12

WET-DRY-BLOW VACUUM SYSTEM

®

USER GUIDE

DOUBLE-UP YOUR GUARANTEE!

SCAN* TO REGISTER YOUR

EXTRA 1 YEAR GUARANTEE

* HOW? IT’S SIMPLE REALLY…

• SWITCH ON YOUR MOBILE CAMERA & POINT

IT AT THE QR CODE & TAP THE LINK THAT

POPS UP

• IF THAT DOESN’T WORK, YOU’LL NEED TO

DOWNLOAD & USE A QR CODE SCANNER

APP FROM YOUR PHONE’S APP STORE

Thank you for purchasing a BENNETT READ

TOUGH 12 wet & dry vacuum.

Your BENNETT READ TOUGH 12 vacuum incorporates the latest technological advances in home cleaning systems. It imitates the most powerful forces of nature in a compact, robust cleaning system to ensure that your home is easily and properly cleaned.

Your BENNETT READ TOUGH 12 comes with a 1 year guarantee. If you register your guarantee online within 14 days of purchase, we will extend the guarantee to 2 years. To activate your extended guarantee, scan the QR code on the front cover of this user guide, tap on the link and complete the online form. Alternatively, visit www.tevo.co.za

, click the “Register guarantee” tab at the top of the page, then complete the form provided.

We also stand behind it with a knowledgeable, dedicated Customer

Care department, so should you ever have a problem, you'll receive fast, considerate assistance.

Should you need any support from us, please visit www.tevo.co.za

or call 0861 77 88 88.

PLEASE KEEP THIS USER GUIDE IN A SAFE PLACE AND

READ IT CAREFULLY BEFORE USING YOUR BENNETT READ

TOUGH 12 VACUUM FOR THE FIRST TIME.

Images are for instructional use only and may differ slightly from the actual product.

1

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS

BEFORE USING YOUR VACUUM.

When using your Tough 12, basic safety precautions should be observed, including the following:

!

WARNING

TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK, OR INJURY:

» Use the system only for its intended use

» To protect against a risk of electric shock,

do not immerse any part of the system in

water or other liquids

» Do not allow cord to touch hot surfaces

» Do not run appliance over cord

» Do not operate the system with a damaged cord or plug, or if the appliance or any other part of the system has been dropped or damaged. To avoid the risk of electric shock, do not disassemble or attempt to repair your Tough 12. Return the unit for examination and repair.

Incorrect reassembly or repair can cause a risk of electrical shock or injury and will not be covered by the guarantee

» Keep hair, loose clothing, fingers and

all parts of body away from openings

and moving parts

» Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present

» Do not pick up anything that is burning or smoking such as cigarettes, matches or hot ashes

» Use extra care when cleaning on stairs

» Do not use the Tough 12 without the

Filter Bag in place, except when vacuuming up liquids (Refer to page 4-7 for operating instructions). When using as a Wet Vacuum take caution not to over-fill the tank with liquid to avoid risk of electrical shock and damage to your

Tough 12. Refer to page 7 of this manual for tank capacity and instructions

» This appliance is intended for household use only. Follow all user instructions in this manual

» Do not leave the Tough 12 plugged in when unattended

» Unplug the electrical cord when not in

use and before servicing

» Not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge

» Do not allow to be used as a toy

» Close attention is necessary when used near children, pets or plants

» Children should be supervised to ensure that they do not play with the appliance

» Use only as described in this

manual. Use only manufacturer’s recommended accessories

» Do not pull cord, use cord as a handle,

close a door on cord, or pull cord around sharp edges or corners

» Turn off all controls as applicable before

unplugging from electrical outlet

» Do not unplug by pulling on cord.

To unplug, grasp the plug, not the cord

» Do not handle plug or vacuum with wet hands or operate without shoes

» Do not put any objects into openings

» Do not use with any opening blocked

» Keep free of dust, lint, hair and anything else that may reduce airflow

» Store your Tough 12 indoors in a cool, dry area

» Keep your work area well lit

» Keep end of hose, wands and other

openings away from your face and body

» Using improper voltage may result in damage to the motor and possible injury to the user. Correct voltage is listed on rating label. For operation on a

220-240V, 50/60Hz power supply only

» Use only identical replacement parts

» See instructions on page 9 for Servicing of Double-Insulated Appliances.

WARNING:

» To reduce the risk of injury from moving parts – Unplug before servicing

» To reduce the risk of electric shock –

Unplug before cleaning or servicing

» Do not use outdoors

SAVE THESE INSTRUCTIONS

FOR FUTURE USE.

Not For Commercial Use.

For Household Use Only.

