligent and efficient instrument that combines in one set the functions of both a digital optical phone and a stabilized light source. It is widely used in operations of installation, optical testing, maintenance and fiber attenuation value testing in data network, CATV and Telecommunication network. The WY-5002 Talk Set can carry out full-duplex communication with high quality connection and not be affected by distance.

Features

Full-duplex digital communication with high quality conversation connection and low background noise

Together with Optical Clip-on Coupler, enables on line communications available

Combining functions of both a digital optical phone call and a stabilized light source.

Large LCD display with backlight

Low battery power indication

Applications

Maintenance in Telecom

Maintenance CATV

Fiber Optic Lab Testing

Other Fiber Optic Measurements

Specifications

Type WY-5002

Wavelength(nm)

Emitter Type

Transmission Distance

Dynamic Range

Output Power

Output Stability

Power Supply

Battery Operating Time

Optical Connector

Operating Temperature(

)

Storage Temperature(

)

Dimension(mm)

Weight

(g)

1310/1550

FP-LD

≥80km

40dB

-5~-7dBm(9/125um), CW or 2KHz, 1KHz, 270Hz Modulation

±0.1dB/±0.25dB(1/8hrs) CW

Rechargeable Battery + Power Supply Adaptor

5 hours

FC/PC

-10 ~ +60

-25 ~ +70

215X115X55

520

Remark: Winyuan also provides Fiber Optic Clip-on Coupler device according to customers needs.

Standard Packages

MODEL INCLUDES

WY-5002 WY-5002 Optical Talk Set (pair), Protective Rubber Boot, Headset, Rechargeable battery,

Power Supply Adaptor, User Manual, Cotton swabs and soft carrying case.

http://www.winyuan.com

- 23 -

Optical Fiber Identifier (OFI)---------WY-9001

Expert on Test & Measurement

WY-9001 Optical Fiber Identifier

can quickly identify the direction of transmitted fiber and display the relative core power without any damages to the bended fiber. When the traffic is present,the intermittently audible tone is activated.

The WY-9001 optical fiber identifier also recogize the modnulation like,270Hz,1kHz and 2kHz .When they are used to detect the frequency, the continuously audible tone is activated.There are four adapter heads available: Ø0.25, Ø0.9, Ø2.0 and Ø3.0. The JW3306B optical fiber identifier is powered by a 9V alkaline battery .

Features

Easy-touse with “ONE KEY” operation.

Efficiently identifies the traffic direction and frequency tone (270Hz, 1KHz, 2KHz) with audible warning, and Lower power indication

Displays the relative core power

More accurate test with Sunshade

Easy-to-replace adaptors

Durable metal housing and quality construction

Specifications

Type

Identified Wavelength Range

Identified Signal Type

Detector Type

Adapter Type

Signal Direction

WY-9001

800-1700 nm

CW, 270Hz±5%

1kHz±5%

2kHz±5%

Ø1mm InGaAs 2pcs

Ø0.25 (Applicable for Bare Fiber)

Ø0.9 (Applicable for Ø0.9 Cable )

Ø2.0 (Applicable for Ø2.0 Cable ), Ø3.0 (Applicable for Ø3.0 Cable )

Left & Right LED

Singe Direction Test Range

(dBm, CW/0.9mm bare fiber)

-46~10(1310nm)

-50~10(1550nm)

Signal Power Test Range

(dBm, CW/0.9mm bare fiber)

Signal Frequency Display (Hz)

-50~+10

Frequency Test Range

(dBm, Average Value)

Insertion Loss(dB, Typical Value)

Alkaline Battery(V)

Operating Temperature(

)

Storage Temperature(

)

Ø0.9, Ø2.0, Ø3.0

Ø0.25

270, 1k, 2k

-30~0 (270Hz,1KHz)

-25~0 (2KHz)

-25~0 (1KHz,2KHz)

-20~0 (2KHz)

0.8 (1310nm)

2.5 (1550nm)

9

-10

+60

-25

+70

Dimension (mm) 196X30.5X27

Weight (g) 200

Standard Packages

MODEL INCLUDES

WY-9001 WY-9001 Optical Fiber Identifier, 4pcs adapter heads, Alkaline battery, Instruction Manual,

Cotton Tampon and Soft Carrying case.

http://www.winyuan.com

- 24 -

Optical Cable Fault Locator

Fiber Ranger

----WY-7002

Expert on Test & Measurement

WY-7002 Optical Fiber Ranger

is the most portable test instrument in the industry. It adopts the OTDR technical principles and integrates the powerful analysis software, which enables the WY-7002 fiber ranger detect fiber faults location more accurate and easy.