2

PRODUCT VIEW

1. Power Switch

2. Motor Unit

3. Locking Clips

4. Dirt/Water Tank

5. Vacuum Function Hose Port

6. Caster Wheels

7. Blower Function Hose Port

8. Wand Storage Hook

9. Power Cord

ACCESSORIES:

10. Ultra-durable Flexi-Hose

11. Hose Handle With Variable

Airflow Control

12. 2-Piece Extension Wand

13. Floor Nozzle

14. Wet Floor Nozzle Attachment

15. Dry Floor Nozzle Attachment

16. Washable & Reusable

Filter Bag

17. Wet Vacuum Foam Filter

18. Foam Filter Securing

Lock

19. Combination Crevice/Upholstery Tool

13

12

3

11

15

14

16

17

18

3

10

1

2

5

4

6

19

9

7

8

ASSEMBLY INSTRUCTIONS:

Your Bennett Read Tough 12 comes almost fully assembled and requires very little set up:

1. Remove unit from packaging

2. Remove attachments from their packaging

3. Some of the packaging poses a choking risk to small children. Dispose of the packaging responsibly. Please recycle all plastic packaging

4. Before using for the first time check that all attachments listed

are included. If the unit is incomplete, return to the retailer

immediately. Take entire unit, packaging and proof of purchase

to the store where your purchase was made

5. Insert the Caster Wheels (6) at the bottom of the Dirt/Water Tank (4)

into the holes provided. Ensure the wheels go in all the way

OPERATIONS

Only operate your Bennett Read Tough 12 in accordance with the instruction manual. Failure to follow these instructions will result in decreased cleaning performance and may invalidate your guarantee.

DRY VACUUMING:

Your Bennett Read Tough 12 Vacuum is perfect for vacuuming carpets, tiles, mattresses, upholstery, curtains and car upholstery.

Setting up your Bennett Read Tough 12 for dry vacuuming:

1. Remove the Motor Unit (2) from the

Dirt/Water Tank (4) by pushing the

Locking Clips (3) outwards

4

2. Ensure that the Filter Bag (16) is securely installed in place as shown below:

3. Replace Motor Unit and push the Locking

Clips inwards to lock closed as shown below:

4. Insert the Flexi-Hose (10) into the Vacuum

Function Hose Port (5) and turn clockwise to lock in place as shown below:

5. Join the 2-Piece Extension Wand (12) together as shown below:

6. Attach the 2-Piece Extension Wand (12) to the Flexi-Hose Handle (11) as shown below:

7. Attach the Dry Floor Nozzle Attachment (15) to the Floor Nozzle (13) as shown below:

8. Attach the Floor Nozzle to the end of the

Extension Wand as shown below:

5

10. Alternatively, when dry vacuuming, attach the Combination

Crevice/Upholstery Tool (19) to suit your cleaning needs:

TIP:

To firmly attach the Extension

Wand and accessories together, give a slight twist once joined.

7. Plug the Power Cable (9) into a wall socket

8. Switch your Tough 12 on using the Power Switch (1)

9. Vacuum in different directions across your surfaces for best results

After each cleaning session it is advisable that the Filter Bag (16) be emptied and thoroughly rinsed and dried before storing.

WET VACUUMING:

Your Bennett Read Tough 12 can also suck up liquids* in and around your home.

Please note that the Bennett Read Tough 12 is NOT a carpet deep cleaner. Carpet deep cleaning should be done with a specialised deep cleaner such as the Bennett Read ONE.

Setting up your Bennett Read Tough 12 for wet vacuuming:

1. Remove the Motor Unit (2) from the Dirt/Water Tank (4) as explained on page 4

2. Remove the Filter Bag (16) from the Dirt/Water Tank in the reverse order as shown in step 2 on page 5

3. Install the Wet Vacuum Foam Filter (17) as shown below:

4. Fit the Foam Filter Securing Lock (18) and turn clockwise until secure as shown below:

IMPORTANT: The Filter Bag MUST be removed before vacuuming any liquids

6

7. Replace the Motor Unit (2) and secure the Locking Clips (3) in place

8. Insert the Flexi-Hose (10) into the Vacuum Function Hose Port (5) and turn clockwise to lock in place

5. Attach the Wet Floor Nozzle Attachment (14) to the Floor Nozzle (13) as shown below:

6. Attach the Floor Nozzle to the Extension

Wand (12):

Squeegee blade at front

9. Plug the Power Cable (9) into a wall socket

10. Switch your Tough 12 on using the Power Switch (1)

11. Vacuum the wet spill / liquid* from surface using a pulling action (squeegee blade at front)

12. When you are done, disconnect the Flexi-Hose (10) from the Motor Unit (2) by grasping the end of the hose nearest the Hose Port (5), turning it anticlockwise and then pulling the hose outward

13. Take the Dirt/Water Tank (4) to a sink or disposal area

14. Push the Locking Clips (3) outwards to unlock the Dirt/Water Tank

15. Lift the Motor Unit (2) from the Dirt/Water Tank and place it carefully on the ground

16. Carefully pour out the liquid from the Dirt/Water Tank

17. Rinse the Dirt/Water Tank under running water and dry it completely

* WARNING: Do not vacuum up boiling hot, flammable or combustible liquids

* Your Bennett Read Tough 12 is equipped with a float valve located at the bottom of the motor unit which will partially shut off the suction as soon as the tank reaches capacity. Immediately switch off the machine and empty the tank before continuing.

BLOWER FUNCTION:

Your Bennett Read Tough 12 has an additional function that allows you to blow away leaves and grass that collect on your covered patio areas, or sawdust in home workshops. Simply plug in and blow the dirt away.

Setting up your Bennett Read Tough 12 to use the blower function:

1. Remove the Motor Unit (2) from the

Dirt/Water Tank (4) by pushing the Locking

Clips (3) outwards

2. Ensure that the Filter Bag (16) is securely installed in place (see page 4 & 5 for Dry

Vacuuming)

3. Replace the Motor Unit and secure the

Locking Clips

5. Insert the small end (opposite end to handle) of the Flexi-Hose (10) into Blower Function

Hose Port (7), turn clockwise to lock in place

5

7

6. Attach the 2-Piece Extension Wand (12) to the Flexi-Hose Handle (11) (optional)

8. Plug the Power Cord (9) into a wall socket

9. Switch your Tough 12 on using the Power Switch (1)

MAINTENANCE AND CARE

EMPTYING THE FILTER BAG:

1. Disconnect the Flexi-Hose (10) from the Motor Unit (2) by grasping the end of the hose

nearest the Hose Port (5), turning it anticlockwise and then pulling the hose outward

2. Take the unit to a disposal area

3. Push the Locking Clips (3) outwards to unlock the Dirt/Water Tank (4)

4. Lift the Motor Unit from the Dirt/Water Tank and place it carefully on the ground

5. Remove the Filter Bag (16) by gently pulling upwards and then outwards as shown below:

6. Slide the Filter Bag open (as shown below) and empty the contents into a disposal area:

7. Rinse the Dirt/Water Tank under running water and dry it completely

CLEANING THE FILTER BAG:

The Filter Bag can be washed in warm water with a mild detergent. Allow the Filter Bag to dry completely before returning it to the machine for the next use.

8

TROUBLESHOOTING

PROBLEM

Machine not switching on

POSSIBLE CAUSES

1. Power cord not firmly plugged in

or not switched on at wall socket

1. Filter Bag dirty or clogged

REMEDIES

1. Check electrical plug

Weak suction power

2. Obstruction in Flexi-Hose, vacuum nozzle or extension pipes

Visible dust escaping from the machine while vacuuming

1. Filter Bag not installed

2. Filter Bag dirty

1. Remove and clean

Filter Bag as explained on page 8. It is important to check and clean the bag regularly

2. Remove Flexi-Hose, nozzle and extension pipes.

Clean and check for any obstructions

1. Check Filter Bag, situated inside the

Dirt/Water Tank

2. Clean Filter Bag as explained on page 8

Machine switches off during operation

(Thermal Cut-off

Switch)

1. Filters dirty or clogged, or the

Filter Bag is full

2. Obstruction in the Flexi-Hose or in

the extension tube

1. Clean or replace Filter

Bag as explained on page 8

2. Check and clean the

Flexi-Hose and the

Extension Wand

The machine will only switch on after it has cooled down sufficiently. Permanent damage will be caused to your machine if you continue to use it without addressing the root cause of the overheating as explained above

Other maintenance or service not included in the manual should be performed by an authorized Tevo service representative.

For any questions or concerns, please contact customer care listed on page 10.

TECHNICAL SPECIFICATIONS:

Nominal voltage: 220-240 V AC

Nominal frequency: 50/60 Hz

Power output : 800 - 1000W

Dirt Tank capacity : 12 Litres

9

CONSUMER GUARANTEE

Your BENNETT READ TOUGH 12 is guaranteed against manufacture faults for a period of 1 year. If you register your guarantee online at www.tevo.co.za within 14 days of purchase, then your guarantee will be extended to 2 years.

Tevo undertakes to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the guarantee period. This guarantee excludes damage caused by misuse, neglect, shipping accident, commercial use, incorrect installation, or unauthorized repair. Tevo is not liable for incidental or consequential damages of any nature associated with the use of this product. Tevo’s liability will not exceed the purchase price of this product.

PLEASE KEEP YOUR RECEIPT TO VERIFY YOUR GUARANTEE.

This guarantee applies to product used for personal or domestic use only, and specifically excludes any malfunction or defect arising from commercial use.

Guarantee and Service enquiries can be made by contacting:

Tevo (Pty) Ltd

Johannesburg (012) 740 5000

Durban (031) 570 5900

Cape Town (021) 380 0038/9

Customer Service Help Line: 0861 77 88 88 www.tevo.co.za

10

12

WET-DRY-BLOW VACUUM SYSTEM

®

PLEASE RECYCLE