Main Features

Portable, rugged, lightweight; Easy to use.

More accurate testing results and better repeatability.

Up to

8

fiber faults can be detected in each measurement.

Automatic Pulse Width Control design to ensure a convenient operation.

Easy to identify the faults location.

Built-in visual fault locator (VFL), conveniently to find the faults in dead zone.

Dust, water and shock proof, designed for field use

Long battery life, up to 5000 measurements operation.

Applications

Testing the distance of the fiber and identify the faults location in the fiber link.

Locates reflective and non-reflective breaks in the fiber network.

Inspection of fiber repair and maintenance.

WY-7002 Fiber Ranger is ideal to be used in FTTx network installation and maintenance.

Specifications

Model

Operating Wavelength

Fiber Type

WY-7002

1550nm

1310nm Optional

9/125um SM Fiber

Optical Connector Type

Detector Type

Peak Power of laser

Max. Displaying

Distance

Reflection Event

Non-reflection Event

Measurement Unit

Reflection Event Dead Zone

Distance Accuracy

Reflection Event

Wavelength of VFL Option

Output Power of VFL Option

FC/PC

InGaAs

≥60mW

60km (≥1dB)

20km (

≥2.5dB) m

15m

±

2m+2*10

-3

*Distance

650nm

>=1mW

Power Supply

Battery Operating Time

Working Temperature

Storage Temperature

Humidity

Alkaline Battery (3pcs AA 4.5V Batteries)

≥5000 measurements

-5~40

-10~60

0~85%

Non-condensation

190*100*50mm Dimensions

Weight

( g

Standard Packages

MODEL INCLUDES

WY-7002

450

WY-7002 Fiber Ranger, 3pcs 1.5V batteries, User Manual, Cotton swabs and Soft carrying case.

http://www.winyuan.com

- 25 -

Optical Connector Introduction

For Power Meters & Light Sources

Optical Adapters for Optical Power Meter Output

Expert on Test & Measurement

Option 1: FC, SC, ST Interchangeable / 2.5mm universal connector adapter Port

is the most commonly used connector type for Winyuan Optical power meters. It features:

a) Interchangeable FC, SC, ST connector adapters,

which means the user can choose any of the FC, SC, ST adapters to be fixed well with the connectors. Changing the adapter is very simple: unscrew one and screw in the next. Please refer to the picture below for a better understanding.

b) 2.5mm Universal connector adapter.

After unscrewing any of the interchangeable connector adapters, the user will see a fixed 2.5mm metal plug which we call a 2.5mm universal connector adapter. It can accept most of the 2.5mm diameter ferrule connectors, such as FC,SC, ST,DIN, E2000 and SMA. It means that with one plug a variety of connectors can be connected as long as the ferrule diameter is 2.5mm. These connectors however use only a

push/pull mechanism

and cannot to be fixed or screwed. Please refer to the right picture for a better understanding.

Note:

Usually, if no customer special requests, we will use this type connector port as the standard adaptor for our Handheld optical power meters.

Option 2: LC, SC, ST, FC Interchangeable adapters Port (No Universal Adapter Available)

To meet the requirements of the LC connector type, we specially released the

Option 2

interchangeable connector adapters. It features:

a) LC, SC, ST, FC connector adapters can be interchangeable

, which means the user can choose any one of LC,SC ,ST and FC adapters to be fixed well with the connectors. Changing the adapter is very simple, unscrew one and screw in the next.

Please refer to the picture below for a better understanding.

b)

No universal connector adapter available.

Please refer to the pictures below for a better understanding!

Optical Adapters for Light Source Output

Option 1: FC fixed connector Port

FC fixed connector port type is the most commonly used in Optical Light Sources with features of reliability and high accuracy in measurement!

Note:

Usually, if no customer special requests, we will use this type connector port as the standard adaptor for our Handheld optical Light Source.

Option 2: FC, SC, ST interchangeable connector Port

FC, SC, ST connector adapters can be interchangeable

, it means the user can choose any one of FC,SC ,ST adapters to be fixed well with the connectors. Changing the adapter is very simple, unscrew one and screw in the next. Please refer to the picture below for a better understanding.

Note:

Connecting directly with the 2.5 ceramic ferrule is not recommended in order to avoid any damage of the ceramic ferrule. Please connect with connectors after screwing the corresponding connector adapter.

To satisfy with customers’ various requests for adaptors, we also can supply custom made adapters according to customers’ special requests. Detailed adapter pictures cannot be shown here individually, so please feel free to ask us if what you require is not presented here!

http://www.winyuan.com

- 26 -

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement